* [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more
@ 2017-03-28 3:48 Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 01/28] bnxt: add hwrm_func_cfg_input/output structures Ajit Khaparde
` (28 more replies)
0 siblings, 29 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev, ajit.khaparde
Apart from adding support for VF-PF/PF-VF communication, new dev_ops,
few bug fixes and improve debug capabilities, this patchset updates
the driver to the newer HWRM version 1.7.4
New dev_ops supported:
set_mc_addr_list, xstats_get/reset, mac_addr_set, vlan_filter_set,
vlan_strip_queue_set, vlan_offload_set, udp_tunnel_port_add/del
bug fixes:
use only long BDs in Tx path to avoid a potential bug in hardware,
fix interrupt handler, set the VMDQ pool size correctly
Derived from an autogenerated file, the last patch updates the
HWRM version to 1.7.4
Ajit Khaparde:
[01/28] bnxt: add hwrm_func_cfg_input/output structures
[04/28] bnxt: add new HWRM commands
[06/28] bnxt: add new HWRM commands to query VNIC info
[09/28] bnxt: add code to support VF QOS configuration
[14/28] bnxt: Add support for udp_tunnel_port_add/del dev_ops
[15/28] bnxt: Update tx offload capabilities
[16/28] bnxt: add support for set VF MAC anti spoof
[20/28] bnxt: Add support to set VF rxmode
[23/28] bnxt: Add support for VLAN filter and strip dev_ops
[24/28] bnxt: Add support for mac_addr_set dev_op
[25/28] bnxt: add support for xstats
[26/28] bnxt: use only long BDs in Tx path
[27/28] bnxt: add support for set_mc_addr_list dev_op
[28/28] bnxt: update to HWRM version 1.7.4
Stephen Hurd:
[02/28] bnxt: add code to support PF, VF configuration
[03/28] bnxt: add additonal HWRM debug info to error messages
[05/28] bnxt: add support for PF/VF communications
[10/28] bnxt: support for VF VLAN filtering
[11/28] bnxt: set the VMDQ pool size correctly
[12/28] bnxt: improve some of the log messages
[13/28] bnxt: fix interrupt handler
[17/28] bnxt: implement VF VLAN stripq functionality
[18/28] bnxt: support lack of huge pages
[19/28] bnxt: add code to configure a default VF VLAN
[21/28] bnxt: Add VF stats get/reset functions
[22/28] bnxt: Add newlines to all RTE_LOG() format strings
Steeven Li:
[07/28] bnxt: add functions for tx_loopback and queues_drop_en
[08/28] bnxt: support setting VF mac address
Please apply.
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 01/28] bnxt: add hwrm_func_cfg_input/output structures
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 02/28] bnxt: add code to support PF, VF configuration Ajit Khaparde
` (27 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
This patch adds hwrm_func_cfg API which allows the configuration
of a child VF by its parent PF driver. It an also be used to configure a
PF by its corresponding PF driver.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/hsi_struct_def_dpdk.h | 427 +++++++++++++++++++++++++++++++++
1 file changed, 427 insertions(+)
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index f024837..0635dd2 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -88,6 +88,7 @@ struct ctx_hw_stats64 {
#define HWRM_FUNC_RESET (UINT32_C(0x11))
#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
#define HWRM_FUNC_QCFG (UINT32_C(0x16))
+#define HWRM_FUNC_CFG (UINT32_C(0x17))
#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
#define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
@@ -2261,6 +2262,432 @@ struct hwrm_func_qcfg_output {
*/
} __attribute__((packed));
+/* hwrm_func_cfg */
+/*
+ * Description: This command allows configuration of a PF by the corresponding
+ * PF driver. This command also allows configuration of a child VF by its parent
+ * PF driver. The input FID value is used to indicate what function is being
+ * configured. This allows a PF driver to configure the PF owned by itself or a
+ * virtual function that is a child of the PF. This command allows to reserve
+ * resources for a VF by its parent PF. To reverse the process, the command
+ * should be called with all enables flags cleared for resources. This will free
+ * allocated resources for the VF and return them to the resource pool. If this
+ * command is requested by a VF driver to configure or reserve resources, then
+ * the HWRM shall fail this command. If default MAC address and/or VLAN are
+ * provided in this command, then the HWRM shall set up appropriate MAC/VLAN
+ * filters for the function that is being configured. If source properties
+ * checks are enabled and default MAC address and/or IP address are provided in
+ * this command, then the HWRM shall set appropriate source property checks
+ * based on provided MAC and/or IP addresses. The parent PF driver should not
+ * set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by
+ * the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the
+ * HWRM should ignore it. A function's MTU/MRU should be set prior to allocating
+ * RX VNICs or TX rings. A PF driver calls hwrm_func_cfg to allocate resources
+ * for itself or its children VFs. All function drivers shall call hwrm_func_cfg
+ * to reserve resources. A request to hwrm_func_cfg may not be fully granted;
+ * that is, a request for resources may be larger than what can be supported by
+ * the device and the HWRM will allocate the best set of resources available,
+ * but that may be less than requested. If all the amounts requested could not
+ * be fulfilled, the HWRM shall allocate what it could and return a status code
+ * of success. A function driver should call hwrm_func_qcfg immediately after
+ * hwrm_func_cfg to determine what resources were assigned to the configured
+ * function. A call by a PF driver to hwrm_func_cfg to allocate resources for
+ * itself shall only allocate resources for the PF driver to use, not for its
+ * children VFs. Likewise, a call to hwrm_func_qcfg shall return the resources
+ * available for the PF driver to use, not what is available to its children
+ * VFs.
+ */
+/* Input (88 bytes) */
+struct hwrm_func_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being configured. If set
+ * to 0xFF... (All Fs), then the the configuration is for the
+ * requesting function.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function is disabled with source
+ * MAC address check. This is an anti-spoofing check. If this
+ * flag is set, then the function shall be configured to
+ * disallow transmission of frames with the source MAC address
+ * that is configured for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is enabled with source MAC
+ * address check. This is an anti-spoofing check. If this flag
+ * is set, then the function shall be configured to allow
+ * transmission of frames with the source MAC address that is
+ * configured for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \
+ UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK UINT32_C(0x1fc)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then standard TX ring mode is requested to be
+ * enabled on the function being configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \
+ UINT32_C(0x200)
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then the standard TX ring mode is requested to be
+ * disabled on the function being configured. In this extended
+ * TX ring resource mode, the minimum and maximum bandwidth
+ * settings are not supported to allow the allocation of TX
+ * rings to span multiple scheduler nodes.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \
+ UINT32_C(0x400)
+ uint32_t enables;
+ /* This bit must be '1' for the mtu field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the num_rsscos_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the num_cmpl_rings field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS UINT32_C(0x8)
+ /* This bit must be '1' for the num_tx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS UINT32_C(0x10)
+ /* This bit must be '1' for the num_rx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS UINT32_C(0x20)
+ /* This bit must be '1' for the num_l2_ctxs field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS UINT32_C(0x40)
+ /* This bit must be '1' for the num_vnics field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the num_stat_ctxs field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the dflt_mac_addr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x200)
+ /* This bit must be '1' for the dflt_vlan field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN UINT32_C(0x400)
+ /* This bit must be '1' for the dflt_ip_addr field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR UINT32_C(0x800)
+ /* This bit must be '1' for the min_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW UINT32_C(0x1000)
+ /* This bit must be '1' for the max_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the async_event_cr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the vlan_antispoof_mode field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the allowed_vlan_pris field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000)
+ /* This bit must be '1' for the evb_mode field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the num_mcast_filters field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the num_hw_ring_grps field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000)
+ uint16_t mtu;
+ /*
+ * The maximum transmission unit of the function. The HWRM
+ * should make sure that the mtu of the function does not exceed
+ * the mtu of the physical port that this function is associated
+ * with. In addition to configuring mtu per function, it is
+ * possible to configure mtu per transmit ring. By default, the
+ * mtu of each transmit ring associated with a function is equal
+ * to the mtu of the function. The HWRM should make sure that
+ * the mtu of each transmit ring that is assigned to a function
+ * has a valid mtu.
+ */
+ uint16_t mru;
+ /*
+ * The maximum receive unit of the function. The HWRM should
+ * make sure that the mru of the function does not exceed the
+ * mru of the physical port that this function is associated
+ * with. In addition to configuring mru per function, it is
+ * possible to configure mru per vnic. By default, the mru of
+ * each vnic associated with a function is equal to the mru of
+ * the function. The HWRM should make sure that the mru of each
+ * vnic that is assigned to a function has a valid mru.
+ */
+ uint16_t num_rsscos_ctxs;
+ /* The number of RSS/COS contexts requested for the function. */
+ uint16_t num_cmpl_rings;
+ /*
+ * The number of completion rings requested for the function.
+ * This does not include the rings allocated to any children
+ * functions if any.
+ */
+ uint16_t num_tx_rings;
+ /*
+ * The number of transmit rings requested for the function. This
+ * does not include the rings allocated to any children
+ * functions if any.
+ */
+ uint16_t num_rx_rings;
+ /*
+ * The number of receive rings requested for the function. This
+ * does not include the rings allocated to any children
+ * functions if any.
+ */
+ uint16_t num_l2_ctxs;
+ /* The requested number of L2 contexts for the function. */
+ uint16_t num_vnics;
+ /* The requested number of vnics for the function. */
+ uint16_t num_stat_ctxs;
+ /* The requested number of statistic contexts for the function. */
+ uint16_t num_hw_ring_grps;
+ /*
+ * The number of HW ring groups that should be reserved for this
+ * function.
+ */
+ uint8_t dflt_mac_addr[6];
+ /* The default MAC address for the function being configured. */
+ uint16_t dflt_vlan;
+ /*
+ * The default VLAN for the function being configured. This
+ * field's format is same as 802.1Q Tag's Tag Control
+ * Information (TCI) format that includes both Priority Code
+ * Point (PCP) and VLAN Identifier (VID).
+ */
+ uint32_t dflt_ip_addr[4];
+ /*
+ * The default IP address for the function being configured.
+ * This address is only used in enabling source property check.
+ */
+ uint32_t min_bw;
+ /*
+ * Minimum BW allocated for this function. The HWRM will
+ * translate this value into byte counter and time interval used
+ * for the scheduler inside the device.
+ */
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \
+ FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
+ FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
+ uint32_t max_bw;
+ /*
+ * Maximum BW allocated for this function. The HWRM will
+ * translate this value into byte counter and time interval used
+ * for the scheduler inside the device.
+ */
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \
+ FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ uint16_t async_event_cr;
+ /*
+ * ID of the target completion ring for receiving asynchronous
+ * event completions. If this field is not valid, then the HWRM
+ * shall use the default completion ring of the function that is
+ * being configured as the target completion ring for providing
+ * any asynchronous event completions for that function. If this
+ * field is valid, then the HWRM shall use the completion ring
+ * identified by this ID as the target completion ring for
+ * providing any asynchronous event completions for the function
+ * that is being configured.
+ */
+ uint8_t vlan_antispoof_mode;
+ /* VLAN Anti-spoofing mode. */
+ /* No VLAN anti-spoofing checks are enabled */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK UINT32_C(0x0)
+ /* Validate VLAN against the configured VLAN(s) */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \
+ UINT32_C(0x1)
+ /* Insert VLAN if it does not exist, otherwise discard */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \
+ UINT32_C(0x2)
+ /*
+ * Insert VLAN if it does not exist, override
+ * VLAN if it exists
+ */
+ #define \
+ HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \
+ UINT32_C(0x3)
+ uint8_t allowed_vlan_pris;
+ /*
+ * This bit field defines VLAN PRIs that are allowed on this
+ * function. If nth bit is set, then VLAN PRI n is allowed on
+ * this function.
+ */
+ uint8_t evb_mode;
+ /*
+ * The HWRM shall allow a PF driver to change EVB mode for the
+ * partition it belongs to. The HWRM shall not allow a VF driver
+ * to change the EVB mode. The HWRM shall take into account the
+ * switching of EVB mode from one to another and reconfigure
+ * hardware resources as appropriately. The switching from VEB
+ * to VEPA mode requires the disabling of the loopback traffic.
+ * Additionally, source knock outs are handled differently in
+ * VEB and VEPA modes.
+ */
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ uint8_t unused_2;
+ uint16_t num_mcast_filters;
+ /*
+ * The number of multicast filters that should be reserved for
+ * this function on the RX side.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_drv_rgtr */
/*
* Description: This command is used by the function driver to register its
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 02/28] bnxt: add code to support PF, VF configuration
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 01/28] bnxt: add hwrm_func_cfg_input/output structures Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 03/28] bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
` (26 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
This patch adds some code while also reorganizing some of the existing code
to configure resources for a PCI function. Key changes in the patch:
1) Move the function reset HWRM call to init path from dev_start path.
2) Eliminate unused bnxt_vf_info structure.
3) Set aside resources like Tx, Rx rings, MAC adde count, stats context
etc.. for VFs
4) Fix PF resource allocation when there are no VFs.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt.h | 34 ++---
drivers/net/bnxt/bnxt_ethdev.c | 65 ++++++---
drivers/net/bnxt/bnxt_filter.c | 30 +---
drivers/net/bnxt/bnxt_hwrm.c | 324 +++++++++++++++++++++++++++++++++++++----
drivers/net/bnxt/bnxt_hwrm.h | 2 +
drivers/net/bnxt/bnxt_vnic.c | 40 +----
6 files changed, 355 insertions(+), 140 deletions(-)
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 4418c7f..7fa0d8a 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -54,41 +54,20 @@ enum bnxt_hw_context {
HW_CONTEXT_IS_LB = 3,
};
-struct bnxt_vf_info {
- uint16_t fw_fid;
- uint8_t mac_addr[ETHER_ADDR_LEN];
- uint16_t max_rsscos_ctx;
- uint16_t max_cp_rings;
- uint16_t max_tx_rings;
- uint16_t max_rx_rings;
- uint16_t max_l2_ctx;
- uint16_t max_vnics;
- uint16_t vlan;
- struct bnxt_pf_info *pf;
-};
-
struct bnxt_pf_info {
#define BNXT_FIRST_PF_FID 1
#define BNXT_MAX_VFS(bp) (bp->pf.max_vfs)
#define BNXT_FIRST_VF_FID 128
#define BNXT_PF_RINGS_USED(bp) bnxt_get_num_queues(bp)
#define BNXT_PF_RINGS_AVAIL(bp) (bp->pf.max_cp_rings - BNXT_PF_RINGS_USED(bp))
- uint32_t fw_fid;
+
uint8_t port_id;
- uint8_t mac_addr[ETHER_ADDR_LEN];
- uint16_t max_rsscos_ctx;
- uint16_t max_cp_rings;
- uint16_t max_tx_rings;
- uint16_t max_rx_rings;
- uint16_t max_l2_ctx;
- uint16_t max_vnics;
uint16_t first_vf_id;
uint16_t active_vfs;
uint16_t max_vfs;
void *vf_req_buf;
phys_addr_t vf_req_buf_dma_addr;
uint32_t vf_req_fwd[8];
- struct bnxt_vf_info *vf;
};
/* Max wait time is 10 * 100ms = 1s */
@@ -174,8 +153,17 @@ struct bnxt {
struct bnxt_link_info link_info;
struct bnxt_cos_queue_info cos_queue[BNXT_COS_QUEUE_COUNT];
+ uint16_t fw_fid;
+ uint8_t dflt_mac_addr[ETHER_ADDR_LEN];
+ uint16_t max_rsscos_ctx;
+ uint16_t max_cp_rings;
+ uint16_t max_tx_rings;
+ uint16_t max_rx_rings;
+ uint16_t max_l2_ctx;
+ uint16_t max_vnics;
+ uint16_t max_stat_ctx;
+ uint16_t vlan;
struct bnxt_pf_info pf;
- struct bnxt_vf_info vf;
uint8_t port_partition_type;
uint8_t dev_stopped;
};
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 6167443..667ba12 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -340,18 +340,12 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
dev_info->max_hash_mac_addrs = 0;
/* PF/VF specifics */
- if (BNXT_PF(bp)) {
- dev_info->max_rx_queues = bp->pf.max_rx_rings;
- dev_info->max_tx_queues = bp->pf.max_tx_rings;
- dev_info->max_vfs = bp->pf.active_vfs;
- dev_info->reta_size = bp->pf.max_rsscos_ctx;
- max_vnics = bp->pf.max_vnics;
- } else {
- dev_info->max_rx_queues = bp->vf.max_rx_rings;
- dev_info->max_tx_queues = bp->vf.max_tx_rings;
- dev_info->reta_size = bp->vf.max_rsscos_ctx;
- max_vnics = bp->vf.max_vnics;
- }
+ if (BNXT_PF(bp))
+ dev_info->max_vfs = bp->pf.max_vfs;
+ dev_info->max_rx_queues = bp->max_rx_rings;
+ dev_info->max_tx_queues = bp->max_tx_rings;
+ dev_info->reta_size = bp->max_rsscos_ctx;
+ max_vnics = bp->max_vnics;
/* Fast path specifics */
dev_info->min_rx_bufsize = 1;
@@ -483,12 +477,6 @@ static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
int rc;
bp->dev_stopped = 0;
- rc = bnxt_hwrm_func_reset(bp);
- if (rc) {
- RTE_LOG(ERR, PMD, "hwrm chip reset failure rc: %x\n", rc);
- rc = -1;
- goto error;
- }
rc = bnxt_setup_int(bp);
if (rc)
@@ -1091,6 +1079,8 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
bp = eth_dev->data->dev_private;
+ bp->dev_stopped = 1;
+
if (bnxt_vf_pciid(pci_dev->id.device_id))
bp->flags |= BNXT_FLAG_VF;
@@ -1123,6 +1113,11 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
RTE_LOG(ERR, PMD, "hwrm query capability failure rc: %x\n", rc);
goto error_free;
}
+ if (bp->max_tx_rings == 0) {
+ RTE_LOG(ERR, PMD, "No TX rings available!\n");
+ rc = -EBUSY;
+ goto error_free;
+ }
eth_dev->data->mac_addrs = rte_zmalloc("bnxt_mac_addr_tbl",
ETHER_ADDR_LEN * MAX_NUM_MAC_ADDR, 0);
if (eth_dev->data->mac_addrs == NULL) {
@@ -1133,10 +1128,7 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
goto error_free;
}
/* Copy the permanent MAC from the qcap response address now. */
- if (BNXT_PF(bp))
- memcpy(bp->mac_addr, bp->pf.mac_addr, sizeof(bp->mac_addr));
- else
- memcpy(bp->mac_addr, bp->vf.mac_addr, sizeof(bp->mac_addr));
+ memcpy(bp->mac_addr, bp->dflt_mac_addr, sizeof(bp->mac_addr));
memcpy(ð_dev->data->mac_addrs[0], bp->mac_addr, ETHER_ADDR_LEN);
bp->grp_info = rte_zmalloc("bnxt_grp_info",
sizeof(*bp->grp_info) * bp->max_ring_grps, 0);
@@ -1162,7 +1154,34 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
pci_dev->mem_resource[0].phys_addr,
pci_dev->mem_resource[0].addr);
- bp->dev_stopped = 0;
+ rc = bnxt_hwrm_func_reset(bp);
+ if (rc) {
+ RTE_LOG(ERR, PMD, "hwrm chip reset failure rc: %x\n", rc);
+ rc = -1;
+ goto error_free;
+ }
+
+ if (BNXT_PF(bp)) {
+ if (bp->pf.active_vfs) {
+ RTE_LOG(ERR, PMD, "PF has %d active VFs\n",
+ bp->pf.active_vfs);
+ // TODO: Deallocate VF resources?
+ }
+ if (bp->pdev->max_vfs) {
+ rc = bnxt_hwrm_allocate_vfs(bp, bp->pdev->max_vfs);
+ if (rc) {
+ RTE_LOG(ERR, PMD, "Failed to allocate VFs\n");
+ goto error_free;
+ }
+ } else {
+ rc = bnxt_hwrm_allocate_pf_only(bp);
+ if (rc) {
+ RTE_LOG(ERR, PMD,
+ "Failed to allocate PF resources\n");
+ goto error_free;
+ }
+ }
+ }
return 0;
diff --git a/drivers/net/bnxt/bnxt_filter.c b/drivers/net/bnxt/bnxt_filter.c
index df1042c..137c7b7 100644
--- a/drivers/net/bnxt/bnxt_filter.c
+++ b/drivers/net/bnxt/bnxt_filter.c
@@ -73,15 +73,7 @@ void bnxt_init_filters(struct bnxt *bp)
struct bnxt_filter_info *filter;
int i, max_filters;
- if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- max_filters = pf->max_l2_ctx;
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- max_filters = vf->max_l2_ctx;
- }
+ max_filters = bp->max_l2_ctx;
STAILQ_INIT(&bp->free_filter_list);
for (i = 0; i < max_filters; i++) {
filter = &bp->filter_info[i];
@@ -122,15 +114,7 @@ void bnxt_free_filter_mem(struct bnxt *bp)
return;
/* Ensure that all filters are freed */
- if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- max_filters = pf->max_l2_ctx;
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- max_filters = vf->max_l2_ctx;
- }
+ max_filters = bp->max_l2_ctx;
for (i = 0; i < max_filters; i++) {
filter = &bp->filter_info[i];
if (filter->fw_l2_filter_id != ((uint64_t)-1)) {
@@ -155,15 +139,7 @@ int bnxt_alloc_filter_mem(struct bnxt *bp)
struct bnxt_filter_info *filter_mem;
uint16_t max_filters;
- if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- max_filters = pf->max_l2_ctx;
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- max_filters = vf->max_l2_ctx;
- }
+ max_filters = bp->max_l2_ctx;
/* Allocate memory for VNIC pool and filter pool */
filter_mem = rte_zmalloc("bnxt_filter_info",
max_filters * sizeof(struct bnxt_filter_info),
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 3849d1a..2a24610 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -286,32 +286,21 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
bp->max_ring_grps = rte_le_to_cpu_32(resp->max_hw_ring_grps);
if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- pf->fw_fid = rte_le_to_cpu_32(resp->fid);
- pf->port_id = resp->port_id;
- memcpy(pf->mac_addr, resp->mac_address, ETHER_ADDR_LEN);
- pf->max_rsscos_ctx = rte_le_to_cpu_16(resp->max_rsscos_ctx);
- pf->max_cp_rings = rte_le_to_cpu_16(resp->max_cmpl_rings);
- pf->max_tx_rings = rte_le_to_cpu_16(resp->max_tx_rings);
- pf->max_rx_rings = rte_le_to_cpu_16(resp->max_rx_rings);
- pf->max_l2_ctx = rte_le_to_cpu_16(resp->max_l2_ctxs);
- pf->max_vnics = rte_le_to_cpu_16(resp->max_vnics);
- pf->first_vf_id = rte_le_to_cpu_16(resp->first_vf_id);
- pf->max_vfs = rte_le_to_cpu_16(resp->max_vfs);
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- vf->fw_fid = rte_le_to_cpu_32(resp->fid);
- memcpy(vf->mac_addr, &resp->mac_address, ETHER_ADDR_LEN);
- vf->max_rsscos_ctx = rte_le_to_cpu_16(resp->max_rsscos_ctx);
- vf->max_cp_rings = rte_le_to_cpu_16(resp->max_cmpl_rings);
- vf->max_tx_rings = rte_le_to_cpu_16(resp->max_tx_rings);
- vf->max_rx_rings = rte_le_to_cpu_16(resp->max_rx_rings);
- vf->max_l2_ctx = rte_le_to_cpu_16(resp->max_l2_ctxs);
- vf->max_vnics = rte_le_to_cpu_16(resp->max_vnics);
+ bp->pf.port_id = resp->port_id;
+ bp->pf.first_vf_id = rte_le_to_cpu_16(resp->first_vf_id);
+ bp->pf.max_vfs = rte_le_to_cpu_16(resp->max_vfs);
}
+ bp->fw_fid = rte_le_to_cpu_32(resp->fid);
+ memcpy(bp->dflt_mac_addr, &resp->mac_address, ETHER_ADDR_LEN);
+ bp->max_rsscos_ctx = rte_le_to_cpu_16(resp->max_rsscos_ctx);
+ bp->max_cp_rings = rte_le_to_cpu_16(resp->max_cmpl_rings);
+ bp->max_tx_rings = rte_le_to_cpu_16(resp->max_tx_rings);
+ bp->max_rx_rings = rte_le_to_cpu_16(resp->max_rx_rings);
+ bp->max_l2_ctx = rte_le_to_cpu_16(resp->max_l2_ctxs);
+ bp->max_vnics = rte_le_to_cpu_16(resp->max_vnics);
+ bp->max_stat_ctx = rte_le_to_cpu_16(resp->max_stat_ctx);
+
return rc;
}
@@ -345,7 +334,8 @@ int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
HWRM_PREP(req, FUNC_DRV_RGTR, -1, resp);
req.flags = flags;
req.enables = HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER |
- HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD;
+ HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD |
+ HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD;
req.ver_maj = RTE_VER_YEAR;
req.ver_min = RTE_VER_MONTH;
req.ver_upd = RTE_VER_MINOR;
@@ -1512,12 +1502,10 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp)
HWRM_CHECK_RESULT;
- if (BNXT_VF(bp)) {
- struct bnxt_vf_info *vf = &bp->vf;
-
- /* Hard Coded.. 0xfff VLAN ID mask */
- vf->vlan = rte_le_to_cpu_16(resp->vlan) & 0xfff;
- }
+ /* Hard Coded.. 0xfff VLAN ID mask */
+ bp->vlan = rte_le_to_cpu_16(resp->vlan) & 0xfff;
+ if (BNXT_PF(bp))
+ bp->pf.active_vfs = rte_le_to_cpu_16(resp->alloc_vfs);
switch (resp->port_partition_type) {
case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0:
@@ -1532,3 +1520,277 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp)
return rc;
}
+
+static void copy_func_cfg_to_qcaps(struct hwrm_func_cfg_input *fcfg,
+ struct hwrm_func_qcaps_output *qcaps)
+{
+ qcaps->max_rsscos_ctx = fcfg->num_rsscos_ctxs;
+ memcpy(qcaps->mac_address, fcfg->dflt_mac_addr,
+ sizeof(qcaps->mac_address));
+ qcaps->max_l2_ctxs = fcfg->num_l2_ctxs;
+ qcaps->max_rx_rings = fcfg->num_rx_rings;
+ qcaps->max_tx_rings = fcfg->num_tx_rings;
+ qcaps->max_cmpl_rings = fcfg->num_cmpl_rings;
+ qcaps->max_stat_ctx = fcfg->num_stat_ctxs;
+ qcaps->max_vfs = 0;
+ qcaps->first_vf_id = 0;
+ qcaps->max_vnics = fcfg->num_vnics;
+ qcaps->max_decap_records = 0;
+ qcaps->max_encap_records = 0;
+ qcaps->max_tx_wm_flows = 0;
+ qcaps->max_tx_em_flows = 0;
+ qcaps->max_rx_wm_flows = 0;
+ qcaps->max_rx_em_flows = 0;
+ qcaps->max_flow_id = 0;
+ qcaps->max_mcast_filters = fcfg->num_mcast_filters;
+ qcaps->max_sp_tx_rings = 0;
+ qcaps->max_hw_ring_grps = fcfg->num_hw_ring_grps;
+}
+
+static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp, int tx_rings, bool std_mode)
+{
+ struct hwrm_func_cfg_input req = {0};
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ req.enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_MTU |
+ HWRM_FUNC_CFG_INPUT_ENABLES_MRU |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS);
+ if (std_mode)
+ req.flags = rte_cpu_to_le_32(
+ HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE);
+ req.mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu +
+ ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE);
+ req.mru = rte_cpu_to_le_16(bp->eth_dev->data->mtu +
+ ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE);
+ req.num_rsscos_ctxs = rte_cpu_to_le_16(bp->max_rsscos_ctx);
+ req.num_stat_ctxs = rte_cpu_to_le_16(bp->max_stat_ctx);
+ req.num_cmpl_rings = rte_cpu_to_le_16(bp->max_cp_rings);
+ req.num_tx_rings = rte_cpu_to_le_16(tx_rings);
+ req.num_rx_rings = rte_cpu_to_le_16(bp->max_rx_rings);
+ req.num_l2_ctxs = rte_cpu_to_le_16(bp->max_l2_ctx);
+ req.num_vnics = rte_cpu_to_le_16(bp->max_vnics);
+ req.num_hw_ring_grps = rte_cpu_to_le_16(bp->max_ring_grps);
+ req.fid = rte_cpu_to_le_16(0xffff);
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
+static void populate_vf_func_cfg_req(struct bnxt *bp,
+ struct hwrm_func_cfg_input *req,
+ int num_vfs)
+{
+ req->enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_MTU |
+ HWRM_FUNC_CFG_INPUT_ENABLES_MRU |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS |
+ HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS);
+
+ req->mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu +
+ ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE);
+ req->mru = rte_cpu_to_le_16(bp->eth_dev->data->mtu +
+ ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE);
+ req->num_rsscos_ctxs =
+ rte_cpu_to_le_16(bp->max_rsscos_ctx / (num_vfs + 1));
+ req->num_stat_ctxs = rte_cpu_to_le_16(bp->max_stat_ctx / (num_vfs + 1));
+ req->num_cmpl_rings =
+ rte_cpu_to_le_16(bp->max_cp_rings / (num_vfs + 1));
+ req->num_tx_rings = rte_cpu_to_le_16(bp->max_tx_rings / (num_vfs + 1));
+ req->num_rx_rings = rte_cpu_to_le_16(bp->max_rx_rings / (num_vfs + 1));
+ req->num_l2_ctxs = rte_cpu_to_le_16(bp->max_l2_ctx / (num_vfs + 1));
+ req->num_vnics = rte_cpu_to_le_16(bp->max_vnics / (num_vfs + 1));
+ req->num_hw_ring_grps =
+ rte_cpu_to_le_16(bp->max_ring_grps / (num_vfs + 1));
+}
+
+static void add_random_mac_if_needed(struct bnxt *bp,
+ struct hwrm_func_cfg_input *cfg_req,
+ int vf)
+{
+ struct hwrm_func_qcfg_input req = {0};
+ struct hwrm_func_qcfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ /* Check for zero MAC address */
+ HWRM_PREP(req, FUNC_QCFG, -1, resp);
+ req.fid = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ if (rc) {
+ RTE_LOG(ERR, PMD, "hwrm_func_qcfg failed rc:%d\n", rc);
+ } else if (resp->error_code) {
+ rc = rte_le_to_cpu_16(resp->error_code);
+ RTE_LOG(ERR, PMD, "hwrm_func_qcfg error %d\n", rc);
+ } else {
+ if (memcmp(resp->mac_address,
+ "\x00\x00\x00\x00\x00", 6) == 0) {
+ cfg_req->enables |= rte_cpu_to_le_32(
+ HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR);
+ eth_random_addr(cfg_req->dflt_mac_addr);
+ } else {
+ memcpy(cfg_req->dflt_mac_addr,
+ resp->mac_address, sizeof(resp->mac_address));
+ }
+ }
+}
+
+static void reserve_resources_from_vf(struct bnxt *bp,
+ struct hwrm_func_cfg_input *cfg_req,
+ int vf)
+{
+ struct hwrm_func_qcaps_input req = {0};
+ struct hwrm_func_qcaps_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ /* Get the actual allocated values now */
+ HWRM_PREP(req, FUNC_QCAPS, -1, resp);
+ req.fid = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ if (rc) {
+ RTE_LOG(ERR, PMD, "hwrm_func_qcaps failed rc:%d\n", rc);
+ copy_func_cfg_to_qcaps(cfg_req, resp);
+ } else if (resp->error_code) {
+ rc = rte_le_to_cpu_16(resp->error_code);
+ RTE_LOG(ERR, PMD, "hwrm_func_qcaps error %d\n", rc);
+ copy_func_cfg_to_qcaps(cfg_req, resp);
+ }
+
+ bp->max_rsscos_ctx -= rte_le_to_cpu_16(resp->max_rsscos_ctx);
+ bp->max_stat_ctx -= rte_le_to_cpu_16(resp->max_stat_ctx);
+ bp->max_cp_rings -= rte_le_to_cpu_16(resp->max_cmpl_rings);
+ bp->max_tx_rings -= rte_le_to_cpu_16(resp->max_tx_rings);
+ bp->max_rx_rings -= rte_le_to_cpu_16(resp->max_rx_rings);
+ bp->max_l2_ctx -= rte_le_to_cpu_16(resp->max_l2_ctxs);
+ bp->max_vnics -= rte_le_to_cpu_16(resp->max_vnics);
+ bp->max_ring_grps -= rte_le_to_cpu_16(resp->max_hw_ring_grps);
+}
+
+static int update_pf_resource_max(struct bnxt *bp)
+{
+ struct hwrm_func_qcfg_input req = {0};
+ struct hwrm_func_qcfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ /* And copy the allocated numbers into the pf struct */
+ HWRM_PREP(req, FUNC_QCFG, -1, resp);
+ req.fid = rte_cpu_to_le_16(0xffff);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ bp->max_tx_rings = rte_le_to_cpu_16(resp->alloc_tx_rings);
+ bp->pf.active_vfs = rte_le_to_cpu_16(resp->alloc_vfs);
+ /* TODO: Only TX ring value reflects actual allocation */
+ //bp->max_rx_rings = rte_le_to_cpu_16(resp->alloc_rx_rings);
+ //bp->max_cp_rings = rte_le_to_cpu_16(resp->alloc_cmpl_rings);
+ //bp->max_rsscos_ctx = rte_le_to_cpu_16(resp->alloc_rsscos_ctx);
+ //bp->max_vnics = rte_le_to_cpu_16(resp->alloc_vnics);
+ //bp->max_l2_ctx = rte_le_to_cpu_16(resp->alloc_l2_ctx);
+ //bp->max_ring_grps = rte_le_to_cpu_32(resp->alloc_hw_ring_grps);
+
+ return rc;
+}
+
+int bnxt_hwrm_allocate_pf_only(struct bnxt *bp)
+{
+ int rc;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD, "Attempt to allcoate VFs on a VF!\n");
+ return -1;
+ }
+
+ rc = bnxt_hwrm_func_qcaps(bp);
+ if (rc)
+ return rc;
+
+ rc = bnxt_hwrm_pf_func_cfg(bp, bp->max_tx_rings, false);
+ return rc;
+}
+
+int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
+{
+ struct hwrm_func_cfg_input req = {0};
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int i;
+ int rc = 0;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD, "Attempt to allcoate VFs on a VF!\n");
+ return -1;
+ }
+
+ rc = bnxt_hwrm_func_qcaps(bp);
+ if (rc)
+ return rc;
+
+ bp->pf.active_vfs = 0;
+
+ /*
+ * First, configure the PF to only use one TX ring. This ensures that
+ * there are enough rings for all VFs.
+ *
+ * If we don't do this, when we call func_alloc() later, we will lock
+ * extra rings to the PF that won't be available during func_cfg() of
+ * the VFs.
+ *
+ * This has been fixed with firmware versions above 20.6.54
+ */
+ rc = bnxt_hwrm_pf_func_cfg(bp, 1, true);
+ if (rc)
+ return rc;
+
+ populate_vf_func_cfg_req(bp, &req, num_vfs);
+
+ for (i = 0; i < num_vfs; i++) {
+ add_random_mac_if_needed(bp, &req, i);
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+ req.fid = rte_cpu_to_le_16(bp->pf.first_vf_id + i);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ /* Clear enable flag for next pass */
+ req.enables &= ~rte_cpu_to_le_32(
+ HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR);
+
+ if (rc || resp->error_code) {
+ RTE_LOG(ERR, PMD,
+ "Failed to initizlie VF %d.\n", i);
+ RTE_LOG(ERR, PMD,
+ "Not all VFs available.\n");
+ break;
+ }
+
+ reserve_resources_from_vf(bp, &req, i);
+ }
+
+ /*
+ * Now configure the PF to use "the rest" of the resources
+ * We're using STD_TX_RING_MODE here though which will limit the TX
+ * rings. This will allow QoS to function properly. Not setting this
+ * will cause PF rings to break bandwidth settings.
+ */
+ rc = bnxt_hwrm_pf_func_cfg(bp, bp->max_tx_rings, true);
+ if (rc)
+ return rc;
+
+ rc = update_pf_resource_max(bp);
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 6519ef2..1639e84 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -101,5 +101,7 @@ int bnxt_alloc_hwrm_resources(struct bnxt *bp);
int bnxt_get_hwrm_link_config(struct bnxt *bp, struct rte_eth_link *link);
int bnxt_set_hwrm_link_config(struct bnxt *bp, bool link_up);
int bnxt_hwrm_func_qcfg(struct bnxt *bp);
+int bnxt_hwrm_allocate_pf_only(struct bnxt *bp);
+int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
#endif
diff --git a/drivers/net/bnxt/bnxt_vnic.c b/drivers/net/bnxt/bnxt_vnic.c
index 33fdde2..139e4bf 100644
--- a/drivers/net/bnxt/bnxt_vnic.c
+++ b/drivers/net/bnxt/bnxt_vnic.c
@@ -69,15 +69,7 @@ void bnxt_init_vnics(struct bnxt *bp)
uint16_t max_vnics;
int i, j;
- if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- max_vnics = pf->max_vnics;
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- max_vnics = vf->max_vnics;
- }
+ max_vnics = bp->max_vnics;
STAILQ_INIT(&bp->free_vnic_list);
for (i = 0; i < max_vnics; i++) {
vnic = &bp->vnic_info[i];
@@ -181,15 +173,7 @@ int bnxt_alloc_vnic_attributes(struct bnxt *bp)
uint16_t max_vnics;
int i;
- if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- max_vnics = pf->max_vnics;
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- max_vnics = vf->max_vnics;
- }
+ max_vnics = bp->max_vnics;
snprintf(mz_name, RTE_MEMZONE_NAMESIZE,
"bnxt_%04x:%02x:%02x:%02x_vnicattr", pdev->addr.domain,
pdev->addr.bus, pdev->addr.devid, pdev->addr.function);
@@ -232,15 +216,7 @@ void bnxt_free_vnic_mem(struct bnxt *bp)
if (bp->vnic_info == NULL)
return;
- if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- max_vnics = pf->max_vnics;
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- max_vnics = vf->max_vnics;
- }
+ max_vnics = bp->max_vnics;
for (i = 0; i < max_vnics; i++) {
vnic = &bp->vnic_info[i];
if (vnic->fw_vnic_id != (uint16_t)HWRM_NA_SIGNATURE) {
@@ -258,15 +234,7 @@ int bnxt_alloc_vnic_mem(struct bnxt *bp)
struct bnxt_vnic_info *vnic_mem;
uint16_t max_vnics;
- if (BNXT_PF(bp)) {
- struct bnxt_pf_info *pf = &bp->pf;
-
- max_vnics = pf->max_vnics;
- } else {
- struct bnxt_vf_info *vf = &bp->vf;
-
- max_vnics = vf->max_vnics;
- }
+ max_vnics = bp->max_vnics;
/* Allocate memory for VNIC pool and filter pool */
vnic_mem = rte_zmalloc("bnxt_vnic_info",
max_vnics * sizeof(struct bnxt_vnic_info), 0);
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 03/28] bnxt: add additonal HWRM debug info to error messages
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 01/28] bnxt: add hwrm_func_cfg_input/output structures Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 02/28] bnxt: add code to support PF, VF configuration Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 04/28] bnxt: add new HWRM commands Ajit Khaparde
` (25 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
Add the cmd_err and opaque_0 and opaque_1 fields to HWRM error
messages. These allow better debugging of some classes of HWRM
errors.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_hwrm.c | 17 +++++++++++++++-
drivers/net/bnxt/hsi_struct_def_dpdk.h | 36 ++++++++++++++++++++++++++++++++++
2 files changed, 52 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 2a24610..cb974d5 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -140,7 +140,22 @@ static int bnxt_hwrm_send_message(struct bnxt *bp, void *msg, uint32_t msg_len)
} \
if (resp->error_code) { \
rc = rte_le_to_cpu_16(resp->error_code); \
- RTE_LOG(ERR, PMD, "%s error %d\n", __func__, rc); \
+ if (resp->resp_len >= 16) { \
+ struct hwrm_err_output *tmp_hwrm_err_op = \
+ (void *)resp; \
+ RTE_LOG(ERR, PMD, \
+ "%s error %d:%d:%08x:%04x\n", \
+ __func__, \
+ rc, tmp_hwrm_err_op->cmd_err, \
+ rte_le_to_cpu_32(\
+ tmp_hwrm_err_op->opaque_0), \
+ rte_le_to_cpu_16(\
+ tmp_hwrm_err_op->opaque_1)); \
+ } \
+ else { \
+ RTE_LOG(ERR, PMD, \
+ "%s error %d\n", __func__, rc); \
+ } \
return rc; \
} \
}
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 0635dd2..9cb3f76 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -1319,6 +1319,42 @@ struct output {
*/
} __attribute__((packed));
+/* Output (16 bytes) */
+struct hwrm_err_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t opaque_0;
+ /* debug info for this error response. */
+ uint16_t opaque_1;
+ /* debug info for this error response. */
+ uint8_t cmd_err;
+ /*
+ * In the case of an error response, command specific error code is
+ * returned in this field.
+ */
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_ver_get */
/*
* Description: This function is called by a driver to determine the HWRM
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 04/28] bnxt: add new HWRM commands
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (2 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 03/28] bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 05/28] bnxt: add support for PF/VF communications Ajit Khaparde
` (24 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
Add support for the following HWRM commands:
- hwrm_func_buf_rgtr:
This command is used by the PF driver to register buffers used
in the PF-VF communication with the HWRM. The PF driver uses this
command to register buffers for each PF-VF channel. A parent PF may
issue this command per child VF.
- hwrm_func_buf_unrgtr:
This command is used by the PF driver to unregister buffers used in
the PF-VF communication with the HWRM/firmware. The PF driver uses this
command to unregister buffers for PF-VF communication. A parent PF may
issue this command to unregister buffers for communication between the
PF and a specific VF.
- hwrm_reject_fwd_resp:
This command instructs the HWRM to reject a forwarded request and forward
the error response of the encapsulated request to the location specified
in the original request that is encapsulated.
- hwrm_exec_fwd_resp:
This command instructs the firmware to execute the forwarded request and
forward the response of the encapsulated request to the location
specified in the original request that is encapsulated.
These commands will be used in subsequent patches.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/hsi_struct_def_dpdk.h | 298 ++++++++++++++++++++++++++++++++-
1 file changed, 290 insertions(+), 8 deletions(-)
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 9cb3f76..c52f309 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -74,23 +74,25 @@ struct ctx_hw_stats64 {
* Following is the signature for HWRM message field that indicates not
* applicable (All F's). Need to cast it the size of the field if needed.
*/
-#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
-#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
-#define HWRM_MAX_RESP_LEN (176) /* hwrm_func_qstats */
-#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
-#define HW_HASH_KEY_SIZE 40
-#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
+#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
+#define HWRM_MAX_REQ_LEN 128 /* hwrm_func_buf_rgtr */
+#define HWRM_MAX_RESP_LEN 176 /* hwrm_func_qstats */
+#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
+#define HW_HASH_KEY_SIZE 40
+#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
/*
* Request types
*/
#define HWRM_VER_GET (UINT32_C(0x0))
+#define HWRM_FUNC_BUF_UNRGTR (UINT32_C(0xe))
#define HWRM_FUNC_RESET (UINT32_C(0x11))
#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
#define HWRM_FUNC_QCFG (UINT32_C(0x16))
#define HWRM_FUNC_CFG (UINT32_C(0x17))
#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
+#define HWRM_FUNC_BUF_RGTR (UINT32_C(0x1f))
#define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
#define HWRM_PORT_PHY_QCFG (UINT32_C(0x27))
#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
@@ -112,10 +114,11 @@ struct ctx_hw_stats64 {
#define HWRM_STAT_CTX_FREE (UINT32_C(0xb1))
#define HWRM_STAT_CTX_CLR_STATS (UINT32_C(0xb3))
#define HWRM_EXEC_FWD_RESP (UINT32_C(0xd0))
+#define HWRM_REJECT_FWD_RESP (UINT32_C(0xd1))
/* Return Codes */
-#define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
-#define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
+#define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
+#define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
/* Short TX BD (16 bytes) */
struct tx_bd_short {
@@ -1649,6 +1652,84 @@ struct hwrm_ver_get_output {
*/
} __attribute__((packed));
+/* hwrm_func_buf_unrgtr */
+/*
+ * Description: This command is used by the PF driver to unregister buffers used
+ * in the PF-VF communication with the HWRM. The PF driver uses this command to
+ * unregister buffers for PF-VF communication. A parent PF may issue this
+ * command to unregister buffers for communication between the PF and a specific
+ * VF. If the VF ID is not valid, then this command is used to unregister
+ * buffers used for communications with all children VFs of the PF.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_buf_unrgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id field to be configured. */
+ #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID (UINT32_C(0x1))
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_buf_unrgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_reset */
/*
* Description: This command resets a hardware function (PCIe function) and
@@ -2879,6 +2960,119 @@ struct hwrm_func_drv_rgtr_output {
*/
} __attribute__((packed));
+/* hwrm_func_buf_rgtr */
+/*
+ * Description: This command is used by the PF driver to register buffers used
+ * in the PF-VF communication with the HWRM. The PF driver uses this command to
+ * register buffers for each PF-VF channel. A parent PF may issue this command
+ * per child VF. If VF ID is not valid, then this command is used to register
+ * buffers for all children VFs of the PF.
