[dpdk-dev] [PATCH v2 00/15] next-eventdev: event/sw software eventdev

[dpdk-dev] [PATCH v2 00/15] next-eventdev: event/sw software eventdev

[Harry van Haaren]

The following patchset adds software eventdev implementation
to the next-eventdev tree.

This implementation is based on the previous software eventdev
v1 patchset, now with comments addressed:
1) xstats api return values changed to be consistent
2) xstats api [out] added to appropriate values
3) xstats api now uses xxx_get() for consistency
4) patch names for check-log.sh
5) checkpatch issues resolved (where it makes sense to, there are
   certain places where fixing checkpatch makes the code less readable.
   These checkpatch warnings will still show up - I see no alternative)

In addition, the following improvements have been made to the patchset:
1) Adds test to run automatically with make test
2) Rework the sw implementation event credit scheme

The first two patches make changes to the eventdev API,
then the software implementation is added, and finally
tests are added for the sw eventdev implementation.

This patchset contains the work of multiple developers,
please see signoffs on each patch.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>


Bruce Richardson (15):
  eventdev: remove unneeded dependencies
  eventdev: add APIs for extended stats
  event/sw: add new software-only eventdev driver
  event/sw: add device capabilities function
  event/sw: add configure function
  event/sw: add fns to return default port/queue config
  event/sw: add support for event queues
  event/sw: add support for event ports
  event/sw: add support for linking queues to ports
  event/sw: add worker core functions
  event/sw: add scheduling logic
  event/sw: add start stop and close functions
  event/sw: add dump function for easier debugging
  event/sw: add xstats support
  app/test: add unit tests for SW eventdev driver

 app/test/Makefile                             |    5 +-
 app/test/autotest_data.py                     |   26 +
 app/test/test_sw_eventdev.c                   | 2071 +++++++++++++++++++++++++
 config/common_base                            |    5 +
 drivers/event/Makefile                        |    1 +
 drivers/event/sw/Makefile                     |   69 +
 drivers/event/sw/event_ring.h                 |  179 +++
 drivers/event/sw/iq_ring.h                    |  176 +++
 drivers/event/sw/rte_pmd_evdev_sw_version.map |    3 +
 drivers/event/sw/sw_evdev.c                   |  754 +++++++++
 drivers/event/sw/sw_evdev.h                   |  291 ++++
 drivers/event/sw/sw_evdev_scheduler.c         |  602 +++++++
 drivers/event/sw/sw_evdev_worker.c            |  186 +++
 drivers/event/sw/sw_evdev_xstats.c            |  404 +++++
 lib/librte_eventdev/Makefile                  |    1 -
 lib/librte_eventdev/rte_eventdev.c            |   63 +
 lib/librte_eventdev/rte_eventdev.h            |   85 +-
 lib/librte_eventdev/rte_eventdev_pmd.h        |   60 +
 lib/librte_eventdev/rte_eventdev_version.map  |    3 +
 mk/rte.app.mk                                 |    1 +
 20 files changed, 4981 insertions(+), 4 deletions(-)
 create mode 100644 app/test/test_sw_eventdev.c
 create mode 100644 drivers/event/sw/Makefile
 create mode 100644 drivers/event/sw/event_ring.h
 create mode 100644 drivers/event/sw/iq_ring.h
 create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
 create mode 100644 drivers/event/sw/sw_evdev.c
 create mode 100644 drivers/event/sw/sw_evdev.h
 create mode 100644 drivers/event/sw/sw_evdev_scheduler.c
 create mode 100644 drivers/event/sw/sw_evdev_worker.c
 create mode 100644 drivers/event/sw/sw_evdev_xstats.c

-- 
2.7.4

[dpdk-dev] [PATCH v2 01/15] eventdev: remove unneeded dependencies

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Since eventdev uses event structures rather than working directly on
mbufs, there is no actual dependencies on the mbuf library. The
inclusion of an mbuf pointer element inside the event itself does not
require the inclusion of the mbuf header file. Similarly the pci
header is not needed, but following their removal, rte_memory.h is
needed for the definition of the __rte_cache_aligned macro.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 lib/librte_eventdev/Makefile       | 1 -
 lib/librte_eventdev/rte_eventdev.h | 5 +++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/lib/librte_eventdev/Makefile b/lib/librte_eventdev/Makefile
index dac0663..396e5ec 100644
--- a/lib/librte_eventdev/Makefile
+++ b/lib/librte_eventdev/Makefile
@@ -52,6 +52,5 @@ EXPORT_MAP := rte_eventdev_version.map
 
 # library dependencies
 DEPDIRS-y += lib/librte_eal
-DEPDIRS-y += lib/librte_mbuf
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index e1bd05f..c2f9310 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -244,8 +244,9 @@ extern "C" {
 #endif
 
 #include <rte_common.h>
-#include <rte_pci.h>
-#include <rte_mbuf.h>
+#include <rte_memory.h>
+
+struct rte_mbuf; /* we just use mbuf pointers; no need to include rte_mbuf.h */
 
 /* Event device capability bitmap flags */
 #define RTE_EVENT_DEV_CAP_QUEUE_QOS           (1ULL << 0)
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2 01/15] eventdev: remove unneeded dependencies

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:19PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Since eventdev uses event structures rather than working directly on
> mbufs, there is no actual dependencies on the mbuf library. The
> inclusion of an mbuf pointer element inside the event itself does not
> require the inclusion of the mbuf header file. Similarly the pci
> header is not needed, but following their removal, rte_memory.h is
> needed for the definition of the __rte_cache_aligned macro.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

> ---

Re: [dpdk-dev] [PATCH v2 01/15] eventdev: remove unneeded dependencies

[Jerin Jacob]

On Mon, Feb 06, 2017 at 01:42:33PM +0530, Jerin Jacob wrote:
> On Tue, Jan 31, 2017 at 04:14:19PM +0000, Harry van Haaren wrote:
> > From: Bruce Richardson <bruce.richardson@intel.com>
> > 
> > Since eventdev uses event structures rather than working directly on
> > mbufs, there is no actual dependencies on the mbuf library. The
> > inclusion of an mbuf pointer element inside the event itself does not
> > require the inclusion of the mbuf header file. Similarly the pci
> > header is not needed, but following their removal, rte_memory.h is
> > needed for the definition of the __rte_cache_aligned macro.
> > 
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> 
> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

Applied to dpdk-next-eventdev/master. Thanks.

> 
> > ---

[dpdk-dev] [PATCH v2 02/15] eventdev: add APIs for extended stats

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in APIs for extended stats so that eventdev implementations can report
out information on their internal state. The APIs are based on, but not
identical to, the equivalent ethdev functions.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 lib/librte_eventdev/rte_eventdev.c           | 63 ++++++++++++++++++++++
 lib/librte_eventdev/rte_eventdev.h           | 80 ++++++++++++++++++++++++++++
 lib/librte_eventdev/rte_eventdev_pmd.h       | 60 +++++++++++++++++++++
 lib/librte_eventdev/rte_eventdev_version.map |  3 ++
 4 files changed, 206 insertions(+)

diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
index c8f3e94..95572f4 100644
--- a/lib/librte_eventdev/rte_eventdev.c
+++ b/lib/librte_eventdev/rte_eventdev.c
@@ -920,6 +920,69 @@ rte_event_dev_dump(uint8_t dev_id, FILE *f)
 
 }
 
+static int
+get_xstats_count(uint8_t dev_id)
+{
+	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+	if (dev->dev_ops->get_xstat_names != NULL)
+		return (*dev->dev_ops->get_xstat_names)(dev, NULL, 0);
+	return 0;
+}
+
+int
+rte_event_dev_xstats_names_get(uint8_t dev_id,
+	struct rte_event_dev_xstat_name *xstats_names,
+	unsigned int size)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	const int cnt_expected_entries = get_xstats_count(dev_id);
+	if (xstats_names == NULL || cnt_expected_entries < 0 ||
+			(int)size < cnt_expected_entries)
+		return cnt_expected_entries;
+
+	/* dev_id checked above */
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+	if (dev->dev_ops->get_xstat_names != NULL)
+		return (*dev->dev_ops->get_xstat_names)(dev,
+				xstats_names, size);
+
+	return -ENOTSUP;
+}
+
+/* retrieve eventdev extended statistics */
+int
+rte_event_dev_xstats_get(uint8_t dev_id, const unsigned int ids[],
+	uint64_t values[], unsigned int n)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+	/* implemented by the driver */
+	if (dev->dev_ops->get_xstats != NULL)
+		return (*dev->dev_ops->get_xstats)(dev, ids, values, n);
+	return -ENOTSUP;
+}
+
+uint64_t
+rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+		unsigned int *id)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, 0);
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+	unsigned int temp = -1;
+
+	if (id != NULL)
+		*id = (unsigned int)-1;
+	else
+		id = &temp; /* ensure driver never gets a NULL value */
+
+	/* implemented by driver */
+	if (dev->dev_ops->get_xstat_by_name != NULL)
+		return (*dev->dev_ops->get_xstat_by_name)(dev, name, id);
+	return -ENOTSUP;
+}
+
 int
 rte_event_dev_start(uint8_t dev_id)
 {
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index c2f9310..66fc35a 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -1401,6 +1401,86 @@ rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
 int
 rte_event_dev_dump(uint8_t dev_id, FILE *f);
 
+/** Maximum name length for extended statistics counters */
+#define RTE_EVENT_DEV_XSTAT_NAME_SIZE 64
+
+/**
+ * A name-key lookup element for extended statistics.
+ *
+ * This structure is used to map between names and ID numbers
+ * for extended ethdev statistics.
+ */
+struct rte_event_dev_xstat_name {
+	char name[RTE_EVENT_DEV_XSTAT_NAME_SIZE];
+};
+
+/**
+ * Retrieve names of extended statistics of an event device.
+ *
+ * @param dev_id
+ *   The identifier of the event device.
+ * @param[out] xstat_names
+ *  Block of memory to insert names into. Must be at least size in capacity.
+ *  If set to NULL, function returns required capacity.
+ * @param size
+ *  Capacity of xstat_names (number of names).
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   - negative value on error. -EINVAL for invalid dev id, -ENOTSUP if the
+ *     device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_names_get(uint8_t dev_id,
+			       struct rte_event_dev_xstat_name *xstat_names,
+			       unsigned int size);
+
+/**
+ * Retrieve extended statistics of an event device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param ids
+ *   The id numbers of the stats to get. The ids can be got from the stat
+ *   position in the stat list from rte_event_dev_get_xstat_names(), or
+ *   by using rte_eventdev_get_xstat_by_name()
+ * @param[out] values
+ *   The values for each stats request by ID.
+ * @param n
+ *   The number of stats requested
+ * @return
+ *   - positive value: number of stat entries filled into the values array
+ *   - negative value on error. -EINVAL for invalid dev id, -ENOTSUP if the
+ *     device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_get(uint8_t dev_id, const unsigned int ids[],
+			 uint64_t values[], unsigned int n);
+
+/**
+ * Retrieve the value of a single stat by requesting it by name.
+ *
+ * @param dev_id
+ *   The identifier of the device
+ * @param name
+ *   The stat name to retrieve
+ * @param[out] id
+ *   If non-NULL, the numerical id of the stat will be returned, so that further
+ *   requests for the stat can be got using rte_eventdev_xstats_get, which will
+ *   be faster as it doesn't need to scan a list of names for the stat.
+ *   If the stat cannot be found, the id returned will be (unsigned)-1.
+ * @return
+ *   - positive value or zero: the stat value
+ *   - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
+ */
+uint64_t
+rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+				 unsigned int *id);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
index c84c9a2..15843c6 100644
--- a/lib/librte_eventdev/rte_eventdev_pmd.h
+++ b/lib/librte_eventdev/rte_eventdev_pmd.h
@@ -418,6 +418,59 @@ typedef void (*eventdev_dequeue_timeout_ticks_t)(struct rte_eventdev *dev,
  */
 typedef void (*eventdev_dump_t)(struct rte_eventdev *dev, FILE *f);
 
+/**
+ * Retrieve a set of statistics from device
+ *
+ * @param dev
+ *   Event device pointer
+ * @param ids
+ *   The stat ids to retrieve
+ * @param values
+ *   The returned stat values
+ * @param n
+ *   The number of id values and entries in the values array
+ * @return
+ *   The number of stat values successfully filled into the values array
+ */
+typedef int (*eventdev_get_xstats_t)(const struct rte_eventdev *dev,
+	const unsigned int ids[], uint64_t values[], unsigned int n);
+
+/**
+ * Get names of extended stats of an event device
+ *
+ * @param dev
+ *   Event device pointer
+ * @param xstat_names
+ *   Array of name values to be filled in
+ * @param size
+ *   Number of values in the xstat_names array
+ * @return
+ *   When size >= the number of stats, return the number of stat values filled
+ *   into the array.
+ *   When size < the number of available stats, return the number of stats
+ *   values, and do not fill in any data into xstat_names.
+ */
+typedef int (*eventdev_get_xstat_names_t)(const struct rte_eventdev *dev,
+	struct rte_event_dev_xstat_name *xstat_names, unsigned int size);
+
+/**
+ * Get value of one stats and optionally return its id
+ *
+ * @param dev
+ *   Event device pointer
+ * @param name
+ *   The name of the stat to retrieve
+ * @param id
+ *   Pointer to an unsigned int where we store the stat-id for future reference.
+ *   This pointer may be null if the id is not required.
+ * @return
+ *   The value of the stat, or (uint64_t)-1 if the stat is not found.
+ *   If the stat is not found, the id value will be returned as (unsigned)-1,
+ *   if id pointer is non-NULL
+ */
+typedef uint64_t (*eventdev_get_xstat_by_name)(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id);
+
 /** Event device operations function pointer table */
 struct rte_eventdev_ops {
 	eventdev_info_get_t dev_infos_get;	/**< Get device info. */
@@ -448,6 +501,13 @@ struct rte_eventdev_ops {
 	/**< Converts ns to *timeout_ticks* value for rte_event_dequeue() */
 	eventdev_dump_t dump;
 	/* Dump internal information */
+
+	eventdev_get_xstats_t get_xstats;
+	/**< Get extended device statistics. */
+	eventdev_get_xstat_names_t get_xstat_names;
+	/**< Get names of extended stats. */
+	eventdev_get_xstat_by_name get_xstat_by_name;
+	/**< Get one value by name */
 };
 
 /**
diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/rte_eventdev_version.map
index 68b8c81..b138eb3 100644
--- a/lib/librte_eventdev/rte_eventdev_version.map
+++ b/lib/librte_eventdev/rte_eventdev_version.map
@@ -12,6 +12,9 @@ DPDK_17.02 {
 	rte_event_dev_stop;
 	rte_event_dev_close;
 	rte_event_dev_dump;
+	rte_event_dev_get_xstats;
+	rte_event_dev_get_xstat_names;
+	rte_event_dev_get_xstat_by_name;
 
 	rte_event_port_default_conf_get;
 	rte_event_port_setup;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2 02/15] eventdev: add APIs for extended stats

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:20PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add in APIs for extended stats so that eventdev implementations can report
> out information on their internal state. The APIs are based on, but not
> identical to, the equivalent ethdev functions.

The APIs Looks good. One minor comment though,

Can you add statistics specific to per event queue and event
port?, To improve the cases like below in the application code(taken from
app/test/test_sw_eventdev.c).

IMO, it is useful because,
- ethdev has similar semantics
- majority of the implementations will have port and queue specific statistics counters

+       for (i = 0; i < MAX_PORTS; i++) {
+               char name[32];
+               snprintf(name, sizeof(name), "port_%u_rx", i);
+               stats->port_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+                               dev_id, name, &port_rx_pkts_ids[i]);

+       for (i = 0; i < MAX_QIDS; i++) {
+               char name[32];
+               snprintf(name, sizeof(name), "qid_%u_rx", i);
+               stats->qid_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+                               dev_id, name, &qid_rx_pkts_ids[i]);

Re: [dpdk-dev] [PATCH v2 02/15] eventdev: add APIs for extended stats

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Monday, February 6, 2017 8:23 AM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> Subject: Re: [PATCH v2 02/15] eventdev: add APIs for extended stats
> 
> On Tue, Jan 31, 2017 at 04:14:20PM +0000, Harry van Haaren wrote:
> > From: Bruce Richardson <bruce.richardson@intel.com>
> >
> > Add in APIs for extended stats so that eventdev implementations can report
> > out information on their internal state. The APIs are based on, but not
> > identical to, the equivalent ethdev functions.
> 
> The APIs Looks good. One minor comment though,
> 
> Can you add statistics specific to per event queue and event
> port?, To improve the cases like below in the application code(taken from
> app/test/test_sw_eventdev.c).
> 
> IMO, it is useful because,
> - ethdev has similar semantics
> - majority of the implementations will have port and queue specific statistics counters

I'm not totally sure what you're asking but if I understand correctly, you're suggesting a struct based stats API like this?

struct rte_event_dev_port_stats {
    uint64_t rx;
    uint64_t tx;
    ...
};

struct rte_event_dev_queue_stats {
    uint64_t rx;
    uint64_t tx;
    ...
};

/** a get function to get a specific port's statistics. The *stats* pointer is filled in */ 
int rte_event_dev_port_stats_get(dev, uint8_t port_id, struct rte_event_dev_port_stats *stats);

/** a get function to get a specific queue's statistics. The *stats* pointer is filled in */ 
int rte_event_dev_queue_stats_get(dev, uint8_t queue_id, struct rte_event_dev_queue_stats *stats);


Is this what you meant, or did I misunderstand?


> 
> +       for (i = 0; i < MAX_PORTS; i++) {
> +               char name[32];
> +               snprintf(name, sizeof(name), "port_%u_rx", i);
> +               stats->port_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
> +                               dev_id, name, &port_rx_pkts_ids[i]);
> 
> +       for (i = 0; i < MAX_QIDS; i++) {
> +               char name[32];
> +               snprintf(name, sizeof(name), "qid_%u_rx", i);
> +               stats->qid_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
> +                               dev_id, name, &qid_rx_pkts_ids[i]);
> 

Re: [dpdk-dev] [PATCH v2 02/15] eventdev: add APIs for extended stats

[Jerin Jacob]

On Mon, Feb 06, 2017 at 10:37:31AM +0000, Van Haaren, Harry wrote:
> > -----Original Message-----
> > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > Sent: Monday, February 6, 2017 8:23 AM
> > To: Van Haaren, Harry <harry.van.haaren@intel.com>
> > Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> > Subject: Re: [PATCH v2 02/15] eventdev: add APIs for extended stats
> > 
> > On Tue, Jan 31, 2017 at 04:14:20PM +0000, Harry van Haaren wrote:
> > > From: Bruce Richardson <bruce.richardson@intel.com>
> > >
> > > Add in APIs for extended stats so that eventdev implementations can report
> > > out information on their internal state. The APIs are based on, but not
> > > identical to, the equivalent ethdev functions.
> > 
> > The APIs Looks good. One minor comment though,

One more suggestion,

How about adding the reset function for resetting the selective xstat counters similar to
ethdev? IMO, It will be useful.

> > 
> > Can you add statistics specific to per event queue and event
> > port?, To improve the cases like below in the application code(taken from
> > app/test/test_sw_eventdev.c).
> > 
> > IMO, it is useful because,
> > - ethdev has similar semantics
> > - majority of the implementations will have port and queue specific statistics counters
> 
> I'm not totally sure what you're asking but if I understand correctly, you're suggesting a struct based stats API like this?
> 
> struct rte_event_dev_port_stats {
>     uint64_t rx;
>     uint64_t tx;
>     ...
> };
> 
> struct rte_event_dev_queue_stats {
>     uint64_t rx;
>     uint64_t tx;
>     ...
> };
> 
> /** a get function to get a specific port's statistics. The *stats* pointer is filled in */ 
> int rte_event_dev_port_stats_get(dev, uint8_t port_id, struct rte_event_dev_port_stats *stats);
> 
> /** a get function to get a specific queue's statistics. The *stats* pointer is filled in */ 
> int rte_event_dev_queue_stats_get(dev, uint8_t queue_id, struct rte_event_dev_queue_stats *stats);
> 
> 
> Is this what you meant, or did I misunderstand?

I meant, queue and port specific "xstat" as each implementation may
have different statistics counters for queue/port.

Just to share my view, I have modified the exiting proposal.
Thoughts?

+enum rte_event_dev_xstats_mode {
+       RTE_EVENT_DEV_XSTAT_DEVICE; /* Event device specific global xstats */
+       RTE_EVENT_DEV_XSTAT_QUEUE; /* Event queue specific xstats */
+       RTE_EVENT_DEV_XSTAT_PORT; /* Event port specific xstats */
+};
+
 /**
  * Retrieve names of extended statistics of an event device.
  *
@@ -1436,9 +1442,11 @@ struct rte_event_dev_xstat_name {
  */
 int
 rte_event_dev_xstats_names_get(uint8_t dev_id,
+                              enum rte_event_dev_xstats_mode mode;
                               struct rte_event_dev_xstat_name *xstat_names,
                               unsigned int size);

 /**
  * Retrieve extended statistics of an event device.
  *
@@ -1458,7 +1466,10 @@ rte_event_dev_xstats_names_get(uint8_t dev_id,
  *     device doesn't support this function.
  */
 int
-rte_event_dev_xstats_get(uint8_t dev_id, const unsigned int ids[],
+rte_event_dev_xstats_get(uint8_t dev_id,
+                        enum rte_event_dev_xstats_mode mode,
+                        uint8_t queue_port_id; /* valid when RTE_EVENT_DEV_XSTAT_QUEUE or RTE_EVENT_DEV_XSTAT_PORT */
+                        const unsigned int ids[],
                         uint64_t values[], unsigned int n);
 
 /**
@@ -1478,7 +1489,9 @@ rte_event_dev_xstats_get(uint8_t dev_id, const
unsigned int ids[],
  *   - negative value: -EINVAL if stat not found, -ENOTSUP if not
  *   supported.
  */
 uint64_t
-rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+rte_event_dev_xstats_by_name_get(uint8_t dev_id,
+                                enum rte_event_dev_xstats_mode mode,
+                                const char *name,
                                 unsigned int *id);
> 
> 
> > 
> > +       for (i = 0; i < MAX_PORTS; i++) {
> > +               char name[32];
> > +               snprintf(name, sizeof(name), "port_%u_rx", i);
> > +               stats->port_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
> > +                               dev_id, name, &port_rx_pkts_ids[i]);
> > 
> > +       for (i = 0; i < MAX_QIDS; i++) {
> > +               char name[32];
> > +               snprintf(name, sizeof(name), "qid_%u_rx", i);
> > +               stats->qid_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
> > +                               dev_id, name, &qid_rx_pkts_ids[i]);
> > 
> 

Re: [dpdk-dev] [PATCH v2 02/15] eventdev: add APIs for extended stats

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Tuesday, February 7, 2017 6:25 AM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> Subject: Re: [PATCH v2 02/15] eventdev: add APIs for extended stats

<snip>

> How about adding the reset function for resetting the selective xstat counters similar to
> ethdev? IMO, It will be useful.


Agreed, an ethdev like xstats_reset() is useful - will add it.


> > > Can you add statistics specific to per event queue and event
> > > port?, To improve the cases like below in the application code(taken from
> > > app/test/test_sw_eventdev.c).
> > >
> > > IMO, it is useful because,
> > > - ethdev has similar semantics
> > > - majority of the implementations will have port and queue specific statistics counters
> >
> > I'm not totally sure what you're asking but if I understand correctly, you're suggesting a
> struct based stats API like this?
> >
> > struct rte_event_dev_port_stats {
> >     uint64_t rx;
> >     uint64_t tx;
> >     ...
> > };
> >
> > struct rte_event_dev_queue_stats {
> >     uint64_t rx;
> >     uint64_t tx;
> >     ...
> > };
> >
> > /** a get function to get a specific port's statistics. The *stats* pointer is filled in */
> > int rte_event_dev_port_stats_get(dev, uint8_t port_id, struct rte_event_dev_port_stats
> *stats);
> >
> > /** a get function to get a specific queue's statistics. The *stats* pointer is filled in */
> > int rte_event_dev_queue_stats_get(dev, uint8_t queue_id, struct rte_event_dev_queue_stats
> *stats);
> >
> >
> > Is this what you meant, or did I misunderstand?
> 
> I meant, queue and port specific "xstat" as each implementation may
> have different statistics counters for queue/port.
> 
> Just to share my view, I have modified the exiting proposal.
> Thoughts?


That seems reasonable to me, thanks for the sample code - 1/2 the work done ;)
Will include in v3.


> +enum rte_event_dev_xstats_mode {
> +       RTE_EVENT_DEV_XSTAT_DEVICE; /* Event device specific global xstats */
> +       RTE_EVENT_DEV_XSTAT_QUEUE; /* Event queue specific xstats */
> +       RTE_EVENT_DEV_XSTAT_PORT; /* Event port specific xstats */
> +};
> +
>  /**
>   * Retrieve names of extended statistics of an event device.
>   *
> @@ -1436,9 +1442,11 @@ struct rte_event_dev_xstat_name {
>   */
>  int
>  rte_event_dev_xstats_names_get(uint8_t dev_id,
> +                              enum rte_event_dev_xstats_mode mode;
>                                struct rte_event_dev_xstat_name *xstat_names,
>                                unsigned int size);
> 
>  /**
>   * Retrieve extended statistics of an event device.
>   *
> @@ -1458,7 +1466,10 @@ rte_event_dev_xstats_names_get(uint8_t dev_id,
>   *     device doesn't support this function.
>   */
>  int
> -rte_event_dev_xstats_get(uint8_t dev_id, const unsigned int ids[],
> +rte_event_dev_xstats_get(uint8_t dev_id,
> +                        enum rte_event_dev_xstats_mode mode,
> +                        uint8_t queue_port_id; /* valid when RTE_EVENT_DEV_XSTAT_QUEUE or
> RTE_EVENT_DEV_XSTAT_PORT */
> +                        const unsigned int ids[],
>                          uint64_t values[], unsigned int n);
> 
>  /**
> @@ -1478,7 +1489,9 @@ rte_event_dev_xstats_get(uint8_t dev_id, const
> unsigned int ids[],
>   *   - negative value: -EINVAL if stat not found, -ENOTSUP if not
>   *   supported.
>   */
>  uint64_t
> -rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
> +rte_event_dev_xstats_by_name_get(uint8_t dev_id,
> +                                enum rte_event_dev_xstats_mode mode,
> +                                const char *name,
>                                  unsigned int *id);
> >
> >
> > >
> > > +       for (i = 0; i < MAX_PORTS; i++) {
> > > +               char name[32];
> > > +               snprintf(name, sizeof(name), "port_%u_rx", i);
> > > +               stats->port_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
> > > +                               dev_id, name, &port_rx_pkts_ids[i]);
> > >
> > > +       for (i = 0; i < MAX_QIDS; i++) {
> > > +               char name[32];
> > > +               snprintf(name, sizeof(name), "qid_%u_rx", i);
> > > +               stats->qid_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
> > > +                               dev_id, name, &qid_rx_pkts_ids[i]);
> > >
> >

[dpdk-dev] [PATCH v2 03/15] event/sw: add new software-only eventdev driver

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

This adds the minimal changes to allow a SW eventdev implementation to
be compiled, linked and created at run time. The eventdev does nothing,
but can be created via vdev on commandline, e.g.

  sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
  ...
  PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
  RTE>>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 config/common_base                            |   5 +
 drivers/event/Makefile                        |   1 +
 drivers/event/sw/Makefile                     |  66 ++++++++++
 drivers/event/sw/rte_pmd_evdev_sw_version.map |   3 +
 drivers/event/sw/sw_evdev.c                   | 178 ++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.h                   |  63 +++++++++
 mk/rte.app.mk                                 |   1 +
 7 files changed, 317 insertions(+)
 create mode 100644 drivers/event/sw/Makefile
 create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
 create mode 100644 drivers/event/sw/sw_evdev.c
 create mode 100644 drivers/event/sw/sw_evdev.h

diff --git a/config/common_base b/config/common_base
index 00af811..6f91172 100644
--- a/config/common_base
+++ b/config/common_base
@@ -434,6 +434,11 @@ CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
 
 #
+# Compile PMD for software event device
+#
+CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
+
+#
 # Compile librte_ring
 #
 CONFIG_RTE_LIBRTE_RING=y
diff --git a/drivers/event/Makefile b/drivers/event/Makefile
index 678279f..353441c 100644
--- a/drivers/event/Makefile
+++ b/drivers/event/Makefile
@@ -32,5 +32,6 @@
 include $(RTE_SDK)/mk/rte.vars.mk
 
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += skeleton
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw
 
 include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
new file mode 100644
index 0000000..d6836e3
--- /dev/null
+++ b/drivers/event/sw/Makefile
@@ -0,0 +1,66 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+
+# library name
+LIB = librte_pmd_sw_event.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+# for older GCC versions, allow us to initialize an event using
+# designated initializers.
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+ifeq ($(shell test $(GCC_VERSION) -le 50 && echo 1), 1)
+CFLAGS += -Wno-missing-field-initializers
+endif
+endif
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_evdev_sw_version.map
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
+
+# export include files
+SYMLINK-y-include +=
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eventdev
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_ring
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/event/sw/rte_pmd_evdev_sw_version.map b/drivers/event/sw/rte_pmd_evdev_sw_version.map
new file mode 100644
index 0000000..1f84b68
--- /dev/null
+++ b/drivers/event/sw/rte_pmd_evdev_sw_version.map
@@ -0,0 +1,3 @@
+DPDK_17.02 {
+	local: *;
+};
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
new file mode 100644
index 0000000..d60f00f
--- /dev/null
+++ b/drivers/event/sw/sw_evdev.c
@@ -0,0 +1,178 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_vdev.h>
+#include <rte_memzone.h>
+#include <rte_kvargs.h>
+#include <rte_ring.h>
+
+#include "sw_evdev.h"
+
+#define EVENTDEV_NAME_SW_PMD event_sw
+#define NUMA_NODE_ARG "numa_node"
+#define SCHED_QUANTA_ARG "sched_quanta"
+#define CREDIT_QUANTA_ARG "credit_quanta"
+
+static int
+assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *socket_id = opaque;
+	*socket_id = atoi(value);
+	if (*socket_id > RTE_MAX_NUMA_NODES)
+		return -1;
+	return 0;
+}
+
+static int
+set_sched_quanta(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *quanta = opaque;
+	*quanta = atoi(value);
+	if (*quanta < 0 || *quanta > 4096)
+		return -1;
+	return 0;
+}
+
+static int
+set_credit_quanta(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *credit = opaque;
+	*credit = atoi(value);
+	if (*credit < 0 || *credit > 128)
+		return -1;
+	return 0;
+}
+
+static int
+sw_probe(const char *name, const char *params)
+{
+	static const struct rte_eventdev_ops evdev_sw_ops = {
+	};
+
+	static const char *const args[] = {
+		NUMA_NODE_ARG,
+		SCHED_QUANTA_ARG,
+		CREDIT_QUANTA_ARG,
+		NULL
+	};
+	struct rte_eventdev *dev;
+	struct sw_evdev *sw;
+	int socket_id = rte_socket_id();
+	int sched_quanta  = SW_DEFAULT_SCHED_QUANTA;
+	int credit_quanta = SW_DEFAULT_CREDIT_QUANTA;
+
+	if (params != NULL && params[0] != '\0') {
+		struct rte_kvargs *kvlist = rte_kvargs_parse(params, args);
+
+		if (!kvlist) {
+			RTE_LOG(INFO, PMD,
+				"Ignoring unsupported parameters when creating device '%s'\n",
+				name);
+		} else {
+			int ret = rte_kvargs_process(kvlist, NUMA_NODE_ARG,
+					assign_numa_node, &socket_id);
+			if (ret != 0) {
+				RTE_LOG(ERR, PMD,
+					"%s: Error parsing numa node parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			ret = rte_kvargs_process(kvlist, SCHED_QUANTA_ARG,
+					set_sched_quanta, &sched_quanta);
+			if (ret != 0) {
+				RTE_LOG(ERR, PMD,
+					"%s: Error parsing sched quanta parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			ret = rte_kvargs_process(kvlist, CREDIT_QUANTA_ARG,
+					set_credit_quanta, &credit_quanta);
+			if (ret != 0) {
+				RTE_LOG(ERR, PMD,
+					"%s: Error parsing credit quanta parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			rte_kvargs_free(kvlist);
+		}
+	}
+
+	RTE_LOG(INFO, PMD,
+			"Creating eventdev sw device %s, numa_node=%d, sched_quanta=%d, credit_quanta=%d\n",
+			name, socket_id, sched_quanta, credit_quanta);
+
+	dev = rte_event_pmd_vdev_init(name,
+			sizeof(struct sw_evdev), socket_id);
+	if (dev == NULL) {
+		printf("eventdev vdev init() failed");
+		return -EFAULT;
+	}
+	dev->dev_ops = &evdev_sw_ops;
+
+	sw = dev->data->dev_private;
+	sw->data = dev->data;
+
+	/* copy values passed from vdev command line to instance */
+	sw->credit_update_quanta = credit_quanta;
+	sw->sched_quanta = sched_quanta;
+
+	return 0;
+}
+
+static int
+sw_remove(const char *name)
+{
+	if (name == NULL)
+		return -EINVAL;
+
+	RTE_LOG(INFO, PMD, "Closing eventdev sw device %s\n", name);
+	/* TODO unregister eventdev and release memzone */
+
+	return 0;
+}
+
+static struct rte_vdev_driver evdev_sw_pmd_drv = {
+	.probe = sw_probe,
+	.remove = sw_remove
+};
+
+RTE_PMD_REGISTER_VDEV(EVENTDEV_NAME_SW_PMD, evdev_sw_pmd_drv);
+RTE_PMD_REGISTER_PARAM_STRING(event_sw, NUMA_NODE_ARG "=<int> "
+		SCHED_QUANTA_ARG "=<int>" CREDIT_QUANTA_ARG "=<int>");
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
new file mode 100644
index 0000000..9494659
--- /dev/null
+++ b/drivers/event/sw/sw_evdev.h
@@ -0,0 +1,63 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SW_EVDEV_H_
+#define _SW_EVDEV_H_
+
+#include <rte_eventdev.h>
+#include <rte_eventdev_pmd.h>
+
+#define SW_DEFAULT_CREDIT_QUANTA 32
+#define SW_DEFAULT_SCHED_QUANTA 128
+
+struct sw_evdev {
+	struct rte_eventdev_data *data;
+
+	int32_t sched_quanta;
+	uint32_t credit_update_quanta;
+};
+
+static inline struct sw_evdev *
+sw_pmd_priv(const struct rte_eventdev *eventdev)
+{
+	return eventdev->data->dev_private;
+}
+
+static inline const struct sw_evdev *
+sw_pmd_priv_const(const struct rte_eventdev *eventdev)
+{
+	return eventdev->data->dev_private;
+}
+
+extern int sched_quanta;
+
+#endif /* _SW_EVDEV_H_ */
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 8341c13..8dc0f9f 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -150,6 +150,7 @@ endif # CONFIG_RTE_LIBRTE_CRYPTODEV
 
 ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += -lrte_pmd_skeleton_event
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += -lrte_pmd_sw_event
 endif # CONFIG_RTE_LIBRTE_EVENTDEV
 
 endif # !CONFIG_RTE_BUILD_SHARED_LIBS
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2 03/15] event/sw: add new software-only eventdev driver

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:21PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> This adds the minimal changes to allow a SW eventdev implementation to
> be compiled, linked and created at run time. The eventdev does nothing,
> but can be created via vdev on commandline, e.g.
> 
>   sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
>   ...
>   PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
>   RTE>>

Like other PMDs, I think, we need to add PMD specific documentation at
doc/guides/eventdevs/sw.rst?

reference:
http://dpdk.org/browse/next/dpdk-next-crypto/tree/doc/guides/cryptodevs/zuc.rst

> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> +# library dependencies
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eal
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eventdev
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_kvargs
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_ring
> +
> +include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/drivers/event/sw/rte_pmd_evdev_sw_version.map b/drivers/event/sw/rte_pmd_evdev_sw_version.map
> new file mode 100644
> index 0000000..1f84b68
> --- /dev/null
> +++ b/drivers/event/sw/rte_pmd_evdev_sw_version.map
> @@ -0,0 +1,3 @@
> +DPDK_17.02 {

DPDK_17.05

> +	local: *;
> +};
> diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
> new file mode 100644
> index 0000000..d60f00f
> --- /dev/null
> +++ b/drivers/event/sw/sw_evdev.c
> @@ -0,0 +1,178 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +	}
> +
> +	RTE_LOG(INFO, PMD,
> +			"Creating eventdev sw device %s, numa_node=%d, sched_quanta=%d, credit_quanta=%d\n",
> +			name, socket_id, sched_quanta, credit_quanta);
> +
> +	dev = rte_event_pmd_vdev_init(name,
> +			sizeof(struct sw_evdev), socket_id);
> +	if (dev == NULL) {
> +		printf("eventdev vdev init() failed");

IMO, We need to avoid using printf for error reporting.I guess there are
multiple instance of the same in the patch series.

> +		return -EFAULT;
> +	}
> +	dev->dev_ops = &evdev_sw_ops;
> +
> +	sw = dev->data->dev_private;
> +	sw->data = dev->data;
> +
> +	/* copy values passed from vdev command line to instance */
> +	sw->credit_update_quanta = credit_quanta;
> +	sw->sched_quanta = sched_quanta;
> +
> +	return 0;
> +}
> +
> +static int
> +sw_remove(const char *name)
> +{
> +	if (name == NULL)
> +		return -EINVAL;
> +
> +	RTE_LOG(INFO, PMD, "Closing eventdev sw device %s\n", name);
> +	/* TODO unregister eventdev and release memzone */

I have sent a patch to address this.

> +
> +	return 0;
> +}
> +

[dpdk-dev] [PATCH v2 04/15] event/sw: add device capabilities function

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the info_get function to return details on the queues, flow,
prioritization capabilities, etc. that this device has.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 23 +++++++++++++++++++++++
 drivers/event/sw/sw_evdev.h | 10 ++++++++++
 2 files changed, 33 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index d60f00f..4dca4cf 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,28 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
+{
+	RTE_SET_USED(dev);
+
+	static const struct rte_event_dev_info evdev_sw_info = {
+			.driver_name = PMD_NAME,
+			.max_event_queues = RTE_EVENT_MAX_QUEUES_PER_DEV,
+			.max_event_queue_flows = SW_QID_NUM_FIDS,
+			.max_event_queue_priority_levels = SW_Q_PRIORITY_MAX,
+			.max_event_priority_levels = SW_IQS_MAX,
+			.max_event_ports = SW_PORTS_MAX,
+			.max_event_port_dequeue_depth = MAX_SW_CONS_Q_DEPTH,
+			.max_event_port_enqueue_depth = MAX_SW_PROD_Q_DEPTH,
+			.max_num_events = SW_INFLIGHT_EVENTS_TOTAL,
+			.event_dev_cap = (RTE_EVENT_DEV_CAP_QUEUE_QOS |
+					RTE_EVENT_DEV_CAP_EVENT_QOS),
+	};
+
+	*info = evdev_sw_info;
+}
+
 static int
 assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
 {
@@ -78,6 +100,7 @@ static int
 sw_probe(const char *name, const char *params)
 {
 	static const struct rte_eventdev_ops evdev_sw_ops = {
+			.dev_infos_get = sw_info_get,
 	};
 
 	static const char *const args[] = {
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 9494659..6e3cb36 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -36,8 +36,18 @@
 #include <rte_eventdev.h>
 #include <rte_eventdev_pmd.h>
 
+#define PMD_NAME "event_sw"
+
 #define SW_DEFAULT_CREDIT_QUANTA 32
 #define SW_DEFAULT_SCHED_QUANTA 128
+#define SW_QID_NUM_FIDS 16384
+#define SW_IQS_MAX 4
+#define SW_Q_PRIORITY_MAX 255
+#define SW_PORTS_MAX 64
+#define MAX_SW_CONS_Q_DEPTH 128
+#define SW_INFLIGHT_EVENTS_TOTAL 4096
+/* allow for lots of over-provisioning */
+#define MAX_SW_PROD_Q_DEPTH 4096
 
 struct sw_evdev {
 	struct rte_eventdev_data *data;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2 04/15] event/sw: add device capabilities function

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:22PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add in the info_get function to return details on the queues, flow,
> prioritization capabilities, etc. that this device has.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  drivers/event/sw/sw_evdev.c | 23 +++++++++++++++++++++++
>  drivers/event/sw/sw_evdev.h | 10 ++++++++++
>  2 files changed, 33 insertions(+)
> 
> diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
> index d60f00f..4dca4cf 100644
> --- a/drivers/event/sw/sw_evdev.c
> +++ b/drivers/event/sw/sw_evdev.c
> @@ -44,6 +44,28 @@
>  #define SCHED_QUANTA_ARG "sched_quanta"
>  #define CREDIT_QUANTA_ARG "credit_quanta"
>  
> +static void
> +sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
> +{
> +	RTE_SET_USED(dev);
> +
> +	static const struct rte_event_dev_info evdev_sw_info = {
> +			.driver_name = PMD_NAME,
> +			.max_event_queues = RTE_EVENT_MAX_QUEUES_PER_DEV,
> +			.max_event_queue_flows = SW_QID_NUM_FIDS,
> +			.max_event_queue_priority_levels = SW_Q_PRIORITY_MAX,
> +			.max_event_priority_levels = SW_IQS_MAX,
> +			.max_event_ports = SW_PORTS_MAX,
> +			.max_event_port_dequeue_depth = MAX_SW_CONS_Q_DEPTH,
> +			.max_event_port_enqueue_depth = MAX_SW_PROD_Q_DEPTH,
> +			.max_num_events = SW_INFLIGHT_EVENTS_TOTAL,
> +			.event_dev_cap = (RTE_EVENT_DEV_CAP_QUEUE_QOS |
> +					RTE_EVENT_DEV_CAP_EVENT_QOS),
> +	};
> +
> +	*info = evdev_sw_info;
> +}
> +
>  static int
>  assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
>  {
> @@ -78,6 +100,7 @@ static int
>  sw_probe(const char *name, const char *params)
>  {
>  	static const struct rte_eventdev_ops evdev_sw_ops = {
> +			.dev_infos_get = sw_info_get,
>  	};
>  
>  	static const char *const args[] = {
> diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
> index 9494659..6e3cb36 100644
> --- a/drivers/event/sw/sw_evdev.h
> +++ b/drivers/event/sw/sw_evdev.h
> @@ -36,8 +36,18 @@
>  #include <rte_eventdev.h>
>  #include <rte_eventdev_pmd.h>
>  
> +#define PMD_NAME "event_sw"

Better to add SW_ name space.

> +
>  #define SW_DEFAULT_CREDIT_QUANTA 32
>  #define SW_DEFAULT_SCHED_QUANTA 128
> +#define SW_QID_NUM_FIDS 16384
> +#define SW_IQS_MAX 4
> +#define SW_Q_PRIORITY_MAX 255
> +#define SW_PORTS_MAX 64
> +#define MAX_SW_CONS_Q_DEPTH 128
> +#define SW_INFLIGHT_EVENTS_TOTAL 4096
> +/* allow for lots of over-provisioning */
> +#define MAX_SW_PROD_Q_DEPTH 4096
>  
>  struct sw_evdev {
>  	struct rte_eventdev_data *data;
> -- 
> 2.7.4
> 

[dpdk-dev] [PATCH v2 05/15] event/sw: add configure function

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 15 +++++++++++++++
 drivers/event/sw/sw_evdev.h | 11 +++++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 4dca4cf..b657eb4 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,20 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static int
+sw_dev_configure(const struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	const struct rte_eventdev_data *data = dev->data;
+	const struct rte_event_dev_config *conf = &data->dev_conf;
+
+	sw->qid_count = conf->nb_event_queues;
+	sw->port_count = conf->nb_event_ports;
+	sw->nb_events_limit = conf->nb_events_limit;
+
+	return 0;
+}
+
 static void
 sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 {
@@ -100,6 +114,7 @@ static int
 sw_probe(const char *name, const char *params)
 {
 	static const struct rte_eventdev_ops evdev_sw_ops = {
+			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
 	};
 
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 6e3cb36..65f00e4 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -35,6 +35,7 @@
 
 #include <rte_eventdev.h>
 #include <rte_eventdev_pmd.h>
+#include <rte_atomic.h>
 
 #define PMD_NAME "event_sw"
 
@@ -52,7 +53,17 @@
 struct sw_evdev {
 	struct rte_eventdev_data *data;
 
+	uint32_t port_count;
+	uint32_t qid_count;
+
+	/*
+	 * max events in this instance. Cached here for performance.
+	 * (also available in data->conf.nb_events_limit)
+	 */
+	uint32_t nb_events_limit;
+
 	int32_t sched_quanta;
+
 	uint32_t credit_update_quanta;
 };
 
-- 
2.7.4

[dpdk-dev] [PATCH v2 06/15] event/sw: add fns to return default port/queue config

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index b657eb4..ceca865 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,35 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_queue_def_conf(struct rte_eventdev *dev, uint8_t queue_id,
+				 struct rte_event_queue_conf *conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(queue_id);
+
+	static const struct rte_event_queue_conf default_conf = {
+		.nb_atomic_flows = 4096,
+		.nb_atomic_order_sequences = 1,
+		.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+		.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+	};
+
+	*conf = default_conf;
+}
+
+static void
+sw_port_def_conf(struct rte_eventdev *dev, uint8_t port_id,
+		 struct rte_event_port_conf *port_conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(port_id);
+
+	port_conf->new_event_threshold = 1024;
+	port_conf->dequeue_depth = 16;
+	port_conf->enqueue_depth = 16;
+}
+
 static int
 sw_dev_configure(const struct rte_eventdev *dev)
 {
@@ -116,6 +145,9 @@ sw_probe(const char *name, const char *params)
 	static const struct rte_eventdev_ops evdev_sw_ops = {
 			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
+
+			.queue_def_conf = sw_queue_def_conf,
+			.port_def_conf = sw_port_def_conf,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

[dpdk-dev] [PATCH v2 07/15] event/sw: add support for event queues

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the data structures for the event queues, and the eventdev
functions to create and destroy those queues.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/iq_ring.h  | 176 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.c | 158 +++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.h |  75 +++++++++++++++++++
 3 files changed, 409 insertions(+)
 create mode 100644 drivers/event/sw/iq_ring.h

diff --git a/drivers/event/sw/iq_ring.h b/drivers/event/sw/iq_ring.h
new file mode 100644
index 0000000..d480d15
--- /dev/null
+++ b/drivers/event/sw/iq_ring.h
@@ -0,0 +1,176 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Ring structure definitions used for the internal ring buffers of the
+ * SW eventdev implementation. These are designed for single-core use only.
+ */
+#ifndef _IQ_RING_
+#define _IQ_RING_
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_eventdev.h>
+
+#define IQ_RING_NAMESIZE 12
+#define QID_IQ_DEPTH 512
+#define QID_IQ_MASK (uint16_t)(QID_IQ_DEPTH - 1)
+
+struct iq_ring {
+	char name[IQ_RING_NAMESIZE] __rte_cache_aligned;
+	uint16_t write_idx;
+	uint16_t read_idx;
+
+	struct rte_event ring[QID_IQ_DEPTH];
+};
+
+#ifndef force_inline
+#define force_inline inline __attribute__((always_inline))
+#endif
+
+static inline struct iq_ring *
+iq_ring_create(const char *name, unsigned int socket_id)
+{
+	struct iq_ring *retval;
+
+	retval = rte_malloc_socket(NULL, sizeof(*retval), 0, socket_id);
+	if (retval == NULL)
+		goto end;
+
+	snprintf(retval->name, sizeof(retval->name), "%s", name);
+	retval->write_idx = retval->read_idx = 0;
+end:
+	return retval;
+}
+
+static inline void
+iq_ring_destroy(struct iq_ring *r)
+{
+	rte_free(r);
+}
+
+static force_inline uint16_t
+iq_ring_count(const struct iq_ring *r)
+{
+	return r->write_idx - r->read_idx;
+}
+
+static force_inline uint16_t
+iq_ring_free_count(const struct iq_ring *r)
+{
+	return QID_IQ_MASK - iq_ring_count(r);
+}
+
+static force_inline uint16_t
+iq_ring_enqueue_burst(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	const uint16_t read = r->read_idx;
+	uint16_t write = r->write_idx;
+	const uint16_t space = read + QID_IQ_MASK - write;
+	uint16_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++)
+		r->ring[write & QID_IQ_MASK] = qes[i];
+
+	r->write_idx = write;
+
+	return nb_qes;
+}
+
+static force_inline uint16_t
+iq_ring_dequeue_burst(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	uint16_t read = r->read_idx;
+	const uint16_t write = r->write_idx;
+	const uint16_t items = write - read;
+	uint16_t i;
+
+	for (i = 0; i < nb_qes; i++, read++)
+		qes[i] = r->ring[read & QID_IQ_MASK];
+
+	if (items < nb_qes)
+		nb_qes = items;
+
+	r->read_idx += nb_qes;
+
+	return nb_qes;
+}
+
+/* assumes there is space, from a previous dequeue_burst */
+static force_inline uint16_t
+iq_ring_put_back(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	uint16_t i, read = r->read_idx;
+
+	for (i = nb_qes; i-- > 0; )
+		r->ring[--read & QID_IQ_MASK] = qes[i];
+
+	r->read_idx = read;
+	return nb_qes;
+}
+
+static force_inline const struct rte_event *
+iq_ring_peek(const struct iq_ring *r)
+{
+	return &r->ring[r->read_idx & QID_IQ_MASK];
+}
+
+static force_inline void
+iq_ring_pop(struct iq_ring *r)
+{
+	r->read_idx++;
+}
+
+static force_inline int
+iq_ring_enqueue(struct iq_ring *r, const struct rte_event *qe)
+{
+	const uint16_t read = r->read_idx;
+	const uint16_t write = r->write_idx;
+	const uint16_t space = read + QID_IQ_MASK - write;
+
+	if (space == 0)
+		return -1;
+
+	r->ring[write & QID_IQ_MASK] = *qe;
+
+	r->write_idx = write + 1;
+
+	return 0;
+}
+
+#endif
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index ceca865..ec756b8 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -38,12 +38,168 @@
 #include <rte_ring.h>
 
 #include "sw_evdev.h"
+#include "iq_ring.h"
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define NUMA_NODE_ARG "numa_node"
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static int32_t
+qid_init(struct sw_evdev *sw, unsigned int idx, int type,
+		const struct rte_event_queue_conf *queue_conf)
+{
+	unsigned int i;
+	int dev_id = sw->data->dev_id;
+	int socket_id = sw->data->socket_id;
+	char buf[IQ_RING_NAMESIZE];
+	struct sw_qid *qid = &sw->qids[idx];
+
+	for (i = 0; i < SW_IQS_MAX; i++) {
+		snprintf(buf, sizeof(buf), "q_%u_iq_%d", idx, i);
+		qid->iq[i] = iq_ring_create(buf, socket_id);
+		if (!qid->iq[i]) {
+			SW_LOG_DBG("ring create failed");
+			goto cleanup;
+		}
+	}
+
+	/* Initialize the FID structures to no pinning (-1), and zero packets */
+	const struct sw_fid_t fid = {.cq = -1, .pcount = 0};
+	for (i = 0; i < RTE_DIM(qid->fids); i++)
+		qid->fids[i] = fid;
+
+	qid->id = idx;
+	qid->type = type;
+	qid->priority = queue_conf->priority;
+
+	if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+		char ring_name[RTE_RING_NAMESIZE];
+		uint32_t window_size;
+
+		/* rte_ring and window_size_mask require require window_size to
+		 * be a power-of-2.
+		 */
+		window_size = rte_align32pow2(
+				queue_conf->nb_atomic_order_sequences);
+
+		qid->window_size = window_size - 1;
+
+		if (!window_size) {
+			SW_LOG_DBG(
+				"invalid reorder_window_size for ordered queue\n"
+				);
+			goto cleanup;
+		}
+
+		snprintf(buf, sizeof(buf), "sw%d_iq_%d_rob", dev_id, i);
+		qid->reorder_buffer = rte_zmalloc_socket(buf,
+				window_size * sizeof(qid->reorder_buffer[0]),
+				0, socket_id);
+		if (!qid->reorder_buffer) {
+			SW_LOG_DBG("reorder_buffer malloc failed\n");
+			goto cleanup;
+		}
+
+		memset(&qid->reorder_buffer[0],
+		       0,
+		       window_size * sizeof(qid->reorder_buffer[0]));
+
+		snprintf(ring_name, sizeof(ring_name), "sw%d_q%d_freelist",
+				dev_id, idx);
+		qid->reorder_buffer_freelist = rte_ring_create(ring_name,
+				window_size,
+				socket_id,
+				RING_F_SP_ENQ | RING_F_SC_DEQ);
+		if (!qid->reorder_buffer_freelist) {
+			SW_LOG_DBG("freelist ring create failed");
+			goto cleanup;
+		}
+
+		/* Populate the freelist with reorder buffer entries. Enqueue
+		 * 'window_size - 1' entries because the rte_ring holds only
+		 * that many.
+		 */
+		for (i = 0; i < window_size - 1; i++) {
+			if (rte_ring_sp_enqueue(qid->reorder_buffer_freelist,
+						&qid->reorder_buffer[i]) < 0)
+				goto cleanup;
+		}
+
+		qid->reorder_buffer_index = 0;
+		qid->cq_next_tx = 0;
+	}
+
+	return 0;
+
+cleanup:
+	for (i = 0; i < SW_IQS_MAX; i++) {
+		if (qid->iq[i])
+			iq_ring_destroy(qid->iq[i]);
+	}
+
+	if (qid->reorder_buffer) {
+		rte_free(qid->reorder_buffer);
+		qid->reorder_buffer = NULL;
+	}
+
+	if (qid->reorder_buffer_freelist) {
+		rte_ring_free(qid->reorder_buffer_freelist);
+		qid->reorder_buffer_freelist = NULL;
+	}
+
+	return -EINVAL;
+}
+
+static int
+sw_queue_setup(struct rte_eventdev *dev, uint8_t queue_id,
+		const struct rte_event_queue_conf *conf)
+{
+	int type;
+
+	/* TODO: Error check queue types and appropriate values */
+	switch (conf->event_queue_cfg) {
+	case RTE_EVENT_QUEUE_CFG_SINGLE_LINK:
+		type = RTE_SCHED_TYPE_DIRECT;
+		break;
+	case RTE_EVENT_QUEUE_CFG_DEFAULT:
+		/* fallthrough */
+	case RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY:
+		type = RTE_SCHED_TYPE_ATOMIC;
+		break;
+	case RTE_EVENT_QUEUE_CFG_ORDERED_ONLY:
+		type = RTE_SCHED_TYPE_ORDERED;
+		break;
+	case RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY:
+		type = RTE_SCHED_TYPE_PARALLEL;
+		break;
+	default:
+		printf("%s : unknown queue type %d requested\n", __func__,
+				conf->event_queue_cfg);
+		return -1;
+	}
+
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	return qid_init(sw, queue_id, type, conf);
+}
+
+static void
+sw_queue_release(struct rte_eventdev *dev, uint8_t id)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	struct sw_qid *qid = &sw->qids[id];
+	uint32_t i;
+
+	for (i = 0; i < SW_IQS_MAX; i++)
+		iq_ring_destroy(qid->iq[i]);
+
+	if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+		rte_free(qid->reorder_buffer);
+		rte_ring_free(qid->reorder_buffer_freelist);
+	}
+	memset(qid, 0, sizeof(*qid));
+}
+
 static void
 sw_queue_def_conf(struct rte_eventdev *dev, uint8_t queue_id,
 				 struct rte_event_queue_conf *conf)
@@ -147,6 +303,8 @@ sw_probe(const char *name, const char *params)
 			.dev_infos_get = sw_info_get,
 
 			.queue_def_conf = sw_queue_def_conf,
+			.queue_setup = sw_queue_setup,
+			.queue_release = sw_queue_release,
 			.port_def_conf = sw_port_def_conf,
 	};
 
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 65f00e4..aaa8056 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -49,6 +49,78 @@
 #define SW_INFLIGHT_EVENTS_TOTAL 4096
 /* allow for lots of over-provisioning */
 #define MAX_SW_PROD_Q_DEPTH 4096
+#define SW_FRAGMENTS_MAX 16
+
+/* have a new scheduling type for 1:1 queue to port links */
+#define RTE_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
+
+#ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
+#define SW_LOG_INFO(fmt, args...) \
+	RTE_LOG(INFO, PMD, "[%s] %s() line %u: " fmt "\n", \
+			PMD_NAME, \
+			__func__, __LINE__, ## args)
+
+#define SW_LOG_DBG(fmt, args...) \
+	RTE_LOG(DEBUG, PMD, "[%s] %s() line %u: " fmt "\n", \
+			PMD_NAME, \
+			__func__, __LINE__, ## args)
+#else
+#define SW_LOG_INFO(fmt, args...)
+#define SW_LOG_DBG(fmt, args...)
+#endif
+
+/* Records basic event stats at a given point. Used in port and qid structs */
+struct sw_point_stats {
+	uint64_t rx_pkts;
+	uint64_t rx_dropped;
+	uint64_t tx_pkts;
+};
+
+/* structure used to track what port a flow (FID) is pinned to */
+struct sw_fid_t {
+	/* which CQ this FID is currently pinned to */
+	int32_t cq;
+	/* number of packets gone to the CQ with this FID */
+	uint32_t pcount;
+};
+
+struct reorder_buffer_entry {
+	uint16_t num_fragments;		/**< Number of packet fragments */
+	uint16_t fragment_index;	/**< Points to the oldest valid frag */
+	uint8_t ready;			/**< Entry is ready to be reordered */
+	struct rte_event fragments[SW_FRAGMENTS_MAX];
+};
+
+struct sw_qid {
+	/* The type of this QID */
+	int type;
+	/* Integer ID representing the queue. This is used in history lists,
+	 * to identify the stage of processing.
+	 */
+	uint32_t id;
+	struct sw_point_stats stats;
+
+	/* Internal priority rings for packets */
+	struct iq_ring *iq[SW_IQS_MAX];
+	uint32_t iq_pkt_mask; /* A mask to indicate packets in an IQ */
+	uint64_t iq_pkt_count[SW_IQS_MAX];
+
+	/* Information on what CQs are polling this IQ */
+	uint32_t cq_num_mapped_cqs;
+	uint32_t cq_next_tx; /* cq to write next (non-atomic) packet */
+	uint32_t cq_map[SW_PORTS_MAX];
+
+	/* Track flow ids for atomic load balancing */
+	struct sw_fid_t fids[SW_QID_NUM_FIDS];
+
+	/* Track packet order for reordering when needed */
+	struct reorder_buffer_entry *reorder_buffer; /*< pkts await reorder */
+	struct rte_ring *reorder_buffer_freelist; /* available reorder slots */
+	uint32_t reorder_buffer_index; /* oldest valid reorder buffer entry */
+	uint32_t window_size;          /* Used to wrap reorder_buffer_index */
+
+	uint8_t priority;
+};
 
 struct sw_evdev {
 	struct rte_eventdev_data *data;
@@ -62,6 +134,9 @@ struct sw_evdev {
 	 */
 	uint32_t nb_events_limit;
 
+	/* Internal queues - one per logical queue */
+	struct sw_qid qids[RTE_EVENT_MAX_QUEUES_PER_DEV] __rte_cache_aligned;
+
 	int32_t sched_quanta;
 
 	uint32_t credit_update_quanta;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2 07/15] event/sw: add support for event queues

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:25PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add in the data structures for the event queues, and the eventdev
> functions to create and destroy those queues.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  drivers/event/sw/iq_ring.h  | 176 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/event/sw/sw_evdev.c | 158 +++++++++++++++++++++++++++++++++++++++
>  drivers/event/sw/sw_evdev.h |  75 +++++++++++++++++++
>  3 files changed, 409 insertions(+)
>  create mode 100644 drivers/event/sw/iq_ring.h
> 
> + */
> +
> +/*
> + * Ring structure definitions used for the internal ring buffers of the
> + * SW eventdev implementation. These are designed for single-core use only.
> + */

If I understand it correctly, IQ and QE rings are single producer and
single consumer rings. By the specification, multiple producers through
multiple ports can enqueue to the event queues at a time.Does SW implementation
support that? or am I missing something here?

> +#ifndef _IQ_RING_
> +#define _IQ_RING_
> +
> +#include <stdint.h>
> +
> +#include <rte_common.h>
> +#include <rte_memory.h>
> +#include <rte_malloc.h>
> +#include <rte_eventdev.h>
> +
> +#define IQ_RING_NAMESIZE 12
> +#define QID_IQ_DEPTH 512
> +#define QID_IQ_MASK (uint16_t)(QID_IQ_DEPTH - 1)
> +
> +struct iq_ring {
> +	char name[IQ_RING_NAMESIZE] __rte_cache_aligned;
> +	uint16_t write_idx;
> +	uint16_t read_idx;
> +
> +	struct rte_event ring[QID_IQ_DEPTH];
> +};
> +
> +#ifndef force_inline
> +#define force_inline inline __attribute__((always_inline))
> +#endif
> +
> +static inline struct iq_ring *
> +iq_ring_create(const char *name, unsigned int socket_id)
> +{
> +	struct iq_ring *retval;
> +
> +	retval = rte_malloc_socket(NULL, sizeof(*retval), 0, socket_id);
> +	if (retval == NULL)
> +		goto end;
> +
> +	snprintf(retval->name, sizeof(retval->name), "%s", name);
> +	retval->write_idx = retval->read_idx = 0;
> +end:
> +	return retval;
> +}
> +
> +static inline void
> +iq_ring_destroy(struct iq_ring *r)
> +{
> +	rte_free(r);
> +}
> +
> +static force_inline uint16_t
> +iq_ring_count(const struct iq_ring *r)
> +{
> +	return r->write_idx - r->read_idx;
> +}
> +
> +static force_inline uint16_t
> +iq_ring_free_count(const struct iq_ring *r)
> +{
> +	return QID_IQ_MASK - iq_ring_count(r);
> +}
> +
> +static force_inline uint16_t
> +iq_ring_enqueue_burst(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
> +{
> +	const uint16_t read = r->read_idx;
> +	uint16_t write = r->write_idx;
> +	const uint16_t space = read + QID_IQ_MASK - write;
> +	uint16_t i;
> +
> +	if (space < nb_qes)
> +		nb_qes = space;
> +
> +	for (i = 0; i < nb_qes; i++, write++)
> +		r->ring[write & QID_IQ_MASK] = qes[i];
> +
> +	r->write_idx = write;
> +
> +	return nb_qes;
> +}
> +
> diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
> index 65f00e4..aaa8056 100644
> --- a/drivers/event/sw/sw_evdev.h
> +++ b/drivers/event/sw/sw_evdev.h
> @@ -49,6 +49,78 @@
>  #define SW_INFLIGHT_EVENTS_TOTAL 4096
>  /* allow for lots of over-provisioning */
>  #define MAX_SW_PROD_Q_DEPTH 4096
> +#define SW_FRAGMENTS_MAX 16
> +
> +/* have a new scheduling type for 1:1 queue to port links */
> +#define RTE_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)

IMO, better to use SW_ for internal sched types

> +
> +#ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
> +#define SW_LOG_INFO(fmt, args...) \
> +	RTE_LOG(INFO, PMD, "[%s] %s() line %u: " fmt "\n", \
> +			PMD_NAME, \
> +			__func__, __LINE__, ## args)
> +
> +#define SW_LOG_DBG(fmt, args...) \
> +	RTE_LOG(DEBUG, PMD, "[%s] %s() line %u: " fmt "\n", \

Re: [dpdk-dev] [PATCH v2 07/15] event/sw: add support for event queues

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Monday, February 6, 2017 9:25 AM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> Subject: Re: [PATCH v2 07/15] event/sw: add support for event queues
> 
> On Tue, Jan 31, 2017 at 04:14:25PM +0000, Harry van Haaren wrote:
> > From: Bruce Richardson <bruce.richardson@intel.com>
> >
> > Add in the data structures for the event queues, and the eventdev
> > functions to create and destroy those queues.
> >
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> > ---
> >  drivers/event/sw/iq_ring.h  | 176 ++++++++++++++++++++++++++++++++++++++++++++
> >  drivers/event/sw/sw_evdev.c | 158 +++++++++++++++++++++++++++++++++++++++
> >  drivers/event/sw/sw_evdev.h |  75 +++++++++++++++++++
> >  3 files changed, 409 insertions(+)
> >  create mode 100644 drivers/event/sw/iq_ring.h
> >
> > + */
> > +
> > +/*
> > + * Ring structure definitions used for the internal ring buffers of the
> > + * SW eventdev implementation. These are designed for single-core use only.
> > + */
> 
> If I understand it correctly, IQ and QE rings are single producer and
> single consumer rings. By the specification, multiple producers through
> multiple ports can enqueue to the event queues at a time.Does SW implementation
> support that? or am I missing something here?

You're right that the IQ and QE rings are Single Producer, Single Consumer rings. More specifically, the QE is a ring for sending rte_event structs between cores, while the IQ ring is optimized for internal use in the scheduler core - and should not be used to send events between cores. Note that the design of the SW scheduler includes a central core for performing scheduling.

In other works, the QE rings transfer events from the worker core to the scheduler - and the scheduler pushes the events into what you call the "event queues" (aka, the atomic/ordered queue itself). These "event queues" are IQ instances. On egress from the scheduler, the event passes through a QE ring to the worker.

The result is that despite that only SP/SC rings are used, multiple workers can enqueue to any event queue.

Re: [dpdk-dev] [PATCH v2 07/15] event/sw: add support for event queues

[Jerin Jacob]

On Mon, Feb 06, 2017 at 10:25:18AM +0000, Van Haaren, Harry wrote:
> > -----Original Message-----
> > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > Sent: Monday, February 6, 2017 9:25 AM
> > To: Van Haaren, Harry <harry.van.haaren@intel.com>
> > Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> > Subject: Re: [PATCH v2 07/15] event/sw: add support for event queues
> > 
> > On Tue, Jan 31, 2017 at 04:14:25PM +0000, Harry van Haaren wrote:
> > > From: Bruce Richardson <bruce.richardson@intel.com>
> > >
> > > Add in the data structures for the event queues, and the eventdev
> > > functions to create and destroy those queues.
> > >
> > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> > > ---
> > >  drivers/event/sw/iq_ring.h  | 176 ++++++++++++++++++++++++++++++++++++++++++++
> > >  drivers/event/sw/sw_evdev.c | 158 +++++++++++++++++++++++++++++++++++++++
> > >  drivers/event/sw/sw_evdev.h |  75 +++++++++++++++++++
> > >  3 files changed, 409 insertions(+)
> > >  create mode 100644 drivers/event/sw/iq_ring.h
> > >
> > > + */
> > > +
> > > +/*
> > > + * Ring structure definitions used for the internal ring buffers of the
> > > + * SW eventdev implementation. These are designed for single-core use only.
> > > + */
> > 
> > If I understand it correctly, IQ and QE rings are single producer and
> > single consumer rings. By the specification, multiple producers through
> > multiple ports can enqueue to the event queues at a time.Does SW implementation
> > support that? or am I missing something here?
> 
> You're right that the IQ and QE rings are Single Producer, Single Consumer rings. More specifically, the QE is a ring for sending rte_event structs between cores, while the IQ ring is optimized for internal use in the scheduler core - and should not be used to send events between cores. Note that the design of the SW scheduler includes a central core for performing scheduling.

Thanks Harry. One question though,
In RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED mode, multiple SW schedulers can
be active. Right? If so, We need multi consumer. Right?

> 
> In other works, the QE rings transfer events from the worker core to the scheduler - and the scheduler pushes the events into what you call the "event queues" (aka, the atomic/ordered queue itself). These "event queues" are IQ instances. On egress from the scheduler, the event passes through a QE ring to the worker.
> 
> The result is that despite that only SP/SC rings are used, multiple workers can enqueue to any event queue.

Got it.

Re: [dpdk-dev] [PATCH v2 07/15] event/sw: add support for event queues

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Tuesday, February 7, 2017 6:58 AM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> Subject: Re: [PATCH v2 07/15] event/sw: add support for event queues
> 
> On Mon, Feb 06, 2017 at 10:25:18AM +0000, Van Haaren, Harry wrote:
> > > -----Original Message-----
> > > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > > Sent: Monday, February 6, 2017 9:25 AM
> > > To: Van Haaren, Harry <harry.van.haaren@intel.com>
> > > Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> > > Subject: Re: [PATCH v2 07/15] event/sw: add support for event queues
> > >
> > > On Tue, Jan 31, 2017 at 04:14:25PM +0000, Harry van Haaren wrote:
> > > > From: Bruce Richardson <bruce.richardson@intel.com>
> > > >
> > > > Add in the data structures for the event queues, and the eventdev
> > > > functions to create and destroy those queues.
> > > >
> > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> > > > ---
> > > >  drivers/event/sw/iq_ring.h  | 176 ++++++++++++++++++++++++++++++++++++++++++++
> > > >  drivers/event/sw/sw_evdev.c | 158 +++++++++++++++++++++++++++++++++++++++
> > > >  drivers/event/sw/sw_evdev.h |  75 +++++++++++++++++++
> > > >  3 files changed, 409 insertions(+)
> > > >  create mode 100644 drivers/event/sw/iq_ring.h
> > > >
> > > > + */
> > > > +
> > > > +/*
> > > > + * Ring structure definitions used for the internal ring buffers of the
> > > > + * SW eventdev implementation. These are designed for single-core use only.
> > > > + */
> > >
> > > If I understand it correctly, IQ and QE rings are single producer and
> > > single consumer rings. By the specification, multiple producers through
> > > multiple ports can enqueue to the event queues at a time.Does SW implementation
> > > support that? or am I missing something here?
> >
> > You're right that the IQ and QE rings are Single Producer, Single Consumer rings. More
> specifically, the QE is a ring for sending rte_event structs between cores, while the IQ ring
> is optimized for internal use in the scheduler core - and should not be used to send events
> between cores. Note that the design of the SW scheduler includes a central core for performing
> scheduling.
> 
> Thanks Harry. One question though,
> In RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED mode, multiple SW schedulers can
> be active. Right? If so, We need multi consumer. Right?

Note that the sw scheduler is a centralized scheduler, and does not support distributing the *scheduling* work itself.

In the case of having multiple software schedulers, each instance is its own scheduling domain - they don't interact with each other directly. There is no need for Multi-Producer / Multi-Consumer with this design as there is never more than 1 thread accessing the producer/consumer side of a ring.

> 
> >
> > In other works, the QE rings transfer events from the worker core to the scheduler - and the
> scheduler pushes the events into what you call the "event queues" (aka, the atomic/ordered
> queue itself). These "event queues" are IQ instances. On egress from the scheduler, the event
> passes through a QE ring to the worker.
> >
> > The result is that despite that only SP/SC rings are used, multiple workers can enqueue to
> any event queue.
> 
> Got it.
> 

[dpdk-dev] [PATCH v2 08/15] event/sw: add support for event ports

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the data-structures for the ports used by workers to send
packets to/from the scheduler. Also add in the functions to
create/destroy those ports.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/event_ring.h | 179 ++++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.c   |  75 ++++++++++++++++++
 drivers/event/sw/sw_evdev.h   |  76 ++++++++++++++++++
 3 files changed, 330 insertions(+)
 create mode 100644 drivers/event/sw/event_ring.h

diff --git a/drivers/event/sw/event_ring.h b/drivers/event/sw/event_ring.h
new file mode 100644
index 0000000..67aa72e
--- /dev/null
+++ b/drivers/event/sw/event_ring.h
@@ -0,0 +1,179 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Generic ring structure for passing events from one core to another.
+ *
+ * Used by the software scheduler for the producer and consumer rings for
+ * each port, i.e. for passing events from worker cores to scheduler and
+ * vice-versa. Designed for single-producer, single-consumer use with two
+ * cores working on each ring.
+ */
+
+#ifndef _EVENT_RING_
+#define _EVENT_RING_
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+
+#define QE_RING_NAMESIZE 32
+
+struct qe_ring {
+	char name[QE_RING_NAMESIZE] __rte_cache_aligned;
+	uint32_t ring_size; /* size of memory block allocated to the ring */
+	uint32_t mask;      /* mask for read/write values == ring_size -1 */
+	uint32_t size;      /* actual usable space in the ring */
+	volatile uint32_t write_idx __rte_cache_aligned;
+	volatile uint32_t read_idx __rte_cache_aligned;
+
+	struct rte_event ring[0] __rte_cache_aligned;
+};
+
+#ifndef force_inline
+#define force_inline inline __attribute__((always_inline))
+#endif
+
+static inline struct qe_ring *
+qe_ring_create(const char *name, unsigned int size, unsigned int socket_id)
+{
+	struct qe_ring *retval;
+	const uint32_t ring_size = rte_align32pow2(size + 1);
+	size_t memsize = sizeof(*retval) +
+			(ring_size * sizeof(retval->ring[0]));
+
+	retval = rte_zmalloc_socket(NULL, memsize, 0, socket_id);
+	if (retval == NULL)
+		goto end;
+
+	snprintf(retval->name, sizeof(retval->name), "EVDEV_RG_%s", name);
+	retval->ring_size = ring_size;
+	retval->mask = ring_size - 1;
+	retval->size = size;
+end:
+	return retval;
+}
+
+static inline void
+qe_ring_destroy(struct qe_ring *r)
+{
+	rte_free(r);
+}
+
+static force_inline unsigned int
+qe_ring_count(const struct qe_ring *r)
+{
+	return r->write_idx - r->read_idx;
+}
+
+static force_inline unsigned int
+qe_ring_free_count(const struct qe_ring *r)
+{
+	return r->size - qe_ring_count(r);
+}
+
+static force_inline unsigned int
+qe_ring_enqueue_burst(struct qe_ring *r, const struct rte_event *qes,
+		unsigned int nb_qes, uint16_t *free_count)
+{
+	const uint32_t size = r->size;
+	const uint32_t mask = r->mask;
+	const uint32_t read = r->read_idx;
+	uint32_t write = r->write_idx;
+	const uint32_t space = read + size - write;
+	uint32_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++)
+		r->ring[write & mask] = qes[i];
+
+	if (nb_qes != 0)
+		r->write_idx = write;
+
+	*free_count = space - nb_qes;
+
+	return nb_qes;
+}
+
+static force_inline unsigned int
+qe_ring_enqueue_burst_with_ops(struct qe_ring *r, const struct rte_event *qes,
+		unsigned int nb_qes, uint8_t *ops)
+{
+	const uint32_t size = r->size;
+	const uint32_t mask = r->mask;
+	const uint32_t read = r->read_idx;
+	uint32_t write = r->write_idx;
+	const uint32_t space = read + size - write;
+	uint32_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++) {
+		r->ring[write & mask] = qes[i];
+		r->ring[write & mask].op = ops[i];
+	}
+
+	if (nb_qes != 0)
+		r->write_idx = write;
+
+	return nb_qes;
+}
+
+static force_inline unsigned int
+qe_ring_dequeue_burst(struct qe_ring *r, struct rte_event *qes,
+		unsigned int nb_qes)
+{
+	const uint32_t mask = r->mask;
+	uint32_t read = r->read_idx;
+	const uint32_t write = r->write_idx;
+	const uint32_t items = write - read;
+	uint32_t i;
+
+	if (items < nb_qes)
+		nb_qes = items;
+
+
+	for (i = 0; i < nb_qes; i++, read++)
+		qes[i] = r->ring[read & mask];
+
+	if (nb_qes != 0)
+		r->read_idx += nb_qes;
+
+	return nb_qes;
+}
+
+#endif
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index ec756b8..0b26fcb 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -39,12 +39,85 @@
 
 #include "sw_evdev.h"
 #include "iq_ring.h"
+#include "event_ring.h"
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define NUMA_NODE_ARG "numa_node"
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info);
+
+static int
+sw_port_setup(struct rte_eventdev *dev, uint8_t port_id,
+		const struct rte_event_port_conf *conf)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	struct sw_port *p = &sw->ports[port_id];
+	char buf[QE_RING_NAMESIZE];
+	unsigned int i;
+
+	struct rte_event_dev_info info;
+	sw_info_get(dev, &info);
+
+	uint8_t enq_oversize =
+		conf->enqueue_depth > info.max_event_port_enqueue_depth;
+	uint8_t deq_oversize =
+		conf->dequeue_depth > info.max_event_port_dequeue_depth;
+	if (enq_oversize || deq_oversize)
+		return -EINVAL;
+
+	*p = (struct sw_port){0}; /* zero entire structure */
+	p->id = port_id;
+	p->sw = sw;
+
+	snprintf(buf, sizeof(buf), "sw%d_%s", dev->data->dev_id,
+			"rx_worker_ring");
+	p->rx_worker_ring = qe_ring_create(buf, MAX_SW_PROD_Q_DEPTH,
+			dev->data->socket_id);
+	if (p->rx_worker_ring == NULL) {
+		printf("%s %d: error creating RX worker ring\n",
+				__func__, __LINE__);
+		return -1;
+	}
+
+	p->inflight_max = conf->new_event_threshold;
+
+	snprintf(buf, sizeof(buf), "sw%d_%s", dev->data->dev_id,
+			"cq_worker_ring");
+	p->cq_worker_ring = qe_ring_create(buf, conf->dequeue_depth,
+			dev->data->socket_id);
+	if (p->cq_worker_ring == NULL) {
+		qe_ring_destroy(p->rx_worker_ring);
+		printf("%s %d: error creating CQ worker ring\n",
+				__func__, __LINE__);
+		return -1;
+	}
+	sw->cq_ring_space[port_id] = conf->dequeue_depth;
+
+	/* set hist list contents to empty */
+	for (i = 0; i < SW_PORT_HIST_LIST; i++) {
+		p->hist_list[i].fid = -1;
+		p->hist_list[i].qid = -1;
+	}
+	dev->data->ports[port_id] = p;
+
+	return 0;
+}
+
+static void
+sw_port_release(void *port)
+{
+	struct sw_port *p = (void *)port;
+	if (p == NULL)
+		return;
+
+	qe_ring_destroy(p->rx_worker_ring);
+	qe_ring_destroy(p->cq_worker_ring);
+	memset(p, 0, sizeof(*p));
+}
+
 static int32_t
 qid_init(struct sw_evdev *sw, unsigned int idx, int type,
 		const struct rte_event_queue_conf *queue_conf)
@@ -306,6 +379,8 @@ sw_probe(const char *name, const char *params)
 			.queue_setup = sw_queue_setup,
 			.queue_release = sw_queue_release,
 			.port_def_conf = sw_port_def_conf,
+			.port_setup = sw_port_setup,
+			.port_release = sw_port_release,
 	};
 
 	static const char *const args[] = {
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index aaa8056..0bae511 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -51,6 +51,13 @@
 #define MAX_SW_PROD_Q_DEPTH 4096
 #define SW_FRAGMENTS_MAX 16
 
+/* report dequeue burst sizes in buckets */
+#define SW_DEQ_STAT_BUCKET_SHIFT 2
+/* how many packets pulled from port by sched */
+#define SCHED_DEQUEUE_BURST_SIZE 32
+
+#define SW_PORT_HIST_LIST (MAX_SW_PROD_Q_DEPTH) /* size of our history list */
+
 /* have a new scheduling type for 1:1 queue to port links */
 #define RTE_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
 
@@ -122,12 +129,78 @@ struct sw_qid {
 	uint8_t priority;
 };
 
+struct sw_hist_list_entry {
+	int32_t qid;
+	int32_t fid;
+	struct reorder_buffer_entry *rob_entry;
+};
+
+struct sw_evdev;
+
+struct sw_port {
+	/* new enqueue / dequeue API doesn't have an instance pointer, only the
+	 * pointer to the port being enqueue/dequeued from
+	 */
+	struct sw_evdev *sw;
+
+	/* A numeric ID for the port */
+	uint8_t id;
+
+	int16_t is_directed; /** Takes from a single directed QID */
+	/**
+	 * For loadbalanced we can optimise pulling packets from
+	 * producers if there is no reordering involved
+	 */
+	int16_t num_ordered_qids;
+
+	/** Ring and buffer for pulling events from workers for scheduling */
+	struct qe_ring *rx_worker_ring __rte_cache_aligned;
+	/** Ring and buffer for pushing packets to workers after scheduling */
+	struct qe_ring *cq_worker_ring;
+
+	/* hole */
+
+	/* num releases yet to be completed on this port */
+	uint16_t outstanding_releases __rte_cache_aligned;
+	uint16_t inflight_max; /* app requested max inflights for this port */
+	uint16_t inflight_credits; /* num credits this port has right now */
+
+	uint16_t last_dequeue_burst_sz; /* how big the burst was */
+	uint64_t last_dequeue_ticks; /* used to track burst processing time */
+	uint64_t avg_pkt_ticks;      /* tracks average over NUM_SAMPLES burst */
+	uint64_t total_polls;        /* how many polls were counted in stats */
+	uint64_t zero_polls;         /* tracks polls returning nothing */
+	uint32_t poll_buckets[MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT];
+		/* bucket values in 4s for shorter reporting */
+
+	/* History list structs, containing info on pkts egressed to worker */
+	uint16_t hist_head __rte_cache_aligned;
+	uint16_t hist_tail;
+	uint16_t inflights;
+	struct sw_hist_list_entry hist_list[SW_PORT_HIST_LIST];
+
+	/* track packets in and out of this port */
+	struct sw_point_stats stats;
+
+
+	uint32_t pp_buf_start;
+	uint32_t pp_buf_count;
+	uint16_t cq_buf_count;
+	struct rte_event pp_buf[SCHED_DEQUEUE_BURST_SIZE];
+	struct rte_event cq_buf[MAX_SW_CONS_Q_DEPTH];
+
+	uint8_t num_qids_mapped;
+};
+
 struct sw_evdev {
 	struct rte_eventdev_data *data;
 
 	uint32_t port_count;
 	uint32_t qid_count;
 
+	/* Contains all ports - load balanced and directed */
+	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
+
 	/*
 	 * max events in this instance. Cached here for performance.
 	 * (also available in data->conf.nb_events_limit)
@@ -137,6 +210,9 @@ struct sw_evdev {
 	/* Internal queues - one per logical queue */
 	struct sw_qid qids[RTE_EVENT_MAX_QUEUES_PER_DEV] __rte_cache_aligned;
 
+	/* Cache how many packets are in each cq */
+	uint16_t cq_ring_space[SW_PORTS_MAX] __rte_cache_aligned;
+
 	int32_t sched_quanta;
 
 	uint32_t credit_update_quanta;
-- 
2.7.4

[dpdk-dev] [PATCH v2 09/15] event/sw: add support for linking queues to ports

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 0b26fcb..693a833 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -50,6 +50,72 @@ static void
 sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info);
 
 static int
+sw_port_link(void *port, const uint8_t queues[], const uint8_t priorities[],
+		uint16_t num)
+{
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = p->sw;
+	int i;
+
+	RTE_SET_USED(priorities);
+	for (i = 0; i < num; i++) {
+		struct sw_qid *q = &sw->qids[queues[i]];
+
+		/* check for qid map overflow */
+		if (q->cq_num_mapped_cqs >= RTE_DIM(q->cq_map))
+			break;
+
+		if (p->is_directed && p->num_qids_mapped > 0)
+			break;
+
+		if (q->type == RTE_SCHED_TYPE_DIRECT) {
+			/* check directed qids only map to one port */
+			if (p->num_qids_mapped > 0)
+				break;
+			/* check port only takes a directed flow */
+			if (num > 1)
+				break;
+
+			p->is_directed = 1;
+			p->num_qids_mapped = 1;
+		} else if (q->type == RTE_SCHED_TYPE_ORDERED) {
+			p->num_ordered_qids++;
+			p->num_qids_mapped++;
+		} else if (q->type == RTE_SCHED_TYPE_ATOMIC) {
+			p->num_qids_mapped++;
+		}
+
+		q->cq_map[q->cq_num_mapped_cqs] = p->id;
+		rte_smp_wmb();
+		q->cq_num_mapped_cqs++;
+	}
+	return i;
+}
+
+static int
+sw_port_unlink(void *port, uint8_t queues[], uint16_t nb_unlinks)
+{
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = p->sw;
+	unsigned int i, j;
+
+	int unlinked = 0;
+	for (i = 0; i < nb_unlinks; i++) {
+		struct sw_qid *q = &sw->qids[queues[i]];
+		for (j = 0; j < q->cq_num_mapped_cqs; j++)
+			if (q->cq_map[j] == p->id) {
+				q->cq_map[j] =
+					q->cq_map[q->cq_num_mapped_cqs - 1];
+				rte_smp_wmb();
+				q->cq_num_mapped_cqs--;
+				unlinked++;
+				continue;
+			}
+	}
+	return unlinked;
+}
+
+static int
 sw_port_setup(struct rte_eventdev *dev, uint8_t port_id,
 		const struct rte_event_port_conf *conf)
 {
@@ -381,6 +447,8 @@ sw_probe(const char *name, const char *params)
 			.port_def_conf = sw_port_def_conf,
 			.port_setup = sw_port_setup,
 			.port_release = sw_port_release,
+			.port_link = sw_port_link,
+			.port_unlink = sw_port_unlink,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2 09/15] event/sw: add support for linking queues to ports

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:27PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  drivers/event/sw/sw_evdev.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
> index 0b26fcb..693a833 100644
> --- a/drivers/event/sw/sw_evdev.c
> +++ b/drivers/event/sw/sw_evdev.c
> @@ -50,6 +50,72 @@ static void
>  sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info);
>  
>  static int
> +sw_port_link(void *port, const uint8_t queues[], const uint8_t priorities[],
> +		uint16_t num)
> +{
> +	struct sw_port *p = (void *)port;
> +	struct sw_evdev *sw = p->sw;
> +	int i;
> +
> +	RTE_SET_USED(priorities);
> +	for (i = 0; i < num; i++) {
> +		struct sw_qid *q = &sw->qids[queues[i]];
> +
> +		/* check for qid map overflow */
> +		if (q->cq_num_mapped_cqs >= RTE_DIM(q->cq_map))
> +			break;
> +
> +		if (p->is_directed && p->num_qids_mapped > 0)
> +			break;
> +
> +		if (q->type == RTE_SCHED_TYPE_DIRECT) {
> +			/* check directed qids only map to one port */
> +			if (p->num_qids_mapped > 0)
> +				break;
> +			/* check port only takes a directed flow */
> +			if (num > 1)
> +				break;
> +
> +			p->is_directed = 1;
> +			p->num_qids_mapped = 1;

What is the expected behavior if queues configured with
RTE_EVENT_QUEUE_CFG_SINGLE_LINK attempted to link by multiple ports?

