[dpdk-dev] [PATCH v5 resend 00/12] vhost-user multiple queues enabling

[dpdk-dev] [PATCH v5 resend 00/12] vhost-user multiple queues enabling

[Yuanhan Liu]

This patch set enables vhost-user multiple queues.

Overview
========

It depends on some QEMU patches that, hopefully, will be merged soon.
Those qemu patches introduce some new vhost-user messages, for vhost-user
mq enabling negotiation. Here is the main negotiation steps (Qemu
as master, and DPDK vhost-user as slave):

- Master queries features by VHOST_USER_GET_FEATURES from slave

- Check if VHOST_USER_F_PROTOCOL_FEATURES exist. If not, mq is not
  supported. (check patch 1 for why VHOST_USER_F_PROTOCOL_FEATURES
  is introduced)

- Master then sends another command, VHOST_USER_GET_QUEUE_NUM, for
  querying how many queues the slave supports.

  Master will compare the result with the requested queue number.
  Qemu exits if the former is smaller.

- Master then tries to initiate all queue pairs by sending some vhost
  user commands, including VHOST_USER_SET_VRING_CALL, which will
  trigger the slave to do related vring setup, such as vring allocation.


Till now, all necessary initiation and negotiation are done. And master
could send another message, VHOST_USER_SET_VRING_ENABLE, to enable/disable
a specific queue dynamically later.


Patchset
========

Patch 1-7 are all prepare works for enabling mq; they are all atomic
changes, which is designed to not break anything.

Patch 8 acutally enables mq feature, by setting two key feature flags.

Patch 9-12 are for demostrating the mq feature.


Testing
=======

Host side
----------

- # Start vhost-switch

  sudo mount -t hugetlbfs nodev /mnt/huge
  sudo modprobe uio
  sudo insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko

  sudo $RTE_SDK/tools/dpdk_nic_bind.py --bind igb_uio 0000:08:00.0

  sudo $RTE_SDK/examples/vhost/build/vhost-switch -c 0xf0 -n 4     \
       --huge-dir /mnt/huge --socket-mem 2048,0 -- -p 1 --vm2vm 0  \
       --dev-basename usvhost --rxq 2

  # Above common generates a usvhost socket file at PWD. You could also
  # specify "--stats 1" option to enable stats dumping.



- # start qemu


  sudo sudo mount -t hugetlbfs nodev $HOME/hugetlbfs
  $QEMU_DIR/x86_64-softmmu/qemu-system-x86_64 -machine accel=kvm -m 4G \
        -object memory-backend-file,id=mem,size=4G,mem-path=$HOME/hugetlbfs,share=on \
	-numa node,memdev=mem -chardev socket,id=chr0,path=/path/to/usvhost \
	-netdev vhost-user,id=net0,chardev=chr0,vhostforce,queues=2     \
	-device virtio-net-pci,netdev=net0,mq=on,vectors=6,mac=52:54:00:12:34:58,csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off \
	-hda $HOME/iso/fc-22-x86_64.img -smp 10 -cpu core2duo,+sse3,+sse4.1,+sse4.2


Guest side
----------

   modprobe uio
   insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
   echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
   ./tools/dpdk_nic_bind.py --bind igb_uio 00:03.0
    
   $RTE_SDK/$RTE_TARGET/app/testpmd -c 1f -n 4 -- --rxq=2 --txq=2 \
        --nb-cores=4 -i --disable-hw-vlan --txqflags 0xf00
 
   > set fwd mac
   > start tx_first
 

After those setups, you then could use packet generator for packet tx/rx testing.

---
Changchun Ouyang (7):
  vhost: rxtx: prepare work for multiple queue support
  vhost: add VHOST_USER_SET_VRING_ENABLE message
  virtio: resolve for control queue
  vhost: add API bind a virtq to a specific core
  ixgbe: support VMDq RSS in non-SRIOV environment
  examples/vhost: demonstrate the usage of vhost mq feature
  examples/vhost: add per queue stats

Yuanhan Liu (5):
  vhost-user: add protocol features support
  vhost-user: add VHOST_USER_GET_QUEUE_NUM message
  vhost: vring queue setup for multiple queue support
  vhost-user: handle VHOST_USER_RESET_OWNER correctly
  vhost-user: enable vhost-user multiple queue

 drivers/net/ixgbe/ixgbe_rxtx.c                |  86 +++++-
 drivers/net/virtio/virtio_ethdev.c            |  12 +-
 examples/vhost/main.c                         | 420 +++++++++++++++++---------
 examples/vhost/main.h                         |   3 +-
 lib/librte_ether/rte_ethdev.c                 |  11 +
 lib/librte_vhost/rte_vhost_version.map        |   7 +
 lib/librte_vhost/rte_virtio_net.h             |  30 +-
 lib/librte_vhost/vhost_rxtx.c                 |  56 +++-
 lib/librte_vhost/vhost_user/vhost-net-user.c  |  27 +-
 lib/librte_vhost/vhost_user/vhost-net-user.h  |   4 +
 lib/librte_vhost/vhost_user/virtio-net-user.c |  79 +++--
 lib/librte_vhost/vhost_user/virtio-net-user.h |  10 +
 lib/librte_vhost/virtio-net.c                 | 158 +++++++---
 13 files changed, 659 insertions(+), 244 deletions(-)

-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 01/12] vhost-user: add protocol features support

[Yuanhan Liu]

The two protocol features messages are introduced by qemu vhost
maintainer(Michael) for extendting vhost-user interface. Here is
an excerpta from the vhost-user spec:

    Any protocol extensions are gated by protocol feature bits,
    which allows full backwards compatibility on both master
    and slave.

The vhost-user multiple queue features will be treated as a vhost-user
extension, hence, we have to implement the two messages first.

VHOST_USER_PROTOCOL_FEATURES is initated to 0, as we don't support
any yet.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/rte_virtio_net.h             |  1 +
 lib/librte_vhost/vhost_user/vhost-net-user.c  | 13 ++++++++++++-
 lib/librte_vhost/vhost_user/vhost-net-user.h  |  2 ++
 lib/librte_vhost/vhost_user/virtio-net-user.c | 13 +++++++++++++
 lib/librte_vhost/vhost_user/virtio-net-user.h |  5 +++++
 lib/librte_vhost/virtio-net.c                 |  5 ++++-
 6 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
index a037c15..e3a21e5 100644
--- a/lib/librte_vhost/rte_virtio_net.h
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -99,6 +99,7 @@ struct virtio_net {
 	struct vhost_virtqueue	*virtqueue[VIRTIO_QNUM];	/**< Contains all virtqueue information. */
 	struct virtio_memory	*mem;		/**< QEMU memory and memory region information. */
 	uint64_t		features;	/**< Negotiated feature set. */
+	uint64_t		protocol_features;	/**< Negotiated protocol feature set. */
 	uint64_t		device_fh;	/**< device identifier. */
 	uint32_t		flags;		/**< Device flags. Only used to check if device is running on data core. */
 #define IF_NAME_SZ (PATH_MAX > IFNAMSIZ ? PATH_MAX : IFNAMSIZ)
diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.c b/lib/librte_vhost/vhost_user/vhost-net-user.c
index d1f8877..bc2ad24 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.c
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.c
@@ -95,7 +95,9 @@ static const char *vhost_message_str[VHOST_USER_MAX] = {
 	[VHOST_USER_GET_VRING_BASE] = "VHOST_USER_GET_VRING_BASE",
 	[VHOST_USER_SET_VRING_KICK] = "VHOST_USER_SET_VRING_KICK",
 	[VHOST_USER_SET_VRING_CALL] = "VHOST_USER_SET_VRING_CALL",
-	[VHOST_USER_SET_VRING_ERR]  = "VHOST_USER_SET_VRING_ERR"
+	[VHOST_USER_SET_VRING_ERR]  = "VHOST_USER_SET_VRING_ERR",
+	[VHOST_USER_GET_PROTOCOL_FEATURES]  = "VHOST_USER_GET_PROTOCOL_FEATURES",
+	[VHOST_USER_SET_PROTOCOL_FEATURES]  = "VHOST_USER_SET_PROTOCOL_FEATURES",
 };
 
 /**
@@ -363,6 +365,15 @@ vserver_message_handler(int connfd, void *dat, int *remove)
 		ops->set_features(ctx, &features);
 		break;
 
+	case VHOST_USER_GET_PROTOCOL_FEATURES:
+		msg.payload.u64 = VHOST_USER_PROTOCOL_FEATURES;
+		msg.size = sizeof(msg.payload.u64);
+		send_vhost_message(connfd, &msg);
+		break;
+	case VHOST_USER_SET_PROTOCOL_FEATURES:
+		user_set_protocol_features(ctx, msg.payload.u64);
+		break;
+
 	case VHOST_USER_SET_OWNER:
 		ops->set_owner(ctx);
 		break;
diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.h b/lib/librte_vhost/vhost_user/vhost-net-user.h
index 2e72f3c..4490d23 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.h
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.h
@@ -63,6 +63,8 @@ typedef enum VhostUserRequest {
 	VHOST_USER_SET_VRING_KICK = 12,
 	VHOST_USER_SET_VRING_CALL = 13,
 	VHOST_USER_SET_VRING_ERR = 14,
+	VHOST_USER_GET_PROTOCOL_FEATURES = 15,
+	VHOST_USER_SET_PROTOCOL_FEATURES = 16,
 	VHOST_USER_MAX
 } VhostUserRequest;
 
diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
index 4689927..360254e 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.c
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
@@ -316,3 +316,16 @@ user_destroy_device(struct vhost_device_ctx ctx)
 		dev->mem = NULL;
 	}
 }
+
+void
+user_set_protocol_features(struct vhost_device_ctx ctx,
+			   uint64_t protocol_features)
+{
+	struct virtio_net *dev;
+
+	dev = get_device(ctx);
+	if (dev == NULL || protocol_features & ~VHOST_USER_PROTOCOL_FEATURES)
+		return;
+
+	dev->protocol_features = protocol_features;
+}
diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.h b/lib/librte_vhost/vhost_user/virtio-net-user.h
index df24860..e7a6ff4 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.h
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.h
@@ -37,12 +37,17 @@
 #include "vhost-net.h"
 #include "vhost-net-user.h"
 
+#define VHOST_USER_PROTOCOL_FEATURES	0ULL
+
 int user_set_mem_table(struct vhost_device_ctx, struct VhostUserMsg *);
 
 void user_set_vring_call(struct vhost_device_ctx, struct VhostUserMsg *);
 
 void user_set_vring_kick(struct vhost_device_ctx, struct VhostUserMsg *);
 
+void user_set_protocol_features(struct vhost_device_ctx ctx,
+				uint64_t protocol_features);
+
 int user_get_vring_base(struct vhost_device_ctx, struct vhost_vring_state *);
 
 void user_destroy_device(struct vhost_device_ctx);
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
index d0f1764..deac6b9 100644
--- a/lib/librte_vhost/virtio-net.c
+++ b/lib/librte_vhost/virtio-net.c
@@ -67,11 +67,14 @@ struct virtio_net_device_ops const *notify_ops;
 /* root address of the linked list of managed virtio devices */
 static struct virtio_net_config_ll *ll_root;
 
+#define VHOST_USER_F_PROTOCOL_FEATURES	30
+
 /* Features supported by this lib. */
 #define VHOST_SUPPORTED_FEATURES ((1ULL << VIRTIO_NET_F_MRG_RXBUF) | \
 				(1ULL << VIRTIO_NET_F_CTRL_VQ) | \
 				(1ULL << VIRTIO_NET_F_CTRL_RX) | \
-				(1ULL << VHOST_F_LOG_ALL))
+				(1ULL << VHOST_F_LOG_ALL)      | \
+				(1ULL << VHOST_USER_F_PROTOCOL_FEATURES))
 static uint64_t VHOST_FEATURES = VHOST_SUPPORTED_FEATURES;
 
 
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 02/12] vhost-user: add VHOST_USER_GET_QUEUE_NUM message

[Yuanhan Liu]

To tell the frontend (qemu) how many queue pairs we support.

And it is initiated to VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/vhost_user/vhost-net-user.c | 7 +++++++
 lib/librte_vhost/vhost_user/vhost-net-user.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.c b/lib/librte_vhost/vhost_user/vhost-net-user.c
index bc2ad24..8675cd4 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.c
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.c
@@ -98,6 +98,7 @@ static const char *vhost_message_str[VHOST_USER_MAX] = {
 	[VHOST_USER_SET_VRING_ERR]  = "VHOST_USER_SET_VRING_ERR",
 	[VHOST_USER_GET_PROTOCOL_FEATURES]  = "VHOST_USER_GET_PROTOCOL_FEATURES",
 	[VHOST_USER_SET_PROTOCOL_FEATURES]  = "VHOST_USER_SET_PROTOCOL_FEATURES",
+	[VHOST_USER_GET_QUEUE_NUM]  = "VHOST_USER_GET_QUEUE_NUM",
 };
 
 /**
@@ -421,6 +422,12 @@ vserver_message_handler(int connfd, void *dat, int *remove)
 		RTE_LOG(INFO, VHOST_CONFIG, "not implemented\n");
 		break;
 
+	case VHOST_USER_GET_QUEUE_NUM:
+		msg.payload.u64 = VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX;
+		msg.size = sizeof(msg.payload.u64);
+		send_vhost_message(connfd, &msg);
+		break;
+
 	default:
 		break;
 
diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.h b/lib/librte_vhost/vhost_user/vhost-net-user.h
index 4490d23..389d21d 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.h
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.h
@@ -65,6 +65,7 @@ typedef enum VhostUserRequest {
 	VHOST_USER_SET_VRING_ERR = 14,
 	VHOST_USER_GET_PROTOCOL_FEATURES = 15,
 	VHOST_USER_SET_PROTOCOL_FEATURES = 16,
+	VHOST_USER_GET_QUEUE_NUM = 17,
 	VHOST_USER_MAX
 } VhostUserRequest;
 
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Yuanhan Liu]

All queue pairs, including the default (the first) queue pair,
are allocated dynamically, when a vring_call message is received
first time for a specific queue pair.

This is a refactor work for enabling vhost-user multiple queue;
it should not break anything as it does no functional changes:
we don't support mq set, so there is only one mq at max.

This patch is based on Changchun's patch.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/rte_virtio_net.h             |   3 +-
 lib/librte_vhost/vhost_user/virtio-net-user.c |  44 +++++-----
 lib/librte_vhost/virtio-net.c                 | 121 ++++++++++++++++----------
 3 files changed, 102 insertions(+), 66 deletions(-)

diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
index e3a21e5..5dd6493 100644
--- a/lib/librte_vhost/rte_virtio_net.h
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -96,7 +96,7 @@ struct vhost_virtqueue {
  * Device structure contains all configuration information relating to the device.
  */
 struct virtio_net {
-	struct vhost_virtqueue	*virtqueue[VIRTIO_QNUM];	/**< Contains all virtqueue information. */
+	struct vhost_virtqueue	*virtqueue[VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX];	/**< Contains all virtqueue information. */
 	struct virtio_memory	*mem;		/**< QEMU memory and memory region information. */
 	uint64_t		features;	/**< Negotiated feature set. */
 	uint64_t		protocol_features;	/**< Negotiated protocol feature set. */
@@ -104,6 +104,7 @@ struct virtio_net {
 	uint32_t		flags;		/**< Device flags. Only used to check if device is running on data core. */
 #define IF_NAME_SZ (PATH_MAX > IFNAMSIZ ? PATH_MAX : IFNAMSIZ)
 	char			ifname[IF_NAME_SZ];	/**< Name of the tap device or socket path. */
+	uint32_t		virt_qp_nb;	/**< number of queue pair we have allocated */
 	void			*priv;		/**< private context */
 } __rte_cache_aligned;
 
diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
index 360254e..e83d279 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.c
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
@@ -206,25 +206,33 @@ err_mmap:
 }
 
 static int
+vq_is_ready(struct vhost_virtqueue *vq)
+{
+	return vq && vq->desc   &&
+	       vq->kickfd != -1 &&
+	       vq->callfd != -1;
+}
+
+static int
 virtio_is_ready(struct virtio_net *dev)
 {
 	struct vhost_virtqueue *rvq, *tvq;
+	uint32_t i;
 
-	/* mq support in future.*/
-	rvq = dev->virtqueue[VIRTIO_RXQ];
-	tvq = dev->virtqueue[VIRTIO_TXQ];
-	if (rvq && tvq && rvq->desc && tvq->desc &&
-		(rvq->kickfd != -1) &&
-		(rvq->callfd != -1) &&
-		(tvq->kickfd != -1) &&
-		(tvq->callfd != -1)) {
-		RTE_LOG(INFO, VHOST_CONFIG,
-			"virtio is now ready for processing.\n");
-		return 1;
+	for (i = 0; i < dev->virt_qp_nb; i++) {
+		rvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ];
+		tvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ];
+
+		if (!vq_is_ready(rvq) || !vq_is_ready(tvq)) {
+			RTE_LOG(INFO, VHOST_CONFIG,
+				"virtio is not ready for processing.\n");
+			return 0;
+		}
 	}
+
 	RTE_LOG(INFO, VHOST_CONFIG,
-		"virtio isn't ready for processing.\n");
-	return 0;
+		"virtio is now ready for processing.\n");
+	return 1;
 }
 
 void
@@ -290,13 +298,9 @@ user_get_vring_base(struct vhost_device_ctx ctx,
 	 * sent and only sent in vhost_vring_stop.
 	 * TODO: cleanup the vring, it isn't usable since here.
 	 */
-	if ((dev->virtqueue[VIRTIO_RXQ]->kickfd) >= 0) {
-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
-		dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
-	}
-	if ((dev->virtqueue[VIRTIO_TXQ]->kickfd) >= 0) {
-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
-		dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
+	if ((dev->virtqueue[state->index]->kickfd) >= 0) {
+		close(dev->virtqueue[state->index]->kickfd);
+		dev->virtqueue[state->index]->kickfd = -1;
 	}
 
 	return 0;
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
index deac6b9..643a92e 100644
--- a/lib/librte_vhost/virtio-net.c
+++ b/lib/librte_vhost/virtio-net.c
@@ -36,6 +36,7 @@
 #include <stddef.h>
 #include <stdint.h>
 #include <stdlib.h>
+#include <assert.h>
 #include <sys/mman.h>
 #include <unistd.h>
 #ifdef RTE_LIBRTE_VHOST_NUMA
@@ -178,6 +179,15 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
 
 }
 
+static void
+cleanup_vq(struct vhost_virtqueue *vq)
+{
+	if (vq->callfd >= 0)
+		close(vq->callfd);
+	if (vq->kickfd >= 0)
+		close(vq->kickfd);
+}
+
 /*
  * Unmap any memory, close any file descriptors and
  * free any memory owned by a device.
@@ -185,6 +195,8 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
 static void
 cleanup_device(struct virtio_net *dev)
 {
+	uint32_t i;
+
 	/* Unmap QEMU memory file if mapped. */
 	if (dev->mem) {
 		munmap((void *)(uintptr_t)dev->mem->mapped_address,
@@ -192,15 +204,10 @@ cleanup_device(struct virtio_net *dev)
 		free(dev->mem);
 	}
 
-	/* Close any event notifiers opened by device. */
-	if (dev->virtqueue[VIRTIO_RXQ]->callfd >= 0)
-		close(dev->virtqueue[VIRTIO_RXQ]->callfd);
-	if (dev->virtqueue[VIRTIO_RXQ]->kickfd >= 0)
-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
-	if (dev->virtqueue[VIRTIO_TXQ]->callfd >= 0)
-		close(dev->virtqueue[VIRTIO_TXQ]->callfd);
-	if (dev->virtqueue[VIRTIO_TXQ]->kickfd >= 0)
-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
+	for (i = 0; i < dev->virt_qp_nb; i++) {
+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ]);
+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ]);
+	}
 }
 
 /*
@@ -209,9 +216,11 @@ cleanup_device(struct virtio_net *dev)
 static void
 free_device(struct virtio_net_config_ll *ll_dev)
 {
-	/* Free any malloc'd memory */
-	rte_free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
-	rte_free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
+	uint32_t i;
+
+	for (i = 0; i < ll_dev->dev.virt_qp_nb; i++)
+		rte_free(ll_dev->dev.virtqueue[i * VIRTIO_QNUM]);
+
 	rte_free(ll_dev);
 }
 
@@ -244,6 +253,50 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
 	}
 }
 
+static void
+init_vring_queue(struct vhost_virtqueue *vq)
+{
+	memset(vq, 0, sizeof(struct vhost_virtqueue));
+
+	vq->kickfd = -1;
+	vq->callfd = -1;
+
+	/* Backends are set to -1 indicating an inactive device. */
+	vq->backend = -1;
+}
+
+static void
+init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
+{
+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
+}
+
+static int
+alloc_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
+{
+	struct vhost_virtqueue *virtqueue = NULL;
+	uint32_t virt_rx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_RXQ;
+	uint32_t virt_tx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_TXQ;
+
+	virtqueue = rte_malloc(NULL,
+			       sizeof(struct vhost_virtqueue) * VIRTIO_QNUM, 0);
+	if (virtqueue == NULL) {
+		RTE_LOG(ERR, VHOST_CONFIG,
+			"Failed to allocate memory for virt qp:%d.\n", qp_idx);
+		return -1;
+	}
+
+	dev->virtqueue[virt_rx_q_idx] = virtqueue;
+	dev->virtqueue[virt_tx_q_idx] = virtqueue + VIRTIO_TXQ;
+
+	init_vring_queue_pair(dev, qp_idx);
+
+	dev->virt_qp_nb += 1;
+
+	return 0;
+}
+
 /*
  *  Initialise all variables in device structure.
  */
@@ -251,6 +304,7 @@ static void
 init_device(struct virtio_net *dev)
 {
 	uint64_t vq_offset;
+	uint32_t i;
 
 	/*
 	 * Virtqueues have already been malloced so
@@ -261,17 +315,9 @@ init_device(struct virtio_net *dev)
 	/* Set everything to 0. */
 	memset((void *)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
 		(sizeof(struct virtio_net) - (size_t)vq_offset));
-	memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
-	memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
 
-	dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
-	dev->virtqueue[VIRTIO_RXQ]->callfd = -1;
-	dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
-	dev->virtqueue[VIRTIO_TXQ]->callfd = -1;
-
-	/* Backends are set to -1 indicating an inactive device. */
-	dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
-	dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
+	for (i = 0; i < dev->virt_qp_nb; i++)
+		init_vring_queue_pair(dev, i);
 }
 
 /*
@@ -283,7 +329,6 @@ static int
 new_device(struct vhost_device_ctx ctx)
 {
 	struct virtio_net_config_ll *new_ll_dev;
-	struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
 
 	/* Setup device and virtqueues. */
 	new_ll_dev = rte_malloc(NULL, sizeof(struct virtio_net_config_ll), 0);
@@ -294,28 +339,6 @@ new_device(struct vhost_device_ctx ctx)
 		return -1;
 	}
 
-	virtqueue_rx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
-	if (virtqueue_rx == NULL) {
-		rte_free(new_ll_dev);
-		RTE_LOG(ERR, VHOST_CONFIG,
-			"(%"PRIu64") Failed to allocate memory for rxq.\n",
-			ctx.fh);
-		return -1;
-	}
-
-	virtqueue_tx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
-	if (virtqueue_tx == NULL) {
-		rte_free(virtqueue_rx);
-		rte_free(new_ll_dev);
-		RTE_LOG(ERR, VHOST_CONFIG,
-			"(%"PRIu64") Failed to allocate memory for txq.\n",
-			ctx.fh);
-		return -1;
-	}
-
-	new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
-	new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
-
 	/* Initialise device and virtqueues. */
 	init_device(&new_ll_dev->dev);
 
@@ -680,13 +703,21 @@ set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
 {
 	struct virtio_net *dev;
 	struct vhost_virtqueue *vq;
+	uint32_t cur_qp_idx = file->index / VIRTIO_QNUM;
 
 	dev = get_device(ctx);
 	if (dev == NULL)
 		return -1;
 
+	/* alloc vring queue pair if it is a new queue pair */
+	if (cur_qp_idx + 1 > dev->virt_qp_nb) {
+		if (alloc_vring_queue_pair(dev, cur_qp_idx) < 0)
+			return -1;
+	}
+
 	/* file->index refers to the queue index. The txq is 1, rxq is 0. */
 	vq = dev->virtqueue[file->index];
+	assert(vq != NULL);
 
 	if (vq->callfd >= 0)
 		close(vq->callfd);
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 04/12] vhost: rxtx: prepare work for multiple queue support

[Yuanhan Liu]

From: Changchun Ouyang <changchun.ouyang@intel.com>

Do not use VIRTIO_RXQ or VIRTIO_TXQ anymore; use the queue_id,
instead, which will be set to a proper value for a specific queue
when we have multiple queue support enabled.

For now, queue_id is still set with VIRTIO_RXQ or VIRTIO_TXQ,
so it should not break anything.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/vhost_rxtx.c | 46 ++++++++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 14 deletions(-)

diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
index b2b2bcc..a4ab6ca 100644
--- a/lib/librte_vhost/vhost_rxtx.c
+++ b/lib/librte_vhost/vhost_rxtx.c
@@ -42,6 +42,16 @@
 
 #define MAX_PKT_BURST 32
 
+static inline int __attribute__((always_inline))
+is_valid_virt_queue_idx(uint32_t virtq_idx, int is_tx, uint32_t max_qp_idx)
+{
+	if ((is_tx ^ (virtq_idx & 0x1)) ||
+	    (virtq_idx >= max_qp_idx * VIRTIO_QNUM))
+		return 0;
+
+	return 1;
+}
+
 /**
  * This function adds buffers to the virtio devices RX virtqueue. Buffers can
  * be received from the physical port or from another virtio device. A packet
@@ -68,12 +78,14 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
 	uint8_t success = 0;
 
 	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
-	if (unlikely(queue_id != VIRTIO_RXQ)) {
-		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
+	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
+		RTE_LOG(ERR, VHOST_DATA,
+			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
+			__func__, dev->device_fh, queue_id);
 		return 0;
 	}
 
-	vq = dev->virtqueue[VIRTIO_RXQ];
+	vq = dev->virtqueue[queue_id];
 	count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
 
 	/*
@@ -235,8 +247,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
 }
 
 static inline uint32_t __attribute__((always_inline))
-copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
-	uint16_t res_end_idx, struct rte_mbuf *pkt)
+copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
+			uint16_t res_base_idx, uint16_t res_end_idx,
+			struct rte_mbuf *pkt)
 {
 	uint32_t vec_idx = 0;
 	uint32_t entry_success = 0;
@@ -264,7 +277,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
 	 * Convert from gpa to vva
 	 * (guest physical addr -> vhost virtual addr)
 	 */
-	vq = dev->virtqueue[VIRTIO_RXQ];
+	vq = dev->virtqueue[queue_id];
 	vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
 	vb_hdr_addr = vb_addr;
 
@@ -464,11 +477,14 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
 
 	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
 		dev->device_fh);
-	if (unlikely(queue_id != VIRTIO_RXQ)) {
-		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
+	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
+		RTE_LOG(ERR, VHOST_DATA,
+			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
+			__func__, dev->device_fh, queue_id);
+		return 0;
 	}
 
-	vq = dev->virtqueue[VIRTIO_RXQ];
+	vq = dev->virtqueue[queue_id];
 	count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
 
 	if (count == 0)
@@ -509,8 +525,8 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
 							res_cur_idx);
 		} while (success == 0);
 
-		entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
-			res_cur_idx, pkts[pkt_idx]);
+		entry_success = copy_from_mbuf_to_vring(dev, queue_id,
+			res_base_idx, res_cur_idx, pkts[pkt_idx]);
 
 		rte_compiler_barrier();
 
@@ -559,12 +575,14 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
 	uint16_t free_entries, entry_success = 0;
 	uint16_t avail_idx;
 
-	if (unlikely(queue_id != VIRTIO_TXQ)) {
-		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
+	if (unlikely(!is_valid_virt_queue_idx(queue_id, 1, dev->virt_qp_nb))) {
+		RTE_LOG(ERR, VHOST_DATA,
+			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
+			__func__, dev->device_fh, queue_id);
 		return 0;
 	}
 
-	vq = dev->virtqueue[VIRTIO_TXQ];
+	vq = dev->virtqueue[queue_id];
 	avail_idx =  *((volatile uint16_t *)&vq->avail->idx);
 
 	/* If there are no available buffers then return. */
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message

[Yuanhan Liu]

From: Changchun Ouyang <changchun.ouyang@intel.com>

This message is used to enable/disable a specific vring queue pair.
The first queue pair is enabled by default.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/rte_virtio_net.h             |  1 +
 lib/librte_vhost/vhost_rxtx.c                 | 10 ++++++++++
 lib/librte_vhost/vhost_user/vhost-net-user.c  |  5 +++++
 lib/librte_vhost/vhost_user/vhost-net-user.h  |  1 +
 lib/librte_vhost/vhost_user/virtio-net-user.c | 22 ++++++++++++++++++++++
 lib/librte_vhost/vhost_user/virtio-net-user.h |  3 +++
 lib/librte_vhost/virtio-net.c                 | 12 +++++++++---
 7 files changed, 51 insertions(+), 3 deletions(-)

diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
index 5dd6493..08b69df 100644
--- a/lib/librte_vhost/rte_virtio_net.h
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -89,6 +89,7 @@ struct vhost_virtqueue {
 	volatile uint16_t	last_used_idx_res;	/**< Used for multiple devices reserving buffers. */
 	int			callfd;			/**< Used to notify the guest (trigger interrupt). */
 	int			kickfd;			/**< Currently unused as polling mode is enabled. */
+	int			enabled;
 	struct buf_vector	buf_vec[BUF_VECTOR_MAX];	/**< for scatter RX. */
 } __rte_cache_aligned;
 
diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
index a4ab6ca..aa9ccda 100644
--- a/lib/librte_vhost/vhost_rxtx.c
+++ b/lib/librte_vhost/vhost_rxtx.c
@@ -86,6 +86,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
 	}
 
 	vq = dev->virtqueue[queue_id];
+	if (unlikely(vq->enabled == 0))
+		return 0;
+
 	count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
 
 	/*
@@ -278,6 +281,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
 	 * (guest physical addr -> vhost virtual addr)
 	 */
 	vq = dev->virtqueue[queue_id];
+
 	vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
 	vb_hdr_addr = vb_addr;
 
@@ -485,6 +489,9 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
 	}
 
 	vq = dev->virtqueue[queue_id];
+	if (unlikely(vq->enabled == 0))
+		return 0;
+
 	count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
 
 	if (count == 0)
@@ -583,6 +590,9 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
 	}
 
 	vq = dev->virtqueue[queue_id];
+	if (unlikely(vq->enabled == 0))
+		return 0;
+
 	avail_idx =  *((volatile uint16_t *)&vq->avail->idx);
 
 	/* If there are no available buffers then return. */
diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.c b/lib/librte_vhost/vhost_user/vhost-net-user.c
index 8675cd4..f681676 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.c
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.c
@@ -99,6 +99,7 @@ static const char *vhost_message_str[VHOST_USER_MAX] = {
 	[VHOST_USER_GET_PROTOCOL_FEATURES]  = "VHOST_USER_GET_PROTOCOL_FEATURES",
 	[VHOST_USER_SET_PROTOCOL_FEATURES]  = "VHOST_USER_SET_PROTOCOL_FEATURES",
 	[VHOST_USER_GET_QUEUE_NUM]  = "VHOST_USER_GET_QUEUE_NUM",
+	[VHOST_USER_SET_VRING_ENABLE]  = "VHOST_USER_SET_VRING_ENABLE",
 };
 
 /**
@@ -428,6 +429,10 @@ vserver_message_handler(int connfd, void *dat, int *remove)
 		send_vhost_message(connfd, &msg);
 		break;
 
+	case VHOST_USER_SET_VRING_ENABLE:
+		user_set_vring_enable(ctx, &msg.payload.state);
+		break;
+
 	default:
 		break;
 
diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.h b/lib/librte_vhost/vhost_user/vhost-net-user.h
index 389d21d..38637cc 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.h
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.h
@@ -66,6 +66,7 @@ typedef enum VhostUserRequest {
 	VHOST_USER_GET_PROTOCOL_FEATURES = 15,
 	VHOST_USER_SET_PROTOCOL_FEATURES = 16,
 	VHOST_USER_GET_QUEUE_NUM = 17,
+	VHOST_USER_SET_VRING_ENABLE = 18,
 	VHOST_USER_MAX
 } VhostUserRequest;
 
diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
index e83d279..9871f20 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.c
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
@@ -306,6 +306,28 @@ user_get_vring_base(struct vhost_device_ctx ctx,
 	return 0;
 }
 
+/*
+ * when virtio queues are ready to work, qemu will send us to
+ * enable the virtio queue pair.
+ */
+int
+user_set_vring_enable(struct vhost_device_ctx ctx,
+		      struct vhost_vring_state *state)
+{
+	struct virtio_net *dev = get_device(ctx);
+	uint32_t base_idx = state->index;
+	int enabled = (int)state->num;
+
+	RTE_LOG(INFO, VHOST_CONFIG,
+		"set queue enable: %d to qp idx: %d\n",
+		enabled, state->index);
+
+	dev->virtqueue[base_idx + VIRTIO_RXQ]->enabled = enabled;
+	dev->virtqueue[base_idx + VIRTIO_TXQ]->enabled = enabled;
+
+	return 0;
+}
+
 void
 user_destroy_device(struct vhost_device_ctx ctx)
 {
diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.h b/lib/librte_vhost/vhost_user/virtio-net-user.h
index e7a6ff4..d46057e 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.h
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.h
@@ -50,5 +50,8 @@ void user_set_protocol_features(struct vhost_device_ctx ctx,
 
 int user_get_vring_base(struct vhost_device_ctx, struct vhost_vring_state *);
 
+int user_set_vring_enable(struct vhost_device_ctx ctx,
+			  struct vhost_vring_state *state);
+
 void user_destroy_device(struct vhost_device_ctx);
 #endif
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
index 643a92e..5fe1ad6 100644
--- a/lib/librte_vhost/virtio-net.c
+++ b/lib/librte_vhost/virtio-net.c
@@ -254,7 +254,7 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
 }
 
 static void
-init_vring_queue(struct vhost_virtqueue *vq)
+init_vring_queue(struct vhost_virtqueue *vq, int qp_idx)
 {
 	memset(vq, 0, sizeof(struct vhost_virtqueue));
 
@@ -263,13 +263,19 @@ init_vring_queue(struct vhost_virtqueue *vq)
 
 	/* Backends are set to -1 indicating an inactive device. */
 	vq->backend = -1;
+
+	/* always set the default vq pair to enabled */
+	if (qp_idx == 0)
+		vq->enabled = 1;
 }
 
 static void
 init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
 {
-	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
-	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
+	uint32_t base_idx = qp_idx * VIRTIO_QNUM;
+
+	init_vring_queue(dev->virtqueue[base_idx + VIRTIO_RXQ], qp_idx);
+	init_vring_queue(dev->virtqueue[base_idx + VIRTIO_TXQ], qp_idx);
 }
 
 static int
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 06/12] vhost-user: handle VHOST_USER_RESET_OWNER correctly

[Yuanhan Liu]

Destroy corresponding device when a VHOST_USER_RESET_OWNER message is
received, otherwise, the vhost-switch would still try to access vq
of that device, which results to SIGSEG fault, and let vhost-switch
crash in the end.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/vhost_user/vhost-net-user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.c b/lib/librte_vhost/vhost_user/vhost-net-user.c
index f681676..8fad385 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.c
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.c
@@ -380,7 +380,7 @@ vserver_message_handler(int connfd, void *dat, int *remove)
 		ops->set_owner(ctx);
 		break;
 	case VHOST_USER_RESET_OWNER:
-		ops->reset_owner(ctx);
+		user_destroy_device(ctx);
 		break;
 
 	case VHOST_USER_SET_MEM_TABLE:
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Yuanhan Liu]

From: Changchun Ouyang <changchun.ouyang@intel.com>

Fix the max virtio queue pair read issue.

