DPDK patches and discussions
 help / color / mirror / Atom feed
From: Pascal Mazon <pascal.mazon@6wind.com>
To: keith.wiles@intel.com
Cc: dev@dpdk.org, Pascal Mazon <pascal.mazon@6wind.com>
Subject: [dpdk-dev] [PATCH v3 2/4] net/tap: add preliminary support for rte_flow
Date: Tue,  7 Mar 2017 17:35:11 +0100	[thread overview]
Message-ID: <175de14bd7a4fdd512e59fd0c02423ed901c3d4e.1488904425.git.pascal.mazon@6wind.com> (raw)
In-Reply-To: <cover.1488904425.git.pascal.mazon@6wind.com>

The flow API provides the ability to classify packets received by a tap
netdevice.

This patch only implements skeleton functions for flow API support, no
patterns are supported yet.

Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
 doc/guides/nics/features/tap.ini |   1 +
 drivers/net/tap/Makefile         |   1 +
 drivers/net/tap/rte_eth_tap.c    |   6 ++
 drivers/net/tap/tap.h            |   2 +
 drivers/net/tap/tap_flow.c       | 185 +++++++++++++++++++++++++++++++++++++++
 drivers/net/tap/tap_flow.h       |  46 ++++++++++
 6 files changed, 241 insertions(+)
 create mode 100644 drivers/net/tap/tap_flow.c
 create mode 100644 drivers/net/tap/tap_flow.h

diff --git a/doc/guides/nics/features/tap.ini b/doc/guides/nics/features/tap.ini
index a51712dce066..9d73f61cca3b 100644
--- a/doc/guides/nics/features/tap.ini
+++ b/doc/guides/nics/features/tap.ini
@@ -9,6 +9,7 @@ Jumbo frame          = Y
 Promiscuous mode     = Y
 Allmulticast mode    = Y
 Basic stats          = Y
+Flow API             = Y
 MTU update           = Y
 Multicast MAC filter = Y
 Speed capabilities   = Y
diff --git a/drivers/net/tap/Makefile b/drivers/net/tap/Makefile
index bdbe69e62a4e..386b8b0594d3 100644
--- a/drivers/net/tap/Makefile
+++ b/drivers/net/tap/Makefile
@@ -47,6 +47,7 @@ CFLAGS += $(WERROR_FLAGS)
 # all source are stored in SRCS-y
 #
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += rte_eth_tap.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += tap_flow.c
 
 # this lib depends upon:
 DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += lib/librte_eal
diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
index 308519d265cb..d4f2ff72e8b4 100644
--- a/drivers/net/tap/rte_eth_tap.c
+++ b/drivers/net/tap/rte_eth_tap.c
@@ -52,6 +52,7 @@
 #include <fcntl.h>
 
 #include <tap.h>
+#include <tap_flow.h>
 
 /* Linux based path to the TUN device */
 #define TUN_TAP_DEV_PATH        "/dev/net/tun"
@@ -797,6 +798,7 @@ static const struct eth_dev_ops ops = {
 	.stats_get              = tap_stats_get,
 	.stats_reset            = tap_stats_reset,
 	.dev_supported_ptypes_get = tap_dev_supported_ptypes_get,
+	.filter_ctrl            = tap_dev_filter_ctrl,
 };
 
 static int
@@ -860,6 +862,8 @@ eth_dev_tap_create(const char *name, char *tap_name)
 		pmd->txq[i].fd = -1;
 	}
 
+	LIST_INIT(&pmd->flows);
+
 	return 0;
 
 error_exit:
@@ -972,6 +976,8 @@ rte_pmd_tap_remove(const char *name)
 	if (!eth_dev)
 		return 0;
 
+	tap_flow_flush(eth_dev, NULL);
+
 	internals = eth_dev->data->dev_private;
 	for (i = 0; i < internals->nb_queues; i++)
 		if (internals->rxq[i].fd != -1)
diff --git a/drivers/net/tap/tap.h b/drivers/net/tap/tap.h
index abd1795b2a43..60c0c58c7c1a 100644
--- a/drivers/net/tap/tap.h
+++ b/drivers/net/tap/tap.h
@@ -34,6 +34,7 @@
 #ifndef _TAP_H_
 #define _TAP_H_
 
