DPDK patches and discussions
 help / color / mirror / Atom feed
From: Chris Wright <chrisw@redhat.com>
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 00/16] [RFC] [VFIO] Add VFIO support to DPDK
Date: Thu, 1 May 2014 10:00:15 -0700	[thread overview]
Message-ID: <20140501170015.GC24396@x220.localdomain> (raw)
In-Reply-To: <20140501091241.4786e99c@nehalam.linuxnetplumber.net>

* Stephen Hemminger (stephen@networkplumber.org) wrote:
> On Thu, 1 May 2014 11:05:38 +0000
> "Burakov, Anatoly" <anatoly.burakov@intel.com> wrote:
> 
> > This patchset adds support for using VFIO instead of IGB_UIO to
> > map the device BARs.
> > 
> > VFIO is a kernel 3.6+ driver allowing secure DMA from userspace
> > by means of using IOMMU instead of working directly with physical
> > memory like igb_uio does.
> > 
> > Short summary:
> > * Adding support for VFIO in EAL PCI code
> > * Adding new command-line parameter for VFIO interrupt type
> > * Adding support for VFIO in setup.sh
> > * Renaming igb_uio_bind to dpdk_nic_bind and adding support for
> >   VFIO there
> > * Removing PCI ID list from igb_uio, effectively making it another
> >   generic PCI driver similar to pci_stub, vfio-pci et al
> > * Adding autotest for VFIO interrupt types
> > * Making igb_uio and VFIO compilation optional
> > 
> > I'm submitting this as an RFC because this patch is based off
> > current dpdk.org branch with David Marchand's RTE_EAL_UNBIND_PORTS
> > patchset. IOW, this will *not* apply to the dpdk.org tree *unless* you
> > also apply David's patches beforehand.
> > 
> > Signed-off by: Anatoly Burakov <anatoly.burakov@intel.com>
> > 
> > Anatoly Burakov (16):
> >   Separate igb_uio mapping into a separate file
> >   Distinguish between legitimate failures and non-fatal errors
> >   Rename RTE_PCI_DRV_NEED_IGB_UIO to RTE_PCI_DRV_NEED_MAPPING
> >   Make igb_uio compilation optional
> >   Moved interrupt type out of igb_uio
> >   Add support for VFIO in Linuxapp targets
> >   Add support for VFIO interrupts, add VFIO header
> >   Add support for mapping devices through VFIO.
> >   Enable VFIO device binding
> >   Added support for selecting VFIO interrupt type from EAL command-line
> >   Make --no-huge use mmap instead of malloc.
> >   Adding unit tests for VFIO EAL command-line parameter
> >   Removed PCI ID table from igb_uio
> >   Renamed igb_uio_bind to dpdk_nic_bind
> >   Added support for VFIO drivers in dpdk_nic_bind.py
> >   Adding support for VFIO to setup.sh
> > 
> >  app/test/test_eal_flags.c                          |  24 +
> >  app/test/test_pci.c                                |   4 +-
> >  config/defconfig_i686-default-linuxapp-gcc         |   2 +
> >  config/defconfig_i686-default-linuxapp-icc         |   2 +
> >  config/defconfig_x86_64-default-linuxapp-gcc       |   2 +
> >  config/defconfig_x86_64-default-linuxapp-icc       |   2 +
> >  lib/librte_eal/bsdapp/eal/eal_pci.c                |   2 +-
> >  lib/librte_eal/common/Makefile                     |   1 +
> >  lib/librte_eal/common/eal_common_pci.c             |  17 +-
> >  lib/librte_eal/common/include/rte_pci.h            |   7 +-
> >  .../common/include/rte_pci_dev_feature_defs.h      |  46 ++
> >  .../common/include/rte_pci_dev_features.h          |  42 ++
> >  lib/librte_eal/linuxapp/Makefile                   |   2 +
> >  lib/librte_eal/linuxapp/eal/Makefile               |   6 +-
> >  lib/librte_eal/linuxapp/eal/eal.c                  |  35 +
> >  lib/librte_eal/linuxapp/eal/eal_interrupts.c       | 203 +++++-
> >  lib/librte_eal/linuxapp/eal/eal_memory.c           |   8 +-
> >  lib/librte_eal/linuxapp/eal/eal_pci.c              | 480 ++------------
> >  lib/librte_eal/linuxapp/eal/eal_pci_uio.c          | 416 ++++++++++++
> >  lib/librte_eal/linuxapp/eal/eal_pci_vfio.c         | 709 +++++++++++++++++++++
> >  lib/librte_eal/linuxapp/eal/eal_pci_vfio_socket.c  | 367 +++++++++++
> >  .../linuxapp/eal/include/eal_internal_cfg.h        |   3 +
> >  lib/librte_eal/linuxapp/eal/include/eal_pci_init.h | 120 ++++
> >  lib/librte_eal/linuxapp/eal/include/eal_vfio.h     |  55 ++
> >  .../linuxapp/eal/include/exec-env/rte_interrupts.h |   7 +-
> >  lib/librte_eal/linuxapp/igb_uio/igb_uio.c          |  70 +-
> >  lib/librte_pmd_e1000/em_ethdev.c                   |   2 +-
> >  lib/librte_pmd_e1000/igb_ethdev.c                  |   4 +-
> >  lib/librte_pmd_ixgbe/ixgbe_ethdev.c                |   4 +-
> >  lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c            |   2 +-
> >  tools/dpdk_nic_bind.py                             | 500 +++++++++++++++
> >  tools/igb_uio_bind.py                              | 485 --------------
> >  tools/setup.sh                                     | 168 ++++-
> >  33 files changed, 2797 insertions(+), 1000 deletions(-)
> >  create mode 100644 lib/librte_eal/common/include/rte_pci_dev_feature_defs.h
