* [dpdk-dev] Fw: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
@ 2015-10-28 10:59 Jan Viktorin
2015-10-28 11:17 ` [dpdk-dev] " Ananyev, Konstantin
0 siblings, 1 reply; 4+ messages in thread
From: Jan Viktorin @ 2015-10-28 10:59 UTC (permalink / raw)
To: Ananyev, Konstantin; +Cc: dev
Hello Konstantin,
the ACL patch (with changes as you suggested yesterday) breaks the
following test. I am confused about this. There is nothing in the log
that would help me to determine the source of the problem. How is this
test related to ACL? Moreover, I cannot see the actual packet drop
there, what packet has been dropped?
Regards
Jan
Begin forwarded message:
Date: 27 Oct 2015 13:44:40 -0700
From: sys_stv@intel.com
To: test-report@dpdk.org,viktorin@rehivetech.com
Subject: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
Test-Label: Intel Niantic on Fedora
Test-Status: ERROR
Patchwork: http://www.dpdk.org/dev/patchwork/patch/8106/
DPDK git baseline: affc455438f4cbd3b14e2d9a24fbc154e22d68d3
Patchwork ID: 8090-8106
http://www.dpdk.org/dev/patchwork/patch/8106/
Submitter: Jan Viktorin <viktorin@rehivetech.com>
Date: Tue, 27 Oct 2015 20:13:49 +0100
Compilation:
OS: fedora
Nic: niantic
i686-native-linuxapp-gcc: compile pass
x86_64-native-linuxapp-gcc: compile pass
DTS validation:
OS: fedora
Nic: Niantic
TestType: auto
GCC: 4
x86_64-native-linuxapp-gcc: total 75, passed 74, failed 1.
Failed Case List:
Target: x86_64-native-linuxapp-gcc
OS: fedora
Failed DTS case:
checksum_offload_with_vlan:
http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst
DTS Validation Error:
========================================================================================================================
========================================================================================================================
TEST SUITE : TestChecksumOffload
-------------------------------------------------------------------------------
Begin: Test Casetest_checksum_offload_with_vlan
--------------------------------------------------
FAILED 'Unexpected Packets Drop'
--------------------------------------------------
[ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n
4 -- -i --portmask=0x3 --disable-hw-vlan --enable-rx-cksum --crc-strip
--txqflags=0 [ SUITE_DUT_CMD] set verbose 1 [ SUITE_DUT_CMD] set
fwd csum [ SUITE_DUT_CMD] csum set ip hw 0
[ SUITE_DUT_CMD] csum set udp hw 0
[ SUITE_DUT_CMD] csum set tcp hw 0
[ SUITE_DUT_CMD] csum set sctp hw 0
[ SUITE_DUT_CMD] csum set ip hw 1
[ SUITE_DUT_CMD] csum set udp hw 1
[ SUITE_DUT_CMD] csum set tcp hw 1
[ SUITE_DUT_CMD] csum set sctp hw 1
[ SUITE_DUT_CMD] start
[SUITE_TESTER_CMD] scapy
[SUITE_TESTER_CMD] sys.path.append("./")
[SUITE_TESTER_CMD] from sctp import *
[SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IPv6(src="::2")/UDP()/("X"*46)
[SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IP(src="127.0.0.2")/SCTP()/("X"*48)
[SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IPv6(src="::2")/TCP()/("X"*46)
[SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IP(src="127.0.0.2")/UDP()/("X"*46)
[SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IP(src="127.0.0.2")/TCP()/("X"*46)
[SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] exit()
[SUITE_TESTER_CMD] echo -n '' > scapyResult.txt [SUITE_TESTER_CMD]
scp sniff.py root@10.239.128.80:~/ [SUITE_TESTER_CMD] SCAPY Receive
setup: [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