+#include <sys/queue.h>
 #include <inttypes.h>
 
 #include <rte_ethdev.h>
@@ -66,6 +67,7 @@ struct pmd_internals {
 	uint16_t nb_queues;               /* Number of queues supported */
 	struct ether_addr eth_addr;       /* Mac address of the device port */
 	int if_index;                     /* IF_INDEX for the port */
+	LIST_HEAD(tap_flows, rte_flow) flows;        /* rte_flow rules */
 	struct rx_queue rxq[RTE_PMD_TAP_MAX_QUEUES]; /* List of RX queues */
 	struct tx_queue txq[RTE_PMD_TAP_MAX_QUEUES]; /* List of TX queues */
 };
diff --git a/drivers/net/tap/tap_flow.c b/drivers/net/tap/tap_flow.c
new file mode 100644
index 000000000000..de41c127c920
--- /dev/null
+++ b/drivers/net/tap/tap_flow.c
@@ -0,0 +1,185 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright 2017 6WIND S.A.
+ *   Copyright 2017 Mellanox.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of 6WIND S.A. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <tap_flow.h>
+#include <tap.h>
+
+struct rte_flow {
+	LIST_ENTRY(rte_flow) next; /* Pointer to the next rte_flow structure */
+};
+
+static int
+tap_flow_validate(struct rte_eth_dev *dev,
+		  const struct rte_flow_attr *attr,
+		  const struct rte_flow_item items[],
+		  const struct rte_flow_action actions[],
+		  struct rte_flow_error *error);
+
+static struct rte_flow *
+tap_flow_create(struct rte_eth_dev *dev,
+		const struct rte_flow_attr *attr,
+		const struct rte_flow_item items[],
+		const struct rte_flow_action actions[],
+		struct rte_flow_error *error);
+
+static int
+tap_flow_destroy(struct rte_eth_dev *dev,
+		 struct rte_flow *flow,
+		 struct rte_flow_error *error);
+
+static const struct rte_flow_ops tap_flow_ops = {
+	.validate = tap_flow_validate,
+	.create = tap_flow_create,
+	.destroy = tap_flow_destroy,
+	.flush = tap_flow_flush,
+};
+
+/**
+ * Validate a flow.
+ *
+ * @see rte_flow_validate()
+ * @see rte_flow_ops
+ */
+static int
+tap_flow_validate(struct rte_eth_dev *dev __rte_unused,
+		  const struct rte_flow_attr *attr __rte_unused,
+		  const struct rte_flow_item items[] __rte_unused,
+		  const struct rte_flow_action actions[] __rte_unused,
+		  struct rte_flow_error *error)
+{
+	return -rte_flow_error_set(error, ENOTSUP,
+				   RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+				   NULL, "not implemented yet");
+}
+
+/**
+ * Create a flow.
+ *
+ * @see rte_flow_create()
+ * @see rte_flow_ops
+ */
+static struct rte_flow *
+tap_flow_create(struct rte_eth_dev *dev,
+		const struct rte_flow_attr *attr,
+		const struct rte_flow_item items[],
+		const struct rte_flow_action actions[],
+		struct rte_flow_error *error)
+{
+	struct pmd_internals *pmd = dev->data->dev_private;
+	struct rte_flow *flow = NULL;
+
+	if (tap_flow_validate(dev, attr, items, actions, error))
+		return NULL;
+	flow = rte_malloc(__func__, sizeof(struct rte_flow), 0);
+	if (!flow) {
+		rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
+				   NULL, "cannot allocate memory for rte_flow");
+		return NULL;
+	}
+	LIST_INSERT_HEAD(&pmd->flows, flow, next);
+	return flow;
+}
+
+/**
+ * Destroy a flow.
+ *
+ * @see rte_flow_destroy()
+ * @see rte_flow_ops
+ */
+static int
+tap_flow_destroy(struct rte_eth_dev *dev __rte_unused,
+		 struct rte_flow *flow,
+		 struct rte_flow_error *error __rte_unused)
+{
+	LIST_REMOVE(flow, next);
+	rte_free(flow);
+	return 0;
+}
+
+/**
+ * Destroy all flows.
+ *
+ * @see rte_flow_flush()
+ * @see rte_flow_ops
+ */
+int
+tap_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
+{
+	struct pmd_internals *pmd = dev->data->dev_private;
+	struct rte_flow *flow;
+
+	while (!LIST_EMPTY(&pmd->flows)) {
+		flow = LIST_FIRST(&pmd->flows);
+		if (tap_flow_destroy(dev, flow, error) < 0)
+			return -1;
+	}
+	return 0;
+}
+
+/**
+ * Manage filter operations.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param filter_type
+ *   Filter type.
+ * @param filter_op
+ *   Operation to perform.
+ * @param arg
+ *   Pointer to operation-specific structure.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+int
+tap_dev_filter_ctrl(struct rte_eth_dev *dev,
+		    enum rte_filter_type filter_type,
+		    enum rte_filter_op filter_op,
+		    void *arg)
+{
+	switch (filter_type) {
+	case RTE_ETH_FILTER_GENERIC:
+		if (filter_op != RTE_ETH_FILTER_GET)
+			return -EINVAL;
+		*(const void **)arg = &tap_flow_ops;
+		return 0;
+	default:
+		RTE_LOG(ERR, PMD, "%p: filter type (%d) not supported",
+			(void *)dev, filter_type);
+	}
+	return -EINVAL;
+}
+
diff --git a/drivers/net/tap/tap_flow.h b/drivers/net/tap/tap_flow.h
new file mode 100644
index 000000000000..377a9f7b758a
--- /dev/null
+++ b/drivers/net/tap/tap_flow.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright 2017 6WIND S.A.
+ *   Copyright 2017 Mellanox.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of 6WIND S.A. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _TAP_FLOW_H_
+#define _TAP_FLOW_H_
+
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+int tap_dev_filter_ctrl(struct rte_eth_dev *dev,
+			enum rte_filter_type filter_type,
+			enum rte_filter_op filter_op,
+			void *arg);
+int tap_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error);
+
+#endif /* _TAP_FLOW_H_ */
-- 
2.8.0.rc0

