[dpdk-dev] [PATCH v3 0/2] disable CONFIG_RTE_SCHED_VECTOR for arm

[dpdk-dev] [PATCH v3 0/2] disable CONFIG_RTE_SCHED_VECTOR for arm

[Jerin Jacob]

v1..v2
created common arm64 configs under common_arm64 file.
let  each armv8 machine targets  capture only the differences
between the common arm64 config.

v2..v3
Fix whitespace issue with git am

Jerin Jacob (2):
  config: arm64: create common arm64 configs under common_arm64 file
  config: disable CONFIG_RTE_SCHED_VECTOR for arm

 config/common_arm64                          | 49 ++++++++++++++++++++++++++++
 config/defconfig_arm-armv7a-linuxapp-gcc     |  1 +
 config/defconfig_arm64-armv8a-linuxapp-gcc   | 18 +---------
 config/defconfig_arm64-thunderx-linuxapp-gcc | 18 +---------
 config/defconfig_arm64-xgene1-linuxapp-gcc   | 18 +---------
 5 files changed, 53 insertions(+), 51 deletions(-)
 create mode 100644 config/common_arm64

-- 
2.1.0

[dpdk-dev] [PATCH v3 1/2] config: arm64: create common arm64 configs under common_arm64 file

[Jerin Jacob]

let  each armv8 machine targets  capture only the differences
between the common arm64 config.

Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
 config/common_arm64                          | 48 ++++++++++++++++++++++++++++
 config/defconfig_arm64-armv8a-linuxapp-gcc   | 18 +----------
 config/defconfig_arm64-thunderx-linuxapp-gcc | 18 +----------
 config/defconfig_arm64-xgene1-linuxapp-gcc   | 18 +----------
 4 files changed, 51 insertions(+), 51 deletions(-)
 create mode 100644 config/common_arm64

diff --git a/config/common_arm64 b/config/common_arm64
new file mode 100644
index 0000000..5e5e303
--- /dev/null
+++ b/config/common_arm64
@@ -0,0 +1,48 @@
+#   BSD LICENSE
+#
+#   Copyright (C) Cavium networks 2015. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Cavium networks nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+
+CONFIG_RTE_ARCH="arm64"
+CONFIG_RTE_ARCH_ARM64=y
+CONFIG_RTE_ARCH_64=y
+CONFIG_RTE_ARCH_ARM_NEON=y
+
+CONFIG_RTE_FORCE_INTRINSICS=y
+
+CONFIG_RTE_IXGBE_INC_VECTOR=n
+CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
+CONFIG_RTE_LIBRTE_IVSHMEM=n
+CONFIG_RTE_LIBRTE_FM10K_PMD=n
+CONFIG_RTE_LIBRTE_I40E_PMD=n
+
+CONFIG_RTE_LIBRTE_LPM=n
+CONFIG_RTE_LIBRTE_TABLE=n
+CONFIG_RTE_LIBRTE_PIPELINE=n
diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
index 49e7056..39e36b8 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-gcc
+++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
@@ -30,27 +30,11 @@
 #
 
 #include "common_linuxapp"
+#include "common_arm64"
 
 CONFIG_RTE_MACHINE="armv8a"
 
-CONFIG_RTE_ARCH="arm64"
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_ARCH_ARM_NEON=y
-
-CONFIG_RTE_FORCE_INTRINSICS=y
-
 CONFIG_RTE_TOOLCHAIN="gcc"
 CONFIG_RTE_TOOLCHAIN_GCC=y
 
 CONFIG_RTE_CACHE_LINE_SIZE=64
-
-CONFIG_RTE_IXGBE_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
-CONFIG_RTE_LIBRTE_IVSHMEM=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_I40E_PMD=n
-
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_LIBRTE_PIPELINE=n
diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc
index 6b2048b..d63d9b8 100644
--- a/config/defconfig_arm64-thunderx-linuxapp-gcc
+++ b/config/defconfig_arm64-thunderx-linuxapp-gcc
@@ -30,27 +30,11 @@
 #
 
 #include "common_linuxapp"
+#include "common_arm64"
 
 CONFIG_RTE_MACHINE="thunderx"
 
-CONFIG_RTE_ARCH="arm64"
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_ARCH_ARM_NEON=y
-
-CONFIG_RTE_FORCE_INTRINSICS=y
-
 CONFIG_RTE_TOOLCHAIN="gcc"
 CONFIG_RTE_TOOLCHAIN_GCC=y
 
 CONFIG_RTE_CACHE_LINE_SIZE=128
-
-CONFIG_RTE_IXGBE_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
-CONFIG_RTE_LIBRTE_IVSHMEM=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_I40E_PMD=n
-
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_LIBRTE_PIPELINE=n
diff --git a/config/defconfig_arm64-xgene1-linuxapp-gcc b/config/defconfig_arm64-xgene1-linuxapp-gcc
index d75f8f0..0759721 100644
--- a/config/defconfig_arm64-xgene1-linuxapp-gcc
+++ b/config/defconfig_arm64-xgene1-linuxapp-gcc
@@ -30,27 +30,11 @@
 #
 
 #include "common_linuxapp"
+#include "common_arm64"
 
 CONFIG_RTE_MACHINE="xgene1"
 
-CONFIG_RTE_ARCH="arm64"
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_ARCH_ARM_NEON=y
-
-CONFIG_RTE_FORCE_INTRINSICS=y
-
 CONFIG_RTE_TOOLCHAIN="gcc"
 CONFIG_RTE_TOOLCHAIN_GCC=y
 
 CONFIG_RTE_CACHE_LINE_SIZE=64
-
-CONFIG_RTE_IXGBE_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
-CONFIG_RTE_LIBRTE_IVSHMEM=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_I40E_PMD=n
-
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_LIBRTE_PIPELINE=n
-- 
2.1.0

[dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jerin Jacob]

Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
does support only SSE intrinsic, so disable it till we have neon support.

Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
 config/common_arm64                      | 1 +
 config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
 2 files changed, 2 insertions(+)

diff --git a/config/common_arm64 b/config/common_arm64
index 5e5e303..d6a9cb9 100644
--- a/config/common_arm64
+++ b/config/common_arm64
@@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
 CONFIG_RTE_LIBRTE_LPM=n
 CONFIG_RTE_LIBRTE_TABLE=n
 CONFIG_RTE_LIBRTE_PIPELINE=n
+CONFIG_RTE_SCHED_VECTOR=n
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index 82143af..9924ff9 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
 CONFIG_RTE_LIBRTE_LPM=n
 CONFIG_RTE_LIBRTE_TABLE=n
 CONFIG_RTE_LIBRTE_PIPELINE=n
+CONFIG_RTE_SCHED_VECTOR=n
 
 # cannot use those on ARM
 CONFIG_RTE_KNI_KMOD=n
-- 
2.1.0

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jan Viktorin]

Acked-By: Jan Viktorin <viktorin@rehivetech.com>

On Fri, 27 Nov 2015 19:04:28 +0530
Jerin Jacob <jerin.jacob@caviumnetworks.com> wrote:

> Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
> does support only SSE intrinsic, so disable it till we have neon support.
> 
> Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
> 
> Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> ---
>  config/common_arm64                      | 1 +
>  config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/config/common_arm64 b/config/common_arm64
> index 5e5e303..d6a9cb9 100644
> --- a/config/common_arm64
> +++ b/config/common_arm64
> @@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
>  CONFIG_RTE_LIBRTE_LPM=n
>  CONFIG_RTE_LIBRTE_TABLE=n
>  CONFIG_RTE_LIBRTE_PIPELINE=n
> +CONFIG_RTE_SCHED_VECTOR=n
> diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
> index 82143af..9924ff9 100644
> --- a/config/defconfig_arm-armv7a-linuxapp-gcc
> +++ b/config/defconfig_arm-armv7a-linuxapp-gcc
> @@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
>  CONFIG_RTE_LIBRTE_LPM=n
>  CONFIG_RTE_LIBRTE_TABLE=n
>  CONFIG_RTE_LIBRTE_PIPELINE=n
> +CONFIG_RTE_SCHED_VECTOR=n
>  
>  # cannot use those on ARM
>  CONFIG_RTE_KNI_KMOD=n

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jianbo Liu]

On Fri, Nov 27, 2015 at 07:04:28PM +0530, Jerin Jacob wrote:
> Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
> does support only SSE intrinsic, so disable it till we have neon support.
> 
> Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
> 
> Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> ---
>  config/common_arm64                      | 1 +
>  config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/config/common_arm64 b/config/common_arm64
> index 5e5e303..d6a9cb9 100644
> --- a/config/common_arm64
> +++ b/config/common_arm64
> @@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
>  CONFIG_RTE_LIBRTE_LPM=n
>  CONFIG_RTE_LIBRTE_TABLE=n
>  CONFIG_RTE_LIBRTE_PIPELINE=n
> +CONFIG_RTE_SCHED_VECTOR=n
> diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
> index 82143af..9924ff9 100644
> --- a/config/defconfig_arm-armv7a-linuxapp-gcc
> +++ b/config/defconfig_arm-armv7a-linuxapp-gcc
> @@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
>  CONFIG_RTE_LIBRTE_LPM=n
>  CONFIG_RTE_LIBRTE_TABLE=n
>  CONFIG_RTE_LIBRTE_PIPELINE=n
> +CONFIG_RTE_SCHED_VECTOR=n
>  
>  # cannot use those on ARM
>  CONFIG_RTE_KNI_KMOD=n
> -- 
> 2.1.0
> 

Hi Jerin,
In this way, we still have to modify two files each time a new feature
is added but not verified on ARM architectures.
Since disabling those drivers and libs are common for both armv7 and
armv8, can you put them in one config file, for example: common_arm? 
It is not like common_arm64, which is solely for armv8 platform.
Actually, the arm64 common config is defconfig_arm64-armv8a-linuxapp-gcc
you can include it in the thunderx or xgene1 config files respectively,
and overriding some special config if needed.

On the other hand, If we support the features in the future by
replacing SSE intrinsic with NEON, we just need to remove the lines in one place.

Regards,
Jianbo

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jerin Jacob]

On Sun, Nov 29, 2015 at 06:48:29PM -0500, Jianbo Liu wrote:
> On Fri, Nov 27, 2015 at 07:04:28PM +0530, Jerin Jacob wrote:
> > Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
> > does support only SSE intrinsic, so disable it till we have neon support.
> > 
> > Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
> > 
> > Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > ---
> >  config/common_arm64                      | 1 +
> >  config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
> >  2 files changed, 2 insertions(+)
> > 
> > diff --git a/config/common_arm64 b/config/common_arm64
> > index 5e5e303..d6a9cb9 100644
> > --- a/config/common_arm64
> > +++ b/config/common_arm64
> > @@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
> >  CONFIG_RTE_LIBRTE_LPM=n
> >  CONFIG_RTE_LIBRTE_TABLE=n
> >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > +CONFIG_RTE_SCHED_VECTOR=n
> > diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
> > index 82143af..9924ff9 100644
> > --- a/config/defconfig_arm-armv7a-linuxapp-gcc
> > +++ b/config/defconfig_arm-armv7a-linuxapp-gcc
> > @@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
> >  CONFIG_RTE_LIBRTE_LPM=n
> >  CONFIG_RTE_LIBRTE_TABLE=n
> >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > +CONFIG_RTE_SCHED_VECTOR=n
> >  
> >  # cannot use those on ARM
> >  CONFIG_RTE_KNI_KMOD=n
> > -- 
> > 2.1.0
> > 
> 
> Hi Jerin,

Hi Jianbo, Thanks for the review.
Looking forward to seeing contributions to DPDK-ARM.
We definitely need more hands to make best DPDK-ARM port.

> In this way, we still have to modify two files each time a new feature
> is added but not verified on ARM architectures.
> Since disabling those drivers and libs are common for both armv7 and
> armv8, can you put them in one config file, for example: common_arm? 

I initially thought of making it a single common_arm file, Then
later I realized that it may not be worth as,

1) If a new feature added to DPDK which has the dependency on SSE then
implementer has to disable on "n" platforms(tile, powerpc..).By unifying
single arm config will make it "n-1" so it's like "n" vs "n-1" not "n"
vs "2n"

2) AFAIK, PCI NIC PMD's are not yet supported in ARMv7 platform yet
unlike ARMv8.
Till we have PCI NIC PMD support, armv7 config needs to be updated
for each and every new PMD inclusion.

