DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
@ 2016-09-07  4:18 souvikdey33
  2016-09-07  4:21 ` Dey, Souvik
  0 siblings, 1 reply; 19+ messages in thread
From: souvikdey33 @ 2016-09-07  4:18 UTC (permalink / raw)
  To: dev, stephen, yuanhan.liu; +Cc: souvikdey33


Virtio interfaces should also support setting of mtu, as in case of cloud
it is expected to have the consistent mtu across the infrastructure that
the dhcp server sends and not hardcoded to 1500(default).

Changes in v4: Incorporated review comments.
Changes in v3: Corrected few style errors as reported by sys-stv.
Changes in v2: Incorporated review comments.

Signed-off-by: Souvik Dey <sodey@sonusnet.com>

---
 drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 07d6449..da16ad4 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev *dev,
 static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
 static void virtio_mac_addr_set(struct rte_eth_dev *dev,
 				struct ether_addr *mac_addr);
+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 
 static int virtio_dev_queue_stats_mapping_set(
 	__rte_unused struct rte_eth_dev *eth_dev,
@@ -652,6 +653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
 		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");
 }
 
+static int
+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
+		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /*
  * dev_ops for virtio, bare necessities for basic operation
  */
@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
+	.mtu_set                 = virtio_mtu_set,
 
 	.dev_infos_get           = virtio_dev_info_get,
 	.stats_get               = virtio_dev_stats_get,
-- 
2.9.3.windows.1

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-07  4:18 [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio souvikdey33
@ 2016-09-07  4:21 ` Dey, Souvik
  2016-09-09  7:00   ` Yuanhan Liu
  0 siblings, 1 reply; 19+ messages in thread
From: Dey, Souvik @ 2016-09-07  4:21 UTC (permalink / raw)
  To: dev, stephen, yuanhan.liu

Hi Liu,
	Submitted the version 4 of the patch as you suggested , and have removed the Reviewed by line.
I have still kept the function definition as to follow the same suit as we have done for other eth_dev_ops.

--
Regards,
Souvik

-----Original Message-----
From: Dey, Souvik 
Sent: Wednesday, September 7, 2016 12:19 AM
To: dev@dpdk.org; stephen@networkplumber.org; yuanhan.liu@linux.intel.com
Cc: Dey, Souvik <sodey@sonusnet.com>
Subject: [PATCH v4]net/virtio: add mtu set in virtio


Virtio interfaces should also support setting of mtu, as in case of cloud it is expected to have the consistent mtu across the infrastructure that the dhcp server sends and not hardcoded to 1500(default).

Changes in v4: Incorporated review comments.
Changes in v3: Corrected few style errors as reported by sys-stv.
Changes in v2: Incorporated review comments.

Signed-off-by: Souvik Dey <sodey@sonusnet.com>

---
 drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 07d6449..da16ad4 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev *dev,  static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);  static void virtio_mac_addr_set(struct rte_eth_dev *dev,
 				struct ether_addr *mac_addr);
+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 
 static int virtio_dev_queue_stats_mapping_set(
 	__rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
 		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
 
+static int
+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
+	struct virtio_hw *hw = dev->data->dev_private;
+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
+		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /*
  * dev_ops for virtio, bare necessities for basic operation
  */
@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
+	.mtu_set                 = virtio_mtu_set,
 
 	.dev_infos_get           = virtio_dev_info_get,
 	.stats_get               = virtio_dev_stats_get,
--
2.9.3.windows.1

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-07  4:21 ` Dey, Souvik
@ 2016-09-09  7:00   ` Yuanhan Liu
  2016-09-09 14:19     ` Dey, Souvik
  0 siblings, 1 reply; 19+ messages in thread
From: Yuanhan Liu @ 2016-09-09  7:00 UTC (permalink / raw)
  To: Dey, Souvik; +Cc: dev, stephen

On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
> Hi Liu,
> 	Submitted the version 4 of the patch as you suggested ,

Your patch is looking much better. But not really, you ignored few of
my comments.

> and have removed the Reviewed by line.
> I have still kept the function definition as to follow the same suit as we have done for other eth_dev_ops.

That's because most of the method implementions are after the reference,
thus the declaration is needed.

For your case, I see no good reason to do that. BTW, if you disagree
with my comment, you shoud made a reply, instead of rushing to sending
a new version.

> --
> Regards,
> Souvik
> 
> -----Original Message-----
> From: Dey, Souvik 
> Sent: Wednesday, September 7, 2016 12:19 AM
> To: dev@dpdk.org; stephen@networkplumber.org; yuanhan.liu@linux.intel.com
> Cc: Dey, Souvik <sodey@sonusnet.com>
> Subject: [PATCH v4]net/virtio: add mtu set in virtio
> 
> 
> Virtio interfaces should also support setting of mtu, as in case of cloud it is expected to have the consistent mtu across the infrastructure that the dhcp server sends and not hardcoded to 1500(default).
> 
> Changes in v4: Incorporated review comments.
> Changes in v3: Corrected few style errors as reported by sys-stv.
> Changes in v2: Incorporated review comments.

DPDK prefers to put the change log to ...
> 
> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
> 
> ---

... here.

So that they will be showed in mailing list (for review), but they will
be gone after apply. In another word, we don't like to see those change
log in git history, but we'd like to see them while review.

>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index 07d6449..da16ad4 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev *dev,  static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);  static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>  				struct ether_addr *mac_addr);
> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>  
>  static int virtio_dev_queue_stats_mapping_set(
>  	__rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>  		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
>  
> +static int
> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
> +	struct virtio_hw *hw = dev->data->dev_private;
> +	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
> +		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

I still saw those numbers.

	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09  7:00   ` Yuanhan Liu
@ 2016-09-09 14:19     ` Dey, Souvik
  2016-09-09 15:05       ` Kavanagh, Mark B
  0 siblings, 1 reply; 19+ messages in thread
From: Dey, Souvik @ 2016-09-09 14:19 UTC (permalink / raw)
  To: Yuanhan Liu; +Cc: dev, stephen

Hi Liu,

Yes agreed your comment. I will definitely remove the declaration as it is not really required. 
 So the latest patch will look like this . Yes I did rush a bit to submit the patch last will correct my suite. So sending the patch in a reply if we have more comments we can take a look and they re-submit the final reviewed patch. Thanks for the help though. 

---
 drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 07d6449..da16ad4 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c

+static int
+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
+		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /*
  * dev_ops for virtio, bare necessities for basic operation
  */
@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
+	.mtu_set                 = virtio_mtu_set,
 
 	.dev_infos_get           = virtio_dev_info_get,
 	.stats_get               = virtio_dev_stats_get,
--

--
Regards,
Souvik

-----Original Message-----
From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com] 
Sent: Friday, September 9, 2016 3:00 AM
To: Dey, Souvik <sodey@sonusnet.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio

On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
> Hi Liu,
> 	Submitted the version 4 of the patch as you suggested ,

Your patch is looking much better. But not really, you ignored few of my comments.

> and have removed the Reviewed by line.
> I have still kept the function definition as to follow the same suit as we have done for other eth_dev_ops.

That's because most of the method implementions are after the reference, thus the declaration is needed.

For your case, I see no good reason to do that. BTW, if you disagree with my comment, you shoud made a reply, instead of rushing to sending a new version.

> --
> Regards,
> Souvik
> 
> -----Original Message-----
> From: Dey, Souvik
> Sent: Wednesday, September 7, 2016 12:19 AM
> To: dev@dpdk.org; stephen@networkplumber.org; 
> yuanhan.liu@linux.intel.com
> Cc: Dey, Souvik <sodey@sonusnet.com>
> Subject: [PATCH v4]net/virtio: add mtu set in virtio
> 
> 
> Virtio interfaces should also support setting of mtu, as in case of cloud it is expected to have the consistent mtu across the infrastructure that the dhcp server sends and not hardcoded to 1500(default).
> 
> Changes in v4: Incorporated review comments.
> Changes in v3: Corrected few style errors as reported by sys-stv.
> Changes in v2: Incorporated review comments.

DPDK prefers to put the change log to ...
> 
> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
> 
> ---

... here.

So that they will be showed in mailing list (for review), but they will be gone after apply. In another word, we don't like to see those change log in git history, but we'd like to see them while review.

>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/net/virtio/virtio_ethdev.c 
> b/drivers/net/virtio/virtio_ethdev.c
> index 07d6449..da16ad4 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev *dev,  static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);  static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>  				struct ether_addr *mac_addr);
> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>  
>  static int virtio_dev_queue_stats_mapping_set(
>  	__rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>  		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
>  
> +static int
> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
> +	struct virtio_hw *hw = dev->data->dev_private;
> +	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
> +		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

I still saw those numbers.

	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09 14:19     ` Dey, Souvik
@ 2016-09-09 15:05       ` Kavanagh, Mark B
  2016-09-09 15:33         ` Dey, Souvik
  0 siblings, 1 reply; 19+ messages in thread
From: Kavanagh, Mark B @ 2016-09-09 15:05 UTC (permalink / raw)
  To: Dey, Souvik, Yuanhan Liu; +Cc: dev, stephen

>
>Hi Liu,
>
>Yes agreed your comment. I will definitely remove the declaration as it is not really
>required.
> So the latest patch will look like this . Yes I did rush a bit to submit the patch last will
>correct my suite. So sending the patch in a reply if we have more comments we can take a look
>and they re-submit the final reviewed patch. Thanks for the help though.
>
>---
> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
>diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
>index 07d6449..da16ad4 100644
>--- a/drivers/net/virtio/virtio_ethdev.c
>+++ b/drivers/net/virtio/virtio_ethdev.c
>
>+static int
>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
>+{
>+	struct virtio_hw *hw = dev->data->dev_private;
>+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>+		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

Hi Souvik,

Why hardcode the values in the PMD_INIT_LOG?

Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d and %d", 
							 VIRTIO_MIN_RX_BUFSIZE,
					            VIRTIO_MAX_RX_PKTLEN);

That way, if the values that the macros evaluate to change, the log will update correspondingly.

Also, does 'MTU' in this context relate to the L2 or L3 MTU?

>+		return -EINVAL;
>+	}
>+	return 0;
>+}
>+
> /*
>  * dev_ops for virtio, bare necessities for basic operation
>  */
>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
> 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
> 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
> 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
>+	.mtu_set                 = virtio_mtu_set,
>
> 	.dev_infos_get           = virtio_dev_info_get,
> 	.stats_get               = virtio_dev_stats_get,
>--
>
>--
>Regards,
>Souvik
>
>-----Original Message-----
>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>Sent: Friday, September 9, 2016 3:00 AM
>To: Dey, Souvik <sodey@sonusnet.com>
>Cc: dev@dpdk.org; stephen@networkplumber.org
>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>
>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>> Hi Liu,
>> 	Submitted the version 4 of the patch as you suggested ,
>
>Your patch is looking much better. But not really, you ignored few of my comments.
>
>> and have removed the Reviewed by line.
>> I have still kept the function definition as to follow the same suit as we have done for
>other eth_dev_ops.
>
>That's because most of the method implementions are after the reference, thus the declaration
>is needed.
>
>For your case, I see no good reason to do that. BTW, if you disagree with my comment, you
>shoud made a reply, instead of rushing to sending a new version.
>
>> --
>> Regards,
>> Souvik
>>
>> -----Original Message-----
>> From: Dey, Souvik
>> Sent: Wednesday, September 7, 2016 12:19 AM
>> To: dev@dpdk.org; stephen@networkplumber.org;
>> yuanhan.liu@linux.intel.com
>> Cc: Dey, Souvik <sodey@sonusnet.com>
>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>
>> Virtio interfaces should also support setting of mtu, as in case of cloud it is expected to
>have the consistent mtu across the infrastructure that the dhcp server sends and not
>hardcoded to 1500(default).
>>
>> Changes in v4: Incorporated review comments.
>> Changes in v3: Corrected few style errors as reported by sys-stv.
>> Changes in v2: Incorporated review comments.
>
>DPDK prefers to put the change log to ...
>>
>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>
>> ---
>
>... here.
>
>So that they will be showed in mailing list (for review), but they will be gone after apply.
>In another word, we don't like to see those change log in git history, but we'd like to see
>them while review.
>
>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>> b/drivers/net/virtio/virtio_ethdev.c
>> index 07d6449..da16ad4 100644
>> --- a/drivers/net/virtio/virtio_ethdev.c
>> +++ b/drivers/net/virtio/virtio_ethdev.c
>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev *dev,  static void
>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);  static void
>virtio_mac_addr_set(struct rte_eth_dev *dev,
>>  				struct ether_addr *mac_addr);
>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>>
>>  static int virtio_dev_queue_stats_mapping_set(
>>  	__rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@
>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>  		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
>>
>> +static int
>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>> +	struct virtio_hw *hw = dev->data->dev_private;
>> +	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>> +		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
>
>I still saw those numbers.
>
>	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09 15:05       ` Kavanagh, Mark B
@ 2016-09-09 15:33         ` Dey, Souvik
  2016-09-09 15:42           ` Yuanhan Liu
  2016-09-09 15:43           ` Kavanagh, Mark B
  0 siblings, 2 replies; 19+ messages in thread
From: Dey, Souvik @ 2016-09-09 15:33 UTC (permalink / raw)
  To: Kavanagh, Mark B, Yuanhan Liu; +Cc: dev, stephen

Hi Mark,

Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it . Thanks. 
The MTU here is L3 MTU.  Setting this will help in reducing the fragmented/multi-segmented packets and also in case we want to reduce the MTU below 1500, to support VXLAN or GRE tunnel for the packets in openstack and cloud environments.  

---
 drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 07d6449..da16ad4 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c

static int virtio_dev_queue_stats_mapping_set(
 	__rte_unused struct rte_eth_dev *eth_dev,
@@ -652,6 +653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
 		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");
 }
 
+static int
+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
+		PMD_INIT_LOG(ERR, "Mtu should be between VIRTIO_MIN_RX_BUFSIZE and VIRTIO_MAX_RX_PKTLEN \n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /*
  * dev_ops for virtio, bare necessities for basic operation
  */
@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
+	.mtu_set                 = virtio_mtu_set,
 
 	.dev_infos_get           = virtio_dev_info_get,
 	.stats_get               = virtio_dev_stats_get,
--

--
Regards,
Souvik
-----Original Message-----
From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com] 
Sent: Friday, September 9, 2016 11:05 AM
To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio

>
>Hi Liu,
>
>Yes agreed your comment. I will definitely remove the declaration as it 
>is not really required.
> So the latest patch will look like this . Yes I did rush a bit to 
>submit the patch last will correct my suite. So sending the patch in a 
>reply if we have more comments we can take a look and they re-submit the final reviewed patch. Thanks for the help though.
>
>---
> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
>diff --git a/drivers/net/virtio/virtio_ethdev.c 
>b/drivers/net/virtio/virtio_ethdev.c
>index 07d6449..da16ad4 100644
>--- a/drivers/net/virtio/virtio_ethdev.c
>+++ b/drivers/net/virtio/virtio_ethdev.c
>
>+static int
>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>+	struct virtio_hw *hw = dev->data->dev_private;
>+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>+		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

Hi Souvik,

Why hardcode the values in the PMD_INIT_LOG?

Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d and %d", 
							 VIRTIO_MIN_RX_BUFSIZE,
					            VIRTIO_MAX_RX_PKTLEN);

That way, if the values that the macros evaluate to change, the log will update correspondingly.

Also, does 'MTU' in this context relate to the L2 or L3 MTU?

>+		return -EINVAL;
>+	}
>+	return 0;
>+}
>+
> /*
>  * dev_ops for virtio, bare necessities for basic operation
>  */
>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
> 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
> 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
> 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
>+	.mtu_set                 = virtio_mtu_set,
>
> 	.dev_infos_get           = virtio_dev_info_get,
> 	.stats_get               = virtio_dev_stats_get,
>--
>
>--
>Regards,
>Souvik
>
>-----Original Message-----
>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>Sent: Friday, September 9, 2016 3:00 AM
>To: Dey, Souvik <sodey@sonusnet.com>
>Cc: dev@dpdk.org; stephen@networkplumber.org
>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>
>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>> Hi Liu,
>> 	Submitted the version 4 of the patch as you suggested ,
>
>Your patch is looking much better. But not really, you ignored few of my comments.
>
>> and have removed the Reviewed by line.
>> I have still kept the function definition as to follow the same suit 
>> as we have done for
>other eth_dev_ops.
>
>That's because most of the method implementions are after the 
>reference, thus the declaration is needed.
>
>For your case, I see no good reason to do that. BTW, if you disagree 
>with my comment, you shoud made a reply, instead of rushing to sending a new version.
>
>> --
>> Regards,
>> Souvik
>>
>> -----Original Message-----
>> From: Dey, Souvik
>> Sent: Wednesday, September 7, 2016 12:19 AM
>> To: dev@dpdk.org; stephen@networkplumber.org; 
>> yuanhan.liu@linux.intel.com
>> Cc: Dey, Souvik <sodey@sonusnet.com>
>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>
>> Virtio interfaces should also support setting of mtu, as in case of 
>> cloud it is expected to
>have the consistent mtu across the infrastructure that the dhcp server 
>sends and not hardcoded to 1500(default).
>>
>> Changes in v4: Incorporated review comments.
>> Changes in v3: Corrected few style errors as reported by sys-stv.
>> Changes in v2: Incorporated review comments.
>
>DPDK prefers to put the change log to ...
>>
>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>
>> ---
>
>... here.
>
>So that they will be showed in mailing list (for review), but they will be gone after apply.
>In another word, we don't like to see those change log in git history, 
>but we'd like to see them while review.
>
>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>> b/drivers/net/virtio/virtio_ethdev.c
>> index 07d6449..da16ad4 100644
>> --- a/drivers/net/virtio/virtio_ethdev.c
>> +++ b/drivers/net/virtio/virtio_ethdev.c
>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev 
>> *dev,  static void
>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);  
>static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>>  				struct ether_addr *mac_addr);
>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>>
>>  static int virtio_dev_queue_stats_mapping_set(
>>  	__rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@
>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>  		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
>>
>> +static int
>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>> +	struct virtio_hw *hw = dev->data->dev_private;
>> +	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>> +		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
>
>I still saw those numbers.
>
>	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09 15:33         ` Dey, Souvik
@ 2016-09-09 15:42           ` Yuanhan Liu
  2016-09-09 15:43           ` Kavanagh, Mark B
  1 sibling, 0 replies; 19+ messages in thread
From: Yuanhan Liu @ 2016-09-09 15:42 UTC (permalink / raw)
  To: Dey, Souvik; +Cc: Kavanagh, Mark B, dev, stephen

On Fri, Sep 09, 2016 at 03:33:32PM +0000, Dey, Souvik wrote:
> Hi Mark,
> 
> Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it . Thanks. 
> The MTU here is L3 MTU.  Setting this will help in reducing the fragmented/multi-segmented packets and also in case we want to reduce the MTU below 1500, to support VXLAN or GRE tunnel for the packets in openstack and cloud environments.  
> 
> ---
>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index 07d6449..da16ad4 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> 
> static int virtio_dev_queue_stats_mapping_set(
>  	__rte_unused struct rte_eth_dev *eth_dev,
> @@ -652,6 +653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>  		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");
>  }
>  
> +static int
> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
> +		PMD_INIT_LOG(ERR, "Mtu should be between VIRTIO_MIN_RX_BUFSIZE and VIRTIO_MAX_RX_PKTLEN \n");

Unfortunately, that is still broken, in two ways:

- we should avoid long lines over 80 chars

- the range will not be correctly showed in the message, because ... (well,
  you know it).

	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09 15:33         ` Dey, Souvik
  2016-09-09 15:42           ` Yuanhan Liu
@ 2016-09-09 15:43           ` Kavanagh, Mark B
  2016-09-09 18:16             ` Dey, Souvik
  1 sibling, 1 reply; 19+ messages in thread
From: Kavanagh, Mark B @ 2016-09-09 15:43 UTC (permalink / raw)
  To: Dey, Souvik, Yuanhan Liu; +Cc: dev, stephen

>
>Hi Mark,
>
>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .
>Thanks.
>The MTU here is L3 MTU.  Setting this will help in reducing the fragmented/multi-segmented
>packets and also in case we want to reduce the MTU below 1500, to support VXLAN or GRE tunnel
>for the packets in openstack and cloud environments.
>
>---
> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
>diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
>index 07d6449..da16ad4 100644
>--- a/drivers/net/virtio/virtio_ethdev.c
>+++ b/drivers/net/virtio/virtio_ethdev.c
>
>static int virtio_dev_queue_stats_mapping_set(
> 	__rte_unused struct rte_eth_dev *eth_dev,
>@@ -652,6 +653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
> 		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");
> }
>
>+static int
>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
>+{
>+	struct virtio_hw *hw = dev->data->dev_private;
>+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {

If MTU is the L3 MTU as you've indicated, then you need to take account of L2 overhead before performing the comparison above.
Say the user supplies 'mtu' as 9728 - the corresponding minimum frame size is L2_HDR_LEN + 9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can accommodate (note that 9728 is the largest L2 frame size allowed by the NIC, not the largest IP packet size).

>+		PMD_INIT_LOG(ERR, "Mtu should be between VIRTIO_MIN_RX_BUFSIZE and
>VIRTIO_MAX_RX_PKTLEN \n");

Two things on this statement:
1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely means very little, and as such is not helpful. I suggest going with the format that I included in my earlier mail, which prints the numeric value of the min and max rx defines
2) <micronit> MTU is an initialization, and should be printed as such in a log (i.e. all caps) </micronit>

Hope this helps,
Mark

>+		return -EINVAL;
>+	}
>+	return 0;
>+}
>+
> /*
>  * dev_ops for virtio, bare necessities for basic operation
>  */
>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
> 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
> 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
> 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
>+	.mtu_set                 = virtio_mtu_set,
>
> 	.dev_infos_get           = virtio_dev_info_get,
> 	.stats_get               = virtio_dev_stats_get,
>--
>
>--
>Regards,
>Souvik
>-----Original Message-----
>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>Sent: Friday, September 9, 2016 11:05 AM
>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
>Cc: dev@dpdk.org; stephen@networkplumber.org
>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>
>>
>>Hi Liu,
>>
>>Yes agreed your comment. I will definitely remove the declaration as it
>>is not really required.
>> So the latest patch will look like this . Yes I did rush a bit to
>>submit the patch last will correct my suite. So sending the patch in a
>>reply if we have more comments we can take a look and they re-submit the final reviewed
>patch. Thanks for the help though.
>>
>>---
>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>b/drivers/net/virtio/virtio_ethdev.c
>>index 07d6449..da16ad4 100644
>>--- a/drivers/net/virtio/virtio_ethdev.c
>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>
>>+static int
>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>+	struct virtio_hw *hw = dev->data->dev_private;
>>+	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>>+		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
>
>Hi Souvik,
>
>Why hardcode the values in the PMD_INIT_LOG?
>
>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d and %d",
>							 VIRTIO_MIN_RX_BUFSIZE,
>					            VIRTIO_MAX_RX_PKTLEN);
>
>That way, if the values that the macros evaluate to change, the log will update
>correspondingly.
>
>Also, does 'MTU' in this context relate to the L2 or L3 MTU?
>
>>+		return -EINVAL;
>>+	}
>>+	return 0;
>>+}
>>+
>> /*
>>  * dev_ops for virtio, bare necessities for basic operation
>>  */
>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
>> 	.promiscuous_disable     = virtio_dev_promiscuous_disable,
>> 	.allmulticast_enable     = virtio_dev_allmulticast_enable,
>> 	.allmulticast_disable    = virtio_dev_allmulticast_disable,
>>+	.mtu_set                 = virtio_mtu_set,
>>
>> 	.dev_infos_get           = virtio_dev_info_get,
>> 	.stats_get               = virtio_dev_stats_get,
>>--
>>
>>--
>>Regards,
>>Souvik
>>
>>-----Original Message-----
>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>>Sent: Friday, September 9, 2016 3:00 AM
>>To: Dey, Souvik <sodey@sonusnet.com>
>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>>> Hi Liu,
>>> 	Submitted the version 4 of the patch as you suggested ,
>>
>>Your patch is looking much better. But not really, you ignored few of my comments.
>>
>>> and have removed the Reviewed by line.
>>> I have still kept the function definition as to follow the same suit
>>> as we have done for
>>other eth_dev_ops.
>>
>>That's because most of the method implementions are after the
>>reference, thus the declaration is needed.
>>
>>For your case, I see no good reason to do that. BTW, if you disagree
>>with my comment, you shoud made a reply, instead of rushing to sending a new version.
>>
>>> --
>>> Regards,
>>> Souvik
>>>
>>> -----Original Message-----
>>> From: Dey, Souvik
>>> Sent: Wednesday, September 7, 2016 12:19 AM
>>> To: dev@dpdk.org; stephen@networkplumber.org;
>>> yuanhan.liu@linux.intel.com
>>> Cc: Dey, Souvik <sodey@sonusnet.com>
>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>>
>>>
>>> Virtio interfaces should also support setting of mtu, as in case of
>>> cloud it is expected to
>>have the consistent mtu across the infrastructure that the dhcp server
>>sends and not hardcoded to 1500(default).
>>>
>>> Changes in v4: Incorporated review comments.
>>> Changes in v3: Corrected few style errors as reported by sys-stv.
>>> Changes in v2: Incorporated review comments.
>>
>>DPDK prefers to put the change log to ...
>>>
>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>>
>>> ---
>>
>>... here.
>>
>>So that they will be showed in mailing list (for review), but they will be gone after apply.
>>In another word, we don't like to see those change log in git history,
>>but we'd like to see them while review.
>>
>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>  1 file changed, 12 insertions(+)
>>>
>>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>>> b/drivers/net/virtio/virtio_ethdev.c
>>> index 07d6449..da16ad4 100644
>>> --- a/drivers/net/virtio/virtio_ethdev.c
>>> +++ b/drivers/net/virtio/virtio_ethdev.c
>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev
>>> *dev,  static void
>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>>>  				struct ether_addr *mac_addr);
>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>>>
>>>  static int virtio_dev_queue_stats_mapping_set(
>>>  	__rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@
>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>  		PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
>>>
>>> +static int
>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>> +	struct virtio_hw *hw = dev->data->dev_private;
>>> +	if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>>> +		PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
>>
>>I still saw those numbers.
>>
>>	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09 15:43           ` Kavanagh, Mark B
@ 2016-09-09 18:16             ` Dey, Souvik
  2016-09-12 14:25               ` Dey, Souvik
  2016-09-12 14:47               ` Kavanagh, Mark B
  0 siblings, 2 replies; 19+ messages in thread
From: Dey, Souvik @ 2016-09-09 18:16 UTC (permalink / raw)
  To: Kavanagh, Mark B, Yuanhan Liu; +Cc: dev, stephen

Hi Mark/Liu,

              Thanks to both of you for being so patient with a series of silly errors. I have tried to make it better this time. Also there were some un-used variable in the function which I have removed. Please check the new patch with all your comments incorporated. Also along with the L2_HDR_LEN and L2_CRC_LEN, I have taken in consideration the VLAN_LEN too.



One doubt though,

"9728 is the largest L2 frame size allowed by the NIC" -- this 9728 size is some constrain due to DPDK as the virtio driver in the kernel can support till mtu size of 68 to 65535, where as in DPDK pmd we are trying with 64 to 9728.



drivers/net/virtio/virtio_ethdev.c | 19 +++++++++++++++++++

1 file changed, 19 insertions(+)



diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c

index 07d6449..da16ad4 100644

--- a/drivers/net/virtio/virtio_ethdev.c

+++ b/drivers/net/virtio/virtio_ethdev.c

@@ -653,12 +653,20 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)

                PMD_INIT_LOG(ERR, "Failed to disable allmulticast");

}



+#define VLAN_TAG_LEN           4    /* 802.3ac tag (not DMA'd) */

+

+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)

+{

+       struct rte_eth_dev_info dev_info;

+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_LEN;

+       uint32_t frame_size = mtu + ether_hdr_len;

+

+       virtio_dev_info_get(dev, &dev_info);

+

+       if (mtu < dev_info.min_rx_bufsize || frame_size > dev_info.max_rx_pktlen) {

+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",

+                               dev_info.min_rx_bufsize,

+                               (dev_info.max_rx_pktlen - ether_hdr_len));

+               return -EINVAL;

+       }

+       return 0;

+}

@@ -677,7 +685,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {

        .allmulticast_enable     = virtio_dev_allmulticast_enable,

        .allmulticast_disable    = virtio_dev_allmulticast_disable,

+       .mtu_set                 = virtio_mtu_set,

        .dev_infos_get           = virtio_dev_info_get,

        .stats_get               = virtio_dev_stats_get,

        .xstats_get              = virtio_dev_xstats_get,





--

Regards,

Souvik



-----Original Message-----
From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
Sent: Friday, September 9, 2016 11:44 AM
To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio



>

>Hi Mark,

>

>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .

>Thanks.

>The MTU here is L3 MTU.  Setting this will help in reducing the

>fragmented/multi-segmented packets and also in case we want to reduce

>the MTU below 1500, to support VXLAN or GRE tunnel for the packets in openstack and cloud environments.

