From: "Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>
To: Vasily Philipov <vasilyf@mellanox.com>
Cc: dev@dpdk.org, Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: Re: [dpdk-dev] [PATCH 2/2] net/mlx4: support basic flow items and actions
Date: Wed, 22 Feb 2017 09:37:42 +0100 [thread overview]
Message-ID: <20170222083742.GI23344@autoinstall.dev.6wind.com> (raw)
In-Reply-To: <7dfd4feed27ce41c118b402f0f93c4332ff05ba2.1487685098.git.vasilyf@mellanox.com>
On Tue, Feb 21, 2017 at 02:07:03PM +0000, Vasily Philipov wrote:
> Adding support for the next items: eth, vlan, ipv4, udp, tcp and for the
> next actions: queue, drop
>
> Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
> ---
> drivers/net/mlx4/Makefile | 3 +-
> drivers/net/mlx4/mlx4.c | 60 ++-
> drivers/net/mlx4/mlx4.h | 3 +
> drivers/net/mlx4/mlx4_flow.c | 1053 ++++++++++++++++++++++++++++++++++++++++++
> drivers/net/mlx4/mlx4_flow.h | 104 +++++
> 5 files changed, 1220 insertions(+), 3 deletions(-)
> create mode 100644 drivers/net/mlx4/mlx4_flow.c
> create mode 100644 drivers/net/mlx4/mlx4_flow.h
>
> diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile
> index 68c5902..1d463f7 100644
> --- a/drivers/net/mlx4/Makefile
> +++ b/drivers/net/mlx4/Makefile
> @@ -36,6 +36,7 @@ LIB = librte_pmd_mlx4.a
>
> # Sources.
> SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4.c
> +SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4_flow.c
>
> # Dependencies.
> DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_ether
> @@ -129,7 +130,7 @@ mlx4_autoconf.h: mlx4_autoconf.h.new
> cmp '$<' '$@' $(AUTOCONF_OUTPUT) || \
> mv '$<' '$@'
>
> -mlx4.o: mlx4_autoconf.h
> +$(SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD):.c=.o): mlx4_autoconf.h
>
> clean_mlx4: FORCE
> $Q rm -f -- mlx4_autoconf.h mlx4_autoconf.h.new
> diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
> index 82ccac8..cc2ebfa 100644
> --- a/drivers/net/mlx4/mlx4.c
> +++ b/drivers/net/mlx4/mlx4.c
> @@ -82,12 +82,14 @@
> #include <rte_log.h>
> #include <rte_alarm.h>
> #include <rte_memory.h>
> +#include <rte_flow.h>
>
> /* Generated configuration header. */
> #include "mlx4_autoconf.h"
>
> -/* PMD header. */
> +/* PMD headers. */
> #include "mlx4.h"
> +#include "mlx4_flow.h"
>
> /* Convenience macros for accessing mbuf fields. */
> #define NEXT(m) ((m)->next)
> @@ -2351,6 +2353,7 @@ struct txq_mp2mr_mbuf_check_data {
> assert(((uint8_t *)attr + sizeof(*attr)) == (uint8_t *)spec);
> *attr = (struct ibv_flow_attr){
> .type = IBV_FLOW_ATTR_NORMAL,
> + .priority = 3,
> .num_of_specs = 1,
> .port = priv->port,
> .flags = 0
> @@ -3936,6 +3939,7 @@ struct txq_mp2mr_mbuf_check_data {
> {
> struct priv *priv = dev->data->dev_private;
> unsigned int i = 0;
> + unsigned int err = 0;
> unsigned int r;
> struct rxq *rxq;
>
> @@ -3985,8 +3989,9 @@ struct txq_mp2mr_mbuf_check_data {
> return -ret;
> } while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
> priv_dev_interrupt_handler_install(priv, dev);
> + err = mlx4_priv_flow_start(priv);
> priv_unlock(priv);
> - return 0;
> + return -err;
> }
>
> /**
> @@ -4021,6 +4026,7 @@ struct txq_mp2mr_mbuf_check_data {
> rxq = (*priv->rxqs)[0];
> r = priv->rxqs_n;
> }
> + mlx4_priv_flow_stop(priv);
> /* Iterate only once when RSS is enabled. */
> do {
> /* Ignore nonexistent RX queues. */
> @@ -5022,6 +5028,55 @@ struct txq_mp2mr_mbuf_check_data {
> return -ret;
> }
>
> +const struct rte_flow_ops mlx4_flow_ops = {
> + .validate = mlx4_flow_validate,
> + .create = mlx4_flow_create,
> + .destroy = mlx4_flow_destroy,
> + .flush = mlx4_flow_flush,
> + .query = NULL,
> +};
> +
> +/**
> + * Manage filter operations.
> + *
> + * @param dev
> + * Pointer to Ethernet device structure.
> + * @param filter_type
> + * Filter type.
> + * @param filter_op
> + * Operation to perform.
> + * @param arg
> + * Pointer to operation-specific structure.
> + *
> + * @return
> + * 0 on success, negative errno value on failure.
