From: Tyler Retzlaff <roretzla@linux.microsoft.com>
To: dev@dpdk.org
Cc: Akhil Goyal <gakhil@marvell.com>,
Anatoly Burakov <anatoly.burakov@intel.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
Bruce Richardson <bruce.richardson@intel.com>,
Chenbo Xia <chenbo.xia@intel.com>,
Ciara Power <ciara.power@intel.com>,
David Christensen <drc@linux.vnet.ibm.com>,
David Hunt <david.hunt@intel.com>,
Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>,
Dmitry Malloy <dmitrym@microsoft.com>,
Elena Agostini <eagostini@nvidia.com>,
Erik Gabriel Carrillo <erik.g.carrillo@intel.com>,
Fan Zhang <fanzhang.oss@gmail.com>,
Ferruh Yigit <ferruh.yigit@amd.com>,
Harman Kalra <hkalra@marvell.com>,
Harry van Haaren <harry.van.haaren@intel.com>,
Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>,
Jerin Jacob <jerinj@marvell.com>,
Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>,
Matan Azrad <matan@nvidia.com>,
Maxime Coquelin <maxime.coquelin@redhat.com>,
Narcisa Ana Maria Vasile <navasile@linux.microsoft.com>,
Nicolas Chautru <nicolas.chautru@intel.com>,
Olivier Matz <olivier.matz@6wind.com>, Ori Kam <orika@nvidia.com>,
Pallavi Kadam <pallavi.kadam@intel.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>,
Reshma Pattan <reshma.pattan@intel.com>,
Sameh Gobriel <sameh.gobriel@intel.com>,
Shijith Thotton <sthotton@marvell.com>,
Sivaprasad Tummala <sivaprasad.tummala@amd.com>,
Stephen Hemminger <stephen@networkplumber.org>,
Suanming Mou <suanmingm@nvidia.com>,
Sunil Kumar Kori <skori@marvell.com>,
Thomas Monjalon <thomas@monjalon.net>,
Viacheslav Ovsiienko <viacheslavo@nvidia.com>,
Vladimir Medvedkin <vladimir.medvedkin@intel.com>,
Yipeng Wang <yipeng1.wang@intel.com>,
Tyler Retzlaff <roretzla@linux.microsoft.com>
Subject: [PATCH v2 18/19] timer: use rte optional stdatomic API
Date: Tue, 17 Oct 2023 13:31:16 -0700 [thread overview]
Message-ID: <1697574677-16578-19-git-send-email-roretzla@linux.microsoft.com> (raw)
In-Reply-To: <1697574677-16578-1-git-send-email-roretzla@linux.microsoft.com>
Replace the use of gcc builtin __atomic_xxx intrinsics with
corresponding rte_atomic_xxx optional stdatomic API
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
---
lib/timer/rte_timer.c | 50 +++++++++++++++++++++++++-------------------------
lib/timer/rte_timer.h | 6 +++---
2 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/lib/timer/rte_timer.c b/lib/timer/rte_timer.c
index 85d6757..53ed221 100644
--- a/lib/timer/rte_timer.c
+++ b/lib/timer/rte_timer.c
@@ -210,7 +210,7 @@ struct rte_timer_data {
status.state = RTE_TIMER_STOP;
status.owner = RTE_TIMER_NO_OWNER;
- __atomic_store_n(&tim->status.u32, status.u32, __ATOMIC_RELAXED);
+ rte_atomic_store_explicit(&tim->status.u32, status.u32, rte_memory_order_relaxed);
}
/*
@@ -231,7 +231,7 @@ struct rte_timer_data {
/* wait that the timer is in correct status before update,
* and mark it as being configured */
- prev_status.u32 = __atomic_load_n(&tim->status.u32, __ATOMIC_RELAXED);
+ prev_status.u32 = rte_atomic_load_explicit(&tim->status.u32, rte_memory_order_relaxed);
while (success == 0) {
/* timer is running on another core
@@ -254,11 +254,11 @@ struct rte_timer_data {
* timer is in CONFIG state, the state cannot be changed
* by other threads. So, we should use ACQUIRE here.
