From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 77B1BA0562; Thu, 15 Apr 2021 03:52:08 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 99AD5161E59; Thu, 15 Apr 2021 03:50:49 +0200 (CEST) Received: from mga01.intel.com (mga01.intel.com [192.55.52.88]) by mails.dpdk.org (Postfix) with ESMTP id 73258161E1E for ; Thu, 15 Apr 2021 03:50:38 +0200 (CEST) IronPort-SDR: hesmVimtt7gn4U+C0oltSXEoYU3JH8r+OR4+B0AWs05RlXuY+PFbOqpOxj6MVTPYNtGXqq4EDa g23RUf+uLCiw== X-IronPort-AV: E=McAfee;i="6200,9189,9954"; a="215272807" X-IronPort-AV: E=Sophos;i="5.82,223,1613462400"; d="scan'208";a="215272807" Received: from orsmga003.jf.intel.com ([10.7.209.27]) by fmsmga101.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Apr 2021 18:50:37 -0700 IronPort-SDR: UUyQCnOTc63yozUusJD3g+/qJ8vhawILRKUs5n5bITfjsNDcCAtLG1xyGNc2TtP45Y+4CexGna SPE4p+iQeyNg== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.82,223,1613462400"; d="scan'208";a="382569856" Received: from txasoft-yocto.an.intel.com ([10.123.72.192]) by orsmga003.jf.intel.com with ESMTP; 14 Apr 2021 18:50:37 -0700 From: Timothy McDaniel To: Cc: dev@dpdk.org, erik.g.carrillo@intel.com, harry.van.haaren@intel.com, jerinj@marvell.com, thomas@monjalon.net Date: Wed, 14 Apr 2021 20:49:04 -0500 Message-Id: <1618451359-20693-13-git-send-email-timothy.mcdaniel@intel.com> X-Mailer: git-send-email 1.7.10 In-Reply-To: <1618451359-20693-1-git-send-email-timothy.mcdaniel@intel.com> References: <20210316221857.2254-2-timothy.mcdaniel@intel.com> <1618451359-20693-1-git-send-email-timothy.mcdaniel@intel.com> Subject: [dpdk-dev] [PATCH v4 12/27] event/dlb2: add v2.5 map qid X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Update the low level HW functions responsible for mapping queues to ports. These functions also validate the map arguments and verify that the maximum number of queues linked to a load balanced port does not exceed the capabilities of the hardware. The logic is very similar to what was done for v2.0, but the new combined register map for v2.0 and v2.5 uses new register names and bit names. Additionally, new register access macros are used so that the code can perform the correct action, based on the hardware version, v2.0 or v2.5. Signed-off-by: Timothy McDaniel --- drivers/event/dlb2/pf/base/dlb2_resource.c | 355 --------------- .../event/dlb2/pf/base/dlb2_resource_new.c | 418 ++++++++++++++++++ 2 files changed, 418 insertions(+), 355 deletions(-) diff --git a/drivers/event/dlb2/pf/base/dlb2_resource.c b/drivers/event/dlb2/pf/base/dlb2_resource.c index 362deadfe..d59df5e39 100644 --- a/drivers/event/dlb2/pf/base/dlb2_resource.c +++ b/drivers/event/dlb2/pf/base/dlb2_resource.c @@ -1245,68 +1245,6 @@ dlb2_port_find_slot_with_pending_map_queue(struct dlb2_ldb_port *port, return (i < DLB2_MAX_NUM_QIDS_PER_LDB_CQ); } -static void dlb2_ldb_port_change_qid_priority(struct dlb2_hw *hw, - struct dlb2_ldb_port *port, - int slot, - struct dlb2_map_qid_args *args) -{ - union dlb2_lsp_cq2priov r0; - - /* Read-modify-write the priority and valid bit register */ - r0.val = DLB2_CSR_RD(hw, DLB2_LSP_CQ2PRIOV(port->id.phys_id)); - - r0.field.v |= 1 << slot; - r0.field.prio |= (args->priority & 0x7) << slot * 3; - - DLB2_CSR_WR(hw, DLB2_LSP_CQ2PRIOV(port->id.phys_id), r0.val); - - dlb2_flush_csr(hw); - - port->qid_map[slot].priority = args->priority; -} - -static int