From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 8A757A0A0C; Tue, 3 Aug 2021 13:34:05 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id D2950411DF; Tue, 3 Aug 2021 13:33:42 +0200 (CEST) Received: from szxga03-in.huawei.com (szxga03-in.huawei.com [45.249.212.189]) by mails.dpdk.org (Postfix) with ESMTP id EF6D5411BE for ; Tue, 3 Aug 2021 13:33:36 +0200 (CEST) Received: from dggemv703-chm.china.huawei.com (unknown [172.30.72.56]) by szxga03-in.huawei.com (SkyGuard) with ESMTP id 4GfCLN2Q1Xz82HF; Tue, 3 Aug 2021 19:28:44 +0800 (CST) Received: from dggpeml500024.china.huawei.com (7.185.36.10) by dggemv703-chm.china.huawei.com (10.3.19.46) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.2; Tue, 3 Aug 2021 19:33:34 +0800 Received: from localhost.localdomain (10.67.165.24) by dggpeml500024.china.huawei.com (7.185.36.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.2; Tue, 3 Aug 2021 19:33:34 +0800 From: Chengwen Feng To: , , , , , CC: , , , , , , , , , Date: Tue, 3 Aug 2021 19:29:44 +0800 Message-ID: <1627990189-36531-2-git-send-email-fengchengwen@huawei.com> X-Mailer: git-send-email 2.8.1 In-Reply-To: <1627990189-36531-1-git-send-email-fengchengwen@huawei.com> References: <1625231891-2963-1-git-send-email-fengchengwen@huawei.com> <1627990189-36531-1-git-send-email-fengchengwen@huawei.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.67.165.24] X-ClientProxiedBy: dggems702-chm.china.huawei.com (10.3.19.179) To dggpeml500024.china.huawei.com (7.185.36.10) X-CFilter-Loop: Reflected Subject: [dpdk-dev] [PATCH v13 1/6] dmadev: introduce DMA device library public APIs X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" The 'dmadevice' is a generic type of DMA device. This patch introduce the 'dmadevice' public APIs which expose generic operations that can enable configuration and I/O with the DMA devices. Signed-off-by: Chengwen Feng Acked-by: Bruce Richardson Acked-by: Morten Brørup Acked-by: Jerin Jacob --- doc/api/doxy-api-index.md | 1 + doc/api/doxy-api.conf.in | 1 + lib/dmadev/meson.build | 4 + lib/dmadev/rte_dmadev.h | 962 ++++++++++++++++++++++++++++++++++++++++++++++ lib/dmadev/version.map | 25 ++ lib/meson.build | 1 + 6 files changed, 994 insertions(+) create mode 100644 lib/dmadev/meson.build create mode 100644 lib/dmadev/rte_dmadev.h create mode 100644 lib/dmadev/version.map diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md index 1992107..ce08250 100644 --- a/doc/api/doxy-api-index.md +++ b/doc/api/doxy-api-index.md @@ -27,6 +27,7 @@ The public API headers are grouped by topics: [event_timer_adapter] (@ref rte_event_timer_adapter.h), [event_crypto_adapter] (@ref rte_event_crypto_adapter.h), [rawdev] (@ref rte_rawdev.h), + [dmadev] (@ref rte_dmadev.h), [metrics] (@ref rte_metrics.h), [bitrate] (@ref rte_bitrate.h), [latency] (@ref rte_latencystats.h), diff --git a/doc/api/doxy-api.conf.in b/doc/api/doxy-api.conf.in index 325a019..a44a92b 100644 --- a/doc/api/doxy-api.conf.in +++ b/doc/api/doxy-api.conf.in @@ -34,6 +34,7 @@ INPUT = @TOPDIR@/doc/api/doxy-api-index.md \ @TOPDIR@/lib/cmdline \ @TOPDIR@/lib/compressdev \ @TOPDIR@/lib/cryptodev \ + @TOPDIR@/lib/dmadev \ @TOPDIR@/lib/distributor \ @TOPDIR@/lib/efd \ @TOPDIR@/lib/ethdev \ diff --git a/lib/dmadev/meson.build b/lib/dmadev/meson.build new file mode 100644 index 0000000..6d5bd85 --- /dev/null +++ b/lib/dmadev/meson.build @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2021 HiSilicon Limited. + +headers = files('rte_dmadev.h') diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h new file mode 100644 index 0000000..1090b06 --- /dev/null +++ b/lib/dmadev/rte_dmadev.h @@ -0,0 +1,962 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2021 HiSilicon Limited. + * Copyright(c) 2021 Intel Corporation. + * Copyright(c) 2021 Marvell International Ltd. + * Copyright(c) 2021 SmartShare Systems. + */ + +#ifndef _RTE_DMADEV_H_ +#define _RTE_DMADEV_H_ + +/** + * @file rte_dmadev.h + * + * RTE DMA (Direct Memory Access) device APIs. + * + * The DMA framework is built on the following model: + * + * --------------- --------------- --------------- + * | virtual DMA | | virtual DMA | | virtual DMA | + * | channel | | channel | | channel | + * --------------- --------------- --------------- + * | | | + * ------------------ | + * | | + * ------------ ------------ + * | dmadev | | dmadev | + * ------------ ------------ + * | | + * ------------------ ------------------ + * | HW-DMA-channel | | HW-DMA-channel | + * ------------------ ------------------ + * | | + * -------------------------------- + * | + * --------------------- + * | HW-DMA-Controller | + * --------------------- + * + * The DMA controller could have multiple HW-DMA-channels (aka. HW-DMA-queues), + * each HW-DMA-channel should be represented by a dmadev. + * + * The dmadev could create multiple virtual DMA channels, each virtual DMA + * channel represents a different transfer context. The DMA operation request + * must be submitted to the virtual DMA channel. e.g. Application could create + * virtual DMA channel 0 for memory-to-memory transfer scenario, and create + * virtual DMA channel 1 for memory-to-device transfer scenario. + * + * The dmadev are dynamically allocated by rte_dmadev_pmd_allocate() during the + * PCI/SoC device probing phase performed at EAL initialization time. And could + * be released by rte_dmadev_pmd_release() during the PCI/SoC device removing + * phase. + * + * This framework uses 'uint16_t dev_id' as the device identifier of a dmadev, + * and 'uint16_t vchan' as the virtual DMA channel identifier in one dmadev. + * + * The functions exported by the dmadev API to setup a device designated by its + * device identifier must be invoked in the following order: + * - rte_dmadev_configure() + * - rte_dmadev_vchan_setup() + * - rte_dmadev_start() + * + * Then, the application can invoke dataplane APIs to process jobs. + * + * If the application wants to change the configuration (i.e. invoke + * rte_dmadev_configure() or rte_dmadev_vchan_setup()), it must invoke + * rte_dmadev_stop() first to stop the device and then do the reconfiguration + * before invoking rte_dmadev_start() again. The dataplane APIs should not be + * invoked when the device is stopped. + * + * Finally, an application can close a dmadev by invoking the + * rte_dmadev_close() function. + * + * The dataplane APIs include two parts: + * The first part is the submission of operation requests: + * - rte_dmadev_copy() + * - rte_dmadev_copy_sg() + * - rte_dmadev_fill() + * - rte_dmadev_submit() + * + * These APIs could work with different virtual DMA channels which have + * different contexts. + * + * The first three APIs are used to submit the operation request to the virtual + * DMA channel, if the submission is successful, an uint16_t ring_idx is + * returned, otherwise a negative number is returned. + * + * The last API was used to issue doorbell to hardware, and also there are flags + * (@see RTE_DMA_OP_FLAG_SUBMIT) parameter of the first three APIs could do the + * same work. + * + * The second part is to obtain the result of requests: + * - rte_dmadev_completed() + * - return the number of operation requests completed successfully. + * - rte_dmadev_completed_status() + * - return the number of operation requests completed. + * + * @note If the dmadev works in silent mode (@see RTE_DMADEV_CAPA_SILENT), + * application does not invoke the above two completed APIs. + * + * About the ring_idx which enqueue APIs (e.g. rte_dmadev_copy() + * rte_dmadev_fill()) returned, the rules are as follows: + * - ring_idx for each virtual DMA channel are independent. + * - For a virtual DMA channel, the ring_idx is monotonically incremented, + * when it reach UINT16_MAX, it wraps back to zero. + * - This ring_idx can be used by applications to track per-operation + * metadata in an application-defined circular ring. + * - The initial ring_idx of a virtual DMA channel is zero, after the + * device is stopped, the ring_idx needs to be reset to zero. + * + * One example: + * - step-1: start one dmadev + * - step-2: enqueue a copy operation, the ring_idx return is 0 + * - step-3: enqueue a copy operation again, the ring_idx return is 1 + * - ... + * - step-101: stop the dmadev + * - step-102: start the dmadev + * - step-103: enqueue a copy operation, the cookie return