[dpdk-dev] [PATCH v3 0/4] vmxnet3 TSO and tx cksum offload

[dpdk-dev] [PATCH v3 0/4] vmxnet3 TSO and tx cksum offload

[Yong Wang]

v3:
* fixed comments from Stephen
* added performance number for tx data ring

v2:
* fixed some logging issues when debug option turned on
* updated the txq_flags check in vmxnet3_dev_tx_queue_setup()

This patchset adds TCP/UDP checksum offload and TSO to vmxnet3 PMD.
One of the use cases for these features is to support STT.  It also
restores the tx data ring feature that was removed from a previous
patch.

Yong Wang (4):
  vmxnet3: restore tx data ring support
  vmxnet3: add tx l4 cksum offload
  vmxnet3: add TSO support
  vmxnet3: announce device offload capability

 doc/guides/rel_notes/release_2_3.rst |  11 +++
 drivers/net/vmxnet3/vmxnet3_ethdev.c |  16 +++-
 drivers/net/vmxnet3/vmxnet3_ring.h   |  13 ---
 drivers/net/vmxnet3/vmxnet3_rxtx.c   | 162 +++++++++++++++++++++++++++--------
 4 files changed, 151 insertions(+), 51 deletions(-)

-- 
1.9.1

[dpdk-dev] [PATCH v3 1/4] vmxnet3: restore tx data ring support

[Yong Wang]

Tx data ring support was removed in a previous change
to add multi-seg transmit.  This change adds it back.

According to the original commit (2e849373), 64B pkt
rate with l2fwd improved by ~20% on an Ivy Bridge
server at which point we start to hit some bottleneck
on the rx side.

I also re-did the same test on a different setup (Haswell
processor, ~2.3GHz clock rate) on top of the master
and still observed ~17% performance gains.

Fixes: 7ba5de417e3c ("vmxnet3: support multi-segment transmit")

Signed-off-by: Yong Wang <yongwang@vmware.com>
---
 doc/guides/rel_notes/release_2_3.rst |  5 +++++
 drivers/net/vmxnet3/vmxnet3_rxtx.c   | 17 ++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/doc/guides/rel_notes/release_2_3.rst b/doc/guides/rel_notes/release_2_3.rst
index 99de186..a23c8ac 100644
--- a/doc/guides/rel_notes/release_2_3.rst
+++ b/doc/guides/rel_notes/release_2_3.rst
@@ -15,6 +15,11 @@ EAL
 Drivers
 ~~~~~~~
 
+* **vmxnet3: restore tx data ring.**
+
+  Tx data ring has been shown to improve small pkt forwarding performance
+  on vSphere environment.
+
 
 Libraries
 ~~~~~~~~~
diff --git a/drivers/net/vmxnet3/vmxnet3_rxtx.c b/drivers/net/vmxnet3/vmxnet3_rxtx.c
index 4de5d89..2202d31 100644
--- a/drivers/net/vmxnet3/vmxnet3_rxtx.c
+++ b/drivers/net/vmxnet3/vmxnet3_rxtx.c
@@ -348,6 +348,7 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		uint32_t first2fill, avail, dw2;
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		struct rte_mbuf *m_seg = txm;
+		int copy_size = 0;
 
 		/* Is this packet execessively fragmented, then drop */
 		if (unlikely(txm->nb_segs > VMXNET3_MAX_TXD_PER_PKT)) {
@@ -365,6 +366,14 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 			break;
 		}
 
+		if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
+			struct Vmxnet3_TxDataDesc *tdd;
+
+			tdd = txq->data_ring.base + txq->cmd_ring.next2fill;
+			copy_size = rte_pktmbuf_pkt_len(txm);
+			rte_memcpy(tdd->data, rte_pktmbuf_mtod(txm, char *), copy_size);
+		}
+
 		/* use the previous gen bit for the SOP desc */
 		dw2 = (txq->cmd_ring.gen ^ 0x1) << VMXNET3_TXD_GEN_SHIFT;
 		first2fill = txq->cmd_ring.next2fill;
@@ -377,7 +386,13 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 			   transmit buffer size (16K) is greater than
 			   maximum sizeof mbuf segment size. */
 			gdesc = txq->cmd_ring.base + txq->cmd_ring.next2fill;
-			gdesc->txd.addr = RTE_MBUF_DATA_DMA_ADDR(m_seg);
+			if (copy_size)
+				gdesc->txd.addr = rte_cpu_to_le_64(txq->data_ring.basePA +
+								txq->cmd_ring.next2fill *
+								sizeof(struct Vmxnet3_TxDataDesc));
+			else
+				gdesc->txd.addr = RTE_MBUF_DATA_DMA_ADDR(m_seg);
+
 			gdesc->dword[2] = dw2 | m_seg->data_len;
 			gdesc->dword[3] = 0;
 
-- 
1.9.1

[dpdk-dev] [PATCH v3 2/4] vmxnet3: add tx l4 cksum offload

[Yong Wang]

Support TCP/UDP checksum offload.