dlb2_verify_map_qid_slot_available(struct dlb2_ldb_port *port, - struct dlb2_ldb_queue *queue, - struct dlb2_cmd_response *resp) -{ - enum dlb2_qid_map_state state; - int i; - - /* Unused slot available? */ - if (port->num_mappings < DLB2_MAX_NUM_QIDS_PER_LDB_CQ) - return 0; - - /* - * If the queue is already mapped (from the application's perspective), - * this is simply a priority update. - */ - state = DLB2_QUEUE_MAPPED; - if (dlb2_port_find_slot_queue(port, state, queue, &i)) - return 0; - - state = DLB2_QUEUE_MAP_IN_PROG; - if (dlb2_port_find_slot_queue(port, state, queue, &i)) - return 0; - - if (dlb2_port_find_slot_with_pending_map_queue(port, queue, &i)) - return 0; - - /* - * If the slot contains an unmap in progress, it's considered - * available. - */ - state = DLB2_QUEUE_UNMAP_IN_PROG; - if (dlb2_port_find_slot(port, state, &i)) - return 0; - - state = DLB2_QUEUE_UNMAPPED; - if (dlb2_port_find_slot(port, state, &i)) - return 0; - - resp->status = DLB2_ST_NO_QID_SLOTS_AVAILABLE; - return -EINVAL; -} - static struct dlb2_ldb_queue * dlb2_get_domain_ldb_queue(u32 id, bool vdev_req, @@ -1355,299 +1293,6 @@ dlb2_get_domain_used_ldb_port(u32 id, return NULL; } -static int dlb2_verify_map_qid_args(struct dlb2_hw *hw, - u32 domain_id, - struct dlb2_map_qid_args *args, - struct dlb2_cmd_response *resp, - bool vdev_req, - unsigned int vdev_id) -{ - struct dlb2_hw_domain *domain; - struct dlb2_ldb_port *port; - struct dlb2_ldb_queue *queue; - int id; - - domain = dlb2_get_domain_from_id(hw, domain_id, vdev_req, vdev_id); - - if (domain == NULL) { - resp->status = DLB2_ST_INVALID_DOMAIN_ID; - return -EINVAL; - } - - if (!domain->configured) { - resp->status = DLB2_ST_DOMAIN_NOT_CONFIGURED; - return -EINVAL; - } - - id = args->port_id; - - port = dlb2_get_domain_used_ldb_port(id, vdev_req, domain); - - if (port == NULL || !port->configured) { - resp->status = DLB2_ST_INVALID_PORT_ID; - return -EINVAL; - } - - if (args->priority >= DLB2_QID_PRIORITIES) { - resp->status = DLB2_ST_INVALID_PRIORITY; - return -EINVAL; - } - - queue = dlb2_get_domain_ldb_queue(args->qid, vdev_req, domain); - - if (queue == NULL || !queue->configured) { - resp->status = DLB2_ST_INVALID_QID; - return -EINVAL; - } - - if (queue->domain_id.phys_id != domain->id.phys_id) { - resp->status = DLB2_ST_INVALID_QID; - return -EINVAL; - } - - if (port->domain_id.phys_id != domain->id.phys_id) { - resp->status = DLB2_ST_INVALID_PORT_ID; - return -EINVAL; - } - - return 0; -} - -static void dlb2_log_map_qid(struct dlb2_hw *hw, - u32 domain_id, - struct dlb2_map_qid_args *args, - bool vdev_req, - unsigned int vdev_id) -{ - DLB2_HW_DBG(hw, "DLB2 map QID arguments:\n"); - if (vdev_req) - DLB2_HW_DBG(hw, "(Request from vdev %d)\n", vdev_id); - DLB2_HW_DBG(hw, "\tDomain ID: %d\n", - domain_id); - DLB2_HW_DBG(hw, "\tPort ID: %d\n", - args->port_id); - DLB2_HW_DBG(hw, "\tQueue ID: %d\n", - args->qid); - DLB2_HW_DBG(hw, "\tPriority: %d\n", - args->priority); -} - -int dlb2_hw_map_qid(struct dlb2_hw *hw, - u32 domain_id, - struct dlb2_map_qid_args *args, - struct dlb2_cmd_response *resp, - bool vdev_req, - unsigned int vdev_id) -{ - struct dlb2_hw_domain *domain; - struct dlb2_ldb_queue *queue; - enum dlb2_qid_map_state st; - struct dlb2_ldb_port *port; - int ret, i, id; - u8 prio; - - dlb2_log_map_qid(hw, domain_id, args, vdev_req, vdev_id); - - /* - * Verify that hardware resources