*/
- success = __atomic_compare_exchange_n(&tim->status.u32,
- &prev_status.u32,
- status.u32, 0,
- __ATOMIC_ACQUIRE,
- __ATOMIC_RELAXED);
+ success = rte_atomic_compare_exchange_strong_explicit(&tim->status.u32,
+ (uint32_t *)(uintptr_t)&prev_status.u32,
+ status.u32,
+ rte_memory_order_acquire,
+ rte_memory_order_relaxed);
}
ret_prev_status->u32 = prev_status.u32;
@@ -277,7 +277,7 @@ struct rte_timer_data {
/* wait that the timer is in correct status before update,
* and mark it as running */
- prev_status.u32 = __atomic_load_n(&tim->status.u32, __ATOMIC_RELAXED);
+ prev_status.u32 = rte_atomic_load_explicit(&tim->status.u32, rte_memory_order_relaxed);
while (success == 0) {
/* timer is not pending anymore */
@@ -293,11 +293,11 @@ struct rte_timer_data {
* timer is in RUNNING state, the state cannot be changed
* by other threads. So, we should use ACQUIRE here.
*/
- success = __atomic_compare_exchange_n(&tim->status.u32,
- &prev_status.u32,
- status.u32, 0,
- __ATOMIC_ACQUIRE,
- __ATOMIC_RELAXED);
+ success = rte_atomic_compare_exchange_strong_explicit(&tim->status.u32,
+ (uint32_t *)(uintptr_t)&prev_status.u32,
+ status.u32,
+ rte_memory_order_acquire,
+ rte_memory_order_relaxed);
}
return 0;
@@ -530,7 +530,7 @@ struct rte_timer_data {
/* The "RELEASE" ordering guarantees the memory operations above
* the status update are observed before the update by all threads
*/
- __atomic_store_n(&tim->status.u32, status.u32, __ATOMIC_RELEASE);
+ rte_atomic_store_explicit(&tim->status.u32, status.u32, rte_memory_order_release);
if (tim_lcore != lcore_id || !local_is_locked)
rte_spinlock_unlock(&priv_timer[tim_lcore].list_lock);
@@ -612,7 +612,7 @@ struct rte_timer_data {
/* The "RELEASE" ordering guarantees the memory operations above
* the status update are observed before the update by all threads
*/
- __atomic_store_n(&tim->status.u32, status.u32, __ATOMIC_RELEASE);
+ rte_atomic_store_explicit(&tim->status.u32, status.u32, rte_memory_order_release);
return 0;
}
@@ -646,8 +646,8 @@ struct rte_timer_data {
int
rte_timer_pending(struct rte_timer *tim)
{
- return __atomic_load_n(&tim->status.state,
- __ATOMIC_RELAXED) == RTE_TIMER_PENDING;
+ return rte_atomic_load_explicit(&tim->status.state,
+ rte_memory_order_relaxed) == RTE_TIMER_PENDING;
}
/* must be called periodically, run all timer that expired */
@@ -753,8 +753,8 @@ struct rte_timer_data {
* operations above the status update are observed
* before the update by all threads
*/
- __atomic_store_n(&tim->status.u32, status.u32,
- __ATOMIC_RELEASE);
+ rte_atomic_store_explicit(&tim->status.u32, status.u32,
+ rte_memory_order_release);
}
else {
/* keep it in list and mark timer as pending */
@@ -766,8 +766,8 @@ struct rte_timer_data {
* operations above the status update are observed
* before the update by all threads
*/
- __atomic_store_n(&tim->status.u32, status.u32,
- __ATOMIC_RELEASE);
+ rte_atomic_store_explicit(&tim->status.u32, status.u32,
+ rte_memory_order_release);
__rte_timer_reset(tim, tim->expire + tim->period,
tim->period, lcore_id, tim->f, tim->arg, 1,
timer_data);
@@ -941,8 +941,8 @@ struct rte_timer_data {
* operations above the status update are observed
* before the update by all threads
*/
- __atomic_store_n(&tim->status.u32, status.u32,
- __ATOMIC_RELEASE);
+ rte_atomic_store_explicit(&tim->status.u32, status.u32,
+ rte_memory_order_release);
} else {
/* keep it in list and mark timer as pending */
rte_spinlock_lock(
@@ -954,8 +954,8 @@ struct rte_timer_data {
* operations above the status update are observed
* before the update by all threads
*/
- __atomic_store_n(&tim->status.u32, status.u32,
- __ATOMIC_RELEASE);
+ rte_atomic_store_explicit(&tim->status.u32, status.u32,