3) neon capabilities are bit different in ARMv7 and ARMv8.
For instance, "vqtbl1q_u8" neon intrinsics is not defined in ARMv7 which used
in implementing ACL-NEON. i.e Need additional efforts to extend
the armv8 neon code to armv7(or vice versa).So it's better to
have fine control on the config file to enable selective features

3) anyway we may need common_armv8 file to address the "IMPLEMENTATION
DEFINED" parts of the armv8 specific in future, like frequency at cntvct_el0
runs ? optional features like armv8 crypto instruction support or not?
It's armv8 v1 or v2 ? atomic instruction support for not? its a long
list

4)I would like to see ARM configs as different config like i686, X86_64
in DPDK


> It is not like common_arm64, which is solely for armv8 platform.
> Actually, the arm64 common config is defconfig_arm64-armv8a-linuxapp-gcc

I thought so, Then  I realized that we may have
FreeBSD, arm compiler, clang, llvm support in future.

> you can include it in the thunderx or xgene1 config files respectively,
> and overriding some special config if needed.

Agree. existing patch addresses this

> 
> On the other hand, If we support the features in the future by
> replacing SSE intrinsic with NEON, we just need to remove the lines in one place.

See point 3 above,

I feel rather than coming with the framework to fix the exceptions it's
better to fix the exceptions its self.
I am planning to send out next patch by today for supporting
CONFIG_RTE_LIBRTE_LPM,CONFIG_RTE_LIBRTE_TABLE,CONFIG_RTE_LIBRTE_PIPELINE.

i.e only a few entries will be common. Please find below the list,
the reason for setting as "n" for armv7 and armv8 is different.
lack of PCI PMD supports vs SIMD support.

CONFIG_RTE_IXGBE_INC_VECTOR=n
CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
CONFIG_RTE_LIBRTE_IVSHMEM=n
CONFIG_RTE_LIBRTE_FM10K_PMD=n
CONFIG_RTE_LIBRTE_I40E_PMD=n

- Jerin

> 
> Regards,
> Jianbo

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jianbo Liu]

On Mon, Nov 30, 2015 at 11:17:52AM +0530, Jerin Jacob wrote:
> On Sun, Nov 29, 2015 at 06:48:29PM -0500, Jianbo Liu wrote:
> > On Fri, Nov 27, 2015 at 07:04:28PM +0530, Jerin Jacob wrote:
> > > Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
> > > does support only SSE intrinsic, so disable it till we have neon support.
> > > 
> > > Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
> > > 
> > > Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > > ---
> > >  config/common_arm64                      | 1 +
> > >  config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
> > >  2 files changed, 2 insertions(+)
> > > 
> > > diff --git a/config/common_arm64 b/config/common_arm64
> > > index 5e5e303..d6a9cb9 100644
> > > --- a/config/common_arm64
> > > +++ b/config/common_arm64
> > > @@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
> > >  CONFIG_RTE_LIBRTE_LPM=n
> > >  CONFIG_RTE_LIBRTE_TABLE=n
> > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > +CONFIG_RTE_SCHED_VECTOR=n
> > > diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > index 82143af..9924ff9 100644
> > > --- a/config/defconfig_arm-armv7a-linuxapp-gcc
> > > +++ b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > @@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
> > >  CONFIG_RTE_LIBRTE_LPM=n
> > >  CONFIG_RTE_LIBRTE_TABLE=n
> > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > +CONFIG_RTE_SCHED_VECTOR=n
> > >  
> > >  # cannot use those on ARM
> > >  CONFIG_RTE_KNI_KMOD=n
> > > -- 
> > > 2.1.0
> > > 
> > 
> > Hi Jerin,
> 
> Hi Jianbo, Thanks for the review.
> Looking forward to seeing contributions to DPDK-ARM.
> We definitely need more hands to make best DPDK-ARM port.
> 
> > In this way, we still have to modify two files each time a new feature
> > is added but not verified on ARM architectures.
> > Since disabling those drivers and libs are common for both armv7 and
> > armv8, can you put them in one config file, for example: common_arm? 
> 
> I initially thought of making it a single common_arm file, Then
> later I realized that it may not be worth as,
> 
> 1) If a new feature added to DPDK which has the dependency on SSE then
> implementer has to disable on "n" platforms(tile, powerpc..).By unifying
> single arm config will make it "n-1" so it's like "n" vs "n-1" not "n"
> vs "2n"

I'm talking about your patch, which is for ARM platform only. And the
two files we need to modify are armv7 and armv8 configs. 
If you want to include other platforms, your patch is still incomplete :)

> 
> 2) AFAIK, PCI NIC PMD's are not yet supported in ARMv7 platform yet
> unlike ARMv8.
> Till we have PCI NIC PMD support, armv7 config needs to be updated
> for each and every new PMD inclusion.
> 
> 3) neon capabilities are bit different in ARMv7 and ARMv8.
> For instance, "vqtbl1q_u8" neon intrinsics is not defined in ARMv7 which used
> in implementing ACL-NEON. i.e Need additional efforts to extend
> the armv8 neon code to armv7(or vice versa).So it's better to
> have fine control on the config file to enable selective features
> 

The differences between ARMv7 and ARMv8 can't justify we only add new
config for ARMv8. And this file is trying to disable drivers and libs
which is not supported on ARM platforms for now.

> 3) anyway we may need common_armv8 file to address the "IMPLEMENTATION
> DEFINED" parts of the armv8 specific in future, like frequency at cntvct_el0
> runs ? optional features like armv8 crypto instruction support or not?
> It's armv8 v1 or v2 ? atomic instruction support for not? its a long
> list
> 

I think these "IMPLEMENTATION DEFINED" features should be configured
in the different platform (machine) config files. Can this
common_arm64 solve your concern?

> 4)I would like to see ARM configs as different config like i686, X86_64
> in DPDK
> 

Basically, we need to use the default common_linux/bsd to enable the
new-added features in DPDK.

> 
> > It is not like common_arm64, which is solely for armv8 platform.
> > Actually, the arm64 common config is defconfig_arm64-armv8a-linuxapp-gcc
> 
> I thought so, Then  I realized that we may have
> FreeBSD, arm compiler, clang, llvm support in future.
> 
> > you can include it in the thunderx or xgene1 config files respectively,
> > and overriding some special config if needed.
> 
> Agree. existing patch addresses this
> 

If there exists a defconfig_arm64-armv8a-linuxapp-gcc, why needs to
add a new file(common_arm64) in your patch?
The defconfig_arm64-armv8a-xxx-xxx can be treated as a config for a
common ARMv8 platform, and one which other specific ARMv8 platforms
can base on.