> + */
> +static int
> +mlx4_dev_filter_ctrl(struct rte_eth_dev *dev,
> + enum rte_filter_type filter_type,
> + enum rte_filter_op filter_op,
> + void *arg)
> +{
> + int ret = EINVAL;
> +
> + switch (filter_type) {
> + case RTE_ETH_FILTER_GENERIC:
> + if (filter_op != RTE_ETH_FILTER_GET)
> + return -EINVAL;
> + *(const void **)arg = &mlx4_flow_ops;
> + return 0;
> + case RTE_ETH_FILTER_FDIR:
> + DEBUG("%p: filter type FDIR is not supported by this PMD",
> + (void *)dev);
> + break;
> + default:
> + ERROR("%p: filter type (%d) not supported",
> + (void *)dev, filter_type);
> + break;
> + }
> + return -ret;
> +}
> +
> static const struct eth_dev_ops mlx4_dev_ops = {
> .dev_configure = mlx4_dev_configure,
> .dev_start = mlx4_dev_start,
> @@ -5056,6 +5111,7 @@ struct txq_mp2mr_mbuf_check_data {
> .mac_addr_add = mlx4_mac_addr_add,
> .mac_addr_set = mlx4_mac_addr_set,
> .mtu_set = mlx4_dev_set_mtu,
> + .filter_ctrl = mlx4_dev_filter_ctrl,
> };
>
> /**
> diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
> index 70c9ecd..fac408b 100644
> --- a/drivers/net/mlx4/mlx4.h
> +++ b/drivers/net/mlx4/mlx4.h
> @@ -295,6 +295,8 @@ struct txq {
> struct ibv_exp_res_domain *rd; /* Resource Domain. */
> };
>
> +struct rte_flow;
> +
> struct priv {
> struct rte_eth_dev *dev; /* Ethernet device. */
> struct ibv_context *ctx; /* Verbs context. */
> @@ -337,6 +339,7 @@ struct priv {
> struct rxq *(*rxqs)[]; /* RX queues. */
> struct txq *(*txqs)[]; /* TX queues. */
> struct rte_intr_handle intr_handle; /* Interrupt handler. */
> + LIST_HEAD(mlx4_flows, rte_flow) flows;
> rte_spinlock_t lock; /* Lock for control functions. */
> };
>
> diff --git a/drivers/net/mlx4/mlx4_flow.c b/drivers/net/mlx4/mlx4_flow.c
> new file mode 100644
> index 0000000..2328a18
> --- /dev/null
> +++ b/drivers/net/mlx4/mlx4_flow.c
> @@ -0,0 +1,1053 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <assert.h>
> +
> +/* Verbs header. */
> +/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic ignored "-Wpedantic"
> +#endif
> +#include <infiniband/verbs.h>
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic error "-Wpedantic"
> +#endif
> +
> +#include <rte_flow.h>
> +#include <rte_flow_driver.h>
> +#include <rte_malloc.h>
> +
> +/* Generated configuration header. */
> +#include "mlx4_autoconf.h"
> +
> +/* PMD headers. */
> +#include "mlx4.h"
> +#include "mlx4_flow.h"
> +
> +/** Static initializer for items. */
> +#define ITEMS(...) \
> + (const enum rte_flow_item_type []){ \
> + __VA_ARGS__, RTE_FLOW_ITEM_TYPE_END, \
> + }
> +
> +/** Structure to generate a simple graph of layers supported by the NIC. */
> +struct mlx4_flow_items {
> + /** List of possible actions for these items. */
> + const enum rte_flow_action_type *const actions;
> + /** Bit-masks corresponding to the possibilities for the item. */
> + const void *mask;
> + /**
> + * Default bit-masks to use when item->mask is not provided. When
> + * \default_mask is also NULL, the full supported bit-mask (\mask) is
> + * used instead.
> + */
> + const void *default_mask;
> + /** Bit-masks size in bytes. */
> + const unsigned int mask_sz;
> + /**
> + * Check support for a given item.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param mask[in]
> + * Bit-masks covering supported fields to compare with spec,
> + * last and mask in
> + * \item.
> + * @param size
> + * Bit-Mask size in bytes.
> + *
> + * @return
> + * 0 on success, negative value otherwise.
> + */
> + int (*validate)(const struct rte_flow_item *item,
> + const uint8_t *mask, unsigned int size);
> + /**
> + * Conversion function from rte_flow to NIC specific flow.
> + *
> + * @param item
> + * rte_flow item to convert.
> + * @param default_mask
> + * Default bit-masks to use when item->mask is not provided.
> + * @param data
> + * Internal structure to store the conversion.
> + *
> + * @return
> + * 0 on success, negative value otherwise.
> + */
> + int (*convert)(const struct rte_flow_item *item,
> + const void *default_mask,
> + void *data);
> + /** Size in bytes of the destination structure. */
> + const unsigned int dst_sz;
> + /** List of possible following items. */
> + const enum rte_flow_item_type *const items;
> +};
> +
> +/** Valid action for this PMD. */
> +static const enum rte_flow_action_type valid_actions[] = {
> + RTE_FLOW_ACTION_TYPE_DROP,
> + RTE_FLOW_ACTION_TYPE_QUEUE,
> + RTE_FLOW_ACTION_TYPE_END,
> +};
> +
> +/**
> + * Convert Ethernet item to Verbs specification.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param default_mask[in]
> + * Default bit-masks to use when item->mask is not provided.
> + * @param data[in, out]
> + * User structure.
