Re: [dpdk-dev] [PATCH] enicpmd: build changes for FreeBSD

[Bruce Richardson <bruce.richardson@intel.com>]

On Wed, May 06, 2015 at 02:41:00PM +0530, Sujith Sankar wrote:
> This patch adds the changes required to build enic for FreeBSD
> 

Hi,

I see no issues with this patch, but I suggest the description for it should
be changed. There is no actual build problem or error with the enic (at least
not that I can see), it builds fine with gcc and clang currently. This patch
instead adds support for the enic to the nic_uio driver so the enic can be
"used", not just "built" on FreeBSD. Correct?

Other than that description reworking:

Acked-by: Bruce Richardson <bruce.richardson@intel.com>

> Signed-off-by: Sujith Sankar <ssujith@cisco.com>
> ---
>  lib/librte_eal/bsdapp/nic_uio/nic_uio.c         |  1 +
>  lib/librte_eal/common/include/rte_pci_dev_ids.h | 17 +++++++++++++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/lib/librte_eal/bsdapp/nic_uio/nic_uio.c b/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
> index 5ae8560..e649e32 100644
> --- a/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
> +++ b/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
> @@ -113,6 +113,7 @@ struct pci_bdf {
>  #define RTE_PCI_DEV_ID_DECL_I40EVF(vend, dev)  {vend, dev},
>  #define RTE_PCI_DEV_ID_DECL_VIRTIO(vend, dev)  {vend, dev},
>  #define RTE_PCI_DEV_ID_DECL_VMXNET3(vend, dev) {vend, dev},
> +#define RTE_PCI_DEV_ID_DECL_ENIC(vend, dev)    {vend, dev},
>  
>  const struct device devices[] = {
>  #include <rte_pci_dev_ids.h>
> diff --git a/lib/librte_eal/common/include/rte_pci_dev_ids.h b/lib/librte_eal/common/include/rte_pci_dev_ids.h
> index 21d2eed..5d1b285 100644
> --- a/lib/librte_eal/common/include/rte_pci_dev_ids.h
> +++ b/lib/librte_eal/common/include/rte_pci_dev_ids.h
> @@ -140,6 +140,10 @@
>  #define RTE_PCI_DEV_ID_DECL_FM10KVF(vend, dev)
>  #endif
>  
> +#ifndef RTE_PCI_DEV_ID_DECL_ENIC
> +#define RTE_PCI_DEV_ID_DECL_ENIC(vend, dev)
> +#endif
> +
>  #ifndef PCI_VENDOR_ID_INTEL
>  /** Vendor ID used by Intel devices */
>  #define PCI_VENDOR_ID_INTEL 0x8086
> @@ -155,6 +159,11 @@
>  #define PCI_VENDOR_ID_VMWARE 0x15AD
>  #endif
>  
> +#ifndef PCI_VENDOR_ID_CISCO
> +/** Vendor ID used by Cisco VIC devices */
> +#define PCI_VENDOR_ID_CISCO 0x1137
> +#endif
> +
>  /******************** Physical EM devices from e1000_hw.h ********************/
>  
>  #define E1000_DEV_ID_82542                    0x1000
> @@ -548,6 +557,14 @@ RTE_PCI_DEV_ID_DECL_VMXNET3(PCI_VENDOR_ID_VMWARE, VMWARE_DEV_ID_VMXNET3)
>  
>  RTE_PCI_DEV_ID_DECL_FM10KVF(PCI_VENDOR_ID_INTEL, FM10K_DEV_ID_VF)
>  
> +/****************** Cisco VIC devices ******************/
> +
> +#define PCI_DEVICE_ID_CISCO_VIC_ENET         0x0043  /* ethernet vnic */
> +#define PCI_DEVICE_ID_CISCO_VIC_ENET_VF      0x0071  /* enet SRIOV VF */
> +
> +RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET)
> +RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET_VF)
> +
>  /*
>   * Undef all RTE_PCI_DEV_ID_DECL_* here.
>   */
> -- 
> 1.9.1
>