From: Ferruh Yigit <ferruh.yigit@intel.com>
To: dev@dpdk.org
Cc: Thomas Monjalon <thomas.monjalon@6wind.com>,
Ferruh Yigit <ferruh.yigit@intel.com>
Subject: [dpdk-dev] [PATCH v3] ethdev: cleanup device ops struct whitespace
Date: Thu, 22 Dec 2016 13:10:13 +0000 [thread overview]
Message-ID: <20161222131013.28516-1-ferruh.yigit@intel.com> (raw)
In-Reply-To: <20161222115330.7164-1-ferruh.yigit@intel.com>
- Grouped related items using empty lines
- Aligned arguments to same column
- All item comments that doesn't fit same line are placed blow the item
itself
- Moved some comments to same line if overall line < 100 chars
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
- ! This patch has the problem of trashing the git history for the struct,
which is indeed valid argument.
- Some re-ordering also may be required which I hesitate to do
- Some item comments doesn't give extra information and can be removed
v3:
- group MAC, MTU, promisc and allmuti functions together
- group rxq/txq_info_get with dev_infos_get
- group l2_tunnel_* and udp_tunnel_* functions together
v2:
- extract mtu_set into new group
- move rss_hash_* to reta_* group
- move set_mc_addr_list to mac_addr_* group
- move set_vf_rate_limit to set_vf_* group
- move get_dcb_info out of timesync_* group
To make it easy to comment to latest struct, copy-paste here:
struct eth_dev_ops {
eth_dev_configure_t dev_configure; /**< Configure device. */
eth_dev_start_t dev_start; /**< Start device. */
eth_dev_stop_t dev_stop; /**< Stop device. */
eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
eth_dev_close_t dev_close; /**< Close device. */
eth_link_update_t link_update; /**< Get device link state. */
eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */
eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */
eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */
eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address. */
eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address. */
eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address. */
eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs. */
mtu_set_t mtu_set; /**< Set MTU. */
eth_stats_get_t stats_get; /**< Get generic device statistics. */
eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */
eth_xstats_get_t xstats_get; /**< Get extended device statistics. */
eth_xstats_reset_t xstats_reset; /**< Reset extended device statistics. */
eth_xstats_get_names_t xstats_get_names;
/**< Get names of extended statistics. */
eth_queue_stats_mapping_set_t queue_stats_mapping_set;
/**< Configure per queue stat counter mapping. */
eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
eth_rxq_info_get_t rxq_info_get; /**< retrieve RX queue information. */
eth_txq_info_get_t txq_info_get; /**< retrieve TX queue information. */
eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
/**< Get packet types supported and identified by device. */
vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */
vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */
vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion. */
eth_queue_start_t rx_queue_start;/**< Start RX for a queue. */
eth_queue_stop_t rx_queue_stop; /**< Stop RX for a queue. */
eth_queue_start_t tx_queue_start;/**< Start TX for a queue. */
eth_queue_stop_t tx_queue_stop; /**< Stop TX for a queue. */
eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue. */
eth_queue_release_t rx_queue_release; /**< Release RX queue. */
eth_rx_queue_count_t rx_queue_count;/**< Get Rx queue count. */
eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */
eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */
eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */
eth_queue_release_t tx_queue_release; /**< Release TX queue. */
eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
eth_dev_led_off_t dev_led_off; /**< Turn off LED. */
flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */
flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */
priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control. */
eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array. */
eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap. */
eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule. */
eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule. */
eth_set_vf_rx_mode_t set_vf_rx_mode;/**< Set VF RX mode. */
eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive. */
eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit. */
eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter. */
eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit. */
eth_udp_tunnel_port_add_t udp_tunnel_port_add; /** Add UDP tunnel port. */
eth_udp_tunnel_port_del_t udp_tunnel_port_del; /** Del UDP tunnel port. */
eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
/** Config ether type of l2 tunnel. */
eth_l2_tunnel_offload_set_t l2_tunnel_offload_set;
/** Enable/disable l2 tunnel offload functions. */
eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit. */
rss_hash_update_t rss_hash_update; /** Configure RSS hash protocols. */
rss_hash_conf_get_t rss_hash_conf_get; /** Get current RSS hash configuration. */
reta_update_t reta_update; /** Update redirection table. */
reta_query_t reta_query; /** Query redirection table. */
eth_get_reg_t get_reg; /**< Get registers. */
eth_get_eeprom_length_t get_eeprom_length; /**< Get eeprom length. */
eth_get_eeprom_t get_eeprom; /**< Get eeprom data. */
eth_set_eeprom_t set_eeprom; /**< Set eeprom. */
/* bypass control */
\#ifdef RTE_NIC_BYPASS
bypass_init_t bypass_init;
bypass_state_set_t bypass_state_set;
bypass_state_show_t bypass_state_show;
