From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: dev@dpdk.org
Cc: Felix Marti <felix@chelsio.com>,
Kumar Sanghvi <kumaras@chelsio.com>,
Nirranjan Kirubaharan <nirranjan@chelsio.com>
Subject: Re: [dpdk-dev] |ERROR| pw 9018 ethdev: add a missing sanity check for nb_tx_desc during txq setup
Date: Fri, 20 Nov 2015 19:07:12 +0530 [thread overview]
Message-ID: <20151120133710.GA30609@scalar.blr.asicdesigners.com> (raw)
In-Reply-To: <edcf24$hvv9db@FMSMGA003.fm.intel.com>
Hi all,
I received this auto email regarding 'Unexpected Packets Drop' and
it is referring to my patch. I don't think I've changed anything that
could cause this. Kindly advise.
Thanks,
Rahul
On Friday, November 11/20/15, 2015 at 03:14:51 -0800, sys_stv@intel.com wrote:
> Test-Label: Intel Niantic on Fedora
> Test-Status: ERROR
> Patchwork: http://www.dpdk.org/dev/patchwork/patch/9018/
>
> DPDK git baseline: e64833f2273ac67becbca10d9f2f1598872dc99e
> Patchwork ID: 9018
> http://www.dpdk.org/dev/patchwork/patch/9018/
> Submitter: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
> Date: Fri, 20 Nov 2015 15:56:37 +0530
>
> Source Compilation:
> OS: fedora
> Nic: niantic
> i686-native-linuxapp-gcc: compile pass
> x86_64-native-linuxapp-gcc: compile pass
>
> DTS validation:
> OS: fedora
> Nic: Niantic
> TestType: auto
> GCC: 4
> x86_64-native-linuxapp-gcc: total 79, passed 78, failed 1.
> Failed Case List:
> Target: x86_64-native-linuxapp-gcc
> OS: fedora
> Failed DTS case:
> checksum_offload_with_vlan: http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst
>
> DTS Validation Error:
> ========================================================================================================================
> ========================================================================================================================
> TEST SUITE : TestChecksumOffload
>
> -------------------------------------------------------------------------------
> Begin: Test Casetest_checksum_offload_with_vlan
> --------------------------------------------------
> FAILED 'Unexpected Packets Drop'
> --------------------------------------------------
> [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --disable-hw-vlan --enable-rx-cksum --crc-strip --txqflags=0
> [ SUITE_DUT_CMD] set verbose 1
> [ SUITE_DUT_CMD] set fwd csum
> [ SUITE_DUT_CMD] csum set ip hw 0
> [ SUITE_DUT_CMD] csum set udp hw 0
> [ SUITE_DUT_CMD] csum set tcp hw 0
> [ SUITE_DUT_CMD] csum set sctp hw 0
> [ SUITE_DUT_CMD] csum set ip hw 1
> [ SUITE_DUT_CMD] csum set udp hw 1
> [ SUITE_DUT_CMD] csum set tcp hw 1
> [ SUITE_DUT_CMD] csum set sctp hw 1
> [ SUITE_DUT_CMD] start
> [SUITE_TESTER_CMD] scapy
> [SUITE_TESTER_CMD] sys.path.append("./")
> [SUITE_TESTER_CMD] from sctp import *
> [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81")/IPv6(src="::2")/UDP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2()
> [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81")/IP(src="127.0.0.2")/SCTP()/("X"*48)
> [SUITE_TESTER_CMD] p.show2()
> [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81")/IPv6(src="::2")/TCP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2()
> [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81")/IP(src="127.0.0.2")/UDP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2()
> [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81")/IP(src="127.0.0.2")/TCP()/("X"*46)
> [SUITE_TESTER_CMD] p.show2()
> [SUITE_TESTER_CMD] exit()
> [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt
> [SUITE_TESTER_CMD] scp sniff.py root@10.239.128.80:~/
> [SUITE_TESTER_CMD] SCAPY Receive setup:
> [SUITE_TESTER_CMD] scapy
> [SUITE_TESTER_CMD] subprocess.call("scapy -c sniff.py &", shell=True)
> [SUITE_TESTER_CMD] sys.path.append("./")
> [SUITE_TESTER_CMD] import sctp
> [SUITE_TESTER_CMD] from sctp import *
> [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81")/IPv6(src="::1")/UDP(chksum=0xf)/("X"*46)], iface="p785p2")
> [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81")/IP(chksum=0x0)/SCTP(chksum=0xf)/("X"*48)], iface="p785p2")
> [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)], iface="p785p2")
> [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81")/IP(chksum=0x0)/UDP(chksum=0xf)/("X"*46)], iface="p785p2")
> [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81")/IP(chksum=0x0)/TCP(chksum=0xf)/("X"*46)], iface="p785p2")
> [SUITE_TESTER_CMD] exit()
> [SUITE_TESTER_CMD] cat scapyResult.txt
> [SUITE_TESTER_CMD] SCAPY Result:
> End test_checksum_offload_with_vlan
> -------------------------------------------------------------------------------
> [SUITE_DUT_CMD] quit
>
>
>
> DPDK STV team
next parent reply other threads:[~2015-11-20 13:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <edcf24$hvv9db@FMSMGA003.fm.intel.com>
2015-11-20 13:37 ` Rahul Lakkireddy [this message]
2015-11-20 14:10 ` Mcnamara, John
2015-11-23 7:06 ` Liu, Yong
2015-11-23 7:27 ` Yuanhan Liu
2015-11-23 7:36 ` Liu, Yong
2015-11-23 7:41 ` Yuanhan Liu
2015-11-23 9:05 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151120133710.GA30609@scalar.blr.asicdesigners.com \
--to=rahul.lakkireddy@chelsio.com \
--cc=1448015117-30050-1-git-send-email-rahul.lakkireddy@chelsio.com \
--cc=dev@dpdk.org \
--cc=felix@chelsio.com \
--cc=kumaras@chelsio.com \
--cc=nirranjan@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).