From: Huichao Cai <chcchc88@163.com>
To: dev@dpdk.org
Cc: konstantin.v.ananyev@yandex.ru
Subject: [PATCH v6] ip_frag: add IPv4 fragment copy packet API
Date: Sun, 24 Jul 2022 16:10:03 +0800 [thread overview]
Message-ID: <1658650203-7831-1-git-send-email-chcchc88@163.com> (raw)
In-Reply-To: <1658638211-6661-1-git-send-email-chcchc88@163.com>
Some NIC drivers support MBUF_FAST_FREE(Device supports optimization
for fast release of mbufs. When set application must guarantee that
per-queue all mbufs comes from the same mempool,has refcnt = 1,direct
and non-segmented.)offload. In order to adapt to this offload function,
add this API. Add some test data for this API.
Signed-off-by: Huichao Cai <chcchc88@163.com>
---
app/test/test_ipfrag.c | 9 +-
lib/ip_frag/rte_ip_frag.h | 34 +++++++
lib/ip_frag/rte_ipv4_fragmentation.c | 175 +++++++++++++++++++++++++++++++++++
lib/ip_frag/version.map | 1 +
4 files changed, 218 insertions(+), 1 deletion(-)
diff --git a/app/test/test_ipfrag.c b/app/test/test_ipfrag.c
index ba0ffd0..88cc4cd 100644
--- a/app/test/test_ipfrag.c
+++ b/app/test/test_ipfrag.c
@@ -418,10 +418,17 @@ static void ut_teardown(void)
}
if (tests[i].ipv == 4)
- len = rte_ipv4_fragment_packet(b, pkts_out, BURST,
+ if (i % 2)
+ len = rte_ipv4_fragment_packet(b, pkts_out, BURST,
tests[i].mtu_size,
direct_pool,
indirect_pool);
+ else
+ len = rte_ipv4_fragment_copy_nonseg_packet(b,
+ pkts_out,
+ BURST,
+ tests[i].mtu_size,
+ direct_pool);
else if (tests[i].ipv == 6)
len = rte_ipv6_fragment_packet(b, pkts_out, BURST,
tests[i].mtu_size,
diff --git a/lib/ip_frag/rte_ip_frag.h b/lib/ip_frag/rte_ip_frag.h
index 7d2abe1..4a2b150 100644
--- a/lib/ip_frag/rte_ip_frag.h
+++ b/lib/ip_frag/rte_ip_frag.h
@@ -179,6 +179,40 @@ int32_t rte_ipv4_fragment_packet(struct rte_mbuf *pkt_in,
struct rte_mempool *pool_indirect);
/**
+ * IPv4 fragmentation by copy.
+ *
+ * This function implements the fragmentation of IPv4 packets by copy
+ * non-segmented mbuf.
+ * This function is mainly used to adapt TX MBUF_FAST_FREE offload.
+ * MBUF_FAST_FREE: Device supports optimization for fast release of mbufs.
+ * When set application must guarantee that per-queue all mbufs comes from
+ * the same mempool,has refcnt = 1,direct and non-segmented.
+ *
+ * @param pkt_in
+ * The input packet.
+ * @param pkts_out
+ * Array storing the output fragments.
+ * @param nb_pkts_out
+ * Number of fragments.
+ * @param mtu_size
+ * Size in bytes of the Maximum Transfer Unit (MTU) for the outgoing IPv4
+ * datagrams. This value includes the size of the IPv4 header.
+ * @param pool_direct
+ * MBUF pool used for allocating direct buffers for the output fragments.
+ * @return
+ * Upon successful completion - number of output fragments placed
+ * in the pkts_out array.
+ * Otherwise - (-1) * errno.
+ */
+__rte_experimental
+int32_t
+rte_ipv4_fragment_copy_nonseg_packet(struct rte_mbuf *pkt_in,
+ struct rte_mbuf **pkts_out,
+ uint16_t nb_pkts_out,
+ uint16_t mtu_size,
+ struct rte_mempool *pool_direct);
+
+/**
* This function implements reassembly of fragmented IPv4 packets.
* Incoming mbufs should have its l2_len/l3_len fields setup correctly.
*
diff --git a/lib/ip_frag/rte_ipv4_fragmentation.c b/lib/ip_frag/rte_ipv4_fragmentation.c
index 27a8ad2..e6ec408 100644
--- a/lib/ip_frag/rte_ipv4_fragmentation.c
+++ b/lib/ip_frag/rte_ipv4_fragmentation.c
@@ -259,3 +259,178 @@ static inline uint16_t __create_ipopt_frag_hdr(uint8_t *iph,
return out_pkt_pos;
}
+
+/**
+ * IPv4 fragmentation by copy.
+ *
+ * This function implements the fragmentation of IPv4 packets by copy
+ * non-segmented mbuf.
