* [dpdk-dev] could not l2fwd in DOM0
@ 2014-04-29 17:53 Samuel Monderer
[not found] ` <CAD16F236028A64DBBC0158B1636EA4510E8816E@SHSMSX104.ccr.corp.intel.com>
0 siblings, 1 reply; 7+ messages in thread
From: Samuel Monderer @ 2014-04-29 17:53 UTC (permalink / raw)
To: dev; +Cc: Shimon Zadok
Hi,
First I've encountered a compiling problem when compiling for DOM0 due to prototype change of the function xen_create_contiguous_region
I made the following changes:
diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c b/lib/librte_eal/linuxapp/xen
index 87fa3e6..8addc21 100644
--- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
+++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
@@ -64,6 +64,7 @@
#include <linux/errno.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
+//#include <linux/types.h>
#include <xen/xen.h>
#include <xen/page.h>
@@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
uint64_t pfn, vstart, vaddr;
uint32_t i, num_block, size;
int idx;
+ dma_addr_t *dma_handle = NULL;
/* Allocate 2M memory once */
num_block = meminfo->size / 2;
@@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
* contiguous physical addresses, its maximum size is 2M.
*/
if (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
- DOM0_CONTIG_NUM_ORDER, 0) == 0) {
+ DOM0_CONTIG_NUM_ORDER, 0, dma_handle) == 0) {
mm_data->block_info[i].exchange_flag = 1;
mm_data->block_info[i].mfn =
pfn_to_mfn(mm_data->block_info[i].pfn);
After that I tried to run l2fwd example and got a segmentation fault
root@Smart:~/samuelm/dpdk/dpdk# modprobe uio
root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-gcc/kmod/rte_dom0_mm.ko
root@Smart:~/samuelm/dpdk/dpdk# cd examples/l2fwd/build/
root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# echo 2048 > /sys/kernel/mm/dom0-mm/memsize-mB/memsize
root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# ./l2fwd -c 3 -n 4 --xen-dom0 -- -q 1 -p 3
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Setting up memory...
Segmentation fault
root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build#
Has anyone already encountered this problem?
Samuelm
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] could not l2fwd in DOM0
[not found] ` <CAD16F236028A64DBBC0158B1636EA4510E8816E@SHSMSX104.ccr.corp.intel.com>
@ 2014-05-07 4:35 ` Liu, Jijiang
[not found] ` <9f34498d15cd400eb2db76212778c038@MUC-SRV-MBX2.advaoptical.com>
0 siblings, 1 reply; 7+ messages in thread
From: Liu, Jijiang @ 2014-05-07 4:35 UTC (permalink / raw)
To: dev
Hi,
I have checked source codes of xen_create_contiguous_region function in kernel 3.14, and found the dma_handle cannot be NULL.
int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
unsigned int address_bits,
dma_addr_t *dma_handle)
{
unsigned long *in_frames = discontig_frames, out_frame;
unsigned long flags;
int success;
unsigned long vstart = (unsigned long)phys_to_virt(pstart);
...
*dma_handle = virt_to_machine(vstart).maddr;
return success ? 0 : -ENOMEM;
}
Thanks
Frank Liu
-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
Sent: Wednesday, April 30, 2014 1:54 AM
To: dev@dpdk.org<mailto:dev@dpdk.org>
Cc: Shimon Zadok
Subject: [dpdk-dev] could not l2fwd in DOM0
Hi,
First I've encountered a compiling problem when compiling for DOM0 due to prototype change of the function xen_create_contiguous_region I made the following changes:
diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
--- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
+++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
@@ -64,6 +64,7 @@
#include <linux/errno.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
+//#include <linux/types.h>
#include <xen/xen.h>
#include <xen/page.h>
@@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
uint64_t pfn, vstart, vaddr;
uint32_t i, num_block, size;
int idx;
+ dma_addr_t *dma_handle = NULL;
/* Allocate 2M memory once */
num_block = meminfo->size / 2;
@@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
* contiguous physical addresses, its maximum size is 2M.
*/
if (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
- DOM0_CONTIG_NUM_ORDER, 0) == 0) {
+ DOM0_CONTIG_NUM_ORDER, 0,
+ dma_handle) == 0) {
mm_data->block_info[i].exchange_flag = 1;
mm_data->block_info[i].mfn =
pfn_to_mfn(mm_data->block_info[i].pfn);
After that I tried to run l2fwd example and got a segmentation fault
root@Smart:~/samuelm/dpdk/dpdk# modprobe uio root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-gcc/kmod/rte_dom0_mm.ko
root@Smart:~/samuelm/dpdk/dpdk# cd examples/l2fwd/build/ root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# echo 2048 > /sys/kernel/mm/dom0-mm/memsize-mB/memsize
root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# ./l2fwd -c 3 -n 4 --xen-dom0 -- -q 1 -p 3
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Setting up memory...