> > 
> > On the other hand, If we support the features in the future by
> > replacing SSE intrinsic with NEON, we just need to remove the lines in one place.
> 
> See point 3 above,
> 
> I feel rather than coming with the framework to fix the exceptions it's
> better to fix the exceptions its self.
> I am planning to send out next patch by today for supporting
> CONFIG_RTE_LIBRTE_LPM,CONFIG_RTE_LIBRTE_TABLE,CONFIG_RTE_LIBRTE_PIPELINE.
> 
> i.e only a few entries will be common. Please find below the list,
> the reason for setting as "n" for armv7 and armv8 is different.
> lack of PCI PMD supports vs SIMD support.
> 
> CONFIG_RTE_IXGBE_INC_VECTOR=n
> CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
> CONFIG_RTE_LIBRTE_IVSHMEM=n
> CONFIG_RTE_LIBRTE_FM10K_PMD=n
> CONFIG_RTE_LIBRTE_I40E_PMD=n
> 

Yes, but what if new SSE enhancement is added on x86, we need to add
it to the list.

> - Jerin
> 
> > 
> > Regards,
> > Jianbo

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jerin Jacob]

On Mon, Nov 30, 2015 at 12:03:21PM -0500, Jianbo Liu wrote:
> On Mon, Nov 30, 2015 at 11:17:52AM +0530, Jerin Jacob wrote:
> > On Sun, Nov 29, 2015 at 06:48:29PM -0500, Jianbo Liu wrote:
> > > On Fri, Nov 27, 2015 at 07:04:28PM +0530, Jerin Jacob wrote:
> > > > Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
> > > > does support only SSE intrinsic, so disable it till we have neon support.
> > > > 
> > > > Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
> > > > 
> > > > Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > > > ---
> > > >  config/common_arm64                      | 1 +
> > > >  config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
> > > >  2 files changed, 2 insertions(+)
> > > > 
> > > > diff --git a/config/common_arm64 b/config/common_arm64
> > > > index 5e5e303..d6a9cb9 100644
> > > > --- a/config/common_arm64
> > > > +++ b/config/common_arm64
> > > > @@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
> > > >  CONFIG_RTE_LIBRTE_LPM=n
> > > >  CONFIG_RTE_LIBRTE_TABLE=n
> > > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > > +CONFIG_RTE_SCHED_VECTOR=n
> > > > diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > index 82143af..9924ff9 100644
> > > > --- a/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > +++ b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > @@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
> > > >  CONFIG_RTE_LIBRTE_LPM=n
> > > >  CONFIG_RTE_LIBRTE_TABLE=n
> > > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > > +CONFIG_RTE_SCHED_VECTOR=n
> > > >  
> > > >  # cannot use those on ARM
> > > >  CONFIG_RTE_KNI_KMOD=n
> > > > -- 
> > > > 2.1.0
> > > > 
> > > 
> > > Hi Jerin,
> > 
> > Hi Jianbo, Thanks for the review.
> > Looking forward to seeing contributions to DPDK-ARM.
> > We definitely need more hands to make best DPDK-ARM port.
> > 
> > > In this way, we still have to modify two files each time a new feature
> > > is added but not verified on ARM architectures.
> > > Since disabling those drivers and libs are common for both armv7 and
> > > armv8, can you put them in one config file, for example: common_arm? 
> > 
> > I initially thought of making it a single common_arm file, Then
> > later I realized that it may not be worth as,
> > 
> > 1) If a new feature added to DPDK which has the dependency on SSE then
> > implementer has to disable on "n" platforms(tile, powerpc..).By unifying
> > single arm config will make it "n-1" so it's like "n" vs "n-1" not "n"
> > vs "2n"
> 
> I'm talking about your patch, which is for ARM platform only. And the
> two files we need to modify are armv7 and armv8 configs. 
> If you want to include other platforms, your patch is still incomplete :)
> 

That was the reply for the concern you have raised for the new feature.
Not specific to my patch. My patch is complete, as I have
checked other platforms before sending the patch
they have already disabled the sched library :-)


> > 
> > 2) AFAIK, PCI NIC PMD's are not yet supported in ARMv7 platform yet
> > unlike ARMv8.
> > Till we have PCI NIC PMD support, armv7 config needs to be updated
> > for each and every new PMD inclusion.
> > 
> > 3) neon capabilities are bit different in ARMv7 and ARMv8.
> > For instance, "vqtbl1q_u8" neon intrinsics is not defined in ARMv7 which used
> > in implementing ACL-NEON. i.e Need additional efforts to extend
> > the armv8 neon code to armv7(or vice versa).So it's better to
> > have fine control on the config file to enable selective features
> > 
> 
> The differences between ARMv7 and ARMv8 can't justify we only add new
> config for ARMv8. And this file is trying to disable drivers and libs
> which is not supported on ARM platforms for now.
>

I thought difference and point 3 should justify the need for different config. No?

  
> > 3) anyway we may need common_armv8 file to address the "IMPLEMENTATION
> > DEFINED" parts of the armv8 specific in future, like frequency at cntvct_el0
> > runs ? optional features like armv8 crypto instruction support or not?
> > It's armv8 v1 or v2 ? atomic instruction support for not? its a long
> > list
> > 
> 
> I think these "IMPLEMENTATION DEFINED" features should be configured
> in the different platform (machine) config files. Can this
> common_arm64 solve your concern?

Yes, "IMPLEMENTATION DEFINED" features of armv8(default behavior in
common_arm64). I think it makes sense not mix with armv7.