> + */
> +static int
> +mlx4_flow_create_eth(const struct rte_flow_item *item,
> + const void *default_mask,
> + void *data)
> +{
> + const struct rte_flow_item_eth *spec = item->spec;
> + const struct rte_flow_item_eth *mask = item->mask;
> + struct mlx4_flow *flow = (struct mlx4_flow *)data;
> + struct ibv_flow_spec_eth *eth;
> + const unsigned int eth_size = sizeof(struct ibv_flow_spec_eth);
> + unsigned int i;
> +
> + ++flow->ibv_attr->num_of_specs;
> + flow->ibv_attr->priority = 2;
> + eth = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
> + *eth = (struct ibv_flow_spec_eth) {
> + .type = IBV_FLOW_SPEC_ETH,
> + .size = eth_size,
> + };
> + if (!spec) {
> + flow->ibv_attr->type = IBV_FLOW_ATTR_ALL_DEFAULT;
> + return 0;
> + }
> + if (!mask)
> + mask = default_mask;
> + memcpy(eth->val.dst_mac, spec->dst.addr_bytes, ETHER_ADDR_LEN);
> + memcpy(eth->val.src_mac, spec->src.addr_bytes, ETHER_ADDR_LEN);
> + memcpy(eth->mask.dst_mac, mask->dst.addr_bytes, ETHER_ADDR_LEN);
> + memcpy(eth->mask.src_mac, mask->src.addr_bytes, ETHER_ADDR_LEN);
> + /* Remove unwanted bits from values. */
> + for (i = 0; i < ETHER_ADDR_LEN; ++i) {
> + eth->val.dst_mac[i] &= eth->mask.dst_mac[i];
> + eth->val.src_mac[i] &= eth->mask.src_mac[i];
> + }
> + return 0;
> +}
> +
> +/**
> + * Convert VLAN item to Verbs specification.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param default_mask[in]
> + * Default bit-masks to use when item->mask is not provided.
> + * @param data[in, out]
> + * User structure.
> + */
> +static int
> +mlx4_flow_create_vlan(const struct rte_flow_item *item,
> + const void *default_mask,
> + void *data)
> +{
> + const struct rte_flow_item_vlan *spec = item->spec;
> + const struct rte_flow_item_vlan *mask = item->mask;
> + struct mlx4_flow *flow = (struct mlx4_flow *)data;
> + struct ibv_flow_spec_eth *eth;
> + const unsigned int eth_size = sizeof(struct ibv_flow_spec_eth);
> +
> + eth = (void *)((uintptr_t)flow->ibv_attr + flow->offset - eth_size);
> + if (!spec)
> + return 0;
> + if (!mask)
> + mask = default_mask;
> + eth->val.vlan_tag = spec->tci;
> + eth->mask.vlan_tag = mask->tci;
> + eth->val.vlan_tag &= eth->mask.vlan_tag;
> + return 0;
> +}
> +
> +/**
> + * Convert IPv4 item to Verbs specification.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param default_mask[in]
> + * Default bit-masks to use when item->mask is not provided.
> + * @param data[in, out]
> + * User structure.
> + */
> +static int
> +mlx4_flow_create_ipv4(const struct rte_flow_item *item,
> + const void *default_mask,
> + void *data)
> +{
> + const struct rte_flow_item_ipv4 *spec = item->spec;
> + const struct rte_flow_item_ipv4 *mask = item->mask;
> + struct mlx4_flow *flow = (struct mlx4_flow *)data;
> + struct ibv_flow_spec_ipv4 *ipv4;
> + unsigned int ipv4_size = sizeof(struct ibv_flow_spec_ipv4);
> +
> + ++flow->ibv_attr->num_of_specs;
> + flow->ibv_attr->priority = 1;
> + ipv4 = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
> + *ipv4 = (struct ibv_flow_spec_ipv4) {
> + .type = IBV_FLOW_SPEC_IPV4,
> + .size = ipv4_size,
> + };
> + if (!spec)
> + return 0;
> + ipv4->val = (struct ibv_flow_ipv4_filter) {
> + .src_ip = spec->hdr.src_addr,
> + .dst_ip = spec->hdr.dst_addr,
> + };
> + if (!mask)
> + mask = default_mask;
> + ipv4->mask = (struct ibv_flow_ipv4_filter) {
> + .src_ip = mask->hdr.src_addr,
> + .dst_ip = mask->hdr.dst_addr,
> + };
> + /* Remove unwanted bits from values. */
> + ipv4->val.src_ip &= ipv4->mask.src_ip;
> + ipv4->val.dst_ip &= ipv4->mask.dst_ip;
> + return 0;
> +}
> +
> +/**
> + * Convert UDP item to Verbs specification.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param default_mask[in]
> + * Default bit-masks to use when item->mask is not provided.
> + * @param data[in, out]
> + * User structure.
> + */
> +static int
> +mlx4_flow_create_udp(const struct rte_flow_item *item,
> + const void *default_mask,
> + void *data)
> +{
> + const struct rte_flow_item_udp *spec = item->spec;
> + const struct rte_flow_item_udp *mask = item->mask;
> + struct mlx4_flow *flow = (struct mlx4_flow *)data;
> + struct ibv_flow_spec_tcp_udp *udp;
> + unsigned int udp_size = sizeof(struct ibv_flow_spec_tcp_udp);
> +
> + ++flow->ibv_attr->num_of_specs;
> + flow->ibv_attr->priority = 0;
> + udp = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
> + *udp = (struct ibv_flow_spec_tcp_udp) {
> + .type = IBV_FLOW_SPEC_UDP,
> + .size = udp_size,
> + };
> + if (!spec)
> + return 0;
> + udp->val.dst_port = spec->hdr.dst_port;
> + udp->val.src_port = spec->hdr.src_port;
> + if (!mask)
> + mask = default_mask;
> + udp->mask.dst_port = mask->hdr.dst_port;
> + udp->mask.src_port = mask->hdr.src_port;
> + /* Remove unwanted bits from values. */
> + udp->val.src_port &= udp->mask.src_port;
> + udp->val.dst_port &= udp->mask.dst_port;
> + return 0;
> +}
> +
> +/**
> + * Convert TCP item to Verbs specification.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param default_mask[in]
> + * Default bit-masks to use when item->mask is not provided.
> + * @param data[in, out]
> + * User structure.