>

>---

> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++

> 1 file changed, 12 insertions(+)

>

>diff --git a/drivers/net/virtio/virtio_ethdev.c

>b/drivers/net/virtio/virtio_ethdev.c

>index 07d6449..da16ad4 100644

>--- a/drivers/net/virtio/virtio_ethdev.c

>+++ b/drivers/net/virtio/virtio_ethdev.c

>

>static int virtio_dev_queue_stats_mapping_set(

>            __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@

>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)

>                           PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }

>

>+static int

>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {

>+          struct virtio_hw *hw = dev->data->dev_private;

>+          if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {



If MTU is the L3 MTU as you've indicated, then you need to take account of L2 overhead before performing the comparison above.

Say the user supplies 'mtu' as 9728 - the corresponding minimum frame size is L2_HDR_LEN + 9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can accommodate (note that 9728 is the largest L2 frame size allowed by the NIC, not the largest IP packet size).



>+                        PMD_INIT_LOG(ERR, "Mtu should be between VIRTIO_MIN_RX_BUFSIZE and

>VIRTIO_MAX_RX_PKTLEN \n");



Two things on this statement:

1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely means very little, and as such is not helpful. I suggest going with the format that I included in my earlier mail, which prints the numeric value of the min and max rx defines

2) <micronit> MTU is an initialization, and should be printed as such in a log (i.e. all caps) </micronit>



Hope this helps,

Mark



>+                        return -EINVAL;

>+          }

>+          return 0;

>+}

>+

> /*

>  * dev_ops for virtio, bare necessities for basic operation

>  */

>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {

>            .promiscuous_disable     = virtio_dev_promiscuous_disable,

>            .allmulticast_enable     = virtio_dev_allmulticast_enable,

>            .allmulticast_disable    = virtio_dev_allmulticast_disable,

>+          .mtu_set                 = virtio_mtu_set,

>

>            .dev_infos_get           = virtio_dev_info_get,

>            .stats_get               = virtio_dev_stats_get,

>--

>

>--

>Regards,

>Souvik

>-----Original Message-----

>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]

>Sent: Friday, September 9, 2016 11:05 AM

>To: Dey, Souvik <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>; Yuanhan Liu

><yuanhan.liu@linux.intel.com<mailto:yuanhan.liu@linux.intel.com>>

>Cc: dev@dpdk.org<mailto:dev@dpdk.org>; stephen@networkplumber.org<mailto:stephen@networkplumber.org>

>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio

>

>>

>>Hi Liu,

>>

>>Yes agreed your comment. I will definitely remove the declaration as

>>it is not really required.

>> So the latest patch will look like this . Yes I did rush a bit to

>>submit the patch last will correct my suite. So sending the patch in a

>>reply if we have more comments we can take a look and they re-submit

>>the final reviewed

>patch. Thanks for the help though.

>>

>>---

>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++

>> 1 file changed, 12 insertions(+)

>>

>>diff --git a/drivers/net/virtio/virtio_ethdev.c

>>b/drivers/net/virtio/virtio_ethdev.c

>>index 07d6449..da16ad4 100644

>>--- a/drivers/net/virtio/virtio_ethdev.c

>>+++ b/drivers/net/virtio/virtio_ethdev.c

>>

>>+static int

>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {

>>+        struct virtio_hw *hw = dev->data->dev_private;

>>+        if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {

>>+                      PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

>

>Hi Souvik,

>

>Why hardcode the values in the PMD_INIT_LOG?

>

>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d and %d",

>                                                                                                   VIRTIO_MIN_RX_BUFSIZE,

>                                                                                  VIRTIO_MAX_RX_PKTLEN);

>

>That way, if the values that the macros evaluate to change, the log

>will update correspondingly.

>

>Also, does 'MTU' in this context relate to the L2 or L3 MTU?

>

>>+                      return -EINVAL;

>>+        }

>>+        return 0;

>>+}

>>+

>> /*

>>  * dev_ops for virtio, bare necessities for basic operation

>>  */

>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {

>>          .promiscuous_disable     = virtio_dev_promiscuous_disable,

>>          .allmulticast_enable     = virtio_dev_allmulticast_enable,

>>          .allmulticast_disable    = virtio_dev_allmulticast_disable,

>>+        .mtu_set                 = virtio_mtu_set,

>>

>>          .dev_infos_get           = virtio_dev_info_get,

>>          .stats_get               = virtio_dev_stats_get,

>>--

>>

>>--

>>Regards,

>>Souvik

>>

>>-----Original Message-----

>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]

>>Sent: Friday, September 9, 2016 3:00 AM

>>To: Dey, Souvik <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>

>>Cc: dev@dpdk.org<mailto:dev@dpdk.org>; stephen@networkplumber.org<mailto:stephen@networkplumber.org>

>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio

>>

>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:

>>> Hi Liu,

>>>        Submitted the version 4 of the patch as you suggested ,

>>

>>Your patch is looking much better. But not really, you ignored few of my comments.

>>

>>> and have removed the Reviewed by line.

>>> I have still kept the function definition as to follow the same suit

>>> as we have done for

>>other eth_dev_ops.

>>

>>That's because most of the method implementions are after the

>>reference, thus the declaration is needed.

>>

>>For your case, I see no good reason to do that. BTW, if you disagree

>>with my comment, you shoud made a reply, instead of rushing to sending a new version.

>>

>>> --

>>> Regards,

>>> Souvik

>>>

>>> -----Original Message-----

>>> From: Dey, Souvik

>>> Sent: Wednesday, September 7, 2016 12:19 AM

>>> To: dev@dpdk.org<mailto:dev@dpdk.org>; stephen@networkplumber.org<mailto:stephen@networkplumber.org>;

>>> yuanhan.liu@linux.intel.com<mailto:yuanhan.liu@linux.intel.com>

>>> Cc: Dey, Souvik <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>

>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio

>>>

>>>

>>> Virtio interfaces should also support setting of mtu, as in case of

>>> cloud it is expected to

>>have the consistent mtu across the infrastructure that the dhcp server

>>sends and not hardcoded to 1500(default).

>>>

>>> Changes in v4: Incorporated review comments.

>>> Changes in v3: Corrected few style errors as reported by sys-stv.

>>> Changes in v2: Incorporated review comments.

>>

>>DPDK prefers to put the change log to ...

>>>

>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>

>>>

>>> ---

>>

>>... here.

>>

>>So that they will be showed in mailing list (for review), but they will be gone after apply.

>>In another word, we don't like to see those change log in git history,

>>but we'd like to see them while review.

>>

>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++

>>>  1 file changed, 12 insertions(+)

>>>

>>> diff --git a/drivers/net/virtio/virtio_ethdev.c

>>> b/drivers/net/virtio/virtio_ethdev.c

>>> index 07d6449..da16ad4 100644

>>> --- a/drivers/net/virtio/virtio_ethdev.c

>>> +++ b/drivers/net/virtio/virtio_ethdev.c

>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev

>>> *dev,  static void

>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);

>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,

>>>                                                   struct ether_addr *mac_addr);

>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);

>>>

>>>  static int virtio_dev_queue_stats_mapping_set(

>>>        __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@

>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)

>>>                      PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }

>>>

>>> +static int

>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {

>>> +     struct virtio_hw *hw = dev->data->dev_private;

>>> +     if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {

>>> +                   PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

>>

>>I still saw those numbers.

>>

>>          --yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09 18:16             ` Dey, Souvik
@ 2016-09-12 14:25               ` Dey, Souvik
  2016-09-12 14:47               ` Kavanagh, Mark B
  1 sibling, 0 replies; 19+ messages in thread
From: Dey, Souvik @ 2016-09-12 14:25 UTC (permalink / raw)
  To: Dey, Souvik, Kavanagh, Mark B, Yuanhan Liu; +Cc: dev, stephen

Hi All,
	Any further comments or updates to be  made in the below patch else I will go ahead a submit the v5 for the same.

--
Regards,
Souvik

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Dey, Souvik
Sent: Friday, September 9, 2016 2:16 PM
To: Kavanagh, Mark B <mark.b.kavanagh@intel.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio

Hi Mark/Liu,

              Thanks to both of you for being so patient with a series of silly errors. I have tried to make it better this time. Also there were some un-used variable in the function which I have removed. Please check the new patch with all your comments incorporated. Also along with the L2_HDR_LEN and L2_CRC_LEN, I have taken in consideration the VLAN_LEN too.



One doubt though,

"9728 is the largest L2 frame size allowed by the NIC" -- this 9728 size is some constrain due to DPDK as the virtio driver in the kernel can support till mtu size of 68 to 65535, where as in DPDK pmd we are trying with 64 to 9728.



drivers/net/virtio/virtio_ethdev.c | 19 +++++++++++++++++++

1 file changed, 19 insertions(+)



diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c

index 07d6449..da16ad4 100644

--- a/drivers/net/virtio/virtio_ethdev.c

+++ b/drivers/net/virtio/virtio_ethdev.c

@@ -653,12 +653,20 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)

                PMD_INIT_LOG(ERR, "Failed to disable allmulticast");

}



+#define VLAN_TAG_LEN           4    /* 802.3ac tag (not DMA'd) */

+

+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)

+{

+       struct rte_eth_dev_info dev_info;

+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_LEN;

+       uint32_t frame_size = mtu + ether_hdr_len;

+

+       virtio_dev_info_get(dev, &dev_info);

+

+       if (mtu < dev_info.min_rx_bufsize || frame_size > dev_info.max_rx_pktlen) {

+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",

+                               dev_info.min_rx_bufsize,

+                               (dev_info.max_rx_pktlen - ether_hdr_len));

+               return -EINVAL;

+       }

+       return 0;

+}

@@ -677,7 +685,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {

        .allmulticast_enable     = virtio_dev_allmulticast_enable,

        .allmulticast_disable    = virtio_dev_allmulticast_disable,

+       .mtu_set                 = virtio_mtu_set,

        .dev_infos_get           = virtio_dev_info_get,

        .stats_get               = virtio_dev_stats_get,

        .xstats_get              = virtio_dev_xstats_get,





--

Regards,

Souvik



-----Original Message-----
From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
Sent: Friday, September 9, 2016 11:44 AM
To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio



>

>Hi Mark,

>

>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .

>Thanks.

>The MTU here is L3 MTU.  Setting this will help in reducing the

>fragmented/multi-segmented packets and also in case we want to reduce

>the MTU below 1500, to support VXLAN or GRE tunnel for the packets in openstack and cloud environments.

>

>---

> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++

> 1 file changed, 12 insertions(+)

>

>diff --git a/drivers/net/virtio/virtio_ethdev.c

>b/drivers/net/virtio/virtio_ethdev.c

>index 07d6449..da16ad4 100644

>--- a/drivers/net/virtio/virtio_ethdev.c

>+++ b/drivers/net/virtio/virtio_ethdev.c

>

>static int virtio_dev_queue_stats_mapping_set(

>            __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@

>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)

>                           PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }

>

>+static int

>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {

>+          struct virtio_hw *hw = dev->data->dev_private;

>+          if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {



If MTU is the L3 MTU as you've indicated, then you need to take account of L2 overhead before performing the comparison above.

Say the user supplies 'mtu' as 9728 - the corresponding minimum frame size is L2_HDR_LEN + 9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can accommodate (note that 9728 is the largest L2 frame size allowed by the NIC, not the largest IP packet size).



>+                        PMD_INIT_LOG(ERR, "Mtu should be between VIRTIO_MIN_RX_BUFSIZE and

>VIRTIO_MAX_RX_PKTLEN \n");



Two things on this statement:

1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely means very little, and as such is not helpful. I suggest going with the format that I included in my earlier mail, which prints the numeric value of the min and max rx defines

2) <micronit> MTU is an initialization, and should be printed as such in a log (i.e. all caps) </micronit>



Hope this helps,

Mark



>+                        return -EINVAL;

>+          }

>+          return 0;

>+}

>+

> /*

>  * dev_ops for virtio, bare necessities for basic operation

>  */

>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {

>            .promiscuous_disable     = virtio_dev_promiscuous_disable,

>            .allmulticast_enable     = virtio_dev_allmulticast_enable,

>            .allmulticast_disable    = virtio_dev_allmulticast_disable,

>+          .mtu_set                 = virtio_mtu_set,

>

>            .dev_infos_get           = virtio_dev_info_get,

>            .stats_get               = virtio_dev_stats_get,

>--

>

>--

>Regards,

>Souvik

>-----Original Message-----

>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]

>Sent: Friday, September 9, 2016 11:05 AM

>To: Dey, Souvik <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>; Yuanhan Liu

><yuanhan.liu@linux.intel.com<mailto:yuanhan.liu@linux.intel.com>>

>Cc: dev@dpdk.org<mailto:dev@dpdk.org>; stephen@networkplumber.org<mailto:stephen@networkplumber.org>

>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio

>

>>

>>Hi Liu,

>>

>>Yes agreed your comment. I will definitely remove the declaration as

>>it is not really required.

>> So the latest patch will look like this . Yes I did rush a bit to

>>submit the patch last will correct my suite. So sending the patch in a

>>reply if we have more comments we can take a look and they re-submit

>>the final reviewed

>patch. Thanks for the help though.

>>

>>---

>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++

>> 1 file changed, 12 insertions(+)

>>

>>diff --git a/drivers/net/virtio/virtio_ethdev.c

>>b/drivers/net/virtio/virtio_ethdev.c

>>index 07d6449..da16ad4 100644

>>--- a/drivers/net/virtio/virtio_ethdev.c

>>+++ b/drivers/net/virtio/virtio_ethdev.c

>>

>>+static int

>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {

>>+        struct virtio_hw *hw = dev->data->dev_private;

>>+        if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {

>>+                      PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

>

>Hi Souvik,

>

>Why hardcode the values in the PMD_INIT_LOG?

>

>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d and %d",

>                                                                                                   VIRTIO_MIN_RX_BUFSIZE,

>                                                                                  VIRTIO_MAX_RX_PKTLEN);

>

>That way, if the values that the macros evaluate to change, the log

>will update correspondingly.

>

>Also, does 'MTU' in this context relate to the L2 or L3 MTU?

>

>>+                      return -EINVAL;

>>+        }

>>+        return 0;

>>+}

>>+

>> /*

>>  * dev_ops for virtio, bare necessities for basic operation

>>  */

>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {

>>          .promiscuous_disable     = virtio_dev_promiscuous_disable,

>>          .allmulticast_enable     = virtio_dev_allmulticast_enable,

>>          .allmulticast_disable    = virtio_dev_allmulticast_disable,

>>+        .mtu_set                 = virtio_mtu_set,

>>

>>          .dev_infos_get           = virtio_dev_info_get,

>>          .stats_get               = virtio_dev_stats_get,

>>--

>>

>>--

>>Regards,

>>Souvik

>>

>>-----Original Message-----

>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]

>>Sent: Friday, September 9, 2016 3:00 AM

>>To: Dey, Souvik <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>

>>Cc: dev@dpdk.org<mailto:dev@dpdk.org>; stephen@networkplumber.org<mailto:stephen@networkplumber.org>

>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio

>>

>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:

>>> Hi Liu,

>>>        Submitted the version 4 of the patch as you suggested ,

>>

>>Your patch is looking much better. But not really, you ignored few of my comments.