Control queue can't work for vhost-user mulitple queue mode,
so introduce a counter to void the dead loop when polling
the control queue.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 drivers/net/virtio/virtio_ethdev.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 465d3cd..b2f4120 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1162,7 +1162,6 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
 	struct virtio_hw *hw = eth_dev->data->dev_private;
 	struct virtio_net_config *config;
 	struct virtio_net_config local_config;
-	uint32_t offset_conf = sizeof(config->mac);
 	struct rte_pci_device *pci_dev;
 
 	RTE_BUILD_BUG_ON(RTE_PKTMBUF_HEADROOM < sizeof(struct virtio_net_hdr));
@@ -1222,7 +1221,9 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
 		config = &local_config;
 
 		if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) {
-			offset_conf += sizeof(config->status);
+			vtpci_read_dev_config(hw,
+				offsetof(struct virtio_net_config, status),
+				&config->status, sizeof(config->status));
 		} else {
 			PMD_INIT_LOG(DEBUG,
 				     "VIRTIO_NET_F_STATUS is not supported");
@@ -1230,15 +1231,16 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
 		}
 
 		if (vtpci_with_feature(hw, VIRTIO_NET_F_MQ)) {
-			offset_conf += sizeof(config->max_virtqueue_pairs);
+			vtpci_read_dev_config(hw,
+				offsetof(struct virtio_net_config, max_virtqueue_pairs),
+				&config->max_virtqueue_pairs,
+				sizeof(config->max_virtqueue_pairs));
 		} else {
 			PMD_INIT_LOG(DEBUG,
 				     "VIRTIO_NET_F_MQ is not supported");
 			config->max_virtqueue_pairs = 1;
 		}
 
-		vtpci_read_dev_config(hw, 0, (uint8_t *)config, offset_conf);
-
 		hw->max_rx_queues =
 			(VIRTIO_MAX_RX_QUEUES < config->max_virtqueue_pairs) ?
 			VIRTIO_MAX_RX_QUEUES : config->max_virtqueue_pairs;
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 08/12] vhost-user: enable vhost-user multiple queue

[Yuanhan Liu]

By setting VHOST_USER_PROTOCOL_F_MQ protocol feature bit, and
VIRTIO_NET_F_MQ feature bit.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/vhost_user/virtio-net-user.h | 4 +++-
 lib/librte_vhost/virtio-net.c                 | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.h b/lib/librte_vhost/vhost_user/virtio-net-user.h
index d46057e..b82108d 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.h
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.h
@@ -37,7 +37,9 @@
 #include "vhost-net.h"
 #include "vhost-net-user.h"
 
-#define VHOST_USER_PROTOCOL_FEATURES	0ULL
+#define VHOST_USER_PROTOCOL_F_MQ	0
+
+#define VHOST_USER_PROTOCOL_FEATURES	(1ULL << VHOST_USER_PROTOCOL_F_MQ)
 
 int user_set_mem_table(struct vhost_device_ctx, struct VhostUserMsg *);
 
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
index 5fe1ad6..49840b5 100644
--- a/lib/librte_vhost/virtio-net.c
+++ b/lib/librte_vhost/virtio-net.c
@@ -74,6 +74,7 @@ static struct virtio_net_config_ll *ll_root;
 #define VHOST_SUPPORTED_FEATURES ((1ULL << VIRTIO_NET_F_MRG_RXBUF) | \
 				(1ULL << VIRTIO_NET_F_CTRL_VQ) | \
 				(1ULL << VIRTIO_NET_F_CTRL_RX) | \
+				(1ULL << VIRTIO_NET_F_MQ)      | \
 				(1ULL << VHOST_F_LOG_ALL)      | \
 				(1ULL << VHOST_USER_F_PROTOCOL_FEATURES))
 static uint64_t VHOST_FEATURES = VHOST_SUPPORTED_FEATURES;
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 09/12] vhost: add API bind a virtq to a specific core

[Yuanhan Liu]

From: Changchun Ouyang <changchun.ouyang@intel.com>

The new API rte_vhost_core_id_set() is to bind a virtq to a specific
core, while the another API rte_vhost_core_id_get() is for getting
the bind core for a virtq.

The usage, which will be introduced soon, could be find at examles/vhost/main.c.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 lib/librte_vhost/rte_vhost_version.map |  7 +++++++
 lib/librte_vhost/rte_virtio_net.h      | 25 +++++++++++++++++++++++++
 lib/librte_vhost/virtio-net.c          | 25 +++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

diff --git a/lib/librte_vhost/rte_vhost_version.map b/lib/librte_vhost/rte_vhost_version.map
index 3d8709e..2ce141c 100644
--- a/lib/librte_vhost/rte_vhost_version.map
+++ b/lib/librte_vhost/rte_vhost_version.map
@@ -18,5 +18,12 @@ DPDK_2.1 {
 	global:
 
 	rte_vhost_driver_unregister;
+} DPDK_2.0;
+
+
+DPDK_2.2 {
+	global:
 
+	rte_vhost_core_id_get;
+	rte_vhost_core_id_set;
 } DPDK_2.0;
diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
index 08b69df..7785729 100644
--- a/lib/librte_vhost/rte_virtio_net.h
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -90,6 +90,7 @@ struct vhost_virtqueue {
 	int			callfd;			/**< Used to notify the guest (trigger interrupt). */
 	int			kickfd;			/**< Currently unused as polling mode is enabled. */
 	int			enabled;
+	uint32_t		core_id;		/**< Data core that the vq is attached to */
 	struct buf_vector	buf_vec[BUF_VECTOR_MAX];	/**< for scatter RX. */
 } __rte_cache_aligned;
 
@@ -238,4 +239,28 @@ uint16_t rte_vhost_enqueue_burst(struct virtio_net *dev, uint16_t queue_id,
 uint16_t rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
 	struct rte_mempool *mbuf_pool, struct rte_mbuf **pkts, uint16_t count);
 
+/**
+ * This function get the data core id for queue pair in one vhost device.
+ * @param dev
+ *  virtio-net device
+ * @param queue_id
+ *  virtio queue index in mq case
+ * @return
+ *  core id of queue pair of specified virtio device.
+ */
+uint16_t rte_vhost_core_id_get(volatile struct virtio_net *dev,
+			       uint16_t queue_id);
+
+/**
+ * This function set the data core id for queue pair in one vhost device.
+ * @param dev
+ *  virtio-net device
+ * @param queue_id
+ *  virtio queue index in mq case
+ * @param core_id
+ *  data core id for virtio queue pair in mq case
+ */
+void rte_vhost_core_id_set(struct virtio_net *dev, uint16_t queue_id,
+			   uint16_t core_id);
+
 #endif /* _VIRTIO_NET_H_ */
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
index 49840b5..33bdacd 100644
--- a/lib/librte_vhost/virtio-net.c
+++ b/lib/librte_vhost/virtio-net.c
@@ -867,6 +867,31 @@ int rte_vhost_feature_enable(uint64_t feature_mask)
 	return -1;
 }
 
+uint16_t
+rte_vhost_core_id_get(volatile struct virtio_net *dev, uint16_t queue_id)
+{
+	if (dev == NULL)
+		return 0;
+
+	if (dev->virtqueue == NULL || dev->virtqueue[queue_id] == NULL)
+		return 0;
+
+	return dev->virtqueue[queue_id]->core_id;
+}
+
+void
+rte_vhost_core_id_set(struct virtio_net *dev, uint16_t queue_id,
+		      uint16_t core_id)
+{
+	if (dev == NULL)
+		return;
+
+	if (dev->virtqueue == NULL || dev->virtqueue[queue_id] == NULL)
+		return;
+
+	dev->virtqueue[queue_id]->core_id = core_id;
+}
+
 /*
  * Register ops so that we can add/remove device to data core.
  */
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 10/12] ixgbe: support VMDq RSS in non-SRIOV environment

[Yuanhan Liu]

From: Changchun Ouyang <changchun.ouyang@intel.com>

In non-SRIOV environment, VMDq RSS could be enabled by MRQC register.
In theory, the queue number per pool could be 2 or 4, but only 2 queues
are available due to HW limitation, the same limit also exists in Linux
ixgbe driver.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 drivers/net/ixgbe/ixgbe_rxtx.c | 86 +++++++++++++++++++++++++++++++++++-------
 lib/librte_ether/rte_ethdev.c  | 11 ++++++
 2 files changed, 84 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index a598a72..e502fe8 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -3445,16 +3445,16 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev)
 	return;
 }
 
-/*
- * VMDq only support for 10 GbE NIC.
+/**
+ * Config pool for VMDq on 10 GbE NIC.
  */
 static void
-ixgbe_vmdq_rx_hw_configure(struct rte_eth_dev *dev)
+ixgbe_vmdq_pool_configure(struct rte_eth_dev *dev)
 {
 	struct rte_eth_vmdq_rx_conf *cfg;
 	struct ixgbe_hw *hw;
 	enum rte_eth_nb_pools num_pools;
-	uint32_t mrqc, vt_ctl, vlanctrl;
+	uint32_t vt_ctl, vlanctrl;
 	uint32_t vmolr = 0;
 	int i;
 
@@ -3463,12 +3463,6 @@ ixgbe_vmdq_rx_hw_configure(struct rte_eth_dev *dev)
 	cfg = &dev->data->dev_conf.rx_adv_conf.vmdq_rx_conf;
 	num_pools = cfg->nb_queue_pools;
 
-	ixgbe_rss_disable(dev);
-
-	/* MRQC: enable vmdq */
-	mrqc = IXGBE_MRQC_VMDQEN;
-	IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
-
 	/* PFVTCTL: turn on virtualisation and set the default pool */
 	vt_ctl = IXGBE_VT_CTL_VT_ENABLE | IXGBE_VT_CTL_REPLEN;
 	if (cfg->enable_default_pool)
@@ -3534,7 +3528,29 @@ ixgbe_vmdq_rx_hw_configure(struct rte_eth_dev *dev)
 	IXGBE_WRITE_FLUSH(hw);
 }
 
-/*
+/**
+ * VMDq only support for 10 GbE NIC.
+ */
+static void
+ixgbe_vmdq_rx_hw_configure(struct rte_eth_dev *dev)
+{
+	struct ixgbe_hw *hw;
+	uint32_t mrqc;
+
+	PMD_INIT_FUNC_TRACE();
+	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	ixgbe_rss_disable(dev);
+
+	/* MRQC: enable vmdq */
+	mrqc = IXGBE_MRQC_VMDQEN;
+	IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+	IXGBE_WRITE_FLUSH(hw);
+
+	ixgbe_vmdq_pool_configure(dev);
+}
+
+/**
  * ixgbe_dcb_config_tx_hw_config - Configure general VMDq TX parameters
  * @hw: pointer to hardware structure
  */
@@ -3639,6 +3655,41 @@ ixgbe_config_vf_rss(struct rte_eth_dev *dev)
 }
 
 static int
+ixgbe_config_vmdq_rss(struct rte_eth_dev *dev)
+{
+	struct ixgbe_hw *hw;
+	uint32_t mrqc;
+
+	ixgbe_rss_configure(dev);
+
+	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	/* MRQC: enable VMDQ RSS */
+	mrqc = IXGBE_READ_REG(hw, IXGBE_MRQC);
+	mrqc &= ~IXGBE_MRQC_MRQE_MASK;
+
+	switch (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) {
+	case 2:
+		mrqc |= IXGBE_MRQC_VMDQRSS64EN;
+		break;
+
+	case 4:
+		mrqc |= IXGBE_MRQC_VMDQRSS32EN;
+		break;
+
+	default:
+		PMD_INIT_LOG(ERR, "Invalid pool number in non-IOV mode with VMDQ RSS");
+		return -EINVAL;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+
+	ixgbe_vmdq_pool_configure(dev);
+
+	return 0;
+}
+
+static int
 ixgbe_config_vf_default(struct rte_eth_dev *dev)
 {
 	struct ixgbe_hw *hw =
@@ -3694,6 +3745,10 @@ ixgbe_dev_mq_rx_configure(struct rte_eth_dev *dev)
 				ixgbe_vmdq_rx_hw_configure(dev);
 				break;
 
+			case ETH_MQ_RX_VMDQ_RSS:
+				ixgbe_config_vmdq_rss(dev);
+				break;
+
 			case ETH_MQ_RX_NONE:
 				/* if mq_mode is none, disable rss mode.*/
 			default: ixgbe_rss_disable(dev);
@@ -4186,6 +4241,8 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 
 	/* Setup RX queues */
 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
+		uint32_t psrtype = 0;
+
 		rxq = dev->data->rx_queues[i];
 
 		/*
@@ -4213,12 +4270,10 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 		if (rx_conf->header_split) {
 			if (hw->mac.type == ixgbe_mac_82599EB) {
 				/* Must setup the PSRTYPE register */
-				uint32_t psrtype;
 				psrtype = IXGBE_PSRTYPE_TCPHDR |
 					IXGBE_PSRTYPE_UDPHDR   |
 					IXGBE_PSRTYPE_IPV4HDR  |
 					IXGBE_PSRTYPE_IPV6HDR;
-				IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(rxq->reg_idx), psrtype);
 			}
 			srrctl = ((rx_conf->split_hdr_size <<
 				IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
@@ -4228,6 +4283,11 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 #endif
 			srrctl = IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
 
+		/* Set RQPL for VMDQ RSS according to max Rx queue */
+		psrtype |= (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool >> 1) <<
+			IXGBE_PSRTYPE_RQPL_SHIFT;
+		IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(rxq->reg_idx), psrtype);
+
 		/* Set if packets are dropped when no descriptors available */
 		if (rxq->drop_en)
 			srrctl |= IXGBE_SRRCTL_DROP_EN;
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index b309309..9e90ca4 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1067,6 +1067,17 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 				return -EINVAL;
 			}
 		}
+
+		if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_RSS) {
+			uint32_t nb_queue_pools =
+				dev_conf->rx_adv_conf.vmdq_rx_conf.nb_queue_pools;
+			struct rte_eth_dev_info dev_info;
+
+			rte_eth_dev_info_get(port_id, &dev_info);
+			dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
+			RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool =
+				dev_info.vmdq_queue_num / nb_queue_pools;
+		}
 	}
 	return 0;
 }
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 11/12] examples/vhost: demonstrate the usage of vhost mq feature

[Yuanhan Liu]

From: Changchun Ouyang <changchun.ouyang@intel.com>

This patch demonstrates the usage of vhost mq feature, by leveraging
the VMDq+RSS HW feature to receive packets and distribute them into
different queue in the pool according to 5 tuples.

Queue number is specified by the --rxq option.

HW queue numbers in pool is exactly same with the queue number in virtio
device, e.g. rxq = 4, the queue number is 4, it means 4 HW queues in
each VMDq pool, and 4 queues in each virtio device/port, one maps to
each.

=========================================
==================|   |==================|
       vport0     |   |      vport1      |
---  ---  ---  ---|   |---  ---  ---  ---|
q0 | q1 | q2 | q3 |   |q0 | q1 | q2 | q3 |
/\= =/\= =/\= =/\=|   |/\= =/\= =/\= =/\=|
||   ||   ||   ||      ||   ||   ||   ||
||   ||   ||   ||      ||   ||   ||   ||
||= =||= =||= =||=|   =||== ||== ||== ||=|
q0 | q1 | q2 | q3 |   |q0 | q1 | q2 | q3 |

------------------|   |------------------|
     VMDq pool0   |   |    VMDq pool1    |
==================|   |==================|

In RX side, it firstly polls each queue of the pool and gets the
packets from it and enqueue them into its corresponding queue in
virtio device/port.  In TX side, it dequeue packets from each queue
of virtio device/port and send them to either physical port or
another virtio device according to its destination MAC address.

We bind the virtq to a specific core by rte_vhost_core_id_set(),
and later we can retrieve it by rte_vhost_core_id_get().

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 examples/vhost/main.c | 325 ++++++++++++++++++++++++++++++++++----------------
 examples/vhost/main.h |   3 +-
 2 files changed, 225 insertions(+), 103 deletions(-)

diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 9eac2d0..23b7aa7 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -163,6 +163,9 @@ static int mergeable;
 /* Do vlan strip on host, enabled on default */
 static uint32_t vlan_strip = 1;
 
+/* Rx queue number per virtio device */
+static uint32_t rxq = 1;
+
 /* number of descriptors to apply*/
 static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
 static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP;
@@ -365,6 +368,37 @@ validate_num_devices(uint32_t max_nb_devices)
 	return 0;
 }
 
+static int
+get_dev_nb_for_82599(struct rte_eth_dev_info dev_info)
+{
+	int dev_nb = -1;
+	switch (rxq) {
+	case 1:
+	case 2:
+		/*
+		 * for 82599, dev_info.max_vmdq_pools always 64 dispite rx mode.
+		 */
+		dev_nb = (int)dev_info.max_vmdq_pools;
+		break;
+	case 4:
+		dev_nb = (int)dev_info.max_vmdq_pools / 2;
+		break;
+	default:
+		RTE_LOG(ERR, VHOST_CONFIG, "invalid rxq for VMDq.\n");
+	}
+	return dev_nb;
+}
+
+static int
+get_dev_nb_for_fvl(struct rte_eth_dev_info dev_info)
+{
+	/*
+	 * for FVL, dev_info.max_vmdq_pools is calculated according to
+	 * the configured value: CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM.
+	 */
+	return (int)dev_info.max_vmdq_pools;
+}
+
 /*
  * Initialises a given port using global settings and with the rx buffers
  * coming from the mbuf_pool passed as parameter
@@ -380,6 +414,7 @@ port_init(uint8_t port)
 	uint16_t rx_ring_size, tx_ring_size;
 	int retval;
 	uint16_t q;
+	struct rte_eth_dev *eth_dev;
 
 	/* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
 	rte_eth_dev_info_get (port, &dev_info);
@@ -408,8 +443,16 @@ port_init(uint8_t port)
 		txconf->tx_deferred_start = 1;
 	}
 
-	/*configure the number of supported virtio devices based on VMDQ limits */
-	num_devices = dev_info.max_vmdq_pools;
+	/* Configure the virtio devices num based on VMDQ limits */
+	if (dev_info.max_vmdq_pools == ETH_64_POOLS) {
+		num_devices = (uint32_t)get_dev_nb_for_82599(dev_info);
+		if (num_devices == (uint32_t)-1)
+			return -1;
+	} else {
+		num_devices = (uint32_t)get_dev_nb_for_fvl(dev_info);
+		if (num_devices == (uint32_t)-1)
+			return -1;
+	}
 
 	if (zero_copy) {
 		rx_ring_size = num_rx_descriptor;
@@ -431,7 +474,7 @@ port_init(uint8_t port)
 		return retval;
 	/* NIC queues are divided into pf queues and vmdq queues.  */
 	num_pf_queues = dev_info.max_rx_queues - dev_info.vmdq_queue_num;
-	queues_per_pool = dev_info.vmdq_queue_num / dev_info.max_vmdq_pools;
+	queues_per_pool = dev_info.vmdq_queue_num / num_devices;
 	num_vmdq_queues = num_devices * queues_per_pool;
 	num_queues = num_pf_queues + num_vmdq_queues;
 	vmdq_queue_base = dev_info.vmdq_queue_base;
@@ -447,6 +490,14 @@ port_init(uint8_t port)
 	if (retval != 0)
 		return retval;
 
+	eth_dev = &rte_eth_devices[port];
+	if (RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool > 4) {
+		RTE_LOG(ERR, VHOST_CONFIG, "ethdev port_id=%d SRIOV active, "
+			"invalid queue number for VMDQ RSS, allowed value "
+			"are 1, 2 or 4\n", port);
+		return -EINVAL;
+	}
+
 	/* Setup the queues. */
 	for (q = 0; q < rx_rings; q ++) {
 		retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
@@ -576,7 +627,8 @@ us_vhost_usage(const char *prgname)
 	"		--rx-desc-num [0-N]: the number of descriptors on rx, "
 			"used only when zero copy is enabled.\n"
 	"		--tx-desc-num [0-N]: the number of descriptors on tx, "
-			"used only when zero copy is enabled.\n",
+			"used only when zero copy is enabled.\n"
+	"		--rxq [1,2,4]: rx queue number for each vhost device\n",
 	       prgname);
 }
 
@@ -602,6 +654,7 @@ us_vhost_parse_args(int argc, char **argv)
 		{"zero-copy", required_argument, NULL, 0},
 		{"rx-desc-num", required_argument, NULL, 0},
 		{"tx-desc-num", required_argument, NULL, 0},
+		{"rxq", required_argument, NULL, 0},
 		{NULL, 0, 0, 0},
 	};
 
@@ -778,6 +831,18 @@ us_vhost_parse_args(int argc, char **argv)
 				}
 			}
 
+			/* Specify the Rx queue number for each vhost dev. */
+			if (!strncmp(long_option[option_index].name,
+				"rxq", MAX_LONG_OPT_SZ)) {
+				ret = parse_num_opt(optarg, 4);
+				if ((ret == -1) || (ret == 0) || (!POWEROF2(ret))) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+					"Valid value for rxq is [1,2,4]\n");
+					us_vhost_usage(prgname);
+					return -1;
+				} else
+					rxq = ret;
+			}
 			break;
 
 			/* Invalid option - print options. */
@@ -813,6 +878,19 @@ us_vhost_parse_args(int argc, char **argv)
 		return -1;
 	}
 
+	if (rxq > 1) {
+		vmdq_conf_default.rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
+		vmdq_conf_default.rx_adv_conf.rss_conf.rss_hf = ETH_RSS_IP |
+				ETH_RSS_UDP | ETH_RSS_TCP | ETH_RSS_SCTP;
+	}
+
+	if ((zero_copy == 1) && (rxq > 1)) {
+		RTE_LOG(INFO, VHOST_PORT,
+			"Vhost zero copy doesn't support mq mode,"
+			"please specify '--rxq 1' to disable it.\n");
+		return -1;
+	}
+
 	return 0;
 }
 
@@ -959,9 +1037,11 @@ link_vmdq(struct vhost_dev *vdev, struct rte_mbuf *m)
 					dev->device_fh);
 
 	/* Enable stripping of the vlan tag as we handle routing. */
-	if (vlan_strip)
-		rte_eth_dev_set_vlan_strip_on_queue(ports[0],
-			(uint16_t)vdev->vmdq_rx_q, 1);
+	if (vlan_strip) {
+		for (i = 0; i < (int)rxq; i++)
+			rte_eth_dev_set_vlan_strip_on_queue(ports[0],
+				(uint16_t)(vdev->vmdq_rx_q + i), 1);
+	}
 
 	/* Set device as ready for RX. */
 	vdev->ready = DEVICE_RX;
@@ -976,7 +1056,7 @@ link_vmdq(struct vhost_dev *vdev, struct rte_mbuf *m)
 static inline void
 unlink_vmdq(struct vhost_dev *vdev)
 {
-	unsigned i = 0;
+	unsigned i = 0, j = 0;
 	unsigned rx_count;
 	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
 
@@ -989,15 +1069,19 @@ unlink_vmdq(struct vhost_dev *vdev)
 		vdev->vlan_tag = 0;
 
 		/*Clear out the receive buffers*/
-		rx_count = rte_eth_rx_burst(ports[0],
-					(uint16_t)vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+		for (i = 0; i < rxq; i++) {
+			rx_count = rte_eth_rx_burst(ports[0],
+					(uint16_t)vdev->vmdq_rx_q + i,
+					pkts_burst, MAX_PKT_BURST);
 
-		while (rx_count) {
-			for (i = 0; i < rx_count; i++)
-				rte_pktmbuf_free(pkts_burst[i]);
+			while (rx_count) {
+				for (j = 0; j < rx_count; j++)
+					rte_pktmbuf_free(pkts_burst[j]);
 
-			rx_count = rte_eth_rx_burst(ports[0],
-					(uint16_t)vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+				rx_count = rte_eth_rx_burst(ports[0],
+					(uint16_t)vdev->vmdq_rx_q + i,
+					pkts_burst, MAX_PKT_BURST);
+			}
 		}
 
 		vdev->ready = DEVICE_MAC_LEARNING;
@@ -1009,7 +1093,7 @@ unlink_vmdq(struct vhost_dev *vdev)
  * the packet on that devices RX queue. If not then return.
  */
 static inline int __attribute__((always_inline))
-virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
+virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m, uint32_t qp_idx)
 {
 	struct virtio_net_data_ll *dev_ll;
 	struct ether_hdr *pkt_hdr;
@@ -1024,7 +1108,7 @@ virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
 
 	while (dev_ll != NULL) {
 		if ((dev_ll->vdev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
-				          &dev_ll->vdev->mac_address)) {
+					&dev_ll->vdev->mac_address)) {
 
 			/* Drop the packet if the TX packet is destined for the TX device. */
 			if (dev_ll->vdev->dev->device_fh == dev->device_fh) {
@@ -1042,7 +1126,9 @@ virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
 				LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", tdev->device_fh);
 			} else {
 				/*send the packet to the local virtio device*/
-				ret = rte_vhost_enqueue_burst(tdev, VIRTIO_RXQ, &m, 1);
+				ret = rte_vhost_enqueue_burst(tdev,
+					VIRTIO_RXQ + qp_idx * VIRTIO_QNUM,
+					&m, 1);
 				if (enable_stats) {
 					rte_atomic64_add(
 					&dev_statistics[tdev->device_fh].rx_total_atomic,
@@ -1119,7 +1205,8 @@ find_local_dest(struct virtio_net *dev, struct rte_mbuf *m,
  * or the physical port.
  */
 static inline void __attribute__((always_inline))
-virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag)
+virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m,
+		uint16_t vlan_tag, uint32_t qp_idx)
 {
 	struct mbuf_table *tx_q;
 	struct rte_mbuf **m_table;
@@ -1129,7 +1216,8 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag)
 	struct ether_hdr *nh;
 
 	/*check if destination is local VM*/
-	if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(vdev, m) == 0)) {
+	if ((vm2vm_mode == VM2VM_SOFTWARE) &&
+	    (virtio_tx_local(vdev, m, qp_idx) == 0)) {
 		rte_pktmbuf_free(m);
 		return;
 	}
@@ -1293,22 +1381,26 @@ switch_worker(__attribute__((unused)) void *arg)
 			}
 			if (likely(vdev->ready == DEVICE_RX)) {
 				/*Handle guest RX*/
+				uint16_t qp_idx = dev_ll->work_qp_idx;
 				rx_count = rte_eth_rx_burst(ports[0],
-					vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+					vdev->vmdq_rx_q + qp_idx, pkts_burst, MAX_PKT_BURST);
 
 				if (rx_count) {
 					/*
 					* Retry is enabled and the queue is full then we wait and retry to avoid packet loss
 					* Here MAX_PKT_BURST must be less than virtio queue size
 					*/
-					if (enable_retry && unlikely(rx_count > rte_vring_available_entries(dev, VIRTIO_RXQ))) {
+					if (enable_retry && unlikely(rx_count > rte_vring_available_entries(dev,
+										VIRTIO_RXQ + qp_idx * VIRTIO_QNUM))) {
 						for (retry = 0; retry < burst_rx_retry_num; retry++) {
 							rte_delay_us(burst_rx_delay_time);
-							if (rx_count <= rte_vring_available_entries(dev, VIRTIO_RXQ))
+							if (rx_count <= rte_vring_available_entries(dev,
+										VIRTIO_RXQ + qp_idx * VIRTIO_QNUM))
 								break;
 						}
 					}
-					ret_count = rte_vhost_enqueue_burst(dev, VIRTIO_RXQ, pkts_burst, rx_count);
+					ret_count = rte_vhost_enqueue_burst(dev, VIRTIO_RXQ + qp_idx * VIRTIO_QNUM,
+										pkts_burst, rx_count);
 					if (enable_stats) {
 						rte_atomic64_add(
 						&dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic,
@@ -1320,14 +1412,18 @@ switch_worker(__attribute__((unused)) void *arg)
 						rx_count--;
 						rte_pktmbuf_free(pkts_burst[rx_count]);
 					}
-
 				}
 			}
 
 			if (likely(!vdev->remove)) {
 				/* Handle guest TX*/
-				tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST);
-				/* If this is the first received packet we need to learn the MAC and setup VMDQ */
+				uint16_t qp_idx = dev_ll->work_qp_idx;
+				tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ + qp_idx * VIRTIO_QNUM,
+						mbuf_pool, pkts_burst, MAX_PKT_BURST);
+				/*
+				 * If this is the first received packet we need to learn
+				 * the MAC and setup VMDQ
+				 */
 				if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
 					if (vdev->remove || (link_vmdq(vdev, pkts_burst[0]) == -1)) {
 						while (tx_count)
@@ -1335,7 +1431,8 @@ switch_worker(__attribute__((unused)) void *arg)
 					}
 				}
 				while (tx_count)
-					virtio_tx_route(vdev, pkts_burst[--tx_count], (uint16_t)dev->device_fh);
+					virtio_tx_route(vdev, pkts_burst[--tx_count],
+						(uint16_t)dev->device_fh, qp_idx);
 			}
 
 			/*move to the next device in the list*/
@@ -2323,6 +2420,7 @@ destroy_device (volatile struct virtio_net *dev)
 	struct virtio_net_data_ll *ll_main_dev_last = NULL;
 	struct vhost_dev *vdev;
 	int lcore;
+	uint32_t i;
 
 	dev->flags &= ~VIRTIO_DEV_RUNNING;
 
@@ -2334,61 +2432,73 @@ destroy_device (volatile struct virtio_net *dev)
 	}
 
 	/* Search for entry to be removed from lcore ll */
-	ll_lcore_dev_cur = lcore_info[vdev->coreid].lcore_ll->ll_root_used;
-	while (ll_lcore_dev_cur != NULL) {
-		if (ll_lcore_dev_cur->vdev == vdev) {
-			break;
-		} else {
-			ll_lcore_dev_last = ll_lcore_dev_cur;
-			ll_lcore_dev_cur = ll_lcore_dev_cur->next;
+	for (i = 0; i < rxq; i++) {
+		uint16_t core_id = rte_vhost_core_id_get(dev, i);
+
+		ll_lcore_dev_cur = lcore_info[core_id].lcore_ll->ll_root_used;
+
+		while (ll_lcore_dev_cur != NULL) {
+			if (ll_lcore_dev_cur->vdev == vdev) {
+				break;
+			} else {
+				ll_lcore_dev_last = ll_lcore_dev_cur;
+				ll_lcore_dev_cur = ll_lcore_dev_cur->next;
+			}
 		}
-	}
 
-	if (ll_lcore_dev_cur == NULL) {
-		RTE_LOG(ERR, VHOST_CONFIG,
-			"(%"PRIu64") Failed to find the dev to be destroy.\n",
-			dev->device_fh);
-		return;
-	}
+		if (ll_lcore_dev_cur == NULL) {
+			RTE_LOG(ERR, VHOST_CONFIG,
+				"(%"PRIu64") Failed to find the dev to be destroy.\n",
+				dev->device_fh);
+			if (i == 0)
+				return;
+			else
+				break;
+		}
 
-	/* Search for entry to be removed from main ll */
-	ll_main_dev_cur = ll_root_used;
-	ll_main_dev_last = NULL;
-	while (ll_main_dev_cur != NULL) {
-		if (ll_main_dev_cur->vdev == vdev) {
-			break;
-		} else {
-			ll_main_dev_last = ll_main_dev_cur;
-			ll_main_dev_cur = ll_main_dev_cur->next;
+		/* Search for entry to be removed from main ll */
+		if (i == 0) {
+			ll_main_dev_cur = ll_root_used;
+			ll_main_dev_last = NULL;
+			while (ll_main_dev_cur != NULL) {
+				if (ll_main_dev_cur->vdev == vdev) {
+					break;
+				} else {
+					ll_main_dev_last = ll_main_dev_cur;
+					ll_main_dev_cur = ll_main_dev_cur->next;
+				}
+			}
 		}
-	}
 
-	/* Remove entries from the lcore and main ll. */
-	rm_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
-	rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
+		/* Remove entries from the lcore and main ll. */
+		rm_data_ll_entry(&lcore_info[core_id].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
+		if (i == 0)
+			rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
 
-	/* Set the dev_removal_flag on each lcore. */
-	RTE_LCORE_FOREACH_SLAVE(lcore) {
-		lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
-	}
+		/* Set the dev_removal_flag on each lcore. */
+		RTE_LCORE_FOREACH_SLAVE(lcore) {
+			lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
+		}
 
-	/*
-	 * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
-	 * they can no longer access the device removed from the linked lists and that the devices
-	 * are no longer in use.
-	 */
-	RTE_LCORE_FOREACH_SLAVE(lcore) {
-		while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) {
-			rte_pause();
+		/*
+		 * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
+		 * they can no longer access the device removed from the linked lists and that the devices
+		 * are no longer in use.
+		 */
+		RTE_LCORE_FOREACH_SLAVE(lcore) {
+			while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL)
+				rte_pause();
 		}
-	}
 
-	/* Add the entries back to the lcore and main free ll.*/
-	put_data_ll_free_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
-	put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
+		/* Add the entries back to the lcore and main free ll.*/
+		put_data_ll_free_entry(&lcore_info[core_id].lcore_ll->ll_root_free, ll_lcore_dev_cur);
+
+		if (i == 0)
+			put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
 
-	/* Decrement number of device on the lcore. */
-	lcore_info[vdev->coreid].lcore_ll->device_num--;
+		/* Decrement number of device on the lcore. */
+		lcore_info[core_id].lcore_ll->device_num--;
+	}
 
 	RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
 
@@ -2593,6 +2703,14 @@ new_device (struct virtio_net *dev)
 	uint32_t device_num_min = num_devices;
 	struct vhost_dev *vdev;
 	uint32_t regionidx;
+	uint32_t i;
+
+	if ((rxq > 1) && (dev->virt_qp_nb != rxq)) {
+		RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") queue num in VMDq pool:"
+			"%d != queue pair num in vhost dev:%d\n",
+			dev->device_fh, rxq, dev->virt_qp_nb);
+		return -1;
+	}
 
 	vdev = rte_zmalloc("vhost device", sizeof(*vdev), RTE_CACHE_LINE_SIZE);
 	if (vdev == NULL) {
@@ -2638,12 +2756,12 @@ new_device (struct virtio_net *dev)
 		}
 	}
 
-
 	/* Add device to main ll */
 	ll_dev = get_data_ll_free_entry(&ll_root_free);
 	if (ll_dev == NULL) {
-		RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
-			"of %d devices per core has been reached\n",
+		RTE_LOG(INFO, VHOST_DATA,
+			"(%"PRIu64") No free entry found in linked list."
+			"Device limit of %d devices per core has been reached\n",
 			dev->device_fh, num_devices);
 		if (vdev->regions_hpa)
 			rte_free(vdev->regions_hpa);
@@ -2652,8 +2770,7 @@ new_device (struct virtio_net *dev)
 	}
 	ll_dev->vdev = vdev;
 	add_data_ll_entry(&ll_root_used, ll_dev);
-	vdev->vmdq_rx_q
-		= dev->device_fh * queues_per_pool + vmdq_queue_base;
+	vdev->vmdq_rx_q	= dev->device_fh * rxq + vmdq_queue_base;
 
 	if (zero_copy) {
 		uint32_t index = vdev->vmdq_rx_q;
@@ -2734,37 +2851,42 @@ new_device (struct virtio_net *dev)
 	vdev->remove = 0;
 
 	/* Find a suitable lcore to add the device. */
-	RTE_LCORE_FOREACH_SLAVE(lcore) {
-		if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
-			device_num_min = lcore_info[lcore].lcore_ll->device_num;
-			core_add = lcore;
+	for (i = 0; i < rxq; i++) {
+		device_num_min = num_devices;
+		RTE_LCORE_FOREACH_SLAVE(lcore) {
+			if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
+				device_num_min = lcore_info[lcore].lcore_ll->device_num;
+				core_add = lcore;
+			}
 		}
-	}
-	/* Add device to lcore ll */
-	ll_dev = get_data_ll_free_entry(&lcore_info[core_add].lcore_ll->ll_root_free);
-	if (ll_dev == NULL) {
-		RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
-		vdev->ready = DEVICE_SAFE_REMOVE;
-		destroy_device(dev);
-		rte_free(vdev->regions_hpa);
-		rte_free(vdev);
-		return -1;
-	}
-	ll_dev->vdev = vdev;
-	vdev->coreid = core_add;
+		/* Add device to lcore ll */
+		ll_dev = get_data_ll_free_entry(&lcore_info[core_add].lcore_ll->ll_root_free);
+		if (ll_dev == NULL) {
+			RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
+			vdev->ready = DEVICE_SAFE_REMOVE;
+			destroy_device(dev);
+			rte_free(vdev->regions_hpa);
+			rte_free(vdev);
+			return -1;
+		}
+		ll_dev->vdev = vdev;
+		ll_dev->work_qp_idx = i;
+		rte_vhost_core_id_set(dev, i, core_add);
+		add_data_ll_entry(&lcore_info[core_add].lcore_ll->ll_root_used, ll_dev);
 
