DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] mlx4: use dummy rxqs when a non-pow2 number is requested
@ 2016-03-21 16:08 Olivier Matz
  2016-03-21 16:45 ` Adrien Mazarguil
                   ` (3 more replies)
  0 siblings, 4 replies; 10+ messages in thread
From: Olivier Matz @ 2016-03-21 16:08 UTC (permalink / raw)
  To: dev; +Cc: adrien.mazarguil

When using RSS, the number of rxqs has to be a power of two.
This is a problem because there is no API is dpdk that makes
the application aware of that.

A good compromise is to allow the application to request a
number of rxqs that is not a power of 2, but having inactive
queues that will never receive packets. In this configuration,
a warning will be issued to users to let them know that
this is not an optimal configuration.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
 drivers/net/mlx4/mlx4.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
index cc4e9aa..eaf06db 100644
--- a/drivers/net/mlx4/mlx4.c
+++ b/drivers/net/mlx4/mlx4.c
@@ -698,7 +698,7 @@ txq_cleanup(struct txq *txq);
 
 static int
 rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
-	  unsigned int socket, const struct rte_eth_rxconf *conf,
+	  unsigned int socket, int inactive, const struct rte_eth_rxconf *conf,
 	  struct rte_mempool *mp);
 
 static void
@@ -734,12 +734,12 @@ dev_configure(struct rte_eth_dev *dev)
 	}
 	if (rxqs_n == priv->rxqs_n)
 		return 0;
-	if ((rxqs_n & (rxqs_n - 1)) != 0) {
-		ERROR("%p: invalid number of RX queues (%u),"
-		      " must be a power of 2",
+	if (!rte_is_power_of_2(rxqs_n)) {
+		WARN("%p: number of RX queues (%u), must be a"
+		      " power of 2: remaining queues will be inactive",
 		      (void *)dev, rxqs_n);
-		return EINVAL;
 	}
+
 	INFO("%p: RX queues number update: %u -> %u",
 	     (void *)dev, priv->rxqs_n, rxqs_n);
 	/* If RSS is enabled, disable it first. */
@@ -775,7 +775,7 @@ dev_configure(struct rte_eth_dev *dev)
 	priv->rss = 1;
 	tmp = priv->rxqs_n;
 	priv->rxqs_n = rxqs_n;
-	ret = rxq_setup(dev, &priv->rxq_parent, 0, 0, NULL, NULL);
+	ret = rxq_setup(dev, &priv->rxq_parent, 0, 0, 0, NULL, NULL);
 	if (!ret)
 		return 0;
 	/* Failure, rollback. */
@@ -3466,7 +3466,8 @@ rxq_setup_qp_rss(struct priv *priv, struct ibv_cq *cq, uint16_t desc,
 		attr.qpg.qpg_type = IBV_EXP_QPG_PARENT;
 		/* TSS isn't necessary. */
 		attr.qpg.parent_attrib.tss_child_count = 0;
-		attr.qpg.parent_attrib.rss_child_count = priv->rxqs_n;
+		attr.qpg.parent_attrib.rss_child_count =
+			rte_align32pow2(priv->rxqs_n + 1) >> 1;
 		DEBUG("initializing parent RSS queue");
 	} else {
 		attr.qpg.qpg_type = IBV_EXP_QPG_CHILD_RX;
@@ -3689,6 +3690,9 @@ skip_rtr:
  *   Number of descriptors to configure in queue.
  * @param socket
  *   NUMA socket on which memory must be allocated.
+ * @param inactive
+ *   If true, the queue is disabled because its index is higher or
+ *   equal to the real number of queues, which must be a power of 2.
  * @param[in] conf
  *   Thresholds parameters.
  * @param mp
@@ -3699,7 +3703,7 @@ skip_rtr:
  */
 static int
 rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
-	  unsigned int socket, const struct rte_eth_rxconf *conf,
+	  unsigned int socket, int inactive, const struct rte_eth_rxconf *conf,
 	  struct rte_mempool *mp)
 {
 	struct priv *priv = dev->data->dev_private;
@@ -3800,7 +3804,7 @@ skip_mr:
 	DEBUG("priv->device_attr.max_sge is %d",
 	      priv->device_attr.max_sge);
 #ifdef RSS_SUPPORT
-	if (priv->rss)
+	if (priv->rss && !inactive)
 		tmpl.qp = rxq_setup_qp_rss(priv, tmpl.cq, desc, parent,
 					   tmpl.rd);
 	else
@@ -3936,6 +3940,7 @@ mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 {
 	struct priv *priv = dev->data->dev_private;
 	struct rxq *rxq = (*priv->rxqs)[idx];
+	int inactive = 0;
 	int ret;
 
 	if (mlx4_is_secondary())
@@ -3967,7 +3972,9 @@ mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 			return -ENOMEM;
 		}
 	}
-	ret = rxq_setup(dev, rxq, desc, socket, conf, mp);
+	if (idx >= rte_align32pow2(priv->rxqs_n + 1) >> 1)
+		inactive = 1;
+	ret = rxq_setup(dev, rxq, desc, socket, inactive, conf, mp);
 	if (ret)
 		rte_free(rxq);
 	else {
-- 
2.1.4

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2016-04-15  9:11 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-21 16:08 [dpdk-dev] [PATCH] mlx4: use dummy rxqs when a non-pow2 number is requested Olivier Matz
2016-03-21 16:45 ` Adrien Mazarguil
2016-03-21 17:38 ` Wiles, Keith
2016-03-22  9:48   ` Olivier Matz
2016-03-22 14:27     ` Wiles, Keith
2016-04-15  9:11       ` Olivier Matz
2016-03-24 12:20 ` Bruce Richardson
2016-03-24 12:25   ` Olivier Matz
2016-03-25 10:24 ` [dpdk-dev] [PATCH v2] " Olivier Matz
2016-03-25 15:18   ` Bruce Richardson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).