[SUITE_TESTER_CMD] scapy [SUITE_TESTER_CMD] subprocess.call("scapy -c
sniff.py &", shell=True) [SUITE_TESTER_CMD] sys.path.append("./")
[SUITE_TESTER_CMD] import sctp [SUITE_TESTER_CMD] from sctp import *
[SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IPv6(src="::1")/UDP(chksum=0xf)/("X"*46)],
iface="p785p2") [SUITE_TESTER_CMD]
sendp([Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IP(chksum=0x0)/SCTP(chksum=0xf)/("X"*48)],
iface="p785p2") [SUITE_TESTER_CMD]
sendp([Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)],
iface="p785p2") [SUITE_TESTER_CMD]
sendp([Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IP(chksum=0x0)/UDP(chksum=0xf)/("X"*46)],
iface="p785p2") [SUITE_TESTER_CMD]
sendp([Ether(dst="90:e2:ba:4a:54:81",
src="52:00:00:00:00:00")/IP(chksum=0x0)/TCP(chksum=0xf)/("X"*46)],
iface="p785p2") [SUITE_TESTER_CMD] exit() [SUITE_TESTER_CMD] cat
scapyResult.txt [SUITE_TESTER_CMD] SCAPY Result: End
test_checksum_offload_with_vlan
-------------------------------------------------------------------------------
[SUITE_DUT_CMD] quit
DPDK STV team
--
Jan Viktorin E-mail: Viktorin@RehiveTech.com
System Architect Web: www.RehiveTech.com
RehiveTech
Brno, Czech Republic
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dpdk-dev] |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
2015-10-28 10:59 [dpdk-dev] Fw: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported Jan Viktorin
@ 2015-10-28 11:17 ` Ananyev, Konstantin
2015-10-28 11:22 ` Jan Viktorin
0 siblings, 1 reply; 4+ messages in thread
From: Ananyev, Konstantin @ 2015-10-28 11:17 UTC (permalink / raw)
To: Jan Viktorin; +Cc: dev
Hi Jan,
> -----Original Message-----
> From: Jan Viktorin [mailto:viktorin@rehivetech.com]
> Sent: Wednesday, October 28, 2015 11:00 AM
> To: Ananyev, Konstantin
> Cc: dev@dpdk.org
> Subject: Fw: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
>
> Hello Konstantin,
>
> the ACL patch (with changes as you suggested yesterday) breaks the
> following test. I am confused about this. There is nothing in the log
> that would help me to determine the source of the problem. How is this
> test related to ACL? Moreover, I cannot see the actual packet drop
> there, what packet has been dropped?
I am also confused - testpmd doesn't use librte_acl at all.
Are there any other changes in your patch set?
Something related to vector instrincts emulation?
As they are now in rte_vect.h and are seen not only by LPM ilbrary?
Probably someone from STC team can explain what exactly packet fails?
Konstantin
>
> Regards
> Jan
>
> Begin forwarded message:
>
> Date: 27 Oct 2015 13:44:40 -0700
> From: sys_stv@intel.com
> To: test-report@dpdk.org,viktorin@rehivetech.com
> Subject: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
>
>
> Test-Label: Intel Niantic on Fedora
> Test-Status: ERROR
> Patchwork: http://www.dpdk.org/dev/patchwork/patch/8106/
>
> DPDK git baseline: affc455438f4cbd3b14e2d9a24fbc154e22d68d3
> Patchwork ID: 8090-8106
> http://www.dpdk.org/dev/patchwork/patch/8106/
> Submitter: Jan Viktorin <viktorin@rehivetech.com>
> Date: Tue, 27 Oct 2015 20:13:49 +0100
>
> Compilation:
> OS: fedora
> Nic: niantic
> i686-native-linuxapp-gcc: compile pass
> x86_64-native-linuxapp-gcc: compile pass
>
> DTS validation:
> OS: fedora
> Nic: Niantic
> TestType: auto
> GCC: 4
> x86_64-native-linuxapp-gcc: total 75, passed 74, failed 1.