Segmentation fault
root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build#
Has anyone already encountered this problem?
Samuelm
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] could not l2fwd in DOM0
[not found] ` <9f34498d15cd400eb2db76212778c038@MUC-SRV-MBX2.advaoptical.com>
@ 2014-05-07 12:44 ` Samuel Monderer
0 siblings, 0 replies; 7+ messages in thread
From: Samuel Monderer @ 2014-05-07 12:44 UTC (permalink / raw)
To: Liu, Jijiang; +Cc: dev
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Liu, Jijiang
> Sent: Wednesday, May 07, 2014 7:36 AM
> To: dev@dpdk.org
> Subject: Re: [dpdk-dev] could not l2fwd in DOM0
>
> Hi,
>
> I have checked source codes of xen_create_contiguous_region function in
> kernel 3.14, and found the dma_handle cannot be NULL.
>
> int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
> unsigned int address_bits,
> dma_addr_t *dma_handle) {
> unsigned long *in_frames = discontig_frames, out_frame;
> unsigned long flags;
> int success;
> unsigned long vstart = (unsigned long)phys_to_virt(pstart);
> ...
> *dma_handle = virt_to_machine(vstart).maddr;
> return success ? 0 : -ENOMEM;
> }
>
> Thanks
> Frank Liu
>
Thanks Frank,
I've changed the code as following but now the kernel module crashes.
diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
--- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
+++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
@@ -64,6 +64,7 @@
#include <linux/errno.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <xen/xen.h>
#include <xen/page.h>
@@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
dom0_mm_data
uint64_t pfn, vstart, vaddr;
uint32_t i, num_block, size;
int idx;
+ dma_addr_t dma_handle;
/* Allocate 2M memory once */
num_block = meminfo->size / 2;
@@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
dom0_mm_data
* contiguous physical addresses, its maximum size is 2M.
*/
if (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
- DOM0_CONTIG_NUM_ORDER, 0) == 0) {
+ DOM0_CONTIG_NUM_ORDER, 0,
+ &dma_handle) == 0) {
mm_data->block_info[i].exchange_flag = 1;
mm_data->block_info[i].mfn =
pfn_to_mfn(mm_data->block_info[i].pfn);
Samuel
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> Sent: Wednesday, April 30, 2014 1:54 AM
> To: dev@dpdk.org<mailto:dev@dpdk.org>
> Cc: Shimon Zadok
> Subject: [dpdk-dev] could not l2fwd in DOM0
>
> Hi,
>
> First I've encountered a compiling problem when compiling for DOM0 due to
> prototype change of the function xen_create_contiguous_region I made the
> following changes:
>
> diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> @@ -64,6 +64,7 @@
> #include <linux/errno.h>
> #include <linux/vmalloc.h>
> #include <linux/mm.h>
> +//#include <linux/types.h>
>
> #include <xen/xen.h>
> #include <xen/page.h>
> @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info*
> meminfo, struct dom0_mm_data
> uint64_t pfn, vstart, vaddr;
> uint32_t i, num_block, size;
> int idx;
> + dma_addr_t *dma_handle = NULL;
>
> /* Allocate 2M memory once */
> num_block = meminfo->size / 2;
> @@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info*
> meminfo, struct dom0_mm_data
> * contiguous physical addresses, its maximum size is 2M.
> */
> if (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
> - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> + DOM0_CONTIG_NUM_ORDER, 0,
> + dma_handle) == 0) {
> mm_data->block_info[i].exchange_flag = 1;
> mm_data->block_info[i].mfn =
> pfn_to_mfn(mm_data->block_info[i].pfn);
>
> After that I tried to run l2fwd example and got a segmentation fault
>
> root@Smart:~/samuelm/dpdk/dpdk# modprobe uio
> root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-
> gcc/kmod/igb_uio.ko
> root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-
> gcc/kmod/rte_dom0_mm.ko
> root@Smart:~/samuelm/dpdk/dpdk# cd examples/l2fwd/build/
> root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# echo 2048 >
> /sys/kernel/mm/dom0-mm/memsize-mB/memsize
> root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# ./l2fwd -c 3 -n 4
> --xen-dom0 -- -q 1 -p 3
> EAL: Detected lcore 0 as core 0 on socket 0
> EAL: Detected lcore 1 as core 0 on socket 0
> EAL: Setting up memory...
> Segmentation fault
> root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build#
>
> Has anyone already encountered this problem?
>
> Samuelm
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] could not l2fwd in DOM0
2014-05-29 10:12 ` Liu, Jijiang
@ 2014-06-09 16:02 ` Thomas Monjalon
0 siblings, 0 replies; 7+ messages in thread
From: Thomas Monjalon @ 2014-06-09 16:02 UTC (permalink / raw)
To: SMonderer; +Cc: dev, xen-devel
Jijiang's patch has been applied on master branch:
http://dpdk.org/browse/dpdk/commit/?id=6f0ce7b9cd490
2014-05-29 10:12, Liu, Jijiang:
> Ok, I will send a patch for fixing this.