-	add_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_dev);
+		/* Disable notifications. */
+		rte_vhost_enable_guest_notification(dev, i * VIRTIO_QNUM + VIRTIO_RXQ, 0);
+		rte_vhost_enable_guest_notification(dev, i * VIRTIO_QNUM + VIRTIO_TXQ, 0);
+		lcore_info[core_add].lcore_ll->device_num++;
+		RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d for vq: %d\n",
+			dev->device_fh, core_add, i);
+	}
 
 	/* Initialize device stats */
 	memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
 
-	/* Disable notifications. */
-	rte_vhost_enable_guest_notification(dev, VIRTIO_RXQ, 0);
-	rte_vhost_enable_guest_notification(dev, VIRTIO_TXQ, 0);
-	lcore_info[vdev->coreid].lcore_ll->device_num++;
 	dev->flags |= VIRTIO_DEV_RUNNING;
 
-	RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, vdev->coreid);
 
 	return 0;
 }
@@ -2833,6 +2955,7 @@ print_stats(void)
 					rx_dropped,
 					rx);
 
+
 			dev_ll = dev_ll->next;
 		}
 		printf("\n======================================================\n");
diff --git a/examples/vhost/main.h b/examples/vhost/main.h
index d04e2be..5561c82 100644
--- a/examples/vhost/main.h
+++ b/examples/vhost/main.h
@@ -82,8 +82,6 @@ struct vhost_dev {
 	uint16_t vmdq_rx_q;
 	/**< Vlan tag assigned to the pool */
 	uint32_t vlan_tag;
-	/**< Data core that the device is added to. */
-	uint16_t coreid;
 	/**< A device is set as ready if the MAC address has been set. */
 	volatile uint8_t ready;
 	/**< Device is marked for removal from the data core. */
@@ -94,6 +92,7 @@ struct virtio_net_data_ll
 {
 	struct vhost_dev		*vdev;	/* Pointer to device created by configuration core. */
 	struct virtio_net_data_ll	*next;  /* Pointer to next device in linked list. */
+	uint32_t work_qp_idx;
 };
 
 /*
-- 
1.9.0

[dpdk-dev] [PATCH v5 resend 12/12] examples/vhost: add per queue stats

[Yuanhan Liu]

From: Changchun Ouyang <changchun.ouyang@intel.com>

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
 examples/vhost/main.c | 97 +++++++++++++++++++++++++++++----------------------
 1 file changed, 56 insertions(+), 41 deletions(-)

diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 23b7aa7..06a3ac7 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -314,7 +314,7 @@ struct ipv4_hdr {
 #define VLAN_ETH_HLEN   18
 
 /* Per-device statistics struct */
-struct device_statistics {
+struct qp_statistics {
 	uint64_t tx_total;
 	rte_atomic64_t rx_total_atomic;
 	uint64_t rx_total;
@@ -322,6 +322,10 @@ struct device_statistics {
 	rte_atomic64_t rx_atomic;
 	uint64_t rx;
 } __rte_cache_aligned;
+
+struct device_statistics {
+	struct qp_statistics *qp_stats;
+};
 struct device_statistics dev_statistics[MAX_DEVICES];
 
 /*
@@ -775,6 +779,17 @@ us_vhost_parse_args(int argc, char **argv)
 					return -1;
 				} else {
 					enable_stats = ret;
+					if (enable_stats)
+						for (i = 0; i < MAX_DEVICES; i++) {
+							dev_statistics[i].qp_stats =
+								malloc(VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX * sizeof(struct qp_statistics));
+							if (dev_statistics[i].qp_stats == NULL) {
+								RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for qp stats.\n");
+								return -1;
+							}
+							memset(dev_statistics[i].qp_stats, 0,
+								VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX * sizeof(struct qp_statistics));
+						}
 				}
 			}
 
@@ -1131,13 +1146,13 @@ virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m, uint32_t qp_idx)
 					&m, 1);
 				if (enable_stats) {
 					rte_atomic64_add(
-					&dev_statistics[tdev->device_fh].rx_total_atomic,
+					&dev_statistics[tdev->device_fh].qp_stats[qp_idx].rx_total_atomic,
 					1);
 					rte_atomic64_add(
-					&dev_statistics[tdev->device_fh].rx_atomic,
+					&dev_statistics[tdev->device_fh].qp_stats[qp_idx].rx_atomic,
 					ret);
-					dev_statistics[tdev->device_fh].tx_total++;
-					dev_statistics[tdev->device_fh].tx += ret;
+					dev_statistics[dev->device_fh].qp_stats[qp_idx].tx_total++;
+					dev_statistics[dev->device_fh].qp_stats[qp_idx].tx += ret;
 				}
 			}
 
@@ -1271,8 +1286,8 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m,
 	tx_q->m_table[len] = m;
 	len++;
 	if (enable_stats) {
-		dev_statistics[dev->device_fh].tx_total++;
-		dev_statistics[dev->device_fh].tx++;
+		dev_statistics[dev->device_fh].qp_stats[qp_idx].tx_total++;
+		dev_statistics[dev->device_fh].qp_stats[qp_idx].tx++;
 	}
 
 	if (unlikely(len == MAX_PKT_BURST)) {
@@ -1403,10 +1418,10 @@ switch_worker(__attribute__((unused)) void *arg)
 										pkts_burst, rx_count);
 					if (enable_stats) {
 						rte_atomic64_add(
-						&dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic,
+						&dev_statistics[dev_ll->vdev->dev->device_fh].qp_stats[qp_idx].rx_total_atomic,
 						rx_count);
 						rte_atomic64_add(
-						&dev_statistics[dev_ll->vdev->dev->device_fh].rx_atomic, ret_count);
+						&dev_statistics[dev_ll->vdev->dev->device_fh].qp_stats[qp_idx].rx_atomic, ret_count);
 					}
 					while (likely(rx_count)) {
 						rx_count--;
@@ -1954,8 +1969,8 @@ virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
 		(mbuf->next == NULL) ? "null" : "non-null");
 
 	if (enable_stats) {
-		dev_statistics[dev->device_fh].tx_total++;
-		dev_statistics[dev->device_fh].tx++;
+		dev_statistics[dev->device_fh].qp_stats[0].tx_total++;
+		dev_statistics[dev->device_fh].qp_stats[0].tx++;
 	}
 
 	if (unlikely(len == MAX_PKT_BURST)) {
@@ -2238,9 +2253,9 @@ switch_worker_zcp(__attribute__((unused)) void *arg)
 					ret_count = virtio_dev_rx_zcp(dev,
 							pkts_burst, rx_count);
 					if (enable_stats) {
-						dev_statistics[dev->device_fh].rx_total
+						dev_statistics[dev->device_fh].qp_stats[0].rx_total
 							+= rx_count;
-						dev_statistics[dev->device_fh].rx
+						dev_statistics[dev->device_fh].qp_stats[0].rx
 							+= ret_count;
 					}
 					while (likely(rx_count)) {
@@ -2883,7 +2898,9 @@ new_device (struct virtio_net *dev)
 	}
 
 	/* Initialize device stats */
-	memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
+	if (enable_stats)
+		memset(dev_statistics[dev->device_fh].qp_stats, 0,
+			VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX * sizeof(struct qp_statistics));
 
 	dev->flags |= VIRTIO_DEV_RUNNING;
 
@@ -2911,7 +2928,7 @@ print_stats(void)
 	struct virtio_net_data_ll *dev_ll;
 	uint64_t tx_dropped, rx_dropped;
 	uint64_t tx, tx_total, rx, rx_total;
-	uint32_t device_fh;
+	uint32_t device_fh, i;
 	const char clr[] = { 27, '[', '2', 'J', '\0' };
 	const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' };
 
@@ -2926,36 +2943,37 @@ print_stats(void)
 		dev_ll = ll_root_used;
 		while (dev_ll != NULL) {
 			device_fh = (uint32_t)dev_ll->vdev->dev->device_fh;
-			tx_total = dev_statistics[device_fh].tx_total;
-			tx = dev_statistics[device_fh].tx;
-			tx_dropped = tx_total - tx;
-			if (zero_copy == 0) {
-				rx_total = rte_atomic64_read(
-					&dev_statistics[device_fh].rx_total_atomic);
-				rx = rte_atomic64_read(
-					&dev_statistics[device_fh].rx_atomic);
-			} else {
-				rx_total = dev_statistics[device_fh].rx_total;
-				rx = dev_statistics[device_fh].rx;
-			}
-			rx_dropped = rx_total - rx;
-
-			printf("\nStatistics for device %"PRIu32" ------------------------------"
-					"\nTX total: 		%"PRIu64""
-					"\nTX dropped: 		%"PRIu64""
-					"\nTX successful: 		%"PRIu64""
-					"\nRX total: 		%"PRIu64""
-					"\nRX dropped: 		%"PRIu64""
-					"\nRX successful: 		%"PRIu64"",
+			for (i = 0; i < rxq; i++) {
+				tx_total = dev_statistics[device_fh].qp_stats[i].tx_total;
+				tx = dev_statistics[device_fh].qp_stats[i].tx;
+				tx_dropped = tx_total - tx;
+				if (zero_copy == 0) {
+					rx_total = rte_atomic64_read(
+						&dev_statistics[device_fh].qp_stats[i].rx_total_atomic);
+					rx = rte_atomic64_read(
+						&dev_statistics[device_fh].qp_stats[i].rx_atomic);
+				} else {
+					rx_total = dev_statistics[device_fh].qp_stats[0].rx_total;
+					rx = dev_statistics[device_fh].qp_stats[0].rx;
+				}
+				rx_dropped = rx_total - rx;
+
+				printf("\nStatistics for device %"PRIu32" queue id: %d------------------"
+					"\nTX total:		%"PRIu64""
+					"\nTX dropped:		%"PRIu64""
+					"\nTX success:		%"PRIu64""
+					"\nRX total:		%"PRIu64""
+					"\nRX dropped:		%"PRIu64""
+					"\nRX success:		%"PRIu64"",
 					device_fh,
+					i,
 					tx_total,
 					tx_dropped,
 					tx,
 					rx_total,
 					rx_dropped,
 					rx);
-
-
+			}
 			dev_ll = dev_ll->next;
 		}
 		printf("\n======================================================\n");
@@ -3137,9 +3155,6 @@ main(int argc, char *argv[])
 	if (init_data_ll() == -1)
 		rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
 
-	/* Initialize device stats */
-	memset(&dev_statistics, 0, sizeof(dev_statistics));
-
 	/* Enable stats if the user option is set. */
 	if (enable_stats)
 		pthread_create(&tid, NULL, (void*)print_stats, NULL );
-- 
1.9.0

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Michael S. Tsirkin]

On Fri, Sep 18, 2015 at 11:10:56PM +0800, Yuanhan Liu wrote:
> From: Changchun Ouyang <changchun.ouyang@intel.com>
> 
> Fix the max virtio queue pair read issue.
> 
> Control queue can't work for vhost-user mulitple queue mode,
> so introduce a counter to void the dead loop when polling
> the control queue.
> 
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>

Per virtio spec, the multiqueue feature depends on control queue -
what do you mean when you say it can't work?

> ---
>  drivers/net/virtio/virtio_ethdev.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index 465d3cd..b2f4120 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -1162,7 +1162,6 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
>  	struct virtio_hw *hw = eth_dev->data->dev_private;
>  	struct virtio_net_config *config;
>  	struct virtio_net_config local_config;
> -	uint32_t offset_conf = sizeof(config->mac);
>  	struct rte_pci_device *pci_dev;
>  
>  	RTE_BUILD_BUG_ON(RTE_PKTMBUF_HEADROOM < sizeof(struct virtio_net_hdr));
> @@ -1222,7 +1221,9 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
>  		config = &local_config;
>  
>  		if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) {
> -			offset_conf += sizeof(config->status);
> +			vtpci_read_dev_config(hw,
> +				offsetof(struct virtio_net_config, status),
> +				&config->status, sizeof(config->status));
>  		} else {
>  			PMD_INIT_LOG(DEBUG,
>  				     "VIRTIO_NET_F_STATUS is not supported");
> @@ -1230,15 +1231,16 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
>  		}
>  
>  		if (vtpci_with_feature(hw, VIRTIO_NET_F_MQ)) {
> -			offset_conf += sizeof(config->max_virtqueue_pairs);
> +			vtpci_read_dev_config(hw,
> +				offsetof(struct virtio_net_config, max_virtqueue_pairs),
> +				&config->max_virtqueue_pairs,
> +				sizeof(config->max_virtqueue_pairs));
>  		} else {
>  			PMD_INIT_LOG(DEBUG,
>  				     "VIRTIO_NET_F_MQ is not supported");
>  			config->max_virtqueue_pairs = 1;
>  		}
>  
> -		vtpci_read_dev_config(hw, 0, (uint8_t *)config, offset_conf);
> -
>  		hw->max_rx_queues =
>  			(VIRTIO_MAX_RX_QUEUES < config->max_virtqueue_pairs) ?
>  			VIRTIO_MAX_RX_QUEUES : config->max_virtqueue_pairs;


Does the patch actually do what the commit log says?
It seems tobe about reading the device confing,
not breaking out of a loop ...

> -- 
> 1.9.0

Re: [dpdk-dev] [PATCH v5 resend 04/12] vhost: rxtx: prepare work for multiple queue support

[Michael S. Tsirkin]

On Fri, Sep 18, 2015 at 11:10:53PM +0800, Yuanhan Liu wrote:
> From: Changchun Ouyang <changchun.ouyang@intel.com>
> 
> Do not use VIRTIO_RXQ or VIRTIO_TXQ anymore; use the queue_id,
> instead, which will be set to a proper value for a specific queue
> when we have multiple queue support enabled.
> 
> For now, queue_id is still set with VIRTIO_RXQ or VIRTIO_TXQ,
> so it should not break anything.
> 
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>

What I'm missing is the logic that tracks which tx vq
did a specific flow use, to send traffic back on the correct
rx vq.

Is this something added by one of the follow-up patches?


> ---
>  lib/librte_vhost/vhost_rxtx.c | 46 ++++++++++++++++++++++++++++++-------------
>  1 file changed, 32 insertions(+), 14 deletions(-)
> 
> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> index b2b2bcc..a4ab6ca 100644
> --- a/lib/librte_vhost/vhost_rxtx.c
> +++ b/lib/librte_vhost/vhost_rxtx.c
> @@ -42,6 +42,16 @@
>  
>  #define MAX_PKT_BURST 32
>  
> +static inline int __attribute__((always_inline))
> +is_valid_virt_queue_idx(uint32_t virtq_idx, int is_tx, uint32_t max_qp_idx)
> +{
> +	if ((is_tx ^ (virtq_idx & 0x1)) ||
> +	    (virtq_idx >= max_qp_idx * VIRTIO_QNUM))
> +		return 0;
> +
> +	return 1;
> +}
> +
>  /**
>   * This function adds buffers to the virtio devices RX virtqueue. Buffers can
>   * be received from the physical port or from another virtio device. A packet
> @@ -68,12 +78,14 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
>  	uint8_t success = 0;
>  
>  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
> -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> +		RTE_LOG(ERR, VHOST_DATA,
> +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> +			__func__, dev->device_fh, queue_id);
>  		return 0;
>  	}
>  
> -	vq = dev->virtqueue[VIRTIO_RXQ];
> +	vq = dev->virtqueue[queue_id];
>  	count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
>  
>  	/*
> @@ -235,8 +247,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
>  }
>  
>  static inline uint32_t __attribute__((always_inline))
> -copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
> -	uint16_t res_end_idx, struct rte_mbuf *pkt)
> +copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
> +			uint16_t res_base_idx, uint16_t res_end_idx,
> +			struct rte_mbuf *pkt)
>  {
>  	uint32_t vec_idx = 0;
>  	uint32_t entry_success = 0;
> @@ -264,7 +277,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
>  	 * Convert from gpa to vva
>  	 * (guest physical addr -> vhost virtual addr)
>  	 */
> -	vq = dev->virtqueue[VIRTIO_RXQ];
> +	vq = dev->virtqueue[queue_id];
>  	vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
>  	vb_hdr_addr = vb_addr;
>  
> @@ -464,11 +477,14 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
>  
>  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
>  		dev->device_fh);
> -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> +		RTE_LOG(ERR, VHOST_DATA,
> +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> +			__func__, dev->device_fh, queue_id);
> +		return 0;
>  	}
>  
> -	vq = dev->virtqueue[VIRTIO_RXQ];
> +	vq = dev->virtqueue[queue_id];
>  	count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
>  
>  	if (count == 0)
> @@ -509,8 +525,8 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
>  							res_cur_idx);
>  		} while (success == 0);
>  
> -		entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
> -			res_cur_idx, pkts[pkt_idx]);
> +		entry_success = copy_from_mbuf_to_vring(dev, queue_id,
> +			res_base_idx, res_cur_idx, pkts[pkt_idx]);
>  
>  		rte_compiler_barrier();
>  
> @@ -559,12 +575,14 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
>  	uint16_t free_entries, entry_success = 0;
>  	uint16_t avail_idx;
>  
> -	if (unlikely(queue_id != VIRTIO_TXQ)) {
> -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 1, dev->virt_qp_nb))) {
> +		RTE_LOG(ERR, VHOST_DATA,
> +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> +			__func__, dev->device_fh, queue_id);
>  		return 0;
>  	}
>  
> -	vq = dev->virtqueue[VIRTIO_TXQ];
> +	vq = dev->virtqueue[queue_id];
>  	avail_idx =  *((volatile uint16_t *)&vq->avail->idx);
>  
>  	/* If there are no available buffers then return. */
> -- 
> 1.9.0

Re: [dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message

[Michael S. Tsirkin]

On Fri, Sep 18, 2015 at 11:10:54PM +0800, Yuanhan Liu wrote:
> From: Changchun Ouyang <changchun.ouyang@intel.com>
> 
> This message is used to enable/disable a specific vring queue pair.
> The first queue pair is enabled by default.
> 
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> ---
>  lib/librte_vhost/rte_virtio_net.h             |  1 +
>  lib/librte_vhost/vhost_rxtx.c                 | 10 ++++++++++
>  lib/librte_vhost/vhost_user/vhost-net-user.c  |  5 +++++
>  lib/librte_vhost/vhost_user/vhost-net-user.h  |  1 +
>  lib/librte_vhost/vhost_user/virtio-net-user.c | 22 ++++++++++++++++++++++
>  lib/librte_vhost/vhost_user/virtio-net-user.h |  3 +++
>  lib/librte_vhost/virtio-net.c                 | 12 +++++++++---
>  7 files changed, 51 insertions(+), 3 deletions(-)
> 
> diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
> index 5dd6493..08b69df 100644
> --- a/lib/librte_vhost/rte_virtio_net.h
> +++ b/lib/librte_vhost/rte_virtio_net.h
> @@ -89,6 +89,7 @@ struct vhost_virtqueue {
>  	volatile uint16_t	last_used_idx_res;	/**< Used for multiple devices reserving buffers. */
>  	int			callfd;			/**< Used to notify the guest (trigger interrupt). */
>  	int			kickfd;			/**< Currently unused as polling mode is enabled. */
> +	int			enabled;
>  	struct buf_vector	buf_vec[BUF_VECTOR_MAX];	/**< for scatter RX. */
>  } __rte_cache_aligned;
>  
> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> index a4ab6ca..aa9ccda 100644
> --- a/lib/librte_vhost/vhost_rxtx.c
> +++ b/lib/librte_vhost/vhost_rxtx.c
> @@ -86,6 +86,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
>  	}
>  
>  	vq = dev->virtqueue[queue_id];
> +	if (unlikely(vq->enabled == 0))
> +		return 0;
> +
>  	count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
>  
>  	/*
> @@ -278,6 +281,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
>  	 * (guest physical addr -> vhost virtual addr)
>  	 */
>  	vq = dev->virtqueue[queue_id];
> +
>  	vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
>  	vb_hdr_addr = vb_addr;
>  
> @@ -485,6 +489,9 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
>  	}
>  
>  	vq = dev->virtqueue[queue_id];
> +	if (unlikely(vq->enabled == 0))
> +		return 0;
> +
>  	count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
>  
>  	if (count == 0)
> @@ -583,6 +590,9 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
>  	}
>  
>  	vq = dev->virtqueue[queue_id];
> +	if (unlikely(vq->enabled == 0))
> +		return 0;
> +
>  	avail_idx =  *((volatile uint16_t *)&vq->avail->idx);
>  
>  	/* If there are no available buffers then return. */
> diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.c b/lib/librte_vhost/vhost_user/vhost-net-user.c
> index 8675cd4..f681676 100644
> --- a/lib/librte_vhost/vhost_user/vhost-net-user.c
> +++ b/lib/librte_vhost/vhost_user/vhost-net-user.c
> @@ -99,6 +99,7 @@ static const char *vhost_message_str[VHOST_USER_MAX] = {
>  	[VHOST_USER_GET_PROTOCOL_FEATURES]  = "VHOST_USER_GET_PROTOCOL_FEATURES",
>  	[VHOST_USER_SET_PROTOCOL_FEATURES]  = "VHOST_USER_SET_PROTOCOL_FEATURES",
>  	[VHOST_USER_GET_QUEUE_NUM]  = "VHOST_USER_GET_QUEUE_NUM",
> +	[VHOST_USER_SET_VRING_ENABLE]  = "VHOST_USER_SET_VRING_ENABLE",
>  };
>  
>  /**
> @@ -428,6 +429,10 @@ vserver_message_handler(int connfd, void *dat, int *remove)
>  		send_vhost_message(connfd, &msg);
>  		break;
>  
> +	case VHOST_USER_SET_VRING_ENABLE:
> +		user_set_vring_enable(ctx, &msg.payload.state);
> +		break;
> +
>  	default:
>  		break;
>  
> diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.h b/lib/librte_vhost/vhost_user/vhost-net-user.h
> index 389d21d..38637cc 100644
> --- a/lib/librte_vhost/vhost_user/vhost-net-user.h
> +++ b/lib/librte_vhost/vhost_user/vhost-net-user.h
> @@ -66,6 +66,7 @@ typedef enum VhostUserRequest {
>  	VHOST_USER_GET_PROTOCOL_FEATURES = 15,
>  	VHOST_USER_SET_PROTOCOL_FEATURES = 16,
>  	VHOST_USER_GET_QUEUE_NUM = 17,
> +	VHOST_USER_SET_VRING_ENABLE = 18,
>  	VHOST_USER_MAX
>  } VhostUserRequest;
>  
> diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
> index e83d279..9871f20 100644
> --- a/lib/librte_vhost/vhost_user/virtio-net-user.c
> +++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
> @@ -306,6 +306,28 @@ user_get_vring_base(struct vhost_device_ctx ctx,
>  	return 0;
>  }
>  
> +/*
> + * when virtio queues are ready to work, qemu will send us to
> + * enable the virtio queue pair.
> + */
> +int
> +user_set_vring_enable(struct vhost_device_ctx ctx,
> +		      struct vhost_vring_state *state)
> +{
> +	struct virtio_net *dev = get_device(ctx);
> +	uint32_t base_idx = state->index;
> +	int enabled = (int)state->num;
> +
> +	RTE_LOG(INFO, VHOST_CONFIG,
> +		"set queue enable: %d to qp idx: %d\n",
> +		enabled, state->index);
> +
> +	dev->virtqueue[base_idx + VIRTIO_RXQ]->enabled = enabled;
> +	dev->virtqueue[base_idx + VIRTIO_TXQ]->enabled = enabled;
> +
> +	return 0;
> +}
> +
>  void
>  user_destroy_device(struct vhost_device_ctx ctx)
>  {

It might be a good idea to flush any packets being processed
on relevant cores at this point.


> diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.h b/lib/librte_vhost/vhost_user/virtio-net-user.h
> index e7a6ff4..d46057e 100644
> --- a/lib/librte_vhost/vhost_user/virtio-net-user.h
> +++ b/lib/librte_vhost/vhost_user/virtio-net-user.h
> @@ -50,5 +50,8 @@ void user_set_protocol_features(struct vhost_device_ctx ctx,
>  
>  int user_get_vring_base(struct vhost_device_ctx, struct vhost_vring_state *);
>  
> +int user_set_vring_enable(struct vhost_device_ctx ctx,
> +			  struct vhost_vring_state *state);
> +
>  void user_destroy_device(struct vhost_device_ctx);
>  #endif
> diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
> index 643a92e..5fe1ad6 100644
> --- a/lib/librte_vhost/virtio-net.c
> +++ b/lib/librte_vhost/virtio-net.c
> @@ -254,7 +254,7 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
>  }
>  
>  static void
> -init_vring_queue(struct vhost_virtqueue *vq)
> +init_vring_queue(struct vhost_virtqueue *vq, int qp_idx)
>  {
>  	memset(vq, 0, sizeof(struct vhost_virtqueue));
>  
> @@ -263,13 +263,19 @@ init_vring_queue(struct vhost_virtqueue *vq)
>  
>  	/* Backends are set to -1 indicating an inactive device. */
>  	vq->backend = -1;
> +
> +	/* always set the default vq pair to enabled */
> +	if (qp_idx == 0)
> +		vq->enabled = 1;
>  }
>  
>  static void
>  init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
>  {
> -	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
> -	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
> +	uint32_t base_idx = qp_idx * VIRTIO_QNUM;
> +
> +	init_vring_queue(dev->virtqueue[base_idx + VIRTIO_RXQ], qp_idx);
> +	init_vring_queue(dev->virtqueue[base_idx + VIRTIO_TXQ], qp_idx);
>  }
>  
>  static int
> -- 
> 1.9.0

Re: [dpdk-dev] [PATCH v5 resend 00/12] vhost-user multiple queues enabling

[Marcel Apfelbaum]

On 09/18/2015 06:10 PM, Yuanhan Liu wrote:
> This patch set enables vhost-user multiple queues.

It seems the series does not apply on master, did you use a different branch or tag?

Thanks,
Marcel

>
> Overview
> ========
>
> It depends on some QEMU patches that, hopefully, will be merged soon.
> Those qemu patches introduce some new vhost-user messages, for vhost-user
> mq enabling negotiation. Here is the main negotiation steps (Qemu
> as master, and DPDK vhost-user as slave):
>
> - Master queries features by VHOST_USER_GET_FEATURES from slave
>
> - Check if VHOST_USER_F_PROTOCOL_FEATURES exist. If not, mq is not
>    supported. (check patch 1 for why VHOST_USER_F_PROTOCOL_FEATURES
>    is introduced)
>
> - Master then sends another command, VHOST_USER_GET_QUEUE_NUM, for
>    querying how many queues the slave supports.
>
>    Master will compare the result with the requested queue number.
>    Qemu exits if the former is smaller.
>
> - Master then tries to initiate all queue pairs by sending some vhost
>    user commands, including VHOST_USER_SET_VRING_CALL, which will
>    trigger the slave to do related vring setup, such as vring allocation.
>
>
> Till now, all necessary initiation and negotiation are done. And master
> could send another message, VHOST_USER_SET_VRING_ENABLE, to enable/disable
> a specific queue dynamically later.
>
>
> Patchset
> ========
>
> Patch 1-7 are all prepare works for enabling mq; they are all atomic
> changes, which is designed to not break anything.
>
> Patch 8 acutally enables mq feature, by setting two key feature flags.
>
> Patch 9-12 are for demostrating the mq feature.
>
>
> Testing
> =======
>
> Host side
> ----------
>
> - # Start vhost-switch
>
>    sudo mount -t hugetlbfs nodev /mnt/huge
>    sudo modprobe uio
>    sudo insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
>
>    sudo $RTE_SDK/tools/dpdk_nic_bind.py --bind igb_uio 0000:08:00.0
>
>    sudo $RTE_SDK/examples/vhost/build/vhost-switch -c 0xf0 -n 4     \
>         --huge-dir /mnt/huge --socket-mem 2048,0 -- -p 1 --vm2vm 0  \
>         --dev-basename usvhost --rxq 2
>
>    # Above common generates a usvhost socket file at PWD. You could also
>    # specify "--stats 1" option to enable stats dumping.
>
>
>
> - # start qemu
>
>
>    sudo sudo mount -t hugetlbfs nodev $HOME/hugetlbfs
>    $QEMU_DIR/x86_64-softmmu/qemu-system-x86_64 -machine accel=kvm -m 4G \
>          -object memory-backend-file,id=mem,size=4G,mem-path=$HOME/hugetlbfs,share=on \
> 	-numa node,memdev=mem -chardev socket,id=chr0,path=/path/to/usvhost \
> 	-netdev vhost-user,id=net0,chardev=chr0,vhostforce,queues=2     \
> 	-device virtio-net-pci,netdev=net0,mq=on,vectors=6,mac=52:54:00:12:34:58,csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off \
> 	-hda $HOME/iso/fc-22-x86_64.img -smp 10 -cpu core2duo,+sse3,+sse4.1,+sse4.2
>
>
> Guest side
> ----------
>
>     modprobe uio
>     insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
>     echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
>     ./tools/dpdk_nic_bind.py --bind igb_uio 00:03.0
>
>     $RTE_SDK/$RTE_TARGET/app/testpmd -c 1f -n 4 -- --rxq=2 --txq=2 \
>          --nb-cores=4 -i --disable-hw-vlan --txqflags 0xf00
>
>     > set fwd mac
>     > start tx_first
>
>
> After those setups, you then could use packet generator for packet tx/rx testing.
>
> ---
> Changchun Ouyang (7):
>    vhost: rxtx: prepare work for multiple queue support
>    vhost: add VHOST_USER_SET_VRING_ENABLE message
>    virtio: resolve for control queue
>    vhost: add API bind a virtq to a specific core
>    ixgbe: support VMDq RSS in non-SRIOV environment
>    examples/vhost: demonstrate the usage of vhost mq feature
>    examples/vhost: add per queue stats
>
> Yuanhan Liu (5):
>    vhost-user: add protocol features support
>    vhost-user: add VHOST_USER_GET_QUEUE_NUM message
>    vhost: vring queue setup for multiple queue support
>    vhost-user: handle VHOST_USER_RESET_OWNER correctly
>    vhost-user: enable vhost-user multiple queue
>
>   drivers/net/ixgbe/ixgbe_rxtx.c                |  86 +++++-
>   drivers/net/virtio/virtio_ethdev.c            |  12 +-
>   examples/vhost/main.c                         | 420 +++++++++++++++++---------
>   examples/vhost/main.h                         |   3 +-
>   lib/librte_ether/rte_ethdev.c                 |  11 +
>   lib/librte_vhost/rte_vhost_version.map        |   7 +
>   lib/librte_vhost/rte_virtio_net.h             |  30 +-
>   lib/librte_vhost/vhost_rxtx.c                 |  56 +++-
>   lib/librte_vhost/vhost_user/vhost-net-user.c  |  27 +-
>   lib/librte_vhost/vhost_user/vhost-net-user.h  |   4 +
>   lib/librte_vhost/vhost_user/virtio-net-user.c |  79 +++--
>   lib/librte_vhost/vhost_user/virtio-net-user.h |  10 +
>   lib/librte_vhost/virtio-net.c                 | 158 +++++++---
>   13 files changed, 659 insertions(+), 244 deletions(-)
>

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Marcel Apfelbaum]

On 09/18/2015 06:10 PM, Yuanhan Liu wrote:
> All queue pairs, including the default (the first) queue pair,
> are allocated dynamically, when a vring_call message is received
> first time for a specific queue pair.
>
> This is a refactor work for enabling vhost-user multiple queue;
> it should not break anything as it does no functional changes:
> we don't support mq set, so there is only one mq at max.
>
> This patch is based on Changchun's patch.
>
> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> ---
>   lib/librte_vhost/rte_virtio_net.h             |   3 +-
>   lib/librte_vhost/vhost_user/virtio-net-user.c |  44 +++++-----
>   lib/librte_vhost/virtio-net.c                 | 121 ++++++++++++++++----------
>   3 files changed, 102 insertions(+), 66 deletions(-)
>
> diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
> index e3a21e5..5dd6493 100644
> --- a/lib/librte_vhost/rte_virtio_net.h
> +++ b/lib/librte_vhost/rte_virtio_net.h
> @@ -96,7 +96,7 @@ struct vhost_virtqueue {
>    * Device structure contains all configuration information relating to the device.
>    */
>   struct virtio_net {
> -	struct vhost_virtqueue	*virtqueue[VIRTIO_QNUM];	/**< Contains all virtqueue information. */
> +	struct vhost_virtqueue	*virtqueue[VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX];	/**< Contains all virtqueue information. */
>   	struct virtio_memory	*mem;		/**< QEMU memory and memory region information. */
>   	uint64_t		features;	/**< Negotiated feature set. */
>   	uint64_t		protocol_features;	/**< Negotiated protocol feature set. */
> @@ -104,6 +104,7 @@ struct virtio_net {
>   	uint32_t		flags;		/**< Device flags. Only used to check if device is running on data core. */
>   #define IF_NAME_SZ (PATH_MAX > IFNAMSIZ ? PATH_MAX : IFNAMSIZ)
>   	char			ifname[IF_NAME_SZ];	/**< Name of the tap device or socket path. */
> +	uint32_t		virt_qp_nb;	/**< number of queue pair we have allocated */
>   	void			*priv;		/**< private context */
>   } __rte_cache_aligned;
>
> diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
> index 360254e..e83d279 100644
> --- a/lib/librte_vhost/vhost_user/virtio-net-user.c
> +++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
> @@ -206,25 +206,33 @@ err_mmap:
>   }
>