  parent reply	other threads:[~2017-03-07 16:35 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-03 10:45 [dpdk-dev] [PATCH 0/4] net/tap: support flow API Pascal Mazon
2017-03-03 10:45 ` [dpdk-dev] [PATCH 1/4] net/tap: move private elements to external header Pascal Mazon
2017-03-03 15:38   ` Wiles, Keith
2017-03-06 14:18     ` Pascal Mazon
2017-03-06 14:51       ` Wiles, Keith
2017-03-03 10:45 ` [dpdk-dev] [PATCH 2/4] net/tap: add preliminary support for rte_flow Pascal Mazon
2017-03-03 10:45 ` [dpdk-dev] [PATCH 3/4] net/tap: add netlink back-end for flow API Pascal Mazon
2017-03-03 10:45 ` [dpdk-dev] [PATCH 4/4] net/tap: add basic flow API patterns and actions Pascal Mazon
2017-03-03 15:47   ` Wiles, Keith
2017-03-06 14:22     ` Pascal Mazon
2017-03-03 15:54 ` [dpdk-dev] [PATCH 0/4] net/tap: support flow API Wiles, Keith
2017-03-06 17:05 ` [dpdk-dev] [PATCH v2 " Pascal Mazon
2017-03-06 17:05   ` [dpdk-dev] [PATCH v2 1/4] net/tap: move private elements to external header Pascal Mazon
2017-03-06 17:05   ` [dpdk-dev] [PATCH v2 2/4] net/tap: add preliminary support for rte_flow Pascal Mazon
2017-03-06 17:05   ` [dpdk-dev] [PATCH v2 3/4] net/tap: add netlink back-end for flow API Pascal Mazon
2017-03-06 17:05   ` [dpdk-dev] [PATCH v2 4/4] net/tap: add basic flow API patterns and actions Pascal Mazon
2017-03-07 15:05   ` [dpdk-dev] [PATCH v2 0/4] net/tap: support flow API Pascal Mazon
2017-03-07 15:08     ` Wiles, Keith
2017-03-07 16:35   ` [dpdk-dev] [PATCH v3 " Pascal Mazon
2017-03-07 16:35     ` [dpdk-dev] [PATCH v3 1/4] net/tap: move private elements to external header Pascal Mazon
2017-03-09 15:28       ` Ferruh Yigit
2017-03-10  9:40         ` Pascal Mazon
2017-03-07 16:35     ` Pascal Mazon [this message]
2017-03-07 16:35     ` [dpdk-dev] [PATCH v3 3/4] net/tap: add netlink back-end for flow API Pascal Mazon
2017-03-09 15:29       ` Ferruh Yigit
2017-03-10  9:39         ` Pascal Mazon
2017-03-07 16:35     ` [dpdk-dev] [PATCH v3 4/4] net/tap: add basic flow API patterns and actions Pascal Mazon
2017-03-14  8:29   ` [dpdk-dev] [PATCH v4 0/4] net/tap: support flow API Pascal Mazon
2017-03-14  8:29     ` [dpdk-dev] [PATCH v4 1/4] net/tap: move private elements to external header Pascal Mazon
2017-03-14 14:05       ` Wiles, Keith
2017-03-14  8:29     ` [dpdk-dev] [PATCH v4 2/4] net/tap: add preliminary support for rte_flow Pascal Mazon
