DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <andrew.rybchenko@oktetlabs.ru>
Subject: [dpdk-dev] [PATCH v14] app/testpmd: support multi-process
Date: Tue, 15 Jun 2021 20:23:38 +0800
Message-ID: <1623759818-48549-1-git-send-email-humin29@huawei.com> (raw)
In-Reply-To: <1615430867-29992-1-git-send-email-humin29@huawei.com>

This patch adds multi-process support for testpmd.
The test cmd example as follows:
the primary cmd:
./dpdk-testpmd -a xxx --proc-type=auto -l 0-1 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=0

the secondary cmd:
./dpdk-testpmd -a xxx --proc-type=auto -l 2-3 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=1

Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
v14:
* Fixed comments by Andrew Rybchenko.

v13:
* Modified the doc syntax.

v12:
* Updated doc info.

v11:
* Fixed some minor syntax.

v10:
* Hid process type checks behind new functions.
* Added comments.

v9:
* Updated release notes and rst doc.
* Deleted deprecated codes.
* move macro and variable.

v8:
* Added warning info about queue numbers and process numbers.

v7:
* Fixed compiling error for unexpected unindent.

v6:
* Add rte flow description for multiple process.

v5:
* Fixed run_app.rst for multiple process description.
* Fix compiling error.

v4:
* Fixed minimum vlaue of Rxq or Txq in doc.

v3:
* Fixed compiling error using gcc10.0.

v2:
* Added document for this patch.
---
 app/test-pmd/cmdline.c                 |   6 ++
 app/test-pmd/config.c                  |  20 +++++-
 app/test-pmd/parameters.c              |   9 +++
 app/test-pmd/testpmd.c                 | 121 ++++++++++++++++++++++++++-------
 app/test-pmd/testpmd.h                 |   9 +++
 doc/guides/rel_notes/release_21_08.rst |   2 +-
 doc/guides/testpmd_app_ug/run_app.rst  |  70 +++++++++++++++++++
 7 files changed, 212 insertions(+), 25 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0268b18..a215b12 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -5463,6 +5463,12 @@ cmd_set_flush_rx_parsed(void *parsed_result,
 		__rte_unused void *data)
 {
 	struct cmd_set_flush_rx *res = parsed_result;
+
+	if (num_procs > 1 && (strcmp(res->mode, "on") == 0)) {
+		printf("multi-process doesn't support to flush Rx queues.\n");
+		return;
+	}
+
 	no_flush_rx = (uint8_t)((strcmp(res->mode, "on") == 0) ? 0 : 1);
 }
 
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 43c79b5..a0c24bb 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2976,6 +2976,8 @@ rss_fwd_config_setup(void)
 	queueid_t  rxq;
 	queueid_t  nb_q;
 	streamid_t  sm_id;
+	int start;
+	int end;
 
 	nb_q = nb_rxq;
 	if (nb_q > nb_txq)
@@ -2993,7 +2995,21 @@ rss_fwd_config_setup(void)
 	init_fwd_streams();
 
 	setup_fwd_config_of_each_lcore(&cur_fwd_config);
-	rxp = 0; rxq = 0;
+
+	if (proc_id > 0 && nb_q % num_procs != 0)
+		printf("Warning! queue numbers should be multiple of processes, or packet loss will happen.\n");
+
+	/**
+	 * In multi-process, All queues are allocated to different
+	 * processes based on num_procs and proc_id. For example:
+	 * if supports 4 queues(nb_q), 2 processes(num_procs),
+	 * the 0~1 queue for primary process.
+	 * the 2~3 queue for secondary process.
+	 */
+	start = proc_id * nb_q / num_procs;
+	end = start + nb_q / num_procs;
+	rxp = 0;
+	rxq = start;
 	for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
 		struct fwd_stream *fs;
 
@@ -3010,6 +3026,8 @@ rss_fwd_config_setup(void)
 			continue;
 		rxp = 0;
 		rxq++;
+		if (rxq >= end)
+			rxq = start;
 	}
 }
 