> Failed Case List:
> Target: x86_64-native-linuxapp-gcc
> OS: fedora
> Failed DTS case:
> checksum_offload_with_vlan:
> http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst
>
> DTS Validation Error:
> ======================================================================================================
> ==================
> ======================================================================================================
> ==================
> TEST SUITE : TestChecksumOffload
>
> -------------------------------------------------------------------------------
> Begin: Test Casetest_checksum_offload_with_vlan
> --------------------------------------------------
> FAILED 'Unexpected Packets Drop'
> --------------------------------------------------
> [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n
> 4 -- -i --portmask=0x3 --disable-hw-vlan --enable-rx-cksum --crc-strip
> --txqflags=0 [ SUITE_DUT_CMD] set verbose 1 [ SUITE_DUT_CMD] set
> fwd csum [ SUITE_DUT_CMD] csum set ip hw 0
> [ SUITE_DUT_CMD] csum set udp hw 0
> [ SUITE_DUT_CMD] csum set tcp hw 0
> [ SUITE_DUT_CMD] csum set sctp hw 0
> [ SUITE_DUT_CMD] csum set ip hw 1
> [ SUITE_DUT_CMD] csum set udp hw 1
> [ SUITE_DUT_CMD] csum set tcp hw 1
> [ SUITE_DUT_CMD] csum set sctp hw 1
> [ SUITE_DUT_CMD] start
> [SUITE_TESTER_CMD] scapy
> [SUITE_TESTER_CMD] sys.path.append("./")
> [SUITE_TESTER_CMD] from sctp import *
> [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IPv6(src="::2")/UDP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IP(src="127.0.0.2")/SCTP()/("X"*48)
> [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IPv6(src="::2")/TCP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IP(src="127.0.0.2")/UDP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IP(src="127.0.0.2")/TCP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] exit()
> [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt [SUITE_TESTER_CMD]
> scp sniff.py root@10.239.128.80:~/ [SUITE_TESTER_CMD] SCAPY Receive
> setup: [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> [SUITE_TESTER_CMD] scapy [SUITE_TESTER_CMD] subprocess.call("scapy -c
> sniff.py &", shell=True) [SUITE_TESTER_CMD] sys.path.append("./")
> [SUITE_TESTER_CMD] import sctp [SUITE_TESTER_CMD] from sctp import *
> [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IPv6(src="::1")/UDP(chksum=0xf)/("X"*46)],
> iface="p785p2") [SUITE_TESTER_CMD]
> sendp([Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IP(chksum=0x0)/SCTP(chksum=0xf)/("X"*48)],
> iface="p785p2") [SUITE_TESTER_CMD]
> sendp([Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)],
> iface="p785p2") [SUITE_TESTER_CMD]
> sendp([Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IP(chksum=0x0)/UDP(chksum=0xf)/("X"*46)],
> iface="p785p2") [SUITE_TESTER_CMD]
> sendp([Ether(dst="90:e2:ba:4a:54:81",
> src="52:00:00:00:00:00")/IP(chksum=0x0)/TCP(chksum=0xf)/("X"*46)],
> iface="p785p2") [SUITE_TESTER_CMD] exit() [SUITE_TESTER_CMD] cat
> scapyResult.txt [SUITE_TESTER_CMD] SCAPY Result: End
> test_checksum_offload_with_vlan
> -------------------------------------------------------------------------------
> [SUITE_DUT_CMD] quit
>
>
>
> DPDK STV team
>
>
> --
> Jan Viktorin E-mail: Viktorin@RehiveTech.com
> System Architect Web: www.RehiveTech.com
> RehiveTech
> Brno, Czech Republic
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dpdk-dev] |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
2015-10-28 11:17 ` [dpdk-dev] " Ananyev, Konstantin
@ 2015-10-28 11:22 ` Jan Viktorin
2015-10-28 11:56 ` Ananyev, Konstantin
0 siblings, 1 reply; 4+ messages in thread
From: Jan Viktorin @ 2015-10-28 11:22 UTC (permalink / raw)
To: Ananyev, Konstantin; +Cc: dev
On Wed, 28 Oct 2015 11:17:37 +0000
"Ananyev, Konstantin" <konstantin.ananyev@intel.com> wrote:
> Hi Jan,
>
> > -----Original Message-----
> > From: Jan Viktorin [mailto:viktorin@rehivetech.com]
> > Sent: Wednesday, October 28, 2015 11:00 AM
> > To: Ananyev, Konstantin
> > Cc: dev@dpdk.org
> > Subject: Fw: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
> >
> > Hello Konstantin,
> >
> > the ACL patch (with changes as you suggested yesterday) breaks the
> > following test. I am confused about this. There is nothing in the log
> > that would help me to determine the source of the problem. How is this
> > test related to ACL? Moreover, I cannot see the actual packet drop
> > there, what packet has been dropped?
>
> I am also confused - testpmd doesn't use librte_acl at all.
> Are there any other changes in your patch set?
> Something related to vector instrincts emulation?
> As they are now in rte_vect.h and are seen not only by LPM ilbrary?
So, it is related to all the ARMv7 patch set? I thought it is only this
single patch... The only other thing I've changed is the LPM where for
x86/64 it keeps the previous implementation and for other platforms it
introduces a workaround without SSE. The new rte_vect.h is ARM-only.
Jan
> Probably someone from STC team can explain what exactly packet fails?