Signed-off-by: Yong Wang <yongwang@vmware.com>
---
 doc/guides/rel_notes/release_2_3.rst |  3 +++
 drivers/net/vmxnet3/vmxnet3_rxtx.c   | 39 +++++++++++++++++++++++++++---------
 2 files changed, 33 insertions(+), 9 deletions(-)

diff --git a/doc/guides/rel_notes/release_2_3.rst b/doc/guides/rel_notes/release_2_3.rst
index a23c8ac..58205fe 100644
--- a/doc/guides/rel_notes/release_2_3.rst
+++ b/doc/guides/rel_notes/release_2_3.rst
@@ -20,6 +20,9 @@ Drivers
   Tx data ring has been shown to improve small pkt forwarding performance
   on vSphere environment.
 
+* **vmxnet3: add tx l4 cksum offload.**
+
+  Support TCP/UDP checksum offload.
 
 Libraries
 ~~~~~~~~~
diff --git a/drivers/net/vmxnet3/vmxnet3_rxtx.c b/drivers/net/vmxnet3/vmxnet3_rxtx.c
index 2202d31..08e6115 100644
--- a/drivers/net/vmxnet3/vmxnet3_rxtx.c
+++ b/drivers/net/vmxnet3/vmxnet3_rxtx.c
@@ -332,6 +332,8 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 	uint16_t nb_tx;
 	vmxnet3_tx_queue_t *txq = tx_queue;
 	struct vmxnet3_hw *hw = txq->hw;
+	Vmxnet3_TxQueueCtrl *txq_ctrl = &txq->shared->ctrl;
+	uint32_t deferred = rte_le_to_cpu_32(txq_ctrl->txNumDeferred);
 
 	if (unlikely(txq->stopped)) {
 		PMD_TX_LOG(DEBUG, "Tx queue is stopped.");
@@ -413,21 +415,40 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 			gdesc->txd.tci = txm->vlan_tci;
 		}
 
-		/* TODO: Add transmit checksum offload here */
+		if (txm->ol_flags & PKT_TX_L4_MASK) {
+			gdesc->txd.om = VMXNET3_OM_CSUM;
+			gdesc->txd.hlen = txm->l2_len + txm->l3_len;
+
+			switch (txm->ol_flags & PKT_TX_L4_MASK) {
+			case PKT_TX_TCP_CKSUM:
+				gdesc->txd.msscof = gdesc->txd.hlen + offsetof(struct tcp_hdr, cksum);
+				break;
+			case PKT_TX_UDP_CKSUM:
+				gdesc->txd.msscof = gdesc->txd.hlen + offsetof(struct udp_hdr, dgram_cksum);
+				break;
+			default:
+				PMD_TX_LOG(WARNING, "requested cksum offload not supported %#llx",
+					   txm->ol_flags & PKT_TX_L4_MASK);
+				abort();
+			}
+		} else {
+			gdesc->txd.hlen = 0;
+			gdesc->txd.om = VMXNET3_OM_NONE;
+			gdesc->txd.msscof = 0;
+		}
+
+		txq_ctrl->txNumDeferred = rte_cpu_to_le_32(++deferred);
 
 		/* flip the GEN bit on the SOP */
 		rte_compiler_barrier();
 		gdesc->dword[2] ^= VMXNET3_TXD_GEN;
-
-		txq->shared->ctrl.txNumDeferred++;
 		nb_tx++;
 	}
 
-	PMD_TX_LOG(DEBUG, "vmxnet3 txThreshold: %u", txq->shared->ctrl.txThreshold);
-
-	if (txq->shared->ctrl.txNumDeferred >= txq->shared->ctrl.txThreshold) {
+	PMD_TX_LOG(DEBUG, "vmxnet3 txThreshold: %u", rte_le_to_cpu_32(txq_ctrl->txThreshold));
 
-		txq->shared->ctrl.txNumDeferred = 0;
+	if (deferred >= rte_le_to_cpu_32(txq_ctrl->txThreshold)) {
+		txq_ctrl->txNumDeferred = 0;
 		/* Notify vSwitch that packets are available. */
 		VMXNET3_WRITE_BAR0_REG(hw, (VMXNET3_REG_TXPROD + txq->queue_id * VMXNET3_REG_ALIGN),
 				       txq->cmd_ring.next2fill);
@@ -728,8 +749,8 @@ vmxnet3_dev_tx_queue_setup(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOXSUMS) !=
-	    ETH_TXQ_FLAGS_NOXSUMS) {
-		PMD_INIT_LOG(ERR, "TX no support for checksum offload yet");
+	    ETH_TXQ_FLAGS_NOXSUMSCTP) {
+		PMD_INIT_LOG(ERR, "SCTP checksum offload not supported");
 		return -EINVAL;
 	}
 
-- 
1.9.1

[dpdk-dev] [PATCH v3 3/4] vmxnet3: add TSO support

[Yong Wang]

This commit adds vmxnet3 TSO support.

Verified with test-pmd (set fwd csum) that both tso and
non-tso pkts can be successfully transmitted and all
segmentes for a tso pkt are correct on the receiver side.

Signed-off-by: Yong Wang <yongwang@vmware.com>
---
 doc/guides/rel_notes/release_2_3.rst |   3 +
 drivers/net/vmxnet3/vmxnet3_ring.h   |  13 -----
 drivers/net/vmxnet3/vmxnet3_rxtx.c   | 110 ++++++++++++++++++++++++++---------
 3 files changed, 85 insertions(+), 41 deletions(-)

diff --git a/doc/guides/rel_notes/release_2_3.rst b/doc/guides/rel_notes/release_2_3.rst
index 58205fe..ae487bb 100644
--- a/doc/guides/rel_notes/release_2_3.rst
+++ b/doc/guides/rel_notes/release_2_3.rst
@@ -24,6 +24,9 @@ Drivers
 
   Support TCP/UDP checksum offload.
 
+* **vmxnet3: add TSO support.**
+
+
 Libraries
 ~~~~~~~~~
 
