From: Bruce Richardson <bruce.richardson@intel.com>
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH 1/5] ixgbe: remove unnecessary casts
Date: Mon, 18 May 2015 10:24:32 +0100 [thread overview]
Message-ID: <20150518092432.GA1636@bricha3-MOBL3> (raw)
In-Reply-To: <1431709707-5281-2-git-send-email-stephen@networkplumber.org>
On Fri, May 15, 2015 at 10:08:23AM -0700, Stephen Hemminger wrote:
> Don't do unnecessary casts when logging messages. Better to use
> the correct printf format code.
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
+1
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
> ---
> lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 25 ++++++++++++-------------
> 1 file changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> index 5f9a1cf..a585151 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> @@ -568,8 +568,8 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
> (hw->mac.type != ixgbe_mac_X550EM_x))
> return -ENOSYS;
>
> - PMD_INIT_LOG(INFO, "Setting port %d, %s queue_id %d to stat index %d",
> - (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
> + PMD_INIT_LOG(INFO, "Setting port %u, %s queue_id %d to stat index %d",
> + eth_dev->data->port_id, is_rx ? "RX" : "TX",
> queue_id, stat_idx);
>
> n = (uint8_t)(queue_id / NB_QMAP_FIELDS_PER_QSM_REG);
> @@ -594,8 +594,8 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
> else
> stat_mappings->rqsmr[n] |= qsmr_mask;
>
> - PMD_INIT_LOG(INFO, "Set port %d, %s queue_id %d to stat index %d",
> - (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
> + PMD_INIT_LOG(INFO, "Set port %u, %s queue_id %d to stat index %d",
> + eth_dev->data->port_id, is_rx ? "RX" : "TX",
> queue_id, stat_idx);
> PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
> is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]);
> @@ -889,11 +889,11 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
>
> if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
> PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d, SFP+: %d",
> - (int) hw->mac.type, (int) hw->phy.type,
> - (int) hw->phy.sfp_type);
> + hw->mac.type, hw->phy.type,
> + hw->phy.sfp_type);
> else
> PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d",
> - (int) hw->mac.type, (int) hw->phy.type);
> + hw->mac.type, hw->phy.type);
>
> PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
> eth_dev->data->port_id, pci_dev->id.vendor_id,
> @@ -2307,14 +2307,13 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
> memset(&link, 0, sizeof(link));
> rte_ixgbe_dev_atomic_read_link_status(dev, &link);
> if (link.link_status) {
> - PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
> - (int)(dev->data->port_id),
> - (unsigned)link.link_speed,
> - link.link_duplex == ETH_LINK_FULL_DUPLEX ?
> + PMD_INIT_LOG(INFO, "Port %u: Link Up - speed %u Mbps - %s",
> + dev->data->port_id, link.link_speed,
> + link.link_duplex == ETH_LINK_FULL_DUPLEX ?
> "full-duplex" : "half-duplex");
> } else {
> - PMD_INIT_LOG(INFO, " Port %d: Link Down",
> - (int)(dev->data->port_id));
> + PMD_INIT_LOG(INFO, "Port %u: Link Down",
> + dev->data->port_id);
> }
> PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
> dev->pci_dev->addr.domain,
> --
> 2.1.4
>
next prev parent reply other threads:[~2015-05-18 9:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 17:08 [dpdk-dev] [PATCH v2 0/5] ixgbe: logging patches Stephen Hemminger
2015-05-15 17:08 ` [dpdk-dev] [PATCH 1/5] ixgbe: remove unnecessary casts Stephen Hemminger
2015-05-18 9:24 ` Bruce Richardson [this message]
2015-05-15 17:08 ` [dpdk-dev] [PATCH 2/5] ixgbe: don't print PCI address on link change Stephen Hemminger
2015-05-18 9:32 ` Bruce Richardson
2015-05-15 17:08 ` [dpdk-dev] [PATCH 3/5] ixgbe: raise priority of significant events Stephen Hemminger
2015-05-18 9:27 ` Bruce Richardson
2015-05-15 17:08 ` [dpdk-dev] [PATCH 4/5] ixgbe: use RTE_LOG not rte_log Stephen Hemminger
2015-05-18 9:28 ` Bruce Richardson
2015-05-15 17:08 ` [dpdk-dev] [PATCH 5/5] ixgbe: silence noisy log messages Stephen Hemminger
2015-05-18 9:32 ` Bruce Richardson
2015-05-18 16:39 ` Stephen Hemminger
2015-05-19 7:46 ` David Marchand
2015-05-19 14:40 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150518092432.GA1636@bricha3-MOBL3 \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).