are available before attempting to - * satisfy the request. This simplifies the error unwinding code. - */ - ret = dlb2_verify_map_qid_args(hw, - domain_id, - args, - resp, - vdev_req, - vdev_id); - if (ret) - return ret; - - prio = args->priority; - - domain = dlb2_get_domain_from_id(hw, domain_id, vdev_req, vdev_id); - if (domain == NULL) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: domain not found\n", - __func__, __LINE__); - return -EFAULT; - } - - id = args->port_id; - - port = dlb2_get_domain_used_ldb_port(id, vdev_req, domain); - if (port == NULL) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: port not found\n", - __func__, __LINE__); - return -EFAULT; - } - - queue = dlb2_get_domain_ldb_queue(args->qid, vdev_req, domain); - if (queue == NULL) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: queue not found\n", - __func__, __LINE__); - return -EFAULT; - } - - /* - * If there are any outstanding detach operations for this port, - * attempt to complete them. This may be necessary to free up a QID - * slot for this requested mapping. - */ - if (port->num_pending_removals) - dlb2_domain_finish_unmap_port(hw, domain, port); - - ret = dlb2_verify_map_qid_slot_available(port, queue, resp); - if (ret) - return ret; - - /* Hardware requires disabling the CQ before mapping QIDs. */ - if (port->enabled) - dlb2_ldb_port_cq_disable(hw, port); - - /* - * If this is only a priority change, don't perform the full QID->CQ - * mapping procedure - */ - st = DLB2_QUEUE_MAPPED; - if (dlb2_port_find_slot_queue(port, st, queue, &i)) { - if (i >= DLB2_MAX_NUM_QIDS_PER_LDB_CQ) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: port slot tracking failed\n", - __func__, __LINE__); - return -EFAULT; - } - - if (prio != port->qid_map[i].priority) { - dlb2_ldb_port_change_qid_priority(hw, port, i, args); - DLB2_HW_DBG(hw, "DLB2 map: priority change\n"); - } - - st = DLB2_QUEUE_MAPPED; - ret = dlb2_port_slot_state_transition(hw, port, queue, i, st); - if (ret) - return ret; - - goto map_qid_done; - } - - st = DLB2_QUEUE_UNMAP_IN_PROG; - if (dlb2_port_find_slot_queue(port, st, queue, &i)) { - if (i >= DLB2_MAX_NUM_QIDS_PER_LDB_CQ) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: port slot tracking failed\n", - __func__, __LINE__); - return -EFAULT; - } - - if (prio != port->qid_map[i].priority) { - dlb2_ldb_port_change_qid_priority(hw, port, i, args); - DLB2_HW_DBG(hw, "DLB2 map: priority change\n"); - } - - st = DLB2_QUEUE_MAPPED; - ret = dlb2_port_slot_state_transition(hw, port, queue, i, st); - if (ret) - return ret; - - goto map_qid_done; - } - - /* - * If this is a priority change on an in-progress mapping, don't - * perform the full QID->CQ mapping procedure. - */ - st = DLB2_QUEUE_MAP_IN_PROG; - if (dlb2_port_find_slot_queue(port, st, queue, &i)) { - if (i >= DLB2_MAX_NUM_QIDS_PER_LDB_CQ) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: port slot tracking failed\n", - __func__, __LINE__); - return -EFAULT; - } - - port->qid_map[i].priority = prio; - - DLB2_HW_DBG(hw, "DLB2 map: priority change only\n"); - - goto map_qid_done; - } - - /* - * If this is a priority change on a pending mapping, update the - * pending priority - */ - if (dlb2_port_find_slot_with_pending_map_queue(port, queue, &i)) { - if (i >= DLB2_MAX_NUM_QIDS_PER_LDB_CQ) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: port slot