From: Andy Pei <andy.pei@intel.com>
To: dev@dpdk.org
Cc: chenbo.xia@intel.com, rosen.xu@intel.com, wei.huang@intel.com,
gang.cao@intel.com, maxime.coquelin@redhat.com
Subject: [PATCH v7 06/12] vdpa/ifc: support dynamic enable/disable queue
Date: Tue, 18 Oct 2022 14:19:31 +0800 [thread overview]
Message-ID: <1666073977-175484-7-git-send-email-andy.pei@intel.com> (raw)
In-Reply-To: <1666073977-175484-1-git-send-email-andy.pei@intel.com>
From: Huang Wei <wei.huang@intel.com>
Support dynamic enable or disable queue.
For front end, like QEMU, user can use ethtool to configure queue.
For example, "ethtool -L eth0 combined 3" to enable 3 queues pairs.
Signed-off-by: Huang Wei <wei.huang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
---
drivers/vdpa/ifc/base/ifcvf.c | 100 ++++++++++++++++++++++++++++++++++++++++++
drivers/vdpa/ifc/base/ifcvf.h | 6 +++
drivers/vdpa/ifc/ifcvf_vdpa.c | 93 ++++++++++++++++++++++++++++++++-------
3 files changed, 184 insertions(+), 15 deletions(-)
diff --git a/drivers/vdpa/ifc/base/ifcvf.c b/drivers/vdpa/ifc/base/ifcvf.c
index 30bb8cb..869ddd6 100644
--- a/drivers/vdpa/ifc/base/ifcvf.c
+++ b/drivers/vdpa/ifc/base/ifcvf.c
@@ -233,6 +233,106 @@
}
}
+int
+ifcvf_enable_vring_hw(struct ifcvf_hw *hw, int i)
+{
+ struct ifcvf_pci_common_cfg *cfg;
+ u8 *lm_cfg;
+ u16 notify_off;
+ int msix_vector;
+
+ if (i >= (int)hw->nr_vring)
+ return -1;
+
+ cfg = hw->common_cfg;
+ if (!cfg) {
+ RTE_LOG(ERR, PMD, "common_cfg in HW is NULL.\n");
+ return -1;
+ }
+
+ ifcvf_enable_mq(hw);
+
+ IFCVF_WRITE_REG16(i, &cfg->queue_select);
+ msix_vector = IFCVF_READ_REG16(&cfg->queue_msix_vector);
+ if (msix_vector != (i + 1)) {
+ IFCVF_WRITE_REG16(i + 1, &cfg->queue_msix_vector);
+ msix_vector = IFCVF_READ_REG16(&cfg->queue_msix_vector);
+ if (msix_vector == IFCVF_MSI_NO_VECTOR) {
+ RTE_LOG(ERR, PMD, "queue %d, msix vec alloc failed\n",
+ i);
+ return -1;
+ }
+ }
+
+ io_write64_twopart(hw->vring[i].desc, &cfg->queue_desc_lo,
+ &cfg->queue_desc_hi);
+ io_write64_twopart(hw->vring[i].avail, &cfg->queue_avail_lo,
+ &cfg->queue_avail_hi);
+ io_write64_twopart(hw->vring[i].used, &cfg->queue_used_lo,
+ &cfg->queue_used_hi);
+ IFCVF_WRITE_REG16(hw->vring[i].size, &cfg->queue_size);
+
+ lm_cfg = hw->lm_cfg;
+ if (lm_cfg) {
+ if (hw->device_type == IFCVF_BLK)
+ *(u32 *)(lm_cfg + IFCVF_LM_RING_STATE_OFFSET +
+ i * IFCVF_LM_CFG_SIZE) =
+ (u32)hw->vring[i].last_avail_idx |
+ ((u32)hw->vring[i].last_used_idx << 16);
+ else
+ *(u32 *)(lm_cfg + IFCVF_LM_RING_STATE_OFFSET +
+ (i / 2) * IFCVF_LM_CFG_SIZE +
+ (i % 2) * 4) =
+ (u32)hw->vring[i].last_avail_idx |
+ ((u32)hw->vring[i].last_used_idx << 16);
+ }
+
+ notify_off = IFCVF_READ_REG16(&cfg->queue_notify_off);