>
> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
> Sent: Thursday, May 29, 2014 5:59 PM
> To: Liu, Jijiang
> Cc: dev@dpdk.org; SMonderer@advaoptical.com; xen-devel@lists.xen.org
> Subject: Re: [dpdk-dev] could not l2fwd in DOM0
>
> Jijiang, I'm not sure to understand.
> Could you send a proper patch for this issue?
>
> Thanks
>
> > In Linux kernel versions < 3.14 , the vstart is kernel virtual address,
> > the
> > API prototype below. int xen_create_contiguous_region(unsigned long
> > vstart,
> > unsigned int order, unsigned int address_bits)
> >
> > In Linux kernel 3.14, the pstart is kernel physical address, the API
> > prototype below. int xen_create_contiguous_region(phys_addr_t pstart,
> > unsigned int order, unsigned int address_bits,
> >
> > dma_addr_t *dma_handle)
> >
> > ,so the mm_data->block_info[i].vir_addr cannot pass to
> > xen_create_contiguous_region() directly for Linux kernel 3.14, the pstart
> > should be mm_data->block_info[i].pfn * PAGE_SIZE in the Dom0 Driver.
> >
> > #include <linux/errno.h>
> >
> > #include <linux/vmalloc.h>
> > #include <linux/mm.h>
> >
> > #include <xen/xen.h>
> > #include <xen/page.h>
> >
> > @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> > struct dom0_mm_data uint64_t pfn, vstart, vaddr;
> >
> > uint32_t i, num_block, size;
> > int idx;
> >
> > + dma_addr_t dma_handle;
> >
> > /* Allocate 2M memory once */
> > num_block = meminfo->size / 2;
> >
> > @@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> > struct dom0_mm_data * contiguous physical addresses, its maximum size is
> > 2M. */>
> > if
> > (xen_create_contiguous_region(mm_data->block_info[i].pfn
> >
> > * PAGE_SIZE, - DOM0_CONTIG_NUM_ORDER, 0)
> > == 0) { + DOM0_CONTIG_NUM_ORDER, 0,
> > + &dma_handle) == 0) {
> >
> > mm_data->block_info[i].exchange_flag = 1;
> > mm_data->block_info[i].mfn =
> >
> > pfn_to_mfn(mm_data->block_info[i].pfn);
> >
> > Thanks
> > Frank Liu
> >
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> > Sent: Wednesday, May 07, 2014 8:44 PM
> > To: Liu, Jijiang
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] could not l2fwd in DOM0
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Liu, Jijiang
> > > Sent: Wednesday, May 07, 2014 7:36 AM
> > > To: dev@dpdk.org
> > > Subject: Re: [dpdk-dev] could not l2fwd in DOM0
> > >
> > > Hi,
> > >
> > > I have checked source codes of xen_create_contiguous_region function
> > > in kernel 3.14, and found the dma_handle cannot be NULL.
> > >
> > > int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
> > >
> > > unsigned int address_bits,
> > > dma_addr_t *dma_handle) {
> > >
> > > unsigned long *in_frames = discontig_frames, out_frame;
> > > unsigned long flags;
> > > int success;
> > > unsigned long vstart = (unsigned long)phys_to_virt(pstart);
> > >
> > > ...
> > >
> > > *dma_handle = virt_to_machine(vstart).maddr;
> > > return success ? 0 : -ENOMEM;
> > >
> > > }
> > >
> > > Thanks
> > > Frank Liu
> >
> > Thanks Frank,
> >
> > I've changed the code as following but now the kernel module crashes.
