From: Bruce Richardson <bruce.richardson@intel.com>
To: Sujith Sankar <ssujith@cisco.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v2] enicpmd: replace the type u_int* with uint* to remove compilation errors on a few platforms
Date: Fri, 28 Nov 2014 15:52:29 +0000 [thread overview]
Message-ID: <20141128155229.GB4556@bricha3-MOBL3> (raw)
In-Reply-To: <1417167499-4847-1-git-send-email-ssujith@cisco.com>
On Fri, Nov 28, 2014 at 03:08:19PM +0530, Sujith Sankar wrote:
> ENIC PMD was giving compilation errors on ppc_64-power8-linuxapp-gcc because
> of types such as u_int32_t. This patch replaces all those with uint32_t and
> similar ones.
>
> Reported-by: David Marchand <david.marchand@6wind.com>
> Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch helps out with getting a clang compile on BSD. However, one error
and a number of warnings remain that should be looked at in another patch.
The error is:
dpdk.org/lib/librte_pmd_enic/enic_main.c:435:3: fatal error: non-void function 'enic_rq_indicate_buf' should return a value [-Wreturn-type]
return;
> ---
> lib/librte_pmd_enic/enic.h | 2 +-
> lib/librte_pmd_enic/enic_compat.h | 24 ++++++++++++------------
> lib/librte_pmd_enic/enic_main.c | 18 +++++++++---------
> lib/librte_pmd_enic/vnic/vnic_devcmd.h | 6 +++---
> 4 files changed, 25 insertions(+), 25 deletions(-)
>
> diff --git a/lib/librte_pmd_enic/enic.h b/lib/librte_pmd_enic/enic.h
> index 9f80fc0..6400d24 100644
> --- a/lib/librte_pmd_enic/enic.h
> +++ b/lib/librte_pmd_enic/enic.h
> @@ -106,7 +106,7 @@ struct enic {
> int iommu_group_fd;
> int iommu_groupid;
> int eventfd;
> - u_int8_t mac_addr[ETH_ALEN];
> + uint8_t mac_addr[ETH_ALEN];
> pthread_t err_intr_thread;
> int promisc;
> int allmulti;
> diff --git a/lib/librte_pmd_enic/enic_compat.h b/lib/librte_pmd_enic/enic_compat.h
> index d22578e..b3738ee 100644
> --- a/lib/librte_pmd_enic/enic_compat.h
> +++ b/lib/librte_pmd_enic/enic_compat.h
> @@ -89,34 +89,34 @@ typedef unsigned int u32;
> typedef unsigned long long u64;
> typedef unsigned long long dma_addr_t;
>
> -static inline u_int32_t ioread32(volatile void *addr)
> +static inline uint32_t ioread32(volatile void *addr)
> {
> - return *(volatile u_int32_t *)addr;
> + return *(volatile uint32_t *)addr;
> }
>
> -static inline u16 ioread16(volatile void *addr)
> +static inline uint16_t ioread16(volatile void *addr)
> {
> - return *(volatile u16 *)addr;
> + return *(volatile uint16_t *)addr;
> }
>
> -static inline u_int8_t ioread8(volatile void *addr)
> +static inline uint8_t ioread8(volatile void *addr)
> {
> - return *(volatile u_int8_t *)addr;
> + return *(volatile uint8_t *)addr;
> }
>
> -static inline void iowrite32(u_int32_t val, volatile void *addr)
> +static inline void iowrite32(uint32_t val, volatile void *addr)
> {
> - *(volatile u_int32_t *)addr = val;
> + *(volatile uint32_t *)addr = val;
> }
>
> -static inline void iowrite16(u16 val, volatile void *addr)
> +static inline void iowrite16(uint16_t val, volatile void *addr)
> {
> - *(volatile u16 *)addr = val;
> + *(volatile uint16_t *)addr = val;