+ hw->notify_addr[i] = (void *)((u8 *)hw->notify_base +
+ notify_off * hw->notify_off_multiplier);
+ IFCVF_WRITE_REG16(1, &cfg->queue_enable);
+
+ return 0;
+}
+
+void
+ifcvf_disable_vring_hw(struct ifcvf_hw *hw, int i)
+{
+ struct ifcvf_pci_common_cfg *cfg;
+ u32 ring_state;
+ u8 *lm_cfg;
+
+ if (i >= (int)hw->nr_vring)
+ return;
+
+ cfg = hw->common_cfg;
+ if (!cfg) {
+ RTE_LOG(ERR, PMD, "common_cfg in HW is NULL.\n");
+ return;
+ }
+
+ IFCVF_WRITE_REG16(i, &cfg->queue_select);
+ IFCVF_WRITE_REG16(0, &cfg->queue_enable);
+
+ lm_cfg = hw->lm_cfg;
+ if (lm_cfg) {
+ if (hw->device_type == IFCVF_BLK) {
+ ring_state = *(u32 *)(lm_cfg +
+ IFCVF_LM_RING_STATE_OFFSET +
+ i * IFCVF_LM_CFG_SIZE);
+ hw->vring[i].last_avail_idx =
+ (u16)(ring_state & IFCVF_16_BIT_MASK);
+ } else {
+ ring_state = *(u32 *)(lm_cfg +
+ IFCVF_LM_RING_STATE_OFFSET +
+ (i / 2) * IFCVF_LM_CFG_SIZE +
+ (i % 2) * 4);
+ hw->vring[i].last_avail_idx = (u16)(ring_state >> 16);
+ }
+ hw->vring[i].last_used_idx = (u16)(ring_state >> 16);
+ }
+}
+
STATIC int
ifcvf_hw_enable(struct ifcvf_hw *hw)
{
diff --git a/drivers/vdpa/ifc/base/ifcvf.h b/drivers/vdpa/ifc/base/ifcvf.h
index 1e133c0..3726da7 100644
--- a/drivers/vdpa/ifc/base/ifcvf.h
+++ b/drivers/vdpa/ifc/base/ifcvf.h
@@ -164,6 +164,12 @@ struct ifcvf_hw {
ifcvf_get_features(struct ifcvf_hw *hw);
int
+ifcvf_enable_vring_hw(struct ifcvf_hw *hw, int i);
+
+void
+ifcvf_disable_vring_hw(struct ifcvf_hw *hw, int i);
+
+int
ifcvf_start_hw(struct ifcvf_hw *hw);
void
diff --git a/drivers/vdpa/ifc/ifcvf_vdpa.c b/drivers/vdpa/ifc/ifcvf_vdpa.c
index 0c3407a..9c49f9c 100644
--- a/drivers/vdpa/ifc/ifcvf_vdpa.c
+++ b/drivers/vdpa/ifc/ifcvf_vdpa.c
@@ -1282,13 +1282,59 @@ struct rte_vdpa_dev_info {
}
static int
+ifcvf_config_vring(struct ifcvf_internal *internal, int vring)
+{
+ struct ifcvf_hw *hw = &internal->hw;
+ int vid = internal->vid;
+ struct rte_vhost_vring vq;
+ uint64_t gpa;
+
+ if (hw->vring[vring].enable) {
+ rte_vhost_get_vhost_vring(vid, vring, &vq);
+ gpa = hva_to_gpa(vid, (uint64_t)(uintptr_t)vq.desc);
+ if (gpa == 0) {
+ DRV_LOG(ERR, "Fail to get GPA for descriptor ring.");
+ return -1;
+ }
+ hw->vring[vring].desc = gpa;
+
+ gpa = hva_to_gpa(vid, (uint64_t)(uintptr_t)vq.avail);
+ if (gpa == 0) {
+ DRV_LOG(ERR, "Fail to get GPA for available ring.");
+ return -1;
+ }
+ hw->vring[vring].avail = gpa;
+
+ gpa = hva_to_gpa(vid, (uint64_t)(uintptr_t)vq.used);
+ if (gpa == 0) {
+ DRV_LOG(ERR, "Fail to get GPA for used ring.");
+ return -1;
+ }
+ hw->vring[vring].used = gpa;
+
+ hw->vring[vring].size = vq.size;
+ rte_vhost_get_vring_base(vid, vring,
+ &hw->vring[vring].last_avail_idx,
+ &hw->vring[vring].last_used_idx);