> >
> > diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> > --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > @@ -64,6 +64,7 @@
> >
> > #include <linux/errno.h>
> > #include <linux/vmalloc.h>
> > #include <linux/mm.h>
> >
> > #include <xen/xen.h>
> > #include <xen/page.h>
> >
> > @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> > struct dom0_mm_data uint64_t pfn, vstart, vaddr;
> >
> > uint32_t i, num_block, size;
> > int idx;
> >
> > + dma_addr_t dma_handle;
> >
> > /* Allocate 2M memory once */
> > num_block = meminfo->size / 2;
> >
> > @@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> > struct dom0_mm_data * contiguous physical addresses, its maximum size is
> > 2M. */>
> > if
> >
> > (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
> > - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> > + DOM0_CONTIG_NUM_ORDER, 0,
> > + &dma_handle) == 0) {
> >
> > mm_data->block_info[i].exchange_flag = 1;
> > mm_data->block_info[i].mfn =
> >
> > pfn_to_mfn(mm_data->block_info[i].pfn);
> >
> > Samuel
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> > > Sent: Wednesday, April 30, 2014 1:54 AM
> > > To: dev@dpdk.org<mailto:dev@dpdk.org>
> > > Cc: Shimon Zadok
> > > Subject: [dpdk-dev] could not l2fwd in DOM0
> > >
> > > Hi,
> > >
> > > First I've encountered a compiling problem when compiling for DOM0 due
> > > to prototype change of the function xen_create_contiguous_region I
> > > made the following changes:
> > >
> > > diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > > b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> > > --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > > +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > > @@ -64,6 +64,7 @@
> > >
> > > #include <linux/errno.h>
> > > #include <linux/vmalloc.h>
> > > #include <linux/mm.h>
> > >
> > > +//#include <linux/types.h>
> > >
> > > #include <xen/xen.h>
> > > #include <xen/page.h>
> > >
> > > @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> > > struct dom0_mm_data
> > >
> > > uint64_t pfn, vstart, vaddr;
> > > uint32_t i, num_block, size;
> > > int idx;
> > >
> > > + dma_addr_t *dma_handle = NULL;
> > >
> > > /* Allocate 2M memory once */
> > > num_block = meminfo->size / 2; @@ -344,7 +346,7 @@
> > >
> > > dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
> > >
> > > * contiguous physical addresses, its maximum size is
> > > 2M.
> > > */
> > >
> > > if
> > > (xen_create_contiguous_region(mm_data->block_info[i].vir
> > > _
> > > addr,
> > >
> > > - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> > > + DOM0_CONTIG_NUM_ORDER, 0,
> > > + dma_handle) == 0) {
> > >
> > > mm_data->block_info[i].exchange_flag = 1;
> > > mm_data->block_info[i].mfn =
> > >
> > > pfn_to_mfn(mm_data->block_info[i].pfn);
> > >
> > > After that I tried to run l2fwd example and got a segmentation fault
> > >
> > > root@Smart:~/samuelm/dpdk/dpdk# modprobe uio
> > > root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-
> > > gcc/kmod/igb_uio.ko root@Smart:~/samuelm/dpdk/dpdk# insmod
> > > ./x86_64-default-linuxapp- gcc/kmod/rte_dom0_mm.ko
> > > root@Smart:~/samuelm/dpdk/dpdk# cd examples/l2fwd/build/
> > > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# echo 2048 >
> > > /sys/kernel/mm/dom0-mm/memsize-mB/memsize
> > > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# ./l2fwd -c 3 -n 4
> > > --xen-dom0 -- -q 1 -p 3
> > > EAL: Detected lcore 0 as core 0 on socket 0
> > > EAL: Detected lcore 1 as core 0 on socket 0
> > > EAL: Setting up memory...
> > > Segmentation fault
> > > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build#
> > >
> > > Has anyone already encountered this problem?
> > >
> > > Samuelm
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] could not l2fwd in DOM0
2014-05-29 9:58 ` Thomas Monjalon
@ 2014-05-29 10:12 ` Liu, Jijiang
2014-06-09 16:02 ` Thomas Monjalon
0 siblings, 1 reply; 7+ messages in thread
From: Liu, Jijiang @ 2014-05-29 10:12 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, SMonderer, xen-devel
Ok, I will send a patch for fixing this.
-----Original Message-----
From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
Sent: Thursday, May 29, 2014 5:59 PM
To: Liu, Jijiang
Cc: dev@dpdk.org; SMonderer@advaoptical.com; xen-devel@lists.xen.org
Subject: Re: [dpdk-dev] could not l2fwd in DOM0
Jijiang, I'm not sure to understand.
Could you send a proper patch for this issue?
Thanks
--
Thomas
2014-05-17 07:48, Liu, Jijiang:
> In Linux kernel versions < 3.14 , the vstart is kernel virtual address, the
> API prototype below. int xen_create_contiguous_region(unsigned long vstart,
> unsigned int order, unsigned int address_bits)
>
> In Linux kernel 3.14, the pstart is kernel physical address, the API
> prototype below. int xen_create_contiguous_region(phys_addr_t pstart,
> unsigned int order, unsigned int address_bits,
> dma_addr_t *dma_handle)
>
> ,so the mm_data->block_info[i].vir_addr cannot pass to
> xen_create_contiguous_region() directly for Linux kernel 3.14, the pstart
> should be mm_data->block_info[i].pfn * PAGE_SIZE in the Dom0 Driver.