>>

>>> and have removed the Reviewed by line.

>>> I have still kept the function definition as to follow the same suit

>>> as we have done for

>>other eth_dev_ops.

>>

>>That's because most of the method implementions are after the

>>reference, thus the declaration is needed.

>>

>>For your case, I see no good reason to do that. BTW, if you disagree

>>with my comment, you shoud made a reply, instead of rushing to sending a new version.

>>

>>> --

>>> Regards,

>>> Souvik

>>>

>>> -----Original Message-----

>>> From: Dey, Souvik

>>> Sent: Wednesday, September 7, 2016 12:19 AM

>>> To: dev@dpdk.org<mailto:dev@dpdk.org>; stephen@networkplumber.org<mailto:stephen@networkplumber.org>;

>>> yuanhan.liu@linux.intel.com<mailto:yuanhan.liu@linux.intel.com>

>>> Cc: Dey, Souvik <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>

>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio

>>>

>>>

>>> Virtio interfaces should also support setting of mtu, as in case of

>>> cloud it is expected to

>>have the consistent mtu across the infrastructure that the dhcp server

>>sends and not hardcoded to 1500(default).

>>>

>>> Changes in v4: Incorporated review comments.

>>> Changes in v3: Corrected few style errors as reported by sys-stv.

>>> Changes in v2: Incorporated review comments.

>>

>>DPDK prefers to put the change log to ...

>>>

>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com<mailto:sodey@sonusnet.com>>

>>>

>>> ---

>>

>>... here.

>>

>>So that they will be showed in mailing list (for review), but they will be gone after apply.

>>In another word, we don't like to see those change log in git history,

>>but we'd like to see them while review.

>>

>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++

>>>  1 file changed, 12 insertions(+)

>>>

>>> diff --git a/drivers/net/virtio/virtio_ethdev.c

>>> b/drivers/net/virtio/virtio_ethdev.c

>>> index 07d6449..da16ad4 100644

>>> --- a/drivers/net/virtio/virtio_ethdev.c

>>> +++ b/drivers/net/virtio/virtio_ethdev.c

>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev

>>> *dev,  static void

>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);

>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,

>>>                                                   struct ether_addr *mac_addr);

>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);

>>>

>>>  static int virtio_dev_queue_stats_mapping_set(

>>>        __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@

>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)

>>>                      PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }

>>>

>>> +static int

>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {

>>> +     struct virtio_hw *hw = dev->data->dev_private;

>>> +     if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {

>>> +                   PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");

>>

>>I still saw those numbers.

>>

>>          --yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-09 18:16             ` Dey, Souvik
  2016-09-12 14:25               ` Dey, Souvik
@ 2016-09-12 14:47               ` Kavanagh, Mark B
  2016-09-12 15:11                 ` Dey, Souvik
  1 sibling, 1 reply; 19+ messages in thread
From: Kavanagh, Mark B @ 2016-09-12 14:47 UTC (permalink / raw)
  To: Dey, Souvik, Yuanhan Liu; +Cc: dev, stephen

>
>Hi Mark/Liu,
>              Thanks to both of you for being so patient with a series of silly errors. I
>have tried to make it better this time. Also there were some un-used variable in the function
>which I have removed. Please check the new patch with all your comments incorporated. Also
>along with the L2_HDR_LEN and L2_CRC_LEN, I have taken in consideration the VLAN_LEN too.
>
>One doubt though,
>"9728 is the largest L2 frame size allowed by the NIC" -- this 9728 size is some constrain
>due to DPDK as the virtio driver in the kernel can support till mtu size of 68 to 65535,
>where as in DPDK pmd we are trying with 64 to 9728.

Yes, I meant the NIC as controlled by a DPDK PMD (I thought this was implicit, given the context of this discussion). I'll be more explicit in future mails though.

>
>drivers/net/virtio/virtio_ethdev.c | 19 +++++++++++++++++++
>1 file changed, 19 insertions(+)
>
>diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
>index 07d6449..da16ad4 100644
>--- a/drivers/net/virtio/virtio_ethdev.c
>+++ b/drivers/net/virtio/virtio_ethdev.c
>@@ -653,12 +653,20 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>                PMD_INIT_LOG(ERR, "Failed to disable allmulticast");
>}
>
>+#define VLAN_TAG_LEN           4    /* 802.3ac tag (not DMA'd) */
>+
>+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)

One thing on this function: it doesn't actually set any fields, but rather just sanitizes 'mtu'.
Maybe this is acceptable, since the calling function (i.e. rte_eth_dev_set_mtu) sets rte_eth_dev->data->mtu?

>+{
>+       struct rte_eth_dev_info dev_info;
>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_LEN;
>+       uint32_t frame_size = mtu + ether_hdr_len;
>+
>+       virtio_dev_info_get(dev, &dev_info);
>+
>+       if (mtu < dev_info.min_rx_bufsize || frame_size > dev_info.max_rx_pktlen) {

It's not clear to me whether 'mtu' in this case should be compared with ETHER_MIN_MTU, as per other DPDK drivers, or alternatively whether 'frame_size' should be compared with dev_info.min_rx_bufsize.
Any thoughts?

>+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",
>+                               dev_info.min_rx_bufsize,
As above.

>+                               (dev_info.max_rx_pktlen - ether_hdr_len));
>+               return -EINVAL;
>+       }
>+       return 0;
>+}
>@@ -677,7 +685,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
>        .allmulticast_enable     = virtio_dev_allmulticast_enable,
>        .allmulticast_disable    = virtio_dev_allmulticast_disable,
>+       .mtu_set                 = virtio_mtu_set,
>        .dev_infos_get           = virtio_dev_info_get,
>        .stats_get               = virtio_dev_stats_get,
>        .xstats_get              = virtio_dev_xstats_get,
>
>
>--
>Regards,
>Souvik
>
>-----Original Message-----
>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>Sent: Friday, September 9, 2016 11:44 AM
>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
>Cc: dev@dpdk.org; stephen@networkplumber.org
>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>
>>
>>Hi Mark,
>>
>>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .
>>Thanks.
>>The MTU here is L3 MTU.  Setting this will help in reducing the
>>fragmented/multi-segmented packets and also in case we want to reduce
>>the MTU below 1500, to support VXLAN or GRE tunnel for the packets in openstack and cloud
>environments.
>>
>>---
>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>b/drivers/net/virtio/virtio_ethdev.c
>>index 07d6449..da16ad4 100644
>>--- a/drivers/net/virtio/virtio_ethdev.c
>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>
>>static int virtio_dev_queue_stats_mapping_set(
>>            __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@
>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>                           PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
>>
>>+static int
>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>+          struct virtio_hw *hw = dev->data->dev_private;
>>+          if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>
>If MTU is the L3 MTU as you've indicated, then you need to take account of L2 overhead before
>performing the comparison above.
>Say the user supplies 'mtu' as 9728 - the corresponding minimum frame size is L2_HDR_LEN +
>9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can accommodate (note that 9728
>is the largest L2 frame size allowed by the NIC, not the largest IP packet size).
>
>>+                        PMD_INIT_LOG(ERR, "Mtu should be between VIRTIO_MIN_RX_BUFSIZE and
>>VIRTIO_MAX_RX_PKTLEN \n");
>
>Two things on this statement:
>1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely means very little, and
>as such is not helpful. I suggest going with the format that I included in my earlier mail,
>which prints the numeric value of the min and max rx defines
>2) <micronit> MTU is an initialization, and should be printed as such in a log (i.e. all
>caps) </micronit>
>
>Hope this helps,
>Mark
>
>>+                        return -EINVAL;
>>+          }
>>+          return 0;
>>+}
>>+
>> /*
>>  * dev_ops for virtio, bare necessities for basic operation
>>  */
>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
>>            .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>            .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>            .allmulticast_disable    = virtio_dev_allmulticast_disable,
>>+          .mtu_set                 = virtio_mtu_set,
>>
>>            .dev_infos_get           = virtio_dev_info_get,
>>            .stats_get               = virtio_dev_stats_get,
>>--
>>
>>--
>>Regards,
>>Souvik
>>-----Original Message-----
>>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>>Sent: Friday, September 9, 2016 11:05 AM
>>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu
>><yuanhan.liu@linux.intel.com>
>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>>
>>>Hi Liu,
>>>
>>>Yes agreed your comment. I will definitely remove the declaration as
>>>it is not really required.
>>> So the latest patch will look like this . Yes I did rush a bit to
>>>submit the patch last will correct my suite. So sending the patch in a
>>>reply if we have more comments we can take a look and they re-submit
>>>the final reviewed
>>patch. Thanks for the help though.
>>>
>>>---
>>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>> 1 file changed, 12 insertions(+)
>>>
>>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>b/drivers/net/virtio/virtio_ethdev.c
>>>index 07d6449..da16ad4 100644
>>>--- a/drivers/net/virtio/virtio_ethdev.c
>>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>>
>>>+static int
>>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>+        struct virtio_hw *hw = dev->data->dev_private;
>>>+        if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>>>+                      PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
>>
>>Hi Souvik,
>>
>>Why hardcode the values in the PMD_INIT_LOG?
>>
>>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d and %d",
>>
>       VIRTIO_MIN_RX_BUFSIZE,
>>                                                                                  VIRTIO_MAX
>_RX_PKTLEN);
>>
>>That way, if the values that the macros evaluate to change, the log
>>will update correspondingly.
>>
>>Also, does 'MTU' in this context relate to the L2 or L3 MTU?
>>
>>>+                      return -EINVAL;
>>>+        }
>>>+        return 0;
>>>+}
>>>+
>>> /*
>>>  * dev_ops for virtio, bare necessities for basic operation
>>>  */
>>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
>>>          .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>>          .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>>          .allmulticast_disable    = virtio_dev_allmulticast_disable,
>>>+        .mtu_set                 = virtio_mtu_set,
>>>
>>>          .dev_infos_get           = virtio_dev_info_get,
>>>          .stats_get               = virtio_dev_stats_get,
>>>--
>>>
>>>--
>>>Regards,
>>>Souvik
>>>
>>>-----Original Message-----
>>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>>>Sent: Friday, September 9, 2016 3:00 AM
>>>To: Dey, Souvik <sodey@sonusnet.com>
>>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>>>
>>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>>>> Hi Liu,
>>>>        Submitted the version 4 of the patch as you suggested ,
>>>
>>>Your patch is looking much better. But not really, you ignored few of my comments.
>>>
>>>> and have removed the Reviewed by line.
>>>> I have still kept the function definition as to follow the same suit
>>>> as we have done for
>>>other eth_dev_ops.
>>>
>>>That's because most of the method implementions are after the
>>>reference, thus the declaration is needed.
>>>
>>>For your case, I see no good reason to do that. BTW, if you disagree
>>>with my comment, you shoud made a reply, instead of rushing to sending a new version.
>>>
>>>> --
>>>> Regards,
>>>> Souvik
>>>>
>>>> -----Original Message-----
>>>> From: Dey, Souvik
>>>> Sent: Wednesday, September 7, 2016 12:19 AM
>>>> To: dev@dpdk.org; stephen@networkplumber.org;
>>>> yuanhan.liu@linux.intel.com
>>>> Cc: Dey, Souvik <sodey@sonusnet.com>
>>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>>>
>>>>
>>>> Virtio interfaces should also support setting of mtu, as in case of
>>>> cloud it is expected to
>>>have the consistent mtu across the infrastructure that the dhcp server
>>>sends and not hardcoded to 1500(default).
>>>>
>>>> Changes in v4: Incorporated review comments.
>>>> Changes in v3: Corrected few style errors as reported by sys-stv.
>>>> Changes in v2: Incorporated review comments.
>>>
>>>DPDK prefers to put the change log to ...
>>>>
>>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>>>
>>>> ---
>>>
>>>... here.
>>>
>>>So that they will be showed in mailing list (for review), but they will be gone after
>apply.
>>>In another word, we don't like to see those change log in git history,
>>>but we'd like to see them while review.
>>>
>>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>>  1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>> b/drivers/net/virtio/virtio_ethdev.c
>>>> index 07d6449..da16ad4 100644
>>>> --- a/drivers/net/virtio/virtio_ethdev.c
>>>> +++ b/drivers/net/virtio/virtio_ethdev.c
>>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct rte_eth_dev
>>>> *dev,  static void
>>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
>>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>>>>                                                   struct ether_addr *mac_addr);
>>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>>>>
>>>>  static int virtio_dev_queue_stats_mapping_set(
>>>>        __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 @@
>>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>>                      PMD_INIT_LOG(ERR, "Failed to disable allmulticast");  }
>>>>
>>>> +static int
>>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>> +     struct virtio_hw *hw = dev->data->dev_private;
>>>> +     if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > VIRTIO_MAX_RX_PKTLEN) {
>>>> +                   PMD_INIT_LOG(ERR, "Mtu should be between 64 and 9728\n");
>>>
>>>I still saw those numbers.
>>>
>>>          --yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-12 14:47               ` Kavanagh, Mark B
@ 2016-09-12 15:11                 ` Dey, Souvik
  2016-09-14  0:25                   ` Dey, Souvik
  2016-09-14 12:15                   ` Kavanagh, Mark B
  0 siblings, 2 replies; 19+ messages in thread
From: Dey, Souvik @ 2016-09-12 15:11 UTC (permalink / raw)
  To: Kavanagh, Mark B, Yuanhan Liu; +Cc: dev, stephen

	

-----Original Message-----
From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com] 
Sent: Monday, September 12, 2016 10:48 AM
To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio

>
>Hi Mark/Liu,
>              Thanks to both of you for being so patient with a series 
>of silly errors. I have tried to make it better this time. Also there 
>were some un-used variable in the function which I have removed. Please 
>check the new patch with all your comments incorporated. Also along with the L2_HDR_LEN and L2_CRC_LEN, I have taken in consideration the VLAN_LEN too.
>
>One doubt though,
>"9728 is the largest L2 frame size allowed by the NIC" -- this 9728 
>size is some constrain due to DPDK as the virtio driver in the kernel 
>can support till mtu size of 68 to 65535, where as in DPDK pmd we are trying with 64 to 9728.

Yes, I meant the NIC as controlled by a DPDK PMD (I thought this was implicit, given the context of this discussion). I'll be more explicit in future mails though.