Based on the head-file, the expected behavior is following,

(-EDQUOT) Quota exceeded(Application tried to link the queue
configured with RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)

> +		} else if (q->type == RTE_SCHED_TYPE_ORDERED) {
> +			p->num_ordered_qids++;
> +			p->num_qids_mapped++;
> +		} else if (q->type == RTE_SCHED_TYPE_ATOMIC) {
> +			p->num_qids_mapped++;
> +		}
> +
> +		q->cq_map[q->cq_num_mapped_cqs] = p->id;
> +		rte_smp_wmb();
> +		q->cq_num_mapped_cqs++;
> +	}
> +	return i;
> +}
> +
> +static int
> +sw_port_unlink(void *port, uint8_t queues[], uint16_t nb_unlinks)
> +{
> +	struct sw_port *p = (void *)port;
> +	struct sw_evdev *sw = p->sw;
> +	unsigned int i, j;
> +
> +	int unlinked = 0;
> +	for (i = 0; i < nb_unlinks; i++) {
> +		struct sw_qid *q = &sw->qids[queues[i]];
> +		for (j = 0; j < q->cq_num_mapped_cqs; j++)
> +			if (q->cq_map[j] == p->id) {
> +				q->cq_map[j] =
> +					q->cq_map[q->cq_num_mapped_cqs - 1];
> +				rte_smp_wmb();
> +				q->cq_num_mapped_cqs--;
> +				unlinked++;
> +				continue;
> +			}
> +	}
> +	return unlinked;
> +}
> +
> +static int
>  sw_port_setup(struct rte_eventdev *dev, uint8_t port_id,
>  		const struct rte_event_port_conf *conf)
>  {
> @@ -381,6 +447,8 @@ sw_probe(const char *name, const char *params)
>  			.port_def_conf = sw_port_def_conf,
>  			.port_setup = sw_port_setup,
>  			.port_release = sw_port_release,
> +			.port_link = sw_port_link,
> +			.port_unlink = sw_port_unlink,
>  	};
>  
>  	static const char *const args[] = {
> -- 
> 2.7.4
> 

[dpdk-dev] [PATCH v2 10/15] event/sw: add worker core functions

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

add the event enqueue, dequeue and release functions to the eventdev.
These also include tracking of stats for observability in the load of
the scheduler.
Internally in the enqueue function, the various types of enqueue
operations, to forward an existing event, to send a new event, to
drop a previous event, are converted to a series of flags which will
be used by the scheduler code to perform the needed actions for that
event.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile          |   1 +
 drivers/event/sw/sw_evdev.c        |   5 +
 drivers/event/sw/sw_evdev.h        |  35 +++++++
 drivers/event/sw/sw_evdev_worker.c | 186 +++++++++++++++++++++++++++++++++++++
 4 files changed, 227 insertions(+)
 create mode 100644 drivers/event/sw/sw_evdev_worker.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index d6836e3..b6ecd91 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -53,6 +53,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 693a833..b719f65 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -378,6 +378,7 @@ sw_dev_configure(const struct rte_eventdev *dev)
 	sw->qid_count = conf->nb_event_queues;
 	sw->port_count = conf->nb_event_ports;
 	sw->nb_events_limit = conf->nb_events_limit;
+	rte_atomic32_set(&sw->inflights, 0);
 
 	return 0;
 }
@@ -516,6 +517,10 @@ sw_probe(const char *name, const char *params)
 		return -EFAULT;
 	}
 	dev->dev_ops = &evdev_sw_ops;
+	dev->enqueue = sw_event_enqueue;
+	dev->enqueue_burst = sw_event_enqueue_burst;
+	dev->dequeue = sw_event_dequeue;
+	dev->dequeue_burst = sw_event_dequeue_burst;
 
 	sw = dev->data->dev_private;
 	sw->data = dev->data;
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 0bae511..ea39bb2 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -57,10 +57,35 @@
 #define SCHED_DEQUEUE_BURST_SIZE 32
 
 #define SW_PORT_HIST_LIST (MAX_SW_PROD_Q_DEPTH) /* size of our history list */
+#define NUM_SAMPLES 64 /* how many data points use for average stats */
 
 /* have a new scheduling type for 1:1 queue to port links */
 #define RTE_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
 
+enum {
+	QE_FLAG_VALID_SHIFT = 0,
+	QE_FLAG_COMPLETE_SHIFT,
+	QE_FLAG_NOT_EOP_SHIFT,
+	_QE_FLAG_COUNT
+};
+
+#define QE_FLAG_VALID    (1 << QE_FLAG_VALID_SHIFT)    /* for NEW FWD, FRAG */
+#define QE_FLAG_COMPLETE (1 << QE_FLAG_COMPLETE_SHIFT) /* set for FWD, DROP  */
+#define QE_FLAG_NOT_EOP  (1 << QE_FLAG_NOT_EOP_SHIFT)  /* set for FRAG only  */
+
+static const uint8_t sw_qe_flag_map[] = {
+		QE_FLAG_VALID /* NEW Event */,
+		QE_FLAG_VALID | QE_FLAG_COMPLETE /* FWD Event */,
+		QE_FLAG_COMPLETE /* RELEASE Event */,
+
+		/* Values which can be used for future support for partial
+		 * events, i.e. where one event comes back to the scheduler
+		 * as multiple which need to be tracked together
+		 */
+		QE_FLAG_VALID | QE_FLAG_COMPLETE | QE_FLAG_NOT_EOP,
+};
+
+
 #ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
 #define SW_LOG_INFO(fmt, args...) \
 	RTE_LOG(INFO, PMD, "[%s] %s() line %u: " fmt "\n", \
@@ -201,6 +226,8 @@ struct sw_evdev {
 	/* Contains all ports - load balanced and directed */
 	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
 
+	rte_atomic32_t inflights __rte_cache_aligned;
+
 	/*
 	 * max events in this instance. Cached here for performance.
 	 * (also available in data->conf.nb_events_limit)
@@ -232,4 +259,12 @@ sw_pmd_priv_const(const struct rte_eventdev *eventdev)
 
 extern int sched_quanta;
 
+uint16_t sw_event_enqueue(void *port, const struct rte_event *ev);
+uint16_t sw_event_enqueue_burst(void *port, const struct rte_event ev[],
+		uint16_t num);
+
+uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
+uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
+			uint64_t wait);
+
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_worker.c b/drivers/event/sw/sw_evdev_worker.c
new file mode 100644
index 0000000..5c6b3ab
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_worker.c
@@ -0,0 +1,186 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+
+#include "sw_evdev.h"
+#include "event_ring.h"
+
+#define PORT_ENQUEUE_MAX_BURST_SIZE 64
+
+static inline void
+sw_event_release(struct sw_port *p, uint8_t index)
+{
+	/*
+	 * Drops the next outstanding event in our history. Used on dequeue
+	 * to clear any history before dequeuing more events.
+	 */
+	RTE_SET_USED(index);
+
+	/* create drop message */
+	struct rte_event ev = {
+		.op = sw_qe_flag_map[RTE_EVENT_OP_RELEASE],
+	};
+
+	uint16_t free_count;
+	qe_ring_enqueue_burst(p->rx_worker_ring, &ev, 1, &free_count);
+
+	p->outstanding_releases--;
+}
+
+uint16_t
+sw_event_enqueue_burst(void *port, const struct rte_event ev[], uint16_t num)
+{
+	int32_t i;
+	uint8_t new_ops[PORT_ENQUEUE_MAX_BURST_SIZE];
+	struct sw_port *p = port;
+	struct sw_evdev *sw = (void *)p->sw;
+	uint32_t sw_inflights = rte_atomic32_read(&sw->inflights);
+
+	if (p->inflight_max < sw_inflights)
+		return 0;
+	if (num > PORT_ENQUEUE_MAX_BURST_SIZE)
+		num = PORT_ENQUEUE_MAX_BURST_SIZE;
+
+	if (p->inflight_credits < num) {
+		/* Check if sending events would bring instance over the
+		 * max events threshold
+		 */
+		uint32_t credit_update_quanta = sw->credit_update_quanta;
+		if (sw_inflights + credit_update_quanta > sw->nb_events_limit)
+			return 0;
+
+		rte_atomic32_add(&sw->inflights, credit_update_quanta);
+		p->inflight_credits += (credit_update_quanta);
+
+		if (p->inflight_credits < num)
+			return 0;
+	}
+
+	for (i = 0; i < num; i++) {
+		int op = ev[i].op;
+		int outstanding = p->outstanding_releases > 0;
+		const uint8_t invalid_qid = (ev[i].queue_id >= sw->qid_count);
+
+		p->inflight_credits -= (op == RTE_EVENT_OP_NEW);
+		p->inflight_credits += (op == RTE_EVENT_OP_RELEASE) *
+					outstanding;
+
+		new_ops[i] = sw_qe_flag_map[op];
+		new_ops[i] &= ~(invalid_qid << QE_FLAG_VALID_SHIFT);
+
+		/* FWD and RELEASE packets will both resolve to taken (assuming
+		 * correct usage of the API), providing very high correct
+		 * prediction rate.
+		 */
+		if ((new_ops[i] & QE_FLAG_COMPLETE) && outstanding)
+			p->outstanding_releases--;
+		/* Branch to avoid touching p->stats except error case */
+		if (invalid_qid)
+			p->stats.rx_dropped++;
+	}
+
+	/* returns number of events actually enqueued */
+	uint32_t enq = qe_ring_enqueue_burst_with_ops(p->rx_worker_ring, ev, i,
+					     new_ops);
+	if (p->outstanding_releases == 0 && p->last_dequeue_burst_sz != 0) {
+		uint64_t burst_ticks = rte_get_timer_cycles() -
+				p->last_dequeue_ticks;
+		uint64_t burst_pkt_ticks =
+			burst_ticks / p->last_dequeue_burst_sz;
+		p->avg_pkt_ticks -= p->avg_pkt_ticks / NUM_SAMPLES;
+		p->avg_pkt_ticks += burst_pkt_ticks / NUM_SAMPLES;
+		p->last_dequeue_ticks = 0;
+	}
+	return enq;
+}
+
+uint16_t
+sw_event_enqueue(void *port, const struct rte_event *ev)
+{
+	return sw_event_enqueue_burst(port, ev, 1);
+}
+
+uint16_t
+sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
+		uint64_t wait)
+{
+	RTE_SET_USED(wait);
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = (void *)p->sw;
+	struct qe_ring *ring = p->cq_worker_ring;
+	uint32_t credit_update_quanta = sw->credit_update_quanta;
+
+	/* check that all previous dequeues have been released */
+	if (!p->is_directed) {
+		uint16_t out_rels = p->outstanding_releases;
+		uint16_t i;
+		for (i = 0; i < out_rels; i++)
+			sw_event_release(p, i);
+	}
+
+	/* Intel modification: may not be in final API */
+	if (ev == 0)
+		return 0;
+
+	/* returns number of events actually dequeued */
+	uint16_t ndeq = qe_ring_dequeue_burst(ring, ev, num);
+	if (ndeq == 0) {
+		p->outstanding_releases = 0;
+		p->zero_polls++;
+		p->total_polls++;
+		goto end;
+	}
+
+	/* only add credits for directed ports - LB ports send RELEASEs */
+	p->inflight_credits += ndeq * p->is_directed;
+	p->outstanding_releases = ndeq;
+	p->last_dequeue_burst_sz = ndeq;
+	p->last_dequeue_ticks = rte_get_timer_cycles();
+	p->poll_buckets[(ndeq - 1) >> SW_DEQ_STAT_BUCKET_SHIFT]++;
+	p->total_polls++;
+
+end:
+	if (p->inflight_credits >= credit_update_quanta * 2 &&
+			p->inflight_credits > credit_update_quanta + ndeq) {
+		rte_atomic32_sub(&sw->inflights, credit_update_quanta);
+		p->inflight_credits -= credit_update_quanta;
+	}
+	return ndeq;
+}
+
+uint16_t
+sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait)
+{
+	return sw_event_dequeue_burst(port, ev, 1, wait);
+}
-- 
2.7.4

[dpdk-dev] [PATCH v2 11/15] event/sw: add scheduling logic

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the scheduling function which takes the events from the
producer queues and buffers them before scheduling them to consumer
queues. The scheduling logic includes support for atomic, reordered,
and parallel scheduling of flows.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile             |   1 +
 drivers/event/sw/sw_evdev.c           |   1 +
 drivers/event/sw/sw_evdev.h           |  11 +
 drivers/event/sw/sw_evdev_scheduler.c | 602 ++++++++++++++++++++++++++++++++++
 4 files changed, 615 insertions(+)
 create mode 100644 drivers/event/sw/sw_evdev_scheduler.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index b6ecd91..a7f5b3d 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -54,6 +54,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_scheduler.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index b719f65..17b5e49 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -521,6 +521,7 @@ sw_probe(const char *name, const char *params)
 	dev->enqueue_burst = sw_event_enqueue_burst;
 	dev->dequeue = sw_event_dequeue;
 	dev->dequeue_burst = sw_event_dequeue_burst;
+	dev->schedule = sw_event_schedule;
 
 	sw = dev->data->dev_private;
 	sw->data = dev->data;
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index ea39bb2..63b0979 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -240,8 +240,18 @@ struct sw_evdev {
 	/* Cache how many packets are in each cq */
 	uint16_t cq_ring_space[SW_PORTS_MAX] __rte_cache_aligned;
 
+	/* Array of pointers to load-balanced QIDs sorted by priority level */
+	struct sw_qid *qids_prioritized[RTE_EVENT_MAX_QUEUES_PER_DEV];
+
+	/* Stats */
+	struct sw_point_stats stats __rte_cache_aligned;
+	uint64_t sched_called;
 	int32_t sched_quanta;
+	uint64_t sched_no_iq_enqueues;
+	uint64_t sched_no_cq_enqueues;
+	uint64_t sched_cq_qid_called;
 
+	uint8_t started;
 	uint32_t credit_update_quanta;
 };
 
@@ -266,5 +276,6 @@ uint16_t sw_event_enqueue_burst(void *port, const struct rte_event ev[],
 uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
 uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
 			uint64_t wait);
+void sw_event_schedule(struct rte_eventdev *dev);
 
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_scheduler.c b/drivers/event/sw/sw_evdev_scheduler.c
new file mode 100644
index 0000000..3b30efe
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_scheduler.c
@@ -0,0 +1,602 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_ring.h>
+#include <rte_hash_crc.h>
+#include "sw_evdev.h"
+#include "iq_ring.h"
+#include "event_ring.h"
+
+#define SW_IQS_MASK (SW_IQS_MAX-1)
+
+/* Retrieve the highest priority IQ or -1 if no pkts available. Doing the
+ * CLZ twice is faster than caching the value due to data dependencies
+ */
+#define PKT_MASK_TO_IQ(pkts) \
+	(__builtin_ctz(pkts | (1 << SW_IQS_MAX)))
+
+/* Clamp the highest priorities to the max value as allowed by
+ * the mask. Assums MASK is (powerOfTwo - 1). Priority 0 (highest) are shifted
+ * into leftmost IQ so that clz() reads it first on dequeue
+ */
+#define PRIO_TO_IQ(prio) (prio > SW_IQS_MASK ? SW_IQS_MASK : prio)
+
+#define MAX_PER_IQ_DEQUEUE 48
+#define FLOWID_MASK (SW_QID_NUM_FIDS-1)
+
+static inline uint32_t
+sw_schedule_atomic_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count)
+{
+	struct rte_event qes[MAX_PER_IQ_DEQUEUE]; /* count <= MAX */
+	struct rte_event blocked_qes[MAX_PER_IQ_DEQUEUE];
+	uint32_t nb_blocked = 0;
+	uint32_t i;
+
+	if (count > MAX_PER_IQ_DEQUEUE)
+		count = MAX_PER_IQ_DEQUEUE;
+
+	/* This is the QID ID. The QID ID is static, hence it can be
+	 * used to identify the stage of processing in history lists etc
+	 */
+	uint32_t qid_id = qid->id;
+
+	iq_ring_dequeue_burst(qid->iq[iq_num], qes, count);
+	for (i = 0; i < count; i++) {
+		const struct rte_event *qe = &qes[i];
+		/* use cheap bit mixing, we only need to lose a few bits */
+		uint32_t flow_id32 = (qes[i].flow_id) ^ (qes[i].flow_id >> 10);
+		const uint16_t flow_id = FLOWID_MASK & flow_id32;
+		struct sw_fid_t *fid = &qid->fids[flow_id];
+		int cq = fid->cq;
+
+		if (cq < 0) {
+			uint32_t cq_idx = qid->cq_next_tx++;
+			if (qid->cq_next_tx == qid->cq_num_mapped_cqs)
+				qid->cq_next_tx = 0;
+			cq = qid->cq_map[cq_idx];
+
+			/* find least used */
+			int cq_free_cnt = sw->cq_ring_space[cq];
+			for (cq_idx = 0; cq_idx < qid->cq_num_mapped_cqs;
+					cq_idx++) {
+				int test_cq = qid->cq_map[cq_idx];
+				int test_cq_free = sw->cq_ring_space[test_cq];
+				if (test_cq_free > cq_free_cnt) {
+					cq = test_cq;
+					cq_free_cnt = test_cq_free;
+				}
+			}
+
+			fid->cq = cq; /* this pins early */
+		}
+
+		if (sw->cq_ring_space[cq] == 0 ||
+				sw->ports[cq].inflights == SW_PORT_HIST_LIST) {
+			blocked_qes[nb_blocked++] = *qe;
+			continue;
+		}
+
+		struct sw_port *p = &sw->ports[cq];
+
+		/* at this point we can queue up the packet on the cq_buf */
+		fid->pcount++;
+		p->cq_buf[p->cq_buf_count++] = *qe;
+		p->inflights++;
+		sw->cq_ring_space[cq]--;
+
+		int head = (p->hist_head++ & (SW_PORT_HIST_LIST-1));
+		p->hist_list[head].fid = flow_id;
+		p->hist_list[head].qid = qid_id;
+
+		p->stats.tx_pkts++;
+		qid->stats.tx_pkts++;
+
+		/* if we just filled in the last slot, flush the buffer */
+		if (sw->cq_ring_space[cq] == 0) {
+			struct qe_ring *worker = p->cq_worker_ring;
+			qe_ring_enqueue_burst(worker, p->cq_buf,
+					p->cq_buf_count,
+					&sw->cq_ring_space[cq]);
+			p->cq_buf_count = 0;
+		}
+	}
+	iq_ring_put_back(qid->iq[iq_num], blocked_qes, nb_blocked);
+
+	return count - nb_blocked;
+}
+
+static inline uint32_t
+sw_schedule_parallel_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count, int keep_order)
+{
+	uint32_t i;
+	uint32_t cq_idx = qid->cq_next_tx;
+
+	/* This is the QID ID. The QID ID is static, hence it can be
+	 * used to identify the stage of processing in history lists etc
+	 */
+	uint32_t qid_id = qid->id;
+
+	if (count > MAX_PER_IQ_DEQUEUE)
+		count = MAX_PER_IQ_DEQUEUE;
+
+	if (keep_order)
+		/* only schedule as many as we have reorder buffer entries */
+		count = RTE_MIN(count,
+				rte_ring_count(qid->reorder_buffer_freelist));
+
+	for (i = 0; i < count; i++) {
+		const struct rte_event *qe = iq_ring_peek(qid->iq[iq_num]);
+		uint32_t cq_check_count = 0;
+		uint32_t cq;
+
+		/*
+		 *  for parallel, just send to next available CQ in round-robin
+		 * fashion. So scan for an available CQ. If all CQs are full
+		 * just return and move on to next QID
+		 */
+		do {
+			if (++cq_check_count > qid->cq_num_mapped_cqs)
+				goto exit;
+			cq = qid->cq_map[cq_idx];
+			if (++cq_idx == qid->cq_num_mapped_cqs)
+				cq_idx = 0;
+		} while (qe_ring_free_count(sw->ports[cq].cq_worker_ring) == 0 ||
+				sw->ports[cq].inflights == SW_PORT_HIST_LIST);
+
+		struct sw_port *p = &sw->ports[cq];
+		if (sw->cq_ring_space[cq] == 0 ||
+				p->inflights == SW_PORT_HIST_LIST)
+			break;
+
+		sw->cq_ring_space[cq]--;
+
+		qid->stats.tx_pkts++;
+
+		const int head = (p->hist_head & (SW_PORT_HIST_LIST-1));
+
+		p->hist_list[head].fid = qe->flow_id;
+		p->hist_list[head].qid = qid_id;
+
+		if (keep_order)
+			rte_ring_sc_dequeue(qid->reorder_buffer_freelist,
+					(void *)&p->hist_list[head].rob_entry);
+
+		sw->ports[cq].cq_buf[sw->ports[cq].cq_buf_count++] = *qe;
+		iq_ring_pop(qid->iq[iq_num]);
+
+		rte_compiler_barrier();
+		p->inflights++;
+		p->stats.tx_pkts++;
+		p->hist_head++;
+	}
+exit:
+	qid->cq_next_tx = cq_idx;
+	return i;
+}
+
+static uint32_t
+sw_schedule_dir_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count __rte_unused)
+{
+	uint32_t cq_id = qid->cq_map[0];
+	struct sw_port *port = &sw->ports[cq_id];
+
+	/* get max burst enq size for cq_ring */
+	uint32_t count_free = sw->cq_ring_space[cq_id];
+	if (count_free == 0)
+		return 0;
+
+	/* burst dequeue from the QID IQ ring */
+	struct iq_ring *ring = qid->iq[iq_num];
+	uint32_t ret = iq_ring_dequeue_burst(ring,
+			&port->cq_buf[port->cq_buf_count], count_free);
+	port->cq_buf_count += ret;
+
+	/* Update QID, Port and Total TX stats */
+	qid->stats.tx_pkts += ret;
+	port->stats.tx_pkts += ret;
+
+	/* Subtract credits from cached value */
+	sw->cq_ring_space[cq_id] -= ret;
+
+	return ret;
+}
+
+static uint32_t
+sw_schedule_qid_to_cq(struct sw_evdev *sw)
+{
+	uint32_t pkts = 0;
+	uint32_t qid_idx;
+
+	sw->sched_cq_qid_called++;
+
+	for (qid_idx = 0; qid_idx < sw->qid_count; qid_idx++) {
+		struct sw_qid *qid = sw->qids_prioritized[qid_idx];
+
+		int type = qid->type;
+		int iq_num = PKT_MASK_TO_IQ(qid->iq_pkt_mask);
+
+		/* zero mapped CQs indicates directed */
+		if (iq_num >= SW_IQS_MAX)
+			continue;
+
+		uint32_t pkts_done = 0;
+		uint32_t count = iq_ring_count(qid->iq[iq_num]);
+
+		if (count > 0) {
+			if (type == RTE_SCHED_TYPE_DIRECT)
+				pkts_done += sw_schedule_dir_to_cq(sw, qid,
+						iq_num, count);
+			else if (type == RTE_SCHED_TYPE_ATOMIC)
+				pkts_done += sw_schedule_atomic_to_cq(sw, qid,
+						iq_num, count);
+			else
+				pkts_done += sw_schedule_parallel_to_cq(sw, qid,
+						iq_num, count,
+						type == RTE_SCHED_TYPE_ORDERED);
+		}
+
+		/* Check if the IQ that was polled is now empty, and unset it
+		 * in the IQ mask if its empty.
+		 */
+		int all_done = (pkts_done == count);
+
+		qid->iq_pkt_mask &= ~(all_done << (iq_num));
+		pkts += pkts_done;
+	}
+
+	return pkts;
+}
+
+/* This function will perform re-ordering of packets, and injecting into
+ * the appropriate QID IQ. As LB and DIR QIDs are in the same array, but *NOT*
+ * contiguous in that array, this function accepts a "range" of QIDs to scan.
+ */
+static uint16_t
+sw_schedule_reorder(struct sw_evdev *sw, int qid_start, int qid_end)
+{
+	/* Perform egress reordering */
+	struct rte_event *qe;
+	uint32_t pkts_iter = 0;
+
+	for (; qid_start < qid_end; qid_start++) {
+		struct sw_qid *qid = &sw->qids[qid_start];
+		int i, num_entries_in_use;
+
+		if (qid->type != RTE_SCHED_TYPE_ORDERED)
+			continue;
+
+		num_entries_in_use = rte_ring_free_count(
+					qid->reorder_buffer_freelist);
+
+		for (i = 0; i < num_entries_in_use; i++) {
+			struct reorder_buffer_entry *entry;
+			int j;
+
+			entry = &qid->reorder_buffer[qid->reorder_buffer_index];
+
+			if (!entry->ready)
+				break;
+
+			for (j = 0; j < entry->num_fragments; j++) {
+				uint16_t dest_qid;
+				uint16_t dest_iq;
+
+				int idx = entry->fragment_index + j;
+				qe = &entry->fragments[idx];
+
+				dest_qid = qe->queue_id;
+				dest_iq  = PRIO_TO_IQ(qe->priority);
+
+				if (dest_qid >= sw->qid_count) {
+					sw->stats.rx_dropped++;
+					continue;
+				}
+
+				struct sw_qid *dest_qid_ptr =
+					&sw->qids[dest_qid];
+				const struct iq_ring *dest_iq_ptr =
+					dest_qid_ptr->iq[dest_iq];
+				if (iq_ring_free_count(dest_iq_ptr) == 0)
+					break;
+
+				pkts_iter++;
+
+				struct sw_qid *q = &sw->qids[dest_qid];
+				struct iq_ring *r = q->iq[dest_iq];
+
+				/* we checked for space above, so enqueue must
+				 * succeed
+				 */
+				iq_ring_enqueue(r, qe);
+				q->iq_pkt_mask |= (1 << (dest_iq));
+				q->iq_pkt_count[dest_iq]++;
+				q->stats.rx_pkts++;
+			}
+
+			entry->ready = (j != entry->num_fragments);
+			entry->num_fragments -= j;
+			entry->fragment_index += j;
+
+			if (!entry->ready) {
+				entry->fragment_index = 0;
+
+				rte_ring_sp_enqueue(qid->reorder_buffer_freelist,
+						    entry);
+
+				qid->reorder_buffer_index++;
+				qid->reorder_buffer_index %= qid->window_size;
+			}
+		}
+	}
+	return pkts_iter;
+}
+
+static inline void __attribute__((always_inline))
+sw_refill_pp_buf(struct sw_evdev *sw, struct sw_port *port)
+{
+	RTE_SET_USED(sw);
+	struct qe_ring *worker = port->rx_worker_ring;
+	port->pp_buf_start = 0;
+	port->pp_buf_count = qe_ring_dequeue_burst(worker, port->pp_buf,
+			RTE_DIM(port->pp_buf));
+}
+
+static inline uint32_t __attribute__((always_inline))
+__pull_port_lb(struct sw_evdev *sw, uint32_t port_id, int allow_reorder)
+{
+	static const struct reorder_buffer_entry dummy_rob;
+	uint32_t pkts_iter = 0;
+	struct sw_port *port = &sw->ports[port_id];
+
+	/* If shadow ring has 0 pkts, pull from worker ring */
+	if (port->pp_buf_count == 0)
+		sw_refill_pp_buf(sw, port);
+
+	while (port->pp_buf_count) {
+		const struct rte_event *qe = &port->pp_buf[port->pp_buf_start];
+		struct sw_hist_list_entry *hist_entry = NULL;
+		uint8_t flags = qe->op;
+		const uint16_t eop = !(flags & QE_FLAG_NOT_EOP);
+		int needs_reorder = 0;
+		/* if no-reordering, having PARTIAL == NEW */
+		if (!allow_reorder && !eop)
+			flags = QE_FLAG_VALID;
+
+		/*
+		 * if we don't have space for this packet in an IQ,
+		 * then move on to next queue. Technically, for a
+		 * packet that needs reordering, we don't need to check
+		 * here, but it simplifies things not to special-case
+		 */
+		uint32_t iq_num = PRIO_TO_IQ(qe->priority);
+		struct sw_qid *qid = &sw->qids[qe->queue_id];
+
+		if ((flags & QE_FLAG_VALID) &&
+				iq_ring_free_count(qid->iq[iq_num]) == 0)
+			break;
+
+		/* now process based on flags. Note that for directed
+		 * queues, the enqueue_flush masks off all but the
+		 * valid flag. This makes FWD and PARTIAL enqueues just
+		 * NEW type, and makes DROPS no-op calls.
+		 */
+		if ((flags & QE_FLAG_COMPLETE) && port->inflights > 0) {
+			const uint32_t hist_tail = port->hist_tail &
+					(SW_PORT_HIST_LIST - 1);
+
+			hist_entry = &port->hist_list[hist_tail];
+			const uint32_t hist_qid = hist_entry->qid;
+			const uint32_t hist_fid = hist_entry->fid;
+
+			struct sw_fid_t *fid =
+				&sw->qids[hist_qid].fids[hist_fid];
+			fid->pcount -= eop;
+			if (fid->pcount == 0)
+				fid->cq = -1;
+
+			if (allow_reorder) {
+				/* set reorder ready if an ordered QID */
+				uintptr_t rob_ptr =
+					(uintptr_t)hist_entry->rob_entry;
+				const uintptr_t valid = (rob_ptr != 0);
+				needs_reorder = valid;
+				rob_ptr |=
+					((valid - 1) & (uintptr_t)&dummy_rob);
+				struct reorder_buffer_entry *tmp_rob_ptr =
+					(struct reorder_buffer_entry *)rob_ptr;
+				tmp_rob_ptr->ready = eop * needs_reorder;
+			}
+
+			port->inflights -= eop;
+			port->hist_tail += eop;
+		}
+		if (flags & QE_FLAG_VALID) {
+			port->stats.rx_pkts++;
+
+			if (allow_reorder && needs_reorder) {
+				struct reorder_buffer_entry *rob_entry =
+						hist_entry->rob_entry;
+
+				/* Although fragmentation not currently
+				 * supported by eventdev API, we support it
+				 * here. Open: How do we alert the user that
+				 * they've exceeded max frags?
+				 */
+				int num_frag = rob_entry->num_fragments;
+				if (num_frag == SW_FRAGMENTS_MAX)
+					sw->stats.rx_dropped++;
+				else {
+					int idx = rob_entry->num_fragments++;
+					rob_entry->fragments[idx] = *qe;
+				}
+				goto end_qe;
+			}
+
+			/* Use the iq_num from above to push the QE
+			 * into the qid at the right priority
+			 */
+
+			qid->iq_pkt_mask |= (1 << (iq_num));
+			iq_ring_enqueue(qid->iq[iq_num], qe);
+			qid->iq_pkt_count[iq_num]++;
+			qid->stats.rx_pkts++;
+			pkts_iter++;
+		}
+
+end_qe:
+		port->pp_buf_start++;
+		port->pp_buf_count--;
+	} /* while (avail_qes) */
+
+	return pkts_iter;
+}
+
+static uint32_t
+sw_schedule_pull_port_lb(struct sw_evdev *sw, uint32_t port_id)
+{
+	return __pull_port_lb(sw, port_id, 1);
+}
+
+static uint32_t
+sw_schedule_pull_port_no_reorder(struct sw_evdev *sw, uint32_t port_id)
+{
+	return __pull_port_lb(sw, port_id, 0);
+}
+
+static uint32_t
+sw_schedule_pull_port_dir(struct sw_evdev *sw, uint32_t port_id)
+{
+	uint32_t pkts_iter = 0;
+	struct sw_port *port = &sw->ports[port_id];
+
+	/* If shadow ring has 0 pkts, pull from worker ring */
+	if (port->pp_buf_count == 0)
+		sw_refill_pp_buf(sw, port);
+
+	while (port->pp_buf_count) {
+		const struct rte_event *qe = &port->pp_buf[port->pp_buf_start];
+		uint8_t flags = qe->op;
+
+		if ((flags & QE_FLAG_VALID) == 0)
+			goto end_qe;
+
+		uint32_t iq_num = PRIO_TO_IQ(qe->priority);
+		struct sw_qid *qid = &sw->qids[qe->queue_id];
+		struct iq_ring *iq_ring = qid->iq[iq_num];
+
+		if (iq_ring_free_count(iq_ring) == 0)
+			break; /* move to next port */
+
+		port->stats.rx_pkts++;
+
+		/* Use the iq_num from above to push the QE
+		 * into the qid at the right priority
+		 */
+		qid->iq_pkt_mask |= (1 << (iq_num));
+		iq_ring_enqueue(iq_ring, qe);
+		qid->iq_pkt_count[iq_num]++;
+		qid->stats.rx_pkts++;
+		pkts_iter++;
+
+end_qe:
+		port->pp_buf_start++;
+		port->pp_buf_count--;
+	} /* while port->pp_buf_count */
+
+	return pkts_iter;
+}
+
+void
+sw_event_schedule(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t in_pkts, out_pkts;
+	uint32_t out_pkts_total = 0, in_pkts_total = 0;
+	int32_t sched_quanta = sw->sched_quanta;
+	uint32_t i;
+
+	sw->sched_called++;
+	if (!sw->started)
+		return;
+
+	do {
+		uint32_t in_pkts_this_iteration = 0;
+
+		/* Pull from rx_ring for ports */
+		do {
+			in_pkts = 0;
+			for (i = 0; i < sw->port_count; i++)
+				/* TODO: use a function pointer in the port */
+				if (sw->ports[i].is_directed)
+					in_pkts += sw_schedule_pull_port_dir(sw, i);
+				else if (sw->ports[i].num_ordered_qids > 0)
+					in_pkts += sw_schedule_pull_port_lb(sw, i);
+				else
+					in_pkts += sw_schedule_pull_port_no_reorder(sw, i);
+
+			/* QID scan for re-ordered */
+			in_pkts += sw_schedule_reorder(sw, 0,
+					sw->qid_count);
+			in_pkts_this_iteration += in_pkts;
+		} while (in_pkts > 4 &&
+				(int)in_pkts_this_iteration < sched_quanta);
+
+		out_pkts = 0;
+		out_pkts += sw_schedule_qid_to_cq(sw);
+		out_pkts_total += out_pkts;
+		in_pkts_total += in_pkts_this_iteration;
+
+		if (in_pkts == 0 && out_pkts == 0)
+			break;
+	} while ((int)out_pkts_total < sched_quanta);
+
+	/* push all the internal buffered QEs in port->cq_ring to the
+	 * worker cores: aka, do the ring transfers batched.
+	 */
+	for (i = 0; i < sw->port_count; i++) {
+		struct qe_ring *worker = sw->ports[i].cq_worker_ring;
+		qe_ring_enqueue_burst(worker, sw->ports[i].cq_buf,
+				sw->ports[i].cq_buf_count,
+				&sw->cq_ring_space[i]);
+		sw->ports[i].cq_buf_count = 0;
+	}
+
+	sw->stats.tx_pkts += out_pkts_total;
+	sw->stats.rx_pkts += in_pkts_total;
+
+	sw->sched_no_iq_enqueues += (in_pkts_total == 0);
+	sw->sched_no_cq_enqueues += (out_pkts_total == 0);
+
+}
-- 
2.7.4

[dpdk-dev] [PATCH v2 12/15] event/sw: add start stop and close functions

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 74 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 17b5e49..e352a5c 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -406,6 +406,77 @@ sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 }
 
 static int
+sw_start(struct rte_eventdev *dev)
+{
+	unsigned int i, j;
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	/* check all ports are set up */
+	for (i = 0; i < sw->port_count; i++)
+		if (sw->ports[i].rx_worker_ring == NULL) {
+			printf("%s %d: port %d not configured\n",
+			       __func__, __LINE__, i);
+			return -1;
+		}
+
+	/* check all queues are configured and mapped to ports*/
+	for (i = 0; i < sw->qid_count; i++)
+		if (sw->qids[i].iq[0] == NULL ||
+				sw->qids[i].cq_num_mapped_cqs == 0) {
+			printf("%s %d: queue %d not configured\n",
+			       __func__, __LINE__, i);
+			return -1;
+		}
+
+	/* build up our prioritized array of qids */
+	/* We don't use qsort here, as if all/multiple entries have the same
+	 * priority, the result is non-deterministic. From "man 3 qsort":
+	 * "If two members compare as equal, their order in the sorted
+	 * array is undefined."
+	 */
+	uint32_t qidx = 0;
+	for (j = 0; j <= RTE_EVENT_DEV_PRIORITY_LOWEST; j++) {
+		for (i = 0; i < sw->qid_count; i++) {
+			if (sw->qids[i].priority == j) {
+				sw->qids_prioritized[qidx] = &sw->qids[i];
+				qidx++;
+			}
+		}
+	}
+	sw->started = 1;
+	return 0;
+}
+
+static void
+sw_stop(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	sw->started = 0;
+}
+
+static int
+sw_close(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t i;
+
+	for (i = 0; i < sw->qid_count; i++)
+		sw_queue_release(dev, i);
+	sw->qid_count = 0;
+
+	for (i = 0; i < sw->port_count; i++)
+		sw_port_release(&sw->ports[i]);
+	sw->port_count = 0;
+
+	memset(&sw->stats, 0, sizeof(sw->stats));
+	sw->sched_called = 0;
+	sw->sched_no_iq_enqueues = 0;
+	sw->sched_no_cq_enqueues = 0;
+	sw->sched_cq_qid_called = 0;
+
+	return 0;
+}
+
+static int
 assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
 {
 	int *socket_id = opaque;
@@ -441,6 +512,9 @@ sw_probe(const char *name, const char *params)
 	static const struct rte_eventdev_ops evdev_sw_ops = {
 			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
+			.dev_close = sw_close,
+			.dev_start = sw_start,
+			.dev_stop = sw_stop,
 
 			.queue_def_conf = sw_queue_def_conf,
 			.queue_setup = sw_queue_setup,
-- 
2.7.4

[dpdk-dev] [PATCH v2 13/15] event/sw: add dump function for easier debugging

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 118 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index e352a5c..6096aa4 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -405,6 +405,123 @@ sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 	*info = evdev_sw_info;
 }
 
+static void
+sw_dump(struct rte_eventdev *dev, FILE *f)
+{
+	const struct sw_evdev *sw = sw_pmd_priv(dev);
+
+	static const char * const q_type_strings[] = {
+			"Ordered", "Atomic", "Parallel", "Directed"
+	};
+	uint32_t i;
+	fprintf(f, "EventDev %s: ports %d, qids %d\n", "todo-fix-name",
+			sw->port_count, sw->qid_count);
+
+	fprintf(f, "\trx   %"PRIu64"\n\tdrop %"PRIu64"\n\ttx   %"PRIu64"\n",
+		sw->stats.rx_pkts, sw->stats.rx_dropped, sw->stats.tx_pkts);
+	fprintf(f, "\tsched calls: %"PRIu64"\n", sw->sched_called);
+	fprintf(f, "\tsched cq/qid call: %"PRIu64"\n", sw->sched_cq_qid_called);
+	fprintf(f, "\tsched no IQ enq: %"PRIu64"\n", sw->sched_no_iq_enqueues);
+	fprintf(f, "\tsched no CQ enq: %"PRIu64"\n", sw->sched_no_cq_enqueues);
+	uint32_t inflights = rte_atomic32_read(&sw->inflights);
+	uint32_t credits = sw->nb_events_limit - inflights;
+	fprintf(f, "\tinflight %d, credits: %d\n", inflights, credits);
+
+#define COL_RED "\x1b[31m"
+#define COL_RESET "\x1b[0m"
+
+	for (i = 0; i < sw->port_count; i++) {
+		int max, j;
+		const struct sw_port *p = &sw->ports[i];
+		fprintf(f, "  Port %d %s\n", i,
+			p->is_directed ? " (SingleCons)" : "");
+		fprintf(f, "\trx   %"PRIu64"\tdrop %"PRIu64"\ttx   %"PRIu64
+			"\tinflight %d\n", sw->ports[i].stats.rx_pkts,
+			sw->ports[i].stats.rx_dropped,
+			sw->ports[i].stats.tx_pkts, sw->ports[i].inflights);
+
+		fprintf(f, "\tAvg cycles PP: %"PRIu64"\tCredits: %u\n",
+			sw->ports[i].avg_pkt_ticks,
+			sw->ports[i].inflight_credits);
+		fprintf(f, "\tReceive burst distribution:\n");
+		float zp_percent = p->zero_polls * 100.0 / p->total_polls;
+		fprintf(f, zp_percent < 10 ? "\t\t0:%.02f%% " : "\t\t0:%.0f%% ",
+				zp_percent);
+		for (max = (int)RTE_DIM(p->poll_buckets); max-- > 0;)
+			if (p->poll_buckets[max] != 0)
+				break;
+		for (j = 0; j <= max; j++) {
+			if (p->poll_buckets[j] != 0) {
+				float poll_pc = p->poll_buckets[j] * 100.0 /
+					p->total_polls;
+				printf("%u-%u:%.02f%% ",
+					((j << SW_DEQ_STAT_BUCKET_SHIFT) + 1),
+					((j+1) << SW_DEQ_STAT_BUCKET_SHIFT),
+					poll_pc);
+			}
+		}
+		printf("\n");
+
+		uint64_t rx_used = qe_ring_count(p->rx_worker_ring);
+		uint64_t rx_free = qe_ring_free_count(p->rx_worker_ring);
+		const char *rxcol = (rx_free == 0) ? COL_RED : COL_RESET;
+		fprintf(f, "\t%srx ring used: %4"PRIu64"\tfree: %4"
+				PRIu64 COL_RESET"\n", rxcol, rx_used, rx_free);
+
+		uint64_t tx_used = qe_ring_count(p->cq_worker_ring);
+		uint64_t tx_free = qe_ring_free_count(p->cq_worker_ring);
+		const char *txcol = (tx_free == 0) ? COL_RED : COL_RESET;
+		fprintf(f, "\t%scq ring used: %4"PRIu64"\tfree: %4"PRIu64
+				COL_RESET"\n", txcol, tx_used, tx_free);
+	}
+
+	for (i = 0; i < sw->qid_count; i++) {
+		const struct sw_qid *qid = &sw->qids[i];
+		int affinities_per_port[SW_PORTS_MAX] = {0};
+		uint32_t inflights = 0;
+
+		fprintf(f, "  Queue %d (%s)\n", i, q_type_strings[qid->type]);
+		fprintf(f, "\trx   %"PRIu64"\tdrop %"PRIu64"\ttx   %"PRIu64"\n",
+			qid->stats.rx_pkts, qid->stats.rx_dropped,
+			qid->stats.tx_pkts);
+		if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+			struct rte_ring *rob_buf_free =
+				qid->reorder_buffer_freelist;
+			fprintf(f, "\tReorder entries in use: %u\n",
+				rte_ring_free_count(rob_buf_free));
+		}
+
+		uint32_t flow;
+		for (flow = 0; flow < RTE_DIM(qid->fids); flow++)
+			if (qid->fids[flow].cq != -1) {
+				affinities_per_port[qid->fids[flow].cq]++;
+				inflights += qid->fids[flow].pcount;
+			}
+
+		uint32_t cq;
+		fprintf(f, "\tInflights: %u\tFlows pinned per port: ",
+				inflights);
+		for (cq = 0; cq < sw->port_count; cq++)
+			fprintf(f, "%d ", affinities_per_port[cq]);
+		fprintf(f, "\n");
+
+		uint32_t iq;
+		uint32_t iq_printed = 0;
+		for (iq = 0; iq < SW_IQS_MAX; iq++) {
+			uint32_t used = iq_ring_count(qid->iq[iq]);
+			uint32_t free = iq_ring_free_count(qid->iq[iq]);
+			const char *col = (free == 0) ? COL_RED : COL_RESET;
+			if (used > 0) {
+				fprintf(f, "\t%siq %d: Used %d\tFree %d"
+					COL_RESET"\n", col, iq, used, free);
+				iq_printed = 1;
+			}
+		}
+		if (iq_printed == 0)
+			fprintf(f, "\t-- iqs empty --\n");
+	}
+}
+
 static int
 sw_start(struct rte_eventdev *dev)
 {
@@ -515,6 +632,7 @@ sw_probe(const char *name, const char *params)
 			.dev_close = sw_close,
 			.dev_start = sw_start,
 			.dev_stop = sw_stop,
+			.dump = sw_dump,
 
 			.queue_def_conf = sw_queue_def_conf,
 			.queue_setup = sw_queue_setup,
-- 
2.7.4

[dpdk-dev] [PATCH v2 14/15] event/sw: add xstats support

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add support for xstats to report out on the state of the eventdev.
Useful for debugging and for unit tests, as well as observability
at runtime and performance tuning of apps to work well with the
scheduler.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile          |   1 +
 drivers/event/sw/sw_evdev.c        |   7 +
 drivers/event/sw/sw_evdev.h        |  10 +
 drivers/event/sw/sw_evdev_xstats.c | 404 +++++++++++++++++++++++++++++++++++++
 4 files changed, 422 insertions(+)
 create mode 100644 drivers/event/sw/sw_evdev_xstats.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index a7f5b3d..eb0dc4c 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -55,6 +55,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_scheduler.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_xstats.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 6096aa4..2fb9cc4 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -559,6 +559,8 @@ sw_start(struct rte_eventdev *dev)
 			}
 		}
 	}
+	if (sw_xstats_init(sw) < 0)
+		return -1;
 	sw->started = 1;
 	return 0;
 }
@@ -567,6 +569,7 @@ static void
 sw_stop(struct rte_eventdev *dev)
 {
 	struct sw_evdev *sw = sw_pmd_priv(dev);
+	sw_xstats_uninit(sw);
 	sw->started = 0;
 }
 
@@ -642,6 +645,10 @@ sw_probe(const char *name, const char *params)
 			.port_release = sw_port_release,
 			.port_link = sw_port_link,
 			.port_unlink = sw_port_unlink,
+
+			.get_xstat_names = sw_get_xstat_names,
+			.get_xstats = sw_get_xstats,
+			.get_xstat_by_name = sw_get_xstat_by_name,
 	};
 
 	static const char *const args[] = {
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 63b0979..93bc8b5 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -222,6 +222,8 @@ struct sw_evdev {
 
 	uint32_t port_count;
 	uint32_t qid_count;
+	uint32_t xstats_count;
+	struct sw_xstats_entry *xstats;
 
 	/* Contains all ports - load balanced and directed */
 	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
@@ -277,5 +279,13 @@ uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
 uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
 			uint64_t wait);
 void sw_event_schedule(struct rte_eventdev *dev);
+int sw_xstats_init(struct sw_evdev *dev);
+int sw_xstats_uninit(struct sw_evdev *dev);
+int sw_get_xstat_names(const struct rte_eventdev *dev,
+	struct rte_event_dev_xstat_name *xstats_names, unsigned int size);
+int sw_get_xstats(const struct rte_eventdev *dev, const unsigned int ids[],
+	uint64_t values[], unsigned int n);
+uint64_t sw_get_xstat_by_name(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id);
 
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_xstats.c b/drivers/event/sw/sw_evdev_xstats.c
new file mode 100644
index 0000000..569eba2
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_xstats.c
@@ -0,0 +1,404 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "sw_evdev.h"
+#include "iq_ring.h"
+#include "event_ring.h"
+
+enum xstats_type {
+	/* common stats */
+	rx,
+	tx,
+	dropped,
+	inflight,
+	calls,
+	credits,
+	/* device instance specific */
+	no_iq_enq,
+	no_cq_enq,
+	/* port_specific */
+	rx_used,
+	rx_free,
+	tx_used,
+	tx_free,
+	pkt_cycles,
+	poll_return, /* for zero-count and used also for port bucket loop */
+	/* qid_specific */
+	iq_size,
+	iq_used,
+	/* qid port mapping specific */
+	pinned,
+};
+
+typedef uint64_t (*xstats_fn)(const struct sw_evdev *dev,
+		uint16_t obj_idx, /* port or queue id */
+		enum xstats_type stat, int extra_arg);
+
+struct sw_xstats_entry {
+	struct rte_event_dev_xstat_name name;
+	xstats_fn fn;
+	uint16_t obj_idx;
+	enum xstats_type stat;
+	int extra_arg;
+};
+
+static uint64_t
+get_dev_stat(const struct sw_evdev *sw, uint16_t obj_idx __rte_unused,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	switch (type) {
+	case rx: return sw->stats.rx_pkts;
+	case tx: return sw->stats.tx_pkts;
+	case dropped: return sw->stats.rx_dropped;
+	case calls: return sw->sched_called;
+	case no_iq_enq: return sw->sched_no_iq_enqueues;
+	case no_cq_enq: return sw->sched_no_cq_enqueues;
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_port_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	const struct sw_port *p = &sw->ports[obj_idx];
+
+	switch (type) {
+	case rx: return p->stats.rx_pkts;
+	case tx: return p->stats.tx_pkts;
+	case dropped: return p->stats.rx_dropped;
+	case inflight: return p->inflights;
+	case pkt_cycles: return p->avg_pkt_ticks;
+	case calls: return p->total_polls;
+	case credits: return p->inflight_credits;
+	case poll_return: return p->zero_polls;
+	case rx_used: return qe_ring_count(p->rx_worker_ring);
+	case rx_free: return qe_ring_free_count(p->rx_worker_ring);
+	case tx_used: return qe_ring_count(p->cq_worker_ring);
+	case tx_free: return qe_ring_free_count(p->cq_worker_ring);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_port_bucket_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_port *p = &sw->ports[obj_idx];
+
+	switch (type) {
+	case poll_return: return p->poll_buckets[extra_arg];
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+
+	switch (type) {
+	case rx: return qid->stats.rx_pkts;
+	case tx: return qid->stats.tx_pkts;
+	case dropped: return qid->stats.rx_dropped;
+	case inflight:
+		do {
+			uint64_t infl = 0;
+			unsigned int i;
+			for (i = 0; i < RTE_DIM(qid->fids); i++)
+				infl += qid->fids[i].pcount;
+			return infl;
+		} while (0);
+		break;
+	case iq_size: return RTE_DIM(qid->iq[0]->ring);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_iq_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+	const int iq_idx = extra_arg;
+
+	switch (type) {
+	case iq_used: return iq_ring_count(qid->iq[iq_idx]);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_port_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+	uint16_t port = extra_arg;
+
+	switch (type) {
+	case pinned:
+		do {
+			uint64_t pin = 0;
+			unsigned int i;
+			for (i = 0; i < RTE_DIM(qid->fids); i++)
+				if (qid->fids[i].cq == port)
+					pin++;
+			return pin;
+		} while (0);
+		break;
+	default: return -1;
+	}
+}
+
+int
+sw_xstats_init(struct sw_evdev *sw)
+{
+	/*
+	 * define the stats names and types. Used to build up the device
+	 * xstats array
+	 * There are multiple set of stats:
+	 *   - device-level,
+	 *   - per-port,
+	 *   - per-port-dequeue-burst-sizes
+	 *   - per-qid,
+	 *   - per-iq
+	 *   - per-port-per-qid
+	 *
+	 * For each of these sets, we have two parallel arrays, one for the
+	 * names, the other for the stat type parameter to be passed in the fn
+	 * call to get that stat. These two arrays must be kept in sync
+	 */
+	static const char * const dev_stats[] = { "rx", "tx", "drop",
+			"sched_calls", "sched_no_iq_enq", "sched_no_cq_enq",
+	};
+	static const enum xstats_type dev_types[] = { rx, tx, dropped,
+			calls, no_iq_enq, no_cq_enq,
+	};
+
+	static const char * const port_stats[] = {"rx", "tx", "drop",
+			"inflight", "avg_pkt_cycles", "credits",
+			"rx_ring_used", "rx_ring_free",
+			"cq_ring_used", "cq_ring_free",
+			"dequeue_calls", "dequeues_returning_0",
+	};
+	static const enum xstats_type port_types[] = { rx, tx, dropped,
+			inflight, pkt_cycles, credits,
+			rx_used, rx_free, tx_used, tx_free,
+			calls, poll_return,
+	};
+
+	static const char * const port_bucket_stats[] = {
+			"dequeues_returning" };
+	static const enum xstats_type port_bucket_types[] = { poll_return };
+
+	static const char * const qid_stats[] = {"rx", "tx", "drop",
+			"inflight", "iq_size"
+	};
+	static const enum xstats_type qid_types[] = { rx, tx, dropped, inflight,
+			iq_size
+	};
+
+	static const char * const qid_iq_stats[] = { "used" };
+	static const enum xstats_type qid_iq_types[] = { iq_used };
+
+	static const char * const qid_port_stats[] = { "pinned_flows" };
+	static const enum xstats_type qid_port_types[] = { pinned };
+	/* ---- end of stat definitions ---- */
+
+	/* check sizes, since a missed comma can lead to strings being
+	 * joined by the compiler.
+	 */
+	RTE_BUILD_BUG_ON(RTE_DIM(dev_stats) != RTE_DIM(dev_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(port_stats) != RTE_DIM(port_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_stats) != RTE_DIM(qid_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_iq_stats) != RTE_DIM(qid_iq_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_port_stats) != RTE_DIM(qid_port_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(port_bucket_stats) !=
+			RTE_DIM(port_bucket_types));
+
+	/* other vars */
+	const unsigned int count = RTE_DIM(dev_stats) +
+			sw->port_count * RTE_DIM(port_stats) +
+			sw->port_count * RTE_DIM(port_bucket_stats) *
+				((MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT) + 1) +
+			sw->qid_count * RTE_DIM(qid_stats) +
+			sw->qid_count * SW_IQS_MAX * RTE_DIM(qid_iq_stats) +
+			sw->qid_count * sw->port_count * RTE_DIM(qid_port_stats);
+	unsigned int i, port, qid, iq, bkt, stat = 0;
+
+	sw->xstats = rte_zmalloc_socket(NULL, sizeof(sw->xstats[0]) * count, 0,
+			sw->data->socket_id);
+	if (sw->xstats == NULL)
+		return -ENOMEM;
+
+#define sname sw->xstats[stat].name.name
+	for (i = 0; i < RTE_DIM(dev_stats); i++, stat++) {
+		sw->xstats[stat] = (struct sw_xstats_entry){
+			.fn = get_dev_stat,
+			.stat = dev_types[i],
+		};
+		snprintf(sname, sizeof(sname), "dev_%s", dev_stats[i]);
+	}
+
+	for (port = 0; port < sw->port_count; port++) {
+		for (i = 0; i < RTE_DIM(port_stats); i++, stat++) {
+			sw->xstats[stat] = (struct sw_xstats_entry){
+				.fn = get_port_stat,
+				.obj_idx = port,
+				.stat = port_types[i],
+			};
+			snprintf(sname, sizeof(sname), "port_%u_%s",
+					port, port_stats[i]);
+		}
+
+		for (bkt = 0; bkt < (sw->ports[port].cq_worker_ring->size >>
+				SW_DEQ_STAT_BUCKET_SHIFT) + 1; bkt++) {
+			for (i = 0; i < RTE_DIM(port_bucket_stats); i++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_port_bucket_stat,
+					.obj_idx = port,
+					.stat = port_bucket_types[i],
+					.extra_arg = bkt,
+				};
+				snprintf(sname, sizeof(sname),
+					"port_%u_%s_%u-%u",
+					port, port_bucket_stats[i],
+					(bkt << SW_DEQ_STAT_BUCKET_SHIFT) + 1,
+					(bkt + 1) << SW_DEQ_STAT_BUCKET_SHIFT);
+				stat++;
+			}
+		}
+	}
+
+	for (qid = 0; qid < sw->qid_count; qid++) {
+		for (i = 0; i < RTE_DIM(qid_stats); i++, stat++) {
+			sw->xstats[stat] = (struct sw_xstats_entry){
+				.fn = get_qid_stat,
+				.obj_idx = qid,
+				.stat = qid_types[i],
+			};
+			snprintf(sname, sizeof(sname), "qid_%u_%s",
+					qid, qid_stats[i]);
+		}
+		for (iq = 0; iq < SW_IQS_MAX; iq++)
+			for (i = 0; i < RTE_DIM(qid_iq_stats); i++, stat++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_qid_iq_stat,
+					.obj_idx = qid,
+					.stat = qid_iq_types[i],
+					.extra_arg = iq
+				};
+				snprintf(sname, sizeof(sname),
+						"qid_%u_iq_%u_%s",
+						qid, iq,
+						qid_iq_stats[i]);
+			}
+
+		for (port = 0; port < sw->port_count; port++)
+			for (i = 0; i < RTE_DIM(qid_port_stats); i++, stat++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_qid_port_stat,
+					.obj_idx = qid,
+					.stat = qid_port_types[i],
+					.extra_arg = port
+				};
+				snprintf(sname, sizeof(sname),
+						"qid_%u_port_%u_%s",
+						qid, port,
+						qid_port_stats[i]);
+			}
+	}
+#undef sname
+
+	sw->xstats_count = stat;
+
+	return stat;
+}
+
+int
+sw_xstats_uninit(struct sw_evdev *sw)
+{
+	rte_free(sw->xstats);
+	sw->xstats_count = 0;
+	return 0;
+}
+
+int
+sw_get_xstat_names(const struct rte_eventdev *dev,
+	struct rte_event_dev_xstat_name *xstats_names, unsigned int size)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+
+	for (i = 0; i < sw->xstats_count && i < size; i++)
+		xstats_names[i] = sw->xstats[i].name;
+	return sw->xstats_count;
+}
+
+int
+sw_get_xstats(const struct rte_eventdev *dev, const unsigned int ids[],
+	uint64_t values[], unsigned int n)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+
+	for (i = 0; i < n; i++) {
+		struct sw_xstats_entry *xs = &sw->xstats[ids[i]];
+		if (ids[i] > sw->xstats_count)
+			continue;
+		values[i] = xs->fn(sw, xs->obj_idx, xs->stat, xs->extra_arg);
+	}
+
+	return i;
+}
+
+uint64_t
+sw_get_xstat_by_name(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+
+	for (i = 0; i < sw->xstats_count; i++) {
+		struct sw_xstats_entry *xs = &sw->xstats[i];
+		if (strncmp(xs->name.name, name,
+				RTE_EVENT_DEV_XSTAT_NAME_SIZE) == 0){
+			if (id != NULL)
+				*id = i;
+			return xs->fn(sw, xs->obj_idx, xs->stat, xs->extra_arg);
+		}
+	}
+	if (id != NULL)
+		*id = (uint32_t)-1;
+	return (uint64_t)-1;
+}
-- 
2.7.4

[dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Since the sw driver is a standalone lookaside device that has no HW
requirements, we can provide a set of unit tests that test its
functionality across the different queue types and with different input
scenarios.

This also adds the tests to be automatically run by autotest.py

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 app/test/Makefile           |    5 +-
 app/test/autotest_data.py   |   26 +
 app/test/test_sw_eventdev.c | 2071 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 2101 insertions(+), 1 deletion(-)
 create mode 100644 app/test/test_sw_eventdev.c

diff --git a/app/test/Makefile b/app/test/Makefile
index e28c079..1770c09 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -197,7 +197,10 @@ SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_perf.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
 
-SRCS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += test_eventdev.c
+ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
+SRCS-y += test_eventdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += test_sw_eventdev.c
+endif
 
 SRCS-$(CONFIG_RTE_LIBRTE_KVARGS) += test_kvargs.c
 
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 0cd598b..165ed6c 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -346,6 +346,32 @@ def per_sockets(num):
 non_parallel_test_group_list = [
 
     {
+        "Prefix":    "eventdev",
+        "Memory":    "512",
+        "Tests":
+        [
+            {
+                "Name":    "Eventdev common autotest",
+                "Command": "eventdev_common_autotest",
+                "Func":    default_autotest,
+                "Report":  None,
+            },
+        ]
+    },
+    {
+        "Prefix":    "eventdev_sw",
+        "Memory":    "512",
+        "Tests":
+        [
+            {
+                "Name":    "Eventdev sw autotest",
+                "Command": "eventdev_sw_autotest",
+                "Func":    default_autotest,
+                "Report":  None,
+            },
+        ]
+    },
+    {
         "Prefix":    "kni",
         "Memory":    "512",
         "Tests":
diff --git a/app/test/test_sw_eventdev.c b/app/test/test_sw_eventdev.c
new file mode 100644
index 0000000..6322f36
--- /dev/null
+++ b/app/test/test_sw_eventdev.c
@@ -0,0 +1,2071 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/queue.h>
+
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+
+#include <rte_eventdev.h>
+#include "test.h"
+
+#define MAX_PORTS 16
+#define MAX_QIDS 16
+#define NUM_PACKETS (1<<18)
+
+static int evdev;
+
+struct test {
+	struct rte_mempool *mbuf_pool;
+	uint8_t port[MAX_PORTS];
+	uint8_t qid[MAX_QIDS];
+	int nb_qids;
+};
+
+static struct rte_event release_ev = {.op = RTE_EVENT_OP_RELEASE };
+
+static inline struct rte_mbuf *
+rte_gen_arp(int portid, struct rte_mempool *mp)
+{
+	/*
+	* len = 14 + 46
+	* ARP, Request who-has 10.0.0.1 tell 10.0.0.2, length 46
+	*/
+	static const uint8_t arp_request[] = {
+		/*0x0000:*/ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xa8,
+		0x6b, 0xfd, 0x02, 0x29, 0x08, 0x06, 0x00, 0x01,
+		/*0x0010:*/ 0x08, 0x00, 0x06, 0x04, 0x00, 0x01, 0xec, 0xa8,
+		0x6b, 0xfd, 0x02, 0x29, 0x0a, 0x00, 0x00, 0x01,
+		/*0x0020:*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00,
+		0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		/*0x0030:*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00
+	};
+	struct rte_mbuf *m;
+	int pkt_len = sizeof(arp_request) - 1;
+
+	m = rte_pktmbuf_alloc(mp);
+	if (!m)
+		return 0;
+
+	memcpy((void *)((uintptr_t)m->buf_addr + m->data_off),
+		arp_request, pkt_len);
+	rte_pktmbuf_pkt_len(m) = pkt_len;
+	rte_pktmbuf_data_len(m) = pkt_len;
+
+	RTE_SET_USED(portid);
+
+	return m;
+}
+
+/* initialization and config */
+static inline int
+init(struct test *t, int nb_queues, int nb_ports)
+{
+	struct rte_event_dev_config config = {
+			.nb_event_queues = nb_queues,
+			.nb_event_ports = nb_ports,
+			.nb_event_queue_flows = 1024,
+			.nb_events_limit = 4096,
+			.nb_event_port_dequeue_depth = 128,
+			.nb_event_port_enqueue_depth = 128,
+	};
+	int ret;
+
+	void *temp = t->mbuf_pool; /* save and restore mbuf pool */
+
+	memset(t, 0, sizeof(*t));
+	t->mbuf_pool = temp;
+
+	ret = rte_event_dev_configure(evdev, &config);
+	if (ret < 0)
+		printf("%d: Error configuring device\n", __LINE__);
+	return ret;
+};
+
+static inline int
+create_ports(struct test *t, int num_ports)
+{
+	int i;
+	static const struct rte_event_port_conf conf = {
+			.new_event_threshold = 1024,
+			.dequeue_depth = 32,
+			.enqueue_depth = 64,
+	};
+	if (num_ports > MAX_PORTS)
+		return -1;
+
+	for (i = 0; i < num_ports; i++) {
+		if (rte_event_port_setup(evdev, i, &conf) < 0) {
+			printf("Error setting up port %d\n", i);
+			return -1;
+		}
+		t->port[i] = i;
+	}
+
+	return 0;
+}
+
+static inline int
+create_lb_qids(struct test *t, int num_qids, uint32_t flags)
+{
+	int i;
+
+	/* Q creation */
+	const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = flags,
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+	};
+
+	for (i = t->nb_qids; i < t->nb_qids + num_qids; i++) {
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+	}
+	t->nb_qids += num_qids;
+	if (t->nb_qids > MAX_QIDS)
+		return -1;
+
+	return 0;
+}
+
+static inline int
+create_atomic_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY);
+}
+
+static inline int
+create_ordered_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_ORDERED_ONLY);
+}
+
+
+static inline int
+create_unordered_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY);
+}
+
+static inline int
+create_directed_qids(struct test *t, int num_qids, const uint8_t ports[])
+{
+	int i;
+
+	/* Q creation */
+	static const struct rte_event_queue_conf conf = {
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_SINGLE_LINK,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+	};
+
+	for (i = t->nb_qids; i < t->nb_qids + num_qids; i++) {
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+
+		if (rte_event_port_link(evdev, ports[i - t->nb_qids],
+				&t->qid[i], NULL, 1) != 1) {
+			printf("%d: error creating link for qid %d\n",
+					__LINE__, i);
+			return -1;
+		}
+	}
+	t->nb_qids += num_qids;
+	if (t->nb_qids > MAX_QIDS)
+		return -1;
+
+	return 0;
+}
+
+/* destruction */
+static inline int
+cleanup(struct test *t __rte_unused)
+{
+	rte_event_dev_stop(evdev);
+	rte_event_dev_close(evdev);
+	return 0;
+};
+
+struct test_event_dev_stats {
+	uint64_t rx_pkts;       /**< Total packets received */
+	uint64_t rx_dropped;    /**< Total packets dropped (Eg Invalid QID) */
+	uint64_t tx_pkts;       /**< Total packets transmitted */
+
+	/** Packets received on this port */
+	uint64_t port_rx_pkts[MAX_PORTS];
+	/** Packets dropped on this port */
+	uint64_t port_rx_dropped[MAX_PORTS];
+	/** Packets inflight on this port */
+	uint64_t port_inflight[MAX_PORTS];
+	/** Packets transmitted on this port */
+	uint64_t port_tx_pkts[MAX_PORTS];
+	/** Packets received on this qid */
+	uint64_t qid_rx_pkts[MAX_QIDS];
+	/** Packets dropped on this qid */
+	uint64_t qid_rx_dropped[MAX_QIDS];
+	/** Packets transmitted on this qid */
+	uint64_t qid_tx_pkts[MAX_QIDS];
+};
+
+static inline int
+test_event_dev_stats_get(int dev_id, struct test_event_dev_stats *stats)
+{
+	static uint32_t i;
+	static uint32_t total_ids[3]; /* rx, tx and drop */
+	static uint32_t port_rx_pkts_ids[MAX_PORTS];
+	static uint32_t port_rx_dropped_ids[MAX_PORTS];
+	static uint32_t port_inflight_ids[MAX_PORTS];
+	static uint32_t port_tx_pkts_ids[MAX_PORTS];
+	static uint32_t qid_rx_pkts_ids[MAX_QIDS];
+	static uint32_t qid_rx_dropped_ids[MAX_QIDS];
+	static uint32_t qid_tx_pkts_ids[MAX_QIDS];
+
+
+	stats->rx_pkts = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_rx", &total_ids[0]);
+	stats->rx_dropped = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_drop", &total_ids[1]);
+	stats->tx_pkts = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_tx", &total_ids[2]);
+	for (i = 0; i < MAX_PORTS; i++) {
+		char name[32];
+		snprintf(name, sizeof(name), "port_%u_rx", i);
+		stats->port_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_rx_pkts_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_drop", i);
+		stats->port_rx_dropped[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_rx_dropped_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_inflight", i);
+		stats->port_inflight[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_inflight_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_tx", i);
+		stats->port_tx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_tx_pkts_ids[i]);
+	}
+	for (i = 0; i < MAX_QIDS; i++) {
+		char name[32];
+		snprintf(name, sizeof(name), "qid_%u_rx", i);
+		stats->qid_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_rx_pkts_ids[i]);
+		snprintf(name, sizeof(name), "qid_%u_drop", i);
+		stats->qid_rx_dropped[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_rx_dropped_ids[i]);
+		snprintf(name, sizeof(name), "qid_%u_tx", i);
+		stats->qid_tx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_tx_pkts_ids[i]);
+	}
+
+	return 0;
+}
+
+/* run_prio_packet_test
+ * This performs a basic packet priority check on the test instance passed in.
+ * It is factored out of the main priority tests as the same tests must be
+ * performed to ensure prioritization of each type of QID.
+ *
+ * Requirements:
+ *  - An initialized test structure, including mempool
+ *  - t->port[0] is initialized for both Enq / Deq of packets to the QID
+ *  - t->qid[0] is the QID to be tested
+ *  - if LB QID, the CQ must be mapped to the QID.
+ */
+static int
+run_prio_packet_test(struct test *t)
+{
+	int err;
+	const uint32_t MAGIC_SEQN[] = {4711, 1234};
+	const uint32_t PRIORITY[] = {3, 0};
+	unsigned int i;
+	for (i = 0; i < RTE_DIM(MAGIC_SEQN); i++) {
+		/* generate pkt and enqueue */
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->seqn = MAGIC_SEQN[i];
+
+		ev = (struct rte_event){
+			.priority = PRIORITY[i],
+			.op = RTE_EVENT_OP_NEW,
+			.queue_id = t->qid[0],
+			.mbuf = arp
+		};
+		err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err < 0) {
+			printf("%d: error failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: error failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_rx_pkts[t->port[0]] != 2) {
+		printf("%d: error stats incorrect for directed port\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	struct rte_event ev, ev2;
+	uint32_t deq_pkts;
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[0], &ev, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (ev.mbuf->seqn != MAGIC_SEQN[1]) {
+		printf("%d: first packet out not highest priority\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	rte_pktmbuf_free(ev.mbuf);
+
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[0], &ev2, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (ev2.mbuf->seqn != MAGIC_SEQN[0]) {
+		printf("%d: second packet out not lower priority\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	rte_pktmbuf_free(ev2.mbuf);
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+test_single_directed_packet(struct test *t)
+{
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 3 directed QIDs going to 3 ports */
+	if (init(t, 3, 3) < 0 ||
+			create_ports(t, 3) < 0 ||
+			create_directed_qids(t, 3, t->port) < 0)
+		return -1;
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+	struct rte_event ev = {
+			.op = RTE_EVENT_OP_NEW,
+			.queue_id = wrk_enq,
+			.mbuf = arp,
+	};
+
+	if (!arp) {
+		printf("%d: gen of pkt failed\n", __LINE__);
+		return -1;
+	}
+
+	const uint32_t MAGIC_SEQN = 4711;
+	arp->seqn = MAGIC_SEQN;
+
+	/* generate pkt and enqueue */
+	err = rte_event_enqueue_burst(evdev, rx_enq, &ev, 1);
+	if (err < 0) {
+		printf("%d: error failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	/* Run schedule() as dir packets may need to be re-ordered */
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: error failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_rx_pkts[rx_enq] != 1) {
+		printf("%d: error stats incorrect for directed port\n",
+				__LINE__);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+	deq_pkts = rte_event_dequeue_burst(evdev, wrk_enq, &ev, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_rx_pkts[wrk_enq] != 0 &&
+			stats.port_rx_pkts[wrk_enq] != 1) {
+		printf("%d: error directed stats post-dequeue\n", __LINE__);
+		return -1;
+	}
+
+	if (ev.mbuf->seqn != MAGIC_SEQN) {
+		printf("%d: error magic sequence number not dequeued\n",
+				__LINE__);
+		return -1;
+	}
+
+	rte_pktmbuf_free(ev.mbuf);
+	cleanup(t);
+	return 0;
+}
+
+
+static int
+test_priority_directed(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_directed_qids(t, 1, t->port) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_atomic(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_ordered(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_ordered_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_unordered(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_unordered_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+burst_packets(struct test *t)
+{
+	/************** CONFIG ****************/
+	uint32_t i;
+	int err;
+	int ret;
+
+	/* Create instance with 2 ports and 2 queues */
+	if (init(t, 2, 2) < 0 ||
+			create_ports(t, 2) < 0 ||
+			create_atomic_qids(t, 2) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	ret = rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1);
+	if (ret != 1) {
+		printf("%d: error mapping lb qid0\n", __LINE__);
+		return -1;
+	}
+	ret = rte_event_port_link(evdev, t->port[1], &t->qid[1], NULL, 1);
+	if (ret != 1) {
+		printf("%d: error mapping lb qid1\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	const uint32_t rx_port = 0;
+	const uint32_t NUM_PKTS = 2;
+
+	for (i = 0; i < NUM_PKTS; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: error generating pkt\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = i % 2,
+				.flow_id = i % 3,
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_port], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+	rte_event_schedule(evdev);
+
+	/* Check stats for all NUM_PKTS arrived to sched core */
+	struct test_event_dev_stats stats;
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+	if (stats.rx_pkts != NUM_PKTS || stats.tx_pkts != NUM_PKTS) {
+		printf("%d: Sched core didn't receive all %d pkts\n",
+				__LINE__, NUM_PKTS);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+	int p;
+
+	deq_pkts = 0;
+	/******** DEQ QID 1 *******/
+	do {
+		struct rte_event ev;
+		p = rte_event_dequeue_burst(evdev, t->port[0], &ev, 1, 0);
+		deq_pkts += p;
+		rte_pktmbuf_free(ev.mbuf);
+	} while (p);
+
+	if (deq_pkts != NUM_PKTS/2) {
+		printf("%d: Half of NUM_PKTS didn't arrive at port 1\n",
+				__LINE__);
+		return -1;
+	}
+
+	/******** DEQ QID 2 *******/
+	deq_pkts = 0;
+	do {
+		struct rte_event ev;
+		p = rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0);
+		deq_pkts += p;
+		rte_pktmbuf_free(ev.mbuf);
+	} while (p);
+	if (deq_pkts != NUM_PKTS/2) {
+		printf("%d: Half of NUM_PKTS didn't arrive at port 2\n",
+				__LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+abuse_inflights(struct test *t)
+{
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* Enqueue op only */
+	err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &release_ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.rx_pkts != 0 ||
+			stats.tx_pkts != 0 ||
+			stats.port_inflight[wrk_enq] != 0) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+qid_priorities(struct test *t)
+{
+	/* Test works by having a CQ with enough empty space for all packets,
+	 * and enqueueing 3 packets to 3 QIDs. They must return based on the
+	 * priority of the QID, not the ingress order, to pass the test
+	 */
+	unsigned int i;
+	/* Create instance with 1 ports, and 3 qids */
+	if (init(t, 3, 1) < 0 ||
+			create_ports(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	for (i = 0; i < 3; i++) {
+		/* Create QID */
+		const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+			/* increase priority (0 == highest), as we go */
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL - i,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+		};
+
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+	}
+	t->nb_qids = i;
+	/* map all QIDs to port */
+	rte_event_port_link(evdev, t->port[0], NULL, NULL, 0);
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* enqueue 3 packets, setting seqn and QID to check priority */
+	for (i = 0; i < 3; i++) {
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		ev.queue_id = t->qid[i];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		arp->seqn = i;
+
+		int err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	/* dequeue packets, verify priority was upheld */
+	struct rte_event ev[32];
+	uint32_t deq_pkts =
+		rte_event_dequeue_burst(evdev, t->port[0], ev, 32, 0);
+	if (deq_pkts != 3) {
+		printf("%d: failed to deq packets\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	for (i = 0; i < 3; i++) {
+		if (ev[i].mbuf->seqn != 2-i) {
+			printf(
+				"%d: qid priority test: seqn %d incorrectly prioritized\n",
+					__LINE__, i);
+		}
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+load_balancing(struct test *t)
+{
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	for (i = 0; i < 3; i++) {
+		/* map port 1 - 3 inclusive */
+		if (rte_event_port_link(evdev, t->port[i+1], &t->qid[0],
+				NULL, 1) != 1) {
+			printf("%d: error mapping qid to port %d\n",
+					__LINE__, i);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	/*
+	 * Create a set of flows that test the load-balancing operation of the
+	 * implementation. Fill CQ 0 and 1 with flows 0 and 1, and test
+	 * with a new flow, which should be sent to the 3rd mapped CQ
+	 */
+	static uint32_t flows[] = {0, 1, 1, 0, 0, 2, 2, 0, 2};
+
+	for (i = 0; i < RTE_DIM(flows); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.flow_id = flows[i],
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_inflight[1] != 4) {
+		printf("%d:%s: port 1 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+	if (stats.port_inflight[2] != 2) {
+		printf("%d:%s: port 2 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+	if (stats.port_inflight[3] != 3) {
+		printf("%d:%s: port 3 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+load_balancing_history(struct test *t)
+{
+	struct test_event_dev_stats stats = {0};
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	/* Create instance with 1 atomic QID going to 3 ports + 1 prod port */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0)
+		return -1;
+
+	/* CQ mapping to QID */
+	if (rte_event_port_link(evdev, t->port[1], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 1 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_port_link(evdev, t->port[2], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 2 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_port_link(evdev, t->port[3], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 3 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Create a set of flows that test the load-balancing operation of the
+	 * implementation. Fill CQ 0, 1 and 2 with flows 0, 1 and 2, drop
+	 * the packet from CQ 0, send in a new set of flows. Ensure that:
+	 *  1. The new flow 3 gets into the empty CQ0
+	 *  2. packets for existing flow gets added into CQ1
+	 *  3. Next flow 0 pkt is now onto CQ2, since CQ0 and CQ1 now contain
+	 *     more outstanding pkts
+	 *
+	 *  This test makes sure that when a flow ends (i.e. all packets
+	 *  have been completed for that flow), that the flow can be moved
+	 *  to a different CQ when new packets come in for that flow.
+	 */
+	static uint32_t flows1[] = {0, 1, 1, 2};
+
+	for (i = 0; i < RTE_DIM(flows1); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		struct rte_event ev = {
+				.flow_id = flows1[i],
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.event_type = RTE_EVENT_TYPE_CPU,
+				.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+				.mbuf = arp
+		};
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->hash.rss = flows1[i];
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	/* Dequeue the flow 0 packet from port 1, so that we can then drop */
+	struct rte_event ev;
+	if (!rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0)) {
+		printf("%d: failed to dequeue\n", __LINE__);
+		return -1;
+	}
+	if (ev.mbuf->hash.rss != flows1[0]) {
+		printf("%d: unexpected flow received\n", __LINE__);
+		return -1;
+	}
+
+	/* drop the flow 0 packet from port 1 */
+	rte_event_enqueue_burst(evdev, t->port[1], &release_ev, 1);
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	/*
+	 * Set up the next set of flows, first a new flow to fill up
+	 * CQ 0, so that the next flow 0 packet should go to CQ2
+	 */
+	static uint32_t flows2[] = { 3, 3, 3, 1, 1, 0 };
+
+	for (i = 0; i < RTE_DIM(flows2); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		struct rte_event ev = {
+				.flow_id = flows2[i],
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.event_type = RTE_EVENT_TYPE_CPU,
+				.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+				.mbuf = arp
+		};
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->hash.rss = flows2[i];
+
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d:failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Now check the resulting inflights on each port.
+	 */
+	if (stats.port_inflight[1] != 3) {
+		printf("%d:%s: port 1 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+	if (stats.port_inflight[2] != 4) {
+		printf("%d:%s: port 2 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+	if (stats.port_inflight[3] != 2) {
+		printf("%d:%s: port 3 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+
+	for (i = 1; i <= 3; i++) {
+		struct rte_event ev;
+		while (rte_event_dequeue_burst(evdev, i, &ev, 1, 0))
+			rte_event_enqueue_burst(evdev, i, &release_ev, 1);
+	}
+	rte_event_schedule(evdev);
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+invalid_qid(struct test *t)
+{
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	for (i = 0; i < 4; i++) {
+		err = rte_event_port_link(evdev, t->port[i], &t->qid[0],
+				NULL, 1);
+		if (err != 1) {
+			printf("%d: error mapping port 1 qid\n", __LINE__);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Send in a packet with an invalid qid to the scheduler.
+	 * We should see the packed enqueued OK, but the inflights for
+	 * that packet should not be incremented, and the rx_dropped
+	 * should be incremented.
+	 */
+	static uint32_t flows1[] = {20};
+
+	for (i = 0; i < RTE_DIM(flows1); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0] + flows1[i],
+				.flow_id = i,
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Now check the resulting inflights on the port, and the rx_dropped.
+	 */
+	if (stats.port_inflight[0] != 0) {
+		printf("%d:%s: port 1 inflight count not correct\n", __LINE__,
+				__func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (stats.port_rx_dropped[0] != 1) {
+		printf("%d:%s: port 1 drops\n", __LINE__, __func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	/* each packet drop should only be counted in one place - port or dev */
+	if (stats.rx_dropped != 0) {
+		printf("%d:%s: port 1 dropped count not correct\n", __LINE__,
+				__func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+single_packet(struct test *t)
+{
+	const uint32_t MAGIC_SEQN = 7321;
+	struct rte_event ev;
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** Gen pkt and enqueue ****************/
+	struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+	if (!arp) {
+		printf("%d: gen of pkt failed\n", __LINE__);
+		return -1;
+	}
+
+	ev.op = RTE_EVENT_OP_NEW;
+	ev.priority = RTE_EVENT_DEV_PRIORITY_NORMAL;
+	ev.mbuf = arp;
+	ev.queue_id = 0;
+	ev.flow_id = 3;
+	arp->seqn = MAGIC_SEQN;
+
+	err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.rx_pkts != 1 ||
+			stats.tx_pkts != 1 ||
+			stats.port_inflight[wrk_enq] != 1) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[wrk_enq], &ev, 1, 0);
+	if (deq_pkts < 1) {
+		printf("%d: Failed to deq\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (ev.mbuf->seqn != MAGIC_SEQN) {
+		printf("%d: magic sequence number not dequeued\n", __LINE__);
+		return -1;
+	}
+
+	rte_pktmbuf_free(ev.mbuf);
+	err = rte_event_enqueue_burst(evdev, t->port[wrk_enq], &release_ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[wrk_enq] != 0) {
+		printf("%d: port inflight not correct\n", __LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+inflight_counts(struct test *t)
+{
+	struct rte_event ev;
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	const int p1 = 1;
+	const int p2 = 2;
+	int err;
+	int i;
+
+	/* Create instance with 4 ports */
+	if (init(t, 2, 3) < 0 ||
+			create_ports(t, 3) < 0 ||
+			create_atomic_qids(t, 2) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[p1], &t->qid[0], NULL, 1);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+	err = rte_event_port_link(evdev, t->port[p2], &t->qid[1], NULL, 1);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+#define QID1_NUM 5
+	for (i = 0; i < QID1_NUM; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			goto err;
+		}
+
+		ev.queue_id =  t->qid[0];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			goto err;
+		}
+	}
+#define QID2_NUM 3
+	for (i = 0; i < QID2_NUM; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			goto err;
+		}
+		ev.queue_id =  t->qid[1];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			goto err;
+		}
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		goto err;
+	}
+
+	if (stats.rx_pkts != QID1_NUM + QID2_NUM ||
+			stats.tx_pkts != QID1_NUM + QID2_NUM) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		goto err;
+	}
+
+	if (stats.port_inflight[p1] != QID1_NUM) {
+		printf("%d: %s port 1 inflight not correct\n", __LINE__,
+				__func__);
+		goto err;
+	}
+	if (stats.port_inflight[p2] != QID2_NUM) {
+		printf("%d: %s port 2 inflight not correct\n", __LINE__,
+				__func__);
+		goto err;
+	}
+
+	/************** DEQUEUE INFLIGHT COUNT CHECKS  ****************/
+	/* port 1 */
+	struct rte_event events[QID1_NUM + QID2_NUM];
+	uint32_t deq_pkts = rte_event_dequeue_burst(evdev, t->port[p1], events,
+			RTE_DIM(events), 0);
+
+	if (deq_pkts != QID1_NUM) {
+		printf("%d: Port 1: DEQUEUE inflight failed\n", __LINE__);
+		goto err;
+	}
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p1] != QID1_NUM) {
+		printf("%d: port 1 inflight decrement after DEQ != 0\n",
+				__LINE__);
+		goto err;
+	}
+	for (i = 0; i < QID1_NUM; i++) {
+		err = rte_event_enqueue_burst(evdev, t->port[p1], &release_ev,
+				1);
+		if (err != 1) {
+			printf("%d: %s rte enqueue of inf release failed\n",
+				__LINE__, __func__);
+			goto err;
+		}
+	}
+
+	/*
+	 * As the scheduler core decrements inflights, it needs to run to
+	 * process packets to act on the drop messages
+	 */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p1] != 0) {
+		printf("%d: port 1 inflight NON NULL after DROP\n", __LINE__);
+		goto err;
+	}
+
+	/* port2 */
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[p2], events,
+			RTE_DIM(events), 0);
+	if (deq_pkts != QID2_NUM) {
+		printf("%d: Port 2: DEQUEUE inflight failed\n", __LINE__);
+		goto err;
+	}
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p2] != QID2_NUM) {
+		printf("%d: port 1 inflight decrement after DEQ != 0\n",
+				__LINE__);
+		goto err;
+	}
+	for (i = 0; i < QID2_NUM; i++) {
+		err = rte_event_enqueue_burst(evdev, t->port[p2], &release_ev,
+				1);
+		if (err != 1) {
+			printf("%d: %s rte enqueue of inf release failed\n",
+				__LINE__, __func__);
+			goto err;
+		}
+	}
+
+	/*
+	 * As the scheduler core decrements inflights, it needs to run to
+	 * process packets to act on the drop messages
+	 */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p2] != 0) {
+		printf("%d: port 2 inflight NON NULL after DROP\n", __LINE__);
+		goto err;
+	}
+	cleanup(t);
+	return 0;
+
+err:
+	rte_event_dev_dump(evdev, stdout);
+	cleanup(t);
+	return -1;
+}
+
+static int
+parallel_basic(struct test *t, int check_order)
+{
+	const uint8_t rx_port = 0;
+	const uint8_t w1_port = 1;
+	const uint8_t w3_port = 3;
+	const uint8_t tx_port = 4;
+	int err;
+	int i;
+	uint32_t deq_pkts, j;
+	struct rte_mbuf *mbufs[3];
+	struct rte_mbuf *mbufs_out[3];
+	const uint32_t MAGIC_SEQN = 1234;
+
+	/* Create instance with 4 ports */
+	if (init(t, 2, tx_port + 1) < 0 ||
+			create_ports(t, tx_port + 1) < 0 ||
+			(check_order ?  create_ordered_qids(t, 1) :
+				create_unordered_qids(t, 1)) < 0 ||
+			create_directed_qids(t, 1, &tx_port)) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * CQ mapping to QID
+	 * We need three ports, all mapped to the same ordered qid0. Then we'll
+	 * take a packet out to each port, re-enqueue in reverse order,
+	 * then make sure the reordering has taken place properly when we
+	 * dequeue from the tx_port.
+	 *
+	 * Simplified test setup diagram:
+	 *
+	 * rx_port        w1_port
+	 *        \     /         \
+	 *         qid0 - w2_port - qid1
+	 *              \         /     \
+	 *                w3_port        tx_port
+	 */
+	/* CQ mapping to QID for LB ports (directed mapped on create) */
+	for (i = w1_port; i <= w3_port; i++) {
+		err = rte_event_port_link(evdev, t->port[i], &t->qid[0], NULL,
+				1);
+		if (err != 1) {
+			printf("%d: error mapping lb qid\n", __LINE__);
+			cleanup(t);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* Enqueue 3 packets to the rx port */
+	for (i = 0; i < 3; i++) {
+		struct rte_event ev;
+		mbufs[i] = rte_gen_arp(0, t->mbuf_pool);
+		if (!mbufs[i]) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		ev.queue_id = t->qid[0];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = mbufs[i];
+		mbufs[i]->seqn = MAGIC_SEQN + i;
+
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_port], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue pkt %u, retval = %u\n",
+					__LINE__, i, err);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	/* use extra slot to make logic in loops easier */
+	struct rte_event deq_ev[w3_port + 1];
+
+	/* Dequeue the 3 packets, one from each worker port */
+	for (i = w1_port; i <= w3_port; i++) {
+		deq_pkts = rte_event_dequeue_burst(evdev, t->port[i],
+				&deq_ev[i], 1, 0);
+		if (deq_pkts != 1) {
+			printf("%d: Failed to deq\n", __LINE__);
+			rte_event_dev_dump(evdev, stdout);
+			return -1;
+		}
+	}
+
+	/* Enqueue each packet in reverse order, flushing after each one */
+	for (i = w3_port; i >= w1_port; i--) {
+
+		deq_ev[i].op = RTE_EVENT_OP_FORWARD;
+		deq_ev[i].queue_id = t->qid[1];
+		err = rte_event_enqueue_burst(evdev, t->port[i], &deq_ev[i], 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+	rte_event_schedule(evdev);
+
+	/* dequeue from the tx ports, we should get 3 packets */
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[tx_port], deq_ev,
+			3, 0);
+
+	/* Check to see if we've got all 3 packets */
+	if (deq_pkts != 3) {
+		printf("%d: expected 3 packets at tx port got %d from port %d\n",
+			__LINE__, deq_pkts, tx_port);
+		rte_event_dev_dump(evdev, stdout);
+		return 1;
+	}
+
+	/* Check to see if the sequence numbers are in expected order */
+	if (check_order) {
+		for (j = 0 ; j < deq_pkts ; j++) {
+			if (deq_ev[j].mbuf->seqn != MAGIC_SEQN + j) {
+				printf(
+					"%d: Incorrect sequence number(%d) from port %d\n",
+					__LINE__, mbufs_out[j]->seqn, tx_port);
+				return -1;
+			}
+		}
+	}
+
+	/* Destroy the instance */
+	cleanup(t);
+	return 0;
+}
+
+static int
+ordered_basic(struct test *t)
+{
+	return parallel_basic(t, 1);
+}
+
+static int
+unordered_basic(struct test *t)
+{
+	return parallel_basic(t, 0);
+}
+
+static int
+holb(struct test *t) /* test to check we avoid basic head-of-line blocking */
+{
+	const struct rte_event new_ev = {
+			.op = RTE_EVENT_OP_NEW
+			/* all other fields zero */
+	};
+	struct rte_event ev = new_ev;
+	unsigned int rx_port = 0; /* port we get the first flow on */
+	char rx_port_used_stat[64];
+	char rx_port_free_stat[64];
+	char other_port_used_stat[64];
+
+	if (init(t, 1, 2) < 0 ||
+			create_ports(t, 2) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+	int nb_links = rte_event_port_link(evdev, t->port[1], NULL, NULL, 0);
+	if (rte_event_port_link(evdev, t->port[0], NULL, NULL, 0) != 1 ||
+			nb_links != 1) {
+		printf("%d: Error links queue to ports\n", __LINE__);
+		goto err;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		goto err;
+	}
+
+	/* send one packet and see where it goes, port 0 or 1 */
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error doing first enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	if (rte_event_dev_xstats_by_name_get(evdev, "port_0_cq_ring_used", NULL) != 1)
+		rx_port = 1;
+	snprintf(rx_port_used_stat, sizeof(rx_port_used_stat),
+			"port_%u_cq_ring_used", rx_port);
+	snprintf(rx_port_free_stat, sizeof(rx_port_free_stat),
+			"port_%u_cq_ring_free", rx_port);
+	snprintf(other_port_used_stat, sizeof(other_port_used_stat),
+			"port_%u_cq_ring_used", rx_port ^ 1);
+	if (rte_event_dev_xstats_by_name_get(evdev, rx_port_used_stat, NULL) != 1) {
+		printf("%d: Error, first event not scheduled\n", __LINE__);
+		goto err;
+	}
+
+	/* now fill up the rx port's queue with one flow to cause HOLB */
+	do {
+		ev = new_ev;
+		if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+			printf("%d: Error with enqueue\n", __LINE__);
+			goto err;
+		}
+		rte_event_schedule(evdev);
+	} while (rte_event_dev_xstats_by_name_get(evdev, rx_port_free_stat, NULL) != 0);
+
+	/* one more packet, which needs to stay in IQ - i.e. HOLB */
+	ev = new_ev;
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error with enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	/* check that the other port still has an empty CQ */
+	if (rte_event_dev_xstats_by_name_get(evdev, other_port_used_stat, NULL) != 0) {
+		printf("%d: Error, second port CQ is not empty\n", __LINE__);
+		goto err;
+	}
+	/* check IQ now has one packet */
+	if (rte_event_dev_xstats_by_name_get(evdev, "qid_0_iq_0_used", NULL) != 1) {
+		printf("%d: Error, QID does not have exactly 1 packet\n", __LINE__);
+		goto err;
+	}
+
+	/* send another flow, which should pass the other IQ entry */
+	ev = new_ev;
+	ev.flow_id = 1;
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error with enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	if (rte_event_dev_xstats_by_name_get(evdev, other_port_used_stat, NULL) != 1) {
+		printf("%d: Error, second flow did not pass out first\n", __LINE__);
+		goto err;
+	}
+
+	if (rte_event_dev_xstats_by_name_get(evdev, "qid_0_iq_0_used", NULL) != 1) {
+		printf("%d: Error, QID does not have exactly 1 packet\n", __LINE__);
+		goto err;
+	}
+	cleanup(t);
+	return 0;
+err:
+	rte_event_dev_dump(evdev, stdout);
+	cleanup(t);
+	return -1;
+}
+
+static int
+worker_loopback_worker_fn(void *arg)
+{
+	struct test *t = arg;
+	uint8_t port = t->port[1];
+	int count = 0;
+	int enqd;
+
+	/*
+	 * Takes packets from the input port and then loops them back through
+	 * the Queue Manager. Each packet gets looped through QIDs 0-8, 16
+	 * times so each packet goes through 8*16 = 128 times.
+	 */
+	printf("%d: \tWorker function started\n", __LINE__);
+	while (count < NUM_PACKETS) {
+#define BURST_SIZE 32
+		struct rte_event ev[BURST_SIZE];
+		uint16_t i, nb_rx = rte_event_dequeue_burst(evdev, port, ev,
+				BURST_SIZE, 0);
+		if (nb_rx == 0) {
+			rte_pause();
+			continue;
+		}
+
+		for (i = 0; i < nb_rx; i++) {
+			ev[i].queue_id++;
+			if (ev[i].queue_id != 8) {
+				ev[i].op = RTE_EVENT_OP_FORWARD;
+				enqd = rte_event_enqueue_burst(evdev, port,
+						&ev[i], 1);
+				if (enqd != 1) {
+					printf("%d: Can't enqueue FWD!!\n",
+							__LINE__);
+					return -1;
+				}
+				continue;
+			}
+
+			ev[i].queue_id = 0;
+			ev[i].mbuf->udata64++;
+			if (ev[i].mbuf->udata64 != 16) {
+				ev[i].op = RTE_EVENT_OP_FORWARD;
+				enqd = rte_event_enqueue_burst(evdev, port,
+						&ev[i], 1);
+				if (enqd != 1) {
+					printf("%d: Can't enqueue FWD!!\n",
+							__LINE__);
+					return -1;
+				}
+				continue;
+			}
+			/* we have hit 16 iterations through system - drop */
+			rte_pktmbuf_free(ev[i].mbuf);
+			count++;
+			ev[i].op = RTE_EVENT_OP_RELEASE;
+			enqd = rte_event_enqueue_burst(evdev, port, &ev[i], 1);
+			if (enqd != 1) {
+				printf("%d drop enqueue failed\n", __LINE__);
+				return -1;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int
+worker_loopback_producer_fn(void *arg)
+{
+	struct test *t = arg;
+	uint8_t port = t->port[0];
+	uint64_t count = 0;
+
+	printf("%d: \tProducer function started\n", __LINE__);
+	while (count < NUM_PACKETS) {
+		struct rte_mbuf *m = 0;
+		do {
+			m = rte_pktmbuf_alloc(t->mbuf_pool);
+		} while (m == NULL);
+
+		m->udata64 = 0;
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.flow_id = (uintptr_t)m & 0xFFFF,
+				.mbuf = m,
+		};
+
+		if (rte_event_enqueue_burst(evdev, port, &ev, 1) != 1) {
+			while (rte_event_enqueue_burst(evdev, port, &ev, 1) !=
+					1)
+				rte_pause();
+		}
+
+		count++;
+	}
+
+	return 0;
+}
+
+static int
+worker_loopback(struct test *t)
+{
+	/* use a single producer core, and a worker core to see what happens
+	 * if the worker loops packets back multiple times
+	 */
+	struct test_event_dev_stats stats;
+	uint64_t print_cycles = 0, cycles = 0;
+	uint64_t tx_pkts = 0;
+	int err;
+	int w_lcore, p_lcore;
+
+	if (init(t, 8, 2) < 0 ||
+			create_atomic_qids(t, 8) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* RX with low max events */
+	static struct rte_event_port_conf conf = {
+			.new_event_threshold = 512,
+			.dequeue_depth = 32,
+			.enqueue_depth = 64,
+	};
+	if (rte_event_port_setup(evdev, 0, &conf) < 0) {
+		printf("Error setting up RX port\n");
+		return -1;
+	}
+	t->port[0] = 0;
+	/* TX with higher max events */
+	conf.new_event_threshold = 4096;
+	if (rte_event_port_setup(evdev, 1, &conf) < 0) {
+		printf("Error setting up TX port\n");
+		return -1;
+	}
+	t->port[1] = 1;
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[1], NULL, NULL, 0);
+	if (err != 8) { /* should have mapped all queues*/
+		printf("%d: error mapping port 2 to all qids\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	p_lcore = rte_get_next_lcore(
+			/* start core */ -1,
+			/* skip master */ 1,
+			/* wrap */ 0);
+	w_lcore = rte_get_next_lcore(p_lcore, 1, 0);
+
+	rte_eal_remote_launch(worker_loopback_producer_fn, t, p_lcore);
+	rte_eal_remote_launch(worker_loopback_worker_fn, t, w_lcore);
+
+	print_cycles = cycles = rte_get_timer_cycles();
+	while (rte_eal_get_lcore_state(p_lcore) != FINISHED ||
+			rte_eal_get_lcore_state(w_lcore) != FINISHED) {
+
+		rte_event_schedule(evdev);
+
+		uint64_t new_cycles = rte_get_timer_cycles();
+
+		if (new_cycles - print_cycles > rte_get_timer_hz()) {
+			test_event_dev_stats_get(evdev, &stats);
+			printf(
+				"%d: \tSched Rx = %" PRIu64 ", Tx = %" PRIu64 "\n",
+				__LINE__, stats.rx_pkts, stats.tx_pkts);
+
+			print_cycles = new_cycles;
+		}
+		if (new_cycles - cycles > rte_get_timer_hz() * 3) {
+			test_event_dev_stats_get(evdev, &stats);
+			if (stats.tx_pkts == tx_pkts) {
+				rte_event_dev_dump(evdev, stdout);
+				printf(
+					"%d: No schedules for seconds, deadlock\n",
+					__LINE__);
+				return -1;
+			}
+			tx_pkts = stats.tx_pkts;
+			cycles = new_cycles;
+		}
+	}
+	rte_event_schedule(evdev); /* ensure all completions are flushed */
+
+	rte_eal_mp_wait_lcore();
+
+	cleanup(t);
+	return 0;
+}
+
+static struct rte_mempool *eventdev_func_mempool;
+
+static int
+test_sw_eventdev(void)
+{
+	struct test *t = malloc(sizeof(struct test));
+	int ret;
+
+	const char *eventdev_name = "event_sw0";
+	evdev = rte_event_dev_get_dev_id(eventdev_name);
+	if (evdev < 0) {
+		printf("%d: Eventdev %s not found - creating.\n",
+				__LINE__, eventdev_name);
+		if (rte_eal_vdev_init(eventdev_name, NULL) < 0) {
+			printf("Error creating eventdev\n");
+			return -1;
+		}
+		evdev = rte_event_dev_get_dev_id(eventdev_name);
+		if (evdev < 0) {
+			printf("Error finding newly created eventdev\n");
+			return -1;
+		}
+	}
+
+	/* Only create mbuf pool once, reuse for each test run */
+	if (!eventdev_func_mempool) {
+		eventdev_func_mempool = rte_pktmbuf_pool_create(
+				"EVENTDEV_SW_SA_MBUF_POOL",
+				(1<<12), /* 4k buffers */
+				32 /*MBUF_CACHE_SIZE*/,
+				0,
+				512, /* use very small mbufs */
+				rte_socket_id());
+		if (!eventdev_func_mempool) {
+			printf("ERROR creating mempool\n");
+			return -1;
+		}
+	}
+	t->mbuf_pool = eventdev_func_mempool;
+
+	printf("*** Running Single Directed Packet test...\n");
+	ret = test_single_directed_packet(t);
+	if (ret != 0) {
+		printf("ERROR - Single Directed Packet test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Single Load Balanced Packet test...\n");
+	ret = single_packet(t);
+	if (ret != 0) {
+		printf("ERROR - Single Packet test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Unordered Basic test...\n");
+	ret = unordered_basic(t);
+	if (ret != 0) {
+		printf("ERROR -  Unordered Basic test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Ordered Basic test...\n");
+	ret = ordered_basic(t);
+	if (ret != 0) {
+		printf("ERROR -  Ordered Basic test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Burst Packets test...\n");
+	ret = burst_packets(t);
+	if (ret != 0) {
+		printf("ERROR - Burst Packets test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Load Balancing test...\n");
+	ret = load_balancing(t);
+	if (ret != 0) {
+		printf("ERROR - Load Balancing test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Directed test...\n");
+	ret = test_priority_directed(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Directed test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Atomic test...\n");
+	ret = test_priority_atomic(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Atomic test FAILED.\n");
+		return ret;
+	}
+
+	printf("*** Running Prioritized Ordered test...\n");
+	ret = test_priority_ordered(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Ordered test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Unordered test...\n");
+	ret = test_priority_unordered(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Unordered test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Invalid QID test...\n");
+	ret = invalid_qid(t);
+	if (ret != 0) {
+		printf("ERROR - Invalid QID test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Load Balancing History test...\n");
+	ret = load_balancing_history(t);
+	if (ret != 0) {
+		printf("ERROR - Load Balancing History test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Inflight Count test...\n");
+	ret = inflight_counts(t);
+	if (ret != 0) {
+		printf("ERROR - Inflight Count test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Abuse Inflights test...\n");
+	ret = abuse_inflights(t);
+	if (ret != 0) {
+		printf("ERROR - Abuse Inflights test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running QID Priority test...\n");
+	ret = qid_priorities(t);
+	if (ret != 0) {
+		printf("ERROR - QID Priority test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Head-of-line-blocking test...\n");
+	ret = holb(t);
+	if (ret != 0) {
+		printf("ERROR - Head-of-line-blocking test FAILED.\n");
+		return ret;
+	}
+	if (rte_lcore_count() >= 3) {
+		printf("*** Running Worker loopback test...\n");
+		ret = worker_loopback(t);
+		if (ret != 0) {
+			printf("ERROR - Worker loopback test FAILED.\n");
+			return ret;
+		}
+	} else {
+		printf("### Not enough cores for worker loopback test.\n");
+		printf("### Need at least 3 cores for test.\n");
+	}
+	/*
+	 * Free test instance, leaving mempool initialized, and a pointer to it
+	 * in static eventdev_func_mempool, as it is re-used on re-runs
+	 */
+	free(t);
+
+	return 0;
+}
+
+REGISTER_TEST_COMMAND(eventdev_sw_autotest, test_sw_eventdev);
-- 
2.7.4