+ */
+/* Input (128 bytes) */
+struct hwrm_func_buf_rgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id field to be configured. */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID (UINT32_C(0x1))
+ /* This bit must be '1' for the err_buf_addr field to be configured. */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR (UINT32_C(0x2))
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint16_t req_buf_num_pages;
+ /*
+ * This field represents the number of pages used for request buffer(s).
+ */
+ uint16_t req_buf_page_size;
+ /* This field represents the page size used for request buffer(s). */
+ /* 16 bytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_16B (UINT32_C(0x4))
+ /* 4 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4K (UINT32_C(0xc))
+ /* 8 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_8K (UINT32_C(0xd))
+ /* 64 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_64K (UINT32_C(0x10))
+ /* 2 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_2M (UINT32_C(0x15))
+ /* 4 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4M (UINT32_C(0x16))
+ /* 1 Gbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G (UINT32_C(0x1e))
+ uint16_t req_buf_len;
+ /* The length of the request buffer per VF in bytes. */
+ uint16_t resp_buf_len;
+ /* The length of the response buffer in bytes. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ /* This field represents the page addresses. */
+ uint64_t req_buf_page_addr[10];
+ uint64_t error_buf_addr;
+ /*
+ * This field is used to receive the error reporting from the chipset.
+ * Only applicable for PFs.
+ */
+ uint64_t resp_buf_addr;
+ /* This field is used to receive the response forwarded by the HWRM. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_buf_rgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_drv_unrgtr */
/*
* Description: This command is used by the function driver to un register with
@@ -6503,4 +6697,92 @@ struct hwrm_exec_fwd_resp_output {
*/
} __attribute__((packed));
+
+/* hwrm_reject_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated request to the
+ * HWRM. This command instructs the HWRM to reject the request and forward the
+ * error response of the encapsulated request to the location specified in the
+ * original request that is encapsulated. The target id of this command shall be
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * acknowledge the receipt of the encapsulated request and forwarding of the
+ * response.
+ */
+/* Input (128 bytes) */
+struct hwrm_reject_fwd_resp_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t encap_request[26];
+ /*
+ * This is an encapsulated request. This request should be
+ * rejected by the HWRM and the error response should be
+ * provided in the response buffer inside the encapsulated
+ * request.
+ */
+ uint16_t encap_resp_target_id;
+ /*
+ * This value indicates the target id of the response to the
+ * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
+ * HWRM
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_reject_fwd_resp_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
#endif
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 05/28] bnxt: add support for PF/VF communications
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (3 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 04/28] bnxt: add new HWRM commands Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-05-11 17:00 ` Ferruh Yigit
2017-03-28 3:48 ` [dpdk-dev] [PATCH 06/28] bnxt: add new HWRM commands to query VNIC info Ajit Khaparde
` (23 subsequent siblings)
28 siblings, 1 reply; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
Set up interrupts and default completion ring during device init to
allow VF communications.
Request most VF HWRM commands be forwarded to the PF driver. In the
future, this should be configurable.
Fix reporting of active VFs.
Add a log message when a completion is ignored on the default completion
ring since this will indicate support that needs to be added.
Do not initialize the default completion ring in bnxt_alloc_hwrm_rings(),
but move it out to bnxt_dev_init().
Create a structure bnxt_child_vf_info for PF to cache VF specific info.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt.h | 9 +-
drivers/net/bnxt/bnxt_cpr.c | 88 ++++++++++-------
drivers/net/bnxt/bnxt_cpr.h | 1 +
drivers/net/bnxt/bnxt_ethdev.c | 80 +++++++++++----
drivers/net/bnxt/bnxt_hwrm.c | 218 +++++++++++++++++++++++++++++++++--------
drivers/net/bnxt/bnxt_hwrm.h | 10 +-
drivers/net/bnxt/bnxt_irq.c | 5 +-
drivers/net/bnxt/bnxt_ring.c | 15 ---
8 files changed, 308 insertions(+), 118 deletions(-)
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 7fa0d8a..f2887d1 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -54,6 +54,12 @@ enum bnxt_hw_context {
HW_CONTEXT_IS_LB = 3,
};
+struct bnxt_child_vf_info {
+ uint16_t fid;
+ uint32_t func_cfg_flags;
+ void *req_buf;
+};
+
struct bnxt_pf_info {
#define BNXT_FIRST_PF_FID 1
#define BNXT_MAX_VFS(bp) (bp->pf.max_vfs)
@@ -65,9 +71,10 @@ struct bnxt_pf_info {
uint16_t first_vf_id;
uint16_t active_vfs;
uint16_t max_vfs;
+ uint32_t func_cfg_flags;
void *vf_req_buf;
- phys_addr_t vf_req_buf_dma_addr;
uint32_t vf_req_fwd[8];
+ struct bnxt_child_vf_info *vf_info;
};
/* Max wait time is 10 * 100ms = 1s */
diff --git a/drivers/net/bnxt/bnxt_cpr.c b/drivers/net/bnxt/bnxt_cpr.c
index 3aedcb8..5d961f6 100644
--- a/drivers/net/bnxt/bnxt_cpr.c
+++ b/drivers/net/bnxt/bnxt_cpr.c
@@ -65,56 +65,76 @@ void bnxt_handle_async_event(struct bnxt *bp,
void bnxt_handle_fwd_req(struct bnxt *bp, struct cmpl_base *cmpl)
{
+ struct hwrm_exec_fwd_resp_input *fwreq;
struct hwrm_fwd_req_cmpl *fwd_cmpl = (struct hwrm_fwd_req_cmpl *)cmpl;
struct input *fwd_cmd;
- uint16_t logical_vf_id, error_code;
+ uint16_t vf_id;
+ uint16_t req_len;
- /* Qualify the fwd request */
- if (fwd_cmpl->source_id < bp->pf.first_vf_id) {
- RTE_LOG(ERR, PMD,
- "FWD req's source_id 0x%x > first_vf_id 0x%x\n",
- fwd_cmpl->source_id, bp->pf.first_vf_id);
- error_code = HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED;
- goto reject;
- } else if (fwd_cmpl->req_len_type >> HWRM_FWD_REQ_CMPL_REQ_LEN_SFT >
- 128 - sizeof(struct input)) {
- RTE_LOG(ERR, PMD,
- "FWD req's cmd len 0x%x > 108 bytes allowed\n",
- fwd_cmpl->req_len_type >> HWRM_FWD_REQ_CMPL_REQ_LEN_SFT);
- error_code = HWRM_ERR_CODE_INVALID_PARAMS;
- goto reject;
+ if (bp->pf.active_vfs <= 0) {
+ RTE_LOG(ERR, PMD, "Forwarded VF with no active VFs\n");
+ return;
}
+ /* Qualify the fwd request */
+ vf_id = rte_le_to_cpu_16(fwd_cmpl->source_id);
+
+ /*
+ * TODO: req_len is always 128, is there a way to get the
+ * actual request length?
+ */
+ req_len = (rte_le_to_cpu_16(fwd_cmpl->req_len_type) &
+ HWRM_FWD_REQ_CMPL_REQ_LEN_MASK) >> HWRM_FWD_REQ_CMPL_REQ_LEN_SFT;
+ if (req_len > sizeof(fwreq->encap_request))
+ req_len = sizeof(fwreq->encap_request);
+
/* Locate VF's forwarded command */
- logical_vf_id = fwd_cmpl->source_id - bp->pf.first_vf_id;
- fwd_cmd = (struct input *)((uint8_t *)bp->pf.vf_req_buf +
- (logical_vf_id * 128));
-
- /* Provision the request */
- switch (fwd_cmd->req_type) {
- case HWRM_CFA_L2_FILTER_ALLOC:
- case HWRM_CFA_L2_FILTER_FREE:
- case HWRM_CFA_L2_FILTER_CFG:
- case HWRM_CFA_L2_SET_RX_MASK:
- break;
- default:
- error_code = HWRM_ERR_CODE_INVALID_PARAMS;
+ fwd_cmd = (struct input *)
+ bp->pf.vf_info[vf_id - bp->pf.first_vf_id].req_buf;
+ /* Force the target ID to the source VF */
+ fwd_cmd->target_id = rte_cpu_to_le_16(vf_id);
+
+ if (vf_id < bp->pf.first_vf_id ||
+ vf_id >= (bp->pf.first_vf_id) + bp->pf.active_vfs) {
+ RTE_LOG(ERR, PMD,
+ "FWD req src_id 0x%x out of range 0x%x - 0x%x(%d %d)\n",
+ vf_id, bp->pf.first_vf_id,
+ (bp->pf.first_vf_id) + bp->pf.active_vfs - 1,
+ bp->pf.first_vf_id, bp->pf.active_vfs);
goto reject;
}
+ /* TODO: Call "mailbox" callback if necessary */
+
/* Forward */
- fwd_cmd->target_id = fwd_cmpl->source_id;
- bnxt_hwrm_exec_fwd_resp(bp, fwd_cmd);
+ bnxt_hwrm_exec_fwd_resp(bp, vf_id, fwd_cmd, req_len);
return;
reject:
- /* TODO: Encap the reject error resp into the hwrm_err_iput? */
- /* Use the error_code for the reject cmd */
- RTE_LOG(ERR, PMD,
- "Error 0x%x found in the forward request\n", error_code);
+ bnxt_hwrm_reject_fwd_resp(bp, vf_id, fwd_cmd, req_len);
+ return;
}
/* For the default completion ring only */
+int bnxt_alloc_def_cp_ring(struct bnxt *bp)
+{
+ struct bnxt_cp_ring_info *cpr = bp->def_cp_ring;
+ struct bnxt_ring *cp_ring = cpr->cp_ring_struct;
+ int rc;
+
+ rc = bnxt_hwrm_ring_alloc(bp, cp_ring,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
+ 0, HWRM_NA_SIGNATURE);
+ if (rc)
+ goto err_out;
+ cpr->cp_doorbell = bp->pdev->mem_resource[2].addr;
+ B_CP_DIS_DB(cpr, cpr->cp_raw_cons);
+ bp->grp_info[0].cp_fw_ring_id = cp_ring->fw_ring_id;
+
+err_out:
+ return rc;
+}
+
void bnxt_free_def_cp_ring(struct bnxt *bp)
{
struct bnxt_cp_ring_info *cpr = bp->def_cp_ring;
diff --git a/drivers/net/bnxt/bnxt_cpr.h b/drivers/net/bnxt/bnxt_cpr.h
index 83e5376..8e147a5 100644
--- a/drivers/net/bnxt/bnxt_cpr.h
+++ b/drivers/net/bnxt/bnxt_cpr.h
@@ -82,6 +82,7 @@ struct bnxt_cp_ring_info {
struct bnxt;
+int bnxt_alloc_def_cp_ring(struct bnxt *bp);
void bnxt_free_def_cp_ring(struct bnxt *bp);
int bnxt_init_def_ring_struct(struct bnxt *bp, unsigned int socket_id);
void bnxt_handle_async_event(struct bnxt *bp, struct cmpl_base *cmp);
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 667ba12..b7732e0 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -478,34 +478,17 @@ static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
bp->dev_stopped = 0;
- rc = bnxt_setup_int(bp);
- if (rc)
- goto error;
-
- rc = bnxt_alloc_mem(bp);
- if (rc)
- goto error;
-
- rc = bnxt_request_int(bp);
- if (rc)
- goto error;
-
rc = bnxt_init_nic(bp);
if (rc)
goto error;
- bnxt_enable_int(bp);
-
bnxt_link_update_op(eth_dev, 0);
return 0;
error:
bnxt_shutdown_nic(bp);
- bnxt_disable_int(bp);
- bnxt_free_int(bp);
bnxt_free_tx_mbufs(bp);
bnxt_free_rx_mbufs(bp);
- bnxt_free_mem(bp);
return rc;
}
@@ -537,8 +520,6 @@ static void bnxt_dev_stop_op(struct rte_eth_dev *eth_dev)
eth_dev->data->dev_link.link_status = 0;
}
bnxt_set_hwrm_link_config(bp, false);
- bnxt_disable_int(bp);
- bnxt_free_int(bp);
bnxt_shutdown_nic(bp);
bp->dev_stopped = 1;
}
@@ -1063,6 +1044,12 @@ static int bnxt_init_board(struct rte_eth_dev *eth_dev)
return rc;
}
+#define ALLOW_FUNC(x) \
+ { \
+ typeof(x) arg = (x); \
+ bp->pf.vf_req_fwd[((arg) >> 5)] &= \
+ ~rte_cpu_to_le_32(1 << ((arg) & 0x1f)); \
+ }
static int
bnxt_dev_init(struct rte_eth_dev *eth_dev)
{
@@ -1140,8 +1127,30 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
goto error_free;
}
- rc = bnxt_hwrm_func_driver_register(bp, 0,
- bp->pf.vf_req_fwd);
+ /* Forward all requests */
+ memset(bp->pf.vf_req_fwd, 0xff, sizeof(bp->pf.vf_req_fwd));
+ /*
+ * We can't forward commands before the VF driver calls drv_rgtr.
+ * These are the ones that are may be used by drivers.
+ */
+ ALLOW_FUNC(HWRM_VER_GET);
+ ALLOW_FUNC(HWRM_QUEUE_QPORTCFG);
+ ALLOW_FUNC(HWRM_FUNC_QCFG);
+ ALLOW_FUNC(HWRM_FUNC_QCAPS);
+ ALLOW_FUNC(HWRM_FUNC_DRV_RGTR);
+
+ /*
+ * The following are used for driver cleanup. If we disallow these,
+ * VF drivers can't clean up cleanly.
+ */
+ ALLOW_FUNC(HWRM_FUNC_DRV_UNRGTR);
+ ALLOW_FUNC(HWRM_VNIC_FREE);
+ ALLOW_FUNC(HWRM_RING_FREE);
+ ALLOW_FUNC(HWRM_RING_GRP_FREE);
+ ALLOW_FUNC(HWRM_VNIC_RSS_COS_LB_CTX_FREE);
+ ALLOW_FUNC(HWRM_CFA_L2_FILTER_FREE);
+ ALLOW_FUNC(HWRM_STAT_CTX_FREE);
+ rc = bnxt_hwrm_func_driver_register(bp);
if (rc) {
RTE_LOG(ERR, PMD,
"Failed to register driver");
@@ -1183,8 +1192,32 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
}
}
+ rc = bnxt_setup_int(bp);
+ if (rc)
+ goto error_free;
+
+ rc = bnxt_alloc_mem(bp);
+ if (rc)
+ goto error_free_int;
+
+ rc = bnxt_request_int(bp);
+ if (rc)
+ goto error_free_int;
+
+ rc = bnxt_alloc_def_cp_ring(bp);
+ if (rc)
+ goto error_free_int;
+
+ bnxt_enable_int(bp);
+
return 0;
+error_free_int:
+ bnxt_disable_int(bp);
+ bnxt_free_def_cp_ring(bp);
+ bnxt_hwrm_func_buf_unrgtr(bp);
+ bnxt_free_int(bp);
+ bnxt_free_mem(bp);
error_free:
eth_dev->driver->eth_dev_uninit(eth_dev);
error:
@@ -1196,6 +1229,9 @@ bnxt_dev_uninit(struct rte_eth_dev *eth_dev) {
struct bnxt *bp = eth_dev->data->dev_private;
int rc;
+ bnxt_disable_int(bp);
+ bnxt_free_int(bp);
+ bnxt_free_mem(bp);
if (eth_dev->data->mac_addrs != NULL) {
rte_free(eth_dev->data->mac_addrs);
eth_dev->data->mac_addrs = NULL;
@@ -1208,6 +1244,8 @@ bnxt_dev_uninit(struct rte_eth_dev *eth_dev) {
bnxt_free_hwrm_resources(bp);
if (bp->dev_stopped == 0)
bnxt_dev_close_op(eth_dev);
+ if (bp->pf.vf_info)
+ rte_free(bp->pf.vf_info);
eth_dev->dev_ops = NULL;
eth_dev->rx_pkt_burst = NULL;
eth_dev->tx_pkt_burst = NULL;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index cb974d5..02e483e 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -54,6 +54,31 @@
#define HWRM_CMD_TIMEOUT 2000
+static int page_getenum(size_t size)
+{
+ if (size <= 1 << 4)
+ return 4;
+ if (size <= 1 << 12)
+ return 12;
+ if (size <= 1 << 13)
+ return 13;
+ if (size <= 1 << 16)
+ return 16;
+ if (size <= 1 << 21)
+ return 21;
+ if (size <= 1 << 22)
+ return 22;
+ if (size <= 1 << 30)
+ return 30;
+ RTE_LOG(ERR, PMD, "Page size %zu out of range\n", size);
+ return sizeof(void *) * 8 - 1;
+}
+
+static int page_roundup(size_t size)
+{
+ return 1 << page_getenum(size);
+}
+
/*
* HWRM Functions (sent to HWRM)
* These are named bnxt_hwrm_*() and return -1 if bnxt_hwrm_send_message()
@@ -267,29 +292,13 @@ int bnxt_hwrm_set_filter(struct bnxt *bp,
return rc;
}
-int bnxt_hwrm_exec_fwd_resp(struct bnxt *bp, void *fwd_cmd)
-{
- int rc;
- struct hwrm_exec_fwd_resp_input req = {.req_type = 0 };
- struct hwrm_exec_fwd_resp_output *resp = bp->hwrm_cmd_resp_addr;
-
- HWRM_PREP(req, EXEC_FWD_RESP, -1, resp);
-
- memcpy(req.encap_request, fwd_cmd,
- sizeof(req.encap_request));
-
- rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
-
- HWRM_CHECK_RESULT;
-
- return rc;
-}
-
int bnxt_hwrm_func_qcaps(struct bnxt *bp)
{
int rc = 0;
struct hwrm_func_qcaps_input req = {.req_type = 0 };
struct hwrm_func_qcaps_output *resp = bp->hwrm_cmd_resp_addr;
+ uint16_t new_max_vfs;
+ int i;
HWRM_PREP(req, FUNC_QCAPS, -1, resp);
@@ -303,7 +312,16 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
if (BNXT_PF(bp)) {
bp->pf.port_id = resp->port_id;
bp->pf.first_vf_id = rte_le_to_cpu_16(resp->first_vf_id);
- bp->pf.max_vfs = rte_le_to_cpu_16(resp->max_vfs);
+ new_max_vfs = rte_le_to_cpu_16(resp->max_vfs);
+ if (new_max_vfs != bp->pf.max_vfs) {
+ if (bp->pf.vf_info)
+ rte_free(bp->pf.vf_info);
+ bp->pf.vf_info = rte_malloc("bnxt_vf_info",
+ sizeof(bp->pf.vf_info[0]) * new_max_vfs, 0);
+ bp->pf.max_vfs = new_max_vfs;
+ for (i = 0; i < new_max_vfs; i++)
+ bp->pf.vf_info[i].fid = bp->pf.first_vf_id + i;
+ }
}
bp->fw_fid = rte_le_to_cpu_32(resp->fid);
@@ -336,8 +354,7 @@ int bnxt_hwrm_func_reset(struct bnxt *bp)
return rc;
}
-int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
- uint32_t *vf_req_fwd)
+int bnxt_hwrm_func_driver_register(struct bnxt *bp)
{
int rc;
struct hwrm_func_drv_rgtr_input req = {.req_type = 0 };
@@ -347,15 +364,19 @@ int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
return 0;
HWRM_PREP(req, FUNC_DRV_RGTR, -1, resp);
- req.flags = flags;
- req.enables = HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER |
- HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD |
- HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD;
+ req.enables = rte_cpu_to_le_32(HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER |
+ HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD);
req.ver_maj = RTE_VER_YEAR;
req.ver_min = RTE_VER_MONTH;
req.ver_upd = RTE_VER_MINOR;
- memcpy(req.vf_req_fwd, vf_req_fwd, sizeof(req.vf_req_fwd));
+ if (BNXT_PF(bp)) {
+ req.enables |=
+ rte_cpu_to_le_32(HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD);
+ memcpy(req.vf_req_fwd, bp->pf.vf_req_fwd,
+ RTE_MIN(sizeof(req.vf_req_fwd),
+ sizeof(bp->pf.vf_req_fwd)));
+ }
req.async_event_fwd[0] |= rte_cpu_to_le_32(0x1); /* TODO: Use MACRO */
@@ -866,7 +887,8 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic)
req.mru = rte_cpu_to_le_16(bp->eth_dev->data->mtu + ETHER_HDR_LEN +
ETHER_CRC_LEN + VLAN_TAG_SIZE);
if (vnic->func_default)
- req.flags = 1;
+ req.flags |=
+ rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT);
if (vnic->vlan_strip)
req.flags |=
rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE);
@@ -961,6 +983,88 @@ int bnxt_hwrm_vnic_rss_cfg(struct bnxt *bp,
return rc;
}
+int bnxt_hwrm_func_buf_rgtr(struct bnxt *bp)
+{
+ int rc = 0;
+ struct hwrm_func_buf_rgtr_input req = {.req_type = 0 };
+ struct hwrm_func_buf_rgtr_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_BUF_RGTR, -1, resp);
+
+ req.req_buf_num_pages = rte_cpu_to_le_16(1);
+ req.req_buf_page_size =
+ rte_cpu_to_le_16(page_getenum(bp->pf.active_vfs *
+ HWRM_MAX_REQ_LEN));
+ req.req_buf_len = rte_cpu_to_le_16(HWRM_MAX_REQ_LEN);
+ req.req_buf_page_addr[0] =
+ rte_cpu_to_le_64(rte_malloc_virt2phy(bp->pf.vf_req_buf));
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
+int bnxt_hwrm_func_buf_unrgtr(struct bnxt *bp)
+{
+ int rc = 0;
+ struct hwrm_func_buf_unrgtr_input req = {.req_type = 0 };
+ struct hwrm_func_buf_unrgtr_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_BUF_UNRGTR, -1, resp);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
+int bnxt_hwrm_reject_fwd_resp(struct bnxt *bp, uint16_t target_id,
+ void *encaped, size_t ec_size)
+{
+ int rc = 0;
+ struct hwrm_reject_fwd_resp_input req = {.req_type = 0};
+ struct hwrm_reject_fwd_resp_output *resp = bp->hwrm_cmd_resp_addr;
+
+ if (ec_size > sizeof(req.encap_request))
+ return -1;
+
+ HWRM_PREP(req, REJECT_FWD_RESP, -1, resp);
+
+ req.encap_resp_target_id = rte_cpu_to_le_16(target_id);
+ memcpy(req.encap_request, encaped, ec_size);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
+int bnxt_hwrm_exec_fwd_resp(struct bnxt *bp, uint16_t target_id,
+ void *encaped, size_t ec_size)
+{
+ int rc = 0;
+ struct hwrm_exec_fwd_resp_input req = {.req_type = 0};
+ struct hwrm_exec_fwd_resp_output *resp = bp->hwrm_cmd_resp_addr;
+
+ if (ec_size > sizeof(req.encap_request))
+ return -1;
+
+ HWRM_PREP(req, EXEC_FWD_RESP, -1, resp);
+
+ req.encap_resp_target_id = rte_cpu_to_le_16(target_id);
+ memcpy(req.encap_request, encaped, ec_size);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
/*
* HWRM utility functions
*/
@@ -1222,7 +1326,8 @@ void bnxt_free_all_hwrm_resources(struct bnxt *bp)
return;
vnic = &bp->vnic_info[0];
- bnxt_hwrm_cfa_l2_clear_rx_mask(bp, vnic);
+ if (BNXT_PF(bp))
+ bnxt_hwrm_cfa_l2_clear_rx_mask(bp, vnic);
/* VNIC resources */
for (i = 0; i < bp->nr_vnics; i++) {
@@ -1519,8 +1624,6 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp)
/* Hard Coded.. 0xfff VLAN ID mask */
bp->vlan = rte_le_to_cpu_16(resp->vlan) & 0xfff;
- if (BNXT_PF(bp))
- bp->pf.active_vfs = rte_le_to_cpu_16(resp->alloc_vfs);
switch (resp->port_partition_type) {
case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0:
@@ -1562,7 +1665,7 @@ static void copy_func_cfg_to_qcaps(struct hwrm_func_cfg_input *fcfg,
qcaps->max_hw_ring_grps = fcfg->num_hw_ring_grps;
}
-static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp, int tx_rings, bool std_mode)
+static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp, int tx_rings)
{
struct hwrm_func_cfg_input req = {0};
struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
@@ -1578,8 +1681,7 @@ static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp, int tx_rings, bool std_mode)
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS);
- if (std_mode)
- req.flags = rte_cpu_to_le_32(
+ req.flags = rte_cpu_to_le_32(
HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE);
req.mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu +
ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE);
@@ -1645,7 +1747,7 @@ static void add_random_mac_if_needed(struct bnxt *bp,
/* Check for zero MAC address */
HWRM_PREP(req, FUNC_QCFG, -1, resp);
- req.fid = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
if (rc) {
RTE_LOG(ERR, PMD, "hwrm_func_qcfg failed rc:%d\n", rc);
@@ -1675,7 +1777,7 @@ static void reserve_resources_from_vf(struct bnxt *bp,
/* Get the actual allocated values now */
HWRM_PREP(req, FUNC_QCAPS, -1, resp);
- req.fid = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
if (rc) {
@@ -1710,8 +1812,8 @@ static int update_pf_resource_max(struct bnxt *bp)
HWRM_CHECK_RESULT;
bp->max_tx_rings = rte_le_to_cpu_16(resp->alloc_tx_rings);
- bp->pf.active_vfs = rte_le_to_cpu_16(resp->alloc_vfs);
/* TODO: Only TX ring value reflects actual allocation */
+ //bp->pf.active_vfs = rte_le_to_cpu_16(resp->alloc_vfs);
//bp->max_rx_rings = rte_le_to_cpu_16(resp->alloc_rx_rings);
//bp->max_cp_rings = rte_le_to_cpu_16(resp->alloc_cmpl_rings);
//bp->max_rsscos_ctx = rte_le_to_cpu_16(resp->alloc_rsscos_ctx);
@@ -1735,7 +1837,9 @@ int bnxt_hwrm_allocate_pf_only(struct bnxt *bp)
if (rc)
return rc;
- rc = bnxt_hwrm_pf_func_cfg(bp, bp->max_tx_rings, false);
+ bp->pf.func_cfg_flags &=
+ ~HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE;
+ rc = bnxt_hwrm_pf_func_cfg(bp, bp->max_tx_rings);
return rc;
}
@@ -1755,7 +1859,7 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
if (rc)
return rc;
- bp->pf.active_vfs = 0;
+ bp->pf.active_vfs = num_vfs;
/*
* First, configure the PF to only use one TX ring. This ensures that
@@ -1767,17 +1871,40 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
*
* This has been fixed with firmware versions above 20.6.54
*/
- rc = bnxt_hwrm_pf_func_cfg(bp, 1, true);
+ bp->pf.func_cfg_flags |=
+ HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE;
+ rc = bnxt_hwrm_pf_func_cfg(bp, 1);
if (rc)
return rc;
+ /*
+ * Now, create and register a buffer to hold forwarded VF requests
+ */
+ bp->pf.vf_req_buf = rte_malloc("bnxt_vf_fwd",
+ num_vfs * HWRM_MAX_REQ_LEN,
+ page_roundup(num_vfs *
+ HWRM_MAX_REQ_LEN));
+ if (bp->pf.vf_req_buf == NULL) {
+ rc = -ENOMEM;
+ goto error_free;
+ }
+ for (i = 0; i < num_vfs; i++)
+ bp->pf.vf_info[i].req_buf =
+ ((char *)bp->pf.vf_req_buf) + (i * HWRM_MAX_REQ_LEN);
+
+ rc = bnxt_hwrm_func_buf_rgtr(bp);
+ if (rc)
+ goto error_free;
+
populate_vf_func_cfg_req(bp, &req, num_vfs);
+ bp->pf.active_vfs = 0;
for (i = 0; i < num_vfs; i++) {
add_random_mac_if_needed(bp, &req, i);
HWRM_PREP(req, FUNC_CFG, -1, resp);
- req.fid = rte_cpu_to_le_16(bp->pf.first_vf_id + i);
+ req.flags = rte_cpu_to_le_32(bp->pf.vf_info[i].func_cfg_flags);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[i].fid);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
/* Clear enable flag for next pass */
@@ -1793,6 +1920,7 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
}
reserve_resources_from_vf(bp, &req, i);
+ bp->pf.active_vfs++;
}
/*
@@ -1801,11 +1929,17 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
* rings. This will allow QoS to function properly. Not setting this
* will cause PF rings to break bandwidth settings.
*/
- rc = bnxt_hwrm_pf_func_cfg(bp, bp->max_tx_rings, true);
+ rc = bnxt_hwrm_pf_func_cfg(bp, bp->max_tx_rings);
if (rc)
- return rc;
+ goto error_free;
rc = update_pf_resource_max(bp);
+ if (rc)
+ goto error_free;
+
+ return rc;
+error_free:
+ bnxt_hwrm_func_buf_unrgtr(bp);
return rc;
}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 1639e84..6ae2380 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -52,10 +52,14 @@ int bnxt_hwrm_set_filter(struct bnxt *bp,
struct bnxt_vnic_info *vnic,
struct bnxt_filter_info *filter);
-int bnxt_hwrm_exec_fwd_resp(struct bnxt *bp, void *fwd_cmd);
+int bnxt_hwrm_exec_fwd_resp(struct bnxt *bp, uint16_t target_id,
+ void *encaped, size_t ec_size);
+int bnxt_hwrm_reject_fwd_resp(struct bnxt *bp, uint16_t target_id,
+ void *encaped, size_t ec_size);
-int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
- uint32_t *vf_req_fwd);
+int bnxt_hwrm_func_buf_rgtr(struct bnxt *bp);
+int bnxt_hwrm_func_buf_unrgtr(struct bnxt *bp);
+int bnxt_hwrm_func_driver_register(struct bnxt *bp);
int bnxt_hwrm_func_qcaps(struct bnxt *bp);
int bnxt_hwrm_func_reset(struct bnxt *bp);
int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags);
diff --git a/drivers/net/bnxt/bnxt_irq.c b/drivers/net/bnxt/bnxt_irq.c
index e93585a..2842ba8 100644
--- a/drivers/net/bnxt/bnxt_irq.c
+++ b/drivers/net/bnxt/bnxt_irq.c
@@ -67,11 +67,12 @@ static void bnxt_int_handler(struct rte_intr_handle *handle __rte_unused,
/* Handle any async event */
bnxt_handle_async_event(bp, cmp);
break;
- case CMPL_BASE_TYPE_HWRM_FWD_RESP:
- /* Handle HWRM forwarded responses */
+ case CMPL_BASE_TYPE_HWRM_FWD_REQ:
bnxt_handle_fwd_req(bp, cmp);
break;
default:
+ RTE_LOG(INFO, PMD,
+ "Ignoring %02x completion\n", CMP_TYPE(cmp));
/* Ignore any other events */
break;
}
diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
index 0fafa13..389bef2 100644
--- a/drivers/net/bnxt/bnxt_ring.c
+++ b/drivers/net/bnxt/bnxt_ring.c
@@ -213,21 +213,6 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
unsigned int i;
int rc = 0;
- /* Default completion ring */
- {
- struct bnxt_cp_ring_info *cpr = bp->def_cp_ring;
- struct bnxt_ring *cp_ring = cpr->cp_ring_struct;
-
- rc = bnxt_hwrm_ring_alloc(bp, cp_ring,
- HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
- 0, HWRM_NA_SIGNATURE);
- if (rc)
- goto err_out;
- cpr->cp_doorbell = pci_dev->mem_resource[2].addr;
- B_CP_DIS_DB(cpr, cpr->cp_raw_cons);
- bp->grp_info[0].cp_fw_ring_id = cp_ring->fw_ring_id;
- }
-
for (i = 0; i < bp->rx_cp_nr_rings; i++) {
struct bnxt_rx_queue *rxq = bp->rx_queues[i];
struct bnxt_cp_ring_info *cpr = rxq->cp_ring;
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 06/28] bnxt: add new HWRM commands to query VNIC info
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (4 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 05/28] bnxt: add support for PF/VF communications Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 07/28] bnxt: add functions for tx_loopback and queues_drop_en Ajit Khaparde
` (22 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
This patch adds the following HWRM commands which will be used by
the subsequent patches.
- hwrm_func_vf_vnic_ids_query:
This command is used to query vf vnic ids.
- hwrm_vnic_qcfg:
Query the RX VNIC structure. This function can be used by a PF or a VF
driver to query its own VNIC resource or VNIC resource of its child VF.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/hsi_struct_def_dpdk.h | 217 ++++++++++++++++++++++++++++++++-
1 file changed, 216 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index c52f309..bce854e 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -91,6 +91,7 @@ struct ctx_hw_stats64 {
#define HWRM_FUNC_QCFG (UINT32_C(0x16))
#define HWRM_FUNC_CFG (UINT32_C(0x17))
#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
+#define HWRM_FUNC_VF_VNIC_IDS_QUERY (UINT32_C(0x1c))
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
#define HWRM_FUNC_BUF_RGTR (UINT32_C(0x1f))
#define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
@@ -99,6 +100,7 @@ struct ctx_hw_stats64 {
#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
#define HWRM_VNIC_FREE (UINT32_C(0x41))
#define HWRM_VNIC_CFG (UINT32_C(0x42))
+#define HWRM_VNIC_QCFG (UINT32_C(0x43))
#define HWRM_VNIC_RSS_CFG (UINT32_C(0x46))
#define HWRM_RING_ALLOC (UINT32_C(0x50))
#define HWRM_RING_FREE (UINT32_C(0x51))
@@ -1179,7 +1181,7 @@ struct hwrm_fwd_req_cmpl {
*/
uint32_t unused_0;
/* unused1 is 32 b */
- uint32_t req_buf_addr_v[2];
+ uint64_t req_buf_addr_v;
/* Address of forwarded request. */
/*
* This value is written by the NIC such that it will be
@@ -3148,6 +3150,82 @@ struct hwrm_func_drv_unrgtr_output {
*/
} __attribute__((packed));
+/* hwrm_func_vf_vnic_ids_query */
+/* Description: This command is used to query vf vnic ids. */
+/* Input (32 bytes) */
+struct hwrm_func_vf_vnic_ids_query_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The scope of
+ * VF ID is local within a PF.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t max_vnic_id_cnt;
+ /* Max number of vnic ids in vnic id table */
+ uint64_t vnic_id_tbl_addr;
+ /* This is the address for VF VNIC ID table */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_vf_vnic_ids_query_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t vnic_id_cnt;
+ /*
+ * Actual number of vnic ids Each VNIC ID is written as a 32-bit number.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_port_phy_cfg */
/*
* Description: This command configures the PHY device for the port. It allows
@@ -5023,6 +5101,143 @@ struct hwrm_vnic_cfg_output {
*/
} __attribute__((packed));
+/* hwrm_vnic_qcfg */
+/*
+ * Description: Query the RX VNIC structure. This function can be used by a PF
+ * driver to query its own VNIC resource or VNIC resource of its child VF. This
+ * function can also be used by a VF driver to query its own VNIC resource.
+ */
+/* Input (32 bytes) */
+struct hwrm_vnic_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id_valid field to be configured. */
+ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t vf_id;
+ /* ID of Virtual Function whose VNIC resource is being queried. */
+ uint16_t unused_0[3];
+};
+
+/* Output (32 bytes) */
+struct hwrm_vnic_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t dflt_ring_grp;
+ /* Default Completion ring for the VNIC. */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
+ * RSS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
+ * COS rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
+ * there is no LB rule.
+ */
+ uint16_t mru;
+ /* The maximum receive unit of the vnic. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is the default VNIC for the function.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to strip VLAN in the RX
+ * path. If set to '0', then VLAN stripping is disabled on this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to buffer receive
+ * packets in the hardware until the host posts new receive buffers. If
+ * set to '0', then bd_stall is disabled on this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is configured to receive both RoCE and
+ * non-RoCE traffic. If set to '0', then this VNIC is not configured to
+ * operate in dual VNIC mode.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is configured to receive only
+ * RoCE traffic. When this flag is set to '0', the VNIC is not
+ * configured to receive only RoCE traffic. If roce_dual_vnic_mode flag
+ * and this flag both are set to '1', then it is an invalid
+ * configuration of the VNIC. The HWRM should not allow that type of
+ * mis-configuration by HWRM clients.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain application
+ * (e.g. Receive Flow Steering) where exact match is used to direct
+ * packets to a VNIC with one destination ring group only, there is no
+ * need to configure RSS indirection table for that VNIC as only one
+ * destination ring group is used. When this bit is set to '1', then the
+ * VNIC is enabled in a mode where RSS is enabled in the VNIC using a
+ * RSS context for computing RSS hash but the RSS indirection table is
+ * not configured.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
+ uint32_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+};
+
/* hwrm_vnic_rss_cfg */
/* Description: This function is used to enable RSS configuration. */
/* Input (48 bytes) */
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 07/28] bnxt: add functions for tx_loopback and queues_drop_en
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (5 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 06/28] bnxt: add new HWRM commands to query VNIC info Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 08/28] bnxt: support setting VF mac address Ajit Khaparde
` (21 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Steeven Li
Add functions rte_pmd_bnxt_set_tx_loopback and
rte_pmd_bnxt_set_all_queues_drop_en to configure tx_loopback and
queue_drop setting in the hardware.