Hi,

>   static int
> +vq_is_ready(struct vhost_virtqueue *vq)
> +{
> +	return vq && vq->desc   &&
> +	       vq->kickfd != -1 &&
> +	       vq->callfd != -1;

  kickfd and callfd are unsigned

> +}
> +
> +static int
>   virtio_is_ready(struct virtio_net *dev)
>   {
>   	struct vhost_virtqueue *rvq, *tvq;
> +	uint32_t i;
>
> -	/* mq support in future.*/
> -	rvq = dev->virtqueue[VIRTIO_RXQ];
> -	tvq = dev->virtqueue[VIRTIO_TXQ];
> -	if (rvq && tvq && rvq->desc && tvq->desc &&
> -		(rvq->kickfd != -1) &&
> -		(rvq->callfd != -1) &&
> -		(tvq->kickfd != -1) &&
> -		(tvq->callfd != -1)) {
> -		RTE_LOG(INFO, VHOST_CONFIG,
> -			"virtio is now ready for processing.\n");
> -		return 1;
> +	for (i = 0; i < dev->virt_qp_nb; i++) {
> +		rvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ];
> +		tvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ];
> +
> +		if (!vq_is_ready(rvq) || !vq_is_ready(tvq)) {
> +			RTE_LOG(INFO, VHOST_CONFIG,
> +				"virtio is not ready for processing.\n");
> +			return 0;
> +		}
>   	}
> +
>   	RTE_LOG(INFO, VHOST_CONFIG,
> -		"virtio isn't ready for processing.\n");
> -	return 0;
> +		"virtio is now ready for processing.\n");
> +	return 1;
>   }
>
>   void
> @@ -290,13 +298,9 @@ user_get_vring_base(struct vhost_device_ctx ctx,
>   	 * sent and only sent in vhost_vring_stop.
>   	 * TODO: cleanup the vring, it isn't usable since here.
>   	 */
> -	if ((dev->virtqueue[VIRTIO_RXQ]->kickfd) >= 0) {
> -		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> -		dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> -	}
> -	if ((dev->virtqueue[VIRTIO_TXQ]->kickfd) >= 0) {
> -		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> -		dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> +	if ((dev->virtqueue[state->index]->kickfd) >= 0) {

always >= 0

> +		close(dev->virtqueue[state->index]->kickfd);
> +		dev->virtqueue[state->index]->kickfd = -1;

again unsigned

>   	}
>
>   	return 0;
> diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
> index deac6b9..643a92e 100644
> --- a/lib/librte_vhost/virtio-net.c
> +++ b/lib/librte_vhost/virtio-net.c
> @@ -36,6 +36,7 @@
>   #include <stddef.h>
>   #include <stdint.h>
>   #include <stdlib.h>
> +#include <assert.h>
>   #include <sys/mman.h>
>   #include <unistd.h>
>   #ifdef RTE_LIBRTE_VHOST_NUMA
> @@ -178,6 +179,15 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
>
>   }
>
> +static void
> +cleanup_vq(struct vhost_virtqueue *vq)
> +{
> +	if (vq->callfd >= 0)
> +		close(vq->callfd);
> +	if (vq->kickfd >= 0)
> +		close(vq->kickfd);

both always >=0

> +}
> +
>   /*
>    * Unmap any memory, close any file descriptors and
>    * free any memory owned by a device.
> @@ -185,6 +195,8 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
>   static void
>   cleanup_device(struct virtio_net *dev)
>   {
> +	uint32_t i;
> +
>   	/* Unmap QEMU memory file if mapped. */
>   	if (dev->mem) {
>   		munmap((void *)(uintptr_t)dev->mem->mapped_address,
> @@ -192,15 +204,10 @@ cleanup_device(struct virtio_net *dev)
>   		free(dev->mem);
>   	}
>
> -	/* Close any event notifiers opened by device. */
> -	if (dev->virtqueue[VIRTIO_RXQ]->callfd >= 0)
> -		close(dev->virtqueue[VIRTIO_RXQ]->callfd);
> -	if (dev->virtqueue[VIRTIO_RXQ]->kickfd >= 0)
> -		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> -	if (dev->virtqueue[VIRTIO_TXQ]->callfd >= 0)
> -		close(dev->virtqueue[VIRTIO_TXQ]->callfd);
> -	if (dev->virtqueue[VIRTIO_TXQ]->kickfd >= 0)
> -		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> +	for (i = 0; i < dev->virt_qp_nb; i++) {
> +		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ]);
> +		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ]);
> +	}
>   }
>
>   /*
> @@ -209,9 +216,11 @@ cleanup_device(struct virtio_net *dev)
>   static void
>   free_device(struct virtio_net_config_ll *ll_dev)
>   {
> -	/* Free any malloc'd memory */
> -	rte_free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
> -	rte_free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
> +	uint32_t i;
> +
> +	for (i = 0; i < ll_dev->dev.virt_qp_nb; i++)
> +		rte_free(ll_dev->dev.virtqueue[i * VIRTIO_QNUM]);
> +
>   	rte_free(ll_dev);
>   }
>
> @@ -244,6 +253,50 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
>   	}
>   }
>
> +static void
> +init_vring_queue(struct vhost_virtqueue *vq)
> +{
> +	memset(vq, 0, sizeof(struct vhost_virtqueue));
> +
> +	vq->kickfd = -1;
> +	vq->callfd = -1;

same here

> +
> +	/* Backends are set to -1 indicating an inactive device. */
> +	vq->backend = -1;
> +}
> +
> +static void
> +init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> +{
> +	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
> +	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
> +}
> +
> +static int
> +alloc_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> +{
> +	struct vhost_virtqueue *virtqueue = NULL;
> +	uint32_t virt_rx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_RXQ;
> +	uint32_t virt_tx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_TXQ;
> +
> +	virtqueue = rte_malloc(NULL,
> +			       sizeof(struct vhost_virtqueue) * VIRTIO_QNUM, 0);
> +	if (virtqueue == NULL) {
> +		RTE_LOG(ERR, VHOST_CONFIG,
> +			"Failed to allocate memory for virt qp:%d.\n", qp_idx);
> +		return -1;
> +	}
> +
> +	dev->virtqueue[virt_rx_q_idx] = virtqueue;
> +	dev->virtqueue[virt_tx_q_idx] = virtqueue + VIRTIO_TXQ;
> +
> +	init_vring_queue_pair(dev, qp_idx);
> +
> +	dev->virt_qp_nb += 1;
> +
> +	return 0;
> +}
> +
>   /*
>    *  Initialise all variables in device structure.
>    */
> @@ -251,6 +304,7 @@ static void
>   init_device(struct virtio_net *dev)
>   {
>   	uint64_t vq_offset;
> +	uint32_t i;
>
>   	/*
>   	 * Virtqueues have already been malloced so
> @@ -261,17 +315,9 @@ init_device(struct virtio_net *dev)
>   	/* Set everything to 0. */
>   	memset((void *)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
>   		(sizeof(struct virtio_net) - (size_t)vq_offset));
> -	memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
> -	memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
>
> -	dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> -	dev->virtqueue[VIRTIO_RXQ]->callfd = -1;
> -	dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> -	dev->virtqueue[VIRTIO_TXQ]->callfd = -1;
> -
> -	/* Backends are set to -1 indicating an inactive device. */
> -	dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
> -	dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
> +	for (i = 0; i < dev->virt_qp_nb; i++)
> +		init_vring_queue_pair(dev, i);
>   }
>
>   /*
> @@ -283,7 +329,6 @@ static int
>   new_device(struct vhost_device_ctx ctx)
>   {
>   	struct virtio_net_config_ll *new_ll_dev;
> -	struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
>
>   	/* Setup device and virtqueues. */
>   	new_ll_dev = rte_malloc(NULL, sizeof(struct virtio_net_config_ll), 0);
> @@ -294,28 +339,6 @@ new_device(struct vhost_device_ctx ctx)
>   		return -1;
>   	}
>
> -	virtqueue_rx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> -	if (virtqueue_rx == NULL) {
> -		rte_free(new_ll_dev);
> -		RTE_LOG(ERR, VHOST_CONFIG,
> -			"(%"PRIu64") Failed to allocate memory for rxq.\n",
> -			ctx.fh);
> -		return -1;
> -	}
> -
> -	virtqueue_tx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> -	if (virtqueue_tx == NULL) {
> -		rte_free(virtqueue_rx);
> -		rte_free(new_ll_dev);
> -		RTE_LOG(ERR, VHOST_CONFIG,
> -			"(%"PRIu64") Failed to allocate memory for txq.\n",
> -			ctx.fh);
> -		return -1;
> -	}
> -
> -	new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
> -	new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
> -
>   	/* Initialise device and virtqueues. */
>   	init_device(&new_ll_dev->dev);
>
> @@ -680,13 +703,21 @@ set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
>   {
>   	struct virtio_net *dev;
>   	struct vhost_virtqueue *vq;
> +	uint32_t cur_qp_idx = file->index / VIRTIO_QNUM;
>
>   	dev = get_device(ctx);
>   	if (dev == NULL)
>   		return -1;
>
> +	/* alloc vring queue pair if it is a new queue pair */
> +	if (cur_qp_idx + 1 > dev->virt_qp_nb) {
> +		if (alloc_vring_queue_pair(dev, cur_qp_idx) < 0)
> +			return -1;
> +	}
> +
>   	/* file->index refers to the queue index. The txq is 1, rxq is 0. */
>   	vq = dev->virtqueue[file->index];
> +	assert(vq != NULL);
>
>   	if (vq->callfd >= 0)
>   		close(vq->callfd);
>


I hope I helped,
Thanks,
Marcel

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Yuanhan Liu]

On Sun, Sep 20, 2015 at 04:58:42PM +0300, Marcel Apfelbaum wrote:
> On 09/18/2015 06:10 PM, Yuanhan Liu wrote:
> >All queue pairs, including the default (the first) queue pair,
> >are allocated dynamically, when a vring_call message is received
> >first time for a specific queue pair.
> >
> >This is a refactor work for enabling vhost-user multiple queue;
> >it should not break anything as it does no functional changes:
> >we don't support mq set, so there is only one mq at max.
> >
> >This patch is based on Changchun's patch.
> >
> >Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> >---
> >  lib/librte_vhost/rte_virtio_net.h             |   3 +-
> >  lib/librte_vhost/vhost_user/virtio-net-user.c |  44 +++++-----
> >  lib/librte_vhost/virtio-net.c                 | 121 ++++++++++++++++----------
> >  3 files changed, 102 insertions(+), 66 deletions(-)
> >
> >diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
> >index e3a21e5..5dd6493 100644
> >--- a/lib/librte_vhost/rte_virtio_net.h
> >+++ b/lib/librte_vhost/rte_virtio_net.h
> >@@ -96,7 +96,7 @@ struct vhost_virtqueue {
> >   * Device structure contains all configuration information relating to the device.
> >   */
> >  struct virtio_net {
> >-	struct vhost_virtqueue	*virtqueue[VIRTIO_QNUM];	/**< Contains all virtqueue information. */
> >+	struct vhost_virtqueue	*virtqueue[VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX];	/**< Contains all virtqueue information. */
> >  	struct virtio_memory	*mem;		/**< QEMU memory and memory region information. */
> >  	uint64_t		features;	/**< Negotiated feature set. */
> >  	uint64_t		protocol_features;	/**< Negotiated protocol feature set. */
> >@@ -104,6 +104,7 @@ struct virtio_net {
> >  	uint32_t		flags;		/**< Device flags. Only used to check if device is running on data core. */
> >  #define IF_NAME_SZ (PATH_MAX > IFNAMSIZ ? PATH_MAX : IFNAMSIZ)
> >  	char			ifname[IF_NAME_SZ];	/**< Name of the tap device or socket path. */
> >+	uint32_t		virt_qp_nb;	/**< number of queue pair we have allocated */
> >  	void			*priv;		/**< private context */
> >  } __rte_cache_aligned;
> >
> >diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
> >index 360254e..e83d279 100644
> >--- a/lib/librte_vhost/vhost_user/virtio-net-user.c
> >+++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
> >@@ -206,25 +206,33 @@ err_mmap:
> >  }
> >
> 
> Hi,
> 
> >  static int
> >+vq_is_ready(struct vhost_virtqueue *vq)
> >+{
> >+	return vq && vq->desc   &&
> >+	       vq->kickfd != -1 &&
> >+	       vq->callfd != -1;
> 
>  kickfd and callfd are unsigned

Hi,

I have made 4 cleanup patches few weeks before, including the patch
to define kickfd and callfd as int type, and they have already got
the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
they will be merged, hence I made this patchset based on them.

This will also answer the question from your another email: can't
apply.

Sorry for not pointing it out, as I assume Thomas(cc'ed) will apply
them soon. And thanks for the review, anyway.

	--yliu
> 
> >+}
> >+
> >+static int
> >  virtio_is_ready(struct virtio_net *dev)
> >  {
> >  	struct vhost_virtqueue *rvq, *tvq;
> >+	uint32_t i;
> >
> >-	/* mq support in future.*/
> >-	rvq = dev->virtqueue[VIRTIO_RXQ];
> >-	tvq = dev->virtqueue[VIRTIO_TXQ];
> >-	if (rvq && tvq && rvq->desc && tvq->desc &&
> >-		(rvq->kickfd != -1) &&
> >-		(rvq->callfd != -1) &&
> >-		(tvq->kickfd != -1) &&
> >-		(tvq->callfd != -1)) {
> >-		RTE_LOG(INFO, VHOST_CONFIG,
> >-			"virtio is now ready for processing.\n");
> >-		return 1;
> >+	for (i = 0; i < dev->virt_qp_nb; i++) {
> >+		rvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ];
> >+		tvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ];
> >+
> >+		if (!vq_is_ready(rvq) || !vq_is_ready(tvq)) {
> >+			RTE_LOG(INFO, VHOST_CONFIG,
> >+				"virtio is not ready for processing.\n");
> >+			return 0;
> >+		}
> >  	}
> >+
> >  	RTE_LOG(INFO, VHOST_CONFIG,
> >-		"virtio isn't ready for processing.\n");
> >-	return 0;
> >+		"virtio is now ready for processing.\n");
> >+	return 1;
> >  }
> >
> >  void
> >@@ -290,13 +298,9 @@ user_get_vring_base(struct vhost_device_ctx ctx,
> >  	 * sent and only sent in vhost_vring_stop.
> >  	 * TODO: cleanup the vring, it isn't usable since here.
> >  	 */
> >-	if ((dev->virtqueue[VIRTIO_RXQ]->kickfd) >= 0) {
> >-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> >-		dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> >-	}
> >-	if ((dev->virtqueue[VIRTIO_TXQ]->kickfd) >= 0) {
> >-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> >-		dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> >+	if ((dev->virtqueue[state->index]->kickfd) >= 0) {
> 
> always >= 0
> 
> >+		close(dev->virtqueue[state->index]->kickfd);
> >+		dev->virtqueue[state->index]->kickfd = -1;
> 
> again unsigned
> 
> >  	}
> >
> >  	return 0;
> >diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
> >index deac6b9..643a92e 100644
> >--- a/lib/librte_vhost/virtio-net.c
> >+++ b/lib/librte_vhost/virtio-net.c
> >@@ -36,6 +36,7 @@
> >  #include <stddef.h>
> >  #include <stdint.h>
> >  #include <stdlib.h>
> >+#include <assert.h>
> >  #include <sys/mman.h>
> >  #include <unistd.h>
> >  #ifdef RTE_LIBRTE_VHOST_NUMA
> >@@ -178,6 +179,15 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
> >
> >  }
> >
> >+static void
> >+cleanup_vq(struct vhost_virtqueue *vq)
> >+{
> >+	if (vq->callfd >= 0)
> >+		close(vq->callfd);
> >+	if (vq->kickfd >= 0)
> >+		close(vq->kickfd);
> 
> both always >=0
> 
> >+}
> >+
> >  /*
> >   * Unmap any memory, close any file descriptors and
> >   * free any memory owned by a device.
> >@@ -185,6 +195,8 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
> >  static void
> >  cleanup_device(struct virtio_net *dev)
> >  {
> >+	uint32_t i;
> >+
> >  	/* Unmap QEMU memory file if mapped. */
> >  	if (dev->mem) {
> >  		munmap((void *)(uintptr_t)dev->mem->mapped_address,
> >@@ -192,15 +204,10 @@ cleanup_device(struct virtio_net *dev)
> >  		free(dev->mem);
> >  	}
> >
> >-	/* Close any event notifiers opened by device. */
> >-	if (dev->virtqueue[VIRTIO_RXQ]->callfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_RXQ]->callfd);
> >-	if (dev->virtqueue[VIRTIO_RXQ]->kickfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> >-	if (dev->virtqueue[VIRTIO_TXQ]->callfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_TXQ]->callfd);
> >-	if (dev->virtqueue[VIRTIO_TXQ]->kickfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> >+	for (i = 0; i < dev->virt_qp_nb; i++) {
> >+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ]);
> >+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ]);
> >+	}
> >  }
> >
> >  /*
> >@@ -209,9 +216,11 @@ cleanup_device(struct virtio_net *dev)
> >  static void
> >  free_device(struct virtio_net_config_ll *ll_dev)
> >  {
> >-	/* Free any malloc'd memory */
> >-	rte_free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
> >-	rte_free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
> >+	uint32_t i;
> >+
> >+	for (i = 0; i < ll_dev->dev.virt_qp_nb; i++)
> >+		rte_free(ll_dev->dev.virtqueue[i * VIRTIO_QNUM]);
> >+
> >  	rte_free(ll_dev);
> >  }
> >
> >@@ -244,6 +253,50 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
> >  	}
> >  }
> >
> >+static void
> >+init_vring_queue(struct vhost_virtqueue *vq)
> >+{
> >+	memset(vq, 0, sizeof(struct vhost_virtqueue));
> >+
> >+	vq->kickfd = -1;
> >+	vq->callfd = -1;
> 
> same here
> 
> >+
> >+	/* Backends are set to -1 indicating an inactive device. */
> >+	vq->backend = -1;
> >+}
> >+
> >+static void
> >+init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> >+{
> >+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
> >+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
> >+}
> >+
> >+static int
> >+alloc_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> >+{
> >+	struct vhost_virtqueue *virtqueue = NULL;
> >+	uint32_t virt_rx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_RXQ;
> >+	uint32_t virt_tx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_TXQ;
> >+
> >+	virtqueue = rte_malloc(NULL,
> >+			       sizeof(struct vhost_virtqueue) * VIRTIO_QNUM, 0);
> >+	if (virtqueue == NULL) {
> >+		RTE_LOG(ERR, VHOST_CONFIG,
> >+			"Failed to allocate memory for virt qp:%d.\n", qp_idx);
> >+		return -1;
> >+	}
> >+
> >+	dev->virtqueue[virt_rx_q_idx] = virtqueue;
> >+	dev->virtqueue[virt_tx_q_idx] = virtqueue + VIRTIO_TXQ;
> >+
> >+	init_vring_queue_pair(dev, qp_idx);
> >+
> >+	dev->virt_qp_nb += 1;
> >+
> >+	return 0;
> >+}
> >+
> >  /*
> >   *  Initialise all variables in device structure.
> >   */
> >@@ -251,6 +304,7 @@ static void
> >  init_device(struct virtio_net *dev)
> >  {
> >  	uint64_t vq_offset;
> >+	uint32_t i;
> >
> >  	/*
> >  	 * Virtqueues have already been malloced so
> >@@ -261,17 +315,9 @@ init_device(struct virtio_net *dev)
> >  	/* Set everything to 0. */
> >  	memset((void *)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
> >  		(sizeof(struct virtio_net) - (size_t)vq_offset));
> >-	memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
> >-	memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
> >
> >-	dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> >-	dev->virtqueue[VIRTIO_RXQ]->callfd = -1;
> >-	dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> >-	dev->virtqueue[VIRTIO_TXQ]->callfd = -1;
> >-
> >-	/* Backends are set to -1 indicating an inactive device. */
> >-	dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
> >-	dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
> >+	for (i = 0; i < dev->virt_qp_nb; i++)
> >+		init_vring_queue_pair(dev, i);
> >  }
> >
> >  /*
> >@@ -283,7 +329,6 @@ static int
> >  new_device(struct vhost_device_ctx ctx)
> >  {
> >  	struct virtio_net_config_ll *new_ll_dev;
> >-	struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
> >
> >  	/* Setup device and virtqueues. */
> >  	new_ll_dev = rte_malloc(NULL, sizeof(struct virtio_net_config_ll), 0);
> >@@ -294,28 +339,6 @@ new_device(struct vhost_device_ctx ctx)
> >  		return -1;
> >  	}
> >
> >-	virtqueue_rx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> >-	if (virtqueue_rx == NULL) {
> >-		rte_free(new_ll_dev);
> >-		RTE_LOG(ERR, VHOST_CONFIG,
> >-			"(%"PRIu64") Failed to allocate memory for rxq.\n",
> >-			ctx.fh);
> >-		return -1;
> >-	}
> >-
> >-	virtqueue_tx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> >-	if (virtqueue_tx == NULL) {
> >-		rte_free(virtqueue_rx);
> >-		rte_free(new_ll_dev);
> >-		RTE_LOG(ERR, VHOST_CONFIG,
> >-			"(%"PRIu64") Failed to allocate memory for txq.\n",
> >-			ctx.fh);
> >-		return -1;
> >-	}
> >-
> >-	new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
> >-	new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
> >-
> >  	/* Initialise device and virtqueues. */
> >  	init_device(&new_ll_dev->dev);
> >
> >@@ -680,13 +703,21 @@ set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
> >  {
> >  	struct virtio_net *dev;
> >  	struct vhost_virtqueue *vq;
> >+	uint32_t cur_qp_idx = file->index / VIRTIO_QNUM;
> >
> >  	dev = get_device(ctx);
> >  	if (dev == NULL)
> >  		return -1;
> >
> >+	/* alloc vring queue pair if it is a new queue pair */
> >+	if (cur_qp_idx + 1 > dev->virt_qp_nb) {
> >+		if (alloc_vring_queue_pair(dev, cur_qp_idx) < 0)
> >+			return -1;
> >+	}
> >+
> >  	/* file->index refers to the queue index. The txq is 1, rxq is 0. */
> >  	vq = dev->virtqueue[file->index];
> >+	assert(vq != NULL);
> >
> >  	if (vq->callfd >= 0)
> >  		close(vq->callfd);
> >
> 
> 
> I hope I helped,
> Thanks,
> Marcel
> 

Re: [dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message

[Yuanhan Liu]

On Sun, Sep 20, 2015 at 12:37:35PM +0300, Michael S. Tsirkin wrote:
> On Fri, Sep 18, 2015 at 11:10:54PM +0800, Yuanhan Liu wrote:
> > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > 
> > This message is used to enable/disable a specific vring queue pair.
> > The first queue pair is enabled by default.
> > 
> > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> > ---
[snip...]
> >  void
> >  user_destroy_device(struct vhost_device_ctx ctx)
> >  {
> 
> It might be a good idea to flush any packets being processed
> on relevant cores at this point.

They are offloaded to the application (examples/vhost/vhost-switch in
this case).

user_destroy_device will invoke the application's "destroy_device()"
callback in the end, which, in our case, will set "remove" flag. The
core worker will then drain and free the RX queue and free TX queue
once the "remove" flag is set.

	--yliu

Re: [dpdk-dev] [PATCH v5 resend 04/12] vhost: rxtx: prepare work for multiple queue support

[Yuanhan Liu]

On Sun, Sep 20, 2015 at 12:29:17PM +0300, Michael S. Tsirkin wrote:
> On Fri, Sep 18, 2015 at 11:10:53PM +0800, Yuanhan Liu wrote:
> > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > 
> > Do not use VIRTIO_RXQ or VIRTIO_TXQ anymore; use the queue_id,
> > instead, which will be set to a proper value for a specific queue
> > when we have multiple queue support enabled.
> > 
> > For now, queue_id is still set with VIRTIO_RXQ or VIRTIO_TXQ,
> > so it should not break anything.
> > 
> > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> 
> What I'm missing is the logic that tracks which tx vq
> did a specific flow use, to send traffic back on the correct
> rx vq.
> 
> Is this something added by one of the follow-up patches?

Yeah, and also, they are offloaded to the application (examples/
vhost/vhost-switch): patch 11 does the job.

	--yliu
> 
> 
> > ---
> >  lib/librte_vhost/vhost_rxtx.c | 46 ++++++++++++++++++++++++++++++-------------
> >  1 file changed, 32 insertions(+), 14 deletions(-)
> > 
> > diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> > index b2b2bcc..a4ab6ca 100644
> > --- a/lib/librte_vhost/vhost_rxtx.c
> > +++ b/lib/librte_vhost/vhost_rxtx.c
> > @@ -42,6 +42,16 @@
> >  
> >  #define MAX_PKT_BURST 32
> >  
> > +static inline int __attribute__((always_inline))
> > +is_valid_virt_queue_idx(uint32_t virtq_idx, int is_tx, uint32_t max_qp_idx)
> > +{
> > +	if ((is_tx ^ (virtq_idx & 0x1)) ||
> > +	    (virtq_idx >= max_qp_idx * VIRTIO_QNUM))
> > +		return 0;
> > +
> > +	return 1;
> > +}
> > +
> >  /**
> >   * This function adds buffers to the virtio devices RX virtqueue. Buffers can
> >   * be received from the physical port or from another virtio device. A packet
> > @@ -68,12 +78,14 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
> >  	uint8_t success = 0;
> >  
> >  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
> > -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> > +		RTE_LOG(ERR, VHOST_DATA,
> > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > +			__func__, dev->device_fh, queue_id);
> >  		return 0;
> >  	}
> >  
> > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > +	vq = dev->virtqueue[queue_id];
> >  	count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
> >  
> >  	/*
> > @@ -235,8 +247,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
> >  }
> >  
> >  static inline uint32_t __attribute__((always_inline))
> > -copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
> > -	uint16_t res_end_idx, struct rte_mbuf *pkt)
> > +copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
> > +			uint16_t res_base_idx, uint16_t res_end_idx,
> > +			struct rte_mbuf *pkt)
> >  {
> >  	uint32_t vec_idx = 0;
> >  	uint32_t entry_success = 0;
> > @@ -264,7 +277,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
> >  	 * Convert from gpa to vva
> >  	 * (guest physical addr -> vhost virtual addr)
> >  	 */
> > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > +	vq = dev->virtqueue[queue_id];
> >  	vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
> >  	vb_hdr_addr = vb_addr;
> >  
> > @@ -464,11 +477,14 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
> >  
> >  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
> >  		dev->device_fh);
> > -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> > +		RTE_LOG(ERR, VHOST_DATA,
> > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > +			__func__, dev->device_fh, queue_id);
> > +		return 0;
> >  	}
> >  
> > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > +	vq = dev->virtqueue[queue_id];
> >  	count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
> >  
> >  	if (count == 0)
> > @@ -509,8 +525,8 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
> >  							res_cur_idx);
> >  		} while (success == 0);
> >  
> > -		entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
> > -			res_cur_idx, pkts[pkt_idx]);
> > +		entry_success = copy_from_mbuf_to_vring(dev, queue_id,
> > +			res_base_idx, res_cur_idx, pkts[pkt_idx]);
> >  
> >  		rte_compiler_barrier();
> >  
> > @@ -559,12 +575,14 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
> >  	uint16_t free_entries, entry_success = 0;
> >  	uint16_t avail_idx;
> >  
> > -	if (unlikely(queue_id != VIRTIO_TXQ)) {
> > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 1, dev->virt_qp_nb))) {
> > +		RTE_LOG(ERR, VHOST_DATA,
> > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > +			__func__, dev->device_fh, queue_id);
> >  		return 0;
> >  	}
> >  
> > -	vq = dev->virtqueue[VIRTIO_TXQ];
> > +	vq = dev->virtqueue[queue_id];
> >  	avail_idx =  *((volatile uint16_t *)&vq->avail->idx);
> >  
> >  	/* If there are no available buffers then return. */
> > -- 
> > 1.9.0

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Yuanhan Liu]

On Sun, Sep 20, 2015 at 12:21:14PM +0300, Michael S. Tsirkin wrote:
> On Fri, Sep 18, 2015 at 11:10:56PM +0800, Yuanhan Liu wrote:
> > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > 
> > Fix the max virtio queue pair read issue.
> > 
> > Control queue can't work for vhost-user mulitple queue mode,
> > so introduce a counter to void the dead loop when polling
> > the control queue.
> > 
> > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> 
> Per virtio spec, the multiqueue feature depends on control queue -
> what do you mean when you say it can't work?
> 
> > ---
> >  drivers/net/virtio/virtio_ethdev.c | 12 +++++++-----
> >  1 file changed, 7 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> > index 465d3cd..b2f4120 100644
> > --- a/drivers/net/virtio/virtio_ethdev.c
> > +++ b/drivers/net/virtio/virtio_ethdev.c
> > @@ -1162,7 +1162,6 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
> >  	struct virtio_hw *hw = eth_dev->data->dev_private;
> >  	struct virtio_net_config *config;
> >  	struct virtio_net_config local_config;
> > -	uint32_t offset_conf = sizeof(config->mac);
> >  	struct rte_pci_device *pci_dev;
> >  
> >  	RTE_BUILD_BUG_ON(RTE_PKTMBUF_HEADROOM < sizeof(struct virtio_net_hdr));
> > @@ -1222,7 +1221,9 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
> >  		config = &local_config;
> >  
> >  		if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) {
> > -			offset_conf += sizeof(config->status);
> > +			vtpci_read_dev_config(hw,
> > +				offsetof(struct virtio_net_config, status),
> > +				&config->status, sizeof(config->status));
> >  		} else {
> >  			PMD_INIT_LOG(DEBUG,
> >  				     "VIRTIO_NET_F_STATUS is not supported");
> > @@ -1230,15 +1231,16 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
> >  		}
> >  
> >  		if (vtpci_with_feature(hw, VIRTIO_NET_F_MQ)) {
> > -			offset_conf += sizeof(config->max_virtqueue_pairs);
> > +			vtpci_read_dev_config(hw,
> > +				offsetof(struct virtio_net_config, max_virtqueue_pairs),
> > +				&config->max_virtqueue_pairs,
> > +				sizeof(config->max_virtqueue_pairs));
> >  		} else {
> >  			PMD_INIT_LOG(DEBUG,
> >  				     "VIRTIO_NET_F_MQ is not supported");
> >  			config->max_virtqueue_pairs = 1;
> >  		}
> >  
> > -		vtpci_read_dev_config(hw, 0, (uint8_t *)config, offset_conf);
> > -
> >  		hw->max_rx_queues =
> >  			(VIRTIO_MAX_RX_QUEUES < config->max_virtqueue_pairs) ?
> >  			VIRTIO_MAX_RX_QUEUES : config->max_virtqueue_pairs;
> 
> 
> Does the patch actually do what the commit log says?

Sorry, the commit log is wrong as you said.

It was actually a bug in our code, which happens to be revealed when
MQ is enabled. The old code adjusts the config bytes we want to read
depending on what kind of features we have, but we later cast the
entire buf we read with "struct virtio_net_config", which is obviously
wrong.

The right way to go is to read related config bytes when corresponding
feature is set, which is exactly what this patch does.

> It seems tobe about reading the device confing,
> not breaking out of a loop ...

It's just a (bad) side effect of getting the vritio_net_config wrongly:
the wrong config causes a dead loop in our code.

And sorry for the buggy commit log, will fix it next version.

Thanks.

	--yliu

Re: [dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message

[Michael S. Tsirkin]

On Mon, Sep 21, 2015 at 10:22:52AM +0800, Yuanhan Liu wrote:
> On Sun, Sep 20, 2015 at 12:37:35PM +0300, Michael S. Tsirkin wrote:
> > On Fri, Sep 18, 2015 at 11:10:54PM +0800, Yuanhan Liu wrote:
> > > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > > 
> > > This message is used to enable/disable a specific vring queue pair.
> > > The first queue pair is enabled by default.
> > > 
> > > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> > > ---
> [snip...]
> > >  void
> > >  user_destroy_device(struct vhost_device_ctx ctx)
> > >  {
> > 
> > It might be a good idea to flush any packets being processed
> > on relevant cores at this point.
> 
> They are offloaded to the application (examples/vhost/vhost-switch in
> this case).
> 
> user_destroy_device will invoke the application's "destroy_device()"
> callback in the end, which, in our case, will set "remove" flag. The
> core worker will then drain and free the RX queue and free TX queue
> once the "remove" flag is set.
> 
> 	--yliu


Oh, I really meant user_set_vring_enable.
Sorry about the confusion.

-- 
MST

Re: [dpdk-dev] [PATCH v5 resend 04/12] vhost: rxtx: prepare work for multiple queue support

[Michael S. Tsirkin]

On Mon, Sep 21, 2015 at 10:25:18AM +0800, Yuanhan Liu wrote:
> On Sun, Sep 20, 2015 at 12:29:17PM +0300, Michael S. Tsirkin wrote:
> > On Fri, Sep 18, 2015 at 11:10:53PM +0800, Yuanhan Liu wrote:
> > > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > > 
> > > Do not use VIRTIO_RXQ or VIRTIO_TXQ anymore; use the queue_id,
> > > instead, which will be set to a proper value for a specific queue
> > > when we have multiple queue support enabled.
> > > 
> > > For now, queue_id is still set with VIRTIO_RXQ or VIRTIO_TXQ,
> > > so it should not break anything.
> > > 
> > > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> > 
> > What I'm missing is the logic that tracks which tx vq
> > did a specific flow use, to send traffic back on the correct
> > rx vq.
> > 
> > Is this something added by one of the follow-up patches?
> 
> Yeah, and also, they are offloaded to the application (examples/
> vhost/vhost-switch): patch 11 does the job.
> 
> 	--yliu

Couldn't find anything dealing with flows there ...
Could you be more specific pls?

> > 
> > 
> > > ---
> > >  lib/librte_vhost/vhost_rxtx.c | 46 ++++++++++++++++++++++++++++++-------------
> > >  1 file changed, 32 insertions(+), 14 deletions(-)
> > > 
> > > diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> > > index b2b2bcc..a4ab6ca 100644
> > > --- a/lib/librte_vhost/vhost_rxtx.c
> > > +++ b/lib/librte_vhost/vhost_rxtx.c
> > > @@ -42,6 +42,16 @@
> > >  
> > >  #define MAX_PKT_BURST 32
> > >  
> > > +static inline int __attribute__((always_inline))
> > > +is_valid_virt_queue_idx(uint32_t virtq_idx, int is_tx, uint32_t max_qp_idx)
> > > +{
> > > +	if ((is_tx ^ (virtq_idx & 0x1)) ||
> > > +	    (virtq_idx >= max_qp_idx * VIRTIO_QNUM))
> > > +		return 0;
> > > +
> > > +	return 1;
> > > +}
> > > +
> > >  /**
> > >   * This function adds buffers to the virtio devices RX virtqueue. Buffers can
> > >   * be received from the physical port or from another virtio device. A packet
> > > @@ -68,12 +78,14 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
> > >  	uint8_t success = 0;
> > >  
> > >  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
> > > -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> > > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> > > +		RTE_LOG(ERR, VHOST_DATA,
> > > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > > +			__func__, dev->device_fh, queue_id);
> > >  		return 0;
> > >  	}
> > >  
> > > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > > +	vq = dev->virtqueue[queue_id];
> > >  	count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
> > >  
> > >  	/*
> > > @@ -235,8 +247,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
> > >  }
> > >  
> > >  static inline uint32_t __attribute__((always_inline))
> > > -copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
> > > -	uint16_t res_end_idx, struct rte_mbuf *pkt)
> > > +copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
> > > +			uint16_t res_base_idx, uint16_t res_end_idx,
> > > +			struct rte_mbuf *pkt)
> > >  {
> > >  	uint32_t vec_idx = 0;
> > >  	uint32_t entry_success = 0;
> > > @@ -264,7 +277,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
> > >  	 * Convert from gpa to vva
> > >  	 * (guest physical addr -> vhost virtual addr)
> > >  	 */
> > > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > > +	vq = dev->virtqueue[queue_id];
> > >  	vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
> > >  	vb_hdr_addr = vb_addr;
> > >  
> > > @@ -464,11 +477,14 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
> > >  
> > >  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
> > >  		dev->device_fh);
> > > -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> > > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> > > +		RTE_LOG(ERR, VHOST_DATA,
> > > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > > +			__func__, dev->device_fh, queue_id);
> > > +		return 0;
> > >  	}
> > >  
> > > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > > +	vq = dev->virtqueue[queue_id];
> > >  	count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
> > >  
> > >  	if (count == 0)
> > > @@ -509,8 +525,8 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
> > >  							res_cur_idx);
> > >  		} while (success == 0);
> > >  
> > > -		entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
> > > -			res_cur_idx, pkts[pkt_idx]);
> > > +		entry_success = copy_from_mbuf_to_vring(dev, queue_id,
> > > +			res_base_idx, res_cur_idx, pkts[pkt_idx]);
> > >  
> > >  		rte_compiler_barrier();
> > >  
> > > @@ -559,12 +575,14 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
> > >  	uint16_t free_entries, entry_success = 0;
> > >  	uint16_t avail_idx;
> > >  
> > > -	if (unlikely(queue_id != VIRTIO_TXQ)) {
> > > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 1, dev->virt_qp_nb))) {
> > > +		RTE_LOG(ERR, VHOST_DATA,
> > > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > > +			__func__, dev->device_fh, queue_id);
> > >  		return 0;
> > >  	}
> > >  
> > > -	vq = dev->virtqueue[VIRTIO_TXQ];
> > > +	vq = dev->virtqueue[queue_id];
> > >  	avail_idx =  *((volatile uint16_t *)&vq->avail->idx);
> > >  
> > >  	/* If there are no available buffers then return. */
> > > -- 
> > > 1.9.0

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Michael S. Tsirkin]

On Sun, Sep 20, 2015 at 04:58:42PM +0300, Marcel Apfelbaum wrote:
> On 09/18/2015 06:10 PM, Yuanhan Liu wrote:
> >All queue pairs, including the default (the first) queue pair,
> >are allocated dynamically, when a vring_call message is received
> >first time for a specific queue pair.
> >
> >This is a refactor work for enabling vhost-user multiple queue;
> >it should not break anything as it does no functional changes:
> >we don't support mq set, so there is only one mq at max.
> >
> >This patch is based on Changchun's patch.
> >
> >Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> >---
> >  lib/librte_vhost/rte_virtio_net.h             |   3 +-
> >  lib/librte_vhost/vhost_user/virtio-net-user.c |  44 +++++-----
> >  lib/librte_vhost/virtio-net.c                 | 121 ++++++++++++++++----------
> >  3 files changed, 102 insertions(+), 66 deletions(-)
> >
> >diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
> >index e3a21e5..5dd6493 100644
> >--- a/lib/librte_vhost/rte_virtio_net.h
> >+++ b/lib/librte_vhost/rte_virtio_net.h
> >@@ -96,7 +96,7 @@ struct vhost_virtqueue {
> >   * Device structure contains all configuration information relating to the device.
> >   */
> >  struct virtio_net {
> >-	struct vhost_virtqueue	*virtqueue[VIRTIO_QNUM];	/**< Contains all virtqueue information. */
> >+	struct vhost_virtqueue	*virtqueue[VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX];	/**< Contains all virtqueue information. */
> >  	struct virtio_memory	*mem;		/**< QEMU memory and memory region information. */
> >  	uint64_t		features;	/**< Negotiated feature set. */
> >  	uint64_t		protocol_features;	/**< Negotiated protocol feature set. */
> >@@ -104,6 +104,7 @@ struct virtio_net {
> >  	uint32_t		flags;		/**< Device flags. Only used to check if device is running on data core. */
> >  #define IF_NAME_SZ (PATH_MAX > IFNAMSIZ ? PATH_MAX : IFNAMSIZ)
> >  	char			ifname[IF_NAME_SZ];	/**< Name of the tap device or socket path. */
> >+	uint32_t		virt_qp_nb;	/**< number of queue pair we have allocated */
> >  	void			*priv;		/**< private context */
> >  } __rte_cache_aligned;
> >
> >diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
> >index 360254e..e83d279 100644
> >--- a/lib/librte_vhost/vhost_user/virtio-net-user.c
> >+++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
> >@@ -206,25 +206,33 @@ err_mmap:
> >  }
> >
> 
> Hi,
> 
> >  static int
> >+vq_is_ready(struct vhost_virtqueue *vq)
> >+{
> >+	return vq && vq->desc   &&
> >+	       vq->kickfd != -1 &&
> >+	       vq->callfd != -1;
> 
>  kickfd and callfd are unsigned

That's probably a bug.
fds are signed, and -1 is what qemu uses to mean "nop".
This comparison will convert -1 to unsigned int so it'll work.
The >= ones below won't work.