+ ifcvf_enable_vring_hw(&internal->hw, vring);
+ } else {
+ ifcvf_disable_vring_hw(&internal->hw, vring);
+ rte_vhost_set_vring_base(vid, vring,
+ hw->vring[vring].last_avail_idx,
+ hw->vring[vring].last_used_idx);
+ }
+
+ return 0;
+}
+
+static int
ifcvf_set_vring_state(int vid, int vring, int state)
{
struct rte_vdpa_device *vdev;
struct internal_list *list;
struct ifcvf_internal *internal;
struct ifcvf_hw *hw;
- struct ifcvf_pci_common_cfg *cfg;
+ bool enable = !!state;
int ret = 0;
vdev = rte_vhost_get_vdpa_device(vid);
@@ -1298,6 +1344,9 @@ struct rte_vdpa_dev_info {
return -1;
}
+ DRV_LOG(INFO, "%s queue %d of vDPA device %s",
+ enable ? "enable" : "disable", vring, vdev->device->name);
+
internal = list->internal;
if (vring < 0 || vring >= internal->max_queues * 2) {
DRV_LOG(ERR, "Vring index %d not correct", vring);
@@ -1305,27 +1354,41 @@ struct rte_vdpa_dev_info {
}
hw = &internal->hw;
+ hw->vring[vring].enable = enable;
+
if (!internal->configured)
- goto exit;
+ return 0;
- cfg = hw->common_cfg;
- IFCVF_WRITE_REG16(vring, &cfg->queue_select);
- IFCVF_WRITE_REG16(!!state, &cfg->queue_enable);
+ unset_notify_relay(internal);
- if (!state && hw->vring[vring].enable) {
- ret = vdpa_disable_vfio_intr(internal);
- if (ret)
- return ret;
+ ret = vdpa_enable_vfio_intr(internal, false);
+ if (ret) {
+ DRV_LOG(ERR, "failed to set vfio interrupt of vDPA device %s",
+ vdev->device->name);
+ return ret;
}
- if (state && !hw->vring[vring].enable) {
- ret = vdpa_enable_vfio_intr(internal, false);
- if (ret)
- return ret;
+ ret = ifcvf_config_vring(internal, vring);
+ if (ret) {
+ DRV_LOG(ERR, "failed to configure queue %d of vDPA device %s",
+ vring, vdev->device->name);
+ return ret;
+ }
+
+ ret = setup_notify_relay(internal);
+ if (ret) {
+ DRV_LOG(ERR, "failed to setup notify relay of vDPA device %s",
+ vdev->device->name);
+ return ret;
+ }
+
+ ret = rte_vhost_host_notifier_ctrl(vid, vring, enable);
+ if (ret) {
+ DRV_LOG(ERR, "vDPA device %s queue %d host notifier ctrl fail",
+ vdev->device->name, vring);
+ return ret;
}
-exit:
- hw->vring[vring].enable = !!state;
return 0;
}
--
1.8.3.1
next prev parent reply other threads:[~2022-10-18 6:24 UTC|newest]
Thread overview: 181+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-23 4:34 [PATCH 0/8] add multi queue support to vDPA ifc driver Andy Pei
2022-08-23 4:34 ` [PATCH 1/8] vdpa/ifc: add new device ID Andy Pei
2022-09-08 5:54 ` [PATCH v2 0/8] vdpa/ifc: add multi queue support Andy Pei
2022-09-08 5:54 ` [PATCH v2 1/8] vdpa/ifc: add new device ID Andy Pei
2022-09-09 0:29 ` Xia, Chenbo
2022-09-09 7:44 ` Pei, Andy
2022-09-08 5:54 ` [PATCH v2 2/8] vdpa/ifc: add multi queue support Andy Pei