+ rte_memory_order_release);
__rte_timer_reset(tim, tim->expire + tim->period,
tim->period, this_lcore, tim->f, tim->arg, 1,
data);
diff --git a/lib/timer/rte_timer.h b/lib/timer/rte_timer.h
index d3927d5..a35bc08 100644
--- a/lib/timer/rte_timer.h
+++ b/lib/timer/rte_timer.h
@@ -65,10 +65,10 @@ enum rte_timer_type {
*/
union rte_timer_status {
struct {
- uint16_t state; /**< Stop, pending, running, config. */
- int16_t owner; /**< The lcore that owns the timer. */
+ RTE_ATOMIC(uint16_t) state; /**< Stop, pending, running, config. */
+ RTE_ATOMIC(int16_t) owner; /**< The lcore that owns the timer. */
};
- uint32_t u32; /**< To atomic-set status + owner. */
+ RTE_ATOMIC(uint32_t) u32; /**< To atomic-set status + owner. */
};
#ifdef RTE_LIBRTE_TIMER_DEBUG
--
1.8.3.1
next prev parent reply other threads:[~2023-10-17 20:33 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-16 23:08 [PATCH 00/21] " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 01/21] power: fix use of rte stdatomic Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 02/21] event/cnxk: remove single " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 03/21] power: use rte optional stdatomic API Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 04/21] bbdev: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 05/21] eal: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 06/21] eventdev: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 07/21] gpudev: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 08/21] ipsec: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 09/21] mbuf: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 10/21] mempool: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 11/21] rcu: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 12/21] pdump: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 13/21] stack: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 14/21] telemetry: " Tyler Retzlaff
2023-10-16 23:08 ` [PATCH 15/21] vhost: " Tyler Retzlaff
2023-10-16 23:09 ` [PATCH 16/21] cryptodev: " Tyler Retzlaff
2023-10-16 23:09 ` [PATCH 17/21] distributor: " Tyler Retzlaff
2023-10-16 23:09 ` [PATCH 18/21] ethdev: " Tyler Retzlaff
2023-10-16 23:09 ` [PATCH 19/21] hash: " Tyler Retzlaff
2023-10-16 23:09 ` [PATCH 20/21] timer: " Tyler Retzlaff
2023-10-16 23:09 ` [PATCH 21/21] ring: " Tyler Retzlaff
2023-10-17 20:30 ` [PATCH v2 00/19] " Tyler Retzlaff
2023-10-17 20:30 ` [PATCH v2 01/19] power: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 02/19] bbdev: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 03/19] eal: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 04/19] eventdev: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 05/19] gpudev: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 06/19] ipsec: " Tyler Retzlaff
2023-10-24 8:45 ` Konstantin Ananyev
2023-10-17 20:31 ` [PATCH v2 07/19] mbuf: " Tyler Retzlaff
2023-10-24 8:46 ` Konstantin Ananyev
2023-10-17 20:31 ` [PATCH v2 08/19] mempool: " Tyler Retzlaff
2023-10-24 8:47 ` Konstantin Ananyev
2023-10-17 20:31 ` [PATCH v2 09/19] rcu: " Tyler Retzlaff
2023-10-25 9:41 ` Ruifeng Wang
2023-10-25 22:38 ` Tyler Retzlaff
2023-10-26 4:24 ` Ruifeng Wang
2023-10-26 16:36 ` Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 10/19] pdump: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 11/19] stack: " Tyler Retzlaff
2023-10-24 8:48 ` Konstantin Ananyev
2023-10-17 20:31 ` [PATCH v2 12/19] telemetry: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 13/19] vhost: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 14/19] cryptodev: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 15/19] distributor: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 16/19] ethdev: " Tyler Retzlaff