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:33PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Since the sw driver is a standalone lookaside device that has no HW
> requirements, we can provide a set of unit tests that test its
> functionality across the different queue types and with different input
> scenarios.
> 

Thanks for SW driver specific test cases. It provided me a good insight
of expected application behavior from SW driver perspective and in turn it created
some challenge in portable applications.

I would like highlight a main difference between the implementation and get a
consensus on how to abstract it?

Based on existing header file, We can do event pipelining in two different ways
a) Flow-based event pipelining
b) queue_id based event pipelining

I will provide an example to showcase application flow in both modes.
Based on my understanding from SW driver source code, it supports only
queue_id based event pipelining. I guess, Flow based event pipelining will
work semantically with SW driver but it will be very slow.

I think, the reason for the difference is the capability of the context definition.
SW model the context is - queue_id
Cavium HW model the context is queue_id + flow_id + sub_event_type +
event_type

AFAIK, queue_id based event pipelining will work with NXP HW but I am not
sure about flow based event pipelining model with NXP HW. Appreciate any
input this?

In Cavium HW, We support both modes.

As an open question, Should we add a capability flag to advertise the supported
models and let application choose the model based on implementation capability. The
downside is, a small portion of stage advance code will be different but we
can reuse the STAGE specific application code(I think it a fair
trade off)

Bruce, Harry, Gage, Hemant, Nipun
Thoughts? Or any other proposal?

I will take an non trivial realworld NW use case show the difference.
A standard IPSec outbound processing will have minimum 4 to 5 stages

stage_0:
--------
a) Takes the pkts from ethdev and push to eventdev as
RTE_EVENT_OP_NEW
b) Some HW implementation, This will be done by HW. In SW implementation
it done by service cores

stage_1:(ORDERED)
------------------
a) Receive pkts from stage_0 in ORDERED flow and it process in parallel on N
of cores
b) Find a SA belongs that packet move to next stage for SA specific
outbound operations.Outbound processing starts with updating the
sequence number in the critical section and followed by packet encryption in
parallel.

stage_2(ATOMIC) based on SA
----------------------------
a) Update the sequence number and move to ORDERED sched_type for packet
encryption in parallel

stage_3(ORDERED) based on SA
----------------------------
a) Encrypt the packets in parallel
b) Do output route look-up and figure out tx port and queue to transmit
the packet
c) Move to ATOMIC stage based on tx port and tx queue_id to transmit
the packet _without_ losing the ingress ordering

stage_4(ATOMIC) based on tx port/tx queue
-----------------------------------------
a) enqueue the encrypted packet to ethdev tx port/tx_queue


1) queue_id based event pipelining
=================================

stage_1_work(assigned to event queue 1)# N ports/N cores establish
link to queue 1 through rte_event_port_link()

on_each_cores_linked_to_queue1(stage1)
while(1)
{
                /* STAGE 1 processing */
                nr_events = rte_event_dequeue_burst(ev,..);
                if (!nr_events);
                                continue;

                sa = find_sa_from_packet(ev.mbuf);

                /* move to next stage(ATOMIC) */
                ev.event_type = RTE_EVENT_TYPE_CPU;
                ev.sub_event_type = 2;
                ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
                ev.flow_id =  sa;
                ev.op = RTE_EVENT_OP_FORWARD;
                ev.queue_id = 2;
                /* move to stage 2(event queue 2) */
                rte_event_enqueue_burst(ev,..);
}

on_each_cores_linked_to_queue2(stage2)
while(1)
{
                /* STAGE 2 processing */
                nr_events = rte_event_dequeue_burst(ev,..);
                if (!nr_events);
			continue;

                sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq number update in critical section */

                /* move to next stage(ORDERED) */
                ev.event_type = RTE_EVENT_TYPE_CPU;
                ev.sub_event_type = 3;
                ev.sched_type = RTE_SCHED_TYPE_ORDERED;
                ev.flow_id =  sa;
                ev.op = RTE_EVENT_OP_FORWARD;
                ev.queue_id = 3;
                /* move to stage 3(event queue 3) */
                rte_event_enqueue_burst(ev,..);
}

on_each_cores_linked_to_queue3(stage3)
while(1)
{
                /* STAGE 3 processing */
                nr_events = rte_event_dequeue_burst(ev,..);
                if (!nr_events);
			continue;

                sa_specific_ordered_processing(sa /*ev.flow_id */);/* packets encryption in parallel */

                /* move to next stage(ATOMIC) */
                ev.event_type = RTE_EVENT_TYPE_CPU;
                ev.sub_event_type = 4;
                ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
		output_tx_port_queue = find_output_tx_queue_and_tx_port(ev.mbuff);
                ev.flow_id =  output_tx_port_queue;
                ev.op = RTE_EVENT_OP_FORWARD;
                ev.queue_id = 4;
                /* move to stage 4(event queue 4) */
                rte_event_enqueue_burst(ev,...);
}

on_each_cores_linked_to_queue4(stage4)
while(1)
{
                /* STAGE 4 processing */
                nr_events = rte_event_dequeue_burst(ev,..);
                if (!nr_events);
			continue;

		rte_eth_tx_buffer();
}

2) flow-based event pipelining
=============================

- No need to partition queues for different stages
- All the cores can operate on all the stages, Thus enables
automatic multicore scaling, true dynamic load balancing,
- Fairly large number of SA(kind of 2^16 to 2^20) can be processed in parallel
Something existing IPSec application has constraints on
http://dpdk.org/doc/guides-16.04/sample_app_ug/ipsec_secgw.html

on_each_worker_cores()
while(1)
{
	rte_event_dequeue_burst(ev,..)
	if (!nr_events);
		continue;

	/* STAGE 1 processing */
	if(ev.event_type == RTE_EVENT_TYPE_ETHDEV) {
		sa = find_it_from_packet(ev.mbuf);
		/* move to next stage2(ATOMIC) */
		ev.event_type = RTE_EVENT_TYPE_CPU;
		ev.sub_event_type = 2;
		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
		ev.flow_id =  sa;
		ev.op = RTE_EVENT_OP_FORWARD;
		rte_event_enqueue_burst(ev..);

	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 2) { /* stage 2 */

		sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq number update in critical section */
		/* move to next stage(ORDERED) */
		ev.event_type = RTE_EVENT_TYPE_CPU;
		ev.sub_event_type = 3;
		ev.sched_type = RTE_SCHED_TYPE_ORDERED;
		ev.flow_id =  sa;
		ev.op = RTE_EVENT_OP_FORWARD;
		rte_event_enqueue_burst(ev,..);

	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 3) { /* stage 3 */

		sa_specific_ordered_processing(sa /* ev.flow_id */);/* like encrypting packets in parallel */
		/* move to next stage(ATOMIC) */
		ev.event_type = RTE_EVENT_TYPE_CPU;
		ev.sub_event_type = 4;
		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
		output_tx_port_queue = find_output_tx_queue_and_tx_port(ev.mbuff);
		ev.flow_id =  output_tx_port_queue;
		ev.op = RTE_EVENT_OP_FORWARD;
		rte_event_enqueue_burst(ev,..);

	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 4) { /* stage 4 */
		rte_eth_tx_buffer();
	}
}

/Jerin
Cavium

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Wednesday, February 8, 2017 10:23 AM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>; Hunt, David
> <david.hunt@intel.com>; nipun.gupta@nxp.com; hemant.agrawal@nxp.com; Eads, Gage
> <gage.eads@intel.com>
> Subject: Re: [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

<snip>
 
> Thanks for SW driver specific test cases. It provided me a good insight
> of expected application behavior from SW driver perspective and in turn it created
> some challenge in portable applications.
> 
> I would like highlight a main difference between the implementation and get a
> consensus on how to abstract it?

Thanks for taking the time to detail your thoughts - the examples certainly help to get a better picture of the whole.


> Based on existing header file, We can do event pipelining in two different ways
> a) Flow-based event pipelining
> b) queue_id based event pipelining
> 
> I will provide an example to showcase application flow in both modes.
> Based on my understanding from SW driver source code, it supports only
> queue_id based event pipelining. I guess, Flow based event pipelining will
> work semantically with SW driver but it will be very slow.
> 
> I think, the reason for the difference is the capability of the context definition.
> SW model the context is - queue_id
> Cavium HW model the context is queue_id + flow_id + sub_event_type +
> event_type
> 
> AFAIK, queue_id based event pipelining will work with NXP HW but I am not
> sure about flow based event pipelining model with NXP HW. Appreciate any
> input this?
> 
> In Cavium HW, We support both modes.
> 
> As an open question, Should we add a capability flag to advertise the supported
> models and let application choose the model based on implementation capability. The
> downside is, a small portion of stage advance code will be different but we
> can reuse the STAGE specific application code(I think it a fair
> trade off)
> 
> Bruce, Harry, Gage, Hemant, Nipun
> Thoughts? Or any other proposal?


[HvH] Comments inline.

 
> I will take an non trivial realworld NW use case show the difference.
> A standard IPSec outbound processing will have minimum 4 to 5 stages
> 
> stage_0:
> --------
> a) Takes the pkts from ethdev and push to eventdev as
> RTE_EVENT_OP_NEW
> b) Some HW implementation, This will be done by HW. In SW implementation
> it done by service cores
> 
> stage_1:(ORDERED)
> ------------------
> a) Receive pkts from stage_0 in ORDERED flow and it process in parallel on N
> of cores
> b) Find a SA belongs that packet move to next stage for SA specific
> outbound operations.Outbound processing starts with updating the
> sequence number in the critical section and followed by packet encryption in
> parallel.
> 
> stage_2(ATOMIC) based on SA
> ----------------------------
> a) Update the sequence number and move to ORDERED sched_type for packet
> encryption in parallel
> 
> stage_3(ORDERED) based on SA
> ----------------------------
> a) Encrypt the packets in parallel
> b) Do output route look-up and figure out tx port and queue to transmit
> the packet
> c) Move to ATOMIC stage based on tx port and tx queue_id to transmit
> the packet _without_ losing the ingress ordering
> 
> stage_4(ATOMIC) based on tx port/tx queue
> -----------------------------------------
> a) enqueue the encrypted packet to ethdev tx port/tx_queue
>
>
> 1) queue_id based event pipelining
> =================================
> 
> stage_1_work(assigned to event queue 1)# N ports/N cores establish
> link to queue 1 through rte_event_port_link()
> 
> on_each_cores_linked_to_queue1(stage1)


[HvH] All worker cores can be linked to all stages - we do a lookup of what stage the work is based on the event->queue_id.


> while(1)
> {
>                 /* STAGE 1 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
>                                 continue;
> 
>                 sa = find_sa_from_packet(ev.mbuf);
> 
>                 /* move to next stage(ATOMIC) */
>                 ev.event_type = RTE_EVENT_TYPE_CPU;
>                 ev.sub_event_type = 2;
>                 ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
>                 ev.flow_id =  sa;
>                 ev.op = RTE_EVENT_OP_FORWARD;
>                 ev.queue_id = 2;
>                 /* move to stage 2(event queue 2) */
>                 rte_event_enqueue_burst(ev,..);
> }
> 
> on_each_cores_linked_to_queue2(stage2)
> while(1)
> {
>                 /* STAGE 2 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
> 			continue;
> 
>                 sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq number update in
> critical section */
> 
>                 /* move to next stage(ORDERED) */
>                 ev.event_type = RTE_EVENT_TYPE_CPU;
>                 ev.sub_event_type = 3;
>                 ev.sched_type = RTE_SCHED_TYPE_ORDERED;
>                 ev.flow_id =  sa;
>                 ev.op = RTE_EVENT_OP_FORWARD;
>                 ev.queue_id = 3;
>                 /* move to stage 3(event queue 3) */
>                 rte_event_enqueue_burst(ev,..);
> }
> 
> on_each_cores_linked_to_queue3(stage3)
> while(1)
> {
>                 /* STAGE 3 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
> 			continue;
> 
>                 sa_specific_ordered_processing(sa /*ev.flow_id */);/* packets encryption in
> parallel */
> 
>                 /* move to next stage(ATOMIC) */
>                 ev.event_type = RTE_EVENT_TYPE_CPU;
>                 ev.sub_event_type = 4;
>                 ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> 		output_tx_port_queue = find_output_tx_queue_and_tx_port(ev.mbuff);
>                 ev.flow_id =  output_tx_port_queue;
>                 ev.op = RTE_EVENT_OP_FORWARD;
>                 ev.queue_id = 4;
>                 /* move to stage 4(event queue 4) */
>                 rte_event_enqueue_burst(ev,...);
> }
> 
> on_each_cores_linked_to_queue4(stage4)
> while(1)
> {
>                 /* STAGE 4 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
> 			continue;
> 
> 		rte_eth_tx_buffer();
> }
> 
> 2) flow-based event pipelining
> =============================
> 
> - No need to partition queues for different stages
> - All the cores can operate on all the stages, Thus enables
> automatic multicore scaling, true dynamic load balancing,


[HvH] The sw case is the same - all cores can map to all stages, the lookup for stage of work is the queue_id.


> - Fairly large number of SA(kind of 2^16 to 2^20) can be processed in parallel
> Something existing IPSec application has constraints on
> http://dpdk.org/doc/guides-16.04/sample_app_ug/ipsec_secgw.html
> 
> on_each_worker_cores()
> while(1)
> {
> 	rte_event_dequeue_burst(ev,..)
> 	if (!nr_events);
> 		continue;
> 
> 	/* STAGE 1 processing */
> 	if(ev.event_type == RTE_EVENT_TYPE_ETHDEV) {
> 		sa = find_it_from_packet(ev.mbuf);
> 		/* move to next stage2(ATOMIC) */
> 		ev.event_type = RTE_EVENT_TYPE_CPU;
> 		ev.sub_event_type = 2;
> 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> 		ev.flow_id =  sa;
> 		ev.op = RTE_EVENT_OP_FORWARD;
> 		rte_event_enqueue_burst(ev..);
> 
> 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 2) { /* stage 2 */


[HvH] In the case of software eventdev ev.queue_id is used instead of ev.sub_event_type - but this is the same lookup operation as mentioned above. I don't see a fundamental difference between these approaches?

> 
> 		sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq number update in critical
> section */
> 		/* move to next stage(ORDERED) */
> 		ev.event_type = RTE_EVENT_TYPE_CPU;
> 		ev.sub_event_type = 3;
> 		ev.sched_type = RTE_SCHED_TYPE_ORDERED;
> 		ev.flow_id =  sa;
> 		ev.op = RTE_EVENT_OP_FORWARD;
> 		rte_event_enqueue_burst(ev,..);
> 
> 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 3) { /* stage 3 */
> 
> 		sa_specific_ordered_processing(sa /* ev.flow_id */);/* like encrypting packets in
> parallel */
> 		/* move to next stage(ATOMIC) */
> 		ev.event_type = RTE_EVENT_TYPE_CPU;
> 		ev.sub_event_type = 4;
> 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> 		output_tx_port_queue = find_output_tx_queue_and_tx_port(ev.mbuff);
> 		ev.flow_id =  output_tx_port_queue;
> 		ev.op = RTE_EVENT_OP_FORWARD;
> 		rte_event_enqueue_burst(ev,..);
> 
> 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 4) { /* stage 4 */
> 		rte_eth_tx_buffer();
> 	}
> }
> 
> /Jerin
> Cavium

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Jerin Jacob]

On Wed, Feb 08, 2017 at 10:44:11AM +0000, Van Haaren, Harry wrote:
> > -----Original Message-----
> > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > Sent: Wednesday, February 8, 2017 10:23 AM
> > To: Van Haaren, Harry <harry.van.haaren@intel.com>
> > Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>; Hunt, David
> > <david.hunt@intel.com>; nipun.gupta@nxp.com; hemant.agrawal@nxp.com; Eads, Gage
> > <gage.eads@intel.com>
> > Subject: Re: [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver
> 
> <snip>
>  
> > Thanks for SW driver specific test cases. It provided me a good insight
> > of expected application behavior from SW driver perspective and in turn it created
> > some challenge in portable applications.
> > 
> > I would like highlight a main difference between the implementation and get a
> > consensus on how to abstract it?
> 
> Thanks for taking the time to detail your thoughts - the examples certainly help to get a better picture of the whole.
> 

<snip>

> 
> > - Fairly large number of SA(kind of 2^16 to 2^20) can be processed in parallel
> > Something existing IPSec application has constraints on
> > http://dpdk.org/doc/guides-16.04/sample_app_ug/ipsec_secgw.html
> > 
> > on_each_worker_cores()
> > while(1)
> > {
> > 	rte_event_dequeue_burst(ev,..)
> > 	if (!nr_events);
> > 		continue;
> > 
> > 	/* STAGE 1 processing */
> > 	if(ev.event_type == RTE_EVENT_TYPE_ETHDEV) {
> > 		sa = find_it_from_packet(ev.mbuf);
> > 		/* move to next stage2(ATOMIC) */
> > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > 		ev.sub_event_type = 2;
> > 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > 		ev.flow_id =  sa;
> > 		ev.op = RTE_EVENT_OP_FORWARD;
> > 		rte_event_enqueue_burst(ev..);
> > 
> > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 2) { /* stage 2 */
> 
> 
> [HvH] In the case of software eventdev ev.queue_id is used instead of ev.sub_event_type - but this is the same lookup operation as mentioned above. I don't see a fundamental difference between these approaches?


Does that mean ev.sub_event_type can not be use for event pipelining.
Right?  Looks like NXP HW has similar common behavior. If so, How about
abstracting with union(see below) to have portable application code?

Application will use "next_stage"(or similar name) to advance the stage, based on the
capability or configured mode(flow and/or queue based) underneath
implementation will move to next stage.

I will send a patch with above details. What do you think?

diff --git a/lib/librte_eventdev/rte_eventdev.h
b/lib/librte_eventdev/rte_eventdev.h
index c2f9310..040d70d 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -907,17 +907,13 @@ struct rte_event {
                uint64_t event;
                /** Event attributes for dequeue or enqueue operation */
                struct {
-                       uint32_t flow_id:20;
+                       uint32_t flow_id:28;
                        /**< Targeted flow identifier for the enqueue and
                         * dequeue operation.
                         * The value must be in the range of
                         * [0, nb_event_queue_flows - 1] which
                         * previously supplied to
                         * rte_event_dev_configure().
                         */
-                       uint32_t sub_event_type:8;
-                       /**< Sub-event types based on the event source.
-                        * @see RTE_EVENT_TYPE_CPU
-                        */
                        uint32_t event_type:4;
                        /**< Event type to classify the event source.
                         * @see RTE_EVENT_TYPE_ETHDEV,
                         * (RTE_EVENT_TYPE_*)
@@ -935,13 +931,16 @@ struct rte_event {
                         * associated with flow id on a given event
                         * queue
                         * for the enqueue and dequeue operation.
                         */
-                       uint8_t queue_id;
-                       /**< Targeted event queue identifier for the enqueue or
-                        * dequeue operation.
-                        * The value must be in the range of
-                        * [0, nb_event_queues - 1] which previously supplied to
-                        * rte_event_dev_configure().
-                        */
+                       union {
+                               uint8_t queue_id;
+                               /**< Targeted event queue identifier for the enqueue or
+                                * dequeue operation.
+                                * The value must be in the range of
+                                * [0, nb_event_queues - 1] which previously supplied to
+                                * rte_event_dev_configure().
+                                */
+                               uint8_t next_stage;
+                       }



> 
> > 
> > 		sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq number update in critical
> > section */
> > 		/* move to next stage(ORDERED) */
> > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > 		ev.sub_event_type = 3;
> > 		ev.sched_type = RTE_SCHED_TYPE_ORDERED;
> > 		ev.flow_id =  sa;
> > 		ev.op = RTE_EVENT_OP_FORWARD;
> > 		rte_event_enqueue_burst(ev,..);
> > 
> > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 3) { /* stage 3 */
> > 
> > 		sa_specific_ordered_processing(sa /* ev.flow_id */);/* like encrypting packets in
> > parallel */
> > 		/* move to next stage(ATOMIC) */
> > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > 		ev.sub_event_type = 4;
> > 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > 		output_tx_port_queue = find_output_tx_queue_and_tx_port(ev.mbuff);
> > 		ev.flow_id =  output_tx_port_queue;
> > 		ev.op = RTE_EVENT_OP_FORWARD;
> > 		rte_event_enqueue_burst(ev,..);
> > 
> > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 4) { /* stage 4 */
> > 		rte_eth_tx_buffer();
> > 	}
> > }
> > 
> > /Jerin
> > Cavium
> 

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Bruce Richardson]

On Mon, Feb 13, 2017 at 03:58:27PM +0530, Jerin Jacob wrote:
> On Wed, Feb 08, 2017 at 10:44:11AM +0000, Van Haaren, Harry wrote:
> > > -----Original Message-----
> > > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > > Sent: Wednesday, February 8, 2017 10:23 AM
> > > To: Van Haaren, Harry <harry.van.haaren@intel.com>
> > > Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>; Hunt, David
> > > <david.hunt@intel.com>; nipun.gupta@nxp.com; hemant.agrawal@nxp.com; Eads, Gage
> > > <gage.eads@intel.com>
> > > Subject: Re: [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver
> > 
> > <snip>
> >  
> > > Thanks for SW driver specific test cases. It provided me a good insight
> > > of expected application behavior from SW driver perspective and in turn it created
> > > some challenge in portable applications.
> > > 
> > > I would like highlight a main difference between the implementation and get a
> > > consensus on how to abstract it?
> > 
> > Thanks for taking the time to detail your thoughts - the examples certainly help to get a better picture of the whole.
> > 
> 
> <snip>
> 
> > 
> > > - Fairly large number of SA(kind of 2^16 to 2^20) can be processed in parallel
> > > Something existing IPSec application has constraints on
> > > http://dpdk.org/doc/guides-16.04/sample_app_ug/ipsec_secgw.html
> > > 
> > > on_each_worker_cores()
> > > while(1)
> > > {
> > > 	rte_event_dequeue_burst(ev,..)
> > > 	if (!nr_events);
> > > 		continue;
> > > 
> > > 	/* STAGE 1 processing */
> > > 	if(ev.event_type == RTE_EVENT_TYPE_ETHDEV) {
> > > 		sa = find_it_from_packet(ev.mbuf);
> > > 		/* move to next stage2(ATOMIC) */
> > > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > > 		ev.sub_event_type = 2;
> > > 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > > 		ev.flow_id =  sa;
> > > 		ev.op = RTE_EVENT_OP_FORWARD;
> > > 		rte_event_enqueue_burst(ev..);
> > > 
> > > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 2) { /* stage 2 */
> > 
> > 
> > [HvH] In the case of software eventdev ev.queue_id is used instead of ev.sub_event_type - but this is the same lookup operation as mentioned above. I don't see a fundamental difference between these approaches?
> 
> 
> Does that mean ev.sub_event_type can not be use for event pipelining.
> Right?  Looks like NXP HW has similar common behavior. If so, How about
> abstracting with union(see below) to have portable application code?

No, it can if so desired. It may be useful in cases where the queue ids
do not directly correspond to the logical stage number, or perhaps when
a packet need to go back to a previous pipeline stage and wants to
record past history (e.g. after tunnel decap).

> 
> Application will use "next_stage"(or similar name) to advance the stage, based on the
> capability or configured mode(flow and/or queue based) underneath
> implementation will move to next stage.
> 
> I will send a patch with above details. What do you think?
> 
> diff --git a/lib/librte_eventdev/rte_eventdev.h
> b/lib/librte_eventdev/rte_eventdev.h
> index c2f9310..040d70d 100644
> --- a/lib/librte_eventdev/rte_eventdev.h
> +++ b/lib/librte_eventdev/rte_eventdev.h
> @@ -907,17 +907,13 @@ struct rte_event {
>                 uint64_t event;
>                 /** Event attributes for dequeue or enqueue operation */
>                 struct {
> -                       uint32_t flow_id:20;
> +                       uint32_t flow_id:28;
>                         /**< Targeted flow identifier for the enqueue and
>                          * dequeue operation.
>                          * The value must be in the range of
>                          * [0, nb_event_queue_flows - 1] which
>                          * previously supplied to
>                          * rte_event_dev_configure().
>                          */
> -                       uint32_t sub_event_type:8;
> -                       /**< Sub-event types based on the event source.
> -                        * @see RTE_EVENT_TYPE_CPU
> -                        */
>                         uint32_t event_type:4;
>                         /**< Event type to classify the event source.
>                          * @see RTE_EVENT_TYPE_ETHDEV,
>                          * (RTE_EVENT_TYPE_*)
> @@ -935,13 +931,16 @@ struct rte_event {
>                          * associated with flow id on a given event
>                          * queue
>                          * for the enqueue and dequeue operation.
>                          */
> -                       uint8_t queue_id;
> -                       /**< Targeted event queue identifier for the enqueue or
> -                        * dequeue operation.
> -                        * The value must be in the range of
> -                        * [0, nb_event_queues - 1] which previously supplied to
> -                        * rte_event_dev_configure().
> -                        */
> +                       union {
> +                               uint8_t queue_id;
> +                               /**< Targeted event queue identifier for the enqueue or
> +                                * dequeue operation.
> +                                * The value must be in the range of
> +                                * [0, nb_event_queues - 1] which previously supplied to
> +                                * rte_event_dev_configure().
> +                                */
> +                               uint8_t next_stage;
> +                       }
> 
> 
I'm not sure about this. Wouldn't this break your use-case, since the
queue_id and the next_stage have to be the same? I thought you always
enqueued to the same queue, just with a different next_stage value.

/Bruce

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Jerin Jacob]

On Mon, Feb 13, 2017 at 10:45:27AM +0000, Bruce Richardson wrote:
> On Mon, Feb 13, 2017 at 03:58:27PM +0530, Jerin Jacob wrote:
> > On Wed, Feb 08, 2017 at 10:44:11AM +0000, Van Haaren, Harry wrote:
> > > > -----Original Message-----
> > > > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > > > Sent: Wednesday, February 8, 2017 10:23 AM
> > > > To: Van Haaren, Harry <harry.van.haaren@intel.com>
> > > > Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>; Hunt, David
> > > > <david.hunt@intel.com>; nipun.gupta@nxp.com; hemant.agrawal@nxp.com; Eads, Gage
> > > > <gage.eads@intel.com>
> > > > Subject: Re: [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver
> > > 
> > > <snip>
> > >  
> > > > Thanks for SW driver specific test cases. It provided me a good insight
> > > > of expected application behavior from SW driver perspective and in turn it created
> > > > some challenge in portable applications.
> > > > 
> > > > I would like highlight a main difference between the implementation and get a
> > > > consensus on how to abstract it?
> > > 
> > > Thanks for taking the time to detail your thoughts - the examples certainly help to get a better picture of the whole.
> > > 
> > 
> > <snip>
> > 
> > > 
> > > > - Fairly large number of SA(kind of 2^16 to 2^20) can be processed in parallel
> > > > Something existing IPSec application has constraints on
> > > > http://dpdk.org/doc/guides-16.04/sample_app_ug/ipsec_secgw.html
> > > > 
> > > > on_each_worker_cores()
> > > > while(1)
> > > > {
> > > > 	rte_event_dequeue_burst(ev,..)
> > > > 	if (!nr_events);
> > > > 		continue;
> > > > 
> > > > 	/* STAGE 1 processing */
> > > > 	if(ev.event_type == RTE_EVENT_TYPE_ETHDEV) {
> > > > 		sa = find_it_from_packet(ev.mbuf);
> > > > 		/* move to next stage2(ATOMIC) */
> > > > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > > > 		ev.sub_event_type = 2;
> > > > 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > > > 		ev.flow_id =  sa;
> > > > 		ev.op = RTE_EVENT_OP_FORWARD;
> > > > 		rte_event_enqueue_burst(ev..);
> > > > 
> > > > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU && ev.sub_event_type == 2) { /* stage 2 */
> > > 
> > > 
> > > [HvH] In the case of software eventdev ev.queue_id is used instead of ev.sub_event_type - but this is the same lookup operation as mentioned above. I don't see a fundamental difference between these approaches?
> > 
> > 
> > Does that mean ev.sub_event_type can not be use for event pipelining.
> > Right?  Looks like NXP HW has similar common behavior. If so, How about
> > abstracting with union(see below) to have portable application code?
> 
> No, it can if so desired. It may be useful in cases where the queue ids
> do not directly correspond to the logical stage number, or perhaps when
> a packet need to go back to a previous pipeline stage and wants to
> record past history (e.g. after tunnel decap).

OK. Then we are good. No change is required.

One question though, In what basics application choose to the specific
mode?(I guess, "Going back to previous" use case also can be done though
queue id based scheme).
In our case, The sub_event_type based one gives more of "runtime to completion"
support a packet does not go through different queues.

> 
> > 
> > Application will use "next_stage"(or similar name) to advance the stage, based on the
> > capability or configured mode(flow and/or queue based) underneath
> > implementation will move to next stage.
> > 
> > I will send a patch with above details. What do you think?
> > 
> > diff --git a/lib/librte_eventdev/rte_eventdev.h
> > b/lib/librte_eventdev/rte_eventdev.h
> > index c2f9310..040d70d 100644
> > --- a/lib/librte_eventdev/rte_eventdev.h
> > +++ b/lib/librte_eventdev/rte_eventdev.h
> > @@ -907,17 +907,13 @@ struct rte_event {
> >                 uint64_t event;
> >                 /** Event attributes for dequeue or enqueue operation */
> >                 struct {
> > -                       uint32_t flow_id:20;
> > +                       uint32_t flow_id:28;
> >                         /**< Targeted flow identifier for the enqueue and
> >                          * dequeue operation.
> >                          * The value must be in the range of
> >                          * [0, nb_event_queue_flows - 1] which
> >                          * previously supplied to
> >                          * rte_event_dev_configure().
> >                          */
> > -                       uint32_t sub_event_type:8;
> > -                       /**< Sub-event types based on the event source.
> > -                        * @see RTE_EVENT_TYPE_CPU
> > -                        */
> >                         uint32_t event_type:4;
> >                         /**< Event type to classify the event source.
> >                          * @see RTE_EVENT_TYPE_ETHDEV,
> >                          * (RTE_EVENT_TYPE_*)
> > @@ -935,13 +931,16 @@ struct rte_event {
> >                          * associated with flow id on a given event
> >                          * queue
> >                          * for the enqueue and dequeue operation.
> >                          */
> > -                       uint8_t queue_id;
> > -                       /**< Targeted event queue identifier for the enqueue or
> > -                        * dequeue operation.
> > -                        * The value must be in the range of
> > -                        * [0, nb_event_queues - 1] which previously supplied to
> > -                        * rte_event_dev_configure().
> > -                        */
> > +                       union {
> > +                               uint8_t queue_id;
> > +                               /**< Targeted event queue identifier for the enqueue or
> > +                                * dequeue operation.
> > +                                * The value must be in the range of
> > +                                * [0, nb_event_queues - 1] which previously supplied to
> > +                                * rte_event_dev_configure().
> > +                                */
> > +                               uint8_t next_stage;
> > +                       }
> > 
> > 
> I'm not sure about this. Wouldn't this break your use-case, since the
> queue_id and the next_stage have to be the same? I thought you always
> enqueued to the same queue, just with a different next_stage value.

I thought to create mode in configuration stage as mutually exclusive.
i.e. If device configured as sub_event_type based pipelining use
next_stage as sub_event_type else queue_id.


> 
> /Bruce
> 

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Nipun Gupta]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Wednesday, February 08, 2017 15:53
> To: Harry van Haaren <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org; Bruce Richardson <bruce.richardson@intel.com>; David
> Hunt <david.hunt@intel.com>; Nipun Gupta <nipun.gupta@nxp.com>; Hemant
> Agrawal <hemant.agrawal@nxp.com>; gage.eads@intel.com
> Subject: Re: [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver
> 
> On Tue, Jan 31, 2017 at 04:14:33PM +0000, Harry van Haaren wrote:
> > From: Bruce Richardson <bruce.richardson@intel.com>
> >
> > Since the sw driver is a standalone lookaside device that has no HW
> > requirements, we can provide a set of unit tests that test its
> > functionality across the different queue types and with different input
> > scenarios.
> >
> 
> Thanks for SW driver specific test cases. It provided me a good insight
> of expected application behavior from SW driver perspective and in turn it
> created
> some challenge in portable applications.
> 
> I would like highlight a main difference between the implementation and get a
> consensus on how to abstract it?
> 
> Based on existing header file, We can do event pipelining in two different ways
> a) Flow-based event pipelining
> b) queue_id based event pipelining
> 
> I will provide an example to showcase application flow in both modes.
> Based on my understanding from SW driver source code, it supports only
> queue_id based event pipelining. I guess, Flow based event pipelining will
> work semantically with SW driver but it will be very slow.
> 
> I think, the reason for the difference is the capability of the context definition.
> SW model the context is - queue_id
> Cavium HW model the context is queue_id + flow_id + sub_event_type +
> event_type
> 
> AFAIK, queue_id based event pipelining will work with NXP HW but I am not
> sure about flow based event pipelining model with NXP HW. Appreciate any
> input this?

[Nipun] Yes Jerin, that's right. NXP HW will not be suitable for flow based event pipelining.

> 
> In Cavium HW, We support both modes.
> 
> As an open question, Should we add a capability flag to advertise the supported
> models and let application choose the model based on implementation
> capability. The
> downside is, a small portion of stage advance code will be different but we
> can reuse the STAGE specific application code(I think it a fair
> trade off)
> 
> Bruce, Harry, Gage, Hemant, Nipun
> Thoughts? Or any other proposal?
> 
> I will take an non trivial realworld NW use case show the difference.
> A standard IPSec outbound processing will have minimum 4 to 5 stages
> 
> stage_0:
> --------
> a) Takes the pkts from ethdev and push to eventdev as
> RTE_EVENT_OP_NEW
> b) Some HW implementation, This will be done by HW. In SW implementation
> it done by service cores
> 
> stage_1:(ORDERED)
> ------------------
> a) Receive pkts from stage_0 in ORDERED flow and it process in parallel on N
> of cores
> b) Find a SA belongs that packet move to next stage for SA specific
> outbound operations.Outbound processing starts with updating the
> sequence number in the critical section and followed by packet encryption in
> parallel.
> 
> stage_2(ATOMIC) based on SA
> ----------------------------
> a) Update the sequence number and move to ORDERED sched_type for packet
> encryption in parallel
> 
> stage_3(ORDERED) based on SA
> ----------------------------
> a) Encrypt the packets in parallel
> b) Do output route look-up and figure out tx port and queue to transmit
> the packet
> c) Move to ATOMIC stage based on tx port and tx queue_id to transmit
> the packet _without_ losing the ingress ordering
> 
> stage_4(ATOMIC) based on tx port/tx queue
> -----------------------------------------
> a) enqueue the encrypted packet to ethdev tx port/tx_queue
> 
> 
> 1) queue_id based event pipelining
> =================================
> 
> stage_1_work(assigned to event queue 1)# N ports/N cores establish
> link to queue 1 through rte_event_port_link()
> 
> on_each_cores_linked_to_queue1(stage1)
> while(1)
> {
>                 /* STAGE 1 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
>                                 continue;
> 
>                 sa = find_sa_from_packet(ev.mbuf);
> 
>                 /* move to next stage(ATOMIC) */
>                 ev.event_type = RTE_EVENT_TYPE_CPU;
>                 ev.sub_event_type = 2;
>                 ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
>                 ev.flow_id =  sa;
>                 ev.op = RTE_EVENT_OP_FORWARD;
>                 ev.queue_id = 2;
>                 /* move to stage 2(event queue 2) */
>                 rte_event_enqueue_burst(ev,..);
> }
> 
> on_each_cores_linked_to_queue2(stage2)
> while(1)
> {
>                 /* STAGE 2 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
> 			continue;
> 
>                 sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq number
> update in critical section */
> 
>                 /* move to next stage(ORDERED) */
>                 ev.event_type = RTE_EVENT_TYPE_CPU;
>                 ev.sub_event_type = 3;
>                 ev.sched_type = RTE_SCHED_TYPE_ORDERED;
>                 ev.flow_id =  sa;

[Nipun] Queue1 has flow_id as an 'sa' with sched_type as RTE_SCHED_TYPE_ATOMIC and
Queue2 has same flow_id but with sched_type as RTE_SCHED_TYPE_ORDERED.
Does this mean that same flow_id be associated with separate RTE_SCHED_TYPE_* as sched_type?

My understanding is that one flow can either be parallel or atomic or ordered.
The rte_eventdev.h states that sched_type is associated with flow_id, which also seems legitimate:
		uint8_t sched_type:2;
		/**< Scheduler synchronization type (RTE_SCHED_TYPE_*)
		 * associated with flow id on a given event queue
		 * for the enqueue and dequeue operation.
		 */

>                 ev.op = RTE_EVENT_OP_FORWARD;
>                 ev.queue_id = 3;
>                 /* move to stage 3(event queue 3) */
>                 rte_event_enqueue_burst(ev,..);
> }
> 
> on_each_cores_linked_to_queue3(stage3)
> while(1)
> {
>                 /* STAGE 3 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
> 			continue;
> 
>                 sa_specific_ordered_processing(sa /*ev.flow_id */);/* packets
> encryption in parallel */
> 
>                 /* move to next stage(ATOMIC) */
>                 ev.event_type = RTE_EVENT_TYPE_CPU;
>                 ev.sub_event_type = 4;
>                 ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> 		output_tx_port_queue =
> find_output_tx_queue_and_tx_port(ev.mbuff);
>                 ev.flow_id =  output_tx_port_queue;
>                 ev.op = RTE_EVENT_OP_FORWARD;
>                 ev.queue_id = 4;
>                 /* move to stage 4(event queue 4) */
>                 rte_event_enqueue_burst(ev,...);
> }
> 
> on_each_cores_linked_to_queue4(stage4)
> while(1)
> {
>                 /* STAGE 4 processing */
>                 nr_events = rte_event_dequeue_burst(ev,..);
>                 if (!nr_events);
> 			continue;
> 
> 		rte_eth_tx_buffer();
> }
> 
> 2) flow-based event pipelining
> =============================
> 
> - No need to partition queues for different stages
> - All the cores can operate on all the stages, Thus enables
> automatic multicore scaling, true dynamic load balancing,
> - Fairly large number of SA(kind of 2^16 to 2^20) can be processed in parallel
> Something existing IPSec application has constraints on
> http://dpdk.org/doc/guides-16.04/sample_app_ug/ipsec_secgw.html
> 
> on_each_worker_cores()
> while(1)
> {
> 	rte_event_dequeue_burst(ev,..)
> 	if (!nr_events);
> 		continue;
> 
> 	/* STAGE 1 processing */
> 	if(ev.event_type == RTE_EVENT_TYPE_ETHDEV) {
> 		sa = find_it_from_packet(ev.mbuf);
> 		/* move to next stage2(ATOMIC) */
> 		ev.event_type = RTE_EVENT_TYPE_CPU;
> 		ev.sub_event_type = 2;
> 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> 		ev.flow_id =  sa;
> 		ev.op = RTE_EVENT_OP_FORWARD;
> 		rte_event_enqueue_burst(ev..);
> 
> 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU &&
> ev.sub_event_type == 2) { /* stage 2 */

[Nipun] I didn't got that in this case on which event queue (and eventually
its associated event ports) will the RTE_EVENT_TYPE_CPU type events be received on?

Adding on to what Harry also mentions in other mail, If same code is run in the case you
mentioned in '#1 - queue_id based event pipelining', after specifying the ev.queue_id
with appropriate value then also #1 would be good. Isn't it?

> 
> 		sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq
> number update in critical section */
> 		/* move to next stage(ORDERED) */
> 		ev.event_type = RTE_EVENT_TYPE_CPU;
> 		ev.sub_event_type = 3;
> 		ev.sched_type = RTE_SCHED_TYPE_ORDERED;
> 		ev.flow_id =  sa;
> 		ev.op = RTE_EVENT_OP_FORWARD;
> 		rte_event_enqueue_burst(ev,..);
> 
> 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU &&
> ev.sub_event_type == 3) { /* stage 3 */
> 
> 		sa_specific_ordered_processing(sa /* ev.flow_id */);/* like
> encrypting packets in parallel */
> 		/* move to next stage(ATOMIC) */
> 		ev.event_type = RTE_EVENT_TYPE_CPU;
> 		ev.sub_event_type = 4;
> 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> 		output_tx_port_queue =
> find_output_tx_queue_and_tx_port(ev.mbuff);
> 		ev.flow_id =  output_tx_port_queue;
> 		ev.op = RTE_EVENT_OP_FORWARD;
> 		rte_event_enqueue_burst(ev,..);
> 
> 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU &&
> ev.sub_event_type == 4) { /* stage 4 */
> 		rte_eth_tx_buffer();
> 	}
> }
> 
> /Jerin
> Cavium

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Jerin Jacob]

On Wed, Feb 08, 2017 at 06:02:26PM +0000, Nipun Gupta wrote:
> 
> 
> > -----Original Message-----
> > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > Sent: Wednesday, February 08, 2017 15:53
> > To: Harry van Haaren <harry.van.haaren@intel.com>
> > Cc: dev@dpdk.org; Bruce Richardson <bruce.richardson@intel.com>; David
> > Hunt <david.hunt@intel.com>; Nipun Gupta <nipun.gupta@nxp.com>; Hemant
> > }
> > 
> > on_each_cores_linked_to_queue2(stage2)
> > while(1)
> > {
> >                 /* STAGE 2 processing */
> >                 nr_events = rte_event_dequeue_burst(ev,..);
> >                 if (!nr_events);
> > 			continue;
> > 
> >                 sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq number
> > update in critical section */
> > 
> >                 /* move to next stage(ORDERED) */
> >                 ev.event_type = RTE_EVENT_TYPE_CPU;
> >                 ev.sub_event_type = 3;
> >                 ev.sched_type = RTE_SCHED_TYPE_ORDERED;
> >                 ev.flow_id =  sa;
> 
> [Nipun] Queue1 has flow_id as an 'sa' with sched_type as RTE_SCHED_TYPE_ATOMIC and
> Queue2 has same flow_id but with sched_type as RTE_SCHED_TYPE_ORDERED.
> Does this mean that same flow_id be associated with separate RTE_SCHED_TYPE_* as sched_type?
> 
> My understanding is that one flow can either be parallel or atomic or ordered.
> The rte_eventdev.h states that sched_type is associated with flow_id, which also seems legitimate:

Yes. flow_id per _event queue_.

> 		uint8_t sched_type:2;
> 		/**< Scheduler synchronization type (RTE_SCHED_TYPE_*)
> 		 * associated with flow id on a given event queue
> 		 * for the enqueue and dequeue operation.
> 		 */
> 
> >                 ev.op = RTE_EVENT_OP_FORWARD;
> >                 ev.queue_id = 3;
> >                 /* move to stage 3(event queue 3) */
> >                 rte_event_enqueue_burst(ev,..);
> > }
> > 
> > on_each_cores_linked_to_queue3(stage3)
> > while(1)
> > {
> >                 /* STAGE 3 processing */
> >                 nr_events = rte_event_dequeue_burst(ev,..);
> >                 if (!nr_events);
> > 			continue;
> > 
> >                 sa_specific_ordered_processing(sa /*ev.flow_id */);/* packets
> > encryption in parallel */
> > 
> >                 /* move to next stage(ATOMIC) */
> >                 ev.event_type = RTE_EVENT_TYPE_CPU;
> >                 ev.sub_event_type = 4;
> >                 ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > 		output_tx_port_queue =
> > find_output_tx_queue_and_tx_port(ev.mbuff);
> >                 ev.flow_id =  output_tx_port_queue;
> >                 ev.op = RTE_EVENT_OP_FORWARD;
> >                 ev.queue_id = 4;
> >                 /* move to stage 4(event queue 4) */
> >                 rte_event_enqueue_burst(ev,...);
> > }
> > 
> > on_each_cores_linked_to_queue4(stage4)
> > while(1)
> > {
> >                 /* STAGE 4 processing */
> >                 nr_events = rte_event_dequeue_burst(ev,..);
> >                 if (!nr_events);
> > 			continue;
> > 
> > 		rte_eth_tx_buffer();
> > }
> > 
> > 2) flow-based event pipelining
> > =============================
> > 
> > - No need to partition queues for different stages
> > - All the cores can operate on all the stages, Thus enables
> > automatic multicore scaling, true dynamic load balancing,
> > - Fairly large number of SA(kind of 2^16 to 2^20) can be processed in parallel
> > Something existing IPSec application has constraints on
> > http://dpdk.org/doc/guides-16.04/sample_app_ug/ipsec_secgw.html
> > 
> > on_each_worker_cores()
> > while(1)
> > {
> > 	rte_event_dequeue_burst(ev,..)
> > 	if (!nr_events);
> > 		continue;
> > 
> > 	/* STAGE 1 processing */
> > 	if(ev.event_type == RTE_EVENT_TYPE_ETHDEV) {
> > 		sa = find_it_from_packet(ev.mbuf);
> > 		/* move to next stage2(ATOMIC) */
> > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > 		ev.sub_event_type = 2;
> > 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > 		ev.flow_id =  sa;
> > 		ev.op = RTE_EVENT_OP_FORWARD;
> > 		rte_event_enqueue_burst(ev..);
> > 
> > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU &&
> > ev.sub_event_type == 2) { /* stage 2 */
> 
> [Nipun] I didn't got that in this case on which event queue (and eventually
> its associated event ports) will the RTE_EVENT_TYPE_CPU type events be received on?

Yes. The same queue which received the event.

> 
> Adding on to what Harry also mentions in other mail, If same code is run in the case you
> mentioned in '#1 - queue_id based event pipelining', after specifying the ev.queue_id
> with appropriate value then also #1 would be good. Isn't it?

See my earlier email

> 
> > 
> > 		sa_specific_atomic_processing(sa /* ev.flow_id */);/* seq
> > number update in critical section */
> > 		/* move to next stage(ORDERED) */
> > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > 		ev.sub_event_type = 3;
> > 		ev.sched_type = RTE_SCHED_TYPE_ORDERED;
> > 		ev.flow_id =  sa;
> > 		ev.op = RTE_EVENT_OP_FORWARD;
> > 		rte_event_enqueue_burst(ev,..);
> > 
> > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU &&
> > ev.sub_event_type == 3) { /* stage 3 */
> > 
> > 		sa_specific_ordered_processing(sa /* ev.flow_id */);/* like
> > encrypting packets in parallel */
> > 		/* move to next stage(ATOMIC) */
> > 		ev.event_type = RTE_EVENT_TYPE_CPU;
> > 		ev.sub_event_type = 4;
> > 		ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > 		output_tx_port_queue =
> > find_output_tx_queue_and_tx_port(ev.mbuff);
> > 		ev.flow_id =  output_tx_port_queue;
> > 		ev.op = RTE_EVENT_OP_FORWARD;
> > 		rte_event_enqueue_burst(ev,..);
> > 
> > 	} else if(ev.event_type == RTE_EVENT_TYPE_CPU &&
> > ev.sub_event_type == 4) { /* stage 4 */
> > 		rte_eth_tx_buffer();
> > 	}
> > }
> > 
> > /Jerin
> > Cavium
> 

Re: [dpdk-dev] [PATCH v2 15/15] app/test: add unit tests for SW eventdev driver

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:33PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Since the sw driver is a standalone lookaside device that has no HW
> requirements, we can provide a set of unit tests that test its
> functionality across the different queue types and with different input
> scenarios.
> 
> This also adds the tests to be automatically run by autotest.py
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: David Hunt <david.hunt@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  app/test/Makefile           |    5 +-
>  app/test/autotest_data.py   |   26 +
>  app/test/test_sw_eventdev.c | 2071 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 2101 insertions(+), 1 deletion(-)
>  create mode 100644 app/test/test_sw_eventdev.c
> 
> diff --git a/app/test/Makefile b/app/test/Makefile
> index e28c079..1770c09 100644
> --- a/app/test/Makefile
> +++ b/app/test/Makefile
> @@ -197,7 +197,10 @@ SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
>  SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_perf.c
>  SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
>  
> -SRCS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += test_eventdev.c
> +ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
> +SRCS-y += test_eventdev.c
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += test_sw_eventdev.c

IMO, In order to make symmetrical with cryptodev test cases, We need to change
the name to test_eventdev_sw.c

Another open question is, Should we allow driver specific test cases?
I think, It is OK till we have mature generic unit test cases. Once we
have driver specific test case from multiple implementations then we can think of
converging all. What you think?

> +endif
>  
>  SRCS-$(CONFIG_RTE_LIBRTE_KVARGS) += test_kvargs.c

Re: [dpdk-dev] [PATCH v2 00/15] next-eventdev: event/sw software eventdev

[Jerin Jacob]

On Tue, Jan 31, 2017 at 04:14:18PM +0000, Harry van Haaren wrote:
> The following patchset adds software eventdev implementation
> to the next-eventdev tree.
> 
> This implementation is based on the previous software eventdev
> v1 patchset, now with comments addressed:
> 1) xstats api return values changed to be consistent
> 2) xstats api [out] added to appropriate values
> 3) xstats api now uses xxx_get() for consistency
> 4) patch names for check-log.sh

Nice to have name the in bracket who suggested it.

> 5) checkpatch issues resolved (where it makes sense to, there are
>    certain places where fixing checkpatch makes the code less readable.
>    These checkpatch warnings will still show up - I see no alternative)

I agree. Except a few lines in the test code with
rte_event_dev_xstats_by_name_get

> 
> In addition, the following improvements have been made to the patchset:
> 1) Adds test to run automatically with make test
> 2) Rework the sw implementation event credit scheme
> 
> The first two patches make changes to the eventdev API,
> then the software implementation is added, and finally
> tests are added for the sw eventdev implementation.

Two issue found in testing. If it makes sense, fix it in test code or
implementation

1) Running eventdev_common_autotest with event_sw0

sudo ./build/app/test  --vdev='event_sw0'
RTE>>eventdev_common_autotest

TestCase test_eventdev_port_setup() line 437 failed: Expected -EINVAL, 0
 + TestCase [11] : test_eventdev_port_setup failed 
 + TestCase [12] : test_eventdev_dequeue_depth succeeded
 + TestCase [13] : test_eventdev_enqueue_depth succeeded
 + TestCase [14] : test_eventdev_port_count succeeded
TestCase test_eventdev_timeout_ticks() line 522 failed (err -95): Fail
to get timeout_ticks
 + TestCase [15] : test_eventdev_timeout_ticks failed 
sw_start 543: queue 0 not configured
TestCase test_eventdev_start_stop() line 547 failed (err -1): Failed to
start device0
 + TestCase [16] : test_eventdev_start_stop failed 
sw_start 543: queue 0 not configured
TestCase eventdev_setup_device() line 573 failed (err -1): Failed to
start device0
EVENTDEV: rte_event_dev_stop() line 1026: Device with dev_id=0already
stopped
 + TestCase [17] : test_eventdev_link failed 
sw_start 543: queue 0 not configured
TestCase eventdev_setup_device() line 573 failed (err -1): Failed to
start device0
EVENTDEV: rte_event_dev_stop() line 1026: Device with dev_id=0already
stopped
 + TestCase [18] : test_eventdev_unlink failed 
sw_start 543: queue 0 not configured
TestCase eventdev_setup_device() line 573 failed (err -1): Failed to
start device0
EVENTDEV: rte_event_dev_stop() line 1026: Device with dev_id=0already
stopped
 + TestCase [19] : test_eventdev_link_get failed 
sw_start 543: queue 0 not configured
TestCase eventdev_setup_device() line 573 failed (err -1): Failed to
start device0
 + TestCase [20] : test_eventdev_close failed 
PMD: Initializing event_skeleton1 on NUMA node 0


2) back to back eventdev_sw_autotest invocation

RTE>>eventdev_sw_autotest 
1926: Eventdev event_sw0 not found - creating.
PMD: Creating eventdev sw device event_sw0, numa_node=0,
sched_quanta=128, credit_quanta=32
*** Running Single Directed Packet test...
*** Running Single Load Balanced Packet test...
*** Running Unordered Basic test...
*** Running Ordered Basic test...
*** Running Burst Packets test...
*** Running Load Balancing test...
*** Running Prioritized Directed test...
*** Running Prioritized Atomic test...
*** Running Prioritized Ordered test...
*** Running Prioritized Unordered test...
*** Running Invalid QID test...
*** Running Load Balancing History test...
*** Running Inflight Count test...
*** Running Abuse Inflights test...
*** Running QID Priority test...
*** Running Head-of-line-blocking test...
*** Running Worker loopback test...
1791: 	Producer function started
1731: 	Worker function started
1889: 	Sched Rx = 10713728, Tx = 10713248
1889: 	Sched Rx = 21422880, Tx = 21422400
1889: 	Sched Rx = 32066688, Tx = 32066208
Test OK
RTE>>eventdev_
 eventdev_common_autotest [Mul-choice STRING]: launch autotest
 eventdev_sw_autotest [Mul-choice STRING]: launch autotest
RTE>>eventdev_sw_autotest 
*** Running Single Directed Packet test...
*** Running Single Load Balanced Packet test...
*** Running Unordered Basic test...
*** Running Ordered Basic test...
*** Running Burst Packets test...
*** Running Load Balancing test...
*** Running Prioritized Directed test...
*** Running Prioritized Atomic test...
*** Running Prioritized Ordered test...
*** Running Prioritized Unordered test...
*** Running Invalid QID test...
*** Running Load Balancing History test...
*** Running Inflight Count test...
*** Running Abuse Inflights test...
*** Running QID Priority test...
*** Running Head-of-line-blocking test...
*** Running Worker loopback test...
1791: 	Producer function started
1731: 	Worker function started
1889: 	Sched Rx = 502401, Tx = 501860
1889: 	Sched Rx = 502401, Tx = 501860
1889: 	Sched Rx = 502401, Tx = 501860
1889: 	Sched Rx = 502401, Tx = 501860
1889: 	Sched Rx = 502401, Tx = 501860
EventDev todo-fix-name: ports 2, qids 8
	rx   502401
	drop 0
	tx   501860
	sched calls: 6797287
	sched cq/qid call: 6818630
	sched no IQ enq: 6783503
	sched no CQ enq: 6781603
	inflight 4000, credits: 96
  Port 0 
	rx   4637	drop 0	tx   0	inflight 0
	Avg cycles PP: 0	Credits: 3
	Receive burst distribution:
		0:-nan% 
	rx ring used:    0	free: 4096
	cq ring used:    0	free:   32
  Port 1 
	rx   497764	drop 0	tx   501860	inflight 4096
	Avg cycles PP: 99	Credits: 33
	Receive burst distribution:
		0:100% 1-4:0.00% 29-32:0.01% 
	rx ring used: 4068	free:   28
	cq ring used:    0	free:   32
  Queue 0 (Atomic)
	rx   63682	drop 0	tx   63652
	Inflights: 642	Flows pinned per port: 0 638 
	iq 0: Used 30	Free 481
  Queue 1 (Atomic)
	rx   63010	drop 0	tx   63010
	Inflights: 0	Flows pinned per port: 0 0 
	-- iqs empty --
  Queue 2 (Atomic)
	rx   63010	drop 0	tx   63010
	Inflights: 0	Flows pinned per port: 0 0 
	-- iqs empty --
  Queue 3 (Atomic)
	rx   63010	drop 0	tx   63010
	Inflights: 0	Flows pinned per port: 0 0 
	-- iqs empty --
  Queue 4 (Atomic)
	rx   63010	drop 0	tx   63010
	Inflights: 0	Flows pinned per port: 0 0 
	-- iqs empty --
  Queue 5 (Atomic)
	rx   63010	drop 0	tx   63010
	Inflights: 0	Flows pinned per port: 0 0 
	-- iqs empty --
  Queue 6 (Atomic)
	rx   63010	drop 0	tx   63010
	Inflights: 2351	Flows pinned per port: 0 1009 
	-- iqs empty --
  Queue 7 (Atomic)
	rx   60659	drop 0	tx   60148
	Inflights: 1103	Flows pinned per port: 0 937 
	iq 0: Used 511	Free 0
1899: No schedules for seconds, deadlock
ERROR - Worker loopback test FAILED.
Test Failed
RTE>>[


> 
> This patchset contains the work of multiple developers,
> please see signoffs on each patch.
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> 
> 
> Bruce Richardson (15):
>   eventdev: remove unneeded dependencies
>   eventdev: add APIs for extended stats
>   event/sw: add new software-only eventdev driver
>   event/sw: add device capabilities function
>   event/sw: add configure function
>   event/sw: add fns to return default port/queue config
>   event/sw: add support for event queues
>   event/sw: add support for event ports
>   event/sw: add support for linking queues to ports
>   event/sw: add worker core functions
>   event/sw: add scheduling logic
>   event/sw: add start stop and close functions
>   event/sw: add dump function for easier debugging
>   event/sw: add xstats support
>   app/test: add unit tests for SW eventdev driver
> 
>  app/test/Makefile                             |    5 +-
>  app/test/autotest_data.py                     |   26 +
>  app/test/test_sw_eventdev.c                   | 2071 +++++++++++++++++++++++++
>  config/common_base                            |    5 +
>  drivers/event/Makefile                        |    1 +
>  drivers/event/sw/Makefile                     |   69 +
>  drivers/event/sw/event_ring.h                 |  179 +++
>  drivers/event/sw/iq_ring.h                    |  176 +++
>  drivers/event/sw/rte_pmd_evdev_sw_version.map |    3 +
>  drivers/event/sw/sw_evdev.c                   |  754 +++++++++
>  drivers/event/sw/sw_evdev.h                   |  291 ++++
>  drivers/event/sw/sw_evdev_scheduler.c         |  602 +++++++
>  drivers/event/sw/sw_evdev_worker.c            |  186 +++
>  drivers/event/sw/sw_evdev_xstats.c            |  404 +++++
>  lib/librte_eventdev/Makefile                  |    1 -
>  lib/librte_eventdev/rte_eventdev.c            |   63 +
>  lib/librte_eventdev/rte_eventdev.h            |   85 +-
>  lib/librte_eventdev/rte_eventdev_pmd.h        |   60 +
>  lib/librte_eventdev/rte_eventdev_version.map  |    3 +
>  mk/rte.app.mk                                 |    1 +
>  20 files changed, 4981 insertions(+), 4 deletions(-)
>  create mode 100644 app/test/test_sw_eventdev.c
>  create mode 100644 drivers/event/sw/Makefile
>  create mode 100644 drivers/event/sw/event_ring.h
>  create mode 100644 drivers/event/sw/iq_ring.h
>  create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
>  create mode 100644 drivers/event/sw/sw_evdev.c
>  create mode 100644 drivers/event/sw/sw_evdev.h
>  create mode 100644 drivers/event/sw/sw_evdev_scheduler.c
>  create mode 100644 drivers/event/sw/sw_evdev_worker.c
>  create mode 100644 drivers/event/sw/sw_evdev_xstats.c
> 
> -- 
> 2.7.4
> 

Re: [dpdk-dev] [PATCH v2 00/15] next-eventdev: event/sw software eventdev

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Monday, February 6, 2017 8:07 AM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org
> Subject: Re: [PATCH v2 00/15] next-eventdev: event/sw software eventdev
> 
> On Tue, Jan 31, 2017 at 04:14:18PM +0000, Harry van Haaren wrote:
> > The following patchset adds software eventdev implementation
> > to the next-eventdev tree.
> >
> > This implementation is based on the previous software eventdev
> > v1 patchset, now with comments addressed:
> > 1) xstats api return values changed to be consistent
> > 2) xstats api [out] added to appropriate values
> > 3) xstats api now uses xxx_get() for consistency
> > 4) patch names for check-log.sh
> 
> Nice to have name the in bracket who suggested it.

Agreed - an oversight on my part. For future readers,
the above suggestions on the v1 patchset came from Jerin - thanks for the review of v1 (and now v2 :)

<snip> actual review comments </snip>

Comments will be addressed in v3, hoping to send it later this week. -Harry

[dpdk-dev] [PATCH v3 00/17] next-eventdev: event/sw software eventdev

[Harry van Haaren]

The following patchset adds software eventdev implementation
to the next-eventdev tree.

This implementation is based on the previous software eventdev
v2 patchset, now with comments addressed:
1) Fixed queue configure in single link, returning -EDQOUT (Jerin)
2) SW_SCHED_TYPE_DIRECT now in SW_ namespace (Jerin)
3) SW_PMD_NAME now in SW_ namespace (Jerin)
4) Replaced printfs with SW_LOG() to report errors (Jerin)
5) Update version map to 17.05 (Jerin)
6) Fixed back-to-back tests of event/sw (Jerin)
7) checkpatch issues in v2 of xstats() (Jerin)
8) Updated link() and unlink() functions to accept dev* parameter
9) Fixed bug in load-balanced port credits returning (Gage)
a) Fixed segfault if dump() called before fully configured (Vipin)
b) Removed extern sched_quanta, now tracked internally in state
c) Added compiler barriers to qe_ring datastructures
d) vdev uninit() as implemented in next-eventdev is now supported (Jerin)
c) xstats get() API has "mode" to select dev, port or queue stats (Jerin)
e) xstats reset() added (Jerin)
f) Renamed test_sw_eventdev.c to test_eventdev_sw.c (Jerin)

The first three patches in the series make new changes to the eventdev
API and tests that were not present in the v2 patchset. This was required
to pass the unit tests and provide correct behaviour of eventdev layer
checks of the event/sw implementation:
0) Fix timeout ticks test to return -ENOTSUP if dev doesn't support it
1) Increase the enqueue depth in dev_config and port_conf
2) Create dummy Links before start stop test (details in commit msg)

Next then the software implementation is added, and finally
more tests are added for the sw eventdev implementation.

Git log is clean, while checkpatch issues:
2 Errors on Complex Macro (which I beleive cannot be fixed)
4 Warnings in the scheduler logic, which reduce readability when fixed.

This patchset contains the work of multiple developers,
please see signoffs on each patch.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>




Bruce Richardson (14):
  eventdev: add APIs for extended stats
  event/sw: add new software-only eventdev driver
  event/sw: add device capabilities function
  event/sw: add configure function
  event/sw: add fns to return default port/queue config
  event/sw: add support for event queues
  event/sw: add support for event ports
  event/sw: add support for linking queues to ports
  event/sw: add worker core functions
  event/sw: add scheduling logic
  event/sw: add start stop and close functions
  event/sw: add dump function for easier debugging
  event/sw: add xstats support
  app/test: add unit tests for SW eventdev driver

Harry van Haaren (3):
  eventdev: fix API docs and test for timeout ticks
  eventdev: increase size of enq deq conf variables
  app/test: eventdev link all queues before start

 app/test/Makefile                             |    5 +-
 app/test/autotest_data.py                     |   26 +
 app/test/test_eventdev.c                      |   20 +-
 app/test/test_eventdev_sw.c                   | 2249 +++++++++++++++++++++++++
 config/common_base                            |    5 +
 drivers/event/Makefile                        |    1 +
 drivers/event/sw/Makefile                     |   69 +
 drivers/event/sw/event_ring.h                 |  185 ++
 drivers/event/sw/iq_ring.h                    |  176 ++
 drivers/event/sw/rte_pmd_evdev_sw_version.map |    3 +
 drivers/event/sw/sw_evdev.c                   |  793 +++++++++
 drivers/event/sw/sw_evdev.h                   |  306 ++++
 drivers/event/sw/sw_evdev_scheduler.c         |  602 +++++++
 drivers/event/sw/sw_evdev_worker.c            |  188 +++
 drivers/event/sw/sw_evdev_xstats.c            |  511 ++++++
 lib/librte_eventdev/rte_eventdev.c            |   78 +
 lib/librte_eventdev/rte_eventdev.h            |  130 +-
 lib/librte_eventdev/rte_eventdev_pmd.h        |   70 +
 lib/librte_eventdev/rte_eventdev_version.map  |    4 +
 mk/rte.app.mk                                 |    1 +
 20 files changed, 5415 insertions(+), 7 deletions(-)
 create mode 100644 app/test/test_eventdev_sw.c
 create mode 100644 drivers/event/sw/Makefile
 create mode 100644 drivers/event/sw/event_ring.h
 create mode 100644 drivers/event/sw/iq_ring.h
 create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
 create mode 100644 drivers/event/sw/sw_evdev.c
 create mode 100644 drivers/event/sw/sw_evdev.h
 create mode 100644 drivers/event/sw/sw_evdev_scheduler.c
 create mode 100644 drivers/event/sw/sw_evdev_worker.c
 create mode 100644 drivers/event/sw/sw_evdev_xstats.c

-- 
2.7.4

[dpdk-dev] [PATCH v3 01/17] eventdev: fix API docs and test for timeout ticks

[Harry van Haaren]

This commit improves the documentation of the api return
values for rte_event_dequeue_timeout_ticks(), and allows
-ENOTSUP to be returned by devices which do not support
timeouts.

The unit test is modified to accept -ENOTSUP as a pass,
as the device doesn't implement the timeout_ticks function.

Fixes: 4c9a26e419a7 ("app/test: unit test case for eventdev APIs")

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 app/test/test_eventdev.c           | 4 +++-
 lib/librte_eventdev/rte_eventdev.h | 6 ++++--
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
index 042a446..756bc32 100644
--- a/app/test/test_eventdev.c
+++ b/app/test/test_eventdev.c
@@ -519,7 +519,9 @@ test_eventdev_timeout_ticks(void)
 	uint64_t timeout_ticks;
 
 	ret = rte_event_dequeue_timeout_ticks(TEST_DEV_ID, 100, &timeout_ticks);
-	TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
+	/* -ENOTSUP is a valid return if timeout is not supported by device  */
+	if (ret != -ENOTSUP)
+		TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
 
 	return TEST_SUCCESS;
 }
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index b619160..b0c7f9c 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -1158,7 +1158,9 @@ rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
  *
  * @return
  *  - 0 on success.
- *  - <0 on failure.
+ *  - -ENOTSUP if the device doesn't support timeouts.
+ *  - -EINVAL if *dev_id* is invalid or *timeout_ticks* is a null pointer.
+ *  - other values < 0 on failure.
  *
  * @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
  * @see rte_event_dev_configure()
@@ -1166,7 +1168,7 @@ rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
  */
 int
 rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns,
-					uint64_t *timeout_ticks);
+				uint64_t *timeout_ticks);
 
 /**
  * Dequeue a burst of events objects or an event object from the event port
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3 01/17] eventdev: fix API docs and test for timeout ticks

[Mcnamara, John]

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Harry van Haaren
> Sent: Friday, February 17, 2017 2:54 PM
> To: dev@dpdk.org
> Cc: jerin.jacob@caviumnetworks.com; Van Haaren, Harry
> <harry.van.haaren@intel.com>
> Subject: [dpdk-dev] [PATCH v3 01/17] eventdev: fix API docs and test for
> timeout ticks
> 
> This commit improves the documentation of the api return values for
> rte_event_dequeue_timeout_ticks(), and allows -ENOTSUP to be returned by
> devices which do not support timeouts.
> 
> The unit test is modified to accept -ENOTSUP as a pass, as the device
> doesn't implement the timeout_ticks function.
> 
> Fixes: 4c9a26e419a7 ("app/test: unit test case for eventdev APIs")
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>


Acked-by: John McNamara <john.mcnamara@intel.com>

Re: [dpdk-dev] [PATCH v3 01/17] eventdev: fix API docs and test for timeout ticks

[Jerin Jacob]

On Fri, Feb 17, 2017 at 02:53:56PM +0000, Harry van Haaren wrote:
> This commit improves the documentation of the api return
> values for rte_event_dequeue_timeout_ticks(), and allows
> -ENOTSUP to be returned by devices which do not support
> timeouts.
> 
> The unit test is modified to accept -ENOTSUP as a pass,
> as the device doesn't implement the timeout_ticks function.
> 
> Fixes: 4c9a26e419a7 ("app/test: unit test case for eventdev APIs")
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  app/test/test_eventdev.c           | 4 +++-
>  lib/librte_eventdev/rte_eventdev.h | 6 ++++--
>  2 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
> index 042a446..756bc32 100644
> --- a/app/test/test_eventdev.c
> +++ b/app/test/test_eventdev.c
> @@ -519,7 +519,9 @@ test_eventdev_timeout_ticks(void)
>  	uint64_t timeout_ticks;
>  
>  	ret = rte_event_dequeue_timeout_ticks(TEST_DEV_ID, 100, &timeout_ticks);
> -	TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
> +	/* -ENOTSUP is a valid return if timeout is not supported by device  */
> +	if (ret != -ENOTSUP)
> +		TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");

Header file change looks good. IMO, In the test case, We can introduce
TEST_UNSUPPORTED in addition to TEST_SUCCESS and TEST_FAILED to reflect
the actual status. I guess it will useful for future tests as well.

If you agree with that then you can post the header file change as separate
patch. For header file change,
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

>  
>  	return TEST_SUCCESS;
>  }
> diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> index b619160..b0c7f9c 100644
> --- a/lib/librte_eventdev/rte_eventdev.h
> +++ b/lib/librte_eventdev/rte_eventdev.h
> @@ -1158,7 +1158,9 @@ rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
>   *
>   * @return
>   *  - 0 on success.
> - *  - <0 on failure.
> + *  - -ENOTSUP if the device doesn't support timeouts.
> + *  - -EINVAL if *dev_id* is invalid or *timeout_ticks* is a null pointer.
> + *  - other values < 0 on failure.
>   *
>   * @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
>   * @see rte_event_dev_configure()
> @@ -1166,7 +1168,7 @@ rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
>   */
>  int
>  rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns,
> -					uint64_t *timeout_ticks);
> +				uint64_t *timeout_ticks);
>  
>  /**
>   * Dequeue a burst of events objects or an event object from the event port
> -- 
> 2.7.4
> 

Re: [dpdk-dev] [PATCH v3 01/17] eventdev: fix API docs and test for timeout ticks

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Monday, March 6, 2017 10:34 AM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Subject: Re: [PATCH v3 01/17] eventdev: fix API docs and test for timeout ticks

<snip>

> >  	ret = rte_event_dequeue_timeout_ticks(TEST_DEV_ID, 100, &timeout_ticks);
> > -	TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
> > +	/* -ENOTSUP is a valid return if timeout is not supported by device  */
> > +	if (ret != -ENOTSUP)
> > +		TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
> 
> Header file change looks good. IMO, In the test case, We can introduce
> TEST_UNSUPPORTED in addition to TEST_SUCCESS and TEST_FAILED to reflect
> the actual status. I guess it will useful for future tests as well.