is 0 + * - ... + * - step-x+0: enqueue a fill operation, the ring_idx return is 65535 + * - step-x+1: enqueue a copy operation, the ring_idx return is 0 + * - ... + * + * The DMA operation address used in enqueue APIs (i.e. rte_dmadev_copy(), + * rte_dmadev_copy_sg(), rte_dmadev_fill()) defined as rte_iova_t type. The + * dmadev supports two types of address: memory address and device address. + * + * - memory address: the source and destination address of the memory-to-memory + * transfer type, or the source address of the memory-to-device transfer type, + * or the destination address of the device-to-memory transfer type. + * @note If the device support SVA (@see RTE_DMADEV_CAPA_SVA), the memory + * address can be any VA address, otherwise it must be an IOVA address. + * + * - device address: the source and destination address of the device-to-device + * transfer type, or the source address of the device-to-memory transfer type, + * or the destination address of the memory-to-device transfer type. + * + * By default, all the functions of the dmadev API exported by a PMD are + * lock-free functions which assume to not be invoked in parallel on different + * logical cores to work on the same target dmadev object. + * @note Different virtual DMA channels on the same dmadev *DO NOT* support + * parallel invocation because these virtual DMA channels share the same + * HW-DMA-channel. + * + */ + +#include +#include +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +#define RTE_DMADEV_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Get the device identifier for the named DMA device. + * + * @param name + * DMA device name. + * + * @return + * Returns DMA device identifier on success. + * - <0: Failure to find named DMA device. + */ +__rte_experimental +int +rte_dmadev_get_dev_id(const char *name); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * @param dev_id + * DMA device index. + * + * @return + * - If the device index is valid (true) or not (false). + */ +__rte_experimental +bool +rte_dmadev_is_valid_dev(uint16_t dev_id); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Get the total number of DMA devices that have been successfully + * initialised. + * + * @return + * The total number of usable DMA devices. + */ +__rte_experimental +uint16_t +rte_dmadev_count(void); + +/* Enumerates DMA device capabilities. */ +#define RTE_DMADEV_CAPA_MEM_TO_MEM (1ull << 0) +/**< DMA device support memory-to-memory transfer. + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_MEM_TO_DEV (1ull << 1) +/**< DMA device support memory-to-device transfer. + * + * @see struct rte_dmadev_info::dev_capa + * @see struct rte_dmadev_port_param::port_type + */ + +#define RTE_DMADEV_CAPA_DEV_TO_MEM (1ull << 2) +/**< DMA device support device-to-memory transfer. + * + * @see struct rte_dmadev_info::dev_capa + * @see struct rte_dmadev_port_param::port_type + */ + +#define RTE_DMADEV_CAPA_DEV_TO_DEV (1ull << 3) +/**< DMA device support device-to-device transfer. + * + * @see struct rte_dmadev_info::dev_capa + * @see struct rte_dmadev_port_param::port_type + */ + +#define RTE_DMADEV_CAPA_SVA (1ull << 4) +/**< DMA device support SVA which could use VA as DMA address. + * If device support SVA then application could pass any VA address like memory + * from rte_malloc(), rte_memzone(), malloc, stack memory. + * If device don't support SVA, then application should pass IOVA address which + * from rte_malloc(), rte_memzone(). + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_SILENT (1ull << 5) +/**< DMA device support work in silent mode. + * In this mode, application don't required to invoke rte_dmadev_completed*() + * API. + * + * @see struct rte_dmadev_conf::silent_mode + */ + +#define RTE_DMADEV_CAPA_OPS_COPY (1ull << 32) +/**< DMA device support copy ops. + * This capability start with index of 32, so that it could leave gap between + * normal capability and ops capability. + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_OPS_COPY_SG (1ull << 33) +/**< DMA device support scatter-gather list copy ops. + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_OPS_FILL (1ull << 34) +/**< DMA device