>
> #include <linux/errno.h>
> #include <linux/vmalloc.h>
> #include <linux/mm.h>
>
> #include <xen/xen.h>
> #include <xen/page.h>
> @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data uint64_t pfn, vstart, vaddr;
> uint32_t i, num_block, size;
> int idx;
> + dma_addr_t dma_handle;
>
> /* Allocate 2M memory once */
> num_block = meminfo->size / 2;
> @@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data * contiguous physical addresses, its maximum size is 2M. */
> if (xen_create_contiguous_region(mm_data->block_info[i].pfn
> * PAGE_SIZE, - DOM0_CONTIG_NUM_ORDER, 0)
> == 0) { + DOM0_CONTIG_NUM_ORDER, 0,
> + &dma_handle) == 0) {
> mm_data->block_info[i].exchange_flag = 1;
> mm_data->block_info[i].mfn =
> pfn_to_mfn(mm_data->block_info[i].pfn);
>
> Thanks
> Frank Liu
>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> Sent: Wednesday, May 07, 2014 8:44 PM
> To: Liu, Jijiang
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] could not l2fwd in DOM0
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Liu, Jijiang
> > Sent: Wednesday, May 07, 2014 7:36 AM
> > To: dev@dpdk.org
> > Subject: Re: [dpdk-dev] could not l2fwd in DOM0
> >
> > Hi,
> >
> > I have checked source codes of xen_create_contiguous_region function
> > in kernel 3.14, and found the dma_handle cannot be NULL.
> >
> > int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
> >
> > unsigned int address_bits,
> > dma_addr_t *dma_handle) {
> >
> > unsigned long *in_frames = discontig_frames, out_frame;
> > unsigned long flags;
> > int success;
> > unsigned long vstart = (unsigned long)phys_to_virt(pstart);
> >
> > ...
> >
> > *dma_handle = virt_to_machine(vstart).maddr;
> > return success ? 0 : -ENOMEM;
> >
> > }
> >
> > Thanks
> > Frank Liu
>
> Thanks Frank,
>
> I've changed the code as following but now the kernel module crashes.
>
> diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> @@ -64,6 +64,7 @@
> #include <linux/errno.h>
> #include <linux/vmalloc.h>
> #include <linux/mm.h>
>
> #include <xen/xen.h>
> #include <xen/page.h>
> @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data uint64_t pfn, vstart, vaddr;
> uint32_t i, num_block, size;
> int idx;
> + dma_addr_t dma_handle;
>
> /* Allocate 2M memory once */
> num_block = meminfo->size / 2;
> @@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data * contiguous physical addresses, its maximum size is 2M. */
> if
> (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
> - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> + DOM0_CONTIG_NUM_ORDER, 0,
> + &dma_handle) == 0) {
> mm_data->block_info[i].exchange_flag = 1;
> mm_data->block_info[i].mfn =
> pfn_to_mfn(mm_data->block_info[i].pfn);
>
> Samuel
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> > Sent: Wednesday, April 30, 2014 1:54 AM
> > To: dev@dpdk.org<mailto:dev@dpdk.org>
> > Cc: Shimon Zadok
> > Subject: [dpdk-dev] could not l2fwd in DOM0
> >
> > Hi,
> >
> > First I've encountered a compiling problem when compiling for DOM0 due
> > to prototype change of the function xen_create_contiguous_region I
> > made the following changes:
> >
> > diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> > --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > @@ -64,6 +64,7 @@
> >
> > #include <linux/errno.h>
> > #include <linux/vmalloc.h>
> > #include <linux/mm.h>
> >
> > +//#include <linux/types.h>
> >
> > #include <xen/xen.h>
> > #include <xen/page.h>
> >
> > @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> > struct dom0_mm_data
> >
> > uint64_t pfn, vstart, vaddr;
> > uint32_t i, num_block, size;
> > int idx;
> >
> > + dma_addr_t *dma_handle = NULL;
> >
> > /* Allocate 2M memory once */
> > num_block = meminfo->size / 2; @@ -344,7 +346,7 @@
> >
> > dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
> >
> > * contiguous physical addresses, its maximum size is 2M.
> > */
> >
> > if
> > (xen_create_contiguous_region(mm_data->block_info[i].vir_
> > addr,
> >
> > - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> > + DOM0_CONTIG_NUM_ORDER, 0,
> > + dma_handle) == 0) {
> >
> > mm_data->block_info[i].exchange_flag = 1;
> > mm_data->block_info[i].mfn =
> >
> > pfn_to_mfn(mm_data->block_info[i].pfn);
> >
> > After that I tried to run l2fwd example and got a segmentation fault
> >
> > root@Smart:~/samuelm/dpdk/dpdk# modprobe uio
> > root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-
> > gcc/kmod/igb_uio.ko root@Smart:~/samuelm/dpdk/dpdk# insmod
> > ./x86_64-default-linuxapp- gcc/kmod/rte_dom0_mm.ko
> > root@Smart:~/samuelm/dpdk/dpdk# cd examples/l2fwd/build/
> > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# echo 2048 >
> > /sys/kernel/mm/dom0-mm/memsize-mB/memsize
> > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# ./l2fwd -c 3 -n 4
> > --xen-dom0 -- -q 1 -p 3
> > EAL: Detected lcore 0 as core 0 on socket 0
> > EAL: Detected lcore 1 as core 0 on socket 0
> > EAL: Setting up memory...
