From: Neil Horman <nhorman@tuxdriver.com>
To: Zhou Danny <danny.zhou@intel.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v3 4/5] eal: add per rx queue interrupt handling based on VFIO
Date: Tue, 17 Feb 2015 10:58:52 -0500 [thread overview]
Message-ID: <20150217155852.GD6309@neilslaptop.think-freely.org> (raw)
In-Reply-To: <1424180839-24483-5-git-send-email-danny.zhou@intel.com>
On Tue, Feb 17, 2015 at 09:47:18PM +0800, Zhou Danny wrote:
> v3 changes:
> - Fix review comments
>
> v2 changes:
> - Fix compilation issue for a missed header file
> - Bug fix: free unreleased resources on the exception path before return
> - Consolidate coding style related review comments
>
> This patch does below:
> - Create multiple VFIO eventfd for rx queues.
> - Handle per rx queue interrupt.
> - Eliminate unnecessary suspended DPDK polling thread wakeup mechanism
> for rx interrupt by allowing polling thread epoll_wait rx queue
> interrupt notification.
>
> Signed-off-by: Danny Zhou <danny.zhou@intel.com>
> Tested-by: Yong Liu <yong.liu@intel.com>
> ---
> lib/librte_eal/common/include/rte_eal.h | 12 ++
> lib/librte_eal/linuxapp/eal/Makefile | 1 +
> lib/librte_eal/linuxapp/eal/eal_interrupts.c | 190 ++++++++++++++++-----
> lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 12 +-
> .../linuxapp/eal/include/exec-env/rte_interrupts.h | 4 +
> 5 files changed, 175 insertions(+), 44 deletions(-)
>
> diff --git a/lib/librte_eal/common/include/rte_eal.h b/lib/librte_eal/common/include/rte_eal.h
> index f4ecd2e..d81331f 100644
> --- a/lib/librte_eal/common/include/rte_eal.h
> +++ b/lib/librte_eal/common/include/rte_eal.h
> @@ -150,6 +150,18 @@ int rte_eal_iopl_init(void);
> * - On failure, a negative error value.
> */
> int rte_eal_init(int argc, char **argv);
> +
> +/**
> + * @param port_id
> + * the port id
> + * @param queue_id
> + * the queue id
> + * @return
> + * - On success, return 0
> + * - On failure, returns -1.
> + */
> +int rte_eal_wait_rx_intr(uint8_t port_id, uint8_t queue_id);
> +
> /**
> * Usage function typedef used by the application usage function.
> *
> diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile
> index e117cec..c593dfa 100644
> --- a/lib/librte_eal/linuxapp/eal/Makefile
> +++ b/lib/librte_eal/linuxapp/eal/Makefile
> @@ -43,6 +43,7 @@ CFLAGS += -I$(SRCDIR)/include
> CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common
> CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
> CFLAGS += -I$(RTE_SDK)/lib/librte_ring
> +CFLAGS += -I$(RTE_SDK)/lib/librte_mbuf
> CFLAGS += -I$(RTE_SDK)/lib/librte_mempool
> CFLAGS += -I$(RTE_SDK)/lib/librte_malloc
> CFLAGS += -I$(RTE_SDK)/lib/librte_ether
> diff --git a/lib/librte_eal/linuxapp/eal/eal_interrupts.c b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
> index dc2668a..97215ad 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_interrupts.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
> @@ -64,6 +64,7 @@
> #include <rte_malloc.h>
> #include <rte_errno.h>
> #include <rte_spinlock.h>
> +#include <rte_ethdev.h>
>
> #include "eal_private.h"
> #include "eal_vfio.h"
> @@ -127,6 +128,9 @@ static pthread_t intr_thread;
> #ifdef VFIO_PRESENT
>
> #define IRQ_SET_BUF_LEN (sizeof(struct vfio_irq_set) + sizeof(int))
> +/* irq set buffer length for queue interrupts and LSC interrupt */
> +#define MSIX_IRQ_SET_BUF_LEN (sizeof(struct vfio_irq_set) + \
> + sizeof(int) * (VFIO_MAX_QUEUE_ID + 1))
>
> /* enable legacy (INTx) interrupts */
> static int
> @@ -218,10 +222,10 @@ vfio_disable_intx(struct rte_intr_handle *intr_handle) {