support fill ops. + * + * @see struct rte_dmadev_info::dev_capa + */ + +/** + * A structure used to retrieve the information of a DMA device. + */ +struct rte_dmadev_info { + struct rte_device *device; /**< Generic Device information. */ + uint64_t dev_capa; /**< Device capabilities (RTE_DMADEV_CAPA_*). */ + uint16_t max_vchans; + /**< Maximum number of virtual DMA channels supported. */ + uint16_t max_desc; + /**< Maximum allowed number of virtual DMA channel descriptors. */ + uint16_t min_desc; + /**< Minimum allowed number of virtual DMA channel descriptors. */ + uint16_t max_sges; + /**< Maximum number of source or destination scatter-gather entry + * supported. + * If the device does not support COPY_SG capability, this value can be + * zero. + * If the device supports COPY_SG capability, then rte_dmadev_copy_sg() + * parameter nb_src/nb_dst should not exceed this value. + */ + uint16_t nb_vchans; /**< Number of virtual DMA channel configured. */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve information of a DMA device. + * + * @param dev_id + * The identifier of the device. + * @param[out] dev_info + * A pointer to a structure of type *rte_dmadev_info* to be filled with the + * information of the device. + * + * @return + * - =0: Success, driver updates the information of the DMA device. + * - <0: Error code returned by the driver info get function. + */ +__rte_experimental +int +rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info); + +/** + * A structure used to configure a DMA device. + */ +struct rte_dmadev_conf { + uint16_t max_vchans; + /**< Maximum number of virtual DMA channel to use. + * This value cannot be greater than the field 'max_vchans' of struct + * rte_dmadev_info which get from rte_dmadev_info_get(). + */ + bool enable_silent; + /**< Indicates whether to enable silent mode. + * false-default mode, true-silent mode. + * This value can be set to true only when the SILENT capability is + * supported. + * + * @see RTE_DMADEV_CAPA_SILENT + */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Configure a DMA device. + * + * This function must be invoked first before any other function in the + * API. This function can also be re-invoked when a device is in the + * stopped state. + * + * @param dev_id + * The identifier of the device to configure. + * @param dev_conf + * The DMA device configuration structure encapsulated into rte_dmadev_conf + * object. + * + * @return + * - =0: Success, device configured. + * - <0: Error code returned by the driver configuration function. + */ +__rte_experimental +int +rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Start a DMA device. + * + * The device start step is the last one and consists of setting the DMA + * to start accepting jobs. + * + * @param dev_id + * The identifier of the device. + * + * @return + * - =0: Success, device started. + * - <0: Error code returned by the driver start function. + */ +__rte_experimental +int +rte_dmadev_start(uint16_t dev_id); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Stop a DMA device. + * + * The device can be restarted with a call to rte_dmadev_start(). + * + * @param dev_id + * The identifier of the device. + * + * @return + * - =0: Success, device stopped. + * - <0: Error code returned by the driver stop function. + */ +__rte_experimental +int +rte_dmadev_stop(uint16_t dev_id); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Close a DMA device. + * + * The device cannot be restarted after this call. + * + * @param dev_id + * The identifier of the device. + * + * @return + * - =0: Successfully close device + * - <0: Failure to close device + */ +__rte_experimental +int +rte_dmadev_close(uint16_t dev_id); + +/** + * rte_dma_direction - DMA transfer direction defines. + */ +enum rte_dma_direction { + RTE_DMA_DIR_MEM_TO_MEM, + /**< DMA transfer direction - from memory to memory. + * + * @see struct rte_dmadev_vchan_conf::direction + */ + RTE_DMA_DIR_MEM_TO_DEV, + /**< DMA transfer direction - from memory to device. + * In a typical scenario, the SoCs are installed on host servers as + * iNICs through the PCIe interface. In this case, the SoCs works in + * EP(endpoint) mode, it could initiate a DMA move request from memory + * (which is SoCs memory) to device (which is host memory). + * + * @see struct rte_dmadev_vchan_conf::direction + */ + RTE_DMA_DIR_DEV_TO_MEM, + /**< DMA transfer direction - from device to memory. + * In a typical scenario, the SoCs are installed on host servers as + * iNICs through the PCIe interface. In this case, the SoCs works in + * EP(endpoint) mode, it could initiate a DMA move request from device + * (which is host memory) to memory (which is SoCs memory). + * + * @see struct rte_dmadev_vchan_conf::direction + */ + RTE_DMA_DIR_DEV_TO_DEV, + /**< DMA transfer direction - from device to device. + * In a typical scenario, the SoCs are installed on host servers as + * iNICs through the PCIe interface. In this case, the SoCs works in + * EP(endpoint) mode, it could initiate a DMA move request from device + * (which is host memory) to the device (which is another host memory). + * + * @see struct rte_dmadev_vchan_conf::direction + */ +}; + +/** + * enum rte_dmadev_port_type - DMA access port type defines. + * + * @see struct rte_dmadev_port_param::port_type + */ +enum rte_dmadev_port_type { + RTE_DMADEV_PORT_NONE, + RTE_DMADEV_PORT_PCIE, /**< The DMA access port is PCIe. */ +}; + +/** + * A structure used to descript DMA access port parameters. + * + * @see struct rte_dmadev_vchan_conf::src_port + * @see struct rte_dmadev_vchan_conf::dst_port + */ +struct rte_dmadev_port_param { + enum rte_dmadev_port_type port_type; + /**< The device access port type. + * @see enum rte_dmadev_port_type + */ + union { + /** PCIe access port parameters. + * + * The following model shows SoC's PCIe module connects to + * multiple PCIe hosts and multiple endpoints. The PCIe module + * has an integrated DMA controller. + * + * If the DMA wants to access the memory of host A, it can be + * initiated by PF1 in core0, or by VF0 of PF0 in core0. + * + * \code{.unparsed} + * System Bus + * | ----------PCIe module---------- + * | Bus + * | Interface + * | ----- ------------------ + * | | | | PCIe Core0 | + * | | | | | ----------- + * | | | | PF-0 -- VF-0 | | Host A | + * | | |--------| |- VF-1 |--------| Root | + * | | | | PF-1 | | Complex | + * | | | | PF-2 | ----------- + * | | | ------------------ + * | | | + * | | | ------------------ + * | | | | PCIe Core1 | + * | | | | | ----------- + * | | | | PF-0 -- VF-0 | | Host B | + * |-----| |--------| PF-1 -- VF-0 |--------| Root | + * | | | | |- VF-1 | | Complex | + * | | | | PF-2 | ----------- + * | | | ------------------ + * | | | + * | | | ------------------ + * | |DMA| | | ------ + * | | | | |--------| EP | + * | | |--------| PCIe Core2 | ------ + * | | | | | ------ + * | | | | |--------| EP | + * | | | | | ------ + * | ----- ------------------ + * + * \endcode + * + * @note If some fields can not be supported by the + * hardware/driver, then the driver ignores those fields. + * Please check driver-specific documentation for limitations + * and capablites. + */ + struct { + uint64_t coreid : 4; /**< PCIe core id used. */ + uint64_t pfid : 8; /**< PF id used. */ + uint64_t vfen : 1; /**< VF enable bit. */ + uint64_t vfid : 16; /**< VF id used. */ + uint64_t pasid : 20; + /**< The pasid filed in TLP packet. */ + uint64_t attr : 3; + /**< The attributes filed in TLP packet. */ + uint64_t ph : 2; + /**< The processing hint filed in TLP packet. */ + uint64_t st : 16; + /**< The steering tag filed in TLP packet. */ + } pcie; + }; + uint64_t reserved[2]; /**< Reserved for future fields. */ +}; + +/** + * A structure used to configure a virtual DMA channel. + */ +struct rte_dmadev_vchan_conf { + enum rte_dma_direction direction; + /**< Transfer direction + * @see enum rte_dma_direction + */ + uint16_t nb_desc; + /**< Number of descriptor for the virtual DMA channel */ + struct rte_dmadev_port_param src_port; + /**< 1) Used to describes the device access port parameter in the + * device-to-memory transfer scenario. + * 2) Used to describes the source device access port parameter in the + * device-to-device transfer scenario. + * @see struct rte_dmadev_port_param + */ + struct rte_dmadev_port_param