Re: [dpdk-dev] [PATCH 06/12] mbuf: add functions to get the name of an ol_flag

[Bruce Richardson <bruce.richardson@intel.com>]

On Mon, Nov 10, 2014 at 04:59:20PM +0100, Olivier Matz wrote:
> In test-pmd (rxonly.c), the code is able to dump the list of ol_flags.
> The issue is that the list of flags in the application has to be
> synchronized with the flags defined in rte_mbuf.h.
> 
> This patch introduces 2 new functions rte_get_rx_ol_flag_name()
> and rte_get_tx_ol_flag_name() that returns the name of a flag from
> its mask. It also fixes rxonly.c to use this new functions and to
> display the proper flags.

Good idea. Couple of minor comments below.

/Bruce

> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> ---
>  app/test-pmd/rxonly.c      | 36 ++++++++--------------------
>  lib/librte_mbuf/rte_mbuf.h | 60 ++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 70 insertions(+), 26 deletions(-)
> 
> diff --git a/app/test-pmd/rxonly.c b/app/test-pmd/rxonly.c
> index 4410c3d..e7cd7e2 100644
> --- a/app/test-pmd/rxonly.c
> +++ b/app/test-pmd/rxonly.c
> @@ -71,26 +71,6 @@
>  
>  #include "testpmd.h"
>  
> -#define MAX_PKT_RX_FLAGS 13
> -static const char *pkt_rx_flag_names[MAX_PKT_RX_FLAGS] = {
> -	"VLAN_PKT",
> -	"RSS_HASH",
> -	"PKT_RX_FDIR",
> -	"IP_CKSUM",
> -	"IP_CKSUM_BAD",
> -
> -	"IPV4_HDR",
> -	"IPV4_HDR_EXT",
> -	"IPV6_HDR",
> -	"IPV6_HDR_EXT",
> -
> -	"IEEE1588_PTP",
> -	"IEEE1588_TMST",
> -
> -	"TUNNEL_IPV4_HDR",
> -	"TUNNEL_IPV6_HDR",
> -};
> -
>  static inline void
>  print_ether_addr(const char *what, struct ether_addr *eth_addr)
>  {
> @@ -219,12 +199,16 @@ pkt_burst_receive(struct fwd_stream *fs)
>  		printf(" - Receive queue=0x%x", (unsigned) fs->rx_queue);
>  		printf("\n");
>  		if (ol_flags != 0) {
> -			int rxf;
> -
> -			for (rxf = 0; rxf < MAX_PKT_RX_FLAGS; rxf++) {
> -				if (ol_flags & (1 << rxf))
> -					printf("  PKT_RX_%s\n",
> -					       pkt_rx_flag_names[rxf]);
> +			unsigned rxf;
> +			const char *name;
> +
> +			for (rxf = 0; rxf < sizeof(mb->ol_flags) * 8; rxf++) {
> +				if ((ol_flags & (1ULL << rxf)) == 0)
> +					continue;
> +				name = rte_get_rx_ol_flag_name(1ULL << rxf);
> +				if (name == NULL)
> +					continue;
> +				printf("  %s\n", name);
>  			}
>  		}
>  		rte_pktmbuf_free(mb);
> diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> index ff11b84..bcd8996 100644
> --- a/lib/librte_mbuf/rte_mbuf.h
> +++ b/lib/librte_mbuf/rte_mbuf.h
> @@ -129,6 +129,66 @@ extern "C" {
>  /* Use final bit of flags to indicate a control mbuf */
>  #define CTRL_MBUF_FLAG       (1ULL << 63) /**< Mbuf contains control data */
>  
> +/**
> + * Bit Mask to indicate what bits required for building TX context
I don't understand this first line - is it accidentally included?

> + * Get the name of a RX offload flag
> + *
> + * @param mask
> + *   The mask describing the flag. Usually only one bit must be set.
> + *   Several bits can be given if they belong to the same mask.
> + *   Ex: PKT_TX_L4_MASK.
TX mask given as an example for a function for RX flags is confusing.

> + * @return
> + *   The name of this flag, or NULL if it's not a valid RX flag.
> + */
> +static inline const char *rte_get_rx_ol_flag_name(uint64_t mask)
> +{
> +	switch (mask) {
> +	case PKT_RX_VLAN_PKT: return "PKT_RX_VLAN_PKT";
> +	case PKT_RX_RSS_HASH: return "PKT_RX_RSS_HASH";
> +	case PKT_RX_FDIR: return "PKT_RX_FDIR";
> +	case PKT_RX_L4_CKSUM_BAD: return "PKT_RX_L4_CKSUM_BAD";
> +	case PKT_RX_IP_CKSUM_BAD: return "PKT_RX_IP_CKSUM_BAD";
> +	/* case PKT_RX_EIP_CKSUM_BAD: return "PKT_RX_EIP_CKSUM_BAD"; */
> +	/* case PKT_RX_OVERSIZE: return "PKT_RX_OVERSIZE"; */
> +	/* case PKT_RX_HBUF_OVERFLOW: return "PKT_RX_HBUF_OVERFLOW"; */
> +	/* case PKT_RX_RECIP_ERR: return "PKT_RX_RECIP_ERR"; */
> +	/* case PKT_RX_MAC_ERR: return "PKT_RX_MAC_ERR"; */
> +	case PKT_RX_IPV4_HDR: return "PKT_RX_IPV4_HDR";
> +	case PKT_RX_IPV4_HDR_EXT: return "PKT_RX_IPV4_HDR_EXT";
> +	case PKT_RX_IPV6_HDR: return "PKT_RX_IPV6_HDR";
> +	case PKT_RX_IPV6_HDR_EXT: return "PKT_RX_IPV6_HDR_EXT";
> +	case PKT_RX_IEEE1588_PTP: return "PKT_RX_IEEE1588_PTP";
> +	case PKT_RX_IEEE1588_TMST: return "PKT_RX_IEEE1588_TMST";
> +	case PKT_RX_TUNNEL_IPV4_HDR: return "PKT_RX_TUNNEL_IPV4_HDR";
> +	case PKT_RX_TUNNEL_IPV6_HDR: return "PKT_RX_TUNNEL_IPV6_HDR";
> +	default: return NULL;
> +	}
> +}
> +
> +/**
> + * Get the name of a TX offload flag
> + *
> + * @param mask
> + *   The mask describing the flag. Usually only one bit must be set.
> + *   Several bits can be given if they belong to the same mask.
> + *   Ex: PKT_TX_L4_MASK.
> + * @return
> + *   The name of this flag, or NULL if it's not a valid TX flag.
> + */
> +static inline const char *rte_get_tx_ol_flag_name(uint64_t mask)
> +{
> +	switch (mask) {
> +	case PKT_TX_VLAN_PKT: return "PKT_TX_VLAN_PKT";
> +	case PKT_TX_IP_CKSUM: return "PKT_TX_IP_CKSUM";
> +	case PKT_TX_TCP_CKSUM: return "PKT_TX_TCP_CKSUM";
> +	case PKT_TX_SCTP_CKSUM: return "PKT_TX_SCTP_CKSUM";
> +	case PKT_TX_UDP_CKSUM: return "PKT_TX_UDP_CKSUM";
> +	case PKT_TX_IEEE1588_TMST: return "PKT_TX_IEEE1588_TMST";
> +	case PKT_TX_VXLAN_CKSUM: return "PKT_TX_VXLAN_CKSUM";
> +	default: return NULL;
> +	}
> +}
> +
>  /* define a set of marker types that can be used to refer to set points in the
>   * mbuf */
>  typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
> -- 
> 2.1.0
>