From: Stephen Hemminger <stephen@networkplumber.org>
To: Thomas Monjalon <thomas.monjalon@6wind.com>
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 10/10] igb_uio: fix check patch warnings
Date: Fri, 18 Jul 2014 09:14:57 -0700 [thread overview]
Message-ID: <20140718161532.274331752@networkplumber.org> (raw)
In-Reply-To: <20140718161447.020882834@networkplumber.org>
[-- Attachment #1: igb_uio-checkpatch.patch --]
[-- Type: text/plain, Size: 4588 bytes --]
Fix whitespace and other problems reported by checkpatch.
This didi find a real bug in that the setup code was returning
positive value for errors which goes against convention and might have
caused a problem.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c 2014-07-18 08:47:24.709604886 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c 2014-07-18 09:01:42.336616148 -0700
@@ -65,7 +65,7 @@ igbuio_get_uio_pci_dev(struct uio_info *
}
/* sriov sysfs */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34)
static int pci_num_vf(struct pci_dev *dev)
struct iov {
int pos;
@@ -75,7 +75,7 @@ static int pci_num_vf(struct pci_dev *de
u16 total;
u16 initial;
u16 nr_virtfn;
- } *iov = (struct iov*)dev->sriov;
+ } *iov = (struct iov *)dev->sriov;
if (!dev->is_physfn)
return 0;
@@ -204,9 +204,9 @@ store_max_read_request_size(struct devic
static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs);
#ifdef RTE_PCI_CONFIG
-static DEVICE_ATTR(extended_tag, S_IRUGO | S_IWUSR, show_extended_tag, \
+static DEVICE_ATTR(extended_tag, S_IRUGO | S_IWUSR, show_extended_tag,
store_extended_tag);
-static DEVICE_ATTR(max_read_request_size, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(max_read_request_size, S_IRUGO | S_IWUSR,
show_max_read_request_size, store_max_read_request_size);
#endif
@@ -216,7 +216,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_extended_tag.attr,
&dev_attr_max_read_request_size.attr,
#endif
- NULL,
+ NULL,
};
static const struct attribute_group dev_attr_grp = {
@@ -224,7 +224,7 @@ static const struct attribute_group dev_
};
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
/* Check if INTX works to control irq's.
* Set's INTX_DISABLE flag and reads it back
*/
@@ -378,6 +378,7 @@ static int
igbuio_dom0_mmap_phys(struct uio_info *info, struct vm_area_struct *vma)
{
int idx;
+
idx = (int)vma->vm_pgoff;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
vma->vm_page_prot.pgprot |= _PAGE_IOMAP;
@@ -400,8 +401,9 @@ igbuio_dom0_pci_mmap(struct uio_info *in
if (vma->vm_pgoff >= MAX_UIO_MAPS)
return -EINVAL;
- if(info->mem[vma->vm_pgoff].size == 0)
- return -EINVAL;
+
+ if (info->mem[vma->vm_pgoff].size == 0)
+ return -EINVAL;
idx = (int)vma->vm_pgoff;
switch (info->mem[idx].memtype) {
@@ -423,8 +425,8 @@ igbuio_pci_setup_iomem(struct pci_dev *d
unsigned long addr, len;
void *internal_addr;
- if (sizeof(info->mem) / sizeof (info->mem[0]) <= n)
- return (EINVAL);
+ if (sizeof(info->mem) / sizeof(info->mem[0]) <= n)
+ return -EINVAL;
addr = pci_resource_start(dev, pci_bar);
len = pci_resource_len(dev, pci_bar);
@@ -448,20 +450,20 @@ igbuio_pci_setup_ioport(struct pci_dev *
{
unsigned long addr, len;
- if (sizeof(info->port) / sizeof (info->port[0]) <= n)
- return (EINVAL);
+ if (sizeof(info->port) / sizeof(info->port[0]) <= n)
+ return -EINVAL;
addr = pci_resource_start(dev, pci_bar);
len = pci_resource_len(dev, pci_bar);
if (addr == 0 || len == 0)
- return (-1);
+ return -EINVAL;
info->port[n].name = name;
info->port[n].start = addr;
info->port[n].size = len;
info->port[n].porttype = UIO_PORT_X86;
- return (0);
+ return 0;
}