> Konstantin
>
> >
> > Regards
> > Jan
> >
> > Begin forwarded message:
> >
> > Date: 27 Oct 2015 13:44:40 -0700
> > From: sys_stv@intel.com
> > To: test-report@dpdk.org,viktorin@rehivetech.com
> > Subject: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
> >
> >
> > Test-Label: Intel Niantic on Fedora
> > Test-Status: ERROR
> > Patchwork: http://www.dpdk.org/dev/patchwork/patch/8106/
> >
> > DPDK git baseline: affc455438f4cbd3b14e2d9a24fbc154e22d68d3
> > Patchwork ID: 8090-8106
> > http://www.dpdk.org/dev/patchwork/patch/8106/
> > Submitter: Jan Viktorin <viktorin@rehivetech.com>
> > Date: Tue, 27 Oct 2015 20:13:49 +0100
> >
> > Compilation:
> > OS: fedora
> > Nic: niantic
> > i686-native-linuxapp-gcc: compile pass
> > x86_64-native-linuxapp-gcc: compile pass
> >
> > DTS validation:
> > OS: fedora
> > Nic: Niantic
> > TestType: auto
> > GCC: 4
> > x86_64-native-linuxapp-gcc: total 75, passed 74, failed 1.
> > Failed Case List:
> > Target: x86_64-native-linuxapp-gcc
> > OS: fedora
> > Failed DTS case:
> > checksum_offload_with_vlan:
> > http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst
> >
> > DTS Validation Error:
> > ======================================================================================================
> > ==================
> > ======================================================================================================
> > ==================
> > TEST SUITE : TestChecksumOffload
> >
> > -------------------------------------------------------------------------------
> > Begin: Test Casetest_checksum_offload_with_vlan
> > --------------------------------------------------
> > FAILED 'Unexpected Packets Drop'
> > --------------------------------------------------
> > [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n
> > 4 -- -i --portmask=0x3 --disable-hw-vlan --enable-rx-cksum --crc-strip
> > --txqflags=0 [ SUITE_DUT_CMD] set verbose 1 [ SUITE_DUT_CMD] set
> > fwd csum [ SUITE_DUT_CMD] csum set ip hw 0
> > [ SUITE_DUT_CMD] csum set udp hw 0
> > [ SUITE_DUT_CMD] csum set tcp hw 0
> > [ SUITE_DUT_CMD] csum set sctp hw 0
> > [ SUITE_DUT_CMD] csum set ip hw 1
> > [ SUITE_DUT_CMD] csum set udp hw 1
> > [ SUITE_DUT_CMD] csum set tcp hw 1
> > [ SUITE_DUT_CMD] csum set sctp hw 1
> > [ SUITE_DUT_CMD] start
> > [SUITE_TESTER_CMD] scapy
> > [SUITE_TESTER_CMD] sys.path.append("./")
> > [SUITE_TESTER_CMD] from sctp import *
> > [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IPv6(src="::2")/UDP()/("X"*46)
> > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/SCTP()/("X"*48)
> > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IPv6(src="::2")/TCP()/("X"*46)
> > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/UDP()/("X"*46)
> > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/TCP()/("X"*46)
> > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] exit()
> > [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt [SUITE_TESTER_CMD]
> > scp sniff.py root@10.239.128.80:~/ [SUITE_TESTER_CMD] SCAPY Receive
> > setup: [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> > [SUITE_TESTER_CMD] scapy [SUITE_TESTER_CMD] subprocess.call("scapy -c
> > sniff.py &", shell=True) [SUITE_TESTER_CMD] sys.path.append("./")
> > [SUITE_TESTER_CMD] import sctp [SUITE_TESTER_CMD] from sctp import *
> > [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IPv6(src="::1")/UDP(chksum=0xf)/("X"*46)],
> > iface="p785p2") [SUITE_TESTER_CMD]
> > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IP(chksum=0x0)/SCTP(chksum=0xf)/("X"*48)],
> > iface="p785p2") [SUITE_TESTER_CMD]
> > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)],
> > iface="p785p2") [SUITE_TESTER_CMD]
> > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IP(chksum=0x0)/UDP(chksum=0xf)/("X"*46)],