> > Segmentation fault
> > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build#
> >
> > Has anyone already encountered this problem?
> >
> > Samuelm
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] could not l2fwd in DOM0
2014-05-17 7:48 Liu, Jijiang
@ 2014-05-29 9:58 ` Thomas Monjalon
2014-05-29 10:12 ` Liu, Jijiang
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Monjalon @ 2014-05-29 9:58 UTC (permalink / raw)
To: Liu, Jijiang; +Cc: dev, SMonderer, xen-devel
Jijiang, I'm not sure to understand.
Could you send a proper patch for this issue?
Thanks
--
Thomas
2014-05-17 07:48, Liu, Jijiang:
> In Linux kernel versions < 3.14 , the vstart is kernel virtual address, the
> API prototype below. int xen_create_contiguous_region(unsigned long vstart,
> unsigned int order, unsigned int address_bits)
>
> In Linux kernel 3.14, the pstart is kernel physical address, the API
> prototype below. int xen_create_contiguous_region(phys_addr_t pstart,
> unsigned int order, unsigned int address_bits,
> dma_addr_t *dma_handle)
>
> ,so the mm_data->block_info[i].vir_addr cannot pass to
> xen_create_contiguous_region() directly for Linux kernel 3.14, the pstart
> should be mm_data->block_info[i].pfn * PAGE_SIZE in the Dom0 Driver.
>
> #include <linux/errno.h>
> #include <linux/vmalloc.h>
> #include <linux/mm.h>
>
> #include <xen/xen.h>
> #include <xen/page.h>
> @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data uint64_t pfn, vstart, vaddr;
> uint32_t i, num_block, size;
> int idx;
> + dma_addr_t dma_handle;
>
> /* Allocate 2M memory once */
> num_block = meminfo->size / 2;
> @@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data * contiguous physical addresses, its maximum size is 2M. */
> if (xen_create_contiguous_region(mm_data->block_info[i].pfn
> * PAGE_SIZE, - DOM0_CONTIG_NUM_ORDER, 0)
> == 0) { + DOM0_CONTIG_NUM_ORDER, 0,
> + &dma_handle) == 0) {
> mm_data->block_info[i].exchange_flag = 1;
> mm_data->block_info[i].mfn =
> pfn_to_mfn(mm_data->block_info[i].pfn);
>
> Thanks
> Frank Liu
>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> Sent: Wednesday, May 07, 2014 8:44 PM
> To: Liu, Jijiang
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] could not l2fwd in DOM0
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Liu, Jijiang
> > Sent: Wednesday, May 07, 2014 7:36 AM
> > To: dev@dpdk.org
> > Subject: Re: [dpdk-dev] could not l2fwd in DOM0
> >
> > Hi,
> >
> > I have checked source codes of xen_create_contiguous_region function
> > in kernel 3.14, and found the dma_handle cannot be NULL.
> >
> > int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
> >
> > unsigned int address_bits,
> > dma_addr_t *dma_handle) {
> >
> > unsigned long *in_frames = discontig_frames, out_frame;
> > unsigned long flags;
> > int success;
> > unsigned long vstart = (unsigned long)phys_to_virt(pstart);
> >
> > ...
> >
> > *dma_handle = virt_to_machine(vstart).maddr;
> > return success ? 0 : -ENOMEM;
> >
> > }
> >
> > Thanks
> > Frank Liu
>
> Thanks Frank,
>
> I've changed the code as following but now the kernel module crashes.
>
> diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> @@ -64,6 +64,7 @@
> #include <linux/errno.h>
> #include <linux/vmalloc.h>
> #include <linux/mm.h>
>
> #include <xen/xen.h>
> #include <xen/page.h>
> @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data uint64_t pfn, vstart, vaddr;
> uint32_t i, num_block, size;
> int idx;
> + dma_addr_t dma_handle;
>
> /* Allocate 2M memory once */
> num_block = meminfo->size / 2;
> @@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct
> dom0_mm_data * contiguous physical addresses, its maximum size is 2M. */
> if
> (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
> - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> + DOM0_CONTIG_NUM_ORDER, 0,
> + &dma_handle) == 0) {
> mm_data->block_info[i].exchange_flag = 1;
> mm_data->block_info[i].mfn =
> pfn_to_mfn(mm_data->block_info[i].pfn);
>
> Samuel
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> > Sent: Wednesday, April 30, 2014 1:54 AM
> > To: dev@dpdk.org<mailto:dev@dpdk.org>
> > Cc: Shimon Zadok
> > Subject: [dpdk-dev] could not l2fwd in DOM0
> >
> > Hi,
> >
> > First I've encountered a compiling problem when compiling for DOM0 due
> > to prototype change of the function xen_create_contiguous_region I
> > made the following changes:
> >
> > diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> > --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> > @@ -64,6 +64,7 @@
> >
> > #include <linux/errno.h>
> > #include <linux/vmalloc.h>
> > #include <linux/mm.h>
> >
> > +//#include <linux/types.h>
> >
> > #include <xen/xen.h>
> > #include <xen/page.h>
> >
> > @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> > struct dom0_mm_data
> >
> > uint64_t pfn, vstart, vaddr;
> > uint32_t i, num_block, size;
> > int idx;
> >
> > + dma_addr_t *dma_handle = NULL;
> >
> > /* Allocate 2M memory once */
> > num_block = meminfo->size / 2; @@ -344,7 +346,7 @@
> >
> > dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
> >
> > * contiguous physical addresses, its maximum size is 2M.