> >  create mode 100644 lib/librte_eal/common/include/rte_pci_dev_features.h
> >  create mode 100644 lib/librte_eal/linuxapp/eal/eal_pci_uio.c
> >  create mode 100644 lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> >  create mode 100644 lib/librte_eal/linuxapp/eal/eal_pci_vfio_socket.c
> >  create mode 100644 lib/librte_eal/linuxapp/eal/include/eal_pci_init.h
> >  create mode 100644 lib/librte_eal/linuxapp/eal/include/eal_vfio.h
> >  create mode 100755 tools/dpdk_nic_bind.py
> >  delete mode 100755 tools/igb_uio_bind.py
> 
> Will this work in guest? or only on bare metal?

hmm, vfio requires iommu support, however virtio pmd?

  reply	other threads:[~2014-05-01 17:18 UTC|newest]

Thread overview: 160+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-01 11:05 Burakov, Anatoly
2014-05-01 16:12 ` Stephen Hemminger
2014-05-01 17:00   ` Chris Wright [this message]
2014-05-02  9:00     ` Burakov, Anatoly
2014-05-05 14:44       ` Vincent JARDIN
2014-05-06  8:41         ` Burakov, Anatoly
2014-05-02  8:58   ` Burakov, Anatoly
2014-09-08  8:20     ` Sujith Sankar (ssujith)
2014-09-08  8:21       ` Burakov, Anatoly
2014-09-08  8:27         ` Sujith Sankar (ssujith)
2014-09-08  8:30           ` Burakov, Anatoly
2014-09-08  8:33             ` Sujith Sankar (ssujith)
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 00/16] " Anatoly Burakov
2014-05-28 14:37   ` [dpdk-dev] [PATCH v3 00/20] " Anatoly Burakov
2014-05-28 14:37     ` [dpdk-dev] [PATCH v3 01/20] pci: move open() out of pci_map_resource, rename structs Anatoly Burakov
2014-05-28 14:37     ` [dpdk-dev] [PATCH v3 02/20] pci: move uio mapping code to a separate file Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 03/20] pci: fixing errors in a previous commit found by checkpatch Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 04/20] pci: distinguish between legitimate failures and non-fatal errors Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 05/20] pci: Rename RTE_PCI_DRV_NEED_IGB_UIO to RTE_PCI_DRV_NEED_MAPPING Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 06/20] igb_uio: make igb_uio compilation optional Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 07/20] igb_uio: Moved interrupt type out of igb_uio Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 08/20] vfio: add support for VFIO in Linuxapp targets Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 09/20] vfio: add VFIO header Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 10/20] interrupts: Add support for VFIO interrupts Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 11/20] eal: remove -Wno-return-type for non-existent eal_hpet.c Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 12/20] vfio: create mapping code for VFIO Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 13/20] vfio: add multiprocess support Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 14/20] pci: enable VFIO device binding Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 15/20] eal: added support for selecting VFIO interrupt type from EAL command-line Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 16/20] eal: make --no-huge use mmap instead of malloc Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 17/20] test app: adding unit tests for VFIO EAL command-line parameter Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 18/20] igb_uio: Removed PCI ID table from igb_uio Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 19/20] binding script: Renamed igb_uio_bind to dpdk_nic_bind Anatoly Burakov
2014-05-28 14:38     ` [dpdk-dev] [PATCH v3 20/20] setup script: adding support for VFIO to setup.sh Anatoly Burakov
2014-06-03 10:17     ` [dpdk-dev] [PATCH v4 00/20] Add VFIO support to DPDK Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 01/20] pci: move open() out of pci_map_resource, rename structs Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 02/20] pci: move uio mapping code to a separate file Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 03/20] pci: fixing errors in a previous commit found by checkpatch Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 04/20] pci: distinguish between legitimate failures and non-fatal errors Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 05/20] pci: Rename RTE_PCI_DRV_NEED_IGB_UIO to RTE_PCI_DRV_NEED_MAPPING Anatoly Burakov
2014-06-04  9:03         ` Burakov, Anatoly
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 06/20] igb_uio: make igb_uio compilation optional Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 07/20] igb_uio: Moved interrupt type out of igb_uio Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 08/20] vfio: add support for VFIO in Linuxapp targets Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 09/20] vfio: add VFIO header Anatoly Burakov
