DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH 0/4] doc: Updated testpmd UG due to latest changes in the app
@ 2014-11-15 19:13 Pablo de Lara
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 1/4] doc: Added new commands in testpmd UG Pablo de Lara
                   ` (4 more replies)
  0 siblings, 5 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-15 19:13 UTC (permalink / raw)
  To: dev

TestPMD app has been added new commands, which should be reflected
in the user guide. Also, this patchset fixes several typos and
changes the location of the description of some commands.

Pablo de Lara (4):
  doc: Added new commands in testpmd UG
  doc: Corrected info for tx_checksum set mask function, in testpmd UG
  doc: Moved commands in testpmd UG to match testpmd command help order
  doc: Various document fixes in testpmd UG

 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1066 ++++++++++++++-------------
 1 files changed, 564 insertions(+), 502 deletions(-)

-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH 1/4] doc: Added new commands in testpmd UG
  2014-11-15 19:13 [dpdk-dev] [PATCH 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
@ 2014-11-15 19:13 ` Pablo de Lara
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-15 19:13 UTC (permalink / raw)
  To: dev

Added info in testpmd functions section for the following commands:

- tunnel_filter add
- tunnel_filter rm
- rx_vxlan_port add
- rx_vxlan_port rm
- port stop/start queue
- set port mac address filter (for VF)

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   47 +++++++++++++++++++++++++++
 1 files changed, 47 insertions(+), 0 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c0d0033..a2b76d7 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -456,6 +456,36 @@ Set the outer VLAN TPID for packet filtering on a port:
 
 rx_vlan set tpid (value) (port_id)
 
+tunnel_filter add
+~~~~~~~~~~~~~~~~
+
+Add a tunnel filter on a port:
+
+tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+tunnel_filter remove
+~~~~~~~~~~~~~~~~~~~
+
+Remove a tunnel filter on a port:
+
+tunnel_filter rm (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+rx_vxlan_port add
+~~~~~~~~~~~~~~~~
+
+Add an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port add (udp_port) (port_id)
+
+rx_vxlan_port remove
+~~~~~~~~~~~~~~~~~~~
+
+Remove an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port rm (udp_port) (port_id)
+
 tx_vlan set
 ~~~~~~~~~~~
 
@@ -635,6 +665,14 @@ Set VF receive/transmit from a port:
 
 set port (port_id) vf (vf_id) (rx|tx) (on|off)
 
+set port - mac address filter (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add/Remove unicast or multicast MAC addr filter for a VF:
+
+set port (port_id) vf (vf_id) (mac_addr)
+ (exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) (on|off)
+
 set port - rx mode(for VF)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1061,6 +1099,15 @@ Close all ports or a specific port:
 
 port close (port_id|all)
 
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~
+
+Start/stop a rx/tx queue on a specific port:
+
+port (port_id) (rxq|txq) (queue_id) (start|stop)
+
+Only take effect when port is started.
+
 port config - speed
 ~~~~~~~~~~~~~~~~~~~
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-15 19:13 [dpdk-dev] [PATCH 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 1/4] doc: Added new commands in testpmd UG Pablo de Lara
@ 2014-11-15 19:13 ` Pablo de Lara
  2014-11-15 19:19   ` Jayakumar, Muthurajan
  2014-11-17 10:39   ` Olivier MATZ
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
                   ` (2 subsequent siblings)
  4 siblings, 2 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-15 19:13 UTC (permalink / raw)
  To: dev

tx_checksum set mask function now allows 4 extra bits in the mask
for TX checksum offload

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a2b76d7..3b62118 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -510,7 +510,7 @@ tx_vlan reset (port_id)
 tx_checksum set mask
 ~~~~~~~~~~~~~~~~~~~~
 
-Enable hardware insertion of checksum offload with a 4-bit mask, 0x0 - 0xF, in packets sent on a port:
+Enable hardware insertion of checksum offload with a 8-bit mask, 0x0 - 0xFF, in packets sent on a port:
 
 tx_checksum set (mask) (port_id)
 
@@ -524,6 +524,14 @@ bit 2 - if set insert tcp checksum offload
 
 bit 3 - if set insert sctp checksum offload
 
+bit 4 - if set insert inner ip checksum offload
+
+bit 5 - if set insert inner udp checksum offload
+
+bit 6 - if set insert inner tcp checksum offload
+
+bit 7 - if set insert inner sctp checksum offload
+
 .. note::
 
     Check the NIC Datasheet for hardware limits.
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH 3/4] doc: Moved commands in testpmd UG to match testpmd command help order
  2014-11-15 19:13 [dpdk-dev] [PATCH 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 1/4] doc: Added new commands in testpmd UG Pablo de Lara
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
@ 2014-11-15 19:13 ` Pablo de Lara
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
  2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
  4 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-15 19:13 UTC (permalink / raw)
  To: dev

Moved commands in testpmd UG to set queue rates
to match order in testpmd command help.

Created new section "Filters" to match that
same section in testpmd UG, and moved all
commands related to it there.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1019 ++++++++++++++-------------
 1 files changed, 512 insertions(+), 507 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 3b62118..2e64a3a 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -435,20 +435,6 @@ Remove a VLAN ID, from the set of VLAN identifiers filtered for VF(s) for port I
 
 rx_vlan rm (vlan_id) port (port_id) vf (vf_mask)
 
-tx_rate (for Queue)
-~~~~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queue of a port ID:
-
-set port (port_id) queue (queue_id) rate (rate_value)
-
-tx_rate (for VF)
-~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queues in VF of a port ID:
-
-set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
-
 rx_vlan set tpid
 ~~~~~~~~~~~~~~~~
 
@@ -698,6 +684,20 @@ The available receive modes are:
 
 *  MPE: accepts all multicast packets
 
+set port - tx_rate (for Queue)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queue of a port ID:
+
+set port (port_id) queue (queue_id) rate (rate_value)
+
+set port - tx_rate (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queues in VF of a port ID:
+
+set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
+
 set port - mirror rule
 ~~~~~~~~~~~~~~~~~~~~~~
 
@@ -764,884 +764,889 @@ Show the bypass configuration for a bypass enabled NIC using the lowest port on
 
 show bypass config (port_id)
 
-add_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+set link up
+~~~~~~~~~~~
 
-Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
+Set link up for a port.
 
-add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
+set link-up port (port id)
 
-The available information parameters are:
+set link down
+~~~~~~~~~~~~~
 
-*   port_id:  the port which the Ethertype filter assigned on.
+Set link down for a port.
 
-*   eth_value: the EtherType value want to match,
-    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
+set link-down port (port id)
 
-*   enable: user priority participates in the match.
+Port Functions
+--------------
 
-*   disable: user priority doesn't participate in the match.
+The following sections show functions for configuring ports.
 
-*   pri_value: user priority value that want to match.
+.. note::
 
-*   queue_id : The receive queue associated with this EtherType filter
+    Port configuration changes only become active when forwarding is started/restarted.
 
-*   index: the index of this EtherType filter
+port start
+~~~~~~~~~~
 
-Example:
+Start all ports or a specific port:
 
-.. code-block:: console
+port start (port_id|all)
 
-    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
-    Assign ARP packet to receive queue 3
+port stop
+~~~~~~~~~
 
-remove_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~~~~
+Stop all ports or a specific port:
 
-Remove a L2 Ethertype filter
+port stop (port_id|all)
 
-remove_ethertype_filter (port_id) index (idx)
+port close
+~~~~~~~~~~
 
-get_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+Close all ports or a specific port:
 
-Get and display a L2 Ethertype filter
+port close (port_id|all)
 
-get_ethertype_filter (port_id) index (idx)
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~
 
-Example:
+Start/stop a rx/tx queue on a specific port:
 
-.. code-block:: console
+port (port_id) (rxq|txq) (queue_id) (start|stop)
 
-    testpmd> get_ethertype_filter 0 index 0
+Only take effect when port is started.
 
-    filter[0]:
-        ethertype: 0x0806
-        priority: disable, 0
-        queue: 3
+port config - speed
+~~~~~~~~~~~~~~~~~~~
 
-add_2tuple_filter
-~~~~~~~~~~~~~~~~~
+Set the speed and duplex mode for all ports or a specific port:
 
-Add a 2-tuple filter,
-which identify packets by specific protocol and destination TCP/UDP port
-and forwards packets into one of the receive queues.
+port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
 
-add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
-flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
+port config - queues/descriptors
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The available information parameters are:
+Set number of queues/descriptors for rxq, txq, rxd and txd:
 
-*   port_id: the port which the 2-tuple filter assigned on.
+port config all (rxq|txq|rxd|txd) (value)
 
-*   pro_value: IP L4 protocol
+This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
 
-*   pro_mask: protocol participates in the match or not, 1 means participate
+port config - max-pkt-len
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   port_value: destination port in L4.
+Set the maximum packet length:
 
-*   port_mask: destination port participates in the match or not, 1 means participate.
+port config all max-pkt-len (value)
 
-*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
+This is equivalent to the --max-pkt-len command-line option.
 
-*   prio_value: the priority of this filter.
+port config - CRC Strip
+~~~~~~~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 2-tuple filter
+Set hardware CRC stripping on or off for all ports:
 
-*   index: the index of this 2-tuple filter
+port config all crc-strip (on|off)
 
-Example:
+CRC stripping is off by default.
 
-.. code-block:: console
+The on option is equivalent to the --crc-strip command-line option.
 
-    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
+port config - RX Checksum
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-remove_2tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+Set hardware RX checksum offload to on or off for all ports:
 
-Remove a 2-tuple filter
+port config all rx-cksum (on|off)
 
-remove_2tuple_filter (port_id) index (idx)
+Checksum offload is off by default.
 
-get_2tuple_filter
-~~~~~~~~~~~~~~~~~
+The on option is equivalent to the --enable-rx-cksum command-line option.
 
-Get and display a 2-tuple filter
+port config - VLAN
+~~~~~~~~~~~~~~~~~~
 
-get_2tuple_filter (port_id) index (idx)
+Set hardware VLAN on or off for all ports:
 
-Example:
+port config all hw-vlan (on|off)
 
-.. code-block:: console
+Hardware VLAN is on by default.
 
-    testpmd> get_2tuple_filter 0 index 0
+The off option is equivalent to the --disable-hw-vlan command-line option.
 
-    filter[0]:
-        Destination Port: 0x0020 mask: 1
-        protocol: 0x06 mask:1 tcp_flags: 0x02
-        priority: 3   queue: 3
+port config - Drop Packets
+~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-add_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set packet drop for packets with no descriptors on or off for all ports:
 
-Add a 5-tuple filter,
-which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
-and routes packets into one of the receive queues.
+port config all drop-en (on|off)
 
-add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
-protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
+Packet dropping for packets with no descriptors is off by default.
 
-The available information parameters are:
+The on option is equivalent to the --enable-drop-en command-line option.
 
-*   port_id: the port which the 5-tuple filter assigned on.
+port config - RSS
+~~~~~~~~~~~~~~~~~
 
-*   dst_address: destination IP address.
+Set the RSS (Receive Side Scaling) mode on or off:
 
-*   src_address: source IP address.
+port config all rss (ip|udp|none)
 
-*   dst_port_value: TCP/UDP destination port.
+RSS is on by default.
 
-*   src_port_value: TCP/UDP source port.
+The off option is equivalent to the --disable-rss command-line option.
 
-*   protocol_value: L4 protocol.
+port config - RSS Reta
+~~~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: participates in the match or not by bit for field above, 1b means participate
+Set the RSS (Receive Side Scaling) redirection table:
 
-*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
+port config all rss reta (hash,queue)[,(hash,queue)]
 
-*   prio_value: the priority of this filter.
+port config - DCB
+~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 5-tuple filter.
+Set the DCB mode for an individual port:
 
-*   index: the index of this 5-tuple filter
+port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
 
-Example:
+The traffic class should be 4 or 8.
 
-.. code-block:: console
+port config - Burst
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
+Set the number of packets per burst:
 
-remove_5tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+port config all burst (value)
 
-Remove a 5-tuple filter
+This is equivalent to the --burst command-line option.
 
-remove_5tuple_filter (port_id) index (idx)
+port config - Threshold
+~~~~~~~~~~~~~~~~~~~~~~~
 
-get_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set thresholds for TX/RX queues:
 
-Get and display a 5-tuple filter
+port config all (threshold) (value)
 
-get_5tuple_filter (port_id) index (idx)
+Where the threshold type can be:
 
-Example:
+*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
 
-.. code-block:: console
+*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
 
-    testpmd> get_5tuple_filter 1 index 0
+*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
 
-    filter[0]:
-        Destination IP: 0x02020205 mask: 1
-        Source IP: 0x02020204 mask: 1
-        Destination Port: 0x0040 mask: 1
-        Source Port: 0x0020 mask: 1
-        protocol: 0x06 mask: 1
-        priority: 3 flags: 0x00 queue: 3
+*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter
-~~~~~~~~~~~~~~
+*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
 
-Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
+*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter (port_id) priority (high|low) queue (queue_id)
+*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
 
-The available information parameters are:
+*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
 
-*   port_id: the port which the SYN filter assigned on.
+*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
+    These threshold options are also available from the command-line.
 
-*   high: this SYN filter has higher priority than other filters.
+Flow Director Functions
+-----------------------
 
-*   low: this SYN filter has lower priority than other filters.
+The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
 
-*   queue_id: The receive queue associated with this SYN filter
+Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
 
-Example:
+*   Perfect match filters.
+    The hardware checks a match between the masked fields of the received packets and the programmed filters.
 
-.. code-block:: console
+*   Signature filters.
+    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
 
-    testpmd> add_syn_filter 0 priority high queue 3,
+The Flow Director filters can match the following fields in a packet:
 
-remove_syn_filter
-~~~~~~~~~~~~~~~~~
+*   Source IP and destination IP addresses.
 
-Remove SYN filter
+*   Source port and destination port numbers (for UDP and TCP packets).
 
-remove_syn_filter (port_id)
+*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
 
-get_syn_filter
-~~~~~~~~~~~~~~
+*   VLAN header.
 
-Get and display SYN filter
+*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
 
-get_syn_filter (port_id)
+The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
+or parts of the fields.
+For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
 
-Example:
+In the following sections, several common parameters are used in the Flow Director filters.
+These are explained below:
 
-.. code-block:: console
+*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
 
-    testpmd> get_syn_filter 0
+    src 192.168.0.1 1024
 
-    syn filter: on, priority: high, queue: 3
+    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
 
-add_flex_filter
-~~~~~~~~~~~~~~~
+*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
 
-Add a Flex filter,
-which recognizes any arbitrary pattern within the first 128 bytes of the packet
-and routes packets into one of the receive queues.
+*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
 
-add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
-priority (prio_value) queue (queue_id) index (idx)
+The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
+and is counted from the first byte of the destination Ethernet MAC address.
+The default offset is 0xC bytes, which is the "Type" word in the MAC header.
+Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
+These values change when a VLAN tag is added.
 
-The available information parameters are:
+*   vlan: The VLAN header to match in the packet.
 
-*   port_id: the port which the Flex filter assigned on.
+*   queue: The index of the RX queue to route matched packets to.
 
-*   len_value: filter length in byte, no greater than 128.
+*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
 
-*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
+add_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
+Add a signature filter:
 
-*   prio_value: the priority of this filter.
+# Command is displayed on several lines for clarity.
 
-*   queue_id: The receive queue associated with this Flex filter.
+add_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-*   index: the index of this Flex filter
+    src (src_ip_address) (src_port)
 
-Example:
+    dst (dst_ip_address) (dst_port)
 
-.. code-block:: console
+    flexbytes (flexbytes_values)
 
-   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
+    vlan (vlan_id) queue (queue_id)
 
-Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
+upd_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-remove_flex_filter
-~~~~~~~~~~~~~~~~~~
+Update a signature filter:
 
-Remove a Flex filter
+# Command is displayed on several lines for clarity.
 
-remove_flex_filter (port_id) index (idx)
+upd_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-get_flex_filter
-~~~~~~~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Get and display a Flex filter
+    dst (dst_ip_address) (dst_port)
 
-get_flex_filter (port_id) index (idx)
+    flexbytes (flexbytes_values)
 
-Example:
+    vlan (vlan_id) queue (queue_id)
 
-.. code-block:: console
+rm_signature_filter
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> get_flex_filter 0 index 0
+Remove a signature filter:
 
-    filter[0]:
+# Command is displayed on several lines for clarity.
 
-        length: 16
+rm_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    src (src_ip_address) (src_port)
 
-        mask[]:
-    0b0000000000001100000000000000000000000000000000000000000000000000000000
-    0000000000000000000000000000000000000000000000000000000000
+    dst (dst_ip_address) (dst_port)
 
-        priority: 3   queue: 3
+    flexbytes (flexbytes_values)
 
-set link up
-~~~~~~~~~~~
+    vlan (vlan_id)
 
-Set link up for a port.
+add_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-set link-up port (port id)
+Add a perfect filter:
 
-set link down
-~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set link down for a port.
+add_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-set link-down port (port id)
+    src (src_ip_address) (src_port)
 
-Port Functions
---------------
+    dst (dst_ip_address) (dst_port)
 
-The following sections show functions for configuring ports.
+    flexbytes (flexbytes_values)
 
-.. note::
+    vlan (vlan_id) queue (queue_id) soft (soft_id)
 
-    Port configuration changes only become active when forwarding is started/restarted.
+upd_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-port start
-~~~~~~~~~~
+Update a perfect filter:
 
-Start all ports or a specific port:
+# Command is displayed on several lines for clarity.
 
-port start (port_id|all)
+upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-port stop
-~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Stop all ports or a specific port:
+    dst (dst_ip_address) (dst_port)
 
-port stop (port_id|all)
+    flexbytes (flexbytes_values)
 
-port close
-~~~~~~~~~~
+    vlan (vlan_id) queue (queue_id)
 
-Close all ports or a specific port:
+rm_perfect_filter
+~~~~~~~~~~~~~~~~~
 
-port close (port_id|all)
+Remove a perfect filter:
 
-port start/stop queue
-~~~~~~~~~~~~~~~~~~~~
+rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-Start/stop a rx/tx queue on a specific port:
+    src (src_ip_address) (src_port)
 
-port (port_id) (rxq|txq) (queue_id) (start|stop)
+    dst (dst_ip_address) (dst_port)
 
-Only take effect when port is started.
+    flexbytes (flexbytes_values)
 
-port config - speed
-~~~~~~~~~~~~~~~~~~~
+    vlan (vlan_id) soft (soft_id)
 
-Set the speed and duplex mode for all ports or a specific port:
+set_masks_filter
+~~~~~~~~~~~~~~~~
 
-port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
+Set IPv4 filter masks:
 
-port config - queues/descriptors
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set number of queues/descriptors for rxq, txq, rxd and txd:
+set_masks_filter (port_id) only_ip_flow (0|1)
 
-port config all (rxq|txq|rxd|txd) (value)
+    src_mask (ip_src_mask) (src_port_mask)
 
-This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-port config - max-pkt-len
-~~~~~~~~~~~~~~~~~~~~~~~~~
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-Set the maximum packet length:
+set_ipv6_masks_filter
+~~~~~~~~~~~~~~~~~~~~~
 
-port config all max-pkt-len (value)
+Set IPv6 filter masks:
 
-This is equivalent to the --max-pkt-len command-line option.
+# Command is displayed on several lines for clarity.
 
-port config - CRC Strip
-~~~~~~~~~~~~~~~~~~~~~~~
+set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
 
-Set hardware CRC stripping on or off for all ports:
+    src_mask (ip_src_mask) (src_port_mask)
 
-port config all crc-strip (on|off)
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-CRC stripping is off by default.
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-The on option is equivalent to the --crc-strip command-line option.
+    compare_dst (0|1)
 
-port config - RX Checksum
-~~~~~~~~~~~~~~~~~~~~~~~~~
+Link Bonding Functions
+----------------------
 
-Set hardware RX checksum offload to on or off for all ports:
+The Link Bonding functions make it possible to dynamically create and
+manage link bonding devices from within testpmd interactive prompt.
 
-port config all rx-cksum (on|off)
+create bonded device
+~~~~~~~~~~~~~~~~~~~~
 
-Checksum offload is off by default.
+Create a new bonding device:
 
-The on option is equivalent to the --enable-rx-cksum command-line option.
+create bonded device (mode) (socket)
 
-port config - VLAN
-~~~~~~~~~~~~~~~~~~
+For example, to create a bonded device in mode 1 on socket 0.
 
-Set hardware VLAN on or off for all ports:
+.. code-block:: console
 
-port config all hw-vlan (on|off)
+    testpmd> create bonded 1 0
+    created new bonded device (port X)
 
-Hardware VLAN is on by default.
+add bonding slave
+~~~~~~~~~~~~~~~~~
 
-The off option is equivalent to the --disable-hw-vlan command-line option.
+Adds Ethernet device to a Link Bonding device:
 
-port config - Drop Packets
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+add bonding slave (slave id) (port id)
 
-Set packet drop for packets with no descriptors on or off for all ports:
+For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
 
-port config all drop-en (on|off)
+.. code-block:: console
 
-Packet dropping for packets with no descriptors is off by default.
+    testpmd> add bonding slave 6 10
 
-The on option is equivalent to the --enable-drop-en command-line option.
 
-port config - RSS
-~~~~~~~~~~~~~~~~~
+remove bonding slave
+~~~~~~~~~~~~~~~~~~~~
 
-Set the RSS (Receive Side Scaling) mode on or off:
+Removes an Ethernet slave device from a Link Bonding device:
 
-port config all rss (ip|udp|none)
+remove bonding slave (slave id) (port id)
 
-RSS is on by default.
+For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
 
-The off option is equivalent to the --disable-rss command-line option.
+.. code-block:: console
 
-port config - RSS Reta
-~~~~~~~~~~~~~~~~~~~~~~
+    testpmd> remove bonding slave 6 10
 
-Set the RSS (Receive Side Scaling) redirection table:
+set bonding mode
+~~~~~~~~~~~~~~~~
 
-port config all rss reta (hash,queue)[,(hash,queue)]
+Set the Link Bonding mode of a Link Bonding device:
 
-port config - DCB
-~~~~~~~~~~~~~~~~~
+set bonding mode (value) (port id)
 
-Set the DCB mode for an individual port:
+For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
 
-port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
+.. code-block:: console
 
-The traffic class should be 4 or 8.
+    testpmd> set bonding mode 3 10
 
-port config - Burst
+set bonding primary
 ~~~~~~~~~~~~~~~~~~~
 
-Set the number of packets per burst:
-
-port config all burst (value)
-
-This is equivalent to the --burst command-line option.
+Set an Ethernet slave device as the primary device on a Link Bonding device:
 
-port config - Threshold
-~~~~~~~~~~~~~~~~~~~~~~~
+set bonding primary (slave id) (port id)
 
-Set thresholds for TX/RX queues:
+For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
 
-port config all (threshold) (value)
+.. code-block:: console
 
-Where the threshold type can be:
+    testpmd> set bonding primary 6 10
 
-*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac
+~~~~~~~~~~~~~~~
 
-*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
+Set the MAC address of a Link Bonding device:
 
-*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac (port id) (mac)
 
-*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
+For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
 
-*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
+.. code-block:: console
 
-*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
+    testpmd> set bonding mac 10 00:00:00:00:00:01
 
-*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
+set bonding xmit_balance_policy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
+Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
 
-*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
-    These threshold options are also available from the command-line.
+set bonding xmit_balance_policy (port_id) (l2|l23|l34)
 
-Flow Director Functions
------------------------
+For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
 
-The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
+.. code-block:: console
 
-Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
+    testpmd> set bonding xmit_balance_policy 10 l34
 
-*   Perfect match filters.
-    The hardware checks a match between the masked fields of the received packets and the programmed filters.
+show bonding config
+~~~~~~~~~~~~~~~~~~~
 
-*   Signature filters.
-    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
+Show the current configuration of a Link Bonding device:
 
-The Flow Director filters can match the following fields in a packet:
+show bonding config (port id)
 
-*   Source IP and destination IP addresses.
+For example,
+to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
+in balance mode with a transmission policy of layer 2+3.
 
-*   Source port and destination port numbers (for UDP and TCP packets).
+.. code-block:: console
 
-*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
+    testpmd> show bonding config 9
+        Bonding mode: 2
+        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
+        Slaves (3): [1 3 4]
+        Active Slaves (3): [1 3 4]
+        Primary: [3]
 
-*   VLAN header.
+Register Functions
+------------------
 
-*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
+The Register functions can be used to read from and write to registers on the network card referenced by a port number.
+This is mainly useful for debugging purposes.
+Reference should be made to the appropriate datasheet for the network card for details on the register addresses
+and fields that can be accessed.
 
-The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
-or parts of the fields.
-For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
+read reg
+~~~~~~~~
 
-In the following sections, several common parameters are used in the Flow Director filters.
-These are explained below:
+Display the value of a port register:
 
-*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
+read reg (port_id) (address)
 
-    src 192.168.0.1 1024
+For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
 
-    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
+.. code-block:: console
 
-*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
+    testpmd> read reg 0 0xEE00
+    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
 
-*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
+read regfield
+~~~~~~~~~~~~~
 
-The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
-and is counted from the first byte of the destination Ethernet MAC address.
-The default offset is 0xC bytes, which is the "Type" word in the MAC header.
-Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
-These values change when a VLAN tag is added.
+Display a port register bit field:
 
-*   vlan: The VLAN header to match in the packet.
+read regfield (port_id) (address) (bit_x) (bit_y)
 
-*   queue: The index of the RX queue to route matched packets to.
+For example, reading the lowest two bits from the register in the example above:
 
-*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
+.. code-block:: console
 
-add_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+    testpmd> read regfield 0 0xEE00 0 1
+    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
 
-Add a signature filter:
+read regbit
+~~~~~~~~~~~
 
-# Command is displayed on several lines for clarity.
+Display a single port register bit:
 
-add_signature_filter (port_id) (ip|udp|tcp|sctp)
+read regbit (port_id) (address) (bit_x)
 
-    src (src_ip_address) (src_port)
+For example, reading the lowest bit from the register in the example above:
 
-    dst (dst_ip_address) (dst_port)
+.. code-block:: console
 
-    flexbytes (flexbytes_values)
+    testpmd> read regbit 0 0xEE00 0
+    port 0 PCI register at offset 0xEE00: bit 0=1
 
-    vlan (vlan_id) queue (queue_id)
+write reg
+~~~~~~~~~
 
-upd_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+Set the value of a port register:
 
-Update a signature filter:
+write reg (port_id) (address) (value)
 
-# Command is displayed on several lines for clarity.
+For example, to clear a register:
 
-upd_signature_filter (port_id) (ip|udp|tcp|sctp)
+.. code-block:: console
 
-    src (src_ip_address) (src_port)
+    testpmd> write reg 0 0xEE00 0x0
+    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
 
-    dst (dst_ip_address) (dst_port)
+write regfield
+~~~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Set bit field of a port register:
 
-    vlan (vlan_id) queue (queue_id)
+write regfield (port_id) (address) (bit_x) (bit_y) (value)
 
-rm_signature_filter
-~~~~~~~~~~~~~~~~~~~
+For example, writing to the register cleared in the example above:
 
-Remove a signature filter:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> write regfield 0 0xEE00 0 1 2
+    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
 
-rm_signature_filter (port_id) (ip|udp|tcp|sctp)
+write regbit
+~~~~~~~~~~~~
 
-    src (src_ip_address) (src_port)
+Set single bit value of a port register:
 
-    dst (dst_ip_address) (dst_port)
+write regbit (port_id) (address) (bit_x) (value)
 
-    flexbytes (flexbytes_values)
+For example, to set the high bit in the register from the example above:
 
-    vlan (vlan_id)
+.. code-block:: console
 
-add_perfect_filter
-~~~~~~~~~~~~~~~~~~
+    testpmd> write regbit 0 0xEE00 31 1
+    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
 
-Add a perfect filter:
+Filter Functions
+-----------------------
 
-# Command is displayed on several lines for clarity.
+This section details the available filter functions that are available.
 
-add_perfect_filter (port_id) (ip|udp|tcp|sctp)
+add_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-    src (src_ip_address) (src_port)
+Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
 
-    dst (dst_ip_address) (dst_port)
+add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
 
-    flexbytes (flexbytes_values)
+The available information parameters are:
 
-    vlan (vlan_id) queue (queue_id) soft (soft_id)
+*   port_id:  the port which the Ethertype filter assigned on.
 
-upd_perfect_filter
-~~~~~~~~~~~~~~~~~~
+*   eth_value: the EtherType value want to match,
+    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
 
-Update a perfect filter:
+*   enable: user priority participates in the match.
 
-# Command is displayed on several lines for clarity.
+*   disable: user priority doesn't participate in the match.
 
-upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
+*   pri_value: user priority value that want to match.
 
