From: Stephen Hemminger <stephen@networkplumber.org>
To: Vlad Zolotarov <vladz@cloudius-systems.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v1 5/5] ixgbe: Add LRO support
Date: Tue, 3 Mar 2015 16:36:38 -0800 [thread overview]
Message-ID: <20150303163638.118d630e@urahara> (raw)
In-Reply-To: <1425412123-5227-6-git-send-email-vladz@cloudius-systems.com>
On Tue, 3 Mar 2015 21:48:43 +0200
Vlad Zolotarov <vladz@cloudius-systems.com> wrote:
> - Only x540 and 82599 devices support LRO.
> - Add the appropriate HW configuration.
> - Add RSC aware rx_pkt_burst() handlers:
> - Implemented bulk allocation and non-bulk allocation versions.
> - Add LRO-specific fields to rte_eth_rxmode, to rte_eth_dev_data
> and to igb_rx_queue.
> - Use the appropriate handler when LRO is requested.
>
> Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Checkpatch warnings (edited to remove ones that should be ok)
WARNING: 'recieved' may be misspelled - perhaps 'received'?
#196: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1426:
+ * @rx_pkts table of recieved packets
WARNING: Missing a blank line after declarations
#223: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1453:
+ struct igb_rx_queue *rxq = rx_queue;
+ volatile union ixgbe_adv_rx_desc *rx_ring = rxq->rx_ring;
WARNING: labels should not be indented
#246: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1476:
+ next_desc:
WARNING: quoted string split across lines
#285: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1515:
+ PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_id=%u "
+ "staterr=0x%x data_len=%u",
WARNING: quoted string split across lines
#293: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1523:
+ PMD_RX_LOG(DEBUG, "RX mbuf alloc failed "
+ "port_id=%u queue_id=%u",
WARNING: Missing a blank line after declarations
#302: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1532:
+ uint16_t next_rdt = rxq->rx_free_trigger;
+ if (!ixgbe_rx_alloc_bufs(rxq, false)) {
WARNING: quoted string split across lines
#309: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1539:
+ PMD_RX_LOG(DEBUG, "RX bulk alloc failed "
+ "port_id=%u queue_id=%u",
ERROR: code indent should use tabs where possible
#350: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1580:
+ rxm->data_off = RTE_PKTMBUF_HEADROOM;$
WARNING: please, no spaces at the start of a line
#350: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1580:
+ rxm->data_off = RTE_PKTMBUF_HEADROOM;$
WARNING: quoted string split across lines
#452: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1682:
+ PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_tail=%u "
+ "nb_hold=%u nb_rx=%u",
WARNING: quoted string split across lines
#536: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2580:
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p sw_rsc_ring=%p hw_ring=%p "
+ "dma_addr=0x%"PRIx64,
WARNING: Possible switch case/default not preceeded by break or fallthrough comment
#617: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:3926:
+ default:
WARNING: quoted string split across lines
#648: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:3966:
+ PMD_INIT_LOG(CRIT, "LRO is requested on HW that doesn't "
+ "support it");
WARNING: quoted string split across lines
#693: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4022:
+ PMD_INIT_LOG(CRIT, "LRO can't be enabled when HW CRC "
+ "is disabled");
WARNING: quoted string split across lines
#711: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4084:
+ PMD_INIT_LOG(INFO, "split_hdr_size less than "
+ "128 bytes (%d)!",
WARNING: quoted string split across lines
#835: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4267:
+ PMD_INIT_LOG(INFO, "LRO is requested. Using a bulk "
+ "allocation version");
WARNING: quoted string split across lines
#840: FILE: lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4272:
+ PMD_INIT_LOG(INFO, "LRO is requested. Using a single "
+ "allocation version");
next prev parent reply other threads:[~2015-03-04 0:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 19:48 [dpdk-dev] [PATCH v1 0/5]: Add LRO support to ixgbe PMD Vlad Zolotarov
2015-03-03 19:48 ` [dpdk-dev] [PATCH v1 1/5] ixgbe: Cleanups Vlad Zolotarov
2015-03-03 19:48 ` [dpdk-dev] [PATCH v1 2/5] ixgbe: Bug fix: Properly configure Rx CRC stripping for x540 devices Vlad Zolotarov
2015-03-03 19:48 ` [dpdk-dev] [PATCH v1 3/5] ixgbe: Code refactoring Vlad Zolotarov
2015-03-03 19:48 ` [dpdk-dev] [PATCH v1 4/5] common_linuxapp: Added CONFIG_RTE_ETHDEV_LRO_SUPPORT option Vlad Zolotarov
2015-03-03 19:48 ` [dpdk-dev] [PATCH v1 5/5] ixgbe: Add LRO support Vlad Zolotarov
2015-03-04 0:33 ` Stephen Hemminger
2015-03-04 7:24 ` Vlad Zolotarov
2015-03-04 0:33 ` Stephen Hemminger
2015-03-04 7:57 ` Vlad Zolotarov
2015-03-04 18:54 ` Stephen Hemminger
2015-03-05 9:36 ` Vlad Zolotarov
2015-03-04 8:05 ` Avi Kivity
2015-03-04 0:34 ` Stephen Hemminger
2015-03-04 7:57 ` Vlad Zolotarov
2015-03-04 0:36 ` Stephen Hemminger [this message]
2015-03-04 7:59 ` Vlad Zolotarov
2015-03-04 18:51 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150303163638.118d630e@urahara \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=vladz@cloudius-systems.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).