> > */
> >
> > if
> > (xen_create_contiguous_region(mm_data->block_info[i].vir_
> > addr,
> >
> > - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> > + DOM0_CONTIG_NUM_ORDER, 0,
> > + dma_handle) == 0) {
> >
> > mm_data->block_info[i].exchange_flag = 1;
> > mm_data->block_info[i].mfn =
> >
> > pfn_to_mfn(mm_data->block_info[i].pfn);
> >
> > After that I tried to run l2fwd example and got a segmentation fault
> >
> > root@Smart:~/samuelm/dpdk/dpdk# modprobe uio
> > root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-
> > gcc/kmod/igb_uio.ko root@Smart:~/samuelm/dpdk/dpdk# insmod
> > ./x86_64-default-linuxapp- gcc/kmod/rte_dom0_mm.ko
> > root@Smart:~/samuelm/dpdk/dpdk# cd examples/l2fwd/build/
> > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# echo 2048 >
> > /sys/kernel/mm/dom0-mm/memsize-mB/memsize
> > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# ./l2fwd -c 3 -n 4
> > --xen-dom0 -- -q 1 -p 3
> > EAL: Detected lcore 0 as core 0 on socket 0
> > EAL: Detected lcore 1 as core 0 on socket 0
> > EAL: Setting up memory...
> > Segmentation fault
> > root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build#
> >
> > Has anyone already encountered this problem?
> >
> > Samuelm
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dpdk-dev] could not l2fwd in DOM0
@ 2014-05-17 7:48 Liu, Jijiang
2014-05-29 9:58 ` Thomas Monjalon
0 siblings, 1 reply; 7+ messages in thread
From: Liu, Jijiang @ 2014-05-17 7:48 UTC (permalink / raw)
To: dev, SMonderer; +Cc: xen-devel
In Linux kernel versions < 3.14 , the vstart is kernel virtual address, the API prototype below.
int xen_create_contiguous_region(unsigned long vstart, unsigned int order,
unsigned int address_bits)
In Linux kernel 3.14, the pstart is kernel physical address, the API prototype below.
int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
unsigned int address_bits,
dma_addr_t *dma_handle)
,so the mm_data->block_info[i].vir_addr cannot pass to xen_create_contiguous_region() directly for Linux kernel 3.14, the pstart should be mm_data->block_info[i].pfn * PAGE_SIZE in the Dom0 Driver.
#include <linux/errno.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <xen/xen.h>
#include <xen/page.h>
@@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
uint64_t pfn, vstart, vaddr;
uint32_t i, num_block, size;
int idx;
+ dma_addr_t dma_handle;
/* Allocate 2M memory once */
num_block = meminfo->size / 2;
@@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
* contiguous physical addresses, its maximum size is 2M.
*/
if (xen_create_contiguous_region(mm_data->block_info[i].pfn * PAGE_SIZE,
- DOM0_CONTIG_NUM_ORDER, 0) == 0) {
+ DOM0_CONTIG_NUM_ORDER, 0,
+ &dma_handle) == 0) {
mm_data->block_info[i].exchange_flag = 1;
mm_data->block_info[i].mfn =
pfn_to_mfn(mm_data->block_info[i].pfn);
Thanks
Frank Liu
-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
Sent: Wednesday, May 07, 2014 8:44 PM
To: Liu, Jijiang
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] could not l2fwd in DOM0
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Liu, Jijiang
> Sent: Wednesday, May 07, 2014 7:36 AM
> To: dev@dpdk.org
> Subject: Re: [dpdk-dev] could not l2fwd in DOM0
>
> Hi,
>
> I have checked source codes of xen_create_contiguous_region function
> in kernel 3.14, and found the dma_handle cannot be NULL.
>
> int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
> unsigned int address_bits,
> dma_addr_t *dma_handle) {
> unsigned long *in_frames = discontig_frames, out_frame;
> unsigned long flags;
> int success;
> unsigned long vstart = (unsigned long)phys_to_virt(pstart);
> ...