-    src (src_ip_address) (src_port)
+*   queue_id : The receive queue associated with this EtherType filter
 
-    dst (dst_ip_address) (dst_port)
+*   index: the index of this EtherType filter
 
-    flexbytes (flexbytes_values)
+Example:
 
-    vlan (vlan_id) queue (queue_id)
+.. code-block:: console
 
-rm_perfect_filter
-~~~~~~~~~~~~~~~~~
+    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
+    Assign ARP packet to receive queue 3
 
-Remove a perfect filter:
+remove_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~~~~
 
-rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
+Remove a L2 Ethertype filter
 
-    src (src_ip_address) (src_port)
+remove_ethertype_filter (port_id) index (idx)
 
-    dst (dst_ip_address) (dst_port)
+get_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Get and display a L2 Ethertype filter
 
-    vlan (vlan_id) soft (soft_id)
+get_ethertype_filter (port_id) index (idx)
 
-set_masks_filter
-~~~~~~~~~~~~~~~~
+Example:
 
-Set IPv4 filter masks:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> get_ethertype_filter 0 index 0
 
-set_masks_filter (port_id) only_ip_flow (0|1)
+    filter[0]:
+        ethertype: 0x0806
+        priority: disable, 0
+        queue: 3
 
-    src_mask (ip_src_mask) (src_port_mask)
+add_2tuple_filter
+~~~~~~~~~~~~~~~~~
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+Add a 2-tuple filter,
+which identify packets by specific protocol and destination TCP/UDP port
+and forwards packets into one of the receive queues.
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
+flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
 
-set_ipv6_masks_filter
-~~~~~~~~~~~~~~~~~~~~~
+The available information parameters are:
 
-Set IPv6 filter masks:
+*   port_id: the port which the 2-tuple filter assigned on.
 
-# Command is displayed on several lines for clarity.
+*   pro_value: IP L4 protocol
 
-set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
+*   pro_mask: protocol participates in the match or not, 1 means participate
 
-    src_mask (ip_src_mask) (src_port_mask)
+*   port_value: destination port in L4.
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+*   port_mask: destination port participates in the match or not, 1 means participate.
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
 
-    compare_dst (0|1)
+*   prio_value: the priority of this filter.
 
-Link Bonding Functions
-----------------------
+*   queue_id: The receive queue associated with this 2-tuple filter
 
-The Link Bonding functions make it possible to dynamically create and
-manage link bonding devices from within testpmd interactive prompt.
+*   index: the index of this 2-tuple filter
 
-create bonded device
-~~~~~~~~~~~~~~~~~~~~
+Example:
 
-Create a new bonding device:
+.. code-block:: console
 
-create bonded device (mode) (socket)
+    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
 
-For example, to create a bonded device in mode 1 on socket 0.
+remove_2tuple_filter
+~~~~~~~~~~~~~~~~~~~~
 
-.. code-block:: console
+Remove a 2-tuple filter
 
-    testpmd> create bonded 1 0
-    created new bonded device (port X)
+remove_2tuple_filter (port_id) index (idx)
 
-add bonding slave
+get_2tuple_filter
 ~~~~~~~~~~~~~~~~~
 
-Adds Ethernet device to a Link Bonding device:
+Get and display a 2-tuple filter
 
-add bonding slave (slave id) (port id)
+get_2tuple_filter (port_id) index (idx)
 
-For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
+Example:
 
 .. code-block:: console
 
-    testpmd> add bonding slave 6 10
+    testpmd> get_2tuple_filter 0 index 0
 
+    filter[0]:
+        Destination Port: 0x0020 mask: 1
+        protocol: 0x06 mask:1 tcp_flags: 0x02
+        priority: 3   queue: 3
 
-remove bonding slave
-~~~~~~~~~~~~~~~~~~~~
+add_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-Removes an Ethernet slave device from a Link Bonding device:
+Add a 5-tuple filter,
+which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
+and routes packets into one of the receive queues.
 
-remove bonding slave (slave id) (port id)
+add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
+protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
 
-For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
+The available information parameters are:
 
-.. code-block:: console
+*   port_id: the port which the 5-tuple filter assigned on.
 
-    testpmd> remove bonding slave 6 10
+*   dst_address: destination IP address.
 
-set bonding mode
-~~~~~~~~~~~~~~~~
+*   src_address: source IP address.
 
-Set the Link Bonding mode of a Link Bonding device:
+*   dst_port_value: TCP/UDP destination port.
 
-set bonding mode (value) (port id)
+*   src_port_value: TCP/UDP source port.
 
-For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
+*   protocol_value: L4 protocol.
 
-.. code-block:: console
+*   mask_value: participates in the match or not by bit for field above, 1b means participate
 
-    testpmd> set bonding mode 3 10
+*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
 
-set bonding primary
-~~~~~~~~~~~~~~~~~~~
+*   prio_value: the priority of this filter.
 
-Set an Ethernet slave device as the primary device on a Link Bonding device:
+*   queue_id: The receive queue associated with this 5-tuple filter.
 
-set bonding primary (slave id) (port id)
+*   index: the index of this 5-tuple filter
 
-For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
+Example:
 
 .. code-block:: console
 
-    testpmd> set bonding primary 6 10
+    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
 
-set bonding mac
-~~~~~~~~~~~~~~~
+remove_5tuple_filter
+~~~~~~~~~~~~~~~~~~~~
 
-Set the MAC address of a Link Bonding device:
+Remove a 5-tuple filter
 
-set bonding mac (port id) (mac)
+remove_5tuple_filter (port_id) index (idx)
 
-For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
+get_5tuple_filter
+~~~~~~~~~~~~~~~~~
+
+Get and display a 5-tuple filter
+
+get_5tuple_filter (port_id) index (idx)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> set bonding mac 10 00:00:00:00:00:01
+    testpmd> get_5tuple_filter 1 index 0
 
-set bonding xmit_balance_policy
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+    filter[0]:
+        Destination IP: 0x02020205 mask: 1
+        Source IP: 0x02020204 mask: 1
+        Destination Port: 0x0040 mask: 1
+        Source Port: 0x0020 mask: 1
+        protocol: 0x06 mask: 1
+        priority: 3 flags: 0x00 queue: 3
 
-Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
+add_syn_filter
+~~~~~~~~~~~~~~
 
-set bonding xmit_balance_policy (port_id) (l2|l23|l34)
+Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
 
-For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
+add_syn_filter (port_id) priority (high|low) queue (queue_id)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> set bonding xmit_balance_policy 10 l34
+*   port_id: the port which the SYN filter assigned on.
 
-show bonding config
-~~~~~~~~~~~~~~~~~~~
+*   high: this SYN filter has higher priority than other filters.
 
-Show the current configuration of a Link Bonding device:
+*   low: this SYN filter has lower priority than other filters.
 
-show bonding config (port id)
+*   queue_id: The receive queue associated with this SYN filter
 
-For example,
-to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
-in balance mode with a transmission policy of layer 2+3.
+Example:
 
 .. code-block:: console
 
-    testpmd> show bonding config 9
-        Bonding mode: 2
-        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
-        Slaves (3): [1 3 4]
-        Active Slaves (3): [1 3 4]
-        Primary: [3]
+    testpmd> add_syn_filter 0 priority high queue 3,
 
-Register Functions
-------------------
+remove_syn_filter
+~~~~~~~~~~~~~~~~~
 
-The Register functions can be used to read from and write to registers on the network card referenced by a port number.
-This is mainly useful for debugging purposes.
-Reference should be made to the appropriate datasheet for the network card for details on the register addresses
-and fields that can be accessed.
+Remove SYN filter
 
-read reg
-~~~~~~~~
+remove_syn_filter (port_id)
 
-Display the value of a port register:
+get_syn_filter
+~~~~~~~~~~~~~~
 
-read reg (port_id) (address)
+Get and display SYN filter
 
-For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
+get_syn_filter (port_id)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> read reg 0 0xEE00
-    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
+    testpmd> get_syn_filter 0
 
-read regfield
-~~~~~~~~~~~~~
+    syn filter: on, priority: high, queue: 3
 
-Display a port register bit field:
+add_flex_filter
+~~~~~~~~~~~~~~~
 
-read regfield (port_id) (address) (bit_x) (bit_y)
+Add a Flex filter,
+which recognizes any arbitrary pattern within the first 128 bytes of the packet
+and routes packets into one of the receive queues.
 
-For example, reading the lowest two bits from the register in the example above:
+add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
+priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> read regfield 0 0xEE00 0 1
-    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
+*   port_id: the port which the Flex filter assigned on.
 
-read regbit
-~~~~~~~~~~~
+*   len_value: filter length in byte, no greater than 128.
 
-Display a single port register bit:
+*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
 
-read regbit (port_id) (address) (bit_x)
+*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
 
-For example, reading the lowest bit from the register in the example above:
+*   prio_value: the priority of this filter.
 
-.. code-block:: console
+*   queue_id: The receive queue associated with this Flex filter.
 
-    testpmd> read regbit 0 0xEE00 0
-    port 0 PCI register at offset 0xEE00: bit 0=1
+*   index: the index of this Flex filter
 
-write reg
-~~~~~~~~~
+Example:
 
-Set the value of a port register:
+.. code-block:: console
 
-write reg (port_id) (address) (value)
+   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
 
-For example, to clear a register:
+Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
 
-.. code-block:: console
+remove_flex_filter
+~~~~~~~~~~~~~~~~~~
 
-    testpmd> write reg 0 0xEE00 0x0
-    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
+Remove a Flex filter
 
-write regfield
-~~~~~~~~~~~~~~
+remove_flex_filter (port_id) index (idx)
 
-Set bit field of a port register:
+get_flex_filter
+~~~~~~~~~~~~~~~
 
-write regfield (port_id) (address) (bit_x) (bit_y) (value)
+Get and display a Flex filter
 
-For example, writing to the register cleared in the example above:
+get_flex_filter (port_id) index (idx)
 
-.. code-block:: console
+Example:
 
-    testpmd> write regfield 0 0xEE00 0 1 2
-    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
+.. code-block:: console
 
-write regbit
-~~~~~~~~~~~~
+    testpmd> get_flex_filter 0 index 0
 
-Set single bit value of a port register:
+    filter[0]:
 
-write regbit (port_id) (address) (bit_x) (value)
+        length: 16
 
-For example, to set the high bit in the register from the example above:
+        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000
 
-.. code-block:: console
+        mask[]:
+    0b0000000000001100000000000000000000000000000000000000000000000000000000
+    0000000000000000000000000000000000000000000000000000000000
 
-    testpmd> write regbit 0 0xEE00 31 1
-    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
+        priority: 3   queue: 3
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG
  2014-11-15 19:13 [dpdk-dev] [PATCH 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
                   ` (2 preceding siblings ...)
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
@ 2014-11-15 19:13 ` Pablo de Lara
  2014-12-03 13:17   ` Thomas Monjalon
  2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
  4 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-11-15 19:13 UTC (permalink / raw)
  To: dev

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 2e64a3a..7dd9c3a 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -103,7 +103,7 @@ stop
 quit
 ~~~~
 
-Quit to prompt in Linux or reboot on Baremetal:
+Quit to prompt in Linux/FreeBSD or reboot on Baremetal:
 
 quit
 
@@ -153,10 +153,12 @@ For example:
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
-Display the RSS hash functions and RSS hash key of port (port_id).
+Display the RSS hash functions and RSS hash key of a port:
 
-show port (port_id) rss-hash [key] clear port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+show port (port_id) rss-hash [key]
+
+clear port
+~~~~~~~~~~
 
 Clear the port statistics for a given port or for all ports:
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
@ 2014-11-15 19:19   ` Jayakumar, Muthurajan
  2014-11-17 10:39   ` Olivier MATZ
  1 sibling, 0 replies; 42+ messages in thread
From: Jayakumar, Muthurajan @ 2014-11-15 19:19 UTC (permalink / raw)
  To: De Lara Guarch, Pablo, dev

Thank you very much Pablo.

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
Sent: Saturday, November 15, 2014 11:13 AM
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG

tx_checksum set mask function now allows 4 extra bits in the mask for TX checksum offload

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a2b76d7..3b62118 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -510,7 +510,7 @@ tx_vlan reset (port_id)  tx_checksum set mask  ~~~~~~~~~~~~~~~~~~~~
 
-Enable hardware insertion of checksum offload with a 4-bit mask, 0x0 - 0xF, in packets sent on a port:
+Enable hardware insertion of checksum offload with a 8-bit mask, 0x0 - 0xFF, in packets sent on a port:
 
 tx_checksum set (mask) (port_id)
 
@@ -524,6 +524,14 @@ bit 2 - if set insert tcp checksum offload
 
 bit 3 - if set insert sctp checksum offload
 
+bit 4 - if set insert inner ip checksum offload
+
+bit 5 - if set insert inner udp checksum offload
+
+bit 6 - if set insert inner tcp checksum offload
+
+bit 7 - if set insert inner sctp checksum offload
+
 .. note::
 
     Check the NIC Datasheet for hardware limits.
--
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
  2014-11-15 19:19   ` Jayakumar, Muthurajan
@ 2014-11-17 10:39   ` Olivier MATZ
  2014-11-17 10:47     ` De Lara Guarch, Pablo
  1 sibling, 1 reply; 42+ messages in thread
From: Olivier MATZ @ 2014-11-17 10:39 UTC (permalink / raw)
  To: Pablo de Lara, dev

Hi Pablo,

On 11/15/2014 08:13 PM, Pablo de Lara wrote:
> tx_checksum set mask function now allows 4 extra bits in the mask
> for TX checksum offload
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
>  1 files changed, 9 insertions(+), 1 deletions(-)

A patch reworking the csumonly API is pending:
http://dpdk.org/ml/archives/dev/2014-November/008188.html

I don't know if it will be accepted, but just to mention that
these 2 patches will conflict in this case.

Regards,
Olivier

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-17 10:39   ` Olivier MATZ
@ 2014-11-17 10:47     ` De Lara Guarch, Pablo
  2014-11-26 12:41       ` Thomas Monjalon
  0 siblings, 1 reply; 42+ messages in thread
From: De Lara Guarch, Pablo @ 2014-11-17 10:47 UTC (permalink / raw)
  To: Olivier MATZ; +Cc: <dev

Hi Olivier,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Olivier MATZ
> Sent: Monday, November 17, 2014 10:39 AM
> To: De Lara Guarch, Pablo; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set
> mask function, in testpmd UG
> 
> Hi Pablo,
> 
> On 11/15/2014 08:13 PM, Pablo de Lara wrote:
> > tx_checksum set mask function now allows 4 extra bits in the mask
> > for TX checksum offload
> >
> > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> > ---
> >  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
> >  1 files changed, 9 insertions(+), 1 deletions(-)
> 
> A patch reworking the csumonly API is pending:
> http://dpdk.org/ml/archives/dev/2014-November/008188.html
> 
> I don't know if it will be accepted, but just to mention that
> these 2 patches will conflict in this case.

Thanks for spotting it! I guess that at this point, all we can do is wait.
If you patch gets applied before mine, I will send a v2 with the changes.
If it gets applied after, then I will send another patch to fix it.

Pablo
> 
> Regards,
> Olivier

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app
  2014-11-15 19:13 [dpdk-dev] [PATCH 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
                   ` (3 preceding siblings ...)
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
@ 2014-11-18 17:04 ` Pablo de Lara
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG Pablo de Lara
                     ` (4 more replies)
  4 siblings, 5 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-18 17:04 UTC (permalink / raw)
  To: dev

TestPMD app has been added new commands, which should be reflected
in the user guide. Also, this patchset fixes several typos and
changes the location of the description of some commands.

Changes in v2:

Title underline in added commands was too short.

Pablo de Lara (4):
  doc: Added new commands in testpmd UG
  doc: Corrected info for tx_checksum set mask function, in testpmd UG
  doc: Moved commands in testpmd UG to match testpmd command help order
  doc: Various document fixes in testpmd UG

 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1070 ++++++++++++++-------------
 1 files changed, 566 insertions(+), 504 deletions(-)

-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG
  2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
@ 2014-11-18 17:04   ` Pablo de Lara
  2014-11-19 13:40     ` Iremonger, Bernard
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
                     ` (3 subsequent siblings)
  4 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-11-18 17:04 UTC (permalink / raw)
  To: dev

Added info in testpmd functions section for the following commands:

- tunnel_filter add
- tunnel_filter rm
- rx_vxlan_port add
- rx_vxlan_port rm
- port stop/start queue
- set port mac address filter (for VF)

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   47 +++++++++++++++++++++++++++
 1 files changed, 47 insertions(+), 0 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c0d0033..8647227 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -456,6 +456,36 @@ Set the outer VLAN TPID for packet filtering on a port:
 
 rx_vlan set tpid (value) (port_id)
 
+tunnel_filter add
+~~~~~~~~~~~~~~~~~
+
+Add a tunnel filter on a port:
+
+tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+tunnel_filter remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove a tunnel filter on a port:
+
+tunnel_filter rm (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+rx_vxlan_port add
+~~~~~~~~~~~~~~~~~
+
+Add an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port add (udp_port) (port_id)
+
+rx_vxlan_port remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port rm (udp_port) (port_id)
+
 tx_vlan set
 ~~~~~~~~~~~
 
@@ -635,6 +665,14 @@ Set VF receive/transmit from a port:
 
 set port (port_id) vf (vf_id) (rx|tx) (on|off)
 
+set port - mac address filter (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add/Remove unicast or multicast MAC addr filter for a VF:
+
+set port (port_id) vf (vf_id) (mac_addr)
+ (exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) (on|off)
+
 set port - rx mode(for VF)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1061,6 +1099,15 @@ Close all ports or a specific port:
 
 port close (port_id|all)
 
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
+
+Start/stop a rx/tx queue on a specific port:
+
+port (port_id) (rxq|txq) (queue_id) (start|stop)
+
+Only take effect when port is started.
+
 port config - speed
 ~~~~~~~~~~~~~~~~~~~
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v2 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG Pablo de Lara
@ 2014-11-18 17:04   ` Pablo de Lara
  2014-11-19 13:42     ` Iremonger, Bernard
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
                     ` (2 subsequent siblings)
  4 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-11-18 17:04 UTC (permalink / raw)
  To: dev

tx_checksum set mask function now allows 4 extra bits in the mask
for TX checksum offload

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 8647227..cec99dc 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -510,7 +510,7 @@ tx_vlan reset (port_id)
 tx_checksum set mask
 ~~~~~~~~~~~~~~~~~~~~
 
-Enable hardware insertion of checksum offload with a 4-bit mask, 0x0 - 0xF, in packets sent on a port:
+Enable hardware insertion of checksum offload with a 8-bit mask, 0x0 - 0xFF, in packets sent on a port:
 
 tx_checksum set (mask) (port_id)
 
@@ -524,6 +524,14 @@ bit 2 - if set insert tcp checksum offload
 
 bit 3 - if set insert sctp checksum offload
 
+bit 4 - if set insert inner ip checksum offload
+
+bit 5 - if set insert inner udp checksum offload
+
+bit 6 - if set insert inner tcp checksum offload
+
+bit 7 - if set insert inner sctp checksum offload
+
 .. note::
 
     Check the NIC Datasheet for hardware limits.
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v2 3/4] doc: Moved commands in testpmd UG to match testpmd command help order
  2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG Pablo de Lara
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
@ 2014-11-18 17:04   ` Pablo de Lara
  2014-11-19 13:48     ` Iremonger, Bernard
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
  4 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-11-18 17:04 UTC (permalink / raw)
  To: dev

Moved commands in testpmd UG to set queue rates
to match order in testpmd command help.

Created new section "Filters" to match that
same section in testpmd UG, and moved all
commands related to it there.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1019 ++++++++++++++-------------
 1 files changed, 512 insertions(+), 507 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index cec99dc..8030f3b 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -435,20 +435,6 @@ Remove a VLAN ID, from the set of VLAN identifiers filtered for VF(s) for port I
 
 rx_vlan rm (vlan_id) port (port_id) vf (vf_mask)
 
-tx_rate (for Queue)
-~~~~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queue of a port ID:
-
-set port (port_id) queue (queue_id) rate (rate_value)
-
-tx_rate (for VF)
-~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queues in VF of a port ID:
-
-set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
-
 rx_vlan set tpid
 ~~~~~~~~~~~~~~~~
 
@@ -698,6 +684,20 @@ The available receive modes are:
 
 *  MPE: accepts all multicast packets
 
+set port - tx_rate (for Queue)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queue of a port ID:
+
+set port (port_id) queue (queue_id) rate (rate_value)
+
+set port - tx_rate (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queues in VF of a port ID:
+
+set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
+
 set port - mirror rule
 ~~~~~~~~~~~~~~~~~~~~~~
 
@@ -764,884 +764,889 @@ Show the bypass configuration for a bypass enabled NIC using the lowest port on
 
 show bypass config (port_id)
 
-add_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+set link up
+~~~~~~~~~~~
 
-Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
+Set link up for a port.
 
-add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
+set link-up port (port id)
 
-The available information parameters are:
+set link down
+~~~~~~~~~~~~~
 
-*   port_id:  the port which the Ethertype filter assigned on.
+Set link down for a port.
 
-*   eth_value: the EtherType value want to match,
-    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
+set link-down port (port id)
 
-*   enable: user priority participates in the match.
+Port Functions
+--------------
 
-*   disable: user priority doesn't participate in the match.
+The following sections show functions for configuring ports.
 
-*   pri_value: user priority value that want to match.
+.. note::
 
-*   queue_id : The receive queue associated with this EtherType filter
+    Port configuration changes only become active when forwarding is started/restarted.
 
-*   index: the index of this EtherType filter
+port start
+~~~~~~~~~~
 
-Example:
+Start all ports or a specific port:
 
-.. code-block:: console
+port start (port_id|all)
 
-    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
-    Assign ARP packet to receive queue 3
+port stop
+~~~~~~~~~
 
-remove_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~~~~
+Stop all ports or a specific port:
 
-Remove a L2 Ethertype filter
+port stop (port_id|all)
 
-remove_ethertype_filter (port_id) index (idx)
+port close
+~~~~~~~~~~
 
-get_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+Close all ports or a specific port:
 
-Get and display a L2 Ethertype filter
+port close (port_id|all)
 
-get_ethertype_filter (port_id) index (idx)
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
 
-Example:
+Start/stop a rx/tx queue on a specific port:
 
-.. code-block:: console
+port (port_id) (rxq|txq) (queue_id) (start|stop)
 
-    testpmd> get_ethertype_filter 0 index 0
+Only take effect when port is started.
 
-    filter[0]:
-        ethertype: 0x0806
-        priority: disable, 0
-        queue: 3
+port config - speed
+~~~~~~~~~~~~~~~~~~~
 
-add_2tuple_filter
-~~~~~~~~~~~~~~~~~
+Set the speed and duplex mode for all ports or a specific port:
 
-Add a 2-tuple filter,
-which identify packets by specific protocol and destination TCP/UDP port
-and forwards packets into one of the receive queues.
+port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
 
-add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
-flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
+port config - queues/descriptors
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The available information parameters are:
+Set number of queues/descriptors for rxq, txq, rxd and txd:
 
-*   port_id: the port which the 2-tuple filter assigned on.
+port config all (rxq|txq|rxd|txd) (value)
 
-*   pro_value: IP L4 protocol
+This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
 
-*   pro_mask: protocol participates in the match or not, 1 means participate
+port config - max-pkt-len
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   port_value: destination port in L4.
+Set the maximum packet length:
 
-*   port_mask: destination port participates in the match or not, 1 means participate.
+port config all max-pkt-len (value)
 
-*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
+This is equivalent to the --max-pkt-len command-line option.
 
-*   prio_value: the priority of this filter.
+port config - CRC Strip
+~~~~~~~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 2-tuple filter
+Set hardware CRC stripping on or off for all ports:
 
-*   index: the index of this 2-tuple filter
+port config all crc-strip (on|off)
 
-Example:
+CRC stripping is off by default.
 
-.. code-block:: console
+The on option is equivalent to the --crc-strip command-line option.
 
-    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
+port config - RX Checksum
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-remove_2tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+Set hardware RX checksum offload to on or off for all ports:
 
-Remove a 2-tuple filter
+port config all rx-cksum (on|off)
 
-remove_2tuple_filter (port_id) index (idx)
+Checksum offload is off by default.
 
-get_2tuple_filter
-~~~~~~~~~~~~~~~~~
+The on option is equivalent to the --enable-rx-cksum command-line option.
 
-Get and display a 2-tuple filter
+port config - VLAN
+~~~~~~~~~~~~~~~~~~
 
-get_2tuple_filter (port_id) index (idx)
+Set hardware VLAN on or off for all ports:
 
-Example:
+port config all hw-vlan (on|off)
 
-.. code-block:: console
+Hardware VLAN is on by default.
 
-    testpmd> get_2tuple_filter 0 index 0
+The off option is equivalent to the --disable-hw-vlan command-line option.
 
-    filter[0]:
-        Destination Port: 0x0020 mask: 1
-        protocol: 0x06 mask:1 tcp_flags: 0x02
-        priority: 3   queue: 3
+port config - Drop Packets
+~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-add_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set packet drop for packets with no descriptors on or off for all ports:
 
-Add a 5-tuple filter,
-which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
-and routes packets into one of the receive queues.
+port config all drop-en (on|off)
 
-add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
-protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
+Packet dropping for packets with no descriptors is off by default.
 
-The available information parameters are:
+The on option is equivalent to the --enable-drop-en command-line option.
 
-*   port_id: the port which the 5-tuple filter assigned on.
+port config - RSS
+~~~~~~~~~~~~~~~~~
 
-*   dst_address: destination IP address.
+Set the RSS (Receive Side Scaling) mode on or off:
 
-*   src_address: source IP address.
+port config all rss (ip|udp|none)
 
-*   dst_port_value: TCP/UDP destination port.
+RSS is on by default.
 
-*   src_port_value: TCP/UDP source port.
+The off option is equivalent to the --disable-rss command-line option.
 
-*   protocol_value: L4 protocol.
+port config - RSS Reta
+~~~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: participates in the match or not by bit for field above, 1b means participate
+Set the RSS (Receive Side Scaling) redirection table:
 
-*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
+port config all rss reta (hash,queue)[,(hash,queue)]
 
-*   prio_value: the priority of this filter.
+port config - DCB
+~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 5-tuple filter.
+Set the DCB mode for an individual port:
 
-*   index: the index of this 5-tuple filter
+port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
 
-Example:
+The traffic class should be 4 or 8.
 
-.. code-block:: console
+port config - Burst
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
+Set the number of packets per burst:
 
-remove_5tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+port config all burst (value)
 
-Remove a 5-tuple filter
+This is equivalent to the --burst command-line option.
 
-remove_5tuple_filter (port_id) index (idx)
+port config - Threshold
+~~~~~~~~~~~~~~~~~~~~~~~
 
-get_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set thresholds for TX/RX queues:
 
-Get and display a 5-tuple filter
+port config all (threshold) (value)
 
-get_5tuple_filter (port_id) index (idx)
+Where the threshold type can be:
 
-Example:
+*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
 
-.. code-block:: console
+*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
 
-    testpmd> get_5tuple_filter 1 index 0
+*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
 
-    filter[0]:
-        Destination IP: 0x02020205 mask: 1
-        Source IP: 0x02020204 mask: 1
-        Destination Port: 0x0040 mask: 1
-        Source Port: 0x0020 mask: 1
-        protocol: 0x06 mask: 1
-        priority: 3 flags: 0x00 queue: 3
+*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter
-~~~~~~~~~~~~~~
+*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
 
-Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
+*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter (port_id) priority (high|low) queue (queue_id)
+*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
 
-The available information parameters are:
+*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
 
-*   port_id: the port which the SYN filter assigned on.
+*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
+    These threshold options are also available from the command-line.
 
-*   high: this SYN filter has higher priority than other filters.
+Flow Director Functions
+-----------------------
 
-*   low: this SYN filter has lower priority than other filters.
+The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
 
-*   queue_id: The receive queue associated with this SYN filter
+Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
 
-Example:
+*   Perfect match filters.
+    The hardware checks a match between the masked fields of the received packets and the programmed filters.
 
-.. code-block:: console
+*   Signature filters.
+    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
 
-    testpmd> add_syn_filter 0 priority high queue 3,
+The Flow Director filters can match the following fields in a packet:
 
-remove_syn_filter
-~~~~~~~~~~~~~~~~~
+*   Source IP and destination IP addresses.
 
-Remove SYN filter
+*   Source port and destination port numbers (for UDP and TCP packets).
 
-remove_syn_filter (port_id)
+*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
 
-get_syn_filter
-~~~~~~~~~~~~~~
+*   VLAN header.
 
-Get and display SYN filter
+*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
 
-get_syn_filter (port_id)
+The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
+or parts of the fields.
+For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
 
-Example:
+In the following sections, several common parameters are used in the Flow Director filters.
+These are explained below:
 
-.. code-block:: console
+*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
 
-    testpmd> get_syn_filter 0
+    src 192.168.0.1 1024
 
-    syn filter: on, priority: high, queue: 3
+    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
 
-add_flex_filter
-~~~~~~~~~~~~~~~
+*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
 
-Add a Flex filter,
-which recognizes any arbitrary pattern within the first 128 bytes of the packet
-and routes packets into one of the receive queues.
+*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
 
-add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
-priority (prio_value) queue (queue_id) index (idx)
+The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
+and is counted from the first byte of the destination Ethernet MAC address.
+The default offset is 0xC bytes, which is the "Type" word in the MAC header.
+Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
+These values change when a VLAN tag is added.
 
-The available information parameters are:
+*   vlan: The VLAN header to match in the packet.
 
-*   port_id: the port which the Flex filter assigned on.
+*   queue: The index of the RX queue to route matched packets to.
 
-*   len_value: filter length in byte, no greater than 128.
+*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
 
-*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
+add_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
+Add a signature filter:
 
-*   prio_value: the priority of this filter.
+# Command is displayed on several lines for clarity.
 
-*   queue_id: The receive queue associated with this Flex filter.
+add_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-*   index: the index of this Flex filter
+    src (src_ip_address) (src_port)
 
-Example:
+    dst (dst_ip_address) (dst_port)
 
-.. code-block:: console
+    flexbytes (flexbytes_values)
 
-   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
+    vlan (vlan_id) queue (queue_id)
 
-Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
+upd_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-remove_flex_filter
-~~~~~~~~~~~~~~~~~~
+Update a signature filter:
 
-Remove a Flex filter
+# Command is displayed on several lines for clarity.
 
-remove_flex_filter (port_id) index (idx)
+upd_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-get_flex_filter
-~~~~~~~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Get and display a Flex filter
+    dst (dst_ip_address) (dst_port)
 
-get_flex_filter (port_id) index (idx)
+    flexbytes (flexbytes_values)
 
-Example:
+    vlan (vlan_id) queue (queue_id)
 
-.. code-block:: console
+rm_signature_filter
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> get_flex_filter 0 index 0
+Remove a signature filter:
 
-    filter[0]:
+# Command is displayed on several lines for clarity.
 
-        length: 16
+rm_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    src (src_ip_address) (src_port)
 
-        mask[]:
-    0b0000000000001100000000000000000000000000000000000000000000000000000000
-    0000000000000000000000000000000000000000000000000000000000
+    dst (dst_ip_address) (dst_port)
 
-        priority: 3   queue: 3
+    flexbytes (flexbytes_values)
 
-set link up
-~~~~~~~~~~~
+    vlan (vlan_id)
 
-Set link up for a port.
+add_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-set link-up port (port id)
+Add a perfect filter:
 
-set link down
-~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set link down for a port.
+add_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-set link-down port (port id)
+    src (src_ip_address) (src_port)
 
-Port Functions
---------------
+    dst (dst_ip_address) (dst_port)
 
-The following sections show functions for configuring ports.
+    flexbytes (flexbytes_values)
 
-.. note::
+    vlan (vlan_id) queue (queue_id) soft (soft_id)
 
-    Port configuration changes only become active when forwarding is started/restarted.
+upd_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-port start
-~~~~~~~~~~
+Update a perfect filter:
 
-Start all ports or a specific port:
+# Command is displayed on several lines for clarity.
 
-port start (port_id|all)
+upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-port stop
-~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Stop all ports or a specific port:
+    dst (dst_ip_address) (dst_port)
 
-port stop (port_id|all)
+    flexbytes (flexbytes_values)
 
-port close
-~~~~~~~~~~
+    vlan (vlan_id) queue (queue_id)
 
-Close all ports or a specific port:
+rm_perfect_filter
+~~~~~~~~~~~~~~~~~
 
-port close (port_id|all)
+Remove a perfect filter:
 
-port start/stop queue
-~~~~~~~~~~~~~~~~~~~~~
+rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-Start/stop a rx/tx queue on a specific port:
+    src (src_ip_address) (src_port)
 
-port (port_id) (rxq|txq) (queue_id) (start|stop)
+    dst (dst_ip_address) (dst_port)
 
-Only take effect when port is started.
+    flexbytes (flexbytes_values)
 
-port config - speed
-~~~~~~~~~~~~~~~~~~~
+    vlan (vlan_id) soft (soft_id)
 
-Set the speed and duplex mode for all ports or a specific port:
+set_masks_filter
+~~~~~~~~~~~~~~~~
 
-port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
+Set IPv4 filter masks:
 
-port config - queues/descriptors
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set number of queues/descriptors for rxq, txq, rxd and txd:
+set_masks_filter (port_id) only_ip_flow (0|1)
 
-port config all (rxq|txq|rxd|txd) (value)
+    src_mask (ip_src_mask) (src_port_mask)
 
-This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-port config - max-pkt-len
-~~~~~~~~~~~~~~~~~~~~~~~~~
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-Set the maximum packet length:
+set_ipv6_masks_filter
+~~~~~~~~~~~~~~~~~~~~~
 
-port config all max-pkt-len (value)
+Set IPv6 filter masks:
 
-This is equivalent to the --max-pkt-len command-line option.
+# Command is displayed on several lines for clarity.
 
-port config - CRC Strip
-~~~~~~~~~~~~~~~~~~~~~~~
+set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
 
-Set hardware CRC stripping on or off for all ports:
+    src_mask (ip_src_mask) (src_port_mask)
 
-port config all crc-strip (on|off)
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-CRC stripping is off by default.
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-The on option is equivalent to the --crc-strip command-line option.
+    compare_dst (0|1)
 
-port config - RX Checksum
-~~~~~~~~~~~~~~~~~~~~~~~~~
+Link Bonding Functions
+----------------------
 
-Set hardware RX checksum offload to on or off for all ports:
+The Link Bonding functions make it possible to dynamically create and
+manage link bonding devices from within testpmd interactive prompt.
 
-port config all rx-cksum (on|off)
+create bonded device
+~~~~~~~~~~~~~~~~~~~~
 
-Checksum offload is off by default.
+Create a new bonding device:
 
-The on option is equivalent to the --enable-rx-cksum command-line option.
+create bonded device (mode) (socket)
 
-port config - VLAN
-~~~~~~~~~~~~~~~~~~
+For example, to create a bonded device in mode 1 on socket 0.
 
-Set hardware VLAN on or off for all ports:
+.. code-block:: console
 
-port config all hw-vlan (on|off)
+    testpmd> create bonded 1 0
+    created new bonded device (port X)
 
-Hardware VLAN is on by default.
+add bonding slave
+~~~~~~~~~~~~~~~~~
 
-The off option is equivalent to the --disable-hw-vlan command-line option.
+Adds Ethernet device to a Link Bonding device:
 
-port config - Drop Packets
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+add bonding slave (slave id) (port id)
 
-Set packet drop for packets with no descriptors on or off for all ports:
+For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
 
-port config all drop-en (on|off)
+.. code-block:: console
 
-Packet dropping for packets with no descriptors is off by default.
+    testpmd> add bonding slave 6 10
 
-The on option is equivalent to the --enable-drop-en command-line option.
 
-port config - RSS
-~~~~~~~~~~~~~~~~~
+remove bonding slave
+~~~~~~~~~~~~~~~~~~~~
 
-Set the RSS (Receive Side Scaling) mode on or off:
+Removes an Ethernet slave device from a Link Bonding device:
 
-port config all rss (ip|udp|none)
+remove bonding slave (slave id) (port id)
 
-RSS is on by default.
+For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
 
-The off option is equivalent to the --disable-rss command-line option.
+.. code-block:: console
 
-port config - RSS Reta
-~~~~~~~~~~~~~~~~~~~~~~
+    testpmd> remove bonding slave 6 10
 
-Set the RSS (Receive Side Scaling) redirection table:
+set bonding mode
+~~~~~~~~~~~~~~~~
 
-port config all rss reta (hash,queue)[,(hash,queue)]
+Set the Link Bonding mode of a Link Bonding device:
 
-port config - DCB
-~~~~~~~~~~~~~~~~~
+set bonding mode (value) (port id)
 
-Set the DCB mode for an individual port:
+For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
 
-port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
+.. code-block:: console
 
-The traffic class should be 4 or 8.
+    testpmd> set bonding mode 3 10
 
-port config - Burst
+set bonding primary
 ~~~~~~~~~~~~~~~~~~~
 