2022-09-09 0:29 ` Xia, Chenbo
2022-09-09 7:55 ` Pei, Andy
2022-09-08 5:54 ` [PATCH v2 3/8] vdpa/ifc: set max queues according to HW spec Andy Pei
2022-09-09 5:56 ` Xia, Chenbo
2022-09-14 3:59 ` Pei, Andy
2022-09-08 5:54 ` [PATCH v2 4/8] vdpa/ifc: write queue count to MQ register Andy Pei
2022-09-09 7:35 ` Xia, Chenbo
2022-09-09 8:31 ` Pei, Andy
2022-09-08 5:54 ` [PATCH v2 5/8] vdpa/ifc: only configure enabled queue Andy Pei
2022-09-14 1:59 ` Xia, Chenbo
2022-09-14 2:57 ` Huang, Wei
2022-09-08 5:54 ` [PATCH v2 6/8] vdpa/ifc: support dynamic enable/disable queue Andy Pei
2022-09-14 2:23 ` Xia, Chenbo
2022-09-14 3:04 ` Huang, Wei
2022-09-14 3:14 ` Xia, Chenbo
2022-09-14 5:29 ` Pei, Andy
2022-09-08 5:54 ` [PATCH v2 7/8] vhost: configure device when any queue is ready for BLK device Andy Pei
2022-09-14 2:50 ` Xia, Chenbo
2022-09-14 7:01 ` Pei, Andy
2022-09-08 5:54 ` [PATCH v2 8/8] vhost: vDPA BLK devices configure device when all queue callfds are set Andy Pei
2022-09-16 6:16 ` [PATCH v3 0/8] vdpa/ifc: add multi queue support Andy Pei
2022-09-16 6:16 ` [PATCH v3 1/8] vdpa/ifc: add new device ID for legacy network device Andy Pei
2022-10-11 16:49 ` Maxime Coquelin
2022-10-12 6:33 ` Pei, Andy
2022-10-12 2:59 ` Xia, Chenbo
2022-10-12 6:34 ` Pei, Andy
2022-09-16 6:16 ` [PATCH v3 2/8] vdpa/ifc: add multi-queue support Andy Pei
2022-10-12 3:01 ` Xia, Chenbo
2022-10-12 7:25 ` Pei, Andy
2022-09-16 6:16 ` [PATCH v3 3/8] vdpa/ifc: set max queues based on virtio spec Andy Pei
2022-10-12 6:08 ` Xia, Chenbo
2022-10-12 7:22 ` Pei, Andy
2022-10-12 7:22 ` Pei, Andy
2022-09-16 6:16 ` [PATCH v3 4/8] vdpa/ifc: write queue count to MQ register Andy Pei
2022-10-12 8:08 ` Xia, Chenbo
2022-10-12 8:14 ` Pei, Andy
2022-09-16 6:16 ` [PATCH v3 5/8] vdpa/ifc: only configure enabled queue Andy Pei
2022-10-12 8:12 ` Xia, Chenbo
2022-10-12 8:37 ` Pei, Andy
2022-09-16 6:16 ` [PATCH v3 6/8] vdpa/ifc: support dynamic enable/disable queue Andy Pei
2022-10-12 8:19 ` Xia, Chenbo
2022-10-12 11:00 ` Pei, Andy
2022-09-16 6:16 ` [PATCH v3 7/8] vhost: vDPA blk device gets ready when any queue is ready Andy Pei
2022-10-12 9:09 ` Xia, Chenbo
2022-10-12 12:13 ` Pei, Andy
2022-10-13 1:00 ` Xia, Chenbo
2022-10-13 3:05 ` Pei, Andy
2022-10-13 7:16 ` Maxime Coquelin
2022-10-13 9:00 ` Pei, Andy
2022-09-16 6:16 ` [PATCH v3 8/8] vhost: improve vDPA blk device readiness condition Andy Pei
2022-10-12 9:35 ` Xia, Chenbo
2022-10-13 7:55 ` Pei, Andy
2022-10-13 8:23 ` Pei, Andy
2022-10-13 8:44 ` [PATCH v4 0/8] vdpa/ifc: add multi queue support Andy Pei
2022-10-13 8:44 ` [PATCH v4 1/8] vdpa/ifc: add new device ID for legacy network device Andy Pei
