DPDK patches and discussions
 help / color / mirror / Atom feed
From: Aaron Conole <aconole@redhat.com>
To: dev@dpdk.org
Cc: Bruce Richardson <bruce.richardson@intel.com>,
	Thomas Monjalon <thomas.monjalon@6wind.com>,
	Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH v7 07/14] eal: do not panic on a number of conditions
Date: Wed, 22 Mar 2017 16:19:33 -0400	[thread overview]
Message-ID: <20170322201940.24028-8-aconole@redhat.com> (raw)
In-Reply-To: <20170322201940.24028-1-aconole@redhat.com>

When log initialization fails, it's generally because the fopencookie
failed.  While this is rare in practice, it could happen, and it is
likely because of memory pressure.  So, flag the error, and allow the
user to retry.

Memory init can only fail when access to hugepages (either as primary or
secondary process) fails (and that is usually permissions).  Since the
manner of failure is not reversible, we cannot allow retry.

There are some theoretical racy conditions in the system that _could_
cause early tailq init to fail;  however, no need to panic the
application.  While it can't continue using DPDK, it could make better
alerts to the user.

rte_eal_alarm_init() call uses the linux timerfd framework to create a
poll()-able timer using standard posix file operations.  This could fail
for a few reasons given in the man-pages, but many could be
corrected by the user application.  No need to panic.

Signed-off-by: Aaron Conole <aconole@redhat.com>
---
 lib/librte_eal/bsdapp/eal/eal.c           | 21 +++++++++++++-----
 lib/librte_eal/common/eal_common_tailqs.c |  3 +--
 lib/librte_eal/linuxapp/eal/eal.c         | 37 ++++++++++++++++++++++---------
 3 files changed, 43 insertions(+), 18 deletions(-)

diff --git a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/bsdapp/eal/eal.c
index ea76d40..b893dc1 100644
--- a/lib/librte_eal/bsdapp/eal/eal.c
+++ b/lib/librte_eal/bsdapp/eal/eal.c
@@ -569,8 +569,11 @@ rte_eal_init(int argc, char **argv)
 
 	rte_config_init();
 
-	if (rte_eal_memory_init() < 0)
-		rte_panic("Cannot init memory\n");
+	if (rte_eal_memory_init() < 0) {
+		rte_eal_init_alert("Cannot init memory\n");
+		rte_errno = ENOMEM;
+		return -1;
+	}
 
 	if (rte_eal_memzone_init() < 0) {
 		rte_eal_init_alert("Cannot init memzone\n");
@@ -578,11 +581,17 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_tailqs_init() < 0)
-		rte_panic("Cannot init tail queues for objects\n");
+	if (rte_eal_tailqs_init() < 0) {
+		rte_eal_init_alert("Cannot init tail queues for objects\n");
+		rte_errno = EFAULT;
+		return -1;
+	}
 
-	if (rte_eal_alarm_init() < 0)
-		rte_panic("Cannot init interrupt-handling thread\n");
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread\n");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
 
 	if (rte_eal_intr_init() < 0)
 		rte_panic("Cannot init interrupt-handling thread\n");
diff --git a/lib/librte_eal/common/eal_common_tailqs.c b/lib/librte_eal/common/eal_common_tailqs.c
index bb08ec8..4f69828 100644
--- a/lib/librte_eal/common/eal_common_tailqs.c
+++ b/lib/librte_eal/common/eal_common_tailqs.c
@@ -188,8 +188,7 @@ rte_eal_tailqs_init(void)
 		if (t->head == NULL) {
 			RTE_LOG(ERR, EAL,
 				"Cannot initialize tailq: %s\n", t->name);
-			/* no need to TAILQ_REMOVE, we are going to panic in
-			 * rte_eal_init() */
+			/* TAILQ_REMOVE not needed, error is already fatal */
 			goto fail;
 		}
 	}
diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c
index 564cac3..bfb8260 100644
--- a/lib/librte_eal/linuxapp/eal/eal.c
+++ b/lib/librte_eal/linuxapp/eal/eal.c
@@ -825,19 +825,30 @@ rte_eal_init(int argc, char **argv)
 
 	rte_config_init();
 
-	if (rte_eal_log_init(logid, internal_config.syslog_facility) < 0)
-		rte_panic("Cannot init logs\n");
+	if (rte_eal_log_init(logid, internal_config.syslog_facility) < 0) {
+		rte_eal_init_alert("Cannot init logging.");
+		rte_errno = ENOMEM;
+		rte_atomic32_clear(&run_once);
+		return -1;
+	}
 
 	if (rte_eal_pci_init() < 0)
 		rte_panic("Cannot init PCI\n");
 
 #ifdef VFIO_PRESENT
-	if (rte_eal_vfio_setup() < 0)
-		rte_panic("Cannot init VFIO\n");
+	if (rte_eal_vfio_setup() < 0) {
+		rte_eal_init_alert("Cannot init VFIO\n");
+		rte_errno = EAGAIN;
+		rte_atomic32_clear(&run_once);
+		return -1;
+	}
 #endif
 
-	if (rte_eal_memory_init() < 0)
-		rte_panic("Cannot init memory\n");
+	if (rte_eal_memory_init() < 0) {
+		rte_eal_init_alert("Cannot init memory\n");
+		rte_errno = ENOMEM;
+		return -1;
+	}
 
 	/* the directories are locked during eal_hugepage_info_init */
 	eal_hugedirs_unlock();
@@ -848,11 +859,17 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_tailqs_init() < 0)
-		rte_panic("Cannot init tail queues for objects\n");
+	if (rte_eal_tailqs_init() < 0) {
+		rte_eal_init_alert("Cannot init tail queues for objects\n");
+		rte_errno = EFAULT;
+		return -1;
+	}
 
-	if (rte_eal_alarm_init() < 0)
-		rte_panic("Cannot init interrupt-handling thread\n");
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread\n");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
 
 	if (rte_eal_timer_init() < 0)
 		rte_panic("Cannot init HPET or TSC timers\n");
-- 
2.9.3

  parent reply	other threads:[~2017-03-22 20:19 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-22 20:19 [dpdk-dev] [PATCH v7 00/14] eal: Remove most causes of panic on init Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 01/14] eal: do not panic on cpu detection Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 02/14] eal: do not panic when CPU isn't supported Aaron Conole
2017-03-23 13:47   ` Bruce Richardson
2017-03-23 14:27     ` Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 03/14] eal: do not panic on hugepage info init Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 04/14] eal: do not panic if parsing args returns error Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 05/14] eal: do not panic on memzone initialization fails Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 06/14] eal: set errno when exiting for already called Aaron Conole
2017-03-22 20:19 ` Aaron Conole [this message]
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 08/14] eal: do not panic on timer init failure Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 09/14] eal: do not panic on interrupt thread init Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 10/14] eal: do not error if plugins fail to init Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 11/14] eal: do not panic on PCI failures Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 12/14] eal: do not panic if vdev init fails Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 13/14] eal: do not panic when bus probe/scan fails Aaron Conole
2017-03-22 20:19 ` [dpdk-dev] [PATCH v7 14/14] rte_eal_init: add info about various error codes Aaron Conole
2017-03-23 14:04 ` [dpdk-dev] [PATCH v7 00/14] eal: Remove most causes of panic on init Bruce Richardson
2017-03-27 14:06   ` Thomas Monjalon
2017-03-31 17:54     ` Aaron Conole

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170322201940.24028-8-aconole@redhat.com \
    --to=aconole@redhat.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=stephen@networkplumber.org \
    --cc=thomas.monjalon@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).