[dpdk-dev] [PATCH 1/2] net/enic: fix error in init of RQ when not using Rx scatter

[John Daley <johndale@cisco.com>]

From: Nelson Escobar <neescoba@cisco.com>

The Rx scatter patch was accidentally setting the index of the
secondary receive queue in the primary receive queue's initialization
when the secondary receive queue wasn't needed and was disabled.  This
caused some misleading hardware counters in some situations.

Fixes: 856d7ba7ed22 ("net/enic: support scattered Rx")

Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
---
 drivers/net/enic/base/vnic_rq.c | 6 ++++--
 drivers/net/enic/base/vnic_rq.h | 1 +
 drivers/net/enic/enic_main.c    | 2 ++
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/enic/base/vnic_rq.c b/drivers/net/enic/base/vnic_rq.c
index 0e700a1..10a40c1 100644
--- a/drivers/net/enic/base/vnic_rq.c
+++ b/drivers/net/enic/base/vnic_rq.c
@@ -87,9 +87,11 @@ void vnic_rq_init_start(struct vnic_rq *rq, unsigned int cq_index,
 	iowrite32(0, &rq->ctrl->error_status);
 	iowrite32(fetch_index, &rq->ctrl->fetch_index);
 	iowrite32(posted_index, &rq->ctrl->posted_index);
-	if (rq->is_sop)
-		iowrite32(((rq->is_sop << 10) | rq->data_queue_idx),
+	if (rq->data_queue_enable)
+		iowrite32(((1 << 10) | rq->data_queue_idx),
 			  &rq->ctrl->data_ring);
+	else
+		iowrite32(0, &rq->ctrl->data_ring);
 }
 
 void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
diff --git a/drivers/net/enic/base/vnic_rq.h b/drivers/net/enic/base/vnic_rq.h
index 7d96b0f..f3fd39f 100644
--- a/drivers/net/enic/base/vnic_rq.h
+++ b/drivers/net/enic/base/vnic_rq.h
@@ -91,6 +91,7 @@ struct vnic_rq {
 	uint16_t rxst_idx;
 	uint32_t tot_pkts;
 	uint16_t data_queue_idx;
+	uint8_t data_queue_enable;
 	uint8_t is_sop;
 	uint8_t in_use;
 	struct rte_mbuf *pkt_first_seg;
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 622b317..836dcfe 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -640,10 +640,12 @@ int enic_alloc_rq(struct enic *enic, uint16_t queue_idx,
 
 	if (mbufs_per_pkt > 1) {
 		dev_info(enic, "Rq %u Scatter rx mode in use\n", queue_idx);
+		rq_sop->data_queue_enable = 1;
 		rq_data->in_use = 1;
 	} else {
 		dev_info(enic, "Rq %u Scatter rx mode not being used\n",
 			 queue_idx);
+		rq_sop->data_queue_enable = 0;
 		rq_data->in_use = 0;
 	}
 
-- 
2.10.0