diff --git a/drivers/net/vmxnet3/vmxnet3_ring.h b/drivers/net/vmxnet3/vmxnet3_ring.h
index 612487e..15b19e1 100644
--- a/drivers/net/vmxnet3/vmxnet3_ring.h
+++ b/drivers/net/vmxnet3/vmxnet3_ring.h
@@ -130,18 +130,6 @@ struct vmxnet3_txq_stats {
 	uint64_t	tx_ring_full;
 };
 
-typedef struct vmxnet3_tx_ctx {
-	int      ip_type;
-	bool     is_vlan;
-	bool     is_cso;
-
-	uint16_t evl_tag;		/* only valid when is_vlan == TRUE */
-	uint32_t eth_hdr_size;  /* only valid for pkts requesting tso or csum
-							 * offloading */
-	uint32_t ip_hdr_size;
-	uint32_t l4_hdr_size;
-} vmxnet3_tx_ctx_t;
-
 typedef struct vmxnet3_tx_queue {
 	struct vmxnet3_hw            *hw;
 	struct vmxnet3_cmd_ring      cmd_ring;
@@ -155,7 +143,6 @@ typedef struct vmxnet3_tx_queue {
 	uint8_t                      port_id;       /**< Device port identifier. */
 } vmxnet3_tx_queue_t;
 
-
 struct vmxnet3_rxq_stats {
 	uint64_t                     drop_total;
 	uint64_t                     drop_err;
diff --git a/drivers/net/vmxnet3/vmxnet3_rxtx.c b/drivers/net/vmxnet3/vmxnet3_rxtx.c
index 08e6115..fc879ee 100644
--- a/drivers/net/vmxnet3/vmxnet3_rxtx.c
+++ b/drivers/net/vmxnet3/vmxnet3_rxtx.c
@@ -295,27 +295,45 @@ vmxnet3_dev_clear_queues(struct rte_eth_dev *dev)
 	}
 }
 