2022-10-13 8:44 ` [PATCH v4 2/8] vdpa/ifc: add multi-queue support Andy Pei
2022-10-17 6:21 ` Xia, Chenbo
2022-10-17 6:28 ` Pei, Andy
2022-10-13 8:44 ` [PATCH v4 3/8] vdpa/ifc: set max queues based on virtio spec Andy Pei
2022-10-17 6:22 ` Xia, Chenbo
2022-10-17 6:29 ` Pei, Andy
2022-10-13 8:44 ` [PATCH v4 4/8] vdpa/ifc: write queue count to MQ register Andy Pei
2022-10-17 6:23 ` Xia, Chenbo
2022-10-17 6:36 ` Pei, Andy
2022-10-13 8:44 ` [PATCH v4 5/8] vdpa/ifc: only configure enabled queue Andy Pei
2022-10-17 6:24 ` Xia, Chenbo
2022-10-17 6:38 ` Pei, Andy
2022-10-13 8:44 ` [PATCH v4 6/8] vdpa/ifc: support dynamic enable/disable queue Andy Pei
2022-10-17 6:26 ` Xia, Chenbo
2022-10-17 6:41 ` Pei, Andy
2022-10-13 8:44 ` [PATCH v4 7/8] vhost: vDPA blk device gets ready when any queue is ready Andy Pei
2022-10-17 6:34 ` Xia, Chenbo
2022-10-17 6:43 ` Pei, Andy
2022-10-13 8:44 ` [PATCH v4 8/8] vhost: improve vDPA blk device configure condition Andy Pei
2022-10-17 6:35 ` Xia, Chenbo
2022-10-17 7:12 ` Pei, Andy
2022-10-17 7:13 ` [PATCH v5 0/8] vdpa/ifc: add multi queue support Andy Pei
2022-10-17 7:13 ` [PATCH v5 1/8] vdpa/ifc: add new device ID for legacy network device Andy Pei
2022-10-17 7:13 ` [PATCH v5 2/8] vdpa/ifc: add multi-queue support Andy Pei
2022-10-17 7:13 ` [PATCH v5 3/8] vdpa/ifc: set max queues based on virtio spec Andy Pei
2022-10-17 7:13 ` [PATCH v5 4/8] vdpa/ifc: write queue count to MQ register Andy Pei
2022-10-17 7:13 ` [PATCH v5 5/8] vdpa/ifc: only configure enabled queue Andy Pei
2022-10-17 7:13 ` [PATCH v5 6/8] vdpa/ifc: support dynamic enable/disable queue Andy Pei
2022-10-17 7:13 ` [PATCH v5 7/8] vhost: vDPA blk device gets ready when the first queue is ready Andy Pei
2022-10-17 7:54 ` Xia, Chenbo
2022-10-17 8:36 ` Maxime Coquelin
2022-10-17 8:42 ` Xia, Chenbo
2022-10-17 8:46 ` Maxime Coquelin
2022-10-17 7:13 ` [PATCH v5 8/8] vhost: improve vDPA blk device configure condition Andy Pei
2022-10-17 11:41 ` [PATCH v6 0/8] vdpa/ifc: add multi queue support Andy Pei
2022-10-17 11:41 ` [PATCH v6 1/8] vdpa/ifc: add new device ID for legacy network device Andy Pei
2022-10-17 11:41 ` [PATCH v6 2/8] vdpa/ifc: add multi-queue support Andy Pei
2022-10-17 11:41 ` [PATCH v6 3/8] vdpa/ifc: set max queues based on virtio spec Andy Pei
2022-10-17 11:41 ` [PATCH v6 4/8] vdpa/ifc: write queue count to MQ register Andy Pei
2022-10-17 11:41 ` [PATCH v6 5/8] vdpa/ifc: only configure enabled queue Andy Pei
2022-10-17 11:41 ` [PATCH v6 6/8] vdpa/ifc: support dynamic enable/disable queue Andy Pei
2022-10-17 11:41 ` [PATCH v6 7/8] vhost: vDPA blk device gets ready when the first queue is ready Andy Pei
2022-10-17 11:41 ` [PATCH v6 8/8] vhost: improve vDPA blk device configure condition Andy Pei