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index f3954c1..0f09841 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -508,6 +508,9 @@ parse_link_speed(int n)
 void
 launch_args_parse(int argc, char** argv)
 {
+#define PARAM_PROC_ID "proc-id"
+#define PARAM_NUM_PROCS "num-procs"
+
 	int n, opt;
 	char **argvopt;
 	int opt_idx;
@@ -625,6 +628,8 @@ launch_args_parse(int argc, char** argv)
 		{ "rx-mq-mode",                 1, 0, 0 },
 		{ "record-core-cycles",         0, 0, 0 },
 		{ "record-burst-stats",         0, 0, 0 },
+		{ PARAM_NUM_PROCS,              1, 0, 0 },
+		{ PARAM_PROC_ID,                1, 0, 0 },
 		{ 0, 0, 0, 0 },
 	};
 
@@ -1391,6 +1396,10 @@ launch_args_parse(int argc, char** argv)
 				record_core_cycles = 1;
 			if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
 				record_burst_stats = 1;
+			if (!strcmp(lgopts[opt_idx].name, PARAM_NUM_PROCS))
+				num_procs = atoi(optarg);
+			if (!strcmp(lgopts[opt_idx].name, PARAM_PROC_ID))
+				proc_id = atoi(optarg);
 			break;
 		case 'h':
 			usage(argv[0]);
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 8ed1b97..6eaf8f8 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -515,6 +515,62 @@ enum rte_eth_rx_mq_mode rx_mq_mode = ETH_MQ_RX_VMDQ_DCB_RSS;
  */
 uint32_t eth_link_speed;
 
+/*
+ * ID of the current process in multi-process, used to
+ * configure the queues to be polled.
+ */
+int proc_id;
+
+/*
+ * Number of processes in multi-process, used to
+ * configure the queues to be polled.
+ */
+unsigned int num_procs = 1;
+
+static int
+eth_dev_configure_mp(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
+		      const struct rte_eth_conf *dev_conf)
+{
+	if (is_proc_primary())
+		return rte_eth_dev_configure(port_id, nb_rx_q, nb_tx_q,
+					dev_conf);
+	return 0;
+}
+
+static int
+eth_dev_start_mp(uint16_t port_id)
+{
+	if (is_proc_primary())
+		return rte_eth_dev_start(port_id);
+
+	return 0;
+}
+
+static int
+eth_dev_stop_mp(uint16_t port_id)
+{
+	if (is_proc_primary())
+		return rte_eth_dev_stop(port_id);
+
+	return 0;
+}
+
+static void
+mempool_free_mp(struct rte_mempool *mp)
+{
+	if (is_proc_primary())
+		rte_mempool_free(mp);
+}
+
+static int
+eth_dev_set_mtu_mp(uint16_t port_id, uint16_t mtu)
+{
+	if (is_proc_primary())
+		return rte_eth_dev_set_mtu(port_id, mtu);
+
+	return 0;
+}
+
 /* Forward function declarations */
 static void setup_attached_port(portid_t pi);
 static void check_all_ports_link_status(uint32_t port_mask);
@@ -974,6 +1030,15 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
 	mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
 	mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name), size_idx);
 
+	if (!is_proc_primary()) {
+		rte_mp = rte_mempool_lookup(pool_name);
+		if (rte_mp == NULL)
+			rte_exit(EXIT_FAILURE,
+				"Get mbuf pool for socket %u failed: %s\n",
+				socket_id, rte_strerror(rte_errno));
+		return rte_mp;
+	}
+
 	TESTPMD_LOG(INFO,
 		"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
 		pool_name, nb_mbuf, mbuf_seg_size, socket_id);
@@ -1995,6 +2060,11 @@ flush_fwd_rx_queues(void)
 	uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
 	uint64_t timer_period;
 
+	if (num_procs > 1) {
+		printf("multi-process not support for flushing fwd Rx queues, skip the below lines and return.\n");
+		return;
+	}
+
 	/* convert to number of cycles */
 	timer_period = rte_get_timer_hz(); /* 1 second timeout */
 