> }
>
> -static inline void iowrite8(u_int8_t val, volatile void *addr)
> +static inline void iowrite8(uint8_t val, volatile void *addr)
> {
> - *(volatile u_int8_t *)addr = val;
> + *(volatile uint8_t *)addr = val;
> }
>
> static inline unsigned int readl(volatile void __iomem *addr)
> diff --git a/lib/librte_pmd_enic/enic_main.c b/lib/librte_pmd_enic/enic_main.c
> index f6f00d3..853dd04 100644
> --- a/lib/librte_pmd_enic/enic_main.c
> +++ b/lib/librte_pmd_enic/enic_main.c
> @@ -172,17 +172,17 @@ unsigned int enic_cleanup_wq(struct enic *enic, struct vnic_wq *wq)
>
> int enic_send_pkt(struct enic *enic, struct vnic_wq *wq,
> struct rte_mbuf *tx_pkt, unsigned short len,
> - u_int8_t sop, u_int8_t eop,
> - u_int16_t ol_flags, u_int16_t vlan_tag)
> + uint8_t sop, uint8_t eop,
> + uint16_t ol_flags, uint16_t vlan_tag)
> {
> struct wq_enet_desc *desc = vnic_wq_next_desc(wq);
> - u_int16_t mss = 0;
> - u_int16_t header_length = 0;
> - u_int8_t cq_entry = eop;
> - u_int8_t vlan_tag_insert = 0;
> + uint16_t mss = 0;
> + uint16_t header_length = 0;
> + uint8_t cq_entry = eop;
> + uint8_t vlan_tag_insert = 0;
> unsigned char *buf = (unsigned char *)(tx_pkt->buf_addr) +
> RTE_PKTMBUF_HEADROOM;
> - u_int64_t bus_addr = (dma_addr_t)
> + uint64_t bus_addr = (dma_addr_t)
> (tx_pkt->buf_physaddr + RTE_PKTMBUF_HEADROOM);
>
> if (sop) {
> @@ -342,8 +342,8 @@ static int enic_rq_alloc_buf(struct vnic_rq *rq)
> void *buf;
> dma_addr_t dma_addr;
> struct rq_enet_desc *desc = vnic_rq_next_desc(rq);
> - u_int8_t type = RQ_ENET_TYPE_ONLY_SOP;
> - u_int16_t len = ENIC_MAX_MTU + VLAN_ETH_HLEN;
> + uint8_t type = RQ_ENET_TYPE_ONLY_SOP;
> + uint16_t len = ENIC_MAX_MTU + VLAN_ETH_HLEN;
> u16 split_hdr_size = vnic_get_hdr_split_size(enic->vdev);
> struct rte_mbuf *mbuf = enic_rxmbuf_alloc(rq->mp);
> struct rte_mbuf *hdr_mbuf = NULL;
> diff --git a/lib/librte_pmd_enic/vnic/vnic_devcmd.h b/lib/librte_pmd_enic/vnic/vnic_devcmd.h
> index b4c87c1..e7ecf31 100644
> --- a/lib/librte_pmd_enic/vnic/vnic_devcmd.h
> +++ b/lib/librte_pmd_enic/vnic/vnic_devcmd.h
> @@ -691,9 +691,9 @@ enum {
> #define FILTER_MAX_BUF_SIZE 100 /* Maximum size of buffer to CMD_ADD_FILTER */
>
> struct filter_tlv {
> - u_int32_t type;
> - u_int32_t length;
> - u_int32_t val[0];
> + uint32_t type;
> + uint32_t length;
> + uint32_t val[0];
> };
>
> enum {
> --
> 1.9.1
>
next prev parent reply other threads:[~2014-11-28 15:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-28 9:38 Sujith Sankar
2014-11-28 10:17 ` Thomas Monjalon
2014-11-28 10:21 ` Sujith Sankar (ssujith)
2014-11-28 10:28 ` Thomas Monjalon
2014-11-28 13:48 ` Bruce Richardson
2014-11-28 15:50 ` David Marchand
2014-11-28 15:52 ` Bruce Richardson [this message]
2014-11-28 16:00 ` Thomas Monjalon
2014-11-28 16:01 ` Sujith Sankar (ssujith)
2014-11-28 16:06 ` Bruce Richardson
2014-11-28 16:16 ` Sujith Sankar (ssujith)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141128155229.GB4556@bricha3-MOBL3 \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ssujith@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).