+static int
+vmxnet3_unmap_pkt(uint16_t eop_idx, vmxnet3_tx_queue_t *txq)
+{
+	int completed = 0;
+	struct rte_mbuf *mbuf;
+
+	/* Release cmd_ring descriptor and free mbuf */
+	VMXNET3_ASSERT(txq->cmd_ring.base[eop_idx].txd.eop == 1);
+
+	mbuf = txq->cmd_ring.buf_info[eop_idx].m;
+	if (mbuf == NULL)
+		rte_panic("EOP desc does not point to a valid mbuf");
+	rte_pktmbuf_free(mbuf);
+
+	txq->cmd_ring.buf_info[eop_idx].m = NULL;
+
+	while (txq->cmd_ring.next2comp != eop_idx) {
+		/* no out-of-order completion */
+		VMXNET3_ASSERT(txq->cmd_ring.base[txq->cmd_ring.next2comp].txd.cq == 0);
+		vmxnet3_cmd_ring_adv_next2comp(&txq->cmd_ring);
+		completed++;
+	}
+
+	/* Mark the txd for which tcd was generated as completed */
+	vmxnet3_cmd_ring_adv_next2comp(&txq->cmd_ring);
+
+	return completed + 1;
+}
+
 static void
 vmxnet3_tq_tx_complete(vmxnet3_tx_queue_t *txq)
 {
 	int completed = 0;
-	struct rte_mbuf *mbuf;
 	vmxnet3_comp_ring_t *comp_ring = &txq->comp_ring;
 	struct Vmxnet3_TxCompDesc *tcd = (struct Vmxnet3_TxCompDesc *)
 		(comp_ring->base + comp_ring->next2proc);
 
 	while (tcd->gen == comp_ring->gen) {
-		/* Release cmd_ring descriptor and free mbuf */
-		VMXNET3_ASSERT(txq->cmd_ring.base[tcd->txdIdx].txd.eop == 1);
-		while (txq->cmd_ring.next2comp != tcd->txdIdx) {
-			mbuf = txq->cmd_ring.buf_info[txq->cmd_ring.next2comp].m;
-			txq->cmd_ring.buf_info[txq->cmd_ring.next2comp].m = NULL;
-			rte_pktmbuf_free_seg(mbuf);
-
-			/* Mark the txd for which tcd was generated as completed */
-			vmxnet3_cmd_ring_adv_next2comp(&txq->cmd_ring);
-			completed++;
-		}
+		completed += vmxnet3_unmap_pkt(tcd->txdIdx, txq);
 
 		vmxnet3_comp_ring_adv_next2proc(comp_ring);
 		tcd = (struct Vmxnet3_TxCompDesc *)(comp_ring->base +
@@ -351,21 +369,43 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		struct rte_mbuf *m_seg = txm;
 		int copy_size = 0;
+		bool tso = (txm->ol_flags & PKT_TX_TCP_SEG) != 0;
+		/* # of descriptors needed for a packet. */
+		unsigned count = txm->nb_segs;
 
-		/* Is this packet execessively fragmented, then drop */
-		if (unlikely(txm->nb_segs > VMXNET3_MAX_TXD_PER_PKT)) {
-			++txq->stats.drop_too_many_segs;
-			++txq->stats.drop_total;
+		avail = vmxnet3_cmd_ring_desc_avail(&txq->cmd_ring);
+		if (count > avail) {
+			/* Is command ring full? */
+			if (unlikely(avail == 0)) {
+				PMD_TX_LOG(DEBUG, "No free ring descriptors");
+				txq->stats.tx_ring_full++;
+				txq->stats.drop_total += (nb_pkts - nb_tx);
+				break;
+			}
+
+			/* Command ring is not full but cannot handle the
+			 * multi-segmented packet. Let's try the next packet
+			 * in this case.
+			 */
+			PMD_TX_LOG(DEBUG, "Running out of ring descriptors "
+				   "(avail %d needed %d)", avail, count);
+			txq->stats.drop_total++;
+			if (tso)
+				txq->stats.drop_tso++;
 			rte_pktmbuf_free(txm);
-			++nb_tx;
+			nb_tx++;
 			continue;
 		}
 