@@ -2482,21 +2552,24 @@ start_port(portid_t pid)
 				return -1;
 			}
 			/* configure port */
-			diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
-						     nb_txq + nb_hairpinq,
-						     &(port->dev_conf));
+			diag = eth_dev_configure_mp(pi,
+					     nb_rxq + nb_hairpinq,
+					     nb_txq + nb_hairpinq,
+					     &(port->dev_conf));
 			if (diag != 0) {
-				if (rte_atomic16_cmpset(&(port->port_status),
-				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
-					printf("Port %d can not be set back "
-							"to stopped\n", pi);
+				if (rte_atomic16_cmpset(
+						&(port->port_status),
+						RTE_PORT_HANDLING,
+						RTE_PORT_STOPPED) == 0)
+					printf("Port %d cannot be set back to stopped\n",
+						pi);
 				printf("Fail to configure port %d\n", pi);
 				/* try to reconfigure port next time */
 				port->need_reconfig = 1;
 				return -1;
 			}
 		}
-		if (port->need_reconfig_queues > 0) {
+		if (port->need_reconfig_queues > 0 && is_proc_primary()) {
 			port->need_reconfig_queues = 0;
 			/* setup tx queues */
 			for (qi = 0; qi < nb_txq; qi++) {
@@ -2519,8 +2592,8 @@ start_port(portid_t pid)
 				if (rte_atomic16_cmpset(&(port->port_status),
 							RTE_PORT_HANDLING,
 							RTE_PORT_STOPPED) == 0)
-					printf("Port %d can not be set back "
-							"to stopped\n", pi);
+					printf("Port %d cannot be set back to stopped\n",
+						pi);
 				printf("Fail to configure port %d tx queues\n",
 				       pi);
 				/* try to reconfigure queues next time */
@@ -2597,16 +2670,16 @@ start_port(portid_t pid)
 		cnt_pi++;
 
 		/* start port */
-		diag = rte_eth_dev_start(pi);
+		diag = eth_dev_start_mp(pi);
 		if (diag < 0) {
 			printf("Fail to start port %d: %s\n", pi,
 			       rte_strerror(-diag));
 
 			/* Fail to setup rx queue, return */
 			if (rte_atomic16_cmpset(&(port->port_status),
-				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
-				printf("Port %d can not be set back to "
-							"stopped\n", pi);
+			RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
+				printf("Port %d cannot be set back to stopped\n",
+				       pi);
 			continue;
 		}
 
@@ -2731,7 +2804,7 @@ stop_port(portid_t pid)
 		if (port->flow_list)
 			port_flow_flush(pi);
 
-		if (rte_eth_dev_stop(pi) != 0)
+		if (eth_dev_stop_mp(pi) != 0)
 			RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
 				pi);
 
@@ -2800,8 +2873,10 @@ close_port(portid_t pid)
 			continue;
 		}
 
-		port_flow_flush(pi);
-		rte_eth_dev_close(pi);
+		if (is_proc_primary()) {
+			port_flow_flush(pi);
+			rte_eth_dev_close(pi);
+		}
 	}
 
 	remove_invalid_ports();
@@ -3067,7 +3142,7 @@ pmd_test_exit(void)
 	}
 	for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
 		if (mempools[i])
-			rte_mempool_free(mempools[i]);
+			mempool_free_mp(mempools[i]);
 	}
 
 	printf("\nBye...\n");
@@ -3398,7 +3473,7 @@ update_jumbo_frame_offload(portid_t portid)
 	 * if unset do it here
 	 */
 	if ((rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
-		ret = rte_eth_dev_set_mtu(portid,
+		ret = eth_dev_set_mtu_mp(portid,
 				port->dev_conf.rxmode.max_rx_pkt_len - eth_overhead);
 		if (ret)
 			printf("Failed to set MTU to %u for port %u\n",
@@ -3588,6 +3663,10 @@ init_port_dcb_config(portid_t pid,
 	int retval;
 	uint16_t i;
 
+	if (num_procs > 1) {
+		printf("The multi-process feature doesn't support dcb.\n");
+		return -ENOTSUP;
+	}
 	rte_port = &ports[pid];
 
 	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
@@ -3754,10 +3833,6 @@ main(int argc, char** argv)
 		rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n",
 			 rte_strerror(rte_errno));
 
-	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
-		rte_exit(EXIT_FAILURE,
-			 "Secondary process type not supported.\n");
-
 	ret = register_eth_event_callback();
 	if (ret != 0)
 		rte_exit(EXIT_FAILURE, "Cannot register for ethdev events");
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 283b5e3..76e10b5 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -631,6 +631,15 @@ extern enum rte_eth_rx_mq_mode rx_mq_mode;
 
 extern struct rte_flow_action_conntrack conntrack_context;
 
+extern int proc_id;
+extern unsigned int num_procs;
+
+static inline bool
+is_proc_primary(void)
+{
+	return rte_eal_process_type() == RTE_PROC_PRIMARY;
+}
+
 static inline unsigned int
 lcore_num(void)
 {
diff --git a/doc/guides/rel_notes/release_21_08.rst b/doc/guides/rel_notes/release_21_08.rst
index a6ecfdf..4b1ea4c 100644
--- a/doc/guides/rel_notes/release_21_08.rst
+++ b/doc/guides/rel_notes/release_21_08.rst
@@ -54,7 +54,7 @@ New Features
      This section is a comment. Do not overwrite or remove it.
      Also, make sure to start the actual text at the margin.
      =======================================================
-
+   * Added support multi-process for testpmd.
 