This patch also adds code to testpmd app to call the appropriate
function when the bnxt driver is in use.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
app/test-pmd/cmdline.c | 13 ++-
drivers/net/bnxt/Makefile | 2 +
drivers/net/bnxt/bnxt.h | 8 ++
drivers/net/bnxt/bnxt_cpr.c | 41 ++++++---
drivers/net/bnxt/bnxt_ethdev.c | 1 +
drivers/net/bnxt/bnxt_hwrm.c | 114 +++++++++++++++++++++++-
drivers/net/bnxt/bnxt_hwrm.h | 4 +
drivers/net/bnxt/bnxt_irq.c | 3 +-
drivers/net/bnxt/bnxt_vnic.h | 3 +
drivers/net/bnxt/rte_pmd_bnxt.c | 143 ++++++++++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.h | 98 ++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 7 +-
12 files changed, 417 insertions(+), 20 deletions(-)
create mode 100644 drivers/net/bnxt/rte_pmd_bnxt.c
create mode 100644 drivers/net/bnxt/rte_pmd_bnxt.h
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 47f935d..1465685 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -94,6 +94,9 @@
#ifdef RTE_LIBRTE_I40E_PMD
#include <rte_pmd_i40e.h>
#endif
+#ifdef RTE_LIBRTE_BNXT_PMD
+#include <rte_pmd_bnxt.h>
+#endif
#include "testpmd.h"
static struct cmdline *testpmd_cl;
@@ -11353,6 +11356,9 @@ cmd_set_tx_loopback_parsed(
if (ret == -ENOTSUP)
ret = rte_pmd_ixgbe_set_tx_loopback(res->port_id, is_on);
#endif
+#ifdef RTE_LIBRTE_BNXT_PMD
+ ret = rte_pmd_bnxt_set_tx_loopback(res->port_id, is_on);
+#endif
#ifdef RTE_LIBRTE_I40E_PMD
if (ret == -ENOTSUP)
ret = rte_pmd_i40e_set_tx_loopback(res->port_id, is_on);
@@ -11441,7 +11447,12 @@ cmd_set_all_queues_drop_en_parsed(
if (port_id_is_invalid(res->port_id, ENABLED_WARN))
return;
- ret = rte_pmd_ixgbe_set_all_queues_drop_en(res->port_id, is_on);
+#ifdef RTE_LIBRTE_BNXT_PMD
+ ret = rte_pmd_bnxt_set_all_queues_drop_en(res->port_id, is_on);
+#endif
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ ret = rte_pmd_ixgbe_set_all_queues_drop_en(res->port_id, is_on);
+#endif
switch (ret) {
case 0:
break;
diff --git a/drivers/net/bnxt/Makefile b/drivers/net/bnxt/Makefile
index 65aaa92..c06476b 100644
--- a/drivers/net/bnxt/Makefile
+++ b/drivers/net/bnxt/Makefile
@@ -60,11 +60,13 @@ SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_txq.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_txr.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_vnic.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_irq.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += rte_pmd_bnxt.c
#
# Export include files
#
SYMLINK-y-include +=
+SYMLINK-$(CONFIG_RTE_LIBRTE_BNXT_PMD)-include += rte_pmd_bnxt.h
# this lib depends upon:
DEPDIRS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += lib/librte_mbuf
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index f2887d1..7cc3f3f 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -74,7 +74,13 @@ struct bnxt_pf_info {
uint32_t func_cfg_flags;
void *vf_req_buf;
uint32_t vf_req_fwd[8];
+ uint16_t total_vnics;
struct bnxt_child_vf_info *vf_info;
+#define BNXT_EVB_MODE_NONE 0
+#define BNXT_EVB_MODE_VEB 1
+#define BNXT_EVB_MODE_VEPA 2
+ uint8_t evb_mode;
+ uint16_t vnic_dflt_ring_group[340];
};
/* Max wait time is 10 * 100ms = 1s */
@@ -177,4 +183,6 @@ struct bnxt {
int bnxt_link_update_op(struct rte_eth_dev *eth_dev, int wait_to_complete);
+int bnxt_rcv_msg_from_vf(struct bnxt *bp, uint16_t vf_id, void *msg);
+
#endif
diff --git a/drivers/net/bnxt/bnxt_cpr.c b/drivers/net/bnxt/bnxt_cpr.c
index 5d961f6..3fc3758 100644
--- a/drivers/net/bnxt/bnxt_cpr.c
+++ b/drivers/net/bnxt/bnxt_cpr.c
@@ -68,8 +68,9 @@ void bnxt_handle_fwd_req(struct bnxt *bp, struct cmpl_base *cmpl)
struct hwrm_exec_fwd_resp_input *fwreq;
struct hwrm_fwd_req_cmpl *fwd_cmpl = (struct hwrm_fwd_req_cmpl *)cmpl;
struct input *fwd_cmd;
- uint16_t vf_id;
+ uint16_t fw_vf_id;
uint16_t req_len;
+ int rc;
if (bp->pf.active_vfs <= 0) {
RTE_LOG(ERR, PMD, "Forwarded VF with no active VFs\n");
@@ -77,7 +78,7 @@ void bnxt_handle_fwd_req(struct bnxt *bp, struct cmpl_base *cmpl)
}
/* Qualify the fwd request */
- vf_id = rte_le_to_cpu_16(fwd_cmpl->source_id);
+ fw_vf_id = rte_le_to_cpu_16(fwd_cmpl->source_id);
/*
* TODO: req_len is always 128, is there a way to get the
@@ -90,28 +91,42 @@ void bnxt_handle_fwd_req(struct bnxt *bp, struct cmpl_base *cmpl)
/* Locate VF's forwarded command */
fwd_cmd = (struct input *)
- bp->pf.vf_info[vf_id - bp->pf.first_vf_id].req_buf;
+ bp->pf.vf_info[fw_vf_id - bp->pf.first_vf_id].req_buf;
/* Force the target ID to the source VF */
- fwd_cmd->target_id = rte_cpu_to_le_16(vf_id);
+ fwd_cmd->target_id = rte_cpu_to_le_16(fw_vf_id);
- if (vf_id < bp->pf.first_vf_id ||
- vf_id >= (bp->pf.first_vf_id) + bp->pf.active_vfs) {
+ if (fw_vf_id < bp->pf.first_vf_id ||
+ fw_vf_id >= (bp->pf.first_vf_id) + bp->pf.active_vfs) {
RTE_LOG(ERR, PMD,
"FWD req src_id 0x%x out of range 0x%x - 0x%x(%d %d)\n",
- vf_id, bp->pf.first_vf_id,
+ fw_vf_id, bp->pf.first_vf_id,
(bp->pf.first_vf_id) + bp->pf.active_vfs - 1,
bp->pf.first_vf_id, bp->pf.active_vfs);
goto reject;
}
- /* TODO: Call "mailbox" callback if necessary */
-
- /* Forward */
- bnxt_hwrm_exec_fwd_resp(bp, vf_id, fwd_cmd, req_len);
- return;
+ if (bnxt_rcv_msg_from_vf(bp, fw_vf_id - bp->pf.first_vf_id, fwd_cmd) ==
+ true) {
+ /* Forward */
+ rc = bnxt_hwrm_exec_fwd_resp(bp, fw_vf_id, fwd_cmd, req_len);
+ if (rc) {
+ RTE_LOG(ERR, PMD,
+ "Failed to send FWD req VF 0x%x, type 0x%x.\n",
+ fw_vf_id - bp->pf.first_vf_id,
+ rte_le_to_cpu_16(fwd_cmd->req_type));
+ }
+ return;
+ }
reject:
- bnxt_hwrm_reject_fwd_resp(bp, vf_id, fwd_cmd, req_len);
+ rc = bnxt_hwrm_reject_fwd_resp(bp, fw_vf_id, fwd_cmd, req_len);
+ if (rc) {
+ RTE_LOG(ERR, PMD,
+ "Failed to send REJECT req VF 0x%x, type 0x%x.\n",
+ fw_vf_id - bp->pf.first_vf_id,
+ rte_le_to_cpu_16(fwd_cmd->req_type));
+ }
+
return;
}
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index b7732e0..ea5e11c 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -52,6 +52,7 @@
#include "bnxt_txr.h"
#include "bnxt_vnic.h"
#include "hsi_struct_def_dpdk.h"
+#include "rte_pmd_bnxt.h"
#define DRV_MODULE_NAME "bnxt"
static const char bnxt_version[] =
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 02e483e..f0107d6 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -128,7 +128,7 @@ static int bnxt_hwrm_send_message_locked(struct bnxt *bp, void *msg,
}
if (i >= HWRM_CMD_TIMEOUT) {
- RTE_LOG(ERR, PMD, "Error sending msg %x\n",
+ RTE_LOG(ERR, PMD, "Error sending msg 0x%04x\n",
req->req_type);
goto err_ret;
}
@@ -333,6 +333,8 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
bp->max_l2_ctx = rte_le_to_cpu_16(resp->max_l2_ctxs);
bp->max_vnics = rte_le_to_cpu_16(resp->max_vnics);
bp->max_stat_ctx = rte_le_to_cpu_16(resp->max_stat_ctx);
+ if (BNXT_PF(bp))
+ bp->pf.total_vnics = rte_le_to_cpu_16(resp->max_vnics);
return rc;
}
@@ -851,10 +853,11 @@ int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic)
}
vnic->fw_grp_ids[j] = bp->grp_info[i].fw_grp_id;
}
-
+ vnic->dflt_ring_grp = bp->grp_info[vnic->start_grp_id].fw_grp_id;
vnic->fw_rss_cos_lb_ctx = (uint16_t)HWRM_NA_SIGNATURE;
vnic->ctx_is_rss_cos_lb = HW_CONTEXT_NONE;
-
+ vnic->mru = bp->eth_dev->data->mtu + ETHER_HDR_LEN +
+ ETHER_CRC_LEN + VLAN_TAG_SIZE;
HWRM_PREP(req, VNIC_ALLOC, -1, resp);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
@@ -892,11 +895,47 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic)
if (vnic->vlan_strip)
req.flags |=
rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE);
+ if (vnic->bd_stall)
+ req.flags |=
+ rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
+int bnxt_hwrm_vnic_qcfg(struct bnxt *bp, struct bnxt_vnic_info *vnic,
+ int16_t fw_vf_id)
+{
+ int rc = 0;
+ struct hwrm_vnic_qcfg_input req = {.req_type = 0 };
+ struct hwrm_vnic_qcfg_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, VNIC_QCFG, -1, resp);
+
+ req.enables =
+ rte_cpu_to_le_32(HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID);
+ req.vnic_id = rte_cpu_to_le_16(vnic->fw_vnic_id);
+ req.vf_id = rte_cpu_to_le_16(fw_vf_id);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
HWRM_CHECK_RESULT;
+ vnic->dflt_ring_grp = rte_le_to_cpu_16(resp->dflt_ring_grp);
+ vnic->fw_rss_cos_lb_ctx = rte_le_to_cpu_16(resp->rss_rule);
+ // vnic->cos_rule = rte_le_to_cpu_16(resp->cos_rule);
+ // vnic->lb_rule = rte_le_to_cpu_16(resp->lb_rule);
+ vnic->mru = rte_le_to_cpu_16(resp->mru);
+ vnic->func_default = rte_le_to_cpu_32(resp->flags) &
+ HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT;
+ vnic->vlan_strip = rte_le_to_cpu_32(resp->flags) &
+ HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE;
+ vnic->bd_stall = rte_le_to_cpu_32(resp->flags) &
+ HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE;
+
return rc;
}
@@ -983,6 +1022,56 @@ int bnxt_hwrm_vnic_rss_cfg(struct bnxt *bp,
return rc;
}
+int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on)
+{
+ struct hwrm_func_vf_vnic_ids_query_input req = {0};
+ struct hwrm_func_vf_vnic_ids_query_output *resp =
+ bp->hwrm_cmd_resp_addr;
+ struct bnxt_vnic_info vnic;
+ int rc;
+ uint32_t i, num_vnic_ids;
+ uint16_t *vnic_ids;
+
+ /* First query all VNIC ids */
+
+ vnic_ids = rte_malloc("bnxt_hwrm_vf_vnic_ids_query",
+ bp->pf.total_vnics * sizeof(*vnic_ids),
+ RTE_CACHE_LINE_SIZE);
+ if (vnic_ids == NULL)
+ return -ENOMEM;
+
+ HWRM_PREP(req, FUNC_VF_VNIC_IDS_QUERY, -1, resp_vf_vnic_ids);
+
+ req.vf_id = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
+ req.max_vnic_id_cnt = rte_cpu_to_le_32(bp->pf.total_vnics);
+ req.vnic_id_tbl_addr = rte_malloc_virt2phy(vnic_ids);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ num_vnic_ids = rte_le_to_cpu_32(resp->vnic_id_cnt);
+
+ /* Retrieve VNIC, update bd_stall then update */
+
+ for (i = 0; i < num_vnic_ids; i++) {
+ memset(&vnic, 0, sizeof(struct bnxt_vnic_info));
+ vnic.fw_vnic_id = rte_le_to_cpu_16(vnic_ids[i]);
+ rc = bnxt_hwrm_vnic_qcfg(bp, &vnic, bp->pf.first_vf_id + vf);
+ if (rc)
+ break;
+
+ vnic.bd_stall = on;
+
+ rc = bnxt_hwrm_vnic_cfg(bp, &vnic);
+ if (rc)
+ break;
+ }
+
+ rte_free(vnic_ids);
+
+ return rc;
+}
+
int bnxt_hwrm_func_buf_rgtr(struct bnxt *bp)
{
int rc = 0;
@@ -1812,6 +1901,7 @@ static int update_pf_resource_max(struct bnxt *bp)
HWRM_CHECK_RESULT;
bp->max_tx_rings = rte_le_to_cpu_16(resp->alloc_tx_rings);
+ bp->pf.evb_mode = resp->evb_mode;
/* TODO: Only TX ring value reflects actual allocation */
//bp->pf.active_vfs = rte_le_to_cpu_16(resp->alloc_vfs);
//bp->max_rx_rings = rte_le_to_cpu_16(resp->alloc_rx_rings);
@@ -1943,3 +2033,21 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
bnxt_hwrm_func_buf_unrgtr(bp);
return rc;
}
+
+int bnxt_hwrm_pf_evb_mode(struct bnxt *bp)
+{
+ struct hwrm_func_cfg_input req = {0};
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(0xffff);
+ req.enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE);
+ req.evb_mode = bp->pf.evb_mode;
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 6ae2380..b7c5b34 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -85,6 +85,8 @@ int bnxt_hwrm_ver_get(struct bnxt *bp);
int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic);
int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic);
+int bnxt_hwrm_vnic_qcfg(struct bnxt *bp, struct bnxt_vnic_info *vnic,
+ int16_t fw_vf_id);
int bnxt_hwrm_vnic_ctx_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic);
int bnxt_hwrm_vnic_ctx_free(struct bnxt *bp, struct bnxt_vnic_info *vnic);
int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic);
@@ -107,5 +109,7 @@ int bnxt_set_hwrm_link_config(struct bnxt *bp, bool link_up);
int bnxt_hwrm_func_qcfg(struct bnxt *bp);
int bnxt_hwrm_allocate_pf_only(struct bnxt *bp);
int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
+int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on);
+int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
#endif
diff --git a/drivers/net/bnxt/bnxt_irq.c b/drivers/net/bnxt/bnxt_irq.c
index 2842ba8..86f844c 100644
--- a/drivers/net/bnxt/bnxt_irq.c
+++ b/drivers/net/bnxt/bnxt_irq.c
@@ -104,7 +104,8 @@ void bnxt_disable_int(struct bnxt *bp)
struct bnxt_cp_ring_info *cpr = bp->def_cp_ring;
/* Only the default completion ring */
- B_CP_DIS_DB(cpr, cpr->cp_raw_cons);
+ if (cpr != NULL && cpr->cp_doorbell != NULL)
+ B_CP_DIS_DB(cpr, cpr->cp_raw_cons);
}
void bnxt_enable_int(struct bnxt *bp)
diff --git a/drivers/net/bnxt/bnxt_vnic.h b/drivers/net/bnxt/bnxt_vnic.h
index 9671ba4..6f099a9 100644
--- a/drivers/net/bnxt/bnxt_vnic.h
+++ b/drivers/net/bnxt/bnxt_vnic.h
@@ -51,6 +51,8 @@ struct bnxt_vnic_info {
uint16_t start_grp_id;
uint16_t end_grp_id;
uint16_t fw_grp_ids[MAX_QUEUES_PER_VNIC];
+ uint16_t dflt_ring_grp;
+ uint16_t mru;
uint16_t hash_type;
phys_addr_t rss_table_dma_addr;
uint16_t *rss_table;
@@ -62,6 +64,7 @@ struct bnxt_vnic_info {
bool vlan_strip;
bool func_default;
+ bool bd_stall;
STAILQ_HEAD(, bnxt_filter_info) filter;
};
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
new file mode 100644
index 0000000..679e2c1
--- /dev/null
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -0,0 +1,143 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) Broadcom Limited.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <inttypes.h>
+#include <stdbool.h>
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_cycles.h>
+#include <rte_byteorder.h>
+
+#include "bnxt.h"
+#include "bnxt_filter.h"
+#include "bnxt_hwrm.h"
+#include "bnxt_vnic.h"
+#include "rte_pmd_bnxt.h"
+#include "hsi_struct_def_dpdk.h"
+
+int rte_pmd_bnxt_set_tx_loopback(uint8_t port, uint8_t on)
+{
+ struct rte_eth_dev *eth_dev;
+ struct bnxt *bp;
+ int rc;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ if (on > 1)
+ return -EINVAL;
+
+ eth_dev = &rte_eth_devices[port];
+ bp = (struct bnxt *)eth_dev->data->dev_private;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to set Tx loopback on non-PF port %d!\n",
+ port);
+ return -ENOTSUP;
+ }
+
+ if (on)
+ bp->pf.evb_mode = BNXT_EVB_MODE_VEB;
+ else
+ bp->pf.evb_mode = BNXT_EVB_MODE_VEPA;
+
+ rc = bnxt_hwrm_pf_evb_mode(bp);
+
+ return rc;
+}
+
+int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on)
+{
+ struct rte_eth_dev *eth_dev;
+ struct bnxt *bp;
+ uint32_t i;
+ int rc;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ if (on > 1)
+ return -EINVAL;
+
+ eth_dev = &rte_eth_devices[port];
+ bp = (struct bnxt *)eth_dev->data->dev_private;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to set all queues drop on non-PF port!\n");
+ return -ENOTSUP;
+ }
+
+ if (bp->vnic_info == NULL)
+ return -ENODEV;
+
+ /* Stall PF */
+ for (i = 0; i < bp->nr_vnics; i++) {
+ bp->vnic_info[i].bd_stall = !on;
+ rc = bnxt_hwrm_vnic_cfg(bp, &bp->vnic_info[i]);
+ if (rc) {
+ RTE_LOG(ERR, PMD, "Failed to update PF VNIC %d.\n", i);
+ return rc;
+ }
+ }
+
+ /* Stall all active VFs */
+ for (i = 0; i < bp->pf.active_vfs; i++) {
+ rc = bnxt_hwrm_func_vf_stall(bp, i, !on);
+ if (rc) {
+ RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", i);
+ break;
+ }
+ }
+
+ return rc;
+}
+
+int bnxt_rcv_msg_from_vf(struct bnxt *bp, uint16_t vf_id, void *msg)
+{
+ struct rte_pmd_bnxt_mb_event_param cb_param;
+
+ cb_param.retval = RTE_PMD_BNXT_MB_EVENT_PROCEED;
+ cb_param.vf_id = vf_id;
+ cb_param.msg = msg;
+
+ _rte_eth_dev_callback_process(bp->eth_dev, RTE_ETH_EVENT_VF_MBOX,
+ &cb_param);
+
+ /* Default to approve */
+ if (cb_param.retval == RTE_PMD_BNXT_MB_EVENT_PROCEED)
+ cb_param.retval = RTE_PMD_BNXT_MB_EVENT_NOOP_ACK;
+
+ return cb_param.retval == RTE_PMD_BNXT_MB_EVENT_NOOP_ACK ? true : false;
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
new file mode 100644
index 0000000..4394a66
--- /dev/null
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -0,0 +1,98 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) Broadcom Limited.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _PMD_BNXT_H_
+#define _PMD_BNXT_H_
+
+#include <rte_ethdev.h>
+
+/**
+ * Response sent back to bnxt driver from user app after callback
+ */
+enum rte_pmd_bnxt_mb_event_rsp {
+ RTE_PMD_BNXT_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */
+ RTE_PMD_BNXT_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */
+ RTE_PMD_BNXT_MB_EVENT_PROCEED, /**< proceed with mbox request */
+ RTE_PMD_BNXT_MB_EVENT_MAX /**< max value of this enum */
+};
+
+/* mailbox message types */
+#define BNXT_VF_RESET 0x01 /* VF requests reset */
+#define BNXT_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC */
+#define BNXT_VF_SET_VLAN 0x03 /* VF requests PF to set VLAN */
+#define BNXT_VF_SET_MTU 0x04 /* VF requests PF to set MTU */
+#define BNXT_VF_SET_MRU 0x05 /* VF requests PF to set MRU */
+/* TODO expose more */
+
+/**
+ * Data sent to the user application when the callback is executed.
+ */
+struct rte_pmd_bnxt_mb_event_param {
+ uint16_t vf_id; /**< Virtual Function number */
+ int16_t retval; /**< return value */
+ void *msg; /**< pointer to message */
+};
+
+/**
+ * Enable/Disable tx loopback
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param on
+ * 1 - Enable tx loopback.
+ * 0 - Disable tx loopback.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_tx_loopback(uint8_t port, uint8_t on);
+
+/**
+ * set all queues drop enable bit
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param on
+ * 1 - set the queue drop enable bit for all pools.
+ * 0 - reset the queue drop enable bit for all pools.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on);
+
+#endif /* _PMD_BNXT_H_ */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index 349c6e1..6bfafaa 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -1,4 +1,7 @@
-DPDK_16.04 {
+DPDK_17.05 {
+ global:
- local: *;
+ rte_pmd_bnxt_set_tx_loopback;
+ rte_pmd_bnxt_set_all_queues_drop_en;
};
+
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 08/28] bnxt: support setting VF mac address
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (6 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 07/28] bnxt: add functions for tx_loopback and queues_drop_en Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 09/28] bnxt: add code to support VF QOS configuration Ajit Khaparde
` (20 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Steeven Li
Add support to set a VF MAC address.
This patch also extends testpmd to call the appropriate vendor specific
function to set the VF MAC address.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
app/test-pmd/cmdline.c | 5 +++++
drivers/net/bnxt/bnxt_hwrm.c | 20 ++++++++++++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 1 +
drivers/net/bnxt/rte_pmd_bnxt.c | 29 +++++++++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.h | 17 +++++++++++++++++
5 files changed, 72 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 1465685..6e51260 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -11634,6 +11634,11 @@ cmd_set_vf_mac_addr_parsed(
ret = rte_pmd_ixgbe_set_vf_mac_addr(res->port_id, res->vf_id,
&res->mac_addr);
#endif
+#ifdef RTE_LIBRTE_BNXT_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_bnxt_set_vf_mac_addr(res->port_id, res->vf_id,
+ &res->mac_addr);
+#endif
#ifdef RTE_LIBRTE_I40E_PMD
if (ret == -ENOTSUP)
ret = rte_pmd_i40e_set_vf_mac_addr(res->port_id, res->vf_id,
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index f0107d6..a519204 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -1072,6 +1072,26 @@ int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on)
return rc;
}
+int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, uint8_t *mac_addr)
+{
+ struct hwrm_func_cfg_input req = {0};
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
+ req.enables =
+ rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR);
+ memcpy(req.dflt_mac_addr, mac_addr, sizeof(req.dflt_mac_addr));
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
int bnxt_hwrm_func_buf_rgtr(struct bnxt *bp)
{
int rc = 0;
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index b7c5b34..6517084 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -110,6 +110,7 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp);
int bnxt_hwrm_allocate_pf_only(struct bnxt *bp);
int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on);
+int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, uint8_t *mac_addr);
int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
#endif
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index 679e2c1..daecb31 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -141,3 +141,32 @@ int bnxt_rcv_msg_from_vf(struct bnxt *bp, uint16_t vf_id, void *msg)
return cb_param.retval == RTE_PMD_BNXT_MB_EVENT_NOOP_ACK ? true : false;
}
+
+int rte_pmd_bnxt_set_vf_mac_addr(uint8_t port, uint16_t vf,
+ struct ether_addr *mac_addr)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+ int rc;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf >= dev_info.max_vfs || mac_addr == NULL)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to set VF %d mac address on non-PF port %d!\n",
+ vf, port);
+ return -ENOTSUP;
+ }
+
+ rc = bnxt_hwrm_func_vf_mac(bp, vf, (uint8_t *)mac_addr);
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index 4394a66..da5b57b 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -37,6 +37,23 @@
#include <rte_ethdev.h>
/**
+ * Set the VF MAC address.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param mac_addr
+ * VF MAC address.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int rte_pmd_bnxt_set_vf_mac_addr(uint8_t port, uint16_t vf,
+ struct ether_addr *mac_addr);
+
+/**
* Response sent back to bnxt driver from user app after callback
*/
enum rte_pmd_bnxt_mb_event_rsp {
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 09/28] bnxt: add code to support VF QOS configuration
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (7 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 08/28] bnxt: support setting VF mac address Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 10/28] bnxt: support for VF VLAN filtering Ajit Khaparde
` (19 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
This patch adds support to configure MAX Tx rate for the specified VF.
It also extends the testpmd app to call rte_pmd_bnxt_set_vf_rate_limit
when bnxt PMD is in use.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
app/test-pmd/config.c | 16 ++++++++---
drivers/net/bnxt/bnxt.h | 1 +
drivers/net/bnxt/bnxt_hwrm.c | 18 ++++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 3 +-
drivers/net/bnxt/rte_pmd_bnxt.c | 48 +++++++++++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.h | 18 ++++++++++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 1 +
7 files changed, 100 insertions(+), 5 deletions(-)
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 80491fc..aafc53c 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -97,6 +97,9 @@
#ifdef RTE_LIBRTE_IXGBE_PMD
#include <rte_pmd_ixgbe.h>
#endif
+#ifdef RTE_LIBRTE_BNXT_PMD
+#include <rte_pmd_bnxt.h>
+#endif
#include "testpmd.h"
@@ -3046,17 +3049,22 @@ set_queue_rate_limit(portid_t port_id, uint16_t queue_idx, uint16_t rate)
return diag;
}
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#if defined(RTE_LIBRTE_IXGBE_PMD) || (RTE_LIBRTE_BNXT_PMD)
int
set_vf_rate_limit(portid_t port_id, uint16_t vf, uint16_t rate, uint64_t q_msk)
{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
int diag;
- diag = rte_pmd_ixgbe_set_vf_rate_limit(port_id, vf, rate, q_msk);
+ if (strcmp(dev->driver->pci_drv.driver.name, "net_bnxt") == 0)
+ diag = rte_pmd_bnxt_set_vf_rate_limit(port_id, vf, rate,
+ q_msk);
+ else
+ diag = rte_pmd_ixgbe_set_vf_rate_limit(port_id, vf, rate,
+ q_msk);
if (diag == 0)
return diag;
- printf("rte_pmd_ixgbe_set_vf_rate_limit for port_id=%d failed diag=%d\n",
- port_id, diag);
+ printf("set_vf_rate_limit for port_id=%d failed %d\n", port_id, diag);
return diag;
}
#endif
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 7cc3f3f..123de78 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -56,6 +56,7 @@ enum bnxt_hw_context {
struct bnxt_child_vf_info {
uint16_t fid;
+ uint16_t max_tx_rate;
uint32_t func_cfg_flags;
void *req_buf;
};
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index a519204..b8bd8cb 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2071,3 +2071,21 @@ int bnxt_hwrm_pf_evb_mode(struct bnxt *bp)
return rc;
}
+
+int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
+ uint16_t max_bw, uint16_t enables)
+{
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ struct hwrm_func_cfg_input req = {0};
+ int rc;
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
+ req.enables |= rte_cpu_to_le_32(enables);
+ req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
+ req.max_bw = rte_cpu_to_le_32(max_bw);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 6517084..c07c648 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -112,5 +112,6 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on);
int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, uint8_t *mac_addr);
int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
-
+int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
+ uint16_t max_bw, uint16_t enables);
#endif
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index daecb31..a4e5417 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -170,3 +170,51 @@ int rte_pmd_bnxt_set_vf_mac_addr(uint8_t port, uint16_t vf,
return rc;
}
+
+int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
+ uint16_t tx_rate, uint64_t q_msk)
+{
+ struct rte_eth_dev *eth_dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+ uint16_t tot_rate = 0;
+ uint64_t idx;
+ int rc;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ eth_dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)eth_dev->data->dev_private;
+
+ if (!bp->pf.active_vfs)
+ return -EINVAL;
+
+ if (vf >= bp->pf.max_vfs)
+ return -EINVAL;
+
+ /* Add up the per queue BW and configure MAX BW of the VF */
+ for (idx = 0; idx < 64; idx++) {
+ if ((1ULL << idx) & q_msk)
+ tot_rate += tx_rate;
+ }
+
+ /* Requested BW can't be greater than link speed */
+ if (tot_rate > eth_dev->data->dev_link.link_speed) {
+ RTE_LOG(ERR, PMD, "Rate > Link speed. Set to %d\n", tot_rate);
+ return -EINVAL;
+ }
+
+ /* Requested BW already configured */
+ if (tot_rate == bp->pf.vf_info[vf].max_tx_rate)
+ return 0;
+
+ rc = bnxt_hwrm_func_bw_cfg(bp, vf, tot_rate,
+ HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW);
+
+ if (!rc)
+ bp->pf.vf_info[vf].max_tx_rate = tot_rate;
+
+ return rc;
+}
+
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index da5b57b..ffacda5 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -112,4 +112,22 @@ int rte_pmd_bnxt_set_tx_loopback(uint8_t port, uint8_t on);
*/
int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on);
+/**
+ * Set the VF rate limit.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param tx_rate
+ * Tx rate for the VF
+ * @param q_msk
+ * Mask of the Tx queue
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
+ uint16_t tx_rate, uint64_t q_msk);
#endif /* _PMD_BNXT_H_ */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index 6bfafaa..d01b1e0 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -3,5 +3,6 @@ DPDK_17.05 {
rte_pmd_bnxt_set_tx_loopback;
rte_pmd_bnxt_set_all_queues_drop_en;
+ rte_pmd_bnxt_set_vf_mac_addr;
};
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 10/28] bnxt: support for VF VLAN filtering
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (8 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 09/28] bnxt: add code to support VF QOS configuration Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 11/28] bnxt: set the VMDQ pool size correctly Ajit Khaparde
` (18 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
This patch adds support to enable/disable hardware VF VLAN filtering
of received VLAN packets tagged with a specified VLAN Tag Identifier.
This patch also modifies testpmd to call the appropriate function
when bnxt PMD is in use.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
app/test-pmd/cmdline.c | 5 +++++
drivers/net/bnxt/bnxt_hwrm.c | 18 ++++++++++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 1 +
drivers/net/bnxt/rte_pmd_bnxt.c | 30 ++++++++++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.h | 22 ++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 1 +
6 files changed, 77 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 6e51260..a93297e 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -6919,6 +6919,11 @@ cmd_vf_rx_vlan_filter_parsed(void *parsed_result,
ret = rte_pmd_ixgbe_set_vf_vlan_filter(res->port_id,
res->vlan_id, res->vf_mask, is_add);
#endif
+#ifdef RTE_LIBRTE_BNXT_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_bnxt_set_vf_vlan_filter(res->port_id,
+ res->vlan_id, res->vf_mask, is_add);
+#endif
#ifdef RTE_LIBRTE_I40E_PMD
if (ret == -ENOTSUP)
ret = rte_pmd_i40e_set_vf_vlan_filter(res->port_id,
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index b8bd8cb..0aa2234 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2089,3 +2089,21 @@ int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
return rc;
}
+
+int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan)
+{
+ struct hwrm_func_cfg_input req = {0};
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc = 0;
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+ req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
+ req.enables |= rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN);
+ req.dflt_vlan = rte_cpu_to_le_16(vlan);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index c07c648..2f245e5 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -112,6 +112,7 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on);
int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, uint8_t *mac_addr);
int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
+int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan);
int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
uint16_t max_bw, uint16_t enables);
#endif
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index a4e5417..901e356 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -218,3 +218,33 @@ int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
return rc;
}
+int rte_pmd_bnxt_set_vf_vlan_filter(uint8_t port, uint16_t vlan,
+ uint64_t vf_mask, uint8_t vlan_on)
+{
+ struct rte_eth_dev *eth_dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+ int i;
+ int ret;
+ int rc = 0;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ eth_dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)eth_dev->data->dev_private;
+
+ if (!bp->pf.vf_info)
+ return -EINVAL;
+
+ for (i = 0; vf_mask; i++, vf_mask >>= 1) {
+ if (vf_mask & 1) {
+ ret = bnxt_hwrm_set_vf_vlan(bp, i, vlan_on ? vlan : 0);
+ if (ret)
+ rc = ret;
+ }
+ }
+
+ return rc;
+}
+
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index ffacda5..3237cec 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -130,4 +130,26 @@ int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on);
*/
int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
uint16_t tx_rate, uint64_t q_msk);
+
+/**
+ * Enable/Disable hardware VF VLAN filtering by an Ethernet device of
+ * received VLAN packets tagged with a given VLAN Tag Identifier.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vlan
+ * The VLAN Tag Identifier whose filtering must be enabled or disabled.
+ * @param vf_mask
+ * Bitmap listing which VFs participate in the VLAN filtering.
+ * @param vlan_on
+ * 1 - Enable VFs VLAN filtering.
+ * 0 - Disable VFs VLAN filtering.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_vf_vlan_filter(uint8_t port, uint16_t vlan,
+ uint64_t vf_mask, uint8_t vlan_on);
#endif /* _PMD_BNXT_H_ */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index d01b1e0..8af7ee0 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -4,5 +4,6 @@ DPDK_17.05 {
rte_pmd_bnxt_set_tx_loopback;
rte_pmd_bnxt_set_all_queues_drop_en;
rte_pmd_bnxt_set_vf_mac_addr;
+ rte_pmd_bnxt_set_vf_vlan_filter;
};
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 11/28] bnxt: set the VMDQ pool size correctly
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (9 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 10/28] bnxt: support for VF VLAN filtering Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 12/28] bnxt: improve some of the log messages Ajit Khaparde
` (17 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
Calculate the VMDQ pool size correctly:
For PFs the VMDQ count needs to be the minimum of all used and available
resources like vnic, l2 CTX, RSS CTX, or 64 (hard coded).
For VFs restrict the number of VMDQs to 1.
If VFs are enabled, only allocate a single vnic to each function.
This allows targeting a VF with a single L2 context.
In the future, we will enable VMDq on VFs.
We are essentially mapping VMDq pools to VNICs now. If there are
no VFs, the PF can use all VNICs as VMDq pools. If there are VFs,
each function (including the PF) will get a single VNIC.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_hwrm.c | 23 +++++++++++++++++++----
drivers/net/bnxt/bnxt_rxq.c | 8 +++++---
2 files changed, 24 insertions(+), 7 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 0aa2234..6f76748 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -312,7 +312,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
if (BNXT_PF(bp)) {
bp->pf.port_id = resp->port_id;
bp->pf.first_vf_id = rte_le_to_cpu_16(resp->first_vf_id);
- new_max_vfs = rte_le_to_cpu_16(resp->max_vfs);
+ new_max_vfs = bp->pdev->max_vfs;
if (new_max_vfs != bp->pf.max_vfs) {
if (bp->pf.vf_info)
rte_free(bp->pf.vf_info);
@@ -331,7 +331,15 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
bp->max_tx_rings = rte_le_to_cpu_16(resp->max_tx_rings);
bp->max_rx_rings = rte_le_to_cpu_16(resp->max_rx_rings);
bp->max_l2_ctx = rte_le_to_cpu_16(resp->max_l2_ctxs);
- bp->max_vnics = rte_le_to_cpu_16(resp->max_vnics);
+ /* TODO: For now, do not support VMDq/RFS on VFs. */
+ if (BNXT_PF(bp)) {
+ if (bp->pf.max_vfs)
+ bp->max_vnics = 1;
+ else
+ bp->max_vnics = rte_le_to_cpu_16(resp->max_vnics);
+ } else {
+ bp->max_vnics = 1;
+ }
bp->max_stat_ctx = rte_le_to_cpu_16(resp->max_stat_ctx);
if (BNXT_PF(bp))
bp->pf.total_vnics = rte_le_to_cpu_16(resp->max_vnics);
@@ -1842,6 +1850,8 @@ static void populate_vf_func_cfg_req(struct bnxt *bp,
req->num_rx_rings = rte_cpu_to_le_16(bp->max_rx_rings / (num_vfs + 1));
req->num_l2_ctxs = rte_cpu_to_le_16(bp->max_l2_ctx / (num_vfs + 1));
req->num_vnics = rte_cpu_to_le_16(bp->max_vnics / (num_vfs + 1));
+ /* TODO: For now, do not support VMDq/RFS on VFs. */
+ req->num_vnics = rte_cpu_to_le_16(1);
req->num_hw_ring_grps =
rte_cpu_to_le_16(bp->max_ring_grps / (num_vfs + 1));
}
@@ -1904,7 +1914,11 @@ static void reserve_resources_from_vf(struct bnxt *bp,
bp->max_tx_rings -= rte_le_to_cpu_16(resp->max_tx_rings);
bp->max_rx_rings -= rte_le_to_cpu_16(resp->max_rx_rings);
bp->max_l2_ctx -= rte_le_to_cpu_16(resp->max_l2_ctxs);
- bp->max_vnics -= rte_le_to_cpu_16(resp->max_vnics);
+ /* TODO:
+ * While not supporting VMDq with VFs, max_vnics is always
+ * forced to 1 in this case
+ */
+ //bp->max_vnics -= rte_le_to_cpu_16(esp->max_vnics);
bp->max_ring_grps -= rte_le_to_cpu_16(resp->max_hw_ring_grps);
}
@@ -2025,7 +2039,8 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
RTE_LOG(ERR, PMD,
"Failed to initizlie VF %d.\n", i);
RTE_LOG(ERR, PMD,
- "Not all VFs available.\n");
+ "Not all VFs available. (%d, %d)\n",
+ rc, resp->error_code);
break;
}
diff --git a/drivers/net/bnxt/bnxt_rxq.c b/drivers/net/bnxt/bnxt_rxq.c
index cddf17d..6f72a1b 100644
--- a/drivers/net/bnxt/bnxt_rxq.c
+++ b/drivers/net/bnxt/bnxt_rxq.c
@@ -121,9 +121,11 @@ int bnxt_mq_rx_configure(struct bnxt *bp)
}
/* For each pool, allocate MACVLAN CFA rule & VNIC */
if (!pools) {
+ pools = RTE_MIN(bp->max_vnics,
+ RTE_MIN(bp->max_l2_ctx,
+ RTE_MIN(bp->max_rsscos_ctx, ETH_64_POOLS)));
RTE_LOG(ERR, PMD,
- "VMDq pool not set, defaulted to 64\n");
- pools = ETH_64_POOLS;
+ "VMDq pool not set, defaulted to %d\n", pools);
}
nb_q_per_grp = bp->rx_cp_nr_rings / pools;
start_grp_id = 1;
@@ -134,7 +136,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp)
vnic = bnxt_alloc_vnic(bp);
if (!vnic) {
RTE_LOG(ERR, PMD,
- "VNIC alloc failed\n");
+ "VNIC %d alloc failed\n", i);
rc = -ENOMEM;
goto err_out;
}
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 12/28] bnxt: improve some of the log messages
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (10 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 11/28] bnxt: set the VMDQ pool size correctly Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 13/28] bnxt: fix interrupt handler Ajit Khaparde
` (16 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
This patch improves some of the log messages.
Log the VNIC ordinal to indicate the VNIC id, for which operation failed.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index ea5e11c..5625313 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -224,28 +224,32 @@ static int bnxt_init_chip(struct bnxt *bp)
rc = bnxt_hwrm_vnic_alloc(bp, vnic);
if (rc) {
- RTE_LOG(ERR, PMD, "HWRM vnic alloc failure rc: %x\n",
- rc);
+ RTE_LOG(ERR, PMD,
+ "HWRM vnic %d alloc failure rc: %x\n",
+ i, rc);
goto err_out;
}
rc = bnxt_hwrm_vnic_ctx_alloc(bp, vnic);
if (rc) {
RTE_LOG(ERR, PMD,
- "HWRM vnic ctx alloc failure rc: %x\n", rc);
+ "HWRM vnic %d ctx alloc failure rc: %x\n",
+ i, rc);
goto err_out;
}
rc = bnxt_hwrm_vnic_cfg(bp, vnic);
if (rc) {
- RTE_LOG(ERR, PMD, "HWRM vnic cfg failure rc: %x\n", rc);
+ RTE_LOG(ERR, PMD,
+ "HWRM vnic %d cfg failure rc: %x\n", i, rc);
goto err_out;
}
rc = bnxt_set_hwrm_vnic_filters(bp, vnic);
if (rc) {
- RTE_LOG(ERR, PMD, "HWRM vnic filter failure rc: %x\n",
- rc);
+ RTE_LOG(ERR, PMD,
+ "HWRM vnic %d filter failure rc: %x\n",
+ i, rc);
goto err_out;
}
if (vnic->rss_table && vnic->hash_type) {
@@ -265,8 +269,8 @@ static int bnxt_init_chip(struct bnxt *bp)
rc = bnxt_hwrm_vnic_rss_cfg(bp, vnic);
if (rc) {
RTE_LOG(ERR, PMD,
- "HWRM vnic set RSS failure rc: %x\n",
- rc);
+ "HWRM vnic %d set RSS failure rc: %x\n",
+ i, rc);
goto err_out;
}
}
@@ -634,7 +638,7 @@ int bnxt_link_update_op(struct rte_eth_dev *eth_dev, int wait_to_complete)
new.link_speed = ETH_LINK_SPEED_100M;
new.link_duplex = ETH_LINK_FULL_DUPLEX;
RTE_LOG(ERR, PMD,
- "Failed to retrieve link rc = 0x%x!", rc);
+ "Failed to retrieve link rc = 0x%x!\n", rc);
goto out;
}
rte_delay_ms(BNXT_LINK_WAIT_INTERVAL);
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 13/28] bnxt: fix interrupt handler
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (11 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 12/28] bnxt: improve some of the log messages Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 14/28] bnxt: Add support for udp_tunnel_port_add/del dev_ops Ajit Khaparde
` (15 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
bnxt_int_handler() wasn't updating the doorbell, meaning forward
requests got repeated.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_irq.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_irq.c b/drivers/net/bnxt/bnxt_irq.c
index 86f844c..880af95 100644
--- a/drivers/net/bnxt/bnxt_irq.c
+++ b/drivers/net/bnxt/bnxt_irq.c
@@ -78,6 +78,8 @@ static void bnxt_int_handler(struct rte_intr_handle *handle __rte_unused,
}
raw_cons = NEXT_RAW_CMP(raw_cons);
}
+
+ cpr->cp_raw_cons = raw_cons;
B_CP_DB_REARM(cpr, cpr->cp_raw_cons);
}
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 14/28] bnxt: Add support for udp_tunnel_port_add/del dev_ops
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (12 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 13/28] bnxt: fix interrupt handler Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 15/28] bnxt: Update tx offload capabilities Ajit Khaparde
` (14 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
Add support for udp_tunnel_port_add/del dev_ops to configure a UDP port
for VXLAN and Geneve Tunnel protocols.
The HWRM supports only one global destination port for a tunnel type,
use a referene counter to keep track of its usage.
Cache the configured VXLAN/Geneve ports and use that value to check
if the right UDP port is being freed up.
Skip calling bnxt_hwrm_tunnel_dst_port_alloc if the same UDP port is
being programmed.
Skip calling bnxt_hwrm_tunnel_dst_port_free if no UDP port has been
configured.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt.h | 6 ++
drivers/net/bnxt/bnxt_ethdev.c | 112 ++++++++++++++++++++
drivers/net/bnxt/bnxt_hwrm.c | 57 ++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 5 +
drivers/net/bnxt/bnxt_txr.c | 3 +-
drivers/net/bnxt/hsi_struct_def_dpdk.h | 185 +++++++++++++++++++++++++++++++++
6 files changed, 367 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 123de78..d577f73 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -180,6 +180,12 @@ struct bnxt {
struct bnxt_pf_info pf;
uint8_t port_partition_type;
uint8_t dev_stopped;
+ uint8_t vxlan_port_cnt;
+ uint8_t geneve_port_cnt;
+ uint16_t vxlan_port;
+ uint16_t geneve_port;
+ uint16_t vxlan_fw_dst_port_id;
+ uint16_t geneve_fw_dst_port_id;
};
int bnxt_link_update_op(struct rte_eth_dev *eth_dev, int wait_to_complete);
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 5625313..b81fded 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -972,6 +972,116 @@ static int bnxt_flow_ctrl_set_op(struct rte_eth_dev *dev,
return bnxt_set_hwrm_link_config(bp, true);
}
+/* Add UDP tunneling port */
+static int
+bnxt_udp_tunnel_port_add_op(struct rte_eth_dev *eth_dev,
+ struct rte_eth_udp_tunnel *udp_tunnel)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ uint16_t tunnel_type = 0;
+ int rc = 0;
+
+ switch (udp_tunnel->prot_type) {
+ case RTE_TUNNEL_TYPE_VXLAN:
+ if (bp->vxlan_port_cnt) {
+ RTE_LOG(ERR, PMD, "Tunnel Port %d already programmed\n",
+ udp_tunnel->udp_port);
+ if (bp->vxlan_port != udp_tunnel->udp_port) {
+ RTE_LOG(ERR, PMD, "Only one port allowed\n");
+ return -ENOSPC;
+ }
+ bp->vxlan_port_cnt++;
+ return 0;
+ }
+ tunnel_type =
+ HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN;
+ bp->vxlan_port_cnt++;
+ break;
+ case RTE_TUNNEL_TYPE_GENEVE:
+ if (bp->geneve_port_cnt) {
+ RTE_LOG(ERR, PMD, "Tunnel Port %d already programmed\n",
+ udp_tunnel->udp_port);
+ if (bp->geneve_port != udp_tunnel->udp_port) {
+ RTE_LOG(ERR, PMD, "Only one port allowed\n");
+ return -ENOSPC;
+ }
+ bp->geneve_port_cnt++;
+ return 0;
+ }
+ tunnel_type =
+ HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE;
+ bp->geneve_port_cnt++;
+ break;
+ default:
+ RTE_LOG(ERR, PMD, "Tunnel type is not supported\n");
+ return -ENOTSUP;
+ }
+ rc = bnxt_hwrm_tunnel_dst_port_alloc(bp, udp_tunnel->udp_port,
+ tunnel_type);
+ return rc;
+}
+
+static int
+bnxt_udp_tunnel_port_del_op(struct rte_eth_dev *eth_dev,
+ struct rte_eth_udp_tunnel *udp_tunnel)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ uint16_t tunnel_type = 0;
+ uint16_t port = 0;
+ int rc = 0;
+
+ switch (udp_tunnel->prot_type) {
+ case RTE_TUNNEL_TYPE_VXLAN:
+ if (!bp->vxlan_port_cnt) {
+ RTE_LOG(ERR, PMD, "No Tunnel port configured yet\n");
+ return -EINVAL;
+ }
+ if (bp->vxlan_port != udp_tunnel->udp_port) {
+ RTE_LOG(ERR, PMD, "Req Port: %d. Configured port: %d\n",
+ udp_tunnel->udp_port, bp->vxlan_port);
+ return -EINVAL;
+ }
+ if (--bp->vxlan_port_cnt)
+ return 0;
+
+ tunnel_type =
+ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN;
+ port = bp->vxlan_fw_dst_port_id;
+ break;
+ case RTE_TUNNEL_TYPE_GENEVE:
+ if (!bp->geneve_port_cnt) {
+ RTE_LOG(ERR, PMD, "No Tunnel port configured yet\n");
+ return -EINVAL;
+ }
+ if (bp->geneve_port != udp_tunnel->udp_port) {
+ RTE_LOG(ERR, PMD, "Req Port: %d. Configured port: %d\n",
+ udp_tunnel->udp_port, bp->geneve_port);
+ return -EINVAL;
+ }
+ if (--bp->geneve_port_cnt)
+ return 0;
+
+ tunnel_type =
+ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE;
+ port = bp->geneve_fw_dst_port_id;
+ break;
+ default:
+ RTE_LOG(ERR, PMD, "Tunnel type is not supported");
+ return -ENOTSUP;
+ }
+
+ rc = bnxt_hwrm_tunnel_dst_port_free(bp, port, tunnel_type);
+ if (!rc) {
+ if (tunnel_type ==
+ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN)
+ bp->vxlan_port = 0;
+ if (tunnel_type ==
+ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE)
+ bp->geneve_port = 0;
+ }
+ return rc;
+}
+
/*
* Initialization
*/
@@ -1003,6 +1113,8 @@ static const struct eth_dev_ops bnxt_dev_ops = {
.mac_addr_remove = bnxt_mac_addr_remove_op,
.flow_ctrl_get = bnxt_flow_ctrl_get_op,
.flow_ctrl_set = bnxt_flow_ctrl_set_op,
+ .udp_tunnel_port_add = bnxt_udp_tunnel_port_add_op,
+ .udp_tunnel_port_del = bnxt_udp_tunnel_port_del_op,
};
static bool bnxt_vf_pciid(uint16_t id)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 6f76748..afa86c5 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -1434,6 +1434,18 @@ int bnxt_set_hwrm_vnic_filters(struct bnxt *bp, struct bnxt_vnic_info *vnic)
return rc;
}
+void bnxt_free_tunnel_ports(struct bnxt *bp)
+{
+ if (bp->vxlan_port_cnt)
+ bnxt_hwrm_tunnel_dst_port_free(bp, bp->vxlan_fw_dst_port_id,
+ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN);
+ bp->vxlan_port = 0;
+ if (bp->geneve_port_cnt)
+ bnxt_hwrm_tunnel_dst_port_free(bp, bp->geneve_fw_dst_port_id,
+ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE);
+ bp->geneve_port = 0;
+}
+
void bnxt_free_all_hwrm_resources(struct bnxt *bp)
{
struct bnxt_vnic_info *vnic;
@@ -1459,6 +1471,7 @@ void bnxt_free_all_hwrm_resources(struct bnxt *bp)
bnxt_free_all_hwrm_rings(bp);
bnxt_free_all_hwrm_ring_grps(bp);
bnxt_free_all_hwrm_stat_ctxs(bp);
+ bnxt_free_tunnel_ports(bp);
}
static uint16_t bnxt_parse_eth_link_duplex(uint32_t conf_link_speed)
@@ -2087,6 +2100,50 @@ int bnxt_hwrm_pf_evb_mode(struct bnxt *bp)
return rc;
}
+int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
+ uint8_t tunnel_type)
+{
+ struct hwrm_tunnel_dst_port_alloc_input req = {0};
+ struct hwrm_tunnel_dst_port_alloc_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc = 0;
+
+ HWRM_PREP(req, TUNNEL_DST_PORT_ALLOC, -1, resp);
+ req.tunnel_type = tunnel_type;
+ req.tunnel_dst_port_val = port;
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ switch (tunnel_type) {
+ case HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN:
+ bp->vxlan_fw_dst_port_id = resp->tunnel_dst_port_id;
+ bp->vxlan_port = port;
+ break;
+ case HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE:
+ bp->geneve_fw_dst_port_id = resp->tunnel_dst_port_id;
+ bp->geneve_port = port;
+ break;
+ default:
+ break;
+ }
+ return rc;
+}
+
+int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, uint16_t port,
+ uint8_t tunnel_type)
+{
+ struct hwrm_tunnel_dst_port_free_input req = {0};
+ struct hwrm_tunnel_dst_port_free_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc = 0;
+
+ HWRM_PREP(req, TUNNEL_DST_PORT_FREE, -1, resp);
+ req.tunnel_type = tunnel_type;
+ req.tunnel_dst_port_id = rte_cpu_to_be_16(port);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
uint16_t max_bw, uint16_t enables)
{
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 2f245e5..38c63c2 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -115,4 +115,9 @@ int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan);
int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
uint16_t max_bw, uint16_t enables);
+int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
+ uint8_t tunnel_type);
+int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, uint16_t port,
+ uint8_t tunnel_type);
+void bnxt_free_tunnel_ports(struct bnxt *bp);
#endif
diff --git a/drivers/net/bnxt/bnxt_txr.c b/drivers/net/bnxt/bnxt_txr.c
index 0d15bb1..6870b16 100644
--- a/drivers/net/bnxt/bnxt_txr.c
+++ b/drivers/net/bnxt/bnxt_txr.c
@@ -213,7 +213,8 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt,
/* TSO */
txbd1->lflags = TX_BD_LONG_LFLAGS_LSO;
txbd1->hdr_size = tx_pkt->l2_len + tx_pkt->l3_len +
- tx_pkt->l4_len;
+ tx_pkt->l4_len + tx_pkt->outer_l2_len +
+ tx_pkt->outer_l3_len;
txbd1->mss = tx_pkt->tso_segsz;
} else if (tx_pkt->ol_flags & (PKT_TX_TCP_CKSUM |
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index bce854e..c2ca6f5 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -112,6 +112,8 @@ struct ctx_hw_stats64 {
#define HWRM_CFA_L2_FILTER_FREE (UINT32_C(0x91))
#define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92))
#define HWRM_CFA_L2_SET_RX_MASK (UINT32_C(0x93))
+#define HWRM_TUNNEL_DST_PORT_ALLOC (UINT32_C(0xa1))
+#define HWRM_TUNNEL_DST_PORT_FREE (UINT32_C(0xa2))
#define HWRM_STAT_CTX_ALLOC (UINT32_C(0xb0))
#define HWRM_STAT_CTX_FREE (UINT32_C(0xb1))
#define HWRM_STAT_CTX_CLR_STATS (UINT32_C(0xb3))
@@ -6612,6 +6614,189 @@ struct hwrm_cfa_l2_set_rx_mask_output {
*/
} __attribute__((packed));
+/* hwrm_tunnel_dst_port_alloc */
+/*
+ * Description: This function is called by a driver to allocate l4 destination
+ * port for a specific tunnel type. The destination port value is provided in
+ * the input. If the HWRM supports only one global destination port for a tunnel
+ * type, then the HWRM shall keep track of its usage as described below. # The
+ * first caller that allocates a destination port shall always succeed and the
+ * HWRM shall save the destination port configuration for that tunnel type and
+ * increment the usage count to 1. # Subsequent callers allocating the same
+ * destination port for that tunnel type shall succeed and the HWRM shall
+ * increment the usage count for that port for each subsequent caller that
+ * succeeds. # Any subsequent caller trying to allocate a different destination
+ * port for that tunnel type shall fail until the usage count for the original
+ * destination port goes to zero. # A caller that frees a port will cause the
+ * usage count for that port to decrement.