> 
> > 4)I would like to see ARM configs as different config like i686, X86_64
> > in DPDK
> > 
> 
> Basically, we need to use the default common_linux/bsd to enable the
> new-added features in DPDK.
> 
> > 
> > > It is not like common_arm64, which is solely for armv8 platform.
> > > Actually, the arm64 common config is defconfig_arm64-armv8a-linuxapp-gcc
> > 
> > I thought so, Then  I realized that we may have
> > FreeBSD, arm compiler, clang, llvm support in future.
> > 
> > > you can include it in the thunderx or xgene1 config files respectively,
> > > and overriding some special config if needed.
> > 
> > Agree. existing patch addresses this
> > 
> 
> If there exists a defconfig_arm64-armv8a-linuxapp-gcc, why needs to
> add a new file(common_arm64) in your patch?
> The defconfig_arm64-armv8a-xxx-xxx can be treated as a config for a
> common ARMv8 platform, and one which other specific ARMv8 platforms
> can base on.
>

I was thinking to have the common_arm64 file so that "FreeBSD, arm compiler,
clang, llvm" future version can include it directly.
But I agree with you. defconfig_arm64-armv8a-linuxapp-gcc can be treated as a
config for a common file for defconfig_arm64-*-linuxapp-gcc(anyway its same,
just the toolchain added in defconfig_arm64-*-linuxapp-gcc)
I will send out new version with defconfig_arm64-armv8a-linuxapp-gcc
as the base instead of common_arm64 file.


 
> > > 
> > > On the other hand, If we support the features in the future by
> > > replacing SSE intrinsic with NEON, we just need to remove the lines in one place.
> > 
> > See point 3 above,
> > 
> > I feel rather than coming with the framework to fix the exceptions it's
> > better to fix the exceptions its self.
> > I am planning to send out next patch by today for supporting
> > CONFIG_RTE_LIBRTE_LPM,CONFIG_RTE_LIBRTE_TABLE,CONFIG_RTE_LIBRTE_PIPELINE.
> > 
> > i.e only a few entries will be common. Please find below the list,
> > the reason for setting as "n" for armv7 and armv8 is different.
> > lack of PCI PMD supports vs SIMD support.
> > 
> > CONFIG_RTE_IXGBE_INC_VECTOR=n
> > CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
> > CONFIG_RTE_LIBRTE_IVSHMEM=n
> > CONFIG_RTE_LIBRTE_FM10K_PMD=n
> > CONFIG_RTE_LIBRTE_I40E_PMD=n
> > 
> 
> Yes, but what if new SSE enhancement is added on x86, we need to add
> it to the list.

CONFIG_RTE_IXGBE_INC_VECTOR=n
CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
CONFIG_RTE_LIBRTE_IVSHMEM=n
CONFIG_RTE_LIBRTE_FM10K_PMD=n
CONFIG_RTE_LIBRTE_I40E_PMD=n

IMO, creating a config file with above as "common_arm" file
doesn't make sense to me. It looks odd and we are not there because
functional difference in current ARMv7 and ARMv8 port.
Feel free to submit the RFC patch if you think it makes sense.

Let me know your plan. I can hold off my v4  for "updating
defconfig_arm64-armv8a-linuxapp-gcc as base instead of common_arm64 file"


> 
> > - Jerin
> > 
> > > 
> > > Regards,
> > > Jianbo

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jianbo Liu]