2014-06-03 10:17       ` [dpdk-dev] [PATCH v4 10/20] interrupts: Add support for VFIO interrupts Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 11/20] eal: remove -Wno-return-type for non-existent eal_hpet.c Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 12/20] vfio: create mapping code for VFIO Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 13/20] vfio: add multiprocess support Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 14/20] pci: enable VFIO device binding Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 15/20] eal: added support for selecting VFIO interrupt type from EAL command-line Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 16/20] eal: make --no-huge use mmap instead of malloc Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 17/20] test app: adding unit tests for VFIO EAL command-line parameter Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 18/20] igb_uio: Removed PCI ID table from igb_uio Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 19/20] binding script: Renamed igb_uio_bind to dpdk_nic_bind Anatoly Burakov
2014-06-03 10:18       ` [dpdk-dev] [PATCH v4 20/20] setup script: adding support for VFIO to setup.sh Anatoly Burakov
2014-06-10 11:11       ` [dpdk-dev] [PATCH v5 00/20] Add VFIO support to DPDK Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 01/20] pci: move open() out of pci_map_resource, rename structs Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 02/20] pci: move uio mapping code to a separate file Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 03/20] pci: fixing errors in a previous commit found by checkpatch Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 04/20] pci: distinguish between legitimate failures and non-fatal errors Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 05/20] pci: Rename RTE_PCI_DRV_NEED_IGB_UIO to RTE_PCI_DRV_NEED_MAPPING Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 06/20] igb_uio: make igb_uio compilation optional Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 07/20] igb_uio: Moved interrupt type out of igb_uio Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 08/20] vfio: add support for VFIO in Linuxapp targets Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 09/20] vfio: add VFIO header Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 10/20] interrupts: Add support for VFIO interrupts Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 11/20] eal: remove -Wno-return-type for non-existent eal_hpet.c Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 12/20] vfio: create mapping code for VFIO Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 13/20] vfio: add multiprocess support Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 14/20] pci: enable VFIO device binding Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 15/20] eal: added support for selecting VFIO interrupt type from EAL command-line Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 16/20] eal: make --no-huge use mmap instead of malloc Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 17/20] test app: adding unit tests for VFIO EAL command-line parameter Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 18/20] igb_uio: Removed PCI ID table from igb_uio Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 19/20] binding script: Renamed igb_uio_bind to dpdk_nic_bind Anatoly Burakov
2014-06-10 11:11         ` [dpdk-dev] [PATCH v5 20/20] setup script: adding support for VFIO to setup.sh Anatoly Burakov
2014-06-13 14:38         ` [dpdk-dev] [PATCH v5 00/20] Add VFIO support to DPDK Burakov, Anatoly
2014-06-13 14:52         ` [dpdk-dev] [PATCH v6 " Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 01/20] pci: move open() out of pci_map_resource, rename structs Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 02/20] pci: move uio mapping code to a separate file Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 03/20] pci: fixing errors in a previous commit found by checkpatch Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 04/20] pci: distinguish between legitimate failures and non-fatal errors Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 05/20] pci: Rename RTE_PCI_DRV_NEED_IGB_UIO to RTE_PCI_DRV_NEED_MAPPING Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 06/20] igb_uio: make igb_uio compilation optional Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 07/20] igb_uio: Moved interrupt type out of igb_uio Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 08/20] vfio: add support for VFIO in Linuxapp targets Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 09/20] vfio: add VFIO header Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 10/20] interrupts: Add support for VFIO interrupts Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 11/20] eal: remove -Wno-return-type for non-existent eal_hpet.c Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 