> > iface="p785p2") [SUITE_TESTER_CMD]
> > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > src="52:00:00:00:00:00")/IP(chksum=0x0)/TCP(chksum=0xf)/("X"*46)],
> > iface="p785p2") [SUITE_TESTER_CMD] exit() [SUITE_TESTER_CMD] cat
> > scapyResult.txt [SUITE_TESTER_CMD] SCAPY Result: End
> > test_checksum_offload_with_vlan
> > -------------------------------------------------------------------------------
> > [SUITE_DUT_CMD] quit
> >
> >
> >
> > DPDK STV team
> >
> >
> > --
> > Jan Viktorin E-mail: Viktorin@RehiveTech.com
> > System Architect Web: www.RehiveTech.com
> > RehiveTech
> > Brno, Czech Republic
--
Jan Viktorin E-mail: Viktorin@RehiveTech.com
System Architect Web: www.RehiveTech.com
RehiveTech
Brno, Czech Republic
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dpdk-dev] |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
2015-10-28 11:22 ` Jan Viktorin
@ 2015-10-28 11:56 ` Ananyev, Konstantin
0 siblings, 0 replies; 4+ messages in thread
From: Ananyev, Konstantin @ 2015-10-28 11:56 UTC (permalink / raw)
To: Jan Viktorin; +Cc: dev
> -----Original Message-----
> From: Jan Viktorin [mailto:viktorin@rehivetech.com]
> Sent: Wednesday, October 28, 2015 11:22 AM
> To: Ananyev, Konstantin
> Cc: dev@dpdk.org; Cao, Waterman
> Subject: Re: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
>
> On Wed, 28 Oct 2015 11:17:37 +0000
> "Ananyev, Konstantin" <konstantin.ananyev@intel.com> wrote:
>
> > Hi Jan,
> >
> > > -----Original Message-----
> > > From: Jan Viktorin [mailto:viktorin@rehivetech.com]
> > > Sent: Wednesday, October 28, 2015 11:00 AM
> > > To: Ananyev, Konstantin
> > > Cc: dev@dpdk.org
> > > Subject: Fw: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
> > >
> > > Hello Konstantin,
> > >
> > > the ACL patch (with changes as you suggested yesterday) breaks the
> > > following test. I am confused about this. There is nothing in the log
> > > that would help me to determine the source of the problem. How is this
> > > test related to ACL? Moreover, I cannot see the actual packet drop
> > > there, what packet has been dropped?
> >
> > I am also confused - testpmd doesn't use librte_acl at all.
> > Are there any other changes in your patch set?
> > Something related to vector instrincts emulation?
> > As they are now in rte_vect.h and are seen not only by LPM ilbrary?
>
> So, it is related to all the ARMv7 patch set? I thought it is only this
> single patch... The only other thing I've changed is the LPM where for
> x86/64 it keeps the previous implementation and for other platforms it
> introduces a workaround without SSE. The new rte_vect.h is ARM-only.
Yep, it should be arm-only...
>
> Jan
>
> > Probably someone from STC team can explain what exactly packet fails?
> > Konstantin
> >
> > >
> > > Regards
> > > Jan
> > >
> > > Begin forwarded message:
> > >
> > > Date: 27 Oct 2015 13:44:40 -0700
> > > From: sys_stv@intel.com
> > > To: test-report@dpdk.org,viktorin@rehivetech.com
> > > Subject: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported
> > >
> > >
> > > Test-Label: Intel Niantic on Fedora
> > > Test-Status: ERROR
> > > Patchwork: http://www.dpdk.org/dev/patchwork/patch/8106/
> > >
> > > DPDK git baseline: affc455438f4cbd3b14e2d9a24fbc154e22d68d3
> > > Patchwork ID: 8090-8106
> > > http://www.dpdk.org/dev/patchwork/patch/8106/
> > > Submitter: Jan Viktorin <viktorin@rehivetech.com>
> > > Date: Tue, 27 Oct 2015 20:13:49 +0100
> > >
> > > Compilation:
> > > OS: fedora
> > > Nic: niantic
> > > i686-native-linuxapp-gcc: compile pass
> > > x86_64-native-linuxapp-gcc: compile pass
> > >
> > > DTS validation:
> > > OS: fedora
> > > Nic: Niantic
> > > TestType: auto
> > > GCC: 4
> > > x86_64-native-linuxapp-gcc: total 75, passed 74, failed 1.