+ */
+/* Input (24 bytes) */
+struct hwrm_tunnel_dst_port_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ uint8_t unused_0;
+ uint16_t tunnel_dst_port_val;
+ /*
+ * This field represents the value of L4 destination port used
+ * for the given tunnel type. This field is valid for specific
+ * tunnel types that use layer 4 (e.g. UDP) transports for
+ * tunneling. This field is in network byte order. A value of 0
+ * shall fail the command.
+ */
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_tunnel_dst_port_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint16_t tunnel_dst_port_id;
+ /*
+ * Identifier of a tunnel L4 destination port value. Only
+ * applies to tunnel types that has l4 destination port
+ * parameters.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_tunnel_dst_port_free */
+/*
+ * Description: This function is called by a driver to free l4 destination port
+ * for a specific tunnel type.
+ */
+/* Input (24 bytes) */
+struct hwrm_tunnel_dst_port_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ uint8_t unused_0;
+ uint16_t tunnel_dst_port_id;
+ /*
+ * Identifier of a tunnel L4 destination port value. Only
+ * applies to tunnel types that has l4 destination port
+ * parameters.
+ */
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_tunnel_dst_port_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_stat_ctx_alloc */
/*
* Description: This command allocates and does basic preparation for a stat
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 15/28] bnxt: Update tx offload capabilities
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (13 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 14/28] bnxt: Add support for udp_tunnel_port_add/del dev_ops Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 16/28] bnxt: add support for set VF MAC anti spoof Ajit Khaparde
` (13 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
Update the tx offload capabilities of the PMD.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index b81fded..7bbda68 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -360,7 +360,12 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
dev_info->tx_offload_capa = DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
- DEV_TX_OFFLOAD_TCP_TSO;
+ DEV_TX_OFFLOAD_TCP_TSO |
+ DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO |
+ DEV_TX_OFFLOAD_IPIP_TNL_TSO |
+ DEV_TX_OFFLOAD_GENEVE_TNL_TSO;
/* *INDENT-OFF* */
dev_info->default_rxconf = (struct rte_eth_rxconf) {
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 16/28] bnxt: add support for set VF MAC anti spoof
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (14 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 15/28] bnxt: Update tx offload capabilities Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 17/28] bnxt: implement VF VLAN stripq functionality Ajit Khaparde
` (12 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
This patch adds support to enable VF MAC anti spoof.
It also adds code in testpmd to call the appropriate function while
configuring this setting when the bnxt PMD is in use.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
app/test-pmd/cmdline.c | 5 +++
drivers/net/bnxt/bnxt.h | 1 +
drivers/net/bnxt/bnxt_hwrm.c | 15 +++++++++
drivers/net/bnxt/bnxt_hwrm.h | 1 +
drivers/net/bnxt/rte_pmd_bnxt.c | 51 +++++++++++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.h | 17 +++++++++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 1 +
7 files changed, 91 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a93297e..9bdbf4c 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -11071,6 +11071,11 @@ cmd_set_vf_mac_anti_spoof_parsed(
ret = rte_pmd_ixgbe_set_vf_mac_anti_spoof(res->port_id,
res->vf_id, is_on);
#endif
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_bnxt_set_vf_mac_anti_spoof(res->port_id,
+ res->vf_id, is_on);
+#endif
#ifdef RTE_LIBRTE_I40E_PMD
if (ret == -ENOTSUP)
ret = rte_pmd_i40e_set_vf_mac_anti_spoof(res->port_id,
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index d577f73..9a23b1a 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -59,6 +59,7 @@ struct bnxt_child_vf_info {
uint16_t max_tx_rate;
uint32_t func_cfg_flags;
void *req_buf;
+ uint8_t mac_spoof_en;
};
struct bnxt_pf_info {
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index afa86c5..7247cdc 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2179,3 +2179,18 @@ int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan)
return rc;
}
+
+int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf)
+{
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ struct hwrm_func_cfg_input req = {0};
+ int rc;
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
+ req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 38c63c2..636ac13 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -120,4 +120,5 @@ int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, uint16_t port,
uint8_t tunnel_type);
void bnxt_free_tunnel_ports(struct bnxt *bp);
+int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf);
#endif
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index 901e356..d2a8532 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -248,3 +248,54 @@ int rte_pmd_bnxt_set_vf_vlan_filter(uint8_t port, uint16_t vlan,
return rc;
}
+int rte_pmd_bnxt_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_dev *dev;
+ uint32_t func_flags;
+ struct bnxt *bp;
+ int rc;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ if (on > 1)
+ return -EINVAL;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to set mac spoof on non-PF port %d!\n", port);
+ return -EINVAL;
+ }
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (on > 1)
+ return -EINVAL;
+
+ /* Prev setting same as new setting. */
+ if (on == bp->pf.vf_info[vf].mac_spoof_en)
+ return 0;
+
+ func_flags = bp->pf.vf_info[vf].func_cfg_flags;
+
+ if (on)
+ func_flags |=
+ HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE;
+ else
+ func_flags |=
+ HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE;
+
+ bp->pf.vf_info[vf].func_cfg_flags = func_flags;
+
+ rc = bnxt_hwrm_func_cfg_vf_set_flags(bp, vf);
+ if (!rc)
+ bp->pf.vf_info[vf].mac_spoof_en = on;
+
+ return rc;
+}
+
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index 3237cec..40e68ee 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -152,4 +152,21 @@ int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
*/
int rte_pmd_bnxt_set_vf_vlan_filter(uint8_t port, uint16_t vlan,
uint64_t vf_mask, uint8_t vlan_on);
+/**
+ * Enable/Disable VF MAC anti spoof
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param on
+ * 1 - Enable VF MAC anti spoof.
+ * 0 - Disable VF MAC anti spoof.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
#endif /* _PMD_BNXT_H_ */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index 8af7ee0..955903b 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -5,5 +5,6 @@ DPDK_17.05 {
rte_pmd_bnxt_set_all_queues_drop_en;
rte_pmd_bnxt_set_vf_mac_addr;
rte_pmd_bnxt_set_vf_vlan_filter;
+ rte_pmd_bnxt_set_vf_mac_anti_spoof;
};
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 17/28] bnxt: implement VF VLAN stripq functionality
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (15 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 16/28] bnxt: add support for set VF MAC anti spoof Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 18/28] bnxt: support lack of huge pages Ajit Khaparde
` (11 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
This patch adds code to configure VF VLAN stripping feature.
Reorganize the bnxt_hwrm_func_vf_stall() to bnxt_hwrm_func_vf_vnic_cfg_do
which will take a callback and use that for configuring with a VFs VNICs.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_hwrm.c | 107 ++++++++++++++++--------------
drivers/net/bnxt/bnxt_hwrm.h | 4 +-
drivers/net/bnxt/rte_pmd_bnxt.c | 49 +++++++++++++-
drivers/net/bnxt/rte_pmd_bnxt.h | 20 ++++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 1 +
5 files changed, 129 insertions(+), 52 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 7247cdc..a840683 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -1030,56 +1030,6 @@ int bnxt_hwrm_vnic_rss_cfg(struct bnxt *bp,
return rc;
}
-int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on)
-{
- struct hwrm_func_vf_vnic_ids_query_input req = {0};
- struct hwrm_func_vf_vnic_ids_query_output *resp =
- bp->hwrm_cmd_resp_addr;
- struct bnxt_vnic_info vnic;
- int rc;
- uint32_t i, num_vnic_ids;
- uint16_t *vnic_ids;
-
- /* First query all VNIC ids */
-
- vnic_ids = rte_malloc("bnxt_hwrm_vf_vnic_ids_query",
- bp->pf.total_vnics * sizeof(*vnic_ids),
- RTE_CACHE_LINE_SIZE);
- if (vnic_ids == NULL)
- return -ENOMEM;
-
- HWRM_PREP(req, FUNC_VF_VNIC_IDS_QUERY, -1, resp_vf_vnic_ids);
-
- req.vf_id = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
- req.max_vnic_id_cnt = rte_cpu_to_le_32(bp->pf.total_vnics);
- req.vnic_id_tbl_addr = rte_malloc_virt2phy(vnic_ids);
-
- rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
- HWRM_CHECK_RESULT;
-
- num_vnic_ids = rte_le_to_cpu_32(resp->vnic_id_cnt);
-
- /* Retrieve VNIC, update bd_stall then update */
-
- for (i = 0; i < num_vnic_ids; i++) {
- memset(&vnic, 0, sizeof(struct bnxt_vnic_info));
- vnic.fw_vnic_id = rte_le_to_cpu_16(vnic_ids[i]);
- rc = bnxt_hwrm_vnic_qcfg(bp, &vnic, bp->pf.first_vf_id + vf);
- if (rc)
- break;
-
- vnic.bd_stall = on;
-
- rc = bnxt_hwrm_vnic_cfg(bp, &vnic);
- if (rc)
- break;
- }
-
- rte_free(vnic_ids);
-
- return rc;
-}
-
int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, uint8_t *mac_addr)
{
struct hwrm_func_cfg_input req = {0};
@@ -2194,3 +2144,60 @@ int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf)
return rc;
}
+
+int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
+ void (*vnic_cb)(struct bnxt_vnic_info *,
+ void *), void *cbdata)
+{
+ struct hwrm_func_vf_vnic_ids_query_input req = {0};
+ struct hwrm_func_vf_vnic_ids_query_output *resp =
+ bp->hwrm_cmd_resp_addr;
+ struct bnxt_vnic_info vnic;
+ int rc;
+ uint32_t i, num_vnic_ids;
+ uint16_t *vnic_ids;
+ size_t vnic_id_sz;
+
+ /* First query all VNIC ids */
+
+ vnic_id_sz = bp->pf.total_vnics * sizeof(*vnic_ids);
+ vnic_ids = rte_malloc("bnxt_hwrm_vf_vnic_ids_query", vnic_id_sz,
+ RTE_CACHE_LINE_SIZE);
+ if (vnic_ids == NULL) {
+ rc = -ENOMEM;
+ return rc;
+ }
+ for (i = 0; i < vnic_id_sz; i += rte_eal_get_physmem_size())
+ rte_mem_lock_page(((char *)vnic_ids) + i);
+
+ HWRM_PREP(req, FUNC_VF_VNIC_IDS_QUERY, -1, resp_vf_vnic_ids);
+
+ req.vf_id = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
+ req.max_vnic_id_cnt = rte_cpu_to_le_32(bp->pf.total_vnics);
+ req.vnic_id_tbl_addr = rte_mem_virt2phy(vnic_ids);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ num_vnic_ids = rte_le_to_cpu_32(resp->vnic_id_cnt);
+
+ /* Retrieve VNIC, update bd_stall then update */
+
+ for (i = 0; i < num_vnic_ids; i++) {
+ memset(&vnic, 0, sizeof(struct bnxt_vnic_info));
+ vnic.fw_vnic_id = rte_le_to_cpu_16(vnic_ids[i]);
+ rc = bnxt_hwrm_vnic_qcfg(bp, &vnic, bp->pf.first_vf_id + vf);
+ if (rc)
+ break;
+
+ vnic_cb(&vnic, cbdata);
+
+ rc = bnxt_hwrm_vnic_cfg(bp, &vnic);
+ if (rc)
+ break;
+ }
+
+ rte_free(vnic_ids);
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 636ac13..b6c73ec 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -109,7 +109,6 @@ int bnxt_set_hwrm_link_config(struct bnxt *bp, bool link_up);
int bnxt_hwrm_func_qcfg(struct bnxt *bp);
int bnxt_hwrm_allocate_pf_only(struct bnxt *bp);
int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
-int bnxt_hwrm_func_vf_stall(struct bnxt *bp, uint16_t vf, uint8_t on);
int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, uint8_t *mac_addr);
int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan);
@@ -121,4 +120,7 @@ int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, uint16_t port,
uint8_t tunnel_type);
void bnxt_free_tunnel_ports(struct bnxt *bp);
int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf);
+int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
+ void (*vnic_cb)(struct bnxt_vnic_info *,
+ void *), void *cbdata);
#endif
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index d2a8532..afefe3a 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -78,6 +78,13 @@ int rte_pmd_bnxt_set_tx_loopback(uint8_t port, uint8_t on)
return rc;
}
+static void
+rte_pmd_bnxt_set_all_queues_drop_en_cb(struct bnxt_vnic_info *vnic, void *onptr)
+{
+ uint8_t *on = onptr;
+ vnic->bd_stall = !(*on);
+}
+
int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on)
{
struct rte_eth_dev *eth_dev;
@@ -114,7 +121,8 @@ int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on)
/* Stall all active VFs */
for (i = 0; i < bp->pf.active_vfs; i++) {
- rc = bnxt_hwrm_func_vf_stall(bp, i, !on);
+ rc = bnxt_hwrm_func_vf_vnic_cfg_do(bp, i,
+ rte_pmd_bnxt_set_all_queues_drop_en_cb, &on);
if (rc) {
RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", i);
break;
@@ -299,3 +307,42 @@ int rte_pmd_bnxt_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on)
return rc;
}
+static void
+rte_pmd_bnxt_set_vf_vlan_stripq_cb(struct bnxt_vnic_info *vnic, void *onptr)
+{
+ uint8_t *on = onptr;
+ vnic->vlan_strip = *on;
+}
+
+int
+rte_pmd_bnxt_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+ int rc;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to set VF %d stripq on non-PF port %d!\n",
+ vf, port);
+ return -ENOTSUP;
+ }
+
+ rc = bnxt_hwrm_func_vf_vnic_cfg_do(bp, vf,
+ rte_pmd_bnxt_set_vf_vlan_stripq_cb,
+ &on);
+ if (rc)
+ RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", vf);
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index 40e68ee..a17be1d 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -54,6 +54,26 @@ int rte_pmd_bnxt_set_vf_mac_addr(uint8_t port, uint16_t vf,
struct ether_addr *mac_addr);
/**
+ * Enable/Disable vf vlan strip for all queues in a pool
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param on
+ * 1 - Enable VF's vlan strip on RX queues.
+ * 0 - Disable VF's vlan strip on RX queues.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int
+rte_pmd_bnxt_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
* Response sent back to bnxt driver from user app after callback
*/
enum rte_pmd_bnxt_mb_event_rsp {
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index 955903b..f8effff 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -6,5 +6,6 @@ DPDK_17.05 {
rte_pmd_bnxt_set_vf_mac_addr;
rte_pmd_bnxt_set_vf_vlan_filter;
rte_pmd_bnxt_set_vf_mac_anti_spoof;
+ rte_pmd_bnxt_set_vf_vlan_stripq;
};
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 18/28] bnxt: support lack of huge pages
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (16 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 17/28] bnxt: implement VF VLAN stripq functionality Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 19/28] bnxt: add code to configure a default VF VLAN Ajit Khaparde
` (10 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
rte_malloc_virt2phy() does not return a physical address if huge pages
aren't in use. Further, rte_memzone->phys_addr is not a physical address.
Use rte_mem_virt2phy() and manually lock pages to support lack of
huge pages.
Also check the return value of rte_mem_virt2phy()
Verify the function returns an address. Otherwise return an error and
log a message.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_hwrm.c | 64 +++++++++++++++++++++++++++++++-------------
drivers/net/bnxt/bnxt_ring.c | 22 ++++++++++++---
drivers/net/bnxt/bnxt_vnic.c | 16 ++++++++++-
3 files changed, 78 insertions(+), 24 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index a840683..18ac2ad 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -477,8 +477,15 @@ int bnxt_hwrm_ver_get(struct bnxt *bp)
rc = -ENOMEM;
goto error;
}
+ rte_mem_lock_page(bp->hwrm_cmd_resp_addr);
bp->hwrm_cmd_resp_dma_addr =
- rte_malloc_virt2phy(bp->hwrm_cmd_resp_addr);
+ rte_mem_virt2phy(bp->hwrm_cmd_resp_addr);
+ if (bp->hwrm_cmd_resp_dma_addr == 0) {
+ RTE_LOG(ERR, PMD,
+ "Unable to map response buffer to physical memory.\n");
+ rc = -ENOMEM;
+ goto error;
+ }
bp->max_resp_len = max_resp_len;
}
@@ -1065,6 +1072,11 @@ int bnxt_hwrm_func_buf_rgtr(struct bnxt *bp)
req.req_buf_len = rte_cpu_to_le_16(HWRM_MAX_REQ_LEN);
req.req_buf_page_addr[0] =
rte_cpu_to_le_64(rte_malloc_virt2phy(bp->pf.vf_req_buf));
+ if (req.req_buf_page_addr[0] == 0) {
+ RTE_LOG(ERR, PMD,
+ "unable to map buffer address to physical memory\n");
+ return -ENOMEM;
+ }
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
@@ -1334,6 +1346,7 @@ int bnxt_alloc_all_hwrm_ring_grps(struct bnxt *bp)
void bnxt_free_hwrm_resources(struct bnxt *bp)
{
/* Release memzone */
+ /* TODO: unlock page?!?! */
rte_free(bp->hwrm_cmd_resp_addr);
bp->hwrm_cmd_resp_addr = NULL;
bp->hwrm_cmd_resp_dma_addr = 0;
@@ -1349,10 +1362,17 @@ int bnxt_alloc_hwrm_resources(struct bnxt *bp)
bp->max_req_len = HWRM_MAX_REQ_LEN;
bp->max_resp_len = HWRM_MAX_RESP_LEN;
bp->hwrm_cmd_resp_addr = rte_malloc(type, bp->max_resp_len, 0);
+ rte_mem_lock_page(bp->hwrm_cmd_resp_addr);
if (bp->hwrm_cmd_resp_addr == NULL)
return -ENOMEM;
+
bp->hwrm_cmd_resp_dma_addr =
- rte_malloc_virt2phy(bp->hwrm_cmd_resp_addr);
+ rte_mem_virt2phy(bp->hwrm_cmd_resp_addr);
+ if (bp->hwrm_cmd_resp_dma_addr == 0) {
+ RTE_LOG(ERR, PMD,
+ "unable to map response address to physical memory\n");
+ return -ENOMEM;
+ }
rte_spinlock_init(&bp->hwrm_lock);
return 0;
@@ -1935,7 +1955,9 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
struct hwrm_func_cfg_input req = {0};
struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
int i;
+ unsigned int ui;
int rc = 0;
+ size_t req_buf_sz;
if (!BNXT_PF(bp)) {
RTE_LOG(ERR, PMD, "Attempt to allcoate VFs on a VF!\n");
@@ -1967,14 +1989,18 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
/*
* Now, create and register a buffer to hold forwarded VF requests
*/
- bp->pf.vf_req_buf = rte_malloc("bnxt_vf_fwd",
- num_vfs * HWRM_MAX_REQ_LEN,
+ req_buf_sz = num_vfs * HWRM_MAX_REQ_LEN;
+ bp->pf.vf_req_buf = rte_malloc("bnxt_vf_fwd", req_buf_sz,
page_roundup(num_vfs *
HWRM_MAX_REQ_LEN));
if (bp->pf.vf_req_buf == NULL) {
rc = -ENOMEM;
goto error_free;
}
+
+ for (ui = 0; ui < req_buf_sz; ui += rte_eal_get_physmem_size())
+ rte_mem_lock_page(((char *)bp->pf.vf_req_buf) + ui);
+
for (i = 0; i < num_vfs; i++)
bp->pf.vf_info[i].req_buf =
((char *)bp->pf.vf_req_buf) + (i * HWRM_MAX_REQ_LEN);
@@ -2130,21 +2156,6 @@ int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan)
return rc;
}
-int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf)
-{
- struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
- struct hwrm_func_cfg_input req = {0};
- int rc;
-
- HWRM_PREP(req, FUNC_CFG, -1, resp);
- req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
- req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
- rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
- HWRM_CHECK_RESULT;
-
- return rc;
-}
-
int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
void (*vnic_cb)(struct bnxt_vnic_info *,
void *), void *cbdata)
@@ -2201,3 +2212,18 @@ int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
return rc;
}
+
+int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf)
+{
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ struct hwrm_func_cfg_input req = {0};
+ int rc;
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
+ req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
index 389bef2..cace73b 100644
--- a/drivers/net/bnxt/bnxt_ring.c
+++ b/drivers/net/bnxt/bnxt_ring.c
@@ -96,6 +96,7 @@ int bnxt_alloc_rings(struct bnxt *bp, uint16_t qidx,
struct rte_pci_device *pdev = bp->pdev;
const struct rte_memzone *mz = NULL;
char mz_name[RTE_MEMZONE_NAMESIZE];
+ phys_addr_t mz_phys_addr;
int stats_len = (tx_ring_info || rx_ring_info) ?
RTE_CACHE_LINE_ROUNDUP(sizeof(struct ctx_hw_stats64)) : 0;
@@ -144,13 +145,26 @@ int bnxt_alloc_rings(struct bnxt *bp, uint16_t qidx,
return -ENOMEM;
}
memset(mz->addr, 0, mz->len);
+ mz_phys_addr = mz->phys_addr;
+ if ((phys_addr_t)mz->addr == mz_phys_addr) {
+ RTE_LOG(WARNING, PMD,
+ "Memzone physical address same as virtual.\n");
+ RTE_LOG(WARNING, PMD,
+ "Using rte_mem_virt2phy()\n");
+ mz_phys_addr = rte_mem_virt2phy(mz->addr);
+ if (mz_phys_addr == 0) {
+ RTE_LOG(ERR, PMD,
+ "unable to map ring address to physical memory\n");
+ return -ENOMEM;
+ }
+ }
if (tx_ring_info) {
tx_ring = tx_ring_info->tx_ring_struct;
tx_ring->bd = ((char *)mz->addr + tx_ring_start);
tx_ring_info->tx_desc_ring = (struct tx_bd_long *)tx_ring->bd;
- tx_ring->bd_dma = mz->phys_addr + tx_ring_start;
+ tx_ring->bd_dma = mz_phys_addr + tx_ring_start;
tx_ring_info->tx_desc_mapping = tx_ring->bd_dma;
tx_ring->mem_zone = (const void *)mz;
@@ -170,7 +184,7 @@ int bnxt_alloc_rings(struct bnxt *bp, uint16_t qidx,
rx_ring->bd = ((char *)mz->addr + rx_ring_start);
rx_ring_info->rx_desc_ring =
(struct rx_prod_pkt_bd *)rx_ring->bd;
- rx_ring->bd_dma = mz->phys_addr + rx_ring_start;
+ rx_ring->bd_dma = mz_phys_addr + rx_ring_start;
rx_ring_info->rx_desc_mapping = rx_ring->bd_dma;
rx_ring->mem_zone = (const void *)mz;
@@ -185,7 +199,7 @@ int bnxt_alloc_rings(struct bnxt *bp, uint16_t qidx,
}
cp_ring->bd = ((char *)mz->addr + cp_ring_start);
- cp_ring->bd_dma = mz->phys_addr + cp_ring_start;
+ cp_ring->bd_dma = mz_phys_addr + cp_ring_start;
cp_ring_info->cp_desc_ring = cp_ring->bd;
cp_ring_info->cp_desc_mapping = cp_ring->bd_dma;
cp_ring->mem_zone = (const void *)mz;
@@ -196,7 +210,7 @@ int bnxt_alloc_rings(struct bnxt *bp, uint16_t qidx,
*cp_ring->vmem = ((char *)mz->addr + stats_len);
if (stats_len) {
cp_ring_info->hw_stats = mz->addr;
- cp_ring_info->hw_stats_map = mz->phys_addr;
+ cp_ring_info->hw_stats_map = mz_phys_addr;
}
cp_ring_info->hw_stats_ctx_id = HWRM_NA_SIGNATURE;
return 0;
diff --git a/drivers/net/bnxt/bnxt_vnic.c b/drivers/net/bnxt/bnxt_vnic.c
index 139e4bf..dfbaedb 100644
--- a/drivers/net/bnxt/bnxt_vnic.c
+++ b/drivers/net/bnxt/bnxt_vnic.c
@@ -172,6 +172,7 @@ int bnxt_alloc_vnic_attributes(struct bnxt *bp)
HW_HASH_KEY_SIZE);
uint16_t max_vnics;
int i;
+ phys_addr_t mz_phys_addr;
max_vnics = bp->max_vnics;
snprintf(mz_name, RTE_MEMZONE_NAMESIZE,
@@ -188,6 +189,19 @@ int bnxt_alloc_vnic_attributes(struct bnxt *bp)
if (!mz)
return -ENOMEM;
}
+ mz_phys_addr = mz->phys_addr;
+ if ((phys_addr_t)mz->addr == mz_phys_addr) {
+ RTE_LOG(WARNING, PMD,
+ "Memzone physical address same as virtual.\n");
+ RTE_LOG(WARNING, PMD,
+ "Using rte_mem_virt2phy()\n");
+ mz_phys_addr = rte_mem_virt2phy(mz->addr);
+ if (mz_phys_addr == 0) {
+ RTE_LOG(ERR, PMD,
+ "unable to map vnic address to physical memory\n");
+ return -ENOMEM;
+ }
+ }
for (i = 0; i < max_vnics; i++) {
vnic = &bp->vnic_info[i];
@@ -197,7 +211,7 @@ int bnxt_alloc_vnic_attributes(struct bnxt *bp)
(void *)((char *)mz->addr + (entry_length * i));
memset(vnic->rss_table, -1, entry_length);
- vnic->rss_table_dma_addr = mz->phys_addr + (entry_length * i);
+ vnic->rss_table_dma_addr = mz_phys_addr + (entry_length * i);
vnic->rss_hash_key = (void *)((char *)vnic->rss_table +
HW_HASH_INDEX_SIZE * sizeof(*vnic->rss_table));
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 19/28] bnxt: add code to configure a default VF VLAN
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (17 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 18/28] bnxt: support lack of huge pages Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 20/28] bnxt: Add support to set VF rxmode Ajit Khaparde
` (9 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
This patch adds code to insert a default VF VLAN.
Also track the current default VLAN per vnic for the VF.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt.h | 1 +
drivers/net/bnxt/bnxt_hwrm.c | 4 ++--
drivers/net/bnxt/bnxt_hwrm.h | 2 +-
drivers/net/bnxt/rte_pmd_bnxt.c | 33 ++++++++++++++++++++++++++++++-
drivers/net/bnxt/rte_pmd_bnxt.h | 20 +++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 1 +
6 files changed, 57 insertions(+), 4 deletions(-)
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 9a23b1a..514e9e6 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -58,6 +58,7 @@ struct bnxt_child_vf_info {
uint16_t fid;
uint16_t max_tx_rate;
uint32_t func_cfg_flags;
+ uint16_t dflt_vlan;
void *req_buf;
uint8_t mac_spoof_en;
};
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 18ac2ad..3e8eeda 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2138,7 +2138,7 @@ int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
return rc;
}
-int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan)
+int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf)
{
struct hwrm_func_cfg_input req = {0};
struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
@@ -2148,7 +2148,7 @@ int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan)
req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
req.enables |= rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN);
- req.dflt_vlan = rte_cpu_to_le_16(vlan);
+ req.dflt_vlan = rte_cpu_to_le_16(bp->pf.vf_info[vf].dflt_vlan);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
HWRM_CHECK_RESULT;
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index b6c73ec..21f05f2 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -111,7 +111,6 @@ int bnxt_hwrm_allocate_pf_only(struct bnxt *bp);
int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, uint8_t *mac_addr);
int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
-int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf, uint16_t vlan);
int bnxt_hwrm_func_bw_cfg(struct bnxt *bp, uint16_t vf,
uint16_t max_bw, uint16_t enables);
int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
@@ -119,6 +118,7 @@ int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, uint16_t port,
uint8_t tunnel_type);
void bnxt_free_tunnel_ports(struct bnxt *bp);
+int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf);
int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf);
int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
void (*vnic_cb)(struct bnxt_vnic_info *,
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index afefe3a..e3d159c 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -247,7 +247,8 @@ int rte_pmd_bnxt_set_vf_vlan_filter(uint8_t port, uint16_t vlan,
for (i = 0; vf_mask; i++, vf_mask >>= 1) {
if (vf_mask & 1) {
- ret = bnxt_hwrm_set_vf_vlan(bp, i, vlan_on ? vlan : 0);
+ bp->pf.vf_info[i].dflt_vlan = vlan_on ? vlan : 0;
+ ret = bnxt_hwrm_set_vf_vlan(bp, i);
if (ret)
rc = ret;
}
@@ -346,3 +347,33 @@ rte_pmd_bnxt_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on)
return rc;
}
+
+int
+rte_pmd_bnxt_set_vf_vlan_insert(uint8_t port, uint16_t vf,
+ uint16_t vlan_id)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to set VF %d vlan insert on non-PF port %d\n",
+ vf, port);
+ return -ENOTSUP;
+ }
+
+ if (vlan_id != bp->pf.vf_info[vf].dflt_vlan)
+ return -ENOTSUP;
+
+ return 0;
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index a17be1d..32924e1 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -74,6 +74,26 @@ int
rte_pmd_bnxt_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
/**
+ * Enable/Disable vf vlan insert
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param vlan_id
+ * 0 - Disable VF's vlan insert.
+ * n - Enable; n is inserted as the vlan id.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int
+rte_pmd_bnxt_set_vf_vlan_insert(uint8_t port, uint16_t vf,
+ uint16_t vlan_id);
+
+/**
* Response sent back to bnxt driver from user app after callback
*/
enum rte_pmd_bnxt_mb_event_rsp {
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index f8effff..1b1effb 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -7,5 +7,6 @@ DPDK_17.05 {
rte_pmd_bnxt_set_vf_vlan_filter;
rte_pmd_bnxt_set_vf_mac_anti_spoof;
rte_pmd_bnxt_set_vf_vlan_stripq;
+ rte_pmd_bnxt_set_vf_vlan_insert;
};
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 20/28] bnxt: Add support to set VF rxmode
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (18 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 19/28] bnxt: add code to configure a default VF VLAN Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 21/28] bnxt: Add VF stats get/reset functions Ajit Khaparde
` (8 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
This patch adds support to configure the VF L2 Rx settings.
It also adds code in testpmd to call the appropriate bnxt PMD function
when this setting needs to be configured in the hardware.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
app/test-pmd/cmdline.c | 8 ++++
drivers/net/bnxt/bnxt.h | 1 +
drivers/net/bnxt/bnxt_hwrm.c | 65 ++++++++++++++++++++-----------
drivers/net/bnxt/bnxt_hwrm.h | 7 ++--
drivers/net/bnxt/bnxt_rxq.c | 3 ++
drivers/net/bnxt/bnxt_vnic.h | 5 +++
drivers/net/bnxt/rte_pmd_bnxt.c | 62 ++++++++++++++++++++++++++---
drivers/net/bnxt/rte_pmd_bnxt.h | 20 ++++++++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 1 +
9 files changed, 141 insertions(+), 31 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 9bdbf4c..9796686 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -6744,7 +6744,9 @@ cmdline_parse_inst_t cmd_set_vf_traffic = {
NULL,
},
};
+#endif
+#if defined(RTE_LIBRTE_IXGBE_PMD) || defined(RTE_LIBRTE_BNXT_PMD)
/* *** CONFIGURE VF RECEIVE MODE *** */
struct cmd_set_vf_rxmode {
cmdline_fixed_string_t set;
@@ -6778,7 +6780,13 @@ cmd_set_vf_rxmode_parsed(void *parsed_result,
rx_mode |= ETH_VMDQ_ACCEPT_MULTICAST;
}
+#ifdef RTE_LIBRTE_BNXT_PMD
+ ret = rte_pmd_bnxt_set_vf_rxmode(res->port_id, res->vf_id, rx_mode,
+ (uint8_t)is_on);
+#endif
+#ifdef RTE_LIBRTE_IXGBE_PMD
ret = rte_pmd_ixgbe_set_vf_rxmode(res->port_id, res->vf_id, rx_mode, (uint8_t)is_on);
+#endif
if (ret < 0)
printf("bad VF receive mode parameter, return code = %d \n",
ret);
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 514e9e6..50b3d02 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -58,6 +58,7 @@ struct bnxt_child_vf_info {
uint16_t fid;
uint16_t max_tx_rate;
uint32_t func_cfg_flags;
+ uint32_t l2_rx_mask;
uint16_t dflt_vlan;
void *req_buf;
uint8_t mac_spoof_en;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 3e8eeda..41e3e50 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -215,12 +215,19 @@ int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic)
/* FIXME add multicast flag, when multicast adding options is supported
* by ethtool.
*/
+ if (vnic->flags & BNXT_VNIC_INFO_BCAST)
+ mask = HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST;
+
if (vnic->flags & BNXT_VNIC_INFO_PROMISC)
- mask = HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS;
+ mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS;
+ if (vnic->flags & BNXT_VNIC_INFO_UNTAGGED)
+ mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN;
if (vnic->flags & BNXT_VNIC_INFO_ALLMULTI)
- mask = HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST;
- req.mask = rte_cpu_to_le_32(HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST |
- mask);
+ mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST;
+ if (vnic->flags & BNXT_VNIC_INFO_MCAST)
+ mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST;
+
+ req.mask = rte_cpu_to_le_32(mask);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
@@ -2156,9 +2163,36 @@ int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf)
return rc;
}
-int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
- void (*vnic_cb)(struct bnxt_vnic_info *,
- void *), void *cbdata)
+int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf)
+{
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ struct hwrm_func_cfg_input req = {0};
+ int rc;
+
+ HWRM_PREP(req, FUNC_CFG, -1, resp);
+ req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
+ req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
+void vf_vnic_set_rxmask_cb(struct bnxt_vnic_info *vnic, void *flagp)
+{
+ uint32_t *flag = flagp;
+
+ vnic->flags = *flag;
+}
+
+/*
+ * This function queries the VNIC IDs for a specified VF. It then calls
+ * the vnic_cb to update the necessary field in vnic_info with cbdata.
+ * Then it calls the hwrm_cb function to program this new vnic configuration.
+ */
+int bnxt_hwrm_func_vf_vnic_query_and_config(struct bnxt *bp, uint16_t vf,
+ void (*vnic_cb)(struct bnxt_vnic_info *, void *), void *cbdata,
+ int (*hwrm_cb)(struct bnxt *bp, struct bnxt_vnic_info *vnic))
{
struct hwrm_func_vf_vnic_ids_query_input req = {0};
struct hwrm_func_vf_vnic_ids_query_output *resp =
@@ -2203,7 +2237,7 @@ int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
vnic_cb(&vnic, cbdata);
- rc = bnxt_hwrm_vnic_cfg(bp, &vnic);
+ rc = hwrm_cb(bp, &vnic);
if (rc)
break;
}
@@ -2212,18 +2246,3 @@ int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
return rc;
}
-
-int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf)
-{
- struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
- struct hwrm_func_cfg_input req = {0};
- int rc;
-
- HWRM_PREP(req, FUNC_CFG, -1, resp);
- req.fid = rte_cpu_to_le_16(bp->pf.vf_info[vf].fid);
- req.flags = rte_cpu_to_le_32(bp->pf.vf_info[vf].func_cfg_flags);
- rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
- HWRM_CHECK_RESULT;
-
- return rc;
-}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 21f05f2..5e73136 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -120,7 +120,8 @@ int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, uint16_t port,
void bnxt_free_tunnel_ports(struct bnxt *bp);
int bnxt_hwrm_set_vf_vlan(struct bnxt *bp, int vf);
int bnxt_hwrm_func_cfg_vf_set_flags(struct bnxt *bp, uint16_t vf);
-int bnxt_hwrm_func_vf_vnic_cfg_do(struct bnxt *bp, uint16_t vf,
- void (*vnic_cb)(struct bnxt_vnic_info *,
- void *), void *cbdata);
+void vf_vnic_set_rxmask_cb(struct bnxt_vnic_info *vnic, void *flagp);
+int bnxt_hwrm_func_vf_vnic_query_and_config(struct bnxt *bp, uint16_t vf,
+ void (*vnic_cb)(struct bnxt_vnic_info *, void *), void *cbdata,
+ int (*hwrm_cb)(struct bnxt *bp, struct bnxt_vnic_info *vnic));
#endif
diff --git a/drivers/net/bnxt/bnxt_rxq.c b/drivers/net/bnxt/bnxt_rxq.c
index 6f72a1b..f710aed 100644
--- a/drivers/net/bnxt/bnxt_rxq.c
+++ b/drivers/net/bnxt/bnxt_rxq.c
@@ -76,6 +76,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp)
rc = -ENOMEM;
goto err_out;
}
+ vnic->flags |= BNXT_VNIC_INFO_BCAST;
STAILQ_INSERT_TAIL(&bp->ff_pool[0], vnic, next);
bp->nr_vnics++;
@@ -140,6 +141,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp)
rc = -ENOMEM;
goto err_out;
}
+ vnic->flags |= BNXT_VNIC_INFO_BCAST;
STAILQ_INSERT_TAIL(&bp->ff_pool[i], vnic, next);
bp->nr_vnics++;
@@ -180,6 +182,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp)
rc = -ENOMEM;
goto err_out;
}
+ vnic->flags |= BNXT_VNIC_INFO_BCAST;
/* Partition the rx queues for the single pool */
for (i = 0; i < bp->rx_cp_nr_rings; i++) {
rxq = bp->eth_dev->data->rx_queues[i];
diff --git a/drivers/net/bnxt/bnxt_vnic.h b/drivers/net/bnxt/bnxt_vnic.h
index 6f099a9..5695240 100644
--- a/drivers/net/bnxt/bnxt_vnic.h
+++ b/drivers/net/bnxt/bnxt_vnic.h
@@ -61,6 +61,11 @@ struct bnxt_vnic_info {
uint32_t flags;
#define BNXT_VNIC_INFO_PROMISC (1 << 0)
#define BNXT_VNIC_INFO_ALLMULTI (1 << 1)
+#define BNXT_VNIC_INFO_BCAST (1 << 2)
+#define BNXT_VNIC_INFO_UCAST (1 << 3)
+#define BNXT_VNIC_INFO_MCAST (1 << 4)
+#define BNXT_VNIC_INFO_TAGGED (1 << 5)
+#define BNXT_VNIC_INFO_UNTAGGED (1 << 6)
bool vlan_strip;
bool func_default;
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index e3d159c..370d865 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -121,8 +121,9 @@ int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on)
/* Stall all active VFs */
for (i = 0; i < bp->pf.active_vfs; i++) {
- rc = bnxt_hwrm_func_vf_vnic_cfg_do(bp, i,
- rte_pmd_bnxt_set_all_queues_drop_en_cb, &on);
+ rc = bnxt_hwrm_func_vf_vnic_query_and_config(bp, i,
+ rte_pmd_bnxt_set_all_queues_drop_en_cb, &on,
+ bnxt_hwrm_vnic_cfg);
if (rc) {
RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", i);
break;
@@ -339,9 +340,9 @@ rte_pmd_bnxt_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on)
return -ENOTSUP;
}
- rc = bnxt_hwrm_func_vf_vnic_cfg_do(bp, vf,
- rte_pmd_bnxt_set_vf_vlan_stripq_cb,
- &on);
+ rc = bnxt_hwrm_func_vf_vnic_query_and_config(bp, vf,
+ rte_pmd_bnxt_set_vf_vlan_stripq_cb, &on,
+ bnxt_hwrm_vnic_cfg);
if (rc)
RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", vf);
@@ -377,3 +378,54 @@ rte_pmd_bnxt_set_vf_vlan_insert(uint8_t port, uint16_t vf,
return 0;
}
+
+int rte_pmd_bnxt_set_vf_rxmode(uint8_t port, uint16_t vf,
+ uint16_t rx_mask, uint8_t on)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ uint16_t flag = 0;
+ struct bnxt *bp;
+ int rc;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (!bp->pf.vf_info)
+ return -EINVAL;
+
+ if (vf >= bp->pdev->max_vfs)
+ return -EINVAL;
+
+ if (rx_mask & (ETH_VMDQ_ACCEPT_UNTAG | ETH_VMDQ_ACCEPT_HASH_MC)) {
+ RTE_LOG(ERR, PMD, "Currently cannot toggle this setting\n");
+ return -ENOTSUP;
+ }
+
+ if (rx_mask & ETH_VMDQ_ACCEPT_HASH_UC && !on) {
+ RTE_LOG(ERR, PMD, "Currently cannot disable UC Rx\n");
+ return -ENOTSUP;
+ }
+
+ if (rx_mask & ETH_VMDQ_ACCEPT_BROADCAST)
+ flag |= BNXT_VNIC_INFO_BCAST;
+ if (rx_mask & ETH_VMDQ_ACCEPT_MULTICAST)
+ flag |= BNXT_VNIC_INFO_ALLMULTI;
+
+ if (on)
+ bp->pf.vf_info[vf].l2_rx_mask |= flag;
+ else
+ bp->pf.vf_info[vf].l2_rx_mask &= ~flag;
+
+ rc = bnxt_hwrm_func_vf_vnic_query_and_config(bp, vf,
+ vf_vnic_set_rxmask_cb,
+ &bp->pf.vf_info[vf].l2_rx_mask,
+ bnxt_hwrm_cfa_l2_set_rx_mask);
+ if (rc)
+ RTE_LOG(ERR, PMD, "bnxt_hwrm_func_vf_vnic_set_rxmask failed\n");
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index 32924e1..e509c62 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -209,4 +209,24 @@ int rte_pmd_bnxt_set_vf_vlan_filter(uint8_t port, uint16_t vlan,
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_bnxt_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Set RX L2 Filtering mode of a VF of an Ethernet device.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param rx_mask
+ * The RX mode mask
+ * @param on
+ * 1 - Enable a VF RX mode.