On Mon, Nov 30, 2015 at 03:52:31PM +0530, Jerin Jacob wrote:
> On Mon, Nov 30, 2015 at 12:03:21PM -0500, Jianbo Liu wrote:
> > On Mon, Nov 30, 2015 at 11:17:52AM +0530, Jerin Jacob wrote:
> > > On Sun, Nov 29, 2015 at 06:48:29PM -0500, Jianbo Liu wrote:
> > > > On Fri, Nov 27, 2015 at 07:04:28PM +0530, Jerin Jacob wrote:
> > > > > Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
> > > > > does support only SSE intrinsic, so disable it till we have neon support.
> > > > > 
> > > > > Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
> > > > > 
> > > > > Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > > > > ---
> > > > >  config/common_arm64                      | 1 +
> > > > >  config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
> > > > >  2 files changed, 2 insertions(+)
> > > > > 
> > > > > diff --git a/config/common_arm64 b/config/common_arm64
> > > > > index 5e5e303..d6a9cb9 100644
> > > > > --- a/config/common_arm64
> > > > > +++ b/config/common_arm64
> > > > > @@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
> > > > >  CONFIG_RTE_LIBRTE_LPM=n
> > > > >  CONFIG_RTE_LIBRTE_TABLE=n
> > > > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > > > +CONFIG_RTE_SCHED_VECTOR=n
> > > > > diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > > index 82143af..9924ff9 100644
> > > > > --- a/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > > +++ b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > > @@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
> > > > >  CONFIG_RTE_LIBRTE_LPM=n
> > > > >  CONFIG_RTE_LIBRTE_TABLE=n
> > > > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > > > +CONFIG_RTE_SCHED_VECTOR=n
> > > > >  
> > > > >  # cannot use those on ARM
> > > > >  CONFIG_RTE_KNI_KMOD=n
> > > > > -- 
> > > > > 2.1.0
> > > > > 
> > > > 
> > > > Hi Jerin,
> > > 
> > > Hi Jianbo, Thanks for the review.
> > > Looking forward to seeing contributions to DPDK-ARM.
> > > We definitely need more hands to make best DPDK-ARM port.
> > > 
> > > > In this way, we still have to modify two files each time a new feature
> > > > is added but not verified on ARM architectures.
> > > > Since disabling those drivers and libs are common for both armv7 and
> > > > armv8, can you put them in one config file, for example: common_arm? 
> > > 
> > > I initially thought of making it a single common_arm file, Then
> > > later I realized that it may not be worth as,
> > > 
> > > 1) If a new feature added to DPDK which has the dependency on SSE then
> > > implementer has to disable on "n" platforms(tile, powerpc..).By unifying
> > > single arm config will make it "n-1" so it's like "n" vs "n-1" not "n"
> > > vs "2n"
> > 
> > I'm talking about your patch, which is for ARM platform only. And the
> > two files we need to modify are armv7 and armv8 configs. 
> > If you want to include other platforms, your patch is still incomplete :)
> > 
> 
> That was the reply for the concern you have raised for the new feature.
> Not specific to my patch. My patch is complete, as I have
> checked other platforms before sending the patch
> they have already disabled the sched library :-)
> 
> 
> > > 
> > > 2) AFAIK, PCI NIC PMD's are not yet supported in ARMv7 platform yet
> > > unlike ARMv8.
> > > Till we have PCI NIC PMD support, armv7 config needs to be updated
> > > for each and every new PMD inclusion.
> > > 
> > > 3) neon capabilities are bit different in ARMv7 and ARMv8.
> > > For instance, "vqtbl1q_u8" neon intrinsics is not defined in ARMv7 which used
> > > in implementing ACL-NEON. i.e Need additional efforts to extend
> > > the armv8 neon code to armv7(or vice versa).So it's better to
> > > have fine control on the config file to enable selective features
> > > 
> > 
> > The differences between ARMv7 and ARMv8 can't justify we only add new
> > config for ARMv8. And this file is trying to disable drivers and libs
> > which is not supported on ARM platforms for now.
> >
> 
> I thought difference and point 3 should justify the need for different config. No?
> 
>   
> > > 3) anyway we may need common_armv8 file to address the "IMPLEMENTATION
> > > DEFINED" parts of the armv8 specific in future, like frequency at cntvct_el0
> > > runs ? optional features like armv8 crypto instruction support or not?
> > > It's armv8 v1 or v2 ? atomic instruction support for not? its a long
> > > list
> > > 
> > 
> > I think these "IMPLEMENTATION DEFINED" features should be configured
> > in the different platform (machine) config files. Can this
> > common_arm64 solve your concern?
> 
> Yes, "IMPLEMENTATION DEFINED" features of armv8(default behavior in
> common_arm64). I think it makes sense not mix with armv7.
> 
> > 
> > > 4)I would like to see ARM configs as different config like i686, X86_64
> > > in DPDK
> > > 
> > 
> > Basically, we need to use the default common_linux/bsd to enable the
> > new-added features in DPDK.
> > 
> > > 
> > > > It is not like common_arm64, which is solely for armv8 platform.
> > > > Actually, the arm64 common config is defconfig_arm64-armv8a-linuxapp-gcc
> > > 
> > > I thought so, Then  I realized that we may have
> > > FreeBSD, arm compiler, clang, llvm support in future.
> > > 
> > > > you can include it in the thunderx or xgene1 config files respectively,
> > > > and overriding some special config if needed.
> > > 
> > > Agree. existing patch addresses this
> > > 
> > 
> > If there exists a defconfig_arm64-armv8a-linuxapp-gcc, why needs to
> > add a new file(common_arm64) in your patch?
> > The defconfig_arm64-armv8a-xxx-xxx can be treated as a config for a
> > common ARMv8 platform, and one which other specific ARMv8 platforms
> > can base on.
> >
> 
> I was thinking to have the common_arm64 file so that "FreeBSD, arm compiler,
> clang, llvm" future version can include it directly.
> But I agree with you. defconfig_arm64-armv8a-linuxapp-gcc can be treated as a
> config for a common file for defconfig_arm64-*-linuxapp-gcc(anyway its same,
> just the toolchain added in defconfig_arm64-*-linuxapp-gcc)
> I will send out new version with defconfig_arm64-armv8a-linuxapp-gcc
> as the base instead of common_arm64 file.
> 
> 
>  
> > > > 
> > > > On the other hand, If we support the features in the future by
> > > > replacing SSE intrinsic with NEON, we just need to remove the lines in one place.
> > > 
> > > See point 3 above,
> > > 
> > > I feel rather than coming with the framework to fix the exceptions it's
> > > better to fix the exceptions its self.
> > > I am planning to send out next patch by today for supporting
> > > CONFIG_RTE_LIBRTE_LPM,CONFIG_RTE_LIBRTE_TABLE,CONFIG_RTE_LIBRTE_PIPELINE.
> > > 
> > > i.e only a few entries will be common. Please find below the list,
> > > the reason for setting as "n" for armv7 and armv8 is different.
> > > lack of PCI PMD supports vs SIMD support.
> > > 
> > > CONFIG_RTE_IXGBE_INC_VECTOR=n
> > > CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
> > > CONFIG_RTE_LIBRTE_IVSHMEM=n
> > > CONFIG_RTE_LIBRTE_FM10K_PMD=n
> > > CONFIG_RTE_LIBRTE_I40E_PMD=n
> > > 
> > 
> > Yes, but what if new SSE enhancement is added on x86, we need to add
> > it to the list.
> 
> CONFIG_RTE_IXGBE_INC_VECTOR=n
> CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
> CONFIG_RTE_LIBRTE_IVSHMEM=n
> CONFIG_RTE_LIBRTE_FM10K_PMD=n
> CONFIG_RTE_LIBRTE_I40E_PMD=n
> 
> IMO, creating a config file with above as "common_arm" file
> doesn't make sense to me. It looks odd and we are not there because
> functional difference in current ARMv7 and ARMv8 port.
> Feel free to submit the RFC patch if you think it makes sense.
> 
> Let me know your plan. I can hold off my v4  for "updating
> defconfig_arm64-armv8a-linuxapp-gcc as base instead of common_arm64 file"
> 
I understand your concern about ARMv7 and ARMv8 differencs, We can talk
that later. For now, please continue your v4 patch.
Besides, I don't like "common_arm" either. If there must be, it should be
called backlists, and provided globally by DPDK for all non-x86 platform :)

> 
> > 
> > > - Jerin
> > > 
> > > > 
> > > > Regards,
> > > > Jianbo

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jan Viktorin]

On Mon, 30 Nov 2015 13:55:45 -0500
Jianbo Liu <jianbo.liu@linaro.org> wrote:

> On Mon, Nov 30, 2015 at 03:52:31PM +0530, Jerin Jacob wrote:
> > On Mon, Nov 30, 2015 at 12:03:21PM -0500, Jianbo Liu wrote:  
> > > On Mon, Nov 30, 2015 at 11:17:52AM +0530, Jerin Jacob wrote:  
> > > > On Sun, Nov 29, 2015 at 06:48:29PM -0500, Jianbo Liu wrote:  
> > > > > On Fri, Nov 27, 2015 at 07:04:28PM +0530, Jerin Jacob wrote:  
> > > > > > Commit 42ec27a0178a causes compiling error on arm, as RTE_SCHED_VECTOR
> > > > > > does support only SSE intrinsic, so disable it till we have neon support.
> > > > > > 
> > > > > > Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
> > > > > > 
> > > > > > Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > > > > > ---
> > > > > >  config/common_arm64                      | 1 +
> > > > > >  config/defconfig_arm-armv7a-linuxapp-gcc | 1 +
> > > > > >  2 files changed, 2 insertions(+)
> > > > > > 
> > > > > > diff --git a/config/common_arm64 b/config/common_arm64
> > > > > > index 5e5e303..d6a9cb9 100644
> > > > > > --- a/config/common_arm64
> > > > > > +++ b/config/common_arm64
> > > > > > @@ -46,3 +46,4 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
> > > > > >  CONFIG_RTE_LIBRTE_LPM=n
> > > > > >  CONFIG_RTE_LIBRTE_TABLE=n
> > > > > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > > > > +CONFIG_RTE_SCHED_VECTOR=n
> > > > > > diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > > > index 82143af..9924ff9 100644
> > > > > > --- a/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > > > +++ b/config/defconfig_arm-armv7a-linuxapp-gcc
> > > > > > @@ -57,6 +57,7 @@ CONFIG_RTE_LIBRTE_ACL=n
> > > > > >  CONFIG_RTE_LIBRTE_LPM=n
> > > > > >  CONFIG_RTE_LIBRTE_TABLE=n
> > > > > >  CONFIG_RTE_LIBRTE_PIPELINE=n
> > > > > > +CONFIG_RTE_SCHED_VECTOR=n
> > > > > >  
> > > > > >  # cannot use those on ARM
> > > > > >  CONFIG_RTE_KNI_KMOD=n
> > > > > > -- 
> > > > > > 2.1.0
> > > > > >   
> > > > > 
> > > > > Hi Jerin,  
> > > > 
> > > > Hi Jianbo, Thanks for the review.
> > > > Looking forward to seeing contributions to DPDK-ARM.
> > > > We definitely need more hands to make best DPDK-ARM port.
> > > >   
> > > > > In this way, we still have to modify two files each time a new feature
> > > > > is added but not verified on ARM architectures.
> > > > > Since disabling those drivers and libs are common for both armv7 and
> > > > > armv8, can you put them in one config file, for example: common_arm?   

Hello Jerin and Jianbo.

Do you think that changing a single line in two files (instead of a
single single) is really an issue? I don't think so. At least for now.

I believe (and have already expressed this idea) that this is not a
problem of architecture ports but it is a problem of the build system.
Love me or hate me, in my opinion the build system is broken :). The
build system should be able to solve this.

I've created privately an integration of kconfig into DPDK, however, it
is far from being usable and I did not have time to make at least an
RFC patch. If there is an attitude in the community to include such
thing in the future versions, I'd like to make some more effort in this
area.

For now, the separate armv7/armv8 configuration seems OK to me.

> > > > 
> > > > [snip]
> > > > 
> > > > 2) AFAIK, PCI NIC PMD's are not yet supported in ARMv7 platform yet
> > > > unlike ARMv8.
> > > > Till we have PCI NIC PMD support, armv7 config needs to be updated
> > > > for each and every new PMD inclusion.

Unfortunately yes. I don't like this state very much...

> > > > 
> > > > 3) neon capabilities are bit different in ARMv7 and ARMv8.
> > > > For instance, "vqtbl1q_u8" neon intrinsics is not defined in ARMv7 which used
> > > > in implementing ACL-NEON. i.e Need additional efforts to extend
> > > > the armv8 neon code to armv7(or vice versa).So it's better to
> > > > have fine control on the config file to enable selective features
> > > >   
> > > 
> > > The differences between ARMv7 and ARMv8 can't justify we only add new
> > > config for ARMv8. And this file is trying to disable drivers and libs
> > > which is not supported on ARM platforms for now.
> > >  
> > 
> > I thought difference and point 3 should justify the need for different config. No?

I vote yes.

> > [snip]
> > > 
> > 
> > I was thinking to have the common_arm64 file so that "FreeBSD, arm compiler,
> > clang, llvm" future version can include it directly.
> > But I agree with you. defconfig_arm64-armv8a-linuxapp-gcc can be treated as a
> > config for a common file for defconfig_arm64-*-linuxapp-gcc(anyway its same,
> > just the toolchain added in defconfig_arm64-*-linuxapp-gcc)
> > I will send out new version with defconfig_arm64-armv8a-linuxapp-gcc
> > as the base instead of common_arm64 file.

I think that unless we support more compilers/operating systems (and
this will take some time), there is no need to consider more general
configurations. I agree to stay with the armv[78]-linuxapp-gcc for now.

Kind Regards
Jan Viktorin

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Thomas Monjalon]

2015-11-30 14:27, Jan Viktorin:
> I believe (and have already expressed this idea) that this is not a
> problem of architecture ports but it is a problem of the build system.
> Love me or hate me, in my opinion the build system is broken :). The
> build system should be able to solve this.
> 
> I've created privately an integration of kconfig into DPDK, however, it
> is far from being usable and I did not have time to make at least an
> RFC patch. If there is an attitude in the community to include such
> thing in the future versions, I'd like to make some more effort in this
> area.

If we were integrating kconfig, we should consider kconfig-frontends
(http://ymorin.is-a-geek.org/projects/kconfig-frontends).
But I'm not sure it is the way to go. You are welcome to open the debate
in a dedicated thread by explaining the benefits compared to a configuration
script.
I think most of the options could be automatically guessed given the target
CPU, kernel, libc and compiler. It looks like a scripting task, not a
manual configuration (as kconfig provides). But maybe we can mix kconfig
and some automatic defaults.

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Jan Viktorin]

On Mon, 30 Nov 2015 14:59:45 +0100
Thomas Monjalon <thomas.monjalon@6wind.com> wrote:

> 2015-11-30 14:27, Jan Viktorin:
> > I believe (and have already expressed this idea) that this is not a
> > problem of architecture ports but it is a problem of the build system.
> > Love me or hate me, in my opinion the build system is broken :). The
> > build system should be able to solve this.
> > 
> > I've created privately an integration of kconfig into DPDK, however, it
> > is far from being usable and I did not have time to make at least an
> > RFC patch. If there is an attitude in the community to include such
> > thing in the future versions, I'd like to make some more effort in this
> > area.  
> 
> If we were integrating kconfig, we should consider kconfig-frontends
> (http://ymorin.is-a-geek.org/projects/kconfig-frontends).

True, this seems to be the easiest way. I've already used it
successfully.

> But I'm not sure it is the way to go. You are welcome to open the debate
> in a dedicated thread by explaining the benefits compared to a configuration
> script.

OK. I will consider this. Probably, after the community call... (Or
before?)