tracking failed\n", - __func__, __LINE__); - return -EFAULT; - } - - port->qid_map[i].pending_priority = prio; - - DLB2_HW_DBG(hw, "DLB2 map: priority change only\n"); - - goto map_qid_done; - } - - /* - * If all the CQ's slots are in use, then there's an unmap in progress - * (guaranteed by dlb2_verify_map_qid_slot_available()), so add this - * mapping to pending_map and return. When the removal is completed for - * the slot's current occupant, this mapping will be performed. - */ - if (!dlb2_port_find_slot(port, DLB2_QUEUE_UNMAPPED, &i)) { - if (dlb2_port_find_slot(port, DLB2_QUEUE_UNMAP_IN_PROG, &i)) { - enum dlb2_qid_map_state st; - - if (i >= DLB2_MAX_NUM_QIDS_PER_LDB_CQ) { - DLB2_HW_ERR(hw, - "[%s():%d] Internal error: port slot tracking failed\n", - __func__, __LINE__); - return -EFAULT; - } - - port->qid_map[i].pending_qid = queue->id.phys_id; - port->qid_map[i].pending_priority = prio; - - st = DLB2_QUEUE_UNMAP_IN_PROG_PENDING_MAP; - - ret = dlb2_port_slot_state_transition(hw, port, queue, - i, st); - if (ret) - return ret; - - DLB2_HW_DBG(hw, "DLB2 map: map pending removal\n"); - - goto map_qid_done; - } - } - - /* - * If the domain has started, a special "dynamic" CQ->queue mapping - * procedure is required in order to safely update the CQ<->QID tables. - * The "static" procedure cannot be used when traffic is flowing, - * because the CQ<->QID tables cannot be updated atomically and the - * scheduler won't see the new mapping unless the queue's if_status - * changes, which isn't guaranteed. - */ - ret = dlb2_ldb_port_map_qid(hw, domain, port, queue, prio); - - /* If ret is less than zero, it's due to an internal error */ - if (ret < 0) - return ret; - -map_qid_done: - if (port->enabled) - dlb2_ldb_port_cq_enable(hw, port); - - resp->status = 0; - - return 0; -} - static void dlb2_log_unmap_qid(struct dlb2_hw *hw, u32 domain_id, struct dlb2_unmap_qid_args *args, diff --git a/drivers/event/dlb2/pf/base/dlb2_resource_new.c b/drivers/event/dlb2/pf/base/dlb2_resource_new.c index d4b401250..5277a2643 100644 --- a/drivers/event/dlb2/pf/base/dlb2_resource_new.c +++ b/drivers/event/dlb2/pf/base/dlb2_resource_new.c @@ -5058,3 +5058,421 @@ int dlb2_hw_create_dir_queue(struct dlb2_hw *hw, return 0; } +static bool +dlb2_port_find_slot_with_pending_map_queue(struct dlb2_ldb_port *port, + struct dlb2_ldb_queue *queue, + int *slot) +{ + int i; + + for (i = 0; i < DLB2_MAX_NUM_QIDS_PER_LDB_CQ; i++) { + struct dlb2_ldb_port_qid_map *map = &port->qid_map[i]; + + if (map->state == DLB2_QUEUE_UNMAP_IN_PROG_PENDING_MAP && + map->pending_qid == queue->id.phys_id) + break; + } + + *slot = i; + + return (i < DLB2_MAX_NUM_QIDS_PER_LDB_CQ); +} + +static int dlb2_verify_map_qid_slot_available(struct dlb2_ldb_port *port, + struct dlb2_ldb_queue *queue, + struct dlb2_cmd_response *resp) +{ + enum dlb2_qid_map_state state; + int i; + + /* Unused slot available? */ + if (port->num_mappings < DLB2_MAX_NUM_QIDS_PER_LDB_CQ) + return 0; + + /* + * If the queue is already mapped (from the application's perspective), + * this is simply a priority update. + */ + state = DLB2_QUEUE_MAPPED; + if (dlb2_port_find_slot_queue(port, state, queue, &i)) + return 0; + + state = DLB2_QUEUE_MAP_IN_PROG; + if (dlb2_port_find_slot_queue(port, state, queue, &i)) + return 0; + + if (dlb2_port_find_slot_with_pending_map_queue(port, queue, &i)) + return 0; + + /* + * If