/* Unmap previously ioremap'd resources */
@@ -469,6 +471,7 @@ static void
igbuio_pci_release_iomem(struct uio_info *info)
{
int i;
+
for (i = 0; i < MAX_UIO_MAPS; i++) {
if (info->mem[i].internal_addr)
iounmap(info->mem[i].internal_addr);
@@ -497,14 +500,16 @@ igbuio_setup_bars(struct pci_dev *dev, s
pci_resource_start(dev, i) != 0) {
flags = pci_resource_flags(dev, i);
if (flags & IORESOURCE_MEM) {
- if ((ret = igbuio_pci_setup_iomem(dev, info,
- iom, i, bar_names[i])) != 0)
- return (ret);
+ ret = igbuio_pci_setup_iomem(dev, info, iom,
+ i, bar_names[i]);
+ if (ret != 0)
+ return ret;
iom++;
} else if (flags & IORESOURCE_IO) {
- if ((ret = igbuio_pci_setup_ioport(dev, info,
- iop, i, bar_names[i])) != 0)
- return (ret);
+ ret = igbuio_pci_setup_ioport(dev, info, iop,
+ i, bar_names[i]);
+ if (ret != 0)
+ return ret;
iop++;
}
}
@@ -513,7 +518,7 @@ igbuio_setup_bars(struct pci_dev *dev, s
return (iom != 0) ? ret : -ENOENT;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
static int __devinit
#else
static int
next prev parent reply other threads:[~2014-07-18 16:14 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 16:14 [dpdk-dev] [PATCH 00/10] igb_uio related patches Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 01/10] igb_uio: use kernel standard log message Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 02/10] igb_uio: use standard uio naming Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 03/10] igb_uio: dont wrap pci_num_vf function needlessly Stephen Hemminger
2014-07-23 8:20 ` Thomas Monjalon
2014-07-18 16:14 ` [dpdk-dev] [PATCH 04/10] igb_uio: msix cleanups Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 05/10] igb_uio: propogate error numbers in probe code Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 06/10] igb_uio: make irq mode param read-only Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 07/10] igb_uio: fix IRQ mode handling Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 08/10] igb_uio: add missing locking to config access Stephen Hemminger
2014-07-18 16:14 ` [dpdk-dev] [PATCH 09/10] igb_uio: allow msi mode Stephen Hemminger
2014-07-18 16:14 ` Stephen Hemminger [this message]
2014-07-19 0:16 ` [dpdk-dev] [PATCH 00/10] igb_uio related patches Thomas Monjalon
2014-07-20 8:14 ` Yerden Zhumabekov
2014-07-21 10:28 ` Thomas Monjalon
2014-07-21 12:03 ` [dpdk-dev] [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls Yerden Zhumabekov
2014-07-21 12:03 ` [dpdk-dev] [igb_uio PATCH 1/3] igb_uio: fixed typos Yerden Zhumabekov
2014-07-21 12:03 ` [dpdk-dev] [igb_uio PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers Yerden Zhumabekov
2014-07-21 20:42 ` Stephen Hemminger
2014-07-21 20:50 ` Thomas Monjalon
2014-07-22 12:57 ` Thomas Monjalon
2014-07-21 12:03 ` [dpdk-dev] [igb_uio PATCH 3/3] igb_uio: renaming pci config lock/unlock functions Yerden Zhumabekov
2014-07-21 19:51 ` [dpdk-dev] [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls Thomas Monjalon
2014-07-22 13:07 ` Thomas Monjalon
2014-07-24 21:50 ` Thomas Monjalon
2014-07-25 16:51 ` Stephen Hemminger
2014-07-21 15:38 ` [dpdk-dev] [PATCH " Yerden Zhumabekov
2014-07-21 15:38 ` [dpdk-dev] [PATCH 1/3] igb_uio: fixed typos Yerden Zhumabekov
2014-07-21 15:38 ` [dpdk-dev] [PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers Yerden Zhumabekov
2014-07-21 15:38 ` [dpdk-dev] [PATCH 3/3] igb_uio: renaming pci config lock/unlock functions Yerden Zhumabekov
2014-07-21 19:54 ` [dpdk-dev] [PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140718161532.274331752@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).