From: "Zhang, Qi Z" <qi.z.zhang@intel.com>
To: "Xu, Ting" <ting.xu@intel.com>, "Guo, Junfeng" <junfeng.guo@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"Yang, Qiming" <qiming.yang@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: RE: [PATCH v2] net/ice: refact parser API usage
Date: Thu, 7 Apr 2022 07:16:30 +0000 [thread overview]
Message-ID: <175495afcf014d35b767cf09e152fb7c@intel.com> (raw)
In-Reply-To: <SN6PR11MB3261603D95D3C8BC79F58567F8E69@SN6PR11MB3261.namprd11.prod.outlook.com>
> -----Original Message-----
> From: Xu, Ting <ting.xu@intel.com>
> Sent: Thursday, April 7, 2022 2:45 PM
> To: Zhang, Qi Z <qi.z.zhang@intel.com>; Guo, Junfeng
> <junfeng.guo@intel.com>
> Cc: dev@dpdk.org; Yang, Qiming <qiming.yang@intel.com>;
> stable@dpdk.org
> Subject: RE: [PATCH v2] net/ice: refact parser API usage
>
> > -----Original Message-----
> > From: Zhang, Qi Z <qi.z.zhang@intel.com>
> > Sent: Thursday, April 7, 2022 8:40 PM
> > To: Guo, Junfeng <junfeng.guo@intel.com>; Xu, Ting <ting.xu@intel.com>
> > Cc: dev@dpdk.org; Yang, Qiming <qiming.yang@intel.com>; Zhang, Qi Z
> > <qi.z.zhang@intel.com>; stable@dpdk.org
> > Subject: [PATCH v2] net/ice: refact parser API usage
> >
> > Not necessary to create / destroy a parser instance for every raw packet
> rule.
> > A global parser instance will be created in ice_flow_init and be
> > destroyed in ice_flow_uninit.
> >
> > Also, ice_dev_udp_tunnel_port_add has been hooked to perform
> > corresponding parser configure. This also fix the issue that RSS
> > engine can't support VXLAN inner through raw packet filter.
> >
> > Fixes: 1b9c68120a1c ("net/ice: enable protocol agnostic flow
> > offloading in
> > RSS")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> > ---
> > drivers/net/ice/ice_ethdev.c | 10 ++++++++++
> > drivers/net/ice/ice_ethdev.h | 1 +
> > drivers/net/ice/ice_fdir_filter.c | 15 +++++----------
> > drivers/net/ice/ice_generic_flow.c | 8 ++++++++
> > 4 files changed, 24 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/net/ice/ice_ethdev.c
> > b/drivers/net/ice/ice_ethdev.c index 73e550f5fb..8bb34b874b 100644
> > --- a/drivers/net/ice/ice_ethdev.c
> > +++ b/drivers/net/ice/ice_ethdev.c
> > @@ -5621,6 +5621,8 @@ ice_dev_udp_tunnel_port_add(struct
> rte_eth_dev
> > *dev, {
> > int ret = 0;
> > struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> > + struct ice_adapter *ad =
> > + ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
> >
> > if (udp_tunnel == NULL)
> > return -EINVAL;
> > @@ -5628,6 +5630,9 @@ ice_dev_udp_tunnel_port_add(struct
> rte_eth_dev
> > *dev,
> > switch (udp_tunnel->prot_type) {
> > case RTE_ETH_TUNNEL_TYPE_VXLAN:
> > ret = ice_create_tunnel(hw, TNL_VXLAN, udp_tunnel-
> > >udp_port);
> > + if (!ret && ad->psr != NULL)
> > + ice_parser_vxlan_tunnel_set(ad->psr,
> > + udp_tunnel->udp_port, true);
> > break;
> > default:
> > PMD_DRV_LOG(ERR, "Invalid tunnel type"); @@ -5645,6
> > +5650,8 @@ ice_dev_udp_tunnel_port_del(struct rte_eth_dev *dev, {
> > int ret = 0;
> > struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> > + struct ice_adapter *ad =
> > + ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
> >
> > if (udp_tunnel == NULL)
> > return -EINVAL;
> > @@ -5652,6 +5659,9 @@ ice_dev_udp_tunnel_port_del(struct
> rte_eth_dev
> > *dev,
> > switch (udp_tunnel->prot_type) {
> > case RTE_ETH_TUNNEL_TYPE_VXLAN:
> > ret = ice_destroy_tunnel(hw, udp_tunnel->udp_port, 0);
> > + if (!ret && ad->psr != NULL)
> > + ice_parser_vxlan_tunnel_set(ad->psr,
> > + udp_tunnel->udp_port, false);
> > break;
> > default:
> > PMD_DRV_LOG(ERR, "Invalid tunnel type"); diff --git
> > a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h index
