[PATCH v9 07/12] net/nfp: add flower ctrl VNIC related logics

[Chaoyong He <chaoyong.he@corigine.com>]

Adds the setup/start logic for the ctrl vNIC. This vNIC is used by
the PMD and flower firmware application as a communication channel
between driver and firmware. In the case of OVS it is also used to
communicate flow statistics from hardware to the driver.

A rte_eth device is not exposed to DPDK for this vNIC as it is strictly
used internally by flower logic.

Because of the add of ctrl vNIC, a new PCItoCPPBar is needed. Modify the
related logics.

Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
---
 drivers/net/nfp/flower/nfp_flower.c        | 220 +++++++++++++++++++++++++++++
 drivers/net/nfp/flower/nfp_flower.h        |   6 +
 drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c |  31 ++--
 3 files changed, 245 insertions(+), 12 deletions(-)

diff --git a/drivers/net/nfp/flower/nfp_flower.c b/drivers/net/nfp/flower/nfp_flower.c
index 24aa288..18ffa5c 100644
--- a/drivers/net/nfp/flower/nfp_flower.c
+++ b/drivers/net/nfp/flower/nfp_flower.c
@@ -27,6 +27,7 @@
 #define DEFAULT_FLBUF_SIZE 9216
 
 #define PF_VNIC_NB_DESC 1024
+#define CTRL_VNIC_NB_DESC 512
 
 static const struct rte_eth_rxconf rx_conf = {
 	.rx_free_thresh = DEFAULT_RX_FREE_THRESH,
@@ -206,6 +207,11 @@
 	.dev_close              = nfp_flower_pf_close,
 };
 
+static const struct eth_dev_ops nfp_flower_ctrl_vnic_ops = {
+	.dev_infos_get          = nfp_net_infos_get,
+	.dev_configure          = nfp_net_configure,
+};
+
 struct dp_packet {
 	struct rte_mbuf mbuf;
 	uint32_t source;
@@ -496,12 +502,192 @@ struct dp_packet {
 	return 0;
 }
 