dst_port; + /**< 1) Used to describes the device access port parameter in the + * memory-to-device transfer scenario. + * 2) Used to describes the destination device access port parameter in + * the device-to-device transfer scenario. + * @see struct rte_dmadev_port_param + */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Allocate and set up a virtual DMA channel. + * + * @param dev_id + * The identifier of the device. + * @param conf + * The virtual DMA channel configuration structure encapsulated into + * rte_dmadev_vchan_conf object. + * + * @return + * - >=0: Allocate success, it is the virtual DMA channel id. This value must + * be less than the field 'max_vchans' of struct rte_dmadev_conf + * which configured by rte_dmadev_configure(). + * - <0: Error code returned by the driver virtual channel setup function. + */ +__rte_experimental +int +rte_dmadev_vchan_setup(uint16_t dev_id, + const struct rte_dmadev_vchan_conf *conf); + +/** + * rte_dmadev_stats - running statistics. + */ +struct rte_dmadev_stats { + uint64_t submitted_count; + /**< Count of operations which were submitted to hardware. */ + uint64_t completed_fail_count; + /**< Count of operations which failed to complete. */ + uint64_t completed_count; + /**< Count of operations which successfully complete. */ +}; + +#define RTE_DMADEV_ALL_VCHAN 0xFFFFu + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve basic statistics of a or all virtual DMA channel(s). + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * If equal RTE_DMADEV_ALL_VCHAN means all channels. + * @param[out] stats + * The basic statistics structure encapsulated into rte_dmadev_stats + * object. + * + * @return + * - =0: Successfully retrieve stats. + * - <0: Failure to retrieve stats. + */ +__rte_experimental +int +rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan, + struct rte_dmadev_stats *stats); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Reset basic statistics of a or all virtual DMA channel(s). + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * If equal RTE_DMADEV_ALL_VCHAN means all channels. + * + * @return + * - =0: Successfully reset stats. + * - <0: Failure to reset stats. + */ +__rte_experimental +int +rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Dump DMA device info. + * + * @param dev_id + * The identifier of the device. + * @param f + * The file to write the output to. + * + * @return + * 0 on success. Non-zero otherwise. + */ +__rte_experimental +int +rte_dmadev_dump(uint16_t dev_id, FILE *f); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Trigger the dmadev self test. + * + * @param dev_id + * The identifier of the device. + * + * @return + * - 0: Selftest successful. + * - -ENOTSUP if the device doesn't support selftest + * - other values < 0 on failure. + */ +__rte_experimental +int +rte_dmadev_selftest(uint16_t dev_id); + +/** + * rte_dma_status_code - DMA transfer result status code defines. + */ +enum rte_dma_status_code { + RTE_DMA_STATUS_SUCCESSFUL, + /**< The operation completed successfully. */ + RTE_DMA_STATUS_USER_ABORT, + /**< The operation failed to complete due abort by user. + * This is mainly used when processing dev_stop, user could modidy the + * descriptors (e.g. change one bit to tell hardware abort this job), + * it allows outstanding requests to be complete as much as possible, + * so reduce the time to stop the device. + */ + RTE_DMA_STATUS_NOT_ATTEMPTED, + /**< The operation failed to complete due to following scenarios: + * The jobs in a particular batch are not attempted because they + * appeared after a fence where a previous job failed. In some HW + * implementation it's possible for jobs from later batches would be + * completed, though, so report the status from the not attempted jobs + * before reporting those newer completed jobs. + */ + RTE_DMA_STATUS_INVALID_SRC_ADDR, + /**< The operation failed to complete due invalid source address. */ + RTE_DMA_STATUS_INVALID_DST_ADDR, + /**< The operation failed to complete due invalid destination + * address. + */ + RTE_DMA_STATUS_INVALID_ADDR, + /**< The operation failed to complete due invalid source or destination + * address, cover