2022-10-18 6:19 ` [PATCH v7 00/12] vdpa/ifc: add multi queue support Andy Pei
2022-10-18 6:19 ` [PATCH v7 01/12] vdpa/ifc: add new device ID for legacy network device Andy Pei
2022-10-18 6:19 ` [PATCH v7 02/12] vdpa/ifc: add multi-queue support Andy Pei
2022-10-18 6:19 ` [PATCH v7 03/12] vdpa/ifc: set max queues based on virtio spec Andy Pei
2022-10-18 6:19 ` [PATCH v7 04/12] vdpa/ifc: write queue count to MQ register Andy Pei
2022-10-18 6:19 ` [PATCH v7 05/12] vdpa/ifc: only configure enabled queue Andy Pei
2022-10-18 6:19 ` Andy Pei [this message]
2022-10-18 6:19 ` [PATCH v7 07/12] vdpa/ifc: change internal function name Andy Pei
2022-10-18 6:19 ` [PATCH v7 08/12] vdpa/ifc: add internal API to get device Andy Pei
2022-10-18 6:19 ` [PATCH v7 09/12] vdpa/ifc: change some driver logic Andy Pei
2022-10-18 6:19 ` [PATCH v7 10/12] vhost: add vdpa device type to rte vdpa device Andy Pei
2022-10-18 7:14 ` Maxime Coquelin
2022-10-18 12:14 ` Pei, Andy
2022-10-19 9:14 ` Xia, Chenbo
2022-10-19 9:19 ` Pei, Andy
2022-10-18 6:19 ` [PATCH v7 11/12] vhost: vDPA blk device gets ready when the first queue is ready Andy Pei
2022-10-18 6:19 ` [PATCH v7 12/12] vhost: improve vDPA blk device configure condition Andy Pei
2022-10-18 12:07 ` [PATCH v8 00/12] vdpa/ifc: add multi queue support Andy Pei
2022-10-18 12:07 ` [PATCH v8 01/12] vdpa/ifc: add new device ID for legacy network device Andy Pei
2022-10-18 12:07 ` [PATCH v8 02/12] vdpa/ifc: add multi-queue support Andy Pei
2022-10-18 12:07 ` [PATCH v8 03/12] vdpa/ifc: set max queues based on virtio spec Andy Pei
2022-10-18 12:07 ` [PATCH v8 04/12] vdpa/ifc: write queue count to MQ register Andy Pei
2022-10-18 12:07 ` [PATCH v8 05/12] vdpa/ifc: only configure enabled queue Andy Pei
2022-10-18 12:07 ` [PATCH v8 06/12] vdpa/ifc: support dynamic enable/disable queue Andy Pei
2022-10-18 12:07 ` [PATCH v8 07/12] vdpa/ifc: change internal function name Andy Pei
2022-10-18 13:44 ` Maxime Coquelin
2022-10-18 13:47 ` Pei, Andy
2022-10-19 6:59 ` Xia, Chenbo
2022-10-19 9:41 ` Pei, Andy
2022-10-18 12:07 ` [PATCH v8 08/12] vdpa/ifc: add internal API to get device Andy Pei
2022-10-18 13:48 ` Maxime Coquelin
2022-10-18 13:52 ` Pei, Andy
2022-10-19 7:03 ` Xia, Chenbo
2022-10-19 9:40 ` Pei, Andy
2022-10-18 12:07 ` [PATCH v8 09/12] vdpa/ifc: change some driver logic Andy Pei
2022-10-18 13:57 ` Maxime Coquelin
2022-10-18 14:01 ` Pei, Andy
2022-10-19 9:13 ` Xia, Chenbo
2022-10-19 9:21 ` Pei, Andy
2022-10-18 12:07 ` [PATCH v8 10/12] vhost: add type to rte vdpa device Andy Pei
2022-10-18 13:15 ` Maxime Coquelin
2022-10-18 13:42 ` Pei, Andy