I think fd types need to be fixed.


> >+}
> >+
> >+static int
> >  virtio_is_ready(struct virtio_net *dev)
> >  {
> >  	struct vhost_virtqueue *rvq, *tvq;
> >+	uint32_t i;
> >
> >-	/* mq support in future.*/
> >-	rvq = dev->virtqueue[VIRTIO_RXQ];
> >-	tvq = dev->virtqueue[VIRTIO_TXQ];
> >-	if (rvq && tvq && rvq->desc && tvq->desc &&
> >-		(rvq->kickfd != -1) &&
> >-		(rvq->callfd != -1) &&
> >-		(tvq->kickfd != -1) &&
> >-		(tvq->callfd != -1)) {
> >-		RTE_LOG(INFO, VHOST_CONFIG,
> >-			"virtio is now ready for processing.\n");
> >-		return 1;
> >+	for (i = 0; i < dev->virt_qp_nb; i++) {
> >+		rvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ];
> >+		tvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ];
> >+
> >+		if (!vq_is_ready(rvq) || !vq_is_ready(tvq)) {
> >+			RTE_LOG(INFO, VHOST_CONFIG,
> >+				"virtio is not ready for processing.\n");
> >+			return 0;
> >+		}
> >  	}
> >+
> >  	RTE_LOG(INFO, VHOST_CONFIG,
> >-		"virtio isn't ready for processing.\n");
> >-	return 0;
> >+		"virtio is now ready for processing.\n");
> >+	return 1;
> >  }
> >
> >  void
> >@@ -290,13 +298,9 @@ user_get_vring_base(struct vhost_device_ctx ctx,
> >  	 * sent and only sent in vhost_vring_stop.
> >  	 * TODO: cleanup the vring, it isn't usable since here.
> >  	 */
> >-	if ((dev->virtqueue[VIRTIO_RXQ]->kickfd) >= 0) {
> >-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> >-		dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> >-	}
> >-	if ((dev->virtqueue[VIRTIO_TXQ]->kickfd) >= 0) {
> >-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> >-		dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> >+	if ((dev->virtqueue[state->index]->kickfd) >= 0) {
> 
> always >= 0
> 
> >+		close(dev->virtqueue[state->index]->kickfd);
> >+		dev->virtqueue[state->index]->kickfd = -1;
> 
> again unsigned
> 
> >  	}
> >
> >  	return 0;
> >diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
> >index deac6b9..643a92e 100644
> >--- a/lib/librte_vhost/virtio-net.c
> >+++ b/lib/librte_vhost/virtio-net.c
> >@@ -36,6 +36,7 @@
> >  #include <stddef.h>
> >  #include <stdint.h>
> >  #include <stdlib.h>
> >+#include <assert.h>
> >  #include <sys/mman.h>
> >  #include <unistd.h>
> >  #ifdef RTE_LIBRTE_VHOST_NUMA
> >@@ -178,6 +179,15 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
> >
> >  }
> >
> >+static void
> >+cleanup_vq(struct vhost_virtqueue *vq)
> >+{
> >+	if (vq->callfd >= 0)
> >+		close(vq->callfd);
> >+	if (vq->kickfd >= 0)
> >+		close(vq->kickfd);
> 
> both always >=0
> 
> >+}
> >+
> >  /*
> >   * Unmap any memory, close any file descriptors and
> >   * free any memory owned by a device.
> >@@ -185,6 +195,8 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
> >  static void
> >  cleanup_device(struct virtio_net *dev)
> >  {
> >+	uint32_t i;
> >+
> >  	/* Unmap QEMU memory file if mapped. */
> >  	if (dev->mem) {
> >  		munmap((void *)(uintptr_t)dev->mem->mapped_address,
> >@@ -192,15 +204,10 @@ cleanup_device(struct virtio_net *dev)
> >  		free(dev->mem);
> >  	}
> >
> >-	/* Close any event notifiers opened by device. */
> >-	if (dev->virtqueue[VIRTIO_RXQ]->callfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_RXQ]->callfd);
> >-	if (dev->virtqueue[VIRTIO_RXQ]->kickfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> >-	if (dev->virtqueue[VIRTIO_TXQ]->callfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_TXQ]->callfd);
> >-	if (dev->virtqueue[VIRTIO_TXQ]->kickfd >= 0)
> >-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> >+	for (i = 0; i < dev->virt_qp_nb; i++) {
> >+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ]);
> >+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ]);
> >+	}
> >  }
> >
> >  /*
> >@@ -209,9 +216,11 @@ cleanup_device(struct virtio_net *dev)
> >  static void
> >  free_device(struct virtio_net_config_ll *ll_dev)
> >  {
> >-	/* Free any malloc'd memory */
> >-	rte_free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
> >-	rte_free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
> >+	uint32_t i;
> >+
> >+	for (i = 0; i < ll_dev->dev.virt_qp_nb; i++)
> >+		rte_free(ll_dev->dev.virtqueue[i * VIRTIO_QNUM]);
> >+
> >  	rte_free(ll_dev);
> >  }
> >
> >@@ -244,6 +253,50 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
> >  	}
> >  }
> >
> >+static void
> >+init_vring_queue(struct vhost_virtqueue *vq)
> >+{
> >+	memset(vq, 0, sizeof(struct vhost_virtqueue));
> >+
> >+	vq->kickfd = -1;
> >+	vq->callfd = -1;
> 
> same here
> 
> >+
> >+	/* Backends are set to -1 indicating an inactive device. */
> >+	vq->backend = -1;
> >+}
> >+
> >+static void
> >+init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> >+{
> >+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
> >+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
> >+}
> >+
> >+static int
> >+alloc_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> >+{
> >+	struct vhost_virtqueue *virtqueue = NULL;
> >+	uint32_t virt_rx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_RXQ;
> >+	uint32_t virt_tx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_TXQ;
> >+
> >+	virtqueue = rte_malloc(NULL,
> >+			       sizeof(struct vhost_virtqueue) * VIRTIO_QNUM, 0);
> >+	if (virtqueue == NULL) {
> >+		RTE_LOG(ERR, VHOST_CONFIG,
> >+			"Failed to allocate memory for virt qp:%d.\n", qp_idx);
> >+		return -1;
> >+	}
> >+
> >+	dev->virtqueue[virt_rx_q_idx] = virtqueue;
> >+	dev->virtqueue[virt_tx_q_idx] = virtqueue + VIRTIO_TXQ;
> >+
> >+	init_vring_queue_pair(dev, qp_idx);
> >+
> >+	dev->virt_qp_nb += 1;
> >+
> >+	return 0;
> >+}
> >+
> >  /*
> >   *  Initialise all variables in device structure.
> >   */
> >@@ -251,6 +304,7 @@ static void
> >  init_device(struct virtio_net *dev)
> >  {
> >  	uint64_t vq_offset;
> >+	uint32_t i;
> >
> >  	/*
> >  	 * Virtqueues have already been malloced so
> >@@ -261,17 +315,9 @@ init_device(struct virtio_net *dev)
> >  	/* Set everything to 0. */
> >  	memset((void *)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
> >  		(sizeof(struct virtio_net) - (size_t)vq_offset));
> >-	memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
> >-	memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
> >
> >-	dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> >-	dev->virtqueue[VIRTIO_RXQ]->callfd = -1;
> >-	dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> >-	dev->virtqueue[VIRTIO_TXQ]->callfd = -1;
> >-
> >-	/* Backends are set to -1 indicating an inactive device. */
> >-	dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
> >-	dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
> >+	for (i = 0; i < dev->virt_qp_nb; i++)
> >+		init_vring_queue_pair(dev, i);
> >  }
> >
> >  /*
> >@@ -283,7 +329,6 @@ static int
> >  new_device(struct vhost_device_ctx ctx)
> >  {
> >  	struct virtio_net_config_ll *new_ll_dev;
> >-	struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
> >
> >  	/* Setup device and virtqueues. */
> >  	new_ll_dev = rte_malloc(NULL, sizeof(struct virtio_net_config_ll), 0);
> >@@ -294,28 +339,6 @@ new_device(struct vhost_device_ctx ctx)
> >  		return -1;
> >  	}
> >
> >-	virtqueue_rx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> >-	if (virtqueue_rx == NULL) {
> >-		rte_free(new_ll_dev);
> >-		RTE_LOG(ERR, VHOST_CONFIG,
> >-			"(%"PRIu64") Failed to allocate memory for rxq.\n",
> >-			ctx.fh);
> >-		return -1;
> >-	}
> >-
> >-	virtqueue_tx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> >-	if (virtqueue_tx == NULL) {
> >-		rte_free(virtqueue_rx);
> >-		rte_free(new_ll_dev);
> >-		RTE_LOG(ERR, VHOST_CONFIG,
> >-			"(%"PRIu64") Failed to allocate memory for txq.\n",
> >-			ctx.fh);
> >-		return -1;
> >-	}
> >-
> >-	new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
> >-	new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
> >-
> >  	/* Initialise device and virtqueues. */
> >  	init_device(&new_ll_dev->dev);
> >
> >@@ -680,13 +703,21 @@ set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
> >  {
> >  	struct virtio_net *dev;
> >  	struct vhost_virtqueue *vq;
> >+	uint32_t cur_qp_idx = file->index / VIRTIO_QNUM;
> >
> >  	dev = get_device(ctx);
> >  	if (dev == NULL)
> >  		return -1;
> >
> >+	/* alloc vring queue pair if it is a new queue pair */
> >+	if (cur_qp_idx + 1 > dev->virt_qp_nb) {
> >+		if (alloc_vring_queue_pair(dev, cur_qp_idx) < 0)
> >+			return -1;
> >+	}
> >+
> >  	/* file->index refers to the queue index. The txq is 1, rxq is 0. */
> >  	vq = dev->virtqueue[file->index];
> >+	assert(vq != NULL);
> >
> >  	if (vq->callfd >= 0)
> >  		close(vq->callfd);
> >
> 
> 
> I hope I helped,
> Thanks,
> Marcel
> 

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Marcel Apfelbaum]

On 09/21/2015 05:06 AM, Yuanhan Liu wrote:
> On Sun, Sep 20, 2015 at 04:58:42PM +0300, Marcel Apfelbaum wrote:
>> On 09/18/2015 06:10 PM, Yuanhan Liu wrote:
>>> All queue pairs, including the default (the first) queue pair,
>>> are allocated dynamically, when a vring_call message is received
>>> first time for a specific queue pair.
>>>
>>> This is a refactor work for enabling vhost-user multiple queue;
>>> it should not break anything as it does no functional changes:
>>> we don't support mq set, so there is only one mq at max.
>>>
>>> This patch is based on Changchun's patch.
>>>
>>> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
>>> ---
>>>   lib/librte_vhost/rte_virtio_net.h             |   3 +-
>>>   lib/librte_vhost/vhost_user/virtio-net-user.c |  44 +++++-----
>>>   lib/librte_vhost/virtio-net.c                 | 121 ++++++++++++++++----------
>>>   3 files changed, 102 insertions(+), 66 deletions(-)
>>>
>>> diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
>>> index e3a21e5..5dd6493 100644
>>> --- a/lib/librte_vhost/rte_virtio_net.h
>>> +++ b/lib/librte_vhost/rte_virtio_net.h
>>> @@ -96,7 +96,7 @@ struct vhost_virtqueue {
>>>    * Device structure contains all configuration information relating to the device.
>>>    */
>>>   struct virtio_net {
>>> -	struct vhost_virtqueue	*virtqueue[VIRTIO_QNUM];	/**< Contains all virtqueue information. */
>>> +	struct vhost_virtqueue	*virtqueue[VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX];	/**< Contains all virtqueue information. */
>>>   	struct virtio_memory	*mem;		/**< QEMU memory and memory region information. */
>>>   	uint64_t		features;	/**< Negotiated feature set. */
>>>   	uint64_t		protocol_features;	/**< Negotiated protocol feature set. */
>>> @@ -104,6 +104,7 @@ struct virtio_net {
>>>   	uint32_t		flags;		/**< Device flags. Only used to check if device is running on data core. */
>>>   #define IF_NAME_SZ (PATH_MAX > IFNAMSIZ ? PATH_MAX : IFNAMSIZ)
>>>   	char			ifname[IF_NAME_SZ];	/**< Name of the tap device or socket path. */
>>> +	uint32_t		virt_qp_nb;	/**< number of queue pair we have allocated */
>>>   	void			*priv;		/**< private context */
>>>   } __rte_cache_aligned;
>>>
>>> diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
>>> index 360254e..e83d279 100644
>>> --- a/lib/librte_vhost/vhost_user/virtio-net-user.c
>>> +++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
>>> @@ -206,25 +206,33 @@ err_mmap:
>>>   }
>>>
>>
>> Hi,
>>
>>>   static int
>>> +vq_is_ready(struct vhost_virtqueue *vq)
>>> +{
>>> +	return vq && vq->desc   &&
>>> +	       vq->kickfd != -1 &&
>>> +	       vq->callfd != -1;
>>
>>   kickfd and callfd are unsigned
>
> Hi,
>
> I have made 4 cleanup patches few weeks before, including the patch
> to define kickfd and callfd as int type, and they have already got
> the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
> they will be merged, hence I made this patchset based on them.
>
> This will also answer the question from your another email: can't
> apply.

Hi,
Thank you for the response, it makes sense now.

T have another issue, maybe you can help.
I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.

I am using a simple setup:
     http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).

The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
once I set queues=n in guest. (virtio-net uses only one queue when the guest starts, even if QEMU has multiple queues).

Two steps are required in order to enable multiple queues in OVS.
1. Apply the following patch:
  - https://www.mail-archive.com/dev@openvswitch.org/msg49198.html
  - It needs merging (I think)
2. Configure ovs for multiqueue:
  - ovs-vsctl set Open_vSwitch . other_config:n-dpdk-rxqs=<queues nr, the same as QEMU>
  - ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=<cpu mask for rx queues, say 0xff00>
3. In order to set queues=n in guest use:
  - ethtool -L eth0 combined <queues nr, the same as QEMU>

Any pointers/ideas would be appreciated.

Thank you,
Marcel



>
> Sorry for not pointing it out, as I assume Thomas(cc'ed) will apply
> them soon. And thanks for the review, anyway.
>
> 	--yliu
>>
>>> +}
>>> +
>>> +static int
>>>   virtio_is_ready(struct virtio_net *dev)
>>>   {
>>>   	struct vhost_virtqueue *rvq, *tvq;
>>> +	uint32_t i;
>>>
>>> -	/* mq support in future.*/
>>> -	rvq = dev->virtqueue[VIRTIO_RXQ];
>>> -	tvq = dev->virtqueue[VIRTIO_TXQ];
>>> -	if (rvq && tvq && rvq->desc && tvq->desc &&
>>> -		(rvq->kickfd != -1) &&
>>> -		(rvq->callfd != -1) &&
>>> -		(tvq->kickfd != -1) &&
>>> -		(tvq->callfd != -1)) {
>>> -		RTE_LOG(INFO, VHOST_CONFIG,
>>> -			"virtio is now ready for processing.\n");
>>> -		return 1;
>>> +	for (i = 0; i < dev->virt_qp_nb; i++) {
>>> +		rvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ];
>>> +		tvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ];
>>> +
>>> +		if (!vq_is_ready(rvq) || !vq_is_ready(tvq)) {
>>> +			RTE_LOG(INFO, VHOST_CONFIG,
>>> +				"virtio is not ready for processing.\n");
>>> +			return 0;
>>> +		}
>>>   	}
>>> +
>>>   	RTE_LOG(INFO, VHOST_CONFIG,
>>> -		"virtio isn't ready for processing.\n");
>>> -	return 0;
>>> +		"virtio is now ready for processing.\n");
>>> +	return 1;
>>>   }
>>>
>>>   void
>>> @@ -290,13 +298,9 @@ user_get_vring_base(struct vhost_device_ctx ctx,
>>>   	 * sent and only sent in vhost_vring_stop.
>>>   	 * TODO: cleanup the vring, it isn't usable since here.
>>>   	 */
>>> -	if ((dev->virtqueue[VIRTIO_RXQ]->kickfd) >= 0) {
>>> -		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
>>> -		dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
>>> -	}
>>> -	if ((dev->virtqueue[VIRTIO_TXQ]->kickfd) >= 0) {
>>> -		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
>>> -		dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
>>> +	if ((dev->virtqueue[state->index]->kickfd) >= 0) {
>>
>> always >= 0
>>
>>> +		close(dev->virtqueue[state->index]->kickfd);
>>> +		dev->virtqueue[state->index]->kickfd = -1;
>>
>> again unsigned
>>
>>>   	}
>>>
>>>   	return 0;
>>> diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
>>> index deac6b9..643a92e 100644
>>> --- a/lib/librte_vhost/virtio-net.c
>>> +++ b/lib/librte_vhost/virtio-net.c
>>> @@ -36,6 +36,7 @@
>>>   #include <stddef.h>
>>>   #include <stdint.h>
>>>   #include <stdlib.h>
>>> +#include <assert.h>
>>>   #include <sys/mman.h>
>>>   #include <unistd.h>
>>>   #ifdef RTE_LIBRTE_VHOST_NUMA
>>> @@ -178,6 +179,15 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
>>>
>>>   }
>>>
>>> +static void
>>> +cleanup_vq(struct vhost_virtqueue *vq)
>>> +{
>>> +	if (vq->callfd >= 0)
>>> +		close(vq->callfd);
>>> +	if (vq->kickfd >= 0)
>>> +		close(vq->kickfd);
>>
>> both always >=0
>>
>>> +}
>>> +
>>>   /*
>>>    * Unmap any memory, close any file descriptors and
>>>    * free any memory owned by a device.
>>> @@ -185,6 +195,8 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
>>>   static void
>>>   cleanup_device(struct virtio_net *dev)
>>>   {
>>> +	uint32_t i;
>>> +
>>>   	/* Unmap QEMU memory file if mapped. */
>>>   	if (dev->mem) {
>>>   		munmap((void *)(uintptr_t)dev->mem->mapped_address,
>>> @@ -192,15 +204,10 @@ cleanup_device(struct virtio_net *dev)
>>>   		free(dev->mem);
>>>   	}
>>>
>>> -	/* Close any event notifiers opened by device. */
>>> -	if (dev->virtqueue[VIRTIO_RXQ]->callfd >= 0)
>>> -		close(dev->virtqueue[VIRTIO_RXQ]->callfd);
>>> -	if (dev->virtqueue[VIRTIO_RXQ]->kickfd >= 0)
>>> -		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
>>> -	if (dev->virtqueue[VIRTIO_TXQ]->callfd >= 0)
>>> -		close(dev->virtqueue[VIRTIO_TXQ]->callfd);
>>> -	if (dev->virtqueue[VIRTIO_TXQ]->kickfd >= 0)
>>> -		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
>>> +	for (i = 0; i < dev->virt_qp_nb; i++) {
>>> +		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ]);
>>> +		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ]);
>>> +	}
>>>   }
>>>
>>>   /*
>>> @@ -209,9 +216,11 @@ cleanup_device(struct virtio_net *dev)
>>>   static void
>>>   free_device(struct virtio_net_config_ll *ll_dev)
>>>   {
>>> -	/* Free any malloc'd memory */
>>> -	rte_free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
>>> -	rte_free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
>>> +	uint32_t i;
>>> +
>>> +	for (i = 0; i < ll_dev->dev.virt_qp_nb; i++)
>>> +		rte_free(ll_dev->dev.virtqueue[i * VIRTIO_QNUM]);
>>> +
>>>   	rte_free(ll_dev);
>>>   }
>>>
>>> @@ -244,6 +253,50 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
>>>   	}
>>>   }
>>>
>>> +static void
>>> +init_vring_queue(struct vhost_virtqueue *vq)
>>> +{
>>> +	memset(vq, 0, sizeof(struct vhost_virtqueue));
>>> +
>>> +	vq->kickfd = -1;
>>> +	vq->callfd = -1;
>>
>> same here
>>
>>> +
>>> +	/* Backends are set to -1 indicating an inactive device. */
>>> +	vq->backend = -1;
>>> +}
>>> +
>>> +static void
>>> +init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
>>> +{
>>> +	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
>>> +	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
>>> +}
>>> +
>>> +static int
>>> +alloc_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
>>> +{
>>> +	struct vhost_virtqueue *virtqueue = NULL;
>>> +	uint32_t virt_rx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_RXQ;
>>> +	uint32_t virt_tx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_TXQ;
>>> +
>>> +	virtqueue = rte_malloc(NULL,
>>> +			       sizeof(struct vhost_virtqueue) * VIRTIO_QNUM, 0);
>>> +	if (virtqueue == NULL) {
>>> +		RTE_LOG(ERR, VHOST_CONFIG,
>>> +			"Failed to allocate memory for virt qp:%d.\n", qp_idx);
>>> +		return -1;
>>> +	}
>>> +
>>> +	dev->virtqueue[virt_rx_q_idx] = virtqueue;
>>> +	dev->virtqueue[virt_tx_q_idx] = virtqueue + VIRTIO_TXQ;
>>> +
>>> +	init_vring_queue_pair(dev, qp_idx);
>>> +
>>> +	dev->virt_qp_nb += 1;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>>   /*
>>>    *  Initialise all variables in device structure.
>>>    */
>>> @@ -251,6 +304,7 @@ static void
>>>   init_device(struct virtio_net *dev)
>>>   {
>>>   	uint64_t vq_offset;
>>> +	uint32_t i;
>>>
>>>   	/*
>>>   	 * Virtqueues have already been malloced so
>>> @@ -261,17 +315,9 @@ init_device(struct virtio_net *dev)
>>>   	/* Set everything to 0. */
>>>   	memset((void *)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
>>>   		(sizeof(struct virtio_net) - (size_t)vq_offset));
>>> -	memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
>>> -	memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
>>>
>>> -	dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
>>> -	dev->virtqueue[VIRTIO_RXQ]->callfd = -1;
>>> -	dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
>>> -	dev->virtqueue[VIRTIO_TXQ]->callfd = -1;
>>> -
>>> -	/* Backends are set to -1 indicating an inactive device. */
>>> -	dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
>>> -	dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
>>> +	for (i = 0; i < dev->virt_qp_nb; i++)
>>> +		init_vring_queue_pair(dev, i);
>>>   }
>>>
>>>   /*
>>> @@ -283,7 +329,6 @@ static int
>>>   new_device(struct vhost_device_ctx ctx)
>>>   {
>>>   	struct virtio_net_config_ll *new_ll_dev;
>>> -	struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
>>>
>>>   	/* Setup device and virtqueues. */
>>>   	new_ll_dev = rte_malloc(NULL, sizeof(struct virtio_net_config_ll), 0);
>>> @@ -294,28 +339,6 @@ new_device(struct vhost_device_ctx ctx)
>>>   		return -1;
>>>   	}
>>>
>>> -	virtqueue_rx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
>>> -	if (virtqueue_rx == NULL) {
>>> -		rte_free(new_ll_dev);
>>> -		RTE_LOG(ERR, VHOST_CONFIG,
>>> -			"(%"PRIu64") Failed to allocate memory for rxq.\n",
>>> -			ctx.fh);
>>> -		return -1;
>>> -	}
>>> -
>>> -	virtqueue_tx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
>>> -	if (virtqueue_tx == NULL) {
>>> -		rte_free(virtqueue_rx);
>>> -		rte_free(new_ll_dev);
>>> -		RTE_LOG(ERR, VHOST_CONFIG,
>>> -			"(%"PRIu64") Failed to allocate memory for txq.\n",
>>> -			ctx.fh);
>>> -		return -1;
>>> -	}
>>> -
>>> -	new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
>>> -	new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
>>> -
>>>   	/* Initialise device and virtqueues. */
>>>   	init_device(&new_ll_dev->dev);
>>>
>>> @@ -680,13 +703,21 @@ set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
>>>   {
>>>   	struct virtio_net *dev;
>>>   	struct vhost_virtqueue *vq;
>>> +	uint32_t cur_qp_idx = file->index / VIRTIO_QNUM;
>>>
>>>   	dev = get_device(ctx);
>>>   	if (dev == NULL)
>>>   		return -1;
>>>
>>> +	/* alloc vring queue pair if it is a new queue pair */
>>> +	if (cur_qp_idx + 1 > dev->virt_qp_nb) {
>>> +		if (alloc_vring_queue_pair(dev, cur_qp_idx) < 0)
>>> +			return -1;
>>> +	}
>>> +
>>>   	/* file->index refers to the queue index. The txq is 1, rxq is 0. */
>>>   	vq = dev->virtqueue[file->index];
>>> +	assert(vq != NULL);
>>>
>>>   	if (vq->callfd >= 0)
>>>   		close(vq->callfd);
>>>
>>
>>
>> I hope I helped,
>> Thanks,
>> Marcel
>>

Re: [dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message

[Yuanhan Liu]

On Mon, Sep 21, 2015 at 12:02:20PM +0300, Michael S. Tsirkin wrote:
> On Mon, Sep 21, 2015 at 10:22:52AM +0800, Yuanhan Liu wrote:
> > On Sun, Sep 20, 2015 at 12:37:35PM +0300, Michael S. Tsirkin wrote:
> > > On Fri, Sep 18, 2015 at 11:10:54PM +0800, Yuanhan Liu wrote:
> > > > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > > > 
> > > > This message is used to enable/disable a specific vring queue pair.
> > > > The first queue pair is enabled by default.
> > > > 
> > > > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > > > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> > > > ---
> > [snip...]
> > > >  void
> > > >  user_destroy_device(struct vhost_device_ctx ctx)
> > > >  {
> > > 
> > > It might be a good idea to flush any packets being processed
> > > on relevant cores at this point.
> > 
> > They are offloaded to the application (examples/vhost/vhost-switch in
> > this case).
> > 
> > user_destroy_device will invoke the application's "destroy_device()"
> > callback in the end, which, in our case, will set "remove" flag. The
> > core worker will then drain and free the RX queue and free TX queue
> > once the "remove" flag is set.
> > 
> > 	--yliu
> 
> 
> Oh, I really meant user_set_vring_enable.

Will a per-vring callback help then?

We may prototype the callback to "vring_state_changed(dev, vring_index)"
so that the application could either, as you suggested, flushes any packets
haven't been processed yet, or simply drops them.

	--yliu

Re: [dpdk-dev] [PATCH v5 resend 04/12] vhost: rxtx: prepare work for multiple queue support

[Yuanhan Liu]

On Mon, Sep 21, 2015 at 12:04:16PM +0300, Michael S. Tsirkin wrote:
> On Mon, Sep 21, 2015 at 10:25:18AM +0800, Yuanhan Liu wrote:
> > On Sun, Sep 20, 2015 at 12:29:17PM +0300, Michael S. Tsirkin wrote:
> > > On Fri, Sep 18, 2015 at 11:10:53PM +0800, Yuanhan Liu wrote:
> > > > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > > > 
> > > > Do not use VIRTIO_RXQ or VIRTIO_TXQ anymore; use the queue_id,
> > > > instead, which will be set to a proper value for a specific queue
> > > > when we have multiple queue support enabled.
> > > > 
> > > > For now, queue_id is still set with VIRTIO_RXQ or VIRTIO_TXQ,
> > > > so it should not break anything.
> > > > 
> > > > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > > > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> > > 
> > > What I'm missing is the logic that tracks which tx vq
> > > did a specific flow use, to send traffic back on the correct
> > > rx vq.
> > > 
> > > Is this something added by one of the follow-up patches?
> > 
> > Yeah, and also, they are offloaded to the application (examples/
> > vhost/vhost-switch): patch 11 does the job.
> > 
> > 	--yliu
> 
> Couldn't find anything dealing with flows there ...
> Could you be more specific pls?

Sure.

For the following code pieces of new_device():

    2868         /* Find a suitable lcore to add the device. */
    2869         for (i = 0; i < rxq; i++) {
    2870                 device_num_min = num_devices;
    2871                 RTE_LCORE_FOREACH_SLAVE(lcore) {
    2872                         if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
    2873                                 device_num_min = lcore_info[lcore].lcore_ll->device_num;
    2874                                 core_add = lcore;
    2875                         }
    2876                 }

    ...

    2888                 ll_dev->work_qp_idx = i;
    2889                 rte_vhost_core_id_set(dev, i, core_add);
    2890                 add_data_ll_entry(&lcore_info[core_add].lcore_ll->ll_root_used, ll_dev);
    2891
    ....
    2895                 lcore_info[core_add].lcore_ll->device_num++;
    2896                 RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d for vq: %d\n",
    2897                         dev->device_fh, core_add, i);
    2898         }


It will find a suitable lcore and bind a vq pair to it. Here is the
log message that might help you understand it better:

    VHOST_DATA: (0) Device has been added to data core 1 for vq: 0
    VHOST_DATA: (0) Device has been added to data core 2 for vq: 1



For the following code pieces of switch_worker():

    1433           if (likely(!vdev->remove)) {
    1434                   /* Handle guest TX*/
    1435                   uint16_t qp_idx = dev_ll->work_qp_idx;
    1436                   tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ + qp_idx * VIRTIO_QNUM,
    1437                                   mbuf_pool, pkts_burst, MAX_PKT_BURST);
    1438                   /*
    1439                    * If this is the first received packet we need to learn
    1440                    * the MAC and setup VMDQ
    1441                    */
    1442                   if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
    1443                           if (vdev->remove || (link_vmdq(vdev, pkts_burst[0]) == -1)) {
    1444                                   while (tx_count)
    1445                                           rte_pktmbuf_free(pkts_burst[--tx_count]);
    1446                           }
    1447                   }
    1448                   while (tx_count)
    1449                           virtio_tx_route(vdev, pkts_burst[--tx_count],
    1450                                   (uint16_t)dev->device_fh, qp_idx);
    1451           }
    

Line 1434 will get the right qp index for the current lcore, and
Line 1436 then gets the packets from corresponding RX queue of
the physical eth device.

Line 1448-1450 will then deliver them one by one to corresponding
TX queue, by invoking virtio_tx_route() function.

And note that the vhost example code is a bit messy. I planed to
do some cleanups, but I'd like to do it only after this patch set
has been merge, for not adding unnecessary mess to this patch set
as well as the patch review.


	--yliu
> 
> > > 
> > > 
> > > > ---
> > > >  lib/librte_vhost/vhost_rxtx.c | 46 ++++++++++++++++++++++++++++++-------------
> > > >  1 file changed, 32 insertions(+), 14 deletions(-)
> > > > 
> > > > diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> > > > index b2b2bcc..a4ab6ca 100644
> > > > --- a/lib/librte_vhost/vhost_rxtx.c
> > > > +++ b/lib/librte_vhost/vhost_rxtx.c
> > > > @@ -42,6 +42,16 @@
> > > >  
> > > >  #define MAX_PKT_BURST 32
> > > >  
> > > > +static inline int __attribute__((always_inline))
> > > > +is_valid_virt_queue_idx(uint32_t virtq_idx, int is_tx, uint32_t max_qp_idx)
> > > > +{
> > > > +	if ((is_tx ^ (virtq_idx & 0x1)) ||
> > > > +	    (virtq_idx >= max_qp_idx * VIRTIO_QNUM))
> > > > +		return 0;
> > > > +
> > > > +	return 1;
> > > > +}
> > > > +
> > > >  /**
> > > >   * This function adds buffers to the virtio devices RX virtqueue. Buffers can
> > > >   * be received from the physical port or from another virtio device. A packet
> > > > @@ -68,12 +78,14 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
> > > >  	uint8_t success = 0;
> > > >  
> > > >  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
> > > > -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> > > > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > > > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> > > > +		RTE_LOG(ERR, VHOST_DATA,
> > > > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > > > +			__func__, dev->device_fh, queue_id);
> > > >  		return 0;
> > > >  	}
> > > >  
> > > > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > > > +	vq = dev->virtqueue[queue_id];
> > > >  	count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
> > > >  
> > > >  	/*
> > > > @@ -235,8 +247,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
> > > >  }
> > > >  
> > > >  static inline uint32_t __attribute__((always_inline))
> > > > -copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
> > > > -	uint16_t res_end_idx, struct rte_mbuf *pkt)
> > > > +copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
> > > > +			uint16_t res_base_idx, uint16_t res_end_idx,
> > > > +			struct rte_mbuf *pkt)
> > > >  {
> > > >  	uint32_t vec_idx = 0;
> > > >  	uint32_t entry_success = 0;
> > > > @@ -264,7 +277,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint16_t res_base_idx,
> > > >  	 * Convert from gpa to vva
> > > >  	 * (guest physical addr -> vhost virtual addr)
> > > >  	 */
> > > > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > > > +	vq = dev->virtqueue[queue_id];
> > > >  	vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
> > > >  	vb_hdr_addr = vb_addr;
> > > >  
> > > > @@ -464,11 +477,14 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
> > > >  
> > > >  	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
> > > >  		dev->device_fh);
> > > > -	if (unlikely(queue_id != VIRTIO_RXQ)) {
> > > > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > > > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 0, dev->virt_qp_nb))) {
> > > > +		RTE_LOG(ERR, VHOST_DATA,
> > > > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > > > +			__func__, dev->device_fh, queue_id);
> > > > +		return 0;
> > > >  	}
> > > >  
> > > > -	vq = dev->virtqueue[VIRTIO_RXQ];
> > > > +	vq = dev->virtqueue[queue_id];
> > > >  	count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
> > > >  
> > > >  	if (count == 0)
> > > > @@ -509,8 +525,8 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
> > > >  							res_cur_idx);
> > > >  		} while (success == 0);
> > > >  
> > > > -		entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
> > > > -			res_cur_idx, pkts[pkt_idx]);
> > > > +		entry_success = copy_from_mbuf_to_vring(dev, queue_id,
> > > > +			res_base_idx, res_cur_idx, pkts[pkt_idx]);
> > > >  
> > > >  		rte_compiler_barrier();
> > > >  
> > > > @@ -559,12 +575,14 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
> > > >  	uint16_t free_entries, entry_success = 0;
> > > >  	uint16_t avail_idx;
> > > >  
> > > > -	if (unlikely(queue_id != VIRTIO_TXQ)) {
> > > > -		LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
> > > > +	if (unlikely(!is_valid_virt_queue_idx(queue_id, 1, dev->virt_qp_nb))) {
> > > > +		RTE_LOG(ERR, VHOST_DATA,
> > > > +			"%s (%"PRIu64"): virtqueue idx:%d invalid.\n",
> > > > +			__func__, dev->device_fh, queue_id);
> > > >  		return 0;
> > > >  	}
> > > >  
> > > > -	vq = dev->virtqueue[VIRTIO_TXQ];
> > > > +	vq = dev->virtqueue[queue_id];
> > > >  	avail_idx =  *((volatile uint16_t *)&vq->avail->idx);
> > > >  
> > > >  	/* If there are no available buffers then return. */
> > > > -- 
> > > > 1.9.0

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Yuanhan Liu]

On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
> On 09/21/2015 05:06 AM, Yuanhan Liu wrote:
> >On Sun, Sep 20, 2015 at 04:58:42PM +0300, Marcel Apfelbaum wrote:
> >>On 09/18/2015 06:10 PM, Yuanhan Liu wrote:
> >>>All queue pairs, including the default (the first) queue pair,
> >>>are allocated dynamically, when a vring_call message is received
> >>>first time for a specific queue pair.
> >>>
> >>>This is a refactor work for enabling vhost-user multiple queue;
> >>>it should not break anything as it does no functional changes:
> >>>we don't support mq set, so there is only one mq at max.
> >>>
> >>>This patch is based on Changchun's patch.
> >>>
> >>>Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> >>>---
> >>>  lib/librte_vhost/rte_virtio_net.h             |   3 +-
> >>>  lib/librte_vhost/vhost_user/virtio-net-user.c |  44 +++++-----
> >>>  lib/librte_vhost/virtio-net.c                 | 121 ++++++++++++++++----------
> >>>  3 files changed, 102 insertions(+), 66 deletions(-)
> >>>
> >>>diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
> >>>index e3a21e5..5dd6493 100644
> >>>--- a/lib/librte_vhost/rte_virtio_net.h
> >>>+++ b/lib/librte_vhost/rte_virtio_net.h
> >>>@@ -96,7 +96,7 @@ struct vhost_virtqueue {
> >>>   * Device structure contains all configuration information relating to the device.
> >>>   */
> >>>  struct virtio_net {
> >>>-	struct vhost_virtqueue	*virtqueue[VIRTIO_QNUM];	/**< Contains all virtqueue information. */
> >>>+	struct vhost_virtqueue	*virtqueue[VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX];	/**< Contains all virtqueue information. */
> >>>  	struct virtio_memory	*mem;		/**< QEMU memory and memory region information. */
> >>>  	uint64_t		features;	/**< Negotiated feature set. */
> >>>  	uint64_t		protocol_features;	/**< Negotiated protocol feature set. */
> >>>@@ -104,6 +104,7 @@ struct virtio_net {
> >>>  	uint32_t		flags;		/**< Device flags. Only used to check if device is running on data core. */
> >>>  #define IF_NAME_SZ (PATH_MAX > IFNAMSIZ ? PATH_MAX : IFNAMSIZ)
> >>>  	char			ifname[IF_NAME_SZ];	/**< Name of the tap device or socket path. */
> >>>+	uint32_t		virt_qp_nb;	/**< number of queue pair we have allocated */
> >>>  	void			*priv;		/**< private context */
> >>>  } __rte_cache_aligned;
> >>>
> >>>diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
> >>>index 360254e..e83d279 100644
> >>>--- a/lib/librte_vhost/vhost_user/virtio-net-user.c
> >>>+++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
> >>>@@ -206,25 +206,33 @@ err_mmap:
> >>>  }
> >>>
> >>
> >>Hi,
> >>
> >>>  static int
> >>>+vq_is_ready(struct vhost_virtqueue *vq)
> >>>+{
> >>>+	return vq && vq->desc   &&
> >>>+	       vq->kickfd != -1 &&
> >>>+	       vq->callfd != -1;
> >>
> >>  kickfd and callfd are unsigned
> >
> >Hi,
> >
> >I have made 4 cleanup patches few weeks before, including the patch
> >to define kickfd and callfd as int type, and they have already got
> >the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
> >they will be merged, hence I made this patchset based on them.
> >
> >This will also answer the question from your another email: can't
> >apply.
> 
> Hi,
> Thank you for the response, it makes sense now.
> 
> T have another issue, maybe you can help.
> I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
> 
> I am using a simple setup:
>     http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
> that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
> 
> The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
> once I set queues=n in guest.