-Set the number of packets per burst:
-
-port config all burst (value)
-
-This is equivalent to the --burst command-line option.
+Set an Ethernet slave device as the primary device on a Link Bonding device:
 
-port config - Threshold
-~~~~~~~~~~~~~~~~~~~~~~~
+set bonding primary (slave id) (port id)
 
-Set thresholds for TX/RX queues:
+For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
 
-port config all (threshold) (value)
+.. code-block:: console
 
-Where the threshold type can be:
+    testpmd> set bonding primary 6 10
 
-*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac
+~~~~~~~~~~~~~~~
 
-*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
+Set the MAC address of a Link Bonding device:
 
-*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac (port id) (mac)
 
-*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
+For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
 
-*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
+.. code-block:: console
 
-*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
+    testpmd> set bonding mac 10 00:00:00:00:00:01
 
-*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
+set bonding xmit_balance_policy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
+Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
 
-*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
-    These threshold options are also available from the command-line.
+set bonding xmit_balance_policy (port_id) (l2|l23|l34)
 
-Flow Director Functions
------------------------
+For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
 
-The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
+.. code-block:: console
 
-Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
+    testpmd> set bonding xmit_balance_policy 10 l34
 
-*   Perfect match filters.
-    The hardware checks a match between the masked fields of the received packets and the programmed filters.
+show bonding config
+~~~~~~~~~~~~~~~~~~~
 
-*   Signature filters.
-    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
+Show the current configuration of a Link Bonding device:
 
-The Flow Director filters can match the following fields in a packet:
+show bonding config (port id)
 
-*   Source IP and destination IP addresses.
+For example,
+to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
+in balance mode with a transmission policy of layer 2+3.
 
-*   Source port and destination port numbers (for UDP and TCP packets).
+.. code-block:: console
 
-*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
+    testpmd> show bonding config 9
+        Bonding mode: 2
+        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
+        Slaves (3): [1 3 4]
+        Active Slaves (3): [1 3 4]
+        Primary: [3]
 
-*   VLAN header.
+Register Functions
+------------------
 
-*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
+The Register functions can be used to read from and write to registers on the network card referenced by a port number.
+This is mainly useful for debugging purposes.
+Reference should be made to the appropriate datasheet for the network card for details on the register addresses
+and fields that can be accessed.
 
-The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
-or parts of the fields.
-For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
+read reg
+~~~~~~~~
 
-In the following sections, several common parameters are used in the Flow Director filters.
-These are explained below:
+Display the value of a port register:
 
-*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
+read reg (port_id) (address)
 
-    src 192.168.0.1 1024
+For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
 
-    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
+.. code-block:: console
 
-*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
+    testpmd> read reg 0 0xEE00
+    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
 
-*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
+read regfield
+~~~~~~~~~~~~~
 
-The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
-and is counted from the first byte of the destination Ethernet MAC address.
-The default offset is 0xC bytes, which is the "Type" word in the MAC header.
-Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
-These values change when a VLAN tag is added.
+Display a port register bit field:
 
-*   vlan: The VLAN header to match in the packet.
+read regfield (port_id) (address) (bit_x) (bit_y)
 
-*   queue: The index of the RX queue to route matched packets to.
+For example, reading the lowest two bits from the register in the example above:
 
-*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
+.. code-block:: console
 
-add_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+    testpmd> read regfield 0 0xEE00 0 1
+    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
 
-Add a signature filter:
+read regbit
+~~~~~~~~~~~
 
-# Command is displayed on several lines for clarity.
+Display a single port register bit:
 
-add_signature_filter (port_id) (ip|udp|tcp|sctp)
+read regbit (port_id) (address) (bit_x)
 
-    src (src_ip_address) (src_port)
+For example, reading the lowest bit from the register in the example above:
 
-    dst (dst_ip_address) (dst_port)
+.. code-block:: console
 
-    flexbytes (flexbytes_values)
+    testpmd> read regbit 0 0xEE00 0
+    port 0 PCI register at offset 0xEE00: bit 0=1
 
-    vlan (vlan_id) queue (queue_id)
+write reg
+~~~~~~~~~
 
-upd_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+Set the value of a port register:
 
-Update a signature filter:
+write reg (port_id) (address) (value)
 
-# Command is displayed on several lines for clarity.
+For example, to clear a register:
 
-upd_signature_filter (port_id) (ip|udp|tcp|sctp)
+.. code-block:: console
 
-    src (src_ip_address) (src_port)
+    testpmd> write reg 0 0xEE00 0x0
+    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
 
-    dst (dst_ip_address) (dst_port)
+write regfield
+~~~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Set bit field of a port register:
 
-    vlan (vlan_id) queue (queue_id)
+write regfield (port_id) (address) (bit_x) (bit_y) (value)
 
-rm_signature_filter
-~~~~~~~~~~~~~~~~~~~
+For example, writing to the register cleared in the example above:
 
-Remove a signature filter:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> write regfield 0 0xEE00 0 1 2
+    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
 
-rm_signature_filter (port_id) (ip|udp|tcp|sctp)
+write regbit
+~~~~~~~~~~~~
 
-    src (src_ip_address) (src_port)
+Set single bit value of a port register:
 
-    dst (dst_ip_address) (dst_port)
+write regbit (port_id) (address) (bit_x) (value)
 
-    flexbytes (flexbytes_values)
+For example, to set the high bit in the register from the example above:
 
-    vlan (vlan_id)
+.. code-block:: console
 
-add_perfect_filter
-~~~~~~~~~~~~~~~~~~
+    testpmd> write regbit 0 0xEE00 31 1
+    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
 
-Add a perfect filter:
+Filter Functions
+-----------------------
 
-# Command is displayed on several lines for clarity.
+This section details the available filter functions that are available.
 
-add_perfect_filter (port_id) (ip|udp|tcp|sctp)
+add_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-    src (src_ip_address) (src_port)
+Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
 
-    dst (dst_ip_address) (dst_port)
+add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
 
-    flexbytes (flexbytes_values)
+The available information parameters are:
 
-    vlan (vlan_id) queue (queue_id) soft (soft_id)
+*   port_id:  the port which the Ethertype filter assigned on.
 
-upd_perfect_filter
-~~~~~~~~~~~~~~~~~~
+*   eth_value: the EtherType value want to match,
+    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
 
-Update a perfect filter:
+*   enable: user priority participates in the match.
 
-# Command is displayed on several lines for clarity.
+*   disable: user priority doesn't participate in the match.
 
-upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
+*   pri_value: user priority value that want to match.
 
-    src (src_ip_address) (src_port)
+*   queue_id : The receive queue associated with this EtherType filter
 
-    dst (dst_ip_address) (dst_port)
+*   index: the index of this EtherType filter
 
-    flexbytes (flexbytes_values)
+Example:
 
-    vlan (vlan_id) queue (queue_id)
+.. code-block:: console
 
-rm_perfect_filter
-~~~~~~~~~~~~~~~~~
+    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
+    Assign ARP packet to receive queue 3
 
-Remove a perfect filter:
+remove_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~~~~
 
-rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
+Remove a L2 Ethertype filter
 
-    src (src_ip_address) (src_port)
+remove_ethertype_filter (port_id) index (idx)
 
-    dst (dst_ip_address) (dst_port)
+get_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Get and display a L2 Ethertype filter
 
-    vlan (vlan_id) soft (soft_id)
+get_ethertype_filter (port_id) index (idx)
 
-set_masks_filter
-~~~~~~~~~~~~~~~~
+Example:
 
-Set IPv4 filter masks:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> get_ethertype_filter 0 index 0
 
-set_masks_filter (port_id) only_ip_flow (0|1)
+    filter[0]:
+        ethertype: 0x0806
+        priority: disable, 0
+        queue: 3
 
-    src_mask (ip_src_mask) (src_port_mask)
+add_2tuple_filter
+~~~~~~~~~~~~~~~~~
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+Add a 2-tuple filter,
+which identify packets by specific protocol and destination TCP/UDP port
+and forwards packets into one of the receive queues.
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
+flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
 
-set_ipv6_masks_filter
-~~~~~~~~~~~~~~~~~~~~~
+The available information parameters are:
 
-Set IPv6 filter masks:
+*   port_id: the port which the 2-tuple filter assigned on.
 
-# Command is displayed on several lines for clarity.
+*   pro_value: IP L4 protocol
 
-set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
+*   pro_mask: protocol participates in the match or not, 1 means participate
 
-    src_mask (ip_src_mask) (src_port_mask)
+*   port_value: destination port in L4.
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+*   port_mask: destination port participates in the match or not, 1 means participate.
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
 
-    compare_dst (0|1)
+*   prio_value: the priority of this filter.
 
-Link Bonding Functions
-----------------------
+*   queue_id: The receive queue associated with this 2-tuple filter
 
-The Link Bonding functions make it possible to dynamically create and
-manage link bonding devices from within testpmd interactive prompt.
+*   index: the index of this 2-tuple filter
 
-create bonded device
-~~~~~~~~~~~~~~~~~~~~
+Example:
 
-Create a new bonding device:
+.. code-block:: console
 
-create bonded device (mode) (socket)
+    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
 
-For example, to create a bonded device in mode 1 on socket 0.
+remove_2tuple_filter
+~~~~~~~~~~~~~~~~~~~~
 
-.. code-block:: console
+Remove a 2-tuple filter
 
-    testpmd> create bonded 1 0
-    created new bonded device (port X)
+remove_2tuple_filter (port_id) index (idx)
 
-add bonding slave
+get_2tuple_filter
 ~~~~~~~~~~~~~~~~~
 
-Adds Ethernet device to a Link Bonding device:
+Get and display a 2-tuple filter
 
-add bonding slave (slave id) (port id)
+get_2tuple_filter (port_id) index (idx)
 
-For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
+Example:
 
 .. code-block:: console
 
-    testpmd> add bonding slave 6 10
+    testpmd> get_2tuple_filter 0 index 0
 
+    filter[0]:
+        Destination Port: 0x0020 mask: 1
+        protocol: 0x06 mask:1 tcp_flags: 0x02
+        priority: 3   queue: 3
 
-remove bonding slave
-~~~~~~~~~~~~~~~~~~~~
+add_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-Removes an Ethernet slave device from a Link Bonding device:
+Add a 5-tuple filter,
+which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
+and routes packets into one of the receive queues.
 
-remove bonding slave (slave id) (port id)
+add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
+protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
 
-For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
+The available information parameters are:
 
-.. code-block:: console
+*   port_id: the port which the 5-tuple filter assigned on.
 
-    testpmd> remove bonding slave 6 10
+*   dst_address: destination IP address.
 
-set bonding mode
-~~~~~~~~~~~~~~~~
+*   src_address: source IP address.
 
-Set the Link Bonding mode of a Link Bonding device:
+*   dst_port_value: TCP/UDP destination port.
 
-set bonding mode (value) (port id)
+*   src_port_value: TCP/UDP source port.
 
-For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
+*   protocol_value: L4 protocol.
 
-.. code-block:: console
+*   mask_value: participates in the match or not by bit for field above, 1b means participate
 
-    testpmd> set bonding mode 3 10
+*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
 
-set bonding primary
-~~~~~~~~~~~~~~~~~~~
+*   prio_value: the priority of this filter.
 
-Set an Ethernet slave device as the primary device on a Link Bonding device:
+*   queue_id: The receive queue associated with this 5-tuple filter.
 
-set bonding primary (slave id) (port id)
+*   index: the index of this 5-tuple filter
 
-For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
+Example:
 
 .. code-block:: console
 
-    testpmd> set bonding primary 6 10
+    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
 
-set bonding mac
-~~~~~~~~~~~~~~~
+remove_5tuple_filter
+~~~~~~~~~~~~~~~~~~~~
 
-Set the MAC address of a Link Bonding device:
+Remove a 5-tuple filter
 
-set bonding mac (port id) (mac)
+remove_5tuple_filter (port_id) index (idx)
 
-For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
+get_5tuple_filter
+~~~~~~~~~~~~~~~~~
+
+Get and display a 5-tuple filter
+
+get_5tuple_filter (port_id) index (idx)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> set bonding mac 10 00:00:00:00:00:01
+    testpmd> get_5tuple_filter 1 index 0
 
-set bonding xmit_balance_policy
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+    filter[0]:
+        Destination IP: 0x02020205 mask: 1
+        Source IP: 0x02020204 mask: 1
+        Destination Port: 0x0040 mask: 1
+        Source Port: 0x0020 mask: 1
+        protocol: 0x06 mask: 1
+        priority: 3 flags: 0x00 queue: 3
 
-Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
+add_syn_filter
+~~~~~~~~~~~~~~
 
-set bonding xmit_balance_policy (port_id) (l2|l23|l34)
+Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
 
-For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
+add_syn_filter (port_id) priority (high|low) queue (queue_id)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> set bonding xmit_balance_policy 10 l34
+*   port_id: the port which the SYN filter assigned on.
 
-show bonding config
-~~~~~~~~~~~~~~~~~~~
+*   high: this SYN filter has higher priority than other filters.
 
-Show the current configuration of a Link Bonding device:
+*   low: this SYN filter has lower priority than other filters.
 
-show bonding config (port id)
+*   queue_id: The receive queue associated with this SYN filter
 
-For example,
-to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
-in balance mode with a transmission policy of layer 2+3.
+Example:
 
 .. code-block:: console
 
-    testpmd> show bonding config 9
-        Bonding mode: 2
-        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
-        Slaves (3): [1 3 4]
-        Active Slaves (3): [1 3 4]
-        Primary: [3]
+    testpmd> add_syn_filter 0 priority high queue 3,
 
-Register Functions
-------------------
+remove_syn_filter
+~~~~~~~~~~~~~~~~~
 
-The Register functions can be used to read from and write to registers on the network card referenced by a port number.
-This is mainly useful for debugging purposes.
-Reference should be made to the appropriate datasheet for the network card for details on the register addresses
-and fields that can be accessed.
+Remove SYN filter
 
-read reg
-~~~~~~~~
+remove_syn_filter (port_id)
 
-Display the value of a port register:
+get_syn_filter
+~~~~~~~~~~~~~~
 
-read reg (port_id) (address)
+Get and display SYN filter
 
-For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
+get_syn_filter (port_id)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> read reg 0 0xEE00
-    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
+    testpmd> get_syn_filter 0
 
-read regfield
-~~~~~~~~~~~~~
+    syn filter: on, priority: high, queue: 3
 
-Display a port register bit field:
+add_flex_filter
+~~~~~~~~~~~~~~~
 
-read regfield (port_id) (address) (bit_x) (bit_y)
+Add a Flex filter,
+which recognizes any arbitrary pattern within the first 128 bytes of the packet
+and routes packets into one of the receive queues.
 
-For example, reading the lowest two bits from the register in the example above:
+add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
+priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> read regfield 0 0xEE00 0 1
-    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
+*   port_id: the port which the Flex filter assigned on.
 
-read regbit
-~~~~~~~~~~~
+*   len_value: filter length in byte, no greater than 128.
 
-Display a single port register bit:
+*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
 
-read regbit (port_id) (address) (bit_x)
+*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
 
-For example, reading the lowest bit from the register in the example above:
+*   prio_value: the priority of this filter.
 
-.. code-block:: console
+*   queue_id: The receive queue associated with this Flex filter.
 
-    testpmd> read regbit 0 0xEE00 0
-    port 0 PCI register at offset 0xEE00: bit 0=1
+*   index: the index of this Flex filter
 
-write reg
-~~~~~~~~~
+Example:
 
-Set the value of a port register:
+.. code-block:: console
 
-write reg (port_id) (address) (value)
+   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
 
-For example, to clear a register:
+Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
 
-.. code-block:: console
+remove_flex_filter
+~~~~~~~~~~~~~~~~~~
 
-    testpmd> write reg 0 0xEE00 0x0
-    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
+Remove a Flex filter
 
-write regfield
-~~~~~~~~~~~~~~
+remove_flex_filter (port_id) index (idx)
 
-Set bit field of a port register:
+get_flex_filter
+~~~~~~~~~~~~~~~
 
-write regfield (port_id) (address) (bit_x) (bit_y) (value)
+Get and display a Flex filter
 
-For example, writing to the register cleared in the example above:
+get_flex_filter (port_id) index (idx)
 
-.. code-block:: console
+Example:
 
-    testpmd> write regfield 0 0xEE00 0 1 2
-    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
+.. code-block:: console
 
-write regbit
-~~~~~~~~~~~~
+    testpmd> get_flex_filter 0 index 0
 
-Set single bit value of a port register:
+    filter[0]:
 
-write regbit (port_id) (address) (bit_x) (value)
+        length: 16
 
-For example, to set the high bit in the register from the example above:
+        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000
 
-.. code-block:: console
+        mask[]:
+    0b0000000000001100000000000000000000000000000000000000000000000000000000
+    0000000000000000000000000000000000000000000000000000000000
 
-    testpmd> write regbit 0 0xEE00 31 1
-    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
+        priority: 3   queue: 3
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v2 4/4] doc: Various document fixes in testpmd UG
  2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
                     ` (2 preceding siblings ...)
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
@ 2014-11-18 17:04   ` Pablo de Lara
  2014-11-19 13:50     ` Iremonger, Bernard
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
  4 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-11-18 17:04 UTC (permalink / raw)
  To: dev

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 8030f3b..abb3f54 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -103,7 +103,7 @@ stop
 quit
 ~~~~
 
-Quit to prompt in Linux or reboot on Baremetal:
+Quit to prompt in Linux/FreeBSD or reboot on Baremetal:
 
 quit
 
@@ -153,10 +153,12 @@ For example:
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
-Display the RSS hash functions and RSS hash key of port (port_id).
+Display the RSS hash functions and RSS hash key of a port:
 
-show port (port_id) rss-hash [key] clear port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+show port (port_id) rss-hash [key]
+
+clear port
+~~~~~~~~~~
 
 Clear the port statistics for a given port or for all ports:
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG Pablo de Lara
@ 2014-11-19 13:40     ` Iremonger, Bernard
  0 siblings, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-11-19 13:40 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Tuesday, November 18, 2014 5:05 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG
> 
> Added info in testpmd functions section for the following commands:
> 
> - tunnel_filter add
> - tunnel_filter rm
> - rx_vxlan_port add
> - rx_vxlan_port rm
> - port stop/start queue
> - set port mac address filter (for VF)
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com> 
I have applied the patch to my tree next/dpdk-doc.

> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   47 +++++++++++++++++++++++++++
>  1 files changed, 47 insertions(+), 0 deletions(-)
> 

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v2 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
@ 2014-11-19 13:42     ` Iremonger, Bernard
  0 siblings, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-11-19 13:42 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Tuesday, November 18, 2014 5:05 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 2/4] doc: Corrected info for tx_checksum set mask function, in
> testpmd UG
> 
> tx_checksum set mask function now allows 4 extra bits in the mask for TX checksum offload
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com> 
I have applied the patch to my tree next/dpdk-doc.

> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
>  1 files changed, 9 insertions(+), 1 deletions(-)
> 

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v2 3/4] doc: Moved commands in testpmd UG to match testpmd command help order
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
@ 2014-11-19 13:48     ` Iremonger, Bernard
  0 siblings, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-11-19 13:48 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Tuesday, November 18, 2014 5:05 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 3/4] doc: Moved commands in testpmd UG to match testpmd
> command help order
> 
> Moved commands in testpmd UG to set queue rates to match order in testpmd command help.
> 
> Created new section "Filters" to match that same section in testpmd UG, and moved all commands
> related to it there.
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

 I have applied the patch to my tree next/dpdk-doc.

> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1019 ++++++++++++++-------------
>  1 files changed, 512 insertions(+), 507 deletions(-)

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v2 4/4] doc: Various document fixes in testpmd UG
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
@ 2014-11-19 13:50     ` Iremonger, Bernard
  0 siblings, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-11-19 13:50 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Tuesday, November 18, 2014 5:05 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 4/4] doc: Various document fixes in testpmd UG
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

 I have applied the patch to my tree next/dpdk-doc.

> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 ++++++----
>  1 files changed, 6 insertions(+), 4 deletions(-)

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-17 10:47     ` De Lara Guarch, Pablo
@ 2014-11-26 12:41       ` Thomas Monjalon
  2014-11-26 13:26         ` De Lara Guarch, Pablo
  0 siblings, 1 reply; 42+ messages in thread
From: Thomas Monjalon @ 2014-11-26 12:41 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

Hi Pablo,

2014-11-17 10:47, De Lara Guarch, Pablo:
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Olivier MATZ
> > On 11/15/2014 08:13 PM, Pablo de Lara wrote:
> > > tx_checksum set mask function now allows 4 extra bits in the mask
> > > for TX checksum offload
> > >
> > > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> > > ---
> > >  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
> > >  1 files changed, 9 insertions(+), 1 deletions(-)
> > 
> > A patch reworking the csumonly API is pending:
> > http://dpdk.org/ml/archives/dev/2014-November/008188.html
> > 
> > I don't know if it will be accepted, but just to mention that
> > these 2 patches will conflict in this case.
> 
> Thanks for spotting it! I guess that at this point, all we can do is wait.
> If you patch gets applied before mine, I will send a v2 with the changes.
> If it gets applied after, then I will send another patch to fix it.