+ * This function is mainly used to adapt TX MBUF_FAST_FREE offload.
+ * MBUF_FAST_FREE: Device supports optimization for fast release of mbufs.
+ * When set application must guarantee that per-queue all mbufs comes from
+ * the same mempool,has refcnt = 1,direct and non-segmented.
+ *
+ * @param pkt_in
+ * The input packet.
+ * @param pkts_out
+ * Array storing the output fragments.
+ * @param nb_pkts_out
+ * Number of fragments.
+ * @param mtu_size
+ * Size in bytes of the Maximum Transfer Unit (MTU) for the outgoing IPv4
+ * datagrams. This value includes the size of the IPv4 header.
+ * @param pool_direct
+ * MBUF pool used for allocating direct buffers for the output fragments.
+ * @return
+ * Upon successful completion - number of output fragments placed
+ * in the pkts_out array.
+ * Otherwise - (-1) * errno.
+ */
+int32_t
+rte_ipv4_fragment_copy_nonseg_packet(struct rte_mbuf *pkt_in,
+ struct rte_mbuf **pkts_out,
+ uint16_t nb_pkts_out,
+ uint16_t mtu_size,
+ struct rte_mempool *pool_direct)
+{
+ struct rte_mbuf *in_seg = NULL;
+ struct rte_ipv4_hdr *in_hdr;
+ uint32_t out_pkt_pos, in_seg_data_pos;
+ uint32_t more_in_segs;
+ uint16_t fragment_offset, flag_offset, frag_size, header_len;
+ uint16_t frag_bytes_remaining;
+ uint8_t ipopt_frag_hdr[IPV4_HDR_MAX_LEN];
+ uint16_t ipopt_len;
+
+ /*
+ * Formal parameter checking.
+ */
+ if (unlikely(pkt_in == NULL) || unlikely(pkts_out == NULL) ||
+ unlikely(nb_pkts_out == 0) || unlikely(pool_direct == NULL) ||
+ unlikely(mtu_size < RTE_ETHER_MIN_MTU))
+ return -EINVAL;
+
+ in_hdr = rte_pktmbuf_mtod(pkt_in, struct rte_ipv4_hdr *);
+ header_len = (in_hdr->version_ihl & RTE_IPV4_HDR_IHL_MASK) *
+ RTE_IPV4_IHL_MULTIPLIER;
+
+ /* Check IP header length */
+ if (unlikely(pkt_in->data_len < header_len) ||
+ unlikely(mtu_size < header_len))
+ return -EINVAL;
+
+ /*
+ * Ensure the IP payload length of all fragments is aligned to a
+ * multiple of 8 bytes as per RFC791 section 2.3.
+ */
+ frag_size = RTE_ALIGN_FLOOR((mtu_size - header_len),
+ IPV4_HDR_FO_ALIGN);
+
+ flag_offset = rte_cpu_to_be_16(in_hdr->fragment_offset);
+
+ /* If Don't Fragment flag is set */
+ if (unlikely((flag_offset & IPV4_HDR_DF_MASK) != 0))
+ return -ENOTSUP;
+
+ /* Check that pkts_out is big enough to hold all fragments */
+ if (unlikely(frag_size * nb_pkts_out <
+ (uint16_t)(pkt_in->pkt_len - header_len)))
+ return -EINVAL;
+
+ in_seg = pkt_in;
+ in_seg_data_pos = header_len;
+ out_pkt_pos = 0;
+ fragment_offset = 0;
+
+ ipopt_len = header_len - sizeof(struct rte_ipv4_hdr);
+ if (unlikely(ipopt_len > RTE_IPV4_HDR_OPT_MAX_LEN))
+ return -EINVAL;
+
+ more_in_segs = 1;
+ while (likely(more_in_segs)) {
+ struct rte_mbuf *out_pkt = NULL;
+ uint32_t more_out_segs;
+ struct rte_ipv4_hdr *out_hdr;
+
+ /* Allocate direct buffer */
+ out_pkt = rte_pktmbuf_alloc(pool_direct);
+ if (unlikely(out_pkt == NULL)) {
+ __free_fragments(pkts_out, out_pkt_pos);
+ return -ENOMEM;
+ }
+ if (unlikely(out_pkt->buf_len - rte_pktmbuf_headroom(out_pkt) <
+ frag_size)) {
+ rte_pktmbuf_free(out_pkt);
+ __free_fragments(pkts_out, out_pkt_pos);
+ return -EINVAL;
+ }
+
+ /* Reserve space for the IP header that will be built later */
+ out_pkt->data_len = header_len;
+ out_pkt->pkt_len = header_len;
+ frag_bytes_remaining = frag_size;
+
+ more_out_segs = 1;