Adding TEST_UNSUPPORTED requires a larger changeset than software eventdev should
make to the test infrastructure; my preference is to use the error check solution
as above for v4 patchset.

Rework of testing infrastructure should be done on mainline dpdk if deemed required,
and enable on Eventdev branch after a rebase.

[dpdk-dev] [PATCH] eventdev: improve API docs for timeout ticks

[Harry van Haaren]

Improve the documentation of the return values of the
rte_event_dequeue_timeout_ticks() function, adding a
-ENOTSUP value for eventdevs that do not support waiting.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

---

Discussion and previous Acked from:
http://dpdk.org/ml/archives/dev/2017-March/059419.html
---
 lib/librte_eventdev/rte_eventdev.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index 7073987..bb216b4 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -1158,7 +1158,9 @@ rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
  *
  * @return
  *  - 0 on success.
- *  - <0 on failure.
+ *  - -ENOTSUP if the device doesn't support timeouts
+ *  - -EINVAL if *dev_id* is invalid or *timeout_ticks* is NULL
+ *  - other values < 0 on failure.
  *
  * @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
  * @see rte_event_dev_configure()
-- 
2.7.4

Re: [dpdk-dev] [PATCH] eventdev: improve API docs for timeout ticks

[Jerin Jacob]

On Wed, Mar 08, 2017 at 10:35:34AM +0000, Harry van Haaren wrote:
> Improve the documentation of the return values of the
> rte_event_dequeue_timeout_ticks() function, adding a
> -ENOTSUP value for eventdevs that do not support waiting.
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

Applied to dpdk-next-eventdev/master. Thanks.

> 
> ---
> 
> Discussion and previous Acked from:
> http://dpdk.org/ml/archives/dev/2017-March/059419.html
> ---
>  lib/librte_eventdev/rte_eventdev.h | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> index 7073987..bb216b4 100644
> --- a/lib/librte_eventdev/rte_eventdev.h
> +++ b/lib/librte_eventdev/rte_eventdev.h
> @@ -1158,7 +1158,9 @@ rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
>   *
>   * @return
>   *  - 0 on success.
> - *  - <0 on failure.
> + *  - -ENOTSUP if the device doesn't support timeouts
> + *  - -EINVAL if *dev_id* is invalid or *timeout_ticks* is NULL
> + *  - other values < 0 on failure.
>   *
>   * @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
>   * @see rte_event_dev_configure()
> -- 
> 2.7.4
> 

[dpdk-dev] [PATCH v3 02/17] eventdev: increase size of enq deq conf variables

[Harry van Haaren]

Large port enqueue sizes were not supported as the value
it was stored in was a uint8_t. Using uint8_ts to save
space in config apis makes no sense - increasing the 3
instances of uint8_t enqueue / dequeue depths to more
appropriate values (based on the context around them).

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 lib/librte_eventdev/rte_eventdev.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index b0c7f9c..8b6cb7a 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -426,7 +426,7 @@ struct rte_event_dev_config {
 	 * This value cannot exceed the *max_event_queue_flows* which previously
 	 * provided in rte_event_dev_info_get()
 	 */
-	uint8_t nb_event_port_dequeue_depth;
+	uint32_t nb_event_port_dequeue_depth;
 	/**< Maximum number of events can be dequeued at a time from an
 	 * event port by this device.
 	 * This value cannot exceed the *max_event_port_dequeue_depth*
@@ -637,12 +637,12 @@ struct rte_event_port_conf {
 	 * which was previously supplied to rte_event_dev_configure().
 	 * This should be set to '-1' for *open system*.
 	 */
-	uint8_t dequeue_depth;
+	uint16_t dequeue_depth;
 	/**< Configure number of bulk dequeues for this event port.
 	 * This value cannot exceed the *nb_event_port_dequeue_depth*
 	 * which previously supplied to rte_event_dev_configure()
 	 */
-	uint8_t enqueue_depth;
+	uint16_t enqueue_depth;
 	/**< Configure number of bulk enqueues for this event port.
 	 * This value cannot exceed the *nb_event_port_enqueue_depth*
 	 * which previously supplied to rte_event_dev_configure()
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3 02/17] eventdev: increase size of enq deq conf variables

[Jerin Jacob]

On Fri, Feb 17, 2017 at 02:53:57PM +0000, Harry van Haaren wrote:
> Large port enqueue sizes were not supported as the value
> it was stored in was a uint8_t. Using uint8_ts to save
> space in config apis makes no sense - increasing the 3
> instances of uint8_t enqueue / dequeue depths to more
> appropriate values (based on the context around them).
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

> ---
>  lib/librte_eventdev/rte_eventdev.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> index b0c7f9c..8b6cb7a 100644
> --- a/lib/librte_eventdev/rte_eventdev.h
> +++ b/lib/librte_eventdev/rte_eventdev.h
> @@ -426,7 +426,7 @@ struct rte_event_dev_config {
>  	 * This value cannot exceed the *max_event_queue_flows* which previously
>  	 * provided in rte_event_dev_info_get()
>  	 */
> -	uint8_t nb_event_port_dequeue_depth;
> +	uint32_t nb_event_port_dequeue_depth;
>  	/**< Maximum number of events can be dequeued at a time from an
>  	 * event port by this device.
>  	 * This value cannot exceed the *max_event_port_dequeue_depth*
> @@ -637,12 +637,12 @@ struct rte_event_port_conf {
>  	 * which was previously supplied to rte_event_dev_configure().
>  	 * This should be set to '-1' for *open system*.
>  	 */
> -	uint8_t dequeue_depth;
> +	uint16_t dequeue_depth;
>  	/**< Configure number of bulk dequeues for this event port.
>  	 * This value cannot exceed the *nb_event_port_dequeue_depth*
>  	 * which previously supplied to rte_event_dev_configure()
>  	 */
> -	uint8_t enqueue_depth;
> +	uint16_t enqueue_depth;
>  	/**< Configure number of bulk enqueues for this event port.
>  	 * This value cannot exceed the *nb_event_port_enqueue_depth*
>  	 * which previously supplied to rte_event_dev_configure()
> -- 
> 2.7.4
> 

[dpdk-dev] [PATCH v3 03/17] app/test: eventdev link all queues before start

[Harry van Haaren]

The software eventdev can lock-up if not all queues are
linked to a port. For this reason, the software evendev
fails to start if queues are not linked to anything.

This commit creates dummy links from all queues to port
0 in the eventdev setup function and start/stop test,
which would otherwise fail due to unlinked queues.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 app/test/test_eventdev.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
index 756bc32..7d4160d 100644
--- a/app/test/test_eventdev.c
+++ b/app/test/test_eventdev.c
@@ -545,6 +545,14 @@ test_eventdev_start_stop(void)
 		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
 	}
 
+	for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+		uint8_t queue = i;
+		uint8_t prio  = 0;
+		ret = rte_event_port_link(TEST_DEV_ID, 0, &queue, &prio, 1);
+		TEST_ASSERT(ret == 1, "Failed to link port, device %d",
+			    TEST_DEV_ID);
+	}
+
 	ret = rte_event_dev_start(TEST_DEV_ID);
 	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
 
@@ -571,6 +579,14 @@ eventdev_setup_device(void)
 		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
 	}
 
+	for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+		uint8_t queue = i;
+		uint8_t prio  = 0;
+		ret = rte_event_port_link(TEST_DEV_ID, 0, &queue, &prio, 1);
+		TEST_ASSERT(ret == 1, "Failed to link port, device %d",
+			    TEST_DEV_ID);
+	}
+
 	ret = rte_event_dev_start(TEST_DEV_ID);
 	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
 
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3 03/17] app/test: eventdev link all queues before start

[Jerin Jacob]

On Fri, Feb 17, 2017 at 02:53:58PM +0000, Harry van Haaren wrote:
> The software eventdev can lock-up if not all queues are
> linked to a port. For this reason, the software evendev
> fails to start if queues are not linked to anything.
> 
> This commit creates dummy links from all queues to port
> 0 in the eventdev setup function and start/stop test,
> which would otherwise fail due to unlinked queues.
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  app/test/test_eventdev.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
> index 756bc32..7d4160d 100644
> --- a/app/test/test_eventdev.c
> +++ b/app/test/test_eventdev.c
> @@ -545,6 +545,14 @@ test_eventdev_start_stop(void)
>  		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
>  	}
>  
> +	for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
> +		uint8_t queue = i;
> +		uint8_t prio  = 0;
> +		ret = rte_event_port_link(TEST_DEV_ID, 0, &queue, &prio, 1);

You can replace the for loop and pass NULL to link all the queues.
i.e rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);


> +		TEST_ASSERT(ret == 1, "Failed to link port, device %d",
> +			    TEST_DEV_ID);
> +	}
> +
>  	ret = rte_event_dev_start(TEST_DEV_ID);
>  	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
>  
> @@ -571,6 +579,14 @@ eventdev_setup_device(void)
>  		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
>  	}
>  
> +	for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
> +		uint8_t queue = i;
> +		uint8_t prio  = 0;
> +		ret = rte_event_port_link(TEST_DEV_ID, 0, &queue, &prio, 1);
> +		TEST_ASSERT(ret == 1, "Failed to link port, device %d",
> +			    TEST_DEV_ID);
> +	}
> +
>  	ret = rte_event_dev_start(TEST_DEV_ID);
>  	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
>  
> -- 
> 2.7.4
> 

[dpdk-dev] [PATCH v3 04/17] eventdev: add APIs for extended stats

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in APIs for extended stats so that eventdev implementations can report
out information on their internal state. The APIs are based on, but not
identical to, the equivalent ethdev functions.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 lib/librte_eventdev/rte_eventdev.c           |  78 ++++++++++++++++++
 lib/librte_eventdev/rte_eventdev.h           | 118 +++++++++++++++++++++++++++
 lib/librte_eventdev/rte_eventdev_pmd.h       |  70 ++++++++++++++++
 lib/librte_eventdev/rte_eventdev_version.map |   4 +
 4 files changed, 270 insertions(+)

diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
index 68bfc3b..628b94c 100644
--- a/lib/librte_eventdev/rte_eventdev.c
+++ b/lib/librte_eventdev/rte_eventdev.c
@@ -920,6 +920,84 @@ rte_event_dev_dump(uint8_t dev_id, FILE *f)
 
 }
 
+static int
+xstats_get_count(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
+		uint8_t queue_port_id)
+{
+	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+	if (dev->dev_ops->xstats_get_names != NULL)
+		return (*dev->dev_ops->xstats_get_names)(dev, mode,
+							queue_port_id, NULL, 0);
+	return 0;
+}
+
+int
+rte_event_dev_xstats_names_get(uint8_t dev_id,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		struct rte_event_dev_xstats_name *xstats_names,
+		unsigned int size)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	const int cnt_expected_entries = xstats_get_count(dev_id, mode,
+							  queue_port_id);
+	if (xstats_names == NULL || cnt_expected_entries < 0 ||
+			(int)size < cnt_expected_entries)
+		return cnt_expected_entries;
+
+	/* dev_id checked above */
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+	if (dev->dev_ops->xstats_get_names != NULL)
+		return (*dev->dev_ops->xstats_get_names)(dev, mode,
+				queue_port_id, xstats_names, size);
+
+	return -ENOTSUP;
+}
+
+/* retrieve eventdev extended statistics */
+int
+rte_event_dev_xstats_get(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
+		uint8_t queue_port_id, const unsigned int ids[],
+		uint64_t values[], unsigned int n)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+	/* implemented by the driver */
+	if (dev->dev_ops->xstats_get != NULL)
+		return (*dev->dev_ops->xstats_get)(dev, mode, queue_port_id,
+				ids, values, n);
+	return -ENOTSUP;
+}
+
+uint64_t
+rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+		unsigned int *id)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, 0);
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+	unsigned int temp = -1;
+
+	if (id != NULL)
+		*id = (unsigned int)-1;
+	else
+		id = &temp; /* ensure driver never gets a NULL value */
+
+	/* implemented by driver */
+	if (dev->dev_ops->xstats_get_by_name != NULL)
+		return (*dev->dev_ops->xstats_get_by_name)(dev, name, id);
+	return -ENOTSUP;
+}
+
+int rte_event_dev_xstats_reset(uint8_t dev_id)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+	if (dev->dev_ops->xstats_reset != NULL)
+		return (*dev->dev_ops->xstats_reset)(dev);
+	return -ENOTSUP;
+}
+
 int
 rte_event_dev_start(uint8_t dev_id)
 {
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index 8b6cb7a..242b259 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -1405,6 +1405,124 @@ rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
 int
 rte_event_dev_dump(uint8_t dev_id, FILE *f);
 
+/** Maximum name length for extended statistics counters */
+#define RTE_EVENT_DEV_XSTATS_NAME_SIZE 64
+
+/**
+ * Selects the component of the eventdev to retrieve statistics from.
+ */
+enum rte_event_dev_xstats_mode {
+	RTE_EVENT_DEV_XSTATS_DEVICE,
+	RTE_EVENT_DEV_XSTATS_PORT,
+	RTE_EVENT_DEV_XSTATS_QUEUE,
+};
+
+/**
+ * A name-key lookup element for extended statistics.
+ *
+ * This structure is used to map between names and ID numbers
+ * for extended ethdev statistics.
+ */
+struct rte_event_dev_xstats_name {
+	char name[RTE_EVENT_DEV_XSTATS_NAME_SIZE];
+};
+
+/**
+ * Retrieve names of extended statistics of an event device.
+ *
+ * @param dev_id
+ *   The identifier of the event device.
+ * @param mode
+ *   The mode of statistics to retrieve. Choices include the device statistics,
+ *   port statistics or queue statistics.
+ * @param queue_port_id
+ *   Used to specify the port or queue number in queue or port mode, and is
+ *   ignored in device mode.
+ * @param[out] xstats_names
+ *   Block of memory to insert names into. Must be at least size in capacity.
+ *   If set to NULL, function returns required capacity.
+ * @param size
+ *   Capacity of xstats_names (number of names).
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   - negative value on error. -EINVAL for invalid dev id, -ENOTSUP if the
+ *     device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_names_get(uint8_t dev_id,
+			       enum rte_event_dev_xstats_mode mode,
+			       uint8_t queue_port_id,
+			       struct rte_event_dev_xstats_name *xstats_names,
+			       unsigned int size);
+
+/**
+ * Retrieve extended statistics of an event device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param mode
+ *  The mode of statistics to retrieve. Choices include the device statistics,
+ *  port statistics or queue statistics.
+ * @param queue_port_id
+ *   Used to specify the port or queue number in queue or port mode, and is
+ *   ignored in device mode.
+ * @param ids
+ *   The id numbers of the stats to get. The ids can be got from the stat
+ *   position in the stat list from rte_event_dev_get_xstats_names(), or
+ *   by using rte_eventdev_get_xstats_by_name()
+ * @param[out] values
+ *   The values for each stats request by ID.
+ * @param n
+ *   The number of stats requested
+ * @return
+ *   - positive value: number of stat entries filled into the values array
+ *   - negative value on error. -EINVAL for invalid dev id, -ENOTSUP if the
+ *     device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_get(uint8_t dev_id,
+			 enum rte_event_dev_xstats_mode mode,
+			 uint8_t queue_port_id,
+			 const unsigned int ids[],
+			 uint64_t values[], unsigned int n);
+
+/**
+ * Retrieve the value of a single stat by requesting it by name.
+ *
+ * @param dev_id
+ *   The identifier of the device
+ * @param name
+ *   The stat name to retrieve
+ * @param[out] id
+ *   If non-NULL, the numerical id of the stat will be returned, so that further
+ *   requests for the stat can be got using rte_eventdev_xstats_get, which will
+ *   be faster as it doesn't need to scan a list of names for the stat.
+ *   If the stat cannot be found, the id returned will be (unsigned)-1.
+ * @return
+ *   - positive value or zero: the stat value
+ *   - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
+ */
+uint64_t
+rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+				 unsigned int *id);
+
+/**
+ * Reset the values of the xstats on the whole device.
+ *
+ * @param dev_id
+ *   The identifier of the device
+ * @return
+ *   - zero: successfully reset the statistics to zero
+ *   - negative value: -EINVAL invalid dev_id, -ENOTSUP if not supported.
+ */
+int
+rte_event_dev_xstats_reset(uint8_t dev_id);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
index 828dfce..e380b43 100644
--- a/lib/librte_eventdev/rte_eventdev_pmd.h
+++ b/lib/librte_eventdev/rte_eventdev_pmd.h
@@ -421,6 +421,67 @@ typedef void (*eventdev_dequeue_timeout_ticks_t)(struct rte_eventdev *dev,
  */
 typedef void (*eventdev_dump_t)(struct rte_eventdev *dev, FILE *f);
 
+/**
+ * Retrieve a set of statistics from device
+ *
+ * @param dev
+ *   Event device pointer
+ * @param ids
+ *   The stat ids to retrieve
+ * @param values
+ *   The returned stat values
+ * @param n
+ *   The number of id values and entries in the values array
+ * @return
+ *   The number of stat values successfully filled into the values array
+ */
+typedef int (*eventdev_xstats_get_t)(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		const unsigned int ids[], uint64_t values[], unsigned int n);
+
+/**
+ * Resets the statistic values in xstats for the device
+ */
+typedef int (*eventdev_xstats_reset_t)(struct rte_eventdev *dev);
+
+/**
+ * Get names of extended stats of an event device
+ *
+ * @param dev
+ *   Event device pointer
+ * @param xstats_names
+ *   Array of name values to be filled in
+ * @param size
+ *   Number of values in the xstats_names array
+ * @return
+ *   When size >= the number of stats, return the number of stat values filled
+ *   into the array.
+ *   When size < the number of available stats, return the number of stats
+ *   values, and do not fill in any data into xstats_names.
+ */
+typedef int (*eventdev_xstats_get_names_t)(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		struct rte_event_dev_xstats_name *xstats_names,
+		unsigned int size);
+
+/**
+ * Get value of one stats and optionally return its id
+ *
+ * @param dev
+ *   Event device pointer
+ * @param name
+ *   The name of the stat to retrieve
+ * @param id
+ *   Pointer to an unsigned int where we store the stat-id for future reference.
+ *   This pointer may be null if the id is not required.
+ * @return
+ *   The value of the stat, or (uint64_t)-1 if the stat is not found.
+ *   If the stat is not found, the id value will be returned as (unsigned)-1,
+ *   if id pointer is non-NULL
+ */
+typedef uint64_t (*eventdev_xstats_get_by_name)(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id);
+
 /** Event device operations function pointer table */
 struct rte_eventdev_ops {
 	eventdev_info_get_t dev_infos_get;	/**< Get device info. */
@@ -451,6 +512,15 @@ struct rte_eventdev_ops {
 	/**< Converts ns to *timeout_ticks* value for rte_event_dequeue() */
 	eventdev_dump_t dump;
 	/* Dump internal information */
+
+	eventdev_xstats_get_t xstats_get;
+	/**< Get extended device statistics. */
+	eventdev_xstats_get_names_t xstats_get_names;
+	/**< Get names of extended stats. */
+	eventdev_xstats_get_by_name xstats_get_by_name;
+	/**< Get one value by name. */
+	eventdev_xstats_reset_t xstats_reset;
+	/**< Reset the statistics values in xstats. */
 };
 
 /**
diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/rte_eventdev_version.map
index 7a6921c..1fa6b33 100644
--- a/lib/librte_eventdev/rte_eventdev_version.map
+++ b/lib/librte_eventdev/rte_eventdev_version.map
@@ -12,6 +12,10 @@ DPDK_17.05 {
 	rte_event_dev_stop;
 	rte_event_dev_close;
 	rte_event_dev_dump;
+	rte_event_dev_xstats_by_name_get;
+	rte_event_dev_xstats_get;
+	rte_event_dev_xstats_names_get;
+	rte_event_dev_xstats_reset;
 
 	rte_event_port_default_conf_get;
 	rte_event_port_setup;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3 04/17] eventdev: add APIs for extended stats

[Jerin Jacob]

On Fri, Feb 17, 2017 at 02:53:59PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add in APIs for extended stats so that eventdev implementations can report
> out information on their internal state. The APIs are based on, but not
> identical to, the equivalent ethdev functions.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  lib/librte_eventdev/rte_eventdev.c           |  78 ++++++++++++++++++
>  lib/librte_eventdev/rte_eventdev.h           | 118 +++++++++++++++++++++++++++
>  lib/librte_eventdev/rte_eventdev_pmd.h       |  70 ++++++++++++++++
>  lib/librte_eventdev/rte_eventdev_version.map |   4 +
>  4 files changed, 270 insertions(+)
> +
> +/**
> + * Retrieve the value of a single stat by requesting it by name.
> + *
> + * @param dev_id
> + *   The identifier of the device
> + * @param name
> + *   The stat name to retrieve
> + * @param[out] id
> + *   If non-NULL, the numerical id of the stat will be returned, so that further
> + *   requests for the stat can be got using rte_eventdev_xstats_get, which will
> + *   be faster as it doesn't need to scan a list of names for the stat.
> + *   If the stat cannot be found, the id returned will be (unsigned)-1.
> + * @return
> + *   - positive value or zero: the stat value
> + *   - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
> + */
> +uint64_t
> +rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
> +				 unsigned int *id);
> +
> +/**
> + * Reset the values of the xstats on the whole device.
> + *
> + * @param dev_id
> + *   The identifier of the device
> + * @return
> + *   - zero: successfully reset the statistics to zero
> + *   - negative value: -EINVAL invalid dev_id, -ENOTSUP if not supported.
> + */
> +int
> +rte_event_dev_xstats_reset(uint8_t dev_id);

I think it would be useful to selectively reset the specific counter if
needed.

something like below(Just to share my thought in C code)

int
rte_event_dev_xstats_reset(uint8_t dev_id,
	enum rte_event_dev_xstats_mode mode/* INT_MAX to specify all xstats on the whole device */
	const unsigned int ids /* UINT_MAX to specify all the ids on the specific mode */

Other than above comments, Its looks very good.

Re: [dpdk-dev] [PATCH v3 04/17] eventdev: add APIs for extended stats

[Van Haaren, Harry]

> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Sunday, February 19, 2017 12:32 PM
> To: Van Haaren, Harry <harry.van.haaren@intel.com>
> Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> Subject: Re: [PATCH v3 04/17] eventdev: add APIs for extended stats

<snip>

> > +/**
> > + * Reset the values of the xstats on the whole device.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device
> > + * @return
> > + *   - zero: successfully reset the statistics to zero
> > + *   - negative value: -EINVAL invalid dev_id, -ENOTSUP if not supported.
> > + */
> > +int
> > +rte_event_dev_xstats_reset(uint8_t dev_id);
> 
> I think it would be useful to selectively reset the specific counter if
> needed.


Ok - I like the simplicity of a single reset() covering the whole eventdev, so that the stats should be consistent. No objection to changing the API, as applications can do a full reset using the "partial" reset API if they require.


> something like below(Just to share my thought in C code)
> 
> int
> rte_event_dev_xstats_reset(uint8_t dev_id,
> 	enum rte_event_dev_xstats_mode mode/* INT_MAX to specify all xstats on the whole device */
> 	const unsigned int ids /* UINT_MAX to specify all the ids on the specific mode */

	
The other functions that take a mode require a "queue_port_id" to select the component (port number or queue id number). I'll add the parameter.

Also I don't like the INT_MAX solution, as the enum type doesn't have to be INT, it can be char or uintX_t - compiler and CFLAGS can be used to change the enum type IIRC.

The ids parameter is an array in the xstats_get() functions, allowing multiple ids to be retrieved in one call. This also allows a NULL parameter to indicate all. I think this suits better than a single int id, and UINT_MAX for all.


TL;DR: I'm suggesting

int
rte_event_dev_xstats_reset(uint8_t dev_id,
        enum rte_event_dev_xstats_mode mode,   /* device, port or queue */
        int16_t queue_port_id,                 /* Queue or Port to reset. -1 resets all of *mode* ports or queues. */
        const uint32_t ids[]);                 /* NULL array indicates to reset all stats */

Thoughts?


> Other than above comments, Its looks very good.

Thanks for review!

Re: [dpdk-dev] [PATCH v3 04/17] eventdev: add APIs for extended stats

[Jerin Jacob]

On Mon, Feb 20, 2017 at 12:12:35PM +0000, Van Haaren, Harry wrote:
> > -----Original Message-----
> > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > Sent: Sunday, February 19, 2017 12:32 PM
> > To: Van Haaren, Harry <harry.van.haaren@intel.com>
> > Cc: dev@dpdk.org; Richardson, Bruce <bruce.richardson@intel.com>
> > Subject: Re: [PATCH v3 04/17] eventdev: add APIs for extended stats
> 
> <snip>
> 
> > > +/**
> > > + * Reset the values of the xstats on the whole device.
> > > + *
> > > + * @param dev_id
> > > + *   The identifier of the device
> > > + * @return
> > > + *   - zero: successfully reset the statistics to zero
> > > + *   - negative value: -EINVAL invalid dev_id, -ENOTSUP if not supported.
> > > + */
> > > +int
> > > +rte_event_dev_xstats_reset(uint8_t dev_id);
> > 
> > I think it would be useful to selectively reset the specific counter if
> > needed.
> 
> 
> Ok - I like the simplicity of a single reset() covering the whole eventdev, so that the stats should be consistent. No objection to changing the API, as applications can do a full reset using the "partial" reset API if they require.
> 
> 
> > something like below(Just to share my thought in C code)
> > 
> > int
> > rte_event_dev_xstats_reset(uint8_t dev_id,
> > 	enum rte_event_dev_xstats_mode mode/* INT_MAX to specify all xstats on the whole device */
> > 	const unsigned int ids /* UINT_MAX to specify all the ids on the specific mode */
> 
> 	
> The other functions that take a mode require a "queue_port_id" to select the component (port number or queue id number). I'll add the parameter.
> 
> Also I don't like the INT_MAX solution, as the enum type doesn't have to be INT, it can be char or uintX_t - compiler and CFLAGS can be used to change the enum type IIRC.
> 
> The ids parameter is an array in the xstats_get() functions, allowing multiple ids to be retrieved in one call. This also allows a NULL parameter to indicate all. I think this suits better than a single int id, and UINT_MAX for all.
> 
> 
> TL;DR: I'm suggesting
> 
> int
> rte_event_dev_xstats_reset(uint8_t dev_id,
>         enum rte_event_dev_xstats_mode mode,   /* device, port or queue */
>         int16_t queue_port_id,                 /* Queue or Port to reset. -1 resets all of *mode* ports or queues. */
>         const uint32_t ids[]);                 /* NULL array indicates to reset all stats */
> 
> Thoughts?


looks good to me.

> 
> 
> > Other than above comments, Its looks very good.
> 
> Thanks for review!

[dpdk-dev] [PATCH v3 05/17] event/sw: add new software-only eventdev driver

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

This adds the minimal changes to allow a SW eventdev implementation to
be compiled, linked and created at run time. The eventdev does nothing,
but can be created via vdev on commandline, e.g.

  sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
  ...
  PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
  RTE>>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 config/common_base                            |   5 +
 drivers/event/Makefile                        |   1 +
 drivers/event/sw/Makefile                     |  66 ++++++++++
 drivers/event/sw/rte_pmd_evdev_sw_version.map |   3 +
 drivers/event/sw/sw_evdev.c                   | 177 ++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.h                   | 148 +++++++++++++++++++++
 mk/rte.app.mk                                 |   1 +
 7 files changed, 401 insertions(+)
 create mode 100644 drivers/event/sw/Makefile
 create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
 create mode 100644 drivers/event/sw/sw_evdev.c
 create mode 100644 drivers/event/sw/sw_evdev.h

diff --git a/config/common_base b/config/common_base
index 2538f4a..1121e56 100644
--- a/config/common_base
+++ b/config/common_base
@@ -458,6 +458,11 @@ CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
 
 #
+# Compile PMD for software event device
+#
+CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
+
+#
 # Compile librte_ring
 #
 CONFIG_RTE_LIBRTE_RING=y
diff --git a/drivers/event/Makefile b/drivers/event/Makefile
index 678279f..353441c 100644
--- a/drivers/event/Makefile
+++ b/drivers/event/Makefile
@@ -32,5 +32,6 @@
 include $(RTE_SDK)/mk/rte.vars.mk
 
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += skeleton
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw
 
 include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
new file mode 100644
index 0000000..d6836e3
--- /dev/null
+++ b/drivers/event/sw/Makefile
@@ -0,0 +1,66 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+
+# library name
+LIB = librte_pmd_sw_event.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+# for older GCC versions, allow us to initialize an event using
+# designated initializers.
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+ifeq ($(shell test $(GCC_VERSION) -le 50 && echo 1), 1)
+CFLAGS += -Wno-missing-field-initializers
+endif
+endif
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_evdev_sw_version.map
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
+
+# export include files
+SYMLINK-y-include +=
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eventdev
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_ring
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/event/sw/rte_pmd_evdev_sw_version.map b/drivers/event/sw/rte_pmd_evdev_sw_version.map
new file mode 100644
index 0000000..5352e7e
--- /dev/null
+++ b/drivers/event/sw/rte_pmd_evdev_sw_version.map
@@ -0,0 +1,3 @@
+DPDK_17.05 {
+	local: *;
+};
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
new file mode 100644
index 0000000..4de9bc1
--- /dev/null
+++ b/drivers/event/sw/sw_evdev.c
@@ -0,0 +1,177 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_vdev.h>
+#include <rte_memzone.h>
+#include <rte_kvargs.h>
+#include <rte_ring.h>
+
+#include "sw_evdev.h"
+
+#define EVENTDEV_NAME_SW_PMD event_sw
+#define NUMA_NODE_ARG "numa_node"
+#define SCHED_QUANTA_ARG "sched_quanta"
+#define CREDIT_QUANTA_ARG "credit_quanta"
+
+static int
+assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *socket_id = opaque;
+	*socket_id = atoi(value);
+	if (*socket_id > RTE_MAX_NUMA_NODES)
+		return -1;
+	return 0;
+}
+
+static int
+set_sched_quanta(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *quanta = opaque;
+	*quanta = atoi(value);
+	if (*quanta < 0 || *quanta > 4096)
+		return -1;
+	return 0;
+}
+
+static int
+set_credit_quanta(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *credit = opaque;
+	*credit = atoi(value);
+	if (*credit < 0 || *credit > 128)
+		return -1;
+	return 0;
+}
+
+static int
+sw_probe(const char *name, const char *params)
+{
+	static const struct rte_eventdev_ops evdev_sw_ops = {
+	};
+
+	static const char *const args[] = {
+		NUMA_NODE_ARG,
+		SCHED_QUANTA_ARG,
+		CREDIT_QUANTA_ARG,
+		NULL
+	};
+	struct rte_eventdev *dev;
+	struct sw_evdev *sw;
+	int socket_id = rte_socket_id();
+	int sched_quanta  = SW_DEFAULT_SCHED_QUANTA;
+	int credit_quanta = SW_DEFAULT_CREDIT_QUANTA;
+
+	if (params != NULL && params[0] != '\0') {
+		struct rte_kvargs *kvlist = rte_kvargs_parse(params, args);
+
+		if (!kvlist) {
+			SW_LOG_INFO(
+				"Ignoring unsupported parameters when creating device '%s'\n",
+				name);
+		} else {
+			int ret = rte_kvargs_process(kvlist, NUMA_NODE_ARG,
+					assign_numa_node, &socket_id);
+			if (ret != 0) {
+				SW_LOG_ERR(
+					"%s: Error parsing numa node parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			ret = rte_kvargs_process(kvlist, SCHED_QUANTA_ARG,
+					set_sched_quanta, &sched_quanta);
+			if (ret != 0) {
+				SW_LOG_ERR(
+					"%s: Error parsing sched quanta parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			ret = rte_kvargs_process(kvlist, CREDIT_QUANTA_ARG,
+					set_credit_quanta, &credit_quanta);
+			if (ret != 0) {
+				SW_LOG_ERR(
+					"%s: Error parsing credit quanta parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			rte_kvargs_free(kvlist);
+		}
+	}
+
+	SW_LOG_INFO(
+			"Creating eventdev sw device %s, numa_node=%d, sched_quanta=%d, credit_quanta=%d\n",
+			name, socket_id, sched_quanta, credit_quanta);
+
+	dev = rte_event_pmd_vdev_init(name,
+			sizeof(struct sw_evdev), socket_id);
+	if (dev == NULL) {
+		SW_LOG_ERR("eventdev vdev init() failed");
+		return -EFAULT;
+	}
+	dev->dev_ops = &evdev_sw_ops;
+
+	sw = dev->data->dev_private;
+	sw->data = dev->data;
+
+	/* copy values passed from vdev command line to instance */
+	sw->credit_update_quanta = credit_quanta;
+	sw->sched_quanta = sched_quanta;
+
+	return 0;
+}
+
+static int
+sw_remove(const char *name)
+{
+	if (name == NULL)
+		return -EINVAL;
+
+	SW_LOG_INFO("Closing eventdev sw device %s\n", name);
+
+	return rte_event_pmd_vdev_uninit(name);
+}
+
+static struct rte_vdev_driver evdev_sw_pmd_drv = {
+	.probe = sw_probe,
+	.remove = sw_remove
+};
+
+RTE_PMD_REGISTER_VDEV(EVENTDEV_NAME_SW_PMD, evdev_sw_pmd_drv);
+RTE_PMD_REGISTER_PARAM_STRING(event_sw, NUMA_NODE_ARG "=<int> "
+		SCHED_QUANTA_ARG "=<int>" CREDIT_QUANTA_ARG "=<int>");
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
new file mode 100644
index 0000000..ab315d4
--- /dev/null
+++ b/drivers/event/sw/sw_evdev.h
@@ -0,0 +1,148 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SW_EVDEV_H_
+#define _SW_EVDEV_H_
+
+#include <rte_eventdev.h>
+#include <rte_eventdev_pmd.h>
+
+#define SW_DEFAULT_CREDIT_QUANTA 32
+#define SW_DEFAULT_SCHED_QUANTA 128
+#define SW_QID_NUM_FIDS 16384
+#define SW_IQS_MAX 4
+#define SW_Q_PRIORITY_MAX 255
+#define SW_PORTS_MAX 64
+#define MAX_SW_CONS_Q_DEPTH 128
+#define SW_INFLIGHT_EVENTS_TOTAL 4096
+/* allow for lots of over-provisioning */
+#define MAX_SW_PROD_Q_DEPTH 4096
+#define SW_FRAGMENTS_MAX 16
+
+#define EVENTDEV_NAME_SW_PMD event_sw
+#define SW_PMD_NAME RTE_STR(event_sw)
+
+#ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
+#define SW_LOG_INFO(fmt, args...) \
+	RTE_LOG(INFO, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
+			SW_PMD_NAME, \
+			__func__, __LINE__, ## args)
+
+#define SW_LOG_DBG(fmt, args...) \
+	RTE_LOG(DEBUG, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
+			SW_PMD_NAME, \
+			__func__, __LINE__, ## args)
+#else
+#define SW_LOG_INFO(fmt, args...)
+#define SW_LOG_DBG(fmt, args...)
+#endif
+
+#define SW_LOG_ERR(fmt, args...) \
+	RTE_LOG(ERR, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
+			SW_PMD_NAME, \
+			__func__, __LINE__, ## args)
+
+/* Records basic event stats at a given point. Used in port and qid structs */
+struct sw_point_stats {
+	uint64_t rx_pkts;
+	uint64_t rx_dropped;
+	uint64_t tx_pkts;
+};
+
+/* structure used to track what port a flow (FID) is pinned to */
+struct sw_fid_t {
+	/* which CQ this FID is currently pinned to */
+	int32_t cq;
+	/* number of packets gone to the CQ with this FID */
+	uint32_t pcount;
+};
+
+struct reorder_buffer_entry {
+	uint16_t num_fragments;		/**< Number of packet fragments */
+	uint16_t fragment_index;	/**< Points to the oldest valid frag */
+	uint8_t ready;			/**< Entry is ready to be reordered */
+	struct rte_event fragments[SW_FRAGMENTS_MAX];
+};
+
+struct sw_qid {
+	/* set when the QID has been initialized */
+	uint8_t initialized;
+	/* The type of this QID */
+	int8_t type;
+	/* Integer ID representing the queue. This is used in history lists,
+	 * to identify the stage of processing.
+	 */
+	uint32_t id;
+	struct sw_point_stats stats;
+
+	/* Internal priority rings for packets */
+	struct iq_ring *iq[SW_IQS_MAX];
+	uint32_t iq_pkt_mask; /* A mask to indicate packets in an IQ */
+	uint64_t iq_pkt_count[SW_IQS_MAX];
+
+	/* Information on what CQs are polling this IQ */
+	uint32_t cq_num_mapped_cqs;
+	uint32_t cq_next_tx; /* cq to write next (non-atomic) packet */
+	uint32_t cq_map[SW_PORTS_MAX];
+
+	/* Track flow ids for atomic load balancing */
+	struct sw_fid_t fids[SW_QID_NUM_FIDS];
+
+	/* Track packet order for reordering when needed */
+	struct reorder_buffer_entry *reorder_buffer; /*< pkts await reorder */
+	struct rte_ring *reorder_buffer_freelist; /* available reorder slots */
+	uint32_t reorder_buffer_index; /* oldest valid reorder buffer entry */
+	uint32_t window_size;          /* Used to wrap reorder_buffer_index */
+
+	uint8_t priority;
+};
+
+struct sw_evdev {
+	struct rte_eventdev_data *data;
+
+	int32_t sched_quanta;
+	uint32_t credit_update_quanta;
+};
+
+static inline struct sw_evdev *
+sw_pmd_priv(const struct rte_eventdev *eventdev)
+{
+	return eventdev->data->dev_private;
+}
+
+static inline const struct sw_evdev *
+sw_pmd_priv_const(const struct rte_eventdev *eventdev)
+{
+	return eventdev->data->dev_private;
+}
+
+#endif /* _SW_EVDEV_H_ */
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 3897e2e..c4097ee 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -154,6 +154,7 @@ endif # CONFIG_RTE_LIBRTE_CRYPTODEV
 
 ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += -lrte_pmd_skeleton_event
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += -lrte_pmd_sw_event
 endif # CONFIG_RTE_LIBRTE_EVENTDEV
 
 endif # !CONFIG_RTE_BUILD_SHARED_LIBS
-- 
2.7.4

Re: [dpdk-dev] [PATCH v3 05/17] event/sw: add new software-only eventdev driver

[Jerin Jacob]

On Fri, Feb 17, 2017 at 02:54:00PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> This adds the minimal changes to allow a SW eventdev implementation to
> be compiled, linked and created at run time. The eventdev does nothing,
> but can be created via vdev on commandline, e.g.
> 
>   sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
>   ...
>   PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
>   RTE>>
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  config/common_base                            |   5 +
>  drivers/event/Makefile                        |   1 +
>  drivers/event/sw/Makefile                     |  66 ++++++++++
>  drivers/event/sw/rte_pmd_evdev_sw_version.map |   3 +
>  drivers/event/sw/sw_evdev.c                   | 177 ++++++++++++++++++++++++++
>  drivers/event/sw/sw_evdev.h                   | 148 +++++++++++++++++++++
>  mk/rte.app.mk                                 |   1 +
>  7 files changed, 401 insertions(+)
>  create mode 100644 drivers/event/sw/Makefile
>  create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
>  create mode 100644 drivers/event/sw/sw_evdev.c
>  create mode 100644 drivers/event/sw/sw_evdev.h
> 
> diff --git a/config/common_base b/config/common_base
> index 2538f4a..1121e56 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -458,6 +458,11 @@ CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
>  CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
>  
>  #
> +# Compile PMD for software event device
> +#
> +CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y

Missing the CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n here

[dpdk-dev] [PATCH v3 06/17] event/sw: add device capabilities function

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the info_get function to return details on the queues, flow,
prioritization capabilities, etc. that this device has.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 4de9bc1..9d8517a 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,28 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
+{
+	RTE_SET_USED(dev);
+
+	static const struct rte_event_dev_info evdev_sw_info = {
+			.driver_name = SW_PMD_NAME,
+			.max_event_queues = RTE_EVENT_MAX_QUEUES_PER_DEV,
+			.max_event_queue_flows = SW_QID_NUM_FIDS,
+			.max_event_queue_priority_levels = SW_Q_PRIORITY_MAX,
+			.max_event_priority_levels = SW_IQS_MAX,
+			.max_event_ports = SW_PORTS_MAX,
+			.max_event_port_dequeue_depth = MAX_SW_CONS_Q_DEPTH,
+			.max_event_port_enqueue_depth = MAX_SW_PROD_Q_DEPTH,
+			.max_num_events = SW_INFLIGHT_EVENTS_TOTAL,
+			.event_dev_cap = (RTE_EVENT_DEV_CAP_QUEUE_QOS |
+					RTE_EVENT_DEV_CAP_EVENT_QOS),
+	};
+
+	*info = evdev_sw_info;
+}
+
 static int
 assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
 {
@@ -78,6 +100,7 @@ static int
 sw_probe(const char *name, const char *params)
 {
 	static const struct rte_eventdev_ops evdev_sw_ops = {
+			.dev_infos_get = sw_info_get,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

[dpdk-dev] [PATCH v3 07/17] event/sw: add configure function

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 15 +++++++++++++++
 drivers/event/sw/sw_evdev.h | 11 +++++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 9d8517a..28a2326 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,20 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static int
+sw_dev_configure(const struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	const struct rte_eventdev_data *data = dev->data;
+	const struct rte_event_dev_config *conf = &data->dev_conf;
+
+	sw->qid_count = conf->nb_event_queues;
+	sw->port_count = conf->nb_event_ports;
+	sw->nb_events_limit = conf->nb_events_limit;
+
+	return 0;
+}
+
 static void
 sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 {
@@ -100,6 +114,7 @@ static int
 sw_probe(const char *name, const char *params)
 {
 	static const struct rte_eventdev_ops evdev_sw_ops = {
+			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
 	};
 
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index ab315d4..fda57df 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -35,6 +35,7 @@
 
 #include <rte_eventdev.h>
 #include <rte_eventdev_pmd.h>
+#include <rte_atomic.h>
 
 #define SW_DEFAULT_CREDIT_QUANTA 32
 #define SW_DEFAULT_SCHED_QUANTA 128
@@ -129,7 +130,17 @@ struct sw_qid {
 struct sw_evdev {
 	struct rte_eventdev_data *data;
 
+	uint32_t port_count;
+	uint32_t qid_count;
+
+	/*
+	 * max events in this instance. Cached here for performance.
+	 * (also available in data->conf.nb_events_limit)
+	 */
+	uint32_t nb_events_limit;
+
 	int32_t sched_quanta;
+
 	uint32_t credit_update_quanta;
 };
 
-- 
2.7.4

[dpdk-dev] [PATCH v3 08/17] event/sw: add fns to return default port/queue config

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 drivers/event/sw/sw_evdev.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 28a2326..d1fa3a7 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,35 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_queue_def_conf(struct rte_eventdev *dev, uint8_t queue_id,
+				 struct rte_event_queue_conf *conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(queue_id);
+
+	static const struct rte_event_queue_conf default_conf = {
+		.nb_atomic_flows = 4096,
+		.nb_atomic_order_sequences = 1,
+		.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+		.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+	};
+
+	*conf = default_conf;
+}
+
+static void
+sw_port_def_conf(struct rte_eventdev *dev, uint8_t port_id,
+		 struct rte_event_port_conf *port_conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(port_id);
+
+	port_conf->new_event_threshold = 1024;
+	port_conf->dequeue_depth = 16;
+	port_conf->enqueue_depth = 16;
+}
+
 static int
 sw_dev_configure(const struct rte_eventdev *dev)
 {
@@ -116,6 +145,9 @@ sw_probe(const char *name, const char *params)
 	static const struct rte_eventdev_ops evdev_sw_ops = {
 			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
+
+			.queue_def_conf = sw_queue_def_conf,
+			.port_def_conf = sw_port_def_conf,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

[dpdk-dev] [PATCH v3 09/17] event/sw: add support for event queues

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the data structures for the event queues, and the eventdev
functions to create and destroy those queues.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/iq_ring.h  | 176 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.c | 160 ++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.h |   5 ++
 3 files changed, 341 insertions(+)
 create mode 100644 drivers/event/sw/iq_ring.h

diff --git a/drivers/event/sw/iq_ring.h b/drivers/event/sw/iq_ring.h
new file mode 100644
index 0000000..d480d15
--- /dev/null
+++ b/drivers/event/sw/iq_ring.h
@@ -0,0 +1,176 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Ring structure definitions used for the internal ring buffers of the
+ * SW eventdev implementation. These are designed for single-core use only.
+ */
+#ifndef _IQ_RING_
+#define _IQ_RING_
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_eventdev.h>
+
+#define IQ_RING_NAMESIZE 12
+#define QID_IQ_DEPTH 512
+#define QID_IQ_MASK (uint16_t)(QID_IQ_DEPTH - 1)
+
+struct iq_ring {
+	char name[IQ_RING_NAMESIZE] __rte_cache_aligned;
+	uint16_t write_idx;
+	uint16_t read_idx;
+
+	struct rte_event ring[QID_IQ_DEPTH];
+};
+
+#ifndef force_inline
+#define force_inline inline __attribute__((always_inline))
+#endif
+
+static inline struct iq_ring *
+iq_ring_create(const char *name, unsigned int socket_id)
+{
+	struct iq_ring *retval;
+
+	retval = rte_malloc_socket(NULL, sizeof(*retval), 0, socket_id);
+	if (retval == NULL)
+		goto end;
+
+	snprintf(retval->name, sizeof(retval->name), "%s", name);
+	retval->write_idx = retval->read_idx = 0;
+end:
+	return retval;
+}
+
+static inline void
+iq_ring_destroy(struct iq_ring *r)
+{
+	rte_free(r);
+}
+
+static force_inline uint16_t
+iq_ring_count(const struct iq_ring *r)
+{
+	return r->write_idx - r->read_idx;
+}
+
+static force_inline uint16_t
+iq_ring_free_count(const struct iq_ring *r)
+{
+	return QID_IQ_MASK - iq_ring_count(r);
+}
+
+static force_inline uint16_t
+iq_ring_enqueue_burst(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	const uint16_t read = r->read_idx;
+	uint16_t write = r->write_idx;
+	const uint16_t space = read + QID_IQ_MASK - write;
+	uint16_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++)
+		r->ring[write & QID_IQ_MASK] = qes[i];
+
+	r->write_idx = write;
+
+	return nb_qes;
+}
+
+static force_inline uint16_t
+iq_ring_dequeue_burst(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	uint16_t read = r->read_idx;
+	const uint16_t write = r->write_idx;
+	const uint16_t items = write - read;
+	uint16_t i;
+
+	for (i = 0; i < nb_qes; i++, read++)
+		qes[i] = r->ring[read & QID_IQ_MASK];
+
+	if (items < nb_qes)
+		nb_qes = items;
+
+	r->read_idx += nb_qes;
+
+	return nb_qes;
+}
+
+/* assumes there is space, from a previous dequeue_burst */
+static force_inline uint16_t
+iq_ring_put_back(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	uint16_t i, read = r->read_idx;
+
+	for (i = nb_qes; i-- > 0; )
+		r->ring[--read & QID_IQ_MASK] = qes[i];
+
+	r->read_idx = read;
+	return nb_qes;
+}
+
+static force_inline const struct rte_event *
+iq_ring_peek(const struct iq_ring *r)
+{
+	return &r->ring[r->read_idx & QID_IQ_MASK];
+}
+
+static force_inline void
+iq_ring_pop(struct iq_ring *r)
+{
+	r->read_idx++;
+}
+
+static force_inline int
+iq_ring_enqueue(struct iq_ring *r, const struct rte_event *qe)
+{
+	const uint16_t read = r->read_idx;
+	const uint16_t write = r->write_idx;
+	const uint16_t space = read + QID_IQ_MASK - write;
+
+	if (space == 0)
+		return -1;
+
+	r->ring[write & QID_IQ_MASK] = *qe;
+
+	r->write_idx = write + 1;
+
+	return 0;
+}
+
+#endif
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index d1fa3a7..b793075 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -38,12 +38,170 @@
 #include <rte_ring.h>
 
 #include "sw_evdev.h"
+#include "iq_ring.h"
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define NUMA_NODE_ARG "numa_node"
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static int32_t
+qid_init(struct sw_evdev *sw, unsigned int idx, int type,
+		const struct rte_event_queue_conf *queue_conf)
+{
+	unsigned int i;
+	int dev_id = sw->data->dev_id;
+	int socket_id = sw->data->socket_id;
+	char buf[IQ_RING_NAMESIZE];
+	struct sw_qid *qid = &sw->qids[idx];
+
+	for (i = 0; i < SW_IQS_MAX; i++) {
+		snprintf(buf, sizeof(buf), "q_%u_iq_%d", idx, i);
+		qid->iq[i] = iq_ring_create(buf, socket_id);
+		if (!qid->iq[i]) {
+			SW_LOG_DBG("ring create failed");
+			goto cleanup;
+		}
+	}
+
+	/* Initialize the FID structures to no pinning (-1), and zero packets */
+	const struct sw_fid_t fid = {.cq = -1, .pcount = 0};
+	for (i = 0; i < RTE_DIM(qid->fids); i++)
+		qid->fids[i] = fid;
+
+	qid->id = idx;
+	qid->type = type;
+	qid->priority = queue_conf->priority;
+
+	if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+		char ring_name[RTE_RING_NAMESIZE];
+		uint32_t window_size;
+
+		/* rte_ring and window_size_mask require require window_size to
+		 * be a power-of-2.
+		 */
+		window_size = rte_align32pow2(
+				queue_conf->nb_atomic_order_sequences);
+
+		qid->window_size = window_size - 1;
+
+		if (!window_size) {
+			SW_LOG_DBG(
+				"invalid reorder_window_size for ordered queue\n"
+				);
+			goto cleanup;
+		}
+
+		snprintf(buf, sizeof(buf), "sw%d_iq_%d_rob", dev_id, i);
+		qid->reorder_buffer = rte_zmalloc_socket(buf,
+				window_size * sizeof(qid->reorder_buffer[0]),
+				0, socket_id);
+		if (!qid->reorder_buffer) {
+			SW_LOG_DBG("reorder_buffer malloc failed\n");
+			goto cleanup;
+		}
+
+		memset(&qid->reorder_buffer[0],
+		       0,
+		       window_size * sizeof(qid->reorder_buffer[0]));
+
+		snprintf(ring_name, sizeof(ring_name), "sw%d_q%d_freelist",
+				dev_id, idx);
+		qid->reorder_buffer_freelist = rte_ring_create(ring_name,
+				window_size,
+				socket_id,
+				RING_F_SP_ENQ | RING_F_SC_DEQ);
+		if (!qid->reorder_buffer_freelist) {
+			SW_LOG_DBG("freelist ring create failed");
+			goto cleanup;
+		}
+
+		/* Populate the freelist with reorder buffer entries. Enqueue
+		 * 'window_size - 1' entries because the rte_ring holds only
+		 * that many.
+		 */
+		for (i = 0; i < window_size - 1; i++) {
+			if (rte_ring_sp_enqueue(qid->reorder_buffer_freelist,
+						&qid->reorder_buffer[i]) < 0)
+				goto cleanup;
+		}
+
+		qid->reorder_buffer_index = 0;
+		qid->cq_next_tx = 0;
+	}
+
+	qid->initialized = 1;
+
+	return 0;
+
+cleanup:
+	for (i = 0; i < SW_IQS_MAX; i++) {
+		if (qid->iq[i])
+			iq_ring_destroy(qid->iq[i]);
+	}
+
+	if (qid->reorder_buffer) {
+		rte_free(qid->reorder_buffer);
+		qid->reorder_buffer = NULL;
+	}
+
+	if (qid->reorder_buffer_freelist) {
+		rte_ring_free(qid->reorder_buffer_freelist);
+		qid->reorder_buffer_freelist = NULL;
+	}
+
+	return -EINVAL;
+}
+
+static int
+sw_queue_setup(struct rte_eventdev *dev, uint8_t queue_id,
+		const struct rte_event_queue_conf *conf)
+{
+	int type;
+
+	/* TODO: Error check queue types and appropriate values */
+	switch (conf->event_queue_cfg) {
+	case RTE_EVENT_QUEUE_CFG_SINGLE_LINK:
+		type = SW_SCHED_TYPE_DIRECT;
+		break;
+	case RTE_EVENT_QUEUE_CFG_DEFAULT:
+		/* fallthrough */
+	case RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY:
+		type = RTE_SCHED_TYPE_ATOMIC;
+		break;
+	case RTE_EVENT_QUEUE_CFG_ORDERED_ONLY:
+		type = RTE_SCHED_TYPE_ORDERED;
+		break;
+	case RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY:
+		type = RTE_SCHED_TYPE_PARALLEL;
+		break;
+	default:
+		printf("%s : unknown queue type %d requested\n", __func__,
+				conf->event_queue_cfg);
+		return -1;
+	}
+
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	return qid_init(sw, queue_id, type, conf);
+}
+
+static void
+sw_queue_release(struct rte_eventdev *dev, uint8_t id)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	struct sw_qid *qid = &sw->qids[id];
+	uint32_t i;
+
+	for (i = 0; i < SW_IQS_MAX; i++)
+		iq_ring_destroy(qid->iq[i]);
+
+	if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+		rte_free(qid->reorder_buffer);
+		rte_ring_free(qid->reorder_buffer_freelist);
+	}
+	memset(qid, 0, sizeof(*qid));
+}
+
 static void
 sw_queue_def_conf(struct rte_eventdev *dev, uint8_t queue_id,
 				 struct rte_event_queue_conf *conf)
@@ -147,6 +305,8 @@ sw_probe(const char *name, const char *params)
 			.dev_infos_get = sw_info_get,
 
 			.queue_def_conf = sw_queue_def_conf,
+			.queue_setup = sw_queue_setup,
+			.queue_release = sw_queue_release,
 			.port_def_conf = sw_port_def_conf,
 	};
 
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index fda57df..ddf0cd2 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -52,6 +52,8 @@
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define SW_PMD_NAME RTE_STR(event_sw)
 
+#define SW_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
+
 #ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
 #define SW_LOG_INFO(fmt, args...) \
 	RTE_LOG(INFO, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
@@ -139,6 +141,9 @@ struct sw_evdev {
 	 */
 	uint32_t nb_events_limit;
 
+	/* Internal queues - one per logical queue */
+	struct sw_qid qids[RTE_EVENT_MAX_QUEUES_PER_DEV] __rte_cache_aligned;
+
 	int32_t sched_quanta;
 
 	uint32_t credit_update_quanta;
-- 
2.7.4

[dpdk-dev] [PATCH v3 10/17] event/sw: add support for event ports

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the data-structures for the ports used by workers to send
packets to/from the scheduler. Also add in the functions to
create/destroy those ports.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/event_ring.h | 185 ++++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.c   |  76 +++++++++++++++++
 drivers/event/sw/sw_evdev.h   |  78 ++++++++++++++++++
 3 files changed, 339 insertions(+)
 create mode 100644 drivers/event/sw/event_ring.h

diff --git a/drivers/event/sw/event_ring.h b/drivers/event/sw/event_ring.h
new file mode 100644
index 0000000..cdaee95
--- /dev/null
+++ b/drivers/event/sw/event_ring.h
@@ -0,0 +1,185 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Generic ring structure for passing events from one core to another.
+ *
+ * Used by the software scheduler for the producer and consumer rings for
+ * each port, i.e. for passing events from worker cores to scheduler and
+ * vice-versa. Designed for single-producer, single-consumer use with two
+ * cores working on each ring.
+ */
+
+#ifndef _EVENT_RING_
+#define _EVENT_RING_
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+
+#define QE_RING_NAMESIZE 32
+
+struct qe_ring {
+	char name[QE_RING_NAMESIZE] __rte_cache_aligned;
+	uint32_t ring_size; /* size of memory block allocated to the ring */
+	uint32_t mask;      /* mask for read/write values == ring_size -1 */
+	uint32_t size;      /* actual usable space in the ring */
+	volatile uint32_t write_idx __rte_cache_aligned;
+	volatile uint32_t read_idx __rte_cache_aligned;
+
+	struct rte_event ring[0] __rte_cache_aligned;
+};
+
+#ifndef force_inline
+#define force_inline inline __attribute__((always_inline))
+#endif
+
+static inline struct qe_ring *
+qe_ring_create(const char *name, unsigned int size, unsigned int socket_id)
+{
+	struct qe_ring *retval;
+	const uint32_t ring_size = rte_align32pow2(size + 1);
+	size_t memsize = sizeof(*retval) +
+			(ring_size * sizeof(retval->ring[0]));
+
+	retval = rte_zmalloc_socket(NULL, memsize, 0, socket_id);
+	if (retval == NULL)
+		goto end;
+
+	snprintf(retval->name, sizeof(retval->name), "EVDEV_RG_%s", name);
+	retval->ring_size = ring_size;
+	retval->mask = ring_size - 1;
+	retval->size = size;
+end:
+	return retval;
+}
+
+static inline void
+qe_ring_destroy(struct qe_ring *r)
+{
+	rte_free(r);
+}
+
+static force_inline unsigned int
+qe_ring_count(const struct qe_ring *r)
+{
+	return r->write_idx - r->read_idx;
+}
+
+static force_inline unsigned int
+qe_ring_free_count(const struct qe_ring *r)
+{
+	return r->size - qe_ring_count(r);
+}
+
+static force_inline unsigned int
+qe_ring_enqueue_burst(struct qe_ring *r, const struct rte_event *qes,
+		unsigned int nb_qes, uint16_t *free_count)
+{
+	const uint32_t size = r->size;
+	const uint32_t mask = r->mask;
+	const uint32_t read = r->read_idx;
+	uint32_t write = r->write_idx;
+	const uint32_t space = read + size - write;
+	uint32_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++)
+		r->ring[write & mask] = qes[i];
+
+	rte_smp_wmb();
+
+	if (nb_qes != 0)
+		r->write_idx = write;
+
+	*free_count = space - nb_qes;
+
+	return nb_qes;
+}
+
+static force_inline unsigned int
+qe_ring_enqueue_burst_with_ops(struct qe_ring *r, const struct rte_event *qes,
+		unsigned int nb_qes, uint8_t *ops)
+{
+	const uint32_t size = r->size;
+	const uint32_t mask = r->mask;
+	const uint32_t read = r->read_idx;
+	uint32_t write = r->write_idx;
+	const uint32_t space = read + size - write;
+	uint32_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++) {
+		r->ring[write & mask] = qes[i];
+		r->ring[write & mask].op = ops[i];
+	}
+
+	rte_smp_wmb();
+
+	if (nb_qes != 0)
+		r->write_idx = write;
+
+	return nb_qes;
+}
+
+static force_inline unsigned int
+qe_ring_dequeue_burst(struct qe_ring *r, struct rte_event *qes,
+		unsigned int nb_qes)
+{
+	const uint32_t mask = r->mask;
+	uint32_t read = r->read_idx;
+	const uint32_t write = r->write_idx;
+	const uint32_t items = write - read;
+	uint32_t i;
+
+	if (items < nb_qes)
+		nb_qes = items;
+
+
+	for (i = 0; i < nb_qes; i++, read++)
+		qes[i] = r->ring[read & mask];
+
+	rte_smp_rmb();
+
+	if (nb_qes != 0)
+		r->read_idx += nb_qes;
+
+	return nb_qes;
+}
+
+#endif
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index b793075..37f8846 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -39,12 +39,86 @@
 
 #include "sw_evdev.h"
 #include "iq_ring.h"
+#include "event_ring.h"
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define NUMA_NODE_ARG "numa_node"
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info);
+
+static int
+sw_port_setup(struct rte_eventdev *dev, uint8_t port_id,
+		const struct rte_event_port_conf *conf)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	struct sw_port *p = &sw->ports[port_id];
+	char buf[QE_RING_NAMESIZE];
+	unsigned int i;
+
+	struct rte_event_dev_info info;
+	sw_info_get(dev, &info);
+
+	uint8_t enq_oversize =
+		conf->enqueue_depth > info.max_event_port_enqueue_depth;
+	uint8_t deq_oversize =
+		conf->dequeue_depth > info.max_event_port_dequeue_depth;
+	if (enq_oversize || deq_oversize)
+		return -EINVAL;
+
+	*p = (struct sw_port){0}; /* zero entire structure */
+	p->id = port_id;
+	p->sw = sw;
+
+	snprintf(buf, sizeof(buf), "sw%d_%s", dev->data->dev_id,
+			"rx_worker_ring");
+	p->rx_worker_ring = qe_ring_create(buf, MAX_SW_PROD_Q_DEPTH,
+			dev->data->socket_id);
+	if (p->rx_worker_ring == NULL) {
+		printf("%s %d: error creating RX worker ring\n",
+				__func__, __LINE__);
+		return -1;
+	}
+
+	p->inflight_max = conf->new_event_threshold;
+
+	snprintf(buf, sizeof(buf), "sw%d_%s", dev->data->dev_id,
+			"cq_worker_ring");
+	p->cq_worker_ring = qe_ring_create(buf, conf->dequeue_depth,
+			dev->data->socket_id);
+	if (p->cq_worker_ring == NULL) {
+		qe_ring_destroy(p->rx_worker_ring);
+		printf("%s %d: error creating CQ worker ring\n",
+				__func__, __LINE__);
+		return -1;
+	}
+	sw->cq_ring_space[port_id] = conf->dequeue_depth;
+
+	/* set hist list contents to empty */
+	for (i = 0; i < SW_PORT_HIST_LIST; i++) {
+		p->hist_list[i].fid = -1;
+		p->hist_list[i].qid = -1;
+	}
+	dev->data->ports[port_id] = p;
+	p->initialized = 1;
+
+	return 0;
+}
+
+static void
+sw_port_release(void *port)
+{
+	struct sw_port *p = (void *)port;
+	if (p == NULL)
+		return;
+
+	qe_ring_destroy(p->rx_worker_ring);
+	qe_ring_destroy(p->cq_worker_ring);
+	memset(p, 0, sizeof(*p));
+}
+
 static int32_t
 qid_init(struct sw_evdev *sw, unsigned int idx, int type,
 		const struct rte_event_queue_conf *queue_conf)
@@ -308,6 +382,8 @@ sw_probe(const char *name, const char *params)
 			.queue_setup = sw_queue_setup,
 			.queue_release = sw_queue_release,
 			.port_def_conf = sw_port_def_conf,
+			.port_setup = sw_port_setup,
+			.port_release = sw_port_release,
 	};
 
 	static const char *const args[] = {
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index ddf0cd2..1bedd63 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -49,6 +49,13 @@
 #define MAX_SW_PROD_Q_DEPTH 4096
 #define SW_FRAGMENTS_MAX 16
 
+/* report dequeue burst sizes in buckets */
+#define SW_DEQ_STAT_BUCKET_SHIFT 2
+/* how many packets pulled from port by sched */
+#define SCHED_DEQUEUE_BURST_SIZE 32
+
+#define SW_PORT_HIST_LIST (MAX_SW_PROD_Q_DEPTH) /* size of our history list */
+
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define SW_PMD_NAME RTE_STR(event_sw)
 
@@ -129,12 +136,80 @@ struct sw_qid {
 	uint8_t priority;
 };
 
+struct sw_hist_list_entry {
+	int32_t qid;
+	int32_t fid;
+	struct reorder_buffer_entry *rob_entry;
+};
+
+struct sw_evdev;
+
+struct sw_port {
+	/* new enqueue / dequeue API doesn't have an instance pointer, only the
+	 * pointer to the port being enqueue/dequeued from
+	 */
+	struct sw_evdev *sw;
+
+	/* set when the port is initialized */
+	uint8_t initialized;
+	/* A numeric ID for the port */
+	uint8_t id;
+
+	int16_t is_directed; /** Takes from a single directed QID */
+	/**
+	 * For loadbalanced we can optimise pulling packets from
+	 * producers if there is no reordering involved
+	 */
+	int16_t num_ordered_qids;
+
+	/** Ring and buffer for pulling events from workers for scheduling */
+	struct qe_ring *rx_worker_ring __rte_cache_aligned;
+	/** Ring and buffer for pushing packets to workers after scheduling */
+	struct qe_ring *cq_worker_ring;
+
+	/* hole */
+
+	/* num releases yet to be completed on this port */
+	uint16_t outstanding_releases __rte_cache_aligned;
+	uint16_t inflight_max; /* app requested max inflights for this port */
+	uint16_t inflight_credits; /* num credits this port has right now */
+
+	uint16_t last_dequeue_burst_sz; /* how big the burst was */
+	uint64_t last_dequeue_ticks; /* used to track burst processing time */
+	uint64_t avg_pkt_ticks;      /* tracks average over NUM_SAMPLES burst */
+	uint64_t total_polls;        /* how many polls were counted in stats */
+	uint64_t zero_polls;         /* tracks polls returning nothing */
+	uint32_t poll_buckets[MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT];
+		/* bucket values in 4s for shorter reporting */
+
+	/* History list structs, containing info on pkts egressed to worker */
+	uint16_t hist_head __rte_cache_aligned;
+	uint16_t hist_tail;
+	uint16_t inflights;
+	struct sw_hist_list_entry hist_list[SW_PORT_HIST_LIST];
+
+	/* track packets in and out of this port */
+	struct sw_point_stats stats;
+
+
+	uint32_t pp_buf_start;
+	uint32_t pp_buf_count;
+	uint16_t cq_buf_count;
+	struct rte_event pp_buf[SCHED_DEQUEUE_BURST_SIZE];
+	struct rte_event cq_buf[MAX_SW_CONS_Q_DEPTH];
+
+	uint8_t num_qids_mapped;
+};
+
 struct sw_evdev {
 	struct rte_eventdev_data *data;
 
 	uint32_t port_count;
 	uint32_t qid_count;
 
+	/* Contains all ports - load balanced and directed */
+	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
+
 	/*
 	 * max events in this instance. Cached here for performance.
 	 * (also available in data->conf.nb_events_limit)
@@ -144,6 +219,9 @@ struct sw_evdev {
 	/* Internal queues - one per logical queue */
 	struct sw_qid qids[RTE_EVENT_MAX_QUEUES_PER_DEV] __rte_cache_aligned;
 
+	/* Cache how many packets are in each cq */
+	uint16_t cq_ring_space[SW_PORTS_MAX] __rte_cache_aligned;
+
 	int32_t sched_quanta;
 
 	uint32_t credit_update_quanta;
-- 
2.7.4

[dpdk-dev] [PATCH v3 11/17] event/sw: add support for linking queues to ports

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 74 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 37f8846..b809d5d 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -36,6 +36,7 @@
 #include <rte_memzone.h>
 #include <rte_kvargs.h>
 #include <rte_ring.h>
+#include <rte_errno.h>
 
 #include "sw_evdev.h"
 #include "iq_ring.h"
@@ -50,6 +51,77 @@ static void
 sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info);
 
 static int
+sw_port_link(struct rte_eventdev *dev, void *port, const uint8_t queues[],
+		const uint8_t priorities[], uint16_t num)
+{
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	int i;
+
+	RTE_SET_USED(priorities);
+	for (i = 0; i < num; i++) {
+		struct sw_qid *q = &sw->qids[queues[i]];
+
+		/* check for qid map overflow */
+		if (q->cq_num_mapped_cqs >= RTE_DIM(q->cq_map))
+			break;
+
+		if (p->is_directed && p->num_qids_mapped > 0)
+			break;
+
+		if (q->type == SW_SCHED_TYPE_DIRECT) {
+			/* check directed qids only map to one port */
+			if (p->num_qids_mapped > 0) {
+				rte_errno = -EDQUOT;
+				break;
+			}
+			/* check port only takes a directed flow */
+			if (num > 1) {
+				rte_errno = -EDQUOT;
+				break;
+			}
+
+			p->is_directed = 1;
+			p->num_qids_mapped = 1;
+		} else if (q->type == RTE_SCHED_TYPE_ORDERED) {
+			p->num_ordered_qids++;
+			p->num_qids_mapped++;
+		} else if (q->type == RTE_SCHED_TYPE_ATOMIC) {
+			p->num_qids_mapped++;
+		}
+
+		q->cq_map[q->cq_num_mapped_cqs] = p->id;
+		rte_smp_wmb();
+		q->cq_num_mapped_cqs++;
+	}
+	return i;
+}
+
+static int
+sw_port_unlink(struct rte_eventdev *dev, void *port, uint8_t queues[],
+		uint16_t nb_unlinks)
+{
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	unsigned int i, j;
+
+	int unlinked = 0;
+	for (i = 0; i < nb_unlinks; i++) {
+		struct sw_qid *q = &sw->qids[queues[i]];
+		for (j = 0; j < q->cq_num_mapped_cqs; j++)
+			if (q->cq_map[j] == p->id) {
+				q->cq_map[j] =
+					q->cq_map[q->cq_num_mapped_cqs - 1];
+				rte_smp_wmb();
+				q->cq_num_mapped_cqs--;
+				unlinked++;
+				continue;
+			}
+	}
+	return unlinked;
+}
+
+static int
 sw_port_setup(struct rte_eventdev *dev, uint8_t port_id,
 		const struct rte_event_port_conf *conf)
 {
@@ -384,6 +456,8 @@ sw_probe(const char *name, const char *params)
 			.port_def_conf = sw_port_def_conf,
 			.port_setup = sw_port_setup,
 			.port_release = sw_port_release,
+			.port_link = sw_port_link,
+			.port_unlink = sw_port_unlink,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

[dpdk-dev] [PATCH v3 12/17] event/sw: add worker core functions

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

add the event enqueue, dequeue and release functions to the eventdev.
These also include tracking of stats for observability in the load of
the scheduler.
Internally in the enqueue function, the various types of enqueue
operations, to forward an existing event, to send a new event, to
drop a previous event, are converted to a series of flags which will
be used by the scheduler code to perform the needed actions for that
event.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile          |   1 +
 drivers/event/sw/sw_evdev.c        |   5 +
 drivers/event/sw/sw_evdev.h        |  34 +++++++
 drivers/event/sw/sw_evdev_worker.c | 188 +++++++++++++++++++++++++++++++++++++
 4 files changed, 228 insertions(+)
 create mode 100644 drivers/event/sw/sw_evdev_worker.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index d6836e3..b6ecd91 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -53,6 +53,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index b809d5d..adff729 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -387,6 +387,7 @@ sw_dev_configure(const struct rte_eventdev *dev)
 	sw->qid_count = conf->nb_event_queues;
 	sw->port_count = conf->nb_event_ports;
 	sw->nb_events_limit = conf->nb_events_limit;
+	rte_atomic32_set(&sw->inflights, 0);
 
 	return 0;
 }
@@ -525,6 +526,10 @@ sw_probe(const char *name, const char *params)
 		return -EFAULT;
 	}
 	dev->dev_ops = &evdev_sw_ops;
+	dev->enqueue = sw_event_enqueue;
+	dev->enqueue_burst = sw_event_enqueue_burst;
+	dev->dequeue = sw_event_dequeue;
+	dev->dequeue_burst = sw_event_dequeue_burst;
 
 	sw = dev->data->dev_private;
 	sw->data = dev->data;
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 1bedd63..ab372fd 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -55,12 +55,36 @@
 #define SCHED_DEQUEUE_BURST_SIZE 32
 
 #define SW_PORT_HIST_LIST (MAX_SW_PROD_Q_DEPTH) /* size of our history list */
+#define NUM_SAMPLES 64 /* how many data points use for average stats */
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define SW_PMD_NAME RTE_STR(event_sw)
 
 #define SW_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
 
+enum {
+	QE_FLAG_VALID_SHIFT = 0,
+	QE_FLAG_COMPLETE_SHIFT,
+	QE_FLAG_NOT_EOP_SHIFT,
+	_QE_FLAG_COUNT
+};
+
+#define QE_FLAG_VALID    (1 << QE_FLAG_VALID_SHIFT)    /* for NEW FWD, FRAG */
+#define QE_FLAG_COMPLETE (1 << QE_FLAG_COMPLETE_SHIFT) /* set for FWD, DROP  */
+#define QE_FLAG_NOT_EOP  (1 << QE_FLAG_NOT_EOP_SHIFT)  /* set for FRAG only  */
+
+static const uint8_t sw_qe_flag_map[] = {
+		QE_FLAG_VALID /* NEW Event */,
+		QE_FLAG_VALID | QE_FLAG_COMPLETE /* FWD Event */,
+		QE_FLAG_COMPLETE /* RELEASE Event */,
+
+		/* Values which can be used for future support for partial
+		 * events, i.e. where one event comes back to the scheduler
+		 * as multiple which need to be tracked together
+		 */
+		QE_FLAG_VALID | QE_FLAG_COMPLETE | QE_FLAG_NOT_EOP,
+};
+
 #ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
 #define SW_LOG_INFO(fmt, args...) \
 	RTE_LOG(INFO, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
@@ -210,6 +234,8 @@ struct sw_evdev {
 	/* Contains all ports - load balanced and directed */
 	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
 
+	rte_atomic32_t inflights __rte_cache_aligned;
+
 	/*
 	 * max events in this instance. Cached here for performance.
 	 * (also available in data->conf.nb_events_limit)
@@ -239,4 +265,12 @@ sw_pmd_priv_const(const struct rte_eventdev *eventdev)
 	return eventdev->data->dev_private;
 }
 
+uint16_t sw_event_enqueue(void *port, const struct rte_event *ev);
+uint16_t sw_event_enqueue_burst(void *port, const struct rte_event ev[],
+		uint16_t num);
+
+uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
+uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
+			uint64_t wait);
+
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_worker.c b/drivers/event/sw/sw_evdev_worker.c
new file mode 100644
index 0000000..aed1597
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_worker.c
@@ -0,0 +1,188 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+
+#include "sw_evdev.h"
+#include "event_ring.h"
+
+#define PORT_ENQUEUE_MAX_BURST_SIZE 64
+
+static inline void
+sw_event_release(struct sw_port *p, uint8_t index)
+{
+	/*
+	 * Drops the next outstanding event in our history. Used on dequeue
+	 * to clear any history before dequeuing more events.
+	 */
+	RTE_SET_USED(index);
+
+	/* create drop message */
+	struct rte_event ev = {
+		.op = sw_qe_flag_map[RTE_EVENT_OP_RELEASE],
+	};
+
+	uint16_t free_count;
+	qe_ring_enqueue_burst(p->rx_worker_ring, &ev, 1, &free_count);
+
+	/* each release returns one credit */
+	p->outstanding_releases--;
+	p->inflight_credits++;
+}
+
+uint16_t
+sw_event_enqueue_burst(void *port, const struct rte_event ev[], uint16_t num)
+{
+	int32_t i;
+	uint8_t new_ops[PORT_ENQUEUE_MAX_BURST_SIZE];
+	struct sw_port *p = port;
+	struct sw_evdev *sw = (void *)p->sw;
+	uint32_t sw_inflights = rte_atomic32_read(&sw->inflights);
+
+	if (p->inflight_max < sw_inflights)
+		return 0;
+	if (num > PORT_ENQUEUE_MAX_BURST_SIZE)
+		num = PORT_ENQUEUE_MAX_BURST_SIZE;
+
+	if (p->inflight_credits < num) {
+		/* Check if sending events would bring instance over the
+		 * max events threshold
+		 */
+		uint32_t credit_update_quanta = sw->credit_update_quanta;
+		if (sw_inflights + credit_update_quanta > sw->nb_events_limit)
+			return 0;
+
+		rte_atomic32_add(&sw->inflights, credit_update_quanta);
+		p->inflight_credits += (credit_update_quanta);
+
+		if (p->inflight_credits < num)
+			return 0;
+	}
+
+	for (i = 0; i < num; i++) {
+		int op = ev[i].op;
+		int outstanding = p->outstanding_releases > 0;
+		const uint8_t invalid_qid = (ev[i].queue_id >= sw->qid_count);
+
+		p->inflight_credits -= (op == RTE_EVENT_OP_NEW);
+		p->inflight_credits += (op == RTE_EVENT_OP_RELEASE) *
+					outstanding;
+
+		new_ops[i] = sw_qe_flag_map[op];
+		new_ops[i] &= ~(invalid_qid << QE_FLAG_VALID_SHIFT);
+
+		/* FWD and RELEASE packets will both resolve to taken (assuming
+		 * correct usage of the API), providing very high correct
+		 * prediction rate.
+		 */
+		if ((new_ops[i] & QE_FLAG_COMPLETE) && outstanding)
+			p->outstanding_releases--;
+		/* Branch to avoid touching p->stats except error case */
+		if (invalid_qid)
+			p->stats.rx_dropped++;
+	}
+
+	/* returns number of events actually enqueued */
+	uint32_t enq = qe_ring_enqueue_burst_with_ops(p->rx_worker_ring, ev, i,
+					     new_ops);
+	if (p->outstanding_releases == 0 && p->last_dequeue_burst_sz != 0) {
+		uint64_t burst_ticks = rte_get_timer_cycles() -
+				p->last_dequeue_ticks;
+		uint64_t burst_pkt_ticks =
+			burst_ticks / p->last_dequeue_burst_sz;
+		p->avg_pkt_ticks -= p->avg_pkt_ticks / NUM_SAMPLES;
+		p->avg_pkt_ticks += burst_pkt_ticks / NUM_SAMPLES;
+		p->last_dequeue_ticks = 0;
+	}
+	return enq;
+}
+
+uint16_t
+sw_event_enqueue(void *port, const struct rte_event *ev)
+{
+	return sw_event_enqueue_burst(port, ev, 1);
+}
+
+uint16_t
+sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
+		uint64_t wait)
+{
+	RTE_SET_USED(wait);
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = (void *)p->sw;
+	struct qe_ring *ring = p->cq_worker_ring;
+	uint32_t credit_update_quanta = sw->credit_update_quanta;
+
+	/* check that all previous dequeues have been released */
+	if (!p->is_directed) {
+		uint16_t out_rels = p->outstanding_releases;
+		uint16_t i;
+		for (i = 0; i < out_rels; i++)
+			sw_event_release(p, i);
+	}
+
+	/* Intel modification: may not be in final API */
+	if (ev == 0)
+		return 0;
+
+	/* returns number of events actually dequeued */
+	uint16_t ndeq = qe_ring_dequeue_burst(ring, ev, num);
+	if (ndeq == 0) {
+		p->outstanding_releases = 0;
+		p->zero_polls++;
+		p->total_polls++;
+		goto end;
+	}
+
+	/* only add credits for directed ports - LB ports send RELEASEs */
+	p->inflight_credits += ndeq * p->is_directed;
+	p->outstanding_releases = ndeq;
+	p->last_dequeue_burst_sz = ndeq;
+	p->last_dequeue_ticks = rte_get_timer_cycles();
+	p->poll_buckets[(ndeq - 1) >> SW_DEQ_STAT_BUCKET_SHIFT]++;
+	p->total_polls++;
+
+end:
+	if (p->inflight_credits >= credit_update_quanta * 2 &&
+			p->inflight_credits > credit_update_quanta + ndeq) {
+		rte_atomic32_sub(&sw->inflights, credit_update_quanta);
+		p->inflight_credits -= credit_update_quanta;
+	}
+	return ndeq;
+}
+
+uint16_t
+sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait)
+{
+	return sw_event_dequeue_burst(port, ev, 1, wait);
+}
-- 
2.7.4

[dpdk-dev] [PATCH v3 13/17] event/sw: add scheduling logic

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the scheduling function which takes the events from the
producer queues and buffers them before scheduling them to consumer
queues. The scheduling logic includes support for atomic, reordered,
and parallel scheduling of flows.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile             |   1 +
 drivers/event/sw/sw_evdev.c           |   1 +
 drivers/event/sw/sw_evdev.h           |  11 +
 drivers/event/sw/sw_evdev_scheduler.c | 602 ++++++++++++++++++++++++++++++++++
 4 files changed, 615 insertions(+)
 create mode 100644 drivers/event/sw/sw_evdev_scheduler.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index b6ecd91..a7f5b3d 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -54,6 +54,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_scheduler.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index adff729..68c4d0b 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -530,6 +530,7 @@ sw_probe(const char *name, const char *params)
 	dev->enqueue_burst = sw_event_enqueue_burst;
 	dev->dequeue = sw_event_dequeue;
 	dev->dequeue_burst = sw_event_dequeue_burst;
+	dev->schedule = sw_event_schedule;
 
 	sw = dev->data->dev_private;
 	sw->data = dev->data;
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index ab372fd..7c157c7 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -248,8 +248,18 @@ struct sw_evdev {
 	/* Cache how many packets are in each cq */
 	uint16_t cq_ring_space[SW_PORTS_MAX] __rte_cache_aligned;
 
+	/* Array of pointers to load-balanced QIDs sorted by priority level */
+	struct sw_qid *qids_prioritized[RTE_EVENT_MAX_QUEUES_PER_DEV];
+
+	/* Stats */
+	struct sw_point_stats stats __rte_cache_aligned;
+	uint64_t sched_called;
 	int32_t sched_quanta;
+	uint64_t sched_no_iq_enqueues;
+	uint64_t sched_no_cq_enqueues;
+	uint64_t sched_cq_qid_called;
 
+	uint8_t started;
 	uint32_t credit_update_quanta;
 };
 
@@ -272,5 +282,6 @@ uint16_t sw_event_enqueue_burst(void *port, const struct rte_event ev[],
 uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
 uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
 			uint64_t wait);
+void sw_event_schedule(struct rte_eventdev *dev);
 