> return 0;
> }
>
> -/* enable MSI-X interrupts */
> +/* enable MSI interrupts */
> static int
> vfio_enable_msi(struct rte_intr_handle *intr_handle) {
> - int len, ret;
> + int len, ret, max_intr;
> char irq_set_buf[IRQ_SET_BUF_LEN];
> struct vfio_irq_set *irq_set;
> int *fd_ptr;
> @@ -230,12 +234,19 @@ vfio_enable_msi(struct rte_intr_handle *intr_handle) {
>
> irq_set = (struct vfio_irq_set *) irq_set_buf;
> irq_set->argsz = len;
> - irq_set->count = 1;
> + if ((!intr_handle->max_intr) ||
> + (intr_handle->max_intr > VFIO_MAX_QUEUE_ID))
> + max_intr = VFIO_MAX_QUEUE_ID + 1;
> + else
> + max_intr = intr_handle->max_intr;
> +
> + irq_set->count = max_intr;
> irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
> irq_set->index = VFIO_PCI_MSI_IRQ_INDEX;
> irq_set->start = 0;
> fd_ptr = (int *) &irq_set->data;
> - *fd_ptr = intr_handle->fd;
> + memcpy(fd_ptr, intr_handle->queue_fd, sizeof(intr_handle->queue_fd));
> + fd_ptr[max_intr - 1] = intr_handle->fd;
>
> ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
>
> @@ -244,27 +255,10 @@ vfio_enable_msi(struct rte_intr_handle *intr_handle) {
> intr_handle->fd);
> return -1;
> }
> -
> - /* manually trigger interrupt to enable it */
> - memset(irq_set, 0, len);
> - len = sizeof(struct vfio_irq_set);
> - irq_set->argsz = len;
> - irq_set->count = 1;
> - irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
> - irq_set->index = VFIO_PCI_MSI_IRQ_INDEX;
> - irq_set->start = 0;
> -
> - ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
> -
> - if (ret) {
> - RTE_LOG(ERR, EAL, "Error triggering MSI interrupts for fd %d\n",
> - intr_handle->fd);
> - return -1;
> - }
> return 0;
> }
>
> -/* disable MSI-X interrupts */
> +/* disable MSI interrupts */
> static int
> vfio_disable_msi(struct rte_intr_handle *intr_handle) {
> struct vfio_irq_set *irq_set;
> @@ -292,8 +286,8 @@ vfio_disable_msi(struct rte_intr_handle *intr_handle) {
> /* enable MSI-X interrupts */
> static int
> vfio_enable_msix(struct rte_intr_handle *intr_handle) {
> - int len, ret;
> - char irq_set_buf[IRQ_SET_BUF_LEN];
> + int len, ret, max_intr;
> + char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
> struct vfio_irq_set *irq_set;
> int *fd_ptr;
>
> @@ -301,12 +295,19 @@ vfio_enable_msix(struct rte_intr_handle *intr_handle) {
>
> irq_set = (struct vfio_irq_set *) irq_set_buf;
> irq_set->argsz = len;
> - irq_set->count = 1;
> + if ((!intr_handle->max_intr) ||
> + (intr_handle->max_intr > VFIO_MAX_QUEUE_ID))
> + max_intr = VFIO_MAX_QUEUE_ID + 1;
> + else
> + max_intr = intr_handle->max_intr;
> +
> + irq_set->count = max_intr;
> irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
> irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
> irq_set->start = 0;
> fd_ptr = (int *) &irq_set->data;
> - *fd_ptr = intr_handle->fd;
> + memcpy(fd_ptr, intr_handle->queue_fd, sizeof(intr_handle->queue_fd));
> + fd_ptr[max_intr - 1] = intr_handle->fd;
>
> ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
>
> @@ -316,22 +317,6 @@ vfio_enable_msix(struct rte_intr_handle *intr_handle) {
> return -1;
> }
>
> - /* manually trigger interrupt to enable it */
> - memset(irq_set, 0, len);
> - len = sizeof(struct vfio_irq_set);
> - irq_set->argsz = len;
> - irq_set->count = 1;
> - irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
> - irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
> - irq_set->start = 0;
> -
> - ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
> -
> - if (ret) {
> - RTE_LOG(ERR, EAL, "Error triggering MSI-X interrupts for fd %d\n",