>
>drivers/net/virtio/virtio_ethdev.c | 19 +++++++++++++++++++
>1 file changed, 19 insertions(+)
>
>diff --git a/drivers/net/virtio/virtio_ethdev.c 
>b/drivers/net/virtio/virtio_ethdev.c
>index 07d6449..da16ad4 100644
>--- a/drivers/net/virtio/virtio_ethdev.c
>+++ b/drivers/net/virtio/virtio_ethdev.c
>@@ -653,12 +653,20 @@ virtio_dev_allmulticast_disable(struct 
>rte_eth_dev *dev)
>                PMD_INIT_LOG(ERR, "Failed to disable allmulticast"); }
>
>+#define VLAN_TAG_LEN           4    /* 802.3ac tag (not DMA'd) */
>+
>+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)

One thing on this function: it doesn't actually set any fields, but rather just sanitizes 'mtu'.
Maybe this is acceptable, since the calling function (i.e. rte_eth_dev_set_mtu) sets rte_eth_dev->data->mtu?
[Dey, Souvik]  Yes , only the sanity check for the mtu is required here and the setting of the call back, else the rte_eth_dev_set_mtu() just returns without setting the MTU in the rte_eth_dev->data->mtu.

>+{
>+       struct rte_eth_dev_info dev_info;
>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + 
>+VLAN_TAG_LEN;
>+       uint32_t frame_size = mtu + ether_hdr_len;
>+
>+       virtio_dev_info_get(dev, &dev_info);
>+
>+       if (mtu < dev_info.min_rx_bufsize || frame_size > 
>+dev_info.max_rx_pktlen) {

It's not clear to me whether 'mtu' in this case should be compared with ETHER_MIN_MTU, as per other DPDK drivers, or alternatively whether 'frame_size' should be compared with dev_info.min_rx_bufsize.
Any thoughts?
[Dey, Souvik] I am not sure why virtio min_rx_bufsize is less than ETHER_MIN_MTU, i think it will be good to have the  compare statement as 
If(frame_size < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen) , then error. What do you suggest ?

>+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",
>+                               dev_info.min_rx_bufsize,
As above.

>+                               (dev_info.max_rx_pktlen - 
>+ether_hdr_len));
>+               return -EINVAL;
>+       }
>+       return 0;
>+}
>@@ -677,7 +685,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops 
>= {
>        .allmulticast_enable     = virtio_dev_allmulticast_enable,
>        .allmulticast_disable    = virtio_dev_allmulticast_disable,
>+       .mtu_set                 = virtio_mtu_set,
>        .dev_infos_get           = virtio_dev_info_get,
>        .stats_get               = virtio_dev_stats_get,
>        .xstats_get              = virtio_dev_xstats_get,
>
>
>--
>Regards,
>Souvik
>
>-----Original Message-----
>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>Sent: Friday, September 9, 2016 11:44 AM
>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu 
><yuanhan.liu@linux.intel.com>
>Cc: dev@dpdk.org; stephen@networkplumber.org
>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>
>>
>>Hi Mark,
>>
>>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .
>>Thanks.
>>The MTU here is L3 MTU.  Setting this will help in reducing the 
>>fragmented/multi-segmented packets and also in case we want to reduce 
>>the MTU below 1500, to support VXLAN or GRE tunnel for the packets in 
>>openstack and cloud
>environments.
>>
>>---
>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>b/drivers/net/virtio/virtio_ethdev.c
>>index 07d6449..da16ad4 100644
>>--- a/drivers/net/virtio/virtio_ethdev.c
>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>
>>static int virtio_dev_queue_stats_mapping_set(
>>            __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 
>>+653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>                           PMD_INIT_LOG(ERR, "Failed to disable 
>>allmulticast");  }
>>
>>+static int
>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>+          struct virtio_hw *hw = dev->data->dev_private;
>>+          if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > 
>>+VIRTIO_MAX_RX_PKTLEN) {
>
>If MTU is the L3 MTU as you've indicated, then you need to take account 
>of L2 overhead before performing the comparison above.
>Say the user supplies 'mtu' as 9728 - the corresponding minimum frame 
>size is L2_HDR_LEN +
>9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can 
>accommodate (note that 9728 is the largest L2 frame size allowed by the NIC, not the largest IP packet size).
>
>>+                        PMD_INIT_LOG(ERR, "Mtu should be between 
>>+VIRTIO_MIN_RX_BUFSIZE and
>>VIRTIO_MAX_RX_PKTLEN \n");
>
>Two things on this statement:
>1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely 
>means very little, and as such is not helpful. I suggest going with the 
>format that I included in my earlier mail, which prints the numeric 
>value of the min and max rx defines
>2) <micronit> MTU is an initialization, and should be printed as such 
>in a log (i.e. all
>caps) </micronit>
>
>Hope this helps,
>Mark
>
>>+                        return -EINVAL;
>>+          }
>>+          return 0;
>>+}
>>+
>> /*
>>  * dev_ops for virtio, bare necessities for basic operation
>>  */
>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops 
>>= {
>>            .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>            .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>            .allmulticast_disable    = 
>>virtio_dev_allmulticast_disable,
>>+          .mtu_set                 = virtio_mtu_set,
>>
>>            .dev_infos_get           = virtio_dev_info_get,
>>            .stats_get               = virtio_dev_stats_get,
>>--
>>
>>--
>>Regards,
>>Souvik
>>-----Original Message-----
>>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>>Sent: Friday, September 9, 2016 11:05 AM
>>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu 
>><yuanhan.liu@linux.intel.com>
>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>>
>>>Hi Liu,
>>>
>>>Yes agreed your comment. I will definitely remove the declaration as 
>>>it is not really required.
>>> So the latest patch will look like this . Yes I did rush a bit to 
>>>submit the patch last will correct my suite. So sending the patch in 
>>>a reply if we have more comments we can take a look and they 
>>>re-submit the final reviewed
>>patch. Thanks for the help though.
>>>
>>>---
>>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>> 1 file changed, 12 insertions(+)
>>>
>>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>b/drivers/net/virtio/virtio_ethdev.c
>>>index 07d6449..da16ad4 100644
>>>--- a/drivers/net/virtio/virtio_ethdev.c
>>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>>
>>>+static int
>>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>+        struct virtio_hw *hw = dev->data->dev_private;
>>>+        if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > 
>>>+VIRTIO_MAX_RX_PKTLEN) {
>>>+                      PMD_INIT_LOG(ERR, "Mtu should be between 64 
>>>+and 9728\n");
>>
>>Hi Souvik,
>>
>>Why hardcode the values in the PMD_INIT_LOG?
>>
>>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d 
>>and %d",
>>
>       VIRTIO_MIN_RX_BUFSIZE,
>>                                                                                  
>>VIRTIO_MAX
>_RX_PKTLEN);
>>
>>That way, if the values that the macros evaluate to change, the log 
>>will update correspondingly.
>>
>>Also, does 'MTU' in this context relate to the L2 or L3 MTU?
>>
>>>+                      return -EINVAL;
>>>+        }
>>>+        return 0;
>>>+}
>>>+
>>> /*
>>>  * dev_ops for virtio, bare necessities for basic operation
>>>  */
>>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops 
>>>virtio_eth_dev_ops = {
>>>          .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>>          .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>>          .allmulticast_disable    = virtio_dev_allmulticast_disable,
>>>+        .mtu_set                 = virtio_mtu_set,
>>>
>>>          .dev_infos_get           = virtio_dev_info_get,
>>>          .stats_get               = virtio_dev_stats_get,
>>>--
>>>
>>>--
>>>Regards,
>>>Souvik
>>>
>>>-----Original Message-----
>>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>>>Sent: Friday, September 9, 2016 3:00 AM
>>>To: Dey, Souvik <sodey@sonusnet.com>
>>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>>>
>>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>>>> Hi Liu,
>>>>        Submitted the version 4 of the patch as you suggested ,
>>>
>>>Your patch is looking much better. But not really, you ignored few of my comments.
>>>
>>>> and have removed the Reviewed by line.
>>>> I have still kept the function definition as to follow the same 
>>>> suit as we have done for
>>>other eth_dev_ops.
>>>
>>>That's because most of the method implementions are after the 
>>>reference, thus the declaration is needed.
>>>
>>>For your case, I see no good reason to do that. BTW, if you disagree 
>>>with my comment, you shoud made a reply, instead of rushing to sending a new version.
>>>
>>>> --
>>>> Regards,
>>>> Souvik
>>>>
>>>> -----Original Message-----
>>>> From: Dey, Souvik
>>>> Sent: Wednesday, September 7, 2016 12:19 AM
>>>> To: dev@dpdk.org; stephen@networkplumber.org; 
>>>> yuanhan.liu@linux.intel.com
>>>> Cc: Dey, Souvik <sodey@sonusnet.com>
>>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>>>
>>>>
>>>> Virtio interfaces should also support setting of mtu, as in case of 
>>>> cloud it is expected to
>>>have the consistent mtu across the infrastructure that the dhcp 
>>>server sends and not hardcoded to 1500(default).
>>>>
>>>> Changes in v4: Incorporated review comments.
>>>> Changes in v3: Corrected few style errors as reported by sys-stv.
>>>> Changes in v2: Incorporated review comments.
>>>
>>>DPDK prefers to put the change log to ...
>>>>
>>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>>>
>>>> ---
>>>
>>>... here.
>>>
>>>So that they will be showed in mailing list (for review), but they 
>>>will be gone after
>apply.
>>>In another word, we don't like to see those change log in git 
>>>history, but we'd like to see them while review.
>>>
>>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>>  1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>> b/drivers/net/virtio/virtio_ethdev.c
>>>> index 07d6449..da16ad4 100644
>>>> --- a/drivers/net/virtio/virtio_ethdev.c
>>>> +++ b/drivers/net/virtio/virtio_ethdev.c
>>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct 
>>>> rte_eth_dev *dev,  static void
>>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index); 
>>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>>>>                                                   struct ether_addr 
>>>>*mac_addr);
>>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>>>>
>>>>  static int virtio_dev_queue_stats_mapping_set(
>>>>        __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 
>>>>@@
>>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>>                      PMD_INIT_LOG(ERR, "Failed to disable 
>>>>allmulticast");  }
>>>>
>>>> +static int
>>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>> +     struct virtio_hw *hw = dev->data->dev_private;
>>>> +     if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu > 
>>>> +VIRTIO_MAX_RX_PKTLEN) {
>>>> +                   PMD_INIT_LOG(ERR, "Mtu should be between 64 and 
>>>> +9728\n");
>>>
>>>I still saw those numbers.
>>>
>>>          --yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-12 15:11                 ` Dey, Souvik
@ 2016-09-14  0:25                   ` Dey, Souvik
  2016-09-14  4:32                     ` Yuanhan Liu
  2016-09-14 12:15                   ` Kavanagh, Mark B
  1 sibling, 1 reply; 19+ messages in thread
From: Dey, Souvik @ 2016-09-14  0:25 UTC (permalink / raw)
  To: Dey, Souvik, Kavanagh, Mark B, Yuanhan Liu; +Cc: dev, stephen

Hi Mark/Liu,
	Is there any further comments to the below patch ? Should I submit it as v5 of the patch ? 

--
Regards,
Souvik

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Dey, Souvik
Sent: Monday, September 12, 2016 11:12 AM
To: Kavanagh, Mark B <mark.b.kavanagh@intel.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio

	

-----Original Message-----
From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
Sent: Monday, September 12, 2016 10:48 AM
To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio

>
>Hi Mark/Liu,
>              Thanks to both of you for being so patient with a series 
>of silly errors. I have tried to make it better this time. Also there 
>were some un-used variable in the function which I have removed. Please 
>check the new patch with all your comments incorporated. Also along with the L2_HDR_LEN and L2_CRC_LEN, I have taken in consideration the VLAN_LEN too.
>
>One doubt though,
>"9728 is the largest L2 frame size allowed by the NIC" -- this 9728 
>size is some constrain due to DPDK as the virtio driver in the kernel 
>can support till mtu size of 68 to 65535, where as in DPDK pmd we are trying with 64 to 9728.

Yes, I meant the NIC as controlled by a DPDK PMD (I thought this was implicit, given the context of this discussion). I'll be more explicit in future mails though.

>
>drivers/net/virtio/virtio_ethdev.c | 19 +++++++++++++++++++
>1 file changed, 19 insertions(+)
>
>diff --git a/drivers/net/virtio/virtio_ethdev.c
>b/drivers/net/virtio/virtio_ethdev.c
>index 07d6449..da16ad4 100644
>--- a/drivers/net/virtio/virtio_ethdev.c
>+++ b/drivers/net/virtio/virtio_ethdev.c
>@@ -653,12 +653,20 @@ virtio_dev_allmulticast_disable(struct
>rte_eth_dev *dev)
>                PMD_INIT_LOG(ERR, "Failed to disable allmulticast"); }
>
>+#define VLAN_TAG_LEN           4    /* 802.3ac tag (not DMA'd) */
>+
>+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)

One thing on this function: it doesn't actually set any fields, but rather just sanitizes 'mtu'.
Maybe this is acceptable, since the calling function (i.e. rte_eth_dev_set_mtu) sets rte_eth_dev->data->mtu?
[Dey, Souvik]  Yes , only the sanity check for the mtu is required here and the setting of the call back, else the rte_eth_dev_set_mtu() just returns without setting the MTU in the rte_eth_dev->data->mtu.

>+{
>+       struct rte_eth_dev_info dev_info;
>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + 
>+VLAN_TAG_LEN;
>+       uint32_t frame_size = mtu + ether_hdr_len;
>+
>+       virtio_dev_info_get(dev, &dev_info);
>+
>+       if (mtu < dev_info.min_rx_bufsize || frame_size >
>+dev_info.max_rx_pktlen) {

It's not clear to me whether 'mtu' in this case should be compared with ETHER_MIN_MTU, as per other DPDK drivers, or alternatively whether 'frame_size' should be compared with dev_info.min_rx_bufsize.
Any thoughts?
[Dey, Souvik] I am not sure why virtio min_rx_bufsize is less than ETHER_MIN_MTU, i think it will be good to have the  compare statement as If(frame_size < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen) , then error. What do you suggest ?

>+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",
>+                               dev_info.min_rx_bufsize,
As above.