2023-10-17 20:31 ` [PATCH v2 17/19] hash: " Tyler Retzlaff
2023-10-17 20:31 ` Tyler Retzlaff [this message]
2023-10-17 20:31 ` [PATCH v2 19/19] ring: " Tyler Retzlaff
2023-10-24 8:43 ` Konstantin Ananyev
2023-10-24 9:56 ` Morten Brørup
2023-10-24 15:58 ` Tyler Retzlaff
2023-10-24 16:36 ` Morten Brørup
2023-10-24 16:29 ` Tyler Retzlaff
2023-10-25 10:06 ` Konstantin Ananyev
2023-10-25 22:49 ` Tyler Retzlaff
2023-10-25 23:22 ` Tyler Retzlaff
2023-10-17 23:55 ` [PATCH v2 00/19] " Stephen Hemminger
2023-10-26 0:31 ` [PATCH v3 " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 01/19] power: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 02/19] bbdev: " Tyler Retzlaff
2023-10-26 11:57 ` Maxime Coquelin
2023-10-26 0:31 ` [PATCH v3 03/19] eal: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 04/19] eventdev: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 05/19] gpudev: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 06/19] ipsec: " Tyler Retzlaff
2023-10-26 15:54 ` [EXT] " Akhil Goyal
2023-10-27 12:59 ` Konstantin Ananyev
2023-10-26 0:31 ` [PATCH v3 07/19] mbuf: " Tyler Retzlaff
2023-10-27 13:03 ` Konstantin Ananyev
2023-10-26 0:31 ` [PATCH v3 08/19] mempool: " Tyler Retzlaff
2023-10-27 13:01 ` Konstantin Ananyev
2023-10-26 0:31 ` [PATCH v3 09/19] rcu: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 10/19] pdump: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 11/19] stack: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 12/19] telemetry: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 13/19] vhost: " Tyler Retzlaff
2023-10-26 11:57 ` Maxime Coquelin
2023-10-26 0:31 ` [PATCH v3 14/19] cryptodev: " Tyler Retzlaff
2023-10-26 15:53 ` [EXT] " Akhil Goyal
2023-10-27 13:05 ` Konstantin Ananyev
2023-10-26 0:31 ` [PATCH v3 15/19] distributor: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 16/19] ethdev: " Tyler Retzlaff
2023-10-27 13:04 ` Konstantin Ananyev
2023-10-26 0:31 ` [PATCH v3 17/19] hash: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 18/19] timer: " Tyler Retzlaff
2023-10-26 0:31 ` [PATCH v3 19/19] ring: " Tyler Retzlaff
2023-10-27 12:58 ` Konstantin Ananyev
2023-10-26 13:47 ` [PATCH v3 00/19] " David Marchand
2023-10-30 15:34 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1697574677-16578-19-git-send-email-roretzla@linux.microsoft.com \
--to=roretzla@linux.microsoft.com \
--cc=anatoly.burakov@intel.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=bruce.richardson@intel.com \
--cc=chenbo.xia@intel.com \
--cc=ciara.power@intel.com \
--cc=david.hunt@intel.com \
--cc=dev@dpdk.org \
--cc=dmitry.kozliuk@gmail.com \
--cc=dmitrym@microsoft.com \
--cc=drc@linux.vnet.ibm.com \
--cc=eagostini@nvidia.com \
--cc=erik.g.carrillo@intel.com \
--cc=fanzhang.oss@gmail.com \
--cc=ferruh.yigit@amd.com \
--cc=gakhil@marvell.com \
--cc=harry.van.haaren@intel.com \
--cc=hkalra@marvell.com \
--cc=honnappa.nagarahalli@arm.com \
--cc=jerinj@marvell.com \
--cc=konstantin.v.ananyev@yandex.ru \
--cc=matan@nvidia.com \
--cc=maxime.coquelin@redhat.com \
--cc=navasile@linux.microsoft.com \
--cc=nicolas.chautru@intel.com \
--cc=olivier.matz@6wind.com \
--cc=orika@nvidia.com \
--cc=pallavi.kadam@intel.com \
--cc=pbhagavatula@marvell.com \
--cc=reshma.pattan@intel.com \
--cc=sameh.gobriel@intel.com \
--cc=sivaprasad.tummala@amd.com \
--cc=skori@marvell.com \
--cc=stephen@networkplumber.org \
--cc=sthotton@marvell.com \
--cc=suanmingm@nvidia.com \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
--cc=vladimir.medvedkin@intel.com \
--cc=yipeng1.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).