> - intr_handle->fd);
> - return -1;
> - }
> return 0;
> }
>
> @@ -339,7 +324,7 @@ vfio_enable_msix(struct rte_intr_handle *intr_handle) {
> static int
> vfio_disable_msix(struct rte_intr_handle *intr_handle) {
> struct vfio_irq_set *irq_set;
> - char irq_set_buf[IRQ_SET_BUF_LEN];
> + char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
> int len, ret;
>
> len = sizeof(struct vfio_irq_set);
> @@ -824,3 +809,122 @@ rte_eal_intr_init(void)
> return -ret;
> }
>
> +static void
> +eal_intr_process_rx_interrupts(uint8_t port_id,
> + struct epoll_event *events, int nfds)
> +{
> + int n, bytes_read;
> + union rte_intr_read_buffer buf;
> + struct rte_intr_handle intr_handle =
> + rte_eth_devices[port_id].pci_dev->intr_handle;
> +
> + for (n = 0; n < nfds; n++) {
> + /* set the length to be read for different handle type */
> + switch (intr_handle.type) {
> + case RTE_INTR_HANDLE_UIO:
> + bytes_read = sizeof(buf.uio_intr_count);
> + break;
> + case RTE_INTR_HANDLE_ALARM:
> + bytes_read = sizeof(buf.timerfd_num);
> + break;
> +#ifdef VFIO_PRESENT
> + case RTE_INTR_HANDLE_VFIO_MSIX:
> + case RTE_INTR_HANDLE_VFIO_MSI:
> + case RTE_INTR_HANDLE_VFIO_LEGACY:
> + bytes_read = sizeof(buf.vfio_intr_count);
> + break;
> +#endif
> + default:
> + bytes_read = 1;
> + break;
> + }
> +
> + /**
> + * read out to clear the ready-to-be-read flag
> + * for epoll_wait.
> + */
> + bytes_read = read(events[n].data.fd, &buf, bytes_read);
> + if (bytes_read < 0)
> + RTE_LOG(ERR, EAL, "Error reading from file "
> + "descriptor %d: %s\n", events[n].data.fd,
> + strerror(errno));
> + else if (bytes_read == 0)
> + RTE_LOG(ERR, EAL, "Read nothing from file "
> + "descriptor %d\n", events[n].data.fd);
> + }
> +}
> +
> +static void
> +eal_intr_handle_rx_interrupts(uint8_t port_id, int pfd, unsigned totalfds)
> +{
> + struct epoll_event events[totalfds];
> + int nfds = 0;
> +
> + do {
> + nfds = epoll_wait(pfd, events, totalfds,
> + EAL_INTR_EPOLL_WAIT_FOREVER);
> + /* epoll_wait fail */
> + if (nfds < 0) {
> + RTE_LOG(ERR, EAL,
> + "epoll_wait returns with fail\n");
> + return;
> + }
> + } while (nfds == 0);
> +
> + /* epoll_wait has at least one fd ready to read */
> + eal_intr_process_rx_interrupts(port_id, events, nfds);
> +}
> +
> +int
> +rte_eal_wait_rx_intr(uint8_t port_id, uint8_t queue_id)
> +{
> + struct rte_intr_handle intr_handle =
> + rte_eth_devices[port_id].pci_dev->intr_handle;
> + struct epoll_event ev;
> + unsigned numfds = 0;
> +
> + /* create epoll fd */
> + int pfd = epoll_create(1);
> + if (pfd < 0) {
> + RTE_LOG(ERR, EAL, "Cannot create epoll instance\n");
> + return -1;
> + }
> +
> + rte_spinlock_lock(&intr_lock);
> +
> + ev.events = EPOLLIN | EPOLLPRI;
> + switch (intr_handle.type) {
> + case RTE_INTR_HANDLE_UIO:
> + ev.data.fd = intr_handle.fd;
> + break;
> +#ifdef VFIO_PRESENT
> + case RTE_INTR_HANDLE_VFIO_MSIX:
> + case RTE_INTR_HANDLE_VFIO_MSI:
> + case RTE_INTR_HANDLE_VFIO_LEGACY:
> + ev.data.fd = intr_handle.queue_fd[queue_id];
> + break;
> +#endif
> + default:
> + rte_spinlock_unlock(&intr_lock);
> + close(pfd);
> + return -1;
> + }
> +
> + if (epoll_ctl(pfd, EPOLL_CTL_ADD, ev.data.fd, &ev) < 0) {
> + RTE_LOG(ERR, EAL, "Error adding fd %d epoll_ctl, %s\n",
> + intr_handle.queue_fd[queue_id], strerror(errno));
> + } else
> + numfds++;
> +
> + rte_spinlock_unlock(&intr_lock);
> + /* serve the interrupt */
> + eal_intr_handle_rx_interrupts(port_id, pfd, numfds);
> +
> + /**
> + * when we return, we need to rebuild the
> + * list of fds to monitor.
