An additional change is that failure to detect module should not be fatal,
but an error like other EAL setup problems, allowing the application
to recover.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>

---
 app/chkincs/test_pci.c                  |    3 ++-
 app/test/test_pci.c                     |    4 ++--
 lib/librte_eal/common/include/rte_pci.h |    5 ++---
 lib/librte_eal/linuxapp/eal/eal_pci.c   |    9 ++-------
 lib/librte_pmd_igb/e1000_ethdev.c       |    2 +-
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c     |    4 ++--
 6 files changed, 11 insertions(+), 16 deletions(-)

--- a/lib/librte_eal/common/include/rte_pci.h	2013-05-29 08:45:38.000000000 -0700
+++ b/lib/librte_eal/common/include/rte_pci.h	2013-05-29 09:02:50.000000000 -0700
@@ -151,12 +151,11 @@ struct rte_pci_driver {
 	pci_devinit_t *devinit;                 /**< Device init. function. */
 	struct rte_pci_id *id_table;            /**< ID table, NULL terminated. */
 	uint32_t drv_flags;                     /**< Flags contolling handling of device. */
+	const char *module_name;		/**< Associated kernel module */
 };
 
-/** Device needs igb_uio kernel module */
-#define RTE_PCI_DRV_NEED_IGB_UIO 0x0001
 /** Device driver must be registered several times until failure */
-#define RTE_PCI_DRV_MULTIPLE 0x0002
+#define RTE_PCI_DRV_MULTIPLE 0x0001
 
 /**
  * Probe the PCI bus for registered drivers.
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c	2013-03-28 08:50:50.000000000 -0700
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c	2013-05-29 09:04:00.000000000 -0700
@@ -76,7 +76,7 @@
  * This code is used to simulate a PCI probe by parsing information in
  * sysfs. Moreover, when a registered driver matches a device, the
  * kernel driver currently using it is unloaded and replaced by
- * igb_uio module, which is a very minimal userland driver for Intel
+ * a module, which is a very minimal userland driver for Intel
  * network card, only providing access to PCI BAR to applications, and
  * enabling bus master.
  */
@@ -84,8 +84,6 @@
 
 #define PROC_MODULES "/proc/modules"
 
-#define IGB_UIO_NAME "igb_uio"
-
 #define UIO_NEWID "/sys/bus/pci/drivers/%s/new_id"
 #define UIO_BIND  "/sys/bus/pci/drivers/%s/bind"
 
@@ -700,12 +698,9 @@ int
 rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev)
 {
 	struct rte_pci_id *id_table;
-	const char *module_name = NULL;
+	const char *module_name = dr->module_name;
 	int uio_status = -1;
 
-	if (dr->drv_flags & RTE_PCI_DRV_NEED_IGB_UIO)
-		module_name = IGB_UIO_NAME;
-
 	uio_status = pci_uio_check_module(module_name);
 
 	for (id_table = dr->id_table ; id_table->vendor_id != 0; id_table++) {
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c	2013-05-29 08:45:38.000000000 -0700
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c	2013-05-29 16:08:07.544000027 -0700
@@ -547,7 +547,7 @@ static struct eth_driver rte_ixgbe_pmd =
 	{
 		.name = "rte_ixgbe_pmd",
 		.id_table = pci_id_ixgbe_map,
-		.drv_flags = RTE_PCI_DRV_NEED_IGB_UIO,
+		.module_name = "igb_uio",
 	},
 	.eth_dev_init = eth_ixgbe_dev_init,
 	.dev_private_size = sizeof(struct ixgbe_adapter),
@@ -560,7 +560,7 @@ static struct eth_driver rte_ixgbevf_pmd
 	{
 		.name = "rte_ixgbevf_pmd",
 		.id_table = pci_id_ixgbevf_map,
-		.drv_flags = RTE_PCI_DRV_NEED_IGB_UIO,
+		.module_name = "igb_uio",
 	},
 	.eth_dev_init = eth_ixgbevf_dev_init,
 	.dev_private_size = sizeof(struct ixgbe_adapter),
--- a/app/test/test_pci.c	2013-03-28 08:50:50.000000000 -0700
+++ b/app/test/test_pci.c	2013-05-29 16:05:22.881670915 -0700
@@ -69,7 +69,7 @@ static int my_driver_init(struct rte_pci
 			  struct rte_pci_device *dev);
 
 /*
- * To test cases where RTE_PCI_DRV_NEED_IGB_UIO is set, and isn't set, two
+ * To test cases where module_name is set, and isn't set, two
  * drivers are created (one with IGB devices, the other with IXGBE devices).
  */
 
@@ -101,7 +101,7 @@ struct rte_pci_driver my_driver = {
 	.name = "test_driver",
 	.devinit = my_driver_init,
 	.id_table = my_driver_id,
-	.drv_flags = RTE_PCI_DRV_NEED_IGB_UIO,
+	.module_name = "igb_uio",
 };
 
 struct rte_pci_driver my_driver2 = {
--- a/app/chkincs/test_pci.c	2013-03-28 08:50:50.210414181 -0700
+++ b/app/chkincs/test_pci.c	2013-05-29 16:07:43.880238599 -0700
@@ -64,7 +64,8 @@ struct rte_pci_driver my_driver = {
 	"test_driver",
 	my_driver_init,
 	my_driver_id,
-	RTE_PCI_DRV_NEED_IGB_UIO,
+	0,
+	"igb_uio",
 };
 
 static int
--- a/lib/librte_pmd_igb/e1000_ethdev.c	2013-05-29 08:45:38.888471864 -0700
+++ b/lib/librte_pmd_igb/e1000_ethdev.c	2013-05-29 16:04:50.410003570 -0700
@@ -336,7 +336,7 @@ static struct eth_driver rte_igb_pmd = {
 	{
 		.name = "rte_igb_pmd",
 		.id_table = pci_id_igb_map,
-		.drv_flags = RTE_PCI_DRV_NEED_IGB_UIO,
+		.module_name = "igb_uio",
 	},
 	.eth_dev_init = eth_igb_dev_init,
 	.dev_private_size = sizeof(struct e1000_adapter),