+static int
+nfp_flower_init_ctrl_vnic(struct nfp_net_hw *hw)
+{
+	uint32_t i;
+	int ret = 0;
+	uint16_t n_txq;
+	uint16_t n_rxq;
+	unsigned int numa_node;
+	struct rte_mempool *mp;
+	struct nfp_pf_dev *pf_dev;
+	struct rte_eth_dev *eth_dev;
+	struct nfp_app_fw_flower *app_fw_flower;
+
+	/* Set up some pointers here for ease of use */
+	pf_dev = hw->pf_dev;
+	app_fw_flower = NFP_PRIV_TO_APP_FW_FLOWER(pf_dev->app_fw_priv);
+
+	ret = nfp_flower_init_vnic_common(hw, "ctrl_vnic");
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Could not init pf vnic");
+		return -EINVAL;
+	}
+
+	/* Allocate memory for the eth_dev of the vNIC */
+	hw->eth_dev = rte_eth_dev_allocate("nfp_ctrl_vnic");
+	if (hw->eth_dev == NULL) {
+		PMD_INIT_LOG(ERR, "Could not allocate ctrl vnic");
+		return -ENOMEM;
+	}
+
+	/* Grab the pointer to the newly created rte_eth_dev here */
+	eth_dev = hw->eth_dev;
+
+	numa_node = rte_socket_id();
+
+	/* Create a mbuf pool for the ctrl vNIC */
+	app_fw_flower->ctrl_pktmbuf_pool = rte_pktmbuf_pool_create("ctrl_mbuf_pool",
+			4 * CTRL_VNIC_NB_DESC, 64, 0, 9216, numa_node);
+	if (app_fw_flower->ctrl_pktmbuf_pool == NULL) {
+		PMD_INIT_LOG(ERR, "create mbuf pool for ctrl vnic failed");
+		ret = -ENOMEM;
+		goto port_release;
+	}
+
+	mp = app_fw_flower->ctrl_pktmbuf_pool;
+
+	eth_dev->dev_ops = &nfp_flower_ctrl_vnic_ops;
+	rte_eth_dev_probing_finish(eth_dev);
+
+	/* Configure the ctrl vNIC device */
+	n_rxq = hw->max_rx_queues;
+	n_txq = hw->max_tx_queues;
+	eth_dev->data->rx_queues = rte_zmalloc("ethdev->rx_queues",
+		sizeof(eth_dev->data->rx_queues[0]) * n_rxq,
+		RTE_CACHE_LINE_SIZE);
+	if (eth_dev->data->rx_queues == NULL) {
+		PMD_INIT_LOG(ERR, "rte_zmalloc failed for ctrl vNIC rx queues");
+		ret = -ENOMEM;
+		goto mempool_cleanup;
+	}
+
+	eth_dev->data->tx_queues = rte_zmalloc("ethdev->tx_queues",
+		sizeof(eth_dev->data->tx_queues[0]) * n_txq,
+		RTE_CACHE_LINE_SIZE);
+	if (eth_dev->data->tx_queues == NULL) {
+		PMD_INIT_LOG(ERR, "rte_zmalloc failed for ctrl vNIC tx queues");
+		ret = -ENOMEM;
+		goto rx_queue_free;
+	}
+
+	/* Fill in some of the eth_dev fields */
+	eth_dev->device = &pf_dev->pci_dev->device;
+	eth_dev->data->nb_tx_queues = n_rxq;
+	eth_dev->data->nb_rx_queues = n_txq;
+	eth_dev->data->dev_private = hw;
+
+	/* Set up the Rx queues */
+	for (i = 0; i < n_rxq; i++) {
+		ret = nfp_net_rx_queue_setup(eth_dev, i, CTRL_VNIC_NB_DESC, numa_node,
+				&rx_conf, mp);
+		if (ret != 0) {
+			PMD_INIT_LOG(ERR, "Configure ctrl vNIC Rx queue %d failed", i);
+			goto rx_queue_cleanup;
+		}
+	}
+
+	/* Set up the Tx queues */
+	for (i = 0; i < n_txq; i++) {
+		ret = nfp_net_nfd3_tx_queue_setup(eth_dev, i, CTRL_VNIC_NB_DESC, numa_node,
+				&tx_conf);
+		if (ret != 0) {
+			PMD_INIT_LOG(ERR, "Configure ctrl vNIC Tx queue %d failed", i);
+			goto tx_queue_cleanup;
+		}
+	}
+
+	return 0;
+
+tx_queue_cleanup:
+	for (i = 0; i < n_txq; i++)
+		nfp_net_tx_queue_release(eth_dev, i);
+rx_queue_cleanup:
+	for (i = 0; i < n_rxq; i++)
+		nfp_net_rx_queue_release(eth_dev, i);
+	rte_free(eth_dev->data->tx_queues);
+rx_queue_free:
+	rte_free(eth_dev->data->rx_queues);
+mempool_cleanup:
+	rte_mempool_free(mp);
+port_release:
+	rte_eth_dev_release_port(hw->eth_dev);
+
+	return ret;
+}
+
+static void
+nfp_flower_cleanup_ctrl_vnic(struct nfp_net_hw *hw)
+{
+	uint32_t i;
+	struct nfp_app_fw_flower *app_fw_flower;
+
+	app_fw_flower = NFP_PRIV_TO_APP_FW_FLOWER(hw->pf_dev->app_fw_priv);
+
+	for (i = 0; i < hw->max_tx_queues; i++)
+		nfp_net_tx_queue_release(hw->eth_dev, i);
+
+	for (i = 0; i < hw->max_rx_queues; i++)
+		nfp_net_rx_queue_release(hw->eth_dev, i);
+
+	rte_free(hw->eth_dev->data->tx_queues);
+	rte_free(hw->eth_dev->data->rx_queues);
+	rte_mempool_free(app_fw_flower->ctrl_pktmbuf_pool);
+	rte_eth_dev_release_port(hw->eth_dev);
+}
+
+static int
+nfp_flower_start_ctrl_vnic(struct nfp_net_hw *hw)
+{
+	int ret;
+	uint32_t update;
+	uint32_t new_ctrl;
+	struct rte_eth_dev *dev;
+
+	dev = hw->eth_dev;
+
+	/* Disabling queues just in case... */
+	nfp_net_disable_queues(dev);
+
+	/* Enabling the required queues in the device */
+	nfp_net_enable_queues(dev);
+
+	/* Writing configuration parameters in the device */
+	nfp_net_params_setup(hw);
+
+	new_ctrl = NFP_NET_CFG_CTRL_ENABLE;
+	update = NFP_NET_CFG_UPDATE_GEN | NFP_NET_CFG_UPDATE_RING |
+			NFP_NET_CFG_UPDATE_MSIX;
+
+	rte_wmb();
+
+	/* If an error when reconfig we avoid to change hw state */
+	ret = nfp_net_reconfig(hw, new_ctrl, update);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Failed to reconfig ctrl vnic");
+		return -EIO;
+	}
+
+	hw->ctrl = new_ctrl;
+
+	/* Setup the freelist ring */
+	ret = nfp_net_rx_freelist_setup(dev);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Error with flower ctrl vNIC freelist setup");
+		return -EIO;
+	}
+
+	return 0;
+}
+
 int
 nfp_init_app_fw_flower(struct nfp_pf_dev *pf_dev)
 {
 	int ret;
 	unsigned int numa_node;
 	struct nfp_net_hw *pf_hw;
+	struct nfp_net_hw *ctrl_hw;
 	struct nfp_app_fw_flower *app_fw_flower;
 
 	numa_node = rte_socket_id();
@@ -561,8 +747,42 @@ struct dp_packet {
 		goto pf_vnic_cleanup;
 	}
 
