From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: David Liu <dliu@iol.unh.edu>
Cc: dpdk-dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] DTS Test Nic Single Core Perf Scapy Naming Conflict
Date: Fri, 27 Nov 2020 01:07:38 +0000 [thread overview]
Message-ID: <1bbeb909300d4d6ab8bee66759fef71e@intel.com> (raw)
In-Reply-To: <CAAuqQpQQQw5TtV4sQ3np29SLkMKg4LHfb=d0SaM6gPVdiqW7Sw@mail.gmail.com>
Sorry, I am not quite understand your problem.
Do you mean that trex require same driver, but you use your build-in vfio-pci for one nic , and own-built on the other nic? If yes, I think you can make your own-built driver built-in, install it in kernel package.
From: David Liu <dliu@iol.unh.edu>
Sent: 2020年11月25日 4:08
To: Tu, Lijuan <lijuan.tu@intel.com>
Cc: dpdk-dev <dev@dpdk.org>
Subject: Re: DTS Test Nic Single Core Perf Scapy Naming Conflict
Hi Lijuan,
Thank you for the suggestions.
After that is resolved we encounter another issue.
Currently, the kernel version we have is 5.4.0-53 and has a vfio-pci built in. But we can not use the module from the nic_devbind.py.
Because we have vfio-pci drivers on the other machine's nic and trex require both machines to have the same driver on the nic be used.
Do you know what we can approach to solving this issue?
Thank,
David
On Thu, Nov 19, 2020 at 9:10 PM Tu, Lijuan <lijuan.tu@intel.com<mailto:lijuan.tu@intel.com>> wrote:
It seems Trex server is not launched successfully. So DTS as a client can’t connect it.
Here are some tips to make sure Trex can work before integrating into DTS.
• Simple manual test for trex
o Go to $TREX/scripts: cd ./scripts
o Launch dpdk application, e.g. testpmd on dut. Testpmd can be launch at first, also can be launch after trex server launched, but no matter when you run testpmd, dut must be up before staring trex server.
o Launch trex server: ./t-rex-64 -i -c 20 # -c means cores number, here we use 20 cores.
./t-rex-64 -c 20 -f /etc/trex_cfg.yaml # if you don't use default name
o Launch trex client and start traffic:
• ./trex-console, we give commands to trex through trex-console.
• start -f stl/bench.py -t size=64,vm=cached --port 0 -m 100% --force --pin (64 frame size + 100% LR + P0)
• start -f stl/bench.py -t size=64,vm=cached --port 1 -m 100% --force --pin (64 frame size + 100% LR + P1)
• tui (you will get a more friendship view of statistics)
• Note: you can get other traffic scripts from ./stl, stl/bench.py is just the one we used.
o Notes: to get the best performance, here are some suggestions:
• Give trex enough cores.
• Cores and NIC are in the same socket.
• Simply what you want trex to do, complicated computer will cause performance drop.
From: David Liu <dliu@iol.unh.edu<mailto:dliu@iol.unh.edu>>
Sent: 2020年11月20日 3:34
To: Tu, Lijuan <lijuan.tu@intel.com<mailto:lijuan.tu@intel.com>>
Cc: dpdk-dev <dev@dpdk.org<mailto:dev@dpdk.org>>
Subject: Re: DTS Test Nic Single Core Perf Scapy Naming Conflict
Hi Lijuan,
The DTS started without error but the nic single core test failed on a "connection timeout - no response from TRex server" when I tried to run it on an intel nic.
This happens when DTS uses arm-dell (traffic generator) to send packets to arm-gigabyte (DUT) using the Intel nic {Ethernet Controller XL710 for 40GbE QSFP+}
I wonder if you have any clue on this issue?