> + */
> +static int
> +mlx4_flow_create_tcp(const struct rte_flow_item *item,
> + const void *default_mask,
> + void *data)
> +{
> + const struct rte_flow_item_tcp *spec = item->spec;
> + const struct rte_flow_item_tcp *mask = item->mask;
> + struct mlx4_flow *flow = (struct mlx4_flow *)data;
> + struct ibv_flow_spec_tcp_udp *tcp;
> + unsigned int tcp_size = sizeof(struct ibv_flow_spec_tcp_udp);
> +
> + ++flow->ibv_attr->num_of_specs;
> + flow->ibv_attr->priority = 0;
> + tcp = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
> + *tcp = (struct ibv_flow_spec_tcp_udp) {
> + .type = IBV_FLOW_SPEC_TCP,
> + .size = tcp_size,
> + };
> + if (!spec)
> + return 0;
> + tcp->val.dst_port = spec->hdr.dst_port;
> + tcp->val.src_port = spec->hdr.src_port;
> + if (!mask)
> + mask = default_mask;
> + tcp->mask.dst_port = mask->hdr.dst_port;
> + tcp->mask.src_port = mask->hdr.src_port;
> + /* Remove unwanted bits from values. */
> + tcp->val.src_port &= tcp->mask.src_port;
> + tcp->val.dst_port &= tcp->mask.dst_port;
> + return 0;
> +}
> +
> +/**
> + * Check support for a given item.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param mask[in]
> + * Bit-masks covering supported fields to compare with spec, last and mask in
> + * \item.
> + * @param size
> + * Bit-Mask size in bytes.
> + *
> + * @return
> + * 0 on success, negative value otherwise.
> + */
> +static int
> +mlx4_flow_item_validate(const struct rte_flow_item *item,
> + const uint8_t *mask, unsigned int size)
> +{
> + int ret = 0;
> +
> + if (!item->spec && (item->mask || item->last))
> + return -1;
> + if (item->spec && !item->mask) {
> + unsigned int i;
> + const uint8_t *spec = item->spec;
> +
> + for (i = 0; i < size; ++i)
> + if ((spec[i] | mask[i]) != mask[i])
> + return -1;
> + }
> + if (item->last && !item->mask) {
> + unsigned int i;
> + const uint8_t *spec = item->last;
> +
> + for (i = 0; i < size; ++i)
> + if ((spec[i] | mask[i]) != mask[i])
> + return -1;
> + }
> + if (item->spec && item->last) {
> + uint8_t spec[size];
> + uint8_t last[size];
> + const uint8_t *apply = mask;
> + unsigned int i;
> +
> + if (item->mask)
> + apply = item->mask;
> + for (i = 0; i < size; ++i) {
> + spec[i] = ((const uint8_t *)item->spec)[i] & apply[i];
> + last[i] = ((const uint8_t *)item->last)[i] & apply[i];
> + }
> + ret = memcmp(spec, last, size);
> + }
> + return ret;
> +}
> +
> +static int
> +mlx4_flow_validate_eth(const struct rte_flow_item *item,
> + const uint8_t *mask, unsigned int size)
> +{
> + if (item->mask) {
> + const struct rte_flow_item_eth *mask = item->mask;
> +
> + if (mask->dst.addr_bytes[0] != 0xff ||
> + mask->dst.addr_bytes[1] != 0xff ||
> + mask->dst.addr_bytes[2] != 0xff ||
> + mask->dst.addr_bytes[3] != 0xff ||
> + mask->dst.addr_bytes[4] != 0xff ||
> + mask->dst.addr_bytes[5] != 0xff)
> + return -1;
> + }
> + return mlx4_flow_item_validate(item, mask, size);
> +}
> +
> +static int
> +mlx4_flow_validate_vlan(const struct rte_flow_item *item,
> + const uint8_t *mask, unsigned int size)
> +{
> + if (item->mask) {
> + const struct rte_flow_item_vlan *mask = item->mask;
> +
> + if (mask->tci != 0 &&
> + ntohs(mask->tci) != 0x0fff)
> + return -1;
> + }
> + return mlx4_flow_item_validate(item, mask, size);
> +}
> +
> +static int
> +mlx4_flow_validate_ipv4(const struct rte_flow_item *item,
> + const uint8_t *mask, unsigned int size)
> +{
> + if (item->mask) {
> + const struct rte_flow_item_ipv4 *mask = item->mask;
> +
> + if (mask->hdr.src_addr != 0 &&
> + mask->hdr.src_addr != 0xffffffff)
> + return -1;
> + if (mask->hdr.dst_addr != 0 &&
> + mask->hdr.dst_addr != 0xffffffff)
> + return -1;
> + }
> + return mlx4_flow_item_validate(item, mask, size);
> +}
> +
> +static int
> +mlx4_flow_validate_udp(const struct rte_flow_item *item,
> + const uint8_t *mask, unsigned int size)
> +{
> + if (item->mask) {
> + const struct rte_flow_item_udp *mask = item->mask;
> +
> + if (mask->hdr.src_port != 0 &&
> + mask->hdr.src_port != 0xffff)
> + return -1;
> + if (mask->hdr.dst_port != 0 &&
> + mask->hdr.dst_port != 0xffff)
> + return -1;
> + }
> + return mlx4_flow_item_validate(item, mask, size);
> +}
> +
> +static int
> +mlx4_flow_validate_tcp(const struct rte_flow_item *item,
> + const uint8_t *mask, unsigned int size)
> +{
> + if (item->mask) {
> + const struct rte_flow_item_tcp *mask = item->mask;
> +
> + if (mask->hdr.src_port != 0 &&
> + mask->hdr.src_port != 0xffff)
> + return -1;
> + if (mask->hdr.dst_port != 0 &&
> + mask->hdr.dst_port != 0xffff)