>+                               (dev_info.max_rx_pktlen - 
>+ether_hdr_len));
>+               return -EINVAL;
>+       }
>+       return 0;
>+}
>@@ -677,7 +685,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops 
>= {
>        .allmulticast_enable     = virtio_dev_allmulticast_enable,
>        .allmulticast_disable    = virtio_dev_allmulticast_disable,
>+       .mtu_set                 = virtio_mtu_set,
>        .dev_infos_get           = virtio_dev_info_get,
>        .stats_get               = virtio_dev_stats_get,
>        .xstats_get              = virtio_dev_xstats_get,
>
>
>--
>Regards,
>Souvik
>
>-----Original Message-----
>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>Sent: Friday, September 9, 2016 11:44 AM
>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu 
><yuanhan.liu@linux.intel.com>
>Cc: dev@dpdk.org; stephen@networkplumber.org
>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>
>>
>>Hi Mark,
>>
>>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .
>>Thanks.
>>The MTU here is L3 MTU.  Setting this will help in reducing the 
>>fragmented/multi-segmented packets and also in case we want to reduce 
>>the MTU below 1500, to support VXLAN or GRE tunnel for the packets in 
>>openstack and cloud
>environments.
>>
>>---
>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>b/drivers/net/virtio/virtio_ethdev.c
>>index 07d6449..da16ad4 100644
>>--- a/drivers/net/virtio/virtio_ethdev.c
>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>
>>static int virtio_dev_queue_stats_mapping_set(
>>            __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6
>>+653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>                           PMD_INIT_LOG(ERR, "Failed to disable 
>>allmulticast");  }
>>
>>+static int
>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>+          struct virtio_hw *hw = dev->data->dev_private;
>>+          if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>+VIRTIO_MAX_RX_PKTLEN) {
>
>If MTU is the L3 MTU as you've indicated, then you need to take account 
>of L2 overhead before performing the comparison above.
>Say the user supplies 'mtu' as 9728 - the corresponding minimum frame 
>size is L2_HDR_LEN +
>9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can 
>accommodate (note that 9728 is the largest L2 frame size allowed by the NIC, not the largest IP packet size).
>
>>+                        PMD_INIT_LOG(ERR, "Mtu should be between 
>>+VIRTIO_MIN_RX_BUFSIZE and
>>VIRTIO_MAX_RX_PKTLEN \n");
>
>Two things on this statement:
>1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely 
>means very little, and as such is not helpful. I suggest going with the 
>format that I included in my earlier mail, which prints the numeric 
>value of the min and max rx defines
>2) <micronit> MTU is an initialization, and should be printed as such 
>in a log (i.e. all
>caps) </micronit>
>
>Hope this helps,
>Mark
>
>>+                        return -EINVAL;
>>+          }
>>+          return 0;
>>+}
>>+
>> /*
>>  * dev_ops for virtio, bare necessities for basic operation
>>  */
>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops 
>>= {
>>            .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>            .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>            .allmulticast_disable    = 
>>virtio_dev_allmulticast_disable,
>>+          .mtu_set                 = virtio_mtu_set,
>>
>>            .dev_infos_get           = virtio_dev_info_get,
>>            .stats_get               = virtio_dev_stats_get,
>>--
>>
>>--
>>Regards,
>>Souvik
>>-----Original Message-----
>>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>>Sent: Friday, September 9, 2016 11:05 AM
>>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu 
>><yuanhan.liu@linux.intel.com>
>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>>
>>>Hi Liu,
>>>
>>>Yes agreed your comment. I will definitely remove the declaration as 
>>>it is not really required.
>>> So the latest patch will look like this . Yes I did rush a bit to 
>>>submit the patch last will correct my suite. So sending the patch in 
>>>a reply if we have more comments we can take a look and they 
>>>re-submit the final reviewed
>>patch. Thanks for the help though.
>>>
>>>---
>>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>> 1 file changed, 12 insertions(+)
>>>
>>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>b/drivers/net/virtio/virtio_ethdev.c
>>>index 07d6449..da16ad4 100644
>>>--- a/drivers/net/virtio/virtio_ethdev.c
>>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>>
>>>+static int
>>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>+        struct virtio_hw *hw = dev->data->dev_private;
>>>+        if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>+VIRTIO_MAX_RX_PKTLEN) {
>>>+                      PMD_INIT_LOG(ERR, "Mtu should be between 64 
>>>+and 9728\n");
>>
>>Hi Souvik,
>>
>>Why hardcode the values in the PMD_INIT_LOG?
>>
>>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d 
>>and %d",
>>
>       VIRTIO_MIN_RX_BUFSIZE,
>>                                                                                  
>>VIRTIO_MAX
>_RX_PKTLEN);
>>
>>That way, if the values that the macros evaluate to change, the log 
>>will update correspondingly.
>>
>>Also, does 'MTU' in this context relate to the L2 or L3 MTU?
>>
>>>+                      return -EINVAL;
>>>+        }
>>>+        return 0;
>>>+}
>>>+
>>> /*
>>>  * dev_ops for virtio, bare necessities for basic operation
>>>  */
>>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops 
>>>virtio_eth_dev_ops = {
>>>          .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>>          .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>>          .allmulticast_disable    = virtio_dev_allmulticast_disable,
>>>+        .mtu_set                 = virtio_mtu_set,
>>>
>>>          .dev_infos_get           = virtio_dev_info_get,
>>>          .stats_get               = virtio_dev_stats_get,
>>>--
>>>
>>>--
>>>Regards,
>>>Souvik
>>>
>>>-----Original Message-----
>>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>>>Sent: Friday, September 9, 2016 3:00 AM
>>>To: Dey, Souvik <sodey@sonusnet.com>
>>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>>>
>>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>>>> Hi Liu,
>>>>        Submitted the version 4 of the patch as you suggested ,
>>>
>>>Your patch is looking much better. But not really, you ignored few of my comments.
>>>
>>>> and have removed the Reviewed by line.
>>>> I have still kept the function definition as to follow the same 
>>>> suit as we have done for
>>>other eth_dev_ops.
>>>
>>>That's because most of the method implementions are after the 
>>>reference, thus the declaration is needed.
>>>
>>>For your case, I see no good reason to do that. BTW, if you disagree 
>>>with my comment, you shoud made a reply, instead of rushing to sending a new version.
>>>
>>>> --
>>>> Regards,
>>>> Souvik
>>>>
>>>> -----Original Message-----
>>>> From: Dey, Souvik
>>>> Sent: Wednesday, September 7, 2016 12:19 AM
>>>> To: dev@dpdk.org; stephen@networkplumber.org; 
>>>> yuanhan.liu@linux.intel.com
>>>> Cc: Dey, Souvik <sodey@sonusnet.com>
>>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>>>
>>>>
>>>> Virtio interfaces should also support setting of mtu, as in case of 
>>>> cloud it is expected to
>>>have the consistent mtu across the infrastructure that the dhcp 
>>>server sends and not hardcoded to 1500(default).
>>>>
>>>> Changes in v4: Incorporated review comments.
>>>> Changes in v3: Corrected few style errors as reported by sys-stv.
>>>> Changes in v2: Incorporated review comments.
>>>
>>>DPDK prefers to put the change log to ...
>>>>
>>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>>>
>>>> ---
>>>
>>>... here.
>>>
>>>So that they will be showed in mailing list (for review), but they 
>>>will be gone after
>apply.
>>>In another word, we don't like to see those change log in git 
>>>history, but we'd like to see them while review.
>>>
>>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>>  1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>> b/drivers/net/virtio/virtio_ethdev.c
>>>> index 07d6449..da16ad4 100644
>>>> --- a/drivers/net/virtio/virtio_ethdev.c
>>>> +++ b/drivers/net/virtio/virtio_ethdev.c
>>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct 
>>>> rte_eth_dev *dev,  static void
>>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index); 
>>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>>>>                                                   struct ether_addr 
>>>>*mac_addr);
>>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>>>>
>>>>  static int virtio_dev_queue_stats_mapping_set(
>>>>        __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 
>>>>@@
>>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>>                      PMD_INIT_LOG(ERR, "Failed to disable 
>>>>allmulticast");  }
>>>>
>>>> +static int
>>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>> +     struct virtio_hw *hw = dev->data->dev_private;
>>>> +     if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>> +VIRTIO_MAX_RX_PKTLEN) {
>>>> +                   PMD_INIT_LOG(ERR, "Mtu should be between 64 and 
>>>> +9728\n");
>>>
>>>I still saw those numbers.
>>>
>>>          --yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-14  0:25                   ` Dey, Souvik
@ 2016-09-14  4:32                     ` Yuanhan Liu
  0 siblings, 0 replies; 19+ messages in thread
From: Yuanhan Liu @ 2016-09-14  4:32 UTC (permalink / raw)
  To: Dey, Souvik; +Cc: Kavanagh, Mark B, dev, stephen

On Wed, Sep 14, 2016 at 12:25:21AM +0000, Dey, Souvik wrote:
> Hi Mark/Liu,
> 	Is there any further comments to the below patch ? Should I submit it as v5 of the patch ? 

I think I'm okay with the patch now. But I got one more ask for you :)

In commit log, you stated:

    Virtio interfaces should also support setting of mtu, as in case of cloud
    it is expected to have the consistent mtu across the infrastructure that
    the dhcp server sends and not hardcoded to 1500(default).

What would go wrong if the expectation is not achieved? I think you should
have met some issue and you meant to fix it, right? If so, you should state
that here.

	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-12 15:11                 ` Dey, Souvik
  2016-09-14  0:25                   ` Dey, Souvik
@ 2016-09-14 12:15                   ` Kavanagh, Mark B
  2016-09-14 21:12                     ` Dey, Souvik
  2016-09-20  7:11                     ` Yuanhan Liu
  1 sibling, 2 replies; 19+ messages in thread
From: Kavanagh, Mark B @ 2016-09-14 12:15 UTC (permalink / raw)
  To: 'Dey, Souvik', Yuanhan Liu; +Cc: dev, stephen

>
>>
>>Hi Mark/Liu,
>>              Thanks to both of you for being so patient with a series
>>of silly errors. I have tried to make it better this time. Also there
>>were some un-used variable in the function which I have removed. Please
>>check the new patch with all your comments incorporated. Also along with the L2_HDR_LEN and
>L2_CRC_LEN, I have taken in consideration the VLAN_LEN too.
>>
>>One doubt though,
>>"9728 is the largest L2 frame size allowed by the NIC" -- this 9728
>>size is some constrain due to DPDK as the virtio driver in the kernel
>>can support till mtu size of 68 to 65535, where as in DPDK pmd we are trying with 64 to
>9728.
>
>Yes, I meant the NIC as controlled by a DPDK PMD (I thought this was implicit, given the
>context of this discussion). I'll be more explicit in future mails though.
>
>>
>>drivers/net/virtio/virtio_ethdev.c | 19 +++++++++++++++++++
>>1 file changed, 19 insertions(+)
>>
>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>b/drivers/net/virtio/virtio_ethdev.c
>>index 07d6449..da16ad4 100644
>>--- a/drivers/net/virtio/virtio_ethdev.c
>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>@@ -653,12 +653,20 @@ virtio_dev_allmulticast_disable(struct
>>rte_eth_dev *dev)
>>                PMD_INIT_LOG(ERR, "Failed to disable allmulticast"); }
>>
>>+#define VLAN_TAG_LEN           4    /* 802.3ac tag (not DMA'd) */
>>+
>>+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
>
>One thing on this function: it doesn't actually set any fields, but rather just sanitizes
>'mtu'.
>Maybe this is acceptable, since the calling function (i.e. rte_eth_dev_set_mtu) sets
>rte_eth_dev->data->mtu?
>[Dey, Souvik]  Yes , only the sanity check for the mtu is required here and the setting of
>the call back, else the rte_eth_dev_set_mtu() just returns without setting the MTU in the
>rte_eth_dev->data->mtu.

Hi Souvik, apologies for the delayed response.

That's what I thought, just wanted to verify that no additional structures should be updated here.

>
>>+{
>>+       struct rte_eth_dev_info dev_info;
>>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN +
>>+VLAN_TAG_LEN;
>>+       uint32_t frame_size = mtu + ether_hdr_len;
>>+
>>+       virtio_dev_info_get(dev, &dev_info);
>>+
>>+       if (mtu < dev_info.min_rx_bufsize || frame_size >
>>+dev_info.max_rx_pktlen) {
>
>It's not clear to me whether 'mtu' in this case should be compared with ETHER_MIN_MTU, as per
>other DPDK drivers, or alternatively whether 'frame_size' should be compared with
>dev_info.min_rx_bufsize.
>Any thoughts?
>[Dey, Souvik] I am not sure why virtio min_rx_bufsize is less than ETHER_MIN_MTU, i think it
>will be good to have the  compare statement as
>If(frame_size < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen) , then error. What do
>you suggest ?

Again, this all depends on what 'mtu' means in this context.

Since you mentioned previously that it relates to the packet (i.e. L3) length, and not the frame (i.e. L2) length, I would suggest that the comparison should be:

	if (mtu < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen)

Yuanhan, any thoughts on this?