> + */
> + close(pfd);
> +
> + return 0;
> +}
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> index 20e0977..0e5fa76 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
> @@ -283,11 +283,21 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
>
> dev->intr_handle.fd = fd;
> dev->intr_handle.vfio_dev_fd = vfio_dev_fd;
> -
> switch (i) {
> case VFIO_PCI_MSIX_IRQ_INDEX:
> internal_config.vfio_intr_mode = RTE_INTR_MODE_MSIX;
> dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSIX;
> + for (i = 0; i < VFIO_MAX_QUEUE_ID; i++) {
> + fd = eventfd(0, 0);
> + if (fd < 0) {
> + RTE_LOG(ERR, EAL,
> + "cannot setup eventfd,"
> + "error %i (%s)\n",
> + errno, strerror(errno));
> + return -1;
> + }
> + dev->intr_handle.queue_fd[i] = fd;
> + }
> break;
> case VFIO_PCI_MSI_IRQ_INDEX:
> internal_config.vfio_intr_mode = RTE_INTR_MODE_MSI;
> diff --git a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h
> index 23eafd9..c6982cf 100644
> --- a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h
> +++ b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h
> @@ -38,6 +38,8 @@
> #ifndef _RTE_LINUXAPP_INTERRUPTS_H_
> #define _RTE_LINUXAPP_INTERRUPTS_H_
>
> +#define VFIO_MAX_QUEUE_ID 32
> +
> enum rte_intr_handle_type {
> RTE_INTR_HANDLE_UNKNOWN = 0,
> RTE_INTR_HANDLE_UIO, /**< uio device handle */
> @@ -52,6 +54,8 @@ enum rte_intr_handle_type {
> struct rte_intr_handle {
> int vfio_dev_fd; /**< VFIO device file descriptor */
> int fd; /**< file descriptor */
> + int max_intr; /**< max interrupt requested */
> + int queue_fd[VFIO_MAX_QUEUE_ID]; /**< rx and tx queue interrupt file descriptor */
This is used outside of this library, you need to move these new fields to the
end of the structure.
neil
> enum rte_intr_handle_type type; /**< handle type */
> };
>
> --
> 1.8.1.4
>
>
next prev parent reply other threads:[~2015-02-17 15:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 13:47 [dpdk-dev] [PATCH v3 0/5] Interrupt mode PMD Zhou Danny
2015-02-17 13:47 ` [dpdk-dev] [PATCH v3 1/5] ethdev: add rx interrupt enable/disable functions Zhou Danny
2015-02-17 15:52 ` Neil Horman
2015-02-19 8:06 ` Zhou, Danny
2015-02-19 8:21 ` Gonzalez Monroy, Sergio
2015-02-19 8:34 ` Zhou, Danny
2015-02-19 13:09 ` Neil Horman
2015-02-19 13:15 ` Zhou, Danny
2015-02-17 15:54 ` Neil Horman
2015-02-19 7:58 ` Zhou, Danny
2015-02-19 13:02 ` Neil Horman
2015-02-17 13:47 ` [dpdk-dev] [PATCH v3 2/5] ixgbe: enable rx queue interrupts for both PF and VF Zhou Danny
2015-02-17 13:47 ` [dpdk-dev] [PATCH v3 3/5] igb: enable rx queue interrupts for PF Zhou Danny
2015-02-17 13:47 ` [dpdk-dev] [PATCH v3 4/5] eal: add per rx queue interrupt handling based on VFIO Zhou Danny
2015-02-17 15:58 ` Neil Horman [this message]
2015-02-19 8:10 ` Zhou, Danny
2015-02-19 13:04 ` Neil Horman
2015-02-17 13:47 ` [dpdk-dev] [PATCH v3 5/5] l3fwd-power: enable one-shot rx interrupt and polling/interrupt mode switch Zhou Danny
2015-02-18 1:51 ` [dpdk-dev] [PATCH v3 0/5] Interrupt mode PMD Liang, Cunming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150217155852.GD6309@neilslaptop.think-freely.org \
--to=nhorman@tuxdriver.com \
--cc=danny.zhou@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).