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_scheduler.c b/drivers/event/sw/sw_evdev_scheduler.c
new file mode 100644
index 0000000..2aecc95
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_scheduler.c
@@ -0,0 +1,602 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_ring.h>
+#include <rte_hash_crc.h>
+#include "sw_evdev.h"
+#include "iq_ring.h"
+#include "event_ring.h"
+
+#define SW_IQS_MASK (SW_IQS_MAX-1)
+
+/* Retrieve the highest priority IQ or -1 if no pkts available. Doing the
+ * CLZ twice is faster than caching the value due to data dependencies
+ */
+#define PKT_MASK_TO_IQ(pkts) \
+	(__builtin_ctz(pkts | (1 << SW_IQS_MAX)))
+
+/* Clamp the highest priorities to the max value as allowed by
+ * the mask. Assums MASK is (powerOfTwo - 1). Priority 0 (highest) are shifted
+ * into leftmost IQ so that clz() reads it first on dequeue
+ */
+#define PRIO_TO_IQ(prio) (prio > SW_IQS_MASK ? SW_IQS_MASK : prio)
+
+#define MAX_PER_IQ_DEQUEUE 48
+#define FLOWID_MASK (SW_QID_NUM_FIDS-1)
+
+static inline uint32_t
+sw_schedule_atomic_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count)
+{
+	struct rte_event qes[MAX_PER_IQ_DEQUEUE]; /* count <= MAX */
+	struct rte_event blocked_qes[MAX_PER_IQ_DEQUEUE];
+	uint32_t nb_blocked = 0;
+	uint32_t i;
+
+	if (count > MAX_PER_IQ_DEQUEUE)
+		count = MAX_PER_IQ_DEQUEUE;
+
+	/* This is the QID ID. The QID ID is static, hence it can be
+	 * used to identify the stage of processing in history lists etc
+	 */
+	uint32_t qid_id = qid->id;
+
+	iq_ring_dequeue_burst(qid->iq[iq_num], qes, count);
+	for (i = 0; i < count; i++) {
+		const struct rte_event *qe = &qes[i];
+		/* use cheap bit mixing, we only need to lose a few bits */
+		uint32_t flow_id32 = (qes[i].flow_id) ^ (qes[i].flow_id >> 10);
+		const uint16_t flow_id = FLOWID_MASK & flow_id32;
+		struct sw_fid_t *fid = &qid->fids[flow_id];
+		int cq = fid->cq;
+
+		if (cq < 0) {
+			uint32_t cq_idx = qid->cq_next_tx++;
+			if (qid->cq_next_tx == qid->cq_num_mapped_cqs)
+				qid->cq_next_tx = 0;
+			cq = qid->cq_map[cq_idx];
+
+			/* find least used */
+			int cq_free_cnt = sw->cq_ring_space[cq];
+			for (cq_idx = 0; cq_idx < qid->cq_num_mapped_cqs;
+					cq_idx++) {
+				int test_cq = qid->cq_map[cq_idx];
+				int test_cq_free = sw->cq_ring_space[test_cq];
+				if (test_cq_free > cq_free_cnt) {
+					cq = test_cq;
+					cq_free_cnt = test_cq_free;
+				}
+			}
+
+			fid->cq = cq; /* this pins early */
+		}
+
+		if (sw->cq_ring_space[cq] == 0 ||
+				sw->ports[cq].inflights == SW_PORT_HIST_LIST) {
+			blocked_qes[nb_blocked++] = *qe;
+			continue;
+		}
+
+		struct sw_port *p = &sw->ports[cq];
+
+		/* at this point we can queue up the packet on the cq_buf */
+		fid->pcount++;
+		p->cq_buf[p->cq_buf_count++] = *qe;
+		p->inflights++;
+		sw->cq_ring_space[cq]--;
+
+		int head = (p->hist_head++ & (SW_PORT_HIST_LIST-1));
+		p->hist_list[head].fid = flow_id;
+		p->hist_list[head].qid = qid_id;
+
+		p->stats.tx_pkts++;
+		qid->stats.tx_pkts++;
+
+		/* if we just filled in the last slot, flush the buffer */
+		if (sw->cq_ring_space[cq] == 0) {
+			struct qe_ring *worker = p->cq_worker_ring;
+			qe_ring_enqueue_burst(worker, p->cq_buf,
+					p->cq_buf_count,
+					&sw->cq_ring_space[cq]);
+			p->cq_buf_count = 0;
+		}
+	}
+	iq_ring_put_back(qid->iq[iq_num], blocked_qes, nb_blocked);
+
+	return count - nb_blocked;
+}
+
+static inline uint32_t
+sw_schedule_parallel_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count, int keep_order)
+{
+	uint32_t i;
+	uint32_t cq_idx = qid->cq_next_tx;
+
+	/* This is the QID ID. The QID ID is static, hence it can be
+	 * used to identify the stage of processing in history lists etc
+	 */
+	uint32_t qid_id = qid->id;
+
+	if (count > MAX_PER_IQ_DEQUEUE)
+		count = MAX_PER_IQ_DEQUEUE;
+
+	if (keep_order)
+		/* only schedule as many as we have reorder buffer entries */
+		count = RTE_MIN(count,
+				rte_ring_count(qid->reorder_buffer_freelist));
+
+	for (i = 0; i < count; i++) {
+		const struct rte_event *qe = iq_ring_peek(qid->iq[iq_num]);
+		uint32_t cq_check_count = 0;
+		uint32_t cq;
+
+		/*
+		 *  for parallel, just send to next available CQ in round-robin
+		 * fashion. So scan for an available CQ. If all CQs are full
+		 * just return and move on to next QID
+		 */
+		do {
+			if (++cq_check_count > qid->cq_num_mapped_cqs)
+				goto exit;
+			cq = qid->cq_map[cq_idx];
+			if (++cq_idx == qid->cq_num_mapped_cqs)
+				cq_idx = 0;
+		} while (qe_ring_free_count(sw->ports[cq].cq_worker_ring) == 0 ||
+				sw->ports[cq].inflights == SW_PORT_HIST_LIST);
+
+		struct sw_port *p = &sw->ports[cq];
+		if (sw->cq_ring_space[cq] == 0 ||
+				p->inflights == SW_PORT_HIST_LIST)
+			break;
+
+		sw->cq_ring_space[cq]--;
+
+		qid->stats.tx_pkts++;
+
+		const int head = (p->hist_head & (SW_PORT_HIST_LIST-1));
+
+		p->hist_list[head].fid = qe->flow_id;
+		p->hist_list[head].qid = qid_id;
+
+		if (keep_order)
+			rte_ring_sc_dequeue(qid->reorder_buffer_freelist,
+					(void *)&p->hist_list[head].rob_entry);
+
+		sw->ports[cq].cq_buf[sw->ports[cq].cq_buf_count++] = *qe;
+		iq_ring_pop(qid->iq[iq_num]);
+
+		rte_compiler_barrier();
+		p->inflights++;
+		p->stats.tx_pkts++;
+		p->hist_head++;
+	}
+exit:
+	qid->cq_next_tx = cq_idx;
+	return i;
+}
+
+static uint32_t
+sw_schedule_dir_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count __rte_unused)
+{
+	uint32_t cq_id = qid->cq_map[0];
+	struct sw_port *port = &sw->ports[cq_id];
+
+	/* get max burst enq size for cq_ring */
+	uint32_t count_free = sw->cq_ring_space[cq_id];
+	if (count_free == 0)
+		return 0;
+
+	/* burst dequeue from the QID IQ ring */
+	struct iq_ring *ring = qid->iq[iq_num];
+	uint32_t ret = iq_ring_dequeue_burst(ring,
+			&port->cq_buf[port->cq_buf_count], count_free);
+	port->cq_buf_count += ret;
+
+	/* Update QID, Port and Total TX stats */
+	qid->stats.tx_pkts += ret;
+	port->stats.tx_pkts += ret;
+
+	/* Subtract credits from cached value */
+	sw->cq_ring_space[cq_id] -= ret;
+
+	return ret;
+}
+
+static uint32_t
+sw_schedule_qid_to_cq(struct sw_evdev *sw)
+{
+	uint32_t pkts = 0;
+	uint32_t qid_idx;
+
+	sw->sched_cq_qid_called++;
+
+	for (qid_idx = 0; qid_idx < sw->qid_count; qid_idx++) {
+		struct sw_qid *qid = sw->qids_prioritized[qid_idx];
+
+		int type = qid->type;
+		int iq_num = PKT_MASK_TO_IQ(qid->iq_pkt_mask);
+
+		/* zero mapped CQs indicates directed */
+		if (iq_num >= SW_IQS_MAX)
+			continue;
+
+		uint32_t pkts_done = 0;
+		uint32_t count = iq_ring_count(qid->iq[iq_num]);
+
+		if (count > 0) {
+			if (type == SW_SCHED_TYPE_DIRECT)
+				pkts_done += sw_schedule_dir_to_cq(sw, qid,
+						iq_num, count);
+			else if (type == RTE_SCHED_TYPE_ATOMIC)
+				pkts_done += sw_schedule_atomic_to_cq(sw, qid,
+						iq_num, count);
+			else
+				pkts_done += sw_schedule_parallel_to_cq(sw, qid,
+						iq_num, count,
+						type == RTE_SCHED_TYPE_ORDERED);
+		}
+
+		/* Check if the IQ that was polled is now empty, and unset it
+		 * in the IQ mask if its empty.
+		 */
+		int all_done = (pkts_done == count);
+
+		qid->iq_pkt_mask &= ~(all_done << (iq_num));
+		pkts += pkts_done;
+	}
+
+	return pkts;
+}
+
+/* This function will perform re-ordering of packets, and injecting into
+ * the appropriate QID IQ. As LB and DIR QIDs are in the same array, but *NOT*
+ * contiguous in that array, this function accepts a "range" of QIDs to scan.
+ */
+static uint16_t
+sw_schedule_reorder(struct sw_evdev *sw, int qid_start, int qid_end)
+{
+	/* Perform egress reordering */
+	struct rte_event *qe;
+	uint32_t pkts_iter = 0;
+
+	for (; qid_start < qid_end; qid_start++) {
+		struct sw_qid *qid = &sw->qids[qid_start];
+		int i, num_entries_in_use;
+
+		if (qid->type != RTE_SCHED_TYPE_ORDERED)
+			continue;
+
+		num_entries_in_use = rte_ring_free_count(
+					qid->reorder_buffer_freelist);
+
+		for (i = 0; i < num_entries_in_use; i++) {
+			struct reorder_buffer_entry *entry;
+			int j;
+
+			entry = &qid->reorder_buffer[qid->reorder_buffer_index];
+
+			if (!entry->ready)
+				break;
+
+			for (j = 0; j < entry->num_fragments; j++) {
+				uint16_t dest_qid;
+				uint16_t dest_iq;
+
+				int idx = entry->fragment_index + j;
+				qe = &entry->fragments[idx];
+
+				dest_qid = qe->queue_id;
+				dest_iq  = PRIO_TO_IQ(qe->priority);
+
+				if (dest_qid >= sw->qid_count) {
+					sw->stats.rx_dropped++;
+					continue;
+				}
+
+				struct sw_qid *dest_qid_ptr =
+					&sw->qids[dest_qid];
+				const struct iq_ring *dest_iq_ptr =
+					dest_qid_ptr->iq[dest_iq];
+				if (iq_ring_free_count(dest_iq_ptr) == 0)
+					break;
+
+				pkts_iter++;
+
+				struct sw_qid *q = &sw->qids[dest_qid];
+				struct iq_ring *r = q->iq[dest_iq];
+
+				/* we checked for space above, so enqueue must
+				 * succeed
+				 */
+				iq_ring_enqueue(r, qe);
+				q->iq_pkt_mask |= (1 << (dest_iq));
+				q->iq_pkt_count[dest_iq]++;
+				q->stats.rx_pkts++;
+			}
+
+			entry->ready = (j != entry->num_fragments);
+			entry->num_fragments -= j;
+			entry->fragment_index += j;
+
+			if (!entry->ready) {
+				entry->fragment_index = 0;
+
+				rte_ring_sp_enqueue(
+						qid->reorder_buffer_freelist,
+						entry);
+
+				qid->reorder_buffer_index++;
+				qid->reorder_buffer_index %= qid->window_size;
+			}
+		}
+	}
+	return pkts_iter;
+}
+
+static inline void __attribute__((always_inline))
+sw_refill_pp_buf(struct sw_evdev *sw, struct sw_port *port)
+{
+	RTE_SET_USED(sw);
+	struct qe_ring *worker = port->rx_worker_ring;
+	port->pp_buf_start = 0;
+	port->pp_buf_count = qe_ring_dequeue_burst(worker, port->pp_buf,
+			RTE_DIM(port->pp_buf));
+}
+
+static inline uint32_t __attribute__((always_inline))
+__pull_port_lb(struct sw_evdev *sw, uint32_t port_id, int allow_reorder)
+{
+	static const struct reorder_buffer_entry dummy_rob;
+	uint32_t pkts_iter = 0;
+	struct sw_port *port = &sw->ports[port_id];
+
+	/* If shadow ring has 0 pkts, pull from worker ring */
+	if (port->pp_buf_count == 0)
+		sw_refill_pp_buf(sw, port);
+
+	while (port->pp_buf_count) {
+		const struct rte_event *qe = &port->pp_buf[port->pp_buf_start];
+		struct sw_hist_list_entry *hist_entry = NULL;
+		uint8_t flags = qe->op;
+		const uint16_t eop = !(flags & QE_FLAG_NOT_EOP);
+		int needs_reorder = 0;
+		/* if no-reordering, having PARTIAL == NEW */
+		if (!allow_reorder && !eop)
+			flags = QE_FLAG_VALID;
+
+		/*
+		 * if we don't have space for this packet in an IQ,
+		 * then move on to next queue. Technically, for a
+		 * packet that needs reordering, we don't need to check
+		 * here, but it simplifies things not to special-case
+		 */
+		uint32_t iq_num = PRIO_TO_IQ(qe->priority);
+		struct sw_qid *qid = &sw->qids[qe->queue_id];
+
+		if ((flags & QE_FLAG_VALID) &&
+				iq_ring_free_count(qid->iq[iq_num]) == 0)
+			break;
+
+		/* now process based on flags. Note that for directed
+		 * queues, the enqueue_flush masks off all but the
+		 * valid flag. This makes FWD and PARTIAL enqueues just
+		 * NEW type, and makes DROPS no-op calls.
+		 */
+		if ((flags & QE_FLAG_COMPLETE) && port->inflights > 0) {
+			const uint32_t hist_tail = port->hist_tail &
+					(SW_PORT_HIST_LIST - 1);
+
+			hist_entry = &port->hist_list[hist_tail];
+			const uint32_t hist_qid = hist_entry->qid;
+			const uint32_t hist_fid = hist_entry->fid;
+
+			struct sw_fid_t *fid =
+				&sw->qids[hist_qid].fids[hist_fid];
+			fid->pcount -= eop;
+			if (fid->pcount == 0)
+				fid->cq = -1;
+
+			if (allow_reorder) {
+				/* set reorder ready if an ordered QID */
+				uintptr_t rob_ptr =
+					(uintptr_t)hist_entry->rob_entry;
+				const uintptr_t valid = (rob_ptr != 0);
+				needs_reorder = valid;
+				rob_ptr |=
+					((valid - 1) & (uintptr_t)&dummy_rob);
+				struct reorder_buffer_entry *tmp_rob_ptr =
+					(struct reorder_buffer_entry *)rob_ptr;
+				tmp_rob_ptr->ready = eop * needs_reorder;
+			}
+
+			port->inflights -= eop;
+			port->hist_tail += eop;
+		}
+		if (flags & QE_FLAG_VALID) {
+			port->stats.rx_pkts++;
+
+			if (allow_reorder && needs_reorder) {
+				struct reorder_buffer_entry *rob_entry =
+						hist_entry->rob_entry;
+
+				/* Although fragmentation not currently
+				 * supported by eventdev API, we support it
+				 * here. Open: How do we alert the user that
+				 * they've exceeded max frags?
+				 */
+				int num_frag = rob_entry->num_fragments;
+				if (num_frag == SW_FRAGMENTS_MAX)
+					sw->stats.rx_dropped++;
+				else {
+					int idx = rob_entry->num_fragments++;
+					rob_entry->fragments[idx] = *qe;
+				}
+				goto end_qe;
+			}
+
+			/* Use the iq_num from above to push the QE
+			 * into the qid at the right priority
+			 */
+
+			qid->iq_pkt_mask |= (1 << (iq_num));
+			iq_ring_enqueue(qid->iq[iq_num], qe);
+			qid->iq_pkt_count[iq_num]++;
+			qid->stats.rx_pkts++;
+			pkts_iter++;
+		}
+
+end_qe:
+		port->pp_buf_start++;
+		port->pp_buf_count--;
+	} /* while (avail_qes) */
+
+	return pkts_iter;
+}
+
+static uint32_t
+sw_schedule_pull_port_lb(struct sw_evdev *sw, uint32_t port_id)
+{
+	return __pull_port_lb(sw, port_id, 1);
+}
+
+static uint32_t
+sw_schedule_pull_port_no_reorder(struct sw_evdev *sw, uint32_t port_id)
+{
+	return __pull_port_lb(sw, port_id, 0);
+}
+
+static uint32_t
+sw_schedule_pull_port_dir(struct sw_evdev *sw, uint32_t port_id)
+{
+	uint32_t pkts_iter = 0;
+	struct sw_port *port = &sw->ports[port_id];
+
+	/* If shadow ring has 0 pkts, pull from worker ring */
+	if (port->pp_buf_count == 0)
+		sw_refill_pp_buf(sw, port);
+
+	while (port->pp_buf_count) {
+		const struct rte_event *qe = &port->pp_buf[port->pp_buf_start];
+		uint8_t flags = qe->op;
+
+		if ((flags & QE_FLAG_VALID) == 0)
+			goto end_qe;
+
+		uint32_t iq_num = PRIO_TO_IQ(qe->priority);
+		struct sw_qid *qid = &sw->qids[qe->queue_id];
+		struct iq_ring *iq_ring = qid->iq[iq_num];
+
+		if (iq_ring_free_count(iq_ring) == 0)
+			break; /* move to next port */
+
+		port->stats.rx_pkts++;
+
+		/* Use the iq_num from above to push the QE
+		 * into the qid at the right priority
+		 */
+		qid->iq_pkt_mask |= (1 << (iq_num));
+		iq_ring_enqueue(iq_ring, qe);
+		qid->iq_pkt_count[iq_num]++;
+		qid->stats.rx_pkts++;
+		pkts_iter++;
+
+end_qe:
+		port->pp_buf_start++;
+		port->pp_buf_count--;
+	} /* while port->pp_buf_count */
+
+	return pkts_iter;
+}
+
+void
+sw_event_schedule(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t in_pkts, out_pkts;
+	uint32_t out_pkts_total = 0, in_pkts_total = 0;
+	int32_t sched_quanta = sw->sched_quanta;
+	uint32_t i;
+
+	sw->sched_called++;
+	if (!sw->started)
+		return;
+
+	do {
+		uint32_t in_pkts_this_iteration = 0;
+
+		/* Pull from rx_ring for ports */
+		do {
+			in_pkts = 0;
+			for (i = 0; i < sw->port_count; i++)
+				if (sw->ports[i].is_directed)
+					in_pkts += sw_schedule_pull_port_dir(sw, i);
+				else if (sw->ports[i].num_ordered_qids > 0)
+					in_pkts += sw_schedule_pull_port_lb(sw, i);
+				else
+					in_pkts += sw_schedule_pull_port_no_reorder(sw, i);
+
+			/* QID scan for re-ordered */
+			in_pkts += sw_schedule_reorder(sw, 0,
+					sw->qid_count);
+			in_pkts_this_iteration += in_pkts;
+		} while (in_pkts > 4 &&
+				(int)in_pkts_this_iteration < sched_quanta);
+
+		out_pkts = 0;
+		out_pkts += sw_schedule_qid_to_cq(sw);
+		out_pkts_total += out_pkts;
+		in_pkts_total += in_pkts_this_iteration;
+
+		if (in_pkts == 0 && out_pkts == 0)
+			break;
+	} while ((int)out_pkts_total < sched_quanta);
+
+	/* push all the internal buffered QEs in port->cq_ring to the
+	 * worker cores: aka, do the ring transfers batched.
+	 */
+	for (i = 0; i < sw->port_count; i++) {
+		struct qe_ring *worker = sw->ports[i].cq_worker_ring;
+		qe_ring_enqueue_burst(worker, sw->ports[i].cq_buf,
+				sw->ports[i].cq_buf_count,
+				&sw->cq_ring_space[i]);
+		sw->ports[i].cq_buf_count = 0;
+	}
+
+	sw->stats.tx_pkts += out_pkts_total;
+	sw->stats.rx_pkts += in_pkts_total;
+
+	sw->sched_no_iq_enqueues += (in_pkts_total == 0);
+	sw->sched_no_cq_enqueues += (out_pkts_total == 0);
+
+}
-- 
2.7.4

[dpdk-dev] [PATCH v3 14/17] event/sw: add start stop and close functions

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 74 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 68c4d0b..6fa7d71 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -415,6 +415,77 @@ sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 }
 
 static int
+sw_start(struct rte_eventdev *dev)
+{
+	unsigned int i, j;
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	/* check all ports are set up */
+	for (i = 0; i < sw->port_count; i++)
+		if (sw->ports[i].rx_worker_ring == NULL) {
+			printf("%s %d: port %d not configured\n",
+			       __func__, __LINE__, i);
+			return -1;
+		}
+
+	/* check all queues are configured and mapped to ports*/
+	for (i = 0; i < sw->qid_count; i++)
+		if (sw->qids[i].iq[0] == NULL ||
+				sw->qids[i].cq_num_mapped_cqs == 0) {
+			printf("%s %d: queue %d not configured\n",
+			       __func__, __LINE__, i);
+			return -1;
+		}
+
+	/* build up our prioritized array of qids */
+	/* We don't use qsort here, as if all/multiple entries have the same
+	 * priority, the result is non-deterministic. From "man 3 qsort":
+	 * "If two members compare as equal, their order in the sorted
+	 * array is undefined."
+	 */
+	uint32_t qidx = 0;
+	for (j = 0; j <= RTE_EVENT_DEV_PRIORITY_LOWEST; j++) {
+		for (i = 0; i < sw->qid_count; i++) {
+			if (sw->qids[i].priority == j) {
+				sw->qids_prioritized[qidx] = &sw->qids[i];
+				qidx++;
+			}
+		}
+	}
+	sw->started = 1;
+	return 0;
+}
+
+static void
+sw_stop(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	sw->started = 0;
+}
+
+static int
+sw_close(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t i;
+
+	for (i = 0; i < sw->qid_count; i++)
+		sw_queue_release(dev, i);
+	sw->qid_count = 0;
+
+	for (i = 0; i < sw->port_count; i++)
+		sw_port_release(&sw->ports[i]);
+	sw->port_count = 0;
+
+	memset(&sw->stats, 0, sizeof(sw->stats));
+	sw->sched_called = 0;
+	sw->sched_no_iq_enqueues = 0;
+	sw->sched_no_cq_enqueues = 0;
+	sw->sched_cq_qid_called = 0;
+
+	return 0;
+}
+
+static int
 assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
 {
 	int *socket_id = opaque;
@@ -450,6 +521,9 @@ sw_probe(const char *name, const char *params)
 	static const struct rte_eventdev_ops evdev_sw_ops = {
 			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
+			.dev_close = sw_close,
+			.dev_start = sw_start,
+			.dev_stop = sw_stop,
 
 			.queue_def_conf = sw_queue_def_conf,
 			.queue_setup = sw_queue_setup,
-- 
2.7.4

[dpdk-dev] [PATCH v3 15/17] event/sw: add dump function for easier debugging

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Segfault issue resolved when only partially configured and
rte_event_dev_dump() is called before start(),
Reported-by: Vipin Varghese <vipin.varghese@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 148 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 6fa7d71..8b7d8ed 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -414,6 +414,153 @@ sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 	*info = evdev_sw_info;
 }
 
+static void
+sw_dump(struct rte_eventdev *dev, FILE *f)
+{
+	const struct sw_evdev *sw = sw_pmd_priv(dev);
+
+	static const char * const q_type_strings[] = {
+			"Ordered", "Atomic", "Parallel", "Directed"
+	};
+	uint32_t i;
+	fprintf(f, "EventDev %s: ports %d, qids %d\n", "todo-fix-name",
+			sw->port_count, sw->qid_count);
+
+	fprintf(f, "\trx   %"PRIu64"\n\tdrop %"PRIu64"\n\ttx   %"PRIu64"\n",
+		sw->stats.rx_pkts, sw->stats.rx_dropped, sw->stats.tx_pkts);
+	fprintf(f, "\tsched calls: %"PRIu64"\n", sw->sched_called);
+	fprintf(f, "\tsched cq/qid call: %"PRIu64"\n", sw->sched_cq_qid_called);
+	fprintf(f, "\tsched no IQ enq: %"PRIu64"\n", sw->sched_no_iq_enqueues);
+	fprintf(f, "\tsched no CQ enq: %"PRIu64"\n", sw->sched_no_cq_enqueues);
+	uint32_t inflights = rte_atomic32_read(&sw->inflights);
+	uint32_t credits = sw->nb_events_limit - inflights;
+	fprintf(f, "\tinflight %d, credits: %d\n", inflights, credits);
+
+#define COL_RED "\x1b[31m"
+#define COL_RESET "\x1b[0m"
+
+	for (i = 0; i < sw->port_count; i++) {
+		int max, j;
+		const struct sw_port *p = &sw->ports[i];
+		if (!p->initialized) {
+			fprintf(f, "  %sPort %d not initialized.%s\n",
+				COL_RED, i, COL_RESET);
+			continue;
+		}
+		fprintf(f, "  Port %d %s\n", i,
+			p->is_directed ? " (SingleCons)" : "");
+		fprintf(f, "\trx   %"PRIu64"\tdrop %"PRIu64"\ttx   %"PRIu64
+			"\t%sinflight %d%s\n", sw->ports[i].stats.rx_pkts,
+			sw->ports[i].stats.rx_dropped,
+			sw->ports[i].stats.tx_pkts,
+			(p->inflights == p->inflight_max) ?
+				COL_RED : COL_RESET,
+			sw->ports[i].inflights, COL_RESET);
+
+		fprintf(f, "\tMax New: %u"
+			"\tAvg cycles PP: %"PRIu64"\tCredits: %u\n",
+			sw->ports[i].inflight_max,
+			sw->ports[i].avg_pkt_ticks,
+			sw->ports[i].inflight_credits);
+		fprintf(f, "\tReceive burst distribution:\n");
+		float zp_percent = p->zero_polls * 100.0 / p->total_polls;
+		fprintf(f, zp_percent < 10 ? "\t\t0:%.02f%% " : "\t\t0:%.0f%% ",
+				zp_percent);
+		for (max = (int)RTE_DIM(p->poll_buckets); max-- > 0;)
+			if (p->poll_buckets[max] != 0)
+				break;
+		for (j = 0; j <= max; j++) {
+			if (p->poll_buckets[j] != 0) {
+				float poll_pc = p->poll_buckets[j] * 100.0 /
+					p->total_polls;
+				fprintf(f, "%u-%u:%.02f%% ",
+					((j << SW_DEQ_STAT_BUCKET_SHIFT) + 1),
+					((j+1) << SW_DEQ_STAT_BUCKET_SHIFT),
+					poll_pc);
+			}
+		}
+		fprintf(f, "\n");
+
+		if (p->rx_worker_ring) {
+			uint64_t used = qe_ring_count(p->rx_worker_ring);
+			uint64_t space = qe_ring_free_count(p->rx_worker_ring);
+			const char *col = (space == 0) ? COL_RED : COL_RESET;
+			fprintf(f, "\t%srx ring used: %4"PRIu64"\tfree: %4"
+					PRIu64 COL_RESET"\n", col, used, space);
+		} else
+			fprintf(f, "\trx ring not initialized.\n");
+
+		if (p->cq_worker_ring) {
+			uint64_t used = qe_ring_count(p->cq_worker_ring);
+			uint64_t space = qe_ring_free_count(p->cq_worker_ring);
+			const char *col = (space == 0) ? COL_RED : COL_RESET;
+			fprintf(f, "\t%scq ring used: %4"PRIu64"\tfree: %4"
+					PRIu64 COL_RESET"\n", col, used, space);
+		} else
+			fprintf(f, "\tcq ring not initialized.\n");
+	}
+
+	for (i = 0; i < sw->qid_count; i++) {
+		const struct sw_qid *qid = &sw->qids[i];
+		if (!qid->initialized) {
+			fprintf(f, "  %sQueue %d not initialized.%s\n",
+				COL_RED, i, COL_RESET);
+			continue;
+		}
+		int affinities_per_port[SW_PORTS_MAX] = {0};
+		uint32_t inflights = 0;
+
+		fprintf(f, "  Queue %d (%s)\n", i, q_type_strings[qid->type]);
+		fprintf(f, "\trx   %"PRIu64"\tdrop %"PRIu64"\ttx   %"PRIu64"\n",
+			qid->stats.rx_pkts, qid->stats.rx_dropped,
+			qid->stats.tx_pkts);
+		if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+			struct rte_ring *rob_buf_free =
+				qid->reorder_buffer_freelist;
+			if (rob_buf_free)
+				fprintf(f, "\tReorder entries in use: %u\n",
+					rte_ring_free_count(rob_buf_free));
+			else
+				fprintf(f,
+					"\tReorder buffer not initialized\n");
+		}
+
+		uint32_t flow;
+		for (flow = 0; flow < RTE_DIM(qid->fids); flow++)
+			if (qid->fids[flow].cq != -1) {
+				affinities_per_port[qid->fids[flow].cq]++;
+				inflights += qid->fids[flow].pcount;
+			}
+
+		uint32_t cq;
+		fprintf(f, "\tInflights: %u\tFlows pinned per port: ",
+				inflights);
+		for (cq = 0; cq < sw->port_count; cq++)
+			fprintf(f, "%d ", affinities_per_port[cq]);
+		fprintf(f, "\n");
+
+		uint32_t iq;
+		uint32_t iq_printed = 0;
+		for (iq = 0; iq < SW_IQS_MAX; iq++) {
+			if (!qid->iq[iq]) {
+				fprintf(f, "\tiq %d is not initialized.\n", iq);
+				iq_printed = 1;
+				continue;
+			}
+			uint32_t used = iq_ring_count(qid->iq[iq]);
+			uint32_t free = iq_ring_free_count(qid->iq[iq]);
+			const char *col = (free == 0) ? COL_RED : COL_RESET;
+			if (used > 0) {
+				fprintf(f, "\t%siq %d: Used %d\tFree %d"
+					COL_RESET"\n", col, iq, used, free);
+				iq_printed = 1;
+			}
+		}
+		if (iq_printed == 0)
+			fprintf(f, "\t-- iqs empty --\n");
+	}
+}
+
 static int
 sw_start(struct rte_eventdev *dev)
 {
@@ -524,6 +671,7 @@ sw_probe(const char *name, const char *params)
 			.dev_close = sw_close,
 			.dev_start = sw_start,
 			.dev_stop = sw_stop,
+			.dump = sw_dump,
 
 			.queue_def_conf = sw_queue_def_conf,
 			.queue_setup = sw_queue_setup,
-- 
2.7.4

[dpdk-dev] [PATCH v3 16/17] event/sw: add xstats support

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add support for xstats to report out on the state of the eventdev.
Useful for debugging and for unit tests, as well as observability
at runtime and performance tuning of apps to work well with the
scheduler.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile          |   1 +
 drivers/event/sw/sw_evdev.c        |   8 +
 drivers/event/sw/sw_evdev.h        |  21 +-
 drivers/event/sw/sw_evdev_xstats.c | 511 +++++++++++++++++++++++++++++++++++++
 4 files changed, 540 insertions(+), 1 deletion(-)
 create mode 100644 drivers/event/sw/sw_evdev_xstats.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index a7f5b3d..eb0dc4c 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -55,6 +55,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_scheduler.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_xstats.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 8b7d8ed..c273399 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -598,6 +598,8 @@ sw_start(struct rte_eventdev *dev)
 			}
 		}
 	}
+	if (sw_xstats_init(sw) < 0)
+		return -1;
 	sw->started = 1;
 	return 0;
 }
@@ -606,6 +608,7 @@ static void
 sw_stop(struct rte_eventdev *dev)
 {
 	struct sw_evdev *sw = sw_pmd_priv(dev);
+	sw_xstats_uninit(sw);
 	sw->started = 0;
 }
 
@@ -681,6 +684,11 @@ sw_probe(const char *name, const char *params)
 			.port_release = sw_port_release,
 			.port_link = sw_port_link,
 			.port_unlink = sw_port_unlink,
+
+			.xstats_get = sw_xstats_get,
+			.xstats_get_names = sw_xstats_get_names,
+			.xstats_get_by_name = sw_xstats_get_by_name,
+			.xstats_reset = sw_xstats_reset,
 	};
 
 	static const char *const args[] = {
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 7c157c7..690bfa1 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -62,6 +62,8 @@
 
 #define SW_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
 
+#define SW_NUM_POLL_BUCKETS (MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT)
+
 enum {
 	QE_FLAG_VALID_SHIFT = 0,
 	QE_FLAG_COMPLETE_SHIFT,
@@ -203,7 +205,7 @@ struct sw_port {
 	uint64_t avg_pkt_ticks;      /* tracks average over NUM_SAMPLES burst */
 	uint64_t total_polls;        /* how many polls were counted in stats */
 	uint64_t zero_polls;         /* tracks polls returning nothing */
-	uint32_t poll_buckets[MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT];
+	uint32_t poll_buckets[SW_NUM_POLL_BUCKETS];
 		/* bucket values in 4s for shorter reporting */
 
 	/* History list structs, containing info on pkts egressed to worker */
@@ -230,6 +232,11 @@ struct sw_evdev {
 
 	uint32_t port_count;
 	uint32_t qid_count;
+	uint32_t xstats_count;
+	struct sw_xstats_entry *xstats;
+	uint32_t xstats_count_mode_dev;
+	uint32_t xstats_count_mode_port;
+	uint32_t xstats_count_mode_queue;
 
 	/* Contains all ports - load balanced and directed */
 	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
@@ -283,5 +290,17 @@ uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
 uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
 			uint64_t wait);
 void sw_event_schedule(struct rte_eventdev *dev);
+int sw_xstats_init(struct sw_evdev *dev);
+int sw_xstats_uninit(struct sw_evdev *dev);
+int sw_xstats_get_names(const struct rte_eventdev *dev,
+	enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+	struct rte_event_dev_xstats_name *xstats_names, unsigned int size);
+int sw_xstats_get(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		const unsigned int ids[], uint64_t values[], unsigned int n);
+uint64_t sw_xstats_get_by_name(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id);
+int sw_xstats_reset(struct rte_eventdev *dev);
+
 
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_xstats.c b/drivers/event/sw/sw_evdev_xstats.c
new file mode 100644
index 0000000..3354522
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_xstats.c
@@ -0,0 +1,511 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "sw_evdev.h"
+#include "iq_ring.h"
+#include "event_ring.h"
+
+enum xstats_type {
+	/* common stats */
+	rx,
+	tx,
+	dropped,
+	inflight,
+	calls,
+	credits,
+	/* device instance specific */
+	no_iq_enq,
+	no_cq_enq,
+	/* port_specific */
+	rx_used,
+	rx_free,
+	tx_used,
+	tx_free,
+	pkt_cycles,
+	poll_return, /* for zero-count and used also for port bucket loop */
+	/* qid_specific */
+	iq_size,
+	iq_used,
+	/* qid port mapping specific */
+	pinned,
+};
+
+typedef uint64_t (*xstats_fn)(const struct sw_evdev *dev,
+		uint16_t obj_idx, /* port or queue id */
+		enum xstats_type stat, int extra_arg);
+
+struct sw_xstats_entry {
+	struct rte_event_dev_xstats_name name;
+	xstats_fn fn;
+	uint16_t obj_idx;
+	enum xstats_type stat;
+	enum rte_event_dev_xstats_mode mode;
+	int extra_arg;
+};
+
+static uint64_t
+get_dev_stat(const struct sw_evdev *sw, uint16_t obj_idx __rte_unused,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	switch (type) {
+	case rx: return sw->stats.rx_pkts;
+	case tx: return sw->stats.tx_pkts;
+	case dropped: return sw->stats.rx_dropped;
+	case calls: return sw->sched_called;
+	case no_iq_enq: return sw->sched_no_iq_enqueues;
+	case no_cq_enq: return sw->sched_no_cq_enqueues;
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_port_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	const struct sw_port *p = &sw->ports[obj_idx];
+
+	switch (type) {
+	case rx: return p->stats.rx_pkts;
+	case tx: return p->stats.tx_pkts;
+	case dropped: return p->stats.rx_dropped;
+	case inflight: return p->inflights;
+	case pkt_cycles: return p->avg_pkt_ticks;
+	case calls: return p->total_polls;
+	case credits: return p->inflight_credits;
+	case poll_return: return p->zero_polls;
+	case rx_used: return qe_ring_count(p->rx_worker_ring);
+	case rx_free: return qe_ring_free_count(p->rx_worker_ring);
+	case tx_used: return qe_ring_count(p->cq_worker_ring);
+	case tx_free: return qe_ring_free_count(p->cq_worker_ring);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_port_bucket_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_port *p = &sw->ports[obj_idx];
+
+	switch (type) {
+	case poll_return: return p->poll_buckets[extra_arg];
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+
+	switch (type) {
+	case rx: return qid->stats.rx_pkts;
+	case tx: return qid->stats.tx_pkts;
+	case dropped: return qid->stats.rx_dropped;
+	case inflight:
+		do {
+			uint64_t infl = 0;
+			unsigned int i;
+			for (i = 0; i < RTE_DIM(qid->fids); i++)
+				infl += qid->fids[i].pcount;
+			return infl;
+		} while (0);
+		break;
+	case iq_size: return RTE_DIM(qid->iq[0]->ring);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_iq_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+	const int iq_idx = extra_arg;
+
+	switch (type) {
+	case iq_used: return iq_ring_count(qid->iq[iq_idx]);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_port_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+	uint16_t port = extra_arg;
+
+	switch (type) {
+	case pinned:
+		do {
+			uint64_t pin = 0;
+			unsigned int i;
+			for (i = 0; i < RTE_DIM(qid->fids); i++)
+				if (qid->fids[i].cq == port)
+					pin++;
+			return pin;
+		} while (0);
+		break;
+	default: return -1;
+	}
+}
+
+int
+sw_xstats_init(struct sw_evdev *sw)
+{
+	/*
+	 * define the stats names and types. Used to build up the device
+	 * xstats array
+	 * There are multiple set of stats:
+	 *   - device-level,
+	 *   - per-port,
+	 *   - per-port-dequeue-burst-sizes
+	 *   - per-qid,
+	 *   - per-iq
+	 *   - per-port-per-qid
+	 *
+	 * For each of these sets, we have two parallel arrays, one for the
+	 * names, the other for the stat type parameter to be passed in the fn
+	 * call to get that stat. These two arrays must be kept in sync
+	 */
+	static const char * const dev_stats[] = { "rx", "tx", "drop",
+			"sched_calls", "sched_no_iq_enq", "sched_no_cq_enq",
+	};
+	static const enum xstats_type dev_types[] = { rx, tx, dropped,
+			calls, no_iq_enq, no_cq_enq,
+	};
+
+	static const char * const port_stats[] = {"rx", "tx", "drop",
+			"inflight", "avg_pkt_cycles", "credits",
+			"rx_ring_used", "rx_ring_free",
+			"cq_ring_used", "cq_ring_free",
+			"dequeue_calls", "dequeues_returning_0",
+	};
+	static const enum xstats_type port_types[] = { rx, tx, dropped,
+			inflight, pkt_cycles, credits,
+			rx_used, rx_free, tx_used, tx_free,
+			calls, poll_return,
+	};
+
+	static const char * const port_bucket_stats[] = {
+			"dequeues_returning" };
+	static const enum xstats_type port_bucket_types[] = { poll_return };
+
+	static const char * const qid_stats[] = {"rx", "tx", "drop",
+			"inflight", "iq_size"
+	};
+	static const enum xstats_type qid_types[] = { rx, tx, dropped, inflight,
+			iq_size
+	};
+
+	static const char * const qid_iq_stats[] = { "used" };
+	static const enum xstats_type qid_iq_types[] = { iq_used };
+
+	static const char * const qid_port_stats[] = { "pinned_flows" };
+	static const enum xstats_type qid_port_types[] = { pinned };
+	/* ---- end of stat definitions ---- */
+
+	/* check sizes, since a missed comma can lead to strings being
+	 * joined by the compiler.
+	 */
+	RTE_BUILD_BUG_ON(RTE_DIM(dev_stats) != RTE_DIM(dev_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(port_stats) != RTE_DIM(port_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_stats) != RTE_DIM(qid_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_iq_stats) != RTE_DIM(qid_iq_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_port_stats) != RTE_DIM(qid_port_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(port_bucket_stats) !=
+			RTE_DIM(port_bucket_types));
+
+	/* other vars */
+	const uint32_t cons_bkt_shift =
+		(MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT);
+	const unsigned int count = RTE_DIM(dev_stats) +
+			sw->port_count * RTE_DIM(port_stats) +
+			sw->port_count * RTE_DIM(port_bucket_stats) *
+				(cons_bkt_shift + 1) +
+			sw->qid_count * RTE_DIM(qid_stats) +
+			sw->qid_count * SW_IQS_MAX * RTE_DIM(qid_iq_stats) +
+			sw->qid_count * sw->port_count *
+				RTE_DIM(qid_port_stats);
+	unsigned int i, port, qid, iq, bkt, stat = 0;
+
+	sw->xstats = rte_zmalloc_socket(NULL, sizeof(sw->xstats[0]) * count, 0,
+			sw->data->socket_id);
+	if (sw->xstats == NULL)
+		return -ENOMEM;
+
+#define sname sw->xstats[stat].name.name
+	for (i = 0; i < RTE_DIM(dev_stats); i++, stat++) {
+		sw->xstats[stat] = (struct sw_xstats_entry){
+			.fn = get_dev_stat,
+			.stat = dev_types[i],
+			.mode = RTE_EVENT_DEV_XSTATS_DEVICE,
+		};
+		snprintf(sname, sizeof(sname), "dev_%s", dev_stats[i]);
+	}
+	sw->xstats_count_mode_dev = stat;
+
+	for (port = 0; port < sw->port_count; port++) {
+		for (i = 0; i < RTE_DIM(port_stats); i++, stat++) {
+			sw->xstats[stat] = (struct sw_xstats_entry){
+				.fn = get_port_stat,
+				.obj_idx = port,
+				.stat = port_types[i],
+				.mode = RTE_EVENT_DEV_XSTATS_PORT,
+			};
+			snprintf(sname, sizeof(sname), "port_%u_%s",
+					port, port_stats[i]);
+		}
+
+		for (bkt = 0; bkt < (sw->ports[port].cq_worker_ring->size >>
+				SW_DEQ_STAT_BUCKET_SHIFT) + 1; bkt++) {
+			for (i = 0; i < RTE_DIM(port_bucket_stats); i++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_port_bucket_stat,
+					.obj_idx = port,
+					.stat = port_bucket_types[i],
+					.mode = RTE_EVENT_DEV_XSTATS_PORT,
+					.extra_arg = bkt,
+				};
+				snprintf(sname, sizeof(sname),
+					"port_%u_%s_%u-%u",
+					port, port_bucket_stats[i],
+					(bkt << SW_DEQ_STAT_BUCKET_SHIFT) + 1,
+					(bkt + 1) << SW_DEQ_STAT_BUCKET_SHIFT);
+				stat++;
+			}
+		}
+	}
+
+	sw->xstats_count_mode_port = stat - sw->xstats_count_mode_dev;
+
+	for (qid = 0; qid < sw->qid_count; qid++) {
+		for (i = 0; i < RTE_DIM(qid_stats); i++, stat++) {
+			sw->xstats[stat] = (struct sw_xstats_entry){
+				.fn = get_qid_stat,
+				.obj_idx = qid,
+				.stat = qid_types[i],
+				.mode = RTE_EVENT_DEV_XSTATS_QUEUE,
+			};
+			snprintf(sname, sizeof(sname), "qid_%u_%s",
+					qid, qid_stats[i]);
+		}
+		for (iq = 0; iq < SW_IQS_MAX; iq++)
+			for (i = 0; i < RTE_DIM(qid_iq_stats); i++, stat++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_qid_iq_stat,
+					.obj_idx = qid,
+					.stat = qid_iq_types[i],
+					.mode = RTE_EVENT_DEV_XSTATS_QUEUE,
+					.extra_arg = iq
+				};
+				snprintf(sname, sizeof(sname),
+						"qid_%u_iq_%u_%s",
+						qid, iq,
+						qid_iq_stats[i]);
+			}
+
+		for (port = 0; port < sw->port_count; port++)
+			for (i = 0; i < RTE_DIM(qid_port_stats); i++, stat++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_qid_port_stat,
+					.obj_idx = qid,
+					.stat = qid_port_types[i],
+					.mode = RTE_EVENT_DEV_XSTATS_QUEUE,
+					.extra_arg = port
+				};
+				snprintf(sname, sizeof(sname),
+						"qid_%u_port_%u_%s",
+						qid, port,
+						qid_port_stats[i]);
+			}
+	}
+
+	sw->xstats_count_mode_queue = stat -
+		(sw->xstats_count_mode_dev + sw->xstats_count_mode_port);
+#undef sname
+
+	sw->xstats_count = stat;
+
+	return stat;
+}
+
+int
+sw_xstats_uninit(struct sw_evdev *sw)
+{
+	rte_free(sw->xstats);
+	sw->xstats_count = 0;
+	return 0;
+}
+
+int
+sw_xstats_get_names(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		struct rte_event_dev_xstats_name *xstats_names,
+		unsigned int size)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+	unsigned int xidx = 0;
+	RTE_SET_USED(mode);
+	RTE_SET_USED(queue_port_id);
+
+	uint32_t xstats_mode_count = 0;
+
+	switch (mode) {
+	case RTE_EVENT_DEV_XSTATS_DEVICE:
+		xstats_mode_count = sw->xstats_count_mode_dev;
+		break;
+	case RTE_EVENT_DEV_XSTATS_PORT:
+		xstats_mode_count = sw->xstats_count_mode_port;
+		break;
+	case RTE_EVENT_DEV_XSTATS_QUEUE:
+		xstats_mode_count = sw->xstats_count_mode_queue;
+		break;
+	default:
+		SW_LOG_ERR("Invalid mode recieved in sw_xstats_get_names()\n");
+		return -EINVAL;
+	};
+
+	if (xstats_mode_count > size)
+		return xstats_mode_count;
+
+	for (i = 0; i < sw->xstats_count && xidx < size; i++) {
+		if (sw->xstats[i].mode != mode)
+			continue;
+		xstats_names[xidx] = sw->xstats[i].name;
+		xidx++;
+	}
+	return xstats_mode_count;
+}
+
+int
+sw_xstats_get(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		const unsigned int ids[], uint64_t values[], unsigned int n)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+	unsigned int xidx = 0;
+	RTE_SET_USED(mode);
+	RTE_SET_USED(queue_port_id);
+
+	uint32_t xstats_mode_count = 0;
+
+	switch (mode) {
+	case RTE_EVENT_DEV_XSTATS_DEVICE:
+		xstats_mode_count = sw->xstats_count_mode_dev;
+		break;
+	case RTE_EVENT_DEV_XSTATS_PORT:
+		xstats_mode_count = sw->xstats_count_mode_port;
+		break;
+	case RTE_EVENT_DEV_XSTATS_QUEUE:
+		xstats_mode_count = sw->xstats_count_mode_queue;
+		break;
+	default:
+		SW_LOG_ERR("Invalid mode recieved in sw_xstats_get()\n");
+		return -EINVAL;
+	};
+
+	if (xstats_mode_count > n)
+		return xstats_mode_count;
+
+	for (i = 0; i < n && xidx < xstats_mode_count; i++) {
+		struct sw_xstats_entry *xs = &sw->xstats[ids[i]];
+		if (ids[i] > sw->xstats_count || xs->mode != mode)
+			continue;
+		values[xidx] = xs->fn(sw, xs->obj_idx, xs->stat, xs->extra_arg);
+		xidx++;
+	}
+
+	return xidx;
+}
+
+uint64_t
+sw_xstats_get_by_name(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+
+	for (i = 0; i < sw->xstats_count; i++) {
+		struct sw_xstats_entry *xs = &sw->xstats[i];
+		if (strncmp(xs->name.name, name,
+				RTE_EVENT_DEV_XSTATS_NAME_SIZE) == 0){
+			if (id != NULL)
+				*id = i;
+			return xs->fn(sw, xs->obj_idx, xs->stat, xs->extra_arg);
+		}
+	}
+	if (id != NULL)
+		*id = (uint32_t)-1;
+	return (uint64_t)-1;
+}
+
+int
+sw_xstats_reset(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t i;
+
+	/* instance stats */
+	sw->stats.rx_pkts = 0;
+	sw->stats.tx_pkts = 0;
+	sw->stats.rx_dropped = 0;
+	sw->sched_called = 0;
+	sw->sched_cq_qid_called = 0;
+	sw->sched_no_iq_enqueues = 0;
+	sw->sched_no_cq_enqueues = 0;
+
+	for (i = 0; i < sw->port_count; i++) {
+		struct sw_port *p = &sw->ports[i];
+		p->stats.rx_pkts = 0;
+		p->stats.tx_pkts = 0;
+		p->stats.rx_dropped = 0;
+		p->avg_pkt_ticks = 0;
+		p->total_polls = 0;
+		p->zero_polls = 0;
+
+		memset(p->poll_buckets, 0, sizeof(p->poll_buckets));
+	}
+
+	for (i = 0; i < sw->qid_count; i++) {
+		struct sw_qid *qid = &sw->qids[i];
+		qid->stats.rx_pkts = 0;
+		qid->stats.tx_pkts = 0;
+		qid->stats.rx_dropped = 0;
+	}
+
+	return 0;
+}
-- 
2.7.4

[dpdk-dev] [PATCH v3 17/17] app/test: add unit tests for SW eventdev driver

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Since the sw driver is a standalone lookaside device that has no HW
requirements, we can provide a set of unit tests that test its
functionality across the different queue types and with different input
scenarios.

This also adds the tests to be automatically run by autotest.py

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 app/test/Makefile           |    5 +-
 app/test/autotest_data.py   |   26 +
 app/test/test_eventdev_sw.c | 2249 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 2279 insertions(+), 1 deletion(-)
 create mode 100644 app/test/test_eventdev_sw.c

diff --git a/app/test/Makefile b/app/test/Makefile
index a426548..dc92d9c 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -197,7 +197,10 @@ SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_perf.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
 
-SRCS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += test_eventdev.c
+ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
+SRCS-y += test_eventdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += test_eventdev_sw.c
+endif
 
 SRCS-$(CONFIG_RTE_LIBRTE_KVARGS) += test_kvargs.c
 
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 0cd598b..165ed6c 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -346,6 +346,32 @@ def per_sockets(num):
 non_parallel_test_group_list = [
 
     {
+        "Prefix":    "eventdev",
+        "Memory":    "512",
+        "Tests":
+        [
+            {
+                "Name":    "Eventdev common autotest",
+                "Command": "eventdev_common_autotest",
+                "Func":    default_autotest,
+                "Report":  None,
+            },
+        ]
+    },
+    {
+        "Prefix":    "eventdev_sw",
+        "Memory":    "512",
+        "Tests":
+        [
+            {
+                "Name":    "Eventdev sw autotest",
+                "Command": "eventdev_sw_autotest",
+                "Func":    default_autotest,
+                "Report":  None,
+            },
+        ]
+    },
+    {
         "Prefix":    "kni",
         "Memory":    "512",
         "Tests":
diff --git a/app/test/test_eventdev_sw.c b/app/test/test_eventdev_sw.c
new file mode 100644
index 0000000..ef6a486
--- /dev/null
+++ b/app/test/test_eventdev_sw.c
@@ -0,0 +1,2249 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/queue.h>
+
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+
+#include <rte_eventdev.h>
+#include "test.h"
+
+#define MAX_PORTS 16
+#define MAX_QIDS 16
+#define NUM_PACKETS (1<<18)
+
+static int evdev;
+
+struct test {
+	struct rte_mempool *mbuf_pool;
+	uint8_t port[MAX_PORTS];
+	uint8_t qid[MAX_QIDS];
+	int nb_qids;
+};
+
+static struct rte_event release_ev = {.op = RTE_EVENT_OP_RELEASE };
+
+static inline struct rte_mbuf *
+rte_gen_arp(int portid, struct rte_mempool *mp)
+{
+	/*
+	 * len = 14 + 46
+	 * ARP, Request who-has 10.0.0.1 tell 10.0.0.2, length 46
+	 */
+	static const uint8_t arp_request[] = {
+		/*0x0000:*/ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xa8,
+		0x6b, 0xfd, 0x02, 0x29, 0x08, 0x06, 0x00, 0x01,
+		/*0x0010:*/ 0x08, 0x00, 0x06, 0x04, 0x00, 0x01, 0xec, 0xa8,
+		0x6b, 0xfd, 0x02, 0x29, 0x0a, 0x00, 0x00, 0x01,
+		/*0x0020:*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00,
+		0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		/*0x0030:*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00
+	};
+	struct rte_mbuf *m;
+	int pkt_len = sizeof(arp_request) - 1;
+
+	m = rte_pktmbuf_alloc(mp);
+	if (!m)
+		return 0;
+
+	memcpy((void *)((uintptr_t)m->buf_addr + m->data_off),
+		arp_request, pkt_len);
+	rte_pktmbuf_pkt_len(m) = pkt_len;
+	rte_pktmbuf_data_len(m) = pkt_len;
+
+	RTE_SET_USED(portid);
+
+	return m;
+}
+
+static void
+xstats_print(void)
+{
+#define XSTATS_MAX 1024
+		uint32_t i;
+		uint32_t ids[XSTATS_MAX];
+		uint64_t values[XSTATS_MAX];
+		struct rte_event_dev_xstats_name xstats_names[XSTATS_MAX];
+
+		for (i = 0; i < XSTATS_MAX; i++)
+			ids[i] = i;
+
+		/* Device names / values */
+		int ret = rte_event_dev_xstats_names_get(evdev,
+						RTE_EVENT_DEV_XSTATS_DEVICE,
+						0, xstats_names, XSTATS_MAX);
+		ret = rte_event_dev_xstats_get(evdev,
+						RTE_EVENT_DEV_XSTATS_DEVICE,
+						0, ids, values, XSTATS_MAX);
+		if (ret > XSTATS_MAX)
+			printf("%s %d: more xstats available than space\n",
+					__func__, __LINE__);
+		for (i = 0; (signed)i < ret; i++) {
+			printf("%d : %s : %ld\n",
+					i, xstats_names[i].name, values[i]);
+		}
+
+		/* Port names / values */
+		ret = rte_event_dev_xstats_names_get(evdev,
+						RTE_EVENT_DEV_XSTATS_PORT, 0,
+						xstats_names, XSTATS_MAX);
+		ret = rte_event_dev_xstats_get(evdev,
+						RTE_EVENT_DEV_XSTATS_PORT, 1,
+						ids, values, XSTATS_MAX);
+		if (ret > XSTATS_MAX)
+			printf("%s %d: more xstats available than space\n",
+					__func__, __LINE__);
+		for (i = 0; (signed)i < ret; i++) {
+			printf("%d : %s : %ld\n",
+					i, xstats_names[i].name, values[i]);
+		}
+
+		/* Queue names / values */
+		ret = rte_event_dev_xstats_names_get(evdev,
+						RTE_EVENT_DEV_XSTATS_QUEUE,
+						0, xstats_names, XSTATS_MAX);
+		ret = rte_event_dev_xstats_get(evdev,
+						RTE_EVENT_DEV_XSTATS_QUEUE,
+						1, ids, values, XSTATS_MAX);
+		if (ret > XSTATS_MAX)
+			printf("%s %d: more xstats available than space\n",
+					__func__, __LINE__);
+		for (i = 0; (signed)i < ret; i++) {
+			printf("%d : %s : %ld\n",
+					i, xstats_names[i].name, values[i]);
+		}
+}
+
+
+/* initialization and config */
+static inline int
+init(struct test *t, int nb_queues, int nb_ports)
+{
+	struct rte_event_dev_config config = {
+			.nb_event_queues = nb_queues,
+			.nb_event_ports = nb_ports,
+			.nb_event_queue_flows = 1024,
+			.nb_events_limit = 4096,
+			.nb_event_port_dequeue_depth = 128,
+			.nb_event_port_enqueue_depth = 128,
+	};
+	int ret;
+
+	void *temp = t->mbuf_pool; /* save and restore mbuf pool */
+
+	memset(t, 0, sizeof(*t));
+	t->mbuf_pool = temp;
+
+	ret = rte_event_dev_configure(evdev, &config);
+	if (ret < 0)
+		printf("%d: Error configuring device\n", __LINE__);
+	return ret;
+};
+
+static inline int
+create_ports(struct test *t, int num_ports)
+{
+	int i;
+	static const struct rte_event_port_conf conf = {
+			.new_event_threshold = 1024,
+			.dequeue_depth = 32,
+			.enqueue_depth = 64,
+	};
+	if (num_ports > MAX_PORTS)
+		return -1;
+
+	for (i = 0; i < num_ports; i++) {
+		if (rte_event_port_setup(evdev, i, &conf) < 0) {
+			printf("Error setting up port %d\n", i);
+			return -1;
+		}
+		t->port[i] = i;
+	}
+
+	return 0;
+}
+
+static inline int
+create_lb_qids(struct test *t, int num_qids, uint32_t flags)
+{
+	int i;
+
+	/* Q creation */
+	const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = flags,
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+	};
+
+	for (i = t->nb_qids; i < t->nb_qids + num_qids; i++) {
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+	}
+	t->nb_qids += num_qids;
+	if (t->nb_qids > MAX_QIDS)
+		return -1;
+
+	return 0;
+}
+
+static inline int
+create_atomic_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY);
+}
+
+static inline int
+create_ordered_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_ORDERED_ONLY);
+}
+
+
+static inline int
+create_unordered_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY);
+}
+
+static inline int
+create_directed_qids(struct test *t, int num_qids, const uint8_t ports[])
+{
+	int i;
+
+	/* Q creation */
+	static const struct rte_event_queue_conf conf = {
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_SINGLE_LINK,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+	};
+
+	for (i = t->nb_qids; i < t->nb_qids + num_qids; i++) {
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+
+		if (rte_event_port_link(evdev, ports[i - t->nb_qids],
+				&t->qid[i], NULL, 1) != 1) {
+			printf("%d: error creating link for qid %d\n",
+					__LINE__, i);
+			return -1;
+		}
+	}
+	t->nb_qids += num_qids;
+	if (t->nb_qids > MAX_QIDS)
+		return -1;
+
+	return 0;
+}
+
+/* destruction */
+static inline int
+cleanup(struct test *t __rte_unused)
+{
+	rte_event_dev_stop(evdev);
+	rte_event_dev_close(evdev);
+	return 0;
+};
+
+struct test_event_dev_stats {
+	uint64_t rx_pkts;       /**< Total packets received */
+	uint64_t rx_dropped;    /**< Total packets dropped (Eg Invalid QID) */
+	uint64_t tx_pkts;       /**< Total packets transmitted */
+
+	/** Packets received on this port */
+	uint64_t port_rx_pkts[MAX_PORTS];
+	/** Packets dropped on this port */
+	uint64_t port_rx_dropped[MAX_PORTS];
+	/** Packets inflight on this port */
+	uint64_t port_inflight[MAX_PORTS];
+	/** Packets transmitted on this port */
+	uint64_t port_tx_pkts[MAX_PORTS];
+	/** Packets received on this qid */
+	uint64_t qid_rx_pkts[MAX_QIDS];
+	/** Packets dropped on this qid */
+	uint64_t qid_rx_dropped[MAX_QIDS];
+	/** Packets transmitted on this qid */
+	uint64_t qid_tx_pkts[MAX_QIDS];
+};
+
+static inline int
+test_event_dev_stats_get(int dev_id, struct test_event_dev_stats *stats)
+{
+	static uint32_t i;
+	static uint32_t total_ids[3]; /* rx, tx and drop */
+	static uint32_t port_rx_pkts_ids[MAX_PORTS];
+	static uint32_t port_rx_dropped_ids[MAX_PORTS];
+	static uint32_t port_inflight_ids[MAX_PORTS];
+	static uint32_t port_tx_pkts_ids[MAX_PORTS];
+	static uint32_t qid_rx_pkts_ids[MAX_QIDS];
+	static uint32_t qid_rx_dropped_ids[MAX_QIDS];
+	static uint32_t qid_tx_pkts_ids[MAX_QIDS];
+
+
+	stats->rx_pkts = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_rx", &total_ids[0]);
+	stats->rx_dropped = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_drop", &total_ids[1]);
+	stats->tx_pkts = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_tx", &total_ids[2]);
+	for (i = 0; i < MAX_PORTS; i++) {
+		char name[32];
+		snprintf(name, sizeof(name), "port_%u_rx", i);
+		stats->port_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_rx_pkts_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_drop", i);
+		stats->port_rx_dropped[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_rx_dropped_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_inflight", i);
+		stats->port_inflight[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_inflight_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_tx", i);
+		stats->port_tx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_tx_pkts_ids[i]);
+	}
+	for (i = 0; i < MAX_QIDS; i++) {
+		char name[32];
+		snprintf(name, sizeof(name), "qid_%u_rx", i);
+		stats->qid_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_rx_pkts_ids[i]);
+		snprintf(name, sizeof(name), "qid_%u_drop", i);
+		stats->qid_rx_dropped[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_rx_dropped_ids[i]);
+		snprintf(name, sizeof(name), "qid_%u_tx", i);
+		stats->qid_tx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_tx_pkts_ids[i]);
+	}
+
+	return 0;
+}
+
+/* run_prio_packet_test
+ * This performs a basic packet priority check on the test instance passed in.
+ * It is factored out of the main priority tests as the same tests must be
+ * performed to ensure prioritization of each type of QID.
+ *
+ * Requirements:
+ *  - An initialized test structure, including mempool
+ *  - t->port[0] is initialized for both Enq / Deq of packets to the QID
+ *  - t->qid[0] is the QID to be tested
+ *  - if LB QID, the CQ must be mapped to the QID.
+ */
+static int
+run_prio_packet_test(struct test *t)
+{
+	int err;
+	const uint32_t MAGIC_SEQN[] = {4711, 1234};
+	const uint32_t PRIORITY[] = {3, 0};
+	unsigned int i;
+	for (i = 0; i < RTE_DIM(MAGIC_SEQN); i++) {
+		/* generate pkt and enqueue */
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->seqn = MAGIC_SEQN[i];
+
+		ev = (struct rte_event){
+			.priority = PRIORITY[i],
+			.op = RTE_EVENT_OP_NEW,
+			.queue_id = t->qid[0],
+			.mbuf = arp
+		};
+		err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err < 0) {
+			printf("%d: error failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: error failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_rx_pkts[t->port[0]] != 2) {
+		printf("%d: error stats incorrect for directed port\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	struct rte_event ev, ev2;
+	uint32_t deq_pkts;
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[0], &ev, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (ev.mbuf->seqn != MAGIC_SEQN[1]) {
+		printf("%d: first packet out not highest priority\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	rte_pktmbuf_free(ev.mbuf);
+
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[0], &ev2, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (ev2.mbuf->seqn != MAGIC_SEQN[0]) {
+		printf("%d: second packet out not lower priority\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	rte_pktmbuf_free(ev2.mbuf);
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+test_single_directed_packet(struct test *t)
+{
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 3 directed QIDs going to 3 ports */
+	if (init(t, 3, 3) < 0 ||
+			create_ports(t, 3) < 0 ||
+			create_directed_qids(t, 3, t->port) < 0)
+		return -1;
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+	struct rte_event ev = {
+			.op = RTE_EVENT_OP_NEW,
+			.queue_id = wrk_enq,
+			.mbuf = arp,
+	};
+
+	if (!arp) {
+		printf("%d: gen of pkt failed\n", __LINE__);
+		return -1;
+	}
+
+	const uint32_t MAGIC_SEQN = 4711;
+	arp->seqn = MAGIC_SEQN;
+
+	/* generate pkt and enqueue */
+	err = rte_event_enqueue_burst(evdev, rx_enq, &ev, 1);
+	if (err < 0) {
+		printf("%d: error failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	/* Run schedule() as dir packets may need to be re-ordered */
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: error failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_rx_pkts[rx_enq] != 1) {
+		printf("%d: error stats incorrect for directed port\n",
+				__LINE__);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+	deq_pkts = rte_event_dequeue_burst(evdev, wrk_enq, &ev, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_rx_pkts[wrk_enq] != 0 &&
+			stats.port_rx_pkts[wrk_enq] != 1) {
+		printf("%d: error directed stats post-dequeue\n", __LINE__);
+		return -1;
+	}
+
+	if (ev.mbuf->seqn != MAGIC_SEQN) {
+		printf("%d: error magic sequence number not dequeued\n",
+				__LINE__);
+		return -1;
+	}
+
+	rte_pktmbuf_free(ev.mbuf);
+	cleanup(t);
+	return 0;
+}
+
+
+static int
+test_priority_directed(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_directed_qids(t, 1, t->port) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_atomic(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_ordered(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_ordered_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_unordered(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_unordered_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+burst_packets(struct test *t)
+{
+	/************** CONFIG ****************/
+	uint32_t i;
+	int err;
+	int ret;
+
+	/* Create instance with 2 ports and 2 queues */
+	if (init(t, 2, 2) < 0 ||
+			create_ports(t, 2) < 0 ||
+			create_atomic_qids(t, 2) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	ret = rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1);
+	if (ret != 1) {
+		printf("%d: error mapping lb qid0\n", __LINE__);
+		return -1;
+	}
+	ret = rte_event_port_link(evdev, t->port[1], &t->qid[1], NULL, 1);
+	if (ret != 1) {
+		printf("%d: error mapping lb qid1\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	const uint32_t rx_port = 0;
+	const uint32_t NUM_PKTS = 2;
+
+	for (i = 0; i < NUM_PKTS; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: error generating pkt\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = i % 2,
+				.flow_id = i % 3,
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_port], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+	rte_event_schedule(evdev);
+
+	/* Check stats for all NUM_PKTS arrived to sched core */
+	struct test_event_dev_stats stats;
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+	if (stats.rx_pkts != NUM_PKTS || stats.tx_pkts != NUM_PKTS) {
+		printf("%d: Sched core didn't receive all %d pkts\n",
+				__LINE__, NUM_PKTS);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+	int p;
+
+	deq_pkts = 0;
+	/******** DEQ QID 1 *******/
+	do {
+		struct rte_event ev;
+		p = rte_event_dequeue_burst(evdev, t->port[0], &ev, 1, 0);
+		deq_pkts += p;
+		rte_pktmbuf_free(ev.mbuf);
+	} while (p);
+
+	if (deq_pkts != NUM_PKTS/2) {
+		printf("%d: Half of NUM_PKTS didn't arrive at port 1\n",
+				__LINE__);
+		return -1;
+	}
+
+	/******** DEQ QID 2 *******/
+	deq_pkts = 0;
+	do {
+		struct rte_event ev;
+		p = rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0);
+		deq_pkts += p;
+		rte_pktmbuf_free(ev.mbuf);
+	} while (p);
+	if (deq_pkts != NUM_PKTS/2) {
+		printf("%d: Half of NUM_PKTS didn't arrive at port 2\n",
+				__LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+abuse_inflights(struct test *t)
+{
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* Enqueue op only */
+	err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &release_ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.rx_pkts != 0 ||
+			stats.tx_pkts != 0 ||
+			stats.port_inflight[wrk_enq] != 0) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+xstats_tests(struct test *t)
+{
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* Enqueue op only */
+	err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &release_ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+#define XSTATS_MAX 1024
+	uint32_t i;
+	uint32_t ids[XSTATS_MAX];
+	uint64_t values[XSTATS_MAX];
+	struct rte_event_dev_xstats_name xstats_names[XSTATS_MAX];
+
+	for (i = 0; i < XSTATS_MAX; i++)
+		ids[i] = i;
+
+	/* Device names / values */
+	int ret = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, xstats_names, XSTATS_MAX);
+	if (ret != 6) {
+		printf("%d: expected 6 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, ids, values, XSTATS_MAX);
+	if (ret != 6) {
+		printf("%d: expected 6 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	/* Port names / values */
+	ret = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT, 0,
+					xstats_names, XSTATS_MAX);
+	if (ret != 84) {
+		printf("%d: expected 84 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT, 1,
+					ids, values, XSTATS_MAX);
+	if (ret != 84) {
+		printf("%d: expected 84 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	/* Queue names / values */
+	ret = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE,
+					0, xstats_names, XSTATS_MAX);
+	if (ret != 13) {
+		printf("%d: expected 13 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE,
+					1, ids, values, XSTATS_MAX);
+	if (ret != 13) {
+		printf("%d: expected 13 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+qid_priorities(struct test *t)
+{
+	/* Test works by having a CQ with enough empty space for all packets,
+	 * and enqueueing 3 packets to 3 QIDs. They must return based on the
+	 * priority of the QID, not the ingress order, to pass the test
+	 */
+	unsigned int i;
+	/* Create instance with 1 ports, and 3 qids */
+	if (init(t, 3, 1) < 0 ||
+			create_ports(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	for (i = 0; i < 3; i++) {
+		/* Create QID */
+		const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+			/* increase priority (0 == highest), as we go */
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL - i,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+		};
+
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+	}
+	t->nb_qids = i;
+	/* map all QIDs to port */
+	rte_event_port_link(evdev, t->port[0], NULL, NULL, 0);
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* enqueue 3 packets, setting seqn and QID to check priority */
+	for (i = 0; i < 3; i++) {
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		ev.queue_id = t->qid[i];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		arp->seqn = i;
+
+		int err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	/* dequeue packets, verify priority was upheld */
+	struct rte_event ev[32];
+	uint32_t deq_pkts =
+		rte_event_dequeue_burst(evdev, t->port[0], ev, 32, 0);
+	if (deq_pkts != 3) {
+		printf("%d: failed to deq packets\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	for (i = 0; i < 3; i++) {
+		if (ev[i].mbuf->seqn != 2-i) {
+			printf(
+				"%d: qid priority test: seqn %d incorrectly prioritized\n",
+					__LINE__, i);
+		}
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+load_balancing(struct test *t)
+{
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	for (i = 0; i < 3; i++) {
+		/* map port 1 - 3 inclusive */
+		if (rte_event_port_link(evdev, t->port[i+1], &t->qid[0],
+				NULL, 1) != 1) {
+			printf("%d: error mapping qid to port %d\n",
+					__LINE__, i);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	/*
+	 * Create a set of flows that test the load-balancing operation of the
+	 * implementation. Fill CQ 0 and 1 with flows 0 and 1, and test
+	 * with a new flow, which should be sent to the 3rd mapped CQ
+	 */
+	static uint32_t flows[] = {0, 1, 1, 0, 0, 2, 2, 0, 2};
+
+	for (i = 0; i < RTE_DIM(flows); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.flow_id = flows[i],
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_inflight[1] != 4) {
+		printf("%d:%s: port 1 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+	if (stats.port_inflight[2] != 2) {
+		printf("%d:%s: port 2 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+	if (stats.port_inflight[3] != 3) {
+		printf("%d:%s: port 3 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+load_balancing_history(struct test *t)
+{
+	struct test_event_dev_stats stats = {0};
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	/* Create instance with 1 atomic QID going to 3 ports + 1 prod port */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0)
+		return -1;
+
+	/* CQ mapping to QID */
+	if (rte_event_port_link(evdev, t->port[1], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 1 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_port_link(evdev, t->port[2], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 2 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_port_link(evdev, t->port[3], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 3 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Create a set of flows that test the load-balancing operation of the
+	 * implementation. Fill CQ 0, 1 and 2 with flows 0, 1 and 2, drop
+	 * the packet from CQ 0, send in a new set of flows. Ensure that:
+	 *  1. The new flow 3 gets into the empty CQ0
+	 *  2. packets for existing flow gets added into CQ1
+	 *  3. Next flow 0 pkt is now onto CQ2, since CQ0 and CQ1 now contain
+	 *     more outstanding pkts
+	 *
+	 *  This test makes sure that when a flow ends (i.e. all packets
+	 *  have been completed for that flow), that the flow can be moved
+	 *  to a different CQ when new packets come in for that flow.
+	 */
+	static uint32_t flows1[] = {0, 1, 1, 2};
+
+	for (i = 0; i < RTE_DIM(flows1); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		struct rte_event ev = {
+				.flow_id = flows1[i],
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.event_type = RTE_EVENT_TYPE_CPU,
+				.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+				.mbuf = arp
+		};
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->hash.rss = flows1[i];
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	/* Dequeue the flow 0 packet from port 1, so that we can then drop */
+	struct rte_event ev;
+	if (!rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0)) {
+		printf("%d: failed to dequeue\n", __LINE__);
+		return -1;
+	}
+	if (ev.mbuf->hash.rss != flows1[0]) {
+		printf("%d: unexpected flow received\n", __LINE__);
+		return -1;
+	}
+
+	/* drop the flow 0 packet from port 1 */
+	rte_event_enqueue_burst(evdev, t->port[1], &release_ev, 1);
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	/*
+	 * Set up the next set of flows, first a new flow to fill up
+	 * CQ 0, so that the next flow 0 packet should go to CQ2
+	 */
+	static uint32_t flows2[] = { 3, 3, 3, 1, 1, 0 };
+
+	for (i = 0; i < RTE_DIM(flows2); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		struct rte_event ev = {
+				.flow_id = flows2[i],
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.event_type = RTE_EVENT_TYPE_CPU,
+				.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+				.mbuf = arp
+		};
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->hash.rss = flows2[i];
+
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d:failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Now check the resulting inflights on each port.
+	 */
+	if (stats.port_inflight[1] != 3) {
+		printf("%d:%s: port 1 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+	if (stats.port_inflight[2] != 4) {
+		printf("%d:%s: port 2 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+	if (stats.port_inflight[3] != 2) {
+		printf("%d:%s: port 3 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+
+	for (i = 1; i <= 3; i++) {
+		struct rte_event ev;
+		while (rte_event_dequeue_burst(evdev, i, &ev, 1, 0))
+			rte_event_enqueue_burst(evdev, i, &release_ev, 1);
+	}
+	rte_event_schedule(evdev);
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+invalid_qid(struct test *t)
+{
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	for (i = 0; i < 4; i++) {
+		err = rte_event_port_link(evdev, t->port[i], &t->qid[0],
+				NULL, 1);
+		if (err != 1) {
+			printf("%d: error mapping port 1 qid\n", __LINE__);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Send in a packet with an invalid qid to the scheduler.
+	 * We should see the packed enqueued OK, but the inflights for
+	 * that packet should not be incremented, and the rx_dropped
+	 * should be incremented.
+	 */
+	static uint32_t flows1[] = {20};
+
+	for (i = 0; i < RTE_DIM(flows1); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0] + flows1[i],
+				.flow_id = i,
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Now check the resulting inflights on the port, and the rx_dropped.
+	 */
+	if (stats.port_inflight[0] != 0) {
+		printf("%d:%s: port 1 inflight count not correct\n", __LINE__,
+				__func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (stats.port_rx_dropped[0] != 1) {
+		printf("%d:%s: port 1 drops\n", __LINE__, __func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	/* each packet drop should only be counted in one place - port or dev */
+	if (stats.rx_dropped != 0) {
+		printf("%d:%s: port 1 dropped count not correct\n", __LINE__,
+				__func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+single_packet(struct test *t)
+{
+	const uint32_t MAGIC_SEQN = 7321;
+	struct rte_event ev;
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** Gen pkt and enqueue ****************/
+	struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+	if (!arp) {
+		printf("%d: gen of pkt failed\n", __LINE__);
+		return -1;
+	}
+
+	ev.op = RTE_EVENT_OP_NEW;
+	ev.priority = RTE_EVENT_DEV_PRIORITY_NORMAL;
+	ev.mbuf = arp;
+	ev.queue_id = 0;
+	ev.flow_id = 3;
+	arp->seqn = MAGIC_SEQN;
+
+	err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.rx_pkts != 1 ||
+			stats.tx_pkts != 1 ||
+			stats.port_inflight[wrk_enq] != 1) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[wrk_enq], &ev, 1, 0);
+	if (deq_pkts < 1) {
+		printf("%d: Failed to deq\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (ev.mbuf->seqn != MAGIC_SEQN) {
+		printf("%d: magic sequence number not dequeued\n", __LINE__);
+		return -1;
+	}
+
+	rte_pktmbuf_free(ev.mbuf);
+	err = rte_event_enqueue_burst(evdev, t->port[wrk_enq], &release_ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[wrk_enq] != 0) {
+		printf("%d: port inflight not correct\n", __LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+inflight_counts(struct test *t)
+{
+	struct rte_event ev;
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	const int p1 = 1;
+	const int p2 = 2;
+	int err;
+	int i;
+
+	/* Create instance with 4 ports */
+	if (init(t, 2, 3) < 0 ||
+			create_ports(t, 3) < 0 ||
+			create_atomic_qids(t, 2) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[p1], &t->qid[0], NULL, 1);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+	err = rte_event_port_link(evdev, t->port[p2], &t->qid[1], NULL, 1);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+#define QID1_NUM 5
+	for (i = 0; i < QID1_NUM; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			goto err;
+		}
+
+		ev.queue_id =  t->qid[0];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			goto err;
+		}
+	}
+#define QID2_NUM 3
+	for (i = 0; i < QID2_NUM; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			goto err;
+		}
+		ev.queue_id =  t->qid[1];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			goto err;
+		}
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		goto err;
+	}
+
+	if (stats.rx_pkts != QID1_NUM + QID2_NUM ||
+			stats.tx_pkts != QID1_NUM + QID2_NUM) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		goto err;
+	}
+
+	if (stats.port_inflight[p1] != QID1_NUM) {
+		printf("%d: %s port 1 inflight not correct\n", __LINE__,
+				__func__);
+		goto err;
+	}
+	if (stats.port_inflight[p2] != QID2_NUM) {
+		printf("%d: %s port 2 inflight not correct\n", __LINE__,
+				__func__);
+		goto err;
+	}
+
+	/************** DEQUEUE INFLIGHT COUNT CHECKS  ****************/
+	/* port 1 */
+	struct rte_event events[QID1_NUM + QID2_NUM];
+	uint32_t deq_pkts = rte_event_dequeue_burst(evdev, t->port[p1], events,
+			RTE_DIM(events), 0);
+
+	if (deq_pkts != QID1_NUM) {
+		printf("%d: Port 1: DEQUEUE inflight failed\n", __LINE__);
+		goto err;
+	}
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p1] != QID1_NUM) {
+		printf("%d: port 1 inflight decrement after DEQ != 0\n",
+				__LINE__);
+		goto err;
+	}
+	for (i = 0; i < QID1_NUM; i++) {
+		err = rte_event_enqueue_burst(evdev, t->port[p1], &release_ev,
+				1);
+		if (err != 1) {
+			printf("%d: %s rte enqueue of inf release failed\n",
+				__LINE__, __func__);
+			goto err;
+		}
+	}
+
+	/*
+	 * As the scheduler core decrements inflights, it needs to run to
+	 * process packets to act on the drop messages
+	 */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p1] != 0) {
+		printf("%d: port 1 inflight NON NULL after DROP\n", __LINE__);
+		goto err;
+	}
+
+	/* port2 */
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[p2], events,
+			RTE_DIM(events), 0);
+	if (deq_pkts != QID2_NUM) {
+		printf("%d: Port 2: DEQUEUE inflight failed\n", __LINE__);
+		goto err;
+	}
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p2] != QID2_NUM) {
+		printf("%d: port 1 inflight decrement after DEQ != 0\n",
+				__LINE__);
+		goto err;
+	}
+	for (i = 0; i < QID2_NUM; i++) {
+		err = rte_event_enqueue_burst(evdev, t->port[p2], &release_ev,
+				1);
+		if (err != 1) {
+			printf("%d: %s rte enqueue of inf release failed\n",
+				__LINE__, __func__);
+			goto err;
+		}
+	}
+
+	/*
+	 * As the scheduler core decrements inflights, it needs to run to
+	 * process packets to act on the drop messages
+	 */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p2] != 0) {
+		printf("%d: port 2 inflight NON NULL after DROP\n", __LINE__);
+		goto err;
+	}
+	cleanup(t);
+	return 0;
+
+err:
+	rte_event_dev_dump(evdev, stdout);
+	cleanup(t);
+	return -1;
+}
+
+static int
+parallel_basic(struct test *t, int check_order)
+{
+	const uint8_t rx_port = 0;
+	const uint8_t w1_port = 1;
+	const uint8_t w3_port = 3;
+	const uint8_t tx_port = 4;
+	int err;
+	int i;
+	uint32_t deq_pkts, j;
+	struct rte_mbuf *mbufs[3];
+	struct rte_mbuf *mbufs_out[3];
+	const uint32_t MAGIC_SEQN = 1234;
+
+	/* Create instance with 4 ports */
+	if (init(t, 2, tx_port + 1) < 0 ||
+			create_ports(t, tx_port + 1) < 0 ||
+			(check_order ?  create_ordered_qids(t, 1) :
+				create_unordered_qids(t, 1)) < 0 ||
+			create_directed_qids(t, 1, &tx_port)) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * CQ mapping to QID
+	 * We need three ports, all mapped to the same ordered qid0. Then we'll
+	 * take a packet out to each port, re-enqueue in reverse order,
+	 * then make sure the reordering has taken place properly when we
+	 * dequeue from the tx_port.
+	 *
+	 * Simplified test setup diagram:
+	 *
+	 * rx_port        w1_port
+	 *        \     /         \
+	 *         qid0 - w2_port - qid1
+	 *              \         /     \
+	 *                w3_port        tx_port
+	 */
+	/* CQ mapping to QID for LB ports (directed mapped on create) */
+	for (i = w1_port; i <= w3_port; i++) {
+		err = rte_event_port_link(evdev, t->port[i], &t->qid[0], NULL,
+				1);
+		if (err != 1) {
+			printf("%d: error mapping lb qid\n", __LINE__);
+			cleanup(t);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* Enqueue 3 packets to the rx port */
+	for (i = 0; i < 3; i++) {
+		struct rte_event ev;
+		mbufs[i] = rte_gen_arp(0, t->mbuf_pool);
+		if (!mbufs[i]) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		ev.queue_id = t->qid[0];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = mbufs[i];
+		mbufs[i]->seqn = MAGIC_SEQN + i;
+
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_port], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue pkt %u, retval = %u\n",
+					__LINE__, i, err);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	/* use extra slot to make logic in loops easier */
+	struct rte_event deq_ev[w3_port + 1];
+
+	/* Dequeue the 3 packets, one from each worker port */
+	for (i = w1_port; i <= w3_port; i++) {
+		deq_pkts = rte_event_dequeue_burst(evdev, t->port[i],
+				&deq_ev[i], 1, 0);
+		if (deq_pkts != 1) {
+			printf("%d: Failed to deq\n", __LINE__);
+			rte_event_dev_dump(evdev, stdout);
+			return -1;
+		}
+	}
+
+	/* Enqueue each packet in reverse order, flushing after each one */
+	for (i = w3_port; i >= w1_port; i--) {
+
+		deq_ev[i].op = RTE_EVENT_OP_FORWARD;
+		deq_ev[i].queue_id = t->qid[1];
+		err = rte_event_enqueue_burst(evdev, t->port[i], &deq_ev[i], 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+	rte_event_schedule(evdev);
+
+	/* dequeue from the tx ports, we should get 3 packets */
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[tx_port], deq_ev,
+			3, 0);
+
+	/* Check to see if we've got all 3 packets */
+	if (deq_pkts != 3) {
+		printf("%d: expected 3 pkts at tx port got %d from port %d\n",
+			__LINE__, deq_pkts, tx_port);
+		rte_event_dev_dump(evdev, stdout);
+		return 1;
+	}
+
+	/* Check to see if the sequence numbers are in expected order */
+	if (check_order) {
+		for (j = 0 ; j < deq_pkts ; j++) {
+			if (deq_ev[j].mbuf->seqn != MAGIC_SEQN + j) {
+				printf(
+					"%d: Incorrect sequence number(%d) from port %d\n",
+					__LINE__, mbufs_out[j]->seqn, tx_port);
+				return -1;
+			}
+		}
+	}
+
+	/* Destroy the instance */
+	cleanup(t);
+	return 0;
+}
+
+static int
+ordered_basic(struct test *t)
+{
+	return parallel_basic(t, 1);
+}
+
+static int
+unordered_basic(struct test *t)
+{
+	return parallel_basic(t, 0);
+}
+
+static int
+holb(struct test *t) /* test to check we avoid basic head-of-line blocking */
+{
+	const struct rte_event new_ev = {
+			.op = RTE_EVENT_OP_NEW
+			/* all other fields zero */
+	};
+	struct rte_event ev = new_ev;
+	unsigned int rx_port = 0; /* port we get the first flow on */
+	char rx_port_used_stat[64];
+	char rx_port_free_stat[64];
+	char other_port_used_stat[64];
+
+	if (init(t, 1, 2) < 0 ||
+			create_ports(t, 2) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+	int nb_links = rte_event_port_link(evdev, t->port[1], NULL, NULL, 0);
+	if (rte_event_port_link(evdev, t->port[0], NULL, NULL, 0) != 1 ||
+			nb_links != 1) {
+		printf("%d: Error links queue to ports\n", __LINE__);
+		goto err;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		goto err;
+	}
+
+	/* send one packet and see where it goes, port 0 or 1 */
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error doing first enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	if (rte_event_dev_xstats_by_name_get(evdev, "port_0_cq_ring_used", NULL)
+			!= 1)
+		rx_port = 1;
+
+	snprintf(rx_port_used_stat, sizeof(rx_port_used_stat),
+			"port_%u_cq_ring_used", rx_port);
+	snprintf(rx_port_free_stat, sizeof(rx_port_free_stat),
+			"port_%u_cq_ring_free", rx_port);
+	snprintf(other_port_used_stat, sizeof(other_port_used_stat),
+			"port_%u_cq_ring_used", rx_port ^ 1);
+	if (rte_event_dev_xstats_by_name_get(evdev, rx_port_used_stat, NULL)
+			!= 1) {
+		printf("%d: Error, first event not scheduled\n", __LINE__);
+		goto err;
+	}
+
+	/* now fill up the rx port's queue with one flow to cause HOLB */
+	do {
+		ev = new_ev;
+		if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+			printf("%d: Error with enqueue\n", __LINE__);
+			goto err;
+		}
+		rte_event_schedule(evdev);
+	} while (rte_event_dev_xstats_by_name_get(evdev,
+				rx_port_free_stat, NULL) != 0);
+
+	/* one more packet, which needs to stay in IQ - i.e. HOLB */
+	ev = new_ev;
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error with enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	/* check that the other port still has an empty CQ */
+	if (rte_event_dev_xstats_by_name_get(evdev, other_port_used_stat, NULL)
+			!= 0) {
+		printf("%d: Error, second port CQ is not empty\n", __LINE__);
+		goto err;
+	}
+	/* check IQ now has one packet */
+	if (rte_event_dev_xstats_by_name_get(evdev, "qid_0_iq_0_used", NULL)
+			!= 1) {
+		printf("%d: Error, QID does not have exactly 1 packet\n",
+			__LINE__);
+		goto err;
+	}
+
+	/* send another flow, which should pass the other IQ entry */
+	ev = new_ev;
+	ev.flow_id = 1;
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error with enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	if (rte_event_dev_xstats_by_name_get(evdev, other_port_used_stat, NULL)
+			!= 1) {
+		printf("%d: Error, second flow did not pass out first\n",
+			__LINE__);
+		goto err;
+	}
+
+	if (rte_event_dev_xstats_by_name_get(evdev, "qid_0_iq_0_used", NULL)
+			!= 1) {
+		printf("%d: Error, QID does not have exactly 1 packet\n",
+			__LINE__);
+		goto err;
+	}
+	cleanup(t);
+	return 0;
+err:
+	rte_event_dev_dump(evdev, stdout);
+	cleanup(t);
+	return -1;
+}
+
+static int
+worker_loopback_worker_fn(void *arg)
+{
+	struct test *t = arg;
+	uint8_t port = t->port[1];
+	int count = 0;
+	int enqd;
+
+	/*
+	 * Takes packets from the input port and then loops them back through
+	 * the Eventdev. Each packet gets looped through QIDs 0-8, 16 times
+	 * so each packet goes through 8*16 = 128 times.
+	 */
+	printf("%d: \tWorker function started\n", __LINE__);
+	while (count < NUM_PACKETS) {
+#define BURST_SIZE 32
+		struct rte_event ev[BURST_SIZE];
+		uint16_t i, nb_rx = rte_event_dequeue_burst(evdev, port, ev,
+				BURST_SIZE, 0);
+		if (nb_rx == 0) {
+			rte_pause();
+			continue;
+		}
+
+		for (i = 0; i < nb_rx; i++) {
+			ev[i].queue_id++;
+			if (ev[i].queue_id != 8) {
+				ev[i].op = RTE_EVENT_OP_FORWARD;
+				enqd = rte_event_enqueue_burst(evdev, port,
+						&ev[i], 1);
+				if (enqd != 1) {
+					printf("%d: Can't enqueue FWD!!\n",
+							__LINE__);
+					return -1;
+				}
+				continue;
+			}
+
+			ev[i].queue_id = 0;
+			ev[i].mbuf->udata64++;
+			if (ev[i].mbuf->udata64 != 16) {
+				ev[i].op = RTE_EVENT_OP_FORWARD;
+				enqd = rte_event_enqueue_burst(evdev, port,
+						&ev[i], 1);
+				if (enqd != 1) {
+					printf("%d: Can't enqueue FWD!!\n",
+							__LINE__);
+					return -1;
+				}
+				continue;
+			}
+			/* we have hit 16 iterations through system - drop */
+			rte_pktmbuf_free(ev[i].mbuf);
+			count++;
+			ev[i].op = RTE_EVENT_OP_RELEASE;
+			enqd = rte_event_enqueue_burst(evdev, port, &ev[i], 1);
+			if (enqd != 1) {
+				printf("%d drop enqueue failed\n", __LINE__);
+				return -1;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int
+worker_loopback_producer_fn(void *arg)
+{
+	struct test *t = arg;
+	uint8_t port = t->port[0];
+	uint64_t count = 0;
+
+	printf("%d: \tProducer function started\n", __LINE__);
+	while (count < NUM_PACKETS) {
+		struct rte_mbuf *m = 0;
+		do {
+			m = rte_pktmbuf_alloc(t->mbuf_pool);
+		} while (m == NULL);
+
+		m->udata64 = 0;
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.flow_id = (uintptr_t)m & 0xFFFF,
+				.mbuf = m,
+		};
+
+		if (rte_event_enqueue_burst(evdev, port, &ev, 1) != 1) {
+			while (rte_event_enqueue_burst(evdev, port, &ev, 1) !=
+					1)
+				rte_pause();
+		}
+
+		count++;
+	}
+
+	return 0;
+}
+
+static int
+worker_loopback(struct test *t)
+{
+	/* use a single producer core, and a worker core to see what happens
+	 * if the worker loops packets back multiple times
+	 */
+	struct test_event_dev_stats stats;
+	uint64_t print_cycles = 0, cycles = 0;
+	uint64_t tx_pkts = 0;
+	int err;
+	int w_lcore, p_lcore;
+
+	if (init(t, 8, 2) < 0 ||
+			create_atomic_qids(t, 8) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* RX with low max events */
+	static struct rte_event_port_conf conf = {
+			.dequeue_depth = 32,
+			.enqueue_depth = 64,
+	};
+	/* beware: this cannot be initialized in the static above as it would
+	 * only be initialized once - and this needs to be set for multiple runs
+	 */
+	conf.new_event_threshold = 512;
+
+	if (rte_event_port_setup(evdev, 0, &conf) < 0) {
+		printf("Error setting up RX port\n");
+		return -1;
+	}
+	t->port[0] = 0;
+	/* TX with higher max events */
+	conf.new_event_threshold = 4096;
+	if (rte_event_port_setup(evdev, 1, &conf) < 0) {
+		printf("Error setting up TX port\n");
+		return -1;
+	}
+	t->port[1] = 1;
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[1], NULL, NULL, 0);
+	if (err != 8) { /* should have mapped all queues*/
+		printf("%d: error mapping port 2 to all qids\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	p_lcore = rte_get_next_lcore(
+			/* start core */ -1,
+			/* skip master */ 1,
+			/* wrap */ 0);
+	w_lcore = rte_get_next_lcore(p_lcore, 1, 0);
+
+	rte_eal_remote_launch(worker_loopback_producer_fn, t, p_lcore);
+	rte_eal_remote_launch(worker_loopback_worker_fn, t, w_lcore);
+
+	print_cycles = cycles = rte_get_timer_cycles();
+	while (rte_eal_get_lcore_state(p_lcore) != FINISHED ||
+			rte_eal_get_lcore_state(w_lcore) != FINISHED) {
+
+		rte_event_schedule(evdev);
+
+		uint64_t new_cycles = rte_get_timer_cycles();
+
+		if (new_cycles - print_cycles > rte_get_timer_hz()) {
+			test_event_dev_stats_get(evdev, &stats);
+			printf(
+				"%d: \tSched Rx = %"PRIu64", Tx = %"PRIu64"\n",
+				__LINE__, stats.rx_pkts, stats.tx_pkts);
+
+			print_cycles = new_cycles;
+		}
+		if (new_cycles - cycles > rte_get_timer_hz() * 3) {
+			test_event_dev_stats_get(evdev, &stats);
+			if (stats.tx_pkts == tx_pkts) {
+				rte_event_dev_dump(evdev, stdout);
+				printf("Dumping xstats:\n");
+				xstats_print();
+				printf(
+					"%d: No schedules for seconds, deadlock\n",
+					__LINE__);
+				return -1;
+			}
+			tx_pkts = stats.tx_pkts;
+			cycles = new_cycles;
+		}
+	}
+	rte_event_schedule(evdev); /* ensure all completions are flushed */
+
+	rte_eal_mp_wait_lcore();
+
+	cleanup(t);
+	return 0;
+}
+
+static struct rte_mempool *eventdev_func_mempool;
+
+static int
+test_sw_eventdev(void)
+{
+	struct test *t = malloc(sizeof(struct test));
+	int ret;
+
+	const char *eventdev_name = "event_sw0";
+	evdev = rte_event_dev_get_dev_id(eventdev_name);
+	if (evdev < 0) {
+		printf("%d: Eventdev %s not found - creating.\n",
+				__LINE__, eventdev_name);
+		if (rte_eal_vdev_init(eventdev_name, NULL) < 0) {
+			printf("Error creating eventdev\n");
+			return -1;
+		}
+		evdev = rte_event_dev_get_dev_id(eventdev_name);
+		if (evdev < 0) {
+			printf("Error finding newly created eventdev\n");
+			return -1;
+		}
+	}
+
+	/* Only create mbuf pool once, reuse for each test run */
+	if (!eventdev_func_mempool) {
+		eventdev_func_mempool = rte_pktmbuf_pool_create(
+				"EVENTDEV_SW_SA_MBUF_POOL",
+				(1<<12), /* 4k buffers */
+				32 /*MBUF_CACHE_SIZE*/,
+				0,
+				512, /* use very small mbufs */
+				rte_socket_id());
+		if (!eventdev_func_mempool) {
+			printf("ERROR creating mempool\n");
+			return -1;
+		}
+	}
+	t->mbuf_pool = eventdev_func_mempool;
+
+	printf("*** Running Single Directed Packet test...\n");
+	ret = test_single_directed_packet(t);
+	if (ret != 0) {
+		printf("ERROR - Single Directed Packet test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Single Load Balanced Packet test...\n");
+	ret = single_packet(t);
+	if (ret != 0) {
+		printf("ERROR - Single Packet test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Unordered Basic test...\n");
+	ret = unordered_basic(t);
+	if (ret != 0) {
+		printf("ERROR -  Unordered Basic test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Ordered Basic test...\n");
+	ret = ordered_basic(t);
+	if (ret != 0) {
+		printf("ERROR -  Ordered Basic test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Burst Packets test...\n");
+	ret = burst_packets(t);
+	if (ret != 0) {
+		printf("ERROR - Burst Packets test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Load Balancing test...\n");
+	ret = load_balancing(t);
+	if (ret != 0) {
+		printf("ERROR - Load Balancing test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Directed test...\n");
+	ret = test_priority_directed(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Directed test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Atomic test...\n");
+	ret = test_priority_atomic(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Atomic test FAILED.\n");
+		return ret;
+	}
+
+	printf("*** Running Prioritized Ordered test...\n");
+	ret = test_priority_ordered(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Ordered test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Unordered test...\n");
+	ret = test_priority_unordered(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Unordered test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Invalid QID test...\n");
+	ret = invalid_qid(t);
+	if (ret != 0) {
+		printf("ERROR - Invalid QID test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Load Balancing History test...\n");
+	ret = load_balancing_history(t);
+	if (ret != 0) {
+		printf("ERROR - Load Balancing History test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Inflight Count test...\n");
+	ret = inflight_counts(t);
+	if (ret != 0) {
+		printf("ERROR - Inflight Count test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Abuse Inflights test...\n");
+	ret = abuse_inflights(t);
+	if (ret != 0) {
+		printf("ERROR - Abuse Inflights test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running XStats test...\n");
+	ret = xstats_tests(t);
+	if (ret != 0) {
+		printf("ERROR - XStats test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running QID Priority test...\n");
+	ret = qid_priorities(t);
+	if (ret != 0) {
+		printf("ERROR - QID Priority test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Head-of-line-blocking test...\n");
+	ret = holb(t);
+	if (ret != 0) {
+		printf("ERROR - Head-of-line-blocking test FAILED.\n");
+		return ret;
+	}
+	if (rte_lcore_count() >= 3) {
+		printf("*** Running Worker loopback test...\n");
+		ret = worker_loopback(t);
+		if (ret != 0) {
+			printf("ERROR - Worker loopback test FAILED.\n");
+			return ret;
+		}
+	} else {
+		printf("### Not enough cores for worker loopback test.\n");
+		printf("### Need at least 3 cores for test.\n");
+	}
+	/*
+	 * Free test instance, leaving mempool initialized, and a pointer to it
+	 * in static eventdev_func_mempool, as it is re-used on re-runs
+	 */
+	free(t);
+
+	return 0;
+}
+
+REGISTER_TEST_COMMAND(eventdev_sw_autotest, test_sw_eventdev);
-- 
2.7.4

[dpdk-dev] [PATCH v4 00/17] next-eventdev: event/sw software eventdev

[Harry van Haaren]

The following patchset adds software eventdev implementation
to the next-eventdev tree.