-		/* Is command ring full? */
-		avail = vmxnet3_cmd_ring_desc_avail(&txq->cmd_ring);
-		if (txm->nb_segs > avail) {
-			++txq->stats.tx_ring_full;
-			break;
+		/* Drop non-TSO packet that is excessively fragmented */
+		if (unlikely(!tso && count > VMXNET3_MAX_TXD_PER_PKT)) {
+			PMD_TX_LOG(ERROR, "Non-TSO packet cannot occupy more than %d tx "
+				   "descriptors. Packet dropped.", VMXNET3_MAX_TXD_PER_PKT);
+			txq->stats.drop_too_many_segs++;
+			txq->stats.drop_total++;
+			rte_pktmbuf_free(txm);
+			nb_tx++;
+			continue;
 		}
 
 		if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
@@ -382,11 +422,11 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		do {
 			/* Remember the transmit buffer for cleanup */
 			tbi = txq->cmd_ring.buf_info + txq->cmd_ring.next2fill;
-			tbi->m = m_seg;
 
 			/* NB: the following assumes that VMXNET3 maximum
-			   transmit buffer size (16K) is greater than
-			   maximum sizeof mbuf segment size. */
+			 * transmit buffer size (16K) is greater than
+			 * maximum size of mbuf segment size.
+			 */
 			gdesc = txq->cmd_ring.base + txq->cmd_ring.next2fill;
 			if (copy_size)
 				gdesc->txd.addr = rte_cpu_to_le_64(txq->data_ring.basePA +
@@ -405,6 +445,8 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 			dw2 = txq->cmd_ring.gen << VMXNET3_TXD_GEN_SHIFT;
 		} while ((m_seg = m_seg->next) != NULL);
 
+		/* set the last buf_info for the pkt */
+		tbi->m = txm;
 		/* Update the EOP descriptor */
 		gdesc->dword[3] |= VMXNET3_TXD_EOP | VMXNET3_TXD_CQ;
 
@@ -415,7 +457,17 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 			gdesc->txd.tci = txm->vlan_tci;
 		}
 
-		if (txm->ol_flags & PKT_TX_L4_MASK) {
+		if (tso) {
+			uint16_t mss = txm->tso_segsz;
+
+			VMXNET3_ASSERT(mss > 0);
+
+			gdesc->txd.hlen = txm->l2_len + txm->l3_len + txm->l4_len;
+			gdesc->txd.om = VMXNET3_OM_TSO;
+			gdesc->txd.msscof = mss;
+
+			deferred += (rte_pktmbuf_pkt_len(txm) - gdesc->txd.hlen + mss - 1) / mss;
+		} else if (txm->ol_flags & PKT_TX_L4_MASK) {
 			gdesc->txd.om = VMXNET3_OM_CSUM;
 			gdesc->txd.hlen = txm->l2_len + txm->l3_len;
 
@@ -431,13 +483,15 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 					   txm->ol_flags & PKT_TX_L4_MASK);
 				abort();
 			}
+			deferred++;
 		} else {
 			gdesc->txd.hlen = 0;
 			gdesc->txd.om = VMXNET3_OM_NONE;
 			gdesc->txd.msscof = 0;
+			deferred++;
 		}
 
-		txq_ctrl->txNumDeferred = rte_cpu_to_le_32(++deferred);
+		txq_ctrl->txNumDeferred = rte_cpu_to_le_32(deferred);
 
 		/* flip the GEN bit on the SOP */
 		rte_compiler_barrier();
@@ -634,7 +688,7 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 		if (unlikely(rxd->btype != VMXNET3_RXD_BTYPE_HEAD)) {
 			PMD_RX_LOG(DEBUG,
 				   "Alert : Misbehaving device, incorrect "
-				   " buffer type used. iPacket dropped.");
+				   " buffer type used. Packet dropped.");
 			rte_pktmbuf_free_seg(rbi->m);
 			goto rcd_done;
 		}
-- 
1.9.1

[dpdk-dev] [PATCH v3 4/4] vmxnet3: announce device offload capability

[Yong Wang]

Signed-off-by: Yong Wang <yongwang@vmware.com>
---
 drivers/net/vmxnet3/vmxnet3_ethdev.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_ethdev.c b/drivers/net/vmxnet3/vmxnet3_ethdev.c
index c363bf6..8a40127 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethdev.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethdev.c
@@ -693,7 +693,8 @@ vmxnet3_dev_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
 }
 