+ * 0 - Disable a VF RX mode.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_vf_rxmode(uint8_t port, uint16_t vf,
+ uint16_t rx_mask, uint8_t on);
#endif /* _PMD_BNXT_H_ */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index 1b1effb..af6300a 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -8,5 +8,6 @@ DPDK_17.05 {
rte_pmd_bnxt_set_vf_mac_anti_spoof;
rte_pmd_bnxt_set_vf_vlan_stripq;
rte_pmd_bnxt_set_vf_vlan_insert;
+ rte_pmd_bnxt_set_vf_rxmode;
};
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 21/28] bnxt: Add VF stats get/reset functions
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (19 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 20/28] bnxt: Add support to set VF rxmode Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 22/28] bnxt: Add newlines to all RTE_LOG() format strings Ajit Khaparde
` (7 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
This patch adds functions to get/reset VF stats.
It also adds the HWRM API needed to support this.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_hwrm.c | 55 ++++++++
drivers/net/bnxt/bnxt_hwrm.h | 3 +
drivers/net/bnxt/hsi_struct_def_dpdk.h | 219 ++++++++++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.c | 49 +++++++
drivers/net/bnxt/rte_pmd_bnxt.h | 33 +++++
drivers/net/bnxt/rte_pmd_bnxt_version.map | 2 +
6 files changed, 361 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 41e3e50..47f264b 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -1151,6 +1151,61 @@ int bnxt_hwrm_exec_fwd_resp(struct bnxt *bp, uint16_t target_id,
return rc;
}
+int bnxt_hwrm_func_qstats(struct bnxt *bp, uint16_t fid,
+ struct rte_eth_stats *stats)
+{
+ int rc = 0;
+ struct hwrm_func_qstats_input req = {.req_type = 0};
+ struct hwrm_func_qstats_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_QSTATS, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(fid);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ memset(stats, 0, sizeof(*stats));
+
+ stats->ipackets = rte_le_to_cpu_64(resp->rx_ucast_pkts);
+ stats->ipackets += rte_le_to_cpu_64(resp->rx_mcast_pkts);
+ stats->ipackets += rte_le_to_cpu_64(resp->rx_bcast_pkts);
+ stats->ibytes = rte_le_to_cpu_64(resp->rx_ucast_bytes);
+ stats->ibytes += rte_le_to_cpu_64(resp->rx_mcast_bytes);
+ stats->ibytes += rte_le_to_cpu_64(resp->rx_bcast_bytes);
+
+ stats->opackets = rte_le_to_cpu_64(resp->tx_ucast_pkts);
+ stats->opackets += rte_le_to_cpu_64(resp->tx_mcast_pkts);
+ stats->opackets += rte_le_to_cpu_64(resp->tx_bcast_pkts);
+ stats->obytes = rte_le_to_cpu_64(resp->tx_ucast_bytes);
+ stats->obytes += rte_le_to_cpu_64(resp->tx_mcast_bytes);
+ stats->obytes += rte_le_to_cpu_64(resp->tx_bcast_bytes);
+
+ stats->ierrors = rte_le_to_cpu_64(resp->rx_err_pkts);
+ stats->oerrors = rte_le_to_cpu_64(resp->tx_err_pkts);
+ stats->rx_nombuf = rte_le_to_cpu_64(resp->rx_drop_pkts);
+
+ return rc;
+}
+
+int bnxt_hwrm_func_clr_stats(struct bnxt *bp, uint16_t fid)
+{
+ int rc = 0;
+ struct hwrm_func_clr_stats_input req = {.req_type = 0};
+ struct hwrm_func_clr_stats_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_CLR_STATS, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(fid);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
/*
* HWRM utility functions
*/
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 5e73136..33c246c 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -63,6 +63,9 @@ int bnxt_hwrm_func_driver_register(struct bnxt *bp);
int bnxt_hwrm_func_qcaps(struct bnxt *bp);
int bnxt_hwrm_func_reset(struct bnxt *bp);
int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags);
+int bnxt_hwrm_func_qstats(struct bnxt *bp, uint16_t fid,
+ struct rte_eth_stats *stats);
+int bnxt_hwrm_func_clr_stats(struct bnxt *bp, uint16_t fid);
int bnxt_hwrm_queue_qportcfg(struct bnxt *bp);
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index c2ca6f5..31b8557 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -90,6 +90,8 @@ struct ctx_hw_stats64 {
#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
#define HWRM_FUNC_QCFG (UINT32_C(0x16))
#define HWRM_FUNC_CFG (UINT32_C(0x17))
+#define HWRM_FUNC_QSTATS (UINT32_C(0x18))
+#define HWRM_FUNC_CLR_STATS (UINT32_C(0x19))
#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
#define HWRM_FUNC_VF_VNIC_IDS_QUERY (UINT32_C(0x1c))
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
@@ -2809,6 +2811,223 @@ struct hwrm_func_cfg_output {
*/
} __attribute__((packed));
+/* hwrm_func_qstats */
+/*
+ * Description: This command returns statistics of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The HWRM shall return any unsupported counter with a value
+ * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being queried. 0xFF...
+ * (All Fs) if the query is for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (176 bytes) */
+struct hwrm_func_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets on the function. */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets on the function. */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets on the function. */
+ uint64_t tx_err_pkts;
+ /*
+ * Number of transmitted packets that were discarded due to
+ * internal NIC resource problems. For transmit, this can only
+ * happen if TMP is configured to allow dropping in HOL blocking
+ * conditions, which is not a normal configuration.
+ */
+ uint64_t tx_drop_pkts;
+ /*
+ * Number of dropped packets on transmit path on the function.
+ * These are packets that have been marked for drop by the TE
+ * CFA block or are packets that exceeded the transmit MTU limit
+ * for the function.
+ */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic on the function. */
+ uint64_t tx_mcast_bytes;
+ /*
+ * Number of transmitted bytes for multicast traffic on the
+ * function.
+ */
+ uint64_t tx_bcast_bytes;
+ /*
+ * Number of transmitted bytes for broadcast traffic on the
+ * function.
+ */
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets on the function. */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets on the function. */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets on the function. */
+ uint64_t rx_err_pkts;
+ /*
+ * Number of received packets that were discarded on the
+ * function due to resource limitations. This can happen for 3
+ * reasons. # The BD used for the packet has a bad format. #
+ * There were no BDs available in the ring for the packet. #
+ * There were no BDs available on-chip for the packet.
+ */
+ uint64_t rx_drop_pkts;
+ /*
+ * Number of dropped packets on received path on the function.
+ * These are packets that have been marked for drop by the RE
+ * CFA.
+ */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic on the function. */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic on the function. */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic on the function. */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets on the function. */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes on the function. */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events on the function. */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations on the function. */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_clr_stats */
+/*
+ * Description: This command clears statistics of a function. The input FID
+ * value is used to indicate what function's statistics is being cleared. This
+ * allows a physical function driver to clear statistics of virtual functions
+ * that are children of the physical function.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function. 0xFF... (All Fs) if the query is
+ * for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_drv_rgtr */
/*
* Description: This command is used by the function driver to register its
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index 370d865..d59c38b 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -429,3 +429,52 @@ int rte_pmd_bnxt_set_vf_rxmode(uint8_t port, uint16_t vf,
return rc;
}
+
+int rte_pmd_bnxt_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to get VF %d stats on non-PF port %d!\n",
+ vf_id, port);
+ return -ENOTSUP;
+ }
+
+ return bnxt_hwrm_func_qstats(bp, bp->pf.first_vf_id + vf_id, stats);
+}
+
+int rte_pmd_bnxt_reset_vf_stats(uint8_t port,
+ uint16_t vf_id)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to reset VF %d stats on non-PF port %d!\n",
+ vf_id, port);
+ return -ENOTSUP;
+ }
+
+ return bnxt_hwrm_func_clr_stats(bp, bp->pf.first_vf_id + vf_id);
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index e509c62..d78b575 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -229,4 +229,37 @@ int rte_pmd_bnxt_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
*/
int rte_pmd_bnxt_set_vf_rxmode(uint8_t port, uint16_t vf,
uint16_t rx_mask, uint8_t on);
+
+/**
+ * Get VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters supported statistics:
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_bnxt_get_vf_stats(uint8_t port, uint16_t vf_id,
+ struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_reset_vf_stats(uint8_t port, uint16_t vf_id);
#endif /* _PMD_BNXT_H_ */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index af6300a..1fd271b 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -9,5 +9,7 @@ DPDK_17.05 {
rte_pmd_bnxt_set_vf_vlan_stripq;
rte_pmd_bnxt_set_vf_vlan_insert;
rte_pmd_bnxt_set_vf_rxmode;
+ rte_pmd_bnxt_get_vf_stats;
+ rte_pmd_bnxt_reset_vf_stats;
};
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 22/28] bnxt: Add newlines to all RTE_LOG() format strings
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (20 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 21/28] bnxt: Add VF stats get/reset functions Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 23/28] bnxt: Add support for VLAN filter and strip dev_ops Ajit Khaparde
` (6 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev; +Cc: Stephen Hurd
Add newline to the RTE_LOG() messages for better readability.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 10 +++++-----
drivers/net/bnxt/bnxt_filter.c | 2 +-
drivers/net/bnxt/bnxt_irq.c | 2 +-
drivers/net/bnxt/bnxt_ring.c | 2 +-
drivers/net/bnxt/bnxt_rxq.c | 7 ++++---
drivers/net/bnxt/bnxt_vnic.c | 2 +-
6 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 7bbda68..ee13ed6 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -881,7 +881,7 @@ static int bnxt_rss_hash_conf_get_op(struct rte_eth_dev *eth_dev,
}
if (hash_types) {
RTE_LOG(ERR, PMD,
- "Unknwon RSS config from firmware (%08x), RSS disabled",
+ "Unknwon RSS config from firmware (%08x), RSS disabled\n",
vnic->hash_type);
return -ENOTSUP;
}
@@ -1071,7 +1071,7 @@ bnxt_udp_tunnel_port_del_op(struct rte_eth_dev *eth_dev,
port = bp->geneve_fw_dst_port_id;
break;
default:
- RTE_LOG(ERR, PMD, "Tunnel type is not supported");
+ RTE_LOG(ERR, PMD, "Tunnel type is not supported\n");
return -ENOTSUP;
}
@@ -1181,7 +1181,7 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
int rc;
if (version_printed++ == 0)
- RTE_LOG(INFO, PMD, "%s", bnxt_version);
+ RTE_LOG(INFO, PMD, "%s\n", bnxt_version);
rte_eth_copy_pci_info(eth_dev, pci_dev);
eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
@@ -1231,7 +1231,7 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
ETHER_ADDR_LEN * MAX_NUM_MAC_ADDR, 0);
if (eth_dev->data->mac_addrs == NULL) {
RTE_LOG(ERR, PMD,
- "Failed to alloc %u bytes needed to store MAC addr tbl",
+ "Failed to alloc %u bytes needed to store MAC addr tbl\n",
ETHER_ADDR_LEN * MAX_NUM_MAC_ADDR);
rc = -ENOMEM;
goto error_free;
@@ -1275,7 +1275,7 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
rc = bnxt_hwrm_func_driver_register(bp);
if (rc) {
RTE_LOG(ERR, PMD,
- "Failed to register driver");
+ "Failed to register driver\n");
rc = -EBUSY;
goto error_free;
}
diff --git a/drivers/net/bnxt/bnxt_filter.c b/drivers/net/bnxt/bnxt_filter.c
index 137c7b7..efadc0c 100644
--- a/drivers/net/bnxt/bnxt_filter.c
+++ b/drivers/net/bnxt/bnxt_filter.c
@@ -145,7 +145,7 @@ int bnxt_alloc_filter_mem(struct bnxt *bp)
max_filters * sizeof(struct bnxt_filter_info),
0);
if (filter_mem == NULL) {
- RTE_LOG(ERR, PMD, "Failed to alloc memory for %d filters",
+ RTE_LOG(ERR, PMD, "Failed to alloc memory for %d filters\n",
max_filters);
return -ENOMEM;
}
diff --git a/drivers/net/bnxt/bnxt_irq.c b/drivers/net/bnxt/bnxt_irq.c
index 880af95..ea09582 100644
--- a/drivers/net/bnxt/bnxt_irq.c
+++ b/drivers/net/bnxt/bnxt_irq.c
@@ -141,7 +141,7 @@ int bnxt_setup_int(struct bnxt *bp)
return 0;
setup_exit:
- RTE_LOG(ERR, PMD, "bnxt_irq_tbl setup failed");
+ RTE_LOG(ERR, PMD, "bnxt_irq_tbl setup failed\n");
return rc;
}
diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
index cace73b..bd7b4b6 100644
--- a/drivers/net/bnxt/bnxt_ring.c
+++ b/drivers/net/bnxt/bnxt_ring.c
@@ -258,7 +258,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
bp->grp_info[idx].rx_fw_ring_id = ring->fw_ring_id;
B_RX_DB(rxr->rx_doorbell, rxr->rx_prod);
if (bnxt_init_one_rx_ring(rxq)) {
- RTE_LOG(ERR, PMD, "bnxt_init_one_rx_ring failed!");
+ RTE_LOG(ERR, PMD, "bnxt_init_one_rx_ring failed!\n");
bnxt_rx_queue_release_op(rxq);
return -ENOMEM;
}
diff --git a/drivers/net/bnxt/bnxt_rxq.c b/drivers/net/bnxt/bnxt_rxq.c
index f710aed..9862d18 100644
--- a/drivers/net/bnxt/bnxt_rxq.c
+++ b/drivers/net/bnxt/bnxt_rxq.c
@@ -278,7 +278,7 @@ int bnxt_rx_queue_setup_op(struct rte_eth_dev *eth_dev,
int rc = 0;
if (!nb_desc || nb_desc > MAX_RX_DESC_CNT) {
- RTE_LOG(ERR, PMD, "nb_desc %d is invalid", nb_desc);
+ RTE_LOG(ERR, PMD, "nb_desc %d is invalid\n", nb_desc);
rc = -EINVAL;
goto out;
}
@@ -291,7 +291,7 @@ int bnxt_rx_queue_setup_op(struct rte_eth_dev *eth_dev,
rxq = rte_zmalloc_socket("bnxt_rx_queue", sizeof(struct bnxt_rx_queue),
RTE_CACHE_LINE_SIZE, socket_id);
if (!rxq) {
- RTE_LOG(ERR, PMD, "bnxt_rx_queue allocation failed!");
+ RTE_LOG(ERR, PMD, "bnxt_rx_queue allocation failed!\n");
rc = -ENOMEM;
goto out;
}
@@ -313,7 +313,8 @@ int bnxt_rx_queue_setup_op(struct rte_eth_dev *eth_dev,
/* Allocate RX ring hardware descriptors */
if (bnxt_alloc_rings(bp, queue_idx, NULL, rxq->rx_ring, rxq->cp_ring,
"rxr")) {
- RTE_LOG(ERR, PMD, "ring_dma_zone_reserve for rx_ring failed!");
+ RTE_LOG(ERR, PMD,
+ "ring_dma_zone_reserve for rx_ring failed!\n");
bnxt_rx_queue_release_op(rxq);
rc = -ENOMEM;
goto out;
diff --git a/drivers/net/bnxt/bnxt_vnic.c b/drivers/net/bnxt/bnxt_vnic.c
index dfbaedb..1f9e152 100644
--- a/drivers/net/bnxt/bnxt_vnic.c
+++ b/drivers/net/bnxt/bnxt_vnic.c
@@ -253,7 +253,7 @@ int bnxt_alloc_vnic_mem(struct bnxt *bp)
vnic_mem = rte_zmalloc("bnxt_vnic_info",
max_vnics * sizeof(struct bnxt_vnic_info), 0);
if (vnic_mem == NULL) {
- RTE_LOG(ERR, PMD, "Failed to alloc memory for %d VNICs",
+ RTE_LOG(ERR, PMD, "Failed to alloc memory for %d VNICs\n",
max_vnics);
return -ENOMEM;
}
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 23/28] bnxt: Add support for VLAN filter and strip dev_ops
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (21 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 22/28] bnxt: Add newlines to all RTE_LOG() format strings Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 24/28] bnxt: Add support for mac_addr_set dev_op Ajit Khaparde
` (5 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
This patch adds VLAN strip and offload callbacks.
To add a VLAN filter:
For each VNIC and each associated filter(s)
if VLAN exists:
if VLAN matches vlan_id
VLAN filter already exists, just skip and continue
else
add a new MAC+VLAN filter
else
Remove the old MAC only filter
Add a new MAC+VLAN filter
To remove a VLAN filter:
For each VNIC and each associated filter(s)
if VLAN exists && VLAN matches vlan_id
remove the MAC+VLAN filter
add a new MAC only filter
else
VLAN filter doesn't exist, just skip and continue
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 246 +++++++++++++++++++++++++++++++++++++++++
drivers/net/bnxt/bnxt_hwrm.c | 2 +-
drivers/net/bnxt/bnxt_rxr.c | 2 +-
3 files changed, 248 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index ee13ed6..641dcd4 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -137,6 +137,7 @@ static const struct rte_pci_id bnxt_pci_id_map[] = {
ETH_RSS_NONFRAG_IPV6_TCP | \
ETH_RSS_NONFRAG_IPV6_UDP)
+static void bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask);
/***********************/
/*
@@ -484,6 +485,7 @@ static int bnxt_dev_lsc_intr_setup(struct rte_eth_dev *eth_dev)
static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
{
struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ int vlan_mask = 0;
int rc;
bp->dev_stopped = 0;
@@ -493,6 +495,13 @@ static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
goto error;
bnxt_link_update_op(eth_dev, 0);
+
+ if (eth_dev->data->dev_conf.rxmode.hw_vlan_filter)
+ vlan_mask |= ETH_VLAN_FILTER_MASK;
+ if (eth_dev->data->dev_conf.rxmode.hw_vlan_strip)
+ vlan_mask |= ETH_VLAN_STRIP_MASK;
+ bnxt_vlan_offload_set_op(eth_dev, vlan_mask);
+
return 0;
error:
@@ -1087,6 +1096,240 @@ bnxt_udp_tunnel_port_del_op(struct rte_eth_dev *eth_dev,
return rc;
}
+static int bnxt_del_vlan_filter(struct bnxt *bp, uint16_t vlan_id)
+{
+ struct bnxt_filter_info *filter, *temp_filter, *new_filter;
+ struct bnxt_vnic_info *vnic;
+ unsigned int i;
+ int rc = 0;
+ uint32_t chk = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN;
+
+ /* Cycle through all VNICs */
+ for (i = 0; i < bp->nr_vnics; i++) {
+ /*
+ * For each VNIC and each associated filter(s)
+ * if VLAN exists && VLAN matches vlan_id
+ * remove the MAC+VLAN filter
+ * add a new MAC only filter
+ * else
+ * VLAN filter doesn't exist, just skip and continue
+ */
+ STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) {
+ filter = STAILQ_FIRST(&vnic->filter);
+ while (filter) {
+ temp_filter = STAILQ_NEXT(filter, next);
+
+ if (filter->enables & chk &&
+ filter->l2_ovlan == vlan_id) {
+ /* Must delete the filter */
+ STAILQ_REMOVE(&vnic->filter, filter,
+ bnxt_filter_info, next);
+ bnxt_hwrm_clear_filter(bp, filter);
+ STAILQ_INSERT_TAIL(
+ &bp->free_filter_list,
+ filter, next);
+
+ /*
+ * Need to examine to see if the MAC
+ * filter already existed or not before
+ * allocating a new one
+ */
+
+ new_filter = bnxt_alloc_filter(bp);
+ if (!new_filter) {
+ RTE_LOG(ERR, PMD,
+ "MAC/VLAN filter alloc failed\n");
+ rc = -ENOMEM;
+ goto exit;
+ }
+ STAILQ_INSERT_TAIL(&vnic->filter,
+ new_filter, next);
+ /* Inherit MAC from previous filter */
+ new_filter->mac_index =
+ filter->mac_index;
+ memcpy(new_filter->l2_addr,
+ filter->l2_addr, ETHER_ADDR_LEN);
+ /* MAC only filter */
+ rc = bnxt_hwrm_set_filter(bp, vnic,
+ new_filter);
+ if (rc)
+ goto exit;
+ RTE_LOG(INFO, PMD,
+ "Del Vlan filter for %d\n",
+ vlan_id);
+ }
+ filter = temp_filter;
+ }
+ }
+ }
+exit:
+ return rc;
+}
+
+static int bnxt_add_vlan_filter(struct bnxt *bp, uint16_t vlan_id)
+{
+ struct bnxt_filter_info *filter, *temp_filter, *new_filter;
+ struct bnxt_vnic_info *vnic;
+ unsigned int i;
+ int rc = 0;
+ uint32_t en = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN |
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK;
+ uint32_t chk = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN;
+
+ /* Cycle through all VNICs */
+ for (i = 0; i < bp->nr_vnics; i++) {
+ /*
+ * For each VNIC and each associated filter(s)
+ * if VLAN exists:
+ * if VLAN matches vlan_id
+ * VLAN filter already exists, just skip and continue
+ * else
+ * add a new MAC+VLAN filter
+ * else
+ * Remove the old MAC only filter
+ * Add a new MAC+VLAN filter
+ */
+ STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) {
+ filter = STAILQ_FIRST(&vnic->filter);
+ while (filter) {
+ temp_filter = STAILQ_NEXT(filter, next);
+
+ if (filter->enables & chk) {
+ if (filter->l2_ovlan == vlan_id)
+ goto cont;
+ } else {
+ /* Must delete the MAC filter */
+ STAILQ_REMOVE(&vnic->filter, filter,
+ bnxt_filter_info, next);
+ bnxt_hwrm_clear_filter(bp, filter);
+ filter->l2_ovlan = 0;
+ STAILQ_INSERT_TAIL(
+ &bp->free_filter_list,
+ filter, next);
+ }
+ new_filter = bnxt_alloc_filter(bp);
+ if (!new_filter) {
+ RTE_LOG(ERR, PMD,
+ "MAC/VLAN filter alloc failed\n");
+ rc = -ENOMEM;
+ goto exit;
+ }
+ STAILQ_INSERT_TAIL(&vnic->filter, new_filter,
+ next);
+ /* Inherit MAC from the previous filter */
+ new_filter->mac_index = filter->mac_index;
+ memcpy(new_filter->l2_addr, filter->l2_addr,
+ ETHER_ADDR_LEN);
+ /* MAC + VLAN ID filter */
+ new_filter->l2_ovlan = vlan_id;
+ new_filter->l2_ovlan_mask = 0xF000;
+ new_filter->enables |= en;
+ rc = bnxt_hwrm_set_filter(bp, vnic, new_filter);
+ if (rc)
+ goto exit;
+ RTE_LOG(INFO, PMD,
+ "Added Vlan filter for %d\n", vlan_id);
+cont:
+ filter = temp_filter;
+ }
+ }
+ }
+exit:
+ return rc;
+}
+
+static int bnxt_vlan_filter_set_op(struct rte_eth_dev *eth_dev,
+ uint16_t vlan_id, int on)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+
+ /* These operations apply to ALL existing MAC/VLAN filters */
+ if (on)
+ return bnxt_add_vlan_filter(bp, vlan_id);
+ else
+ return bnxt_del_vlan_filter(bp, vlan_id);
+}
+
+static void bnxt_vlan_strip_queue_set_op(struct rte_eth_dev *eth_dev,
+ uint16_t rx_queue_id, int on)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ struct bnxt_rx_queue *rxq = eth_dev->data->rx_queues[rx_queue_id];
+ struct bnxt_vnic_info *vnic;
+ int rc = 0;
+
+ /* VLAN strip at the VNIC level is supported */
+ if (rxq == NULL) {
+ RTE_LOG(ERR, PMD, "Invalid Rx queue id %d!", rx_queue_id);
+ return;
+ }
+ if (rxq->vnic == NULL) {
+ RTE_LOG(ERR, PMD, "No VNIC associated with Rx queue id %d!",
+ rx_queue_id);
+ return;
+ }
+
+ vnic = rxq->vnic;
+ if ((on && vnic->vlan_strip) || (!on && !vnic->vlan_strip)) {
+ RTE_LOG(INFO, PMD,
+ "Rx queue %d already has VLAN strip set to %d",
+ rx_queue_id, on);
+ return;
+ }
+ vnic->vlan_strip = on ? true : false;
+ rc = bnxt_hwrm_vnic_cfg(bp, vnic);
+ if (rc) {
+ RTE_LOG(ERR, PMD, "HWRM vnic cfg failure rc: %x\n", rc);
+ return;
+ }
+
+ /*
+ * TODO: If there are other rx queues that belong to the same VNIC,
+ * we have the following options:
+ * 1. Accept the change and silently force the same VLAN strip
+ * setting to all associated rx queues [current implementation]
+ * 2. Migrate any rx queues that are hanging on the same VNIC to
+ * a new VNIC
+ * 3. Reject the request if there are other rx queues using the
+ * same VNIC
+ */
+}
+
+static void
+bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
+{
+ struct bnxt *bp = (struct bnxt *)dev->data->dev_private;
+ unsigned int i;
+
+ if (mask & ETH_VLAN_FILTER_MASK) {
+ if (!dev->data->dev_conf.rxmode.hw_vlan_filter) {
+ /* Remove any VLAN filters programmed */
+ for (i = 0; i < 4095; i++)
+ bnxt_del_vlan_filter(bp, i);
+ }
+ RTE_LOG(INFO, PMD, "VLAN Filtering: %d\n",
+ dev->data->dev_conf.rxmode.hw_vlan_filter);
+ }
+
+ if (mask & ETH_VLAN_STRIP_MASK) {
+ /* Enable or disable VLAN stripping */
+ for (i = 0; i < bp->nr_vnics; i++) {
+ struct bnxt_vnic_info *vnic = &bp->vnic_info[i];
+ if (dev->data->dev_conf.rxmode.hw_vlan_strip)
+ vnic->vlan_strip = true;
+ else
+ vnic->vlan_strip = false;
+ bnxt_hwrm_vnic_cfg(bp, vnic);
+ }
+ RTE_LOG(INFO, PMD, "VLAN Strip Offload: %d\n",
+ dev->data->dev_conf.rxmode.hw_vlan_strip);
+ }
+
+ if (mask & ETH_VLAN_EXTEND_MASK)
+ RTE_LOG(ERR, PMD, "Extend VLAN Not supported\n");
+}
+
+
/*
* Initialization
*/
@@ -1120,6 +1363,9 @@ static const struct eth_dev_ops bnxt_dev_ops = {
.flow_ctrl_set = bnxt_flow_ctrl_set_op,
.udp_tunnel_port_add = bnxt_udp_tunnel_port_add_op,
.udp_tunnel_port_del = bnxt_udp_tunnel_port_del_op,
+ .vlan_filter_set = bnxt_vlan_filter_set_op,
+ .vlan_strip_queue_set = bnxt_vlan_strip_queue_set_op,
+ .vlan_offload_set = bnxt_vlan_offload_set_op,
};
static bool bnxt_vf_pciid(uint16_t id)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 47f264b..dd823c3 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -893,7 +893,7 @@ int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic)
int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic)
{
int rc = 0;
- struct hwrm_vnic_cfg_input req = {.req_type = 0 };
+ struct hwrm_vnic_cfg_input req = { 0 };
struct hwrm_vnic_cfg_output *resp = bp->hwrm_cmd_resp_addr;
HWRM_PREP(req, VNIC_CFG, -1, resp);
diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index 5d93de2..c01abe0 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -144,7 +144,7 @@ static uint16_t bnxt_rx_pkt(struct rte_mbuf **rx_pkt,
(RX_PKT_CMPL_METADATA_VID_MASK |
RX_PKT_CMPL_METADATA_DE |
RX_PKT_CMPL_METADATA_PRI_MASK);
- mbuf->ol_flags |= PKT_RX_VLAN_PKT;
+ mbuf->ol_flags |= PKT_RX_VLAN_PKT | PKT_RX_VLAN_STRIPPED;
}
rx_buf->mbuf = NULL;
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 24/28] bnxt: Add support for mac_addr_set dev_op
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (22 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 23/28] bnxt: Add support for VLAN filter and strip dev_ops Ajit Khaparde
@ 2017-03-28 3:48 ` Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 25/28] bnxt: add support for xstats Ajit Khaparde
` (4 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:48 UTC (permalink / raw)
To: dev
This patch adds support for the mac_addr_set dev_op.
This feature is not supported for a VF device.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 641dcd4..af0bd49 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1330,6 +1330,42 @@ bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
}
+static void
+bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
+{
+ struct bnxt *bp = (struct bnxt *)dev->data->dev_private;
+ /* Default Filter is tied to VNIC 0 */
+ struct bnxt_vnic_info *vnic = &bp->vnic_info[0];
+ struct bnxt_filter_info *filter;
+ int rc;
+
+ if (BNXT_VF(bp))
+ return;
+
+ memcpy(bp->mac_addr, addr, sizeof(bp->mac_addr));
+ memcpy(&dev->data->mac_addrs[0], bp->mac_addr, ETHER_ADDR_LEN);
+
+ STAILQ_FOREACH(filter, &vnic->filter, next) {
+ /* Default Filter is at Index 0 */
+ if (filter->mac_index != 0)
+ continue;
+ rc = bnxt_hwrm_clear_filter(bp, filter);
+ if (rc)
+ break;
+ memcpy(filter->l2_addr, bp->mac_addr, ETHER_ADDR_LEN);
+ memset(filter->l2_addr_mask, 0xff, ETHER_ADDR_LEN);
+ filter->flags |= HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX;
+ filter->enables |=
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR |
+ HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK;
+ rc = bnxt_hwrm_set_filter(bp, vnic, filter);
+ if (rc)
+ break;
+ filter->mac_index = 0;
+ RTE_LOG(DEBUG, PMD, "Set MAC addr\n");
+ }
+}
+
/*
* Initialization
*/
@@ -1366,6 +1402,7 @@ static const struct eth_dev_ops bnxt_dev_ops = {
.vlan_filter_set = bnxt_vlan_filter_set_op,
.vlan_strip_queue_set = bnxt_vlan_strip_queue_set_op,
.vlan_offload_set = bnxt_vlan_offload_set_op,
+ .mac_addr_set = bnxt_set_default_mac_addr_op,
};
static bool bnxt_vf_pciid(uint16_t id)
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 25/28] bnxt: add support for xstats
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (23 preceding siblings ...)