Hi,

Could you be more specific about that? It also would be helpful if you
could tell me the steps, besides those setup steps you mentioned in the
qemu wiki and this email, you did for testing.

I had a very rough testing based on your test guides, I indeed found
an issue: the IP address assigned by "ifconfig" disappears soon in the
first few times and after about 2 or 3 times reset, it never changes.

(well, I saw that quite few times before while trying different QEMU
net devices. So, it might be a system configuration issue, or something
else?)

Besides that, it works, say, I can wget a big file from host.

	--yliu

> (virtio-net uses only one queue when the guest starts, even if QEMU has multiple queues).
> 
> Two steps are required in order to enable multiple queues in OVS.
> 1. Apply the following patch:
>  - https://www.mail-archive.com/dev@openvswitch.org/msg49198.html
>  - It needs merging (I think)
> 2. Configure ovs for multiqueue:
>  - ovs-vsctl set Open_vSwitch . other_config:n-dpdk-rxqs=<queues nr, the same as QEMU>
>  - ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=<cpu mask for rx queues, say 0xff00>
> 3. In order to set queues=n in guest use:
>  - ethtool -L eth0 combined <queues nr, the same as QEMU>
> 
> Any pointers/ideas would be appreciated.
> 
> Thank you,
> Marcel
> 
> 
> 
> >
> >Sorry for not pointing it out, as I assume Thomas(cc'ed) will apply
> >them soon. And thanks for the review, anyway.
> >
> >	--yliu
> >>
> >>>+}
> >>>+
> >>>+static int
> >>>  virtio_is_ready(struct virtio_net *dev)
> >>>  {
> >>>  	struct vhost_virtqueue *rvq, *tvq;
> >>>+	uint32_t i;
> >>>
> >>>-	/* mq support in future.*/
> >>>-	rvq = dev->virtqueue[VIRTIO_RXQ];
> >>>-	tvq = dev->virtqueue[VIRTIO_TXQ];
> >>>-	if (rvq && tvq && rvq->desc && tvq->desc &&
> >>>-		(rvq->kickfd != -1) &&
> >>>-		(rvq->callfd != -1) &&
> >>>-		(tvq->kickfd != -1) &&
> >>>-		(tvq->callfd != -1)) {
> >>>-		RTE_LOG(INFO, VHOST_CONFIG,
> >>>-			"virtio is now ready for processing.\n");
> >>>-		return 1;
> >>>+	for (i = 0; i < dev->virt_qp_nb; i++) {
> >>>+		rvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ];
> >>>+		tvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ];
> >>>+
> >>>+		if (!vq_is_ready(rvq) || !vq_is_ready(tvq)) {
> >>>+			RTE_LOG(INFO, VHOST_CONFIG,
> >>>+				"virtio is not ready for processing.\n");
> >>>+			return 0;
> >>>+		}
> >>>  	}
> >>>+
> >>>  	RTE_LOG(INFO, VHOST_CONFIG,
> >>>-		"virtio isn't ready for processing.\n");
> >>>-	return 0;
> >>>+		"virtio is now ready for processing.\n");
> >>>+	return 1;
> >>>  }
> >>>
> >>>  void
> >>>@@ -290,13 +298,9 @@ user_get_vring_base(struct vhost_device_ctx ctx,
> >>>  	 * sent and only sent in vhost_vring_stop.
> >>>  	 * TODO: cleanup the vring, it isn't usable since here.
> >>>  	 */
> >>>-	if ((dev->virtqueue[VIRTIO_RXQ]->kickfd) >= 0) {
> >>>-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> >>>-		dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> >>>-	}
> >>>-	if ((dev->virtqueue[VIRTIO_TXQ]->kickfd) >= 0) {
> >>>-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> >>>-		dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> >>>+	if ((dev->virtqueue[state->index]->kickfd) >= 0) {
> >>
> >>always >= 0
> >>
> >>>+		close(dev->virtqueue[state->index]->kickfd);
> >>>+		dev->virtqueue[state->index]->kickfd = -1;
> >>
> >>again unsigned
> >>
> >>>  	}
> >>>
> >>>  	return 0;
> >>>diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
> >>>index deac6b9..643a92e 100644
> >>>--- a/lib/librte_vhost/virtio-net.c
> >>>+++ b/lib/librte_vhost/virtio-net.c
> >>>@@ -36,6 +36,7 @@
> >>>  #include <stddef.h>
> >>>  #include <stdint.h>
> >>>  #include <stdlib.h>
> >>>+#include <assert.h>
> >>>  #include <sys/mman.h>
> >>>  #include <unistd.h>
> >>>  #ifdef RTE_LIBRTE_VHOST_NUMA
> >>>@@ -178,6 +179,15 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
> >>>
> >>>  }
> >>>
> >>>+static void
> >>>+cleanup_vq(struct vhost_virtqueue *vq)
> >>>+{
> >>>+	if (vq->callfd >= 0)
> >>>+		close(vq->callfd);
> >>>+	if (vq->kickfd >= 0)
> >>>+		close(vq->kickfd);
> >>
> >>both always >=0
> >>
> >>>+}
> >>>+
> >>>  /*
> >>>   * Unmap any memory, close any file descriptors and
> >>>   * free any memory owned by a device.
> >>>@@ -185,6 +195,8 @@ add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
> >>>  static void
> >>>  cleanup_device(struct virtio_net *dev)
> >>>  {
> >>>+	uint32_t i;
> >>>+
> >>>  	/* Unmap QEMU memory file if mapped. */
> >>>  	if (dev->mem) {
> >>>  		munmap((void *)(uintptr_t)dev->mem->mapped_address,
> >>>@@ -192,15 +204,10 @@ cleanup_device(struct virtio_net *dev)
> >>>  		free(dev->mem);
> >>>  	}
> >>>
> >>>-	/* Close any event notifiers opened by device. */
> >>>-	if (dev->virtqueue[VIRTIO_RXQ]->callfd >= 0)
> >>>-		close(dev->virtqueue[VIRTIO_RXQ]->callfd);
> >>>-	if (dev->virtqueue[VIRTIO_RXQ]->kickfd >= 0)
> >>>-		close(dev->virtqueue[VIRTIO_RXQ]->kickfd);
> >>>-	if (dev->virtqueue[VIRTIO_TXQ]->callfd >= 0)
> >>>-		close(dev->virtqueue[VIRTIO_TXQ]->callfd);
> >>>-	if (dev->virtqueue[VIRTIO_TXQ]->kickfd >= 0)
> >>>-		close(dev->virtqueue[VIRTIO_TXQ]->kickfd);
> >>>+	for (i = 0; i < dev->virt_qp_nb; i++) {
> >>>+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ]);
> >>>+		cleanup_vq(dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_TXQ]);
> >>>+	}
> >>>  }
> >>>
> >>>  /*
> >>>@@ -209,9 +216,11 @@ cleanup_device(struct virtio_net *dev)
> >>>  static void
> >>>  free_device(struct virtio_net_config_ll *ll_dev)
> >>>  {
> >>>-	/* Free any malloc'd memory */
> >>>-	rte_free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
> >>>-	rte_free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
> >>>+	uint32_t i;
> >>>+
> >>>+	for (i = 0; i < ll_dev->dev.virt_qp_nb; i++)
> >>>+		rte_free(ll_dev->dev.virtqueue[i * VIRTIO_QNUM]);
> >>>+
> >>>  	rte_free(ll_dev);
> >>>  }
> >>>
> >>>@@ -244,6 +253,50 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
> >>>  	}
> >>>  }
> >>>
> >>>+static void
> >>>+init_vring_queue(struct vhost_virtqueue *vq)
> >>>+{
> >>>+	memset(vq, 0, sizeof(struct vhost_virtqueue));
> >>>+
> >>>+	vq->kickfd = -1;
> >>>+	vq->callfd = -1;
> >>
> >>same here
> >>
> >>>+
> >>>+	/* Backends are set to -1 indicating an inactive device. */
> >>>+	vq->backend = -1;
> >>>+}
> >>>+
> >>>+static void
> >>>+init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> >>>+{
> >>>+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
> >>>+	init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
> >>>+}
> >>>+
> >>>+static int
> >>>+alloc_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
> >>>+{
> >>>+	struct vhost_virtqueue *virtqueue = NULL;
> >>>+	uint32_t virt_rx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_RXQ;
> >>>+	uint32_t virt_tx_q_idx = qp_idx * VIRTIO_QNUM + VIRTIO_TXQ;
> >>>+
> >>>+	virtqueue = rte_malloc(NULL,
> >>>+			       sizeof(struct vhost_virtqueue) * VIRTIO_QNUM, 0);
> >>>+	if (virtqueue == NULL) {
> >>>+		RTE_LOG(ERR, VHOST_CONFIG,
> >>>+			"Failed to allocate memory for virt qp:%d.\n", qp_idx);
> >>>+		return -1;
> >>>+	}
> >>>+
> >>>+	dev->virtqueue[virt_rx_q_idx] = virtqueue;
> >>>+	dev->virtqueue[virt_tx_q_idx] = virtqueue + VIRTIO_TXQ;
> >>>+
> >>>+	init_vring_queue_pair(dev, qp_idx);
> >>>+
> >>>+	dev->virt_qp_nb += 1;
> >>>+
> >>>+	return 0;
> >>>+}
> >>>+
> >>>  /*
> >>>   *  Initialise all variables in device structure.
> >>>   */
> >>>@@ -251,6 +304,7 @@ static void
> >>>  init_device(struct virtio_net *dev)
> >>>  {
> >>>  	uint64_t vq_offset;
> >>>+	uint32_t i;
> >>>
> >>>  	/*
> >>>  	 * Virtqueues have already been malloced so
> >>>@@ -261,17 +315,9 @@ init_device(struct virtio_net *dev)
> >>>  	/* Set everything to 0. */
> >>>  	memset((void *)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
> >>>  		(sizeof(struct virtio_net) - (size_t)vq_offset));
> >>>-	memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
> >>>-	memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
> >>>
> >>>-	dev->virtqueue[VIRTIO_RXQ]->kickfd = -1;
> >>>-	dev->virtqueue[VIRTIO_RXQ]->callfd = -1;
> >>>-	dev->virtqueue[VIRTIO_TXQ]->kickfd = -1;
> >>>-	dev->virtqueue[VIRTIO_TXQ]->callfd = -1;
> >>>-
> >>>-	/* Backends are set to -1 indicating an inactive device. */
> >>>-	dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
> >>>-	dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
> >>>+	for (i = 0; i < dev->virt_qp_nb; i++)
> >>>+		init_vring_queue_pair(dev, i);
> >>>  }
> >>>
> >>>  /*
> >>>@@ -283,7 +329,6 @@ static int
> >>>  new_device(struct vhost_device_ctx ctx)
> >>>  {
> >>>  	struct virtio_net_config_ll *new_ll_dev;
> >>>-	struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
> >>>
> >>>  	/* Setup device and virtqueues. */
> >>>  	new_ll_dev = rte_malloc(NULL, sizeof(struct virtio_net_config_ll), 0);
> >>>@@ -294,28 +339,6 @@ new_device(struct vhost_device_ctx ctx)
> >>>  		return -1;
> >>>  	}
> >>>
> >>>-	virtqueue_rx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> >>>-	if (virtqueue_rx == NULL) {
> >>>-		rte_free(new_ll_dev);
> >>>-		RTE_LOG(ERR, VHOST_CONFIG,
> >>>-			"(%"PRIu64") Failed to allocate memory for rxq.\n",
> >>>-			ctx.fh);
> >>>-		return -1;
> >>>-	}
> >>>-
> >>>-	virtqueue_tx = rte_malloc(NULL, sizeof(struct vhost_virtqueue), 0);
> >>>-	if (virtqueue_tx == NULL) {
> >>>-		rte_free(virtqueue_rx);
> >>>-		rte_free(new_ll_dev);
> >>>-		RTE_LOG(ERR, VHOST_CONFIG,
> >>>-			"(%"PRIu64") Failed to allocate memory for txq.\n",
> >>>-			ctx.fh);
> >>>-		return -1;
> >>>-	}
> >>>-
> >>>-	new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
> >>>-	new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
> >>>-
> >>>  	/* Initialise device and virtqueues. */
> >>>  	init_device(&new_ll_dev->dev);
> >>>
> >>>@@ -680,13 +703,21 @@ set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
> >>>  {
> >>>  	struct virtio_net *dev;
> >>>  	struct vhost_virtqueue *vq;
> >>>+	uint32_t cur_qp_idx = file->index / VIRTIO_QNUM;
> >>>
> >>>  	dev = get_device(ctx);
> >>>  	if (dev == NULL)
> >>>  		return -1;
> >>>
> >>>+	/* alloc vring queue pair if it is a new queue pair */
> >>>+	if (cur_qp_idx + 1 > dev->virt_qp_nb) {
> >>>+		if (alloc_vring_queue_pair(dev, cur_qp_idx) < 0)
> >>>+			return -1;
> >>>+	}
> >>>+
> >>>  	/* file->index refers to the queue index. The txq is 1, rxq is 0. */
> >>>  	vq = dev->virtqueue[file->index];
> >>>+	assert(vq != NULL);
> >>>
> >>>  	if (vq->callfd >= 0)
> >>>  		close(vq->callfd);
> >>>
> >>
> >>
> >>I hope I helped,
> >>Thanks,
> >>Marcel
> >>

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Marcel Apfelbaum]

On 09/22/2015 10:31 AM, Yuanhan Liu wrote:
> On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
[...]
>>>
>>> Hi,
>>>
>>> I have made 4 cleanup patches few weeks before, including the patch
>>> to define kickfd and callfd as int type, and they have already got
>>> the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
>>> they will be merged, hence I made this patchset based on them.
>>>
>>> This will also answer the question from your another email: can't
>>> apply.
>>
>> Hi,
>> Thank you for the response, it makes sense now.
>>
>> T have another issue, maybe you can help.
>> I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
>>
>> I am using a simple setup:
>>      http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
>> that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
>>
>> The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
>> once I set queues=n in guest.
>
> Hi,
>
> Could you be more specific about that? It also would be helpful if you
> could tell me the steps, besides those setup steps you mentioned in the
> qemu wiki and this email, you did for testing.
>

Hi,
Thank you for your help.

I am sorry the wiki is not enough, I'll be happy to add all the missing parts.
In the meantime maybe you can tell me where the problem is, I also suggest to
post here the output of journalctl command.

We only need a regular machine and we want traffic between 2 VMs. I'll try to summarize the steps:

1. Be sure you have enough hugepages enabled (2M pages are enough) and mounted.
2. Configure and start OVS following the wiki
    - we only want one bridge with 2 dpdkvhostuser ports.
3. Start VMs using the wiki command line
    - check journalctl for possible errors. You can use
         journalctl  --since `date +%T --date="-10 minutes"`
      to see only last 10 minutes.
4. Configure the guests IPs.
    - Disable the Network Manager as described bellow in the mail.
5. At this point you should be able to ping between guests.

Please let me know if you have any problem until this point.
I'll be happy to help. Please point any special steps you made that
are not in the WIKI. The journalctl logs would also help.

Does the ping between VMS work now?

If yes, please let me know and I'll go over MQ enabling.

> I had a very rough testing based on your test guides, I indeed found
> an issue: the IP address assigned by "ifconfig" disappears soon in the
> first few times and after about 2 or 3 times reset, it never changes.
>
> (well, I saw that quite few times before while trying different QEMU
> net devices. So, it might be a system configuration issue, or something
> else?)
>

You are right, this is a guest config issue, I think you should disable NetworkManager
for static IP addresses. Please use only the virtio-net device.

You cant try this:
sudo systemctl stop NetworkManager
sudo systemctl disable NetworkManager


> Besides that, it works, say, I can wget a big file from host.
>

The target here is traffic between 2 VMs.
We want to be able to ping (for example) between VMS when MQ > 1 is enabled on both guests:
- ethtool -L eth0 combined <queues nr, the same as QEMU>

Thank you again for the involvement, this is very much appreciated!
Marcel

> 	--yliu
>
>> (virtio-net uses only one queue when the guest starts, even if QEMU has multiple queues).
>>
>> Two steps are required in order to enable multiple queues in OVS.
>> 1. Apply the following patch:
>>   - https://www.mail-archive.com/dev@openvswitch.org/msg49198.html
>>   - It needs merging (I think)
>> 2. Configure ovs for multiqueue:
>>   - ovs-vsctl set Open_vSwitch . other_config:n-dpdk-rxqs=<queues nr, the same as QEMU>
>>   - ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=<cpu mask for rx queues, say 0xff00>
>> 3. In order to set queues=n in guest use:
>>   - ethtool -L eth0 combined <queues nr, the same as QEMU>
>>
>> Any pointers/ideas would be appreciated.
>>
>> Thank you,
>> Marcel
>>
>>
>>
>>>
[...]

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Yuanhan Liu]

On Tue, Sep 22, 2015 at 11:10:13AM +0300, Marcel Apfelbaum wrote:
> On 09/22/2015 10:31 AM, Yuanhan Liu wrote:
> >On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
> [...]
> >>>
> >>>Hi,
> >>>
> >>>I have made 4 cleanup patches few weeks before, including the patch
> >>>to define kickfd and callfd as int type, and they have already got
> >>>the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
> >>>they will be merged, hence I made this patchset based on them.
> >>>
> >>>This will also answer the question from your another email: can't
> >>>apply.
> >>
> >>Hi,
> >>Thank you for the response, it makes sense now.
> >>
> >>T have another issue, maybe you can help.
> >>I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
> >>
> >>I am using a simple setup:
> >>     http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
> >>that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
> >>
> >>The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
> >>once I set queues=n in guest.
> >
> >Hi,
> >
> >Could you be more specific about that? It also would be helpful if you
> >could tell me the steps, besides those setup steps you mentioned in the
> >qemu wiki and this email, you did for testing.
> >
> 
> Hi,
> Thank you for your help.
> 
> I am sorry the wiki is not enough, I'll be happy to add all the missing parts.
> In the meantime maybe you can tell me where the problem is, I also suggest to
> post here the output of journalctl command.
> 
> We only need a regular machine and we want traffic between 2 VMs. I'll try to summarize the steps:
> 
> 1. Be sure you have enough hugepages enabled (2M pages are enough) and mounted.
> 2. Configure and start OVS following the wiki
>    - we only want one bridge with 2 dpdkvhostuser ports.
> 3. Start VMs using the wiki command line
>    - check journalctl for possible errors. You can use
>         journalctl  --since `date +%T --date="-10 minutes"`
>      to see only last 10 minutes.
> 4. Configure the guests IPs.
>    - Disable the Network Manager as described bellow in the mail.
> 5. At this point you should be able to ping between guests.
> 
> Please let me know if you have any problem until this point.
> I'll be happy to help. Please point any special steps you made that
> are not in the WIKI. The journalctl logs would also help.
> 
> Does the ping between VMS work now?

Yes, it works, too. I can ping the other vm inside a vm.

    [root@dpdk-kvm ~]# ethtool -l eth0
    Channel parameters for eth0:
    Pre-set maximums:
    RX:             0
    TX:             0
    Other:          0
    Combined:       2
    Current hardware settings:
    RX:             0
    TX:             0
    Other:          0
    Combined:       2

    [root@dpdk-kvm ~]# ifconfig eth0
    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.100.11  netmask 255.255.255.0  broadcast 192.168.100.255
            inet6 fe80::5054:ff:fe12:3459  prefixlen 64  scopeid 0x20<link>
            ether 52:54:00:12:34:59  txqueuelen 1000  (Ethernet)
            RX packets 56  bytes 5166 (5.0 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 84  bytes 8303 (8.1 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    [root@dpdk-kvm ~]# ping 192.168.100.10
    PING 192.168.100.10 (192.168.100.10) 56(84) bytes of data.
    64 bytes from 192.168.100.10: icmp_seq=1 ttl=64 time=0.213 ms
    64 bytes from 192.168.100.10: icmp_seq=2 ttl=64 time=0.094 ms
    64 bytes from 192.168.100.10: icmp_seq=3 ttl=64 time=0.246 ms
    64 bytes from 192.168.100.10: icmp_seq=4 ttl=64 time=0.153 ms
    64 bytes from 192.168.100.10: icmp_seq=5 ttl=64 time=0.104 ms
    ^C
> 
> If yes, please let me know and I'll go over MQ enabling.

I'm just wondering why it doesn't work on your side.

> 
> >I had a very rough testing based on your test guides, I indeed found
> >an issue: the IP address assigned by "ifconfig" disappears soon in the
> >first few times and after about 2 or 3 times reset, it never changes.
> >
> >(well, I saw that quite few times before while trying different QEMU
> >net devices. So, it might be a system configuration issue, or something
> >else?)
> >
> 
> You are right, this is a guest config issue, I think you should disable NetworkManager

Yeah, I figured it out by my self, and it worked when I hardcoded it at
/etc/sysconfig/network-scripts/ifcfg-eth0.

> for static IP addresses. Please use only the virtio-net device.
> 
> You cant try this:
> sudo systemctl stop NetworkManager
> sudo systemctl disable NetworkManager

Thanks for the info and tip!

> 
> >Besides that, it works, say, I can wget a big file from host.
> >
> 
> The target here is traffic between 2 VMs.
> We want to be able to ping (for example) between VMS when MQ > 1 is enabled on both guests:
> - ethtool -L eth0 combined <queues nr, the same as QEMU>

As you can see from my command log, I did so and it worked :)

> 
> Thank you again for the involvement, this is very much appreciated!

Welcome! I need fix it if there is a bug.

	--yliu

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Marcel Apfelbaum]

On 09/22/2015 11:34 AM, Yuanhan Liu wrote:
> On Tue, Sep 22, 2015 at 11:10:13AM +0300, Marcel Apfelbaum wrote:
>> On 09/22/2015 10:31 AM, Yuanhan Liu wrote:
>>> On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
>> [...]
>>>>>
>>>>> Hi,
>>>>>
>>>>> I have made 4 cleanup patches few weeks before, including the patch
>>>>> to define kickfd and callfd as int type, and they have already got
>>>>> the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
>>>>> they will be merged, hence I made this patchset based on them.
>>>>>
>>>>> This will also answer the question from your another email: can't
>>>>> apply.
>>>>
>>>> Hi,
>>>> Thank you for the response, it makes sense now.
>>>>
>>>> T have another issue, maybe you can help.
>>>> I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
>>>>
>>>> I am using a simple setup:
>>>>      http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
>>>> that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
>>>>
>>>> The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
>>>> once I set queues=n in guest.
>>>
>>> Hi,
>>>
>>> Could you be more specific about that? It also would be helpful if you
>>> could tell me the steps, besides those setup steps you mentioned in the
>>> qemu wiki and this email, you did for testing.
>>>
>>
>> Hi,
>> Thank you for your help.
>>
>> I am sorry the wiki is not enough, I'll be happy to add all the missing parts.
>> In the meantime maybe you can tell me where the problem is, I also suggest to
>> post here the output of journalctl command.
>>
>> We only need a regular machine and we want traffic between 2 VMs. I'll try to summarize the steps:
>>
>> 1. Be sure you have enough hugepages enabled (2M pages are enough) and mounted.
>> 2. Configure and start OVS following the wiki
>>     - we only want one bridge with 2 dpdkvhostuser ports.
>> 3. Start VMs using the wiki command line
>>     - check journalctl for possible errors. You can use
>>          journalctl  --since `date +%T --date="-10 minutes"`
>>       to see only last 10 minutes.
>> 4. Configure the guests IPs.
>>     - Disable the Network Manager as described bellow in the mail.
>> 5. At this point you should be able to ping between guests.
>>
>> Please let me know if you have any problem until this point.
>> I'll be happy to help. Please point any special steps you made that
>> are not in the WIKI. The journalctl logs would also help.
>>
>> Does the ping between VMS work now?
>
> Yes, it works, too. I can ping the other vm inside a vm.
>
>      [root@dpdk-kvm ~]# ethtool -l eth0
>      Channel parameters for eth0:
>      Pre-set maximums:
>      RX:             0
>      TX:             0
>      Other:          0
>      Combined:       2
>      Current hardware settings:
>      RX:             0
>      TX:             0
>      Other:          0
>      Combined:       2
>
>      [root@dpdk-kvm ~]# ifconfig eth0
>      eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>              inet 192.168.100.11  netmask 255.255.255.0  broadcast 192.168.100.255
>              inet6 fe80::5054:ff:fe12:3459  prefixlen 64  scopeid 0x20<link>
>              ether 52:54:00:12:34:59  txqueuelen 1000  (Ethernet)
>              RX packets 56  bytes 5166 (5.0 KiB)
>              RX errors 0  dropped 0  overruns 0  frame 0
>              TX packets 84  bytes 8303 (8.1 KiB)
>              TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
>      [root@dpdk-kvm ~]# ping 192.168.100.10
>      PING 192.168.100.10 (192.168.100.10) 56(84) bytes of data.
>      64 bytes from 192.168.100.10: icmp_seq=1 ttl=64 time=0.213 ms
>      64 bytes from 192.168.100.10: icmp_seq=2 ttl=64 time=0.094 ms
>      64 bytes from 192.168.100.10: icmp_seq=3 ttl=64 time=0.246 ms
>      64 bytes from 192.168.100.10: icmp_seq=4 ttl=64 time=0.153 ms
>      64 bytes from 192.168.100.10: icmp_seq=5 ttl=64 time=0.104 ms
>      ^C
>>
>> If yes, please let me know and I'll go over MQ enabling.
>
> I'm just wondering why it doesn't work on your side.

Hi,

This is working also for me, but without enabling the MQ. (ethtool -L eth0 combined n (n>1) )
The problem starts when I am applying the patches and I enable MQ. (Need a slightly different QEMU commandline)

>
>>
>>> I had a very rough testing based on your test guides, I indeed found
>>> an issue: the IP address assigned by "ifconfig" disappears soon in the
>>> first few times and after about 2 or 3 times reset, it never changes.
>>>
>>> (well, I saw that quite few times before while trying different QEMU
>>> net devices. So, it might be a system configuration issue, or something
>>> else?)
>>>
>>
>> You are right, this is a guest config issue, I think you should disable NetworkManager
>
> Yeah, I figured it out by my self, and it worked when I hardcoded it at
> /etc/sysconfig/network-scripts/ifcfg-eth0.
>
>> for static IP addresses. Please use only the virtio-net device.
>>
>> You cant try this:
>> sudo systemctl stop NetworkManager
>> sudo systemctl disable NetworkManager
>
> Thanks for the info and tip!
>
>>
>>> Besides that, it works, say, I can wget a big file from host.
>>>
>>
>> The target here is traffic between 2 VMs.
>> We want to be able to ping (for example) between VMS when MQ > 1 is enabled on both guests:
>> - ethtool -L eth0 combined <queues nr, the same as QEMU>
>
> As you can see from my command log, I did so and it worked :)
>

Let me understand, it worked after applying MQ patches on all 3 projects (DPDK, QEMU and OVS)?
It worked with MQ enabled? MQ >1 ?

You can be sure by using the following command in one of the VMs:
   cat /proc/interrupts | grep virtio
and see that you have interrupts for all virtio0-input.0/1/...


Thanks,
Marcel

>>
>> Thank you again for the involvement, this is very much appreciated!
>
> Welcome! I need fix it if there is a bug.
>
> 	--yliu
>

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Yuanhan Liu]

On Tue, Sep 22, 2015 at 11:47:34AM +0300, Marcel Apfelbaum wrote:
> On 09/22/2015 11:34 AM, Yuanhan Liu wrote:
> >On Tue, Sep 22, 2015 at 11:10:13AM +0300, Marcel Apfelbaum wrote:
> >>On 09/22/2015 10:31 AM, Yuanhan Liu wrote:
> >>>On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
> >>[...]
> >>>>>
> >>>>>Hi,
> >>>>>
> >>>>>I have made 4 cleanup patches few weeks before, including the patch
> >>>>>to define kickfd and callfd as int type, and they have already got
> >>>>>the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
> >>>>>they will be merged, hence I made this patchset based on them.
> >>>>>
> >>>>>This will also answer the question from your another email: can't
> >>>>>apply.
> >>>>
> >>>>Hi,
> >>>>Thank you for the response, it makes sense now.
> >>>>
> >>>>T have another issue, maybe you can help.
> >>>>I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
> >>>>
> >>>>I am using a simple setup:
> >>>>     http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
> >>>>that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
> >>>>
> >>>>The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
> >>>>once I set queues=n in guest.
> >>>
> >>>Hi,
> >>>
> >>>Could you be more specific about that? It also would be helpful if you
> >>>could tell me the steps, besides those setup steps you mentioned in the
> >>>qemu wiki and this email, you did for testing.
> >>>
> >>
> >>Hi,
> >>Thank you for your help.
> >>
> >>I am sorry the wiki is not enough, I'll be happy to add all the missing parts.
> >>In the meantime maybe you can tell me where the problem is, I also suggest to
> >>post here the output of journalctl command.
> >>
> >>We only need a regular machine and we want traffic between 2 VMs. I'll try to summarize the steps:
> >>
> >>1. Be sure you have enough hugepages enabled (2M pages are enough) and mounted.
> >>2. Configure and start OVS following the wiki
> >>    - we only want one bridge with 2 dpdkvhostuser ports.
> >>3. Start VMs using the wiki command line
> >>    - check journalctl for possible errors. You can use
> >>         journalctl  --since `date +%T --date="-10 minutes"`
> >>      to see only last 10 minutes.
> >>4. Configure the guests IPs.
> >>    - Disable the Network Manager as described bellow in the mail.
> >>5. At this point you should be able to ping between guests.
> >>
> >>Please let me know if you have any problem until this point.
> >>I'll be happy to help. Please point any special steps you made that
> >>are not in the WIKI. The journalctl logs would also help.
> >>
> >>Does the ping between VMS work now?
> >
> >Yes, it works, too. I can ping the other vm inside a vm.
> >
> >     [root@dpdk-kvm ~]# ethtool -l eth0
> >     Channel parameters for eth0:
> >     Pre-set maximums:
> >     RX:             0
> >     TX:             0
> >     Other:          0
> >     Combined:       2
> >     Current hardware settings:
> >     RX:             0
> >     TX:             0
> >     Other:          0
> >     Combined:       2
> >
> >     [root@dpdk-kvm ~]# ifconfig eth0
> >     eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
> >             inet 192.168.100.11  netmask 255.255.255.0  broadcast 192.168.100.255
> >             inet6 fe80::5054:ff:fe12:3459  prefixlen 64  scopeid 0x20<link>
> >             ether 52:54:00:12:34:59  txqueuelen 1000  (Ethernet)
> >             RX packets 56  bytes 5166 (5.0 KiB)
> >             RX errors 0  dropped 0  overruns 0  frame 0
> >             TX packets 84  bytes 8303 (8.1 KiB)
> >             TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> >
> >     [root@dpdk-kvm ~]# ping 192.168.100.10
> >     PING 192.168.100.10 (192.168.100.10) 56(84) bytes of data.
> >     64 bytes from 192.168.100.10: icmp_seq=1 ttl=64 time=0.213 ms
> >     64 bytes from 192.168.100.10: icmp_seq=2 ttl=64 time=0.094 ms
> >     64 bytes from 192.168.100.10: icmp_seq=3 ttl=64 time=0.246 ms
> >     64 bytes from 192.168.100.10: icmp_seq=4 ttl=64 time=0.153 ms
> >     64 bytes from 192.168.100.10: icmp_seq=5 ttl=64 time=0.104 ms
> >     ^C
> >>
> >>If yes, please let me know and I'll go over MQ enabling.
> >
> >I'm just wondering why it doesn't work on your side.
> 
> Hi,
> 
> This is working also for me, but without enabling the MQ. (ethtool -L eth0 combined n (n>1) )
> The problem starts when I am applying the patches and I enable MQ. (Need a slightly different QEMU commandline)
> 
> >
> >>
> >>>I had a very rough testing based on your test guides, I indeed found
> >>>an issue: the IP address assigned by "ifconfig" disappears soon in the
> >>>first few times and after about 2 or 3 times reset, it never changes.
> >>>
> >>>(well, I saw that quite few times before while trying different QEMU
> >>>net devices. So, it might be a system configuration issue, or something
> >>>else?)
> >>>
> >>
> >>You are right, this is a guest config issue, I think you should disable NetworkManager
> >
> >Yeah, I figured it out by my self, and it worked when I hardcoded it at
> >/etc/sysconfig/network-scripts/ifcfg-eth0.
> >
> >>for static IP addresses. Please use only the virtio-net device.
> >>
> >>You cant try this:
> >>sudo systemctl stop NetworkManager
> >>sudo systemctl disable NetworkManager
> >
> >Thanks for the info and tip!
> >
> >>
> >>>Besides that, it works, say, I can wget a big file from host.
> >>>
> >>
> >>The target here is traffic between 2 VMs.
> >>We want to be able to ping (for example) between VMS when MQ > 1 is enabled on both guests:
> >>- ethtool -L eth0 combined <queues nr, the same as QEMU>
> >
> >As you can see from my command log, I did so and it worked :)
> >
> 
> Let me understand, it worked after applying MQ patches on all 3 projects (DPDK, QEMU and OVS)?
> It worked with MQ enabled? MQ >1 ?