Oliver will send a v4 of his TSO patchset which should be applied shortly.
Please could you adjust the documentation and make a v2?

Bernard, we have to wait for this change.

Thanks to all
-- 
Thomas

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-26 12:41       ` Thomas Monjalon
@ 2014-11-26 13:26         ` De Lara Guarch, Pablo
  0 siblings, 0 replies; 42+ messages in thread
From: De Lara Guarch, Pablo @ 2014-11-26 13:26 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev



> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
> Sent: Wednesday, November 26, 2014 12:41 PM
> To: De Lara Guarch, Pablo
> Cc: dev@dpdk.org; Olivier MATZ; Iremonger, Bernard
> Subject: Re: [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set
> mask function, in testpmd UG
> 
> Hi Pablo,
> 
> 2014-11-17 10:47, De Lara Guarch, Pablo:
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Olivier MATZ
> > > On 11/15/2014 08:13 PM, Pablo de Lara wrote:
> > > > tx_checksum set mask function now allows 4 extra bits in the mask
> > > > for TX checksum offload
> > > >
> > > > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> > > > ---
> > > >  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   10 +++++++++-
> > > >  1 files changed, 9 insertions(+), 1 deletions(-)
> > >
> > > A patch reworking the csumonly API is pending:
> > > http://dpdk.org/ml/archives/dev/2014-November/008188.html
> > >
> > > I don't know if it will be accepted, but just to mention that
> > > these 2 patches will conflict in this case.
> >
> > Thanks for spotting it! I guess that at this point, all we can do is wait.
> > If you patch gets applied before mine, I will send a v2 with the changes.
> > If it gets applied after, then I will send another patch to fix it.
> 
> Oliver will send a v4 of his TSO patchset which should be applied shortly.
> Please could you adjust the documentation and make a v2?
> 
> Bernard, we have to wait for this change.

Sure, no problem.
> 
> Thanks to all
> --
> Thomas

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management
  2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
                     ` (3 preceding siblings ...)
  2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
@ 2014-11-27 16:49   ` Pablo de Lara
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 1/4] doc: Added new commands in testpmd UG Pablo de Lara
                       ` (5 more replies)
  4 siblings, 6 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 16:49 UTC (permalink / raw)
  To: dev

TestPMD app has been added new commands, which should be reflected
in the user guide. Also, this patchset fixes several typos and
changes the location of the description of some commands.

Changes in v3:

Added new missing existing command "show port rss reta"
Added new commands from TSO support patchset
Modified info for command "tx_cksum set" command

Changes in v2:

Title underline in added commands was too short.

Pablo de Lara (4):
  doc: Added new commands in testpmd UG
  doc: Corrected info for tx_checksum set mask function, in testpmd UG
  doc: Moved commands in testpmd UG to match testpmd command help order
  doc: Various document fixes in testpmd UG

 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1128 ++++++++++++++-------------
 1 files changed, 605 insertions(+), 523 deletions(-)

-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v3 1/4] doc: Added new commands in testpmd UG
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
@ 2014-11-27 16:49     ` Pablo de Lara
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
                       ` (4 subsequent siblings)
  5 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 16:49 UTC (permalink / raw)
  To: dev

Added info in testpmd functions section for the following commands:

- tunnel_filter add
- tunnel_filter rm
- rx_vxlan_port add
- rx_vxlan_port rm
- port stop/start queue
- set port mac address filter (for VF)
- tx_checksum set
- tso set
- tso show

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   79 +++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 5e62ff9..c010577 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -150,6 +150,15 @@ For example:
         filter on
         qinq(extend) off
 
+show port rss reta
+~~~~~~~~~~~~~~~~~~
+
+Display the rss redirection table entry indicated by masks on port X:
+
+show port (port_id) rss reta (size) (mask0, mask1...)
+
+size is used to indicate the hardware supported reta size
+
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
@@ -456,6 +465,36 @@ Set the outer VLAN TPID for packet filtering on a port:
 
 rx_vlan set tpid (value) (port_id)
 
+tunnel_filter add
+~~~~~~~~~~~~~~~~~
+
+Add a tunnel filter on a port:
+
+tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+tunnel_filter remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove a tunnel filter on a port:
+
+tunnel_filter rm (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+rx_vxlan_port add
+~~~~~~~~~~~~~~~~~
+
+Add an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port add (udp_port) (port_id)
+
+rx_vxlan_port remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port rm (udp_port) (port_id)
+
 tx_vlan set
 ~~~~~~~~~~~
 
@@ -498,6 +537,29 @@ bit 3 - if set insert sctp checksum offload
 
     Check the NIC Datasheet for hardware limits.
 
+tx_checksum show
+~~~~~~~~~~~~~~~~
+
+Display tx checksum offload configuration:
+
+tx_checksum show (port_id)
+
+tso set
+~~~~~~~
+
+Enable TCP Segmentation Offload in csum forward engine:
+
+tso set (segsize) (port_id)
+
+.. note::
+   Please check the NIC datasheet for HW limits
+
+tso show
+~~~~~~~~
+
+Display the status of TCP Segmentation Offload:
+
+tso show (port_id)
 
 set fwd
 ~~~~~~~
@@ -635,6 +697,14 @@ Set VF receive/transmit from a port:
 
 set port (port_id) vf (vf_id) (rx|tx) (on|off)
 
+set port - mac address filter (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add/Remove unicast or multicast MAC addr filter for a VF:
+
+set port (port_id) vf (vf_id) (mac_addr)
+ (exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) (on|off)
+
 set port - rx mode(for VF)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1061,6 +1131,15 @@ Close all ports or a specific port:
 
 port close (port_id|all)
 
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
+
+Start/stop a rx/tx queue on a specific port:
+
+port (port_id) (rxq|txq) (queue_id) (start|stop)
+
+Only take effect when port is started.
+
 port config - speed
 ~~~~~~~~~~~~~~~~~~~
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v3 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 1/4] doc: Added new commands in testpmd UG Pablo de Lara
@ 2014-11-27 16:49     ` Pablo de Lara
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
                       ` (3 subsequent siblings)
  5 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 16:49 UTC (permalink / raw)
  To: dev

tx_checksum set function does not use bitmask anymore, but strings

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   21 ++++++++-------------
 1 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c010577..975929e 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -516,22 +516,17 @@ Disable hardware insertion of a VLAN header in packets sent on a port:
 
 tx_vlan reset (port_id)
 
-tx_checksum set mask
-~~~~~~~~~~~~~~~~~~~~
-
-Enable hardware insertion of checksum offload with a 4-bit mask, 0x0 - 0xF, in packets sent on a port:
-
-tx_checksum set (mask) (port_id)
-
-The bits in the mask are:
-
-bit 0 - if set insert ip checksum offload
+tx_checksum set
+~~~~~~~~~~~~~~~
 
-bit 1 - if set insert udp checksum offload
+Select hardware or software calculation of the checksum when
+transmitting a packet using the csum forward engine:
 
-bit 2 - if set insert tcp checksum offload
+tx_cksum set (ip|udp|tcp|sctp|vxlan)
 
-bit 3 - if set insert sctp checksum offload
+ip|udp|tcp|sctp always concern the inner layer.
+vxlan concerns the outer IP and UDP layer (in case the packet
+is recognized as a vxlan packet by the forward engine)
 
 .. note::
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v3 3/4] doc: Moved commands in testpmd UG to match testpmd command help order
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 1/4] doc: Added new commands in testpmd UG Pablo de Lara
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
@ 2014-11-27 16:49     ` Pablo de Lara
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
                       ` (2 subsequent siblings)
  5 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 16:49 UTC (permalink / raw)
  To: dev

Moved commands in testpmd UG to set queue rates
to match order in testpmd command help.

Created new section "Filters" to match that
same section in testpmd UG, and moved all
commands related to it there.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1042 ++++++++++++++-------------
 1 files changed, 524 insertions(+), 518 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 975929e..84b7bc3 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -444,20 +444,6 @@ Remove a VLAN ID, from the set of VLAN identifiers filtered for VF(s) for port I
 
 rx_vlan rm (vlan_id) port (port_id) vf (vf_mask)
 
-tx_rate (for Queue)
-~~~~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queue of a port ID:
-
-set port (port_id) queue (queue_id) rate (rate_value)
-
-tx_rate (for VF)
-~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queues in VF of a port ID:
-
-set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
-
 rx_vlan set tpid
 ~~~~~~~~~~~~~~~~
 
@@ -717,6 +703,20 @@ The available receive modes are:
 
 *  MPE: accepts all multicast packets
 
+set port - tx_rate (for Queue)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queue of a port ID:
+
+set port (port_id) queue (queue_id) rate (rate_value)
+
+set port - tx_rate (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queues in VF of a port ID:
+
+set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
+
 set port - mirror rule
 ~~~~~~~~~~~~~~~~~~~~~~
 
@@ -783,903 +783,909 @@ Show the bypass configuration for a bypass enabled NIC using the lowest port on
 
 show bypass config (port_id)
 
-add_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+set link up
+~~~~~~~~~~~
 
-Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
+Set link up for a port.
 
-add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
+set link-up port (port id)
 
-The available information parameters are:
+set link down
+~~~~~~~~~~~~~
 
-*   port_id:  the port which the Ethertype filter assigned on.
+Set link down for a port.
 
-*   eth_value: the EtherType value want to match,
-    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
+set link-down port (port id)
 
-*   enable: user priority participates in the match.
+Port Functions
+--------------
 
-*   disable: user priority doesn't participate in the match.
+The following sections show functions for configuring ports.
 
-*   pri_value: user priority value that want to match.
+.. note::
 
-*   queue_id : The receive queue associated with this EtherType filter
+    Port configuration changes only become active when forwarding is started/restarted.
 
-*   index: the index of this EtherType filter
+port start
+~~~~~~~~~~
 
-Example:
+Start all ports or a specific port:
 
-.. code-block:: console
+port start (port_id|all)
 
-    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
-    Assign ARP packet to receive queue 3
+port stop
+~~~~~~~~~
 
-remove_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~~~~
+Stop all ports or a specific port:
 
-Remove a L2 Ethertype filter
+port stop (port_id|all)
 
-remove_ethertype_filter (port_id) index (idx)
+port close
+~~~~~~~~~~
 
-get_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+Close all ports or a specific port:
 
-Get and display a L2 Ethertype filter
+port close (port_id|all)
 
-get_ethertype_filter (port_id) index (idx)
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
 
-Example:
+Start/stop a rx/tx queue on a specific port:
 
-.. code-block:: console
+port (port_id) (rxq|txq) (queue_id) (start|stop)
 
-    testpmd> get_ethertype_filter 0 index 0
+Only take effect when port is started.
 
-    filter[0]:
-        ethertype: 0x0806
-        priority: disable, 0
-        queue: 3
+port config - speed
+~~~~~~~~~~~~~~~~~~~
 
-add_2tuple_filter
-~~~~~~~~~~~~~~~~~
+Set the speed and duplex mode for all ports or a specific port:
 
-Add a 2-tuple filter,
-which identify packets by specific protocol and destination TCP/UDP port
-and forwards packets into one of the receive queues.
+port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
 
-add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
-flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
+port config - queues/descriptors
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The available information parameters are:
+Set number of queues/descriptors for rxq, txq, rxd and txd:
 
-*   port_id: the port which the 2-tuple filter assigned on.
+port config all (rxq|txq|rxd|txd) (value)
 
-*   pro_value: IP L4 protocol
+This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
 
-*   pro_mask: protocol participates in the match or not, 1 means participate
+port config - max-pkt-len
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   port_value: destination port in L4.
+Set the maximum packet length:
 
-*   port_mask: destination port participates in the match or not, 1 means participate.
+port config all max-pkt-len (value)
 
-*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
+This is equivalent to the --max-pkt-len command-line option.
 
-*   prio_value: the priority of this filter.
+port config - CRC Strip
+~~~~~~~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 2-tuple filter
+Set hardware CRC stripping on or off for all ports:
 
-*   index: the index of this 2-tuple filter
+port config all crc-strip (on|off)
 
-Example:
+CRC stripping is off by default.
 
-.. code-block:: console
+The on option is equivalent to the --crc-strip command-line option.
 
-    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
+port config - RX Checksum
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-remove_2tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+Set hardware RX checksum offload to on or off for all ports:
 
-Remove a 2-tuple filter
+port config all rx-cksum (on|off)
 
-remove_2tuple_filter (port_id) index (idx)
+Checksum offload is off by default.
 
-get_2tuple_filter
-~~~~~~~~~~~~~~~~~
+The on option is equivalent to the --enable-rx-cksum command-line option.
 
-Get and display a 2-tuple filter
+port config - VLAN
+~~~~~~~~~~~~~~~~~~
 
-get_2tuple_filter (port_id) index (idx)
+Set hardware VLAN on or off for all ports:
 
-Example:
+port config all hw-vlan (on|off)
 
-.. code-block:: console
+Hardware VLAN is on by default.
 
-    testpmd> get_2tuple_filter 0 index 0
+The off option is equivalent to the --disable-hw-vlan command-line option.
 
-    filter[0]:
-        Destination Port: 0x0020 mask: 1
-        protocol: 0x06 mask:1 tcp_flags: 0x02
-        priority: 3   queue: 3
+port config - Drop Packets
+~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-add_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set packet drop for packets with no descriptors on or off for all ports:
 
-Add a 5-tuple filter,
-which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
-and routes packets into one of the receive queues.
+port config all drop-en (on|off)
 
-add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
-protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
+Packet dropping for packets with no descriptors is off by default.
 
-The available information parameters are:
+The on option is equivalent to the --enable-drop-en command-line option.
 
-*   port_id: the port which the 5-tuple filter assigned on.
+port config - RSS
+~~~~~~~~~~~~~~~~~
 
-*   dst_address: destination IP address.
+Set the RSS (Receive Side Scaling) mode on or off:
 
-*   src_address: source IP address.
+port config all rss (ip|udp|none)
 
-*   dst_port_value: TCP/UDP destination port.
+RSS is on by default.
 
-*   src_port_value: TCP/UDP source port.
+The off option is equivalent to the --disable-rss command-line option.
 
-*   protocol_value: L4 protocol.
+port config - RSS Reta
+~~~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: participates in the match or not by bit for field above, 1b means participate
+Set the RSS (Receive Side Scaling) redirection table:
 
-*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
+port config all rss reta (hash,queue)[,(hash,queue)]
 
-*   prio_value: the priority of this filter.
+port config - DCB
+~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 5-tuple filter.
+Set the DCB mode for an individual port:
 
-*   index: the index of this 5-tuple filter
+port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
 
-Example:
+The traffic class should be 4 or 8.
 
-.. code-block:: console
+port config - Burst
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
+Set the number of packets per burst:
 
-remove_5tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+port config all burst (value)
 
-Remove a 5-tuple filter
+This is equivalent to the --burst command-line option.
 
-remove_5tuple_filter (port_id) index (idx)
+port config - Threshold
+~~~~~~~~~~~~~~~~~~~~~~~
 
-get_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set thresholds for TX/RX queues:
 
-Get and display a 5-tuple filter
+port config all (threshold) (value)
 
-get_5tuple_filter (port_id) index (idx)
+Where the threshold type can be:
 
-Example:
+*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
 
-.. code-block:: console
+*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
 
-    testpmd> get_5tuple_filter 1 index 0
+*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
 
-    filter[0]:
-        Destination IP: 0x02020205 mask: 1
-        Source IP: 0x02020204 mask: 1
-        Destination Port: 0x0040 mask: 1
-        Source Port: 0x0020 mask: 1
-        protocol: 0x06 mask: 1
-        priority: 3 flags: 0x00 queue: 3
+*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter
-~~~~~~~~~~~~~~
+*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
 
-Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
+*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter (port_id) priority (high|low) queue (queue_id)
+*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
 
-The available information parameters are:
+*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
 
-*   port_id: the port which the SYN filter assigned on.
+*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
+    These threshold options are also available from the command-line.
 
-*   high: this SYN filter has higher priority than other filters.
+Flow Director Functions
+-----------------------
 
-*   low: this SYN filter has lower priority than other filters.
+The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
 
-*   queue_id: The receive queue associated with this SYN filter
+Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
 
-Example:
+*   Perfect match filters.
+    The hardware checks a match between the masked fields of the received packets and the programmed filters.
 
-.. code-block:: console
+*   Signature filters.
+    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
 
-    testpmd> add_syn_filter 0 priority high queue 3,
+The Flow Director filters can match the following fields in a packet:
 
-remove_syn_filter
-~~~~~~~~~~~~~~~~~
+*   Source IP and destination IP addresses.
 
-Remove SYN filter
+*   Source port and destination port numbers (for UDP and TCP packets).
 
-remove_syn_filter (port_id)
+*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
 
-get_syn_filter
-~~~~~~~~~~~~~~
+*   VLAN header.
 
-Get and display SYN filter
+*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
 
-get_syn_filter (port_id)
+The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
+or parts of the fields.
+For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
 
-Example:
+In the following sections, several common parameters are used in the Flow Director filters.
+These are explained below:
 
-.. code-block:: console
+*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
 
-    testpmd> get_syn_filter 0
+    src 192.168.0.1 1024
 
-    syn filter: on, priority: high, queue: 3
+    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
 
-add_flex_filter
-~~~~~~~~~~~~~~~
+*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
 
-Add a Flex filter,
-which recognizes any arbitrary pattern within the first 128 bytes of the packet
-and routes packets into one of the receive queues.
+*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
 
-add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
-priority (prio_value) queue (queue_id) index (idx)
+The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
+and is counted from the first byte of the destination Ethernet MAC address.
+The default offset is 0xC bytes, which is the "Type" word in the MAC header.
+Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
+These values change when a VLAN tag is added.
 
-The available information parameters are:
+*   vlan: The VLAN header to match in the packet.
 
-*   port_id: the port which the Flex filter assigned on.
+*   queue: The index of the RX queue to route matched packets to.
 
-*   len_value: filter length in byte, no greater than 128.
+*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
 
-*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
+add_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
+Add a signature filter:
 
-*   prio_value: the priority of this filter.
+# Command is displayed on several lines for clarity.
 
-*   queue_id: The receive queue associated with this Flex filter.
+add_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-*   index: the index of this Flex filter
+    src (src_ip_address) (src_port)
 
-Example:
+    dst (dst_ip_address) (dst_port)
 
-.. code-block:: console
+    flexbytes (flexbytes_values)
 
-   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
+    vlan (vlan_id) queue (queue_id)
 
-Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
+upd_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-remove_flex_filter
-~~~~~~~~~~~~~~~~~~
+Update a signature filter:
 
-Remove a Flex filter
+# Command is displayed on several lines for clarity.
 
-remove_flex_filter (port_id) index (idx)
+upd_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-get_flex_filter
-~~~~~~~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Get and display a Flex filter
+    dst (dst_ip_address) (dst_port)
 
-get_flex_filter (port_id) index (idx)
+    flexbytes (flexbytes_values)
 
-Example:
+    vlan (vlan_id) queue (queue_id)
 
-.. code-block:: console
+rm_signature_filter
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> get_flex_filter 0 index 0
+Remove a signature filter:
 
-    filter[0]:
+# Command is displayed on several lines for clarity.
 
-        length: 16
+rm_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    src (src_ip_address) (src_port)
 
-        mask[]:
-    0b0000000000001100000000000000000000000000000000000000000000000000000000
-    0000000000000000000000000000000000000000000000000000000000
+    dst (dst_ip_address) (dst_port)
 
-        priority: 3   queue: 3
+    flexbytes (flexbytes_values)
 
-set link up
-~~~~~~~~~~~
+    vlan (vlan_id)
 
-Set link up for a port.
+add_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-set link-up port (port id)
+Add a perfect filter:
 
-set link down
-~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set link down for a port.
+add_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-set link-down port (port id)
+    src (src_ip_address) (src_port)
 
-Port Functions
---------------
+    dst (dst_ip_address) (dst_port)
 
-The following sections show functions for configuring ports.
+    flexbytes (flexbytes_values)
 
-.. note::
+    vlan (vlan_id) queue (queue_id) soft (soft_id)
 
-    Port configuration changes only become active when forwarding is started/restarted.
+upd_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-port start
-~~~~~~~~~~
+Update a perfect filter:
 
-Start all ports or a specific port:
+# Command is displayed on several lines for clarity.
 
-port start (port_id|all)
+upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-port stop
-~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Stop all ports or a specific port:
+    dst (dst_ip_address) (dst_port)
 
-port stop (port_id|all)
+    flexbytes (flexbytes_values)
 
-port close
-~~~~~~~~~~
+    vlan (vlan_id) queue (queue_id)
 
-Close all ports or a specific port:
+rm_perfect_filter
+~~~~~~~~~~~~~~~~~
 
-port close (port_id|all)
+Remove a perfect filter:
 
-port start/stop queue
-~~~~~~~~~~~~~~~~~~~~~
+rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-Start/stop a rx/tx queue on a specific port:
+    src (src_ip_address) (src_port)
 
-port (port_id) (rxq|txq) (queue_id) (start|stop)
+    dst (dst_ip_address) (dst_port)
 
-Only take effect when port is started.
+    flexbytes (flexbytes_values)
 
-port config - speed
-~~~~~~~~~~~~~~~~~~~
+    vlan (vlan_id) soft (soft_id)
 
-Set the speed and duplex mode for all ports or a specific port:
+set_masks_filter
+~~~~~~~~~~~~~~~~
 
-port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
+Set IPv4 filter masks:
 
-port config - queues/descriptors
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set number of queues/descriptors for rxq, txq, rxd and txd:
+set_masks_filter (port_id) only_ip_flow (0|1)
 
-port config all (rxq|txq|rxd|txd) (value)
+    src_mask (ip_src_mask) (src_port_mask)
 
-This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-port config - max-pkt-len
-~~~~~~~~~~~~~~~~~~~~~~~~~
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-Set the maximum packet length:
+set_ipv6_masks_filter
+~~~~~~~~~~~~~~~~~~~~~
 
-port config all max-pkt-len (value)
+Set IPv6 filter masks:
 
-This is equivalent to the --max-pkt-len command-line option.
+# Command is displayed on several lines for clarity.
 
-port config - CRC Strip
-~~~~~~~~~~~~~~~~~~~~~~~
+set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
 
-Set hardware CRC stripping on or off for all ports:
+    src_mask (ip_src_mask) (src_port_mask)
 
-port config all crc-strip (on|off)
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-CRC stripping is off by default.
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-The on option is equivalent to the --crc-strip command-line option.
+    compare_dst (0|1)
 
-port config - RX Checksum
-~~~~~~~~~~~~~~~~~~~~~~~~~
+Link Bonding Functions
+----------------------
 
-Set hardware RX checksum offload to on or off for all ports:
+The Link Bonding functions make it possible to dynamically create and
+manage link bonding devices from within testpmd interactive prompt.
 
-port config all rx-cksum (on|off)
+create bonded device
+~~~~~~~~~~~~~~~~~~~~
 
-Checksum offload is off by default.
+Create a new bonding device:
 
-The on option is equivalent to the --enable-rx-cksum command-line option.
+create bonded device (mode) (socket)
 
-port config - VLAN
-~~~~~~~~~~~~~~~~~~
+For example, to create a bonded device in mode 1 on socket 0.
 
-Set hardware VLAN on or off for all ports:
+.. code-block:: console
 
-port config all hw-vlan (on|off)
+    testpmd> create bonded 1 0
+    created new bonded device (port X)
 
-Hardware VLAN is on by default.
+add bonding slave
+~~~~~~~~~~~~~~~~~
 
-The off option is equivalent to the --disable-hw-vlan command-line option.
+Adds Ethernet device to a Link Bonding device:
 
-port config - Drop Packets
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+add bonding slave (slave id) (port id)
 
-Set packet drop for packets with no descriptors on or off for all ports:
+For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
 
-port config all drop-en (on|off)
+.. code-block:: console
 
-Packet dropping for packets with no descriptors is off by default.
+    testpmd> add bonding slave 6 10
 
-The on option is equivalent to the --enable-drop-en command-line option.
 
-port config - RSS
-~~~~~~~~~~~~~~~~~
+remove bonding slave
+~~~~~~~~~~~~~~~~~~~~
 
-Set the RSS (Receive Side Scaling) mode on or off:
+Removes an Ethernet slave device from a Link Bonding device:
 
-port config all rss (ip|udp|none)
+remove bonding slave (slave id) (port id)
 
-RSS is on by default.
+For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
 
-The off option is equivalent to the --disable-rss command-line option.
+.. code-block:: console
 
-port config - RSS Reta
-~~~~~~~~~~~~~~~~~~~~~~
+    testpmd> remove bonding slave 6 10
 
-Set the RSS (Receive Side Scaling) redirection table:
+set bonding mode
+~~~~~~~~~~~~~~~~
 
-port config all rss reta (hash,queue)[,(hash,queue)]
+Set the Link Bonding mode of a Link Bonding device:
 
-port config - DCB
-~~~~~~~~~~~~~~~~~
+set bonding mode (value) (port id)
 
-Set the DCB mode for an individual port:
+For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
 
-port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
+.. code-block:: console
 
-The traffic class should be 4 or 8.
+    testpmd> set bonding mode 3 10
 
-port config - Burst
+set bonding primary
 ~~~~~~~~~~~~~~~~~~~
 
-Set the number of packets per burst:
-
-port config all burst (value)
-
-This is equivalent to the --burst command-line option.
-
-port config - Threshold
-~~~~~~~~~~~~~~~~~~~~~~~
+Set an Ethernet slave device as the primary device on a Link Bonding device:
 
-Set thresholds for TX/RX queues:
+set bonding primary (slave id) (port id)
 
-port config all (threshold) (value)
+For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
 
-Where the threshold type can be:
+.. code-block:: console
 
-*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
+    testpmd> set bonding primary 6 10
 
-*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac
+~~~~~~~~~~~~~~~
 
-*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
+Set the MAC address of a Link Bonding device:
 
-*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
+set bonding mac (port id) (mac)
 
-*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
+For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
 
-*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
+.. code-block:: console
 
-*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
+    testpmd> set bonding mac 10 00:00:00:00:00:01
 
-*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
+set bonding xmit_balance_policy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
-    These threshold options are also available from the command-line.
+Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
 
-Flow Director Functions
------------------------
+set bonding xmit_balance_policy (port_id) (l2|l23|l34)
 
-The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
+For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
 
-Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
+.. code-block:: console
 
-*   Perfect match filters.
-    The hardware checks a match between the masked fields of the received packets and the programmed filters.
+    testpmd> set bonding xmit_balance_policy 10 l34
 
-*   Signature filters.
-    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
 
-The Flow Director filters can match the following fields in a packet:
+set bonding mon_period
+~~~~~~~~~~~~~~~~~~~~~~
 
-*   Source IP and destination IP addresses.
+Set the link status monitoring polling period in milliseconds for a bonding devicie.
 
-*   Source port and destination port numbers (for UDP and TCP packets).
+This adds support for PMD slave devices which do not support link status interrupts.
+When the mon_period is set to a value greater than 0 then all PMD's which do not support
+link status ISR will be queried every polling interval to check if their link status has changed.
 
-*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
+set bonding mon_period (port_id) (value)
 
-*   VLAN header.
+For example, to set the link status monitoring polling period of bonded device (port 5) to 150ms
 
-*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
+.. code-block:: console
 
-The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
-or parts of the fields.
-For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
+    testpmd> set bonding mon_period 5 150
 
-In the following sections, several common parameters are used in the Flow Director filters.
-These are explained below:
 
-*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
+show bonding config
+~~~~~~~~~~~~~~~~~~~
 
-    src 192.168.0.1 1024
+Show the current configuration of a Link Bonding device:
 
-    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
+show bonding config (port id)
 
-*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
+For example,
+to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
+in balance mode with a transmission policy of layer 2+3.
 
-*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
+.. code-block:: console
 
-The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
-and is counted from the first byte of the destination Ethernet MAC address.
-The default offset is 0xC bytes, which is the "Type" word in the MAC header.
-Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
-These values change when a VLAN tag is added.
+    testpmd> show bonding config 9
+        Bonding mode: 2
+        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
+        Slaves (3): [1 3 4]
+        Active Slaves (3): [1 3 4]
+        Primary: [3]
 
-*   vlan: The VLAN header to match in the packet.
+Register Functions
+------------------
 
-*   queue: The index of the RX queue to route matched packets to.
+The Register functions can be used to read from and write to registers on the network card referenced by a port number.
+This is mainly useful for debugging purposes.
+Reference should be made to the appropriate datasheet for the network card for details on the register addresses
+and fields that can be accessed.
 