> > > Failed Case List:
> > > Target: x86_64-native-linuxapp-gcc
> > > OS: fedora
> > > Failed DTS case:
> > > checksum_offload_with_vlan:
> > > http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst
> > >
> > > DTS Validation Error:
> > >
> ======================================================================================================
> > > ==================
> > >
> ======================================================================================================
> > > ==================
> > > TEST SUITE : TestChecksumOffload
> > >
> > > -------------------------------------------------------------------------------
> > > Begin: Test Casetest_checksum_offload_with_vlan
> > > --------------------------------------------------
> > > FAILED 'Unexpected Packets Drop'
> > > --------------------------------------------------
> > > [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n
> > > 4 -- -i --portmask=0x3 --disable-hw-vlan --enable-rx-cksum --crc-strip
> > > --txqflags=0 [ SUITE_DUT_CMD] set verbose 1 [ SUITE_DUT_CMD] set
> > > fwd csum [ SUITE_DUT_CMD] csum set ip hw 0
> > > [ SUITE_DUT_CMD] csum set udp hw 0
> > > [ SUITE_DUT_CMD] csum set tcp hw 0
> > > [ SUITE_DUT_CMD] csum set sctp hw 0
> > > [ SUITE_DUT_CMD] csum set ip hw 1
> > > [ SUITE_DUT_CMD] csum set udp hw 1
> > > [ SUITE_DUT_CMD] csum set tcp hw 1
> > > [ SUITE_DUT_CMD] csum set sctp hw 1
> > > [ SUITE_DUT_CMD] start
> > > [SUITE_TESTER_CMD] scapy
> > > [SUITE_TESTER_CMD] sys.path.append("./")
> > > [SUITE_TESTER_CMD] from sctp import *
> > > [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IPv6(src="::2")/UDP()/("X"*46)
> > > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > > Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/SCTP()/("X"*48)
> > > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > > Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IPv6(src="::2")/TCP()/("X"*46)
> > > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > > Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/UDP()/("X"*46)
> > > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p =
> > > Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/TCP()/("X"*46)
> > > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] exit()
> > > [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt [SUITE_TESTER_CMD]
> > > scp sniff.py root@10.239.128.80:~/ [SUITE_TESTER_CMD] SCAPY Receive
> > > setup: [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester
> > > [SUITE_TESTER_CMD] scapy [SUITE_TESTER_CMD] subprocess.call("scapy -c
> > > sniff.py &", shell=True) [SUITE_TESTER_CMD] sys.path.append("./")
> > > [SUITE_TESTER_CMD] import sctp [SUITE_TESTER_CMD] from sctp import *
> > > [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IPv6(src="::1")/UDP(chksum=0xf)/("X"*46)],
> > > iface="p785p2") [SUITE_TESTER_CMD]
> > > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IP(chksum=0x0)/SCTP(chksum=0xf)/("X"*48)],
> > > iface="p785p2") [SUITE_TESTER_CMD]
> > > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)],
> > > iface="p785p2") [SUITE_TESTER_CMD]
> > > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IP(chksum=0x0)/UDP(chksum=0xf)/("X"*46)],
> > > iface="p785p2") [SUITE_TESTER_CMD]
> > > sendp([Ether(dst="90:e2:ba:4a:54:81",
> > > src="52:00:00:00:00:00")/IP(chksum=0x0)/TCP(chksum=0xf)/("X"*46)],
> > > iface="p785p2") [SUITE_TESTER_CMD] exit() [SUITE_TESTER_CMD] cat
> > > scapyResult.txt [SUITE_TESTER_CMD] SCAPY Result: End
> > > test_checksum_offload_with_vlan
> > > -------------------------------------------------------------------------------
> > > [SUITE_DUT_CMD] quit
> > >
> > >
> > >
> > > DPDK STV team
> > >
> > >
> > > --
> > > Jan Viktorin E-mail: Viktorin@RehiveTech.com
> > > System Architect Web: www.RehiveTech.com
> > > RehiveTech
> > > Brno, Czech Republic
>
>
>
> --
> Jan Viktorin E-mail: Viktorin@RehiveTech.com
> System Architect Web: www.RehiveTech.com
> RehiveTech
> Brno, Czech Republic
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-10-28 11:57 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-10-28 10:59 [dpdk-dev] Fw: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported Jan Viktorin
2015-10-28 11:17 ` [dpdk-dev] " Ananyev, Konstantin
2015-10-28 11:22 ` Jan Viktorin
2015-10-28 11:56 ` Ananyev, Konstantin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).