> I think most of the options could be automatically guessed given the target
> CPU, kernel, libc and compiler. It looks like a scripting task, not a
> manual configuration (as kconfig provides). But maybe we can mix kconfig
> and some automatic defaults.
> 

Well, scripting... If you have issues like "feature X" does not work
on "platform A" then you need to express this. If you try to script
such dependency, I am afraid you always end up with a system of the same
or equivalent complexity as the kconfig already has :). We'll see...

Regards
Jan

-- 
   Jan Viktorin                  E-mail: Viktorin@RehiveTech.com
   System Architect              Web:    www.RehiveTech.com
   RehiveTech
   Brno, Czech Republic

Re: [dpdk-dev] [PATCH v3 2/2] config: disable CONFIG_RTE_SCHED_VECTOR for arm

[Thomas Monjalon]

2015-11-30 15:04, Jan Viktorin:
> On Mon, 30 Nov 2015 14:59:45 +0100
> Thomas Monjalon <thomas.monjalon@6wind.com> wrote:
> 
> > 2015-11-30 14:27, Jan Viktorin:
> > > I believe (and have already expressed this idea) that this is not a
> > > problem of architecture ports but it is a problem of the build system.
> > > Love me or hate me, in my opinion the build system is broken :). The
> > > build system should be able to solve this.
> > > 
> > > I've created privately an integration of kconfig into DPDK, however, it
> > > is far from being usable and I did not have time to make at least an
> > > RFC patch. If there is an attitude in the community to include such
> > > thing in the future versions, I'd like to make some more effort in this
> > > area.  
> > 
> > If we were integrating kconfig, we should consider kconfig-frontends
> > (http://ymorin.is-a-geek.org/projects/kconfig-frontends).
> 
> True, this seems to be the easiest way. I've already used it
> successfully.
> 
> > But I'm not sure it is the way to go. You are welcome to open the debate
> > in a dedicated thread by explaining the benefits compared to a configuration
> > script.
> 
> OK. I will consider this. Probably, after the community call... (Or
> before?)

Please take your time.
We will better ready to discuss it when the "make install" issue will be
solved.

> > I think most of the options could be automatically guessed given the target
> > CPU, kernel, libc and compiler. It looks like a scripting task, not a
> > manual configuration (as kconfig provides). But maybe we can mix kconfig
> > and some automatic defaults.
> > 
> 
> Well, scripting... If you have issues like "feature X" does not work
> on "platform A" then you need to express this. If you try to script
> such dependency, I am afraid you always end up with a system of the same
> or equivalent complexity as the kconfig already has :). We'll see...

I'm not speaking about complexity here, but just features.
With kconfig, options and dependencies are well described but the defaults
are fixed. With a script, you can have some dynamically generated defaults.

Please expose the needs and features clearly in another thread. Thanks

Re: [dpdk-dev] [PATCH v3 0/2] disable CONFIG_RTE_SCHED_VECTOR for arm

[Jan Viktorin]

Hello,

this what I was talking about at the Userspace Summit in Dublin...
Somebody adds a feature or change a default setting and it breaks
builds of other configurations and platforms. The current build system
in DPDK is really imperfect.

Thanks for catching this!

Regards
Jan V.

On Fri, 27 Nov 2015 19:04:26 +0530
Jerin Jacob <jerin.jacob@caviumnetworks.com> wrote:

> v1..v2
> created common arm64 configs under common_arm64 file.
> let  each armv8 machine targets  capture only the differences
> between the common arm64 config.
> 
> v2..v3
> Fix whitespace issue with git am
> 
> Jerin Jacob (2):
>   config: arm64: create common arm64 configs under common_arm64 file
>   config: disable CONFIG_RTE_SCHED_VECTOR for arm
> 
>  config/common_arm64                          | 49 ++++++++++++++++++++++++++++
>  config/defconfig_arm-armv7a-linuxapp-gcc     |  1 +
>  config/defconfig_arm64-armv8a-linuxapp-gcc   | 18 +---------
>  config/defconfig_arm64-thunderx-linuxapp-gcc | 18 +---------
>  config/defconfig_arm64-xgene1-linuxapp-gcc   | 18 +---------
>  5 files changed, 53 insertions(+), 51 deletions(-)
>  create mode 100644 config/common_arm64
> 



-- 
   Jan Viktorin                  E-mail: Viktorin@RehiveTech.com
   System Architect              Web:    www.RehiveTech.com
   RehiveTech
   Brno, Czech Republic

Re: [dpdk-dev] [PATCH v3 0/2] disable CONFIG_RTE_SCHED_VECTOR for arm

[Thomas Monjalon]

2015-11-27 15:40, Jan Viktorin:
> Hello,
> 
> this what I was talking about at the Userspace Summit in Dublin...
> Somebody adds a feature or change a default setting and it breaks
> builds of other configurations and platforms. The current build system
> in DPDK is really imperfect.

The issue is due to enablement of a new feature for every platforms without
dependency check.
Actually the patch should disable CONFIG_RTE_SCHED_VECTOR for every non-x86
platforms.
Another fix is discussed in another thread to disable the feature inside the
code if the platform cannot support it (currently AVX is required).

Re: [dpdk-dev] [PATCH v3 0/2] disable CONFIG_RTE_SCHED_VECTOR for arm

[Stephen Hemminger]

On Fri, 27 Nov 2015 19:04:26 +0530
Jerin Jacob <jerin.jacob@caviumnetworks.com> wrote:

> v1..v2
> created common arm64 configs under common_arm64 file.
> let  each armv8 machine targets  capture only the differences
> between the common arm64 config.
> 
> v2..v3
> Fix whitespace issue with git am
> 
> Jerin Jacob (2):
>   config: arm64: create common arm64 configs under common_arm64 file
>   config: disable CONFIG_RTE_SCHED_VECTOR for arm
> 
>  config/common_arm64                          | 49 ++++++++++++++++++++++++++++
>  config/defconfig_arm-armv7a-linuxapp-gcc     |  1 +
>  config/defconfig_arm64-armv8a-linuxapp-gcc   | 18 +---------
>  config/defconfig_arm64-thunderx-linuxapp-gcc | 18 +---------
>  config/defconfig_arm64-xgene1-linuxapp-gcc   | 18 +---------
>  5 files changed, 53 insertions(+), 51 deletions(-)
>  create mode 100644 config/common_arm64
> 

Since the RTE_SCHED_VECTOR is lightly tested and doesn't provide
really significant performance improvement, it should probably be disabled
by default on all platforms.