-*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
+read reg
+~~~~~~~~
 
-add_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+Display the value of a port register:
 
-Add a signature filter:
+read reg (port_id) (address)
 
-# Command is displayed on several lines for clarity.
+For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
 
-add_signature_filter (port_id) (ip|udp|tcp|sctp)
+.. code-block:: console
 
-    src (src_ip_address) (src_port)
+    testpmd> read reg 0 0xEE00
+    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
 
-    dst (dst_ip_address) (dst_port)
+read regfield
+~~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Display a port register bit field:
 
-    vlan (vlan_id) queue (queue_id)
+read regfield (port_id) (address) (bit_x) (bit_y)
 
-upd_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+For example, reading the lowest two bits from the register in the example above:
 
-Update a signature filter:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> read regfield 0 0xEE00 0 1
+    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
 
-upd_signature_filter (port_id) (ip|udp|tcp|sctp)
+read regbit
+~~~~~~~~~~~
 
-    src (src_ip_address) (src_port)
+Display a single port register bit:
 
-    dst (dst_ip_address) (dst_port)
+read regbit (port_id) (address) (bit_x)
 
-    flexbytes (flexbytes_values)
+For example, reading the lowest bit from the register in the example above:
 
-    vlan (vlan_id) queue (queue_id)
+.. code-block:: console
 
-rm_signature_filter
-~~~~~~~~~~~~~~~~~~~
+    testpmd> read regbit 0 0xEE00 0
+    port 0 PCI register at offset 0xEE00: bit 0=1
 
-Remove a signature filter:
+write reg
+~~~~~~~~~
 
-# Command is displayed on several lines for clarity.
+Set the value of a port register:
 
-rm_signature_filter (port_id) (ip|udp|tcp|sctp)
+write reg (port_id) (address) (value)
 
-    src (src_ip_address) (src_port)
+For example, to clear a register:
 
-    dst (dst_ip_address) (dst_port)
+.. code-block:: console
 
-    flexbytes (flexbytes_values)
+    testpmd> write reg 0 0xEE00 0x0
+    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
 
-    vlan (vlan_id)
+write regfield
+~~~~~~~~~~~~~~
 
-add_perfect_filter
-~~~~~~~~~~~~~~~~~~
+Set bit field of a port register:
 
-Add a perfect filter:
+write regfield (port_id) (address) (bit_x) (bit_y) (value)
 
-# Command is displayed on several lines for clarity.
+For example, writing to the register cleared in the example above:
 
-add_perfect_filter (port_id) (ip|udp|tcp|sctp)
+.. code-block:: console
 
-    src (src_ip_address) (src_port)
+    testpmd> write regfield 0 0xEE00 0 1 2
+    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
 
-    dst (dst_ip_address) (dst_port)
+write regbit
+~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Set single bit value of a port register:
 
-    vlan (vlan_id) queue (queue_id) soft (soft_id)
+write regbit (port_id) (address) (bit_x) (value)
 
-upd_perfect_filter
-~~~~~~~~~~~~~~~~~~
+For example, to set the high bit in the register from the example above:
 
-Update a perfect filter:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> write regbit 0 0xEE00 31 1
+    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
 
-upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
+Filter Functions
+----------------
+ 
+This section details the available filter functions that are available.
 
-    src (src_ip_address) (src_port)
+add_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-    dst (dst_ip_address) (dst_port)
+Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
 
-    flexbytes (flexbytes_values)
+add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
 
-    vlan (vlan_id) queue (queue_id)
+The available information parameters are:
 
-rm_perfect_filter
-~~~~~~~~~~~~~~~~~
+*   port_id:  the port which the Ethertype filter assigned on.
 
-Remove a perfect filter:
+*   eth_value: the EtherType value want to match,
+    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
 
-rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
+*   enable: user priority participates in the match.
 
-    src (src_ip_address) (src_port)
+*   disable: user priority doesn't participate in the match.
 
-    dst (dst_ip_address) (dst_port)
+*   pri_value: user priority value that want to match.
 
-    flexbytes (flexbytes_values)
+*   queue_id : The receive queue associated with this EtherType filter
 
-    vlan (vlan_id) soft (soft_id)
+*   index: the index of this EtherType filter
 
-set_masks_filter
-~~~~~~~~~~~~~~~~
+Example:
 
-Set IPv4 filter masks:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
+    Assign ARP packet to receive queue 3
 
-set_masks_filter (port_id) only_ip_flow (0|1)
+remove_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~~~~
 
-    src_mask (ip_src_mask) (src_port_mask)
+Remove a L2 Ethertype filter
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+remove_ethertype_filter (port_id) index (idx)
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+get_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-set_ipv6_masks_filter
-~~~~~~~~~~~~~~~~~~~~~
+Get and display a L2 Ethertype filter
 
-Set IPv6 filter masks:
+get_ethertype_filter (port_id) index (idx)
 
-# Command is displayed on several lines for clarity.
+Example:
 
-set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
+.. code-block:: console
 
-    src_mask (ip_src_mask) (src_port_mask)
+    testpmd> get_ethertype_filter 0 index 0
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+    filter[0]:
+        ethertype: 0x0806
+        priority: disable, 0
+        queue: 3
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+add_2tuple_filter
+~~~~~~~~~~~~~~~~~
 
-    compare_dst (0|1)
+Add a 2-tuple filter,
+which identify packets by specific protocol and destination TCP/UDP port
+and forwards packets into one of the receive queues.
 
-Link Bonding Functions
-----------------------
+add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
+flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
 
-The Link Bonding functions make it possible to dynamically create and
-manage link bonding devices from within testpmd interactive prompt.
+The available information parameters are:
 
-create bonded device
-~~~~~~~~~~~~~~~~~~~~
+*   port_id: the port which the 2-tuple filter assigned on.
 
-Create a new bonding device:
+*   pro_value: IP L4 protocol
 
-create bonded device (mode) (socket)
+*   pro_mask: protocol participates in the match or not, 1 means participate
 
-For example, to create a bonded device in mode 1 on socket 0.
+*   port_value: destination port in L4.
 
-.. code-block:: console
+*   port_mask: destination port participates in the match or not, 1 means participate.
 
-    testpmd> create bonded 1 0
-    created new bonded device (port X)
+*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
 
-add bonding slave
-~~~~~~~~~~~~~~~~~
+*   prio_value: the priority of this filter.
 
-Adds Ethernet device to a Link Bonding device:
+*   queue_id: The receive queue associated with this 2-tuple filter
 
-add bonding slave (slave id) (port id)
+*   index: the index of this 2-tuple filter
 
-For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
+Example:
 
 .. code-block:: console
 
-    testpmd> add bonding slave 6 10
-
+    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
 
-remove bonding slave
+remove_2tuple_filter
 ~~~~~~~~~~~~~~~~~~~~
 
-Removes an Ethernet slave device from a Link Bonding device:
+Remove a 2-tuple filter
 
-remove bonding slave (slave id) (port id)
+remove_2tuple_filter (port_id) index (idx)
 
-For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
+get_2tuple_filter
+~~~~~~~~~~~~~~~~~
+
+Get and display a 2-tuple filter
+
+get_2tuple_filter (port_id) index (idx)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> remove bonding slave 6 10
+    testpmd> get_2tuple_filter 0 index 0
 
-set bonding mode
-~~~~~~~~~~~~~~~~
+    filter[0]:
+        Destination Port: 0x0020 mask: 1
+        protocol: 0x06 mask:1 tcp_flags: 0x02
+        priority: 3   queue: 3
 
-Set the Link Bonding mode of a Link Bonding device:
+add_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-set bonding mode (value) (port id)
+Add a 5-tuple filter,
+which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
+and routes packets into one of the receive queues.
 
-For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
+add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
+protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> set bonding mode 3 10
+*   port_id: the port which the 5-tuple filter assigned on.
 
-set bonding primary
-~~~~~~~~~~~~~~~~~~~
+*   dst_address: destination IP address.
 
-Set an Ethernet slave device as the primary device on a Link Bonding device:
+*   src_address: source IP address.
 
-set bonding primary (slave id) (port id)
+*   dst_port_value: TCP/UDP destination port.
 
-For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
+*   src_port_value: TCP/UDP source port.
 
-.. code-block:: console
+*   protocol_value: L4 protocol.
 
-    testpmd> set bonding primary 6 10
+*   mask_value: participates in the match or not by bit for field above, 1b means participate
 
-set bonding mac
-~~~~~~~~~~~~~~~
+*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
 
-Set the MAC address of a Link Bonding device:
+*   prio_value: the priority of this filter.
 
-set bonding mac (port id) (mac)
+*   queue_id: The receive queue associated with this 5-tuple filter.
 
-For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
+*   index: the index of this 5-tuple filter
+
+Example:
 
 .. code-block:: console
 
-    testpmd> set bonding mac 10 00:00:00:00:00:01
+    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
 
-set bonding xmit_balance_policy
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+remove_5tuple_filter
+~~~~~~~~~~~~~~~~~~~~
 
-Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
+Remove a 5-tuple filter
 
-set bonding xmit_balance_policy (port_id) (l2|l23|l34)
+remove_5tuple_filter (port_id) index (idx)
 
-For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
+get_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-.. code-block:: console
+Get and display a 5-tuple filter
 
-    testpmd> set bonding xmit_balance_policy 10 l34
+get_5tuple_filter (port_id) index (idx)
 
+Example:
 
-set bonding mon_period
-~~~~~~~~~~~~~~~~~~~~~~
+.. code-block:: console
 
-Set the link status monitoring polling period in milliseconds for a bonding devicie.
+    testpmd> get_5tuple_filter 1 index 0
 
-This adds support for PMD slave devices which do not support link status interrupts.
-When the mon_period is set to a value greater than 0 then all PMD's which do not support
-link status ISR will be queried every polling interval to check if their link status has changed.
+    filter[0]:
+        Destination IP: 0x02020205 mask: 1
+        Source IP: 0x02020204 mask: 1
+        Destination Port: 0x0040 mask: 1
+        Source Port: 0x0020 mask: 1
+        protocol: 0x06 mask: 1
+        priority: 3 flags: 0x00 queue: 3
 
-set bonding mon_period (port_id) (value)
+add_syn_filter
+~~~~~~~~~~~~~~
 
-For example, to set the link status monitoring polling period of bonded device (port 5) to 150ms
+Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
 
-.. code-block:: console
+add_syn_filter (port_id) priority (high|low) queue (queue_id)
 
-    testpmd> set bonding mon_period 5 150
+The available information parameters are:
 
+*   port_id: the port which the SYN filter assigned on.
 
-show bonding config
-~~~~~~~~~~~~~~~~~~~
+*   high: this SYN filter has higher priority than other filters.
 
-Show the current configuration of a Link Bonding device:
+*   low: this SYN filter has lower priority than other filters.
 
-show bonding config (port id)
+*   queue_id: The receive queue associated with this SYN filter
 
-For example,
-to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
-in balance mode with a transmission policy of layer 2+3.
+Example:
 
 .. code-block:: console
 
-    testpmd> show bonding config 9
-        Bonding mode: 2
-        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
-        Slaves (3): [1 3 4]
-        Active Slaves (3): [1 3 4]
-        Primary: [3]
+    testpmd> add_syn_filter 0 priority high queue 3,
 
-Register Functions
-------------------
+remove_syn_filter
+~~~~~~~~~~~~~~~~~
 
-The Register functions can be used to read from and write to registers on the network card referenced by a port number.
-This is mainly useful for debugging purposes.
-Reference should be made to the appropriate datasheet for the network card for details on the register addresses
-and fields that can be accessed.
+Remove SYN filter
 
-read reg
-~~~~~~~~
+remove_syn_filter (port_id)
 
-Display the value of a port register:
+get_syn_filter
+~~~~~~~~~~~~~~
 
-read reg (port_id) (address)
+Get and display SYN filter
 
-For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
+get_syn_filter (port_id)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> read reg 0 0xEE00
-    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
+    testpmd> get_syn_filter 0
 
-read regfield
-~~~~~~~~~~~~~
+    syn filter: on, priority: high, queue: 3
 
-Display a port register bit field:
+add_flex_filter
+~~~~~~~~~~~~~~~
 
-read regfield (port_id) (address) (bit_x) (bit_y)
+Add a Flex filter,
+which recognizes any arbitrary pattern within the first 128 bytes of the packet
+and routes packets into one of the receive queues.
 
-For example, reading the lowest two bits from the register in the example above:
+add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
+priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> read regfield 0 0xEE00 0 1
-    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
+*   port_id: the port which the Flex filter assigned on.
 
-read regbit
-~~~~~~~~~~~
+*   len_value: filter length in byte, no greater than 128.
 
-Display a single port register bit:
+*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
 
-read regbit (port_id) (address) (bit_x)
+*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
 
-For example, reading the lowest bit from the register in the example above:
+*   prio_value: the priority of this filter.
 
-.. code-block:: console
+*   queue_id: The receive queue associated with this Flex filter.
 
-    testpmd> read regbit 0 0xEE00 0
-    port 0 PCI register at offset 0xEE00: bit 0=1
+*   index: the index of this Flex filter
 
-write reg
-~~~~~~~~~
+Example:
 
-Set the value of a port register:
+.. code-block:: console
 
-write reg (port_id) (address) (value)
+   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
 
-For example, to clear a register:
+Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
 
-.. code-block:: console
+remove_flex_filter
+~~~~~~~~~~~~~~~~~~
 
-    testpmd> write reg 0 0xEE00 0x0
-    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
+Remove a Flex filter
 
-write regfield
-~~~~~~~~~~~~~~
+remove_flex_filter (port_id) index (idx)
 
-Set bit field of a port register:
+get_flex_filter
+~~~~~~~~~~~~~~~
 
-write regfield (port_id) (address) (bit_x) (bit_y) (value)
+Get and display a Flex filter
 
-For example, writing to the register cleared in the example above:
+get_flex_filter (port_id) index (idx)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> write regfield 0 0xEE00 0 1 2
-    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
+    testpmd> get_flex_filter 0 index 0
 
-write regbit
-~~~~~~~~~~~~
+    filter[0]:
 
-Set single bit value of a port register:
+        length: 16
 
-write regbit (port_id) (address) (bit_x) (value)
+        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000
 
-For example, to set the high bit in the register from the example above:
+        mask[]:
+    0b0000000000001100000000000000000000000000000000000000000000000000000000
+    0000000000000000000000000000000000000000000000000000000000
 
-.. code-block:: console
+        priority: 3   queue: 3
 
-    testpmd> write regbit 0 0xEE00 31 1
-    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v3 4/4] doc: Various document fixes in testpmd UG
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
                       ` (2 preceding siblings ...)
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
@ 2014-11-27 16:49     ` Pablo de Lara
  2014-11-27 16:52     ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management De Lara Guarch, Pablo
  2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  5 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 16:49 UTC (permalink / raw)
  To: dev

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 84b7bc3..bbc24a3 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -162,10 +162,12 @@ size is used to indicate the hardware supported reta size
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
-Display the RSS hash functions and RSS hash key of port (port_id).
+Display the RSS hash functions and RSS hash key of a port:
 
-show port (port_id) rss-hash [key] clear port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+show port (port_id) rss-hash [key]
+
+clear port
+~~~~~~~~~~
 
 Clear the port statistics for a given port or for all ports:
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
                       ` (3 preceding siblings ...)
  2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
@ 2014-11-27 16:52     ` De Lara Guarch, Pablo
  2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  5 siblings, 0 replies; 42+ messages in thread
From: De Lara Guarch, Pablo @ 2014-11-27 16:52 UTC (permalink / raw)
  To: dev

Self-NACK, title is incorrect

> -----Original Message-----
> From: De Lara Guarch, Pablo
> Sent: Thursday, November 27, 2014 4:49 PM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo
> Subject: [PATCH v3 0/4] new sample app UG for VM power management
> 
> TestPMD app has been added new commands, which should be reflected
> in the user guide. Also, this patchset fixes several typos and
> changes the location of the description of some commands.
> 
> Changes in v3:
> 
> Added new missing existing command "show port rss reta"
> Added new commands from TSO support patchset
> Modified info for command "tx_cksum set" command
> 
> Changes in v2:
> 
> Title underline in added commands was too short.
> 
> Pablo de Lara (4):
>   doc: Added new commands in testpmd UG
>   doc: Corrected info for tx_checksum set mask function, in testpmd UG
>   doc: Moved commands in testpmd UG to match testpmd command help
> order
>   doc: Various document fixes in testpmd UG
> 
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1128 ++++++++++++++--
> -----------
>  1 files changed, 605 insertions(+), 523 deletions(-)
> 
> --
> 1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app
  2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
                       ` (4 preceding siblings ...)
  2014-11-27 16:52     ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management De Lara Guarch, Pablo
@ 2014-11-27 19:47     ` Pablo de Lara
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 1/4] doc: Added new commands in testpmd UG Pablo de Lara
                         ` (4 more replies)
  5 siblings, 5 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 19:47 UTC (permalink / raw)
  To: dev

TestPMD app has been added new commands, which should be reflected
in the user guide. Also, this patchset fixes several typos and
changes the location of the description of some commands.

Changes in v4:

Fixed wrong patchset title

Changes in v3:

Added new missing existing command "show port rss reta"
Added new commands from TSO support patchset
Modified info for command "tx_cksum set" command

Changes in v2:

Title underline in added commands was too short.

Pablo de Lara (4):
  doc: Added new commands in testpmd UG
  doc: Corrected info for tx_checksum set mask function, in testpmd UG
  doc: Moved commands in testpmd UG to match testpmd command help order
  doc: Various document fixes in testpmd UG

 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1128 ++++++++++++++-------------
 1 files changed, 605 insertions(+), 523 deletions(-)

-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v4 1/4] doc: Added new commands in testpmd UG
  2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
@ 2014-11-27 19:47       ` Pablo de Lara
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
                         ` (3 subsequent siblings)
  4 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 19:47 UTC (permalink / raw)
  To: dev

Added info in testpmd functions section for the following commands:

- tunnel_filter add
- tunnel_filter rm
- rx_vxlan_port add
- rx_vxlan_port rm
- port stop/start queue
- set port mac address filter (for VF)
- tx_checksum set
- tso set
- tso show

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   79 +++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 5e62ff9..c010577 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -150,6 +150,15 @@ For example:
         filter on
         qinq(extend) off
 
+show port rss reta
+~~~~~~~~~~~~~~~~~~
+
+Display the rss redirection table entry indicated by masks on port X:
+
+show port (port_id) rss reta (size) (mask0, mask1...)
+
+size is used to indicate the hardware supported reta size
+
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
@@ -456,6 +465,36 @@ Set the outer VLAN TPID for packet filtering on a port:
 
 rx_vlan set tpid (value) (port_id)
 
+tunnel_filter add
+~~~~~~~~~~~~~~~~~
+
+Add a tunnel filter on a port:
+
+tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+tunnel_filter remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove a tunnel filter on a port:
+
+tunnel_filter rm (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+rx_vxlan_port add
+~~~~~~~~~~~~~~~~~
+
+Add an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port add (udp_port) (port_id)
+
+rx_vxlan_port remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port rm (udp_port) (port_id)
+
 tx_vlan set
 ~~~~~~~~~~~
 
@@ -498,6 +537,29 @@ bit 3 - if set insert sctp checksum offload
 
     Check the NIC Datasheet for hardware limits.
 
+tx_checksum show
+~~~~~~~~~~~~~~~~
+
+Display tx checksum offload configuration:
+
+tx_checksum show (port_id)
+
+tso set
+~~~~~~~
+
+Enable TCP Segmentation Offload in csum forward engine:
+
+tso set (segsize) (port_id)
+
+.. note::
+   Please check the NIC datasheet for HW limits
+
+tso show
+~~~~~~~~
+
+Display the status of TCP Segmentation Offload:
+
+tso show (port_id)
 
 set fwd
 ~~~~~~~
@@ -635,6 +697,14 @@ Set VF receive/transmit from a port:
 
 set port (port_id) vf (vf_id) (rx|tx) (on|off)
 
+set port - mac address filter (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add/Remove unicast or multicast MAC addr filter for a VF:
+
+set port (port_id) vf (vf_id) (mac_addr)
+ (exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) (on|off)
+
 set port - rx mode(for VF)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1061,6 +1131,15 @@ Close all ports or a specific port:
 
 port close (port_id|all)
 
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
+
+Start/stop a rx/tx queue on a specific port:
+
+port (port_id) (rxq|txq) (queue_id) (start|stop)
+
+Only take effect when port is started.
+
 port config - speed
 ~~~~~~~~~~~~~~~~~~~
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v4 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 1/4] doc: Added new commands in testpmd UG Pablo de Lara
@ 2014-11-27 19:47       ` Pablo de Lara
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
                         ` (2 subsequent siblings)
  4 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 19:47 UTC (permalink / raw)
  To: dev

tx_checksum set function does not use bitmask anymore, but strings

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   21 ++++++++-------------
 1 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c010577..975929e 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -516,22 +516,17 @@ Disable hardware insertion of a VLAN header in packets sent on a port:
 
 tx_vlan reset (port_id)
 
-tx_checksum set mask
-~~~~~~~~~~~~~~~~~~~~
-
-Enable hardware insertion of checksum offload with a 4-bit mask, 0x0 - 0xF, in packets sent on a port:
-
-tx_checksum set (mask) (port_id)
-
-The bits in the mask are:
-
-bit 0 - if set insert ip checksum offload
+tx_checksum set
+~~~~~~~~~~~~~~~
 
-bit 1 - if set insert udp checksum offload
+Select hardware or software calculation of the checksum when
+transmitting a packet using the csum forward engine:
 
-bit 2 - if set insert tcp checksum offload
+tx_cksum set (ip|udp|tcp|sctp|vxlan)
 
-bit 3 - if set insert sctp checksum offload
+ip|udp|tcp|sctp always concern the inner layer.
+vxlan concerns the outer IP and UDP layer (in case the packet
+is recognized as a vxlan packet by the forward engine)
 
 .. note::
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v4 3/4] doc: Moved commands in testpmd UG to match testpmd command help order
  2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 1/4] doc: Added new commands in testpmd UG Pablo de Lara
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
@ 2014-11-27 19:47       ` Pablo de Lara
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
  2014-12-01 11:40       ` [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  4 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 19:47 UTC (permalink / raw)
  To: dev

Moved commands in testpmd UG to set queue rates
to match order in testpmd command help.

Created new section "Filters" to match that
same section in testpmd UG, and moved all
commands related to it there.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1042 ++++++++++++++-------------
 1 files changed, 524 insertions(+), 518 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 975929e..84b7bc3 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -444,20 +444,6 @@ Remove a VLAN ID, from the set of VLAN identifiers filtered for VF(s) for port I
 
 rx_vlan rm (vlan_id) port (port_id) vf (vf_mask)
 
-tx_rate (for Queue)
-~~~~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queue of a port ID:
-
-set port (port_id) queue (queue_id) rate (rate_value)
-
-tx_rate (for VF)
-~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queues in VF of a port ID:
-
-set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
-
 rx_vlan set tpid
 ~~~~~~~~~~~~~~~~
 
@@ -717,6 +703,20 @@ The available receive modes are:
 
 *  MPE: accepts all multicast packets
 
+set port - tx_rate (for Queue)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queue of a port ID:
+
+set port (port_id) queue (queue_id) rate (rate_value)
+
+set port - tx_rate (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queues in VF of a port ID:
+
+set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
+
 set port - mirror rule
 ~~~~~~~~~~~~~~~~~~~~~~
 
@@ -783,903 +783,909 @@ Show the bypass configuration for a bypass enabled NIC using the lowest port on
 
 show bypass config (port_id)
 
-add_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+set link up
+~~~~~~~~~~~
 
-Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
+Set link up for a port.
 
-add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
+set link-up port (port id)
 
-The available information parameters are:
+set link down
+~~~~~~~~~~~~~
 
-*   port_id:  the port which the Ethertype filter assigned on.
+Set link down for a port.
 
-*   eth_value: the EtherType value want to match,
-    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
+set link-down port (port id)
 
-*   enable: user priority participates in the match.
+Port Functions
+--------------
 
-*   disable: user priority doesn't participate in the match.
+The following sections show functions for configuring ports.
 
-*   pri_value: user priority value that want to match.
+.. note::
 
-*   queue_id : The receive queue associated with this EtherType filter
+    Port configuration changes only become active when forwarding is started/restarted.
 
-*   index: the index of this EtherType filter
+port start
+~~~~~~~~~~
 
-Example:
+Start all ports or a specific port:
 
-.. code-block:: console
+port start (port_id|all)
 
-    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
-    Assign ARP packet to receive queue 3
+port stop
+~~~~~~~~~
 
-remove_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~~~~
+Stop all ports or a specific port:
 
-Remove a L2 Ethertype filter
+port stop (port_id|all)
 
-remove_ethertype_filter (port_id) index (idx)
+port close
+~~~~~~~~~~
 
-get_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+Close all ports or a specific port:
 
-Get and display a L2 Ethertype filter
+port close (port_id|all)
 
-get_ethertype_filter (port_id) index (idx)
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
 
-Example:
+Start/stop a rx/tx queue on a specific port:
 
-.. code-block:: console
+port (port_id) (rxq|txq) (queue_id) (start|stop)
 
-    testpmd> get_ethertype_filter 0 index 0
+Only take effect when port is started.
 
-    filter[0]:
-        ethertype: 0x0806
-        priority: disable, 0
-        queue: 3
+port config - speed
+~~~~~~~~~~~~~~~~~~~
 
-add_2tuple_filter
-~~~~~~~~~~~~~~~~~
+Set the speed and duplex mode for all ports or a specific port:
 
-Add a 2-tuple filter,
-which identify packets by specific protocol and destination TCP/UDP port
-and forwards packets into one of the receive queues.
+port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
 
-add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
-flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
+port config - queues/descriptors
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The available information parameters are:
+Set number of queues/descriptors for rxq, txq, rxd and txd:
 
-*   port_id: the port which the 2-tuple filter assigned on.
+port config all (rxq|txq|rxd|txd) (value)
 
-*   pro_value: IP L4 protocol
+This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
 
-*   pro_mask: protocol participates in the match or not, 1 means participate
+port config - max-pkt-len
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   port_value: destination port in L4.
+Set the maximum packet length:
 
-*   port_mask: destination port participates in the match or not, 1 means participate.
+port config all max-pkt-len (value)
 
-*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
+This is equivalent to the --max-pkt-len command-line option.
 
-*   prio_value: the priority of this filter.
+port config - CRC Strip
+~~~~~~~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 2-tuple filter
+Set hardware CRC stripping on or off for all ports:
 
-*   index: the index of this 2-tuple filter
+port config all crc-strip (on|off)
 
-Example:
+CRC stripping is off by default.
 
-.. code-block:: console
+The on option is equivalent to the --crc-strip command-line option.
 
-    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
+port config - RX Checksum
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-remove_2tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+Set hardware RX checksum offload to on or off for all ports:
 
-Remove a 2-tuple filter
+port config all rx-cksum (on|off)
 
-remove_2tuple_filter (port_id) index (idx)
+Checksum offload is off by default.
 
-get_2tuple_filter
-~~~~~~~~~~~~~~~~~
+The on option is equivalent to the --enable-rx-cksum command-line option.
 
-Get and display a 2-tuple filter
+port config - VLAN
+~~~~~~~~~~~~~~~~~~
 
-get_2tuple_filter (port_id) index (idx)
+Set hardware VLAN on or off for all ports:
 
-Example:
+port config all hw-vlan (on|off)
 
-.. code-block:: console
+Hardware VLAN is on by default.
 
-    testpmd> get_2tuple_filter 0 index 0
+The off option is equivalent to the --disable-hw-vlan command-line option.
 
-    filter[0]:
-        Destination Port: 0x0020 mask: 1
-        protocol: 0x06 mask:1 tcp_flags: 0x02
-        priority: 3   queue: 3
+port config - Drop Packets
+~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-add_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set packet drop for packets with no descriptors on or off for all ports:
 
-Add a 5-tuple filter,
-which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
-and routes packets into one of the receive queues.
+port config all drop-en (on|off)
 
-add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
-protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
+Packet dropping for packets with no descriptors is off by default.
 
-The available information parameters are:
+The on option is equivalent to the --enable-drop-en command-line option.
 
-*   port_id: the port which the 5-tuple filter assigned on.
+port config - RSS
+~~~~~~~~~~~~~~~~~
 
-*   dst_address: destination IP address.
+Set the RSS (Receive Side Scaling) mode on or off:
 
-*   src_address: source IP address.
+port config all rss (ip|udp|none)
 
-*   dst_port_value: TCP/UDP destination port.
+RSS is on by default.
 
-*   src_port_value: TCP/UDP source port.
+The off option is equivalent to the --disable-rss command-line option.
 