>
>>+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",
>>+                               dev_info.min_rx_bufsize,
>As above.
>
>>+                               (dev_info.max_rx_pktlen -
>>+ether_hdr_len));
>>+               return -EINVAL;
>>+       }
>>+       return 0;
>>+}
>>@@ -677,7 +685,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops
>>= {
>>        .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>        .allmulticast_disable    = virtio_dev_allmulticast_disable,
>>+       .mtu_set                 = virtio_mtu_set,
>>        .dev_infos_get           = virtio_dev_info_get,
>>        .stats_get               = virtio_dev_stats_get,
>>        .xstats_get              = virtio_dev_xstats_get,
>>
>>
>>--
>>Regards,
>>Souvik
>>
>>-----Original Message-----
>>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>>Sent: Friday, September 9, 2016 11:44 AM
>>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu
>><yuanhan.liu@linux.intel.com>
>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>>
>>>Hi Mark,
>>>
>>>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .
>>>Thanks.
>>>The MTU here is L3 MTU.  Setting this will help in reducing the
>>>fragmented/multi-segmented packets and also in case we want to reduce
>>>the MTU below 1500, to support VXLAN or GRE tunnel for the packets in
>>>openstack and cloud
>>environments.
>>>
>>>---
>>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>> 1 file changed, 12 insertions(+)
>>>
>>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>b/drivers/net/virtio/virtio_ethdev.c
>>>index 07d6449..da16ad4 100644
>>>--- a/drivers/net/virtio/virtio_ethdev.c
>>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>>
>>>static int virtio_dev_queue_stats_mapping_set(
>>>            __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6
>>>+653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>                           PMD_INIT_LOG(ERR, "Failed to disable
>>>allmulticast");  }
>>>
>>>+static int
>>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>+          struct virtio_hw *hw = dev->data->dev_private;
>>>+          if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>+VIRTIO_MAX_RX_PKTLEN) {
>>
>>If MTU is the L3 MTU as you've indicated, then you need to take account
>>of L2 overhead before performing the comparison above.
>>Say the user supplies 'mtu' as 9728 - the corresponding minimum frame
>>size is L2_HDR_LEN +
>>9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can
>>accommodate (note that 9728 is the largest L2 frame size allowed by the NIC, not the largest
>IP packet size).
>>
>>>+                        PMD_INIT_LOG(ERR, "Mtu should be between
>>>+VIRTIO_MIN_RX_BUFSIZE and
>>>VIRTIO_MAX_RX_PKTLEN \n");
>>
>>Two things on this statement:
>>1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely
>>means very little, and as such is not helpful. I suggest going with the
>>format that I included in my earlier mail, which prints the numeric
>>value of the min and max rx defines
>>2) <micronit> MTU is an initialization, and should be printed as such
>>in a log (i.e. all
>>caps) </micronit>
>>
>>Hope this helps,
>>Mark
>>
>>>+                        return -EINVAL;
>>>+          }
>>>+          return 0;
>>>+}
>>>+
>>> /*
>>>  * dev_ops for virtio, bare necessities for basic operation
>>>  */
>>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops virtio_eth_dev_ops
>>>= {
>>>            .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>>            .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>>            .allmulticast_disable    =
>>>virtio_dev_allmulticast_disable,
>>>+          .mtu_set                 = virtio_mtu_set,
>>>
>>>            .dev_infos_get           = virtio_dev_info_get,
>>>            .stats_get               = virtio_dev_stats_get,
>>>--
>>>
>>>--
>>>Regards,
>>>Souvik
>>>-----Original Message-----
>>>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>>>Sent: Friday, September 9, 2016 11:05 AM
>>>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu
>>><yuanhan.liu@linux.intel.com>
>>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>>>
>>>>
>>>>Hi Liu,
>>>>
>>>>Yes agreed your comment. I will definitely remove the declaration as
>>>>it is not really required.
>>>> So the latest patch will look like this . Yes I did rush a bit to
>>>>submit the patch last will correct my suite. So sending the patch in
>>>>a reply if we have more comments we can take a look and they
>>>>re-submit the final reviewed
>>>patch. Thanks for the help though.
>>>>
>>>>---
>>>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>> 1 file changed, 12 insertions(+)
>>>>
>>>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>>b/drivers/net/virtio/virtio_ethdev.c
>>>>index 07d6449..da16ad4 100644
>>>>--- a/drivers/net/virtio/virtio_ethdev.c
>>>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>>>
>>>>+static int
>>>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>>+        struct virtio_hw *hw = dev->data->dev_private;
>>>>+        if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>>+VIRTIO_MAX_RX_PKTLEN) {
>>>>+                      PMD_INIT_LOG(ERR, "Mtu should be between 64
>>>>+and 9728\n");
>>>
>>>Hi Souvik,
>>>
>>>Why hardcode the values in the PMD_INIT_LOG?
>>>
>>>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between %d
>>>and %d",
>>>
>>       VIRTIO_MIN_RX_BUFSIZE,
>>>
>>>VIRTIO_MAX
>>_RX_PKTLEN);
>>>
>>>That way, if the values that the macros evaluate to change, the log
>>>will update correspondingly.
>>>
>>>Also, does 'MTU' in this context relate to the L2 or L3 MTU?
>>>
>>>>+                      return -EINVAL;
>>>>+        }
>>>>+        return 0;
>>>>+}
>>>>+
>>>> /*
>>>>  * dev_ops for virtio, bare necessities for basic operation
>>>>  */
>>>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops
>>>>virtio_eth_dev_ops = {
>>>>          .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>>>          .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>>>          .allmulticast_disable    = virtio_dev_allmulticast_disable,
>>>>+        .mtu_set                 = virtio_mtu_set,
>>>>
>>>>          .dev_infos_get           = virtio_dev_info_get,
>>>>          .stats_get               = virtio_dev_stats_get,
>>>>--
>>>>
>>>>--
>>>>Regards,
>>>>Souvik
>>>>
>>>>-----Original Message-----
>>>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>>>>Sent: Friday, September 9, 2016 3:00 AM
>>>>To: Dey, Souvik <sodey@sonusnet.com>
>>>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>>>>
>>>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>>>>> Hi Liu,
>>>>>        Submitted the version 4 of the patch as you suggested ,
>>>>
>>>>Your patch is looking much better. But not really, you ignored few of my comments.
>>>>
>>>>> and have removed the Reviewed by line.
>>>>> I have still kept the function definition as to follow the same
>>>>> suit as we have done for
>>>>other eth_dev_ops.
>>>>
>>>>That's because most of the method implementions are after the
>>>>reference, thus the declaration is needed.
>>>>
>>>>For your case, I see no good reason to do that. BTW, if you disagree
>>>>with my comment, you shoud made a reply, instead of rushing to sending a new version.
>>>>
>>>>> --
>>>>> Regards,
>>>>> Souvik
>>>>>
>>>>> -----Original Message-----
>>>>> From: Dey, Souvik
>>>>> Sent: Wednesday, September 7, 2016 12:19 AM
>>>>> To: dev@dpdk.org; stephen@networkplumber.org;
>>>>> yuanhan.liu@linux.intel.com
>>>>> Cc: Dey, Souvik <sodey@sonusnet.com>
>>>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>>>>
>>>>>
>>>>> Virtio interfaces should also support setting of mtu, as in case of
>>>>> cloud it is expected to
>>>>have the consistent mtu across the infrastructure that the dhcp
>>>>server sends and not hardcoded to 1500(default).
>>>>>
>>>>> Changes in v4: Incorporated review comments.
>>>>> Changes in v3: Corrected few style errors as reported by sys-stv.
>>>>> Changes in v2: Incorporated review comments.
>>>>
>>>>DPDK prefers to put the change log to ...
>>>>>
>>>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>>>>
>>>>> ---
>>>>
>>>>... here.
>>>>
>>>>So that they will be showed in mailing list (for review), but they
>>>>will be gone after
>>apply.
>>>>In another word, we don't like to see those change log in git
>>>>history, but we'd like to see them while review.
>>>>
>>>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>>>  1 file changed, 12 insertions(+)
>>>>>
>>>>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>>> b/drivers/net/virtio/virtio_ethdev.c
>>>>> index 07d6449..da16ad4 100644
>>>>> --- a/drivers/net/virtio/virtio_ethdev.c
>>>>> +++ b/drivers/net/virtio/virtio_ethdev.c
>>>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct
>>>>> rte_eth_dev *dev,  static void
>>>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
>>>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>>>>>                                                   struct ether_addr
>>>>>*mac_addr);
>>>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
>>>>>
>>>>>  static int virtio_dev_queue_stats_mapping_set(
>>>>>        __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16
>>>>>@@
>>>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>>>                      PMD_INIT_LOG(ERR, "Failed to disable
>>>>>allmulticast");  }
>>>>>
>>>>> +static int
>>>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>>> +     struct virtio_hw *hw = dev->data->dev_private;
>>>>> +     if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>>> +VIRTIO_MAX_RX_PKTLEN) {
>>>>> +                   PMD_INIT_LOG(ERR, "Mtu should be between 64 and
>>>>> +9728\n");
>>>>
>>>>I still saw those numbers.
>>>>
>>>>          --yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-14 12:15                   ` Kavanagh, Mark B
@ 2016-09-14 21:12                     ` Dey, Souvik
  2016-09-20  7:11                     ` Yuanhan Liu
  1 sibling, 0 replies; 19+ messages in thread
From: Dey, Souvik @ 2016-09-14 21:12 UTC (permalink / raw)
  To: Kavanagh, Mark B, Yuanhan Liu; +Cc: dev, stephen

Hi Mark/Liu,
	I know this might be a redundant question, but should I put your names in the Reviewed-by section in v5 ? 

--
Regards,
Souvik

-----Original Message-----
From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com] 
Sent: Wednesday, September 14, 2016 8:16 AM
To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: dev@dpdk.org; stephen@networkplumber.org
Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio

>
>>
>>Hi Mark/Liu,
>>              Thanks to both of you for being so patient with a series 
>>of silly errors. I have tried to make it better this time. Also there 
>>were some un-used variable in the function which I have removed. 
>>Please check the new patch with all your comments incorporated. Also 
>>along with the L2_HDR_LEN and
>L2_CRC_LEN, I have taken in consideration the VLAN_LEN too.
>>
>>One doubt though,
>>"9728 is the largest L2 frame size allowed by the NIC" -- this 9728 
>>size is some constrain due to DPDK as the virtio driver in the kernel 
>>can support till mtu size of 68 to 65535, where as in DPDK pmd we are 
>>trying with 64 to
>9728.
>
>Yes, I meant the NIC as controlled by a DPDK PMD (I thought this was 
>implicit, given the context of this discussion). I'll be more explicit in future mails though.
>
>>
>>drivers/net/virtio/virtio_ethdev.c | 19 +++++++++++++++++++
>>1 file changed, 19 insertions(+)
>>
>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>b/drivers/net/virtio/virtio_ethdev.c
>>index 07d6449..da16ad4 100644
>>--- a/drivers/net/virtio/virtio_ethdev.c
>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>@@ -653,12 +653,20 @@ virtio_dev_allmulticast_disable(struct
>>rte_eth_dev *dev)
>>                PMD_INIT_LOG(ERR, "Failed to disable allmulticast"); }
>>
>>+#define VLAN_TAG_LEN           4    /* 802.3ac tag (not DMA'd) */
>>+
>>+static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
>
>One thing on this function: it doesn't actually set any fields, but 
>rather just sanitizes 'mtu'.
>Maybe this is acceptable, since the calling function (i.e. 
>rte_eth_dev_set_mtu) sets rte_eth_dev->data->mtu?
>[Dey, Souvik]  Yes , only the sanity check for the mtu is required here 
>and the setting of the call back, else the rte_eth_dev_set_mtu() just 
>returns without setting the MTU in the rte_eth_dev->data->mtu.

Hi Souvik, apologies for the delayed response.

That's what I thought, just wanted to verify that no additional structures should be updated here.

>
>>+{
>>+       struct rte_eth_dev_info dev_info;
>>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + 
>>+VLAN_TAG_LEN;
>>+       uint32_t frame_size = mtu + ether_hdr_len;
>>+
>>+       virtio_dev_info_get(dev, &dev_info);
>>+
>>+       if (mtu < dev_info.min_rx_bufsize || frame_size >
>>+dev_info.max_rx_pktlen) {
>
>It's not clear to me whether 'mtu' in this case should be compared with 
>ETHER_MIN_MTU, as per other DPDK drivers, or alternatively whether 
>'frame_size' should be compared with dev_info.min_rx_bufsize.
>Any thoughts?
>[Dey, Souvik] I am not sure why virtio min_rx_bufsize is less than 
>ETHER_MIN_MTU, i think it will be good to have the  compare statement 
>as If(frame_size < ETHER_MIN_MTU || frame_size > 
>dev_info.max_rx_pktlen) , then error. What do you suggest ?

Again, this all depends on what 'mtu' means in this context.

Since you mentioned previously that it relates to the packet (i.e. L3) length, and not the frame (i.e. L2) length, I would suggest that the comparison should be:

	if (mtu < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen)

Yuanhan, any thoughts on this?