 static void
-vmxnet3_dev_info_get(__attribute__((unused))struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+vmxnet3_dev_info_get(__attribute__((unused))struct rte_eth_dev *dev,
+		     struct rte_eth_dev_info *dev_info)
 {
 	dev_info->max_rx_queues = VMXNET3_MAX_RX_QUEUES;
 	dev_info->max_tx_queues = VMXNET3_MAX_TX_QUEUES;
@@ -716,6 +717,17 @@ vmxnet3_dev_info_get(__attribute__((unused))struct rte_eth_dev *dev, struct rte_
 		.nb_min = VMXNET3_DEF_TX_RING_SIZE,
 		.nb_align = 1,
 	};
+
+	dev_info->rx_offload_capa =
+		DEV_RX_OFFLOAD_VLAN_STRIP |
+		DEV_RX_OFFLOAD_UDP_CKSUM |
+		DEV_RX_OFFLOAD_TCP_CKSUM;
+
+	dev_info->tx_offload_capa =
+		DEV_TX_OFFLOAD_VLAN_INSERT |
+		DEV_TX_OFFLOAD_TCP_CKSUM |
+		DEV_TX_OFFLOAD_UDP_CKSUM |
+		DEV_TX_OFFLOAD_TCP_TSO;
 }
 
 /* return 0 means link status changed, -1 means not changed */
@@ -819,7 +831,7 @@ vmxnet3_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vid, int on)
 	else
 		VMXNET3_CLEAR_VFTABLE_ENTRY(hw->shadow_vfta, vid);
 
-	/* don't change active filter if in promiscious mode */
+	/* don't change active filter if in promiscuous mode */
 	if (rxConf->rxMode & VMXNET3_RXM_PROMISC)
 		return 0;
 
-- 
1.9.1

Re: [dpdk-dev] [PATCH v3 1/4] vmxnet3: restore tx data ring support

[Stephen Hemminger]

On Tue,  5 Jan 2016 16:12:55 -0800
Yong Wang <yongwang@vmware.com> wrote:

> @@ -365,6 +366,14 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
>  			break;
>  		}
>  
> +		if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
> +			struct Vmxnet3_TxDataDesc *tdd;
> +
> +			tdd = txq->data_ring.base + txq->cmd_ring.next2fill;
> +			copy_size = rte_pktmbuf_pkt_len(txm);
> +			rte_memcpy(tdd->data, rte_pktmbuf_mtod(txm, char *), copy_size);
> +		}

Good idea to use a local region which optmizes the copy in the host,
but this implementation needs to be more general.

As written it is broken for multi-segment packets. A multi-segment
packet will have a pktlen >= datalen as in:
  m -> mb_segs=3, pktlen=1200, datalen=200
    -> datalen=900
    -> datalen=100

There are two ways to fix this. You could test for nb_segs == 1
or better yet. Optimize each segment it might be that the first
segment (or tail segment) would fit in the available data area.

Re: [dpdk-dev] [PATCH v3 2/4] vmxnet3: add tx l4 cksum offload

[Stephen Hemminger]

On Tue,  5 Jan 2016 16:12:56 -0800
Yong Wang <yongwang@vmware.com> wrote:

> -	if (txq->shared->ctrl.txNumDeferred >= txq->shared->ctrl.txThreshold) {
> +	PMD_TX_LOG(DEBUG, "vmxnet3 txThreshold: %u", rte_le_to_cpu_32(txq_ctrl->txThreshold));

For bisection, it would be good to split the byte-order fixes from the
offload changes; in other words make them different commits.

Re: [dpdk-dev] [PATCH v3 4/4] vmxnet3: announce device offload capability

[Stephen Hemminger]

On Tue,  5 Jan 2016 16:12:58 -0800
Yong Wang <yongwang@vmware.com> wrote:

>  
>  /* return 0 means link status changed, -1 means not changed */
> @@ -819,7 +831,7 @@ vmxnet3_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vid, int on)
>  	else
>  		VMXNET3_CLEAR_VFTABLE_ENTRY(hw->shadow_vfta, vid);
>  
> -	/* don't change active filter if in promiscious mode */
> +	/* don't change active filter if in promiscuous mode */

Maybe send a first patch in series with these message and comment cleanups?

Makes the review easier, and aides bisection.