2017-03-28 3:48 ` [dpdk-dev] [PATCH 24/28] bnxt: Add support for mac_addr_set dev_op Ajit Khaparde
@ 2017-03-28 3:49 ` Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 26/28] bnxt: use only long BDs in Tx path Ajit Khaparde
` (3 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:49 UTC (permalink / raw)
To: dev
This patch adds support to get and reset xstats dev_ops
dev_ops added:
xstats_get, xstats_get_name, xstats_reset
HWRM commands added:
hwrm_port_qstats, hwrm_port_clr_stats
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt.h | 7 +
drivers/net/bnxt/bnxt_ethdev.c | 90 ++++++
drivers/net/bnxt/bnxt_hwrm.c | 34 +++
drivers/net/bnxt/bnxt_hwrm.h | 2 +
drivers/net/bnxt/bnxt_stats.c | 203 ++++++++++++++
drivers/net/bnxt/bnxt_stats.h | 12 +
drivers/net/bnxt/hsi_struct_def_dpdk.h | 494 +++++++++++++++++++++++++++++++++
7 files changed, 842 insertions(+)
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 50b3d02..2c5458b 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -125,6 +125,7 @@ struct bnxt {
uint32_t flags;
#define BNXT_FLAG_REGISTERED (1 << 0)
#define BNXT_FLAG_VF (1 << 1)
+#define BNXT_FLAG_PORT_STATS (1 << 2)
#define BNXT_PF(bp) (!((bp)->flags & BNXT_FLAG_VF))
#define BNXT_VF(bp) ((bp)->flags & BNXT_FLAG_VF)
#define BNXT_NPAR_ENABLED(bp) ((bp)->port_partition_type)
@@ -133,10 +134,16 @@ struct bnxt {
unsigned int rx_nr_rings;
unsigned int rx_cp_nr_rings;
struct bnxt_rx_queue **rx_queues;
+ const void *rx_mem_zone;
+ struct rx_port_stats *hw_rx_port_stats;
+ phys_addr_t hw_rx_port_stats_map;
unsigned int tx_nr_rings;
unsigned int tx_cp_nr_rings;
struct bnxt_tx_queue **tx_queues;
+ const void *tx_mem_zone;
+ struct tx_port_stats *hw_tx_port_stats;
+ phys_addr_t hw_tx_port_stats_map;
/* Default completion ring */
struct bnxt_cp_ring_info *def_cp_ring;
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index af0bd49..b41088f 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -283,6 +283,12 @@ static int bnxt_init_chip(struct bnxt *bp)
goto err_out;
}
+ rc = bnxt_hwrm_port_qstats(bp);
+ if (rc) {
+ RTE_LOG(ERR, PMD, "HWRM Port qstats failure rc: %x\n", rc);
+ goto err_out;
+ }
+
rc = bnxt_get_hwrm_link_config(bp, &new);
if (rc) {
RTE_LOG(ERR, PMD, "HWRM Get link config failure rc: %x\n", rc);
@@ -539,6 +545,7 @@ static void bnxt_dev_stop_op(struct rte_eth_dev *eth_dev)
eth_dev->data->dev_link.link_status = 0;
}
bnxt_set_hwrm_link_config(bp, false);
+ bnxt_hwrm_port_clr_stats(bp);
bnxt_shutdown_nic(bp);
bp->dev_stopped = 1;
}
@@ -1403,6 +1410,9 @@ static const struct eth_dev_ops bnxt_dev_ops = {
.vlan_strip_queue_set = bnxt_vlan_strip_queue_set_op,
.vlan_offload_set = bnxt_vlan_offload_set_op,
.mac_addr_set = bnxt_set_default_mac_addr_op,
+ .xstats_get = bnxt_dev_xstats_get_op,
+ .xstats_get_names = bnxt_dev_xstats_get_names_op,
+ .xstats_reset = bnxt_dev_xstats_reset_op,
};
static bool bnxt_vf_pciid(uint16_t id)
@@ -1459,7 +1469,11 @@ static int
bnxt_dev_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(eth_dev->device);
+ char mz_name[RTE_MEMZONE_NAMESIZE];
+ const struct rte_memzone *mz = NULL;
static int version_printed;
+ uint32_t total_alloc_len;
+ phys_addr_t mz_phys_addr;
struct bnxt *bp;
int rc;
@@ -1486,6 +1500,80 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
eth_dev->rx_pkt_burst = &bnxt_recv_pkts;
eth_dev->tx_pkt_burst = &bnxt_xmit_pkts;
+ if (BNXT_PF(bp) && pci_dev->id.device_id != BROADCOM_DEV_ID_NS2) {
+ snprintf(mz_name, RTE_MEMZONE_NAMESIZE,
+ "bnxt_%04x:%02x:%02x:%02x-%s", pci_dev->addr.domain,
+ pci_dev->addr.bus, pci_dev->addr.devid,
+ pci_dev->addr.function, "rx_port_stats");
+ mz_name[RTE_MEMZONE_NAMESIZE - 1] = 0;
+ mz = rte_memzone_lookup(mz_name);
+ total_alloc_len = RTE_CACHE_LINE_ROUNDUP(
+ sizeof(struct rx_port_stats) + 512);
+ if (!mz) {
+ mz = rte_memzone_reserve(mz_name, total_alloc_len,
+ SOCKET_ID_ANY,
+ RTE_MEMZONE_2MB |
+ RTE_MEMZONE_SIZE_HINT_ONLY);
+ if (mz == NULL)
+ return -ENOMEM;
+ }
+ memset(mz->addr, 0, mz->len);
+ mz_phys_addr = mz->phys_addr;
+ if ((phys_addr_t)mz->addr == mz_phys_addr) {
+ RTE_LOG(WARNING, PMD,
+ "Memzone physical address same as virtual.\n");
+ RTE_LOG(WARNING, PMD,
+ "Using rte_mem_virt2phy()\n");
+ mz_phys_addr = rte_mem_virt2phy(mz->addr);
+ if (mz_phys_addr == 0) {
+ RTE_LOG(ERR, PMD,
+ "unable to map address to physical memory\n");
+ return -ENOMEM;
+ }
+ }
+
+ bp->rx_mem_zone = (const void *)mz;
+ bp->hw_rx_port_stats = mz->addr;
+ bp->hw_rx_port_stats_map = mz_phys_addr;
+
+ snprintf(mz_name, RTE_MEMZONE_NAMESIZE,
+ "bnxt_%04x:%02x:%02x:%02x-%s", pci_dev->addr.domain,
+ pci_dev->addr.bus, pci_dev->addr.devid,
+ pci_dev->addr.function, "tx_port_stats");
+ mz_name[RTE_MEMZONE_NAMESIZE - 1] = 0;
+ mz = rte_memzone_lookup(mz_name);
+ total_alloc_len = RTE_CACHE_LINE_ROUNDUP(
+ sizeof(struct tx_port_stats) + 512);
+ if (!mz) {
+ mz = rte_memzone_reserve(mz_name, total_alloc_len,
+ SOCKET_ID_ANY,
+ RTE_MEMZONE_2MB |
+ RTE_MEMZONE_SIZE_HINT_ONLY);
+ if (mz == NULL)
+ return -ENOMEM;
+ }
+ memset(mz->addr, 0, mz->len);
+ mz_phys_addr = mz->phys_addr;
+ if ((phys_addr_t)mz->addr == mz_phys_addr) {
+ RTE_LOG(WARNING, PMD,
+ "Memzone physical address same as virtual.\n");
+ RTE_LOG(WARNING, PMD,
+ "Using rte_mem_virt2phy()\n");
+ mz_phys_addr = rte_mem_virt2phy(mz->addr);
+ if (mz_phys_addr == 0) {
+ RTE_LOG(ERR, PMD,
+ "unable to map address to physical memory\n");
+ return -ENOMEM;
+ }
+ }
+
+ bp->tx_mem_zone = (const void *)mz;
+ bp->hw_tx_port_stats = mz->addr;
+ bp->hw_tx_port_stats_map = mz_phys_addr;
+
+ bp->flags |= BNXT_FLAG_PORT_STATS;
+ }
+
rc = bnxt_alloc_hwrm_resources(bp);
if (rc) {
RTE_LOG(ERR, PMD,
@@ -1647,6 +1735,8 @@ bnxt_dev_uninit(struct rte_eth_dev *eth_dev) {
}
rc = bnxt_hwrm_func_driver_unregister(bp, 0);
bnxt_free_hwrm_resources(bp);
+ rte_memzone_free((const struct rte_memzone *)bp->tx_mem_zone);
+ rte_memzone_free((const struct rte_memzone *)bp->rx_mem_zone);
if (bp->dev_stopped == 0)
bnxt_dev_close_op(eth_dev);
if (bp->pf.vf_info)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index dd823c3..894ea79 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2301,3 +2301,37 @@ int bnxt_hwrm_func_vf_vnic_query_and_config(struct bnxt *bp, uint16_t vf,
return rc;
}
+
+int bnxt_hwrm_port_qstats(struct bnxt *bp)
+{
+ struct hwrm_port_qstats_input req = {0};
+ struct hwrm_port_qstats_output *resp = bp->hwrm_cmd_resp_addr;
+ struct bnxt_pf_info *pf = &bp->pf;
+ int rc;
+
+ if (!(bp->flags & BNXT_FLAG_PORT_STATS))
+ return 0;
+
+ HWRM_PREP(req, PORT_QSTATS, -1, resp);
+ req.port_id = rte_cpu_to_le_16(pf->port_id);
+ req.tx_stat_host_addr = rte_cpu_to_le_64(bp->hw_tx_port_stats_map);
+ req.rx_stat_host_addr = rte_cpu_to_le_64(bp->hw_rx_port_stats_map);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+ return rc;
+}
+
+int bnxt_hwrm_port_clr_stats(struct bnxt *bp)
+{
+ struct hwrm_port_clr_stats_input req = {0};
+ struct hwrm_port_clr_stats_output *resp = bp->hwrm_cmd_resp_addr;
+ struct bnxt_pf_info *pf = &bp->pf;
+ int rc;
+
+ HWRM_PREP(req, PORT_CLR_STATS, -1, resp);
+ req.port_id = rte_cpu_to_le_16(pf->port_id);
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+ return rc;
+}
+
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 33c246c..cb1a4a9 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -127,4 +127,6 @@ void vf_vnic_set_rxmask_cb(struct bnxt_vnic_info *vnic, void *flagp);
int bnxt_hwrm_func_vf_vnic_query_and_config(struct bnxt *bp, uint16_t vf,
void (*vnic_cb)(struct bnxt_vnic_info *, void *), void *cbdata,
int (*hwrm_cb)(struct bnxt *bp, struct bnxt_vnic_info *vnic));
+int bnxt_hwrm_port_qstats(struct bnxt *bp);
+int bnxt_hwrm_port_clr_stats(struct bnxt *bp);
#endif
diff --git a/drivers/net/bnxt/bnxt_stats.c b/drivers/net/bnxt/bnxt_stats.c
index 40c9cac..c87eefb 100644
--- a/drivers/net/bnxt/bnxt_stats.c
+++ b/drivers/net/bnxt/bnxt_stats.c
@@ -43,6 +43,130 @@
#include "bnxt_txq.h"
#include "hsi_struct_def_dpdk.h"
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+static const struct bnxt_xstats_name_off bnxt_rx_stats_strings[] = {
+ {"rx_64b_frames", offsetof(struct rx_port_stats,
+ rx_64b_frames)},
+ {"rx_65b_127b_frames", offsetof(struct rx_port_stats,
+ rx_65b_127b_frames)},
+ {"rx_128b_255b_frames", offsetof(struct rx_port_stats,
+ rx_128b_255b_frames)},
+ {"rx_256b_511b_frames", offsetof(struct rx_port_stats,
+ rx_256b_511b_frames)},
+ {"rx_512b_1023b_frames", offsetof(struct rx_port_stats,
+ rx_512b_1023b_frames)},
+ {"rx_1024b_1518_frames", offsetof(struct rx_port_stats,
+ rx_1024b_1518_frames)},
+ {"rx_good_vlan_frames", offsetof(struct rx_port_stats,
+ rx_good_vlan_frames)},
+ {"rx_1519b_2047b_frames", offsetof(struct rx_port_stats,
+ rx_1519b_2047b_frames)},
+ {"rx_2048b_4095b_frames", offsetof(struct rx_port_stats,
+ rx_2048b_4095b_frames)},
+ {"rx_4096b_9216b_frames", offsetof(struct rx_port_stats,
+ rx_4096b_9216b_frames)},
+ {"rx_9217b_16383b_frames", offsetof(struct rx_port_stats,
+ rx_9217b_16383b_frames)},
+ {"rx_total_frames", offsetof(struct rx_port_stats,
+ rx_total_frames)},
+ {"rx_ucast_frames", offsetof(struct rx_port_stats,
+ rx_ucast_frames)},
+ {"rx_mcast_frames", offsetof(struct rx_port_stats,
+ rx_mcast_frames)},
+ {"rx_bcast_frames", offsetof(struct rx_port_stats,
+ rx_bcast_frames)},
+ {"rx_fcs_err_frames", offsetof(struct rx_port_stats,
+ rx_fcs_err_frames)},
+ {"rx_ctrl_frames", offsetof(struct rx_port_stats,
+ rx_ctrl_frames)},
+ {"rx_pause_frames", offsetof(struct rx_port_stats,
+ rx_pause_frames)},
+ {"rx_pfc_frames", offsetof(struct rx_port_stats,
+ rx_pfc_frames)},
+ {"rx_align_err_frames", offsetof(struct rx_port_stats,
+ rx_align_err_frames)},
+ {"rx_ovrsz_frames", offsetof(struct rx_port_stats,
+ rx_ovrsz_frames)},
+ {"rx_jbr_frames", offsetof(struct rx_port_stats,
+ rx_jbr_frames)},
+ {"rx_mtu_err_frames", offsetof(struct rx_port_stats,
+ rx_mtu_err_frames)},
+ {"rx_tagged_frames", offsetof(struct rx_port_stats,
+ rx_tagged_frames)},
+ {"rx_double_tagged_frames", offsetof(struct rx_port_stats,
+ rx_double_tagged_frames)},
+ {"rx_good_frames", offsetof(struct rx_port_stats,
+ rx_good_frames)},
+ {"rx_undrsz_frames", offsetof(struct rx_port_stats,
+ rx_undrsz_frames)},
+ {"rx_eee_lpi_events", offsetof(struct rx_port_stats,
+ rx_eee_lpi_events)},
+ {"rx_eee_lpi_duration", offsetof(struct rx_port_stats,
+ rx_eee_lpi_duration)},
+ {"rx_bytes", offsetof(struct rx_port_stats,
+ rx_bytes)},
+ {"rx_runt_bytes", offsetof(struct rx_port_stats,
+ rx_runt_bytes)},
+ {"rx_runt_frames", offsetof(struct rx_port_stats,
+ rx_runt_frames)},
+};
+
+static const struct bnxt_xstats_name_off bnxt_tx_stats_strings[] = {
+ {"tx_64b_frames", offsetof(struct tx_port_stats,
+ tx_64b_frames)},
+ {"tx_65b_127b_frames", offsetof(struct tx_port_stats,
+ tx_65b_127b_frames)},
+ {"tx_128b_255b_frames", offsetof(struct tx_port_stats,
+ tx_128b_255b_frames)},
+ {"tx_256b_511b_frames", offsetof(struct tx_port_stats,
+ tx_256b_511b_frames)},
+ {"tx_512b_1023b_frames", offsetof(struct tx_port_stats,
+ tx_512b_1023b_frames)},
+ {"tx_1024b_1518_frames", offsetof(struct tx_port_stats,
+ tx_1024b_1518_frames)},
+ {"tx_good_vlan_frames", offsetof(struct tx_port_stats,
+ tx_good_vlan_frames)},
+ {"tx_1519b_2047_frames", offsetof(struct tx_port_stats,
+ tx_1519b_2047_frames)},
+ {"tx_2048b_4095b_frames", offsetof(struct tx_port_stats,
+ tx_2048b_4095b_frames)},
+ {"tx_4096b_9216b_frames", offsetof(struct tx_port_stats,
+ tx_4096b_9216b_frames)},
+ {"tx_9217b_16383b_frames", offsetof(struct tx_port_stats,
+ tx_9217b_16383b_frames)},
+ {"tx_good_frames", offsetof(struct tx_port_stats,
+ tx_good_frames)},
+ {"tx_total_frames", offsetof(struct tx_port_stats,
+ tx_total_frames)},
+ {"tx_ucast_frames", offsetof(struct tx_port_stats,
+ tx_ucast_frames)},
+ {"tx_mcast_frames", offsetof(struct tx_port_stats,
+ tx_mcast_frames)},
+ {"tx_bcast_frames", offsetof(struct tx_port_stats,
+ tx_bcast_frames)},
+ {"tx_pause_frames", offsetof(struct tx_port_stats,
+ tx_pause_frames)},
+ {"tx_pfc_frames", offsetof(struct tx_port_stats,
+ tx_pfc_frames)},
+ {"tx_jabber_frames", offsetof(struct tx_port_stats,
+ tx_jabber_frames)},
+ {"tx_fcs_err_frames", offsetof(struct tx_port_stats,
+ tx_fcs_err_frames)},
+ {"tx_err", offsetof(struct tx_port_stats,
+ tx_err)},
+ {"tx_fifo_underruns", offsetof(struct tx_port_stats,
+ tx_fifo_underruns)},
+ {"tx_eee_lpi_events", offsetof(struct tx_port_stats,
+ tx_eee_lpi_events)},
+ {"tx_eee_lpi_duration", offsetof(struct tx_port_stats,
+ tx_eee_lpi_duration)},
+ {"tx_total_collisions", offsetof(struct tx_port_stats,
+ tx_total_collisions)},
+ {"tx_bytes", offsetof(struct tx_port_stats,
+ tx_bytes)},
+};
+
/*
* Statistics functions
*/
@@ -140,3 +264,82 @@ void bnxt_stats_reset_op(struct rte_eth_dev *eth_dev)
bnxt_clear_all_hwrm_stat_ctxs(bp);
}
+
+int bnxt_dev_xstats_get_op(struct rte_eth_dev *eth_dev,
+ struct rte_eth_xstat *xstats, unsigned n)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+
+ unsigned int count, i;
+
+ bnxt_hwrm_port_qstats(bp);
+
+ count = ARRAY_SIZE(bnxt_rx_stats_strings) +
+ ARRAY_SIZE(bnxt_tx_stats_strings);
+
+ if (n < count)
+ return count;
+
+ count = 0;
+ for (i = 0; i < ARRAY_SIZE(bnxt_rx_stats_strings); i++) {
+ uint64_t *rx_stats = (uint64_t *)bp->hw_rx_port_stats;
+ xstats[count].value = rte_le_to_cpu_64(
+ *(uint64_t *)((char *)rx_stats +
+ bnxt_rx_stats_strings[i].offset));
+ count++;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bnxt_tx_stats_strings); i++) {
+ uint64_t *tx_stats = (uint64_t *)bp->hw_tx_port_stats;
+ xstats[count].value = rte_le_to_cpu_64(
+ *(uint64_t *)((char *)tx_stats +
+ bnxt_tx_stats_strings[i].offset));
+ count++;
+ }
+
+ return count;
+}
+
+int bnxt_dev_xstats_get_names_op(__rte_unused struct rte_eth_dev *eth_dev,
+ struct rte_eth_xstat_name *xstats_names, __rte_unused unsigned limit)
+{
+ const unsigned int stat_cnt = ARRAY_SIZE(bnxt_rx_stats_strings) +
+ ARRAY_SIZE(bnxt_tx_stats_strings);
+ unsigned int i, count;
+
+ if (xstats_names != NULL) {
+ count = 0;
+
+ for (i = 0; i < ARRAY_SIZE(bnxt_rx_stats_strings); i++) {
+ snprintf(xstats_names[count].name,
+ sizeof(xstats_names[count].name),
+ "%s",
+ bnxt_rx_stats_strings[i].name);
+ count++;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bnxt_tx_stats_strings); i++) {
+ snprintf(xstats_names[count].name,
+ sizeof(xstats_names[count].name),
+ "%s",
+ bnxt_tx_stats_strings[i].name);
+ count++;
+ }
+ }
+ return stat_cnt;
+}
+
+void bnxt_dev_xstats_reset_op(struct rte_eth_dev *eth_dev)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+
+ if (bp->flags & BNXT_FLAG_PORT_STATS && !BNXT_NPAR_PF(bp))
+ bnxt_hwrm_port_clr_stats(bp);
+
+ if (BNXT_VF(bp))
+ RTE_LOG(ERR, PMD, "Operation not supported on a VF device\n");
+ if (BNXT_NPAR_PF(bp))
+ RTE_LOG(ERR, PMD, "Operation not supported on a MF device\n");
+ if (!(bp->flags & BNXT_FLAG_PORT_STATS))
+ RTE_LOG(ERR, PMD, "Operation not supported\n");
+}
diff --git a/drivers/net/bnxt/bnxt_stats.h b/drivers/net/bnxt/bnxt_stats.h
index 65408a4..c4b31b0 100644
--- a/drivers/net/bnxt/bnxt_stats.h
+++ b/drivers/net/bnxt/bnxt_stats.h
@@ -34,11 +34,23 @@
#ifndef _BNXT_STATS_H_
#define _BNXT_STATS_H_
+#include <inttypes.h>
+#include <stdbool.h>
#include <rte_ethdev.h>
void bnxt_free_stats(struct bnxt *bp);
void bnxt_stats_get_op(struct rte_eth_dev *eth_dev,
struct rte_eth_stats *bnxt_stats);
void bnxt_stats_reset_op(struct rte_eth_dev *eth_dev);
+int bnxt_dev_xstats_get_names_op(__rte_unused struct rte_eth_dev *eth_dev,
+ struct rte_eth_xstat_name *xstats_names, __rte_unused unsigned limit);
+int bnxt_dev_xstats_get_op(struct rte_eth_dev *eth_dev,
+ struct rte_eth_xstat *xstats, unsigned n);
+void bnxt_dev_xstats_reset_op(struct rte_eth_dev *eth_dev);
+
+struct bnxt_xstats_name_off {
+ char name[RTE_ETH_XSTATS_NAME_SIZE];
+ uint64_t offset;
+};
#endif
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 31b8557..49b8517 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -97,6 +97,8 @@ struct ctx_hw_stats64 {
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
#define HWRM_FUNC_BUF_RGTR (UINT32_C(0x1f))
#define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
+#define HWRM_PORT_QSTATS (UINT32_C(0x23))
+#define HWRM_PORT_CLR_STATS (UINT32_C(0x25))
#define HWRM_PORT_PHY_QCFG (UINT32_C(0x27))
#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
@@ -1364,6 +1366,350 @@ struct hwrm_err_output {
*/
} __attribute__((packed));
+/* Port Tx Statistics Formats (408 bytes) */
+struct tx_port_stats {
+ uint64_t tx_64b_frames;
+ /* Total Number of 64 Bytes frames transmitted */
+ uint64_t tx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames transmitted */
+ uint64_t tx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames transmitted */
+ uint64_t tx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames transmitted */
+ uint64_t tx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames transmitted */
+ uint64_t tx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames transmitted */
+ uint64_t tx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame
+ * transmitted which is 1519 to 1522 bytes in length inclusive
+ * (excluding framing bits but including FCS bytes).
+ */
+ uint64_t tx_1519b_2047_frames;
+ /* Total Number of 1519-2047 Bytes frames transmitted */
+ uint64_t tx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames transmitted */
+ uint64_t tx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames transmitted */
+ uint64_t tx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames transmitted */
+ uint64_t tx_good_frames;
+ /* Total Number of good frames transmitted */
+ uint64_t tx_total_frames;
+ /* Total Number of frames transmitted */
+ uint64_t tx_ucast_frames;
+ /* Total number of unicast frames transmitted */
+ uint64_t tx_mcast_frames;
+ /* Total number of multicast frames transmitted */
+ uint64_t tx_bcast_frames;
+ /* Total number of broadcast frames transmitted */
+ uint64_t tx_pause_frames;
+ /* Total number of PAUSE control frames transmitted */
+ uint64_t tx_pfc_frames;
+ /* Total number of PFC/per-priority PAUSE control frames transmitted */
+ uint64_t tx_jabber_frames;
+ /* Total number of jabber frames transmitted */
+ uint64_t tx_fcs_err_frames;
+ /* Total number of frames transmitted with FCS error */
+ uint64_t tx_control_frames;
+ /* Total number of control frames transmitted */
+ uint64_t tx_oversz_frames;
+ /* Total number of over-sized frames transmitted */
+ uint64_t tx_single_dfrl_frames;
+ /* Total number of frames with single deferral */
+ uint64_t tx_multi_dfrl_frames;
+ /* Total number of frames with multiple deferrals */
+ uint64_t tx_single_coll_frames;
+ /* Total number of frames with single collision */
+ uint64_t tx_multi_coll_frames;
+ /* Total number of frames with multiple collisions */
+ uint64_t tx_late_coll_frames;
+ /* Total number of frames with late collisions */
+ uint64_t tx_excessive_coll_frames;
+ /* Total number of frames with excessive collisions */
+ uint64_t tx_frag_frames;
+ /* Total number of fragmented frames transmitted */
+ uint64_t tx_err;
+ /* Total number of transmit errors */
+ uint64_t tx_tagged_frames;
+ /* Total number of single VLAN tagged frames transmitted */
+ uint64_t tx_dbl_tagged_frames;
+ /* Total number of double VLAN tagged frames transmitted */
+ uint64_t tx_runt_frames;
+ /* Total number of runt frames transmitted */
+ uint64_t tx_fifo_underruns;
+ /* Total number of TX FIFO under runs */
+ uint64_t tx_pfc_ena_frames_pri0;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 0
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri1;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 1
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri2;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 2
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri3;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 3
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri4;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 4
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri5;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 5
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri6;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 6
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri7;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 7
+ * transmitted
+ */
+ uint64_t tx_eee_lpi_events;
+ /* Total number of EEE LPI Events on TX */
+ uint64_t tx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on TX */
+ uint64_t tx_llfc_logical_msgs;
+ /*
+ * Total number of Link Level Flow Control (LLFC) messages
+ * transmitted
+ */
+ uint64_t tx_hcfc_msgs;
+ /* Total number of HCFC messages transmitted */
+ uint64_t tx_total_collisions;
+ /* Total number of TX collisions */
+ uint64_t tx_bytes;
+ /* Total number of transmitted bytes */
+ uint64_t tx_xthol_frames;
+ /* Total number of end-to-end HOL frames */
+ uint64_t tx_stat_discard;
+ /* Total Tx Drops per Port reported by STATS block */
+ uint64_t tx_stat_error;
+ /* Total Tx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
+/* Port Rx Statistics Formats (528 bytes) */
+struct rx_port_stats {
+ uint64_t rx_64b_frames;
+ /* Total Number of 64 Bytes frames received */
+ uint64_t rx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames received */
+ uint64_t rx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames received */
+ uint64_t rx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames received */
+ uint64_t rx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames received */
+ uint64_t rx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames received */
+ uint64_t rx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame
+ * received which is 1519 to 1522 bytes in length inclusive
+ * (excluding framing bits but including FCS bytes).
+ */
+ uint64_t rx_1519b_2047b_frames;
+ /* Total Number of 1519-2047 Bytes frames received */
+ uint64_t rx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames received */
+ uint64_t rx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames received */
+ uint64_t rx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames received */
+ uint64_t rx_total_frames;
+ /* Total number of frames received */
+ uint64_t rx_ucast_frames;
+ /* Total number of unicast frames received */
+ uint64_t rx_mcast_frames;
+ /* Total number of multicast frames received */
+ uint64_t rx_bcast_frames;
+ /* Total number of broadcast frames received */
+ uint64_t rx_fcs_err_frames;
+ /* Total number of received frames with FCS error */
+ uint64_t rx_ctrl_frames;
+ /* Total number of control frames received */
+ uint64_t rx_pause_frames;
+ /* Total number of PAUSE frames received */
+ uint64_t rx_pfc_frames;
+ /* Total number of PFC frames received */
+ uint64_t rx_unsupported_opcode_frames;
+ /* Total number of frames received with an unsupported opcode */
+ uint64_t rx_unsupported_da_pausepfc_frames;
+ /*
+ * Total number of frames received with an unsupported DA for
+ * pause and PFC
+ */
+ uint64_t rx_wrong_sa_frames;
+ /* Total number of frames received with an unsupported SA */
+ uint64_t rx_align_err_frames;
+ /* Total number of received packets with alignment error */
+ uint64_t rx_oor_len_frames;
+ /* Total number of received frames with out-of-range length */
+ uint64_t rx_code_err_frames;
+ /* Total number of received frames with error termination */
+ uint64_t rx_false_carrier_frames;
+ /*
+ * Total number of received frames with a false carrier is
+ * detected during idle, as defined by RX_ER samples active and
+ * RXD is 0xE. The event is reported along with the statistics
+ * generated on the next received frame. Only one false carrier
+ * condition can be detected and logged between frames. Carrier
+ * event, valid for 10M/100M speed modes only.
+ */
+ uint64_t rx_ovrsz_frames;
+ /* Total number of over-sized frames received */
+ uint64_t rx_jbr_frames;
+ /* Total number of jabber packets received */
+ uint64_t rx_mtu_err_frames;
+ /* Total number of received frames with MTU error */
+ uint64_t rx_match_crc_frames;
+ /* Total number of received frames with CRC match */
+ uint64_t rx_promiscuous_frames;
+ /* Total number of frames received promiscuously */
+ uint64_t rx_tagged_frames;
+ /* Total number of received frames with one or two VLAN tags */
+ uint64_t rx_double_tagged_frames;
+ /* Total number of received frames with two VLAN tags */
+ uint64_t rx_trunc_frames;
+ /* Total number of truncated frames received */
+ uint64_t rx_good_frames;
+ /* Total number of good frames (without errors) received */
+ uint64_t rx_pfc_xon2xoff_frames_pri0;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 0
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri1;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 1
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri2;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 2
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri3;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 3
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri4;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 4
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri5;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 5
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri6;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 6
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri7;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 7
+ */
+ uint64_t rx_pfc_ena_frames_pri0;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 0
+ */
+ uint64_t rx_pfc_ena_frames_pri1;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 1
+ */
+ uint64_t rx_pfc_ena_frames_pri2;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 2
+ */
+ uint64_t rx_pfc_ena_frames_pri3;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 3
+ */
+ uint64_t rx_pfc_ena_frames_pri4;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 4
+ */
+ uint64_t rx_pfc_ena_frames_pri5;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 5
+ */
+ uint64_t rx_pfc_ena_frames_pri6;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 6
+ */
+ uint64_t rx_pfc_ena_frames_pri7;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 7
+ */
+ uint64_t rx_sch_crc_err_frames;
+ /* Total Number of frames received with SCH CRC error */
+ uint64_t rx_undrsz_frames;
+ /* Total Number of under-sized frames received */
+ uint64_t rx_frag_frames;
+ /* Total Number of fragmented frames received */
+ uint64_t rx_eee_lpi_events;
+ /* Total number of RX EEE LPI Events */
+ uint64_t rx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on RX */
+ uint64_t rx_llfc_physical_msgs;
+ /*
+ * Total number of physical type Link Level Flow Control (LLFC)
+ * messages received
+ */
+ uint64_t rx_llfc_logical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC)
+ * messages received
+ */
+ uint64_t rx_llfc_msgs_with_crc_err;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC)
+ * messages received with CRC error
+ */
+ uint64_t rx_hcfc_msgs;
+ /* Total number of HCFC messages received */
+ uint64_t rx_hcfc_msgs_with_crc_err;
+ /* Total number of HCFC messages received with CRC error */
+ uint64_t rx_bytes;
+ /* Total number of received bytes */
+ uint64_t rx_runt_bytes;
+ /* Total number of bytes received in runt frames */
+ uint64_t rx_runt_frames;
+ /* Total number of runt frames received */
+ uint64_t rx_stat_discard;
+ /* Total Rx Discards per Port reported by STATS block */
+ uint64_t rx_stat_err;
+ /* Total Rx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
/* hwrm_ver_get */
/*
* Description: This function is called by a driver to determine the HWRM
@@ -7163,6 +7509,154 @@ struct hwrm_stat_ctx_free_output {
*/
} __attribute__((packed));
+/* hwrm_port_qstats */
+/* Description: This function returns per port Ethernet statistics. */
+/* Input (40 bytes) */
+struct hwrm_port_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2[3];
+ uint8_t unused_3;
+ uint64_t tx_stat_host_addr;
+ /* This is the host address where Tx port statistics will be stored */
+ uint64_t rx_stat_host_addr;
+ /* This is the host address where Rx port statistics will be stored */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint16_t tx_stat_size;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_clr_stats */
+/*
+ * Description: This function clears per port statistics. The HWRM shall not
+ * allow a VF driver to clear port statistics. The HWRM shall not allow a PF
+ * driver to clear port statistics in a partitioning mode. The HWRM may allow a
+ * PF driver to clear port statistics in the non-partitioning mode.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
/* hwrm_stat_ctx_clr_stats */
/* Description: This command clears statistics of a context. */
/* Input (24 bytes) */
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 26/28] bnxt: use only long BDs in Tx path
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (24 preceding siblings ...)
2017-03-28 3:49 ` [dpdk-dev] [PATCH 25/28] bnxt: add support for xstats Ajit Khaparde
@ 2017-03-28 3:49 ` Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 27/28] bnxt: add support for set_mc_addr_list dev_op Ajit Khaparde
` (2 subsequent siblings)
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:49 UTC (permalink / raw)
To: dev
Devices before Cu+B1 cannot mix long and short buffer descriptors.
Use the long BD in all cases.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_txr.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_txr.c b/drivers/net/bnxt/bnxt_txr.c
index 6870b16..6222f62 100644
--- a/drivers/net/bnxt/bnxt_txr.c
+++ b/drivers/net/bnxt/bnxt_txr.c
@@ -159,6 +159,10 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt,
TX_BD_LONG_FLAGS_LHINT_LT2K
};
+ /* Devices before Cu+B1 need to avoid mixing long and short BDs
+ * Revisit this fix once Cu+B1 is available.
+ */
+ long_bd = true;
if (tx_pkt->ol_flags & (PKT_TX_TCP_SEG | PKT_TX_TCP_CKSUM |
PKT_TX_UDP_CKSUM | PKT_TX_IP_CKSUM |
PKT_TX_VLAN_PKT))
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 27/28] bnxt: add support for set_mc_addr_list dev_op
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (25 preceding siblings ...)
2017-03-28 3:49 ` [dpdk-dev] [PATCH 26/28] bnxt: use only long BDs in Tx path Ajit Khaparde
@ 2017-03-28 3:49 ` Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 28/28] bnxt: update to HWRM version 1.7.4 Ajit Khaparde
2017-03-29 12:14 ` [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ferruh Yigit
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:49 UTC (permalink / raw)
To: dev
This patch adds set_mc_addr_list dev_ops to support adding Multicast addr.
If the number of Multicast addresses is more than the maximum number of
Multicast addresses that the hardware supports, the PMD will enable
Multicast Promiscuous mode for the specified function.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 31 +++++++++++++++++++++++++++++++
drivers/net/bnxt/bnxt_hwrm.c | 13 +++++++++----
drivers/net/bnxt/bnxt_vnic.c | 7 ++++++-
drivers/net/bnxt/bnxt_vnic.h | 6 +++++-
4 files changed, 51 insertions(+), 6 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index b41088f..25b8959 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1373,6 +1373,36 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
}
}
+static int
+bnxt_dev_set_mc_addr_list_op(struct rte_eth_dev *eth_dev,
+ struct ether_addr *mc_addr_set,
+ uint32_t nb_mc_addr)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ char *mc_addr_list = (char *)mc_addr_set;
+ struct bnxt_vnic_info *vnic;
+ uint32_t off = 0, i = 0;
+
+ vnic = &bp->vnic_info[0];
+
+ if (nb_mc_addr > BNXT_MAX_MC_ADDRS) {
+ vnic->flags |= BNXT_VNIC_INFO_ALLMULTI;
+ goto allmulti;
+ }
+
+ /* TODO Check for Duplicate mcast addresses */
+ vnic->flags &= ~BNXT_VNIC_INFO_ALLMULTI;
+ for (i = 0; i < nb_mc_addr; i++) {
+ memcpy(vnic->mc_list + off, &mc_addr_list[i], ETHER_ADDR_LEN);
+ off += ETHER_ADDR_LEN;
+ }
+
+ vnic->mc_addr_cnt = i;
+
+allmulti:
+ return bnxt_hwrm_cfa_l2_set_rx_mask(bp, vnic);
+}
+
/*
* Initialization
*/
@@ -1413,6 +1443,7 @@ static const struct eth_dev_ops bnxt_dev_ops = {
.xstats_get = bnxt_dev_xstats_get_op,
.xstats_get_names = bnxt_dev_xstats_get_names_op,
.xstats_reset = bnxt_dev_xstats_reset_op,
+ .set_mc_addr_list = bnxt_dev_set_mc_addr_list_op,
};
static bool bnxt_vf_pciid(uint16_t id)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 894ea79..c7cc5a0 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -192,7 +192,7 @@ int bnxt_hwrm_cfa_l2_clear_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic)
struct hwrm_cfa_l2_set_rx_mask_output *resp = bp->hwrm_cmd_resp_addr;
HWRM_PREP(req, CFA_L2_SET_RX_MASK, -1, resp);
- req.vnic_id = rte_cpu_to_le_16(vnic->fw_vnic_id);
+ req.vnic_id = rte_cpu_to_le_32(vnic->fw_vnic_id);
req.mask = 0;
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
@@ -226,6 +226,11 @@ int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic)
mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST;
if (vnic->flags & BNXT_VNIC_INFO_MCAST)
mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST;
+ if (vnic->mc_addr_cnt) {
+ mask |= HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST;
+ req.num_mc_entries = rte_cpu_to_le_32(vnic->mc_addr_cnt);
+ req.mc_tbl_addr = rte_cpu_to_le_64(vnic->mc_list_dma_addr);
+ }
req.mask = rte_cpu_to_le_32(mask);
@@ -886,7 +891,7 @@ int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic)
HWRM_CHECK_RESULT;
- vnic->fw_vnic_id = rte_le_to_cpu_16(resp->vnic_id);
+ vnic->fw_vnic_id = rte_le_to_cpu_32(resp->vnic_id);
return rc;
}
@@ -903,7 +908,7 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic)
rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP |
HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE |
HWRM_VNIC_CFG_INPUT_ENABLES_MRU);
- req.vnic_id = rte_cpu_to_le_16(vnic->fw_vnic_id);
+ req.vnic_id = rte_cpu_to_le_32(vnic->fw_vnic_id);
req.dflt_ring_grp =
rte_cpu_to_le_16(bp->grp_info[vnic->start_grp_id].fw_grp_id);
req.rss_rule = rte_cpu_to_le_16(vnic->fw_rss_cos_lb_ctx);
@@ -1010,7 +1015,7 @@ int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic)
HWRM_PREP(req, VNIC_FREE, -1, resp);
- req.vnic_id = rte_cpu_to_le_16(vnic->fw_vnic_id);
+ req.vnic_id = rte_cpu_to_le_32(vnic->fw_vnic_id);
rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
diff --git a/drivers/net/bnxt/bnxt_vnic.c b/drivers/net/bnxt/bnxt_vnic.c
index 1f9e152..e6fc500 100644
--- a/drivers/net/bnxt/bnxt_vnic.c
+++ b/drivers/net/bnxt/bnxt_vnic.c
@@ -169,7 +169,8 @@ int bnxt_alloc_vnic_attributes(struct bnxt *bp)
char mz_name[RTE_MEMZONE_NAMESIZE];
uint32_t entry_length = RTE_CACHE_LINE_ROUNDUP(
HW_HASH_INDEX_SIZE * sizeof(*vnic->rss_table) +
- HW_HASH_KEY_SIZE);
+ HW_HASH_KEY_SIZE +
+ BNXT_MAX_MC_ADDRS * ETHER_ADDR_LEN);
uint16_t max_vnics;
int i;
phys_addr_t mz_phys_addr;
@@ -217,6 +218,10 @@ int bnxt_alloc_vnic_attributes(struct bnxt *bp)
vnic->rss_hash_key_dma_addr = vnic->rss_table_dma_addr +
HW_HASH_INDEX_SIZE * sizeof(*vnic->rss_table);
+ vnic->mc_list = (void *)((char *)vnic->rss_hash_key +
+ HW_HASH_KEY_SIZE);
+ vnic->mc_list_dma_addr = vnic->rss_hash_key_dma_addr +
+ HW_HASH_KEY_SIZE;
}
return 0;
diff --git a/drivers/net/bnxt/bnxt_vnic.h b/drivers/net/bnxt/bnxt_vnic.h
index 5695240..bc90b74 100644
--- a/drivers/net/bnxt/bnxt_vnic.h
+++ b/drivers/net/bnxt/bnxt_vnic.h
@@ -41,7 +41,7 @@ struct bnxt_vnic_info {
STAILQ_ENTRY(bnxt_vnic_info) next;
uint8_t ff_pool_idx;
- uint16_t fw_vnic_id; /* returned by Chimp during alloc */
+ uint32_t fw_vnic_id; /* returned by Chimp during alloc */
uint16_t fw_rss_cos_lb_ctx;
uint16_t ctx_is_rss_cos_lb;
#define MAX_NUM_TRAFFIC_CLASSES 8
@@ -58,6 +58,10 @@ struct bnxt_vnic_info {
uint16_t *rss_table;
phys_addr_t rss_hash_key_dma_addr;
void *rss_hash_key;
+ phys_addr_t mc_list_dma_addr;
+ char *mc_list;
+ uint32_t mc_addr_cnt;
+#define BNXT_MAX_MC_ADDRS 16
uint32_t flags;
#define BNXT_VNIC_INFO_PROMISC (1 << 0)
#define BNXT_VNIC_INFO_ALLMULTI (1 << 1)
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* [dpdk-dev] [PATCH 28/28] bnxt: update to HWRM version 1.7.4
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (26 preceding siblings ...)
2017-03-28 3:49 ` [dpdk-dev] [PATCH 27/28] bnxt: add support for set_mc_addr_list dev_op Ajit Khaparde
@ 2017-03-28 3:49 ` Ajit Khaparde
2017-03-29 12:14 ` [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ferruh Yigit
28 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-28 3:49 UTC (permalink / raw)
To: dev
This patch updates the Broadcom bnxt PMD to version 1.7.4
Most of the changes in the patch are in the hsi_struct_def_dpdk.h - an
autogenerated file. The changes in the *.c files are because of changes
in the macro names.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_cpr.c | 2 +-
drivers/net/bnxt/bnxt_hwrm.c | 10 +-
drivers/net/bnxt/bnxt_ring.c | 4 +-
drivers/net/bnxt/hsi_struct_def_dpdk.h | 5079 +++++++++++++++++---------------
4 files changed, 2734 insertions(+), 2361 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_cpr.c b/drivers/net/bnxt/bnxt_cpr.c
index 3fc3758..2162f19 100644
--- a/drivers/net/bnxt/bnxt_cpr.c
+++ b/drivers/net/bnxt/bnxt_cpr.c
@@ -138,7 +138,7 @@ int bnxt_alloc_def_cp_ring(struct bnxt *bp)
int rc;
rc = bnxt_hwrm_ring_alloc(bp, cp_ring,
- HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL,
0, HWRM_NA_SIGNATURE);
if (rc)
goto err_out;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index c7cc5a0..45eb6fd 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -566,7 +566,7 @@ static int bnxt_hwrm_port_phy_cfg(struct bnxt *bp, struct bnxt_link_info *conf)
req.enables = rte_cpu_to_le_32(enables);
} else {
req.flags =
- rte_cpu_to_le_32(HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DOWN);
+ rte_cpu_to_le_32(HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN);
RTE_LOG(INFO, PMD, "Force Link Down\n");
}
@@ -673,7 +673,7 @@ int bnxt_hwrm_ring_alloc(struct bnxt *bp,
req.enables = rte_cpu_to_le_32(rte_le_to_cpu_32(req.enables) |
HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID);
break;
- case HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL:
+ case HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL:
req.ring_type = ring_type;
/*
* TODO: Some HWRM versions crash with
@@ -694,7 +694,7 @@ int bnxt_hwrm_ring_alloc(struct bnxt *bp,
if (rc == 0 && resp->error_code)
rc = rte_le_to_cpu_16(resp->error_code);
switch (ring_type) {
- case HWRM_RING_FREE_INPUT_RING_TYPE_CMPL:
+ case HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL:
RTE_LOG(ERR, PMD,
"hwrm_ring_alloc cp failed. rc:%d\n", rc);
return rc;
@@ -735,7 +735,7 @@ int bnxt_hwrm_ring_free(struct bnxt *bp,
rc = rte_le_to_cpu_16(resp->error_code);
switch (ring_type) {
- case HWRM_RING_FREE_INPUT_RING_TYPE_CMPL:
+ case HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL:
RTE_LOG(ERR, PMD, "hwrm_ring_free cp failed. rc:%d\n",
rc);
return rc;
@@ -1318,7 +1318,7 @@ static void bnxt_free_cp_ring(struct bnxt *bp,
struct bnxt_ring *cp_ring = cpr->cp_ring_struct;
bnxt_hwrm_ring_free(bp, cp_ring,
- HWRM_RING_FREE_INPUT_RING_TYPE_CMPL);
+ HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL);
cp_ring->fw_ring_id = INVALID_HW_RING_ID;
bp->grp_info[idx].cp_fw_ring_id = INVALID_HW_RING_ID;
memset(cpr->cp_desc_ring, 0, cpr->cp_ring_struct->ring_size *
diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
index bd7b4b6..e9963b3 100644
--- a/drivers/net/bnxt/bnxt_ring.c
+++ b/drivers/net/bnxt/bnxt_ring.c
@@ -237,7 +237,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
/* Rx cmpl */
rc = bnxt_hwrm_ring_alloc(bp, cp_ring,
- HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL,
idx, HWRM_NA_SIGNATURE);
if (rc)
goto err_out;
@@ -275,7 +275,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
/* Tx cmpl */
rc = bnxt_hwrm_ring_alloc(bp, cp_ring,
- HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL,
+ HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL,
idx, HWRM_NA_SIGNATURE);
if (rc)
goto err_out;
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 49b8517..2f11bb1 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) Broadcom Limited.
+ * Copyright(c) 2001-2017 Broadcom Limited.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -31,55 +31,27 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#ifndef _HSI_STRUCT_DEF_EXTERNAL_H_
-#define _HSI_STRUCT_DEF_EXTERNAL_H_
-
-/*
- * per-context HW statistics -- chip view
- */
-
-struct ctx_hw_stats64 {
- uint64_t rx_ucast_pkts;
- uint64_t rx_mcast_pkts;
- uint64_t rx_bcast_pkts;
- uint64_t rx_drop_pkts;
- uint64_t rx_discard_pkts;
- uint64_t rx_ucast_bytes;
- uint64_t rx_mcast_bytes;
- uint64_t rx_bcast_bytes;
-
- uint64_t tx_ucast_pkts;
- uint64_t tx_mcast_pkts;
- uint64_t tx_bcast_pkts;
- uint64_t tx_drop_pkts;
- uint64_t tx_discard_pkts;
- uint64_t tx_ucast_bytes;
- uint64_t tx_mcast_bytes;
- uint64_t tx_bcast_bytes;
-
- uint64_t tpa_pkts;
- uint64_t tpa_bytes;
- uint64_t tpa_events;
- uint64_t tpa_aborts;
-} __attribute__((packed));
-
-/* HW Resource Manager Specification 1.5.1 */
+#ifndef _HSI_STRUCT_DEF_DPDK_
+#define _HSI_STRUCT_DEF_DPDK_
+/* HSI and HWRM Specification 1.7.4 */
#define HWRM_VERSION_MAJOR 1
-#define HWRM_VERSION_MINOR 5
-#define HWRM_VERSION_UPDATE 1
-
-#define HWRM_VERSION_STR "1.5.1"
+#define HWRM_VERSION_MINOR 7
+#define HWRM_VERSION_UPDATE 4
+#define HWRM_VERSION_STR "1.7.4"
/*
* Following is the signature for HWRM message field that indicates not
- * applicable (All F's). Need to cast it the size of the field if needed.
+ * applicable (All F's). Need to cast it the size of the field if needed.
*/
#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
-#define HWRM_MAX_REQ_LEN 128 /* hwrm_func_buf_rgtr */
-#define HWRM_MAX_RESP_LEN 176 /* hwrm_func_qstats */
-#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
+#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
+#define HWRM_MAX_RESP_LEN (248) /* hwrm_selftest_qlist */
+#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
#define HW_HASH_KEY_SIZE 40
-#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
+#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
+#define HWRM_ROCE_SP_HSI_VERSION_MAJOR 1
+#define HWRM_ROCE_SP_HSI_VERSION_MINOR 7
+#define HWRM_ROCE_SP_HSI_VERSION_UPDATE 4
/*
* Request types
@@ -124,11 +96,27 @@ struct ctx_hw_stats64 {
#define HWRM_EXEC_FWD_RESP (UINT32_C(0xd0))
#define HWRM_REJECT_FWD_RESP (UINT32_C(0xd1))
-/* Return Codes */
-#define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
-#define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
-
-/* Short TX BD (16 bytes) */
+/*
+ * Note: The Host Software Interface (HSI) and Hardware Resource Manager (HWRM)
+ * specification describes the data structures used in Ethernet packet or RDMA
+ * message data transfers as well as an abstract interface for managing Ethernet
+ * NIC hardware resources.
+ */
+/* Ethernet Data path Host Structures */
+/*
+ * Description: The following three sections document the host structures used
+ * between device and software drivers for communicating Ethernet packets.
+ */
+/* BD Ring Structures */
+/*
+ * Description: This structure is used to inform the NIC of a location for and
+ * an aggregation buffer that will be used for packet data that is received. An
+ * aggregation buffer creates a different kind of completion operation for a
+ * packet where a variable number of BDs may be used to place the packet in the
+ * host. RX Rings that have aggregation buffers are known as aggregation rings
+ * and must contain only aggregation buffers.
+ */
+/* Short TX BD (16 bytes) */
struct tx_bd_short {
uint16_t flags_type;
/*
@@ -161,10 +149,10 @@ struct tx_bd_short {
/*
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet. A value of 1 indicates that this
- * BD is the only BD (and that the it is a short BD). A value of
+ * BD is the only BD (and that the it is a short BD). A value of
* 3 indicates either 3 short BDs or 1 long BD and one short BD
* in the packet. A value of 0 indicates that there are 32 BD
- * locations in the packet (the maximum). This field is valid
+ * locations in the packet (the maximum). This field is valid
* only on the first BD of a packet.
*/
#define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
@@ -185,7 +173,8 @@ struct tx_bd_short {
#define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
/* indicates packet length >= 2KB */
#define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
- #define TX_BD_SHORT_FLAGS_LHINT_LAST TX_BD_SHORT_FLAGS_LHINT_GTE2K
+ #define TX_BD_SHORT_FLAGS_LHINT_LAST \
+ TX_BD_SHORT_FLAGS_LHINT_GTE2K
/*
* If set to 1, the device immediately updates the Send Consumer
* Index after the buffer associated with this descriptor has
@@ -225,7 +214,7 @@ struct tx_bd_short {
*/
} __attribute__((packed));
-/* Long TX BD (32 bytes split to 2 16-byte struct) */
+/* Long TX BD (32 bytes split to 2 16-byte struct) */
struct tx_bd_long {
uint16_t flags_type;
/*
@@ -258,10 +247,10 @@ struct tx_bd_long {
/*
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet. A value of 1 indicates that this
- * BD is the only BD (and that the it is a short BD). A value of
+ * BD is the only BD (and that the it is a short BD). A value of
* 3 indicates either 3 short BDs or 1 long BD and one short BD
* in the packet. A value of 0 indicates that there are 32 BD
- * locations in the packet (the maximum). This field is valid
+ * locations in the packet (the maximum). This field is valid
* only on the first BD of a packet.
*/
#define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
@@ -282,7 +271,8 @@ struct tx_bd_long {
#define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
/* indicates packet length >= 2KB */
#define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
- #define TX_BD_LONG_FLAGS_LHINT_LAST TX_BD_LONG_FLAGS_LHINT_GTE2K
+ #define TX_BD_LONG_FLAGS_LHINT_LAST \
+ TX_BD_LONG_FLAGS_LHINT_GTE2K
/*
* If set to 1, the device immediately updates the Send Consumer
* Index after the buffer associated with this descriptor has
@@ -372,7 +362,7 @@ struct tx_bd_long_hi {
* bit is set, outer UDP checksum will be calculated for the
* following cases: 1. Packets with tcp_udp_chksum flag set to
* offload checksum for inner packet AND the inner packet is
- * TCP/UDP. If the inner packet is ICMP for example (non-
+ * TCP/UDP. If the inner packet is ICMP for example (non-
* TCP/UDP), even if the tcp_udp_chksum is set, the outer UDP
* checksum will not be calculated. 2. Packets with lso flag set
* which implies inner TCP checksum calculation as part of LSO
@@ -404,7 +394,7 @@ struct tx_bd_long_hi {
* to one when LSO is '1', then the IPID of the tunnel IP header
* will be incremented for each subsequent segment of an LSO
* operation. The flag is ignored if the LSO packet is a normal
- * (non-tunneled) TCP packet.
+ * (non-tunneled) TCP packet.
*/
#define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80)
/*
@@ -472,7 +462,7 @@ struct tx_bd_long_hi {
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16)
/* Value programmed in CFA VLANTPID register. */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16)
- #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG
/* When key=1, This is the VLAN tag TPID select value. */
#define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000)
@@ -486,15 +476,16 @@ struct tx_bd_long_hi {
/* No editing */
#define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28)
/*
- * - meta[17:16] - TPID select value (0 =
+ * - meta[17:16] - TPID select value (0 =
* 0x8100). - meta[15:12] - PRI/DE value. -
* meta[11:0] - VID value.
*/
#define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
- #define TX_BD_LONG_CFA_META_KEY_LAST TX_BD_LONG_CFA_META_KEY_VLAN_TAG
+ #define TX_BD_LONG_CFA_META_KEY_LAST \
+ TX_BD_LONG_CFA_META_KEY_VLAN_TAG
} __attribute__((packed));
-/* RX Producer Packet BD (16 bytes) */
+/* RX Producer Packet BD (16 bytes) */
struct rx_prod_pkt_bd {
uint16_t flags_type;
/* This value identifies the type of buffer descriptor. */
@@ -502,7 +493,7 @@ struct rx_prod_pkt_bd {
#define RX_PROD_PKT_BD_TYPE_SFT 0
/*
* Indicates that this BD is 16B long and is an
- * RX Producer (ie. empty) buffer descriptor.
+ * RX Producer (ie. empty) buffer descriptor.
*/
#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4)
/*
@@ -570,7 +561,7 @@ struct rx_prod_pkt_bd {
/* Completion Ring Structures */
/* Note: This structure is used by the HWRM to communicate HWRM Error. */
-/* Base Completion Record (16 bytes) */
+/* Base Completion Record (16 bytes) */
struct cmpl_base {
uint16_t type;
/* unused is 10 b */
@@ -649,7 +640,7 @@ struct cmpl_base {
/* info4 is 32 b */
} __attribute__((packed));
-/* TX Completion Record (16 bytes) */
+/* TX Completion Record (16 bytes) */
struct tx_cmpl {
uint16_t flags_type;
/*
@@ -701,7 +692,7 @@ struct tx_cmpl {
#define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1)
/* Bad Format: BDs were not formatted correctly. */
#define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1)
- #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
/*
* When this bit is '1', it indicates that the length of the
@@ -738,7 +729,7 @@ struct tx_cmpl {
/* unused3 is 32 b */
} __attribute__((packed));
-/* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */
+/* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_pkt_cmpl {
uint16_t flags_type;
/*
@@ -773,10 +764,12 @@ struct rx_pkt_cmpl {
* field.