+ while (likely(more_out_segs && more_in_segs)) {
+ uint32_t len;
+
+ len = frag_bytes_remaining;
+ if (len > (in_seg->data_len - in_seg_data_pos))
+ len = in_seg->data_len - in_seg_data_pos;
+
+ memcpy(rte_pktmbuf_mtod_offset(out_pkt, char *,
+ out_pkt->data_len),
+ rte_pktmbuf_mtod_offset(in_seg, char *,
+ in_seg_data_pos),
+ len);
+
+ in_seg_data_pos += len;
+ frag_bytes_remaining -= len;
+ out_pkt->data_len += len;
+
+ /* Current output packet (i.e. fragment) done ? */
+ if (unlikely(frag_bytes_remaining == 0))
+ more_out_segs = 0;
+
+ /* Current input segment done ? */
+ if (unlikely(in_seg_data_pos == in_seg->data_len)) {
+ in_seg = in_seg->next;
+ in_seg_data_pos = 0;
+
+ if (unlikely(in_seg == NULL))
+ more_in_segs = 0;
+ }
+ }
+
+ /* Build the IP header */
+
+ out_pkt->pkt_len = out_pkt->data_len;
+ out_hdr = rte_pktmbuf_mtod(out_pkt, struct rte_ipv4_hdr *);
+
+ __fill_ipv4hdr_frag(out_hdr, in_hdr, header_len,
+ (uint16_t)out_pkt->pkt_len,
+ flag_offset, fragment_offset, more_in_segs);
+
+ if (unlikely((fragment_offset == 0) && (ipopt_len) &&
+ ((flag_offset & RTE_IPV4_HDR_OFFSET_MASK) == 0))) {
+ ipopt_len = __create_ipopt_frag_hdr((uint8_t *)in_hdr,
+ ipopt_len, ipopt_frag_hdr);
+ fragment_offset = (uint16_t)(fragment_offset +
+ out_pkt->pkt_len - header_len);
+ out_pkt->l3_len = header_len;
+
+ header_len = sizeof(struct rte_ipv4_hdr) + ipopt_len;
+ in_hdr = (struct rte_ipv4_hdr *)ipopt_frag_hdr;
+ } else {
+ fragment_offset = (uint16_t)(fragment_offset +
+ out_pkt->pkt_len - header_len);
+ out_pkt->l3_len = header_len;
+ }
+
+ /* Write the fragment to the output list */
+ pkts_out[out_pkt_pos] = out_pkt;
+ out_pkt_pos++;
+ }
+
+ return out_pkt_pos;
+}
diff --git a/lib/ip_frag/version.map b/lib/ip_frag/version.map
index b9c1cca..8aad839 100644
--- a/lib/ip_frag/version.map
+++ b/lib/ip_frag/version.map
@@ -17,4 +17,5 @@ EXPERIMENTAL {
global:
rte_ip_frag_table_del_expired_entries;
+ rte_ipv4_fragment_copy_nonseg_packet;
};
--
1.8.3.1
next prev parent reply other threads:[~2022-07-24 8:10 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-09 2:39 [PATCH v1] " Huichao Cai
2022-06-09 14:19 ` [PATCH v2] " Huichao Cai
2022-07-10 23:35 ` Konstantin Ananyev
2022-07-11 9:14 ` Konstantin Ananyev
2022-07-15 8:05 ` Huichao Cai
2022-07-19 8:19 ` Konstantin Ananyev
2022-07-22 13:01 ` [PATCH v3] " Huichao Cai
2022-07-22 14:42 ` Morten Brørup
2022-07-22 14:49 ` Stephen Hemminger
2022-07-22 15:52 ` Morten Brørup
2022-07-22 15:58 ` Huichao Cai
2022-07-22 16:14 ` Morten Brørup
2022-07-22 22:35 ` Konstantin Ananyev
2022-07-23 8:24 ` Morten Brørup
2022-07-23 18:25 ` Konstantin Ananyev
2022-07-23 22:27 ` Morten Brørup
2022-07-22 14:49 ` [PATCH v4] " Huichao Cai
2022-07-24 4:50 ` [PATCH v5] " Huichao Cai
2022-07-24 8:10 ` Huichao Cai [this message]
2022-07-25 15:42 ` [PATCH v6] " Stephen Hemminger
2022-07-26 1:22 ` Huichao Cai
2022-08-07 11:49 ` Konstantin Ananyev
2022-08-07 11:45 ` Konstantin Ananyev
2022-08-08 1:48 ` [PATCH v7] " Huichao Cai
2022-08-08 22:29 ` Konstantin Ananyev
2022-08-29 14:22 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1658650203-7831-1-git-send-email-chcchc88@163.com \
--to=chcchc88@163.com \
--cc=dev@dpdk.org \
--cc=konstantin.v.ananyev@yandex.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).