Note that certain tests in this patchset require the queue overriding
patch to pass, but it is not a build-time dependency.

The main change is the reworked xstats_reset() API, which now includes
a "mode" to select the Device, Port or Queue to reset.

This implementation is based on the previous software eventdev
v3 patchset, now with comments addressed:

1) use NULL in test link() functions (Jerin)
2) add CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n to config/common_base (Jerin)
3) xstats_names_get() return values improved
4) Fix event/sw bug in re-configuration of ports
5) Rework QUEUE_CFG_DEFAULT overriding of queue type at eventdev layer
6) Improve port unlinking to use optimized pull_port() if possible
7) Fix leak of credits on re-configuration of the device after usage
8) Improved error handling of unsupported queue types
9) Allow more flexible re-configuration of ports (lb and single-link changes)
10) Handle reconfiguring of ordered queues multiple times without errors


Git log is clean, while checkpatch issues:
2 Errors on Complex Macro (which I beleive cannot be fixed)
4 Warnings in the scheduler logic, which reduce readability when fixed.
1 Else after return warning, which cannot be easily removed

This patchset contains the work of multiple developers,
please see signoffs on each patch.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>


Bruce Richardson (14):
  eventdev: add APIs for extended stats
  event/sw: add new software-only eventdev driver
  event/sw: add device capabilities function
  event/sw: add configure function
  event/sw: add fns to return default port/queue config
  event/sw: add support for event queues
  event/sw: add support for event ports
  event/sw: add support for linking queues to ports
  event/sw: add worker core functions
  event/sw: add scheduling logic
  event/sw: add start stop and close functions
  event/sw: add dump function for easier debugging
  event/sw: add xstats support
  app/test: add unit tests for SW eventdev driver

Harry van Haaren (3):
  eventdev: increase size of enq deq conf variables
  app/test: eventdev link all queues before start
  test/eventdev: rework timeout ticks test

 app/test/Makefile                             |    5 +-
 app/test/autotest_data.py                     |   26 +
 app/test/test_eventdev.c                      |   12 +-
 app/test/test_eventdev_sw.c                   | 3179 +++++++++++++++++++++++++
 config/common_base                            |    6 +
 drivers/event/Makefile                        |    1 +
 drivers/event/sw/Makefile                     |   69 +
 drivers/event/sw/event_ring.h                 |  185 ++
 drivers/event/sw/iq_ring.h                    |  176 ++
 drivers/event/sw/rte_pmd_evdev_sw_version.map |    3 +
 drivers/event/sw/sw_evdev.c                   |  818 +++++++
 drivers/event/sw/sw_evdev.h                   |  318 +++
 drivers/event/sw/sw_evdev_scheduler.c         |  602 +++++
 drivers/event/sw/sw_evdev_worker.c            |  188 ++
 drivers/event/sw/sw_evdev_xstats.c            |  674 ++++++
 lib/librte_eventdev/rte_eventdev.c            |   83 +
 lib/librte_eventdev/rte_eventdev.h            |  148 +-
 lib/librte_eventdev/rte_eventdev_pmd.h        |   74 +
 lib/librte_eventdev/rte_eventdev_version.map  |    4 +
 mk/rte.app.mk                                 |    1 +
 20 files changed, 6567 insertions(+), 5 deletions(-)
 create mode 100644 app/test/test_eventdev_sw.c
 create mode 100644 drivers/event/sw/Makefile
 create mode 100644 drivers/event/sw/event_ring.h
 create mode 100644 drivers/event/sw/iq_ring.h
 create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
 create mode 100644 drivers/event/sw/sw_evdev.c
 create mode 100644 drivers/event/sw/sw_evdev.h
 create mode 100644 drivers/event/sw/sw_evdev_scheduler.c
 create mode 100644 drivers/event/sw/sw_evdev_worker.c
 create mode 100644 drivers/event/sw/sw_evdev_xstats.c

-- 
2.7.4

[dpdk-dev] [PATCH v4 01/17] eventdev: increase size of enq deq conf variables

[Harry van Haaren]

Large port enqueue sizes were not supported as the value
it was stored in was a uint8_t. Using uint8_ts to save
space in config apis makes no sense - increasing the 3
instances of uint8_t enqueue / dequeue depths to more
appropriate values (based on the context around them).

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
 lib/librte_eventdev/rte_eventdev.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index e2fdf72..4876353 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -426,7 +426,7 @@ struct rte_event_dev_config {
 	 * This value cannot exceed the *max_event_queue_flows* which previously
 	 * provided in rte_event_dev_info_get()
 	 */
-	uint8_t nb_event_port_dequeue_depth;
+	uint32_t nb_event_port_dequeue_depth;
 	/**< Maximum number of events can be dequeued at a time from an
 	 * event port by this device.
 	 * This value cannot exceed the *max_event_port_dequeue_depth*
@@ -637,12 +637,12 @@ struct rte_event_port_conf {
 	 * which was previously supplied to rte_event_dev_configure().
 	 * This should be set to '-1' for *open system*.
 	 */
-	uint8_t dequeue_depth;
+	uint16_t dequeue_depth;
 	/**< Configure number of bulk dequeues for this event port.
 	 * This value cannot exceed the *nb_event_port_dequeue_depth*
 	 * which previously supplied to rte_event_dev_configure()
 	 */
-	uint8_t enqueue_depth;
+	uint16_t enqueue_depth;
 	/**< Configure number of bulk enqueues for this event port.
 	 * This value cannot exceed the *nb_event_port_enqueue_depth*
 	 * which previously supplied to rte_event_dev_configure()
-- 
2.7.4

Re: [dpdk-dev] [PATCH v4 01/17] eventdev: increase size of enq deq conf variables

[Jerin Jacob]

On Fri, Mar 10, 2017 at 07:43:16PM +0000, Harry van Haaren wrote:
> Large port enqueue sizes were not supported as the value
> it was stored in was a uint8_t. Using uint8_ts to save
> space in config apis makes no sense - increasing the 3
> instances of uint8_t enqueue / dequeue depths to more
> appropriate values (based on the context around them).
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>


Applied to dpdk-next-eventdev/master. Thanks.

> ---
>  lib/librte_eventdev/rte_eventdev.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> index e2fdf72..4876353 100644
> --- a/lib/librte_eventdev/rte_eventdev.h
> +++ b/lib/librte_eventdev/rte_eventdev.h
> @@ -426,7 +426,7 @@ struct rte_event_dev_config {
>  	 * This value cannot exceed the *max_event_queue_flows* which previously
>  	 * provided in rte_event_dev_info_get()
>  	 */
> -	uint8_t nb_event_port_dequeue_depth;
> +	uint32_t nb_event_port_dequeue_depth;
>  	/**< Maximum number of events can be dequeued at a time from an
>  	 * event port by this device.
>  	 * This value cannot exceed the *max_event_port_dequeue_depth*
> @@ -637,12 +637,12 @@ struct rte_event_port_conf {
>  	 * which was previously supplied to rte_event_dev_configure().
>  	 * This should be set to '-1' for *open system*.
>  	 */
> -	uint8_t dequeue_depth;
> +	uint16_t dequeue_depth;
>  	/**< Configure number of bulk dequeues for this event port.
>  	 * This value cannot exceed the *nb_event_port_dequeue_depth*
>  	 * which previously supplied to rte_event_dev_configure()
>  	 */
> -	uint8_t enqueue_depth;
> +	uint16_t enqueue_depth;
>  	/**< Configure number of bulk enqueues for this event port.
>  	 * This value cannot exceed the *nb_event_port_enqueue_depth*
>  	 * which previously supplied to rte_event_dev_configure()
> -- 
> 2.7.4
> 

[dpdk-dev] [PATCH v4 02/17] app/test: eventdev link all queues before start

[Harry van Haaren]

The software eventdev can lock-up if not all queues are
linked to a port. For this reason, the software evendev
fails to start if queues are not linked to anything.

This commit creates dummy links from all queues to port
0 in the eventdev setup function and start/stop test,
which would otherwise fail due to unlinked queues.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 app/test/test_eventdev.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
index 042a446..324ef5a 100644
--- a/app/test/test_eventdev.c
+++ b/app/test/test_eventdev.c
@@ -543,6 +543,10 @@ test_eventdev_start_stop(void)
 		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
 	}
 
+	ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
+	TEST_ASSERT(ret == rte_event_queue_count(TEST_DEV_ID),
+			"Failed to link port, device %d", TEST_DEV_ID);
+
 	ret = rte_event_dev_start(TEST_DEV_ID);
 	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
 
@@ -569,6 +573,10 @@ eventdev_setup_device(void)
 		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
 	}
 
+	ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
+	TEST_ASSERT(ret == rte_event_queue_count(TEST_DEV_ID),
+			"Failed to link port, device %d", TEST_DEV_ID);
+
 	ret = rte_event_dev_start(TEST_DEV_ID);
 	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
 
-- 
2.7.4

Re: [dpdk-dev] [PATCH v4 02/17] app/test: eventdev link all queues before start

[Jerin Jacob]

On Fri, Mar 10, 2017 at 07:43:17PM +0000, Harry van Haaren wrote:
> The software eventdev can lock-up if not all queues are
> linked to a port. For this reason, the software evendev
> fails to start if queues are not linked to anything.
> 
> This commit creates dummy links from all queues to port
> 0 in the eventdev setup function and start/stop test,
> which would otherwise fail due to unlinked queues.
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

> ---
>  app/test/test_eventdev.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
> index 042a446..324ef5a 100644
> --- a/app/test/test_eventdev.c
> +++ b/app/test/test_eventdev.c
> @@ -543,6 +543,10 @@ test_eventdev_start_stop(void)
>  		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
>  	}
>  
> +	ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
> +	TEST_ASSERT(ret == rte_event_queue_count(TEST_DEV_ID),
> +			"Failed to link port, device %d", TEST_DEV_ID);
> +
>  	ret = rte_event_dev_start(TEST_DEV_ID);
>  	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
>  
> @@ -569,6 +573,10 @@ eventdev_setup_device(void)
>  		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
>  	}
>  
> +	ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
> +	TEST_ASSERT(ret == rte_event_queue_count(TEST_DEV_ID),
> +			"Failed to link port, device %d", TEST_DEV_ID);
> +
>  	ret = rte_event_dev_start(TEST_DEV_ID);
>  	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
>  
> -- 
> 2.7.4
> 

Re: [dpdk-dev] [PATCH v4 02/17] app/test: eventdev link all queues before start

[Jerin Jacob]

On Mon, Mar 20, 2017 at 10:16:04AM +0530, Jerin Jacob wrote:
> On Fri, Mar 10, 2017 at 07:43:17PM +0000, Harry van Haaren wrote:
> > The software eventdev can lock-up if not all queues are
> > linked to a port. For this reason, the software evendev
> > fails to start if queues are not linked to anything.
> > 
> > This commit creates dummy links from all queues to port
> > 0 in the eventdev setup function and start/stop test,
> > which would otherwise fail due to unlinked queues.
> > 
> > Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> 
> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

Applied to dpdk-next-eventdev/master. Thanks.

> 
> > ---
> >  app/test/test_eventdev.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
> > index 042a446..324ef5a 100644
> > --- a/app/test/test_eventdev.c
> > +++ b/app/test/test_eventdev.c
> > @@ -543,6 +543,10 @@ test_eventdev_start_stop(void)
> >  		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
> >  	}
> >  
> > +	ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
> > +	TEST_ASSERT(ret == rte_event_queue_count(TEST_DEV_ID),
> > +			"Failed to link port, device %d", TEST_DEV_ID);
> > +
> >  	ret = rte_event_dev_start(TEST_DEV_ID);
> >  	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
> >  
> > @@ -569,6 +573,10 @@ eventdev_setup_device(void)
> >  		TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
> >  	}
> >  
> > +	ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
> > +	TEST_ASSERT(ret == rte_event_queue_count(TEST_DEV_ID),
> > +			"Failed to link port, device %d", TEST_DEV_ID);
> > +
> >  	ret = rte_event_dev_start(TEST_DEV_ID);
> >  	TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
> >  
> > -- 
> > 2.7.4
> > 

[dpdk-dev] [PATCH v4 03/17] test/eventdev: rework timeout ticks test

[Harry van Haaren]

This commit reworks the failing of the timeout_ticks
test to pass when -ENOTSUP is returned, as this is a valid
return if the PMD does not support waiting on dequeue().

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 app/test/test_eventdev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
index 324ef5a..2ab51c3 100644
--- a/app/test/test_eventdev.c
+++ b/app/test/test_eventdev.c
@@ -519,7 +519,9 @@ test_eventdev_timeout_ticks(void)
 	uint64_t timeout_ticks;
 
 	ret = rte_event_dequeue_timeout_ticks(TEST_DEV_ID, 100, &timeout_ticks);
-	TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
+	/* -ENOTSUP is a valid return if timeout is not supported by device  */
+	if (ret != -ENOTSUP)
+		TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
 
 	return TEST_SUCCESS;
 }
-- 
2.7.4

[dpdk-dev] [PATCH v4 04/17] eventdev: add APIs for extended stats

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in APIs for extended stats so that eventdev implementations can report
out information on their internal state. The APIs are based on, but not
identical to, the equivalent ethdev functions.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

---

v3 -> v4:
- xstats API reset allows selection of device/port/queue to reset
---
 lib/librte_eventdev/rte_eventdev.c           |  83 ++++++++++++++++
 lib/librte_eventdev/rte_eventdev.h           | 142 +++++++++++++++++++++++++++
 lib/librte_eventdev/rte_eventdev_pmd.h       |  74 ++++++++++++++
 lib/librte_eventdev/rte_eventdev_version.map |   4 +
 4 files changed, 303 insertions(+)

diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
index 68bfc3b..0280ef0 100644
--- a/lib/librte_eventdev/rte_eventdev.c
+++ b/lib/librte_eventdev/rte_eventdev.c
@@ -920,6 +920,89 @@ rte_event_dev_dump(uint8_t dev_id, FILE *f)
 
 }
 
+static int
+xstats_get_count(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
+		uint8_t queue_port_id)
+{
+	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+	if (dev->dev_ops->xstats_get_names != NULL)
+		return (*dev->dev_ops->xstats_get_names)(dev, mode,
+							queue_port_id,
+							NULL, NULL, 0);
+	return 0;
+}
+
+int
+rte_event_dev_xstats_names_get(uint8_t dev_id,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		struct rte_event_dev_xstats_name *xstats_names,
+		unsigned int *ids, unsigned int size)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -ENODEV);
+	const int cnt_expected_entries = xstats_get_count(dev_id, mode,
+							  queue_port_id);
+	if (xstats_names == NULL || cnt_expected_entries < 0 ||
+			(int)size < cnt_expected_entries)
+		return cnt_expected_entries;
+
+	/* dev_id checked above */
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+	if (dev->dev_ops->xstats_get_names != NULL)
+		return (*dev->dev_ops->xstats_get_names)(dev, mode,
+				queue_port_id, xstats_names, ids, size);
+
+	return -ENOTSUP;
+}
+
+/* retrieve eventdev extended statistics */
+int
+rte_event_dev_xstats_get(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
+		uint8_t queue_port_id, const unsigned int ids[],
+		uint64_t values[], unsigned int n)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -ENODEV);
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+	/* implemented by the driver */
+	if (dev->dev_ops->xstats_get != NULL)
+		return (*dev->dev_ops->xstats_get)(dev, mode, queue_port_id,
+				ids, values, n);
+	return -ENOTSUP;
+}
+
+uint64_t
+rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+		unsigned int *id)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, 0);
+	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+	unsigned int temp = -1;
+
+	if (id != NULL)
+		*id = (unsigned int)-1;
+	else
+		id = &temp; /* ensure driver never gets a NULL value */
+
+	/* implemented by driver */
+	if (dev->dev_ops->xstats_get_by_name != NULL)
+		return (*dev->dev_ops->xstats_get_by_name)(dev, name, id);
+	return -ENOTSUP;
+}
+
+int rte_event_dev_xstats_reset(uint8_t dev_id,
+		enum rte_event_dev_xstats_mode mode, int16_t queue_port_id,
+		const uint32_t ids[], uint32_t nb_ids)
+{
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+	if (dev->dev_ops->xstats_reset != NULL)
+		return (*dev->dev_ops->xstats_reset)(dev, mode, queue_port_id,
+							ids, nb_ids);
+	return -ENOTSUP;
+}
+
 int
 rte_event_dev_start(uint8_t dev_id)
 {
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index 4876353..d462047 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -1405,6 +1405,148 @@ rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
 int
 rte_event_dev_dump(uint8_t dev_id, FILE *f);
 
+/** Maximum name length for extended statistics counters */
+#define RTE_EVENT_DEV_XSTATS_NAME_SIZE 64
+
+/**
+ * Selects the component of the eventdev to retrieve statistics from.
+ */
+enum rte_event_dev_xstats_mode {
+	RTE_EVENT_DEV_XSTATS_DEVICE,
+	RTE_EVENT_DEV_XSTATS_PORT,
+	RTE_EVENT_DEV_XSTATS_QUEUE,
+};
+
+/**
+ * A name-key lookup element for extended statistics.
+ *
+ * This structure is used to map between names and ID numbers
+ * for extended ethdev statistics.
+ */
+struct rte_event_dev_xstats_name {
+	char name[RTE_EVENT_DEV_XSTATS_NAME_SIZE];
+};
+
+/**
+ * Retrieve names of extended statistics of an event device.
+ *
+ * @param dev_id
+ *   The identifier of the event device.
+ * @param mode
+ *   The mode of statistics to retrieve. Choices include the device statistics,
+ *   port statistics or queue statistics.
+ * @param queue_port_id
+ *   Used to specify the port or queue number in queue or port mode, and is
+ *   ignored in device mode.
+ * @param[out] xstats_names
+ *   Block of memory to insert names into. Must be at least size in capacity.
+ *   If set to NULL, function returns required capacity.
+ * @param[out] ids
+ *   Block of memory to insert ids into. Must be at least size in capacity.
+ *   If set to NULL, function returns required capacity. The id values returned
+ *   can be passed to *rte_event_dev_xstats_get* to select statistics.
+ * @param size
+ *   Capacity of xstats_names (number of names).
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   - negative value on error:
+ *        -ENODEV for invalid *dev_id*
+ *        -EINVAL for invalid mode, queue port or id parameters
+ *        -ENOTSUP if the device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_names_get(uint8_t dev_id,
+			       enum rte_event_dev_xstats_mode mode,
+			       uint8_t queue_port_id,
+			       struct rte_event_dev_xstats_name *xstats_names,
+			       unsigned int *ids,
+			       unsigned int size);
+
+/**
+ * Retrieve extended statistics of an event device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param mode
+ *  The mode of statistics to retrieve. Choices include the device statistics,
+ *  port statistics or queue statistics.
+ * @param queue_port_id
+ *   Used to specify the port or queue number in queue or port mode, and is
+ *   ignored in device mode.
+ * @param ids
+ *   The id numbers of the stats to get. The ids can be got from the stat
+ *   position in the stat list from rte_event_dev_get_xstats_names(), or
+ *   by using rte_eventdev_get_xstats_by_name()
+ * @param[out] values
+ *   The values for each stats request by ID.
+ * @param n
+ *   The number of stats requested
+ * @return
+ *   - positive value: number of stat entries filled into the values array
+ *   - negative value on error:
+ *        -ENODEV for invalid *dev_id*
+ *        -EINVAL for invalid mode, queue port or id parameters
+ *        -ENOTSUP if the device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_get(uint8_t dev_id,
+			 enum rte_event_dev_xstats_mode mode,
+			 uint8_t queue_port_id,
+			 const unsigned int ids[],
+			 uint64_t values[], unsigned int n);
+
+/**
+ * Retrieve the value of a single stat by requesting it by name.
+ *
+ * @param dev_id
+ *   The identifier of the device
+ * @param name
+ *   The stat name to retrieve
+ * @param[out] id
+ *   If non-NULL, the numerical id of the stat will be returned, so that further
+ *   requests for the stat can be got using rte_eventdev_xstats_get, which will
+ *   be faster as it doesn't need to scan a list of names for the stat.
+ *   If the stat cannot be found, the id returned will be (unsigned)-1.
+ * @return
+ *   - positive value or zero: the stat value
+ *   - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
+ */
+uint64_t
+rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+				 unsigned int *id);
+
+/**
+ * Reset the values of the xstats of the selected component in the device.
+ *
+ * @param dev_id
+ *   The identifier of the device
+ * @param mode
+ *   The mode of the statistics to reset. Choose from device, queue or port.
+ * @param queue_port_id
+ *   The queue or port to reset. 0 and positive values select ports and queues,
+ *   while -1 indicates all ports or queues.
+ * @param ids
+ *   Selects specific statistics to be reset. When NULL, all statistics selected
+ *   by *mode* will be reset. If non-NULL, must point to array of at least
+ *   *nb_ids* size.
+ * @param nb_ids
+ *   The number of ids available from the *ids* array. Ignored when ids is NULL.
+ * @return
+ *   - zero: successfully reset the statistics to zero
+ *   - negative value: -EINVAL invalid parameters, -ENOTSUP if not supported.
+ */
+int
+rte_event_dev_xstats_reset(uint8_t dev_id,
+			   enum rte_event_dev_xstats_mode mode,
+			   int16_t queue_port_id,
+			   const uint32_t ids[],
+			   uint32_t nb_ids);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
index 828dfce..86e0076 100644
--- a/lib/librte_eventdev/rte_eventdev_pmd.h
+++ b/lib/librte_eventdev/rte_eventdev_pmd.h
@@ -421,6 +421,71 @@ typedef void (*eventdev_dequeue_timeout_ticks_t)(struct rte_eventdev *dev,
  */
 typedef void (*eventdev_dump_t)(struct rte_eventdev *dev, FILE *f);
 
+/**
+ * Retrieve a set of statistics from device
+ *
+ * @param dev
+ *   Event device pointer
+ * @param ids
+ *   The stat ids to retrieve
+ * @param values
+ *   The returned stat values
+ * @param n
+ *   The number of id values and entries in the values array
+ * @return
+ *   The number of stat values successfully filled into the values array
+ */
+typedef int (*eventdev_xstats_get_t)(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		const unsigned int ids[], uint64_t values[], unsigned int n);
+
+/**
+ * Resets the statistic values in xstats for the device, based on mode.
+ */
+typedef int (*eventdev_xstats_reset_t)(struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode,
+		int16_t queue_port_id,
+		const uint32_t ids[],
+		uint32_t nb_ids);
+
+/**
+ * Get names of extended stats of an event device
+ *
+ * @param dev
+ *   Event device pointer
+ * @param xstats_names
+ *   Array of name values to be filled in
+ * @param size
+ *   Number of values in the xstats_names array
+ * @return
+ *   When size >= the number of stats, return the number of stat values filled
+ *   into the array.
+ *   When size < the number of available stats, return the number of stats
+ *   values, and do not fill in any data into xstats_names.
+ */
+typedef int (*eventdev_xstats_get_names_t)(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		struct rte_event_dev_xstats_name *xstats_names,
+		unsigned int *ids, unsigned int size);
+
+/**
+ * Get value of one stats and optionally return its id
+ *
+ * @param dev
+ *   Event device pointer
+ * @param name
+ *   The name of the stat to retrieve
+ * @param id
+ *   Pointer to an unsigned int where we store the stat-id for future reference.
+ *   This pointer may be null if the id is not required.
+ * @return
+ *   The value of the stat, or (uint64_t)-1 if the stat is not found.
+ *   If the stat is not found, the id value will be returned as (unsigned)-1,
+ *   if id pointer is non-NULL
+ */
+typedef uint64_t (*eventdev_xstats_get_by_name)(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id);
+
 /** Event device operations function pointer table */
 struct rte_eventdev_ops {
 	eventdev_info_get_t dev_infos_get;	/**< Get device info. */
@@ -451,6 +516,15 @@ struct rte_eventdev_ops {
 	/**< Converts ns to *timeout_ticks* value for rte_event_dequeue() */
 	eventdev_dump_t dump;
 	/* Dump internal information */
+
+	eventdev_xstats_get_t xstats_get;
+	/**< Get extended device statistics. */
+	eventdev_xstats_get_names_t xstats_get_names;
+	/**< Get names of extended stats. */
+	eventdev_xstats_get_by_name xstats_get_by_name;
+	/**< Get one value by name. */
+	eventdev_xstats_reset_t xstats_reset;
+	/**< Reset the statistics values in xstats. */
 };
 
 /**
diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/rte_eventdev_version.map
index 7a6921c..1fa6b33 100644
--- a/lib/librte_eventdev/rte_eventdev_version.map
+++ b/lib/librte_eventdev/rte_eventdev_version.map
@@ -12,6 +12,10 @@ DPDK_17.05 {
 	rte_event_dev_stop;
 	rte_event_dev_close;
 	rte_event_dev_dump;
+	rte_event_dev_xstats_by_name_get;
+	rte_event_dev_xstats_get;
+	rte_event_dev_xstats_names_get;
+	rte_event_dev_xstats_reset;
 
 	rte_event_port_default_conf_get;
 	rte_event_port_setup;
-- 
2.7.4

Re: [dpdk-dev] [PATCH v4 04/17] eventdev: add APIs for extended stats

[Jerin Jacob]

On Fri, Mar 10, 2017 at 07:43:19PM +0000, Harry van Haaren wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add in APIs for extended stats so that eventdev implementations can report
> out information on their internal state. The APIs are based on, but not
> identical to, the equivalent ethdev functions.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

> 
> ---
> 
> v3 -> v4:
> - xstats API reset allows selection of device/port/queue to reset
> ---
>  lib/librte_eventdev/rte_eventdev.c           |  83 ++++++++++++++++
>  lib/librte_eventdev/rte_eventdev.h           | 142 +++++++++++++++++++++++++++
>  lib/librte_eventdev/rte_eventdev_pmd.h       |  74 ++++++++++++++
>  lib/librte_eventdev/rte_eventdev_version.map |   4 +
>  4 files changed, 303 insertions(+)
> 
> diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
> index 68bfc3b..0280ef0 100644
> --- a/lib/librte_eventdev/rte_eventdev.c
> +++ b/lib/librte_eventdev/rte_eventdev.c
> @@ -920,6 +920,89 @@ rte_event_dev_dump(uint8_t dev_id, FILE *f)
>  
>  }
>  
> +static int
> +xstats_get_count(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
> +		uint8_t queue_port_id)
> +{
> +	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> +	if (dev->dev_ops->xstats_get_names != NULL)
> +		return (*dev->dev_ops->xstats_get_names)(dev, mode,
> +							queue_port_id,
> +							NULL, NULL, 0);
> +	return 0;
> +}
> +
> +int
> +rte_event_dev_xstats_names_get(uint8_t dev_id,
> +		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
> +		struct rte_event_dev_xstats_name *xstats_names,
> +		unsigned int *ids, unsigned int size)
> +{
> +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -ENODEV);
> +	const int cnt_expected_entries = xstats_get_count(dev_id, mode,
> +							  queue_port_id);
> +	if (xstats_names == NULL || cnt_expected_entries < 0 ||
> +			(int)size < cnt_expected_entries)
> +		return cnt_expected_entries;
> +
> +	/* dev_id checked above */
> +	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> +
> +	if (dev->dev_ops->xstats_get_names != NULL)
> +		return (*dev->dev_ops->xstats_get_names)(dev, mode,
> +				queue_port_id, xstats_names, ids, size);
> +
> +	return -ENOTSUP;
> +}
> +
> +/* retrieve eventdev extended statistics */
> +int
> +rte_event_dev_xstats_get(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
> +		uint8_t queue_port_id, const unsigned int ids[],
> +		uint64_t values[], unsigned int n)
> +{
> +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -ENODEV);
> +	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> +
> +	/* implemented by the driver */
> +	if (dev->dev_ops->xstats_get != NULL)
> +		return (*dev->dev_ops->xstats_get)(dev, mode, queue_port_id,
> +				ids, values, n);
> +	return -ENOTSUP;
> +}
> +
> +uint64_t
> +rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
> +		unsigned int *id)
> +{
> +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, 0);
> +	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> +	unsigned int temp = -1;
> +
> +	if (id != NULL)
> +		*id = (unsigned int)-1;
> +	else
> +		id = &temp; /* ensure driver never gets a NULL value */
> +
> +	/* implemented by driver */
> +	if (dev->dev_ops->xstats_get_by_name != NULL)
> +		return (*dev->dev_ops->xstats_get_by_name)(dev, name, id);
> +	return -ENOTSUP;
> +}
> +
> +int rte_event_dev_xstats_reset(uint8_t dev_id,
> +		enum rte_event_dev_xstats_mode mode, int16_t queue_port_id,
> +		const uint32_t ids[], uint32_t nb_ids)
> +{
> +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
> +	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> +
> +	if (dev->dev_ops->xstats_reset != NULL)
> +		return (*dev->dev_ops->xstats_reset)(dev, mode, queue_port_id,
> +							ids, nb_ids);
> +	return -ENOTSUP;
> +}
> +
>  int
>  rte_event_dev_start(uint8_t dev_id)
>  {
> diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> index 4876353..d462047 100644
> --- a/lib/librte_eventdev/rte_eventdev.h
> +++ b/lib/librte_eventdev/rte_eventdev.h
> @@ -1405,6 +1405,148 @@ rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
>  int
>  rte_event_dev_dump(uint8_t dev_id, FILE *f);
>  
> +/** Maximum name length for extended statistics counters */
> +#define RTE_EVENT_DEV_XSTATS_NAME_SIZE 64
> +
> +/**
> + * Selects the component of the eventdev to retrieve statistics from.
> + */
> +enum rte_event_dev_xstats_mode {
> +	RTE_EVENT_DEV_XSTATS_DEVICE,
> +	RTE_EVENT_DEV_XSTATS_PORT,
> +	RTE_EVENT_DEV_XSTATS_QUEUE,
> +};
> +
> +/**
> + * A name-key lookup element for extended statistics.
> + *
> + * This structure is used to map between names and ID numbers
> + * for extended ethdev statistics.
> + */
> +struct rte_event_dev_xstats_name {
> +	char name[RTE_EVENT_DEV_XSTATS_NAME_SIZE];
> +};
> +
> +/**
> + * Retrieve names of extended statistics of an event device.
> + *
> + * @param dev_id
> + *   The identifier of the event device.
> + * @param mode
> + *   The mode of statistics to retrieve. Choices include the device statistics,
> + *   port statistics or queue statistics.
> + * @param queue_port_id
> + *   Used to specify the port or queue number in queue or port mode, and is
> + *   ignored in device mode.
> + * @param[out] xstats_names
> + *   Block of memory to insert names into. Must be at least size in capacity.
> + *   If set to NULL, function returns required capacity.
> + * @param[out] ids
> + *   Block of memory to insert ids into. Must be at least size in capacity.
> + *   If set to NULL, function returns required capacity. The id values returned
> + *   can be passed to *rte_event_dev_xstats_get* to select statistics.
> + * @param size
> + *   Capacity of xstats_names (number of names).
> + * @return
> + *   - positive value lower or equal to size: success. The return value
> + *     is the number of entries filled in the stats table.
> + *   - positive value higher than size: error, the given statistics table
> + *     is too small. The return value corresponds to the size that should
> + *     be given to succeed. The entries in the table are not valid and
> + *     shall not be used by the caller.
> + *   - negative value on error:
> + *        -ENODEV for invalid *dev_id*
> + *        -EINVAL for invalid mode, queue port or id parameters
> + *        -ENOTSUP if the device doesn't support this function.
> + */
> +int
> +rte_event_dev_xstats_names_get(uint8_t dev_id,
> +			       enum rte_event_dev_xstats_mode mode,
> +			       uint8_t queue_port_id,
> +			       struct rte_event_dev_xstats_name *xstats_names,
> +			       unsigned int *ids,
> +			       unsigned int size);
> +
> +/**
> + * Retrieve extended statistics of an event device.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param mode
> + *  The mode of statistics to retrieve. Choices include the device statistics,
> + *  port statistics or queue statistics.
> + * @param queue_port_id
> + *   Used to specify the port or queue number in queue or port mode, and is
> + *   ignored in device mode.
> + * @param ids
> + *   The id numbers of the stats to get. The ids can be got from the stat
> + *   position in the stat list from rte_event_dev_get_xstats_names(), or
> + *   by using rte_eventdev_get_xstats_by_name()
> + * @param[out] values
> + *   The values for each stats request by ID.
> + * @param n
> + *   The number of stats requested
> + * @return
> + *   - positive value: number of stat entries filled into the values array
> + *   - negative value on error:
> + *        -ENODEV for invalid *dev_id*
> + *        -EINVAL for invalid mode, queue port or id parameters
> + *        -ENOTSUP if the device doesn't support this function.
> + */
> +int
> +rte_event_dev_xstats_get(uint8_t dev_id,
> +			 enum rte_event_dev_xstats_mode mode,
> +			 uint8_t queue_port_id,
> +			 const unsigned int ids[],
> +			 uint64_t values[], unsigned int n);
> +
> +/**
> + * Retrieve the value of a single stat by requesting it by name.
> + *
> + * @param dev_id
> + *   The identifier of the device
> + * @param name
> + *   The stat name to retrieve
> + * @param[out] id
> + *   If non-NULL, the numerical id of the stat will be returned, so that further
> + *   requests for the stat can be got using rte_eventdev_xstats_get, which will
> + *   be faster as it doesn't need to scan a list of names for the stat.
> + *   If the stat cannot be found, the id returned will be (unsigned)-1.
> + * @return
> + *   - positive value or zero: the stat value
> + *   - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
> + */
> +uint64_t
> +rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
> +				 unsigned int *id);
> +
> +/**
> + * Reset the values of the xstats of the selected component in the device.
> + *
> + * @param dev_id
> + *   The identifier of the device
> + * @param mode
> + *   The mode of the statistics to reset. Choose from device, queue or port.
> + * @param queue_port_id
> + *   The queue or port to reset. 0 and positive values select ports and queues,
> + *   while -1 indicates all ports or queues.
> + * @param ids
> + *   Selects specific statistics to be reset. When NULL, all statistics selected
> + *   by *mode* will be reset. If non-NULL, must point to array of at least
> + *   *nb_ids* size.
> + * @param nb_ids
> + *   The number of ids available from the *ids* array. Ignored when ids is NULL.
> + * @return
> + *   - zero: successfully reset the statistics to zero
> + *   - negative value: -EINVAL invalid parameters, -ENOTSUP if not supported.
> + */
> +int
> +rte_event_dev_xstats_reset(uint8_t dev_id,
> +			   enum rte_event_dev_xstats_mode mode,
> +			   int16_t queue_port_id,
> +			   const uint32_t ids[],
> +			   uint32_t nb_ids);
> +
>  #ifdef __cplusplus
>  }
>  #endif
> diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
> index 828dfce..86e0076 100644
> --- a/lib/librte_eventdev/rte_eventdev_pmd.h
> +++ b/lib/librte_eventdev/rte_eventdev_pmd.h
> @@ -421,6 +421,71 @@ typedef void (*eventdev_dequeue_timeout_ticks_t)(struct rte_eventdev *dev,
>   */
>  typedef void (*eventdev_dump_t)(struct rte_eventdev *dev, FILE *f);
>  
> +/**
> + * Retrieve a set of statistics from device
> + *
> + * @param dev
> + *   Event device pointer
> + * @param ids
> + *   The stat ids to retrieve
> + * @param values
> + *   The returned stat values
> + * @param n
> + *   The number of id values and entries in the values array
> + * @return
> + *   The number of stat values successfully filled into the values array
> + */
> +typedef int (*eventdev_xstats_get_t)(const struct rte_eventdev *dev,
> +		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
> +		const unsigned int ids[], uint64_t values[], unsigned int n);
> +
> +/**
> + * Resets the statistic values in xstats for the device, based on mode.
> + */
> +typedef int (*eventdev_xstats_reset_t)(struct rte_eventdev *dev,
> +		enum rte_event_dev_xstats_mode mode,
> +		int16_t queue_port_id,
> +		const uint32_t ids[],
> +		uint32_t nb_ids);
> +
> +/**
> + * Get names of extended stats of an event device
> + *
> + * @param dev
> + *   Event device pointer
> + * @param xstats_names
> + *   Array of name values to be filled in
> + * @param size
> + *   Number of values in the xstats_names array
> + * @return
> + *   When size >= the number of stats, return the number of stat values filled
> + *   into the array.
> + *   When size < the number of available stats, return the number of stats
> + *   values, and do not fill in any data into xstats_names.
> + */
> +typedef int (*eventdev_xstats_get_names_t)(const struct rte_eventdev *dev,
> +		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
> +		struct rte_event_dev_xstats_name *xstats_names,
> +		unsigned int *ids, unsigned int size);
> +
> +/**
> + * Get value of one stats and optionally return its id
> + *
> + * @param dev
> + *   Event device pointer
> + * @param name
> + *   The name of the stat to retrieve
> + * @param id
> + *   Pointer to an unsigned int where we store the stat-id for future reference.
> + *   This pointer may be null if the id is not required.
> + * @return
> + *   The value of the stat, or (uint64_t)-1 if the stat is not found.
> + *   If the stat is not found, the id value will be returned as (unsigned)-1,
> + *   if id pointer is non-NULL
> + */
> +typedef uint64_t (*eventdev_xstats_get_by_name)(const struct rte_eventdev *dev,
> +		const char *name, unsigned int *id);
> +
>  /** Event device operations function pointer table */
>  struct rte_eventdev_ops {
>  	eventdev_info_get_t dev_infos_get;	/**< Get device info. */
> @@ -451,6 +516,15 @@ struct rte_eventdev_ops {
>  	/**< Converts ns to *timeout_ticks* value for rte_event_dequeue() */
>  	eventdev_dump_t dump;
>  	/* Dump internal information */
> +
> +	eventdev_xstats_get_t xstats_get;
> +	/**< Get extended device statistics. */
> +	eventdev_xstats_get_names_t xstats_get_names;
> +	/**< Get names of extended stats. */
> +	eventdev_xstats_get_by_name xstats_get_by_name;
> +	/**< Get one value by name. */
> +	eventdev_xstats_reset_t xstats_reset;
> +	/**< Reset the statistics values in xstats. */
>  };
>  
>  /**
> diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/rte_eventdev_version.map
> index 7a6921c..1fa6b33 100644
> --- a/lib/librte_eventdev/rte_eventdev_version.map
> +++ b/lib/librte_eventdev/rte_eventdev_version.map
> @@ -12,6 +12,10 @@ DPDK_17.05 {
>  	rte_event_dev_stop;
>  	rte_event_dev_close;
>  	rte_event_dev_dump;
> +	rte_event_dev_xstats_by_name_get;
> +	rte_event_dev_xstats_get;
> +	rte_event_dev_xstats_names_get;
> +	rte_event_dev_xstats_reset;
>  
>  	rte_event_port_default_conf_get;
>  	rte_event_port_setup;
> -- 
> 2.7.4
> 

Re: [dpdk-dev] [PATCH v4 04/17] eventdev: add APIs for extended stats

[Jerin Jacob]

On Fri, Mar 17, 2017 at 05:52:28PM +0530, Jerin Jacob wrote:
> On Fri, Mar 10, 2017 at 07:43:19PM +0000, Harry van Haaren wrote:
> > From: Bruce Richardson <bruce.richardson@intel.com>
> > 
> > Add in APIs for extended stats so that eventdev implementations can report
> > out information on their internal state. The APIs are based on, but not
> > identical to, the equivalent ethdev functions.
> > 
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> 
> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

Applied to dpdk-next-eventdev/master. Thanks.

> 
> > 
> > ---
> > 
> > v3 -> v4:
> > - xstats API reset allows selection of device/port/queue to reset
> > ---
> >  lib/librte_eventdev/rte_eventdev.c           |  83 ++++++++++++++++
> >  lib/librte_eventdev/rte_eventdev.h           | 142 +++++++++++++++++++++++++++
> >  lib/librte_eventdev/rte_eventdev_pmd.h       |  74 ++++++++++++++
> >  lib/librte_eventdev/rte_eventdev_version.map |   4 +
> >  4 files changed, 303 insertions(+)
> > 
> > diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
> > index 68bfc3b..0280ef0 100644
> > --- a/lib/librte_eventdev/rte_eventdev.c
> > +++ b/lib/librte_eventdev/rte_eventdev.c
> > @@ -920,6 +920,89 @@ rte_event_dev_dump(uint8_t dev_id, FILE *f)
> >  
> >  }
> >  
> > +static int
> > +xstats_get_count(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
> > +		uint8_t queue_port_id)
> > +{
> > +	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> > +	if (dev->dev_ops->xstats_get_names != NULL)
> > +		return (*dev->dev_ops->xstats_get_names)(dev, mode,
> > +							queue_port_id,
> > +							NULL, NULL, 0);
> > +	return 0;
> > +}
> > +
> > +int
> > +rte_event_dev_xstats_names_get(uint8_t dev_id,
> > +		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
> > +		struct rte_event_dev_xstats_name *xstats_names,
> > +		unsigned int *ids, unsigned int size)
> > +{
> > +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -ENODEV);
> > +	const int cnt_expected_entries = xstats_get_count(dev_id, mode,
> > +							  queue_port_id);
> > +	if (xstats_names == NULL || cnt_expected_entries < 0 ||
> > +			(int)size < cnt_expected_entries)
> > +		return cnt_expected_entries;
> > +
> > +	/* dev_id checked above */
> > +	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> > +
> > +	if (dev->dev_ops->xstats_get_names != NULL)
> > +		return (*dev->dev_ops->xstats_get_names)(dev, mode,
> > +				queue_port_id, xstats_names, ids, size);
> > +
> > +	return -ENOTSUP;
> > +}
> > +
> > +/* retrieve eventdev extended statistics */
> > +int
> > +rte_event_dev_xstats_get(uint8_t dev_id, enum rte_event_dev_xstats_mode mode,
> > +		uint8_t queue_port_id, const unsigned int ids[],
> > +		uint64_t values[], unsigned int n)
> > +{
> > +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -ENODEV);
> > +	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> > +
> > +	/* implemented by the driver */
> > +	if (dev->dev_ops->xstats_get != NULL)
> > +		return (*dev->dev_ops->xstats_get)(dev, mode, queue_port_id,
> > +				ids, values, n);
> > +	return -ENOTSUP;
> > +}
> > +
> > +uint64_t
> > +rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
> > +		unsigned int *id)
> > +{
> > +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, 0);
> > +	const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> > +	unsigned int temp = -1;
> > +
> > +	if (id != NULL)
> > +		*id = (unsigned int)-1;
> > +	else
> > +		id = &temp; /* ensure driver never gets a NULL value */
> > +
> > +	/* implemented by driver */
> > +	if (dev->dev_ops->xstats_get_by_name != NULL)
> > +		return (*dev->dev_ops->xstats_get_by_name)(dev, name, id);
> > +	return -ENOTSUP;
> > +}
> > +
> > +int rte_event_dev_xstats_reset(uint8_t dev_id,
> > +		enum rte_event_dev_xstats_mode mode, int16_t queue_port_id,
> > +		const uint32_t ids[], uint32_t nb_ids)
> > +{
> > +	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
> > +	struct rte_eventdev *dev = &rte_eventdevs[dev_id];
> > +
> > +	if (dev->dev_ops->xstats_reset != NULL)
> > +		return (*dev->dev_ops->xstats_reset)(dev, mode, queue_port_id,
> > +							ids, nb_ids);
> > +	return -ENOTSUP;
> > +}
> > +
> >  int
> >  rte_event_dev_start(uint8_t dev_id)
> >  {
> > diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> > index 4876353..d462047 100644
> > --- a/lib/librte_eventdev/rte_eventdev.h
> > +++ b/lib/librte_eventdev/rte_eventdev.h
> > @@ -1405,6 +1405,148 @@ rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
> >  int
> >  rte_event_dev_dump(uint8_t dev_id, FILE *f);
> >  
> > +/** Maximum name length for extended statistics counters */
> > +#define RTE_EVENT_DEV_XSTATS_NAME_SIZE 64
> > +
> > +/**
> > + * Selects the component of the eventdev to retrieve statistics from.
> > + */
> > +enum rte_event_dev_xstats_mode {
> > +	RTE_EVENT_DEV_XSTATS_DEVICE,
> > +	RTE_EVENT_DEV_XSTATS_PORT,
> > +	RTE_EVENT_DEV_XSTATS_QUEUE,
> > +};
> > +
> > +/**
> > + * A name-key lookup element for extended statistics.
> > + *
> > + * This structure is used to map between names and ID numbers
> > + * for extended ethdev statistics.
> > + */
> > +struct rte_event_dev_xstats_name {
> > +	char name[RTE_EVENT_DEV_XSTATS_NAME_SIZE];
> > +};
> > +
> > +/**
> > + * Retrieve names of extended statistics of an event device.
> > + *
> > + * @param dev_id
> > + *   The identifier of the event device.
> > + * @param mode
> > + *   The mode of statistics to retrieve. Choices include the device statistics,
> > + *   port statistics or queue statistics.
> > + * @param queue_port_id
> > + *   Used to specify the port or queue number in queue or port mode, and is
> > + *   ignored in device mode.
> > + * @param[out] xstats_names
> > + *   Block of memory to insert names into. Must be at least size in capacity.
> > + *   If set to NULL, function returns required capacity.
> > + * @param[out] ids
> > + *   Block of memory to insert ids into. Must be at least size in capacity.
> > + *   If set to NULL, function returns required capacity. The id values returned
> > + *   can be passed to *rte_event_dev_xstats_get* to select statistics.
> > + * @param size
> > + *   Capacity of xstats_names (number of names).
> > + * @return
> > + *   - positive value lower or equal to size: success. The return value
> > + *     is the number of entries filled in the stats table.
> > + *   - positive value higher than size: error, the given statistics table
> > + *     is too small. The return value corresponds to the size that should
> > + *     be given to succeed. The entries in the table are not valid and
> > + *     shall not be used by the caller.
> > + *   - negative value on error:
> > + *        -ENODEV for invalid *dev_id*
> > + *        -EINVAL for invalid mode, queue port or id parameters
> > + *        -ENOTSUP if the device doesn't support this function.
> > + */
> > +int
> > +rte_event_dev_xstats_names_get(uint8_t dev_id,
> > +			       enum rte_event_dev_xstats_mode mode,
> > +			       uint8_t queue_port_id,
> > +			       struct rte_event_dev_xstats_name *xstats_names,
> > +			       unsigned int *ids,
> > +			       unsigned int size);
> > +
> > +/**
> > + * Retrieve extended statistics of an event device.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param mode
> > + *  The mode of statistics to retrieve. Choices include the device statistics,
> > + *  port statistics or queue statistics.
> > + * @param queue_port_id
> > + *   Used to specify the port or queue number in queue or port mode, and is
> > + *   ignored in device mode.
> > + * @param ids
> > + *   The id numbers of the stats to get. The ids can be got from the stat
> > + *   position in the stat list from rte_event_dev_get_xstats_names(), or
> > + *   by using rte_eventdev_get_xstats_by_name()
> > + * @param[out] values
> > + *   The values for each stats request by ID.
> > + * @param n
> > + *   The number of stats requested
> > + * @return
> > + *   - positive value: number of stat entries filled into the values array
> > + *   - negative value on error:
> > + *        -ENODEV for invalid *dev_id*
> > + *        -EINVAL for invalid mode, queue port or id parameters
> > + *        -ENOTSUP if the device doesn't support this function.
> > + */
> > +int
> > +rte_event_dev_xstats_get(uint8_t dev_id,
> > +			 enum rte_event_dev_xstats_mode mode,
> > +			 uint8_t queue_port_id,
> > +			 const unsigned int ids[],
> > +			 uint64_t values[], unsigned int n);
> > +
> > +/**
> > + * Retrieve the value of a single stat by requesting it by name.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device
> > + * @param name
> > + *   The stat name to retrieve
> > + * @param[out] id
> > + *   If non-NULL, the numerical id of the stat will be returned, so that further
> > + *   requests for the stat can be got using rte_eventdev_xstats_get, which will
> > + *   be faster as it doesn't need to scan a list of names for the stat.
> > + *   If the stat cannot be found, the id returned will be (unsigned)-1.
> > + * @return
> > + *   - positive value or zero: the stat value
> > + *   - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
> > + */
> > +uint64_t
> > +rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
> > +				 unsigned int *id);
> > +
> > +/**
> > + * Reset the values of the xstats of the selected component in the device.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device
> > + * @param mode
> > + *   The mode of the statistics to reset. Choose from device, queue or port.
> > + * @param queue_port_id
> > + *   The queue or port to reset. 0 and positive values select ports and queues,
> > + *   while -1 indicates all ports or queues.
> > + * @param ids
> > + *   Selects specific statistics to be reset. When NULL, all statistics selected
> > + *   by *mode* will be reset. If non-NULL, must point to array of at least
> > + *   *nb_ids* size.
> > + * @param nb_ids
> > + *   The number of ids available from the *ids* array. Ignored when ids is NULL.
> > + * @return
> > + *   - zero: successfully reset the statistics to zero
> > + *   - negative value: -EINVAL invalid parameters, -ENOTSUP if not supported.
> > + */
> > +int
> > +rte_event_dev_xstats_reset(uint8_t dev_id,
> > +			   enum rte_event_dev_xstats_mode mode,
> > +			   int16_t queue_port_id,
> > +			   const uint32_t ids[],
> > +			   uint32_t nb_ids);
> > +
> >  #ifdef __cplusplus
> >  }
> >  #endif
> > diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
> > index 828dfce..86e0076 100644
> > --- a/lib/librte_eventdev/rte_eventdev_pmd.h
> > +++ b/lib/librte_eventdev/rte_eventdev_pmd.h
> > @@ -421,6 +421,71 @@ typedef void (*eventdev_dequeue_timeout_ticks_t)(struct rte_eventdev *dev,
> >   */
> >  typedef void (*eventdev_dump_t)(struct rte_eventdev *dev, FILE *f);
> >  
> > +/**
> > + * Retrieve a set of statistics from device
> > + *
> > + * @param dev
> > + *   Event device pointer
> > + * @param ids
> > + *   The stat ids to retrieve
> > + * @param values
> > + *   The returned stat values
> > + * @param n
> > + *   The number of id values and entries in the values array
> > + * @return
> > + *   The number of stat values successfully filled into the values array
> > + */
> > +typedef int (*eventdev_xstats_get_t)(const struct rte_eventdev *dev,
> > +		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
> > +		const unsigned int ids[], uint64_t values[], unsigned int n);
> > +
> > +/**
> > + * Resets the statistic values in xstats for the device, based on mode.
> > + */
> > +typedef int (*eventdev_xstats_reset_t)(struct rte_eventdev *dev,
> > +		enum rte_event_dev_xstats_mode mode,
> > +		int16_t queue_port_id,
> > +		const uint32_t ids[],
> > +		uint32_t nb_ids);
> > +
> > +/**
> > + * Get names of extended stats of an event device
> > + *
> > + * @param dev
> > + *   Event device pointer
> > + * @param xstats_names
> > + *   Array of name values to be filled in
> > + * @param size
> > + *   Number of values in the xstats_names array
> > + * @return
> > + *   When size >= the number of stats, return the number of stat values filled
> > + *   into the array.
> > + *   When size < the number of available stats, return the number of stats
> > + *   values, and do not fill in any data into xstats_names.
> > + */
> > +typedef int (*eventdev_xstats_get_names_t)(const struct rte_eventdev *dev,
> > +		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
> > +		struct rte_event_dev_xstats_name *xstats_names,
> > +		unsigned int *ids, unsigned int size);
> > +
> > +/**
> > + * Get value of one stats and optionally return its id
> > + *
> > + * @param dev
> > + *   Event device pointer
> > + * @param name
> > + *   The name of the stat to retrieve
> > + * @param id
> > + *   Pointer to an unsigned int where we store the stat-id for future reference.
> > + *   This pointer may be null if the id is not required.
> > + * @return
> > + *   The value of the stat, or (uint64_t)-1 if the stat is not found.
> > + *   If the stat is not found, the id value will be returned as (unsigned)-1,
> > + *   if id pointer is non-NULL
> > + */
> > +typedef uint64_t (*eventdev_xstats_get_by_name)(const struct rte_eventdev *dev,
> > +		const char *name, unsigned int *id);
> > +
> >  /** Event device operations function pointer table */
> >  struct rte_eventdev_ops {
> >  	eventdev_info_get_t dev_infos_get;	/**< Get device info. */
> > @@ -451,6 +516,15 @@ struct rte_eventdev_ops {
> >  	/**< Converts ns to *timeout_ticks* value for rte_event_dequeue() */
> >  	eventdev_dump_t dump;
> >  	/* Dump internal information */
> > +
> > +	eventdev_xstats_get_t xstats_get;
> > +	/**< Get extended device statistics. */
> > +	eventdev_xstats_get_names_t xstats_get_names;
> > +	/**< Get names of extended stats. */
> > +	eventdev_xstats_get_by_name xstats_get_by_name;
> > +	/**< Get one value by name. */
> > +	eventdev_xstats_reset_t xstats_reset;
> > +	/**< Reset the statistics values in xstats. */
> >  };
> >  
> >  /**
> > diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/rte_eventdev_version.map
> > index 7a6921c..1fa6b33 100644
> > --- a/lib/librte_eventdev/rte_eventdev_version.map
> > +++ b/lib/librte_eventdev/rte_eventdev_version.map
> > @@ -12,6 +12,10 @@ DPDK_17.05 {
> >  	rte_event_dev_stop;
> >  	rte_event_dev_close;
> >  	rte_event_dev_dump;
> > +	rte_event_dev_xstats_by_name_get;
> > +	rte_event_dev_xstats_get;
> > +	rte_event_dev_xstats_names_get;
> > +	rte_event_dev_xstats_reset;
> >  
> >  	rte_event_port_default_conf_get;
> >  	rte_event_port_setup;
> > -- 
> > 2.7.4
> > 

[dpdk-dev] [PATCH v4 05/17] event/sw: add new software-only eventdev driver

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

This adds the minimal changes to allow a SW eventdev implementation to
be compiled, linked and created at run time. The eventdev does nothing,
but can be created via vdev on commandline, e.g.

  sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
  ...
  PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
  RTE>>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 config/common_base                            |   6 +
 drivers/event/Makefile                        |   1 +
 drivers/event/sw/Makefile                     |  66 ++++++++++
 drivers/event/sw/rte_pmd_evdev_sw_version.map |   3 +
 drivers/event/sw/sw_evdev.c                   | 177 ++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.h                   | 148 +++++++++++++++++++++
 mk/rte.app.mk                                 |   1 +
 7 files changed, 402 insertions(+)
 create mode 100644 drivers/event/sw/Makefile
 create mode 100644 drivers/event/sw/rte_pmd_evdev_sw_version.map
 create mode 100644 drivers/event/sw/sw_evdev.c
 create mode 100644 drivers/event/sw/sw_evdev.h

diff --git a/config/common_base b/config/common_base
index 2538f4a..fc4eb79 100644
--- a/config/common_base
+++ b/config/common_base
@@ -458,6 +458,12 @@ CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
 
 #
+# Compile PMD for software event device
+#
+CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
+CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
+
+#
 # Compile librte_ring
 #
 CONFIG_RTE_LIBRTE_RING=y
diff --git a/drivers/event/Makefile b/drivers/event/Makefile
index 678279f..353441c 100644
--- a/drivers/event/Makefile
+++ b/drivers/event/Makefile
@@ -32,5 +32,6 @@
 include $(RTE_SDK)/mk/rte.vars.mk
 
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += skeleton
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw
 
 include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
new file mode 100644
index 0000000..d6836e3
--- /dev/null
+++ b/drivers/event/sw/Makefile
@@ -0,0 +1,66 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+
+# library name
+LIB = librte_pmd_sw_event.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+# for older GCC versions, allow us to initialize an event using
+# designated initializers.
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+ifeq ($(shell test $(GCC_VERSION) -le 50 && echo 1), 1)
+CFLAGS += -Wno-missing-field-initializers
+endif
+endif
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_evdev_sw_version.map
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
+
+# export include files
+SYMLINK-y-include +=
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_eventdev
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += lib/librte_ring
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/event/sw/rte_pmd_evdev_sw_version.map b/drivers/event/sw/rte_pmd_evdev_sw_version.map
new file mode 100644
index 0000000..5352e7e
--- /dev/null
+++ b/drivers/event/sw/rte_pmd_evdev_sw_version.map
@@ -0,0 +1,3 @@
+DPDK_17.05 {
+	local: *;
+};
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
new file mode 100644
index 0000000..4de9bc1
--- /dev/null
+++ b/drivers/event/sw/sw_evdev.c
@@ -0,0 +1,177 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_vdev.h>
+#include <rte_memzone.h>
+#include <rte_kvargs.h>
+#include <rte_ring.h>
+
+#include "sw_evdev.h"
+
+#define EVENTDEV_NAME_SW_PMD event_sw
+#define NUMA_NODE_ARG "numa_node"
+#define SCHED_QUANTA_ARG "sched_quanta"
+#define CREDIT_QUANTA_ARG "credit_quanta"
+
+static int
+assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *socket_id = opaque;
+	*socket_id = atoi(value);
+	if (*socket_id > RTE_MAX_NUMA_NODES)
+		return -1;
+	return 0;
+}
+
+static int
+set_sched_quanta(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *quanta = opaque;
+	*quanta = atoi(value);
+	if (*quanta < 0 || *quanta > 4096)
+		return -1;
+	return 0;
+}
+
+static int
+set_credit_quanta(const char *key __rte_unused, const char *value, void *opaque)
+{
+	int *credit = opaque;
+	*credit = atoi(value);
+	if (*credit < 0 || *credit > 128)
+		return -1;
+	return 0;
+}
+
+static int
+sw_probe(const char *name, const char *params)
+{
+	static const struct rte_eventdev_ops evdev_sw_ops = {
+	};
+
+	static const char *const args[] = {
+		NUMA_NODE_ARG,
+		SCHED_QUANTA_ARG,
+		CREDIT_QUANTA_ARG,
+		NULL
+	};
+	struct rte_eventdev *dev;
+	struct sw_evdev *sw;
+	int socket_id = rte_socket_id();
+	int sched_quanta  = SW_DEFAULT_SCHED_QUANTA;
+	int credit_quanta = SW_DEFAULT_CREDIT_QUANTA;
+
+	if (params != NULL && params[0] != '\0') {
+		struct rte_kvargs *kvlist = rte_kvargs_parse(params, args);
+
+		if (!kvlist) {
+			SW_LOG_INFO(
+				"Ignoring unsupported parameters when creating device '%s'\n",
+				name);
+		} else {
+			int ret = rte_kvargs_process(kvlist, NUMA_NODE_ARG,
+					assign_numa_node, &socket_id);
+			if (ret != 0) {
+				SW_LOG_ERR(
+					"%s: Error parsing numa node parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			ret = rte_kvargs_process(kvlist, SCHED_QUANTA_ARG,
+					set_sched_quanta, &sched_quanta);
+			if (ret != 0) {
+				SW_LOG_ERR(
+					"%s: Error parsing sched quanta parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			ret = rte_kvargs_process(kvlist, CREDIT_QUANTA_ARG,
+					set_credit_quanta, &credit_quanta);
+			if (ret != 0) {
+				SW_LOG_ERR(
+					"%s: Error parsing credit quanta parameter",
+					name);
+				rte_kvargs_free(kvlist);
+				return ret;
+			}
+
+			rte_kvargs_free(kvlist);
+		}
+	}
+
+	SW_LOG_INFO(
+			"Creating eventdev sw device %s, numa_node=%d, sched_quanta=%d, credit_quanta=%d\n",
+			name, socket_id, sched_quanta, credit_quanta);
+
+	dev = rte_event_pmd_vdev_init(name,
+			sizeof(struct sw_evdev), socket_id);
+	if (dev == NULL) {
+		SW_LOG_ERR("eventdev vdev init() failed");
+		return -EFAULT;
+	}
+	dev->dev_ops = &evdev_sw_ops;
+
+	sw = dev->data->dev_private;
+	sw->data = dev->data;
+
+	/* copy values passed from vdev command line to instance */
+	sw->credit_update_quanta = credit_quanta;
+	sw->sched_quanta = sched_quanta;
+
+	return 0;
+}
+
+static int
+sw_remove(const char *name)
+{
+	if (name == NULL)
+		return -EINVAL;
+
+	SW_LOG_INFO("Closing eventdev sw device %s\n", name);
+
+	return rte_event_pmd_vdev_uninit(name);
+}
+
+static struct rte_vdev_driver evdev_sw_pmd_drv = {
+	.probe = sw_probe,
+	.remove = sw_remove
+};
+
+RTE_PMD_REGISTER_VDEV(EVENTDEV_NAME_SW_PMD, evdev_sw_pmd_drv);
+RTE_PMD_REGISTER_PARAM_STRING(event_sw, NUMA_NODE_ARG "=<int> "
+		SCHED_QUANTA_ARG "=<int>" CREDIT_QUANTA_ARG "=<int>");
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
new file mode 100644
index 0000000..ab315d4
--- /dev/null
+++ b/drivers/event/sw/sw_evdev.h
@@ -0,0 +1,148 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SW_EVDEV_H_
+#define _SW_EVDEV_H_
+
+#include <rte_eventdev.h>
+#include <rte_eventdev_pmd.h>
+
+#define SW_DEFAULT_CREDIT_QUANTA 32
+#define SW_DEFAULT_SCHED_QUANTA 128
+#define SW_QID_NUM_FIDS 16384
+#define SW_IQS_MAX 4
+#define SW_Q_PRIORITY_MAX 255
+#define SW_PORTS_MAX 64
+#define MAX_SW_CONS_Q_DEPTH 128
+#define SW_INFLIGHT_EVENTS_TOTAL 4096
+/* allow for lots of over-provisioning */
+#define MAX_SW_PROD_Q_DEPTH 4096
+#define SW_FRAGMENTS_MAX 16
+
+#define EVENTDEV_NAME_SW_PMD event_sw
+#define SW_PMD_NAME RTE_STR(event_sw)
+
+#ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
+#define SW_LOG_INFO(fmt, args...) \
+	RTE_LOG(INFO, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
+			SW_PMD_NAME, \
+			__func__, __LINE__, ## args)
+
+#define SW_LOG_DBG(fmt, args...) \
+	RTE_LOG(DEBUG, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
+			SW_PMD_NAME, \
+			__func__, __LINE__, ## args)
+#else
+#define SW_LOG_INFO(fmt, args...)
+#define SW_LOG_DBG(fmt, args...)
+#endif
+
+#define SW_LOG_ERR(fmt, args...) \
+	RTE_LOG(ERR, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
+			SW_PMD_NAME, \
+			__func__, __LINE__, ## args)
+
+/* Records basic event stats at a given point. Used in port and qid structs */
+struct sw_point_stats {
+	uint64_t rx_pkts;
+	uint64_t rx_dropped;
+	uint64_t tx_pkts;
+};
+
+/* structure used to track what port a flow (FID) is pinned to */
+struct sw_fid_t {
+	/* which CQ this FID is currently pinned to */
+	int32_t cq;
+	/* number of packets gone to the CQ with this FID */
+	uint32_t pcount;
+};
+
+struct reorder_buffer_entry {
+	uint16_t num_fragments;		/**< Number of packet fragments */
+	uint16_t fragment_index;	/**< Points to the oldest valid frag */
+	uint8_t ready;			/**< Entry is ready to be reordered */
+	struct rte_event fragments[SW_FRAGMENTS_MAX];
+};
+
+struct sw_qid {
+	/* set when the QID has been initialized */
+	uint8_t initialized;
+	/* The type of this QID */
+	int8_t type;
+	/* Integer ID representing the queue. This is used in history lists,
+	 * to identify the stage of processing.
+	 */
+	uint32_t id;
+	struct sw_point_stats stats;
+
+	/* Internal priority rings for packets */
+	struct iq_ring *iq[SW_IQS_MAX];
+	uint32_t iq_pkt_mask; /* A mask to indicate packets in an IQ */
+	uint64_t iq_pkt_count[SW_IQS_MAX];
+
+	/* Information on what CQs are polling this IQ */
+	uint32_t cq_num_mapped_cqs;
+	uint32_t cq_next_tx; /* cq to write next (non-atomic) packet */
+	uint32_t cq_map[SW_PORTS_MAX];
+
+	/* Track flow ids for atomic load balancing */
+	struct sw_fid_t fids[SW_QID_NUM_FIDS];
+
+	/* Track packet order for reordering when needed */
+	struct reorder_buffer_entry *reorder_buffer; /*< pkts await reorder */
+	struct rte_ring *reorder_buffer_freelist; /* available reorder slots */
+	uint32_t reorder_buffer_index; /* oldest valid reorder buffer entry */
+	uint32_t window_size;          /* Used to wrap reorder_buffer_index */
+
+	uint8_t priority;
+};
+
+struct sw_evdev {
+	struct rte_eventdev_data *data;
+
+	int32_t sched_quanta;
+	uint32_t credit_update_quanta;
+};
+
+static inline struct sw_evdev *
+sw_pmd_priv(const struct rte_eventdev *eventdev)
+{
+	return eventdev->data->dev_private;
+}
+
+static inline const struct sw_evdev *
+sw_pmd_priv_const(const struct rte_eventdev *eventdev)
+{
+	return eventdev->data->dev_private;
+}
+
+#endif /* _SW_EVDEV_H_ */
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 3897e2e..c4097ee 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -154,6 +154,7 @@ endif # CONFIG_RTE_LIBRTE_CRYPTODEV
 
 ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += -lrte_pmd_skeleton_event
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += -lrte_pmd_sw_event
 endif # CONFIG_RTE_LIBRTE_EVENTDEV
 
 endif # !CONFIG_RTE_BUILD_SHARED_LIBS
-- 
2.7.4

[dpdk-dev] [PATCH v4 06/17] event/sw: add device capabilities function

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the info_get function to return details on the queues, flow,
prioritization capabilities, etc. that this device has.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 4de9bc1..9d8517a 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,28 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
+{
+	RTE_SET_USED(dev);
+
+	static const struct rte_event_dev_info evdev_sw_info = {
+			.driver_name = SW_PMD_NAME,
+			.max_event_queues = RTE_EVENT_MAX_QUEUES_PER_DEV,
+			.max_event_queue_flows = SW_QID_NUM_FIDS,
+			.max_event_queue_priority_levels = SW_Q_PRIORITY_MAX,
+			.max_event_priority_levels = SW_IQS_MAX,
+			.max_event_ports = SW_PORTS_MAX,
+			.max_event_port_dequeue_depth = MAX_SW_CONS_Q_DEPTH,
+			.max_event_port_enqueue_depth = MAX_SW_PROD_Q_DEPTH,
+			.max_num_events = SW_INFLIGHT_EVENTS_TOTAL,
+			.event_dev_cap = (RTE_EVENT_DEV_CAP_QUEUE_QOS |
+					RTE_EVENT_DEV_CAP_EVENT_QOS),
+	};
+
+	*info = evdev_sw_info;
+}
+
 static int
 assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
 {
@@ -78,6 +100,7 @@ static int
 sw_probe(const char *name, const char *params)
 {
 	static const struct rte_eventdev_ops evdev_sw_ops = {
+			.dev_infos_get = sw_info_get,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

[dpdk-dev] [PATCH v4 07/17] event/sw: add configure function

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 15 +++++++++++++++
 drivers/event/sw/sw_evdev.h | 11 +++++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 9d8517a..28a2326 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,20 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static int
+sw_dev_configure(const struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	const struct rte_eventdev_data *data = dev->data;
+	const struct rte_event_dev_config *conf = &data->dev_conf;
+
+	sw->qid_count = conf->nb_event_queues;
+	sw->port_count = conf->nb_event_ports;
+	sw->nb_events_limit = conf->nb_events_limit;
+
+	return 0;
+}
+
 static void
 sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 {
@@ -100,6 +114,7 @@ static int
 sw_probe(const char *name, const char *params)
 {
 	static const struct rte_eventdev_ops evdev_sw_ops = {
+			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
 	};
 
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index ab315d4..fda57df 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -35,6 +35,7 @@
 
 #include <rte_eventdev.h>
 #include <rte_eventdev_pmd.h>
+#include <rte_atomic.h>
 
 #define SW_DEFAULT_CREDIT_QUANTA 32
 #define SW_DEFAULT_SCHED_QUANTA 128
@@ -129,7 +130,17 @@ struct sw_qid {
 struct sw_evdev {
 	struct rte_eventdev_data *data;
 
+	uint32_t port_count;
+	uint32_t qid_count;
+
+	/*
+	 * max events in this instance. Cached here for performance.
+	 * (also available in data->conf.nb_events_limit)
+	 */
+	uint32_t nb_events_limit;
+
 	int32_t sched_quanta;
+
 	uint32_t credit_update_quanta;
 };
 
-- 
2.7.4

[dpdk-dev] [PATCH v4 08/17] event/sw: add fns to return default port/queue config

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 drivers/event/sw/sw_evdev.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 28a2326..d1fa3a7 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -44,6 +44,35 @@
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_queue_def_conf(struct rte_eventdev *dev, uint8_t queue_id,
+				 struct rte_event_queue_conf *conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(queue_id);
+
+	static const struct rte_event_queue_conf default_conf = {
+		.nb_atomic_flows = 4096,
+		.nb_atomic_order_sequences = 1,
+		.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+		.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+	};
+
+	*conf = default_conf;
+}
+
+static void
+sw_port_def_conf(struct rte_eventdev *dev, uint8_t port_id,
+		 struct rte_event_port_conf *port_conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(port_id);
+
+	port_conf->new_event_threshold = 1024;
+	port_conf->dequeue_depth = 16;
+	port_conf->enqueue_depth = 16;
+}
+
 static int
 sw_dev_configure(const struct rte_eventdev *dev)
 {
@@ -116,6 +145,9 @@ sw_probe(const char *name, const char *params)
 	static const struct rte_eventdev_ops evdev_sw_ops = {
 			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
+
+			.queue_def_conf = sw_queue_def_conf,
+			.port_def_conf = sw_port_def_conf,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

[dpdk-dev] [PATCH v4 09/17] event/sw: add support for event queues

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the data structures for the event queues, and the eventdev
functions to create and destroy those queues.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

---

v3 -> v4:
- return -ENOTSUP for CFG_ALL_TYPES, as it is not supported
- fix bug when reordered queue is re-configured for second time
---
 drivers/event/sw/iq_ring.h  | 176 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.c | 166 +++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.h |   5 ++
 3 files changed, 347 insertions(+)
 create mode 100644 drivers/event/sw/iq_ring.h

diff --git a/drivers/event/sw/iq_ring.h b/drivers/event/sw/iq_ring.h
new file mode 100644
index 0000000..d480d15
--- /dev/null
+++ b/drivers/event/sw/iq_ring.h
@@ -0,0 +1,176 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Ring structure definitions used for the internal ring buffers of the
+ * SW eventdev implementation. These are designed for single-core use only.
+ */
+#ifndef _IQ_RING_
+#define _IQ_RING_
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_eventdev.h>
+
+#define IQ_RING_NAMESIZE 12
+#define QID_IQ_DEPTH 512
+#define QID_IQ_MASK (uint16_t)(QID_IQ_DEPTH - 1)
+
+struct iq_ring {
+	char name[IQ_RING_NAMESIZE] __rte_cache_aligned;
+	uint16_t write_idx;
+	uint16_t read_idx;
+
+	struct rte_event ring[QID_IQ_DEPTH];
+};
+
+#ifndef force_inline
+#define force_inline inline __attribute__((always_inline))
+#endif
+
+static inline struct iq_ring *
+iq_ring_create(const char *name, unsigned int socket_id)
+{
+	struct iq_ring *retval;
+
+	retval = rte_malloc_socket(NULL, sizeof(*retval), 0, socket_id);
+	if (retval == NULL)
+		goto end;
+
+	snprintf(retval->name, sizeof(retval->name), "%s", name);
+	retval->write_idx = retval->read_idx = 0;
+end:
+	return retval;
+}
+
+static inline void
+iq_ring_destroy(struct iq_ring *r)
+{
+	rte_free(r);
+}
+
+static force_inline uint16_t
+iq_ring_count(const struct iq_ring *r)
+{
+	return r->write_idx - r->read_idx;
+}
+
+static force_inline uint16_t
+iq_ring_free_count(const struct iq_ring *r)
+{
+	return QID_IQ_MASK - iq_ring_count(r);
+}
+
+static force_inline uint16_t
+iq_ring_enqueue_burst(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	const uint16_t read = r->read_idx;
+	uint16_t write = r->write_idx;
+	const uint16_t space = read + QID_IQ_MASK - write;
+	uint16_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++)
+		r->ring[write & QID_IQ_MASK] = qes[i];
+
+	r->write_idx = write;
+
+	return nb_qes;
+}
+
+static force_inline uint16_t
+iq_ring_dequeue_burst(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	uint16_t read = r->read_idx;
+	const uint16_t write = r->write_idx;
+	const uint16_t items = write - read;
+	uint16_t i;
+
+	for (i = 0; i < nb_qes; i++, read++)
+		qes[i] = r->ring[read & QID_IQ_MASK];
+
+	if (items < nb_qes)
+		nb_qes = items;
+
+	r->read_idx += nb_qes;
+
+	return nb_qes;
+}
+
+/* assumes there is space, from a previous dequeue_burst */
+static force_inline uint16_t
+iq_ring_put_back(struct iq_ring *r, struct rte_event *qes, uint16_t nb_qes)
+{
+	uint16_t i, read = r->read_idx;
+
+	for (i = nb_qes; i-- > 0; )
+		r->ring[--read & QID_IQ_MASK] = qes[i];
+
+	r->read_idx = read;
+	return nb_qes;
+}
+
+static force_inline const struct rte_event *
+iq_ring_peek(const struct iq_ring *r)
+{
+	return &r->ring[r->read_idx & QID_IQ_MASK];
+}
+
+static force_inline void
+iq_ring_pop(struct iq_ring *r)
+{
+	r->read_idx++;
+}
+
+static force_inline int
+iq_ring_enqueue(struct iq_ring *r, const struct rte_event *qe)
+{
+	const uint16_t read = r->read_idx;
+	const uint16_t write = r->write_idx;
+	const uint16_t space = read + QID_IQ_MASK - write;
+
+	if (space == 0)
+		return -1;
+
+	r->ring[write & QID_IQ_MASK] = *qe;
+
+	r->write_idx = write + 1;
+
+	return 0;
+}
+
+#endif
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index d1fa3a7..eaf8e77 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -38,12 +38,176 @@
 #include <rte_ring.h>
 
 #include "sw_evdev.h"
+#include "iq_ring.h"
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define NUMA_NODE_ARG "numa_node"
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static int32_t
+qid_init(struct sw_evdev *sw, unsigned int idx, int type,
+		const struct rte_event_queue_conf *queue_conf)
+{
+	unsigned int i;
+	int dev_id = sw->data->dev_id;
+	int socket_id = sw->data->socket_id;
+	char buf[IQ_RING_NAMESIZE];
+	struct sw_qid *qid = &sw->qids[idx];
+
+	for (i = 0; i < SW_IQS_MAX; i++) {
+		snprintf(buf, sizeof(buf), "q_%u_iq_%d", idx, i);
+		qid->iq[i] = iq_ring_create(buf, socket_id);
+		if (!qid->iq[i]) {
+			SW_LOG_DBG("ring create failed");
+			goto cleanup;
+		}
+	}
+
+	/* Initialize the FID structures to no pinning (-1), and zero packets */
+	const struct sw_fid_t fid = {.cq = -1, .pcount = 0};
+	for (i = 0; i < RTE_DIM(qid->fids); i++)
+		qid->fids[i] = fid;
+
+	qid->id = idx;
+	qid->type = type;
+	qid->priority = queue_conf->priority;
+
+	if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+		char ring_name[RTE_RING_NAMESIZE];
+		uint32_t window_size;
+
+		/* rte_ring and window_size_mask require require window_size to
+		 * be a power-of-2.
+		 */
+		window_size = rte_align32pow2(
+				queue_conf->nb_atomic_order_sequences);
+
+		qid->window_size = window_size - 1;
+
+		if (!window_size) {
+			SW_LOG_DBG(
+				"invalid reorder_window_size for ordered queue\n"
+				);
+			goto cleanup;
+		}
+
+		snprintf(buf, sizeof(buf), "sw%d_iq_%d_rob", dev_id, i);
+		qid->reorder_buffer = rte_zmalloc_socket(buf,
+				window_size * sizeof(qid->reorder_buffer[0]),
+				0, socket_id);
+		if (!qid->reorder_buffer) {
+			SW_LOG_DBG("reorder_buffer malloc failed\n");
+			goto cleanup;
+		}
+
+		memset(&qid->reorder_buffer[0],
+		       0,
+		       window_size * sizeof(qid->reorder_buffer[0]));
+
+		snprintf(ring_name, sizeof(ring_name), "sw%d_q%d_freelist",
+				dev_id, idx);
+
+		/* lookup the ring, and if it already exists, free it */
+		struct rte_ring *cleanup = rte_ring_lookup(ring_name);
+		if (cleanup)
+			rte_ring_free(cleanup);
+
+		qid->reorder_buffer_freelist = rte_ring_create(ring_name,
+				window_size,
+				socket_id,
+				RING_F_SP_ENQ | RING_F_SC_DEQ);
+		if (!qid->reorder_buffer_freelist) {
+			SW_LOG_DBG("freelist ring create failed");
+			goto cleanup;
+		}
+
+		/* Populate the freelist with reorder buffer entries. Enqueue
+		 * 'window_size - 1' entries because the rte_ring holds only
+		 * that many.
+		 */
+		for (i = 0; i < window_size - 1; i++) {
+			if (rte_ring_sp_enqueue(qid->reorder_buffer_freelist,
+						&qid->reorder_buffer[i]) < 0)
+				goto cleanup;
+		}
+
+		qid->reorder_buffer_index = 0;
+		qid->cq_next_tx = 0;
+	}
+
+	qid->initialized = 1;
+
+	return 0;
+
+cleanup:
+	for (i = 0; i < SW_IQS_MAX; i++) {
+		if (qid->iq[i])
+			iq_ring_destroy(qid->iq[i]);
+	}
+
+	if (qid->reorder_buffer) {
+		rte_free(qid->reorder_buffer);
+		qid->reorder_buffer = NULL;
+	}
+
+	if (qid->reorder_buffer_freelist) {
+		rte_ring_free(qid->reorder_buffer_freelist);
+		qid->reorder_buffer_freelist = NULL;
+	}
+
+	return -EINVAL;
+}
+
+static int
+sw_queue_setup(struct rte_eventdev *dev, uint8_t queue_id,
+		const struct rte_event_queue_conf *conf)
+{
+	int type;
+
+	switch (conf->event_queue_cfg) {
+	case RTE_EVENT_QUEUE_CFG_SINGLE_LINK:
+		type = SW_SCHED_TYPE_DIRECT;
+		break;
+	case RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY:
+		type = RTE_SCHED_TYPE_ATOMIC;
+		break;
+	case RTE_EVENT_QUEUE_CFG_ORDERED_ONLY:
+		type = RTE_SCHED_TYPE_ORDERED;
+		break;
+	case RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY:
+		type = RTE_SCHED_TYPE_PARALLEL;
+		break;
+	case RTE_EVENT_QUEUE_CFG_ALL_TYPES:
+		SW_LOG_ERR("QUEUE_CFG_ALL_TYPES not supported\n");
+		return -ENOTSUP;
+	default:
+		SW_LOG_ERR("Unknown queue type %d requested\n",
+			   conf->event_queue_cfg);
+		return -EINVAL;
+	}
+
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	return qid_init(sw, queue_id, type, conf);
+}
+
+static void
+sw_queue_release(struct rte_eventdev *dev, uint8_t id)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	struct sw_qid *qid = &sw->qids[id];
+	uint32_t i;
+
+	for (i = 0; i < SW_IQS_MAX; i++)
+		iq_ring_destroy(qid->iq[i]);
+
+	if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+		rte_free(qid->reorder_buffer);
+		rte_ring_free(qid->reorder_buffer_freelist);
+	}
+	memset(qid, 0, sizeof(*qid));
+}
+
 static void
 sw_queue_def_conf(struct rte_eventdev *dev, uint8_t queue_id,
 				 struct rte_event_queue_conf *conf)
@@ -147,6 +311,8 @@ sw_probe(const char *name, const char *params)
 			.dev_infos_get = sw_info_get,
 