> + return -1;
> + }
> + return mlx4_flow_item_validate(item, mask, size);
> +}
> +
> +/** Graph of supported items and associated actions. */
> +static const struct mlx4_flow_items mlx4_flow_items[] = {
> + [RTE_FLOW_ITEM_TYPE_END] = {
> + .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH),
> + },
> + [RTE_FLOW_ITEM_TYPE_ETH] = {
> + .items = ITEMS(RTE_FLOW_ITEM_TYPE_VLAN,
> + RTE_FLOW_ITEM_TYPE_IPV4),
> + .actions = valid_actions,
> + .mask = &(const struct rte_flow_item_eth){
> + .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
> + .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
> + },
> + .default_mask = &rte_flow_item_eth_mask,
> + .mask_sz = sizeof(struct rte_flow_item_eth),
> + .validate = mlx4_flow_validate_eth,
> + .convert = mlx4_flow_create_eth,
> + .dst_sz = sizeof(struct ibv_flow_spec_eth),
> + },
> + [RTE_FLOW_ITEM_TYPE_VLAN] = {
> + .items = ITEMS(RTE_FLOW_ITEM_TYPE_IPV4),
> + .actions = valid_actions,
> + .mask = &(const struct rte_flow_item_vlan){
> + /* rte_flow_item_vlan_mask is invalid for mlx4. */
> +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> + .tci = 0x0fff,
> +#else
> + .tci = 0xff0f,
> +#endif
> + },
> + .mask_sz = sizeof(struct rte_flow_item_vlan),
> + .validate = mlx4_flow_validate_vlan,
> + .convert = mlx4_flow_create_vlan,
> + .dst_sz = 0,
> + },
> + [RTE_FLOW_ITEM_TYPE_IPV4] = {
> + .items = ITEMS(RTE_FLOW_ITEM_TYPE_UDP,
> + RTE_FLOW_ITEM_TYPE_TCP),
> + .actions = valid_actions,
> + .mask = &(const struct rte_flow_item_ipv4){
> + .hdr = {
> + .src_addr = -1,
> + .dst_addr = -1,
> + },
> + },
> + .default_mask = &rte_flow_item_ipv4_mask,
> + .mask_sz = sizeof(struct rte_flow_item_ipv4),
> + .validate = mlx4_flow_validate_ipv4,
> + .convert = mlx4_flow_create_ipv4,
> + .dst_sz = sizeof(struct ibv_flow_spec_ipv4),
> + },
> + [RTE_FLOW_ITEM_TYPE_UDP] = {
> + .actions = valid_actions,
> + .mask = &(const struct rte_flow_item_udp){
> + .hdr = {
> + .src_port = -1,
> + .dst_port = -1,
> + },
> + },
> + .default_mask = &rte_flow_item_udp_mask,
> + .mask_sz = sizeof(struct rte_flow_item_udp),
> + .validate = mlx4_flow_validate_udp,
> + .convert = mlx4_flow_create_udp,
> + .dst_sz = sizeof(struct ibv_flow_spec_tcp_udp),
> + },
> + [RTE_FLOW_ITEM_TYPE_TCP] = {
> + .actions = valid_actions,
> + .mask = &(const struct rte_flow_item_tcp){
> + .hdr = {
> + .src_port = -1,
> + .dst_port = -1,
> + },
> + },
> + .default_mask = &rte_flow_item_tcp_mask,
> + .mask_sz = sizeof(struct rte_flow_item_tcp),
> + .validate = mlx4_flow_validate_tcp,
> + .convert = mlx4_flow_create_tcp,
> + .dst_sz = sizeof(struct ibv_flow_spec_tcp_udp),
> + },
> +};
> +
> +/**
> + * Validate a flow supported by the NIC.
> + *
> + * @param priv
> + * Pointer to private structure.
> + * @param[in] attr
> + * Flow rule attributes.
> + * @param[in] items
> + * Pattern specification (list terminated by the END pattern item).
> + * @param[in] actions
> + * Associated actions (list terminated by the END action).
> + * @param[out] error
> + * Perform verbose error reporting if not NULL.
> + * @param[in, out] flow
> + * Flow structure to update.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +priv_flow_validate(struct priv *priv,
> + const struct rte_flow_attr *attr,
> + const struct rte_flow_item items[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error,
> + struct mlx4_flow *flow)
> +{
> + const struct mlx4_flow_items *cur_item = mlx4_flow_items;
> + struct mlx4_flow_action action = {
> + .queue = 0,
> + .drop = 0,
> + };
> +
> + (void)priv;
> + if (attr->group) {
> + rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
> + NULL,
> + "groups are not supported");
> + return -rte_errno;
> + }
> + if (attr->priority) {
> + rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
> + NULL,
> + "priorities are not supported");
> + return -rte_errno;
> + }
> + if (attr->egress) {
> + rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> + NULL,
> + "egress is not supported");
> + return -rte_errno;
> + }
> + if (!attr->ingress) {
> + rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> + NULL,
> + "only ingress is supported");
> + return -rte_errno;
> + }
> + /* Go over items list. */
> + for (; items->type != RTE_FLOW_ITEM_TYPE_END; ++items) {
> + const struct mlx4_flow_items *token = NULL;
> + unsigned int i;
> + int err;
> +
> + if (items->type == RTE_FLOW_ITEM_TYPE_VOID)
> + continue;
> + /*
> + * The nic can support patterns with NULL eth spec only
> + * if eth is a single item in a rule.