Re: [dpdk-dev] [PATCH v3 1/4] vmxnet3: restore tx data ring support

[Yong Wang]

On 1/5/16, 4:48 PM, "Stephen Hemminger" <stephen@networkplumber.org> wrote:


>On Tue,  5 Jan 2016 16:12:55 -0800
>Yong Wang <yongwang@vmware.com> wrote:
>
>> @@ -365,6 +366,14 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
>>  			break;
>>  		}
>>  
>> +		if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
>> +			struct Vmxnet3_TxDataDesc *tdd;
>> +
>> +			tdd = txq->data_ring.base + txq->cmd_ring.next2fill;
>> +			copy_size = rte_pktmbuf_pkt_len(txm);
>> +			rte_memcpy(tdd->data, rte_pktmbuf_mtod(txm, char *), copy_size);
>> +		}
>
>Good idea to use a local region which optmizes the copy in the host,
>but this implementation needs to be more general.
>
>As written it is broken for multi-segment packets. A multi-segment
>packet will have a pktlen >= datalen as in:
>  m -> mb_segs=3, pktlen=1200, datalen=200
>    -> datalen=900
>    -> datalen=100
>
>There are two ways to fix this. You could test for nb_segs == 1
>or better yet. Optimize each segment it might be that the first
>segment (or tail segment) would fit in the available data area.

Currently the vmxnet3 backend has a limitation of 128B data area so
it should work even for the multi-segmented pkt shown above. But
I agree it does not work for all multi-segmented packets.  The
following packet will be such an example.

m -> nb_segs=3, pktlen=128, datalen=64
    -> datalen=32
    -> datalen=32


It’s unclear if/how we might get into such a multi-segmented pkt
but I agree we should handle this case.  Patch updated taking the
simple approach (checking for nb_segs == 1).  I’ll leave the
optimization as a future patch.

Re: [dpdk-dev] [PATCH v3 2/4] vmxnet3: add tx l4 cksum offload

[Yong Wang]

On 1/5/16, 4:51 PM, "Stephen Hemminger" <stephen@networkplumber.org> wrote:

>On Tue,  5 Jan 2016 16:12:56 -0800
>Yong Wang <yongwang@vmware.com> wrote:
>
>> -	if (txq->shared->ctrl.txNumDeferred >= txq->shared->ctrl.txThreshold) {
>> +	PMD_TX_LOG(DEBUG, "vmxnet3 txThreshold: %u", rte_le_to_cpu_32(txq_ctrl->txThreshold));
>
>For bisection, it would be good to split the byte-order fixes from the
>offload changes; in other words make them different commits.

Sure and patched updated.

Re: [dpdk-dev] [PATCH v3 4/4] vmxnet3: announce device offload capability

[Yong Wang]

On 1/5/16, 4:52 PM, "Stephen Hemminger" <stephen@networkplumber.org> wrote:

>On Tue,  5 Jan 2016 16:12:58 -0800
>Yong Wang <yongwang@vmware.com> wrote:
>
>>  
>>  /* return 0 means link status changed, -1 means not changed */
>> @@ -819,7 +831,7 @@ vmxnet3_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vid, int on)
>>  	else
>>  		VMXNET3_CLEAR_VFTABLE_ENTRY(hw->shadow_vfta, vid);
>>  
>> -	/* don't change active filter if in promiscious mode */
>> +	/* don't change active filter if in promiscuous mode */
>
>Maybe send a first patch in series with these message and comment cleanups?
>
>Makes the review easier, and aides bisection.

Sure and patch updated.

Re: [dpdk-dev] [PATCH v3 1/4] vmxnet3: restore tx data ring support

[Stephen Hemminger]

On Wed, 13 Jan 2016 02:20:01 +0000
Yong Wang <yongwang@vmware.com> wrote:

> >Good idea to use a local region which optmizes the copy in the host,
> >but this implementation needs to be more general.
> >
> >As written it is broken for multi-segment packets. A multi-segment
> >packet will have a pktlen >= datalen as in:
> >  m -> mb_segs=3, pktlen=1200, datalen=200  
> >    -> datalen=900
> >    -> datalen=100  
> >
> >There are two ways to fix this. You could test for nb_segs == 1
> >or better yet. Optimize each segment it might be that the first
> >segment (or tail segment) would fit in the available data area.  
> 
> Currently the vmxnet3 backend has a limitation of 128B data area so
> it should work even for the multi-segmented pkt shown above. But
> I agree it does not work for all multi-segmented packets.  The
> following packet will be such an example.
> 
> m -> nb_segs=3, pktlen=128, datalen=64
>     -> datalen=32
>     -> datalen=32  
> 
> 
> It’s unclear if/how we might get into such a multi-segmented pkt
> but I agree we should handle this case.  Patch updated taking the
> simple approach (checking for nb_segs == 1).  I’ll leave the
> optimization as a future patch.

Such a packet can happen when adding a tunnel header such as VXLAN
and the underlying packet is shared (refcnt > 1) or does not have
enough headroom for the tunnel header.