-*   protocol_value: L4 protocol.
+port config - RSS Reta
+~~~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: participates in the match or not by bit for field above, 1b means participate
+Set the RSS (Receive Side Scaling) redirection table:
 
-*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
+port config all rss reta (hash,queue)[,(hash,queue)]
 
-*   prio_value: the priority of this filter.
+port config - DCB
+~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 5-tuple filter.
+Set the DCB mode for an individual port:
 
-*   index: the index of this 5-tuple filter
+port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
 
-Example:
+The traffic class should be 4 or 8.
 
-.. code-block:: console
+port config - Burst
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
+Set the number of packets per burst:
 
-remove_5tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+port config all burst (value)
 
-Remove a 5-tuple filter
+This is equivalent to the --burst command-line option.
 
-remove_5tuple_filter (port_id) index (idx)
+port config - Threshold
+~~~~~~~~~~~~~~~~~~~~~~~
 
-get_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set thresholds for TX/RX queues:
 
-Get and display a 5-tuple filter
+port config all (threshold) (value)
 
-get_5tuple_filter (port_id) index (idx)
+Where the threshold type can be:
 
-Example:
+*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
 
-.. code-block:: console
+*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
 
-    testpmd> get_5tuple_filter 1 index 0
+*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
 
-    filter[0]:
-        Destination IP: 0x02020205 mask: 1
-        Source IP: 0x02020204 mask: 1
-        Destination Port: 0x0040 mask: 1
-        Source Port: 0x0020 mask: 1
-        protocol: 0x06 mask: 1
-        priority: 3 flags: 0x00 queue: 3
+*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter
-~~~~~~~~~~~~~~
+*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
 
-Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
+*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter (port_id) priority (high|low) queue (queue_id)
+*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
 
-The available information parameters are:
+*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
 
-*   port_id: the port which the SYN filter assigned on.
+*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
+    These threshold options are also available from the command-line.
 
-*   high: this SYN filter has higher priority than other filters.
+Flow Director Functions
+-----------------------
 
-*   low: this SYN filter has lower priority than other filters.
+The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
 
-*   queue_id: The receive queue associated with this SYN filter
+Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
 
-Example:
+*   Perfect match filters.
+    The hardware checks a match between the masked fields of the received packets and the programmed filters.
 
-.. code-block:: console
+*   Signature filters.
+    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
 
-    testpmd> add_syn_filter 0 priority high queue 3,
+The Flow Director filters can match the following fields in a packet:
 
-remove_syn_filter
-~~~~~~~~~~~~~~~~~
+*   Source IP and destination IP addresses.
 
-Remove SYN filter
+*   Source port and destination port numbers (for UDP and TCP packets).
 
-remove_syn_filter (port_id)
+*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
 
-get_syn_filter
-~~~~~~~~~~~~~~
+*   VLAN header.
 
-Get and display SYN filter
+*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
 
-get_syn_filter (port_id)
+The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
+or parts of the fields.
+For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
 
-Example:
+In the following sections, several common parameters are used in the Flow Director filters.
+These are explained below:
 
-.. code-block:: console
+*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
 
-    testpmd> get_syn_filter 0
+    src 192.168.0.1 1024
 
-    syn filter: on, priority: high, queue: 3
+    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
 
-add_flex_filter
-~~~~~~~~~~~~~~~
+*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
 
-Add a Flex filter,
-which recognizes any arbitrary pattern within the first 128 bytes of the packet
-and routes packets into one of the receive queues.
+*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
 
-add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
-priority (prio_value) queue (queue_id) index (idx)
+The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
+and is counted from the first byte of the destination Ethernet MAC address.
+The default offset is 0xC bytes, which is the "Type" word in the MAC header.
+Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
+These values change when a VLAN tag is added.
 
-The available information parameters are:
+*   vlan: The VLAN header to match in the packet.
 
-*   port_id: the port which the Flex filter assigned on.
+*   queue: The index of the RX queue to route matched packets to.
 
-*   len_value: filter length in byte, no greater than 128.
+*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
 
-*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
+add_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
+Add a signature filter:
 
-*   prio_value: the priority of this filter.
+# Command is displayed on several lines for clarity.
 
-*   queue_id: The receive queue associated with this Flex filter.
+add_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-*   index: the index of this Flex filter
+    src (src_ip_address) (src_port)
 
-Example:
+    dst (dst_ip_address) (dst_port)
 
-.. code-block:: console
+    flexbytes (flexbytes_values)
 
-   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
+    vlan (vlan_id) queue (queue_id)
 
-Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
+upd_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-remove_flex_filter
-~~~~~~~~~~~~~~~~~~
+Update a signature filter:
 
-Remove a Flex filter
+# Command is displayed on several lines for clarity.
 
-remove_flex_filter (port_id) index (idx)
+upd_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-get_flex_filter
-~~~~~~~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Get and display a Flex filter
+    dst (dst_ip_address) (dst_port)
 
-get_flex_filter (port_id) index (idx)
+    flexbytes (flexbytes_values)
 
-Example:
+    vlan (vlan_id) queue (queue_id)
 
-.. code-block:: console
+rm_signature_filter
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> get_flex_filter 0 index 0
+Remove a signature filter:
 
-    filter[0]:
+# Command is displayed on several lines for clarity.
 
-        length: 16
+rm_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    src (src_ip_address) (src_port)
 
-        mask[]:
-    0b0000000000001100000000000000000000000000000000000000000000000000000000
-    0000000000000000000000000000000000000000000000000000000000
+    dst (dst_ip_address) (dst_port)
 
-        priority: 3   queue: 3
+    flexbytes (flexbytes_values)
 
-set link up
-~~~~~~~~~~~
+    vlan (vlan_id)
 
-Set link up for a port.
+add_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-set link-up port (port id)
+Add a perfect filter:
 
-set link down
-~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set link down for a port.
+add_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-set link-down port (port id)
+    src (src_ip_address) (src_port)
 
-Port Functions
---------------
+    dst (dst_ip_address) (dst_port)
 
-The following sections show functions for configuring ports.
+    flexbytes (flexbytes_values)
 
-.. note::
+    vlan (vlan_id) queue (queue_id) soft (soft_id)
 
-    Port configuration changes only become active when forwarding is started/restarted.
+upd_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-port start
-~~~~~~~~~~
+Update a perfect filter:
 
-Start all ports or a specific port:
+# Command is displayed on several lines for clarity.
 
-port start (port_id|all)
+upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-port stop
-~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Stop all ports or a specific port:
+    dst (dst_ip_address) (dst_port)
 
-port stop (port_id|all)
+    flexbytes (flexbytes_values)
 
-port close
-~~~~~~~~~~
+    vlan (vlan_id) queue (queue_id)
 
-Close all ports or a specific port:
+rm_perfect_filter
+~~~~~~~~~~~~~~~~~
 
-port close (port_id|all)
+Remove a perfect filter:
 
-port start/stop queue
-~~~~~~~~~~~~~~~~~~~~~
+rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-Start/stop a rx/tx queue on a specific port:
+    src (src_ip_address) (src_port)
 
-port (port_id) (rxq|txq) (queue_id) (start|stop)
+    dst (dst_ip_address) (dst_port)
 
-Only take effect when port is started.
+    flexbytes (flexbytes_values)
 
-port config - speed
-~~~~~~~~~~~~~~~~~~~
+    vlan (vlan_id) soft (soft_id)
 
-Set the speed and duplex mode for all ports or a specific port:
+set_masks_filter
+~~~~~~~~~~~~~~~~
 
-port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
+Set IPv4 filter masks:
 
-port config - queues/descriptors
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set number of queues/descriptors for rxq, txq, rxd and txd:
+set_masks_filter (port_id) only_ip_flow (0|1)
 
-port config all (rxq|txq|rxd|txd) (value)
+    src_mask (ip_src_mask) (src_port_mask)
 
-This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-port config - max-pkt-len
-~~~~~~~~~~~~~~~~~~~~~~~~~
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-Set the maximum packet length:
+set_ipv6_masks_filter
+~~~~~~~~~~~~~~~~~~~~~
 
-port config all max-pkt-len (value)
+Set IPv6 filter masks:
 
-This is equivalent to the --max-pkt-len command-line option.
+# Command is displayed on several lines for clarity.
 
-port config - CRC Strip
-~~~~~~~~~~~~~~~~~~~~~~~
+set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
 
-Set hardware CRC stripping on or off for all ports:
+    src_mask (ip_src_mask) (src_port_mask)
 
-port config all crc-strip (on|off)
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-CRC stripping is off by default.
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-The on option is equivalent to the --crc-strip command-line option.
+    compare_dst (0|1)
 
-port config - RX Checksum
-~~~~~~~~~~~~~~~~~~~~~~~~~
+Link Bonding Functions
+----------------------
 
-Set hardware RX checksum offload to on or off for all ports:
+The Link Bonding functions make it possible to dynamically create and
+manage link bonding devices from within testpmd interactive prompt.
 
-port config all rx-cksum (on|off)
+create bonded device
+~~~~~~~~~~~~~~~~~~~~
 
-Checksum offload is off by default.
+Create a new bonding device:
 
-The on option is equivalent to the --enable-rx-cksum command-line option.
+create bonded device (mode) (socket)
 
-port config - VLAN
-~~~~~~~~~~~~~~~~~~
+For example, to create a bonded device in mode 1 on socket 0.
 
-Set hardware VLAN on or off for all ports:
+.. code-block:: console
 
-port config all hw-vlan (on|off)
+    testpmd> create bonded 1 0
+    created new bonded device (port X)
 
-Hardware VLAN is on by default.
+add bonding slave
+~~~~~~~~~~~~~~~~~
 
-The off option is equivalent to the --disable-hw-vlan command-line option.
+Adds Ethernet device to a Link Bonding device:
 
-port config - Drop Packets
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+add bonding slave (slave id) (port id)
 
-Set packet drop for packets with no descriptors on or off for all ports:
+For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
 
-port config all drop-en (on|off)
+.. code-block:: console
 
-Packet dropping for packets with no descriptors is off by default.
+    testpmd> add bonding slave 6 10
 
-The on option is equivalent to the --enable-drop-en command-line option.
 
-port config - RSS
-~~~~~~~~~~~~~~~~~
+remove bonding slave
+~~~~~~~~~~~~~~~~~~~~
 
-Set the RSS (Receive Side Scaling) mode on or off:
+Removes an Ethernet slave device from a Link Bonding device:
 
-port config all rss (ip|udp|none)
+remove bonding slave (slave id) (port id)
 
-RSS is on by default.
+For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
 
-The off option is equivalent to the --disable-rss command-line option.
+.. code-block:: console
 
-port config - RSS Reta
-~~~~~~~~~~~~~~~~~~~~~~
+    testpmd> remove bonding slave 6 10
 
-Set the RSS (Receive Side Scaling) redirection table:
+set bonding mode
+~~~~~~~~~~~~~~~~
 
-port config all rss reta (hash,queue)[,(hash,queue)]
+Set the Link Bonding mode of a Link Bonding device:
 
-port config - DCB
-~~~~~~~~~~~~~~~~~
+set bonding mode (value) (port id)
 
-Set the DCB mode for an individual port:
+For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
 
-port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
+.. code-block:: console
 
-The traffic class should be 4 or 8.
+    testpmd> set bonding mode 3 10
 
-port config - Burst
+set bonding primary
 ~~~~~~~~~~~~~~~~~~~
 
-Set the number of packets per burst:
-
-port config all burst (value)
-
-This is equivalent to the --burst command-line option.
-
-port config - Threshold
-~~~~~~~~~~~~~~~~~~~~~~~
+Set an Ethernet slave device as the primary device on a Link Bonding device:
 
-Set thresholds for TX/RX queues:
+set bonding primary (slave id) (port id)
 
-port config all (threshold) (value)
+For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
 
-Where the threshold type can be:
+.. code-block:: console
 
-*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
+    testpmd> set bonding primary 6 10
 
-*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac
+~~~~~~~~~~~~~~~
 
-*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
+Set the MAC address of a Link Bonding device:
 
-*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
+set bonding mac (port id) (mac)
 
-*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
+For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
 
-*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
+.. code-block:: console
 
-*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
+    testpmd> set bonding mac 10 00:00:00:00:00:01
 
-*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
+set bonding xmit_balance_policy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
-    These threshold options are also available from the command-line.
+Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
 
-Flow Director Functions
------------------------
+set bonding xmit_balance_policy (port_id) (l2|l23|l34)
 
-The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
+For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
 
-Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
+.. code-block:: console
 
-*   Perfect match filters.
-    The hardware checks a match between the masked fields of the received packets and the programmed filters.
+    testpmd> set bonding xmit_balance_policy 10 l34
 
-*   Signature filters.
-    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
 
-The Flow Director filters can match the following fields in a packet:
+set bonding mon_period
+~~~~~~~~~~~~~~~~~~~~~~
 
-*   Source IP and destination IP addresses.
+Set the link status monitoring polling period in milliseconds for a bonding devicie.
 
-*   Source port and destination port numbers (for UDP and TCP packets).
+This adds support for PMD slave devices which do not support link status interrupts.
+When the mon_period is set to a value greater than 0 then all PMD's which do not support
+link status ISR will be queried every polling interval to check if their link status has changed.
 
-*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
+set bonding mon_period (port_id) (value)
 
-*   VLAN header.
+For example, to set the link status monitoring polling period of bonded device (port 5) to 150ms
 
-*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
+.. code-block:: console
 
-The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
-or parts of the fields.
-For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
+    testpmd> set bonding mon_period 5 150
 
-In the following sections, several common parameters are used in the Flow Director filters.
-These are explained below:
 
-*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
+show bonding config
+~~~~~~~~~~~~~~~~~~~
 
-    src 192.168.0.1 1024
+Show the current configuration of a Link Bonding device:
 
-    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
+show bonding config (port id)
 
-*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
+For example,
+to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
+in balance mode with a transmission policy of layer 2+3.
 
-*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
+.. code-block:: console
 
-The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
-and is counted from the first byte of the destination Ethernet MAC address.
-The default offset is 0xC bytes, which is the "Type" word in the MAC header.
-Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
-These values change when a VLAN tag is added.
+    testpmd> show bonding config 9
+        Bonding mode: 2
+        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
+        Slaves (3): [1 3 4]
+        Active Slaves (3): [1 3 4]
+        Primary: [3]
 
-*   vlan: The VLAN header to match in the packet.
+Register Functions
+------------------
 
-*   queue: The index of the RX queue to route matched packets to.
+The Register functions can be used to read from and write to registers on the network card referenced by a port number.
+This is mainly useful for debugging purposes.
+Reference should be made to the appropriate datasheet for the network card for details on the register addresses
+and fields that can be accessed.
 
-*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
+read reg
+~~~~~~~~
 
-add_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+Display the value of a port register:
 
-Add a signature filter:
+read reg (port_id) (address)
 
-# Command is displayed on several lines for clarity.
+For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
 
-add_signature_filter (port_id) (ip|udp|tcp|sctp)
+.. code-block:: console
 
-    src (src_ip_address) (src_port)
+    testpmd> read reg 0 0xEE00
+    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
 
-    dst (dst_ip_address) (dst_port)
+read regfield
+~~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Display a port register bit field:
 
-    vlan (vlan_id) queue (queue_id)
+read regfield (port_id) (address) (bit_x) (bit_y)
 
-upd_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+For example, reading the lowest two bits from the register in the example above:
 
-Update a signature filter:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> read regfield 0 0xEE00 0 1
+    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
 
-upd_signature_filter (port_id) (ip|udp|tcp|sctp)
+read regbit
+~~~~~~~~~~~
 
-    src (src_ip_address) (src_port)
+Display a single port register bit:
 
-    dst (dst_ip_address) (dst_port)
+read regbit (port_id) (address) (bit_x)
 
-    flexbytes (flexbytes_values)
+For example, reading the lowest bit from the register in the example above:
 
-    vlan (vlan_id) queue (queue_id)
+.. code-block:: console
 
-rm_signature_filter
-~~~~~~~~~~~~~~~~~~~
+    testpmd> read regbit 0 0xEE00 0
+    port 0 PCI register at offset 0xEE00: bit 0=1
 
-Remove a signature filter:
+write reg
+~~~~~~~~~
 
-# Command is displayed on several lines for clarity.
+Set the value of a port register:
 
-rm_signature_filter (port_id) (ip|udp|tcp|sctp)
+write reg (port_id) (address) (value)
 
-    src (src_ip_address) (src_port)
+For example, to clear a register:
 
-    dst (dst_ip_address) (dst_port)
+.. code-block:: console
 
-    flexbytes (flexbytes_values)
+    testpmd> write reg 0 0xEE00 0x0
+    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
 
-    vlan (vlan_id)
+write regfield
+~~~~~~~~~~~~~~
 
-add_perfect_filter
-~~~~~~~~~~~~~~~~~~
+Set bit field of a port register:
 
-Add a perfect filter:
+write regfield (port_id) (address) (bit_x) (bit_y) (value)
 
-# Command is displayed on several lines for clarity.
+For example, writing to the register cleared in the example above:
 
-add_perfect_filter (port_id) (ip|udp|tcp|sctp)
+.. code-block:: console
 
-    src (src_ip_address) (src_port)
+    testpmd> write regfield 0 0xEE00 0 1 2
+    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
 
-    dst (dst_ip_address) (dst_port)
+write regbit
+~~~~~~~~~~~~
 
-    flexbytes (flexbytes_values)
+Set single bit value of a port register:
 
-    vlan (vlan_id) queue (queue_id) soft (soft_id)
+write regbit (port_id) (address) (bit_x) (value)
 
-upd_perfect_filter
-~~~~~~~~~~~~~~~~~~
+For example, to set the high bit in the register from the example above:
 
-Update a perfect filter:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> write regbit 0 0xEE00 31 1
+    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
 
-upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
+Filter Functions
+----------------
+ 
+This section details the available filter functions that are available.
 
-    src (src_ip_address) (src_port)
+add_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-    dst (dst_ip_address) (dst_port)
+Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
 
-    flexbytes (flexbytes_values)
+add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
 
-    vlan (vlan_id) queue (queue_id)
+The available information parameters are:
 
-rm_perfect_filter
-~~~~~~~~~~~~~~~~~
+*   port_id:  the port which the Ethertype filter assigned on.
 
-Remove a perfect filter:
+*   eth_value: the EtherType value want to match,
+    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
 
-rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
+*   enable: user priority participates in the match.
 
-    src (src_ip_address) (src_port)
+*   disable: user priority doesn't participate in the match.
 
-    dst (dst_ip_address) (dst_port)
+*   pri_value: user priority value that want to match.
 
-    flexbytes (flexbytes_values)
+*   queue_id : The receive queue associated with this EtherType filter
 
-    vlan (vlan_id) soft (soft_id)
+*   index: the index of this EtherType filter
 
-set_masks_filter
-~~~~~~~~~~~~~~~~
+Example:
 
-Set IPv4 filter masks:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
+    Assign ARP packet to receive queue 3
 
-set_masks_filter (port_id) only_ip_flow (0|1)
+remove_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~~~~
 
-    src_mask (ip_src_mask) (src_port_mask)
+Remove a L2 Ethertype filter
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+remove_ethertype_filter (port_id) index (idx)
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+get_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-set_ipv6_masks_filter
-~~~~~~~~~~~~~~~~~~~~~
+Get and display a L2 Ethertype filter
 
-Set IPv6 filter masks:
+get_ethertype_filter (port_id) index (idx)
 
-# Command is displayed on several lines for clarity.
+Example:
 
-set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
+.. code-block:: console
 
-    src_mask (ip_src_mask) (src_port_mask)
+    testpmd> get_ethertype_filter 0 index 0
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+    filter[0]:
+        ethertype: 0x0806
+        priority: disable, 0
+        queue: 3
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+add_2tuple_filter
+~~~~~~~~~~~~~~~~~
 
-    compare_dst (0|1)
+Add a 2-tuple filter,
+which identify packets by specific protocol and destination TCP/UDP port
+and forwards packets into one of the receive queues.
 
-Link Bonding Functions
-----------------------
+add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
+flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
 
-The Link Bonding functions make it possible to dynamically create and
-manage link bonding devices from within testpmd interactive prompt.
+The available information parameters are:
 
-create bonded device
-~~~~~~~~~~~~~~~~~~~~
+*   port_id: the port which the 2-tuple filter assigned on.
 
-Create a new bonding device:
+*   pro_value: IP L4 protocol
 
-create bonded device (mode) (socket)
+*   pro_mask: protocol participates in the match or not, 1 means participate
 
-For example, to create a bonded device in mode 1 on socket 0.
+*   port_value: destination port in L4.
 
-.. code-block:: console
+*   port_mask: destination port participates in the match or not, 1 means participate.
 
-    testpmd> create bonded 1 0
-    created new bonded device (port X)
+*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
 
-add bonding slave
-~~~~~~~~~~~~~~~~~
+*   prio_value: the priority of this filter.
 
-Adds Ethernet device to a Link Bonding device:
+*   queue_id: The receive queue associated with this 2-tuple filter
 
-add bonding slave (slave id) (port id)
+*   index: the index of this 2-tuple filter
 
-For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
+Example:
 
 .. code-block:: console
 
-    testpmd> add bonding slave 6 10
-
+    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
 
-remove bonding slave
+remove_2tuple_filter
 ~~~~~~~~~~~~~~~~~~~~
 
-Removes an Ethernet slave device from a Link Bonding device:
+Remove a 2-tuple filter
 
-remove bonding slave (slave id) (port id)
+remove_2tuple_filter (port_id) index (idx)
 
-For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
+get_2tuple_filter
+~~~~~~~~~~~~~~~~~
+
+Get and display a 2-tuple filter
+
+get_2tuple_filter (port_id) index (idx)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> remove bonding slave 6 10
+    testpmd> get_2tuple_filter 0 index 0
 
-set bonding mode
-~~~~~~~~~~~~~~~~
+    filter[0]:
+        Destination Port: 0x0020 mask: 1
+        protocol: 0x06 mask:1 tcp_flags: 0x02
+        priority: 3   queue: 3
 
-Set the Link Bonding mode of a Link Bonding device:
+add_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-set bonding mode (value) (port id)
+Add a 5-tuple filter,
+which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
+and routes packets into one of the receive queues.
 
-For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
+add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
+protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> set bonding mode 3 10
+*   port_id: the port which the 5-tuple filter assigned on.
 
-set bonding primary
-~~~~~~~~~~~~~~~~~~~
+*   dst_address: destination IP address.
 
-Set an Ethernet slave device as the primary device on a Link Bonding device:
+*   src_address: source IP address.
 
-set bonding primary (slave id) (port id)
+*   dst_port_value: TCP/UDP destination port.
 
-For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
+*   src_port_value: TCP/UDP source port.
 
-.. code-block:: console
+*   protocol_value: L4 protocol.
 
-    testpmd> set bonding primary 6 10
+*   mask_value: participates in the match or not by bit for field above, 1b means participate
 
-set bonding mac
-~~~~~~~~~~~~~~~
+*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
 
-Set the MAC address of a Link Bonding device:
+*   prio_value: the priority of this filter.
 
-set bonding mac (port id) (mac)
+*   queue_id: The receive queue associated with this 5-tuple filter.
 
-For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
+*   index: the index of this 5-tuple filter
+
+Example:
 
 .. code-block:: console
 
-    testpmd> set bonding mac 10 00:00:00:00:00:01
+    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
 
-set bonding xmit_balance_policy
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+remove_5tuple_filter
+~~~~~~~~~~~~~~~~~~~~
 
-Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
+Remove a 5-tuple filter
 
-set bonding xmit_balance_policy (port_id) (l2|l23|l34)
+remove_5tuple_filter (port_id) index (idx)
 
-For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
+get_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-.. code-block:: console
+Get and display a 5-tuple filter
 
-    testpmd> set bonding xmit_balance_policy 10 l34
+get_5tuple_filter (port_id) index (idx)
 
+Example:
 
-set bonding mon_period
-~~~~~~~~~~~~~~~~~~~~~~
+.. code-block:: console
 
-Set the link status monitoring polling period in milliseconds for a bonding devicie.
+    testpmd> get_5tuple_filter 1 index 0
 
-This adds support for PMD slave devices which do not support link status interrupts.
-When the mon_period is set to a value greater than 0 then all PMD's which do not support
-link status ISR will be queried every polling interval to check if their link status has changed.
+    filter[0]:
+        Destination IP: 0x02020205 mask: 1
+        Source IP: 0x02020204 mask: 1
+        Destination Port: 0x0040 mask: 1
+        Source Port: 0x0020 mask: 1
+        protocol: 0x06 mask: 1
+        priority: 3 flags: 0x00 queue: 3
 
-set bonding mon_period (port_id) (value)
+add_syn_filter
+~~~~~~~~~~~~~~
 
-For example, to set the link status monitoring polling period of bonded device (port 5) to 150ms
+Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
 
-.. code-block:: console
+add_syn_filter (port_id) priority (high|low) queue (queue_id)
 
-    testpmd> set bonding mon_period 5 150
+The available information parameters are:
 
+*   port_id: the port which the SYN filter assigned on.
 
-show bonding config
-~~~~~~~~~~~~~~~~~~~
+*   high: this SYN filter has higher priority than other filters.
 
-Show the current configuration of a Link Bonding device:
+*   low: this SYN filter has lower priority than other filters.
 
-show bonding config (port id)
+*   queue_id: The receive queue associated with this SYN filter
 
-For example,
-to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
-in balance mode with a transmission policy of layer 2+3.
+Example:
 
 .. code-block:: console
 
-    testpmd> show bonding config 9
-        Bonding mode: 2
-        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
-        Slaves (3): [1 3 4]
-        Active Slaves (3): [1 3 4]
-        Primary: [3]
+    testpmd> add_syn_filter 0 priority high queue 3,
 
-Register Functions
-------------------
+remove_syn_filter
+~~~~~~~~~~~~~~~~~
 
-The Register functions can be used to read from and write to registers on the network card referenced by a port number.
-This is mainly useful for debugging purposes.
-Reference should be made to the appropriate datasheet for the network card for details on the register addresses
-and fields that can be accessed.
+Remove SYN filter
 
-read reg
-~~~~~~~~
+remove_syn_filter (port_id)
 
-Display the value of a port register:
+get_syn_filter
+~~~~~~~~~~~~~~
 
-read reg (port_id) (address)
+Get and display SYN filter
 
-For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
+get_syn_filter (port_id)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> read reg 0 0xEE00
-    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
+    testpmd> get_syn_filter 0
 
-read regfield
-~~~~~~~~~~~~~
+    syn filter: on, priority: high, queue: 3
 
-Display a port register bit field:
+add_flex_filter
+~~~~~~~~~~~~~~~
 
-read regfield (port_id) (address) (bit_x) (bit_y)
+Add a Flex filter,
+which recognizes any arbitrary pattern within the first 128 bytes of the packet
+and routes packets into one of the receive queues.
 
-For example, reading the lowest two bits from the register in the example above:
+add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
+priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> read regfield 0 0xEE00 0 1
-    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
+*   port_id: the port which the Flex filter assigned on.
 
-read regbit
-~~~~~~~~~~~
+*   len_value: filter length in byte, no greater than 128.
 
-Display a single port register bit:
+*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
 
-read regbit (port_id) (address) (bit_x)
+*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
 
-For example, reading the lowest bit from the register in the example above:
+*   prio_value: the priority of this filter.
 
-.. code-block:: console
+*   queue_id: The receive queue associated with this Flex filter.
 
-    testpmd> read regbit 0 0xEE00 0
-    port 0 PCI register at offset 0xEE00: bit 0=1
+*   index: the index of this Flex filter
 
-write reg
-~~~~~~~~~
+Example:
 
-Set the value of a port register:
+.. code-block:: console
 
-write reg (port_id) (address) (value)
+   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
 
-For example, to clear a register:
+Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
 
-.. code-block:: console
+remove_flex_filter
+~~~~~~~~~~~~~~~~~~
 
-    testpmd> write reg 0 0xEE00 0x0
-    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
+Remove a Flex filter
 
-write regfield
-~~~~~~~~~~~~~~
+remove_flex_filter (port_id) index (idx)
 
-Set bit field of a port register:
+get_flex_filter
+~~~~~~~~~~~~~~~
 
-write regfield (port_id) (address) (bit_x) (bit_y) (value)
+Get and display a Flex filter
 
-For example, writing to the register cleared in the example above:
+get_flex_filter (port_id) index (idx)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> write regfield 0 0xEE00 0 1 2
-    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
+    testpmd> get_flex_filter 0 index 0
 
-write regbit
-~~~~~~~~~~~~
+    filter[0]:
 
-Set single bit value of a port register:
+        length: 16
 
-write regbit (port_id) (address) (bit_x) (value)
+        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000
 
-For example, to set the high bit in the register from the example above:
+        mask[]:
+    0b0000000000001100000000000000000000000000000000000000000000000000000000
+    0000000000000000000000000000000000000000000000000000000000
 
-.. code-block:: console
+        priority: 3   queue: 3
 
-    testpmd> write regbit 0 0xEE00 31 1
-    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v4 4/4] doc: Various document fixes in testpmd UG
  2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
                         ` (2 preceding siblings ...)
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
@ 2014-11-27 19:47       ` Pablo de Lara
  2014-12-01 11:40       ` [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  4 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-11-27 19:47 UTC (permalink / raw)
  To: dev

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 84b7bc3..bbc24a3 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -162,10 +162,12 @@ size is used to indicate the hardware supported reta size
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
-Display the RSS hash functions and RSS hash key of port (port_id).
+Display the RSS hash functions and RSS hash key of a port:
 
-show port (port_id) rss-hash [key] clear port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+show port (port_id) rss-hash [key]
+
+clear port
+~~~~~~~~~~
 
 Clear the port statistics for a given port or for all ports:
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app
  2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
                         ` (3 preceding siblings ...)
  2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
@ 2014-12-01 11:40       ` Pablo de Lara
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG Pablo de Lara
                           ` (3 more replies)
  4 siblings, 4 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-12-01 11:40 UTC (permalink / raw)
  To: dev

TestPMD app has been added new commands, which should be reflected
in the user guide. Also, this patchset fixes several typos and
changes the location of the description of some commands.