> + */
> + if (!items->spec &&
> + items->type == RTE_FLOW_ITEM_TYPE_ETH) {
> + const struct rte_flow_item *next = items + 1;
> +
> + if (next->type != RTE_FLOW_ITEM_TYPE_END) {
> + rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + items,
> + "the rule requires"
> + " an Ethernet spec");
> + return -rte_errno;
> + }
> + }
> + for (i = 0;
> + cur_item->items &&
> + cur_item->items[i] != RTE_FLOW_ITEM_TYPE_END;
> + ++i) {
> + if (cur_item->items[i] == items->type) {
> + token = &mlx4_flow_items[items->type];
> + break;
> + }
> + }
> + if (!token)
> + goto exit_item_not_supported;
> + cur_item = token;
> + err = cur_item->validate(items,
> + (const uint8_t *)cur_item->mask,
> + cur_item->mask_sz);
> + if (err)
> + goto exit_item_not_supported;
> + if (flow->ibv_attr && cur_item->convert) {
> + err = cur_item->convert(items,
> + (cur_item->default_mask ?
> + cur_item->default_mask :
> + cur_item->mask),
> + flow);
> + if (err)
> + goto exit_item_not_supported;
> + }
> + flow->offset += cur_item->dst_sz;
> + }
> + /* Go over actions list */
> + for (; actions->type != RTE_FLOW_ACTION_TYPE_END; ++actions) {
> + if (actions->type == RTE_FLOW_ACTION_TYPE_VOID) {
> + continue;
> + } else if (actions->type == RTE_FLOW_ACTION_TYPE_DROP) {
> + action.drop = 1;
> + } else if (actions->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> + const struct rte_flow_action_queue *queue =
> + (const struct rte_flow_action_queue *)
> + actions->conf;
> +
> + if (!queue || (queue->index > (priv->rxqs_n - 1)))
> + goto exit_action_not_supported;
> + action.queue = 1;
> + } else {
> + goto exit_action_not_supported;
> + }
> + }
> + if (!action.queue && !action.drop) {
> + rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_HANDLE,
> + NULL, "no valid action");
> + return -rte_errno;
> + }
> + return 0;
> +exit_item_not_supported:
> + rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM,
> + items, "item not supported");
> + return -rte_errno;
> +exit_action_not_supported:
> + rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
> + actions, "action not supported");
> + return -rte_errno;
> +}
> +
> +/**
> + * Validate a flow supported by the NIC.
> + *
> + * @see rte_flow_validate()
> + * @see rte_flow_ops
> + */
> +int
> +mlx4_flow_validate(struct rte_eth_dev *dev,
> + const struct rte_flow_attr *attr,
> + const struct rte_flow_item items[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error)
> +{
> + struct priv *priv = dev->data->dev_private;
> + int ret;
> + struct mlx4_flow flow = { .offset = sizeof(struct ibv_flow_attr) };
> +
> + priv_lock(priv);
> + ret = priv_flow_validate(priv, attr, items, actions, error, &flow);
> + priv_unlock(priv);
> + return ret;
> +}
> +
> +/**
> + * Complete flow rule creation.
> + *
> + * @param priv
> + * Pointer to private structure.
> + * @param ibv_attr
> + * Verbs flow attributes.
> + * @param action
> + * Target action structure.
> + * @param[out] error
> + * Perform verbose error reporting if not NULL.
> + *
> + * @return
> + * A flow if the rule could be created.
> + */
> +static struct rte_flow *
> +priv_flow_create_action_queue(struct priv *priv,
> + struct ibv_flow_attr *ibv_attr,
> + struct mlx4_flow_action *action,
> + struct rte_flow_error *error)
> +{
> + struct rxq *rxq;
> + struct ibv_qp *qp;
> + struct rte_flow *rte_flow;
> +
> + assert(priv->pd);
> + assert(priv->ctx);
> + rte_flow = rte_calloc(__func__, 1, sizeof(*rte_flow), 0);
> + if (!rte_flow) {
> + rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
> + NULL, "cannot allocate flow memory");
> + return NULL;
> + }
> + rxq = (*priv->rxqs)[action->queue_id];
> + if (action->drop) {
> + rte_flow->cq =
> + ibv_exp_create_cq(priv->ctx, 1, NULL, NULL, 0,
> + &(struct ibv_exp_cq_init_attr){
> + .comp_mask = 0,
> + });
> + if (!rte_flow->cq) {
> + rte_flow_error_set(error, ENOMEM,
> + RTE_FLOW_ERROR_TYPE_HANDLE,
> + NULL, "cannot allocate CQ");
> + goto error;
> + }
> + rte_flow->qp = ibv_exp_create_qp(
> + priv->ctx,
> + &(struct ibv_exp_qp_init_attr){
> + .send_cq = rte_flow->cq,
> + .recv_cq = rte_flow->cq,
> + .cap = {
> + .max_recv_wr = 1,
> + .max_recv_sge = 1,
> + },
> + .qp_type = IBV_QPT_RAW_PACKET,
> + .comp_mask =
> + IBV_EXP_QP_INIT_ATTR_PD |
> + IBV_EXP_QP_INIT_ATTR_PORT |
> + IBV_EXP_QP_INIT_ATTR_RES_DOMAIN,
> + .pd = priv->pd,
> + .res_domain = rxq->rd,
> + .port_num = priv->port,
> + });
> + if (!rte_flow->qp) {
> + rte_flow_error_set(error, ENOMEM,
> + RTE_FLOW_ERROR_TYPE_HANDLE,
> + NULL, "cannot allocate QP");
> + goto error;
> + }
> + qp = rte_flow->qp;
> + } else {
> + rte_flow->rxq = rxq;
> + qp = rxq->qp;
> + }
> + rte_flow->ibv_attr = ibv_attr;
> + rte_flow->ibv_flow = ibv_create_flow(qp, rte_flow->ibv_attr);
> + if (!rte_flow->ibv_flow) {
> + rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
> + NULL, "flow rule creation failure");
> + goto error;
> + }
> + return rte_flow;
> +
> +error:
> + assert(rte_flow);
> + if (rte_flow->cq)
> + ibv_destroy_cq(rte_flow->cq);
> + if (rte_flow->qp)
> + ibv_destroy_qp(rte_flow->qp);
> + rte_free(rte_flow->ibv_attr);
> + rte_free(rte_flow);
> + return NULL;
> +}
> +
> +/**
> + * Convert a flow.