 			.queue_def_conf = sw_queue_def_conf,
+			.queue_setup = sw_queue_setup,
+			.queue_release = sw_queue_release,
 			.port_def_conf = sw_port_def_conf,
 	};
 
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index fda57df..ddf0cd2 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -52,6 +52,8 @@
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define SW_PMD_NAME RTE_STR(event_sw)
 
+#define SW_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
+
 #ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
 #define SW_LOG_INFO(fmt, args...) \
 	RTE_LOG(INFO, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
@@ -139,6 +141,9 @@ struct sw_evdev {
 	 */
 	uint32_t nb_events_limit;
 
+	/* Internal queues - one per logical queue */
+	struct sw_qid qids[RTE_EVENT_MAX_QUEUES_PER_DEV] __rte_cache_aligned;
+
 	int32_t sched_quanta;
 
 	uint32_t credit_update_quanta;
-- 
2.7.4

[dpdk-dev] [PATCH v4 10/17] event/sw: add support for event ports

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the data-structures for the ports used by workers to send
packets to/from the scheduler. Also add in the functions to
create/destroy those ports.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

---

v3 -> v4:
- fix port leaking credits on reconfigure
---
 drivers/event/sw/event_ring.h | 185 ++++++++++++++++++++++++++++++++++++++++++
 drivers/event/sw/sw_evdev.c   |  88 ++++++++++++++++++++
 drivers/event/sw/sw_evdev.h   |  78 ++++++++++++++++++
 3 files changed, 351 insertions(+)
 create mode 100644 drivers/event/sw/event_ring.h

diff --git a/drivers/event/sw/event_ring.h b/drivers/event/sw/event_ring.h
new file mode 100644
index 0000000..cdaee95
--- /dev/null
+++ b/drivers/event/sw/event_ring.h
@@ -0,0 +1,185 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Generic ring structure for passing events from one core to another.
+ *
+ * Used by the software scheduler for the producer and consumer rings for
+ * each port, i.e. for passing events from worker cores to scheduler and
+ * vice-versa. Designed for single-producer, single-consumer use with two
+ * cores working on each ring.
+ */
+
+#ifndef _EVENT_RING_
+#define _EVENT_RING_
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+
+#define QE_RING_NAMESIZE 32
+
+struct qe_ring {
+	char name[QE_RING_NAMESIZE] __rte_cache_aligned;
+	uint32_t ring_size; /* size of memory block allocated to the ring */
+	uint32_t mask;      /* mask for read/write values == ring_size -1 */
+	uint32_t size;      /* actual usable space in the ring */
+	volatile uint32_t write_idx __rte_cache_aligned;
+	volatile uint32_t read_idx __rte_cache_aligned;
+
+	struct rte_event ring[0] __rte_cache_aligned;
+};
+
+#ifndef force_inline
+#define force_inline inline __attribute__((always_inline))
+#endif
+
+static inline struct qe_ring *
+qe_ring_create(const char *name, unsigned int size, unsigned int socket_id)
+{
+	struct qe_ring *retval;
+	const uint32_t ring_size = rte_align32pow2(size + 1);
+	size_t memsize = sizeof(*retval) +
+			(ring_size * sizeof(retval->ring[0]));
+
+	retval = rte_zmalloc_socket(NULL, memsize, 0, socket_id);
+	if (retval == NULL)
+		goto end;
+
+	snprintf(retval->name, sizeof(retval->name), "EVDEV_RG_%s", name);
+	retval->ring_size = ring_size;
+	retval->mask = ring_size - 1;
+	retval->size = size;
+end:
+	return retval;
+}
+
+static inline void
+qe_ring_destroy(struct qe_ring *r)
+{
+	rte_free(r);
+}
+
+static force_inline unsigned int
+qe_ring_count(const struct qe_ring *r)
+{
+	return r->write_idx - r->read_idx;
+}
+
+static force_inline unsigned int
+qe_ring_free_count(const struct qe_ring *r)
+{
+	return r->size - qe_ring_count(r);
+}
+
+static force_inline unsigned int
+qe_ring_enqueue_burst(struct qe_ring *r, const struct rte_event *qes,
+		unsigned int nb_qes, uint16_t *free_count)
+{
+	const uint32_t size = r->size;
+	const uint32_t mask = r->mask;
+	const uint32_t read = r->read_idx;
+	uint32_t write = r->write_idx;
+	const uint32_t space = read + size - write;
+	uint32_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++)
+		r->ring[write & mask] = qes[i];
+
+	rte_smp_wmb();
+
+	if (nb_qes != 0)
+		r->write_idx = write;
+
+	*free_count = space - nb_qes;
+
+	return nb_qes;
+}
+
+static force_inline unsigned int
+qe_ring_enqueue_burst_with_ops(struct qe_ring *r, const struct rte_event *qes,
+		unsigned int nb_qes, uint8_t *ops)
+{
+	const uint32_t size = r->size;
+	const uint32_t mask = r->mask;
+	const uint32_t read = r->read_idx;
+	uint32_t write = r->write_idx;
+	const uint32_t space = read + size - write;
+	uint32_t i;
+
+	if (space < nb_qes)
+		nb_qes = space;
+
+	for (i = 0; i < nb_qes; i++, write++) {
+		r->ring[write & mask] = qes[i];
+		r->ring[write & mask].op = ops[i];
+	}
+
+	rte_smp_wmb();
+
+	if (nb_qes != 0)
+		r->write_idx = write;
+
+	return nb_qes;
+}
+
+static force_inline unsigned int
+qe_ring_dequeue_burst(struct qe_ring *r, struct rte_event *qes,
+		unsigned int nb_qes)
+{
+	const uint32_t mask = r->mask;
+	uint32_t read = r->read_idx;
+	const uint32_t write = r->write_idx;
+	const uint32_t items = write - read;
+	uint32_t i;
+
+	if (items < nb_qes)
+		nb_qes = items;
+
+
+	for (i = 0; i < nb_qes; i++, read++)
+		qes[i] = r->ring[read & mask];
+
+	rte_smp_rmb();
+
+	if (nb_qes != 0)
+		r->read_idx += nb_qes;
+
+	return nb_qes;
+}
+
+#endif
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index eaf8e77..4b8370d 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -39,12 +39,98 @@
 
 #include "sw_evdev.h"
 #include "iq_ring.h"
+#include "event_ring.h"
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define NUMA_NODE_ARG "numa_node"
 #define SCHED_QUANTA_ARG "sched_quanta"
 #define CREDIT_QUANTA_ARG "credit_quanta"
 
+static void
+sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info);
+
+static int
+sw_port_setup(struct rte_eventdev *dev, uint8_t port_id,
+		const struct rte_event_port_conf *conf)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	struct sw_port *p = &sw->ports[port_id];
+	char buf[QE_RING_NAMESIZE];
+	unsigned int i;
+
+	struct rte_event_dev_info info;
+	sw_info_get(dev, &info);
+
+	uint8_t enq_oversize =
+		conf->enqueue_depth > info.max_event_port_enqueue_depth;
+	uint8_t deq_oversize =
+		conf->dequeue_depth > info.max_event_port_dequeue_depth;
+	if (enq_oversize || deq_oversize)
+		return -EINVAL;
+
+
+	/* detect re-configuring and return credits to instance if needed */
+	if (p->initialized) {
+		/* taking credits from pool is done one quanta at a time, and
+		 * credits may be spend (counted in p->inflights) or still
+		 * available in the port (p->inflight_credits). We must return
+		 * the sum to no leak credits
+		 */
+		int possible_inflights = p->inflight_credits + p->inflights;
+		rte_atomic32_sub(&sw->inflights, possible_inflights);
+	}
+
+	*p = (struct sw_port){0}; /* zero entire structure */
+	p->id = port_id;
+	p->sw = sw;
+
+	snprintf(buf, sizeof(buf), "sw%d_%s", dev->data->dev_id,
+			"rx_worker_ring");
+	p->rx_worker_ring = qe_ring_create(buf, MAX_SW_PROD_Q_DEPTH,
+			dev->data->socket_id);
+	if (p->rx_worker_ring == NULL) {
+		printf("%s %d: error creating RX worker ring\n",
+				__func__, __LINE__);
+		return -1;
+	}
+
+	p->inflight_max = conf->new_event_threshold;
+
+	snprintf(buf, sizeof(buf), "sw%d_%s", dev->data->dev_id,
+			"cq_worker_ring");
+	p->cq_worker_ring = qe_ring_create(buf, conf->dequeue_depth,
+			dev->data->socket_id);
+	if (p->cq_worker_ring == NULL) {
+		qe_ring_destroy(p->rx_worker_ring);
+		printf("%s %d: error creating CQ worker ring\n",
+				__func__, __LINE__);
+		return -1;
+	}
+	sw->cq_ring_space[port_id] = conf->dequeue_depth;
+
+	/* set hist list contents to empty */
+	for (i = 0; i < SW_PORT_HIST_LIST; i++) {
+		p->hist_list[i].fid = -1;
+		p->hist_list[i].qid = -1;
+	}
+	dev->data->ports[port_id] = p;
+	p->initialized = 1;
+
+	return 0;
+}
+
+static void
+sw_port_release(void *port)
+{
+	struct sw_port *p = (void *)port;
+	if (p == NULL)
+		return;
+
+	qe_ring_destroy(p->rx_worker_ring);
+	qe_ring_destroy(p->cq_worker_ring);
+	memset(p, 0, sizeof(*p));
+}
+
 static int32_t
 qid_init(struct sw_evdev *sw, unsigned int idx, int type,
 		const struct rte_event_queue_conf *queue_conf)
@@ -314,6 +400,8 @@ sw_probe(const char *name, const char *params)
 			.queue_setup = sw_queue_setup,
 			.queue_release = sw_queue_release,
 			.port_def_conf = sw_port_def_conf,
+			.port_setup = sw_port_setup,
+			.port_release = sw_port_release,
 	};
 
 	static const char *const args[] = {
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index ddf0cd2..1bedd63 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -49,6 +49,13 @@
 #define MAX_SW_PROD_Q_DEPTH 4096
 #define SW_FRAGMENTS_MAX 16
 
+/* report dequeue burst sizes in buckets */
+#define SW_DEQ_STAT_BUCKET_SHIFT 2
+/* how many packets pulled from port by sched */
+#define SCHED_DEQUEUE_BURST_SIZE 32
+
+#define SW_PORT_HIST_LIST (MAX_SW_PROD_Q_DEPTH) /* size of our history list */
+
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define SW_PMD_NAME RTE_STR(event_sw)
 
@@ -129,12 +136,80 @@ struct sw_qid {
 	uint8_t priority;
 };
 
+struct sw_hist_list_entry {
+	int32_t qid;
+	int32_t fid;
+	struct reorder_buffer_entry *rob_entry;
+};
+
+struct sw_evdev;
+
+struct sw_port {
+	/* new enqueue / dequeue API doesn't have an instance pointer, only the
+	 * pointer to the port being enqueue/dequeued from
+	 */
+	struct sw_evdev *sw;
+
+	/* set when the port is initialized */
+	uint8_t initialized;
+	/* A numeric ID for the port */
+	uint8_t id;
+
+	int16_t is_directed; /** Takes from a single directed QID */
+	/**
+	 * For loadbalanced we can optimise pulling packets from
+	 * producers if there is no reordering involved
+	 */
+	int16_t num_ordered_qids;
+
+	/** Ring and buffer for pulling events from workers for scheduling */
+	struct qe_ring *rx_worker_ring __rte_cache_aligned;
+	/** Ring and buffer for pushing packets to workers after scheduling */
+	struct qe_ring *cq_worker_ring;
+
+	/* hole */
+
+	/* num releases yet to be completed on this port */
+	uint16_t outstanding_releases __rte_cache_aligned;
+	uint16_t inflight_max; /* app requested max inflights for this port */
+	uint16_t inflight_credits; /* num credits this port has right now */
+
+	uint16_t last_dequeue_burst_sz; /* how big the burst was */
+	uint64_t last_dequeue_ticks; /* used to track burst processing time */
+	uint64_t avg_pkt_ticks;      /* tracks average over NUM_SAMPLES burst */
+	uint64_t total_polls;        /* how many polls were counted in stats */
+	uint64_t zero_polls;         /* tracks polls returning nothing */
+	uint32_t poll_buckets[MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT];
+		/* bucket values in 4s for shorter reporting */
+
+	/* History list structs, containing info on pkts egressed to worker */
+	uint16_t hist_head __rte_cache_aligned;
+	uint16_t hist_tail;
+	uint16_t inflights;
+	struct sw_hist_list_entry hist_list[SW_PORT_HIST_LIST];
+
+	/* track packets in and out of this port */
+	struct sw_point_stats stats;
+
+
+	uint32_t pp_buf_start;
+	uint32_t pp_buf_count;
+	uint16_t cq_buf_count;
+	struct rte_event pp_buf[SCHED_DEQUEUE_BURST_SIZE];
+	struct rte_event cq_buf[MAX_SW_CONS_Q_DEPTH];
+
+	uint8_t num_qids_mapped;
+};
+
 struct sw_evdev {
 	struct rte_eventdev_data *data;
 
 	uint32_t port_count;
 	uint32_t qid_count;
 
+	/* Contains all ports - load balanced and directed */
+	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
+
 	/*
 	 * max events in this instance. Cached here for performance.
 	 * (also available in data->conf.nb_events_limit)
@@ -144,6 +219,9 @@ struct sw_evdev {
 	/* Internal queues - one per logical queue */
 	struct sw_qid qids[RTE_EVENT_MAX_QUEUES_PER_DEV] __rte_cache_aligned;
 
+	/* Cache how many packets are in each cq */
+	uint16_t cq_ring_space[SW_PORTS_MAX] __rte_cache_aligned;
+
 	int32_t sched_quanta;
 
 	uint32_t credit_update_quanta;
-- 
2.7.4

[dpdk-dev] [PATCH v4 11/17] event/sw: add support for linking queues to ports

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

---

v3 -> v4
- fix port ordered qid count by adding decrement in unlink()
- fix port queue unlink count to allow reconfig from lb to single link
---
 drivers/event/sw/sw_evdev.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 4b8370d..82ac3bd 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -36,6 +36,7 @@
 #include <rte_memzone.h>
 #include <rte_kvargs.h>
 #include <rte_ring.h>
+#include <rte_errno.h>
 
 #include "sw_evdev.h"
 #include "iq_ring.h"
@@ -50,6 +51,84 @@ static void
 sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info);
 
 static int
+sw_port_link(struct rte_eventdev *dev, void *port, const uint8_t queues[],
+		const uint8_t priorities[], uint16_t num)
+{
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	int i;
+
+	RTE_SET_USED(priorities);
+	for (i = 0; i < num; i++) {
+		struct sw_qid *q = &sw->qids[queues[i]];
+
+		/* check for qid map overflow */
+		if (q->cq_num_mapped_cqs >= RTE_DIM(q->cq_map))
+			break;
+
+		if (p->is_directed && p->num_qids_mapped > 0)
+			break;
+
+		if (q->type == SW_SCHED_TYPE_DIRECT) {
+			/* check directed qids only map to one port */
+			if (p->num_qids_mapped > 0) {
+				rte_errno = -EDQUOT;
+				break;
+			}
+			/* check port only takes a directed flow */
+			if (num > 1) {
+				rte_errno = -EDQUOT;
+				break;
+			}
+
+			p->is_directed = 1;
+			p->num_qids_mapped = 1;
+		} else if (q->type == RTE_SCHED_TYPE_ORDERED) {
+			p->num_ordered_qids++;
+			p->num_qids_mapped++;
+		} else if (q->type == RTE_SCHED_TYPE_ATOMIC) {
+			p->num_qids_mapped++;
+		}
+
+		q->cq_map[q->cq_num_mapped_cqs] = p->id;
+		rte_smp_wmb();
+		q->cq_num_mapped_cqs++;
+	}
+	return i;
+}
+
+static int
+sw_port_unlink(struct rte_eventdev *dev, void *port, uint8_t queues[],
+		uint16_t nb_unlinks)
+{
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	unsigned int i, j;
+
+	int unlinked = 0;
+	for (i = 0; i < nb_unlinks; i++) {
+		struct sw_qid *q = &sw->qids[queues[i]];
+		for (j = 0; j < q->cq_num_mapped_cqs; j++) {
+			if (q->cq_map[j] == p->id) {
+				q->cq_map[j] =
+					q->cq_map[q->cq_num_mapped_cqs - 1];
+				rte_smp_wmb();
+				q->cq_num_mapped_cqs--;
+				unlinked++;
+
+				p->num_qids_mapped--;
+
+				if (q->type == RTE_SCHED_TYPE_ORDERED)
+					p->num_ordered_qids--;
+
+				continue;
+			}
+		}
+	}
+	return unlinked;
+}
+
+static int
 sw_port_setup(struct rte_eventdev *dev, uint8_t port_id,
 		const struct rte_event_port_conf *conf)
 {
@@ -402,6 +481,8 @@ sw_probe(const char *name, const char *params)
 			.port_def_conf = sw_port_def_conf,
 			.port_setup = sw_port_setup,
 			.port_release = sw_port_release,
+			.port_link = sw_port_link,
+			.port_unlink = sw_port_unlink,
 	};
 
 	static const char *const args[] = {
-- 
2.7.4

[dpdk-dev] [PATCH v4 12/17] event/sw: add worker core functions

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

add the event enqueue, dequeue and release functions to the eventdev.
These also include tracking of stats for observability in the load of
the scheduler.
Internally in the enqueue function, the various types of enqueue
operations, to forward an existing event, to send a new event, to
drop a previous event, are converted to a series of flags which will
be used by the scheduler code to perform the needed actions for that
event.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile          |   1 +
 drivers/event/sw/sw_evdev.c        |   5 +
 drivers/event/sw/sw_evdev.h        |  34 +++++++
 drivers/event/sw/sw_evdev_worker.c | 188 +++++++++++++++++++++++++++++++++++++
 4 files changed, 228 insertions(+)
 create mode 100644 drivers/event/sw/sw_evdev_worker.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index d6836e3..b6ecd91 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -53,6 +53,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 82ac3bd..9b2816d 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -412,6 +412,7 @@ sw_dev_configure(const struct rte_eventdev *dev)
 	sw->qid_count = conf->nb_event_queues;
 	sw->port_count = conf->nb_event_ports;
 	sw->nb_events_limit = conf->nb_events_limit;
+	rte_atomic32_set(&sw->inflights, 0);
 
 	return 0;
 }
@@ -550,6 +551,10 @@ sw_probe(const char *name, const char *params)
 		return -EFAULT;
 	}
 	dev->dev_ops = &evdev_sw_ops;
+	dev->enqueue = sw_event_enqueue;
+	dev->enqueue_burst = sw_event_enqueue_burst;
+	dev->dequeue = sw_event_dequeue;
+	dev->dequeue_burst = sw_event_dequeue_burst;
 
 	sw = dev->data->dev_private;
 	sw->data = dev->data;
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 1bedd63..ab372fd 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -55,12 +55,36 @@
 #define SCHED_DEQUEUE_BURST_SIZE 32
 
 #define SW_PORT_HIST_LIST (MAX_SW_PROD_Q_DEPTH) /* size of our history list */
+#define NUM_SAMPLES 64 /* how many data points use for average stats */
 
 #define EVENTDEV_NAME_SW_PMD event_sw
 #define SW_PMD_NAME RTE_STR(event_sw)
 
 #define SW_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
 
+enum {
+	QE_FLAG_VALID_SHIFT = 0,
+	QE_FLAG_COMPLETE_SHIFT,
+	QE_FLAG_NOT_EOP_SHIFT,
+	_QE_FLAG_COUNT
+};
+
+#define QE_FLAG_VALID    (1 << QE_FLAG_VALID_SHIFT)    /* for NEW FWD, FRAG */
+#define QE_FLAG_COMPLETE (1 << QE_FLAG_COMPLETE_SHIFT) /* set for FWD, DROP  */
+#define QE_FLAG_NOT_EOP  (1 << QE_FLAG_NOT_EOP_SHIFT)  /* set for FRAG only  */
+
+static const uint8_t sw_qe_flag_map[] = {
+		QE_FLAG_VALID /* NEW Event */,
+		QE_FLAG_VALID | QE_FLAG_COMPLETE /* FWD Event */,
+		QE_FLAG_COMPLETE /* RELEASE Event */,
+
+		/* Values which can be used for future support for partial
+		 * events, i.e. where one event comes back to the scheduler
+		 * as multiple which need to be tracked together
+		 */
+		QE_FLAG_VALID | QE_FLAG_COMPLETE | QE_FLAG_NOT_EOP,
+};
+
 #ifdef RTE_LIBRTE_PMD_EVDEV_SW_DEBUG
 #define SW_LOG_INFO(fmt, args...) \
 	RTE_LOG(INFO, EVENTDEV, "[%s] %s() line %u: " fmt "\n", \
@@ -210,6 +234,8 @@ struct sw_evdev {
 	/* Contains all ports - load balanced and directed */
 	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
 
+	rte_atomic32_t inflights __rte_cache_aligned;
+
 	/*
 	 * max events in this instance. Cached here for performance.
 	 * (also available in data->conf.nb_events_limit)
@@ -239,4 +265,12 @@ sw_pmd_priv_const(const struct rte_eventdev *eventdev)
 	return eventdev->data->dev_private;
 }
 
+uint16_t sw_event_enqueue(void *port, const struct rte_event *ev);
+uint16_t sw_event_enqueue_burst(void *port, const struct rte_event ev[],
+		uint16_t num);
+
+uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
+uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
+			uint64_t wait);
+
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_worker.c b/drivers/event/sw/sw_evdev_worker.c
new file mode 100644
index 0000000..aed1597
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_worker.c
@@ -0,0 +1,188 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+
+#include "sw_evdev.h"
+#include "event_ring.h"
+
+#define PORT_ENQUEUE_MAX_BURST_SIZE 64
+
+static inline void
+sw_event_release(struct sw_port *p, uint8_t index)
+{
+	/*
+	 * Drops the next outstanding event in our history. Used on dequeue
+	 * to clear any history before dequeuing more events.
+	 */
+	RTE_SET_USED(index);
+
+	/* create drop message */
+	struct rte_event ev = {
+		.op = sw_qe_flag_map[RTE_EVENT_OP_RELEASE],
+	};
+
+	uint16_t free_count;
+	qe_ring_enqueue_burst(p->rx_worker_ring, &ev, 1, &free_count);
+
+	/* each release returns one credit */
+	p->outstanding_releases--;
+	p->inflight_credits++;
+}
+
+uint16_t
+sw_event_enqueue_burst(void *port, const struct rte_event ev[], uint16_t num)
+{
+	int32_t i;
+	uint8_t new_ops[PORT_ENQUEUE_MAX_BURST_SIZE];
+	struct sw_port *p = port;
+	struct sw_evdev *sw = (void *)p->sw;
+	uint32_t sw_inflights = rte_atomic32_read(&sw->inflights);
+
+	if (p->inflight_max < sw_inflights)
+		return 0;
+	if (num > PORT_ENQUEUE_MAX_BURST_SIZE)
+		num = PORT_ENQUEUE_MAX_BURST_SIZE;
+
+	if (p->inflight_credits < num) {
+		/* Check if sending events would bring instance over the
+		 * max events threshold
+		 */
+		uint32_t credit_update_quanta = sw->credit_update_quanta;
+		if (sw_inflights + credit_update_quanta > sw->nb_events_limit)
+			return 0;
+
+		rte_atomic32_add(&sw->inflights, credit_update_quanta);
+		p->inflight_credits += (credit_update_quanta);
+
+		if (p->inflight_credits < num)
+			return 0;
+	}
+
+	for (i = 0; i < num; i++) {
+		int op = ev[i].op;
+		int outstanding = p->outstanding_releases > 0;
+		const uint8_t invalid_qid = (ev[i].queue_id >= sw->qid_count);
+
+		p->inflight_credits -= (op == RTE_EVENT_OP_NEW);
+		p->inflight_credits += (op == RTE_EVENT_OP_RELEASE) *
+					outstanding;
+
+		new_ops[i] = sw_qe_flag_map[op];
+		new_ops[i] &= ~(invalid_qid << QE_FLAG_VALID_SHIFT);
+
+		/* FWD and RELEASE packets will both resolve to taken (assuming
+		 * correct usage of the API), providing very high correct
+		 * prediction rate.
+		 */
+		if ((new_ops[i] & QE_FLAG_COMPLETE) && outstanding)
+			p->outstanding_releases--;
+		/* Branch to avoid touching p->stats except error case */
+		if (invalid_qid)
+			p->stats.rx_dropped++;
+	}
+
+	/* returns number of events actually enqueued */
+	uint32_t enq = qe_ring_enqueue_burst_with_ops(p->rx_worker_ring, ev, i,
+					     new_ops);
+	if (p->outstanding_releases == 0 && p->last_dequeue_burst_sz != 0) {
+		uint64_t burst_ticks = rte_get_timer_cycles() -
+				p->last_dequeue_ticks;
+		uint64_t burst_pkt_ticks =
+			burst_ticks / p->last_dequeue_burst_sz;
+		p->avg_pkt_ticks -= p->avg_pkt_ticks / NUM_SAMPLES;
+		p->avg_pkt_ticks += burst_pkt_ticks / NUM_SAMPLES;
+		p->last_dequeue_ticks = 0;
+	}
+	return enq;
+}
+
+uint16_t
+sw_event_enqueue(void *port, const struct rte_event *ev)
+{
+	return sw_event_enqueue_burst(port, ev, 1);
+}
+
+uint16_t
+sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
+		uint64_t wait)
+{
+	RTE_SET_USED(wait);
+	struct sw_port *p = (void *)port;
+	struct sw_evdev *sw = (void *)p->sw;
+	struct qe_ring *ring = p->cq_worker_ring;
+	uint32_t credit_update_quanta = sw->credit_update_quanta;
+
+	/* check that all previous dequeues have been released */
+	if (!p->is_directed) {
+		uint16_t out_rels = p->outstanding_releases;
+		uint16_t i;
+		for (i = 0; i < out_rels; i++)
+			sw_event_release(p, i);
+	}
+
+	/* Intel modification: may not be in final API */
+	if (ev == 0)
+		return 0;
+
+	/* returns number of events actually dequeued */
+	uint16_t ndeq = qe_ring_dequeue_burst(ring, ev, num);
+	if (ndeq == 0) {
+		p->outstanding_releases = 0;
+		p->zero_polls++;
+		p->total_polls++;
+		goto end;
+	}
+
+	/* only add credits for directed ports - LB ports send RELEASEs */
+	p->inflight_credits += ndeq * p->is_directed;
+	p->outstanding_releases = ndeq;
+	p->last_dequeue_burst_sz = ndeq;
+	p->last_dequeue_ticks = rte_get_timer_cycles();
+	p->poll_buckets[(ndeq - 1) >> SW_DEQ_STAT_BUCKET_SHIFT]++;
+	p->total_polls++;
+
+end:
+	if (p->inflight_credits >= credit_update_quanta * 2 &&
+			p->inflight_credits > credit_update_quanta + ndeq) {
+		rte_atomic32_sub(&sw->inflights, credit_update_quanta);
+		p->inflight_credits -= credit_update_quanta;
+	}
+	return ndeq;
+}
+
+uint16_t
+sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait)
+{
+	return sw_event_dequeue_burst(port, ev, 1, wait);
+}
-- 
2.7.4

[dpdk-dev] [PATCH v4 13/17] event/sw: add scheduling logic

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add in the scheduling function which takes the events from the
producer queues and buffers them before scheduling them to consumer
queues. The scheduling logic includes support for atomic, reordered,
and parallel scheduling of flows.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/Makefile             |   1 +
 drivers/event/sw/sw_evdev.c           |   1 +
 drivers/event/sw/sw_evdev.h           |  11 +
 drivers/event/sw/sw_evdev_scheduler.c | 602 ++++++++++++++++++++++++++++++++++
 4 files changed, 615 insertions(+)
 create mode 100644 drivers/event/sw/sw_evdev_scheduler.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index b6ecd91..a7f5b3d 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -54,6 +54,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_scheduler.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 9b2816d..b1ae2b6 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -555,6 +555,7 @@ sw_probe(const char *name, const char *params)
 	dev->enqueue_burst = sw_event_enqueue_burst;
 	dev->dequeue = sw_event_dequeue;
 	dev->dequeue_burst = sw_event_dequeue_burst;
+	dev->schedule = sw_event_schedule;
 
 	sw = dev->data->dev_private;
 	sw->data = dev->data;
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index ab372fd..7c157c7 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -248,8 +248,18 @@ struct sw_evdev {
 	/* Cache how many packets are in each cq */
 	uint16_t cq_ring_space[SW_PORTS_MAX] __rte_cache_aligned;
 
+	/* Array of pointers to load-balanced QIDs sorted by priority level */
+	struct sw_qid *qids_prioritized[RTE_EVENT_MAX_QUEUES_PER_DEV];
+
+	/* Stats */
+	struct sw_point_stats stats __rte_cache_aligned;
+	uint64_t sched_called;
 	int32_t sched_quanta;
+	uint64_t sched_no_iq_enqueues;
+	uint64_t sched_no_cq_enqueues;
+	uint64_t sched_cq_qid_called;
 
+	uint8_t started;
 	uint32_t credit_update_quanta;
 };
 
@@ -272,5 +282,6 @@ uint16_t sw_event_enqueue_burst(void *port, const struct rte_event ev[],
 uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
 uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
 			uint64_t wait);
+void sw_event_schedule(struct rte_eventdev *dev);
 
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_scheduler.c b/drivers/event/sw/sw_evdev_scheduler.c
new file mode 100644
index 0000000..2aecc95
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_scheduler.c
@@ -0,0 +1,602 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_ring.h>
+#include <rte_hash_crc.h>
+#include "sw_evdev.h"
+#include "iq_ring.h"
+#include "event_ring.h"
+
+#define SW_IQS_MASK (SW_IQS_MAX-1)
+
+/* Retrieve the highest priority IQ or -1 if no pkts available. Doing the
+ * CLZ twice is faster than caching the value due to data dependencies
+ */
+#define PKT_MASK_TO_IQ(pkts) \
+	(__builtin_ctz(pkts | (1 << SW_IQS_MAX)))
+
+/* Clamp the highest priorities to the max value as allowed by
+ * the mask. Assums MASK is (powerOfTwo - 1). Priority 0 (highest) are shifted
+ * into leftmost IQ so that clz() reads it first on dequeue
+ */
+#define PRIO_TO_IQ(prio) (prio > SW_IQS_MASK ? SW_IQS_MASK : prio)
+
+#define MAX_PER_IQ_DEQUEUE 48
+#define FLOWID_MASK (SW_QID_NUM_FIDS-1)
+
+static inline uint32_t
+sw_schedule_atomic_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count)
+{
+	struct rte_event qes[MAX_PER_IQ_DEQUEUE]; /* count <= MAX */
+	struct rte_event blocked_qes[MAX_PER_IQ_DEQUEUE];
+	uint32_t nb_blocked = 0;
+	uint32_t i;
+
+	if (count > MAX_PER_IQ_DEQUEUE)
+		count = MAX_PER_IQ_DEQUEUE;
+
+	/* This is the QID ID. The QID ID is static, hence it can be
+	 * used to identify the stage of processing in history lists etc
+	 */
+	uint32_t qid_id = qid->id;
+
+	iq_ring_dequeue_burst(qid->iq[iq_num], qes, count);
+	for (i = 0; i < count; i++) {
+		const struct rte_event *qe = &qes[i];
+		/* use cheap bit mixing, we only need to lose a few bits */
+		uint32_t flow_id32 = (qes[i].flow_id) ^ (qes[i].flow_id >> 10);
+		const uint16_t flow_id = FLOWID_MASK & flow_id32;
+		struct sw_fid_t *fid = &qid->fids[flow_id];
+		int cq = fid->cq;
+
+		if (cq < 0) {
+			uint32_t cq_idx = qid->cq_next_tx++;
+			if (qid->cq_next_tx == qid->cq_num_mapped_cqs)
+				qid->cq_next_tx = 0;
+			cq = qid->cq_map[cq_idx];
+
+			/* find least used */
+			int cq_free_cnt = sw->cq_ring_space[cq];
+			for (cq_idx = 0; cq_idx < qid->cq_num_mapped_cqs;
+					cq_idx++) {
+				int test_cq = qid->cq_map[cq_idx];
+				int test_cq_free = sw->cq_ring_space[test_cq];
+				if (test_cq_free > cq_free_cnt) {
+					cq = test_cq;
+					cq_free_cnt = test_cq_free;
+				}
+			}
+
+			fid->cq = cq; /* this pins early */
+		}
+
+		if (sw->cq_ring_space[cq] == 0 ||
+				sw->ports[cq].inflights == SW_PORT_HIST_LIST) {
+			blocked_qes[nb_blocked++] = *qe;
+			continue;
+		}
+
+		struct sw_port *p = &sw->ports[cq];
+
+		/* at this point we can queue up the packet on the cq_buf */
+		fid->pcount++;
+		p->cq_buf[p->cq_buf_count++] = *qe;
+		p->inflights++;
+		sw->cq_ring_space[cq]--;
+
+		int head = (p->hist_head++ & (SW_PORT_HIST_LIST-1));
+		p->hist_list[head].fid = flow_id;
+		p->hist_list[head].qid = qid_id;
+
+		p->stats.tx_pkts++;
+		qid->stats.tx_pkts++;
+
+		/* if we just filled in the last slot, flush the buffer */
+		if (sw->cq_ring_space[cq] == 0) {
+			struct qe_ring *worker = p->cq_worker_ring;
+			qe_ring_enqueue_burst(worker, p->cq_buf,
+					p->cq_buf_count,
+					&sw->cq_ring_space[cq]);
+			p->cq_buf_count = 0;
+		}
+	}
+	iq_ring_put_back(qid->iq[iq_num], blocked_qes, nb_blocked);
+
+	return count - nb_blocked;
+}
+
+static inline uint32_t
+sw_schedule_parallel_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count, int keep_order)
+{
+	uint32_t i;
+	uint32_t cq_idx = qid->cq_next_tx;
+
+	/* This is the QID ID. The QID ID is static, hence it can be
+	 * used to identify the stage of processing in history lists etc
+	 */
+	uint32_t qid_id = qid->id;
+
+	if (count > MAX_PER_IQ_DEQUEUE)
+		count = MAX_PER_IQ_DEQUEUE;
+
+	if (keep_order)
+		/* only schedule as many as we have reorder buffer entries */
+		count = RTE_MIN(count,
+				rte_ring_count(qid->reorder_buffer_freelist));
+
+	for (i = 0; i < count; i++) {
+		const struct rte_event *qe = iq_ring_peek(qid->iq[iq_num]);
+		uint32_t cq_check_count = 0;
+		uint32_t cq;
+
+		/*
+		 *  for parallel, just send to next available CQ in round-robin
+		 * fashion. So scan for an available CQ. If all CQs are full
+		 * just return and move on to next QID
+		 */
+		do {
+			if (++cq_check_count > qid->cq_num_mapped_cqs)
+				goto exit;
+			cq = qid->cq_map[cq_idx];
+			if (++cq_idx == qid->cq_num_mapped_cqs)
+				cq_idx = 0;
+		} while (qe_ring_free_count(sw->ports[cq].cq_worker_ring) == 0 ||
+				sw->ports[cq].inflights == SW_PORT_HIST_LIST);
+
+		struct sw_port *p = &sw->ports[cq];
+		if (sw->cq_ring_space[cq] == 0 ||
+				p->inflights == SW_PORT_HIST_LIST)
+			break;
+
+		sw->cq_ring_space[cq]--;
+
+		qid->stats.tx_pkts++;
+
+		const int head = (p->hist_head & (SW_PORT_HIST_LIST-1));
+
+		p->hist_list[head].fid = qe->flow_id;
+		p->hist_list[head].qid = qid_id;
+
+		if (keep_order)
+			rte_ring_sc_dequeue(qid->reorder_buffer_freelist,
+					(void *)&p->hist_list[head].rob_entry);
+
+		sw->ports[cq].cq_buf[sw->ports[cq].cq_buf_count++] = *qe;
+		iq_ring_pop(qid->iq[iq_num]);
+
+		rte_compiler_barrier();
+		p->inflights++;
+		p->stats.tx_pkts++;
+		p->hist_head++;
+	}
+exit:
+	qid->cq_next_tx = cq_idx;
+	return i;
+}
+
+static uint32_t
+sw_schedule_dir_to_cq(struct sw_evdev *sw, struct sw_qid * const qid,
+		uint32_t iq_num, unsigned int count __rte_unused)
+{
+	uint32_t cq_id = qid->cq_map[0];
+	struct sw_port *port = &sw->ports[cq_id];
+
+	/* get max burst enq size for cq_ring */
+	uint32_t count_free = sw->cq_ring_space[cq_id];
+	if (count_free == 0)
+		return 0;
+
+	/* burst dequeue from the QID IQ ring */
+	struct iq_ring *ring = qid->iq[iq_num];
+	uint32_t ret = iq_ring_dequeue_burst(ring,
+			&port->cq_buf[port->cq_buf_count], count_free);
+	port->cq_buf_count += ret;
+
+	/* Update QID, Port and Total TX stats */
+	qid->stats.tx_pkts += ret;
+	port->stats.tx_pkts += ret;
+
+	/* Subtract credits from cached value */
+	sw->cq_ring_space[cq_id] -= ret;
+
+	return ret;
+}
+
+static uint32_t
+sw_schedule_qid_to_cq(struct sw_evdev *sw)
+{
+	uint32_t pkts = 0;
+	uint32_t qid_idx;
+
+	sw->sched_cq_qid_called++;
+
+	for (qid_idx = 0; qid_idx < sw->qid_count; qid_idx++) {
+		struct sw_qid *qid = sw->qids_prioritized[qid_idx];
+
+		int type = qid->type;
+		int iq_num = PKT_MASK_TO_IQ(qid->iq_pkt_mask);
+
+		/* zero mapped CQs indicates directed */
+		if (iq_num >= SW_IQS_MAX)
+			continue;
+
+		uint32_t pkts_done = 0;
+		uint32_t count = iq_ring_count(qid->iq[iq_num]);
+
+		if (count > 0) {
+			if (type == SW_SCHED_TYPE_DIRECT)
+				pkts_done += sw_schedule_dir_to_cq(sw, qid,
+						iq_num, count);
+			else if (type == RTE_SCHED_TYPE_ATOMIC)
+				pkts_done += sw_schedule_atomic_to_cq(sw, qid,
+						iq_num, count);
+			else
+				pkts_done += sw_schedule_parallel_to_cq(sw, qid,
+						iq_num, count,
+						type == RTE_SCHED_TYPE_ORDERED);
+		}
+
+		/* Check if the IQ that was polled is now empty, and unset it
+		 * in the IQ mask if its empty.
+		 */
+		int all_done = (pkts_done == count);
+
+		qid->iq_pkt_mask &= ~(all_done << (iq_num));
+		pkts += pkts_done;
+	}
+
+	return pkts;
+}
+
+/* This function will perform re-ordering of packets, and injecting into
+ * the appropriate QID IQ. As LB and DIR QIDs are in the same array, but *NOT*
+ * contiguous in that array, this function accepts a "range" of QIDs to scan.
+ */
+static uint16_t
+sw_schedule_reorder(struct sw_evdev *sw, int qid_start, int qid_end)
+{
+	/* Perform egress reordering */
+	struct rte_event *qe;
+	uint32_t pkts_iter = 0;
+
+	for (; qid_start < qid_end; qid_start++) {
+		struct sw_qid *qid = &sw->qids[qid_start];
+		int i, num_entries_in_use;
+
+		if (qid->type != RTE_SCHED_TYPE_ORDERED)
+			continue;
+
+		num_entries_in_use = rte_ring_free_count(
+					qid->reorder_buffer_freelist);
+
+		for (i = 0; i < num_entries_in_use; i++) {
+			struct reorder_buffer_entry *entry;
+			int j;
+
+			entry = &qid->reorder_buffer[qid->reorder_buffer_index];
+
+			if (!entry->ready)
+				break;
+
+			for (j = 0; j < entry->num_fragments; j++) {
+				uint16_t dest_qid;
+				uint16_t dest_iq;
+
+				int idx = entry->fragment_index + j;
+				qe = &entry->fragments[idx];
+
+				dest_qid = qe->queue_id;
+				dest_iq  = PRIO_TO_IQ(qe->priority);
+
+				if (dest_qid >= sw->qid_count) {
+					sw->stats.rx_dropped++;
+					continue;
+				}
+
+				struct sw_qid *dest_qid_ptr =
+					&sw->qids[dest_qid];
+				const struct iq_ring *dest_iq_ptr =
+					dest_qid_ptr->iq[dest_iq];
+				if (iq_ring_free_count(dest_iq_ptr) == 0)
+					break;
+
+				pkts_iter++;
+
+				struct sw_qid *q = &sw->qids[dest_qid];
+				struct iq_ring *r = q->iq[dest_iq];
+
+				/* we checked for space above, so enqueue must
+				 * succeed
+				 */
+				iq_ring_enqueue(r, qe);
+				q->iq_pkt_mask |= (1 << (dest_iq));
+				q->iq_pkt_count[dest_iq]++;
+				q->stats.rx_pkts++;
+			}
+
+			entry->ready = (j != entry->num_fragments);
+			entry->num_fragments -= j;
+			entry->fragment_index += j;
+
+			if (!entry->ready) {
+				entry->fragment_index = 0;
+
+				rte_ring_sp_enqueue(
+						qid->reorder_buffer_freelist,
+						entry);
+
+				qid->reorder_buffer_index++;
+				qid->reorder_buffer_index %= qid->window_size;
+			}
+		}
+	}
+	return pkts_iter;
+}
+
+static inline void __attribute__((always_inline))
+sw_refill_pp_buf(struct sw_evdev *sw, struct sw_port *port)
+{
+	RTE_SET_USED(sw);
+	struct qe_ring *worker = port->rx_worker_ring;
+	port->pp_buf_start = 0;
+	port->pp_buf_count = qe_ring_dequeue_burst(worker, port->pp_buf,
+			RTE_DIM(port->pp_buf));
+}
+
+static inline uint32_t __attribute__((always_inline))
+__pull_port_lb(struct sw_evdev *sw, uint32_t port_id, int allow_reorder)
+{
+	static const struct reorder_buffer_entry dummy_rob;
+	uint32_t pkts_iter = 0;
+	struct sw_port *port = &sw->ports[port_id];
+
+	/* If shadow ring has 0 pkts, pull from worker ring */
+	if (port->pp_buf_count == 0)
+		sw_refill_pp_buf(sw, port);
+
+	while (port->pp_buf_count) {
+		const struct rte_event *qe = &port->pp_buf[port->pp_buf_start];
+		struct sw_hist_list_entry *hist_entry = NULL;
+		uint8_t flags = qe->op;
+		const uint16_t eop = !(flags & QE_FLAG_NOT_EOP);
+		int needs_reorder = 0;
+		/* if no-reordering, having PARTIAL == NEW */
+		if (!allow_reorder && !eop)
+			flags = QE_FLAG_VALID;
+
+		/*
+		 * if we don't have space for this packet in an IQ,
+		 * then move on to next queue. Technically, for a
+		 * packet that needs reordering, we don't need to check
+		 * here, but it simplifies things not to special-case
+		 */
+		uint32_t iq_num = PRIO_TO_IQ(qe->priority);
+		struct sw_qid *qid = &sw->qids[qe->queue_id];
+
+		if ((flags & QE_FLAG_VALID) &&
+				iq_ring_free_count(qid->iq[iq_num]) == 0)
+			break;
+
+		/* now process based on flags. Note that for directed
+		 * queues, the enqueue_flush masks off all but the
+		 * valid flag. This makes FWD and PARTIAL enqueues just
+		 * NEW type, and makes DROPS no-op calls.
+		 */
+		if ((flags & QE_FLAG_COMPLETE) && port->inflights > 0) {
+			const uint32_t hist_tail = port->hist_tail &
+					(SW_PORT_HIST_LIST - 1);
+
+			hist_entry = &port->hist_list[hist_tail];
+			const uint32_t hist_qid = hist_entry->qid;
+			const uint32_t hist_fid = hist_entry->fid;
+
+			struct sw_fid_t *fid =
+				&sw->qids[hist_qid].fids[hist_fid];
+			fid->pcount -= eop;
+			if (fid->pcount == 0)
+				fid->cq = -1;
+
+			if (allow_reorder) {
+				/* set reorder ready if an ordered QID */
+				uintptr_t rob_ptr =
+					(uintptr_t)hist_entry->rob_entry;
+				const uintptr_t valid = (rob_ptr != 0);
+				needs_reorder = valid;
+				rob_ptr |=
+					((valid - 1) & (uintptr_t)&dummy_rob);
+				struct reorder_buffer_entry *tmp_rob_ptr =
+					(struct reorder_buffer_entry *)rob_ptr;
+				tmp_rob_ptr->ready = eop * needs_reorder;
+			}
+
+			port->inflights -= eop;
+			port->hist_tail += eop;
+		}
+		if (flags & QE_FLAG_VALID) {
+			port->stats.rx_pkts++;
+
+			if (allow_reorder && needs_reorder) {
+				struct reorder_buffer_entry *rob_entry =
+						hist_entry->rob_entry;
+
+				/* Although fragmentation not currently
+				 * supported by eventdev API, we support it
+				 * here. Open: How do we alert the user that
+				 * they've exceeded max frags?
+				 */
+				int num_frag = rob_entry->num_fragments;
+				if (num_frag == SW_FRAGMENTS_MAX)
+					sw->stats.rx_dropped++;
+				else {
+					int idx = rob_entry->num_fragments++;
+					rob_entry->fragments[idx] = *qe;
+				}
+				goto end_qe;
+			}
+
+			/* Use the iq_num from above to push the QE
+			 * into the qid at the right priority
+			 */
+
+			qid->iq_pkt_mask |= (1 << (iq_num));
+			iq_ring_enqueue(qid->iq[iq_num], qe);
+			qid->iq_pkt_count[iq_num]++;
+			qid->stats.rx_pkts++;
+			pkts_iter++;
+		}
+
+end_qe:
+		port->pp_buf_start++;
+		port->pp_buf_count--;
+	} /* while (avail_qes) */
+
+	return pkts_iter;
+}
+
+static uint32_t
+sw_schedule_pull_port_lb(struct sw_evdev *sw, uint32_t port_id)
+{
+	return __pull_port_lb(sw, port_id, 1);
+}
+
+static uint32_t
+sw_schedule_pull_port_no_reorder(struct sw_evdev *sw, uint32_t port_id)
+{
+	return __pull_port_lb(sw, port_id, 0);
+}
+
+static uint32_t
+sw_schedule_pull_port_dir(struct sw_evdev *sw, uint32_t port_id)
+{
+	uint32_t pkts_iter = 0;
+	struct sw_port *port = &sw->ports[port_id];
+
+	/* If shadow ring has 0 pkts, pull from worker ring */
+	if (port->pp_buf_count == 0)
+		sw_refill_pp_buf(sw, port);
+
+	while (port->pp_buf_count) {
+		const struct rte_event *qe = &port->pp_buf[port->pp_buf_start];
+		uint8_t flags = qe->op;
+
+		if ((flags & QE_FLAG_VALID) == 0)
+			goto end_qe;
+
+		uint32_t iq_num = PRIO_TO_IQ(qe->priority);
+		struct sw_qid *qid = &sw->qids[qe->queue_id];
+		struct iq_ring *iq_ring = qid->iq[iq_num];
+
+		if (iq_ring_free_count(iq_ring) == 0)
+			break; /* move to next port */
+
+		port->stats.rx_pkts++;
+
+		/* Use the iq_num from above to push the QE
+		 * into the qid at the right priority
+		 */
+		qid->iq_pkt_mask |= (1 << (iq_num));
+		iq_ring_enqueue(iq_ring, qe);
+		qid->iq_pkt_count[iq_num]++;
+		qid->stats.rx_pkts++;
+		pkts_iter++;
+
+end_qe:
+		port->pp_buf_start++;
+		port->pp_buf_count--;
+	} /* while port->pp_buf_count */
+
+	return pkts_iter;
+}
+
+void
+sw_event_schedule(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t in_pkts, out_pkts;
+	uint32_t out_pkts_total = 0, in_pkts_total = 0;
+	int32_t sched_quanta = sw->sched_quanta;
+	uint32_t i;
+
+	sw->sched_called++;
+	if (!sw->started)
+		return;
+
+	do {
+		uint32_t in_pkts_this_iteration = 0;
+
+		/* Pull from rx_ring for ports */
+		do {
+			in_pkts = 0;
+			for (i = 0; i < sw->port_count; i++)
+				if (sw->ports[i].is_directed)
+					in_pkts += sw_schedule_pull_port_dir(sw, i);
+				else if (sw->ports[i].num_ordered_qids > 0)
+					in_pkts += sw_schedule_pull_port_lb(sw, i);
+				else
+					in_pkts += sw_schedule_pull_port_no_reorder(sw, i);
+
+			/* QID scan for re-ordered */
+			in_pkts += sw_schedule_reorder(sw, 0,
+					sw->qid_count);
+			in_pkts_this_iteration += in_pkts;
+		} while (in_pkts > 4 &&
+				(int)in_pkts_this_iteration < sched_quanta);
+
+		out_pkts = 0;
+		out_pkts += sw_schedule_qid_to_cq(sw);
+		out_pkts_total += out_pkts;
+		in_pkts_total += in_pkts_this_iteration;
+
+		if (in_pkts == 0 && out_pkts == 0)
+			break;
+	} while ((int)out_pkts_total < sched_quanta);
+
+	/* push all the internal buffered QEs in port->cq_ring to the
+	 * worker cores: aka, do the ring transfers batched.
+	 */
+	for (i = 0; i < sw->port_count; i++) {
+		struct qe_ring *worker = sw->ports[i].cq_worker_ring;
+		qe_ring_enqueue_burst(worker, sw->ports[i].cq_buf,
+				sw->ports[i].cq_buf_count,
+				&sw->cq_ring_space[i]);
+		sw->ports[i].cq_buf_count = 0;
+	}
+
+	sw->stats.tx_pkts += out_pkts_total;
+	sw->stats.rx_pkts += in_pkts_total;
+
+	sw->sched_no_iq_enqueues += (in_pkts_total == 0);
+	sw->sched_no_cq_enqueues += (out_pkts_total == 0);
+
+}
-- 
2.7.4

[dpdk-dev] [PATCH v4 14/17] event/sw: add start stop and close functions

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 74 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index b1ae2b6..d4d6d7f 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -440,6 +440,77 @@ sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 }
 
 static int
+sw_start(struct rte_eventdev *dev)
+{
+	unsigned int i, j;
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	/* check all ports are set up */
+	for (i = 0; i < sw->port_count; i++)
+		if (sw->ports[i].rx_worker_ring == NULL) {
+			printf("%s %d: port %d not configured\n",
+			       __func__, __LINE__, i);
+			return -1;
+		}
+
+	/* check all queues are configured and mapped to ports*/
+	for (i = 0; i < sw->qid_count; i++)
+		if (sw->qids[i].iq[0] == NULL ||
+				sw->qids[i].cq_num_mapped_cqs == 0) {
+			printf("%s %d: queue %d not configured\n",
+			       __func__, __LINE__, i);
+			return -1;
+		}
+
+	/* build up our prioritized array of qids */
+	/* We don't use qsort here, as if all/multiple entries have the same
+	 * priority, the result is non-deterministic. From "man 3 qsort":
+	 * "If two members compare as equal, their order in the sorted
+	 * array is undefined."
+	 */
+	uint32_t qidx = 0;
+	for (j = 0; j <= RTE_EVENT_DEV_PRIORITY_LOWEST; j++) {
+		for (i = 0; i < sw->qid_count; i++) {
+			if (sw->qids[i].priority == j) {
+				sw->qids_prioritized[qidx] = &sw->qids[i];
+				qidx++;
+			}
+		}
+	}
+	sw->started = 1;
+	return 0;
+}
+
+static void
+sw_stop(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	sw->started = 0;
+}
+
+static int
+sw_close(struct rte_eventdev *dev)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t i;
+
+	for (i = 0; i < sw->qid_count; i++)
+		sw_queue_release(dev, i);
+	sw->qid_count = 0;
+
+	for (i = 0; i < sw->port_count; i++)
+		sw_port_release(&sw->ports[i]);
+	sw->port_count = 0;
+
+	memset(&sw->stats, 0, sizeof(sw->stats));
+	sw->sched_called = 0;
+	sw->sched_no_iq_enqueues = 0;
+	sw->sched_no_cq_enqueues = 0;
+	sw->sched_cq_qid_called = 0;
+
+	return 0;
+}
+
+static int
 assign_numa_node(const char *key __rte_unused, const char *value, void *opaque)
 {
 	int *socket_id = opaque;
@@ -475,6 +546,9 @@ sw_probe(const char *name, const char *params)
 	static const struct rte_eventdev_ops evdev_sw_ops = {
 			.dev_configure = sw_dev_configure,
 			.dev_infos_get = sw_info_get,
+			.dev_close = sw_close,
+			.dev_start = sw_start,
+			.dev_stop = sw_stop,
 
 			.queue_def_conf = sw_queue_def_conf,
 			.queue_setup = sw_queue_setup,
-- 
2.7.4

[dpdk-dev] [PATCH v4 15/17] event/sw: add dump function for easier debugging

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Segfault issue resolved when only partially configured and
rte_event_dev_dump() is called before start(),
Reported-by: Vipin Varghese <vipin.varghese@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 drivers/event/sw/sw_evdev.c | 148 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)

diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index d4d6d7f..2e43461 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -439,6 +439,153 @@ sw_info_get(struct rte_eventdev *dev, struct rte_event_dev_info *info)
 	*info = evdev_sw_info;
 }
 
+static void
+sw_dump(struct rte_eventdev *dev, FILE *f)
+{
+	const struct sw_evdev *sw = sw_pmd_priv(dev);
+
+	static const char * const q_type_strings[] = {
+			"Ordered", "Atomic", "Parallel", "Directed"
+	};
+	uint32_t i;
+	fprintf(f, "EventDev %s: ports %d, qids %d\n", "todo-fix-name",
+			sw->port_count, sw->qid_count);
+
+	fprintf(f, "\trx   %"PRIu64"\n\tdrop %"PRIu64"\n\ttx   %"PRIu64"\n",
+		sw->stats.rx_pkts, sw->stats.rx_dropped, sw->stats.tx_pkts);
+	fprintf(f, "\tsched calls: %"PRIu64"\n", sw->sched_called);
+	fprintf(f, "\tsched cq/qid call: %"PRIu64"\n", sw->sched_cq_qid_called);
+	fprintf(f, "\tsched no IQ enq: %"PRIu64"\n", sw->sched_no_iq_enqueues);
+	fprintf(f, "\tsched no CQ enq: %"PRIu64"\n", sw->sched_no_cq_enqueues);
+	uint32_t inflights = rte_atomic32_read(&sw->inflights);
+	uint32_t credits = sw->nb_events_limit - inflights;
+	fprintf(f, "\tinflight %d, credits: %d\n", inflights, credits);
+
+#define COL_RED "\x1b[31m"
+#define COL_RESET "\x1b[0m"
+
+	for (i = 0; i < sw->port_count; i++) {
+		int max, j;
+		const struct sw_port *p = &sw->ports[i];
+		if (!p->initialized) {
+			fprintf(f, "  %sPort %d not initialized.%s\n",
+				COL_RED, i, COL_RESET);
+			continue;
+		}
+		fprintf(f, "  Port %d %s\n", i,
+			p->is_directed ? " (SingleCons)" : "");
+		fprintf(f, "\trx   %"PRIu64"\tdrop %"PRIu64"\ttx   %"PRIu64
+			"\t%sinflight %d%s\n", sw->ports[i].stats.rx_pkts,
+			sw->ports[i].stats.rx_dropped,
+			sw->ports[i].stats.tx_pkts,
+			(p->inflights == p->inflight_max) ?
+				COL_RED : COL_RESET,
+			sw->ports[i].inflights, COL_RESET);
+
+		fprintf(f, "\tMax New: %u"
+			"\tAvg cycles PP: %"PRIu64"\tCredits: %u\n",
+			sw->ports[i].inflight_max,
+			sw->ports[i].avg_pkt_ticks,
+			sw->ports[i].inflight_credits);
+		fprintf(f, "\tReceive burst distribution:\n");
+		float zp_percent = p->zero_polls * 100.0 / p->total_polls;
+		fprintf(f, zp_percent < 10 ? "\t\t0:%.02f%% " : "\t\t0:%.0f%% ",
+				zp_percent);
+		for (max = (int)RTE_DIM(p->poll_buckets); max-- > 0;)
+			if (p->poll_buckets[max] != 0)
+				break;
+		for (j = 0; j <= max; j++) {
+			if (p->poll_buckets[j] != 0) {
+				float poll_pc = p->poll_buckets[j] * 100.0 /
+					p->total_polls;
+				fprintf(f, "%u-%u:%.02f%% ",
+					((j << SW_DEQ_STAT_BUCKET_SHIFT) + 1),
+					((j+1) << SW_DEQ_STAT_BUCKET_SHIFT),
+					poll_pc);
+			}
+		}
+		fprintf(f, "\n");
+
+		if (p->rx_worker_ring) {
+			uint64_t used = qe_ring_count(p->rx_worker_ring);
+			uint64_t space = qe_ring_free_count(p->rx_worker_ring);
+			const char *col = (space == 0) ? COL_RED : COL_RESET;
+			fprintf(f, "\t%srx ring used: %4"PRIu64"\tfree: %4"
+					PRIu64 COL_RESET"\n", col, used, space);
+		} else
+			fprintf(f, "\trx ring not initialized.\n");
+
+		if (p->cq_worker_ring) {
+			uint64_t used = qe_ring_count(p->cq_worker_ring);
+			uint64_t space = qe_ring_free_count(p->cq_worker_ring);
+			const char *col = (space == 0) ? COL_RED : COL_RESET;
+			fprintf(f, "\t%scq ring used: %4"PRIu64"\tfree: %4"
+					PRIu64 COL_RESET"\n", col, used, space);
+		} else
+			fprintf(f, "\tcq ring not initialized.\n");
+	}
+
+	for (i = 0; i < sw->qid_count; i++) {
+		const struct sw_qid *qid = &sw->qids[i];
+		if (!qid->initialized) {
+			fprintf(f, "  %sQueue %d not initialized.%s\n",
+				COL_RED, i, COL_RESET);
+			continue;
+		}
+		int affinities_per_port[SW_PORTS_MAX] = {0};
+		uint32_t inflights = 0;
+
+		fprintf(f, "  Queue %d (%s)\n", i, q_type_strings[qid->type]);
+		fprintf(f, "\trx   %"PRIu64"\tdrop %"PRIu64"\ttx   %"PRIu64"\n",
+			qid->stats.rx_pkts, qid->stats.rx_dropped,
+			qid->stats.tx_pkts);
+		if (qid->type == RTE_SCHED_TYPE_ORDERED) {
+			struct rte_ring *rob_buf_free =
+				qid->reorder_buffer_freelist;
+			if (rob_buf_free)
+				fprintf(f, "\tReorder entries in use: %u\n",
+					rte_ring_free_count(rob_buf_free));
+			else
+				fprintf(f,
+					"\tReorder buffer not initialized\n");
+		}
+
+		uint32_t flow;
+		for (flow = 0; flow < RTE_DIM(qid->fids); flow++)
+			if (qid->fids[flow].cq != -1) {
+				affinities_per_port[qid->fids[flow].cq]++;
+				inflights += qid->fids[flow].pcount;
+			}
+
+		uint32_t cq;
+		fprintf(f, "\tInflights: %u\tFlows pinned per port: ",
+				inflights);
+		for (cq = 0; cq < sw->port_count; cq++)
+			fprintf(f, "%d ", affinities_per_port[cq]);
+		fprintf(f, "\n");
+
+		uint32_t iq;
+		uint32_t iq_printed = 0;
+		for (iq = 0; iq < SW_IQS_MAX; iq++) {
+			if (!qid->iq[iq]) {
+				fprintf(f, "\tiq %d is not initialized.\n", iq);
+				iq_printed = 1;
+				continue;
+			}
+			uint32_t used = iq_ring_count(qid->iq[iq]);
+			uint32_t free = iq_ring_free_count(qid->iq[iq]);
+			const char *col = (free == 0) ? COL_RED : COL_RESET;
+			if (used > 0) {
+				fprintf(f, "\t%siq %d: Used %d\tFree %d"
+					COL_RESET"\n", col, iq, used, free);
+				iq_printed = 1;
+			}
+		}
+		if (iq_printed == 0)
+			fprintf(f, "\t-- iqs empty --\n");
+	}
+}
+
 static int
 sw_start(struct rte_eventdev *dev)
 {
@@ -549,6 +696,7 @@ sw_probe(const char *name, const char *params)
 			.dev_close = sw_close,
 			.dev_start = sw_start,
 			.dev_stop = sw_stop,
+			.dump = sw_dump,
 
 			.queue_def_conf = sw_queue_def_conf,
 			.queue_setup = sw_queue_setup,
-- 
2.7.4

[dpdk-dev] [PATCH v4 16/17] event/sw: add xstats support

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Add support for xstats to report out on the state of the eventdev.
Useful for debugging and for unit tests, as well as observability
at runtime and performance tuning of apps to work well with the
scheduler.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

---

v3 -> v4:
- xstats reset with ID selection implemented
---
 drivers/event/sw/Makefile          |   1 +
 drivers/event/sw/sw_evdev.c        |   8 +
 drivers/event/sw/sw_evdev.h        |  33 +-
 drivers/event/sw/sw_evdev_xstats.c | 674 +++++++++++++++++++++++++++++++++++++
 4 files changed, 715 insertions(+), 1 deletion(-)
 create mode 100644 drivers/event/sw/sw_evdev_xstats.c

diff --git a/drivers/event/sw/Makefile b/drivers/event/sw/Makefile
index a7f5b3d..eb0dc4c 100644
--- a/drivers/event/sw/Makefile
+++ b/drivers/event/sw/Makefile
@@ -55,6 +55,7 @@ EXPORT_MAP := rte_pmd_evdev_sw_version.map
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_worker.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_scheduler.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += sw_evdev_xstats.c
 
 # export include files
 SYMLINK-y-include +=
diff --git a/drivers/event/sw/sw_evdev.c b/drivers/event/sw/sw_evdev.c
index 2e43461..7d25ab2 100644
--- a/drivers/event/sw/sw_evdev.c
+++ b/drivers/event/sw/sw_evdev.c
@@ -623,6 +623,8 @@ sw_start(struct rte_eventdev *dev)
 			}
 		}
 	}
+	if (sw_xstats_init(sw) < 0)
+		return -1;
 	sw->started = 1;
 	return 0;
 }
@@ -631,6 +633,7 @@ static void
 sw_stop(struct rte_eventdev *dev)
 {
 	struct sw_evdev *sw = sw_pmd_priv(dev);
+	sw_xstats_uninit(sw);
 	sw->started = 0;
 }
 
@@ -706,6 +709,11 @@ sw_probe(const char *name, const char *params)
 			.port_release = sw_port_release,
 			.port_link = sw_port_link,
 			.port_unlink = sw_port_unlink,
+
+			.xstats_get = sw_xstats_get,
+			.xstats_get_names = sw_xstats_get_names,
+			.xstats_get_by_name = sw_xstats_get_by_name,
+			.xstats_reset = sw_xstats_reset,
 	};
 
 	static const char *const args[] = {
diff --git a/drivers/event/sw/sw_evdev.h b/drivers/event/sw/sw_evdev.h
index 7c157c7..61c671d 100644
--- a/drivers/event/sw/sw_evdev.h
+++ b/drivers/event/sw/sw_evdev.h
@@ -62,6 +62,8 @@
 
 #define SW_SCHED_TYPE_DIRECT (RTE_SCHED_TYPE_PARALLEL + 1)
 
+#define SW_NUM_POLL_BUCKETS (MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT)
+
 enum {
 	QE_FLAG_VALID_SHIFT = 0,
 	QE_FLAG_COMPLETE_SHIFT,
@@ -203,7 +205,7 @@ struct sw_port {
 	uint64_t avg_pkt_ticks;      /* tracks average over NUM_SAMPLES burst */
 	uint64_t total_polls;        /* how many polls were counted in stats */
 	uint64_t zero_polls;         /* tracks polls returning nothing */
-	uint32_t poll_buckets[MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT];
+	uint32_t poll_buckets[SW_NUM_POLL_BUCKETS];
 		/* bucket values in 4s for shorter reporting */
 
 	/* History list structs, containing info on pkts egressed to worker */
@@ -230,6 +232,11 @@ struct sw_evdev {
 
 	uint32_t port_count;
 	uint32_t qid_count;
+	uint32_t xstats_count;
+	struct sw_xstats_entry *xstats;
+	uint32_t xstats_count_mode_dev;
+	uint32_t xstats_count_mode_port;
+	uint32_t xstats_count_mode_queue;
 
 	/* Contains all ports - load balanced and directed */
 	struct sw_port ports[SW_PORTS_MAX] __rte_cache_aligned;
@@ -261,6 +268,13 @@ struct sw_evdev {
 
 	uint8_t started;
 	uint32_t credit_update_quanta;
+
+	/* store num stats and offset of the stats for each port */
+	uint16_t xstats_count_per_port[SW_PORTS_MAX];
+	uint16_t xstats_offset_for_port[SW_PORTS_MAX];
+	/* store num stats and offset of the stats for each queue */
+	uint16_t xstats_count_per_qid[RTE_EVENT_MAX_QUEUES_PER_DEV];
+	uint16_t xstats_offset_for_qid[RTE_EVENT_MAX_QUEUES_PER_DEV];
 };
 
 static inline struct sw_evdev *
@@ -283,5 +297,22 @@ uint16_t sw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait);
 uint16_t sw_event_dequeue_burst(void *port, struct rte_event *ev, uint16_t num,
 			uint64_t wait);
 void sw_event_schedule(struct rte_eventdev *dev);
+int sw_xstats_init(struct sw_evdev *dev);
+int sw_xstats_uninit(struct sw_evdev *dev);
+int sw_xstats_get_names(const struct rte_eventdev *dev,
+	enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+	struct rte_event_dev_xstats_name *xstats_names,
+	unsigned int *ids, unsigned int size);
+int sw_xstats_get(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		const unsigned int ids[], uint64_t values[], unsigned int n);
+uint64_t sw_xstats_get_by_name(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id);
+int sw_xstats_reset(struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode,
+		int16_t queue_port_id,
+		const uint32_t ids[],
+		uint32_t nb_ids);
+
 
 #endif /* _SW_EVDEV_H_ */
diff --git a/drivers/event/sw/sw_evdev_xstats.c b/drivers/event/sw/sw_evdev_xstats.c
new file mode 100644
index 0000000..fe778ce
--- /dev/null
+++ b/drivers/event/sw/sw_evdev_xstats.c
@@ -0,0 +1,674 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "sw_evdev.h"
+#include "iq_ring.h"
+#include "event_ring.h"
+
+enum xstats_type {
+	/* common stats */
+	rx,
+	tx,
+	dropped,
+	inflight,
+	calls,
+	credits,
+	/* device instance specific */
+	no_iq_enq,
+	no_cq_enq,
+	/* port_specific */
+	rx_used,
+	rx_free,
+	tx_used,
+	tx_free,
+	pkt_cycles,
+	poll_return, /* for zero-count and used also for port bucket loop */
+	/* qid_specific */
+	iq_size,
+	iq_used,
+	/* qid port mapping specific */
+	pinned,
+};
+
+typedef uint64_t (*xstats_fn)(const struct sw_evdev *dev,
+		uint16_t obj_idx, /* port or queue id */
+		enum xstats_type stat, int extra_arg);
+
+struct sw_xstats_entry {
+	struct rte_event_dev_xstats_name name;
+	xstats_fn fn;
+	uint16_t obj_idx;
+	enum xstats_type stat;
+	enum rte_event_dev_xstats_mode mode;
+	int extra_arg;
+	uint8_t reset_allowed; /* when set, this value can be reset */
+	uint64_t reset_value; /* an offset to be taken away to emulate resets */
+};
+
+static uint64_t
+get_dev_stat(const struct sw_evdev *sw, uint16_t obj_idx __rte_unused,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	switch (type) {
+	case rx: return sw->stats.rx_pkts;
+	case tx: return sw->stats.tx_pkts;
+	case dropped: return sw->stats.rx_dropped;
+	case calls: return sw->sched_called;
+	case no_iq_enq: return sw->sched_no_iq_enqueues;
+	case no_cq_enq: return sw->sched_no_cq_enqueues;
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_port_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	const struct sw_port *p = &sw->ports[obj_idx];
+
+	switch (type) {
+	case rx: return p->stats.rx_pkts;
+	case tx: return p->stats.tx_pkts;
+	case dropped: return p->stats.rx_dropped;
+	case inflight: return p->inflights;
+	case pkt_cycles: return p->avg_pkt_ticks;
+	case calls: return p->total_polls;
+	case credits: return p->inflight_credits;
+	case poll_return: return p->zero_polls;
+	case rx_used: return qe_ring_count(p->rx_worker_ring);
+	case rx_free: return qe_ring_free_count(p->rx_worker_ring);
+	case tx_used: return qe_ring_count(p->cq_worker_ring);
+	case tx_free: return qe_ring_free_count(p->cq_worker_ring);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_port_bucket_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_port *p = &sw->ports[obj_idx];
+
+	switch (type) {
+	case poll_return: return p->poll_buckets[extra_arg];
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg __rte_unused)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+
+	switch (type) {
+	case rx: return qid->stats.rx_pkts;
+	case tx: return qid->stats.tx_pkts;
+	case dropped: return qid->stats.rx_dropped;
+	case inflight:
+		do {
+			uint64_t infl = 0;
+			unsigned int i;
+			for (i = 0; i < RTE_DIM(qid->fids); i++)
+				infl += qid->fids[i].pcount;
+			return infl;
+		} while (0);
+		break;
+	case iq_size: return RTE_DIM(qid->iq[0]->ring);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_iq_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+	const int iq_idx = extra_arg;
+
+	switch (type) {
+	case iq_used: return iq_ring_count(qid->iq[iq_idx]);
+	default: return -1;
+	}
+}
+
+static uint64_t
+get_qid_port_stat(const struct sw_evdev *sw, uint16_t obj_idx,
+		enum xstats_type type, int extra_arg)
+{
+	const struct sw_qid *qid = &sw->qids[obj_idx];
+	uint16_t port = extra_arg;
+
+	switch (type) {
+	case pinned:
+		do {
+			uint64_t pin = 0;
+			unsigned int i;
+			for (i = 0; i < RTE_DIM(qid->fids); i++)
+				if (qid->fids[i].cq == port)
+					pin++;
+			return pin;
+		} while (0);
+		break;
+	default: return -1;
+	}
+}
+
+int
+sw_xstats_init(struct sw_evdev *sw)
+{
+	/*
+	 * define the stats names and types. Used to build up the device
+	 * xstats array
+	 * There are multiple set of stats:
+	 *   - device-level,
+	 *   - per-port,
+	 *   - per-port-dequeue-burst-sizes
+	 *   - per-qid,
+	 *   - per-iq
+	 *   - per-port-per-qid
+	 *
+	 * For each of these sets, we have three parallel arrays, one for the
+	 * names, the other for the stat type parameter to be passed in the fn
+	 * call to get that stat. The third array allows resetting or not.
+	 * All these arrays must be kept in sync
+	 */
+	static const char * const dev_stats[] = { "rx", "tx", "drop",
+			"sched_calls", "sched_no_iq_enq", "sched_no_cq_enq",
+	};
+	static const enum xstats_type dev_types[] = { rx, tx, dropped,
+			calls, no_iq_enq, no_cq_enq,
+	};
+	/* all device stats are allowed to be reset */
+
+	static const char * const port_stats[] = {"rx", "tx", "drop",
+			"inflight", "avg_pkt_cycles", "credits",
+			"rx_ring_used", "rx_ring_free",
+			"cq_ring_used", "cq_ring_free",
+			"dequeue_calls", "dequeues_returning_0",
+	};
+	static const enum xstats_type port_types[] = { rx, tx, dropped,
+			inflight, pkt_cycles, credits,
+			rx_used, rx_free, tx_used, tx_free,
+			calls, poll_return,
+	};
+	static const uint8_t const port_reset_allowed[] = {1, 1, 1,
+			0, 1, 0,
+			0, 0, 0, 0,
+			1, 1,
+	};
+
+	static const char * const port_bucket_stats[] = {
+			"dequeues_returning" };
+	static const enum xstats_type port_bucket_types[] = { poll_return };
+	/* all bucket dequeues are allowed to be reset, handled in loop below */
+
+	static const char * const qid_stats[] = {"rx", "tx", "drop",
+			"inflight", "iq_size"
+	};
+	static const enum xstats_type qid_types[] = { rx, tx, dropped,
+			inflight, iq_size
+	};
+	static const uint8_t const qid_reset_allowed[] = {1, 1, 1,
+			0, 0
+	};
+
+	static const char * const qid_iq_stats[] = { "used" };
+	static const enum xstats_type qid_iq_types[] = { iq_used };
+	/* reset allowed */
+
+	static const char * const qid_port_stats[] = { "pinned_flows" };
+	static const enum xstats_type qid_port_types[] = { pinned };
+	/* reset allowed */
+	/* ---- end of stat definitions ---- */
+
+	/* check sizes, since a missed comma can lead to strings being
+	 * joined by the compiler.
+	 */
+	RTE_BUILD_BUG_ON(RTE_DIM(dev_stats) != RTE_DIM(dev_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(port_stats) != RTE_DIM(port_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_stats) != RTE_DIM(qid_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_iq_stats) != RTE_DIM(qid_iq_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_port_stats) != RTE_DIM(qid_port_types));
+	RTE_BUILD_BUG_ON(RTE_DIM(port_bucket_stats) !=
+			RTE_DIM(port_bucket_types));
+
+	RTE_BUILD_BUG_ON(RTE_DIM(port_stats) != RTE_DIM(port_reset_allowed));
+	RTE_BUILD_BUG_ON(RTE_DIM(qid_stats) != RTE_DIM(qid_reset_allowed));
+
+	/* other vars */
+	const uint32_t cons_bkt_shift =
+		(MAX_SW_CONS_Q_DEPTH >> SW_DEQ_STAT_BUCKET_SHIFT);
+	const unsigned int count = RTE_DIM(dev_stats) +
+			sw->port_count * RTE_DIM(port_stats) +
+			sw->port_count * RTE_DIM(port_bucket_stats) *
+				(cons_bkt_shift + 1) +
+			sw->qid_count * RTE_DIM(qid_stats) +
+			sw->qid_count * SW_IQS_MAX * RTE_DIM(qid_iq_stats) +
+			sw->qid_count * sw->port_count *
+				RTE_DIM(qid_port_stats);
+	unsigned int i, port, qid, iq, bkt, stat = 0;
+
+	sw->xstats = rte_zmalloc_socket(NULL, sizeof(sw->xstats[0]) * count, 0,
+			sw->data->socket_id);
+	if (sw->xstats == NULL)
+		return -ENOMEM;
+
+#define sname sw->xstats[stat].name.name
+	for (i = 0; i < RTE_DIM(dev_stats); i++, stat++) {
+		sw->xstats[stat] = (struct sw_xstats_entry){
+			.fn = get_dev_stat,
+			.stat = dev_types[i],
+			.mode = RTE_EVENT_DEV_XSTATS_DEVICE,
+			.reset_allowed = 1,
+		};
+		snprintf(sname, sizeof(sname), "dev_%s", dev_stats[i]);
+	}
+	sw->xstats_count_mode_dev = stat;
+
+	for (port = 0; port < sw->port_count; port++) {
+		sw->xstats_offset_for_port[port] = stat;
+
+		uint32_t count_offset = stat;
+
+		for (i = 0; i < RTE_DIM(port_stats); i++, stat++) {
+			sw->xstats[stat] = (struct sw_xstats_entry){
+				.fn = get_port_stat,
+				.obj_idx = port,
+				.stat = port_types[i],
+				.mode = RTE_EVENT_DEV_XSTATS_PORT,
+				.reset_allowed = port_reset_allowed[i],
+			};
+			snprintf(sname, sizeof(sname), "port_%u_%s",
+					port, port_stats[i]);
+		}
+
+		for (bkt = 0; bkt < (sw->ports[port].cq_worker_ring->size >>
+				SW_DEQ_STAT_BUCKET_SHIFT) + 1; bkt++) {
+			for (i = 0; i < RTE_DIM(port_bucket_stats); i++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_port_bucket_stat,
+					.obj_idx = port,
+					.stat = port_bucket_types[i],
+					.mode = RTE_EVENT_DEV_XSTATS_PORT,
+					.extra_arg = bkt,
+					.reset_allowed = 1,
+				};
+				snprintf(sname, sizeof(sname),
+					"port_%u_%s_%u-%u",
+					port, port_bucket_stats[i],
+					(bkt << SW_DEQ_STAT_BUCKET_SHIFT) + 1,
+					(bkt + 1) << SW_DEQ_STAT_BUCKET_SHIFT);
+				stat++;
+			}
+		}
+
+		sw->xstats_count_per_port[port] = stat - count_offset;
+	}
+
+	sw->xstats_count_mode_port = stat - sw->xstats_count_mode_dev;
+
+	for (qid = 0; qid < sw->qid_count; qid++) {
+		uint32_t count_offset = stat;
+		sw->xstats_offset_for_qid[qid] = stat;
+
+		for (i = 0; i < RTE_DIM(qid_stats); i++, stat++) {
+			sw->xstats[stat] = (struct sw_xstats_entry){
+				.fn = get_qid_stat,
+				.obj_idx = qid,
+				.stat = qid_types[i],
+				.mode = RTE_EVENT_DEV_XSTATS_QUEUE,
+				.reset_allowed = qid_reset_allowed[i],
+			};
+			snprintf(sname, sizeof(sname), "qid_%u_%s",
+					qid, qid_stats[i]);
+		}
+		for (iq = 0; iq < SW_IQS_MAX; iq++)
+			for (i = 0; i < RTE_DIM(qid_iq_stats); i++, stat++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_qid_iq_stat,
+					.obj_idx = qid,
+					.stat = qid_iq_types[i],
+					.mode = RTE_EVENT_DEV_XSTATS_QUEUE,
+					.extra_arg = iq,
+					.reset_allowed = 0,
+				};
+				snprintf(sname, sizeof(sname),
+						"qid_%u_iq_%u_%s",
+						qid, iq,
+						qid_iq_stats[i]);
+			}
+
+		for (port = 0; port < sw->port_count; port++)
+			for (i = 0; i < RTE_DIM(qid_port_stats); i++, stat++) {
+				sw->xstats[stat] = (struct sw_xstats_entry){
+					.fn = get_qid_port_stat,
+					.obj_idx = qid,
+					.stat = qid_port_types[i],
+					.mode = RTE_EVENT_DEV_XSTATS_QUEUE,
+					.extra_arg = port,
+					.reset_allowed = 0,
+				};
+				snprintf(sname, sizeof(sname),
+						"qid_%u_port_%u_%s",
+						qid, port,
+						qid_port_stats[i]);
+			}
+
+		sw->xstats_count_per_qid[qid] = stat - count_offset;
+	}
+
+	sw->xstats_count_mode_queue = stat -
+		(sw->xstats_count_mode_dev + sw->xstats_count_mode_port);
+#undef sname
+
+	sw->xstats_count = stat;
+
+	return stat;
+}
+
+int
+sw_xstats_uninit(struct sw_evdev *sw)
+{
+	rte_free(sw->xstats);
+	sw->xstats_count = 0;
+	return 0;
+}
+
+int
+sw_xstats_get_names(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		struct rte_event_dev_xstats_name *xstats_names,
+		unsigned int *ids, unsigned int size)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+	unsigned int xidx = 0;
+	RTE_SET_USED(mode);
+	RTE_SET_USED(queue_port_id);
+
+	uint32_t xstats_mode_count = 0;
+	uint32_t start_offset = 0;
+
+	switch (mode) {
+	case RTE_EVENT_DEV_XSTATS_DEVICE:
+		xstats_mode_count = sw->xstats_count_mode_dev;
+		break;
+	case RTE_EVENT_DEV_XSTATS_PORT:
+		if (queue_port_id >= (signed)sw->port_count)
+			break;
+		xstats_mode_count = sw->xstats_count_per_port[queue_port_id];
+		start_offset = sw->xstats_offset_for_port[queue_port_id];
+		break;
+	case RTE_EVENT_DEV_XSTATS_QUEUE:
+		if (queue_port_id >= (signed)sw->qid_count)
+			break;
+		xstats_mode_count = sw->xstats_count_per_qid[queue_port_id];
+		start_offset = sw->xstats_offset_for_qid[queue_port_id];
+		break;
+	default:
+		SW_LOG_ERR("Invalid mode recieved in sw_xstats_get_names()\n");
+		return -EINVAL;
+	};
+
+	if (xstats_mode_count > size || !ids || !xstats_names)
+		return xstats_mode_count;
+
+	for (i = 0; i < sw->xstats_count && xidx < size; i++) {
+		if (sw->xstats[i].mode != mode)
+			continue;
+
+		if (mode != RTE_EVENT_DEV_XSTATS_DEVICE &&
+				queue_port_id != sw->xstats[i].obj_idx)
+			continue;
+
+		xstats_names[xidx] = sw->xstats[i].name;
+		if (ids)
+			ids[xidx] = start_offset + xidx;
+		xidx++;
+	}
+	return xidx;
+}
+
+static int
+sw_xstats_update(struct sw_evdev *sw, enum rte_event_dev_xstats_mode mode,
+		uint8_t queue_port_id, const unsigned int ids[],
+		uint64_t values[], unsigned int n, const uint32_t reset,
+		const uint32_t ret_if_n_lt_nstats)
+{
+	unsigned int i;
+	unsigned int xidx = 0;
+	RTE_SET_USED(mode);
+	RTE_SET_USED(queue_port_id);
+
+	uint32_t xstats_mode_count = 0;
+
+	switch (mode) {
+	case RTE_EVENT_DEV_XSTATS_DEVICE:
+		xstats_mode_count = sw->xstats_count_mode_dev;
+		break;
+	case RTE_EVENT_DEV_XSTATS_PORT:
+		if (queue_port_id >= (signed)sw->port_count)
+			goto invalid_value;
+		xstats_mode_count = sw->xstats_count_per_port[queue_port_id];
+		break;
+	case RTE_EVENT_DEV_XSTATS_QUEUE:
+		if (queue_port_id >= (signed)sw->qid_count)
+			goto invalid_value;
+		xstats_mode_count = sw->xstats_count_per_qid[queue_port_id];
+		break;
+	default:
+		SW_LOG_ERR("Invalid mode recieved in sw_xstats_get()\n");
+		goto invalid_value;
+	};
+
+	/* this function can check num stats and return them (xstats_get() style
+	 * behaviour) or ignore n for reset() of a single stat style behaviour.
+	 */
+	if (ret_if_n_lt_nstats && xstats_mode_count > n)
+		return xstats_mode_count;
+
+	for (i = 0; i < n && xidx < xstats_mode_count; i++) {
+		struct sw_xstats_entry *xs = &sw->xstats[ids[i]];
+		if (ids[i] > sw->xstats_count || xs->mode != mode)
+			continue;
+
+		if (mode != RTE_EVENT_DEV_XSTATS_DEVICE &&
+				queue_port_id != xs->obj_idx)
+			continue;
+
+		uint64_t val = xs->fn(sw, xs->obj_idx, xs->stat, xs->extra_arg)
+					- xs->reset_value;
+
+		if (values)
+			values[xidx] = val;
+
+		if (xs->reset_allowed && reset)
+			xs->reset_value = val;
+
+		xidx++;
+	}
+
+	return xidx;
+invalid_value:
+	return -EINVAL;
+}
+
+int
+sw_xstats_get(const struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id,
+		const unsigned int ids[], uint64_t values[], unsigned int n)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	const uint32_t reset = 0;
+	const uint32_t ret_n_lt_stats = 1;
+	return sw_xstats_update(sw, mode, queue_port_id, ids, values, n,
+				reset, ret_n_lt_stats);
+}
+
+uint64_t
+sw_xstats_get_by_name(const struct rte_eventdev *dev,
+		const char *name, unsigned int *id)
+{
+	const struct sw_evdev *sw = sw_pmd_priv_const(dev);
+	unsigned int i;
+
+	for (i = 0; i < sw->xstats_count; i++) {
+		struct sw_xstats_entry *xs = &sw->xstats[i];
+		if (strncmp(xs->name.name, name,
+				RTE_EVENT_DEV_XSTATS_NAME_SIZE) == 0){
+			if (id != NULL)
+				*id = i;
+			return xs->fn(sw, xs->obj_idx, xs->stat, xs->extra_arg)
+					- xs->reset_value;
+		}
+	}
+	if (id != NULL)
+		*id = (uint32_t)-1;
+	return (uint64_t)-1;
+}
+
+static void
+sw_xstats_reset_range(struct sw_evdev *sw, uint32_t start, uint32_t num)
+{
+	uint32_t i;
+	for (i = start; i < start + num; i++) {
+		struct sw_xstats_entry *xs = &sw->xstats[i];
+		if (!xs->reset_allowed)
+			continue;
+
+		uint64_t val = xs->fn(sw, xs->obj_idx, xs->stat, xs->extra_arg)
+					- xs->reset_value;
+		xs->reset_value = val;
+	}
+}
+
+static int
+sw_xstats_reset_queue(struct sw_evdev *sw, uint8_t queue_id,
+		const uint32_t ids[], uint32_t nb_ids)
+{
+	const uint32_t reset = 1;
+	const uint32_t ret_n_lt_stats = 0;
+	if (ids) {
+		uint32_t nb_reset = sw_xstats_update(sw,
+					RTE_EVENT_DEV_XSTATS_QUEUE,
+					queue_id, ids, NULL, nb_ids,
+					reset, ret_n_lt_stats);
+		return nb_reset == nb_ids ? 0 : -EINVAL;
+	}
+
+	if (ids == NULL)
+		sw_xstats_reset_range(sw, sw->xstats_offset_for_qid[queue_id],
+				      sw->xstats_count_per_qid[queue_id]);
+
+	return 0;
+}
+
+static int
+sw_xstats_reset_port(struct sw_evdev *sw, uint8_t port_id,
+		const uint32_t ids[], uint32_t nb_ids)
+{
+	const uint32_t reset = 1;
+	const uint32_t ret_n_lt_stats = 0;
+	int offset = sw->xstats_offset_for_port[port_id];
+	int nb_stat = sw->xstats_count_per_port[port_id];
+
+	if (ids) {
+		uint32_t nb_reset = sw_xstats_update(sw,
+					RTE_EVENT_DEV_XSTATS_PORT, port_id,
+					ids, NULL, nb_ids,
+					reset, ret_n_lt_stats);
+		return nb_reset == nb_ids ? 0 : -EINVAL;
+	} else
+		sw_xstats_reset_range(sw, offset, nb_stat);
+
+	return 0;
+}
+
+static int
+sw_xstats_reset_dev(struct sw_evdev *sw, const uint32_t ids[], uint32_t nb_ids)
+{
+	uint32_t i;
+	if (ids) {
+		for (i = 0; i < nb_ids; i++) {
+			uint32_t id = ids[i];
+			if (id >= sw->xstats_count_mode_dev)
+				return -EINVAL;
+			sw_xstats_reset_range(sw, id, 1);
+		}
+	} else {
+		for (i = 0; i < sw->xstats_count_mode_dev; i++)
+			sw_xstats_reset_range(sw, i, 1);
+	}
+
+	return 0;
+}
+
+int
+sw_xstats_reset(struct rte_eventdev *dev,
+		enum rte_event_dev_xstats_mode mode,
+		int16_t queue_port_id,
+		const uint32_t ids[],
+		uint32_t nb_ids)
+{
+	struct sw_evdev *sw = sw_pmd_priv(dev);
+	uint32_t i, err;
+
+	/* handle -1 for queue_port_id here, looping over all ports/queues */
+	switch (mode) {
+	case RTE_EVENT_DEV_XSTATS_DEVICE:
+		sw_xstats_reset_dev(sw, ids, nb_ids);
+		break;
+	case RTE_EVENT_DEV_XSTATS_PORT:
+		if (queue_port_id == -1) {
+			for (i = 0; i < sw->port_count; i++) {
+				err = sw_xstats_reset_port(sw, i, ids, nb_ids);
+				if (err)
+					return -EINVAL;
+			}
+		} else if (queue_port_id < (int16_t)sw->port_count)
+			sw_xstats_reset_port(sw, queue_port_id, ids, nb_ids);
+		break;
+	case RTE_EVENT_DEV_XSTATS_QUEUE:
+		if (queue_port_id == -1) {
+			for (i = 0; i < sw->qid_count; i++) {
+				err = sw_xstats_reset_queue(sw, i, ids, nb_ids);
+				if (err)
+					return -EINVAL;
+			}
+		} else if (queue_port_id < (int16_t)sw->qid_count)
+			sw_xstats_reset_queue(sw, queue_port_id, ids, nb_ids);
+		break;
+	};
+
+	return 0;
+}
-- 
2.7.4

[dpdk-dev] [PATCH v4 17/17] app/test: add unit tests for SW eventdev driver

[Harry van Haaren]

From: Bruce Richardson <bruce.richardson@intel.com>

Since the sw driver is a standalone lookaside device that has no HW
requirements, we can provide a set of unit tests that test its
functionality across the different queue types and with different input
scenarios.