the case that only knows the address error, but not + * sure which address error. + */ + RTE_DMA_STATUS_INVALID_LENGTH, + /**< The operation failed to complete due invalid length. */ + RTE_DMA_STATUS_INVALID_OPCODE, + /**< The operation failed to complete due invalid opcode. + * The DMA descriptor could have multiple format, which are + * distinguished by the opcode field. + */ + RTE_DMA_STATUS_BUS_ERROR, + /**< The operation failed to complete due bus err. */ + RTE_DMA_STATUS_DATA_POISION, + /**< The operation failed to complete due data poison. */ + RTE_DMA_STATUS_DESCRIPTOR_READ_ERROR, + /**< The operation failed to complete due descriptor read error. */ + RTE_DMA_STATUS_DEV_LINK_ERROR, + /**< The operation failed to complete due device link error. + * Used to indicates that the link error in the memory-to-device/ + * device-to-memory/device-to-device transfer scenario. + */ + RTE_DMA_STATUS_ERROR_UNKNOWN = 0x100, + /**< The operation failed to complete due unknown reason. + * The initial value is 256, which reserves space for future errors. + */ +}; + +/** + * rte_dmadev_sge - can hold scatter-gather DMA operation request entry. + */ +struct rte_dmadev_sge { + rte_iova_t addr; /**< The DMA operation address. */ + uint32_t length; /**< The DMA operation length. */ +}; + +/* DMA flags to augment operation preparation. */ +#define RTE_DMA_OP_FLAG_FENCE (1ull << 0) +/**< DMA fence flag. + * It means the operation with this flag must be processed only after all + * previous operations are completed. + * If the specify DMA HW works in-order (it means it has default fence between + * operations), this flag could be NOP. + * + * @see rte_dmadev_copy() + * @see rte_dmadev_copy_sg() + * @see rte_dmadev_fill() + */ + +#define RTE_DMA_OP_FLAG_SUBMIT (1ull << 1) +/**< DMA submit flag. + * It means the operation with this flag must issue doorbell to hardware after + * enqueued jobs. + */ + +#define RTE_DMA_OP_FLAG_LLC (1ull << 2) +/**< DMA write data to low level cache hint. + * Used for performance optimization, this is just a hint, and there is no + * capability bit for this, driver should not return error if this flag was set. + */ + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Enqueue a copy operation onto the virtual DMA channel. + * + * This queues up a copy operation to be performed by hardware, if the 'flags' + * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin + * this operation, otherwise do not trigger doorbell. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param src + * The address of the source buffer. + * @param dst + * The address of the destination buffer. + * @param length + * The length of the data to be copied. + * @param flags + * An flags for this operation. + * @see RTE_DMA_OP_FLAG_* + * + * @return + * - 0..UINT16_MAX: index of enqueued copy job. + * - <0: Error code returned by the driver copy function. + */ +__rte_experimental +int +rte_dmadev_copy(uint16_t dev_id, uint16_t vchan, rte_iova_t src, rte_iova_t dst, + uint32_t length, uint64_t flags); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Enqueue a scatter-gather list copy operation onto the virtual DMA channel. + * + * This queues up a scatter-gather list copy operation to be performed by + * hardware, if the 'flags' parameter contains RTE_DMA_OP_FLAG_SUBMIT then + * trigger doorbell to begin this operation, otherwise do not trigger doorbell. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param src + * The pointer of source scatter-gather entry array. + * @param dst + * The pointer of destination scatter-gather entry array. + * @param nb_src + * The number of source scatter-gather entry. + * @see struct rte_dmadev_info::max_sges + * @param nb_dst + * The number of destination scatter-gather entry. + * @see struct rte_dmadev_info::max_sges + * @param flags + * An flags for this operation. + * @see RTE_DMA_OP_FLAG_* + * + * @return + * - 0..UINT16_MAX: index of enqueued copy scatter-gather list job. + * - <0: Error code returned by the driver copy scatter-gather list function. + */ +__rte_experimental +int +rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, struct rte_dmadev_sge *src, + struct rte_dmadev_sge *dst, uint16_t nb_src, uint16_t nb_dst, + uint64_t flags); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Enqueue a fill operation onto the virtual DMA channel. + * + * This queues up a fill operation to be performed by hardware, if the 'flags' + * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin + * this operation, otherwise do not trigger doorbell. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param pattern + * The pattern to populate the destination buffer with. + * @param dst + * The address of the destination buffer. + * @param length + * The length of the destination buffer. + * @param flags + * An flags for this operation. + * @see RTE_DMA_OP_FLAG_* + * + * @return + * - 0..UINT16_MAX: index of enqueued fill job. + * - <0: Error code returned by the driver fill function. + */ +__rte_experimental +int +rte_dmadev_fill(uint16_t dev_id, uint16_t vchan, uint64_t pattern, + rte_iova_t dst, uint32_t length, uint64_t flags); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Trigger hardware to begin performing enqueued operations. + * + * This API is used to write the "doorbell" to the hardware to trigger it + * to begin the operations previously enqueued by rte_dmadev_copy/fill(). + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * + * @return + * - =0: Successfully trigger hardware. + * - <0: Failure to trigger hardware. + */ +__rte_experimental +int +rte_dmadev_submit(uint16_t dev_id, uint16_t vchan); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Returns the number of operations that have been successfully completed. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param nb_cpls + * The maximum number of completed operations that can be processed. + * @param[out] last_idx + * The last completed operation's index. + * If not required, NULL can be passed in. + * @param[out] has_error + * Indicates if there are transfer error. + * If not required, NULL can be passed in. + * + * @return + * The number of operations that successfully completed. This return value + * must be less than or equal to the value of nb_cpls. + */ +__rte_experimental +uint16_t +rte_dmadev_completed(uint16_t dev_id, uint16_t vchan, const uint16_t nb_cpls, + uint16_t *last_idx, bool *has_error); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Returns the number of operations that have been completed, and the + * operations result may succeed or fail. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param nb_cpls + * Indicates the size of status array. + * @param[out] last_idx + * The last completed operation's index. + * If not required, NULL can be passed in. + * @param[out] status + * This is a pointer to an array of length 'nb_cpls' that holds the completion + * status code of each operation. + * @see enum rte_dma_status_code + * + * @return + * The number of operations that completed. This return value must be less + * than or equal to the value of nb_cpls. + * If this number is greater than zero (assuming n), then n values in the + * status array are also set. + */ +__rte_experimental +uint16_t +rte_dmadev_completed_status(uint16_t dev_id, uint16_t vchan, + const uint16_t nb_cpls, uint16_t *last_idx, + enum rte_dma_status_code *status); + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_DMADEV_H_ */ diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map new file mode 100644 index 0000000..02fffe3 --- /dev/null +++ b/lib/dmadev/version.map @@ -0,0 +1,25 @@ +EXPERIMENTAL { + global: + + rte_dmadev_close; + rte_dmadev_completed; + rte_dmadev_completed_status; + rte_dmadev_configure; + rte_dmadev_copy; + rte_dmadev_copy_sg; + rte_dmadev_count; + rte_dmadev_dump; + rte_dmadev_fill; + rte_dmadev_get_dev_id; + rte_dmadev_info_get; + rte_dmadev_is_valid_dev; + rte_dmadev_selftest; + rte_dmadev_start; + rte_dmadev_stats_get; + rte_dmadev_stats_reset; + rte_dmadev_stop; + rte_dmadev_submit; + rte_dmadev_vchan_setup; + + local: *; +}; diff --git a/lib/meson.build b/lib/meson.build index 1673ca4..a542c23 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -44,6 +44,7 @@ libraries = [ 'power', 'pdump', 'rawdev', + 'dmadev', 'regexdev', 'rib', 'reorder', -- 2.8.1