Changes in v5:

Removed trailing whitespaces

Changes in v4:

Fixed wrong patchset title

Changes in v3:

Added new missing existing command "show port rss reta"
Added new commands from TSO support patchset
Modified info for command "tx_cksum set" command

Changes in v2:

Title underline in added commands was too short.

Pablo de Lara (4):
  doc: Added new commands in testpmd UG
  doc: Corrected info for tx_checksum set mask function, in testpmd UG
  doc: Moved commands in testpmd UG to match testpmd command help order
  doc: Various document fixes in testpmd UG

 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1127 ++++++++++++++-------------
 1 files changed, 604 insertions(+), 523 deletions(-)

-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG
  2014-12-01 11:40       ` [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
@ 2014-12-01 11:40         ` Pablo de Lara
  2014-12-01 12:32           ` Iremonger, Bernard
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
                           ` (2 subsequent siblings)
  3 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-12-01 11:40 UTC (permalink / raw)
  To: dev

Added info in testpmd functions section for the following commands:

- tunnel_filter add
- tunnel_filter rm
- rx_vxlan_port add
- rx_vxlan_port rm
- port stop/start queue
- set port mac address filter (for VF)
- tx_checksum set
- tso set
- tso show

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   79 +++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 5e62ff9..c010577 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -150,6 +150,15 @@ For example:
         filter on
         qinq(extend) off
 
+show port rss reta
+~~~~~~~~~~~~~~~~~~
+
+Display the rss redirection table entry indicated by masks on port X:
+
+show port (port_id) rss reta (size) (mask0, mask1...)
+
+size is used to indicate the hardware supported reta size
+
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
@@ -456,6 +465,36 @@ Set the outer VLAN TPID for packet filtering on a port:
 
 rx_vlan set tpid (value) (port_id)
 
+tunnel_filter add
+~~~~~~~~~~~~~~~~~
+
+Add a tunnel filter on a port:
+
+tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+tunnel_filter remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove a tunnel filter on a port:
+
+tunnel_filter rm (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+rx_vxlan_port add
+~~~~~~~~~~~~~~~~~
+
+Add an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port add (udp_port) (port_id)
+
+rx_vxlan_port remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port rm (udp_port) (port_id)
+
 tx_vlan set
 ~~~~~~~~~~~
 
@@ -498,6 +537,29 @@ bit 3 - if set insert sctp checksum offload
 
     Check the NIC Datasheet for hardware limits.
 
+tx_checksum show
+~~~~~~~~~~~~~~~~
+
+Display tx checksum offload configuration:
+
+tx_checksum show (port_id)
+
+tso set
+~~~~~~~
+
+Enable TCP Segmentation Offload in csum forward engine:
+
+tso set (segsize) (port_id)
+
+.. note::
+   Please check the NIC datasheet for HW limits
+
+tso show
+~~~~~~~~
+
+Display the status of TCP Segmentation Offload:
+
+tso show (port_id)
 
 set fwd
 ~~~~~~~
@@ -635,6 +697,14 @@ Set VF receive/transmit from a port:
 
 set port (port_id) vf (vf_id) (rx|tx) (on|off)
 
+set port - mac address filter (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add/Remove unicast or multicast MAC addr filter for a VF:
+
+set port (port_id) vf (vf_id) (mac_addr)
+ (exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) (on|off)
+
 set port - rx mode(for VF)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1061,6 +1131,15 @@ Close all ports or a specific port:
 
 port close (port_id|all)
 
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
+
+Start/stop a rx/tx queue on a specific port:
+
+port (port_id) (rxq|txq) (queue_id) (start|stop)
+
+Only take effect when port is started.
+
 port config - speed
 ~~~~~~~~~~~~~~~~~~~
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v5 2/4] doc: Corrected info for tx_checksum set mask function, in testpmd UG
  2014-12-01 11:40       ` [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG Pablo de Lara
@ 2014-12-01 11:40         ` Pablo de Lara
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
  3 siblings, 0 replies; 42+ messages in thread
From: Pablo de Lara @ 2014-12-01 11:40 UTC (permalink / raw)
  To: dev

tx_checksum set function does not use bitmask anymore, but strings

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   21 ++++++++-------------
 1 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c010577..975929e 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -516,22 +516,17 @@ Disable hardware insertion of a VLAN header in packets sent on a port:
 
 tx_vlan reset (port_id)
 
-tx_checksum set mask
-~~~~~~~~~~~~~~~~~~~~
-
-Enable hardware insertion of checksum offload with a 4-bit mask, 0x0 - 0xF, in packets sent on a port:
-
-tx_checksum set (mask) (port_id)
-
-The bits in the mask are:
-
-bit 0 - if set insert ip checksum offload
+tx_checksum set
+~~~~~~~~~~~~~~~
 
-bit 1 - if set insert udp checksum offload
+Select hardware or software calculation of the checksum when
+transmitting a packet using the csum forward engine:
 
-bit 2 - if set insert tcp checksum offload
+tx_cksum set (ip|udp|tcp|sctp|vxlan)
 
-bit 3 - if set insert sctp checksum offload
+ip|udp|tcp|sctp always concern the inner layer.
+vxlan concerns the outer IP and UDP layer (in case the packet
+is recognized as a vxlan packet by the forward engine)
 
 .. note::
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v5 3/4] doc: Moved commands in testpmd UG to match testpmd command help order
  2014-12-01 11:40       ` [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG Pablo de Lara
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
@ 2014-12-01 11:40         ` Pablo de Lara
  2014-12-01 12:36           ` Iremonger, Bernard
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
  3 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-12-01 11:40 UTC (permalink / raw)
  To: dev

Moved commands in testpmd UG to set queue rates
to match order in testpmd command help.

Created new section "Filters" to match that
same section in testpmd UG, and moved all
commands related to it there.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 1041 ++++++++++++++-------------
 1 files changed, 523 insertions(+), 518 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 975929e..65d3168 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -444,20 +444,6 @@ Remove a VLAN ID, from the set of VLAN identifiers filtered for VF(s) for port I
 
 rx_vlan rm (vlan_id) port (port_id) vf (vf_mask)
 
-tx_rate (for Queue)
-~~~~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queue of a port ID:
-
-set port (port_id) queue (queue_id) rate (rate_value)
-
-tx_rate (for VF)
-~~~~~~~~~~~~~~~~
-
-Set TX rate limitation for queues in VF of a port ID:
-
-set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
-
 rx_vlan set tpid
 ~~~~~~~~~~~~~~~~
 
@@ -717,6 +703,20 @@ The available receive modes are:
 
 *  MPE: accepts all multicast packets
 
+set port - tx_rate (for Queue)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queue of a port ID:
+
+set port (port_id) queue (queue_id) rate (rate_value)
+
+set port - tx_rate (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX rate limitation for queues in VF of a port ID:
+
+set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
+
 set port - mirror rule
 ~~~~~~~~~~~~~~~~~~~~~~
 
@@ -783,903 +783,908 @@ Show the bypass configuration for a bypass enabled NIC using the lowest port on
 
 show bypass config (port_id)
 
-add_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+set link up
+~~~~~~~~~~~
 
-Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
+Set link up for a port.
 
-add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
+set link-up port (port id)
 
-The available information parameters are:
+set link down
+~~~~~~~~~~~~~
 
-*   port_id:  the port which the Ethertype filter assigned on.
+Set link down for a port.
 
-*   eth_value: the EtherType value want to match,
-    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
+set link-down port (port id)
 
-*   enable: user priority participates in the match.
+Port Functions
+--------------
 
-*   disable: user priority doesn't participate in the match.
+The following sections show functions for configuring ports.
 
-*   pri_value: user priority value that want to match.
+.. note::
 
-*   queue_id : The receive queue associated with this EtherType filter
+    Port configuration changes only become active when forwarding is started/restarted.
 
-*   index: the index of this EtherType filter
+port start
+~~~~~~~~~~
 
-Example:
+Start all ports or a specific port:
 
-.. code-block:: console
+port start (port_id|all)
 
-    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
-    Assign ARP packet to receive queue 3
+port stop
+~~~~~~~~~
 
-remove_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~~~~
+Stop all ports or a specific port:
 
-Remove a L2 Ethertype filter
+port stop (port_id|all)
 
-remove_ethertype_filter (port_id) index (idx)
+port close
+~~~~~~~~~~
 
-get_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
+Close all ports or a specific port:
 
-Get and display a L2 Ethertype filter
+port close (port_id|all)
 
-get_ethertype_filter (port_id) index (idx)
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
 
-Example:
+Start/stop a rx/tx queue on a specific port:
 
-.. code-block:: console
+port (port_id) (rxq|txq) (queue_id) (start|stop)
 
-    testpmd> get_ethertype_filter 0 index 0
+Only take effect when port is started.
 
-    filter[0]:
-        ethertype: 0x0806
-        priority: disable, 0
-        queue: 3
+port config - speed
+~~~~~~~~~~~~~~~~~~~
 
-add_2tuple_filter
-~~~~~~~~~~~~~~~~~
+Set the speed and duplex mode for all ports or a specific port:
 
-Add a 2-tuple filter,
-which identify packets by specific protocol and destination TCP/UDP port
-and forwards packets into one of the receive queues.
+port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
 
-add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
-flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
+port config - queues/descriptors
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The available information parameters are:
+Set number of queues/descriptors for rxq, txq, rxd and txd:
 
-*   port_id: the port which the 2-tuple filter assigned on.
+port config all (rxq|txq|rxd|txd) (value)
 
-*   pro_value: IP L4 protocol
+This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
 
-*   pro_mask: protocol participates in the match or not, 1 means participate
+port config - max-pkt-len
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   port_value: destination port in L4.
+Set the maximum packet length:
 
-*   port_mask: destination port participates in the match or not, 1 means participate.
+port config all max-pkt-len (value)
 
-*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
+This is equivalent to the --max-pkt-len command-line option.
 
-*   prio_value: the priority of this filter.
+port config - CRC Strip
+~~~~~~~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 2-tuple filter
+Set hardware CRC stripping on or off for all ports:
 
-*   index: the index of this 2-tuple filter
+port config all crc-strip (on|off)
 
-Example:
+CRC stripping is off by default.
 
-.. code-block:: console
+The on option is equivalent to the --crc-strip command-line option.
 
-    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
+port config - RX Checksum
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
-remove_2tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+Set hardware RX checksum offload to on or off for all ports:
 
-Remove a 2-tuple filter
+port config all rx-cksum (on|off)
 
-remove_2tuple_filter (port_id) index (idx)
+Checksum offload is off by default.
 
-get_2tuple_filter
-~~~~~~~~~~~~~~~~~
+The on option is equivalent to the --enable-rx-cksum command-line option.
 
-Get and display a 2-tuple filter
+port config - VLAN
+~~~~~~~~~~~~~~~~~~
 
-get_2tuple_filter (port_id) index (idx)
+Set hardware VLAN on or off for all ports:
 
-Example:
+port config all hw-vlan (on|off)
 
-.. code-block:: console
+Hardware VLAN is on by default.
 
-    testpmd> get_2tuple_filter 0 index 0
+The off option is equivalent to the --disable-hw-vlan command-line option.
 
-    filter[0]:
-        Destination Port: 0x0020 mask: 1
-        protocol: 0x06 mask:1 tcp_flags: 0x02
-        priority: 3   queue: 3
+port config - Drop Packets
+~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-add_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set packet drop for packets with no descriptors on or off for all ports:
 
-Add a 5-tuple filter,
-which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
-and routes packets into one of the receive queues.
+port config all drop-en (on|off)
 
-add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
-protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
+Packet dropping for packets with no descriptors is off by default.
 
-The available information parameters are:
+The on option is equivalent to the --enable-drop-en command-line option.
 
-*   port_id: the port which the 5-tuple filter assigned on.
+port config - RSS
+~~~~~~~~~~~~~~~~~
 
-*   dst_address: destination IP address.
+Set the RSS (Receive Side Scaling) mode on or off:
 
-*   src_address: source IP address.
+port config all rss (ip|udp|none)
 
-*   dst_port_value: TCP/UDP destination port.
+RSS is on by default.
 
-*   src_port_value: TCP/UDP source port.
+The off option is equivalent to the --disable-rss command-line option.
 
-*   protocol_value: L4 protocol.
+port config - RSS Reta
+~~~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: participates in the match or not by bit for field above, 1b means participate
+Set the RSS (Receive Side Scaling) redirection table:
 
-*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
+port config all rss reta (hash,queue)[,(hash,queue)]
 
-*   prio_value: the priority of this filter.
+port config - DCB
+~~~~~~~~~~~~~~~~~
 
-*   queue_id: The receive queue associated with this 5-tuple filter.
+Set the DCB mode for an individual port:
 
-*   index: the index of this 5-tuple filter
+port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
 
-Example:
+The traffic class should be 4 or 8.
 
-.. code-block:: console
+port config - Burst
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
+Set the number of packets per burst:
 
-remove_5tuple_filter
-~~~~~~~~~~~~~~~~~~~~
+port config all burst (value)
 
-Remove a 5-tuple filter
+This is equivalent to the --burst command-line option.
 
-remove_5tuple_filter (port_id) index (idx)
+port config - Threshold
+~~~~~~~~~~~~~~~~~~~~~~~
 
-get_5tuple_filter
-~~~~~~~~~~~~~~~~~
+Set thresholds for TX/RX queues:
 
-Get and display a 5-tuple filter
+port config all (threshold) (value)
 
-get_5tuple_filter (port_id) index (idx)
+Where the threshold type can be:
 
-Example:
+*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
 
-.. code-block:: console
+*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
 
-    testpmd> get_5tuple_filter 1 index 0
+*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
 
-    filter[0]:
-        Destination IP: 0x02020205 mask: 1
-        Source IP: 0x02020204 mask: 1
-        Destination Port: 0x0040 mask: 1
-        Source Port: 0x0020 mask: 1
-        protocol: 0x06 mask: 1
-        priority: 3 flags: 0x00 queue: 3
+*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter
-~~~~~~~~~~~~~~
+*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
 
-Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
+*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
 
-add_syn_filter (port_id) priority (high|low) queue (queue_id)
+*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
 
-The available information parameters are:
+*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
 
-*   port_id: the port which the SYN filter assigned on.
+*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
+    These threshold options are also available from the command-line.
 
-*   high: this SYN filter has higher priority than other filters.
+Flow Director Functions
+-----------------------
 
-*   low: this SYN filter has lower priority than other filters.
+The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
 
-*   queue_id: The receive queue associated with this SYN filter
+Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
 
-Example:
+*   Perfect match filters.
+    The hardware checks a match between the masked fields of the received packets and the programmed filters.
 
-.. code-block:: console
+*   Signature filters.
+    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
 
-    testpmd> add_syn_filter 0 priority high queue 3,
+The Flow Director filters can match the following fields in a packet:
 
-remove_syn_filter
-~~~~~~~~~~~~~~~~~
+*   Source IP and destination IP addresses.
 
-Remove SYN filter
+*   Source port and destination port numbers (for UDP and TCP packets).
 
-remove_syn_filter (port_id)
+*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
 
-get_syn_filter
-~~~~~~~~~~~~~~
+*   VLAN header.
 
-Get and display SYN filter
+*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
 
-get_syn_filter (port_id)
+The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
+or parts of the fields.
+For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
 
-Example:
+In the following sections, several common parameters are used in the Flow Director filters.
+These are explained below:
 
-.. code-block:: console
+*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
 
-    testpmd> get_syn_filter 0
+    src 192.168.0.1 1024
 
-    syn filter: on, priority: high, queue: 3
+    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
 
-add_flex_filter
-~~~~~~~~~~~~~~~
+*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
 
-Add a Flex filter,
-which recognizes any arbitrary pattern within the first 128 bytes of the packet
-and routes packets into one of the receive queues.
+*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
 
-add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
-priority (prio_value) queue (queue_id) index (idx)
+The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
+and is counted from the first byte of the destination Ethernet MAC address.
+The default offset is 0xC bytes, which is the "Type" word in the MAC header.
+Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
+These values change when a VLAN tag is added.
 
-The available information parameters are:
+*   vlan: The VLAN header to match in the packet.
 
-*   port_id: the port which the Flex filter assigned on.
+*   queue: The index of the RX queue to route matched packets to.
 
-*   len_value: filter length in byte, no greater than 128.
+*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
 
-*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
+add_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
+Add a signature filter:
 
-*   prio_value: the priority of this filter.
+# Command is displayed on several lines for clarity.
 
-*   queue_id: The receive queue associated with this Flex filter.
+add_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-*   index: the index of this Flex filter
+    src (src_ip_address) (src_port)
 
-Example:
+    dst (dst_ip_address) (dst_port)
 
-.. code-block:: console
+    flexbytes (flexbytes_values)
 
-   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
+    vlan (vlan_id) queue (queue_id)
 
-Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
+upd_signature_filter
+~~~~~~~~~~~~~~~~~~~~
 
-remove_flex_filter
-~~~~~~~~~~~~~~~~~~
+Update a signature filter:
 
-Remove a Flex filter
+# Command is displayed on several lines for clarity.
 
-remove_flex_filter (port_id) index (idx)
+upd_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-get_flex_filter
-~~~~~~~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Get and display a Flex filter
+    dst (dst_ip_address) (dst_port)
 
-get_flex_filter (port_id) index (idx)
+    flexbytes (flexbytes_values)
 
-Example:
+    vlan (vlan_id) queue (queue_id)
 
-.. code-block:: console
+rm_signature_filter
+~~~~~~~~~~~~~~~~~~~
 
-    testpmd> get_flex_filter 0 index 0
+Remove a signature filter:
 
-    filter[0]:
+# Command is displayed on several lines for clarity.
 
-        length: 16
+rm_signature_filter (port_id) (ip|udp|tcp|sctp)
 
-        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-    00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    src (src_ip_address) (src_port)
 
-        mask[]:
-    0b0000000000001100000000000000000000000000000000000000000000000000000000
-    0000000000000000000000000000000000000000000000000000000000
+    dst (dst_ip_address) (dst_port)
 
-        priority: 3   queue: 3
+    flexbytes (flexbytes_values)
 
-set link up
-~~~~~~~~~~~
+    vlan (vlan_id)
 
-Set link up for a port.
+add_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-set link-up port (port id)
+Add a perfect filter:
 
-set link down
-~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set link down for a port.
+add_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-set link-down port (port id)
+    src (src_ip_address) (src_port)
 
-Port Functions
---------------
+    dst (dst_ip_address) (dst_port)
 
-The following sections show functions for configuring ports.
+    flexbytes (flexbytes_values)
 
-.. note::
+    vlan (vlan_id) queue (queue_id) soft (soft_id)
 
-    Port configuration changes only become active when forwarding is started/restarted.
+upd_perfect_filter
+~~~~~~~~~~~~~~~~~~
 
-port start
-~~~~~~~~~~
+Update a perfect filter:
 
-Start all ports or a specific port:
+# Command is displayed on several lines for clarity.
 
-port start (port_id|all)
+upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-port stop
-~~~~~~~~~
+    src (src_ip_address) (src_port)
 
-Stop all ports or a specific port:
+    dst (dst_ip_address) (dst_port)
 
-port stop (port_id|all)
+    flexbytes (flexbytes_values)
 
-port close
-~~~~~~~~~~
+    vlan (vlan_id) queue (queue_id)
 
-Close all ports or a specific port:
+rm_perfect_filter
+~~~~~~~~~~~~~~~~~
 
-port close (port_id|all)
+Remove a perfect filter:
 
-port start/stop queue
-~~~~~~~~~~~~~~~~~~~~~
+rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
 
-Start/stop a rx/tx queue on a specific port:
+    src (src_ip_address) (src_port)
 
-port (port_id) (rxq|txq) (queue_id) (start|stop)
+    dst (dst_ip_address) (dst_port)
 
-Only take effect when port is started.
+    flexbytes (flexbytes_values)
 
-port config - speed
-~~~~~~~~~~~~~~~~~~~
+    vlan (vlan_id) soft (soft_id)
 
-Set the speed and duplex mode for all ports or a specific port:
+set_masks_filter
+~~~~~~~~~~~~~~~~
 
-port config (port_id|all) speed (10|100|1000|10000|auto) duplex (half|full|auto)
+Set IPv4 filter masks:
 
-port config - queues/descriptors
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Command is displayed on several lines for clarity.
 
-Set number of queues/descriptors for rxq, txq, rxd and txd:
+set_masks_filter (port_id) only_ip_flow (0|1)
 
-port config all (rxq|txq|rxd|txd) (value)
+    src_mask (ip_src_mask) (src_port_mask)
 
-This is equivalent to the --rxq, --txq, --rxd and --txd command-line options.
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-port config - max-pkt-len
-~~~~~~~~~~~~~~~~~~~~~~~~~
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-Set the maximum packet length:
+set_ipv6_masks_filter
+~~~~~~~~~~~~~~~~~~~~~
 
-port config all max-pkt-len (value)
+Set IPv6 filter masks:
 
-This is equivalent to the --max-pkt-len command-line option.
+# Command is displayed on several lines for clarity.
 
-port config - CRC Strip
-~~~~~~~~~~~~~~~~~~~~~~~
+set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
 
-Set hardware CRC stripping on or off for all ports:
+    src_mask (ip_src_mask) (src_port_mask)
 
-port config all crc-strip (on|off)
+    dst_mask (ip_dst_mask) (dst_port_mask)
 
-CRC stripping is off by default.
+    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
 
-The on option is equivalent to the --crc-strip command-line option.
+    compare_dst (0|1)
 
-port config - RX Checksum
-~~~~~~~~~~~~~~~~~~~~~~~~~
+Link Bonding Functions
+----------------------
 
-Set hardware RX checksum offload to on or off for all ports:
+The Link Bonding functions make it possible to dynamically create and
+manage link bonding devices from within testpmd interactive prompt.
 
-port config all rx-cksum (on|off)
+create bonded device
+~~~~~~~~~~~~~~~~~~~~
 
-Checksum offload is off by default.
+Create a new bonding device:
 
-The on option is equivalent to the --enable-rx-cksum command-line option.
+create bonded device (mode) (socket)
 
-port config - VLAN
-~~~~~~~~~~~~~~~~~~
+For example, to create a bonded device in mode 1 on socket 0.
 
-Set hardware VLAN on or off for all ports:
+.. code-block:: console
 
-port config all hw-vlan (on|off)
+    testpmd> create bonded 1 0
+    created new bonded device (port X)
 
-Hardware VLAN is on by default.
+add bonding slave
+~~~~~~~~~~~~~~~~~
 
-The off option is equivalent to the --disable-hw-vlan command-line option.
+Adds Ethernet device to a Link Bonding device:
 
-port config - Drop Packets
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+add bonding slave (slave id) (port id)
 
-Set packet drop for packets with no descriptors on or off for all ports:
+For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
 
-port config all drop-en (on|off)
+.. code-block:: console
 
-Packet dropping for packets with no descriptors is off by default.
+    testpmd> add bonding slave 6 10
 
-The on option is equivalent to the --enable-drop-en command-line option.
 
-port config - RSS
-~~~~~~~~~~~~~~~~~
+remove bonding slave
+~~~~~~~~~~~~~~~~~~~~
 
-Set the RSS (Receive Side Scaling) mode on or off:
+Removes an Ethernet slave device from a Link Bonding device:
 
-port config all rss (ip|udp|none)
+remove bonding slave (slave id) (port id)
 
-RSS is on by default.
+For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
 
-The off option is equivalent to the --disable-rss command-line option.
+.. code-block:: console
 
-port config - RSS Reta
-~~~~~~~~~~~~~~~~~~~~~~
+    testpmd> remove bonding slave 6 10
 
-Set the RSS (Receive Side Scaling) redirection table:
+set bonding mode
+~~~~~~~~~~~~~~~~
 
-port config all rss reta (hash,queue)[,(hash,queue)]
+Set the Link Bonding mode of a Link Bonding device:
 
-port config - DCB
-~~~~~~~~~~~~~~~~~
+set bonding mode (value) (port id)
 
-Set the DCB mode for an individual port:
+For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
 
-port config (port_id) dcb vt (on|off) (traffic_class) pfc (on|off)
+.. code-block:: console
 
-The traffic class should be 4 or 8.
+    testpmd> set bonding mode 3 10
 
-port config - Burst
+set bonding primary
 ~~~~~~~~~~~~~~~~~~~
 
-Set the number of packets per burst:
-
-port config all burst (value)
-
-This is equivalent to the --burst command-line option.
+Set an Ethernet slave device as the primary device on a Link Bonding device:
 
-port config - Threshold
-~~~~~~~~~~~~~~~~~~~~~~~
+set bonding primary (slave id) (port id)
 
-Set thresholds for TX/RX queues:
+For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
 
-port config all (threshold) (value)
+.. code-block:: console
 
-Where the threshold type can be:
+    testpmd> set bonding primary 6 10
 
-*   txpt: Set the prefetch threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac
+~~~~~~~~~~~~~~~
 
-*   txht: Set the host threshold register of the TX rings, 0 <= value <= 255.
+Set the MAC address of a Link Bonding device:
 
-*   txwt: Set the write-back threshold register of the TX rings, 0 <= value <= 255.
+set bonding mac (port id) (mac)
 
-*   rxpt: Set the prefetch threshold register of the RX rings, 0 <= value <= 255.
+For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
 
-*   rxht: Set the host threshold register of the RX rings, 0 <= value <= 255.
+.. code-block:: console
 
-*   rxwt: Set the write-back threshold register of the RX rings, 0 <= value <= 255.
+    testpmd> set bonding mac 10 00:00:00:00:00:01
 
-*   txfreet: Set the transmit free threshold of the TX rings, 0 <= value <= txd.
+set bonding xmit_balance_policy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-*   rxfreet: Set the transmit free threshold of the RX rings, 0 <= value <= rxd.
+Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
 
-*   txrst: Set the transmit RS bit threshold of TX rings, 0 <= value <= txd.
-    These threshold options are also available from the command-line.
+set bonding xmit_balance_policy (port_id) (l2|l23|l34)
 
-Flow Director Functions
------------------------
+For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
 
-The Flow Director works in receive mode to identify specific flows or sets of flows and route them to specific queues.
+.. code-block:: console
 
-Two types of filtering are supported which are referred to as Perfect Match and Signature filters:
+    testpmd> set bonding xmit_balance_policy 10 l34
 
-*   Perfect match filters.
-    The hardware checks a match between the masked fields of the received packets and the programmed filters.
 
-*   Signature filters.
-    The hardware checks a match between a hash-based signature of the masked fields of the received packet.
+set bonding mon_period
+~~~~~~~~~~~~~~~~~~~~~~
 
-The Flow Director filters can match the following fields in a packet:
+Set the link status monitoring polling period in milliseconds for a bonding devicie.
 
-*   Source IP and destination IP addresses.
+This adds support for PMD slave devices which do not support link status interrupts.
+When the mon_period is set to a value greater than 0 then all PMD's which do not support
+link status ISR will be queried every polling interval to check if their link status has changed.
 
-*   Source port and destination port numbers (for UDP and TCP packets).
+set bonding mon_period (port_id) (value)
 
-*   IPv4/IPv6 and UDP/ TCP/SCTP protocol match.
+For example, to set the link status monitoring polling period of bonded device (port 5) to 150ms
 
-*   VLAN header.
+.. code-block:: console
 
-*   Flexible 2-byte tuple match anywhere in the first 64 bytes of the packet.
+    testpmd> set bonding mon_period 5 150
 
-The Flow Director can also mask out parts of all of these fields so that filters are only applied to certain fields
-or parts of the fields.
-For example it is possible to mask out sub-nets of IP addresses or to ignore VLAN headers.
 