*/
#define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
- #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
/* This bit is '1' if the RSS field in this completion is valid. */
#define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
/* unused is 1 b */
+ #define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
@@ -832,7 +825,8 @@ struct rx_pkt_cmpl {
* that a timestamp was taken for the packet.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP (UINT32_C(0x9) << 12)
- #define RX_PKT_CMPL_FLAGS_ITYPE_LAST RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
+ #define RX_PKT_CMPL_FLAGS_ITYPE_LAST \
+ RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
#define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
#define RX_PKT_CMPL_FLAGS_SFT 6
uint16_t len;
@@ -950,7 +944,7 @@ struct rx_pkt_cmpl_hi {
* the vlan TPID value.
*/
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
- #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN
/*
* This field indicates the IP type for the inner-most IP
@@ -1000,15 +994,18 @@ struct rx_pkt_cmpl_hi {
* means that the packet could not be placed
* into 7 physical buffers or less.
*/
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT (UINT32_C(0x1) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
/*
* Not On Chip: All BDs needed for the packet
* were not on-chip when the packet arrived.
*/
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP (UINT32_C(0x2) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
/* Bad Format: BDs were not formatted correctly. */
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT (UINT32_C(0x3) << 1)
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT
/* This indicates that there was an error in the IP header checksum. */
#define RX_PKT_CMPL_ERRORS_IP_CS_ERROR UINT32_C(0x10)
@@ -1049,39 +1046,45 @@ struct rx_pkt_cmpl_hi {
* match expectation from L2 Ethertype for IPv4
* and IPv6 in the tunnel header.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION (UINT32_C(0x1) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 9)
/*
* Indicates that header length is out of range
* in the tunnel header. Valid for IPv4.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN (UINT32_C(0x2) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 9)
/*
* Indicates that the physical packet is shorter
* than that claimed by the PPPoE header length
* for a tunnel PPPoE packet.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR (UINT32_C(0x3) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \
+ (UINT32_C(0x3) << 9)
/*
* Indicates that physical packet is shorter
* than that claimed by the tunnel l3 header
* length. Valid for IPv4, or IPv6 tunnel packet
* packets.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR (UINT32_C(0x4) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 9)
/*
* Indicates that the physical packet is shorter
* than that claimed by the tunnel UDP header
* length for a tunnel UDP packet that is not
* fragmented.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR (UINT32_C(0x5) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 9)
/*
* indicates that the IPv4 TTL or IPv6 hop limit
- * check have failed (e.g. TTL = 0) in the
+ * check have failed (e.g. TTL = 0) in the
* tunnel header. Valid for IPv4, and IPv6.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL (UINT32_C(0x6) << 9)
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
+ (UINT32_C(0x6) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL
/*
* This indicates that there was an error in the inner portion
@@ -1101,15 +1104,17 @@ struct rx_pkt_cmpl_hi {
* and IPv6 or that option other than VFT was
* parsed on FCoE packet.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION (UINT32_C(0x1) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 12)
/*
* indicates that header length is out of range.
* Valid for IPv4 and RoCE
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN (UINT32_C(0x2) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 12)
/*
* indicates that the IPv4 TTL or IPv6 hop limit
- * check have failed (e.g. TTL = 0). Valid for
+ * check have failed (e.g. TTL = 0). Valid for
* IPv4, and IPv6
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL (UINT32_C(0x3) << 12)
@@ -1118,18 +1123,21 @@ struct rx_pkt_cmpl_hi {
* than that claimed by the l3 header length.
* Valid for IPv4, IPv6 packet or RoCE packets.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR (UINT32_C(0x4) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 12)
/*
* Indicates that the physical packet is shorter
* than that claimed by the UDP header length
* for a UDP packet that is not fragmented.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR (UINT32_C(0x5) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 12)
/*
* Indicates that TCP header length > IP
* payload. Valid for TCP packets only.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN (UINT32_C(0x6) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
+ (UINT32_C(0x6) << 12)
/* Indicates that TCP header length < 5. Valid for TCP. */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
(UINT32_C(0x7) << 12)
@@ -1138,9 +1146,9 @@ struct rx_pkt_cmpl_hi {
* TCP header size that does not match data
* offset in TCP header. Valid for TCP.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
(UINT32_C(0x8) << 12)
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN
#define RX_PKT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
#define RX_PKT_CMPL_ERRORS_SFT 1
@@ -1161,7 +1169,7 @@ struct rx_pkt_cmpl_hi {
#define RX_PKT_CMPL_REORDER_SFT 0
} __attribute__((packed));
-/* HWRM Forwarded Request (16 bytes) */
+/* HWRM Forwarded Request (16 bytes) */
struct hwrm_fwd_req_cmpl {
uint16_t req_len_type;
/* Length of forwarded request in bytes. */
@@ -1187,7 +1195,7 @@ struct hwrm_fwd_req_cmpl {
*/
uint32_t unused_0;
/* unused1 is 32 b */
- uint64_t req_buf_addr_v;
+ uint32_t req_buf_addr_v[2];
/* Address of forwarded request. */
/*
* This value is written by the NIC such that it will be
@@ -1200,7 +1208,7 @@ struct hwrm_fwd_req_cmpl {
#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
} __attribute__((packed));
-/* HWRM Asynchronous Event Completion Record (16 bytes) */
+/* HWRM Asynchronous Event Completion Record (16 bytes) */
struct hwrm_async_event_cmpl {
uint16_t type;
/* unused1 is 10 b */
@@ -1222,19 +1230,20 @@ struct hwrm_async_event_cmpl {
/* Link MTU changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE UINT32_C(0x1)
/* Link speed changed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
/* DCB Configuration changed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
/* Port connection not allowed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED UINT32_C(0x4)
/* Link speed configuration was not allowed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED UINT32_C(0x5)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
+ UINT32_C(0x5)
/* Link speed configuration change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE UINT32_C(0x6)
/* Port PHY configuration change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE UINT32_C(0x7)
/* Function driver unloaded */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
/* Function driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD UINT32_C(0x11)
/* Function FLR related processing has completed */
@@ -1243,12 +1252,13 @@ struct hwrm_async_event_cmpl {
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD UINT32_C(0x20)
/* PF driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD UINT32_C(0x21)
- /* VF Function Level Reset (FLR) */
+ /* VF Function Level Reset (FLR) */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR UINT32_C(0x30)
/* VF MAC Address Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE UINT32_C(0x31)
/* PF-VF communication channel status change. */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE UINT32_C(0x32)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
+ UINT32_C(0x32)
/* VF Configuration Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE UINT32_C(0x33)
/* HWRM Error */
@@ -1267,22 +1277,24 @@ struct hwrm_async_event_cmpl {
#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe)
#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1
uint8_t timestamp_lo;
- /* 8-lsb timestamp from POR (100-msec resolution) */
+ /* 8-lsb timestamp from POR (100-msec resolution) */
uint16_t timestamp_hi;
- /* 16-lsb timestamp from POR (100-msec resolution) */
+ /* 16-lsb timestamp from POR (100-msec resolution) */
uint32_t event_data1;
/* Event specific data */
} __attribute__((packed));
+/* hwrm_ver_get */
/*
- * Note: The Hardware Resource Manager (HWRM) manages various hardware resources
- * inside the chip. The HWRM is implemented in firmware, and runs on embedded
- * processors inside the chip. This firmware service is vital part of the chip.
- * The chip can not be used by a driver or HWRM client without the HWRM.
+ * Description: This function is called by a driver to determine the HWRM
+ * interface version supported by the HWRM firmware, the version of HWRM
+ * firmware implementation, the name of HWRM firmware, the versions of other
+ * embedded firmwares, and the names of other embedded firmwares, etc. Any
+ * interface or firmware version with major = 0, minor = 0, and update = 0 shall
+ * be considered an invalid version.
*/
-
-/* Input (16 bytes) */
-struct input {
+/* Input (24 bytes) */
+struct hwrm_ver_get_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -1309,10 +1321,37 @@ struct input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
+ uint8_t hwrm_intf_maj;
+ /*
+ * This field represents the major version of HWRM interface
+ * specification supported by the driver HWRM implementation.
+ * The interface major version is intended to change only when
+ * non backward compatible changes are made to the HWRM
+ * interface specification.
+ */
+ uint8_t hwrm_intf_min;
+ /*
+ * This field represents the minor version of HWRM interface
+ * specification supported by the driver HWRM implementation. A
+ * change in interface minor version is used to reflect
+ * significant backward compatible modification to HWRM
+ * interface specification. This can be due to addition or
+ * removal of functionality. HWRM interface specifications with
+ * the same major version but different minor versions are
+ * compatible.
+ */
+ uint8_t hwrm_intf_upd;
+ /*
+ * This field represents the update version of HWRM interface
+ * specification supported by the driver HWRM implementation.
+ * The interface update version is used to reflect minor changes
+ * or bug fixes to a released HWRM interface specification.
+ */
+ uint8_t unused_0[5];
} __attribute__((packed));
-/* Output (8 bytes) */
-struct output {
+/* Output (128 bytes) */
+struct hwrm_ver_get_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -1328,405 +1367,253 @@ struct output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_err_output {
- uint16_t error_code;
+ uint8_t hwrm_intf_maj;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * This field represents the major version of HWRM interface
+ * specification supported by the HWRM implementation. The
+ * interface major version is intended to change only when non
+ * backward compatible changes are made to the HWRM interface
+ * specification. A HWRM implementation that is compliant with
+ * this specification shall provide value of 1 in this field.
*/
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
+ uint8_t hwrm_intf_min;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This field represents the minor version of HWRM interface
+ * specification supported by the HWRM implementation. A change
+ * in interface minor version is used to reflect significant
+ * backward compatible modification to HWRM interface
+ * specification. This can be due to addition or removal of
+ * functionality. HWRM interface specifications with the same
+ * major version but different minor versions are compatible. A
+ * HWRM implementation that is compliant with this specification
+ * shall provide value of 2 in this field.
*/
- uint32_t opaque_0;
- /* debug info for this error response. */
- uint16_t opaque_1;
- /* debug info for this error response. */
- uint8_t cmd_err;
+ uint8_t hwrm_intf_upd;
/*
- * In the case of an error response, command specific error code is
- * returned in this field.
+ * This field represents the update version of HWRM interface
+ * specification supported by the HWRM implementation. The
+ * interface update version is used to reflect minor changes or
+ * bug fixes to a released HWRM interface specification. A HWRM
+ * implementation that is compliant with this specification
+ * shall provide value of 2 in this field.
*/
- uint8_t valid;
+ uint8_t hwrm_intf_rsvd;
+ uint8_t hwrm_fw_maj;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field represents the major version of HWRM firmware. A
+ * change in firmware major version represents a major firmware
+ * release.
*/
-} __attribute__((packed));
-
-/* Port Tx Statistics Formats (408 bytes) */
-struct tx_port_stats {
- uint64_t tx_64b_frames;
- /* Total Number of 64 Bytes frames transmitted */
- uint64_t tx_65b_127b_frames;
- /* Total Number of 65-127 Bytes frames transmitted */
- uint64_t tx_128b_255b_frames;
- /* Total Number of 128-255 Bytes frames transmitted */
- uint64_t tx_256b_511b_frames;
- /* Total Number of 256-511 Bytes frames transmitted */
- uint64_t tx_512b_1023b_frames;
- /* Total Number of 512-1023 Bytes frames transmitted */
- uint64_t tx_1024b_1518_frames;
- /* Total Number of 1024-1518 Bytes frames transmitted */
- uint64_t tx_good_vlan_frames;
+ uint8_t hwrm_fw_min;
/*
- * Total Number of each good VLAN (exludes FCS errors) frame
- * transmitted which is 1519 to 1522 bytes in length inclusive
- * (excluding framing bits but including FCS bytes).
+ * This field represents the minor version of HWRM firmware. A
+ * change in firmware minor version represents significant
+ * firmware functionality changes.
*/
- uint64_t tx_1519b_2047_frames;
- /* Total Number of 1519-2047 Bytes frames transmitted */
- uint64_t tx_2048b_4095b_frames;
- /* Total Number of 2048-4095 Bytes frames transmitted */
- uint64_t tx_4096b_9216b_frames;
- /* Total Number of 4096-9216 Bytes frames transmitted */
- uint64_t tx_9217b_16383b_frames;
- /* Total Number of 9217-16383 Bytes frames transmitted */
- uint64_t tx_good_frames;
- /* Total Number of good frames transmitted */
- uint64_t tx_total_frames;
- /* Total Number of frames transmitted */
- uint64_t tx_ucast_frames;
- /* Total number of unicast frames transmitted */
- uint64_t tx_mcast_frames;
- /* Total number of multicast frames transmitted */
- uint64_t tx_bcast_frames;
- /* Total number of broadcast frames transmitted */
- uint64_t tx_pause_frames;
- /* Total number of PAUSE control frames transmitted */
- uint64_t tx_pfc_frames;
- /* Total number of PFC/per-priority PAUSE control frames transmitted */
- uint64_t tx_jabber_frames;
- /* Total number of jabber frames transmitted */
- uint64_t tx_fcs_err_frames;
- /* Total number of frames transmitted with FCS error */
- uint64_t tx_control_frames;
- /* Total number of control frames transmitted */
- uint64_t tx_oversz_frames;
- /* Total number of over-sized frames transmitted */
- uint64_t tx_single_dfrl_frames;
- /* Total number of frames with single deferral */
- uint64_t tx_multi_dfrl_frames;
- /* Total number of frames with multiple deferrals */
- uint64_t tx_single_coll_frames;
- /* Total number of frames with single collision */
- uint64_t tx_multi_coll_frames;
- /* Total number of frames with multiple collisions */
- uint64_t tx_late_coll_frames;
- /* Total number of frames with late collisions */
- uint64_t tx_excessive_coll_frames;
- /* Total number of frames with excessive collisions */
- uint64_t tx_frag_frames;
- /* Total number of fragmented frames transmitted */
- uint64_t tx_err;
- /* Total number of transmit errors */
- uint64_t tx_tagged_frames;
- /* Total number of single VLAN tagged frames transmitted */
- uint64_t tx_dbl_tagged_frames;
- /* Total number of double VLAN tagged frames transmitted */
- uint64_t tx_runt_frames;
- /* Total number of runt frames transmitted */
- uint64_t tx_fifo_underruns;
- /* Total number of TX FIFO under runs */
- uint64_t tx_pfc_ena_frames_pri0;
+ uint8_t hwrm_fw_bld;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 0
- * transmitted
+ * This field represents the build version of HWRM firmware. A
+ * change in firmware build version represents bug fixes to a
+ * released firmware.
*/
- uint64_t tx_pfc_ena_frames_pri1;
+ uint8_t hwrm_fw_rsvd;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 1
- * transmitted
+ * This field is a reserved field. This field can be used to
+ * represent firmware branches or customer specific releases
+ * tied to a specific (major,minor,update) version of the HWRM
+ * firmware.
*/
- uint64_t tx_pfc_ena_frames_pri2;
+ uint8_t mgmt_fw_maj;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 2
- * transmitted
+ * This field represents the major version of mgmt firmware. A
+ * change in major version represents a major release.
*/
- uint64_t tx_pfc_ena_frames_pri3;
+ uint8_t mgmt_fw_min;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 3
- * transmitted
+ * This field represents the minor version of mgmt firmware. A
+ * change in minor version represents significant functionality
+ * changes.
*/
- uint64_t tx_pfc_ena_frames_pri4;
+ uint8_t mgmt_fw_bld;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 4
- * transmitted
+ * This field represents the build version of mgmt firmware. A
+ * change in update version represents bug fixes.
*/
- uint64_t tx_pfc_ena_frames_pri5;
+ uint8_t mgmt_fw_rsvd;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 5
- * transmitted
+ * This field is a reserved field. This field can be used to
+ * represent firmware branches or customer specific releases
+ * tied to a specific (major,minor,update) version
*/
- uint64_t tx_pfc_ena_frames_pri6;
+ uint8_t netctrl_fw_maj;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 6
- * transmitted
+ * This field represents the major version of network control
+ * firmware. A change in major version represents a major
+ * release.
*/
- uint64_t tx_pfc_ena_frames_pri7;
+ uint8_t netctrl_fw_min;
/*
- * Total number of PFC frames with PFC enabled bit for Pri 7
- * transmitted
+ * This field represents the minor version of network control
+ * firmware. A change in minor version represents significant
+ * functionality changes.
*/
- uint64_t tx_eee_lpi_events;
- /* Total number of EEE LPI Events on TX */
- uint64_t tx_eee_lpi_duration;
- /* EEE LPI Duration Counter on TX */
- uint64_t tx_llfc_logical_msgs;
+ uint8_t netctrl_fw_bld;
/*
- * Total number of Link Level Flow Control (LLFC) messages
- * transmitted
+ * This field represents the build version of network control
+ * firmware. A change in update version represents bug fixes.
*/
- uint64_t tx_hcfc_msgs;
- /* Total number of HCFC messages transmitted */
- uint64_t tx_total_collisions;
- /* Total number of TX collisions */
- uint64_t tx_bytes;
- /* Total number of transmitted bytes */
- uint64_t tx_xthol_frames;
- /* Total number of end-to-end HOL frames */
- uint64_t tx_stat_discard;
- /* Total Tx Drops per Port reported by STATS block */
- uint64_t tx_stat_error;
- /* Total Tx Error Drops per Port reported by STATS block */
-} __attribute__((packed));
-
-/* Port Rx Statistics Formats (528 bytes) */
-struct rx_port_stats {
- uint64_t rx_64b_frames;
- /* Total Number of 64 Bytes frames received */
- uint64_t rx_65b_127b_frames;
- /* Total Number of 65-127 Bytes frames received */
- uint64_t rx_128b_255b_frames;
- /* Total Number of 128-255 Bytes frames received */
- uint64_t rx_256b_511b_frames;
- /* Total Number of 256-511 Bytes frames received */
- uint64_t rx_512b_1023b_frames;
- /* Total Number of 512-1023 Bytes frames received */
- uint64_t rx_1024b_1518_frames;
- /* Total Number of 1024-1518 Bytes frames received */
- uint64_t rx_good_vlan_frames;
+ uint8_t netctrl_fw_rsvd;
/*
- * Total Number of each good VLAN (exludes FCS errors) frame
- * received which is 1519 to 1522 bytes in length inclusive
- * (excluding framing bits but including FCS bytes).
+ * This field is a reserved field. This field can be used to
+ * represent firmware branches or customer specific releases
+ * tied to a specific (major,minor,update) version
*/
- uint64_t rx_1519b_2047b_frames;
- /* Total Number of 1519-2047 Bytes frames received */
- uint64_t rx_2048b_4095b_frames;
- /* Total Number of 2048-4095 Bytes frames received */
- uint64_t rx_4096b_9216b_frames;
- /* Total Number of 4096-9216 Bytes frames received */
- uint64_t rx_9217b_16383b_frames;
- /* Total Number of 9217-16383 Bytes frames received */
- uint64_t rx_total_frames;
- /* Total number of frames received */
- uint64_t rx_ucast_frames;
- /* Total number of unicast frames received */
- uint64_t rx_mcast_frames;
- /* Total number of multicast frames received */
- uint64_t rx_bcast_frames;
- /* Total number of broadcast frames received */
- uint64_t rx_fcs_err_frames;
- /* Total number of received frames with FCS error */
- uint64_t rx_ctrl_frames;
- /* Total number of control frames received */
- uint64_t rx_pause_frames;
- /* Total number of PAUSE frames received */
- uint64_t rx_pfc_frames;
- /* Total number of PFC frames received */
- uint64_t rx_unsupported_opcode_frames;
- /* Total number of frames received with an unsupported opcode */
- uint64_t rx_unsupported_da_pausepfc_frames;
+ uint32_t dev_caps_cfg;
/*
- * Total number of frames received with an unsupported DA for
- * pause and PFC
+ * This field is used to indicate device's capabilities and
+ * configurations.
*/
- uint64_t rx_wrong_sa_frames;
- /* Total number of frames received with an unsupported SA */
- uint64_t rx_align_err_frames;
- /* Total number of received packets with alignment error */
- uint64_t rx_oor_len_frames;
- /* Total number of received frames with out-of-range length */
- uint64_t rx_code_err_frames;
- /* Total number of received frames with error termination */
- uint64_t rx_false_carrier_frames;
/*
- * Total number of received frames with a false carrier is
- * detected during idle, as defined by RX_ER samples active and
- * RXD is 0xE. The event is reported along with the statistics
- * generated on the next received frame. Only one false carrier
- * condition can be detected and logged between frames. Carrier
- * event, valid for 10M/100M speed modes only.
+ * If set to 1, then secure firmware update behavior is
+ * supported. If set to 0, then secure firmware update behavior
+ * is not supported.
*/
- uint64_t rx_ovrsz_frames;
- /* Total number of over-sized frames received */
- uint64_t rx_jbr_frames;
- /* Total number of jabber packets received */
- uint64_t rx_mtu_err_frames;
- /* Total number of received frames with MTU error */
- uint64_t rx_match_crc_frames;
- /* Total number of received frames with CRC match */
- uint64_t rx_promiscuous_frames;
- /* Total number of frames received promiscuously */
- uint64_t rx_tagged_frames;
- /* Total number of received frames with one or two VLAN tags */
- uint64_t rx_double_tagged_frames;
- /* Total number of received frames with two VLAN tags */
- uint64_t rx_trunc_frames;
- /* Total number of truncated frames received */
- uint64_t rx_good_frames;
- /* Total number of good frames (without errors) received */
- uint64_t rx_pfc_xon2xoff_frames_pri0;
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED \
+ UINT32_C(0x1)
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 0
+ * If set to 1, then firmware based DCBX agent is supported. If
+ * set to 0, then firmware based DCBX agent capability is not
+ * supported on this device.
*/
- uint64_t rx_pfc_xon2xoff_frames_pri1;
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED \
+ UINT32_C(0x2)
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 1
+ * If set to 1, then HWRM short command format is supported. If
+ * set to 0, then HWRM short command format is not supported.
*/
- uint64_t rx_pfc_xon2xoff_frames_pri2;
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED \
+ UINT32_C(0x4)
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 2
+ * If set to 1, then HWRM short command format is required. If
+ * set to 0, then HWRM short command format is not required.
*/
- uint64_t rx_pfc_xon2xoff_frames_pri3;
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_INPUTUIRED \
+ UINT32_C(0x8)
+ uint8_t roce_fw_maj;
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 3
+ * This field represents the major version of RoCE firmware. A
+ * change in major version represents a major release.
*/
- uint64_t rx_pfc_xon2xoff_frames_pri4;
+ uint8_t roce_fw_min;
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 4
+ * This field represents the minor version of RoCE firmware. A
+ * change in minor version represents significant functionality
+ * changes.
*/
- uint64_t rx_pfc_xon2xoff_frames_pri5;
+ uint8_t roce_fw_bld;
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 5
+ * This field represents the build version of RoCE firmware. A
+ * change in update version represents bug fixes.
*/
- uint64_t rx_pfc_xon2xoff_frames_pri6;
+ uint8_t roce_fw_rsvd;
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 6
+ * This field is a reserved field. This field can be used to
+ * represent firmware branches or customer specific releases
+ * tied to a specific (major,minor,update) version
*/
- uint64_t rx_pfc_xon2xoff_frames_pri7;
+ char hwrm_fw_name[16];
/*
- * Total number of received PFC frames with transition from XON
- * to XOFF on Pri 7
+ * This field represents the name of HWRM FW (ASCII chars with
+ * NULL at the end).
*/
- uint64_t rx_pfc_ena_frames_pri0;
+ char mgmt_fw_name[16];
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 0
+ * This field represents the name of mgmt FW (ASCII chars with
+ * NULL at the end).
*/
- uint64_t rx_pfc_ena_frames_pri1;
+ char netctrl_fw_name[16];
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 1
+ * This field represents the name of network control firmware
+ * (ASCII chars with NULL at the end).
*/
- uint64_t rx_pfc_ena_frames_pri2;
+ uint32_t reserved2[4];
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 2
+ * This field is reserved for future use. The responder should
+ * set it to 0. The requester should ignore this field.
*/
- uint64_t rx_pfc_ena_frames_pri3;
+ char roce_fw_name[16];
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 3
+ * This field represents the name of RoCE FW (ASCII chars with
+ * NULL at the end).
*/
- uint64_t rx_pfc_ena_frames_pri4;
+ uint16_t chip_num;
+ /* This field returns the chip number. */
+ uint8_t chip_rev;
+ /* This field returns the revision of chip. */
+ uint8_t chip_metal;
+ /* This field returns the chip metal number. */
+ uint8_t chip_bond_id;
+ /* This field returns the bond id of the chip. */
+ uint8_t chip_platform_type;
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 4
+ * This value indicates the type of platform used for chip
+ * implementation.
*/
- uint64_t rx_pfc_ena_frames_pri5;
+ /* ASIC */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC UINT32_C(0x0)
+ /* FPGA platform of the chip. */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA UINT32_C(0x1)
+ /* Palladium platform of the chip. */
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2)
+ uint16_t max_req_win_len;
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 5
+ * This field returns the maximum value of request window that
+ * is supported by the HWRM. The request window is mapped into
+ * device address space using MMIO.
*/
- uint64_t rx_pfc_ena_frames_pri6;
+ uint16_t max_resp_len;
+ /* This field returns the maximum value of response buffer in bytes. */
+ uint16_t def_req_timeout;
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 6
+ * This field returns the default request timeout value in
+ * milliseconds.
*/
- uint64_t rx_pfc_ena_frames_pri7;
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
/*
- * Total number of received PFC frames with PFC enabled bit for
- * Pri 7
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint64_t rx_sch_crc_err_frames;
- /* Total Number of frames received with SCH CRC error */
- uint64_t rx_undrsz_frames;
- /* Total Number of under-sized frames received */
- uint64_t rx_frag_frames;
- /* Total Number of fragmented frames received */
- uint64_t rx_eee_lpi_events;
- /* Total number of RX EEE LPI Events */
- uint64_t rx_eee_lpi_duration;
- /* EEE LPI Duration Counter on RX */
- uint64_t rx_llfc_physical_msgs;
+} __attribute__((packed));
+
+/* hwrm_func_reset */
+/*
+ * Description: This command resets a hardware function (PCIe function) and
+ * frees any resources used by the function. This command shall be initiated by
+ * the driver after an FLR has occurred to prepare the function for re-use. This
+ * command may also be initiated by a driver prior to doing it's own
+ * configuration. This command puts the function into the reset state. In the
+ * reset state, global and port related features of the chip are not available.
+ */
+/*
+ * Note: This command will reset a function that has already been disabled or
+ * idled. The command returns all the resources owned by the function so a new
+ * driver may allocate and configure resources normally.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_reset_input {
+ uint16_t req_type;
/*
- * Total number of physical type Link Level Flow Control (LLFC)
- * messages received
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- uint64_t rx_llfc_logical_msgs;
- /*
- * Total number of logical type Link Level Flow Control (LLFC)
- * messages received
- */
- uint64_t rx_llfc_msgs_with_crc_err;
- /*
- * Total number of logical type Link Level Flow Control (LLFC)
- * messages received with CRC error
- */
- uint64_t rx_hcfc_msgs;
- /* Total number of HCFC messages received */
- uint64_t rx_hcfc_msgs_with_crc_err;
- /* Total number of HCFC messages received with CRC error */
- uint64_t rx_bytes;
- /* Total number of received bytes */
- uint64_t rx_runt_bytes;
- /* Total number of bytes received in runt frames */
- uint64_t rx_runt_frames;
- /* Total number of runt frames received */
- uint64_t rx_stat_discard;
- /* Total Rx Discards per Port reported by STATS block */
- uint64_t rx_stat_err;
- /* Total Rx Error Drops per Port reported by STATS block */
-} __attribute__((packed));
-
-/* hwrm_ver_get */
-/*
- * Description: This function is called by a driver to determine the HWRM
- * interface version supported by the HWRM firmware, the version of HWRM
- * firmware implementation, the name of HWRM firmware, the versions of other
- * embedded firmwares, and the names of other embedded firmwares, etc. Any
- * interface or firmware version with major = 0, minor = 0, and update = 0 shall
- * be considered an invalid version.
- */
-/* Input (24 bytes) */
-struct hwrm_ver_get_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
+ uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
@@ -1747,37 +1634,48 @@ struct hwrm_ver_get_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint8_t hwrm_intf_maj;
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id_valid field to be configured. */
+ #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ uint16_t vf_id;
/*
- * This field represents the major version of HWRM interface
- * specification supported by the driver HWRM implementation.
- * The interface major version is intended to change only when
- * non backward compatible changes are made to the HWRM
- * interface specification.
+ * The ID of the VF that this PF is trying to reset. Only the
+ * parent PF shall be allowed to reset a child VF. A parent PF
+ * driver shall use this field only when a specific child VF is
+ * requested to be reset.
*/
- uint8_t hwrm_intf_min;
+ uint8_t func_reset_level;
+ /* This value indicates the level of a function reset. */
/*
- * This field represents the minor version of HWRM interface
- * specification supported by the driver HWRM implementation. A
- * change in interface minor version is used to reflect
- * significant backward compatible modification to HWRM
- * interface specification. This can be due to addition or
- * removal of functionality. HWRM interface specifications with
- * the same major version but different minor versions are
- * compatible.
+ * Reset the caller function and its children
+ * VFs (if any). If no children functions exist,
+ * then reset the caller function only.
*/
- uint8_t hwrm_intf_upd;
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL UINT32_C(0x0)
+ /* Reset the caller function only */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME UINT32_C(0x1)
/*
- * This field represents the update version of HWRM interface
- * specification supported by the driver HWRM implementation.
- * The interface update version is used to reflect minor changes
- * or bug fixes to a released HWRM interface specification.
+ * Reset all children VFs of the caller function
+ * driver if the caller is a PF driver. It is an
+ * error to specify this level by a VF driver.
+ * It is an error to specify this level by a PF
+ * driver with no children VFs.
*/
- uint8_t unused_0[5];
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN UINT32_C(0x2)
+ /*
+ * Reset a specific VF of the caller function
+ * driver if the caller is the parent PF driver.
+ * It is an error to specify this level by a VF
+ * driver. It is an error to specify this level
+ * by a PF driver that is not the parent of the
+ * VF that is being requested to reset.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF UINT32_C(0x3)
+ uint8_t unused_0;
} __attribute__((packed));
-/* Output (128 bytes) */
-struct hwrm_ver_get_output {
+/* Output (16 bytes) */
+struct hwrm_func_reset_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -1793,311 +1691,305 @@ struct hwrm_ver_get_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint8_t hwrm_intf_maj;
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
/*
- * This field represents the major version of HWRM interface
- * specification supported by the HWRM implementation. The
- * interface major version is intended to change only when non
- * backward compatible changes are made to the HWRM interface
- * specification. A HWRM implementation that is compliant with
- * this specification shall provide value of 1 in this field.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t hwrm_intf_min;
+} __attribute__((packed));
+
+/* hwrm_func_qcaps */
+/*
+ * Description: This command returns capabilities of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The output FID value is needed to configure Rings and
+ * MSI-X vectors so their DMA operations appear correctly on the PCI bus.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_qcaps_input {
+ uint16_t req_type;
/*
- * This field represents the minor version of HWRM interface
- * specification supported by the HWRM implementation. A change
- * in interface minor version is used to reflect significant
- * backward compatible modification to HWRM interface
- * specification. This can be due to addition or removal of
- * functionality. HWRM interface specifications with the same
- * major version but different minor versions are compatible. A
- * HWRM implementation that is compliant with this specification
- * shall provide value of 2 in this field.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- uint8_t hwrm_intf_upd;
+ uint16_t cmpl_ring;
/*
- * This field represents the update version of HWRM interface
- * specification supported by the HWRM implementation. The
- * interface update version is used to reflect minor changes or
- * bug fixes to a released HWRM interface specification. A HWRM
- * implementation that is compliant with this specification
- * shall provide value of 2 in this field.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- uint8_t hwrm_intf_rsvd;
- uint8_t hwrm_fw_maj;
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * This field represents the major version of HWRM firmware. A
- * change in firmware major version represents a major firmware
- * release.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- uint8_t hwrm_fw_min;
+ uint64_t resp_addr;
/*
- * This field represents the minor version of HWRM firmware. A
- * change in firmware minor version represents significant
- * firmware functionality changes.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- uint8_t hwrm_fw_bld;
+ uint16_t fid;
/*
- * This field represents the build version of HWRM firmware. A
- * change in firmware build version represents bug fixes to a
- * released firmware.
+ * Function ID of the function that is being queried. 0xFF...
+ * (All Fs) if the query is for the requesting function.
*/
- uint8_t hwrm_fw_rsvd;
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (80 bytes) */
+struct hwrm_func_qcaps_output {
+ uint16_t error_code;
/*
- * This field is a reserved field. This field can be used to
- * represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version of the HWRM
- * firmware.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint8_t mgmt_fw_maj;
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * This field represents the major version of mgmt firmware. A
- * change in major version represents a major release.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- uint8_t mgmt_fw_min;
+ uint16_t fid;
/*
- * This field represents the minor version of mgmt firmware. A
- * change in minor version represents significant functionality
- * changes.
+ * FID value. This value is used to identify operations on the
+ * PCI bus as belonging to a particular PCI function.
*/
- uint8_t mgmt_fw_bld;
+ uint16_t port_id;
/*
- * This field represents the build version of mgmt firmware. A
- * change in update version represents bug fixes.
+ * Port ID of port that this function is associated with. Valid
+ * only for the PF. 0xFF... (All Fs) if this function is not
+ * associated with any port. 0xFF... (All Fs) if this function
+ * is called from a VF.
*/
- uint8_t mgmt_fw_rsvd;
+ uint32_t flags;
+ /* If 1, then Push mode is supported on this function. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
/*
- * This field is a reserved field. This field can be used to
- * represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version
+ * If 1, then the global MSI-X auto-masking is enabled for the
+ * device.
*/
- uint8_t netctrl_fw_maj;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \
+ UINT32_C(0x2)
/*
- * This field represents the major version of network control
- * firmware. A change in major version represents a major
- * release.
+ * If 1, then the Precision Time Protocol (PTP) processing is
+ * supported on this function. The HWRM should enable PTP on
+ * only a single Physical Function (PF) per port.
*/
- uint8_t netctrl_fw_min;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
/*
- * This field represents the minor version of network control
- * firmware. A change in minor version represents significant
- * functionality changes.
+ * If 1, then RDMA over Converged Ethernet (RoCE) v1 is
+ * supported on this function.
*/
- uint8_t netctrl_fw_bld;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
/*
- * This field represents the build version of network control
- * firmware. A change in update version represents bug fixes.
+ * If 1, then RDMA over Converged Ethernet (RoCE) v2 is
+ * supported on this function.
*/
- uint8_t netctrl_fw_rsvd;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
/*
- * This field is a reserved field. This field can be used to
- * represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version
+ * If 1, then control and configuration of WoL magic packet are
+ * supported on this function.
*/
- uint32_t dev_caps_cfg;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \
+ UINT32_C(0x20)
/*
- * This field is used to indicate device's capabilities and
- * configurations.
+ * If 1, then control and configuration of bitmap pattern packet
+ * are supported on this function.
*/
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
/*
- * If set to 1, then secure firmware update behavior is
- * supported. If set to 0, then secure firmware update behavior
- * is not supported.
+ * If set to 1, then the control and configuration of rate limit
+ * of an allocated TX ring on the queried function is supported.
*/
- #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED UINT32_C(0x1)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80)
/*
- * If set to 1, then firmware based DCBX agent is supported. If
- * set to 0, then firmware based DCBX agent capability is not
- * supported on this device.
+ * If 1, then control and configuration of minimum and maximum
+ * bandwidths are supported on the queried function.
*/
- #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED UINT32_C(0x2)
- uint8_t roce_fw_maj;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100)
/*
- * This field represents the major version of RoCE firmware. A
- * change in major version represents a major release.
+ * If the query is for a VF, then this flag shall be ignored. If
+ * this query is for a PF and this flag is set to 1, then the PF
+ * has the capability to set the rate limits on the TX rings of
+ * its children VFs. If this query is for a PF and this flag is
+ * set to 0, then the PF does not have the capability to set the
+ * rate limits on the TX rings of its children VFs.
*/
- uint8_t roce_fw_min;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \
+ UINT32_C(0x200)
/*
- * This field represents the minor version of RoCE firmware. A
- * change in minor version represents significant functionality
- * changes.
+ * If the query is for a VF, then this flag shall be ignored. If
+ * this query is for a PF and this flag is set to 1, then the PF
+ * has the capability to set the minimum and/or maximum
+ * bandwidths for its children VFs. If this query is for a PF
+ * and this flag is set to 0, then the PF does not have the
+ * capability to set the minimum or maximum bandwidths for its
+ * children VFs.
*/
- uint8_t roce_fw_bld;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400)
/*
- * This field represents the build version of RoCE firmware. A
- * change in update version represents bug fixes.
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then standard TX ring mode is supported on the
+ * queried function. If set to 0, then standard TX ring mode is
+ * not available on the queried function.
*/
- uint8_t roce_fw_rsvd;
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \
+ UINT32_C(0x800)
+ uint8_t mac_address[6];
/*
- * This field is a reserved field. This field can be used to
- * represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version
+ * This value is current MAC address configured for this
+ * function. A value of 00-00-00-00-00-00 indicates no MAC
+ * address is currently configured.
*/
- char hwrm_fw_name[16];
+ uint16_t max_rsscos_ctx;
/*
- * This field represents the name of HWRM FW (ASCII chars with
- * NULL at the end).
+ * The maximum number of RSS/COS contexts that can be allocated
+ * to the function.
*/
- char mgmt_fw_name[16];
+ uint16_t max_cmpl_rings;
/*
- * This field represents the name of mgmt FW (ASCII chars with
- * NULL at the end).
+ * The maximum number of completion rings that can be allocated
+ * to the function.
*/
- char netctrl_fw_name[16];
+ uint16_t max_tx_rings;
/*
- * This field represents the name of network control firmware
- * (ASCII chars with NULL at the end).
+ * The maximum number of transmit rings that can be allocated to
+ * the function.
*/
- uint32_t reserved2[4];
+ uint16_t max_rx_rings;
/*
- * This field is reserved for future use. The responder should
- * set it to 0. The requester should ignore this field.
+ * The maximum number of receive rings that can be allocated to
+ * the function.
*/
- char roce_fw_name[16];
+ uint16_t max_l2_ctxs;
/*
- * This field represents the name of RoCE FW (ASCII chars with
- * NULL at the end).
+ * The maximum number of L2 contexts that can be allocated to
+ * the function.
*/
- uint16_t chip_num;
- /* This field returns the chip number. */
- uint8_t chip_rev;
- /* This field returns the revision of chip. */
- uint8_t chip_metal;
- /* This field returns the chip metal number. */
- uint8_t chip_bond_id;
- /* This field returns the bond id of the chip. */
- uint8_t chip_platform_type;
+ uint16_t max_vnics;
/*
- * This value indicates the type of platform used for chip
- * implementation.
+ * The maximum number of VNICs that can be allocated to the
+ * function.
*/
- /* ASIC */
- #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC UINT32_C(0x0)
- /* FPGA platform of the chip. */
- #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA UINT32_C(0x1)
- /* Palladium platform of the chip. */
- #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2)
- uint16_t max_req_win_len;
+ uint16_t first_vf_id;
/*
- * This field returns the maximum value of request window that
- * is supported by the HWRM. The request window is mapped into
- * device address space using MMIO.
+ * The identifier for the first VF enabled on a PF. This is
+ * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
+ * this command is called on a PF with SR-IOV disabled or on a
+ * VF.
*/
- uint16_t max_resp_len;
- /* This field returns the maximum value of response buffer in bytes. */
- uint16_t def_req_timeout;
+ uint16_t max_vfs;
/*
- * This field returns the default request timeout value in
- * milliseconds.
+ * The maximum number of VFs that can be allocated to the
+ * function. This is valid only on the PF with SR-IOV enabled.
+ * 0xFF... (All Fs) if this command is called on a PF with SR-
+ * IOV disabled or on a VF.
*/
- uint8_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t valid;
+ uint16_t max_stat_ctx;
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
+ * The maximum number of statistic contexts that can be
+ * allocated to the function.
*/
-} __attribute__((packed));
-
-/* hwrm_func_buf_unrgtr */
-/*
- * Description: This command is used by the PF driver to unregister buffers used
- * in the PF-VF communication with the HWRM. The PF driver uses this command to
- * unregister buffers for PF-VF communication. A parent PF may issue this
- * command to unregister buffers for communication between the PF and a specific
- * VF. If the VF ID is not valid, then this command is used to unregister
- * buffers used for communications with all children VFs of the PF.
- */
-/* Input (24 bytes) */
-struct hwrm_func_buf_unrgtr_input {
- uint16_t req_type;
+ uint32_t max_encap_records;
/*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
+ * The maximum number of Encapsulation records that can be
+ * offloaded by this function.
*/
- uint16_t cmpl_ring;
+ uint32_t max_decap_records;
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * The maximum number of decapsulation records that can be
+ * offloaded by this function.
*/
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
+ uint32_t max_tx_em_flows;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * The maximum number of Exact Match (EM) flows that can be
+ * offloaded by this function on the TX side.
*/
- uint64_t resp_addr;
+ uint32_t max_tx_wm_flows;
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * The maximum number of Wildcard Match (WM) flows that can be
+ * offloaded by this function on the TX side.
*/
- uint32_t enables;
- /* This bit must be '1' for the vf_id field to be configured. */
- #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID (UINT32_C(0x1))
- uint16_t vf_id;
+ uint32_t max_rx_em_flows;
/*
- * This value is used to identify a Virtual Function (VF). The scope of
- * VF ID is local within a PF.
+ * The maximum number of Exact Match (EM) flows that can be
+ * offloaded by this function on the RX side.
*/
- uint16_t unused_0;
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_func_buf_unrgtr_output {
- uint16_t error_code;
+ uint32_t max_rx_wm_flows;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * The maximum number of Wildcard Match (WM) flows that can be
+ * offloaded by this function on the RX side.
*/
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
+ uint32_t max_mcast_filters;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * The maximum number of multicast filters that can be supported
+ * by this function on the RX side.
*/
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
+ uint32_t max_flow_id;
+ /*
+ * The maximum value of flow_id that can be supported in
+ * completion records.
+ */
+ uint32_t max_hw_ring_grps;
+ /*
+ * The maximum number of HW ring groups that can be supported on
+ * this function.
+ */
+ uint16_t max_sp_tx_rings;
+ /*
+ * The maximum number of strict priority transmit rings that can
+ * be allocated to the function. This number indicates the
+ * maximum number of TX rings that can be assigned strict
+ * priorities out of the maximum number of TX rings that can be
+ * allocated (max_tx_rings) to the function.
+ */
+ uint8_t unused_0;
uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
} __attribute__((packed));
-/* hwrm_func_reset */
-/*
- * Description: This command resets a hardware function (PCIe function) and
- * frees any resources used by the function. This command shall be initiated by
- * the driver after an FLR has occurred to prepare the function for re-use. This
- * command may also be initiated by a driver prior to doing it's own
- * configuration. This command puts the function into the reset state. In the
- * reset state, global and port related features of the chip are not available.
- */
+/* hwrm_func_qcfg */
/*
- * Note: This command will reset a function that has already been disabled or
- * idled. The command returns all the resources owned by the function so a new
- * driver may allocate and configure resources normally.
+ * Description: This command returns the current configuration of a function.
+ * The input FID value is used to indicate what function is being queried. This
+ * allows a physical function driver to query virtual functions that are
+ * children of the physical function. The output FID value is needed to
+ * configure Rings and MSI-X vectors so their DMA operations appear correctly on
+ * the PCI bus. This command should be called by every driver after
+ * 'hwrm_func_cfg' to get the actual number of resources allocated by the HWRM.