19/11/2020 19:05:55 TestNicSingleCorePerf: Test Case test_perf_nic_single_core Result ERROR: Traceback (most recent call last):
File "/opt/dts/framework/test_case.py", line 319, in _execute_test_case
case_obj()
File "tests/TestSuite_nic_single_core_perf.py", line 200, in test_perf_nic_single_core
self.perf_test(self.nb_ports)
File "tests/TestSuite_nic_single_core_perf.py", line 274, in perf_test
_, packets_received = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
File "/opt/dts/framework/pktgen_base.py", line 245, in measure_throughput
self._prepare_transmission(stream_ids=stream_ids)
File "/opt/dts/framework/pktgen_trex.py", line 778, in _prepare_transmission
self._conn.reset(ports=self._ports)
File "/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py", line 51, in wrap2
ret = f(*args, **kwargs)
File "/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py", line 339, in reset
self.clear_stats(ports)
File "/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py", line 51, in wrap2
ret = f(*args, **kwargs)
File "/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py", line 1492, in clear_stats
self._clear_stats_common(ports, clear_global, clear_xstats)
File "/opt/trex-v2.85/automation/trex_control_plane/interactive/trex/common/trex_client.py", line 2876, in _clear_stats_common
raise TRexError(rc)
trex.common.trex_exceptions.TRexError: ^[[1m*** [RPC] - Failed to get server response from tcp://172.18.0.40:4501<http://172.18.0.40:4501>^[[22m
19/11/2020 19:05:55 dts:
TEST SUITE ENDED: TestNicSingleCorePerf
19/11/2020 19:06:11 TestNicSingleCorePerf: tear_down_all failed:
Traceback (most recent call last):
File "/opt/dts/framework/test_case.py", line 430, in execute_tear_downall
self.tear_down_all()
File "tests/TestSuite_nic_single_core_perf.py", line 405, in tear_down_all
self.dut.build_install_dpdk(self.target)
File "/opt/dts/framework/project_dpdk.py", line 283, in build_install_dpdk
build_install_dpdk(target, extra_options)
File "/opt/dts/framework/project_dpdk.py", line 316, in build_install_dpdk_linux_meson
self.send_expect("rm -rf " + target, "#")
File "/opt/dts/framework/crb.py", line 93, in send_expect
return self.session.send_expect(cmds, expected, timeout, verify)
File "/opt/dts/framework/ssh_connection.py", line 64, in send_expect
out = self.session.send_expect(cmds, expected, timeout, verify)
File "/opt/dts/framework/ssh_pexpect.py", line 103, in send_expect
raise(e)
File "/opt/dts/framework/ssh_pexpect.py", line 90, in send_expect
ret = self.send_expect_base(command, expected, timeout)
File "/opt/dts/framework/ssh_pexpect.py", line 81, in send_expect_base
self.__prompt(command, timeout)
File "/opt/dts/framework/ssh_pexpect.py", line 149, in __prompt
raise TimeoutException(command, self.get_output_all()) from None
exception.TimeoutException: TIMEOUT on rm -rf x86_64-native-linuxapp-gcc
Thanks,
David
On Thu, Nov 19, 2020 at 12:56 PM David Liu <dliu@iol.unh.edu<mailto:dliu@iol.unh.edu>> wrote:
Hi Lijuan,
Thank you for the help.
I can run DTS without that error now,
Thanks,
David
On Tue, Nov 17, 2020 at 9:12 PM Tu, Lijuan <lijuan.tu@intel.com<mailto:lijuan.tu@intel.com>> wrote:
Hi David,
Snice some protocols are only supported by scapy 2.4.4, it's recemented that scapy 2.4.4 as major version for DTS.
However perf users might not care these advanced protocols, to be compatible with trex, dts captured these exceptions and let it go through.
Fix was contained in the latest DTS. Could you update it.
commit 362ae41844e1992163b4eed53a721729985644be
Author: Chen, BoX C <box.c.chen@intel.com<mailto:box.c.chen@intel.com>>
Date: Wed Nov 4 10:52:09 2020 +0800
framework: fix Trex mode not working
DTS requires Trex compatible scapy, modify package loading mode and scapy version verification rules
Signed-off-by: Chen, BoX C <box.c.chen@intel.com<mailto:box.c.chen@intel.com>>
From: David Liu <dliu@iol.unh.edu<mailto:dliu@iol.unh.edu>>
Sent: 2020年11月18日 4:24
To: Tu, Lijuan <lijuan.tu@intel.com<mailto:lijuan.tu@intel.com>>
Cc: dpdk-dev <dev@dpdk.org<mailto:dev@dpdk.org>>
Subject: DTS Test Nic Single Core Perf Scapy Naming Conflict
Hi Lijuan,
I currently have issues with running the Nic Single-Core Perf Test.
I believe this is the scapy naming conflict issue, so I follow the solution
mentioned on the website to replace system scapy with trex scapy.
Then I got into another error that I wasn't able to get pass:
root@arm-dell:/opt/dts# ./dts
Traceback (most recent call last):
File "./main.py", line 50, in <module>
import dts
File "/opt/dts/framework/dts.py", line 47, in <module>
from tester import Tester
File "/opt/dts/framework/tester.py", line 52, in <module>
from packet import SCAPY_IMP_CMD
File "/opt/dts/framework/packet.py", line 72, in <module>
locals().update({clazz: getattr(module, clazz)})
AttributeError: module 'scapy.contrib.gtp' has no attribute 'GTPPDUSessionContainer'
Do you have any clue how to fix this?
Thanks.
David
prev parent reply other threads:[~2020-11-27 1:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-17 20:23 David Liu
2020-11-18 2:12 ` Tu, Lijuan
2020-11-19 17:56 ` David Liu
2020-11-19 19:34 ` David Liu
2020-11-20 2:10 ` Tu, Lijuan
2020-11-24 20:08 ` David Liu
2020-11-27 1:07 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1bbeb909300d4d6ab8bee66759fef71e@intel.com \
--to=lijuan.tu@intel.com \
--cc=dev@dpdk.org \
--cc=dliu@iol.unh.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).