 Removed Items
 -------------
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index eb48318..4c13a23 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -545,3 +545,73 @@ The command line options are:
 	bit 0 - two hairpin ports loop
 
     The default value is 0. Hairpin will use single port mode and implicit Tx flow mode.
+
+
+Testpmd Multi-Process Command-line Options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following are the command-line options for testpmd multi-process support:
+
+.. code-block:: console
+
+       primary process:
+       sudo ./dpdk-testpmd -a xxx --proc-type=auto -l 0-1 -- -i --rxq=4 --txq=4 \
+        --num-procs=2 --proc-id=0
+
+       secondary process:
+       sudo ./dpdk-testpmd -a xxx --proc-type=auto -l 2-3 -- -i --rxq=4 --txq=4 \
+        --num-procs=2 --proc-id=1
+
+The command line options are:
+
+*   ``--num-procs=N``
+
+    The number of processes which will be used.
+
+*   ``--proc-id=id``
+
+    The id of the current process (id < num-procs). id should be different in
+    primary process and secondary process, which starts from '0'.
+
+Calculation rule for queue:
+All queues are allocated to different processes based on ``proc_num`` and ``proc_id``.
+Calculation rule for the testpmd to allocate queues to each process:
+start(queue start id) = proc_id * nb_q / num_procs;
+end(queue end id) = start + nb_q / num_procs;
+
+For example, if testpmd supports 4 Tx and Rx queues
+the 0~1 for primary process
+the 2~3 for secondary process
+
+The number of rings should be a multiple of the number of processes. If not,
+redundant queues will exist after queues are allocated to processes. After RSS
+is enabled, packet loss occurs when traffic is sent to all processes at the same
+time. Some traffic enters redundant queues and cannot be forwarded.
+
+All the dev ops is supported in primary process. While secondary process is
+not permitted to allocate or release shared memory, so some ops are not supported
+as follows::
+``dev_configure``
+``dev_start``
+``dev_stop``
+``rx_queue_setup``
+``tx_queue_setup``
+``rx_queue_release``
+``tx_queue_release``
+
+So, any command from testpmd which calls those APIs will not be supported in
+secondary process, like::
+``port config all rxq|txq|rxd|txd <value>``
+``port config <port_id> rx_offload xxx on/off ``
+``port config <port_id> tx_offload xxx on/off``
+etc.
+
+Stats is supported, stats will not change when one quit and start, as they
+share the same buffer to store the stats. Flow rules are maintained in process
+level: primary and secondary has its own flow list (but one flow list in HW).
+The two can see all the queues, so setting the flow rules for the other is OK.
+But in the testpmd primary process receiving or transmitting packets from the
+queue allocated for secondary process is not permitted, and same for secondary
+process.
+
+Flow API and RSS are supported.
-- 
2.7.4