> + *
> + * @param priv
> + * Pointer to private structure.
> + * @param[in] attr
> + * Flow rule attributes.
> + * @param[in] items
> + * Pattern specification (list terminated by the END pattern item).
> + * @param[in] actions
> + * Associated actions (list terminated by the END action).
> + * @param[out] error
> + * Perform verbose error reporting if not NULL.
> + *
> + * @return
> + * A flow on success, NULL otherwise.
> + */
> +static struct rte_flow *
> +priv_flow_create(struct priv *priv,
> + const struct rte_flow_attr *attr,
> + const struct rte_flow_item items[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error)
> +{
> + struct rte_flow *rte_flow;
> + struct mlx4_flow_action action;
> + struct mlx4_flow flow = { .offset = sizeof(struct ibv_flow_attr), };
> + int err;
> +
> + err = priv_flow_validate(priv, attr, items, actions, error, &flow);
> + if (err)
> + return NULL;
> + flow.ibv_attr = rte_malloc(__func__, flow.offset, 0);
> + if (!flow.ibv_attr) {
> + rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
> + NULL, "cannot allocate ibv_attr memory");
> + return NULL;
> + }
> + flow.offset = sizeof(struct ibv_flow_attr);
> + *flow.ibv_attr = (struct ibv_flow_attr){
> + .comp_mask = 0,
> + .type = IBV_FLOW_ATTR_NORMAL,
> + .size = sizeof(struct ibv_flow_attr),
> + .priority = attr->priority,
> + .num_of_specs = 0,
> + .port = priv->port,
> + .flags = 0,
> + };
> + claim_zero(priv_flow_validate(priv, attr, items, actions,
> + error, &flow));
> + action = (struct mlx4_flow_action){
> + .queue = 0,
> + .drop = 0,
> + };
> + for (; actions->type != RTE_FLOW_ACTION_TYPE_END; ++actions) {
> + if (actions->type == RTE_FLOW_ACTION_TYPE_VOID) {
> + continue;
> + } else if (actions->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> + action.queue = 1;
> + action.queue_id =
> + ((const struct rte_flow_action_queue *)
> + actions->conf)->index;
> + } else if (actions->type == RTE_FLOW_ACTION_TYPE_DROP) {
> + action.drop = 1;
> + } else {
> + rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + actions, "unsupported action");
> + goto exit;
> + }
> + }
> + rte_flow = priv_flow_create_action_queue(priv, flow.ibv_attr,
> + &action, error);
> + return rte_flow;
> +exit:
> + rte_free(flow.ibv_attr);
> + return NULL;
> +}
> +
> +/**
> + * Create a flow.
> + *
> + * @see rte_flow_create()
> + * @see rte_flow_ops
> + */
> +struct rte_flow *
> +mlx4_flow_create(struct rte_eth_dev *dev,
> + const struct rte_flow_attr *attr,
> + const struct rte_flow_item items[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error)
> +{
> + struct priv *priv = dev->data->dev_private;
> + struct rte_flow *flow;
> +
> + priv_lock(priv);
> + flow = priv_flow_create(priv, attr, items, actions, error);
> + if (flow) {
> + LIST_INSERT_HEAD(&priv->flows, flow, next);
> + DEBUG("Flow created %p", (void *)flow);
> + }
> + priv_unlock(priv);
> + return flow;
> +}
> +
> +/**
> + * Destroy a flow.
> + *
> + * @param priv
> + * Pointer to private structure.
> + * @param[in] flow
> + * Flow to destroy.
> + */
> +static void
> +priv_flow_destroy(struct priv *priv, struct rte_flow *flow)
> +{
> + (void)priv;
> + LIST_REMOVE(flow, next);
> + if (flow->ibv_flow)
> + claim_zero(ibv_destroy_flow(flow->ibv_flow));
> + if (flow->qp)
> + claim_zero(ibv_destroy_qp(flow->qp));
> + if (flow->cq)
> + claim_zero(ibv_destroy_cq(flow->cq));
> + rte_free(flow->ibv_attr);
> + DEBUG("Flow destroyed %p", (void *)flow);
> + rte_free(flow);
> +}
> +
> +/**
> + * Destroy a flow.
> + *
> + * @see rte_flow_destroy()
> + * @see rte_flow_ops
> + */
> +int
> +mlx4_flow_destroy(struct rte_eth_dev *dev,
> + struct rte_flow *flow,
> + struct rte_flow_error *error)
> +{
> + struct priv *priv = dev->data->dev_private;
> +
> + (void)error;
> + priv_lock(priv);
> + priv_flow_destroy(priv, flow);
> + priv_unlock(priv);
> + return 0;
> +}
> +
> +/**
> + * Destroy all flows.
> + *
> + * @param priv
> + * Pointer to private structure.
> + */
> +static void
> +priv_flow_flush(struct priv *priv)
> +{
> + while (!LIST_EMPTY(&priv->flows)) {
> + struct rte_flow *flow;
> +
> + flow = LIST_FIRST(&priv->flows);
> + priv_flow_destroy(priv, flow);
> + }
> +}
> +
> +/**
> + * Destroy all flows.
> + *
> + * @see rte_flow_flush()
> + * @see rte_flow_ops
> + */
> +int
> +mlx4_flow_flush(struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> +{
> + struct priv *priv = dev->data->dev_private;
> +
> + (void)error;
> + priv_lock(priv);
> + priv_flow_flush(priv);
> + priv_unlock(priv);
> + return 0;
> +}
> +
> +/**
> + * Remove all flows.