+	/* The ctrl vNIC struct comes directly after the PF one */
+	app_fw_flower->ctrl_hw = pf_hw + 1;
+	ctrl_hw = app_fw_flower->ctrl_hw;
+
+	/* Map the ctrl vNIC ctrl bar */
+	ctrl_hw->ctrl_bar = nfp_rtsym_map(pf_dev->sym_tbl, "_pf0_net_ctrl_bar",
+		32768, &ctrl_hw->ctrl_area);
+	if (ctrl_hw->ctrl_bar == NULL) {
+		PMD_INIT_LOG(ERR, "Cloud not map the ctrl vNIC ctrl bar");
+		ret = -ENODEV;
+		goto pf_vnic_cleanup;
+	}
+
+	/* Now populate the ctrl vNIC */
+	ctrl_hw->pf_dev = pf_dev;
+	ctrl_hw->cpp = pf_dev->cpp;
+
+	ret = nfp_flower_init_ctrl_vnic(app_fw_flower->ctrl_hw);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Could not initialize flower ctrl vNIC");
+		goto ctrl_cpp_area_cleanup;
+	}
+
+	/* Start the ctrl vNIC */
+	ret = nfp_flower_start_ctrl_vnic(app_fw_flower->ctrl_hw);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Could not start flower ctrl vNIC");
+		goto ctrl_vnic_cleanup;
+	}
+
 	return 0;
 
+ctrl_vnic_cleanup:
+	nfp_flower_cleanup_ctrl_vnic(app_fw_flower->ctrl_hw);
+ctrl_cpp_area_cleanup:
+	nfp_cpp_area_free(ctrl_hw->ctrl_area);
 pf_vnic_cleanup:
 	nfp_flower_cleanup_pf_vnic(app_fw_flower->pf_hw);
 pf_cpp_area_cleanup:
diff --git a/drivers/net/nfp/flower/nfp_flower.h b/drivers/net/nfp/flower/nfp_flower.h
index 981d88d..e18703e 100644
--- a/drivers/net/nfp/flower/nfp_flower.h
+++ b/drivers/net/nfp/flower/nfp_flower.h
@@ -14,6 +14,12 @@ struct nfp_app_fw_flower {
 	/* Pointer to the PF vNIC */
 	struct nfp_net_hw *pf_hw;
 
+	/* Pointer to a mempool for the ctrlvNIC */
+	struct rte_mempool *ctrl_pktmbuf_pool;
+
+	/* Pointer to the ctrl vNIC */
+	struct nfp_net_hw *ctrl_hw;
+
 	/* the eth table as reported by firmware */
 	struct nfp_eth_table *nfp_eth_table;
 };
diff --git a/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c b/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c
index 08bc4e8..22c8bc4 100644
--- a/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c
+++ b/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c
@@ -91,7 +91,10 @@
  * @refcnt:	number of current users
  * @iomem:	mapped IO memory
  */
+#define NFP_BAR_MIN 1
+#define NFP_BAR_MID 5
 #define NFP_BAR_MAX 7
+
 struct nfp_bar {
 	struct nfp_pcie_user *nfp;
 	uint32_t barcfg;
@@ -292,6 +295,7 @@ struct nfp_pcie_user {
  * BAR0.0: Reserved for General Mapping (for MSI-X access to PCIe SRAM)
  *
  *         Halving PCItoCPPBars for primary and secondary processes.
+ *         For CoreNIC firmware:
  *         NFP PMD just requires two fixed slots, one for configuration BAR,
  *         and another for accessing the hw queues. Another slot is needed
  *         for setting the link up or down. Secondary processes do not need
@@ -301,6 +305,9 @@ struct nfp_pcie_user {
  *         supported. Due to this requirement and future extensions requiring
  *         new slots per process, only one secondary process is supported by
  *         now.
+ *         For Flower firmware:
+ *         NFP PMD need another fixed slots, used as the configureation BAR
+ *         for ctrl vNIC.
  */
 static int
 nfp_enable_bars(struct nfp_pcie_user *nfp)
@@ -309,11 +316,11 @@ struct nfp_pcie_user {
 	int x, start, end;
 
 	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
-		start = 4;
-		end = 1;
+		start = NFP_BAR_MID;
+		end = NFP_BAR_MIN;
 	} else {
-		start = 7;
-		end = 4;
+		start = NFP_BAR_MAX;
+		end = NFP_BAR_MID;
 	}
 	for (x = start; x > end; x--) {
 		bar = &nfp->bar[x - 1];
@@ -341,11 +348,11 @@ struct nfp_pcie_user {
 	int x, start, end;
 
 	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
-		start = 4;
-		end = 1;
+		start = NFP_BAR_MID;
+		end = NFP_BAR_MIN;
 	} else {
-		start = 7;
-		end = 4;
+		start = NFP_BAR_MAX;
+		end = NFP_BAR_MID;
 	}
 	for (x = start; x > end; x--) {
 		bar = &nfp->bar[x - 1];
@@ -364,11 +371,11 @@ struct nfp_pcie_user {
 	int x, start, end;
 
 	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
-		start = 4;
-		end = 1;
+		start = NFP_BAR_MID;
+		end = NFP_BAR_MIN;
 	} else {
-		start = 7;
-		end = 4;
+		start = NFP_BAR_MAX;
+		end = NFP_BAR_MID;
 	}
 
 	for (x = start; x > end; x--) {
-- 
1.8.3.1