2017-03-14  8:29     ` [dpdk-dev] [PATCH v4 3/4] net/tap: add netlink back-end for flow API Pascal Mazon
2017-03-14 14:03       ` Wiles, Keith
2017-03-14  8:29     ` [dpdk-dev] [PATCH v4 4/4] net/tap: add basic flow API patterns and actions Pascal Mazon
2017-03-15 14:54   ` [dpdk-dev] [PATCH v5 0/4] net/tap: support flow API Pascal Mazon
2017-03-15 14:54     ` [dpdk-dev] [PATCH v5 1/4] net/tap: move private elements to external header Pascal Mazon
2017-03-21 15:32       ` Wiles, Keith
2017-03-21 16:57         ` Pascal Mazon
2017-03-15 14:54     ` [dpdk-dev] [PATCH v5 2/4] net/tap: add preliminary support for rte_flow Pascal Mazon
2017-03-21 15:35       ` Wiles, Keith
2017-03-15 14:54     ` [dpdk-dev] [PATCH v5 3/4] net/tap: add netlink back-end for flow API Pascal Mazon
2017-03-15 14:54     ` [dpdk-dev] [PATCH v5 4/4] net/tap: add basic flow API patterns and actions Pascal Mazon
2017-03-21 17:10       ` Ferruh Yigit
2017-03-21 15:48     ` [dpdk-dev] [PATCH v5 0/4] net/tap: support flow API Wiles, Keith
2017-03-22  9:48   ` [dpdk-dev] [PATCH v6 " Pascal Mazon
2017-03-22  9:48     ` [dpdk-dev] [PATCH v6 1/4] net/tap: move private elements to external header Pascal Mazon
2017-03-22  9:48     ` [dpdk-dev] [PATCH v6 2/4] net/tap: add preliminary support for rte_flow Pascal Mazon
2017-03-22  9:48     ` [dpdk-dev] [PATCH v6 3/4] net/tap: add netlink back-end for flow API Pascal Mazon
2017-03-22  9:48     ` [dpdk-dev] [PATCH v6 4/4] net/tap: add basic flow API patterns and actions Pascal Mazon
2017-03-22 13:56       ` Ferruh Yigit
2017-03-22 14:22     ` [dpdk-dev] [PATCH v6 0/4] net/tap: support flow API Wiles, Keith
2017-03-23  8:33     ` [dpdk-dev] [PATCH v7 " Pascal Mazon
2017-03-23  8:33       ` [dpdk-dev] [PATCH v7 1/4] net/tap: move private elements to external header Pascal Mazon
2017-03-23  8:33       ` [dpdk-dev] [PATCH v7 2/4] net/tap: add preliminary support for rte_flow Pascal Mazon
2017-03-23  8:33       ` [dpdk-dev] [PATCH v7 3/4] net/tap: add netlink back-end for flow API Pascal Mazon
2017-03-23  8:33       ` [dpdk-dev] [PATCH v7 4/4] net/tap: add basic flow API patterns and actions Pascal Mazon
2017-03-23 12:50       ` [dpdk-dev] [PATCH v7 0/4] net/tap: support flow API Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=175de14bd7a4fdd512e59fd0c02423ed901c3d4e.1488904425.git.pascal.mazon@6wind.com \
    --to=pascal.mazon@6wind.com \
    --cc=dev@dpdk.org \
    --cc=keith.wiles@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).