[dpdk-dev] [PATCH v6 07/13] bus/fslmc: add packet frame list entry definitions

[<akhil.goyal@nxp.com>]

From: Akhil Goyal <akhil.goyal@nxp.com>

Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
---
 drivers/bus/fslmc/portal/dpaa2_hw_pvt.h     | 25 +++++++++++++++++++++++++
 drivers/bus/fslmc/rte_bus_fslmc_version.map |  1 +
 2 files changed, 26 insertions(+)

diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index ec71314..46e2b66 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -147,8 +147,11 @@ struct qbman_fle {
 } while (0)
 #define DPAA2_SET_FD_LEN(fd, length)	(fd)->simple.len = length
 #define DPAA2_SET_FD_BPID(fd, bpid)	((fd)->simple.bpid_offset |= bpid)
+#define DPAA2_SET_FD_IVP(fd)   ((fd->simple.bpid_offset |= 0x00004000))
 #define DPAA2_SET_FD_OFFSET(fd, offset)	\
 	((fd->simple.bpid_offset |= (uint32_t)(offset) << 16))
+#define DPAA2_SET_FD_INTERNAL_JD(fd, len) fd->simple.frc = (0x80000000 | (len))
+#define DPAA2_SET_FD_FRC(fd, frc)	fd->simple.frc = frc
 #define DPAA2_RESET_FD_CTRL(fd)	(fd)->simple.ctrl = 0
 
 #define	DPAA2_SET_FD_ASAL(fd, asal)	((fd)->simple.ctrl |= (asal << 16))
@@ -156,12 +159,32 @@ struct qbman_fle {
 	fd->simple.flc_lo = lower_32_bits((uint64_t)(addr));	\
 	fd->simple.flc_hi = upper_32_bits((uint64_t)(addr));	\
 } while (0)
+#define DPAA2_SET_FLE_INTERNAL_JD(fle, len) (fle->frc = (0x80000000 | (len)))
+#define DPAA2_GET_FLE_ADDR(fle)					\
+	(uint64_t)((((uint64_t)(fle->addr_hi)) << 32) + fle->addr_lo)
+#define DPAA2_SET_FLE_ADDR(fle, addr) do { \
+	fle->addr_lo = lower_32_bits((uint64_t)addr);     \
+	fle->addr_hi = upper_32_bits((uint64_t)addr);	  \
+} while (0)
+#define DPAA2_SET_FLE_OFFSET(fle, offset) \
+	((fle)->fin_bpid_offset |= (uint32_t)(offset) << 16)
+#define DPAA2_SET_FLE_BPID(fle, bpid) ((fle)->fin_bpid_offset |= (uint64_t)bpid)
+#define DPAA2_GET_FLE_BPID(fle, bpid) (fle->fin_bpid_offset & 0x000000ff)
+#define DPAA2_SET_FLE_FIN(fle)	(fle->fin_bpid_offset |= (uint64_t)1 << 31)
+#define DPAA2_SET_FLE_IVP(fle)   (((fle)->fin_bpid_offset |= 0x00004000))
+#define DPAA2_SET_FD_COMPOUND_FMT(fd)	\
+	(fd->simple.bpid_offset |= (uint32_t)1 << 28)
 #define DPAA2_GET_FD_ADDR(fd)	\
 ((uint64_t)((((uint64_t)((fd)->simple.addr_hi)) << 32) + (fd)->simple.addr_lo))
 
 #define DPAA2_GET_FD_LEN(fd)	((fd)->simple.len)
 #define DPAA2_GET_FD_BPID(fd)	(((fd)->simple.bpid_offset & 0x00003FFF))
+#define DPAA2_GET_FD_IVP(fd)   ((fd->simple.bpid_offset & 0x00004000) >> 14)
 #define DPAA2_GET_FD_OFFSET(fd)	(((fd)->simple.bpid_offset & 0x0FFF0000) >> 16)
+#define DPAA2_SET_FLE_SG_EXT(fle) (fle->fin_bpid_offset |= (uint64_t)1 << 29)
+#define DPAA2_IS_SET_FLE_SG_EXT(fle)	\
+	((fle->fin_bpid_offset & ((uint64_t)1 << 29)) ? 1 : 0)
+
 #define DPAA2_INLINE_MBUF_FROM_BUF(buf, meta_data_size) \
 	((struct rte_mbuf *)((uint64_t)(buf) - (meta_data_size)))
 
@@ -216,6 +239,7 @@ static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr)
  */
 
 #define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_physaddr)
+#define DPAA2_OP_VADDR_TO_IOVA(op) (op->phys_addr)
 
 /**
  * macro to convert Virtual address to IOVA
@@ -236,6 +260,7 @@ static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr)
 #else	/* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */
 
 #define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_addr)
+#define DPAA2_OP_VADDR_TO_IOVA(op) (op)
 #define DPAA2_VADDR_TO_IOVA(_vaddr) (_vaddr)
 #define DPAA2_IOVA_TO_VADDR(_iova) (_iova)
 #define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type)
diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/rte_bus_fslmc_version.map
index a55b250..2db0fce 100644
--- a/drivers/bus/fslmc/rte_bus_fslmc_version.map
+++ b/drivers/bus/fslmc/rte_bus_fslmc_version.map
@@ -24,6 +24,7 @@ DPDK_17.05 {
 	per_lcore__dpaa2_io;
 	qbman_check_command_complete;
 	qbman_eq_desc_clear;
+	qbman_eq_desc_set_fq;
 	qbman_eq_desc_set_no_orp;
 	qbman_eq_desc_set_qd;
 	qbman_eq_desc_set_response;
-- 
2.9.3