Yes, however, I tried few more times this time, and found it sometimes
worked, and sometimes not. Sounds like there is a bug somewhere.

> 
> You can be sure by using the following command in one of the VMs:
>   cat /proc/interrupts | grep virtio
> and see that you have interrupts for all virtio0-input.0/1/...

     [root@dpdk-kvm ~]# cat /proc/interrupts | grep virtio
     24:        0        0    PCI-MSI-edge       virtio0-config
     25:      425        0    PCI-MSI-edge       virtio0-virtqueues


BTW, I have seen some warnings from ovs:

    2015-09-22T02:08:58Z|00003|ofproto_dpif_upcall(pmd45)|WARN|upcall_cb failure: ukey installation fails
    
    2015-09-22T02:11:05Z|00003|ofproto_dpif_upcall(pmd44)|WARN|Dropped 29 log messages in last 127 seconds (most recently, 82 seconds ago) due to excessive rate
    2015-09-22T02:11:05Z|00004|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
    2015-09-22T02:12:17Z|00005|ofproto_dpif_upcall(pmd44)|WARN|Dropped 11 log messages in last 32 seconds (most recently, 14 seconds ago) due to excessive rate
    2015-09-22T02:12:17Z|00006|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
    2015-09-22T02:14:59Z|00007|ofproto_dpif_upcall(pmd44)|WARN|Dropped 2 log messages in last 161 seconds (most recently, 161 seconds ago) due to excessive rate
    2015-09-22T02:14:59Z|00008|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
    

Does that look abnormal to you?

Anyway, I here check if there is anything I can fix.

	--yliu

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Marcel Apfelbaum]

On 09/22/2015 12:21 PM, Yuanhan Liu wrote:
> On Tue, Sep 22, 2015 at 11:47:34AM +0300, Marcel Apfelbaum wrote:
>> On 09/22/2015 11:34 AM, Yuanhan Liu wrote:
>>> On Tue, Sep 22, 2015 at 11:10:13AM +0300, Marcel Apfelbaum wrote:
>>>> On 09/22/2015 10:31 AM, Yuanhan Liu wrote:
>>>>> On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
>>>> [...]
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I have made 4 cleanup patches few weeks before, including the patch
>>>>>>> to define kickfd and callfd as int type, and they have already got
>>>>>>> the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
>>>>>>> they will be merged, hence I made this patchset based on them.
>>>>>>>
>>>>>>> This will also answer the question from your another email: can't
>>>>>>> apply.
>>>>>>
>>>>>> Hi,
>>>>>> Thank you for the response, it makes sense now.
>>>>>>
>>>>>> T have another issue, maybe you can help.
>>>>>> I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
>>>>>>
>>>>>> I am using a simple setup:
>>>>>>      http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
>>>>>> that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
>>>>>>
>>>>>> The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
>>>>>> once I set queues=n in guest.
>>>>>
>>>>> Hi,
>>>>>
>>>>> Could you be more specific about that? It also would be helpful if you
>>>>> could tell me the steps, besides those setup steps you mentioned in the
>>>>> qemu wiki and this email, you did for testing.
>>>>>
>>>>
>>>> Hi,
>>>> Thank you for your help.
>>>>
>>>> I am sorry the wiki is not enough, I'll be happy to add all the missing parts.
>>>> In the meantime maybe you can tell me where the problem is, I also suggest to
>>>> post here the output of journalctl command.
>>>>
>>>> We only need a regular machine and we want traffic between 2 VMs. I'll try to summarize the steps:
>>>>
>>>> 1. Be sure you have enough hugepages enabled (2M pages are enough) and mounted.
>>>> 2. Configure and start OVS following the wiki
>>>>     - we only want one bridge with 2 dpdkvhostuser ports.
>>>> 3. Start VMs using the wiki command line
>>>>     - check journalctl for possible errors. You can use
>>>>          journalctl  --since `date +%T --date="-10 minutes"`
>>>>       to see only last 10 minutes.
>>>> 4. Configure the guests IPs.
>>>>     - Disable the Network Manager as described bellow in the mail.
>>>> 5. At this point you should be able to ping between guests.
>>>>
>>>> Please let me know if you have any problem until this point.
>>>> I'll be happy to help. Please point any special steps you made that
>>>> are not in the WIKI. The journalctl logs would also help.
>>>>
>>>> Does the ping between VMS work now?
>>>
>>> Yes, it works, too. I can ping the other vm inside a vm.
>>>
>>>      [root@dpdk-kvm ~]# ethtool -l eth0
>>>      Channel parameters for eth0:
>>>      Pre-set maximums:
>>>      RX:             0
>>>      TX:             0
>>>      Other:          0
>>>      Combined:       2
>>>      Current hardware settings:
>>>      RX:             0
>>>      TX:             0
>>>      Other:          0
>>>      Combined:       2
>>>
>>>      [root@dpdk-kvm ~]# ifconfig eth0
>>>      eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>>>              inet 192.168.100.11  netmask 255.255.255.0  broadcast 192.168.100.255
>>>              inet6 fe80::5054:ff:fe12:3459  prefixlen 64  scopeid 0x20<link>
>>>              ether 52:54:00:12:34:59  txqueuelen 1000  (Ethernet)
>>>              RX packets 56  bytes 5166 (5.0 KiB)
>>>              RX errors 0  dropped 0  overruns 0  frame 0
>>>              TX packets 84  bytes 8303 (8.1 KiB)
>>>              TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>>>
>>>      [root@dpdk-kvm ~]# ping 192.168.100.10
>>>      PING 192.168.100.10 (192.168.100.10) 56(84) bytes of data.
>>>      64 bytes from 192.168.100.10: icmp_seq=1 ttl=64 time=0.213 ms
>>>      64 bytes from 192.168.100.10: icmp_seq=2 ttl=64 time=0.094 ms
>>>      64 bytes from 192.168.100.10: icmp_seq=3 ttl=64 time=0.246 ms
>>>      64 bytes from 192.168.100.10: icmp_seq=4 ttl=64 time=0.153 ms
>>>      64 bytes from 192.168.100.10: icmp_seq=5 ttl=64 time=0.104 ms
>>>      ^C
>>>>
>>>> If yes, please let me know and I'll go over MQ enabling.
>>>
>>> I'm just wondering why it doesn't work on your side.
>>
>> Hi,
>>
>> This is working also for me, but without enabling the MQ. (ethtool -L eth0 combined n (n>1) )
>> The problem starts when I am applying the patches and I enable MQ. (Need a slightly different QEMU commandline)
>>
>>>
>>>>
>>>>> I had a very rough testing based on your test guides, I indeed found
>>>>> an issue: the IP address assigned by "ifconfig" disappears soon in the
>>>>> first few times and after about 2 or 3 times reset, it never changes.
>>>>>
>>>>> (well, I saw that quite few times before while trying different QEMU
>>>>> net devices. So, it might be a system configuration issue, or something
>>>>> else?)
>>>>>
>>>>
>>>> You are right, this is a guest config issue, I think you should disable NetworkManager
>>>
>>> Yeah, I figured it out by my self, and it worked when I hardcoded it at
>>> /etc/sysconfig/network-scripts/ifcfg-eth0.
>>>
>>>> for static IP addresses. Please use only the virtio-net device.
>>>>
>>>> You cant try this:
>>>> sudo systemctl stop NetworkManager
>>>> sudo systemctl disable NetworkManager
>>>
>>> Thanks for the info and tip!
>>>
>>>>
>>>>> Besides that, it works, say, I can wget a big file from host.
>>>>>
>>>>
>>>> The target here is traffic between 2 VMs.
>>>> We want to be able to ping (for example) between VMS when MQ > 1 is enabled on both guests:
>>>> - ethtool -L eth0 combined <queues nr, the same as QEMU>
>>>
>>> As you can see from my command log, I did so and it worked :)
>>>
>>
>> Let me understand, it worked after applying MQ patches on all 3 projects (DPDK, QEMU and OVS)?
>> It worked with MQ enabled? MQ >1 ?
>
> Yes, however, I tried few more times this time, and found it sometimes
> worked, and sometimes not. Sounds like there is a bug somewhere.
>

Yes, I've been hunting it since you submitted the series :)

>>
>> You can be sure by using the following command in one of the VMs:
>>    cat /proc/interrupts | grep virtio
>> and see that you have interrupts for all virtio0-input.0/1/...
>
>       [root@dpdk-kvm ~]# cat /proc/interrupts | grep virtio
>       24:        0        0    PCI-MSI-edge       virtio0-config
>       25:      425        0    PCI-MSI-edge       virtio0-virtqueues
>

Here it shows that MQ is not enabled in the guest.
For queues=2 in qemu commandline and  'ethtool -L eth0 combined 2' in guest you should see:

  24:          0          0          0          0   PCI-MSI 65536-edge      virtio0-config
  25:         32          0         14          0   PCI-MSI 65537-edge      virtio0-input.0
  26:          1          0          0          0   PCI-MSI 65538-edge      virtio0-output.0
  27:         53          0          0          0   PCI-MSI 65539-edge      virtio0-input.1
  28:          1          0          0          0   PCI-MSI 65540-edge      virtio0-output.1


So, you are very close to reproduce the MQ bug:
Please ensure:
1. You have applied MQ patches to QEMU/DPDK
2. You applies the MQ patch to *OVS*:
    https://www.mail-archive.com/dev@openvswitch.org/msg49198.html
    - It does not apply correctly, just remove the chunk with the "if" statement that it fails to compile
3. Configure OVS for 2 queues:
   - ovs-vsctl set Open_vSwitch . other_config:n-dpdk-rxqs=2
   - ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=0xff00
4. Enable MQ on virtio-net device:
    -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=2 \
    -device virtio-net-pci,netdev=mynet1,mac=52:54:00:02:d9:$2,mq=on,vectors=8 \

At this stage you should still have ping working between VMS.

However, when running on both VMs:
    ethtool -L eth0 combined 2
traffic stops...

Thanks again for the help!

>
> BTW, I have seen some warnings from ovs:
>
>      2015-09-22T02:08:58Z|00003|ofproto_dpif_upcall(pmd45)|WARN|upcall_cb failure: ukey installation fails
>
>      2015-09-22T02:11:05Z|00003|ofproto_dpif_upcall(pmd44)|WARN|Dropped 29 log messages in last 127 seconds (most recently, 82 seconds ago) due to excessive rate
>      2015-09-22T02:11:05Z|00004|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
>      2015-09-22T02:12:17Z|00005|ofproto_dpif_upcall(pmd44)|WARN|Dropped 11 log messages in last 32 seconds (most recently, 14 seconds ago) due to excessive rate
>      2015-09-22T02:12:17Z|00006|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
>      2015-09-22T02:14:59Z|00007|ofproto_dpif_upcall(pmd44)|WARN|Dropped 2 log messages in last 161 seconds (most recently, 161 seconds ago) due to excessive rate
>      2015-09-22T02:14:59Z|00008|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
>
>
> Does that look abnormal to you?

Nope, but since you have ping between VMS it should not bother
>
> Anyway, I here check if there is anything I can fix.
Thanks!!!

Marcel
>
> 	--yliu
>

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Yuanhan Liu]

On Tue, Sep 22, 2015 at 01:06:17PM +0300, Marcel Apfelbaum wrote:
> On 09/22/2015 12:21 PM, Yuanhan Liu wrote:
> >On Tue, Sep 22, 2015 at 11:47:34AM +0300, Marcel Apfelbaum wrote:
> >>On 09/22/2015 11:34 AM, Yuanhan Liu wrote:
> >>>On Tue, Sep 22, 2015 at 11:10:13AM +0300, Marcel Apfelbaum wrote:
> >>>>On 09/22/2015 10:31 AM, Yuanhan Liu wrote:
> >>>>>On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
> >>>>[...]
> >>>>>>>
> >>>>>>>Hi,
> >>>>>>>
> >>>>>>>I have made 4 cleanup patches few weeks before, including the patch
> >>>>>>>to define kickfd and callfd as int type, and they have already got
> >>>>>>>the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
> >>>>>>>they will be merged, hence I made this patchset based on them.
> >>>>>>>
> >>>>>>>This will also answer the question from your another email: can't
> >>>>>>>apply.
> >>>>>>
> >>>>>>Hi,
> >>>>>>Thank you for the response, it makes sense now.
> >>>>>>
> >>>>>>T have another issue, maybe you can help.
> >>>>>>I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
> >>>>>>
> >>>>>>I am using a simple setup:
> >>>>>>     http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
> >>>>>>that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
> >>>>>>
> >>>>>>The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
> >>>>>>once I set queues=n in guest.
> >>>>>
> >>>>>Hi,
> >>>>>
> >>>>>Could you be more specific about that? It also would be helpful if you
> >>>>>could tell me the steps, besides those setup steps you mentioned in the
> >>>>>qemu wiki and this email, you did for testing.
> >>>>>
> >>>>
> >>>>Hi,
> >>>>Thank you for your help.
> >>>>
> >>>>I am sorry the wiki is not enough, I'll be happy to add all the missing parts.
> >>>>In the meantime maybe you can tell me where the problem is, I also suggest to
> >>>>post here the output of journalctl command.
> >>>>
> >>>>We only need a regular machine and we want traffic between 2 VMs. I'll try to summarize the steps:
> >>>>
> >>>>1. Be sure you have enough hugepages enabled (2M pages are enough) and mounted.
> >>>>2. Configure and start OVS following the wiki
> >>>>    - we only want one bridge with 2 dpdkvhostuser ports.
> >>>>3. Start VMs using the wiki command line
> >>>>    - check journalctl for possible errors. You can use
> >>>>         journalctl  --since `date +%T --date="-10 minutes"`
> >>>>      to see only last 10 minutes.
> >>>>4. Configure the guests IPs.
> >>>>    - Disable the Network Manager as described bellow in the mail.
> >>>>5. At this point you should be able to ping between guests.
> >>>>
> >>>>Please let me know if you have any problem until this point.
> >>>>I'll be happy to help. Please point any special steps you made that
> >>>>are not in the WIKI. The journalctl logs would also help.
> >>>>
> >>>>Does the ping between VMS work now?
> >>>
> >>>Yes, it works, too. I can ping the other vm inside a vm.
> >>>
> >>>     [root@dpdk-kvm ~]# ethtool -l eth0
> >>>     Channel parameters for eth0:
> >>>     Pre-set maximums:
> >>>     RX:             0
> >>>     TX:             0
> >>>     Other:          0
> >>>     Combined:       2
> >>>     Current hardware settings:
> >>>     RX:             0
> >>>     TX:             0
> >>>     Other:          0
> >>>     Combined:       2
> >>>
> >>>     [root@dpdk-kvm ~]# ifconfig eth0
> >>>     eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
> >>>             inet 192.168.100.11  netmask 255.255.255.0  broadcast 192.168.100.255
> >>>             inet6 fe80::5054:ff:fe12:3459  prefixlen 64  scopeid 0x20<link>
> >>>             ether 52:54:00:12:34:59  txqueuelen 1000  (Ethernet)
> >>>             RX packets 56  bytes 5166 (5.0 KiB)
> >>>             RX errors 0  dropped 0  overruns 0  frame 0
> >>>             TX packets 84  bytes 8303 (8.1 KiB)
> >>>             TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> >>>
> >>>     [root@dpdk-kvm ~]# ping 192.168.100.10
> >>>     PING 192.168.100.10 (192.168.100.10) 56(84) bytes of data.
> >>>     64 bytes from 192.168.100.10: icmp_seq=1 ttl=64 time=0.213 ms
> >>>     64 bytes from 192.168.100.10: icmp_seq=2 ttl=64 time=0.094 ms
> >>>     64 bytes from 192.168.100.10: icmp_seq=3 ttl=64 time=0.246 ms
> >>>     64 bytes from 192.168.100.10: icmp_seq=4 ttl=64 time=0.153 ms
> >>>     64 bytes from 192.168.100.10: icmp_seq=5 ttl=64 time=0.104 ms
> >>>     ^C
> >>>>
> >>>>If yes, please let me know and I'll go over MQ enabling.
> >>>
> >>>I'm just wondering why it doesn't work on your side.
> >>
> >>Hi,
> >>
> >>This is working also for me, but without enabling the MQ. (ethtool -L eth0 combined n (n>1) )
> >>The problem starts when I am applying the patches and I enable MQ. (Need a slightly different QEMU commandline)
> >>
> >>>
> >>>>
> >>>>>I had a very rough testing based on your test guides, I indeed found
> >>>>>an issue: the IP address assigned by "ifconfig" disappears soon in the
> >>>>>first few times and after about 2 or 3 times reset, it never changes.
> >>>>>
> >>>>>(well, I saw that quite few times before while trying different QEMU
> >>>>>net devices. So, it might be a system configuration issue, or something
> >>>>>else?)
> >>>>>
> >>>>
> >>>>You are right, this is a guest config issue, I think you should disable NetworkManager
> >>>
> >>>Yeah, I figured it out by my self, and it worked when I hardcoded it at
> >>>/etc/sysconfig/network-scripts/ifcfg-eth0.
> >>>
> >>>>for static IP addresses. Please use only the virtio-net device.
> >>>>
> >>>>You cant try this:
> >>>>sudo systemctl stop NetworkManager
> >>>>sudo systemctl disable NetworkManager
> >>>
> >>>Thanks for the info and tip!
> >>>
> >>>>
> >>>>>Besides that, it works, say, I can wget a big file from host.
> >>>>>
> >>>>
> >>>>The target here is traffic between 2 VMs.
> >>>>We want to be able to ping (for example) between VMS when MQ > 1 is enabled on both guests:
> >>>>- ethtool -L eth0 combined <queues nr, the same as QEMU>
> >>>
> >>>As you can see from my command log, I did so and it worked :)
> >>>
> >>
> >>Let me understand, it worked after applying MQ patches on all 3 projects (DPDK, QEMU and OVS)?
> >>It worked with MQ enabled? MQ >1 ?
> >
> >Yes, however, I tried few more times this time, and found it sometimes
> >worked, and sometimes not. Sounds like there is a bug somewhere.

I put two quick debug printf at ovs dpdk code, and found out why it
sometimes works, and sometimes not: all data goes to the first queue
works, and otherwise, it fails.

:: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 1, enqueued: 1
:: TX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 1, enqueued: 1
:: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 1, enqueued: 1
:: TX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 1, enqueued: 1
:: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 1, enqueued: 1
:: TX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 1, enqueued: 1


And the failed ones:

:: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 1, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 1, asked: 1, enqueued: 1
:: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 1, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 1, asked: 1, enqueued: 1
:: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 1, asked: 32, dequeued: 1
:: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 1, asked: 1, enqueued: 1

You can see that vhost-user1 never transfer back packet, hence ping
didn't work.

And if you run ifconfig at the VM-1, you will find packet drops.


---

I then spent some time for figuring out why packet drops happened,
and found that the vq->vhost_hlen for second (and above) queue
pairs is set wrongly: that's why it failed if packets are not
transfered by the first queue.

What's "ironic" is that while making this patchset, I am somehow 
aware of that I missed it, and I had planned to fix it.  But I
just forgot it, and then it takes me (as well as you) some time
to figure it out, in a more painful way.

So, thank you a lot for your testing as well as the effort to
guide me on the OVS DPDK test.

It's proved to work after the fix (at least in my testing), but
it's late here and I'm gonna send a new version tomorrow, including
some other comments addressing. Please do more test then :)


	--yliu

> >
> 
> Yes, I've been hunting it since you submitted the series :)
> 
> >>
> >>You can be sure by using the following command in one of the VMs:
> >>   cat /proc/interrupts | grep virtio
> >>and see that you have interrupts for all virtio0-input.0/1/...
> >
> >      [root@dpdk-kvm ~]# cat /proc/interrupts | grep virtio
> >      24:        0        0    PCI-MSI-edge       virtio0-config
> >      25:      425        0    PCI-MSI-edge       virtio0-virtqueues
> >
> 
> Here it shows that MQ is not enabled in the guest.
> For queues=2 in qemu commandline and  'ethtool -L eth0 combined 2' in guest you should see:
> 
>  24:          0          0          0          0   PCI-MSI 65536-edge      virtio0-config
>  25:         32          0         14          0   PCI-MSI 65537-edge      virtio0-input.0
>  26:          1          0          0          0   PCI-MSI 65538-edge      virtio0-output.0
>  27:         53          0          0          0   PCI-MSI 65539-edge      virtio0-input.1
>  28:          1          0          0          0   PCI-MSI 65540-edge      virtio0-output.1
> 
> 
> So, you are very close to reproduce the MQ bug:
> Please ensure:
> 1. You have applied MQ patches to QEMU/DPDK
> 2. You applies the MQ patch to *OVS*:
>    https://www.mail-archive.com/dev@openvswitch.org/msg49198.html
>    - It does not apply correctly, just remove the chunk with the "if" statement that it fails to compile
> 3. Configure OVS for 2 queues:
>   - ovs-vsctl set Open_vSwitch . other_config:n-dpdk-rxqs=2
>   - ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=0xff00
> 4. Enable MQ on virtio-net device:
>    -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=2 \
>    -device virtio-net-pci,netdev=mynet1,mac=52:54:00:02:d9:$2,mq=on,vectors=8 \
> 
> At this stage you should still have ping working between VMS.
> 
> However, when running on both VMs:
>    ethtool -L eth0 combined 2
> traffic stops...
> 
> Thanks again for the help!
> 
> >
> >BTW, I have seen some warnings from ovs:
> >
> >     2015-09-22T02:08:58Z|00003|ofproto_dpif_upcall(pmd45)|WARN|upcall_cb failure: ukey installation fails
> >
> >     2015-09-22T02:11:05Z|00003|ofproto_dpif_upcall(pmd44)|WARN|Dropped 29 log messages in last 127 seconds (most recently, 82 seconds ago) due to excessive rate
> >     2015-09-22T02:11:05Z|00004|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
> >     2015-09-22T02:12:17Z|00005|ofproto_dpif_upcall(pmd44)|WARN|Dropped 11 log messages in last 32 seconds (most recently, 14 seconds ago) due to excessive rate
> >     2015-09-22T02:12:17Z|00006|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
> >     2015-09-22T02:14:59Z|00007|ofproto_dpif_upcall(pmd44)|WARN|Dropped 2 log messages in last 161 seconds (most recently, 161 seconds ago) due to excessive rate
> >     2015-09-22T02:14:59Z|00008|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
> >
> >
> >Does that look abnormal to you?
> 
> Nope, but since you have ping between VMS it should not bother
> >
> >Anyway, I here check if there is anything I can fix.
> Thanks!!!
> 
> Marcel
> >
> >	--yliu
> >

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Marcel Apfelbaum]

On 09/22/2015 05:22 PM, Yuanhan Liu wrote:
> On Tue, Sep 22, 2015 at 01:06:17PM +0300, Marcel Apfelbaum wrote:
>> On 09/22/2015 12:21 PM, Yuanhan Liu wrote:
>>> On Tue, Sep 22, 2015 at 11:47:34AM +0300, Marcel Apfelbaum wrote:
>>>> On 09/22/2015 11:34 AM, Yuanhan Liu wrote:
>>>>> On Tue, Sep 22, 2015 at 11:10:13AM +0300, Marcel Apfelbaum wrote:
>>>>>> On 09/22/2015 10:31 AM, Yuanhan Liu wrote:
>>>>>>> On Mon, Sep 21, 2015 at 08:56:30PM +0300, Marcel Apfelbaum wrote:
>>>>>> [...]
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I have made 4 cleanup patches few weeks before, including the patch
>>>>>>>>> to define kickfd and callfd as int type, and they have already got
>>>>>>>>> the ACK from Huawei Xie, and Chuangchun Ouyang. It's likely that
>>>>>>>>> they will be merged, hence I made this patchset based on them.
>>>>>>>>>
>>>>>>>>> This will also answer the question from your another email: can't
>>>>>>>>> apply.
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>> Thank you for the response, it makes sense now.
>>>>>>>>
>>>>>>>> T have another issue, maybe you can help.
>>>>>>>> I have some problems making it work with OVS/DPDK backend and virtio-net driver in guest.
>>>>>>>>
>>>>>>>> I am using a simple setup:
>>>>>>>>      http://wiki.qemu.org/Features/vhost-user-ovs-dpdk
>>>>>>>> that connects 2 VMs using OVS's dpdkvhostuser ports (regular virtio-net driver in guest, not the PMD driver).
>>>>>>>>
>>>>>>>> The setup worked fine with the prev DPDK MQ implementation (V4), however on this one the traffic stops
>>>>>>>> once I set queues=n in guest.
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Could you be more specific about that? It also would be helpful if you
>>>>>>> could tell me the steps, besides those setup steps you mentioned in the
>>>>>>> qemu wiki and this email, you did for testing.
>>>>>>>
>>>>>>
>>>>>> Hi,
>>>>>> Thank you for your help.
>>>>>>
>>>>>> I am sorry the wiki is not enough, I'll be happy to add all the missing parts.
>>>>>> In the meantime maybe you can tell me where the problem is, I also suggest to
>>>>>> post here the output of journalctl command.
>>>>>>
>>>>>> We only need a regular machine and we want traffic between 2 VMs. I'll try to summarize the steps:
>>>>>>
>>>>>> 1. Be sure you have enough hugepages enabled (2M pages are enough) and mounted.
>>>>>> 2. Configure and start OVS following the wiki
>>>>>>     - we only want one bridge with 2 dpdkvhostuser ports.
>>>>>> 3. Start VMs using the wiki command line
>>>>>>     - check journalctl for possible errors. You can use
>>>>>>          journalctl  --since `date +%T --date="-10 minutes"`
>>>>>>       to see only last 10 minutes.
>>>>>> 4. Configure the guests IPs.
>>>>>>     - Disable the Network Manager as described bellow in the mail.
>>>>>> 5. At this point you should be able to ping between guests.
>>>>>>
>>>>>> Please let me know if you have any problem until this point.
>>>>>> I'll be happy to help. Please point any special steps you made that
>>>>>> are not in the WIKI. The journalctl logs would also help.
>>>>>>
>>>>>> Does the ping between VMS work now?
>>>>>
>>>>> Yes, it works, too. I can ping the other vm inside a vm.
>>>>>
>>>>>      [root@dpdk-kvm ~]# ethtool -l eth0
>>>>>      Channel parameters for eth0:
>>>>>      Pre-set maximums:
>>>>>      RX:             0
>>>>>      TX:             0
>>>>>      Other:          0
>>>>>      Combined:       2
>>>>>      Current hardware settings:
>>>>>      RX:             0
>>>>>      TX:             0
>>>>>      Other:          0
>>>>>      Combined:       2
>>>>>
>>>>>      [root@dpdk-kvm ~]# ifconfig eth0
>>>>>      eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>>>>>              inet 192.168.100.11  netmask 255.255.255.0  broadcast 192.168.100.255
>>>>>              inet6 fe80::5054:ff:fe12:3459  prefixlen 64  scopeid 0x20<link>
>>>>>              ether 52:54:00:12:34:59  txqueuelen 1000  (Ethernet)
>>>>>              RX packets 56  bytes 5166 (5.0 KiB)
>>>>>              RX errors 0  dropped 0  overruns 0  frame 0
>>>>>              TX packets 84  bytes 8303 (8.1 KiB)
>>>>>              TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>>>>>
>>>>>      [root@dpdk-kvm ~]# ping 192.168.100.10
>>>>>      PING 192.168.100.10 (192.168.100.10) 56(84) bytes of data.
>>>>>      64 bytes from 192.168.100.10: icmp_seq=1 ttl=64 time=0.213 ms
>>>>>      64 bytes from 192.168.100.10: icmp_seq=2 ttl=64 time=0.094 ms
>>>>>      64 bytes from 192.168.100.10: icmp_seq=3 ttl=64 time=0.246 ms
>>>>>      64 bytes from 192.168.100.10: icmp_seq=4 ttl=64 time=0.153 ms
>>>>>      64 bytes from 192.168.100.10: icmp_seq=5 ttl=64 time=0.104 ms
>>>>>      ^C
>>>>>>
>>>>>> If yes, please let me know and I'll go over MQ enabling.
>>>>>
>>>>> I'm just wondering why it doesn't work on your side.
>>>>
>>>> Hi,
>>>>
>>>> This is working also for me, but without enabling the MQ. (ethtool -L eth0 combined n (n>1) )
>>>> The problem starts when I am applying the patches and I enable MQ. (Need a slightly different QEMU commandline)
>>>>
>>>>>
>>>>>>
>>>>>>> I had a very rough testing based on your test guides, I indeed found
>>>>>>> an issue: the IP address assigned by "ifconfig" disappears soon in the
>>>>>>> first few times and after about 2 or 3 times reset, it never changes.
>>>>>>>
>>>>>>> (well, I saw that quite few times before while trying different QEMU
>>>>>>> net devices. So, it might be a system configuration issue, or something
>>>>>>> else?)
>>>>>>>
>>>>>>
>>>>>> You are right, this is a guest config issue, I think you should disable NetworkManager
>>>>>
>>>>> Yeah, I figured it out by my self, and it worked when I hardcoded it at
>>>>> /etc/sysconfig/network-scripts/ifcfg-eth0.
>>>>>
>>>>>> for static IP addresses. Please use only the virtio-net device.
>>>>>>
>>>>>> You cant try this:
>>>>>> sudo systemctl stop NetworkManager
>>>>>> sudo systemctl disable NetworkManager
>>>>>
>>>>> Thanks for the info and tip!
>>>>>
>>>>>>
>>>>>>> Besides that, it works, say, I can wget a big file from host.
>>>>>>>
>>>>>>
>>>>>> The target here is traffic between 2 VMs.
>>>>>> We want to be able to ping (for example) between VMS when MQ > 1 is enabled on both guests:
>>>>>> - ethtool -L eth0 combined <queues nr, the same as QEMU>
>>>>>
>>>>> As you can see from my command log, I did so and it worked :)
>>>>>
>>>>
>>>> Let me understand, it worked after applying MQ patches on all 3 projects (DPDK, QEMU and OVS)?
>>>> It worked with MQ enabled? MQ >1 ?
>>>
>>> Yes, however, I tried few more times this time, and found it sometimes
>>> worked, and sometimes not. Sounds like there is a bug somewhere.
>
> I put two quick debug printf at ovs dpdk code, and found out why it
> sometimes works, and sometimes not: all data goes to the first queue
> works, and otherwise, it fails.
>

I saw this, yes, but I couldn't understand why.

> :: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 1, enqueued: 1
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 1, enqueued: 1
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 1, enqueued: 1
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 1, enqueued: 1
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 1, enqueued: 1
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 0, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 0, asked: 1, enqueued: 1
>
>
> And the failed ones:
>
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 1, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 1, asked: 1, enqueued: 1
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 1, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 1, asked: 1, enqueued: 1
> :: TX: vhost-dev: /var/run/openvswitch/vhost-user2, qp_index: 1, asked: 32, dequeued: 1
> :: RX: vhost-dev: /var/run/openvswitch/vhost-user1, qp_index: 1, asked: 1, enqueued: 1
>
> You can see that vhost-user1 never transfer back packet, hence ping
> didn't work.
>
> And if you run ifconfig at the VM-1, you will find packet drops.
>
>
> ---
>
> I then spent some time for figuring out why packet drops happened,
> and found that the vq->vhost_hlen for second (and above) queue
> pairs is set wrongly: that's why it failed if packets are not
> transfered by the first queue.

I saw that sometimes with the DEBUG data = ON, it shows HEADER = 0,
sadly my virtio knowledge is rather limited  and I couldn't make
the connection with vhost_hlen.

Since I saw is not going anywhere for a while I asked your help :)

>
> What's "ironic" is that while making this patchset, I am somehow
> aware of that I missed it, and I had planned to fix it.  But I
> just forgot it, and then it takes me (as well as you) some time
> to figure it out, in a more painful way.

Same old, same old ...
>
> So, thank you a lot for your testing as well as the effort to
> guide me on the OVS DPDK test.
>
No problem. Thank you for investing your time in it!

> It's proved to work after the fix (at least in my testing), but
> it's late here and I'm gonna send a new version tomorrow, including
> some other comments addressing. Please do more test then :)
>

Those are very good news!
Tomorrow we have holidays but the day after that I'll try it for sure.

Thanks again and good night!
Marcel

>
> 	--yliu
>
>>>
>>
>> Yes, I've been hunting it since you submitted the series :)
>>
>>>>
>>>> You can be sure by using the following command in one of the VMs:
>>>>    cat /proc/interrupts | grep virtio
>>>> and see that you have interrupts for all virtio0-input.0/1/...
>>>
>>>       [root@dpdk-kvm ~]# cat /proc/interrupts | grep virtio
>>>       24:        0        0    PCI-MSI-edge       virtio0-config
>>>       25:      425        0    PCI-MSI-edge       virtio0-virtqueues
>>>
>>
>> Here it shows that MQ is not enabled in the guest.
>> For queues=2 in qemu commandline and  'ethtool -L eth0 combined 2' in guest you should see:
>>
>>   24:          0          0          0          0   PCI-MSI 65536-edge      virtio0-config
>>   25:         32          0         14          0   PCI-MSI 65537-edge      virtio0-input.0
>>   26:          1          0          0          0   PCI-MSI 65538-edge      virtio0-output.0
>>   27:         53          0          0          0   PCI-MSI 65539-edge      virtio0-input.1
>>   28:          1          0          0          0   PCI-MSI 65540-edge      virtio0-output.1
>>
>>
>> So, you are very close to reproduce the MQ bug:
>> Please ensure:
>> 1. You have applied MQ patches to QEMU/DPDK
>> 2. You applies the MQ patch to *OVS*:
>>     https://www.mail-archive.com/dev@openvswitch.org/msg49198.html
>>     - It does not apply correctly, just remove the chunk with the "if" statement that it fails to compile
>> 3. Configure OVS for 2 queues:
>>    - ovs-vsctl set Open_vSwitch . other_config:n-dpdk-rxqs=2
>>    - ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=0xff00
>> 4. Enable MQ on virtio-net device:
>>     -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=2 \
>>     -device virtio-net-pci,netdev=mynet1,mac=52:54:00:02:d9:$2,mq=on,vectors=8 \
>>
>> At this stage you should still have ping working between VMS.
>>
>> However, when running on both VMs:
>>     ethtool -L eth0 combined 2
>> traffic stops...
>>
>> Thanks again for the help!
>>
>>>
>>> BTW, I have seen some warnings from ovs:
>>>
>>>      2015-09-22T02:08:58Z|00003|ofproto_dpif_upcall(pmd45)|WARN|upcall_cb failure: ukey installation fails
>>>
>>>      2015-09-22T02:11:05Z|00003|ofproto_dpif_upcall(pmd44)|WARN|Dropped 29 log messages in last 127 seconds (most recently, 82 seconds ago) due to excessive rate
>>>      2015-09-22T02:11:05Z|00004|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
>>>      2015-09-22T02:12:17Z|00005|ofproto_dpif_upcall(pmd44)|WARN|Dropped 11 log messages in last 32 seconds (most recently, 14 seconds ago) due to excessive rate
>>>      2015-09-22T02:12:17Z|00006|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
>>>      2015-09-22T02:14:59Z|00007|ofproto_dpif_upcall(pmd44)|WARN|Dropped 2 log messages in last 161 seconds (most recently, 161 seconds ago) due to excessive rate
>>>      2015-09-22T02:14:59Z|00008|ofproto_dpif_upcall(pmd44)|WARN|upcall_cb failure: ukey installation fails
>>>
>>>
>>> Does that look abnormal to you?
>>
>> Nope, but since you have ping between VMS it should not bother
>>>
>>> Anyway, I here check if there is anything I can fix.
>> Thanks!!!
>>
>> Marcel
>>>
>>> 	--yliu
>>>

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Yuanhan Liu]

[-- Attachment #1: Type: text/plain, Size: 652 bytes --]

On Tue, Sep 22, 2015 at 05:51:02PM +0300, Marcel Apfelbaum wrote:
> >It's proved to work after the fix (at least in my testing), but
> >it's late here and I'm gonna send a new version tomorrow, including
> >some other comments addressing. Please do more test then :)
> >

It's unlikely that I will send another version unless I have clear clue
how to address a comment from Michael about vring flush.