bypass_event_set_t bypass_event_set;
bypass_event_show_t bypass_event_show;
bypass_wd_timeout_set_t bypass_wd_timeout_set;
bypass_wd_timeout_show_t bypass_wd_timeout_show;
bypass_ver_show_t bypass_ver_show;
bypass_wd_reset_t bypass_wd_reset;
\#endif
eth_filter_ctrl_t filter_ctrl; /**< common filter control. */
eth_get_dcb_info get_dcb_info; /** Get DCB information. */
eth_timesync_enable_t timesync_enable;
/** Turn IEEE1588/802.1AS timestamping on. */
eth_timesync_disable_t timesync_disable;
/** Turn IEEE1588/802.1AS timestamping off. */
eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp;
/** Read the IEEE1588/802.1AS RX timestamp. */
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
/** Read the IEEE1588/802.1AS TX timestamp. */
eth_timesync_adjust_time timesync_adjust_time; /** Adjust the device clock. */
eth_timesync_read_time timesync_read_time; /** Get the device clock time. */
eth_timesync_write_time timesync_write_time; /** Set the device clock time. */
};
---
lib/librte_ether/rte_ethdev.h | 174 +++++++++++++++++++++---------------------
1 file changed, 85 insertions(+), 89 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 52119af..272fd41 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1431,11 +1431,18 @@ struct eth_dev_ops {
eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
eth_dev_close_t dev_close; /**< Close device. */
+ eth_link_update_t link_update; /**< Get device link state. */
+
eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */
eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */
eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */
- eth_link_update_t link_update; /**< Get device link state. */
+ eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address. */
+ eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address. */
+ eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address. */
+ eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs. */
+ mtu_set_t mtu_set; /**< Set MTU. */
+
eth_stats_get_t stats_get; /**< Get generic device statistics. */
eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */
eth_xstats_get_t xstats_get; /**< Get extended device statistics. */
@@ -1444,109 +1451,98 @@ struct eth_dev_ops {
/**< Get names of extended statistics. */
eth_queue_stats_mapping_set_t queue_stats_mapping_set;
/**< Configure per queue stat counter mapping. */
+
eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
+ eth_rxq_info_get_t rxq_info_get; /**< retrieve RX queue information. */
+ eth_txq_info_get_t txq_info_get; /**< retrieve TX queue information. */
eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
- /**< Get packet types supported and identified by device*/
- mtu_set_t mtu_set; /**< Set MTU. */
- vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
- vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
+ /**< Get packet types supported and identified by device. */
+
+ vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
+ vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */
vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */
- vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */
- eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/
- eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/
- eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/
- eth_queue_stop_t tx_queue_stop;/**< Stop TX for a queue.*/
- eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue.*/
- eth_queue_release_t rx_queue_release;/**< Release RX queue.*/
- eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */
- eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */
- /**< Enable Rx queue interrupt. */
- eth_rx_enable_intr_t rx_queue_intr_enable;
- /**< Disable Rx queue interrupt.*/
- eth_rx_disable_intr_t rx_queue_intr_disable;
- eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/
- eth_queue_release_t tx_queue_release;/**< Release TX queue.*/
+ vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion. */
+
+ eth_queue_start_t rx_queue_start;/**< Start RX for a queue. */
+ eth_queue_stop_t rx_queue_stop; /**< Stop RX for a queue. */
+ eth_queue_start_t tx_queue_start;/**< Start TX for a queue. */
+ eth_queue_stop_t tx_queue_stop; /**< Stop TX for a queue. */
+ eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue. */
+ eth_queue_release_t rx_queue_release; /**< Release RX queue. */
+ eth_rx_queue_count_t rx_queue_count;/**< Get Rx queue count. */
+ eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */
+ eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */
+ eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */
+ eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */
+ eth_queue_release_t tx_queue_release; /**< Release TX queue. */
+
eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
eth_dev_led_off_t dev_led_off; /**< Turn off LED. */
+
flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */
flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */
- priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/
- eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */
- eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */
- eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address */
- eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */
- eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */
- eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/
- eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule.*/
- eth_set_vf_rx_mode_t set_vf_rx_mode; /**< Set VF RX mode */
- eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive */
- eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit */
- eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter */
- /** Add UDP tunnel port. */
- eth_udp_tunnel_port_add_t udp_tunnel_port_add;
- /** Del UDP tunnel port. */
- eth_udp_tunnel_port_del_t udp_tunnel_port_del;
- eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit */
- eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit */
- /** Update redirection table. */
- reta_update_t reta_update;
- /** Query redirection table. */
- reta_query_t reta_query;
-
- eth_get_reg_t get_reg;
- /**< Get registers */
- eth_get_eeprom_length_t get_eeprom_length;
- /**< Get eeprom length */
- eth_get_eeprom_t get_eeprom;
- /**< Get eeprom data */
- eth_set_eeprom_t set_eeprom;
- /**< Set eeprom */
- /* bypass control */
+ priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control. */
+
+ eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array. */
+ eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap. */
+
+ eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule. */
+ eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule. */
+
+ eth_set_vf_rx_mode_t set_vf_rx_mode;/**< Set VF RX mode. */
+ eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive. */
+ eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit. */
+ eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter. */
+ eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit. */
+
+ eth_udp_tunnel_port_add_t udp_tunnel_port_add; /** Add UDP tunnel port. */
+ eth_udp_tunnel_port_del_t udp_tunnel_port_del; /** Del UDP tunnel port. */
+ eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
+ /** Config ether type of l2 tunnel. */
+ eth_l2_tunnel_offload_set_t l2_tunnel_offload_set;
+ /** Enable/disable l2 tunnel offload functions. */
+
+ eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit. */
+
+ rss_hash_update_t rss_hash_update; /** Configure RSS hash protocols. */
+ rss_hash_conf_get_t rss_hash_conf_get; /** Get current RSS hash configuration. */
+ reta_update_t reta_update; /** Update redirection table. */
+ reta_query_t reta_query; /** Query redirection table. */
+
+ eth_get_reg_t get_reg; /**< Get registers. */
+ eth_get_eeprom_length_t get_eeprom_length; /**< Get eeprom length. */
+ eth_get_eeprom_t get_eeprom; /**< Get eeprom data. */
+ eth_set_eeprom_t set_eeprom; /**< Set eeprom. */
+
+ /* bypass control */
#ifdef RTE_NIC_BYPASS
- bypass_init_t bypass_init;
- bypass_state_set_t bypass_state_set;
- bypass_state_show_t bypass_state_show;
- bypass_event_set_t bypass_event_set;
- bypass_event_show_t bypass_event_show;
- bypass_wd_timeout_set_t bypass_wd_timeout_set;
- bypass_wd_timeout_show_t bypass_wd_timeout_show;
- bypass_ver_show_t bypass_ver_show;
- bypass_wd_reset_t bypass_wd_reset;
+ bypass_init_t bypass_init;
+ bypass_state_set_t bypass_state_set;
+ bypass_state_show_t bypass_state_show;
+ bypass_event_set_t bypass_event_set;
+ bypass_event_show_t bypass_event_show;
+ bypass_wd_timeout_set_t bypass_wd_timeout_set;
+ bypass_wd_timeout_show_t bypass_wd_timeout_show;
+ bypass_ver_show_t bypass_ver_show;
+ bypass_wd_reset_t bypass_wd_reset;
#endif
- /** Configure RSS hash protocols. */
- rss_hash_update_t rss_hash_update;
- /** Get current RSS hash configuration. */
- rss_hash_conf_get_t rss_hash_conf_get;
- eth_filter_ctrl_t filter_ctrl;
- /**< common filter control. */
- eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs */
- eth_rxq_info_get_t rxq_info_get;
- /**< retrieve RX queue information. */
- eth_txq_info_get_t txq_info_get;
- /**< retrieve TX queue information. */
+ eth_filter_ctrl_t filter_ctrl; /**< common filter control. */
+
+ eth_get_dcb_info get_dcb_info; /** Get DCB information. */
+
+ eth_timesync_enable_t timesync_enable;
/** Turn IEEE1588/802.1AS timestamping on. */
- eth_timesync_enable_t timesync_enable;
+ eth_timesync_disable_t timesync_disable;
/** Turn IEEE1588/802.1AS timestamping off. */
- eth_timesync_disable_t timesync_disable;
- /** Read the IEEE1588/802.1AS RX timestamp. */
eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp;
- /** Read the IEEE1588/802.1AS TX timestamp. */
+ /** Read the IEEE1588/802.1AS RX timestamp. */
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
-
- /** Get DCB information */
- eth_get_dcb_info get_dcb_info;
- /** Adjust the device clock.*/
- eth_timesync_adjust_time timesync_adjust_time;
- /** Get the device clock time. */
- eth_timesync_read_time timesync_read_time;
- /** Set the device clock time. */
- eth_timesync_write_time timesync_write_time;
- /** Config ether type of l2 tunnel */
- eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
- /** Enable/disable l2 tunnel offload functions */
- eth_l2_tunnel_offload_set_t l2_tunnel_offload_set;
+ /** Read the IEEE1588/802.1AS TX timestamp. */
+ eth_timesync_adjust_time timesync_adjust_time; /** Adjust the device clock. */
+ eth_timesync_read_time timesync_read_time; /** Get the device clock time. */
+ eth_timesync_write_time timesync_write_time; /** Set the device clock time. */
};
/**
--
2.9.3
next prev parent reply other threads:[~2016-12-22 13:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-08 13:59 [dpdk-dev] [PATCH] " Ferruh Yigit
2016-12-22 11:18 ` Thomas Monjalon
2016-12-22 11:53 ` [dpdk-dev] [PATCH v2] " Ferruh Yigit
2016-12-22 12:46 ` Thomas Monjalon
2016-12-22 13:10 ` Ferruh Yigit [this message]
2016-12-22 15:00 ` [dpdk-dev] [PATCH v3] " Thomas Monjalon
2016-12-22 15:10 ` Jan Blunck
2016-12-22 15:16 ` Ferruh Yigit
2016-12-22 15:28 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161222131013.28516-1-ferruh.yigit@intel.com \
--to=ferruh.yigit@intel.com \
--cc=dev@dpdk.org \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).