>
>>+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",
>>+                               dev_info.min_rx_bufsize,
>As above.
>
>>+                               (dev_info.max_rx_pktlen - 
>>+ether_hdr_len));
>>+               return -EINVAL;
>>+       }
>>+       return 0;
>>+}
>>@@ -677,7 +685,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops 
>>= {
>>        .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>        .allmulticast_disable    = virtio_dev_allmulticast_disable,
>>+       .mtu_set                 = virtio_mtu_set,
>>        .dev_infos_get           = virtio_dev_info_get,
>>        .stats_get               = virtio_dev_stats_get,
>>        .xstats_get              = virtio_dev_xstats_get,
>>
>>
>>--
>>Regards,
>>Souvik
>>
>>-----Original Message-----
>>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>>Sent: Friday, September 9, 2016 11:44 AM
>>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu 
>><yuanhan.liu@linux.intel.com>
>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>>
>>>
>>>Hi Mark,
>>>
>>>Yes I thought I did that change. Sorry once again.. making too many mistakes. Changed it .
>>>Thanks.
>>>The MTU here is L3 MTU.  Setting this will help in reducing the 
>>>fragmented/multi-segmented packets and also in case we want to reduce 
>>>the MTU below 1500, to support VXLAN or GRE tunnel for the packets in 
>>>openstack and cloud
>>environments.
>>>
>>>---
>>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>> 1 file changed, 12 insertions(+)
>>>
>>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>b/drivers/net/virtio/virtio_ethdev.c
>>>index 07d6449..da16ad4 100644
>>>--- a/drivers/net/virtio/virtio_ethdev.c
>>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>>
>>>static int virtio_dev_queue_stats_mapping_set(
>>>            __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6
>>>+653,16 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>                           PMD_INIT_LOG(ERR, "Failed to disable 
>>>allmulticast");  }
>>>
>>>+static int
>>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>+          struct virtio_hw *hw = dev->data->dev_private;
>>>+          if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>+VIRTIO_MAX_RX_PKTLEN) {
>>
>>If MTU is the L3 MTU as you've indicated, then you need to take 
>>account of L2 overhead before performing the comparison above.
>>Say the user supplies 'mtu' as 9728 - the corresponding minimum frame 
>>size is L2_HDR_LEN +
>>9728 + L2_CRC_LEN = 9746 bytes, which is larger than the NIC can 
>>accommodate (note that 9728 is the largest L2 frame size allowed by 
>>the NIC, not the largest
>IP packet size).
>>
>>>+                        PMD_INIT_LOG(ERR, "Mtu should be between 
>>>+VIRTIO_MIN_RX_BUFSIZE and
>>>VIRTIO_MAX_RX_PKTLEN \n");
>>
>>Two things on this statement:
>>1) in the context of a log message, VIRTIO_XXX_RX_BUFSIZE most likely 
>>means very little, and as such is not helpful. I suggest going with 
>>the format that I included in my earlier mail, which prints the 
>>numeric value of the min and max rx defines
>>2) <micronit> MTU is an initialization, and should be printed as such 
>>in a log (i.e. all
>>caps) </micronit>
>>
>>Hope this helps,
>>Mark
>>
>>>+                        return -EINVAL;
>>>+          }
>>>+          return 0;
>>>+}
>>>+
>>> /*
>>>  * dev_ops for virtio, bare necessities for basic operation
>>>  */
>>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops 
>>>virtio_eth_dev_ops = {
>>>            .promiscuous_disable     = 
>>>virtio_dev_promiscuous_disable,
>>>            .allmulticast_enable     = 
>>>virtio_dev_allmulticast_enable,
>>>            .allmulticast_disable    = 
>>>virtio_dev_allmulticast_disable,
>>>+          .mtu_set                 = virtio_mtu_set,
>>>
>>>            .dev_infos_get           = virtio_dev_info_get,
>>>            .stats_get               = virtio_dev_stats_get,
>>>--
>>>
>>>--
>>>Regards,
>>>Souvik
>>>-----Original Message-----
>>>From: Kavanagh, Mark B [mailto:mark.b.kavanagh@intel.com]
>>>Sent: Friday, September 9, 2016 11:05 AM
>>>To: Dey, Souvik <sodey@sonusnet.com>; Yuanhan Liu 
>>><yuanhan.liu@linux.intel.com>
>>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>>Subject: RE: [PATCH v4]net/virtio: add mtu set in virtio
>>>
>>>>
>>>>Hi Liu,
>>>>
>>>>Yes agreed your comment. I will definitely remove the declaration as 
>>>>it is not really required.
>>>> So the latest patch will look like this . Yes I did rush a bit to 
>>>>submit the patch last will correct my suite. So sending the patch in 
>>>>a reply if we have more comments we can take a look and they 
>>>>re-submit the final reviewed
>>>patch. Thanks for the help though.
>>>>
>>>>---
>>>> drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>> 1 file changed, 12 insertions(+)
>>>>
>>>>diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>>b/drivers/net/virtio/virtio_ethdev.c
>>>>index 07d6449..da16ad4 100644
>>>>--- a/drivers/net/virtio/virtio_ethdev.c
>>>>+++ b/drivers/net/virtio/virtio_ethdev.c
>>>>
>>>>+static int
>>>>+virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>>+        struct virtio_hw *hw = dev->data->dev_private;
>>>>+        if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>>+VIRTIO_MAX_RX_PKTLEN) {
>>>>+                      PMD_INIT_LOG(ERR, "Mtu should be between 64 
>>>>+and 9728\n");
>>>
>>>Hi Souvik,
>>>
>>>Why hardcode the values in the PMD_INIT_LOG?
>>>
>>>Why not  do the following: PMD_INIT_LOG(ERR, "MTU should be between 
>>>%d and %d",
>>>
>>       VIRTIO_MIN_RX_BUFSIZE,
>>>
>>>VIRTIO_MAX
>>_RX_PKTLEN);
>>>
>>>That way, if the values that the macros evaluate to change, the log 
>>>will update correspondingly.
>>>
>>>Also, does 'MTU' in this context relate to the L2 or L3 MTU?
>>>
>>>>+                      return -EINVAL;
>>>>+        }
>>>>+        return 0;
>>>>+}
>>>>+
>>>> /*
>>>>  * dev_ops for virtio, bare necessities for basic operation
>>>>  */
>>>>@@ -664,6 +675,7 @@ static const struct eth_dev_ops 
>>>>virtio_eth_dev_ops = {
>>>>          .promiscuous_disable     = virtio_dev_promiscuous_disable,
>>>>          .allmulticast_enable     = virtio_dev_allmulticast_enable,
>>>>          .allmulticast_disable    = 
>>>>virtio_dev_allmulticast_disable,
>>>>+        .mtu_set                 = virtio_mtu_set,
>>>>
>>>>          .dev_infos_get           = virtio_dev_info_get,
>>>>          .stats_get               = virtio_dev_stats_get,
>>>>--
>>>>
>>>>--
>>>>Regards,
>>>>Souvik
>>>>
>>>>-----Original Message-----
>>>>From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
>>>>Sent: Friday, September 9, 2016 3:00 AM
>>>>To: Dey, Souvik <sodey@sonusnet.com>
>>>>Cc: dev@dpdk.org; stephen@networkplumber.org
>>>>Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
>>>>
>>>>On Wed, Sep 07, 2016 at 04:21:30AM +0000, Dey, Souvik wrote:
>>>>> Hi Liu,
>>>>>        Submitted the version 4 of the patch as you suggested ,
>>>>
>>>>Your patch is looking much better. But not really, you ignored few of my comments.
>>>>
>>>>> and have removed the Reviewed by line.
>>>>> I have still kept the function definition as to follow the same 
>>>>> suit as we have done for
>>>>other eth_dev_ops.
>>>>
>>>>That's because most of the method implementions are after the 
>>>>reference, thus the declaration is needed.
>>>>
>>>>For your case, I see no good reason to do that. BTW, if you disagree 
>>>>with my comment, you shoud made a reply, instead of rushing to sending a new version.
>>>>
>>>>> --
>>>>> Regards,
>>>>> Souvik
>>>>>
>>>>> -----Original Message-----
>>>>> From: Dey, Souvik
>>>>> Sent: Wednesday, September 7, 2016 12:19 AM
>>>>> To: dev@dpdk.org; stephen@networkplumber.org; 
>>>>> yuanhan.liu@linux.intel.com
>>>>> Cc: Dey, Souvik <sodey@sonusnet.com>
>>>>> Subject: [PATCH v4]net/virtio: add mtu set in virtio
>>>>>
>>>>>
>>>>> Virtio interfaces should also support setting of mtu, as in case 
>>>>> of cloud it is expected to
>>>>have the consistent mtu across the infrastructure that the dhcp 
>>>>server sends and not hardcoded to 1500(default).
>>>>>
>>>>> Changes in v4: Incorporated review comments.
>>>>> Changes in v3: Corrected few style errors as reported by sys-stv.
>>>>> Changes in v2: Incorporated review comments.
>>>>
>>>>DPDK prefers to put the change log to ...
>>>>>
>>>>> Signed-off-by: Souvik Dey <sodey@sonusnet.com>
>>>>>
>>>>> ---
>>>>
>>>>... here.
>>>>
>>>>So that they will be showed in mailing list (for review), but they 
>>>>will be gone after
>>apply.
>>>>In another word, we don't like to see those change log in git 
>>>>history, but we'd like to see them while review.
>>>>
>>>>>  drivers/net/virtio/virtio_ethdev.c | 12 ++++++++++++
>>>>>  1 file changed, 12 insertions(+)
>>>>>
>>>>> diff --git a/drivers/net/virtio/virtio_ethdev.c
>>>>> b/drivers/net/virtio/virtio_ethdev.c
>>>>> index 07d6449..da16ad4 100644
>>>>> --- a/drivers/net/virtio/virtio_ethdev.c
>>>>> +++ b/drivers/net/virtio/virtio_ethdev.c
>>>>> @@ -92,6 +92,7 @@ static void virtio_mac_addr_add(struct 
>>>>> rte_eth_dev *dev,  static void
>>>>virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index); 
>>>>static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>>>>>                                                   struct 
>>>>>ether_addr *mac_addr);
>>>>> +static int  virtio_mtu_set(struct rte_eth_dev *dev, uint16_t 
>>>>> +mtu);
>>>>>
>>>>>  static int virtio_dev_queue_stats_mapping_set(
>>>>>        __rte_unused struct rte_eth_dev *eth_dev, @@ -652,6 +653,16 
>>>>>@@
>>>>virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
>>>>>                      PMD_INIT_LOG(ERR, "Failed to disable 
>>>>>allmulticast");  }
>>>>>
>>>>> +static int
>>>>> +virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) {
>>>>> +     struct virtio_hw *hw = dev->data->dev_private;
>>>>> +     if (mtu < VIRTIO_MIN_RX_BUFSIZE || mtu >
>>>>> +VIRTIO_MAX_RX_PKTLEN) {
>>>>> +                   PMD_INIT_LOG(ERR, "Mtu should be between 64 
>>>>> +and 9728\n");
>>>>
>>>>I still saw those numbers.
>>>>
>>>>          --yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-14 12:15                   ` Kavanagh, Mark B
  2016-09-14 21:12                     ` Dey, Souvik
@ 2016-09-20  7:11                     ` Yuanhan Liu
  2016-09-20 18:42                       ` Dey, Souvik
  1 sibling, 1 reply; 19+ messages in thread
From: Yuanhan Liu @ 2016-09-20  7:11 UTC (permalink / raw)
  To: Kavanagh, Mark B; +Cc: 'Dey, Souvik', dev, stephen

On Wed, Sep 14, 2016 at 12:15:37PM +0000, Kavanagh, Mark B wrote:
> >
> >>+{
> >>+       struct rte_eth_dev_info dev_info;
> >>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN +
> >>+VLAN_TAG_LEN;
> >>+       uint32_t frame_size = mtu + ether_hdr_len;
> >>+
> >>+       virtio_dev_info_get(dev, &dev_info);
> >>+
> >>+       if (mtu < dev_info.min_rx_bufsize || frame_size >
> >>+dev_info.max_rx_pktlen) {
> >
> >It's not clear to me whether 'mtu' in this case should be compared with ETHER_MIN_MTU, as per
> >other DPDK drivers, or alternatively whether 'frame_size' should be compared with
> >dev_info.min_rx_bufsize.
> >Any thoughts?
> >[Dey, Souvik] I am not sure why virtio min_rx_bufsize is less than ETHER_MIN_MTU, i think it
> >will be good to have the  compare statement as
> >If(frame_size < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen) , then error. What do
> >you suggest ?
> 
> Again, this all depends on what 'mtu' means in this context.
> 
> Since you mentioned previously that it relates to the packet (i.e. L3) length, and not the frame (i.e. L2) length, I would suggest that the comparison should be:
> 
> 	if (mtu < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen)
> 
> Yuanhan, any thoughts on this?

I think you are right. At least, that's how the ixgbe PMD driver code
looks like.

	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-20  7:11                     ` Yuanhan Liu
@ 2016-09-20 18:42                       ` Dey, Souvik
  2016-09-21  2:21                         ` Yuanhan Liu
  0 siblings, 1 reply; 19+ messages in thread
From: Dey, Souvik @ 2016-09-20 18:42 UTC (permalink / raw)
  To: Yuanhan Liu, Kavanagh, Mark B; +Cc: dev, stephen

I have already taken care of this in v5 of the patch , If possible please review the same .

-----Original Message-----
From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com] 
Sent: Tuesday, September 20, 2016 3:12 AM
To: Kavanagh, Mark B <mark.b.kavanagh@intel.com>
Cc: Dey, Souvik <sodey@sonusnet.com>; dev@dpdk.org; stephen@networkplumber.org
Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio

On Wed, Sep 14, 2016 at 12:15:37PM +0000, Kavanagh, Mark B wrote:
> >
> >>+{
> >>+       struct rte_eth_dev_info dev_info;
> >>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + 
> >>+VLAN_TAG_LEN;
> >>+       uint32_t frame_size = mtu + ether_hdr_len;
> >>+
> >>+       virtio_dev_info_get(dev, &dev_info);
> >>+
> >>+       if (mtu < dev_info.min_rx_bufsize || frame_size >
> >>+dev_info.max_rx_pktlen) {
> >
> >It's not clear to me whether 'mtu' in this case should be compared 
> >with ETHER_MIN_MTU, as per other DPDK drivers, or alternatively 
> >whether 'frame_size' should be compared with dev_info.min_rx_bufsize.
> >Any thoughts?
> >[Dey, Souvik] I am not sure why virtio min_rx_bufsize is less than 
> >ETHER_MIN_MTU, i think it will be good to have the  compare statement 
> >as If(frame_size < ETHER_MIN_MTU || frame_size > 
> >dev_info.max_rx_pktlen) , then error. What do you suggest ?
> 
> Again, this all depends on what 'mtu' means in this context.
> 
> Since you mentioned previously that it relates to the packet (i.e. L3) length, and not the frame (i.e. L2) length, I would suggest that the comparison should be:
> 
> 	if (mtu < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen)
> 
> Yuanhan, any thoughts on this?

I think you are right. At least, that's how the ixgbe PMD driver code looks like.

	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio
  2016-09-20 18:42                       ` Dey, Souvik
@ 2016-09-21  2:21                         ` Yuanhan Liu
  0 siblings, 0 replies; 19+ messages in thread
From: Yuanhan Liu @ 2016-09-21  2:21 UTC (permalink / raw)
  To: Dey, Souvik; +Cc: Kavanagh, Mark B, dev, stephen

On Tue, Sep 20, 2016 at 06:42:02PM +0000, Dey, Souvik wrote:
> I have already taken care of this in v5 of the patch , If possible please review the same .

I don't think so, otherwise I would not comment here.

BTW, there is a format error: you used white space instead of TAB for
indention.

You might want to send another version, to fix above two issues. Or,
if you don't mind, I could fix them for you and apply it.

	--yliu
> 
> -----Original Message-----
> From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com] 
> Sent: Tuesday, September 20, 2016 3:12 AM
> To: Kavanagh, Mark B <mark.b.kavanagh@intel.com>
> Cc: Dey, Souvik <sodey@sonusnet.com>; dev@dpdk.org; stephen@networkplumber.org
> Subject: Re: [PATCH v4]net/virtio: add mtu set in virtio
> 
> On Wed, Sep 14, 2016 at 12:15:37PM +0000, Kavanagh, Mark B wrote:
> > >
> > >>+{
> > >>+       struct rte_eth_dev_info dev_info;
> > >>+       uint32_t ether_hdr_len = ETHER_HDR_LEN + ETHER_CRC_LEN + 
> > >>+VLAN_TAG_LEN;
> > >>+       uint32_t frame_size = mtu + ether_hdr_len;
> > >>+
> > >>+       virtio_dev_info_get(dev, &dev_info);
> > >>+
> > >>+       if (mtu < dev_info.min_rx_bufsize || frame_size >
> > >>+dev_info.max_rx_pktlen) {
> > >
> > >It's not clear to me whether 'mtu' in this case should be compared 
> > >with ETHER_MIN_MTU, as per other DPDK drivers, or alternatively 
> > >whether 'frame_size' should be compared with dev_info.min_rx_bufsize.
> > >Any thoughts?
> > >[Dey, Souvik] I am not sure why virtio min_rx_bufsize is less than 
> > >ETHER_MIN_MTU, i think it will be good to have the  compare statement 
> > >as If(frame_size < ETHER_MIN_MTU || frame_size > 
> > >dev_info.max_rx_pktlen) , then error. What do you suggest ?
> > 
> > Again, this all depends on what 'mtu' means in this context.
> > 
> > Since you mentioned previously that it relates to the packet (i.e. L3) length, and not the frame (i.e. L2) length, I would suggest that the comparison should be:
> > 
> > 	if (mtu < ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen)
> > 
> > Yuanhan, any thoughts on this?
> 
> I think you are right. At least, that's how the ixgbe PMD driver code looks like.
> 
> 	--yliu

^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2016-09-21  2:20 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-07  4:18 [dpdk-dev] [PATCH v4]net/virtio: add mtu set in virtio souvikdey33
2016-09-07  4:21 ` Dey, Souvik
2016-09-09  7:00   ` Yuanhan Liu
2016-09-09 14:19     ` Dey, Souvik
2016-09-09 15:05       ` Kavanagh, Mark B
2016-09-09 15:33         ` Dey, Souvik
2016-09-09 15:42           ` Yuanhan Liu
2016-09-09 15:43           ` Kavanagh, Mark B
2016-09-09 18:16             ` Dey, Souvik
2016-09-12 14:25               ` Dey, Souvik
2016-09-12 14:47               ` Kavanagh, Mark B
2016-09-12 15:11                 ` Dey, Souvik
2016-09-14  0:25                   ` Dey, Souvik
2016-09-14  4:32                     ` Yuanhan Liu
2016-09-14 12:15                   ` Kavanagh, Mark B
2016-09-14 21:12                     ` Dey, Souvik
2016-09-20  7:11                     ` Yuanhan Liu
2016-09-20 18:42                       ` Dey, Souvik
2016-09-21  2:21                         ` Yuanhan Liu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).