This also adds the tests to be automatically run by autotest.py

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

---

v3 -> v4:
- add xstats reset test for device/port/queues
- add xstats id abuse test
- add xstats brute force test
- add ordered queue reconfigure test
- add port reconfig credits test
- add port queue lb unlink to dir relink
---
 app/test/Makefile           |    5 +-
 app/test/autotest_data.py   |   26 +
 app/test/test_eventdev_sw.c | 3179 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 3209 insertions(+), 1 deletion(-)
 create mode 100644 app/test/test_eventdev_sw.c

diff --git a/app/test/Makefile b/app/test/Makefile
index a426548..dc92d9c 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -197,7 +197,10 @@ SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_perf.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
 
-SRCS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += test_eventdev.c
+ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
+SRCS-y += test_eventdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += test_eventdev_sw.c
+endif
 
 SRCS-$(CONFIG_RTE_LIBRTE_KVARGS) += test_kvargs.c
 
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 0cd598b..165ed6c 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -346,6 +346,32 @@ def per_sockets(num):
 non_parallel_test_group_list = [
 
     {
+        "Prefix":    "eventdev",
+        "Memory":    "512",
+        "Tests":
+        [
+            {
+                "Name":    "Eventdev common autotest",
+                "Command": "eventdev_common_autotest",
+                "Func":    default_autotest,
+                "Report":  None,
+            },
+        ]
+    },
+    {
+        "Prefix":    "eventdev_sw",
+        "Memory":    "512",
+        "Tests":
+        [
+            {
+                "Name":    "Eventdev sw autotest",
+                "Command": "eventdev_sw_autotest",
+                "Func":    default_autotest,
+                "Report":  None,
+            },
+        ]
+    },
+    {
         "Prefix":    "kni",
         "Memory":    "512",
         "Tests":
diff --git a/app/test/test_eventdev_sw.c b/app/test/test_eventdev_sw.c
new file mode 100644
index 0000000..f449e9e
--- /dev/null
+++ b/app/test/test_eventdev_sw.c
@@ -0,0 +1,3179 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/queue.h>
+
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+
+#include <rte_eventdev.h>
+#include "test.h"
+
+#define MAX_PORTS 16
+#define MAX_QIDS 16
+#define NUM_PACKETS (1<<18)
+
+static int evdev;
+
+struct test {
+	struct rte_mempool *mbuf_pool;
+	uint8_t port[MAX_PORTS];
+	uint8_t qid[MAX_QIDS];
+	int nb_qids;
+};
+
+static struct rte_event release_ev = {.op = RTE_EVENT_OP_RELEASE };
+
+static inline struct rte_mbuf *
+rte_gen_arp(int portid, struct rte_mempool *mp)
+{
+	/*
+	 * len = 14 + 46
+	 * ARP, Request who-has 10.0.0.1 tell 10.0.0.2, length 46
+	 */
+	static const uint8_t arp_request[] = {
+		/*0x0000:*/ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xa8,
+		0x6b, 0xfd, 0x02, 0x29, 0x08, 0x06, 0x00, 0x01,
+		/*0x0010:*/ 0x08, 0x00, 0x06, 0x04, 0x00, 0x01, 0xec, 0xa8,
+		0x6b, 0xfd, 0x02, 0x29, 0x0a, 0x00, 0x00, 0x01,
+		/*0x0020:*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00,
+		0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		/*0x0030:*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00
+	};
+	struct rte_mbuf *m;
+	int pkt_len = sizeof(arp_request) - 1;
+
+	m = rte_pktmbuf_alloc(mp);
+	if (!m)
+		return 0;
+
+	memcpy((void *)((uintptr_t)m->buf_addr + m->data_off),
+		arp_request, pkt_len);
+	rte_pktmbuf_pkt_len(m) = pkt_len;
+	rte_pktmbuf_data_len(m) = pkt_len;
+
+	RTE_SET_USED(portid);
+
+	return m;
+}
+
+static void
+xstats_print(void)
+{
+	const uint32_t XSTATS_MAX = 1024;
+		uint32_t i;
+		uint32_t ids[XSTATS_MAX];
+		uint64_t values[XSTATS_MAX];
+		struct rte_event_dev_xstats_name xstats_names[XSTATS_MAX];
+
+		for (i = 0; i < XSTATS_MAX; i++)
+			ids[i] = i;
+
+		/* Device names / values */
+		int ret = rte_event_dev_xstats_names_get(evdev,
+						RTE_EVENT_DEV_XSTATS_DEVICE, 0,
+						xstats_names, ids, XSTATS_MAX);
+		if (ret < 0) {
+			printf("%d: xstats names get() returned error\n",
+				__LINE__);
+			return;
+		}
+		ret = rte_event_dev_xstats_get(evdev,
+						RTE_EVENT_DEV_XSTATS_DEVICE,
+						0, ids, values, ret);
+		if (ret > (signed)XSTATS_MAX)
+			printf("%s %d: more xstats available than space\n",
+					__func__, __LINE__);
+		for (i = 0; (signed)i < ret; i++) {
+			printf("%d : %s : %ld\n",
+					i, xstats_names[i].name, values[i]);
+		}
+
+		/* Port names / values */
+		ret = rte_event_dev_xstats_names_get(evdev,
+						RTE_EVENT_DEV_XSTATS_PORT, 0,
+						xstats_names, ids, XSTATS_MAX);
+		ret = rte_event_dev_xstats_get(evdev,
+						RTE_EVENT_DEV_XSTATS_PORT, 1,
+						ids, values, ret);
+		if (ret > (signed)XSTATS_MAX)
+			printf("%s %d: more xstats available than space\n",
+					__func__, __LINE__);
+		for (i = 0; (signed)i < ret; i++) {
+			printf("%d : %s : %ld\n",
+					i, xstats_names[i].name, values[i]);
+		}
+
+		/* Queue names / values */
+		ret = rte_event_dev_xstats_names_get(evdev,
+						RTE_EVENT_DEV_XSTATS_QUEUE, 0,
+						xstats_names, ids, XSTATS_MAX);
+		ret = rte_event_dev_xstats_get(evdev,
+						RTE_EVENT_DEV_XSTATS_QUEUE,
+						1, ids, values, ret);
+		if (ret > (signed)XSTATS_MAX)
+			printf("%s %d: more xstats available than space\n",
+					__func__, __LINE__);
+		for (i = 0; (signed)i < ret; i++) {
+			printf("%d : %s : %ld\n",
+					i, xstats_names[i].name, values[i]);
+		}
+}
+
+
+/* initialization and config */
+static inline int
+init(struct test *t, int nb_queues, int nb_ports)
+{
+	struct rte_event_dev_config config = {
+			.nb_event_queues = nb_queues,
+			.nb_event_ports = nb_ports,
+			.nb_event_queue_flows = 1024,
+			.nb_events_limit = 4096,
+			.nb_event_port_dequeue_depth = 128,
+			.nb_event_port_enqueue_depth = 128,
+	};
+	int ret;
+
+	void *temp = t->mbuf_pool; /* save and restore mbuf pool */
+
+	memset(t, 0, sizeof(*t));
+	t->mbuf_pool = temp;
+
+	ret = rte_event_dev_configure(evdev, &config);
+	if (ret < 0)
+		printf("%d: Error configuring device\n", __LINE__);
+	return ret;
+};
+
+static inline int
+create_ports(struct test *t, int num_ports)
+{
+	int i;
+	static const struct rte_event_port_conf conf = {
+			.new_event_threshold = 1024,
+			.dequeue_depth = 32,
+			.enqueue_depth = 64,
+	};
+	if (num_ports > MAX_PORTS)
+		return -1;
+
+	for (i = 0; i < num_ports; i++) {
+		if (rte_event_port_setup(evdev, i, &conf) < 0) {
+			printf("Error setting up port %d\n", i);
+			return -1;
+		}
+		t->port[i] = i;
+	}
+
+	return 0;
+}
+
+static inline int
+create_lb_qids(struct test *t, int num_qids, uint32_t flags)
+{
+	int i;
+
+	/* Q creation */
+	const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = flags,
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+	};
+
+	for (i = t->nb_qids; i < t->nb_qids + num_qids; i++) {
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+	}
+	t->nb_qids += num_qids;
+	if (t->nb_qids > MAX_QIDS)
+		return -1;
+
+	return 0;
+}
+
+static inline int
+create_atomic_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY);
+}
+
+static inline int
+create_ordered_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_ORDERED_ONLY);
+}
+
+
+static inline int
+create_unordered_qids(struct test *t, int num_qids)
+{
+	return create_lb_qids(t, num_qids, RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY);
+}
+
+static inline int
+create_directed_qids(struct test *t, int num_qids, const uint8_t ports[])
+{
+	int i;
+
+	/* Q creation */
+	static const struct rte_event_queue_conf conf = {
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_SINGLE_LINK,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+	};
+
+	for (i = t->nb_qids; i < t->nb_qids + num_qids; i++) {
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+
+		if (rte_event_port_link(evdev, ports[i - t->nb_qids],
+				&t->qid[i], NULL, 1) != 1) {
+			printf("%d: error creating link for qid %d\n",
+					__LINE__, i);
+			return -1;
+		}
+	}
+	t->nb_qids += num_qids;
+	if (t->nb_qids > MAX_QIDS)
+		return -1;
+
+	return 0;
+}
+
+/* destruction */
+static inline int
+cleanup(struct test *t __rte_unused)
+{
+	rte_event_dev_stop(evdev);
+	rte_event_dev_close(evdev);
+	return 0;
+};
+
+struct test_event_dev_stats {
+	uint64_t rx_pkts;       /**< Total packets received */
+	uint64_t rx_dropped;    /**< Total packets dropped (Eg Invalid QID) */
+	uint64_t tx_pkts;       /**< Total packets transmitted */
+
+	/** Packets received on this port */
+	uint64_t port_rx_pkts[MAX_PORTS];
+	/** Packets dropped on this port */
+	uint64_t port_rx_dropped[MAX_PORTS];
+	/** Packets inflight on this port */
+	uint64_t port_inflight[MAX_PORTS];
+	/** Packets transmitted on this port */
+	uint64_t port_tx_pkts[MAX_PORTS];
+	/** Packets received on this qid */
+	uint64_t qid_rx_pkts[MAX_QIDS];
+	/** Packets dropped on this qid */
+	uint64_t qid_rx_dropped[MAX_QIDS];
+	/** Packets transmitted on this qid */
+	uint64_t qid_tx_pkts[MAX_QIDS];
+};
+
+static inline int
+test_event_dev_stats_get(int dev_id, struct test_event_dev_stats *stats)
+{
+	static uint32_t i;
+	static uint32_t total_ids[3]; /* rx, tx and drop */
+	static uint32_t port_rx_pkts_ids[MAX_PORTS];
+	static uint32_t port_rx_dropped_ids[MAX_PORTS];
+	static uint32_t port_inflight_ids[MAX_PORTS];
+	static uint32_t port_tx_pkts_ids[MAX_PORTS];
+	static uint32_t qid_rx_pkts_ids[MAX_QIDS];
+	static uint32_t qid_rx_dropped_ids[MAX_QIDS];
+	static uint32_t qid_tx_pkts_ids[MAX_QIDS];
+
+
+	stats->rx_pkts = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_rx", &total_ids[0]);
+	stats->rx_dropped = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_drop", &total_ids[1]);
+	stats->tx_pkts = rte_event_dev_xstats_by_name_get(dev_id,
+			"dev_tx", &total_ids[2]);
+	for (i = 0; i < MAX_PORTS; i++) {
+		char name[32];
+		snprintf(name, sizeof(name), "port_%u_rx", i);
+		stats->port_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_rx_pkts_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_drop", i);
+		stats->port_rx_dropped[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_rx_dropped_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_inflight", i);
+		stats->port_inflight[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_inflight_ids[i]);
+		snprintf(name, sizeof(name), "port_%u_tx", i);
+		stats->port_tx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &port_tx_pkts_ids[i]);
+	}
+	for (i = 0; i < MAX_QIDS; i++) {
+		char name[32];
+		snprintf(name, sizeof(name), "qid_%u_rx", i);
+		stats->qid_rx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_rx_pkts_ids[i]);
+		snprintf(name, sizeof(name), "qid_%u_drop", i);
+		stats->qid_rx_dropped[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_rx_dropped_ids[i]);
+		snprintf(name, sizeof(name), "qid_%u_tx", i);
+		stats->qid_tx_pkts[i] = rte_event_dev_xstats_by_name_get(
+				dev_id, name, &qid_tx_pkts_ids[i]);
+	}
+
+	return 0;
+}
+
+/* run_prio_packet_test
+ * This performs a basic packet priority check on the test instance passed in.
+ * It is factored out of the main priority tests as the same tests must be
+ * performed to ensure prioritization of each type of QID.
+ *
+ * Requirements:
+ *  - An initialized test structure, including mempool
+ *  - t->port[0] is initialized for both Enq / Deq of packets to the QID
+ *  - t->qid[0] is the QID to be tested
+ *  - if LB QID, the CQ must be mapped to the QID.
+ */
+static int
+run_prio_packet_test(struct test *t)
+{
+	int err;
+	const uint32_t MAGIC_SEQN[] = {4711, 1234};
+	const uint32_t PRIORITY[] = {3, 0};
+	unsigned int i;
+	for (i = 0; i < RTE_DIM(MAGIC_SEQN); i++) {
+		/* generate pkt and enqueue */
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->seqn = MAGIC_SEQN[i];
+
+		ev = (struct rte_event){
+			.priority = PRIORITY[i],
+			.op = RTE_EVENT_OP_NEW,
+			.queue_id = t->qid[0],
+			.mbuf = arp
+		};
+		err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err < 0) {
+			printf("%d: error failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: error failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_rx_pkts[t->port[0]] != 2) {
+		printf("%d: error stats incorrect for directed port\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	struct rte_event ev, ev2;
+	uint32_t deq_pkts;
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[0], &ev, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (ev.mbuf->seqn != MAGIC_SEQN[1]) {
+		printf("%d: first packet out not highest priority\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	rte_pktmbuf_free(ev.mbuf);
+
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[0], &ev2, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (ev2.mbuf->seqn != MAGIC_SEQN[0]) {
+		printf("%d: second packet out not lower priority\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	rte_pktmbuf_free(ev2.mbuf);
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+test_single_directed_packet(struct test *t)
+{
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 3 directed QIDs going to 3 ports */
+	if (init(t, 3, 3) < 0 ||
+			create_ports(t, 3) < 0 ||
+			create_directed_qids(t, 3, t->port) < 0)
+		return -1;
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+	struct rte_event ev = {
+			.op = RTE_EVENT_OP_NEW,
+			.queue_id = wrk_enq,
+			.mbuf = arp,
+	};
+
+	if (!arp) {
+		printf("%d: gen of pkt failed\n", __LINE__);
+		return -1;
+	}
+
+	const uint32_t MAGIC_SEQN = 4711;
+	arp->seqn = MAGIC_SEQN;
+
+	/* generate pkt and enqueue */
+	err = rte_event_enqueue_burst(evdev, rx_enq, &ev, 1);
+	if (err < 0) {
+		printf("%d: error failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	/* Run schedule() as dir packets may need to be re-ordered */
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: error failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_rx_pkts[rx_enq] != 1) {
+		printf("%d: error stats incorrect for directed port\n",
+				__LINE__);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+	deq_pkts = rte_event_dequeue_burst(evdev, wrk_enq, &ev, 1, 0);
+	if (deq_pkts != 1) {
+		printf("%d: error failed to deq\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_rx_pkts[wrk_enq] != 0 &&
+			stats.port_rx_pkts[wrk_enq] != 1) {
+		printf("%d: error directed stats post-dequeue\n", __LINE__);
+		return -1;
+	}
+
+	if (ev.mbuf->seqn != MAGIC_SEQN) {
+		printf("%d: error magic sequence number not dequeued\n",
+				__LINE__);
+		return -1;
+	}
+
+	rte_pktmbuf_free(ev.mbuf);
+	cleanup(t);
+	return 0;
+}
+
+
+static int
+test_priority_directed(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_directed_qids(t, 1, t->port) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_atomic(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_ordered(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_ordered_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+test_priority_unordered(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0 ||
+			create_unordered_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* map the QID */
+	if (rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping qid to port\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	return run_prio_packet_test(t);
+}
+
+static int
+burst_packets(struct test *t)
+{
+	/************** CONFIG ****************/
+	uint32_t i;
+	int err;
+	int ret;
+
+	/* Create instance with 2 ports and 2 queues */
+	if (init(t, 2, 2) < 0 ||
+			create_ports(t, 2) < 0 ||
+			create_atomic_qids(t, 2) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	ret = rte_event_port_link(evdev, t->port[0], &t->qid[0], NULL, 1);
+	if (ret != 1) {
+		printf("%d: error mapping lb qid0\n", __LINE__);
+		return -1;
+	}
+	ret = rte_event_port_link(evdev, t->port[1], &t->qid[1], NULL, 1);
+	if (ret != 1) {
+		printf("%d: error mapping lb qid1\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	const uint32_t rx_port = 0;
+	const uint32_t NUM_PKTS = 2;
+
+	for (i = 0; i < NUM_PKTS; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: error generating pkt\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = i % 2,
+				.flow_id = i % 3,
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_port], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+	rte_event_schedule(evdev);
+
+	/* Check stats for all NUM_PKTS arrived to sched core */
+	struct test_event_dev_stats stats;
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+	if (stats.rx_pkts != NUM_PKTS || stats.tx_pkts != NUM_PKTS) {
+		printf("%d: Sched core didn't receive all %d pkts\n",
+				__LINE__, NUM_PKTS);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+	int p;
+
+	deq_pkts = 0;
+	/******** DEQ QID 1 *******/
+	do {
+		struct rte_event ev;
+		p = rte_event_dequeue_burst(evdev, t->port[0], &ev, 1, 0);
+		deq_pkts += p;
+		rte_pktmbuf_free(ev.mbuf);
+	} while (p);
+
+	if (deq_pkts != NUM_PKTS/2) {
+		printf("%d: Half of NUM_PKTS didn't arrive at port 1\n",
+				__LINE__);
+		return -1;
+	}
+
+	/******** DEQ QID 2 *******/
+	deq_pkts = 0;
+	do {
+		struct rte_event ev;
+		p = rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0);
+		deq_pkts += p;
+		rte_pktmbuf_free(ev.mbuf);
+	} while (p);
+	if (deq_pkts != NUM_PKTS/2) {
+		printf("%d: Half of NUM_PKTS didn't arrive at port 2\n",
+				__LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+abuse_inflights(struct test *t)
+{
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* Enqueue op only */
+	err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &release_ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.rx_pkts != 0 ||
+			stats.tx_pkts != 0 ||
+			stats.port_inflight[wrk_enq] != 0) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+xstats_tests(struct test *t)
+{
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	const uint32_t XSTATS_MAX = 1024;
+
+	uint32_t i;
+	uint32_t ids[XSTATS_MAX];
+	uint64_t values[XSTATS_MAX];
+	struct rte_event_dev_xstats_name xstats_names[XSTATS_MAX];
+
+	for (i = 0; i < XSTATS_MAX; i++)
+		ids[i] = i;
+
+	/* Device names / values */
+	int ret = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, xstats_names, ids, XSTATS_MAX);
+	if (ret != 6) {
+		printf("%d: expected 6 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, ids, values, ret);
+	if (ret != 6) {
+		printf("%d: expected 6 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	/* Port names / values */
+	ret = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT, 0,
+					xstats_names, ids, XSTATS_MAX);
+	if (ret != 21) {
+		printf("%d: expected 21 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT, 0,
+					ids, values, ret);
+	if (ret != 21) {
+		printf("%d: expected 21 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	/* Queue names / values */
+	ret = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE,
+					0, xstats_names, ids, XSTATS_MAX);
+	if (ret != 13) {
+		printf("%d: expected 13 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	/* NEGATIVE TEST: with wrong queue passed, 0 stats should be returned */
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE,
+					1, ids, values, ret);
+	if (ret != -EINVAL) {
+		printf("%d: expected 0 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE,
+					0, ids, values, ret);
+	if (ret != 13) {
+		printf("%d: expected 13 stats, got return %d\n", __LINE__, ret);
+		return -1;
+	}
+
+	/* enqueue packets to check values */
+	for (i = 0; i < 3; i++) {
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		ev.queue_id = t->qid[i];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		ev.flow_id = 7;
+		arp->seqn = i;
+
+		int err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	/* Device names / values */
+	int num_stats = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE, 0,
+					xstats_names, ids, XSTATS_MAX);
+	if (num_stats < 0)
+		goto fail;
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, ids, values, num_stats);
+	static const uint64_t expected[] = {3, 3, 0, 1, 0, 0};
+	for (i = 0; (signed)i < ret; i++) {
+		if (expected[i] != values[i]) {
+			printf(
+				"%d Error xstat %d (id %d) %s : %ld, expect %ld\n",
+				__LINE__, i, ids[i], xstats_names[i].name,
+				values[i], expected[i]);
+			goto fail;
+		}
+	}
+
+	ret = rte_event_dev_xstats_reset(evdev, RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, NULL, 0);
+
+	/* ensure reset statistics are zero-ed */
+	static const uint64_t expected_zero[] = {0, 0, 0, 0, 0, 0};
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, ids, values, num_stats);
+	for (i = 0; (signed)i < ret; i++) {
+		if (expected_zero[i] != values[i]) {
+			printf(
+				"%d Error, xstat %d (id %d) %s : %ld, expect %ld\n",
+				__LINE__, i, ids[i], xstats_names[i].name,
+				values[i], expected_zero[i]);
+			goto fail;
+		}
+	}
+
+	/* port reset checks */
+	num_stats = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT, 0,
+					xstats_names, ids, XSTATS_MAX);
+	if (num_stats < 0)
+		goto fail;
+#if 0
+	for (i = 0; (signed)i < ret; i++) {
+		printf("%d (id = %d): %s : %ld\n",
+			i, ids[i], xstats_names[i].name, values[i]);
+	}
+#endif
+	ret = rte_event_dev_xstats_get(evdev, RTE_EVENT_DEV_XSTATS_PORT,
+					0, ids, values, num_stats);
+
+	static const uint64_t port_expected[] = {
+		3 /* rx */,
+		0 /* tx */,
+		0 /* drop */,
+		0 /* inflights */,
+		0 /* avg pkt cycles */,
+		29 /* credits */,
+		0 /* rx ring used */,
+		4096 /* rx ring free */,
+		0 /* cq ring used */,
+		32 /* cq ring free */,
+		0 /* dequeue calls */,
+		/* 10 dequeue burst buckets */
+		0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0,
+	};
+	if (ret != RTE_DIM(port_expected)) {
+		printf("%s %d: wrong number of port stats (%d), expected %ld\n",
+			__func__, __LINE__, ret, RTE_DIM(port_expected));
+	}
+
+	for (i = 0; (signed)i < ret; i++) {
+		if (port_expected[i] != values[i]) {
+			printf("%s : %d: Error stat %s is %ld, expected %ld\n",
+				__func__, __LINE__, xstats_names[i].name,
+				values[i], port_expected[i]);
+			goto fail;
+		}
+	}
+
+	ret = rte_event_dev_xstats_reset(evdev, RTE_EVENT_DEV_XSTATS_PORT,
+					0, NULL, 0);
+
+	/* ensure reset statistics are zero-ed */
+	static const uint64_t port_expected_zero[] = {
+		0 /* rx */,
+		0 /* tx */,
+		0 /* drop */,
+		0 /* inflights */,
+		0 /* avg pkt cycles */,
+		29 /* credits */,
+		0 /* rx ring used */,
+		4096 /* rx ring free */,
+		0 /* cq ring used */,
+		32 /* cq ring free */,
+		0 /* dequeue calls */,
+		/* 10 dequeue burst buckets */
+		0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0,
+	};
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT,
+					0, ids, values, num_stats);
+	for (i = 0; (signed)i < ret; i++) {
+		if (port_expected_zero[i] != values[i]) {
+			printf(
+				"%d, Error, xstat %d (id %d) %s : %ld, expect %ld\n",
+				__LINE__, i, ids[i], xstats_names[i].name,
+				values[i], port_expected_zero[i]);
+			goto fail;
+		}
+	}
+
+	/* QUEUE STATS TESTS */
+	num_stats = rte_event_dev_xstats_names_get(evdev,
+						RTE_EVENT_DEV_XSTATS_QUEUE, 0,
+						xstats_names, ids, XSTATS_MAX);
+	ret = rte_event_dev_xstats_get(evdev, RTE_EVENT_DEV_XSTATS_QUEUE,
+					0, ids, values, num_stats);
+	if (ret < 0) {
+		printf("xstats get returned %d\n", ret);
+		goto fail;
+	}
+	if ((unsigned)ret > XSTATS_MAX)
+		printf("%s %d: more xstats available than space\n",
+				__func__, __LINE__);
+
+	static const uint64_t queue_expected[] = {
+		3 /* rx */,
+		3 /* tx */,
+		0 /* drop */,
+		3 /* inflights */,
+		512 /* iq size */,
+		0, 0, 0, 0, /* iq 0, 1, 2, 3 used */
+		0, 0, 1, 0, /* qid_0_port_X_pinned_flows */
+	};
+	for (i = 0; (signed)i < ret; i++) {
+		if (queue_expected[i] != values[i]) {
+			printf(
+				"%d, Error, xstat %d (id %d) %s : %ld, expect %ld\n",
+				__LINE__, i, ids[i], xstats_names[i].name,
+				values[i], queue_expected[i]);
+			goto fail;
+		}
+	}
+
+	/* Reset the queue stats here */
+	ret = rte_event_dev_xstats_reset(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE, 0,
+					NULL,
+					0);
+
+	/* Verify that the resetable stats are reset, and others are not */
+	static const uint64_t queue_expected_zero[] = {
+		0 /* rx */,
+		0 /* tx */,
+		0 /* drop */,
+		3 /* inflight */,
+		512 /* iq size */,
+		0, 0, 0, 0, /* 4 iq used */
+		0, 0, 1, 0, /* qid to port pinned flows */
+	};
+
+	ret = rte_event_dev_xstats_get(evdev, RTE_EVENT_DEV_XSTATS_QUEUE, 0,
+					ids, values, num_stats);
+	int fails = 0;
+	for (i = 0; (signed)i < ret; i++) {
+		if (queue_expected_zero[i] != values[i]) {
+			printf(
+				"%d, Error, xstat %d (id %d) %s : %ld, expect %ld\n",
+				__LINE__, i, ids[i], xstats_names[i].name,
+				values[i], queue_expected_zero[i]);
+			fails++;
+		}
+	}
+	if (fails) {
+		printf("%d : %d of values were not as expected above\n",
+				__LINE__, fails);
+		goto fail;
+	}
+
+	cleanup(t);
+	return 0;
+
+fail:
+	rte_event_dev_dump(0, stdout);
+	cleanup(t);
+	return -1;
+}
+
+
+static int
+xstats_id_abuse_tests(struct test *t)
+{
+	int err;
+	const uint32_t XSTATS_MAX = 1024;
+	const uint32_t link_port = 2;
+
+	uint32_t ids[XSTATS_MAX];
+	struct rte_event_dev_xstats_name xstats_names[XSTATS_MAX];
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		goto fail;
+	}
+
+	err = rte_event_port_link(evdev, t->port[link_port], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		goto fail;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		goto fail;
+	}
+
+	/* no test for device, as it ignores the port/q number */
+	int num_stats = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT,
+					UINT8_MAX-1, xstats_names, ids,
+					XSTATS_MAX);
+	if (num_stats != 0) {
+		printf("%d: expected %d stats, got return %d\n", __LINE__,
+				0, num_stats);
+		goto fail;
+	}
+
+	num_stats = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE,
+					UINT8_MAX-1, xstats_names, ids,
+					XSTATS_MAX);
+	if (num_stats != 0) {
+		printf("%d: expected %d stats, got return %d\n", __LINE__,
+				0, num_stats);
+		goto fail;
+	}
+
+	cleanup(t);
+	return 0;
+fail:
+	cleanup(t);
+	return -1;
+}
+
+static int
+port_reconfig_credits(struct test *t)
+{
+	if (init(t, 1, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	uint32_t i;
+	const uint32_t NUM_ITERS = 32;
+	for (i = 0; i < NUM_ITERS; i++) {
+		const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+		};
+		if (rte_event_queue_setup(evdev, 0, &conf) < 0) {
+			printf("%d: error creating qid\n", __LINE__);
+			return -1;
+		}
+		t->qid[0] = 0;
+
+		static const struct rte_event_port_conf port_conf = {
+				.new_event_threshold = 128,
+				.dequeue_depth = 32,
+				.enqueue_depth = 64,
+		};
+		if (rte_event_port_setup(evdev, 0, &port_conf) < 0) {
+			printf("%d Error setting up port\n", __LINE__);
+			return -1;
+		}
+
+		int links = rte_event_port_link(evdev, 0, NULL, NULL, 0);
+		if (links != 1) {
+			printf("%d: error mapping lb qid\n", __LINE__);
+			goto fail;
+		}
+
+		if (rte_event_dev_start(evdev) < 0) {
+			printf("%d: Error with start call\n", __LINE__);
+			goto fail;
+		}
+
+		const uint32_t NPKTS = 1;
+		uint32_t j;
+		for (j = 0; j < NPKTS; j++) {
+			struct rte_event ev;
+			struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+			if (!arp) {
+				printf("%d: gen of pkt failed\n", __LINE__);
+				goto fail;
+			}
+			ev.queue_id = t->qid[0];
+			ev.op = RTE_EVENT_OP_NEW;
+			ev.mbuf = arp;
+			int err = rte_event_enqueue_burst(evdev, 0, &ev, 1);
+			if (err != 1) {
+				printf("%d: Failed to enqueue\n", __LINE__);
+				rte_event_dev_dump(0, stdout);
+				goto fail;
+			}
+		}
+
+		rte_event_schedule(evdev);
+
+		struct rte_event ev[NPKTS];
+		int deq = rte_event_dequeue_burst(evdev, t->port[0], ev,
+							NPKTS, 0);
+		if (deq != 1)
+			printf("%d error; no packet dequeued\n", __LINE__);
+
+		/* let cleanup below stop the device on last iter */
+		if (i != NUM_ITERS-1)
+			rte_event_dev_stop(evdev);
+	}
+
+	cleanup(t);
+	return 0;
+fail:
+	cleanup(t);
+	return -1;
+}
+
+static int
+port_single_lb_reconfig(struct test *t)
+{
+	if (init(t, 2, 2) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		goto fail;
+	}
+
+	static const struct rte_event_queue_conf conf_lb_atomic = {
+		.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+		.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+		.nb_atomic_flows = 1024,
+		.nb_atomic_order_sequences = 1024,
+	};
+	if (rte_event_queue_setup(evdev, 0, &conf_lb_atomic) < 0) {
+		printf("%d: error creating qid\n", __LINE__);
+		goto fail;
+	}
+
+	static const struct rte_event_queue_conf conf_single_link = {
+		.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+		.event_queue_cfg = RTE_EVENT_QUEUE_CFG_SINGLE_LINK,
+		.nb_atomic_flows = 1024,
+		.nb_atomic_order_sequences = 1024,
+	};
+	if (rte_event_queue_setup(evdev, 1, &conf_single_link) < 0) {
+		printf("%d: error creating qid\n", __LINE__);
+		goto fail;
+	}
+
+	struct rte_event_port_conf port_conf = {
+		.new_event_threshold = 128,
+		.dequeue_depth = 32,
+		.enqueue_depth = 64,
+	};
+	if (rte_event_port_setup(evdev, 0, &port_conf) < 0) {
+		printf("%d Error setting up port\n", __LINE__);
+		goto fail;
+	}
+	if (rte_event_port_setup(evdev, 1, &port_conf) < 0) {
+		printf("%d Error setting up port\n", __LINE__);
+		goto fail;
+	}
+
+	/* link port to lb queue */
+	uint8_t queue_id = 0;
+	if (rte_event_port_link(evdev, 0, &queue_id, NULL, 1) != 1) {
+		printf("%d: error creating link for qid\n", __LINE__);
+		goto fail;
+	}
+
+	int ret = rte_event_port_unlink(evdev, 0, &queue_id, 1);
+	if (ret != 1) {
+		printf("%d: Error unlinking lb port\n", __LINE__);
+		goto fail;
+	}
+
+	queue_id = 1;
+	if (rte_event_port_link(evdev, 0, &queue_id, NULL, 1) != 1) {
+		printf("%d: error creating link for qid\n", __LINE__);
+		goto fail;
+	}
+
+	queue_id = 0;
+	int err = rte_event_port_link(evdev, 1, &queue_id, NULL, 1);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		goto fail;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		goto fail;
+	}
+
+	cleanup(t);
+	return 0;
+fail:
+	cleanup(t);
+	return -1;
+}
+
+static int
+xstats_brute_force(struct test *t)
+{
+	uint32_t i;
+	const uint32_t XSTATS_MAX = 1024;
+	uint32_t ids[XSTATS_MAX];
+	uint64_t values[XSTATS_MAX];
+	struct rte_event_dev_xstats_name xstats_names[XSTATS_MAX];
+
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	int err = rte_event_port_link(evdev, t->port[0], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		goto fail;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		goto fail;
+	}
+
+	for (i = 0; i < XSTATS_MAX; i++)
+		ids[i] = i;
+
+	for (i = 0; i < 3; i++) {
+		uint32_t mode = RTE_EVENT_DEV_XSTATS_DEVICE + i;
+		uint32_t j;
+		for (j = 0; j < UINT8_MAX; j++) {
+			rte_event_dev_xstats_names_get(evdev, mode,
+				j, xstats_names, ids, XSTATS_MAX);
+
+			rte_event_dev_xstats_get(evdev, mode, j, ids,
+						 values, XSTATS_MAX);
+		}
+	}
+
+	cleanup(t);
+	return 0;
+fail:
+	cleanup(t);
+	return -1;
+}
+
+static int
+xstats_id_reset_tests(struct test *t)
+{
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		goto fail;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		goto fail;
+	}
+
+#define XSTATS_MAX 1024
+	int ret;
+	uint32_t i;
+	uint32_t ids[XSTATS_MAX];
+	uint64_t values[XSTATS_MAX];
+	struct rte_event_dev_xstats_name xstats_names[XSTATS_MAX];
+
+	for (i = 0; i < XSTATS_MAX; i++)
+		ids[i] = i;
+
+#define NUM_DEV_STATS 6
+	/* Device names / values */
+	int num_stats = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, xstats_names, ids, XSTATS_MAX);
+	if (num_stats != NUM_DEV_STATS) {
+		printf("%d: expected %d stats, got return %d\n", __LINE__,
+				NUM_DEV_STATS, num_stats);
+		goto fail;
+	}
+	ret = rte_event_dev_xstats_get(evdev,
+					RTE_EVENT_DEV_XSTATS_DEVICE,
+					0, ids, values, num_stats);
+	if (ret != NUM_DEV_STATS) {
+		printf("%d: expected %d stats, got return %d\n", __LINE__,
+				NUM_DEV_STATS, ret);
+		goto fail;
+	}
+
+#define NPKTS 7
+	for (i = 0; i < NPKTS; i++) {
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			goto fail;
+		}
+		ev.queue_id = t->qid[i];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		arp->seqn = i;
+
+		int err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			goto fail;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	static const char * const dev_names[] = {
+		"dev_rx", "dev_tx", "dev_drop", "dev_sched_calls",
+		"dev_sched_no_iq_enq", "dev_sched_no_cq_enq",
+	};
+	uint64_t dev_expected[] = {NPKTS, NPKTS, 0, 1, 0, 0};
+	for (i = 0; (int)i < ret; i++) {
+		unsigned int id;
+		uint64_t val = rte_event_dev_xstats_by_name_get(evdev,
+								dev_names[i],
+								&id);
+		if (id != i) {
+			printf("%d: %s id incorrect, expected %d got %d\n",
+					__LINE__, dev_names[i], i, id);
+			goto fail;
+		}
+		if (val != dev_expected[i]) {
+			printf("%d: %s value incorrect, expected %ld got %d\n",
+					__LINE__, dev_names[i], dev_expected[i],
+					id);
+			goto fail;
+		}
+		/* reset to zero */
+		int reset_ret = rte_event_dev_xstats_reset(evdev,
+						RTE_EVENT_DEV_XSTATS_DEVICE, 0,
+						&id,
+						1);
+		if (reset_ret) {
+			printf("%d: failed to reset successfully\n", __LINE__);
+			goto fail;
+		}
+		dev_expected[i] = 0;
+		/* check value again */
+		val = rte_event_dev_xstats_by_name_get(evdev, dev_names[i], 0);
+		if (val != dev_expected[i]) {
+			printf("%d: %s value incorrect, expected %ld got %ld\n",
+					__LINE__, dev_names[i], dev_expected[i],
+					val);
+			goto fail;
+		}
+	};
+
+/* 48 is stat offset from start of the devices whole xstats.
+ * This WILL break every time we add a statistic to a port
+ * or the device, but there is no other way to test
+ */
+#define PORT_OFF 48
+/* num stats for the tested port. CQ size adds more stats to a port */
+#define NUM_PORT_STATS 21
+/* the port to test. */
+#define PORT 2
+	num_stats = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_PORT, PORT,
+					xstats_names, ids, XSTATS_MAX);
+	if (num_stats != NUM_PORT_STATS) {
+		printf("%d: expected %d stats, got return %d\n",
+			__LINE__, NUM_PORT_STATS, num_stats);
+		goto fail;
+	}
+	ret = rte_event_dev_xstats_get(evdev, RTE_EVENT_DEV_XSTATS_PORT, PORT,
+					ids, values, num_stats);
+
+	if (ret != NUM_PORT_STATS) {
+		printf("%d: expected %d stats, got return %d\n",
+				__LINE__, NUM_PORT_STATS, ret);
+		goto fail;
+	}
+	static const char * const port_names[] = {
+		"port_2_rx",
+		"port_2_tx",
+		"port_2_drop",
+		"port_2_inflight",
+		"port_2_avg_pkt_cycles",
+		"port_2_credits",
+		"port_2_rx_ring_used",
+		"port_2_rx_ring_free",
+		"port_2_cq_ring_used",
+		"port_2_cq_ring_free",
+		"port_2_dequeue_calls",
+		"port_2_dequeues_returning_0",
+		"port_2_dequeues_returning_1-4",
+		"port_2_dequeues_returning_5-8",
+		"port_2_dequeues_returning_9-12",
+		"port_2_dequeues_returning_13-16",
+		"port_2_dequeues_returning_17-20",
+		"port_2_dequeues_returning_21-24",
+		"port_2_dequeues_returning_25-28",
+		"port_2_dequeues_returning_29-32",
+		"port_2_dequeues_returning_33-36",
+	};
+	uint64_t port_expected[] = {
+		0, /* rx */
+		NPKTS, /* tx */
+		0, /* drop */
+		NPKTS, /* inflight */
+		0, /* avg pkt cycles */
+		0, /* credits */
+		0, /* rx ring used */
+		4096, /* rx ring free */
+		NPKTS,  /* cq ring used */
+		25, /* cq ring free */
+		0, /* dequeue zero calls */
+		0, 0, 0, 0, 0, /* 10 dequeue buckets */
+		0, 0, 0, 0, 0,
+	};
+	uint64_t port_expected_zero[] = {
+		0, /* rx */
+		0, /* tx */
+		0, /* drop */
+		NPKTS, /* inflight */
+		0, /* avg pkt cycles */
+		0, /* credits */
+		0, /* rx ring used */
+		4096, /* rx ring free */
+		NPKTS,  /* cq ring used */
+		25, /* cq ring free */
+		0, /* dequeue zero calls */
+		0, 0, 0, 0, 0, /* 10 dequeue buckets */
+		0, 0, 0, 0, 0,
+	};
+	if (RTE_DIM(port_expected) != NUM_PORT_STATS ||
+			RTE_DIM(port_names) != NUM_PORT_STATS) {
+		printf("%d: port array of wrong size\n", __LINE__);
+		goto fail;
+	}
+
+	int failed = 0;
+	for (i = 0; (int)i < ret; i++) {
+		unsigned int id;
+		uint64_t val = rte_event_dev_xstats_by_name_get(evdev,
+								port_names[i],
+								&id);
+		if (id != i + PORT_OFF) {
+			printf("%d: %s id incorrect, expected %d got %d\n",
+					__LINE__, port_names[i], i+PORT_OFF,
+					id);
+			failed = 1;
+		}
+		if (val != port_expected[i]) {
+			printf("%d: %s value incorrect, expected %ld got %d\n",
+					__LINE__, port_names[i],
+					port_expected[i], id);
+			failed = 1;
+		}
+		/* reset to zero */
+		int reset_ret = rte_event_dev_xstats_reset(evdev,
+						RTE_EVENT_DEV_XSTATS_PORT, PORT,
+						&id,
+						1);
+		if (reset_ret) {
+			printf("%d: failed to reset successfully\n", __LINE__);
+			failed = 1;
+		}
+		/* check value again */
+		val = rte_event_dev_xstats_by_name_get(evdev, port_names[i], 0);
+		if (val != port_expected_zero[i]) {
+			printf("%d: %s value incorrect, expected %ld got %ld\n",
+					__LINE__, port_names[i],
+					port_expected_zero[i], val);
+			failed = 1;
+		}
+	};
+	if (failed)
+		goto fail;
+
+/* num queue stats */
+#define NUM_Q_STATS 13
+/* queue offset from start of the devices whole xstats.
+ * This will break every time we add a statistic to a device/port/queue
+ */
+#define QUEUE_OFF 90
+	const uint32_t queue = 0;
+	num_stats = rte_event_dev_xstats_names_get(evdev,
+					RTE_EVENT_DEV_XSTATS_QUEUE, queue,
+					xstats_names, ids, XSTATS_MAX);
+	if (num_stats != NUM_Q_STATS) {
+		printf("%d: expected %d stats, got return %d\n",
+			__LINE__, NUM_Q_STATS, num_stats);
+		goto fail;
+	}
+	ret = rte_event_dev_xstats_get(evdev, RTE_EVENT_DEV_XSTATS_QUEUE,
+					queue, ids, values, num_stats);
+	if (ret != NUM_Q_STATS) {
+		printf("%d: expected 21 stats, got return %d\n", __LINE__, ret);
+		goto fail;
+	}
+	static const char * const queue_names[] = {
+		"qid_0_rx",
+		"qid_0_tx",
+		"qid_0_drop",
+		"qid_0_inflight",
+		"qid_0_iq_size",
+		"qid_0_iq_0_used",
+		"qid_0_iq_1_used",
+		"qid_0_iq_2_used",
+		"qid_0_iq_3_used",
+		"qid_0_port_0_pinned_flows",
+		"qid_0_port_1_pinned_flows",
+		"qid_0_port_2_pinned_flows",
+		"qid_0_port_3_pinned_flows",
+	};
+	uint64_t queue_expected[] = {
+		7, /* rx */
+		7, /* tx */
+		0, /* drop */
+		7, /* inflight */
+		512, /* iq size */
+		0, /* iq 0 used */
+		0, /* iq 1 used */
+		0, /* iq 2 used */
+		0, /* iq 3 used */
+		0, /* qid 0 port 0 pinned flows */
+		0, /* qid 0 port 1 pinned flows */
+		1, /* qid 0 port 2 pinned flows */
+		0, /* qid 0 port 4 pinned flows */
+	};
+	uint64_t queue_expected_zero[] = {
+		0, /* rx */
+		0, /* tx */
+		0, /* drop */
+		7, /* inflight */
+		512, /* iq size */
+		0, /* iq 0 used */
+		0, /* iq 1 used */
+		0, /* iq 2 used */
+		0, /* iq 3 used */
+		0, /* qid 0 port 0 pinned flows */
+		0, /* qid 0 port 1 pinned flows */
+		1, /* qid 0 port 2 pinned flows */
+		0, /* qid 0 port 4 pinned flows */
+	};
+	if (RTE_DIM(queue_expected) != NUM_Q_STATS ||
+			RTE_DIM(queue_names) != NUM_Q_STATS) {
+		printf("%d : queue array of wrong size\n", __LINE__);
+		goto fail;
+	}
+
+	failed = 0;
+	for (i = 0; (int)i < ret; i++) {
+		unsigned int id;
+		uint64_t val = rte_event_dev_xstats_by_name_get(evdev,
+								queue_names[i],
+								&id);
+		if (id != i + QUEUE_OFF) {
+			printf("%d: %s id incorrect, expected %d got %d\n",
+					__LINE__, queue_names[i], i+QUEUE_OFF,
+					id);
+			failed = 1;
+		}
+		if (val != queue_expected[i]) {
+			printf("%d: %s value incorrect, expected %ld got %d\n",
+					__LINE__, queue_names[i],
+					queue_expected[i], id);
+			failed = 1;
+		}
+		/* reset to zero */
+		int reset_ret = rte_event_dev_xstats_reset(evdev,
+						RTE_EVENT_DEV_XSTATS_QUEUE,
+						queue, &id, 1);
+		if (reset_ret) {
+			printf("%d: failed to reset successfully\n", __LINE__);
+			failed = 1;
+		}
+		/* check value again */
+		val = rte_event_dev_xstats_by_name_get(evdev, queue_names[i],
+							0);
+		if (val != queue_expected_zero[i]) {
+			printf("%d: %s value incorrect, expected %ld got %ld\n",
+					__LINE__, queue_names[i],
+					queue_expected_zero[i], val);
+			failed = 1;
+		}
+	};
+
+	if (failed)
+		goto fail;
+
+	cleanup(t);
+	return 0;
+fail:
+	cleanup(t);
+	return -1;
+}
+
+static int
+ordered_reconfigure(struct test *t)
+{
+	if (init(t, 1, 1) < 0 ||
+			create_ports(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ORDERED_ONLY,
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+	};
+
+	if (rte_event_queue_setup(evdev, 0, &conf) < 0) {
+		printf("%d: error creating qid\n", __LINE__);
+		goto failed;
+	}
+
+	if (rte_event_queue_setup(evdev, 0, &conf) < 0) {
+		printf("%d: error creating qid, for 2nd time\n", __LINE__);
+		goto failed;
+	}
+
+	rte_event_port_link(evdev, t->port[0], NULL, NULL, 0);
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+failed:
+	cleanup(t);
+	return -1;
+}
+
+static int
+qid_priorities(struct test *t)
+{
+	/* Test works by having a CQ with enough empty space for all packets,
+	 * and enqueueing 3 packets to 3 QIDs. They must return based on the
+	 * priority of the QID, not the ingress order, to pass the test
+	 */
+	unsigned int i;
+	/* Create instance with 1 ports, and 3 qids */
+	if (init(t, 3, 1) < 0 ||
+			create_ports(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	for (i = 0; i < 3; i++) {
+		/* Create QID */
+		const struct rte_event_queue_conf conf = {
+			.event_queue_cfg = RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY,
+			/* increase priority (0 == highest), as we go */
+			.priority = RTE_EVENT_DEV_PRIORITY_NORMAL - i,
+			.nb_atomic_flows = 1024,
+			.nb_atomic_order_sequences = 1024,
+		};
+
+		if (rte_event_queue_setup(evdev, i, &conf) < 0) {
+			printf("%d: error creating qid %d\n", __LINE__, i);
+			return -1;
+		}
+		t->qid[i] = i;
+	}
+	t->nb_qids = i;
+	/* map all QIDs to port */
+	rte_event_port_link(evdev, t->port[0], NULL, NULL, 0);
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* enqueue 3 packets, setting seqn and QID to check priority */
+	for (i = 0; i < 3; i++) {
+		struct rte_event ev;
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		ev.queue_id = t->qid[i];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		arp->seqn = i;
+
+		int err = rte_event_enqueue_burst(evdev, t->port[0], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	/* dequeue packets, verify priority was upheld */
+	struct rte_event ev[32];
+	uint32_t deq_pkts =
+		rte_event_dequeue_burst(evdev, t->port[0], ev, 32, 0);
+	if (deq_pkts != 3) {
+		printf("%d: failed to deq packets\n", __LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	for (i = 0; i < 3; i++) {
+		if (ev[i].mbuf->seqn != 2-i) {
+			printf(
+				"%d: qid priority test: seqn %d incorrectly prioritized\n",
+					__LINE__, i);
+		}
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+load_balancing(struct test *t)
+{
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	for (i = 0; i < 3; i++) {
+		/* map port 1 - 3 inclusive */
+		if (rte_event_port_link(evdev, t->port[i+1], &t->qid[0],
+				NULL, 1) != 1) {
+			printf("%d: error mapping qid to port %d\n",
+					__LINE__, i);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+	/*
+	 * Create a set of flows that test the load-balancing operation of the
+	 * implementation. Fill CQ 0 and 1 with flows 0 and 1, and test
+	 * with a new flow, which should be sent to the 3rd mapped CQ
+	 */
+	static uint32_t flows[] = {0, 1, 1, 0, 0, 2, 2, 0, 2};
+
+	for (i = 0; i < RTE_DIM(flows); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.flow_id = flows[i],
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	struct test_event_dev_stats stats;
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.port_inflight[1] != 4) {
+		printf("%d:%s: port 1 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+	if (stats.port_inflight[2] != 2) {
+		printf("%d:%s: port 2 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+	if (stats.port_inflight[3] != 3) {
+		printf("%d:%s: port 3 inflight not correct\n", __LINE__,
+				__func__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+load_balancing_history(struct test *t)
+{
+	struct test_event_dev_stats stats = {0};
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	/* Create instance with 1 atomic QID going to 3 ports + 1 prod port */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0)
+		return -1;
+
+	/* CQ mapping to QID */
+	if (rte_event_port_link(evdev, t->port[1], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 1 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_port_link(evdev, t->port[2], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 2 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_port_link(evdev, t->port[3], &t->qid[0], NULL, 1) != 1) {
+		printf("%d: error mapping port 3 qid\n", __LINE__);
+		return -1;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Create a set of flows that test the load-balancing operation of the
+	 * implementation. Fill CQ 0, 1 and 2 with flows 0, 1 and 2, drop
+	 * the packet from CQ 0, send in a new set of flows. Ensure that:
+	 *  1. The new flow 3 gets into the empty CQ0
+	 *  2. packets for existing flow gets added into CQ1
+	 *  3. Next flow 0 pkt is now onto CQ2, since CQ0 and CQ1 now contain
+	 *     more outstanding pkts
+	 *
+	 *  This test makes sure that when a flow ends (i.e. all packets
+	 *  have been completed for that flow), that the flow can be moved
+	 *  to a different CQ when new packets come in for that flow.
+	 */
+	static uint32_t flows1[] = {0, 1, 1, 2};
+
+	for (i = 0; i < RTE_DIM(flows1); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		struct rte_event ev = {
+				.flow_id = flows1[i],
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.event_type = RTE_EVENT_TYPE_CPU,
+				.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+				.mbuf = arp
+		};
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->hash.rss = flows1[i];
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	/* Dequeue the flow 0 packet from port 1, so that we can then drop */
+	struct rte_event ev;
+	if (!rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0)) {
+		printf("%d: failed to dequeue\n", __LINE__);
+		return -1;
+	}
+	if (ev.mbuf->hash.rss != flows1[0]) {
+		printf("%d: unexpected flow received\n", __LINE__);
+		return -1;
+	}
+
+	/* drop the flow 0 packet from port 1 */
+	rte_event_enqueue_burst(evdev, t->port[1], &release_ev, 1);
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	/*
+	 * Set up the next set of flows, first a new flow to fill up
+	 * CQ 0, so that the next flow 0 packet should go to CQ2
+	 */
+	static uint32_t flows2[] = { 3, 3, 3, 1, 1, 0 };
+
+	for (i = 0; i < RTE_DIM(flows2); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		struct rte_event ev = {
+				.flow_id = flows2[i],
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.event_type = RTE_EVENT_TYPE_CPU,
+				.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+				.mbuf = arp
+		};
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+		arp->hash.rss = flows2[i];
+
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d:failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Now check the resulting inflights on each port.
+	 */
+	if (stats.port_inflight[1] != 3) {
+		printf("%d:%s: port 1 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+	if (stats.port_inflight[2] != 4) {
+		printf("%d:%s: port 2 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+	if (stats.port_inflight[3] != 2) {
+		printf("%d:%s: port 3 inflight not correct\n", __LINE__,
+				__func__);
+		printf("Inflights, ports 1, 2, 3: %u, %u, %u\n",
+				(unsigned int)stats.port_inflight[1],
+				(unsigned int)stats.port_inflight[2],
+				(unsigned int)stats.port_inflight[3]);
+		return -1;
+	}
+
+	for (i = 1; i <= 3; i++) {
+		struct rte_event ev;
+		while (rte_event_dequeue_burst(evdev, i, &ev, 1, 0))
+			rte_event_enqueue_burst(evdev, i, &release_ev, 1);
+	}
+	rte_event_schedule(evdev);
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+invalid_qid(struct test *t)
+{
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	int err;
+	uint32_t i;
+
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	for (i = 0; i < 4; i++) {
+		err = rte_event_port_link(evdev, t->port[i], &t->qid[0],
+				NULL, 1);
+		if (err != 1) {
+			printf("%d: error mapping port 1 qid\n", __LINE__);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Send in a packet with an invalid qid to the scheduler.
+	 * We should see the packed enqueued OK, but the inflights for
+	 * that packet should not be incremented, and the rx_dropped
+	 * should be incremented.
+	 */
+	static uint32_t flows1[] = {20};
+
+	for (i = 0; i < RTE_DIM(flows1); i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0] + flows1[i],
+				.flow_id = i,
+				.mbuf = arp,
+		};
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err < 0) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+
+	/* call the scheduler */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * Now check the resulting inflights on the port, and the rx_dropped.
+	 */
+	if (stats.port_inflight[0] != 0) {
+		printf("%d:%s: port 1 inflight count not correct\n", __LINE__,
+				__func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	if (stats.port_rx_dropped[0] != 1) {
+		printf("%d:%s: port 1 drops\n", __LINE__, __func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+	/* each packet drop should only be counted in one place - port or dev */
+	if (stats.rx_dropped != 0) {
+		printf("%d:%s: port 1 dropped count not correct\n", __LINE__,
+				__func__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+single_packet(struct test *t)
+{
+	const uint32_t MAGIC_SEQN = 7321;
+	struct rte_event ev;
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	const int wrk_enq = 2;
+	int err;
+
+	/* Create instance with 4 ports */
+	if (init(t, 1, 4) < 0 ||
+			create_ports(t, 4) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[wrk_enq], NULL, NULL, 0);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** Gen pkt and enqueue ****************/
+	struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+	if (!arp) {
+		printf("%d: gen of pkt failed\n", __LINE__);
+		return -1;
+	}
+
+	ev.op = RTE_EVENT_OP_NEW;
+	ev.priority = RTE_EVENT_DEV_PRIORITY_NORMAL;
+	ev.mbuf = arp;
+	ev.queue_id = 0;
+	ev.flow_id = 3;
+	arp->seqn = MAGIC_SEQN;
+
+	err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	if (stats.rx_pkts != 1 ||
+			stats.tx_pkts != 1 ||
+			stats.port_inflight[wrk_enq] != 1) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		rte_event_dev_dump(evdev, stdout);
+		return -1;
+	}
+
+	uint32_t deq_pkts;
+
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[wrk_enq], &ev, 1, 0);
+	if (deq_pkts < 1) {
+		printf("%d: Failed to deq\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		return -1;
+	}
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (ev.mbuf->seqn != MAGIC_SEQN) {
+		printf("%d: magic sequence number not dequeued\n", __LINE__);
+		return -1;
+	}
+
+	rte_pktmbuf_free(ev.mbuf);
+	err = rte_event_enqueue_burst(evdev, t->port[wrk_enq], &release_ev, 1);
+	if (err < 0) {
+		printf("%d: Failed to enqueue\n", __LINE__);
+		return -1;
+	}
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[wrk_enq] != 0) {
+		printf("%d: port inflight not correct\n", __LINE__);
+		return -1;
+	}
+
+	cleanup(t);
+	return 0;
+}
+
+static int
+inflight_counts(struct test *t)
+{
+	struct rte_event ev;
+	struct test_event_dev_stats stats;
+	const int rx_enq = 0;
+	const int p1 = 1;
+	const int p2 = 2;
+	int err;
+	int i;
+
+	/* Create instance with 4 ports */
+	if (init(t, 2, 3) < 0 ||
+			create_ports(t, 3) < 0 ||
+			create_atomic_qids(t, 2) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[p1], &t->qid[0], NULL, 1);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+	err = rte_event_port_link(evdev, t->port[p2], &t->qid[1], NULL, 1);
+	if (err != 1) {
+		printf("%d: error mapping lb qid\n", __LINE__);
+		cleanup(t);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/************** FORWARD ****************/
+#define QID1_NUM 5
+	for (i = 0; i < QID1_NUM; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			goto err;
+		}
+
+		ev.queue_id =  t->qid[0];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			goto err;
+		}
+	}
+#define QID2_NUM 3
+	for (i = 0; i < QID2_NUM; i++) {
+		struct rte_mbuf *arp = rte_gen_arp(0, t->mbuf_pool);
+
+		if (!arp) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			goto err;
+		}
+		ev.queue_id =  t->qid[1];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = arp;
+		err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			goto err;
+		}
+	}
+
+	/* schedule */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (err) {
+		printf("%d: failed to get stats\n", __LINE__);
+		goto err;
+	}
+
+	if (stats.rx_pkts != QID1_NUM + QID2_NUM ||
+			stats.tx_pkts != QID1_NUM + QID2_NUM) {
+		printf("%d: Sched core didn't handle pkt as expected\n",
+				__LINE__);
+		goto err;
+	}
+
+	if (stats.port_inflight[p1] != QID1_NUM) {
+		printf("%d: %s port 1 inflight not correct\n", __LINE__,
+				__func__);
+		goto err;
+	}
+	if (stats.port_inflight[p2] != QID2_NUM) {
+		printf("%d: %s port 2 inflight not correct\n", __LINE__,
+				__func__);
+		goto err;
+	}
+
+	/************** DEQUEUE INFLIGHT COUNT CHECKS  ****************/
+	/* port 1 */
+	struct rte_event events[QID1_NUM + QID2_NUM];
+	uint32_t deq_pkts = rte_event_dequeue_burst(evdev, t->port[p1], events,
+			RTE_DIM(events), 0);
+
+	if (deq_pkts != QID1_NUM) {
+		printf("%d: Port 1: DEQUEUE inflight failed\n", __LINE__);
+		goto err;
+	}
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p1] != QID1_NUM) {
+		printf("%d: port 1 inflight decrement after DEQ != 0\n",
+				__LINE__);
+		goto err;
+	}
+	for (i = 0; i < QID1_NUM; i++) {
+		err = rte_event_enqueue_burst(evdev, t->port[p1], &release_ev,
+				1);
+		if (err != 1) {
+			printf("%d: %s rte enqueue of inf release failed\n",
+				__LINE__, __func__);
+			goto err;
+		}
+	}
+
+	/*
+	 * As the scheduler core decrements inflights, it needs to run to
+	 * process packets to act on the drop messages
+	 */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p1] != 0) {
+		printf("%d: port 1 inflight NON NULL after DROP\n", __LINE__);
+		goto err;
+	}
+
+	/* port2 */
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[p2], events,
+			RTE_DIM(events), 0);
+	if (deq_pkts != QID2_NUM) {
+		printf("%d: Port 2: DEQUEUE inflight failed\n", __LINE__);
+		goto err;
+	}
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p2] != QID2_NUM) {
+		printf("%d: port 1 inflight decrement after DEQ != 0\n",
+				__LINE__);
+		goto err;
+	}
+	for (i = 0; i < QID2_NUM; i++) {
+		err = rte_event_enqueue_burst(evdev, t->port[p2], &release_ev,
+				1);
+		if (err != 1) {
+			printf("%d: %s rte enqueue of inf release failed\n",
+				__LINE__, __func__);
+			goto err;
+		}
+	}
+
+	/*
+	 * As the scheduler core decrements inflights, it needs to run to
+	 * process packets to act on the drop messages
+	 */
+	rte_event_schedule(evdev);
+
+	err = test_event_dev_stats_get(evdev, &stats);
+	if (stats.port_inflight[p2] != 0) {
+		printf("%d: port 2 inflight NON NULL after DROP\n", __LINE__);
+		goto err;
+	}
+	cleanup(t);
+	return 0;
+
+err:
+	rte_event_dev_dump(evdev, stdout);
+	cleanup(t);
+	return -1;
+}
+
+static int
+parallel_basic(struct test *t, int check_order)
+{
+	const uint8_t rx_port = 0;
+	const uint8_t w1_port = 1;
+	const uint8_t w3_port = 3;
+	const uint8_t tx_port = 4;
+	int err;
+	int i;
+	uint32_t deq_pkts, j;
+	struct rte_mbuf *mbufs[3];
+	struct rte_mbuf *mbufs_out[3];
+	const uint32_t MAGIC_SEQN = 1234;
+
+	/* Create instance with 4 ports */
+	if (init(t, 2, tx_port + 1) < 0 ||
+			create_ports(t, tx_port + 1) < 0 ||
+			(check_order ?  create_ordered_qids(t, 1) :
+				create_unordered_qids(t, 1)) < 0 ||
+			create_directed_qids(t, 1, &tx_port)) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/*
+	 * CQ mapping to QID
+	 * We need three ports, all mapped to the same ordered qid0. Then we'll
+	 * take a packet out to each port, re-enqueue in reverse order,
+	 * then make sure the reordering has taken place properly when we
+	 * dequeue from the tx_port.
+	 *
+	 * Simplified test setup diagram:
+	 *
+	 * rx_port        w1_port
+	 *        \     /         \
+	 *         qid0 - w2_port - qid1
+	 *              \         /     \
+	 *                w3_port        tx_port
+	 */
+	/* CQ mapping to QID for LB ports (directed mapped on create) */
+	for (i = w1_port; i <= w3_port; i++) {
+		err = rte_event_port_link(evdev, t->port[i], &t->qid[0], NULL,
+				1);
+		if (err != 1) {
+			printf("%d: error mapping lb qid\n", __LINE__);
+			cleanup(t);
+			return -1;
+		}
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	/* Enqueue 3 packets to the rx port */
+	for (i = 0; i < 3; i++) {
+		struct rte_event ev;
+		mbufs[i] = rte_gen_arp(0, t->mbuf_pool);
+		if (!mbufs[i]) {
+			printf("%d: gen of pkt failed\n", __LINE__);
+			return -1;
+		}
+
+		ev.queue_id = t->qid[0];
+		ev.op = RTE_EVENT_OP_NEW;
+		ev.mbuf = mbufs[i];
+		mbufs[i]->seqn = MAGIC_SEQN + i;
+
+		/* generate pkt and enqueue */
+		err = rte_event_enqueue_burst(evdev, t->port[rx_port], &ev, 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue pkt %u, retval = %u\n",
+					__LINE__, i, err);
+			return -1;
+		}
+	}
+
+	rte_event_schedule(evdev);
+
+	/* use extra slot to make logic in loops easier */
+	struct rte_event deq_ev[w3_port + 1];
+
+	/* Dequeue the 3 packets, one from each worker port */
+	for (i = w1_port; i <= w3_port; i++) {
+		deq_pkts = rte_event_dequeue_burst(evdev, t->port[i],
+				&deq_ev[i], 1, 0);
+		if (deq_pkts != 1) {
+			printf("%d: Failed to deq\n", __LINE__);
+			rte_event_dev_dump(evdev, stdout);
+			return -1;
+		}
+	}
+
+	/* Enqueue each packet in reverse order, flushing after each one */
+	for (i = w3_port; i >= w1_port; i--) {
+
+		deq_ev[i].op = RTE_EVENT_OP_FORWARD;
+		deq_ev[i].queue_id = t->qid[1];
+		err = rte_event_enqueue_burst(evdev, t->port[i], &deq_ev[i], 1);
+		if (err != 1) {
+			printf("%d: Failed to enqueue\n", __LINE__);
+			return -1;
+		}
+	}
+	rte_event_schedule(evdev);
+
+	/* dequeue from the tx ports, we should get 3 packets */
+	deq_pkts = rte_event_dequeue_burst(evdev, t->port[tx_port], deq_ev,
+			3, 0);
+
+	/* Check to see if we've got all 3 packets */
+	if (deq_pkts != 3) {
+		printf("%d: expected 3 pkts at tx port got %d from port %d\n",
+			__LINE__, deq_pkts, tx_port);
+		rte_event_dev_dump(evdev, stdout);
+		return 1;
+	}
+
+	/* Check to see if the sequence numbers are in expected order */
+	if (check_order) {
+		for (j = 0 ; j < deq_pkts ; j++) {
+			if (deq_ev[j].mbuf->seqn != MAGIC_SEQN + j) {
+				printf(
+					"%d: Incorrect sequence number(%d) from port %d\n",
+					__LINE__, mbufs_out[j]->seqn, tx_port);
+				return -1;
+			}
+		}
+	}
+
+	/* Destroy the instance */
+	cleanup(t);
+	return 0;
+}
+
+static int
+ordered_basic(struct test *t)
+{
+	return parallel_basic(t, 1);
+}
+
+static int
+unordered_basic(struct test *t)
+{
+	return parallel_basic(t, 0);
+}
+
+static int
+holb(struct test *t) /* test to check we avoid basic head-of-line blocking */
+{
+	const struct rte_event new_ev = {
+			.op = RTE_EVENT_OP_NEW
+			/* all other fields zero */
+	};
+	struct rte_event ev = new_ev;
+	unsigned int rx_port = 0; /* port we get the first flow on */
+	char rx_port_used_stat[64];
+	char rx_port_free_stat[64];
+	char other_port_used_stat[64];
+
+	if (init(t, 1, 2) < 0 ||
+			create_ports(t, 2) < 0 ||
+			create_atomic_qids(t, 1) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+	int nb_links = rte_event_port_link(evdev, t->port[1], NULL, NULL, 0);
+	if (rte_event_port_link(evdev, t->port[0], NULL, NULL, 0) != 1 ||
+			nb_links != 1) {
+		printf("%d: Error links queue to ports\n", __LINE__);
+		goto err;
+	}
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		goto err;
+	}
+
+	/* send one packet and see where it goes, port 0 or 1 */
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error doing first enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	if (rte_event_dev_xstats_by_name_get(evdev, "port_0_cq_ring_used", NULL)
+			!= 1)
+		rx_port = 1;
+
+	snprintf(rx_port_used_stat, sizeof(rx_port_used_stat),
+			"port_%u_cq_ring_used", rx_port);
+	snprintf(rx_port_free_stat, sizeof(rx_port_free_stat),
+			"port_%u_cq_ring_free", rx_port);
+	snprintf(other_port_used_stat, sizeof(other_port_used_stat),
+			"port_%u_cq_ring_used", rx_port ^ 1);
+	if (rte_event_dev_xstats_by_name_get(evdev, rx_port_used_stat, NULL)
+			!= 1) {
+		printf("%d: Error, first event not scheduled\n", __LINE__);
+		goto err;
+	}
+
+	/* now fill up the rx port's queue with one flow to cause HOLB */
+	do {
+		ev = new_ev;
+		if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+			printf("%d: Error with enqueue\n", __LINE__);
+			goto err;
+		}
+		rte_event_schedule(evdev);
+	} while (rte_event_dev_xstats_by_name_get(evdev,
+				rx_port_free_stat, NULL) != 0);
+
+	/* one more packet, which needs to stay in IQ - i.e. HOLB */
+	ev = new_ev;
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error with enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	/* check that the other port still has an empty CQ */
+	if (rte_event_dev_xstats_by_name_get(evdev, other_port_used_stat, NULL)
+			!= 0) {
+		printf("%d: Error, second port CQ is not empty\n", __LINE__);
+		goto err;
+	}
+	/* check IQ now has one packet */
+	if (rte_event_dev_xstats_by_name_get(evdev, "qid_0_iq_0_used", NULL)
+			!= 1) {
+		printf("%d: Error, QID does not have exactly 1 packet\n",
+			__LINE__);
+		goto err;
+	}
+
+	/* send another flow, which should pass the other IQ entry */
+	ev = new_ev;
+	ev.flow_id = 1;
+	if (rte_event_enqueue_burst(evdev, t->port[0], &ev, 1) != 1) {
+		printf("%d: Error with enqueue\n", __LINE__);
+		goto err;
+	}
+	rte_event_schedule(evdev);
+
+	if (rte_event_dev_xstats_by_name_get(evdev, other_port_used_stat, NULL)
+			!= 1) {
+		printf("%d: Error, second flow did not pass out first\n",
+			__LINE__);
+		goto err;
+	}
+
+	if (rte_event_dev_xstats_by_name_get(evdev, "qid_0_iq_0_used", NULL)
+			!= 1) {
+		printf("%d: Error, QID does not have exactly 1 packet\n",
+			__LINE__);
+		goto err;
+	}
+	cleanup(t);
+	return 0;
+err:
+	rte_event_dev_dump(evdev, stdout);
+	cleanup(t);
+	return -1;
+}
+
+static int
+worker_loopback_worker_fn(void *arg)
+{
+	struct test *t = arg;
+	uint8_t port = t->port[1];
+	int count = 0;
+	int enqd;
+
+	/*
+	 * Takes packets from the input port and then loops them back through
+	 * the Eventdev. Each packet gets looped through QIDs 0-8, 16 times
+	 * so each packet goes through 8*16 = 128 times.
+	 */
+	printf("%d: \tWorker function started\n", __LINE__);
+	while (count < NUM_PACKETS) {
+#define BURST_SIZE 32
+		struct rte_event ev[BURST_SIZE];
+		uint16_t i, nb_rx = rte_event_dequeue_burst(evdev, port, ev,
+				BURST_SIZE, 0);
+		if (nb_rx == 0) {
+			rte_pause();
+			continue;
+		}
+
+		for (i = 0; i < nb_rx; i++) {
+			ev[i].queue_id++;
+			if (ev[i].queue_id != 8) {
+				ev[i].op = RTE_EVENT_OP_FORWARD;
+				enqd = rte_event_enqueue_burst(evdev, port,
+						&ev[i], 1);
+				if (enqd != 1) {
+					printf("%d: Can't enqueue FWD!!\n",
+							__LINE__);
+					return -1;
+				}
+				continue;
+			}
+
+			ev[i].queue_id = 0;
+			ev[i].mbuf->udata64++;
+			if (ev[i].mbuf->udata64 != 16) {
+				ev[i].op = RTE_EVENT_OP_FORWARD;
+				enqd = rte_event_enqueue_burst(evdev, port,
+						&ev[i], 1);
+				if (enqd != 1) {
+					printf("%d: Can't enqueue FWD!!\n",
+							__LINE__);
+					return -1;
+				}
+				continue;
+			}
+			/* we have hit 16 iterations through system - drop */
+			rte_pktmbuf_free(ev[i].mbuf);
+			count++;
+			ev[i].op = RTE_EVENT_OP_RELEASE;
+			enqd = rte_event_enqueue_burst(evdev, port, &ev[i], 1);
+			if (enqd != 1) {
+				printf("%d drop enqueue failed\n", __LINE__);
+				return -1;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int
+worker_loopback_producer_fn(void *arg)
+{
+	struct test *t = arg;
+	uint8_t port = t->port[0];
+	uint64_t count = 0;
+
+	printf("%d: \tProducer function started\n", __LINE__);
+	while (count < NUM_PACKETS) {
+		struct rte_mbuf *m = 0;
+		do {
+			m = rte_pktmbuf_alloc(t->mbuf_pool);
+		} while (m == NULL);
+
+		m->udata64 = 0;
+
+		struct rte_event ev = {
+				.op = RTE_EVENT_OP_NEW,
+				.queue_id = t->qid[0],
+				.flow_id = (uintptr_t)m & 0xFFFF,
+				.mbuf = m,
+		};
+
+		if (rte_event_enqueue_burst(evdev, port, &ev, 1) != 1) {
+			while (rte_event_enqueue_burst(evdev, port, &ev, 1) !=
+					1)
+				rte_pause();
+		}
+
+		count++;
+	}
+
+	return 0;
+}
+
+static int
+worker_loopback(struct test *t)
+{
+	/* use a single producer core, and a worker core to see what happens
+	 * if the worker loops packets back multiple times
+	 */
+	struct test_event_dev_stats stats;
+	uint64_t print_cycles = 0, cycles = 0;
+	uint64_t tx_pkts = 0;
+	int err;
+	int w_lcore, p_lcore;
+
+	if (init(t, 8, 2) < 0 ||
+			create_atomic_qids(t, 8) < 0) {
+		printf("%d: Error initializing device\n", __LINE__);
+		return -1;
+	}
+
+	/* RX with low max events */
+	static struct rte_event_port_conf conf = {
+			.dequeue_depth = 32,
+			.enqueue_depth = 64,
+	};
+	/* beware: this cannot be initialized in the static above as it would
+	 * only be initialized once - and this needs to be set for multiple runs
+	 */
+	conf.new_event_threshold = 512;
+
+	if (rte_event_port_setup(evdev, 0, &conf) < 0) {
+		printf("Error setting up RX port\n");
+		return -1;
+	}
+	t->port[0] = 0;
+	/* TX with higher max events */
+	conf.new_event_threshold = 4096;
+	if (rte_event_port_setup(evdev, 1, &conf) < 0) {
+		printf("Error setting up TX port\n");
+		return -1;
+	}
+	t->port[1] = 1;
+
+	/* CQ mapping to QID */
+	err = rte_event_port_link(evdev, t->port[1], NULL, NULL, 0);
+	if (err != 8) { /* should have mapped all queues*/
+		printf("%d: error mapping port 2 to all qids\n", __LINE__);
+		return -1;
+	}
+
+	if (rte_event_dev_start(evdev) < 0) {
+		printf("%d: Error with start call\n", __LINE__);
+		return -1;
+	}
+
+	p_lcore = rte_get_next_lcore(
+			/* start core */ -1,
+			/* skip master */ 1,
+			/* wrap */ 0);
+	w_lcore = rte_get_next_lcore(p_lcore, 1, 0);
+
+	rte_eal_remote_launch(worker_loopback_producer_fn, t, p_lcore);
+	rte_eal_remote_launch(worker_loopback_worker_fn, t, w_lcore);
+
+	print_cycles = cycles = rte_get_timer_cycles();
+	while (rte_eal_get_lcore_state(p_lcore) != FINISHED ||
+			rte_eal_get_lcore_state(w_lcore) != FINISHED) {
+
+		rte_event_schedule(evdev);
+
+		uint64_t new_cycles = rte_get_timer_cycles();
+
+		if (new_cycles - print_cycles > rte_get_timer_hz()) {
+			test_event_dev_stats_get(evdev, &stats);
+			printf(
+				"%d: \tSched Rx = %"PRIu64", Tx = %"PRIu64"\n",
+				__LINE__, stats.rx_pkts, stats.tx_pkts);
+
+			print_cycles = new_cycles;
+		}
+		if (new_cycles - cycles > rte_get_timer_hz() * 3) {
+			test_event_dev_stats_get(evdev, &stats);
+			if (stats.tx_pkts == tx_pkts) {
+				rte_event_dev_dump(evdev, stdout);
+				printf("Dumping xstats:\n");
+				xstats_print();
+				printf(
+					"%d: No schedules for seconds, deadlock\n",
+					__LINE__);
+				return -1;
+			}
+			tx_pkts = stats.tx_pkts;
+			cycles = new_cycles;
+		}
+	}
+	rte_event_schedule(evdev); /* ensure all completions are flushed */
+
+	rte_eal_mp_wait_lcore();
+
+	cleanup(t);
+	return 0;
+}
+
+static struct rte_mempool *eventdev_func_mempool;
+
+static int
+test_sw_eventdev(void)
+{
+	struct test *t = malloc(sizeof(struct test));
+	int ret;
+
+	const char *eventdev_name = "event_sw0";
+	evdev = rte_event_dev_get_dev_id(eventdev_name);
+	if (evdev < 0) {
+		printf("%d: Eventdev %s not found - creating.\n",
+				__LINE__, eventdev_name);
+		if (rte_eal_vdev_init(eventdev_name, NULL) < 0) {
+			printf("Error creating eventdev\n");
+			return -1;
+		}
+		evdev = rte_event_dev_get_dev_id(eventdev_name);
+		if (evdev < 0) {
+			printf("Error finding newly created eventdev\n");
+			return -1;
+		}
+	}
+
+	/* Only create mbuf pool once, reuse for each test run */
+	if (!eventdev_func_mempool) {
+		eventdev_func_mempool = rte_pktmbuf_pool_create(
+				"EVENTDEV_SW_SA_MBUF_POOL",
+				(1<<12), /* 4k buffers */
+				32 /*MBUF_CACHE_SIZE*/,
+				0,
+				512, /* use very small mbufs */
+				rte_socket_id());
+		if (!eventdev_func_mempool) {
+			printf("ERROR creating mempool\n");
+			return -1;
+		}
+	}
+	t->mbuf_pool = eventdev_func_mempool;
+
+	printf("*** Running Single Directed Packet test...\n");
+	ret = test_single_directed_packet(t);
+	if (ret != 0) {
+		printf("ERROR - Single Directed Packet test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Single Load Balanced Packet test...\n");
+	ret = single_packet(t);
+	if (ret != 0) {
+		printf("ERROR - Single Packet test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Unordered Basic test...\n");
+	ret = unordered_basic(t);
+	if (ret != 0) {
+		printf("ERROR -  Unordered Basic test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Ordered Basic test...\n");
+	ret = ordered_basic(t);
+	if (ret != 0) {
+		printf("ERROR -  Ordered Basic test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Burst Packets test...\n");
+	ret = burst_packets(t);
+	if (ret != 0) {
+		printf("ERROR - Burst Packets test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Load Balancing test...\n");
+	ret = load_balancing(t);
+	if (ret != 0) {
+		printf("ERROR - Load Balancing test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Directed test...\n");
+	ret = test_priority_directed(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Directed test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Atomic test...\n");
+	ret = test_priority_atomic(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Atomic test FAILED.\n");
+		return ret;
+	}
+
+	printf("*** Running Prioritized Ordered test...\n");
+	ret = test_priority_ordered(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Ordered test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Prioritized Unordered test...\n");
+	ret = test_priority_unordered(t);
+	if (ret != 0) {
+		printf("ERROR - Prioritized Unordered test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Invalid QID test...\n");
+	ret = invalid_qid(t);
+	if (ret != 0) {
+		printf("ERROR - Invalid QID test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Load Balancing History test...\n");
+	ret = load_balancing_history(t);
+	if (ret != 0) {
+		printf("ERROR - Load Balancing History test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Inflight Count test...\n");
+	ret = inflight_counts(t);
+	if (ret != 0) {
+		printf("ERROR - Inflight Count test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Abuse Inflights test...\n");
+	ret = abuse_inflights(t);
+	if (ret != 0) {
+		printf("ERROR - Abuse Inflights test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running XStats test...\n");
+	ret = xstats_tests(t);
+	if (ret != 0) {
+		printf("ERROR - XStats test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running XStats ID Reset test...\n");
+	ret = xstats_id_reset_tests(t);
+	if (ret != 0) {
+		printf("ERROR - XStats ID Reset test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running XStats Brute Force test...\n");
+	ret = xstats_brute_force(t);
+	if (ret != 0) {
+		printf("ERROR - XStats Brute Force test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running XStats ID Abuse test...\n");
+	ret = xstats_id_abuse_tests(t);
+	if (ret != 0) {
+		printf("ERROR - XStats ID Abuse test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running QID Priority test...\n");
+	ret = qid_priorities(t);
+	if (ret != 0) {
+		printf("ERROR - QID Priority test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Ordered Reconfigure test...\n");
+	ret = ordered_reconfigure(t);
+	if (ret != 0) {
+		printf("ERROR - Ordered Reconfigure test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Port LB Single Reconfig test...\n");
+	ret = port_single_lb_reconfig(t);
+	if (ret != 0) {
+		printf("ERROR - Port LB Single Reconfig test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Port Reconfig Credits test...\n");
+	ret = port_reconfig_credits(t);
+	if (ret != 0) {
+		printf("ERROR - Port Reconfig Credits Reset test FAILED.\n");
+		return ret;
+	}
+	printf("*** Running Head-of-line-blocking test...\n");
+	ret = holb(t);
+	if (ret != 0) {
+		printf("ERROR - Head-of-line-blocking test FAILED.\n");
+		return ret;
+	}
+	if (rte_lcore_count() >= 3) {
+		printf("*** Running Worker loopback test...\n");
+		ret = worker_loopback(t);
+		if (ret != 0) {
+			printf("ERROR - Worker loopback test FAILED.\n");
+			return ret;
+		}
+	} else {
+		printf("### Not enough cores for worker loopback test.\n");
+		printf("### Need at least 3 cores for test.\n");
+	}
+	/*
+	 * Free test instance, leaving mempool initialized, and a pointer to it
+	 * in static eventdev_func_mempool, as it is re-used on re-runs
+	 */
+	free(t);
+
+	return 0;
+}
+
+REGISTER_TEST_COMMAND(eventdev_sw_autotest, test_sw_eventdev);
-- 
2.7.4