the slot contains an unmap in progress, it's considered + * available. + */ + state = DLB2_QUEUE_UNMAP_IN_PROG; + if (dlb2_port_find_slot(port, state, &i)) + return 0; + + state = DLB2_QUEUE_UNMAPPED; + if (dlb2_port_find_slot(port, state, &i)) + return 0; + + resp->status = DLB2_ST_NO_QID_SLOTS_AVAILABLE; + return -EINVAL; +} + +static struct dlb2_ldb_queue * +dlb2_get_domain_ldb_queue(u32 id, + bool vdev_req, + struct dlb2_hw_domain *domain) +{ + struct dlb2_list_entry *iter; + struct dlb2_ldb_queue *queue; + RTE_SET_USED(iter); + + if (id >= DLB2_MAX_NUM_LDB_QUEUES) + return NULL; + + DLB2_DOM_LIST_FOR(domain->used_ldb_queues, queue, iter) { + if ((!vdev_req && queue->id.phys_id == id) || + (vdev_req && queue->id.virt_id == id)) + return queue; + } + + return NULL; +} + +static struct dlb2_ldb_port * +dlb2_get_domain_used_ldb_port(u32 id, + bool vdev_req, + struct dlb2_hw_domain *domain) +{ + struct dlb2_list_entry *iter; + struct dlb2_ldb_port *port; + int i; + RTE_SET_USED(iter); + + if (id >= DLB2_MAX_NUM_LDB_PORTS) + return NULL; + + for (i = 0; i < DLB2_NUM_COS_DOMAINS; i++) { + DLB2_DOM_LIST_FOR(domain->used_ldb_ports[i], port, iter) { + if ((!vdev_req && port->id.phys_id == id) || + (vdev_req && port->id.virt_id == id)) + return port; + } + + DLB2_DOM_LIST_FOR(domain->avail_ldb_ports[i], port, iter) { + if ((!vdev_req && port->id.phys_id == id) || + (vdev_req && port->id.virt_id == id)) + return port; + } + } + + return NULL; +} + +static void dlb2_ldb_port_change_qid_priority(struct dlb2_hw *hw, + struct dlb2_ldb_port *port, + int slot, + struct dlb2_map_qid_args *args) +{ + u32 cq2priov; + + /* Read-modify-write the priority and valid bit register */ + cq2priov = DLB2_CSR_RD(hw, + DLB2_LSP_CQ2PRIOV(hw->ver, port->id.phys_id)); + + cq2priov |= (1 << (slot + DLB2_LSP_CQ2PRIOV_V_LOC)) & + DLB2_LSP_CQ2PRIOV_V; + cq2priov |= ((args->priority & 0x7) << slot * 3) & + DLB2_LSP_CQ2PRIOV_PRIO; + + DLB2_CSR_WR(hw, DLB2_LSP_CQ2PRIOV(hw->ver, port->id.phys_id), cq2priov); + + dlb2_flush_csr(hw); + + port->qid_map[slot].priority = args->priority; +} + +static int dlb2_verify_map_qid_args(struct dlb2_hw *hw, + u32 domain_id, + struct dlb2_map_qid_args *args, + struct dlb2_cmd_response *resp, + bool vdev_req, + unsigned int vdev_id, + struct dlb2_hw_domain **out_domain, + struct dlb2_ldb_port **out_port, + struct dlb2_ldb_queue **out_queue) +{ + struct dlb2_hw_domain *domain; + struct dlb2_ldb_queue *queue; + struct dlb2_ldb_port *port; + int id; + + domain = dlb2_get_domain_from_id(hw, domain_id, vdev_req, vdev_id); + + if (!domain) { + resp->status = DLB2_ST_INVALID_DOMAIN_ID; + return -EINVAL; + } + + if (!domain->configured) { + resp->status = DLB2_ST_DOMAIN_NOT_CONFIGURED; + return -EINVAL; + } + + id = args->port_id; + + port = dlb2_get_domain_used_ldb_port(id, vdev_req, domain); + + if (!port || !port->configured) { + resp->status = DLB2_ST_INVALID_PORT_ID; + return -EINVAL; + } + + if (args->priority >= DLB2_QID_PRIORITIES) { + resp->status = DLB2_ST_INVALID_PRIORITY; + return -EINVAL; + } + + queue = dlb2_get_domain_ldb_queue(args->qid, vdev_req, domain); + + if (!queue || !queue->configured) { + resp->status = DLB2_ST_INVALID_QID; + return -EINVAL; + } + + if (queue->domain_id.phys_id != domain->id.phys_id) { + resp->status = DLB2_ST_INVALID_QID; + return -EINVAL; + } + + if (port->domain_id.phys_id != domain->id.phys_id) { + resp->status = DLB2_ST_INVALID_PORT_ID; + return -EINVAL; + } + + *out_domain = domain; + *out_queue = queue; + *out_port = port; + + return 0; +} + +static void dlb2_log_map_qid(struct dlb2_hw *hw, + u32 domain_id, + struct dlb2_map_qid_args *args, + bool vdev_req, + unsigned int vdev_id) +{ + DLB2_HW_DBG(hw, "DLB2 map QID arguments:\n"); + if (vdev_req) + DLB2_HW_DBG(hw, "(Request from vdev %d)\n", vdev_id); + DLB2_HW_DBG(hw, "\tDomain ID: %d\n", + domain_id); + DLB2_HW_DBG(hw, "\tPort ID: %d\n", + args->port_id); + DLB2_HW_DBG(hw, "\tQueue ID: %d\n", + args->qid); + DLB2_HW_DBG(hw, "\tPriority: %d\n", + args->priority); +} + +/** + * dlb2_hw_map_qid() - map a load-balanced queue to a load-balanced port + * @hw: dlb2_hw handle for a particular device. + * @domain_id: domain ID. + * @args: map QID arguments. + * @resp: response structure. + * @vdev_req: indicates whether this request came from a vdev. + * @vdev_id: If vdev_req is true, this contains the vdev's ID. + * + * This function configures the DLB to schedule QEs from the specified queue + * to the specified port. Each load-balanced port can be mapped to up to 8 + * queues; each load-balanced queue can potentially map to all the + * load-balanced ports. + * + * A successful return does not necessarily mean the mapping was configured. If + * this function is unable to immediately map the queue to the port, it will + * add the requested operation to a per-port list of pending map/unmap + * operations, and (if it's not already running) launch a kernel thread that + * periodically attempts to process all pending operations. In a sense, this is + * an asynchronous function. + * + * This asynchronicity creates two views of the state of hardware: the actual + * hardware state and the requested state (as if every request completed + * immediately). If there are any pending map/unmap operations, the requested + * state will differ from the actual state. All validation is performed with + * respect to the pending state; for instance, if there are 8 pending map + * operations for port X, a request for a 9th will fail because a load-balanced + * port can only map up to 8 queues. + * + * A vdev can be either an SR-IOV virtual function or a Scalable IOV virtual + * device. + * + * Return: + * Returns 0 upon success, < 0 otherwise. If an error occurs, resp->status is + * assigned a detailed error code from enum dlb2_error. + * + * Errors: + * EINVAL - A requested resource is unavailable, invalid port or queue ID, or + * the domain is not configured. + * EFAULT - Internal error (resp->status not set). + */ +int dlb2_hw_map_qid(struct dlb2_hw *hw, + u32 domain_id, + struct dlb2_map_qid_args *args, + struct dlb2_cmd_response *resp, + bool vdev_req, + unsigned int vdev_id) +{ + struct dlb2_hw_domain *domain; + struct dlb2_ldb_queue *queue; + enum dlb2_qid_map_state st; + struct dlb2_ldb_port *port; + int ret, i; + u8 prio; + + dlb2_log_map_qid(hw, domain_id, args, vdev_req, vdev_id); + + /* + * Verify that hardware resources are available before attempting to + * satisfy the request. This simplifies the error unwinding code. + */ + ret = dlb2_verify_map_qid_args(hw, + domain_id, + args, + resp, + vdev_req, + vdev_id, + &domain, + &port, + &queue); + if (ret) + return ret; + + prio = args->priority; + + /* + * If there are any outstanding detach operations for this