2022-10-18 12:07 ` [PATCH v8 11/12] vhost: vDPA blk device gets ready when the first queue is ready Andy Pei
2022-10-18 14:09 ` Maxime Coquelin
2022-10-18 14:11 ` Pei, Andy
2022-10-19 9:14 ` Xia, Chenbo
2022-10-19 9:18 ` Pei, Andy
2022-10-18 12:07 ` [PATCH v8 12/12] vhost: improve vDPA blk device configure condition Andy Pei
2022-10-18 14:14 ` Maxime Coquelin
2022-10-18 14:16 ` Pei, Andy
2022-10-19 9:15 ` Xia, Chenbo
2022-10-19 9:19 ` Pei, Andy
2022-10-19 8:41 ` [PATCH v9 00/12] vdpa/ifc: add multi queue support Andy Pei
2022-10-19 8:41 ` [PATCH v9 01/12] vdpa/ifc: add new device ID for legacy network device Andy Pei
2022-10-19 8:41 ` [PATCH v9 02/12] vdpa/ifc: add multi-queue support Andy Pei
2022-10-19 8:41 ` [PATCH v9 03/12] vdpa/ifc: set max queues based on virtio spec Andy Pei
2022-10-19 8:41 ` [PATCH v9 04/12] vdpa/ifc: write queue count to MQ register Andy Pei
2022-10-19 8:41 ` [PATCH v9 05/12] vdpa/ifc: only configure enabled queue Andy Pei
2022-10-19 8:41 ` [PATCH v9 06/12] vdpa/ifc: support dynamic enable/disable queue Andy Pei
2022-10-19 8:41 ` [PATCH v9 07/12] vdpa/ifc: change internal function name Andy Pei
2022-10-19 8:41 ` [PATCH v9 08/12] vdpa/ifc: add internal API to get device Andy Pei
2022-10-19 8:41 ` [PATCH v9 09/12] vdpa/ifc: improve internal list logic Andy Pei
2022-10-20 3:21 ` Xia, Chenbo
2022-10-20 5:53 ` Pei, Andy
2022-10-19 8:41 ` [PATCH v9 10/12] vhost: add type to rte vdpa device Andy Pei
2022-10-19 8:41 ` [PATCH v9 11/12] vhost: vDPA blk device gets ready when the first queue is ready Andy Pei
2022-10-19 8:41 ` [PATCH v9 12/12] vhost: improve vDPA blk device configure condition Andy Pei
2022-10-26 9:00 ` [PATCH v9 00/12] vdpa/ifc: add multi queue support Xia, Chenbo
2022-10-26 9:26 ` Pei, Andy
2022-08-23 4:34 ` [PATCH 2/8] vdpa/ifc: add multi queue suppoort Andy Pei
2022-08-23 4:35 ` [PATCH 3/8] vdpa/ifc: set max queues according to HW spec Andy Pei
2022-08-23 4:35 ` [PATCH 4/8] vdpa/ifc: write queue count to MQ register Andy Pei
2022-08-23 4:35 ` [PATCH 5/8] vdpa/ifc: only configure enabled queue Andy Pei
2022-08-23 4:35 ` [PATCH 6/8] vdpa/ifc: set vring state callback update data path Andy Pei
2022-08-23 4:35 ` [PATCH 7/8] vhost: configure device when any queue is ready for BLK device Andy Pei
2022-08-23 4:35 ` [PATCH 8/8] vhost: vDPA BLK devices configure device when all queue callfds are set Andy Pei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1666073977-175484-7-git-send-email-andy.pei@intel.com \
--to=andy.pei@intel.com \
--cc=chenbo.xia@intel.com \
--cc=dev@dpdk.org \
--cc=gang.cao@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=rosen.xu@intel.com \
--cc=wei.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).