> *dma_handle = virt_to_machine(vstart).maddr;
> return success ? 0 : -ENOMEM;
> }
>
> Thanks
> Frank Liu
>
Thanks Frank,
I've changed the code as following but now the kernel module crashes.
diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
--- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
+++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
@@ -64,6 +64,7 @@
#include <linux/errno.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <xen/xen.h>
#include <xen/page.h>
@@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
uint64_t pfn, vstart, vaddr;
uint32_t i, num_block, size;
int idx;
+ dma_addr_t dma_handle;
/* Allocate 2M memory once */
num_block = meminfo->size / 2;
@@ -344,7 +346,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
* contiguous physical addresses, its maximum size is 2M.
*/
if (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
- DOM0_CONTIG_NUM_ORDER, 0) == 0) {
+ DOM0_CONTIG_NUM_ORDER, 0,
+ &dma_handle) == 0) {
mm_data->block_info[i].exchange_flag = 1;
mm_data->block_info[i].mfn =
pfn_to_mfn(mm_data->block_info[i].pfn);
Samuel
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Samuel Monderer
> Sent: Wednesday, April 30, 2014 1:54 AM
> To: dev@dpdk.org<mailto:dev@dpdk.org>
> Cc: Shimon Zadok
> Subject: [dpdk-dev] could not l2fwd in DOM0
>
> Hi,
>
> First I've encountered a compiling problem when compiling for DOM0 due
> to prototype change of the function xen_create_contiguous_region I
> made the following changes:
>
> diff --git a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> b/lib/librte_eal/linuxapp/xen index 87fa3e6..8addc21 100644
> --- a/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> +++ b/lib/librte_eal/linuxapp/xen_dom0/dom0_mm_misc.c
> @@ -64,6 +64,7 @@
> #include <linux/errno.h>
> #include <linux/vmalloc.h>
> #include <linux/mm.h>
> +//#include <linux/types.h>
>
> #include <xen/xen.h>
> #include <xen/page.h>
> @@ -309,6 +310,7 @@ dom0_prepare_memsegs(struct memory_info* meminfo,
> struct dom0_mm_data
> uint64_t pfn, vstart, vaddr;
> uint32_t i, num_block, size;
> int idx;
> + dma_addr_t *dma_handle = NULL;
>
> /* Allocate 2M memory once */
> num_block = meminfo->size / 2; @@ -344,7 +346,7 @@
> dom0_prepare_memsegs(struct memory_info* meminfo, struct dom0_mm_data
> * contiguous physical addresses, its maximum size is 2M.
> */
> if (xen_create_contiguous_region(mm_data->block_info[i].vir_addr,
> - DOM0_CONTIG_NUM_ORDER, 0) == 0) {
> + DOM0_CONTIG_NUM_ORDER, 0,
> + dma_handle) == 0) {
> mm_data->block_info[i].exchange_flag = 1;
> mm_data->block_info[i].mfn =
>
> pfn_to_mfn(mm_data->block_info[i].pfn);
>
> After that I tried to run l2fwd example and got a segmentation fault
>
> root@Smart:~/samuelm/dpdk/dpdk# modprobe uio
> root@Smart:~/samuelm/dpdk/dpdk# insmod ./x86_64-default-linuxapp-
> gcc/kmod/igb_uio.ko root@Smart:~/samuelm/dpdk/dpdk# insmod
> ./x86_64-default-linuxapp- gcc/kmod/rte_dom0_mm.ko
> root@Smart:~/samuelm/dpdk/dpdk# cd examples/l2fwd/build/
> root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# echo 2048 >
> /sys/kernel/mm/dom0-mm/memsize-mB/memsize
> root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build# ./l2fwd -c 3 -n 4
> --xen-dom0 -- -q 1 -p 3
> EAL: Detected lcore 0 as core 0 on socket 0
> EAL: Detected lcore 1 as core 0 on socket 0
> EAL: Setting up memory...
> Segmentation fault
> root@Smart:~/samuelm/dpdk/dpdk/examples/l2fwd/build#
>
> Has anyone already encountered this problem?
>
> Samuelm
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-06-09 16:02 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-29 17:53 [dpdk-dev] could not l2fwd in DOM0 Samuel Monderer
[not found] ` <CAD16F236028A64DBBC0158B1636EA4510E8816E@SHSMSX104.ccr.corp.intel.com>
2014-05-07 4:35 ` Liu, Jijiang
[not found] ` <9f34498d15cd400eb2db76212778c038@MUC-SRV-MBX2.advaoptical.com>
2014-05-07 12:44 ` Samuel Monderer
2014-05-17 7:48 Liu, Jijiang
2014-05-29 9:58 ` Thomas Monjalon
2014-05-29 10:12 ` Liu, Jijiang
2014-06-09 16:02 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).