port, + * attempt to complete them. This may be necessary to free up a QID + * slot for this requested mapping. + */ + if (port->num_pending_removals) + dlb2_domain_finish_unmap_port(hw, domain, port); + + ret = dlb2_verify_map_qid_slot_available(port, queue, resp); + if (ret) + return ret; + + /* Hardware requires disabling the CQ before mapping QIDs. */ + if (port->enabled) + dlb2_ldb_port_cq_disable(hw, port); + + /* + * If this is only a priority change, don't perform the full QID->CQ + * mapping procedure + */ + st = DLB2_QUEUE_MAPPED; + if (dlb2_port_find_slot_queue(port, st, queue, &i)) { + if (prio != port->qid_map[i].priority) { + dlb2_ldb_port_change_qid_priority(hw, port, i, args); + DLB2_HW_DBG(hw, "DLB2 map: priority change\n"); + } + + st = DLB2_QUEUE_MAPPED; + ret = dlb2_port_slot_state_transition(hw, port, queue, i, st); + if (ret) + return ret; + + goto map_qid_done; + } + + st = DLB2_QUEUE_UNMAP_IN_PROG; + if (dlb2_port_find_slot_queue(port, st, queue, &i)) { + if (prio != port->qid_map[i].priority) { + dlb2_ldb_port_change_qid_priority(hw, port, i, args); + DLB2_HW_DBG(hw, "DLB2 map: priority change\n"); + } + + st = DLB2_QUEUE_MAPPED; + ret = dlb2_port_slot_state_transition(hw, port, queue, i, st); + if (ret) + return ret; + + goto map_qid_done; + } + + /* + * If this is a priority change on an in-progress mapping, don't + * perform the full QID->CQ mapping procedure. + */ + st = DLB2_QUEUE_MAP_IN_PROG; + if (dlb2_port_find_slot_queue(port, st, queue, &i)) { + port->qid_map[i].priority = prio; + + DLB2_HW_DBG(hw, "DLB2 map: priority change only\n"); + + goto map_qid_done; + } + + /* + * If this is a priority change on a pending mapping, update the + * pending priority + */ + if (dlb2_port_find_slot_with_pending_map_queue(port, queue, &i)) { + port->qid_map[i].pending_priority = prio; + + DLB2_HW_DBG(hw, "DLB2 map: priority change only\n"); + + goto map_qid_done; + } + + /* + * If all the CQ's slots are in use, then there's an unmap in progress + * (guaranteed by dlb2_verify_map_qid_slot_available()), so add this + * mapping to pending_map and return. When the removal is completed for + * the slot's current occupant, this mapping will be performed. + */ + if (!dlb2_port_find_slot(port, DLB2_QUEUE_UNMAPPED, &i)) { + if (dlb2_port_find_slot(port, DLB2_QUEUE_UNMAP_IN_PROG, &i)) { + enum dlb2_qid_map_state new_st; + + port->qid_map[i].pending_qid = queue->id.phys_id; + port->qid_map[i].pending_priority = prio; + + new_st = DLB2_QUEUE_UNMAP_IN_PROG_PENDING_MAP; + + ret = dlb2_port_slot_state_transition(hw, port, queue, + i, new_st); + if (ret) + return ret; + + DLB2_HW_DBG(hw, "DLB2 map: map pending removal\n"); + + goto map_qid_done; + } + } + + /* + * If the domain has started, a special "dynamic" CQ->queue mapping + * procedure is required in order to safely update the CQ<->QID tables. + * The "static" procedure cannot be used when traffic is flowing, + * because the CQ<->QID tables cannot be updated atomically and the + * scheduler won't see the new mapping unless the queue's if_status + * changes, which isn't guaranteed. + */ + ret = dlb2_ldb_port_map_qid(hw, domain, port, queue, prio); + + /* If ret is less than zero, it's due to an internal error */ + if (ret < 0) + return ret; + +map_qid_done: + if (port->enabled) + dlb2_ldb_port_cq_enable(hw, port); + + resp->status = 0; + + return 0; +} -- 2.23.0