But anyway, you still could help me to prove the fix works. You can
apply the attachment on top of my old patchset, and it should work.

	--yliu
> 
> Those are very good news!
> Tomorrow we have holidays but the day after that I'll try it for sure.


[-- Attachment #2: diff --]
[-- Type: text/plain, Size: 1607 bytes --]

diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
index 33bdacd..d304ee6 100644
--- a/lib/librte_vhost/virtio-net.c
+++ b/lib/librte_vhost/virtio-net.c
@@ -467,6 +467,8 @@ static int
 set_features(struct vhost_device_ctx ctx, uint64_t *pu)
 {
 	struct virtio_net *dev;
+	uint16_t vhost_hlen;
+	uint16_t i;
 
 	dev = get_device(ctx);
 	if (dev == NULL)
@@ -474,27 +476,26 @@ set_features(struct vhost_device_ctx ctx, uint64_t *pu)
 	if (*pu & ~VHOST_FEATURES)
 		return -1;
 
-	/* Store the negotiated feature list for the device. */
 	dev->features = *pu;
-
-	/* Set the vhost_hlen depending on if VIRTIO_NET_F_MRG_RXBUF is set. */
 	if (dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF)) {
 		LOG_DEBUG(VHOST_CONFIG,
 			"(%"PRIu64") Mergeable RX buffers enabled\n",
 			dev->device_fh);
-		dev->virtqueue[VIRTIO_RXQ]->vhost_hlen =
-			sizeof(struct virtio_net_hdr_mrg_rxbuf);
-		dev->virtqueue[VIRTIO_TXQ]->vhost_hlen =
-			sizeof(struct virtio_net_hdr_mrg_rxbuf);
+		vhost_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
 	} else {
 		LOG_DEBUG(VHOST_CONFIG,
 			"(%"PRIu64") Mergeable RX buffers disabled\n",
 			dev->device_fh);
-		dev->virtqueue[VIRTIO_RXQ]->vhost_hlen =
-			sizeof(struct virtio_net_hdr);
-		dev->virtqueue[VIRTIO_TXQ]->vhost_hlen =
-			sizeof(struct virtio_net_hdr);
+		vhost_hlen = sizeof(struct virtio_net_hdr);
+	}
+
+	for (i = 0; i < dev->virt_qp_nb; i++) {
+		uint16_t base_idx = i * VIRTIO_QNUM;
+
+		dev->virtqueue[base_idx + VIRTIO_RXQ]->vhost_hlen = vhost_hlen;
+		dev->virtqueue[base_idx + VIRTIO_TXQ]->vhost_hlen = vhost_hlen;
 	}
+
 	return 0;
 }
 

Re: [dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message

[Yuanhan Liu]

On Tue, Sep 22, 2015 at 10:21:22AM +0800, Yuanhan Liu wrote:
> On Mon, Sep 21, 2015 at 12:02:20PM +0300, Michael S. Tsirkin wrote:
> > On Mon, Sep 21, 2015 at 10:22:52AM +0800, Yuanhan Liu wrote:
> > > On Sun, Sep 20, 2015 at 12:37:35PM +0300, Michael S. Tsirkin wrote:
> > > > On Fri, Sep 18, 2015 at 11:10:54PM +0800, Yuanhan Liu wrote:
> > > > > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > > > > 
> > > > > This message is used to enable/disable a specific vring queue pair.
> > > > > The first queue pair is enabled by default.
> > > > > 
> > > > > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > > > > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> > > > > ---
> > > [snip...]
> > > > >  void
> > > > >  user_destroy_device(struct vhost_device_ctx ctx)
> > > > >  {
> > > > 
> > > > It might be a good idea to flush any packets being processed
> > > > on relevant cores at this point.
> > > 
> > > They are offloaded to the application (examples/vhost/vhost-switch in
> > > this case).
> > > 
> > > user_destroy_device will invoke the application's "destroy_device()"
> > > callback in the end, which, in our case, will set "remove" flag. The
> > > core worker will then drain and free the RX queue and free TX queue
> > > once the "remove" flag is set.
> > > 
> > > 	--yliu
> > 
> > 
> > Oh, I really meant user_set_vring_enable.
> 
> Will a per-vring callback help then?
> 
> We may prototype the callback to "vring_state_changed(dev, vring_index)"

It should be "vring_state_changed(dev, vring_index, enable)".

> so that the application could either, as you suggested, flushes any packets
> haven't been processed yet, or simply drops them.

After putting more thoughts on that, I guess it's also necessary to
inform the application that before receiving an "enabled" state for
a specific vring, we should never use it for data transferring, as
we just enable one queue pair by default.

And I think we could do both in vring_state_changed() callback.

Michael, what do you think of it?


	--yliu

Re: [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support

[Marcel Apfelbaum]

On 09/23/2015 06:46 AM, Yuanhan Liu wrote:
> On Tue, Sep 22, 2015 at 05:51:02PM +0300, Marcel Apfelbaum wrote:
[...]
>>> It's proved to work after the fix (at least in my testing), but
>>> it's late here and I'm gonna send a new version tomorrow, including
>>> some other comments addressing. Please do more test then :)
>>>
>
> It's unlikely that I will send another version unless I have clear clue
> how to address a comment from Michael about vring flush.

Hi,

I don't pretend to understand how exactly this works in DPDK, but since the objective
is to not have packets in vring you could:

1. Disable the vq processing of new packets. (You introduced the 'enable' flag)
2. Wait a reasonable amount of time until the processing cores
    finish dealing with current packets.
3. Check the vqs that no packets are waiting for processing.

Again, this is only a suggestion and may be incomplete (or naive).

>
> But anyway, you still could help me to prove the fix works. You can
> apply the attachment on top of my old patchset, and it should work.
>

I tested it and it works just fine!

Thanks again,
Marcel

> 	--yliu
>>
>> Those are very good news!
>> Tomorrow we have holidays but the day after that I'll try it for sure.
>

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Nikita Kalyazin]

Hi Yuanhan,


As I understand, the dead loop happened here (virtio_send_command):
while (vq->vq_used_cons_idx == vq->vq_ring.used->idx) {
      rte_rmb();
      usleep(100);
}

Could you explain why wrong config reading caused that and how correct reading helps to avoid?

-- 

Best regards,

Nikita Kalyazin,
n.kalyazin@samsung.com

Software Engineer
Virtualization Group
Samsung R&D Institute Russia
Tel: +7 (495) 797-25-00 #3816
Tel: +7 (495) 797-25-03
Office #1501, 12-1, Dvintsev str.,
Moscow, 127018, Russia

On Mon, Sep 21, 2015 at 02:36:47PM +0800, Yuanhan Liu wrote:
> On Sun, Sep 20, 2015 at 12:21:14PM +0300, Michael S. Tsirkin wrote:
> > On Fri, Sep 18, 2015 at 11:10:56PM +0800, Yuanhan Liu wrote:
> > > From: Changchun Ouyang <changchun.ouyang@intel.com>
> > > 
> > > Fix the max virtio queue pair read issue.
> > > 
> > > Control queue can't work for vhost-user mulitple queue mode,
> > > so introduce a counter to void the dead loop when polling
> > > the control queue.
> > > 
> > > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > > Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> > 
> > Per virtio spec, the multiqueue feature depends on control queue -
> > what do you mean when you say it can't work?
> > 
> > > ---
> > >  drivers/net/virtio/virtio_ethdev.c | 12 +++++++-----
> > >  1 file changed, 7 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> > > index 465d3cd..b2f4120 100644
> > > --- a/drivers/net/virtio/virtio_ethdev.c
> > > +++ b/drivers/net/virtio/virtio_ethdev.c
> > > @@ -1162,7 +1162,6 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
> > >  	struct virtio_hw *hw = eth_dev->data->dev_private;
> > >  	struct virtio_net_config *config;
> > >  	struct virtio_net_config local_config;
> > > -	uint32_t offset_conf = sizeof(config->mac);
> > >  	struct rte_pci_device *pci_dev;
> > >  
> > >  	RTE_BUILD_BUG_ON(RTE_PKTMBUF_HEADROOM < sizeof(struct virtio_net_hdr));
> > > @@ -1222,7 +1221,9 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
> > >  		config = &local_config;
> > >  
> > >  		if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) {
> > > -			offset_conf += sizeof(config->status);
> > > +			vtpci_read_dev_config(hw,
> > > +				offsetof(struct virtio_net_config, status),
> > > +				&config->status, sizeof(config->status));
> > >  		} else {
> > >  			PMD_INIT_LOG(DEBUG,
> > >  				     "VIRTIO_NET_F_STATUS is not supported");
> > > @@ -1230,15 +1231,16 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
> > >  		}
> > >  
> > >  		if (vtpci_with_feature(hw, VIRTIO_NET_F_MQ)) {
> > > -			offset_conf += sizeof(config->max_virtqueue_pairs);
> > > +			vtpci_read_dev_config(hw,
> > > +				offsetof(struct virtio_net_config, max_virtqueue_pairs),
> > > +				&config->max_virtqueue_pairs,
> > > +				sizeof(config->max_virtqueue_pairs));
> > >  		} else {
> > >  			PMD_INIT_LOG(DEBUG,
> > >  				     "VIRTIO_NET_F_MQ is not supported");
> > >  			config->max_virtqueue_pairs = 1;
> > >  		}
> > >  
> > > -		vtpci_read_dev_config(hw, 0, (uint8_t *)config, offset_conf);
> > > -
> > >  		hw->max_rx_queues =
> > >  			(VIRTIO_MAX_RX_QUEUES < config->max_virtqueue_pairs) ?
> > >  			VIRTIO_MAX_RX_QUEUES : config->max_virtqueue_pairs;
> > 
> > 
> > Does the patch actually do what the commit log says?
> 
> Sorry, the commit log is wrong as you said.
> 
> It was actually a bug in our code, which happens to be revealed when
> MQ is enabled. The old code adjusts the config bytes we want to read
> depending on what kind of features we have, but we later cast the
> entire buf we read with "struct virtio_net_config", which is obviously
> wrong.
> 
> The right way to go is to read related config bytes when corresponding
> feature is set, which is exactly what this patch does.
> 
> > It seems tobe about reading the device confing,
> > not breaking out of a loop ...
> 
> It's just a (bad) side effect of getting the vritio_net_config wrongly:
> the wrong config causes a dead loop in our code.
> 
> And sorry for the buggy commit log, will fix it next version.
> 
> Thanks.
> 
> 	--yliu

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Steffen Bauch]

On 10/08/2015 05:32 PM, Nikita Kalyazin wrote:
> Hi Yuanhan,
>
>
> As I understand, the dead loop happened here (virtio_send_command):
> while (vq->vq_used_cons_idx == vq->vq_ring.used->idx) {
>        rte_rmb();
>        usleep(100);
> }
>
> Could you explain why wrong config reading caused that and how correct reading helps to avoid?
>
Hi,

I just recognized that this dead loop is the same one that I have 
experienced (see 
http://dpdk.org/ml/archives/dev/2015-October/024737.html for reference). 
Just applying the changes in this patch (only 07/12) will not fix the 
dead loop at least in my setup.

Best regards,

Steffen

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Nikita Kalyazin]

Hi,

> I just recognized that this dead loop is the same one that I have 
> experienced (see 
> http://dpdk.org/ml/archives/dev/2015-October/024737.html for reference). 
> Just applying the changes in this patch (only 07/12) will not fix the 
> dead loop at least in my setup.
Yes, exactly. I observe it same way even after applying the patch.

-- 

Best regards,

Nikita Kalyazin,
n.kalyazin@samsung.com

Software Engineer
Virtualization Group
Samsung R&D Institute Russia
Tel: +7 (495) 797-25-00 #3816
Tel: +7 (495) 797-25-03
Office #1501, 12-1, Dvintsev str.,
Moscow, 127018, Russia

On Thu, Oct 08, 2015 at 10:51:02PM +0200, Steffen Bauch wrote:
> 
> 
> On 10/08/2015 05:32 PM, Nikita Kalyazin wrote:
> > Hi Yuanhan,
> >
> >
> > As I understand, the dead loop happened here (virtio_send_command):
> > while (vq->vq_used_cons_idx == vq->vq_ring.used->idx) {
> >        rte_rmb();
> >        usleep(100);
> > }
> >
> > Could you explain why wrong config reading caused that and how correct reading helps to avoid?
> >
> Hi,
> 
> I just recognized that this dead loop is the same one that I have 
> experienced (see 
> http://dpdk.org/ml/archives/dev/2015-October/024737.html for reference). 
> Just applying the changes in this patch (only 07/12) will not fix the 
> dead loop at least in my setup.
> 
> Best regards,
> 
> Steffen

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Yuanhan Liu]

On Thu, Oct 08, 2015 at 10:51:02PM +0200, Steffen Bauch wrote:
> 
> 
> On 10/08/2015 05:32 PM, Nikita Kalyazin wrote:
> >Hi Yuanhan,
> >
> >
> >As I understand, the dead loop happened here (virtio_send_command):
> >while (vq->vq_used_cons_idx == vq->vq_ring.used->idx) {
> >       rte_rmb();
> >       usleep(100);
> >}
> >
> >Could you explain why wrong config reading caused that and how correct reading helps to avoid?

Wrong config reading results to wrong config->max_virtqueue_pairs, which
ends up with wrong ctrl vq index being set:

    PMD: virtio_send_command(): vq->vq_queue_index = 37120

Note that you need enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT to see above
debug log.

That is to say we are waiting for the backend to consume a non-exist
queue, and that's how the dead loop comes.


> >
> Hi,
> 
> I just recognized that this dead loop is the same one that I have
> experienced (see
> http://dpdk.org/ml/archives/dev/2015-October/024737.html for
> reference). Just applying the changes in this patch (only 07/12)
> will not fix the dead loop at least in my setup.

Try to enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT, and dump more log?

	--yliu

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Xie, Huawei]

On 10/12/2015 9:39 AM, Yuanhan Liu wrote:
> On Thu, Oct 08, 2015 at 10:51:02PM +0200, Steffen Bauch wrote:
>>
>> On 10/08/2015 05:32 PM, Nikita Kalyazin wrote:
>>> Hi Yuanhan,
>>>
>>>
>>> As I understand, the dead loop happened here (virtio_send_command):
>>> while (vq->vq_used_cons_idx == vq->vq_ring.used->idx) {

Nikita:

Didn't review the whole patch, but happen to  find a serious problem in
the code snippet here, as volatile isn't used, compiler will assume the
memory will not be changed outside and do only one comparison.

Try add volatile prefix, and it might fix your problem.
>>>       rte_rmb();
>>>       usleep(100);
>>> }
>>>
>>> Could you explain why wrong config reading caused that and how correct reading helps to avoid?
> Wrong config reading results to wrong config->max_virtqueue_pairs, which
> ends up with wrong ctrl vq index being set:
>
>     PMD: virtio_send_command(): vq->vq_queue_index = 37120
>
> Note that you need enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT to see above
> debug log.
>
> That is to say we are waiting for the backend to consume a non-exist
> queue, and that's how the dead loop comes.
>
>
>> Hi,
>>
>> I just recognized that this dead loop is the same one that I have
>> experienced (see
>> http://dpdk.org/ml/archives/dev/2015-October/024737.html for
>> reference). Just applying the changes in this patch (only 07/12)
>> will not fix the dead loop at least in my setup.
> Try to enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT, and dump more log?
>
> 	--yliu
>

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Xie, Huawei]

On 10/12/2015 10:33 AM, Xie, Huawei wrote:
> On 10/12/2015 9:39 AM, Yuanhan Liu wrote:
>> On Thu, Oct 08, 2015 at 10:51:02PM +0200, Steffen Bauch wrote:
>>> On 10/08/2015 05:32 PM, Nikita Kalyazin wrote:
>>>> Hi Yuanhan,
>>>>
>>>>
>>>> As I understand, the dead loop happened here (virtio_send_command):
>>>> while (vq->vq_used_cons_idx == vq->vq_ring.used->idx) {
> Nikita:
>
> Didn't review the whole patch, but happen to  find a serious problem in
> the code snippet here, as volatile isn't used, compiler will assume the
> memory will not be changed outside and do only one comparison.
>
> Try add volatile prefix, and it might fix your problem.
Read other mails in this thread, if the specific queue is due to wrong
queue index.
Fix the volatile in the code, otherwise if first time no match, the code
will go to dead loop directly and no chance to compare again in
optimized code.
>>>>       rte_rmb();
>>>>       usleep(100);
>>>> }
>>>>
>>>> Could you explain why wrong config reading caused that and how correct reading helps to avoid?
>> Wrong config reading results to wrong config->max_virtqueue_pairs, which
>> ends up with wrong ctrl vq index being set:
>>
>>     PMD: virtio_send_command(): vq->vq_queue_index = 37120
>>
>> Note that you need enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT to see above
>> debug log.
>>
>> That is to say we are waiting for the backend to consume a non-exist
>> queue, and that's how the dead loop comes.
>>
>>
>>> Hi,
>>>
>>> I just recognized that this dead loop is the same one that I have
>>> experienced (see
>>> http://dpdk.org/ml/archives/dev/2015-October/024737.html for
>>> reference). Just applying the changes in this patch (only 07/12)
>>> will not fix the dead loop at least in my setup.
>> Try to enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT, and dump more log?
>>
>> 	--yliu
>>
>

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Steffen Bauch]

On 10/12/2015 10:39 AM, Yuanhan Liu wrote:
> Hi,
>
> I just recognized that this dead loop is the same one that I have
> experienced (see
> http://dpdk.org/ml/archives/dev/2015-October/024737.html for
> reference). Just applying the changes in this patch (only 07/12)
> will not fix the dead loop at least in my setup.
> Try to enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT, and dump more log?
I enabled the additional debug output. First try was without any 
additional changes in master, but it blocked also. Second try was with

[dpdk-dev] [PATCH v6 06/13] virtio: read virtio_net_config correctly

applied, but same result.

If you want to recreate my setup, just follow instructions in

http://dpdk.org/ml/archives/dev/2015-October/024737.html


vagrant@vagrant-ubuntu-vivid-64:~/dpdk$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
Changes not staged for commit:
   (use "git add <file>..." to update what will be committed)
   (use "git checkout -- <file>..." to discard changes in working directory)

     modified:   config/defconfig_x86_64-native-linuxapp-gcc

..

vagrant@vagrant-ubuntu-vivid-64:~/dpdk/x86_64-native-linuxapp-gcc/app$ 
sudo ./testpmd -b 0000:00:03.0 -c 3 -n 1 -- -i
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 2 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2a3a800000 (size = 0x400000)
EAL: Ask a virtual area of 0xe000000 bytes
EAL: Virtual area found at 0x7f2a2c600000 (size = 0xe000000)
EAL: Ask a virtual area of 0x30c00000 bytes
EAL: Virtual area found at 0x7f29fb800000 (size = 0x30c00000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f29fb200000 (size = 0x400000)
EAL: Ask a virtual area of 0xa00000 bytes
EAL: Virtual area found at 0x7f29fa600000 (size = 0xa00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f29fa200000 (size = 0x200000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: TSC frequency is ~2198491 KHz
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using 
unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=3c9938c0;cpuset=[0])
EAL: lcore 1 is ready (tid=fa1ff700;cpuset=[1])
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL:   probe driver: 1af4:1000 rte_virtio_pmd
EAL:   Device is blacklisted, not initializing
EAL: PCI device 0000:00:08.0 on NUMA socket -1
EAL:   probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value 
/sys/bus/pci/devices/0000:00:08.0/uio/uio0/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio(): 
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd040 
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b54000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f29fb354000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 0 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start():  >>
EAL: PCI device 0000:00:09.0 on NUMA socket -1
EAL:   probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value 
/sys/bus/pci/devices/0000:00:09.0/uio/uio1/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio(): 
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd060 
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b50000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f29fb350000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 1 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start():  >>
Interactive-mode selected
Configuring Port 0 (socket 0)
PMD: virtio_dev_configure(): configure
PMD: virtio_dev_tx_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 1
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:512
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5fb000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2a3a9fb000
PMD: virtio_dev_rx_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 0
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:128
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5f6000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2a3a9f6000
PMD: virtio_dev_link_update(): Get link status from hw
PMD: virtio_dev_link_update(): Port 0 is up
PMD: virtio_dev_rxtx_start():  >>
PMD: virtio_dev_vring_start():  >>
PMD: virtio_dev_vring_start(): Allocated 256 bufs
PMD: virtio_dev_vring_start():  >>
PMD: virtio_dev_start(): nb_queues=1
PMD: virtio_dev_start(): Notified backend at initialization
PMD: virtio_send_command(): vq->vq_desc_head_idx = 0, status = 255, 
vq->hw->cvq = 0x7f29fb3567c0 vq = 0x7f29fb3567c0
PMD: virtio_send_command(): vq->vq_queue_index = 2

[ ... blocking]


Results after patch was applied:

vagrant@vagrant-ubuntu-vivid-64:~/dpdk/x86_64-native-linuxapp-gcc/app$ 
sudo ./testpmd -b 0000:00:03.0 -c 3 -n 1 -- -iEAL: Detected lcore 0 as 
core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 2 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2c8e000000 (size = 0x400000)
EAL: Ask a virtual area of 0xe000000 bytes
EAL: Virtual area found at 0x7f2c7fe00000 (size = 0xe000000)
EAL: Ask a virtual area of 0x30c00000 bytes
EAL: Virtual area found at 0x7f2c4f000000 (size = 0x30c00000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2c4ea00000 (size = 0x400000)
EAL: Ask a virtual area of 0xa00000 bytes
EAL: Virtual area found at 0x7f2c4de00000 (size = 0xa00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2c4da00000 (size = 0x200000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: TSC frequency is ~2198491 KHz
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using 
unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=904928c0;cpuset=[0])
EAL: lcore 1 is ready (tid=4d9ff700;cpuset=[1])
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL:   probe driver: 1af4:1000 rte_virtio_pmd
EAL:   Device is blacklisted, not initializing
EAL: PCI device 0000:00:08.0 on NUMA socket -1
EAL:   probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value 
/sys/bus/pci/devices/0000:00:08.0/uio/uio0/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio(): 
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd040 
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b54000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c4eb54000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 0 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start():  >>
EAL: PCI device 0000:00:09.0 on NUMA socket -1
EAL:   probe driver: 1af4:1000 rte_virtio_pmd
PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs value 
/sys/bus/pci/devices/0000:00:09.0/uio/uio1/portio/port0/size
PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio(): 
cannot parse size
PMD: virtio_resource_init_by_ioports(): PCI Port IO found start=0xd060 
with size=0x20
PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
PMD: virtio_negotiate_features(): features after negotiate = f8020
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
PMD: virtio_dev_cq_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 2
PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b50000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c4eb50000
PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
PMD: eth_virtio_dev_init(): config->status=1
PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
PMD: eth_virtio_dev_init(): port 1 vendorID=0x1af4 deviceID=0x1000
PMD: virtio_dev_vring_start():  >>
Interactive-mode selected
Configuring Port 0 (socket 0)
PMD: virtio_dev_configure(): configure
PMD: virtio_dev_tx_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 1
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:512
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5fb000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c8e1fb000
PMD: virtio_dev_rx_queue_setup():  >>
PMD: virtio_dev_queue_setup(): selecting queue: 0
PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:128
PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5f6000
PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c8e1f6000
PMD: virtio_dev_link_update(): Get link status from hw
PMD: virtio_dev_link_update(): Port 0 is up
PMD: virtio_dev_rxtx_start():  >>
PMD: virtio_dev_vring_start():  >>
PMD: virtio_dev_vring_start(): Allocated 256 bufs
PMD: virtio_dev_vring_start():  >>
PMD: virtio_dev_start(): nb_queues=1
PMD: virtio_dev_start(): Notified backend at initialization
PMD: virtio_send_command(): vq->vq_desc_head_idx = 0, status = 255, 
vq->hw->cvq = 0x7f2c4eb567c0 vq = 0x7f2c4eb567c0
PMD: virtio_send_command(): vq->vq_queue_index = 2

[... blocking]

Re: [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue

[Yuanhan Liu]

On Mon, Oct 12, 2015 at 10:58:17PM +0200, Steffen Bauch wrote:
> On 10/12/2015 10:39 AM, Yuanhan Liu wrote:
> >Hi,
> >
> >I just recognized that this dead loop is the same one that I have
> >experienced (see
> >http://dpdk.org/ml/archives/dev/2015-October/024737.html for
> >reference). Just applying the changes in this patch (only 07/12)
> >will not fix the dead loop at least in my setup.
> >Try to enable CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT, and dump more log?
> I enabled the additional debug output. First try was without any
> additional changes in master, but it blocked also. Second try was
> with
> 
> [dpdk-dev] [PATCH v6 06/13] virtio: read virtio_net_config correctly
> 
> applied, but same result.
> 
> If you want to recreate my setup, just follow instructions in
> 
> http://dpdk.org/ml/archives/dev/2015-October/024737.html
> 
> 
> vagrant@vagrant-ubuntu-vivid-64:~/dpdk$ git status
> On branch master
> Your branch is up-to-date with 'origin/master'.
> Changes not staged for commit:
>   (use "git add <file>..." to update what will be committed)
>   (use "git checkout -- <file>..." to discard changes in working directory)
> 
>     modified:   config/defconfig_x86_64-native-linuxapp-gcc
> 
> ..

Don't have clear clue there. But you could try Huawei's solution first.
It's likely that it will fix your problem.

If not, would you please try to reproduce it with qemu (you were using
virtualbox, right)?  And then dump the whoe command line here so that I
can try to reproduce and debug it on my side. Sorry that I don't use
virtualbox, as well as vagrant.

	--yliu

> 
> vagrant@vagrant-ubuntu-vivid-64:~/dpdk/x86_64-native-linuxapp-gcc/app$
> sudo ./testpmd -b 0000:00:03.0 -c 3 -n 1 -- -i
> EAL: Detected lcore 0 as core 0 on socket 0
> EAL: Detected lcore 1 as core 1 on socket 0
> EAL: Support maximum 128 logical core(s) by configuration.
> EAL: Detected 2 lcore(s)
> EAL: VFIO modules not all loaded, skip VFIO support...
> EAL: Setting up physically contiguous memory...
> EAL: Ask a virtual area of 0x400000 bytes
> EAL: Virtual area found at 0x7f2a3a800000 (size = 0x400000)
> EAL: Ask a virtual area of 0xe000000 bytes
> EAL: Virtual area found at 0x7f2a2c600000 (size = 0xe000000)
> EAL: Ask a virtual area of 0x30c00000 bytes
> EAL: Virtual area found at 0x7f29fb800000 (size = 0x30c00000)
> EAL: Ask a virtual area of 0x400000 bytes
> EAL: Virtual area found at 0x7f29fb200000 (size = 0x400000)
> EAL: Ask a virtual area of 0xa00000 bytes
> EAL: Virtual area found at 0x7f29fa600000 (size = 0xa00000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f29fa200000 (size = 0x200000)
> EAL: Requesting 512 pages of size 2MB from socket 0
> EAL: TSC frequency is ~2198491 KHz
> EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
> unreliable clock cycles !
> EAL: Master lcore 0 is ready (tid=3c9938c0;cpuset=[0])
> EAL: lcore 1 is ready (tid=fa1ff700;cpuset=[1])
> EAL: PCI device 0000:00:03.0 on NUMA socket -1
> EAL:   probe driver: 1af4:1000 rte_virtio_pmd
> EAL:   Device is blacklisted, not initializing
> EAL: PCI device 0000:00:08.0 on NUMA socket -1
> EAL:   probe driver: 1af4:1000 rte_virtio_pmd
> PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs
> value /sys/bus/pci/devices/0000:00:08.0/uio/uio0/portio/port0/size
> PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
> cannot parse size
> PMD: virtio_resource_init_by_ioports(): PCI Port IO found
> start=0xd040 with size=0x20
> PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
> PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
> PMD: virtio_negotiate_features(): features after negotiate = f8020
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
> PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
> PMD: virtio_dev_cq_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 2
> PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
> PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b54000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f29fb354000
> PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
> PMD: eth_virtio_dev_init(): config->status=1
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
> PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
> PMD: eth_virtio_dev_init(): port 0 vendorID=0x1af4 deviceID=0x1000
> PMD: virtio_dev_vring_start():  >>
> EAL: PCI device 0000:00:09.0 on NUMA socket -1
> EAL:   probe driver: 1af4:1000 rte_virtio_pmd
> PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs
> value /sys/bus/pci/devices/0000:00:09.0/uio/uio1/portio/port0/size
> PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
> cannot parse size
> PMD: virtio_resource_init_by_ioports(): PCI Port IO found
> start=0xd060 with size=0x20
> PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
> PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
> PMD: virtio_negotiate_features(): features after negotiate = f8020
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
> PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
> PMD: virtio_dev_cq_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 2
> PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
> PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b50000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f29fb350000
> PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
> PMD: eth_virtio_dev_init(): config->status=1
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
> PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
> PMD: eth_virtio_dev_init(): port 1 vendorID=0x1af4 deviceID=0x1000
> PMD: virtio_dev_vring_start():  >>
> Interactive-mode selected
> Configuring Port 0 (socket 0)
> PMD: virtio_dev_configure(): configure
> PMD: virtio_dev_tx_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 1
> PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:512
> PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5fb000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2a3a9fb000
> PMD: virtio_dev_rx_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 0
> PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:128
> PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5f6000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2a3a9f6000
> PMD: virtio_dev_link_update(): Get link status from hw
> PMD: virtio_dev_link_update(): Port 0 is up
> PMD: virtio_dev_rxtx_start():  >>
> PMD: virtio_dev_vring_start():  >>
> PMD: virtio_dev_vring_start(): Allocated 256 bufs
> PMD: virtio_dev_vring_start():  >>
> PMD: virtio_dev_start(): nb_queues=1
> PMD: virtio_dev_start(): Notified backend at initialization
> PMD: virtio_send_command(): vq->vq_desc_head_idx = 0, status = 255,
> vq->hw->cvq = 0x7f29fb3567c0 vq = 0x7f29fb3567c0
> PMD: virtio_send_command(): vq->vq_queue_index = 2
> 
> [ ... blocking]
> 
> 
> Results after patch was applied:
> 
> vagrant@vagrant-ubuntu-vivid-64:~/dpdk/x86_64-native-linuxapp-gcc/app$
> sudo ./testpmd -b 0000:00:03.0 -c 3 -n 1 -- -iEAL: Detected lcore 0
> as core 0 on socket 0
> EAL: Detected lcore 1 as core 1 on socket 0
> EAL: Support maximum 128 logical core(s) by configuration.
> EAL: Detected 2 lcore(s)
> EAL: VFIO modules not all loaded, skip VFIO support...
> EAL: Setting up physically contiguous memory...
> EAL: Ask a virtual area of 0x400000 bytes
> EAL: Virtual area found at 0x7f2c8e000000 (size = 0x400000)
> EAL: Ask a virtual area of 0xe000000 bytes
> EAL: Virtual area found at 0x7f2c7fe00000 (size = 0xe000000)
> EAL: Ask a virtual area of 0x30c00000 bytes
> EAL: Virtual area found at 0x7f2c4f000000 (size = 0x30c00000)
> EAL: Ask a virtual area of 0x400000 bytes
> EAL: Virtual area found at 0x7f2c4ea00000 (size = 0x400000)
> EAL: Ask a virtual area of 0xa00000 bytes
> EAL: Virtual area found at 0x7f2c4de00000 (size = 0xa00000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f2c4da00000 (size = 0x200000)
> EAL: Requesting 512 pages of size 2MB from socket 0
> EAL: TSC frequency is ~2198491 KHz
> EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
> unreliable clock cycles !
> EAL: Master lcore 0 is ready (tid=904928c0;cpuset=[0])
> EAL: lcore 1 is ready (tid=4d9ff700;cpuset=[1])
> EAL: PCI device 0000:00:03.0 on NUMA socket -1
> EAL:   probe driver: 1af4:1000 rte_virtio_pmd
> EAL:   Device is blacklisted, not initializing
> EAL: PCI device 0000:00:08.0 on NUMA socket -1
> EAL:   probe driver: 1af4:1000 rte_virtio_pmd
> PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs
> value /sys/bus/pci/devices/0000:00:08.0/uio/uio0/portio/port0/size
> PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
> cannot parse size
> PMD: virtio_resource_init_by_ioports(): PCI Port IO found
> start=0xd040 with size=0x20
> PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
> PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
> PMD: virtio_negotiate_features(): features after negotiate = f8020
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
> PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
> PMD: virtio_dev_cq_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 2
> PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
> PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b54000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c4eb54000
> PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
> PMD: eth_virtio_dev_init(): config->status=1
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:CC:DE:CD
> PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
> PMD: eth_virtio_dev_init(): port 0 vendorID=0x1af4 deviceID=0x1000
> PMD: virtio_dev_vring_start():  >>
> EAL: PCI device 0000:00:09.0 on NUMA socket -1
> EAL:   probe driver: 1af4:1000 rte_virtio_pmd
> PMD: parse_sysfs_value(): parse_sysfs_value(): cannot open sysfs
> value /sys/bus/pci/devices/0000:00:09.0/uio/uio1/portio/port0/size
> PMD: virtio_resource_init_by_uio(): virtio_resource_init_by_uio():
> cannot parse size
> PMD: virtio_resource_init_by_ioports(): PCI Port IO found
> start=0xd060 with size=0x20
> PMD: virtio_negotiate_features(): guest_features before negotiate = cf8020
> PMD: virtio_negotiate_features(): host_features before negotiate = 410fdda3
> PMD: virtio_negotiate_features(): features after negotiate = f8020
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
> PMD: eth_virtio_dev_init(): VIRTIO_NET_F_MQ is not supported
> PMD: virtio_dev_cq_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 2
> PMD: virtio_dev_queue_setup(): vq_size: 16 nb_desc:0
> PMD: virtio_dev_queue_setup(): vring_size: 4228, rounded_vring_size: 8192
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x67b50000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c4eb50000
> PMD: eth_virtio_dev_init(): config->max_virtqueue_pairs=1
> PMD: eth_virtio_dev_init(): config->status=1
> PMD: eth_virtio_dev_init(): PORT MAC: 08:00:27:07:D3:F5
> PMD: eth_virtio_dev_init(): hw->max_rx_queues=1 hw->max_tx_queues=1
> PMD: eth_virtio_dev_init(): port 1 vendorID=0x1af4 deviceID=0x1000
> PMD: virtio_dev_vring_start():  >>
> Interactive-mode selected
> Configuring Port 0 (socket 0)
> PMD: virtio_dev_configure(): configure
> PMD: virtio_dev_tx_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 1
> PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:512
> PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5fb000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c8e1fb000
> PMD: virtio_dev_rx_queue_setup():  >>
> PMD: virtio_dev_queue_setup(): selecting queue: 0
> PMD: virtio_dev_queue_setup(): vq_size: 256 nb_desc:128
> PMD: virtio_dev_queue_setup(): vring_size: 10244, rounded_vring_size: 12288
> PMD: virtio_dev_queue_setup(): vq->vq_ring_mem:      0x5f6000
> PMD: virtio_dev_queue_setup(): vq->vq_ring_virt_mem: 0x7f2c8e1f6000
> PMD: virtio_dev_link_update(): Get link status from hw
> PMD: virtio_dev_link_update(): Port 0 is up
> PMD: virtio_dev_rxtx_start():  >>
> PMD: virtio_dev_vring_start():  >>
> PMD: virtio_dev_vring_start(): Allocated 256 bufs
> PMD: virtio_dev_vring_start():  >>
> PMD: virtio_dev_start(): nb_queues=1
> PMD: virtio_dev_start(): Notified backend at initialization
> PMD: virtio_send_command(): vq->vq_desc_head_idx = 0, status = 255,
> vq->hw->cvq = 0x7f2c4eb567c0 vq = 0x7f2c4eb567c0
> PMD: virtio_send_command(): vq->vq_queue_index = 2
> 
> [... blocking]