-In the following sections, several common parameters are used in the Flow Director filters.
-These are explained below:
+show bonding config
+~~~~~~~~~~~~~~~~~~~
 
-*   src: A pair of source address values. The source IP, in IPv4 or IPv6 format, and the source port:
+Show the current configuration of a Link Bonding device:
 
-    src 192.168.0.1 1024
+show bonding config (port id)
 
-    src 2001:DB8:85A3:0:0:8A2E:370:7000 1024
+For example,
+to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
+in balance mode with a transmission policy of layer 2+3.
 
-*   dst: A pair of destination address values. The destination IP, in IPv4 or IPv6 format, and the destination port.
+.. code-block:: console
 
-*   flexbytes: A 2-byte tuple to be matched within the first 64 bytes of a packet.
+    testpmd> show bonding config 9
+        Bonding mode: 2
+        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
+        Slaves (3): [1 3 4]
+        Active Slaves (3): [1 3 4]
+        Primary: [3]
 
-The offset where the match occurs is set by the --pkt-filter-flexbytes-offset command-line parameter
-and is counted from the first byte of the destination Ethernet MAC address.
-The default offset is 0xC bytes, which is the "Type" word in the MAC header.
-Typically, the flexbyte value is set to 0x0800 to match the IPv4 MAC type or 0x86DD to match IPv6.
-These values change when a VLAN tag is added.
+Register Functions
+------------------
 
-*   vlan: The VLAN header to match in the packet.
+The Register functions can be used to read from and write to registers on the network card referenced by a port number.
+This is mainly useful for debugging purposes.
+Reference should be made to the appropriate datasheet for the network card for details on the register addresses
+and fields that can be accessed.
 
-*   queue: The index of the RX queue to route matched packets to.
+read reg
+~~~~~~~~
 
-*   soft: The 16-bit value in the MBUF flow director ID field for RX packets matching the filter.
+Display the value of a port register:
 
-add_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+read reg (port_id) (address)
 
-Add a signature filter:
+For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
 
-# Command is displayed on several lines for clarity.
+.. code-block:: console
 
-add_signature_filter (port_id) (ip|udp|tcp|sctp)
+    testpmd> read reg 0 0xEE00
+    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
 
-    src (src_ip_address) (src_port)
+read regfield
+~~~~~~~~~~~~~
 
-    dst (dst_ip_address) (dst_port)
+Display a port register bit field:
 
-    flexbytes (flexbytes_values)
+read regfield (port_id) (address) (bit_x) (bit_y)
 
-    vlan (vlan_id) queue (queue_id)
+For example, reading the lowest two bits from the register in the example above:
 
-upd_signature_filter
-~~~~~~~~~~~~~~~~~~~~
+.. code-block:: console
 
-Update a signature filter:
+    testpmd> read regfield 0 0xEE00 0 1
+    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
 
-# Command is displayed on several lines for clarity.
+read regbit
+~~~~~~~~~~~
 
-upd_signature_filter (port_id) (ip|udp|tcp|sctp)
+Display a single port register bit:
 
-    src (src_ip_address) (src_port)
+read regbit (port_id) (address) (bit_x)
 
-    dst (dst_ip_address) (dst_port)
+For example, reading the lowest bit from the register in the example above:
 
-    flexbytes (flexbytes_values)
+.. code-block:: console
 
-    vlan (vlan_id) queue (queue_id)
+    testpmd> read regbit 0 0xEE00 0
+    port 0 PCI register at offset 0xEE00: bit 0=1
 
-rm_signature_filter
-~~~~~~~~~~~~~~~~~~~
+write reg
+~~~~~~~~~
 
-Remove a signature filter:
+Set the value of a port register:
 
-# Command is displayed on several lines for clarity.
+write reg (port_id) (address) (value)
 
-rm_signature_filter (port_id) (ip|udp|tcp|sctp)
+For example, to clear a register:
 
-    src (src_ip_address) (src_port)
+.. code-block:: console
 
-    dst (dst_ip_address) (dst_port)
+    testpmd> write reg 0 0xEE00 0x0
+    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
 
-    flexbytes (flexbytes_values)
+write regfield
+~~~~~~~~~~~~~~
 
-    vlan (vlan_id)
+Set bit field of a port register:
 
-add_perfect_filter
-~~~~~~~~~~~~~~~~~~
+write regfield (port_id) (address) (bit_x) (bit_y) (value)
 
-Add a perfect filter:
+For example, writing to the register cleared in the example above:
 
-# Command is displayed on several lines for clarity.
+.. code-block:: console
 
-add_perfect_filter (port_id) (ip|udp|tcp|sctp)
+    testpmd> write regfield 0 0xEE00 0 1 2
+    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
 
-    src (src_ip_address) (src_port)
+write regbit
+~~~~~~~~~~~~
 
-    dst (dst_ip_address) (dst_port)
+Set single bit value of a port register:
 
-    flexbytes (flexbytes_values)
+write regbit (port_id) (address) (bit_x) (value)
 
-    vlan (vlan_id) queue (queue_id) soft (soft_id)
+For example, to set the high bit in the register from the example above:
 
-upd_perfect_filter
-~~~~~~~~~~~~~~~~~~
+.. code-block:: console
 
-Update a perfect filter:
+    testpmd> write regbit 0 0xEE00 31 1
+    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
 
-# Command is displayed on several lines for clarity.
+Filter Functions
+----------------
 
-upd_perfect_filter (port_id) (ip|udp|tcp|sctp)
+This section details the available filter functions that are available.
 
-    src (src_ip_address) (src_port)
+add_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-    dst (dst_ip_address) (dst_port)
+Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
 
-    flexbytes (flexbytes_values)
+add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
 
-    vlan (vlan_id) queue (queue_id)
+The available information parameters are:
 
-rm_perfect_filter
-~~~~~~~~~~~~~~~~~
+*   port_id:  the port which the Ethertype filter assigned on.
 
-Remove a perfect filter:
+*   eth_value: the EtherType value want to match,
+    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
 
-rm_perfect_filter (port_id) (ip|udp|tcp|sctp)
+*   enable: user priority participates in the match.
 
-    src (src_ip_address) (src_port)
+*   disable: user priority doesn't participate in the match.
 
-    dst (dst_ip_address) (dst_port)
+*   pri_value: user priority value that want to match.
 
-    flexbytes (flexbytes_values)
+*   queue_id : The receive queue associated with this EtherType filter
 
-    vlan (vlan_id) soft (soft_id)
+*   index: the index of this EtherType filter
 
-set_masks_filter
-~~~~~~~~~~~~~~~~
+Example:
 
-Set IPv4 filter masks:
+.. code-block:: console
 
-# Command is displayed on several lines for clarity.
+    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
+    Assign ARP packet to receive queue 3
 
-set_masks_filter (port_id) only_ip_flow (0|1)
+remove_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~~~~
 
-    src_mask (ip_src_mask) (src_port_mask)
+Remove a L2 Ethertype filter
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+remove_ethertype_filter (port_id) index (idx)
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+get_ethertype_filter
+~~~~~~~~~~~~~~~~~~~~
 
-set_ipv6_masks_filter
-~~~~~~~~~~~~~~~~~~~~~
+Get and display a L2 Ethertype filter
 
-Set IPv6 filter masks:
+get_ethertype_filter (port_id) index (idx)
 
-# Command is displayed on several lines for clarity.
+Example:
 
-set_ipv6_masks_filter (port_id) only_ip_flow (0|1)
+.. code-block:: console
 
-    src_mask (ip_src_mask) (src_port_mask)
+    testpmd> get_ethertype_filter 0 index 0
 
-    dst_mask (ip_dst_mask) (dst_port_mask)
+    filter[0]:
+        ethertype: 0x0806
+        priority: disable, 0
+        queue: 3
 
-    flexbytes (0|1) vlan_id (0|1) vlan_prio (0|1)
+add_2tuple_filter
+~~~~~~~~~~~~~~~~~
 
-    compare_dst (0|1)
+Add a 2-tuple filter,
+which identify packets by specific protocol and destination TCP/UDP port
+and forwards packets into one of the receive queues.
 
-Link Bonding Functions
-----------------------
+add_2tuple_filter (port_id) protocol (pro_value) (pro_mask) dst_port (port_value) (port_mask)
+flags (flg_value) priority (prio_value) queue (queue_id) index (idx)
 
-The Link Bonding functions make it possible to dynamically create and
-manage link bonding devices from within testpmd interactive prompt.
+The available information parameters are:
 
-create bonded device
-~~~~~~~~~~~~~~~~~~~~
+*   port_id: the port which the 2-tuple filter assigned on.
 
-Create a new bonding device:
+*   pro_value: IP L4 protocol
 
-create bonded device (mode) (socket)
+*   pro_mask: protocol participates in the match or not, 1 means participate
 
-For example, to create a bonded device in mode 1 on socket 0.
+*   port_value: destination port in L4.
 
-.. code-block:: console
+*   port_mask: destination port participates in the match or not, 1 means participate.
 
-    testpmd> create bonded 1 0
-    created new bonded device (port X)
+*   flg_value: TCP control bits. The non-zero value is invalid, when the pro_value is not set to 0x06 (TCP).
 
-add bonding slave
-~~~~~~~~~~~~~~~~~
+*   prio_value: the priority of this filter.
 
-Adds Ethernet device to a Link Bonding device:
+*   queue_id: The receive queue associated with this 2-tuple filter
 
-add bonding slave (slave id) (port id)
+*   index: the index of this 2-tuple filter
 
-For example, to add Ethernet device (port 6) to a Link Bonding device (port 10).
+Example:
 
 .. code-block:: console
 
-    testpmd> add bonding slave 6 10
-
+    testpmd> add_2tuple_filter 0 protocol 0x06 1 dst_port 32 1 flags 0x02 priority 3 queue 3 index 0
 
-remove bonding slave
+remove_2tuple_filter
 ~~~~~~~~~~~~~~~~~~~~
 
-Removes an Ethernet slave device from a Link Bonding device:
+Remove a 2-tuple filter
 
-remove bonding slave (slave id) (port id)
+remove_2tuple_filter (port_id) index (idx)
 
-For example, to remove Ethernet slave device (port 6) to a Link Bonding device (port 10).
+get_2tuple_filter
+~~~~~~~~~~~~~~~~~
+
+Get and display a 2-tuple filter
+
+get_2tuple_filter (port_id) index (idx)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> remove bonding slave 6 10
+    testpmd> get_2tuple_filter 0 index 0
 
-set bonding mode
-~~~~~~~~~~~~~~~~
+    filter[0]:
+        Destination Port: 0x0020 mask: 1
+        protocol: 0x06 mask:1 tcp_flags: 0x02
+        priority: 3   queue: 3
 
-Set the Link Bonding mode of a Link Bonding device:
+add_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-set bonding mode (value) (port id)
+Add a 5-tuple filter,
+which consists of a 5-tuple (protocol, source and destination IP addresses, source and destination TCP/UDP/SCTP port)
+and routes packets into one of the receive queues.
 
-For example, to set the bonding mode of a Link Bonding device (port 10) to broadcast (mode 3).
+add_5tuple_filter (port_id) dst_ip (dst_address) src_ip (src_address) dst_port (dst_port_value) src_port (src_port_value)
+protocol (protocol_value) mask (mask_value) flags (flags_value) priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> set bonding mode 3 10
+*   port_id: the port which the 5-tuple filter assigned on.
 
-set bonding primary
-~~~~~~~~~~~~~~~~~~~
+*   dst_address: destination IP address.
 
-Set an Ethernet slave device as the primary device on a Link Bonding device:
+*   src_address: source IP address.
 
-set bonding primary (slave id) (port id)
+*   dst_port_value: TCP/UDP destination port.
 
-For example, to set the Ethernet slave device (port 6) as the primary port of a Link Bonding device (port 10).
+*   src_port_value: TCP/UDP source port.
 
-.. code-block:: console
+*   protocol_value: L4 protocol.
 
-    testpmd> set bonding primary 6 10
+*   mask_value: participates in the match or not by bit for field above, 1b means participate
 
-set bonding mac
-~~~~~~~~~~~~~~~
+*   flags_value: TCP control bits. The non-zero value is invalid, when the protocol_value is not set to 0x06 (TCP).
 
-Set the MAC address of a Link Bonding device:
+*   prio_value: the priority of this filter.
 
-set bonding mac (port id) (mac)
+*   queue_id: The receive queue associated with this 5-tuple filter.
 
-For example, to set the MAC address of a Link Bonding device (port 10) to 00:00:00:00:00:01
+*   index: the index of this 5-tuple filter
+
+Example:
 
 .. code-block:: console
 
-    testpmd> set bonding mac 10 00:00:00:00:00:01
+    testpmd> add_5tuple_filter 1 dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port 64 src_port 32 protocol 0x06 mask 0x1F flags 0x0 priority 3 queue 3 index 0
 
-set bonding xmit_balance_policy
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+remove_5tuple_filter
+~~~~~~~~~~~~~~~~~~~~
 
-Set the transmission policy for a Link Bonding device when it is in Balance XOR mode:
+Remove a 5-tuple filter
 
-set bonding xmit_balance_policy (port_id) (l2|l23|l34)
+remove_5tuple_filter (port_id) index (idx)
 
-For example, set a Link Bonding device (port 10) to use a balance policy of layer 3+4 (IP addresses & UDP ports )
+get_5tuple_filter
+~~~~~~~~~~~~~~~~~
 
-.. code-block:: console
+Get and display a 5-tuple filter
 
-    testpmd> set bonding xmit_balance_policy 10 l34
+get_5tuple_filter (port_id) index (idx)
 
+Example:
 
-set bonding mon_period
-~~~~~~~~~~~~~~~~~~~~~~
+.. code-block:: console
 
-Set the link status monitoring polling period in milliseconds for a bonding devicie.
+    testpmd> get_5tuple_filter 1 index 0
 
-This adds support for PMD slave devices which do not support link status interrupts.
-When the mon_period is set to a value greater than 0 then all PMD's which do not support
-link status ISR will be queried every polling interval to check if their link status has changed.
+    filter[0]:
+        Destination IP: 0x02020205 mask: 1
+        Source IP: 0x02020204 mask: 1
+        Destination Port: 0x0040 mask: 1
+        Source Port: 0x0020 mask: 1
+        protocol: 0x06 mask: 1
+        priority: 3 flags: 0x00 queue: 3
 
-set bonding mon_period (port_id) (value)
+add_syn_filter
+~~~~~~~~~~~~~~
 
-For example, to set the link status monitoring polling period of bonded device (port 5) to 150ms
+Add SYN filter, which can forward TCP packets whose *SYN* flag is set into a separate queue.
 
-.. code-block:: console
+add_syn_filter (port_id) priority (high|low) queue (queue_id)
 
-    testpmd> set bonding mon_period 5 150
+The available information parameters are:
 
+*   port_id: the port which the SYN filter assigned on.
 
-show bonding config
-~~~~~~~~~~~~~~~~~~~
+*   high: this SYN filter has higher priority than other filters.
 
-Show the current configuration of a Link Bonding device:
+*   low: this SYN filter has lower priority than other filters.
 
-show bonding config (port id)
+*   queue_id: The receive queue associated with this SYN filter
 
-For example,
-to show the configuration a Link Bonding device (port 9) with 3 slave devices (1, 3, 4)
-in balance mode with a transmission policy of layer 2+3.
+Example:
 
 .. code-block:: console
 
-    testpmd> show bonding config 9
-        Bonding mode: 2
-        Balance Xmit Policy: BALANCE_XMIT_POLICY_LAYER23
-        Slaves (3): [1 3 4]
-        Active Slaves (3): [1 3 4]
-        Primary: [3]
+    testpmd> add_syn_filter 0 priority high queue 3,
 
-Register Functions
-------------------
+remove_syn_filter
+~~~~~~~~~~~~~~~~~
 
-The Register functions can be used to read from and write to registers on the network card referenced by a port number.
-This is mainly useful for debugging purposes.
-Reference should be made to the appropriate datasheet for the network card for details on the register addresses
-and fields that can be accessed.
+Remove SYN filter
 
-read reg
-~~~~~~~~
+remove_syn_filter (port_id)
 
-Display the value of a port register:
+get_syn_filter
+~~~~~~~~~~~~~~
 
-read reg (port_id) (address)
+Get and display SYN filter
 
-For example, to examine the Flow Director control register (FDIRCTL, 0x0000EE000) on an Intel® 82599 10 GbE Controller:
+get_syn_filter (port_id)
+
+Example:
 
 .. code-block:: console
 
-    testpmd> read reg 0 0xEE00
-    port 0 PCI register at offset 0xEE00: 0x4A060029 (1241907241)
+    testpmd> get_syn_filter 0
 
-read regfield
-~~~~~~~~~~~~~
+    syn filter: on, priority: high, queue: 3
 
-Display a port register bit field:
+add_flex_filter
+~~~~~~~~~~~~~~~
 
-read regfield (port_id) (address) (bit_x) (bit_y)
+Add a Flex filter,
+which recognizes any arbitrary pattern within the first 128 bytes of the packet
+and routes packets into one of the receive queues.
 
-For example, reading the lowest two bits from the register in the example above:
+add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
+priority (prio_value) queue (queue_id) index (idx)
 
-.. code-block:: console
+The available information parameters are:
 
-    testpmd> read regfield 0 0xEE00 0 1
-    port 0 PCI register at offset 0xEE00: bits[0, 1]=0x1 (1)
+*   port_id: the port which the Flex filter assigned on.
 
-read regbit
-~~~~~~~~~~~
+*   len_value: filter length in byte, no greater than 128.
 
-Display a single port register bit:
+*   bytes_string: a sting in format of octal, means the value the flex filter need to match.
 
-read regbit (port_id) (address) (bit_x)
+*   mask_value: a sting in format of octal, bit 1 means corresponding byte in DWORD participates in the match.
 
-For example, reading the lowest bit from the register in the example above:
+*   prio_value: the priority of this filter.
 
-.. code-block:: console
+*   queue_id: The receive queue associated with this Flex filter.
 
-    testpmd> read regbit 0 0xEE00 0
-    port 0 PCI register at offset 0xEE00: bit 0=1
+*   index: the index of this Flex filter
 
-write reg
-~~~~~~~~~
+Example:
 
-Set the value of a port register:
+.. code-block:: console
 
-write reg (port_id) (address) (value)
+   testpmd> add_flex_filter 0 len 16 bytes 0x00000000000000000000000008060000 mask 000C priority 3 queue 3 index 0
 
-For example, to clear a register:
+Assign a packet whose 13th and 14th bytes are 0x0806 to queue 3.
 
-.. code-block:: console
+remove_flex_filter
+~~~~~~~~~~~~~~~~~~
 
-    testpmd> write reg 0 0xEE00 0x0
-    port 0 PCI register at offset 0xEE00: 0x00000000 (0)
+Remove a Flex filter
 
-write regfield
-~~~~~~~~~~~~~~
+remove_flex_filter (port_id) index (idx)
 
-Set bit field of a port register:
+get_flex_filter
+~~~~~~~~~~~~~~~
 
-write regfield (port_id) (address) (bit_x) (bit_y) (value)
+Get and display a Flex filter
 
-For example, writing to the register cleared in the example above:
+get_flex_filter (port_id) index (idx)
 
-.. code-block:: console
+Example:
 
-    testpmd> write regfield 0 0xEE00 0 1 2
-    port 0 PCI register at offset 0xEE00: 0x00000002 (2)
+.. code-block:: console
 
-write regbit
-~~~~~~~~~~~~
+    testpmd> get_flex_filter 0 index 0
 
-Set single bit value of a port register:
+    filter[0]:
 
-write regbit (port_id) (address) (bit_x) (value)
+        length: 16
 
-For example, to set the high bit in the register from the example above:
+        dword[]: 0x00000000 00000000 00000000 08060000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+    00000000 00000000 00000000 00000000 00000000 00000000 00000000
 
-.. code-block:: console
+        mask[]:
+    0b0000000000001100000000000000000000000000000000000000000000000000000000
+    0000000000000000000000000000000000000000000000000000000000
 
-    testpmd> write regbit 0 0xEE00 31 1
-    port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
+        priority: 3   queue: 3
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [dpdk-dev] [PATCH v5 4/4] doc: Various document fixes in testpmd UG
  2014-12-01 11:40       ` [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
                           ` (2 preceding siblings ...)
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
@ 2014-12-01 11:40         ` Pablo de Lara
  2014-12-01 12:37           ` Iremonger, Bernard
  3 siblings, 1 reply; 42+ messages in thread
From: Pablo de Lara @ 2014-12-01 11:40 UTC (permalink / raw)
  To: dev

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 65d3168..be935c2 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -162,10 +162,12 @@ size is used to indicate the hardware supported reta size
 show port rss-hash
 ~~~~~~~~~~~~~~~~~~
 
-Display the RSS hash functions and RSS hash key of port (port_id).
+Display the RSS hash functions and RSS hash key of a port:
 
-show port (port_id) rss-hash [key] clear port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+show port (port_id) rss-hash [key]
+
+clear port
+~~~~~~~~~~
 
 Clear the port statistics for a given port or for all ports:
 
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG Pablo de Lara
@ 2014-12-01 12:32           ` Iremonger, Bernard
  0 siblings, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-12-01 12:32 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Monday, December 1, 2014 11:41 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG
> 
> Added info in testpmd functions section for the following commands:
> 
> - tunnel_filter add
> - tunnel_filter rm
> - rx_vxlan_port add
> - rx_vxlan_port rm
> - port stop/start queue
> - set port mac address filter (for VF)
> - tx_checksum set
> - tso set
> - tso show
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

 I have applied the patch to my tree next/dpdk-doc.

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v5 3/4] doc: Moved commands in testpmd UG to match testpmd command help order
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
@ 2014-12-01 12:36           ` Iremonger, Bernard
  0 siblings, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-12-01 12:36 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Monday, December 1, 2014 11:41 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v5 3/4] doc: Moved commands in testpmd UG to match testpmd
> command help order
> 
> Moved commands in testpmd UG to set queue rates to match order in testpmd command help.
> 
> Created new section "Filters" to match that same section in testpmd UG, and moved all commands
> related to it there.
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

 I have applied the patch to my tree next/dpdk-doc.



^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH v5 4/4] doc: Various document fixes in testpmd UG
  2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
@ 2014-12-01 12:37           ` Iremonger, Bernard
  0 siblings, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-12-01 12:37 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Monday, December 1, 2014 11:41 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v5 4/4] doc: Various document fixes in testpmd UG
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

 I have applied the patch to my tree next/dpdk-doc.

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG
  2014-11-15 19:13 ` [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
@ 2014-12-03 13:17   ` Thomas Monjalon
  2014-12-03 13:26     ` De Lara Guarch, Pablo
  2014-12-04 11:27     ` Iremonger, Bernard
  0 siblings, 2 replies; 42+ messages in thread
From: Thomas Monjalon @ 2014-12-03 13:17 UTC (permalink / raw)
  To: Pablo de Lara; +Cc: dev

2014-11-15 19:13, Pablo de Lara:
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
[...]
> -Quit to prompt in Linux or reboot on Baremetal:
> +Quit to prompt in Linux/FreeBSD or reboot on Baremetal:

Bare-metal traces have been removed.

-- 
Thomas

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG
  2014-12-03 13:17   ` Thomas Monjalon
@ 2014-12-03 13:26     ` De Lara Guarch, Pablo
  2014-12-03 13:38       ` Thomas Monjalon
  2014-12-04 11:27     ` Iremonger, Bernard
  1 sibling, 1 reply; 42+ messages in thread
From: De Lara Guarch, Pablo @ 2014-12-03 13:26 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev

Hi Thomas,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Thomas Monjalon
> Sent: Wednesday, December 03, 2014 1:18 PM
> To: De Lara Guarch, Pablo
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd
> UG
> 
> 2014-11-15 19:13, Pablo de Lara:
> > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> [...]
> > -Quit to prompt in Linux or reboot on Baremetal:
> > +Quit to prompt in Linux/FreeBSD or reboot on Baremetal:
> 
> Bare-metal traces have been removed.
You are looking at the v1, I sent a v5 last Monday without that part.

> 
> --
> Thomas

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG
  2014-12-03 13:26     ` De Lara Guarch, Pablo
@ 2014-12-03 13:38       ` Thomas Monjalon
  0 siblings, 0 replies; 42+ messages in thread
From: Thomas Monjalon @ 2014-12-03 13:38 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

2014-12-03 13:26, De Lara Guarch, Pablo:
> Hi Thomas,
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Thomas Monjalon
> > Sent: Wednesday, December 03, 2014 1:18 PM
> > To: De Lara Guarch, Pablo
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd
> > UG
> > 
> > 2014-11-15 19:13, Pablo de Lara:
> > > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > [...]
> > > -Quit to prompt in Linux or reboot on Baremetal:
> > > +Quit to prompt in Linux/FreeBSD or reboot on Baremetal:
> > 
> > Bare-metal traces have been removed.
> You are looking at the v1, I sent a v5 last Monday without that part.

Exact, sorry.
So I guess Bernard should update his branch (I was looking at dpdk-doc):
	http://dpdk.org/browse/next/dpdk-doc/commit/?id=fc888aeff9fe

-- 
Thomas

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG
  2014-12-03 13:17   ` Thomas Monjalon
  2014-12-03 13:26     ` De Lara Guarch, Pablo
@ 2014-12-04 11:27     ` Iremonger, Bernard
  1 sibling, 0 replies; 42+ messages in thread
From: Iremonger, Bernard @ 2014-12-04 11:27 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev

Hi Thomas,

> Subject: Re: [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG
> 
> 2014-11-15 19:13, Pablo de Lara:
> > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> [...]
> > -Quit to prompt in Linux or reboot on Baremetal:
> > +Quit to prompt in Linux/FreeBSD or reboot on Baremetal:
> 
> Bare-metal traces have been removed.
My attempt to resolve a conflict with this line has caused confusion.
I had not noticed that the Bare-metal patch had also updated the doc's, and referred to the original MSWord document.
> 
> --
> Thomas

Bernard.

^ permalink raw reply	[flat|nested] 42+ messages in thread

end of thread, other threads:[~2014-12-04 11:27 UTC | newest]

Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-15 19:13 [dpdk-dev] [PATCH 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
2014-11-15 19:13 ` [dpdk-dev] [PATCH 1/4] doc: Added new commands in testpmd UG Pablo de Lara
2014-11-15 19:13 ` [dpdk-dev] [PATCH 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
2014-11-15 19:19   ` Jayakumar, Muthurajan
2014-11-17 10:39   ` Olivier MATZ
2014-11-17 10:47     ` De Lara Guarch, Pablo
2014-11-26 12:41       ` Thomas Monjalon
2014-11-26 13:26         ` De Lara Guarch, Pablo
2014-11-15 19:13 ` [dpdk-dev] [PATCH 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
2014-11-15 19:13 ` [dpdk-dev] [PATCH 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
2014-12-03 13:17   ` Thomas Monjalon
2014-12-03 13:26     ` De Lara Guarch, Pablo
2014-12-03 13:38       ` Thomas Monjalon
2014-12-04 11:27     ` Iremonger, Bernard
2014-11-18 17:04 ` [dpdk-dev] [PATCH v2 0/4] doc: Updated testpmd UG due to latest changes in the app Pablo de Lara
2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG Pablo de Lara
2014-11-19 13:40     ` Iremonger, Bernard
2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
2014-11-19 13:42     ` Iremonger, Bernard
2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
2014-11-19 13:48     ` Iremonger, Bernard
2014-11-18 17:04   ` [dpdk-dev] [PATCH v2 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
2014-11-19 13:50     ` Iremonger, Bernard
2014-11-27 16:49   ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management Pablo de Lara
2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 1/4] doc: Added new commands in testpmd UG Pablo de Lara
2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
2014-11-27 16:49     ` [dpdk-dev] [PATCH v3 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
2014-11-27 16:52     ` [dpdk-dev] [PATCH v3 0/4] new sample app UG for VM power management De Lara Guarch, Pablo
2014-11-27 19:47     ` [dpdk-dev] [PATCH v4 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 1/4] doc: Added new commands in testpmd UG Pablo de Lara
2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
2014-11-27 19:47       ` [dpdk-dev] [PATCH v4 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
2014-12-01 11:40       ` [dpdk-dev] [PATCH v5 0/4] Updated testpmd UG due to latest changes in the app Pablo de Lara
2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 1/4] doc: Added new commands in testpmd UG Pablo de Lara
2014-12-01 12:32           ` Iremonger, Bernard
2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 2/4] doc: Corrected info for tx_checksum set mask function, " Pablo de Lara
2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 3/4] doc: Moved commands in testpmd UG to match testpmd command help order Pablo de Lara
2014-12-01 12:36           ` Iremonger, Bernard
2014-12-01 11:40         ` [dpdk-dev] [PATCH v5 4/4] doc: Various document fixes in testpmd UG Pablo de Lara
2014-12-01 12:37           ` Iremonger, Bernard

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git