  parent reply	other threads:[~2021-06-15 12:24 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-08  9:46 [dpdk-dev] [RFC] " Lijun Ou
2021-01-08 10:28 ` Ferruh Yigit
2021-01-09  9:54   ` oulijun
2021-01-10 12:32 ` Wisam Monther
2021-01-12 14:13   ` oulijun
2021-01-12 14:21     ` Wisam Monther
2021-01-14  2:46       ` oulijun
2021-01-20 14:06 ` [dpdk-dev] [RFC V2] " Lijun Ou
2021-03-05  1:04   ` [dpdk-dev] [PATCH] " Lijun Ou
2021-03-05  4:05     ` Ajit Khaparde
2021-03-10 11:11       ` Min Hu (Connor)
2021-03-11  2:47     ` [dpdk-dev] [PATCH v2] " Min Hu (Connor)
2021-03-22  2:27       ` Ajit Khaparde
2021-03-22  6:35         ` Min Hu (Connor)
2021-06-15 12:23       ` Min Hu (Connor) [this message]
2021-07-02 12:09       ` [dpdk-dev] [PATCH v15] " Andrew Rybchenko
2021-07-02 12:47         ` Andrew Rybchenko
2021-07-08 12:20           ` Min Hu (Connor)
2021-07-08 12:30             ` Andrew Rybchenko
2021-07-08 12:51               ` Min Hu (Connor)
2021-07-10  3:50       ` [dpdk-dev] [PATCH v16] " Min Hu (Connor)
2021-07-24 11:45         ` Thomas Monjalon
2021-07-26  0:26           ` Min Hu (Connor)
2021-07-26  6:30             ` Thomas Monjalon
2021-07-26  7:28               ` Min Hu (Connor)
2021-08-02  1:51                 ` Min Hu (Connor)
2021-08-02  8:03                   ` Thomas Monjalon
2021-08-16 18:12                     ` Singh, Aman Deep
2021-08-24 12:18                       ` Ferruh Yigit
2021-08-24 13:27                         ` Min Hu (Connor)
2021-08-25  2:06       ` [dpdk-dev] [PATCH v17] " Min Hu (Connor)
2021-09-07 13:23         ` Ferruh Yigit
2021-09-08  0:48           ` Min Hu (Connor)
2021-03-11  9:07     ` [dpdk-dev] [PATCH v3] " Min Hu (Connor)
2021-03-20  0:58       ` Min Hu (Connor)
2021-03-22  7:07     ` [dpdk-dev] [PATCH v4] " Min Hu (Connor)
2021-03-22 11:19       ` Ferruh Yigit
2021-03-24  8:08       ` Li, Xiaoyun
2021-03-25 13:32         ` Min Hu (Connor)
2021-03-25 23:25           ` Ajit Khaparde
2021-03-26  6:46             ` Min Hu (Connor)
2021-03-25 13:17     ` [dpdk-dev] [PATCH v5] " Min Hu (Connor)
2021-03-26  6:46     ` [dpdk-dev] [PATCH v6] " Min Hu (Connor)
2021-03-26  8:52     ` [dpdk-dev] [PATCH v7] " Min Hu (Connor)
2021-03-29  7:51       ` Li, Xiaoyun
2021-03-30  1:48         ` Min Hu (Connor)
2021-03-30  1:48     ` [dpdk-dev] [PATCH v8] " Min Hu (Connor)
2021-03-30  2:17       ` Li, Xiaoyun
2021-03-30  6:36         ` Min Hu (Connor)
2021-03-30  3:11       ` Ajit Khaparde
2021-03-30  6:41         ` Min Hu (Connor)
2021-03-30 10:19           ` Ferruh Yigit
2021-03-30 10:43             ` Min Hu (Connor)
2021-04-08 10:32               ` Min Hu (Connor)
2021-04-08 13:27                 ` Ferruh Yigit
2021-04-09  0:45                   ` Min Hu (Connor)
2021-04-12 16:37       ` Ferruh Yigit
2021-04-15  7:54         ` Ferruh Yigit
2021-04-16  2:20           ` Min Hu (Connor)
2021-04-16  1:52     ` [dpdk-dev] [PATCH v9] " Min Hu (Connor)
2021-04-16 16:30       ` Ferruh Yigit
2021-04-17  6:12         ` Min Hu (Connor)
2021-04-17  6:12     ` [dpdk-dev] [PATCH v10] " Min Hu (Connor)
2021-04-17 22:21       ` Ferruh Yigit
2021-04-19  1:03         ` Min Hu (Connor)
2021-04-19  1:03     ` [dpdk-dev] [PATCH v11] " Min Hu (Connor)
2021-04-19 13:42       ` Ferruh Yigit
2021-04-21  9:08         ` Min Hu (Connor)
2021-04-21  8:36     ` [dpdk-dev] [PATCH v12] " Min Hu (Connor)
2021-04-22  1:18     ` [dpdk-dev] [PATCH v13] " Min Hu (Connor)
2021-06-08  8:42       ` Andrew Rybchenko
2021-06-08 10:22         ` Thomas Monjalon
2021-06-08 10:39           ` Andrew Rybchenko
2021-06-08 12:02             ` Thomas Monjalon
2021-06-08 12:36             ` Ferruh Yigit
2021-06-15 12:04         ` Min Hu (Connor)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1623759818-48549-1-git-send-email-humin29@huawei.com \
    --to=humin29@huawei.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git