> > 3ab310628f..3d8427225f 100644
> > --- a/drivers/net/ice/ice_ethdev.h
> > +++ b/drivers/net/ice/ice_ethdev.h
> > @@ -561,6 +561,7 @@ struct ice_adapter {
> > struct ice_rss_prof_info rss_prof_info[ICE_MAX_PTGS];
> > /* True if DCF state of the associated PF is on */
> > bool dcf_state_on;
> > + struct ice_parser *psr;
> > #ifdef RTE_ARCH_X86
> > bool rx_use_avx2;
> > bool rx_use_avx512;
> > diff --git a/drivers/net/ice/ice_fdir_filter.c
> > b/drivers/net/ice/ice_fdir_filter.c
> > index 7954c6d8ea..894e593dc7 100644
> > --- a/drivers/net/ice/ice_fdir_filter.c
> > +++ b/drivers/net/ice/ice_fdir_filter.c
> > @@ -1826,7 +1826,6 @@ ice_fdir_parse_pattern(__rte_unused struct
> > ice_adapter *ad,
> > struct ice_fdir_v4 *p_v4 = NULL;
> > struct ice_fdir_v6 *p_v6 = NULL;
> > struct ice_parser_result rslt;
> > - struct ice_parser *psr;
> > uint8_t item_num = 0;
> >
> > for (item = pattern; item->type != RTE_FLOW_ITEM_TYPE_END;
> > item++) { @@ -1861,6 +1860,10 @@ ice_fdir_parse_pattern(__rte_unused
> > struct ice_adapter *ad,
> >
> > switch (item_type) {
> > case RTE_FLOW_ITEM_TYPE_RAW: {
> > +
> > + if (ad->psr == NULL)
> > + return -rte_errno;
> > +
> > raw_spec = item->spec;
> > raw_mask = item->mask;
> >
> > @@ -1872,7 +1875,6 @@ ice_fdir_parse_pattern(__rte_unused struct
> > ice_adapter *ad,
> > (uint8_t *)(uintptr_t)raw_spec->pattern;
> > unsigned char *tmp_mask =
> > (uint8_t *)(uintptr_t)raw_mask->pattern;
> > - uint16_t udp_port = 0;
> > uint16_t tmp_val = 0;
> > uint8_t pkt_len = 0;
> > uint8_t tmp = 0;
> > @@ -1921,15 +1923,8 @@ ice_fdir_parse_pattern(__rte_unused struct
> > ice_adapter *ad,
> >
> > pkt_len /= 2;
> >
> > - if (ice_parser_create(&ad->hw, &psr))
> > - return -rte_errno;
> > - if (ice_get_open_tunnel_port(&ad->hw, TNL_VXLAN,
> > - &udp_port))
> > - ice_parser_vxlan_tunnel_set(psr, udp_port,
> > - true);
> > - if (ice_parser_run(psr, tmp_spec, pkt_len, &rslt))
> > + if (ice_parser_run(ad->psr, tmp_spec, pkt_len, &rslt))
> > return -rte_errno;
> > - ice_parser_destroy(psr);
> >
>
> Hi, Qi, in RSS there are similar steps, we may need to change as well. Shall I
> give you a patch?
OK, I see, I will add it in v3, thanks
>
> > if (!tmp_mask)
> > return -rte_errno;
> > diff --git a/drivers/net/ice/ice_generic_flow.c
> > b/drivers/net/ice/ice_generic_flow.c
> > index 53b1c0b69a..57eb002bde 100644
> > --- a/drivers/net/ice/ice_generic_flow.c
> > +++ b/drivers/net/ice/ice_generic_flow.c
> > @@ -1831,6 +1831,9 @@ ice_flow_init(struct ice_adapter *ad)
> > TAILQ_INIT(&pf->dist_parser_list);
> > rte_spinlock_init(&pf->flow_ops_lock);
> >
> > + if (ice_parser_create(&ad->hw, &ad->psr) != ICE_SUCCESS)
> > + PMD_INIT_LOG(WARNING, "Failed to initialize DDP parser,
> > raw packet
> > +filter will not be supported");
> > +
> > RTE_TAILQ_FOREACH_SAFE(engine, &engine_list, node, temp) {
> > if (engine->init == NULL) {
> > PMD_INIT_LOG(ERR, "Invalid engine type (%d)", @@
> > -1885,6 +1888,11 @@ ice_flow_uninit(struct ice_adapter *ad)
> > TAILQ_REMOVE(&pf->dist_parser_list, p_parser, node);
> > rte_free(p_parser);
> > }
> > +
> > + if (ad->psr != NULL) {
> > + ice_parser_destroy(ad->psr);
> > + ad->psr = NULL;
> > + }
> > }
> >
> > static struct ice_parser_list *
> > --
> > 2.31.1
>
prev parent reply other threads:[~2022-04-07 7:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 12:40 Qi Zhang
2022-04-07 6:44 ` Xu, Ting
2022-04-07 7:16 ` Zhang, Qi Z [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=175495afcf014d35b767cf09e152fb7c@intel.com \
--to=qi.z.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=junfeng.guo@intel.com \
--cc=qiming.yang@intel.com \
--cc=stable@dpdk.org \
--cc=ting.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).