12/20] vfio: create mapping code for VFIO Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 13/20] vfio: add multiprocess support Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 14/20] pci: enable VFIO device binding Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 15/20] eal: added support for selecting VFIO interrupt type from EAL command-line Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 16/20] eal: make --no-huge use mmap instead of malloc Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 17/20] test app: adding unit tests for VFIO EAL command-line parameter Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 18/20] igb_uio: Removed PCI ID table from igb_uio Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 19/20] binding script: Renamed igb_uio_bind to dpdk_nic_bind Anatoly Burakov
2014-06-13 14:52           ` [dpdk-dev] [PATCH v6 20/20] setup script: adding support for VFIO to setup.sh Anatoly Burakov
2014-06-16  9:08           ` [dpdk-dev] [PATCH v6 00/20] Add VFIO support to DPDK Thomas Monjalon
2014-06-16  9:28             ` Burakov, Anatoly
2014-06-16 13:07               ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 01/16] Separate igb_uio mapping into a separate file Anatoly Burakov
2014-05-21 12:42   ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 02/16] Distinguish between legitimate failures and non-fatal errors Anatoly Burakov
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 03/16] Rename RTE_PCI_DRV_NEED_IGB_UIO to RTE_PCI_DRV_NEED_MAPPING Anatoly Burakov
2014-05-21 12:55   ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 04/16] Make igb_uio compilation optional Anatoly Burakov
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 05/16] Moved interrupt type out of igb_uio Anatoly Burakov
2014-05-21 13:38   ` Thomas Monjalon
2014-05-21 13:44     ` Burakov, Anatoly
2014-05-21 13:46   ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 06/16] Add support for VFIO in Linuxapp targets Anatoly Burakov
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 07/16] Add support for VFIO interrupts, add VFIO header Anatoly Burakov
2014-05-21 16:07   ` Thomas Monjalon
2014-05-22 12:45     ` Burakov, Anatoly
2014-05-22 12:49       ` Thomas Monjalon
2014-05-22 12:54         ` Burakov, Anatoly
2014-05-27 14:29           ` Burakov, Anatoly
2014-05-27 14:38             ` Thomas Monjalon
2014-05-27 14:40               ` Burakov, Anatoly
2014-05-27 14:46                 ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 08/16] Add support for mapping devices through VFIO Anatoly Burakov
2014-05-22 11:53   ` Thomas Monjalon
2014-05-22 12:06     ` Burakov, Anatoly
2014-05-22 12:28       ` Thomas Monjalon
2014-05-22 12:37         ` Burakov, Anatoly
2014-05-22 12:46           ` Thomas Monjalon
2014-05-22 12:54             ` Burakov, Anatoly
2014-05-27 16:21     ` Burakov, Anatoly
2014-05-27 16:36       ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 09/16] Enable VFIO device binding Anatoly Burakov
2014-05-22 12:03   ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 10/16] Added support for selecting VFIO interrupt type from EAL command-line Anatoly Burakov
2014-05-20  7:40   ` Stephen Hemminger
2014-05-20  8:33     ` Burakov, Anatoly
2014-05-20 11:23       ` Stephen Hemminger
2014-05-20 11:26         ` Burakov, Anatoly
2014-05-20 21:39           ` Stephen Hemminger
2014-05-22 12:34   ` Thomas Monjalon
2014-05-28 10:35     ` Burakov, Anatoly
2014-05-28 11:24       ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 11/16] Make --no-huge use mmap instead of malloc Anatoly Burakov
2014-05-22 13:04   ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 12/16] Adding unit tests for VFIO EAL command-line parameter Anatoly Burakov
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 13/16] Removed PCI ID table from igb_uio Anatoly Burakov
2014-05-22 13:13   ` Thomas Monjalon
2014-05-22 13:24     ` Burakov, Anatoly
2014-05-22 13:28       ` Thomas Monjalon
2014-05-22 23:11     ` Stephen Hemminger
2014-05-23  7:48       ` Thomas Monjalon
2014-05-23  0:10     ` Antti Kantee
2014-05-28 13:45       ` Thomas Monjalon
2014-05-28 14:50         ` Antti Kantee
2014-05-28 16:24         ` Stephen Hemminger
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 14/16] Renamed igb_uio_bind to dpdk_nic_bind Anatoly Burakov
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 15/16] Added support for VFIO drivers in dpdk_nic_bind.py Anatoly Burakov
2014-05-22 13:23   ` Thomas Monjalon
2014-05-19 15:51 ` [dpdk-dev] [PATCH v2 16/16] Adding support for VFIO to setup.sh Anatoly Burakov
2014-05-22 13:25   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140501170015.GC24396@x220.localdomain \
    --to=chrisw@redhat.com \
    --cc=dev@dpdk.org \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).