> + *
> + * Called by dev_stop() to remove all flows.
> + *
> + * @param priv
> + * Pointer to private structure.
> + */
> +void
> +mlx4_priv_flow_stop(struct priv *priv)
> +{
> + struct rte_flow *flow;
> +
> + for (flow = LIST_FIRST(&priv->flows);
> + flow;
> + flow = LIST_NEXT(flow, next)) {
> + claim_zero(ibv_destroy_flow(flow->ibv_flow));
> + flow->ibv_flow = NULL;
> + DEBUG("Flow %p removed", (void *)flow);
> + }
> +}
> +
> +/**
> + * Add all flows.
> + *
> + * @param priv
> + * Pointer to private structure.
> + *
> + * @return
> + * 0 on success, a errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx4_priv_flow_start(struct priv *priv)
> +{
> + struct ibv_qp *qp;
> + struct rte_flow *flow;
> +
> + for (flow = LIST_FIRST(&priv->flows);
> + flow;
> + flow = LIST_NEXT(flow, next)) {
> + qp = flow->qp ? flow->qp : flow->rxq->qp;
> + flow->ibv_flow = ibv_create_flow(qp, flow->ibv_attr);
> + if (!flow->ibv_flow) {
> + DEBUG("Flow %p cannot be applied", (void *)flow);
> + rte_errno = EINVAL;
> + return rte_errno;
> + }
> + DEBUG("Flow %p applied", (void *)flow);
> + }
> + return 0;
> +}
> diff --git a/drivers/net/mlx4/mlx4_flow.h b/drivers/net/mlx4/mlx4_flow.h
> new file mode 100644
> index 0000000..537ffdf
> --- /dev/null
> +++ b/drivers/net/mlx4/mlx4_flow.h
> @@ -0,0 +1,104 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef RTE_PMD_MLX4_FLOW_H_
> +#define RTE_PMD_MLX4_FLOW_H_
> +
> +#include <stddef.h>
> +#include <stdint.h>
> +#include <sys/queue.h>
> +
> +/* Verbs header. */
> +/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic ignored "-Wpedantic"
> +#endif
> +#include <infiniband/verbs.h>
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic error "-Wpedantic"
> +#endif
> +
> +#include <rte_flow.h>
> +#include <rte_flow_driver.h>
> +#include <rte_byteorder.h>
> +
> +#include "mlx4.h"
> +
> +struct rte_flow {
> + LIST_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
> + struct rxq *rxq; /**< Pointer to the queue, NULL if drop queue. */
> + struct ibv_flow *ibv_flow; /**< Verbs flow. */
> + struct ibv_flow_attr *ibv_attr; /**< Pointer to Verbs attributes. */
> + struct ibv_qp *qp; /**< Verbs queue pair. */
> + struct ibv_cq *cq; /**< Verbs completion queue. */
> +};
> +
> +int
> +mlx4_flow_validate(struct rte_eth_dev *dev,
> + const struct rte_flow_attr *attr,
> + const struct rte_flow_item items[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error);
> +
> +struct rte_flow *
> +mlx4_flow_create(struct rte_eth_dev *dev,
> + const struct rte_flow_attr *attr,
> + const struct rte_flow_item items[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error);
> +
> +int
> +mlx4_flow_destroy(struct rte_eth_dev *,
> + struct rte_flow *,
> + struct rte_flow_error *);
> +
> +int
> +mlx4_flow_flush(struct rte_eth_dev *dev,
> + struct rte_flow_error *error);
> +
> +/** Structure to pass to the conversion function. */
> +struct mlx4_flow {
> + struct ibv_flow_attr *ibv_attr; /**< Verbs attribute. */
> + unsigned int offset; /**< Offset in bytes in the ibv_attr buffer. */
> +};
> +
> +struct mlx4_flow_action {
> + uint32_t drop:1; /**< Target is a drop queue. */
> + uint32_t queue:1; /**< Target is a receive queue. */
> + uint32_t queue_id; /**< Identifier of the queue. */
> +};
> +
> +int mlx4_priv_flow_start(struct priv *);
> +void mlx4_priv_flow_stop(struct priv *);
> +
> +#endif /* RTE_PMD_MLX4_FLOW_H_ */
> --
> 1.8.3.1
>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
--
Nélio Laranjeiro
6WIND
next prev parent reply other threads:[~2017-02-22 8:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-21 14:07 [dpdk-dev] [PATCH 1/2] net/mlx4: split the definitions to the header file Vasily Philipov
2017-02-21 14:07 ` [dpdk-dev] [PATCH 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-02-22 8:37 ` Nélio Laranjeiro [this message]
2017-02-22 10:10 ` Nélio Laranjeiro
2017-02-22 8:37 ` [dpdk-dev] [PATCH 1/2] net/mlx4: split the definitions to the header file Nélio Laranjeiro
2017-02-22 13:42 ` [dpdk-dev] [PATCH v2 " Vasily Philipov
2017-02-22 19:04 ` Ferruh Yigit
2017-02-23 10:44 ` Vasily Philipov
2017-03-06 9:24 ` Ferruh Yigit
2017-02-22 13:42 ` [dpdk-dev] [PATCH v2 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-03-05 7:51 ` [dpdk-dev] [PATCH v3 1/2] net/mlx4: split the definitions to the header file Vasily Philipov
2017-03-20 9:19 ` Nélio Laranjeiro
2017-03-20 14:18 ` Ferruh Yigit
2017-03-05 7:51 ` [dpdk-dev] [PATCH v3 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-03-20 9:19 ` Nélio Laranjeiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170222083742.GI23344@autoinstall.dev.6wind.com \
--to=nelio.laranjeiro@6wind.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=vasilyf@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).