+ * The values returned by hwrm_func_qcfg are the values the driver shall use.
+ * These values may be different than what was originally requested in the
+ * 'hwrm_func_cfg' command.
*/
-/* Input (24 bytes) */
-struct hwrm_func_reset_input {
+/* Input (24 bytes) */
+struct hwrm_func_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -2124,48 +2016,16 @@ struct hwrm_func_reset_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t enables;
- /* This bit must be '1' for the vf_id_valid field to be configured. */
- #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
- uint16_t vf_id;
- /*
- * The ID of the VF that this PF is trying to reset. Only the
- * parent PF shall be allowed to reset a child VF. A parent PF
- * driver shall use this field only when a specific child VF is
- * requested to be reset.
- */
- uint8_t func_reset_level;
- /* This value indicates the level of a function reset. */
- /*
- * Reset the caller function and its children
- * VFs (if any). If no children functions exist,
- * then reset the caller function only.
- */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL UINT32_C(0x0)
- /* Reset the caller function only */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME UINT32_C(0x1)
- /*
- * Reset all children VFs of the caller function
- * driver if the caller is a PF driver. It is an
- * error to specify this level by a VF driver.
- * It is an error to specify this level by a PF
- * driver with no children VFs.
- */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN UINT32_C(0x2)
+ uint16_t fid;
/*
- * Reset a specific VF of the caller function
- * driver if the caller is the parent PF driver.
- * It is an error to specify this level by a VF
- * driver. It is an error to specify this level
- * by a PF driver that is not the parent of the
- * VF that is being requested to reset.
+ * Function ID of the function that is being queried. 0xFF...
+ * (All Fs) if the query is for the requesting function.
*/
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF UINT32_C(0x3)
- uint8_t unused_0;
+ uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_func_reset_output {
+/* Output (72 bytes) */
+struct hwrm_func_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -2181,288 +2041,294 @@ struct hwrm_func_reset_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
+ uint16_t fid;
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
- */
-} __attribute__((packed));
-
-/* hwrm_func_qcaps */
-/*
- * Description: This command returns capabilities of a function. The input FID
- * value is used to indicate what function is being queried. This allows a
- * physical function driver to query virtual functions that are children of the
- * physical function. The output FID value is needed to configure Rings and
- * MSI-X vectors so their DMA operations appear correctly on the PCI bus.
- */
-/* Input (24 bytes) */
-struct hwrm_func_qcaps_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
+ * FID value. This value is used to identify operations on the
+ * PCI bus as belonging to a particular PCI function.
*/
- uint16_t cmpl_ring;
+ uint16_t port_id;
/*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
+ * Port ID of port that this function is associated with.
+ * 0xFF... (All Fs) if this function is not associated with any
+ * port.
*/
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
+ uint16_t vlan;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
+ * This value is the current VLAN setting for this function. The
+ * value of 0 for this field indicates no priority tagging or
+ * VLAN is used. This field's format is same as 802.1Q Tag's Tag
+ * Control Information (TCI) format that includes both Priority
+ * Code Point (PCP) and VLAN Identifier (VID).
*/
- uint64_t resp_addr;
+ uint16_t flags;
/*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
+ * If 1, then magic packet based Out-Of-Box WoL is enabled on
+ * the port associated with this function.
*/
- uint16_t fid;
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \
+ UINT32_C(0x1)
/*
- * Function ID of the function that is being queried. 0xFF...
- * (All Fs) if the query is for the requesting function.
+ * If 1, then bitmap pattern based Out-Of-Box WoL packet is
+ * enabled on the port associated with this function.
*/
- uint16_t unused_0[3];
-} __attribute__((packed));
-
-/* Output (80 bytes) */
-struct hwrm_func_qcaps_output {
- uint16_t error_code;
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED UINT32_C(0x2)
/*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
+ * If set to 1, then FW based DCBX agent is enabled and running
+ * on the port associated with this function. If set to 0, then
+ * DCBX agent is not running in the firmware.
*/
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED UINT32_C(0x4)
/*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
- */
- uint16_t fid;
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then standard TX ring mode is enabled on the
+ * queried function. If set to 0, then the standard TX ring mode
+ * is disabled on the queried function. In this extended TX ring
+ * resource mode, the minimum and maximum bandwidth settings are
+ * not supported to allow the allocation of TX rings to span
+ * multiple scheduler nodes.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \
+ UINT32_C(0x8)
/*
- * FID value. This value is used to identify operations on the
- * PCI bus as belonging to a particular PCI function.
+ * If set to 1 then FW based LLDP agent is enabled and running
+ * on the port associated with this function. If set to 0 then
+ * the LLDP agent is not running in the firmware.
*/
- uint16_t port_id;
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED UINT32_C(0x10)
+ uint8_t mac_address[6];
/*
- * Port ID of port that this function is associated with. Valid
- * only for the PF. 0xFF... (All Fs) if this function is not
- * associated with any port. 0xFF... (All Fs) if this function
- * is called from a VF.
+ * This value is current MAC address configured for this
+ * function. A value of 00-00-00-00-00-00 indicates no MAC
+ * address is currently configured.
*/
- uint32_t flags;
- /* If 1, then Push mode is supported on this function. */
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
+ uint16_t pci_id;
/*
- * If 1, then the global MSI-X auto-masking is enabled for the
- * device.
+ * This value is current PCI ID of this function. If ARI is
+ * enabled, then it is Bus Number (8b):Function Number(8b).
+ * Otherwise, it is Bus Number (8b):Device Number (4b):Function
+ * Number(4b).
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING UINT32_C(0x2)
+ uint16_t alloc_rsscos_ctx;
/*
- * If 1, then the Precision Time Protocol (PTP) processing is
- * supported on this function. The HWRM should enable PTP on
- * only a single Physical Function (PF) per port.
+ * The number of RSS/COS contexts currently allocated to the
+ * function.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
+ uint16_t alloc_cmpl_rings;
/*
- * If 1, then RDMA over Converged Ethernet (RoCE) v1 is
- * supported on this function.
+ * The number of completion rings currently allocated to the
+ * function. This does not include the rings allocated to any
+ * children functions if any.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
+ uint16_t alloc_tx_rings;
/*
- * If 1, then RDMA over Converged Ethernet (RoCE) v2 is
- * supported on this function.
+ * The number of transmit rings currently allocated to the
+ * function. This does not include the rings allocated to any
+ * children functions if any.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
+ uint16_t alloc_rx_rings;
/*
- * If 1, then control and configuration of WoL magic packet are
- * supported on this function.
+ * The number of receive rings currently allocated to the
+ * function. This does not include the rings allocated to any
+ * children functions if any.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED UINT32_C(0x20)
+ uint16_t alloc_l2_ctx;
+ /* The allocated number of L2 contexts to the function. */
+ uint16_t alloc_vnics;
+ /* The allocated number of vnics to the function. */
+ uint16_t mtu;
/*
- * If 1, then control and configuration of bitmap pattern packet
- * are supported on this function.
+ * The maximum transmission unit of the function. For rings
+ * allocated on this function, this default value is used if
+ * ring MTU is not specified.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
+ uint16_t mru;
/*
- * If set to 1, then the control and configuration of rate limit
- * of an allocated TX ring on the queried function is supported.
+ * The maximum receive unit of the function. For vnics allocated
+ * on this function, this default value is used if vnic MRU is
+ * not specified.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80)
+ uint16_t stat_ctx_id;
+ /* The statistics context assigned to a function. */
+ uint8_t port_partition_type;
/*
- * If 1, then control and configuration of minimum and maximum
- * bandwidths are supported on the queried function.
+ * The HWRM shall return Unknown value for this field when this
+ * command is used to query VF's configuration.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100)
+ /* Single physical function */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0)
+ /* Multiple physical functions */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1)
+ /* Network Partitioning 1.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2)
+ /* Network Partitioning 1.5 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
+ /* Network Partitioning 2.0 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
+ /* Unknown */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN UINT32_C(0xff)
+ uint8_t unused_0;
+ uint16_t dflt_vnic_id;
+ /* The default VNIC ID assigned to a function that is being queried. */
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint32_t min_bw;
/*
- * If the query is for a VF, then this flag shall be ignored. If
- * this query is for a PF and this flag is set to 1, then the PF
- * has the capability to set the rate limits on the TX rings of
- * its children VFs. If this query is for a PF and this flag is
- * set to 0, then the PF does not have the capability to set the
- * rate limits on the TX rings of its children VFs.
+ * Minimum BW allocated for this function. The HWRM will
+ * translate this value into byte counter and time interval used
+ * for the scheduler inside the device. A value of 0 indicates
+ * the minimum bandwidth is not configured.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED UINT32_C(0x200)
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \
+ FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
+ FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
+ uint32_t max_bw;
/*
- * If the query is for a VF, then this flag shall be ignored. If
- * this query is for a PF and this flag is set to 1, then the PF
- * has the capability to set the minimum and/or maximum
- * bandwidths for its children VFs. If this query is for a PF
- * and this flag is set to 0, then the PF does not have the
- * capability to set the minimum or maximum bandwidths for its
- * children VFs.
+ * Maximum BW allocated for this function. The HWRM will
+ * translate this value into byte counter and time interval used
+ * for the scheduler inside the device. A value of 0 indicates
+ * that the maximum bandwidth is not configured.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400)
- uint8_t mac_address[6];
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \
+ FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ uint8_t evb_mode;
/*
- * This value is current MAC address configured for this
- * function. A value of 00-00-00-00-00-00 indicates no MAC
- * address is currently configured.
+ * This value indicates the Edge virtual bridge mode for the
+ * domain that this function belongs to.
*/
- uint16_t max_rsscos_ctx;
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ uint8_t unused_3;
+ uint16_t alloc_vfs;
/*
- * The maximum number of RSS/COS contexts that can be allocated
- * to the function.
+ * The number of VFs that are allocated to the function. This is
+ * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
+ * this command is called on a PF with SR-IOV disabled or on a
+ * VF.
*/
- uint16_t max_cmpl_rings;
+ uint32_t alloc_mcast_filters;
/*
- * The maximum number of completion rings that can be allocated
- * to the function.
+ * The number of allocated multicast filters for this function
+ * on the RX side.
*/
- uint16_t max_tx_rings;
+ uint32_t alloc_hw_ring_grps;
+ /* The number of allocated HW ring groups for this function. */
+ uint16_t alloc_sp_tx_rings;
/*
- * The maximum number of transmit rings that can be allocated to
- * the function.
+ * The number of strict priority transmit rings out of currently
+ * allocated TX rings to the function (alloc_tx_rings).
*/
- uint16_t max_rx_rings;
+ uint8_t unused_4;
+ uint8_t valid;
/*
- * The maximum number of receive rings that can be allocated to
- * the function.
- */
- uint16_t max_l2_ctxs;
- /*
- * The maximum number of L2 contexts that can be allocated to
- * the function.
- */
- uint16_t max_vnics;
- /*
- * The maximum number of VNICs that can be allocated to the
- * function.
- */
- uint16_t first_vf_id;
- /*
- * The identifier for the first VF enabled on a PF. This is
- * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
- * this command is called on a PF with SR-IOV disabled or on a
- * VF.
- */
- uint16_t max_vfs;
- /*
- * The maximum number of VFs that can be allocated to the
- * function. This is valid only on the PF with SR-IOV enabled.
- * 0xFF... (All Fs) if this command is called on a PF with SR-
- * IOV disabled or on a VF.
- */
- uint16_t max_stat_ctx;
- /*
- * The maximum number of statistic contexts that can be
- * allocated to the function.
- */
- uint32_t max_encap_records;
- /*
- * The maximum number of Encapsulation records that can be
- * offloaded by this function.
- */
- uint32_t max_decap_records;
- /*
- * The maximum number of decapsulation records that can be
- * offloaded by this function.
- */
- uint32_t max_tx_em_flows;
- /*
- * The maximum number of Exact Match (EM) flows that can be
- * offloaded by this function on the TX side.
- */
- uint32_t max_tx_wm_flows;
- /*
- * The maximum number of Wildcard Match (WM) flows that can be
- * offloaded by this function on the TX side.
- */
- uint32_t max_rx_em_flows;
- /*
- * The maximum number of Exact Match (EM) flows that can be
- * offloaded by this function on the RX side.
- */
- uint32_t max_rx_wm_flows;
- /*
- * The maximum number of Wildcard Match (WM) flows that can be
- * offloaded by this function on the RX side.
- */
- uint32_t max_mcast_filters;
- /*
- * The maximum number of multicast filters that can be supported
- * by this function on the RX side.
- */
- uint32_t max_flow_id;
- /*
- * The maximum value of flow_id that can be supported in
- * completion records.
- */
- uint32_t max_hw_ring_grps;
- /*
- * The maximum number of HW ring groups that can be supported on
- * this function.
- */
- uint16_t max_sp_tx_rings;
- /*
- * The maximum number of strict priority transmit rings that can
- * be allocated to the function. This number indicates the
- * maximum number of TX rings that can be assigned strict
- * priorities out of the maximum number of TX rings that can be
- * allocated (max_tx_rings) to the function.
- */
- uint8_t unused_0;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
} __attribute__((packed));
-/* hwrm_func_qcfg */
+/* hwrm_func_cfg */
/*
- * Description: This command returns the current configuration of a function.
- * The input FID value is used to indicate what function is being queried. This
- * allows a physical function driver to query virtual functions that are
- * children of the physical function. The output FID value is needed to
- * configure Rings and MSI-X vectors so their DMA operations appear correctly on
- * the PCI bus.
+ * Description: This command allows configuration of a PF by the corresponding
+ * PF driver. This command also allows configuration of a child VF by its parent
+ * PF driver. The input FID value is used to indicate what function is being
+ * configured. This allows a PF driver to configure the PF owned by itself or a
+ * virtual function that is a child of the PF. This command allows to reserve
+ * resources for a VF by its parent PF. To reverse the process, the command
+ * should be called with all enables flags cleared for resources. This will free
+ * allocated resources for the VF and return them to the resource pool. If this
+ * command is requested by a VF driver to configure or reserve resources, then
+ * the HWRM shall fail this command. If default MAC address and/or VLAN are
+ * provided in this command, then the HWRM shall set up appropriate MAC/VLAN
+ * filters for the function that is being configured. If source properties
+ * checks are enabled and default MAC address and/or IP address are provided in
+ * this command, then the HWRM shall set appropriate source property checks
+ * based on provided MAC and/or IP addresses. The parent PF driver should not
+ * set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by
+ * the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the
+ * HWRM should ignore it. A function's MTU/MRU should be set prior to allocating
+ * RX VNICs or TX rings. A PF driver calls hwrm_func_cfg to allocate resources
+ * for itself or its children VFs. All function drivers shall call hwrm_func_cfg
+ * to reserve resources. A request to hwrm_func_cfg may not be fully granted;
+ * that is, a request for resources may be larger than what can be supported by
+ * the device and the HWRM will allocate the best set of resources available,
+ * but that may be less than requested. If all the amounts requested could not
+ * be fulfilled, the HWRM shall allocate what it could and return a status code
+ * of success. A function driver should call hwrm_func_qcfg immediately after
+ * hwrm_func_cfg to determine what resources were assigned to the configured
+ * function. A call by a PF driver to hwrm_func_cfg to allocate resources for
+ * itself shall only allocate resources for the PF driver to use, not for its
+ * children VFs. Likewise, a call to hwrm_func_qcfg shall return the resources
+ * available for the PF driver to use, not what is available to its children
+ * VFs.
*/
-/* Input (24 bytes) */
-struct hwrm_func_qcfg_input {
+/* Input (88 bytes) */
+struct hwrm_func_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -2491,235 +2357,342 @@ struct hwrm_func_qcfg_input {
*/
uint16_t fid;
/*
- * Function ID of the function that is being queried. 0xFF...
- * (All Fs) if the query is for the requesting function.
+ * Function ID of the function that is being configured. If set
+ * to 0xFF... (All Fs), then the the configuration is for the
+ * requesting function.
*/
- uint16_t unused_0[3];
-} __attribute__((packed));
-
-/* Output (72 bytes) */
-struct hwrm_func_qcfg_output {
- uint16_t error_code;
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t flags;
/*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
+ * When this bit is '1', the function is disabled with source
+ * MAC address check. This is an anti-spoofing check. If this
+ * flag is set, then the function shall be configured to
+ * disallow transmission of frames with the source MAC address
+ * that is configured for this function.
*/
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
+ UINT32_C(0x1)
/*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
+ * When this bit is '1', the function is enabled with source MAC
+ * address check. This is an anti-spoofing check. If this flag
+ * is set, then the function shall be configured to allow
+ * transmission of frames with the source MAC address that is
+ * configured for this function.
*/
- uint16_t fid;
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \
+ UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK UINT32_C(0x1fc)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2
/*
- * FID value. This value is used to identify operations on the
- * PCI bus as belonging to a particular PCI function.
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then standard TX ring mode is requested to be
+ * enabled on the function being configured.
*/
- uint16_t port_id;
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \
+ UINT32_C(0x200)
/*
- * Port ID of port that this function is associated with.
- * 0xFF... (All Fs) if this function is not associated with any
- * port.
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then the standard TX ring mode is requested to be
+ * disabled on the function being configured. In this extended
+ * TX ring resource mode, the minimum and maximum bandwidth
+ * settings are not supported to allow the allocation of TX
+ * rings to span multiple scheduler nodes.
*/
- uint16_t vlan;
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \
+ UINT32_C(0x400)
+ uint32_t enables;
+ /* This bit must be '1' for the mtu field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU UINT32_C(0x2)
/*
- * This value is the current VLAN setting for this function. The
- * value of 0 for this field indicates no priority tagging or
- * VLAN is used. This field's format is same as 802.1Q Tag's Tag
- * Control Information (TCI) format that includes both Priority
- * Code Point (PCP) and VLAN Identifier (VID).
+ * This bit must be '1' for the num_rsscos_ctxs field to be
+ * configured.
*/
- uint16_t flags;
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS UINT32_C(0x4)
/*
- * If 1, then magic packet based Out-Of-Box WoL is enabled on
- * the port associated with this function.
+ * This bit must be '1' for the num_cmpl_rings field to be
+ * configured.
*/
- #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \
- UINT32_C(0x1)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS UINT32_C(0x8)
+ /* This bit must be '1' for the num_tx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS UINT32_C(0x10)
+ /* This bit must be '1' for the num_rx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS UINT32_C(0x20)
+ /* This bit must be '1' for the num_l2_ctxs field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS UINT32_C(0x40)
+ /* This bit must be '1' for the num_vnics field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS UINT32_C(0x80)
/*
- * If 1, then bitmap pattern based Out-Of-Box WoL packet is
- * enabled on the port associated with this function.
+ * This bit must be '1' for the num_stat_ctxs field to be
+ * configured.
*/
- #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED UINT32_C(0x2)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS UINT32_C(0x100)
/*
- * If set to 1, then FW based DCBX agent is enabled and running
- * on the port associated with this function. If set to 0, then
- * DCBX agent is not running in the firmware.
+ * This bit must be '1' for the dflt_mac_addr field to be
+ * configured.
*/
- #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \
- UINT32_C(0x4)
- uint8_t mac_address[6];
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x200)
+ /* This bit must be '1' for the dflt_vlan field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN UINT32_C(0x400)
+ /* This bit must be '1' for the dflt_ip_addr field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR UINT32_C(0x800)
+ /* This bit must be '1' for the min_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW UINT32_C(0x1000)
+ /* This bit must be '1' for the max_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW UINT32_C(0x2000)
/*
- * This value is current MAC address configured for this
- * function. A value of 00-00-00-00-00-00 indicates no MAC
- * address is currently configured.
+ * This bit must be '1' for the async_event_cr field to be
+ * configured.
*/
- uint16_t pci_id;
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4000)
/*
- * This value is current PCI ID of this function. If ARI is
- * enabled, then it is Bus Number (8b):Function Number(8b).
- * Otherwise, it is Bus Number (8b):Device Number (4b):Function
- * Number(4b).
+ * This bit must be '1' for the vlan_antispoof_mode field to be
+ * configured.
*/
- uint16_t alloc_rsscos_ctx;
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE UINT32_C(0x8000)
/*
- * The number of RSS/COS contexts currently allocated to the
- * function.
+ * This bit must be '1' for the allowed_vlan_pris field to be
+ * configured.
*/
- uint16_t alloc_cmpl_rings;
- /*
- * The number of completion rings currently allocated to the
- * function. This does not include the rings allocated to any
- * children functions if any.
- */
- uint16_t alloc_tx_rings;
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000)
+ /* This bit must be '1' for the evb_mode field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE UINT32_C(0x20000)
/*
- * The number of transmit rings currently allocated to the
- * function. This does not include the rings allocated to any
- * children functions if any.
+ * This bit must be '1' for the num_mcast_filters field to be
+ * configured.
*/
- uint16_t alloc_rx_rings;
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000)
/*
- * The number of receive rings currently allocated to the
- * function. This does not include the rings allocated to any
- * children functions if any.
+ * This bit must be '1' for the num_hw_ring_grps field to be
+ * configured.
*/
- uint16_t alloc_l2_ctx;
- /* The allocated number of L2 contexts to the function. */
- uint16_t alloc_vnics;
- /* The allocated number of vnics to the function. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000)
uint16_t mtu;
/*
- * The maximum transmission unit of the function. For rings
- * allocated on this function, this default value is used if
- * ring MTU is not specified.
+ * The maximum transmission unit of the function. The HWRM
+ * should make sure that the mtu of the function does not exceed
+ * the mtu of the physical port that this function is associated
+ * with. In addition to configuring mtu per function, it is
+ * possible to configure mtu per transmit ring. By default, the
+ * mtu of each transmit ring associated with a function is equal
+ * to the mtu of the function. The HWRM should make sure that
+ * the mtu of each transmit ring that is assigned to a function
+ * has a valid mtu.
*/
uint16_t mru;
/*
- * The maximum receive unit of the function. For vnics allocated
- * on this function, this default value is used if vnic MRU is
- * not specified.
+ * The maximum receive unit of the function. The HWRM should
+ * make sure that the mru of the function does not exceed the
+ * mru of the physical port that this function is associated
+ * with. In addition to configuring mru per function, it is
+ * possible to configure mru per vnic. By default, the mru of
+ * each vnic associated with a function is equal to the mru of
+ * the function. The HWRM should make sure that the mru of each
+ * vnic that is assigned to a function has a valid mru.
*/
- uint16_t stat_ctx_id;
- /* The statistics context assigned to a function. */
- uint8_t port_partition_type;
+ uint16_t num_rsscos_ctxs;
+ /* The number of RSS/COS contexts requested for the function. */
+ uint16_t num_cmpl_rings;
/*
- * The HWRM shall return Unknown value for this field when this
- * command is used to query VF's configuration.
+ * The number of completion rings requested for the function.
+ * This does not include the rings allocated to any children
+ * functions if any.
+ */
+ uint16_t num_tx_rings;
+ /*
+ * The number of transmit rings requested for the function. This
+ * does not include the rings allocated to any children
+ * functions if any.
+ */
+ uint16_t num_rx_rings;
+ /*
+ * The number of receive rings requested for the function. This
+ * does not include the rings allocated to any children
+ * functions if any.
+ */
+ uint16_t num_l2_ctxs;
+ /* The requested number of L2 contexts for the function. */
+ uint16_t num_vnics;
+ /* The requested number of vnics for the function. */
+ uint16_t num_stat_ctxs;
+ /* The requested number of statistic contexts for the function. */
+ uint16_t num_hw_ring_grps;
+ /*
+ * The number of HW ring groups that should be reserved for this
+ * function.
+ */
+ uint8_t dflt_mac_addr[6];
+ /* The default MAC address for the function being configured. */
+ uint16_t dflt_vlan;
+ /*
+ * The default VLAN for the function being configured. This
+ * field's format is same as 802.1Q Tag's Tag Control
+ * Information (TCI) format that includes both Priority Code
+ * Point (PCP) and VLAN Identifier (VID).
+ */
+ uint32_t dflt_ip_addr[4];
+ /*
+ * The default IP address for the function being configured.
+ * This address is only used in enabling source property check.
*/
- /* Single physical function */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0)
- /* Multiple physical functions */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1)
- /* Network Partitioning 1.0 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 \
- UINT32_C(0x2)
- /* Network Partitioning 1.5 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 \
- UINT32_C(0x3)
- /* Network Partitioning 2.0 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 \
- UINT32_C(0x4)
- /* Unknown */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t unused_0;
- uint16_t dflt_vnic_id;
- /* The default VNIC ID assigned to a function that is being queried. */
- uint8_t unused_1;
- uint8_t unused_2;
uint32_t min_bw;
/*
* Minimum BW allocated for this function. The HWRM will
* translate this value into byte counter and time interval used
- * for the scheduler inside the device. A value of 0 indicates
- * the minimum bandwidth is not configured.
+ * for the scheduler inside the device.
*/
- /* Bandwidth value */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0
- /* Reserved */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_RSVD UINT32_C(0x10000000)
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \
+ FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mbps */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MBPS \
- (UINT32_C(0x0) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA (UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
- FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
+ FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
uint32_t max_bw;
/*
* Maximum BW allocated for this function. The HWRM will
* translate this value into byte counter and time interval used
- * for the scheduler inside the device. A value of 0 indicates
- * that the maximum bandwidth is not configured.
+ * for the scheduler inside the device.
*/
- /* Bandwidth value */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0
- /* Reserved */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_RSVD UINT32_C(0x10000000)
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \
+ FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mbps */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MBPS \
- (UINT32_C(0x0) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA (UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \
- FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ uint16_t async_event_cr;
+ /*
+ * ID of the target completion ring for receiving asynchronous
+ * event completions. If this field is not valid, then the HWRM
+ * shall use the default completion ring of the function that is
+ * being configured as the target completion ring for providing
+ * any asynchronous event completions for that function. If this
+ * field is valid, then the HWRM shall use the completion ring
+ * identified by this ID as the target completion ring for
+ * providing any asynchronous event completions for the function
+ * that is being configured.
+ */
+ uint8_t vlan_antispoof_mode;
+ /* VLAN Anti-spoofing mode. */
+ /* No VLAN anti-spoofing checks are enabled */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK UINT32_C(0x0)
+ /* Validate VLAN against the configured VLAN(s) */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN UINT32_C(0x1)
+ /* Insert VLAN if it does not exist, otherwise discard */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \
+ UINT32_C(0x2)
+ /*
+ * Insert VLAN if it does not exist, override
+ * VLAN if it exists
+ */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \
+ UINT32_C(0x3)
+ uint8_t allowed_vlan_pris;
+ /*
+ * This bit field defines VLAN PRIs that are allowed on this
+ * function. If nth bit is set, then VLAN PRI n is allowed on
+ * this function.
+ */
uint8_t evb_mode;
/*
- * This value indicates the Edge virtual bridge mode for the
- * domain that this function belongs to.
+ * The HWRM shall allow a PF driver to change EVB mode for the
+ * partition it belongs to. The HWRM shall not allow a VF driver
+ * to change the EVB mode. The HWRM shall take into account the
+ * switching of EVB mode from one to another and reconfigure
+ * hardware resources as appropriately. The switching from VEB
+ * to VEPA mode requires the disabling of the loopback traffic.
+ * Additionally, source knock outs are handled differently in
+ * VEB and VEPA modes.
*/
- /* No Edge Virtual Bridging (EVB) */
- #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
- /* Virtual Ethernet Bridge (VEB) */
- #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1)
- /* Virtual Ethernet Port Aggregator (VEPA) */
- #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2)
- uint8_t unused_3;
- uint16_t alloc_vfs;
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ uint8_t unused_2;
+ uint16_t num_mcast_filters;
/*
- * The number of VFs that are allocated to the function. This is
- * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
- * this command is called on a PF with SR-IOV disabled or on a
- * VF.
+ * The number of multicast filters that should be reserved for
+ * this function on the RX side.
*/
- uint32_t alloc_mcast_filters;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_cfg_output {
+ uint16_t error_code;
/*
- * The number of allocated multicast filters for this function
- * on the RX side.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint32_t alloc_hw_ring_grps;
- /* The number of allocated HW ring groups for this function. */
- uint16_t alloc_sp_tx_rings;
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * The number of strict priority transmit rings out of currently
- * allocated TX rings to the function (alloc_tx_rings).
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- uint8_t unused_4;
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
@@ -2731,43 +2704,16 @@ struct hwrm_func_qcfg_output {
*/
} __attribute__((packed));
-/* hwrm_func_cfg */
+/* hwrm_func_qstats */
/*
- * Description: This command allows configuration of a PF by the corresponding
- * PF driver. This command also allows configuration of a child VF by its parent
- * PF driver. The input FID value is used to indicate what function is being
- * configured. This allows a PF driver to configure the PF owned by itself or a
- * virtual function that is a child of the PF. This command allows to reserve
- * resources for a VF by its parent PF. To reverse the process, the command
- * should be called with all enables flags cleared for resources. This will free
- * allocated resources for the VF and return them to the resource pool. If this
- * command is requested by a VF driver to configure or reserve resources, then
- * the HWRM shall fail this command. If default MAC address and/or VLAN are
- * provided in this command, then the HWRM shall set up appropriate MAC/VLAN
- * filters for the function that is being configured. If source properties
- * checks are enabled and default MAC address and/or IP address are provided in
- * this command, then the HWRM shall set appropriate source property checks
- * based on provided MAC and/or IP addresses. The parent PF driver should not
- * set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by
- * the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the
- * HWRM should ignore it. A function's MTU/MRU should be set prior to allocating
- * RX VNICs or TX rings. A PF driver calls hwrm_func_cfg to allocate resources
- * for itself or its children VFs. All function drivers shall call hwrm_func_cfg
- * to reserve resources. A request to hwrm_func_cfg may not be fully granted;
- * that is, a request for resources may be larger than what can be supported by
- * the device and the HWRM will allocate the best set of resources available,
- * but that may be less than requested. If all the amounts requested could not
- * be fulfilled, the HWRM shall allocate what it could and return a status code
- * of success. A function driver should call hwrm_func_qcfg immediately after
- * hwrm_func_cfg to determine what resources were assigned to the configured
- * function. A call by a PF driver to hwrm_func_cfg to allocate resources for
- * itself shall only allocate resources for the PF driver to use, not for its
- * children VFs. Likewise, a call to hwrm_func_qcfg shall return the resources
- * available for the PF driver to use, not what is available to its children
- * VFs.
+ * Description: This command returns statistics of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The HWRM shall return any unsupported counter with a value
+ * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
*/
-/* Input (88 bytes) */
-struct hwrm_func_cfg_input {
+/* Input (24 bytes) */
+struct hwrm_func_qstats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -2796,337 +2742,155 @@ struct hwrm_func_cfg_input {
*/
uint16_t fid;
/*
- * Function ID of the function that is being configured. If set
- * to 0xFF... (All Fs), then the the configuration is for the
- * requesting function.
+ * Function ID of the function that is being queried. 0xFF...
+ * (All Fs) if the query is for the requesting function.
*/
- uint8_t unused_0;
- uint8_t unused_1;
- uint32_t flags;
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (176 bytes) */
+struct hwrm_func_qstats_output {
+ uint16_t error_code;
/*
- * When this bit is '1', the function is disabled with source
- * MAC address check. This is an anti-spoofing check. If this
- * flag is set, then the function shall be configured to
- * disallow transmission of frames with the source MAC address
- * that is configured for this function.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
- UINT32_C(0x1)
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * When this bit is '1', the function is enabled with source MAC
- * address check. This is an anti-spoofing check. If this flag
- * is set, then the function shall be configured to allow
- * transmission of frames with the source MAC address that is
- * configured for this function.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \
- UINT32_C(0x2)
- /* reserved */
- #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK UINT32_C(0x1fc)
- #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets on the function. */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets on the function. */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets on the function. */
+ uint64_t tx_err_pkts;
/*
- * Standard TX Ring mode is used for the allocation of TX ring
- * and underlying scheduling resources that allow bandwidth
- * reservation and limit settings on the queried function. If
- * set to 1, then standard TX ring mode is requested to be
- * enabled on the function being configured.
+ * Number of transmitted packets that were discarded due to
+ * internal NIC resource problems. For transmit, this can only
+ * happen if TMP is configured to allow dropping in HOL blocking
+ * conditions, which is not a normal configuration.
*/
- #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \
- UINT32_C(0x200)
+ uint64_t tx_drop_pkts;
/*
- * Standard TX Ring mode is used for the allocation of TX ring
- * and underlying scheduling resources that allow bandwidth
- * reservation and limit settings on the queried function. If
- * set to 1, then the standard TX ring mode is requested to be
- * disabled on the function being configured. In this extended
- * TX ring resource mode, the minimum and maximum bandwidth
- * settings are not supported to allow the allocation of TX
- * rings to span multiple scheduler nodes.
+ * Number of dropped packets on transmit path on the function.
+ * These are packets that have been marked for drop by the TE
+ * CFA block or are packets that exceeded the transmit MTU limit
+ * for the function.
*/
- #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \
- UINT32_C(0x400)
- uint32_t enables;
- /* This bit must be '1' for the mtu field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
- /* This bit must be '1' for the mru field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU UINT32_C(0x2)
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic on the function. */
+ uint64_t tx_mcast_bytes;
/*
- * This bit must be '1' for the num_rsscos_ctxs field to be
- * configured.
+ * Number of transmitted bytes for multicast traffic on the
+ * function.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS UINT32_C(0x4)
+ uint64_t tx_bcast_bytes;
/*
- * This bit must be '1' for the num_cmpl_rings field to be
- * configured.
+ * Number of transmitted bytes for broadcast traffic on the
+ * function.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS UINT32_C(0x8)
- /* This bit must be '1' for the num_tx_rings field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS UINT32_C(0x10)
- /* This bit must be '1' for the num_rx_rings field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS UINT32_C(0x20)
- /* This bit must be '1' for the num_l2_ctxs field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS UINT32_C(0x40)
- /* This bit must be '1' for the num_vnics field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS UINT32_C(0x80)
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets on the function. */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets on the function. */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets on the function. */
+ uint64_t rx_err_pkts;
/*
- * This bit must be '1' for the num_stat_ctxs field to be
- * configured.
+ * Number of received packets that were discarded on the
+ * function due to resource limitations. This can happen for 3
+ * reasons. # The BD used for the packet has a bad format. #
+ * There were no BDs available in the ring for the packet. #
+ * There were no BDs available on-chip for the packet.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS UINT32_C(0x100)
+ uint64_t rx_drop_pkts;
/*
- * This bit must be '1' for the dflt_mac_addr field to be
- * configured.
+ * Number of dropped packets on received path on the function.
+ * These are packets that have been marked for drop by the RE
+ * CFA.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x200)
- /* This bit must be '1' for the dflt_vlan field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN UINT32_C(0x400)
- /* This bit must be '1' for the dflt_ip_addr field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR UINT32_C(0x800)
- /* This bit must be '1' for the min_bw field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW UINT32_C(0x1000)
- /* This bit must be '1' for the max_bw field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW UINT32_C(0x2000)
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic on the function. */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic on the function. */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic on the function. */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets on the function. */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes on the function. */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events on the function. */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations on the function. */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
/*
- * This bit must be '1' for the async_event_cr field to be
- * configured.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4000)
+} __attribute__((packed));
+
+/* hwrm_func_clr_stats */
+/*
+ * Description: This command clears statistics of a function. The input FID
+ * value is used to indicate what function's statistics is being cleared. This
+ * allows a physical function driver to clear statistics of virtual functions
+ * that are children of the physical function.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_clr_stats_input {
+ uint16_t req_type;
/*
- * This bit must be '1' for the vlan_antispoof_mode field to be
- * configured.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE UINT32_C(0x8000)
+ uint16_t cmpl_ring;
/*
- * This bit must be '1' for the allowed_vlan_pris field to be
- * configured.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000)
- /* This bit must be '1' for the evb_mode field to be configured. */
- #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE UINT32_C(0x20000)
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * This bit must be '1' for the num_mcast_filters field to be
- * configured.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000)
+ uint64_t resp_addr;
/*
- * This bit must be '1' for the num_hw_ring_grps field to be
- * configured.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000)
- uint16_t mtu;
+ uint16_t fid;
/*
- * The maximum transmission unit of the function. The HWRM
- * should make sure that the mtu of the function does not exceed
- * the mtu of the physical port that this function is associated
- * with. In addition to configuring mtu per function, it is
- * possible to configure mtu per transmit ring. By default, the
- * mtu of each transmit ring associated with a function is equal
- * to the mtu of the function. The HWRM should make sure that
- * the mtu of each transmit ring that is assigned to a function
- * has a valid mtu.
- */
- uint16_t mru;
- /*
- * The maximum receive unit of the function. The HWRM should
- * make sure that the mru of the function does not exceed the
- * mru of the physical port that this function is associated
- * with. In addition to configuring mru per function, it is
- * possible to configure mru per vnic. By default, the mru of
- * each vnic associated with a function is equal to the mru of
- * the function. The HWRM should make sure that the mru of each
- * vnic that is assigned to a function has a valid mru.
- */
- uint16_t num_rsscos_ctxs;
- /* The number of RSS/COS contexts requested for the function. */
- uint16_t num_cmpl_rings;
- /*
- * The number of completion rings requested for the function.
- * This does not include the rings allocated to any children
- * functions if any.
- */
- uint16_t num_tx_rings;
- /*
- * The number of transmit rings requested for the function. This
- * does not include the rings allocated to any children
- * functions if any.
- */
- uint16_t num_rx_rings;
- /*
- * The number of receive rings requested for the function. This
- * does not include the rings allocated to any children
- * functions if any.
- */
- uint16_t num_l2_ctxs;
- /* The requested number of L2 contexts for the function. */
- uint16_t num_vnics;
- /* The requested number of vnics for the function. */
- uint16_t num_stat_ctxs;
- /* The requested number of statistic contexts for the function. */
- uint16_t num_hw_ring_grps;
- /*
- * The number of HW ring groups that should be reserved for this
- * function.
- */
- uint8_t dflt_mac_addr[6];
- /* The default MAC address for the function being configured. */
- uint16_t dflt_vlan;
- /*
- * The default VLAN for the function being configured. This
- * field's format is same as 802.1Q Tag's Tag Control
- * Information (TCI) format that includes both Priority Code
- * Point (PCP) and VLAN Identifier (VID).
- */
- uint32_t dflt_ip_addr[4];
- /*
- * The default IP address for the function being configured.
- * This address is only used in enabling source property check.
- */
- uint32_t min_bw;
- /*
- * Minimum BW allocated for this function. The HWRM will
- * translate this value into byte counter and time interval used
- * for the scheduler inside the device.
- */
- /* The bandwidth value. */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \
- FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
- FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
- uint32_t max_bw;
- /*
- * Maximum BW allocated for this function. The HWRM will
- * translate this value into byte counter and time interval used
- * for the scheduler inside the device.
- */
- /* The bandwidth value. */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0
- /* The granularity of the value (bits or bytes). */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
- /* Value is in bits. */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
- /* Value is in bytes. */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \
- FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES
- /* bw_value_unit is 3 b */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mb or MB (base 10). */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
- (UINT32_C(0x0) << 29)
- /* Value is in Kb or KB (base 10). */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
- (UINT32_C(0x2) << 29)
- /* Value is in bits or bytes. */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
- (UINT32_C(0x4) << 29)
- /* Value is in Gb or GB (base 10). */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
- (UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
- FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
- uint16_t async_event_cr;
- /*
- * ID of the target completion ring for receiving asynchronous
- * event completions. If this field is not valid, then the HWRM
- * shall use the default completion ring of the function that is
- * being configured as the target completion ring for providing
- * any asynchronous event completions for that function. If this
- * field is valid, then the HWRM shall use the completion ring
- * identified by this ID as the target completion ring for
- * providing any asynchronous event completions for the function
- * that is being configured.
- */
- uint8_t vlan_antispoof_mode;
- /* VLAN Anti-spoofing mode. */
- /* No VLAN anti-spoofing checks are enabled */
- #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK UINT32_C(0x0)
- /* Validate VLAN against the configured VLAN(s) */
- #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \
- UINT32_C(0x1)
- /* Insert VLAN if it does not exist, otherwise discard */
- #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \
- UINT32_C(0x2)
- /*
- * Insert VLAN if it does not exist, override
- * VLAN if it exists
- */
- #define \
- HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \
- UINT32_C(0x3)
- uint8_t allowed_vlan_pris;
- /*
- * This bit field defines VLAN PRIs that are allowed on this
- * function. If nth bit is set, then VLAN PRI n is allowed on
- * this function.
- */
- uint8_t evb_mode;
- /*
- * The HWRM shall allow a PF driver to change EVB mode for the
- * partition it belongs to. The HWRM shall not allow a VF driver
- * to change the EVB mode. The HWRM shall take into account the
- * switching of EVB mode from one to another and reconfigure
- * hardware resources as appropriately. The switching from VEB
- * to VEPA mode requires the disabling of the loopback traffic.
- * Additionally, source knock outs are handled differently in
- * VEB and VEPA modes.
- */
- /* No Edge Virtual Bridging (EVB) */
- #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
- /* Virtual Ethernet Bridge (VEB) */
- #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1)
- /* Virtual Ethernet Port Aggregator (VEPA) */
- #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2)
- uint8_t unused_2;
- uint16_t num_mcast_filters;
- /*
- * The number of multicast filters that should be reserved for
- * this function on the RX side.
+ * Function ID of the function. 0xFF... (All Fs) if the query is
+ * for the requesting function.
*/
+ uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
-struct hwrm_func_cfg_output {
+struct hwrm_func_clr_stats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -3157,16 +2921,10 @@ struct hwrm_func_cfg_output {
*/
} __attribute__((packed));
-/* hwrm_func_qstats */
-/*
- * Description: This command returns statistics of a function. The input FID
- * value is used to indicate what function is being queried. This allows a
- * physical function driver to query virtual functions that are children of the
- * physical function. The HWRM shall return any unsupported counter with a value
- * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
- */
-/* Input (24 bytes) */
-struct hwrm_func_qstats_input {
+/* hwrm_func_vf_vnic_ids_query */
+/* Description: This command is used to query vf vnic ids. */
+/* Input (32 bytes) */
+struct hwrm_func_vf_vnic_ids_query_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -3193,16 +2951,21 @@ struct hwrm_func_qstats_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint16_t fid;
+ uint16_t vf_id;
/*
- * Function ID of the function that is being queried. 0xFF...
- * (All Fs) if the query is for the requesting function.
+ * This value is used to identify a Virtual Function (VF). The
+ * scope of VF ID is local within a PF.
*/
- uint16_t unused_0[3];
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t max_vnic_id_cnt;
+ /* Max number of vnic ids in vnic id table */
+ uint64_t vnic_id_tbl_addr;
+ /* This is the address for VF VNIC ID table */
} __attribute__((packed));
-/* Output (176 bytes) */
-struct hwrm_func_qstats_output {
+/* Output (16 bytes) */
+struct hwrm_func_vf_vnic_ids_query_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -3218,177 +2981,40 @@ struct hwrm_func_qstats_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint64_t tx_ucast_pkts;
- /* Number of transmitted unicast packets on the function. */
- uint64_t tx_mcast_pkts;
- /* Number of transmitted multicast packets on the function. */
- uint64_t tx_bcast_pkts;
- /* Number of transmitted broadcast packets on the function. */
- uint64_t tx_err_pkts;
+ uint32_t vnic_id_cnt;
/*
- * Number of transmitted packets that were discarded due to
- * internal NIC resource problems. For transmit, this can only
- * happen if TMP is configured to allow dropping in HOL blocking
- * conditions, which is not a normal configuration.
+ * Actual number of vnic ids Each VNIC ID is written as a 32-bit
+ * number.
*/
- uint64_t tx_drop_pkts;
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
/*
- * Number of dropped packets on transmit path on the function.
- * These are packets that have been marked for drop by the TE
- * CFA block or are packets that exceeded the transmit MTU limit
- * for the function.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint64_t tx_ucast_bytes;
- /* Number of transmitted bytes for unicast traffic on the function. */
- uint64_t tx_mcast_bytes;
+} __attribute__((packed));
+
+/* hwrm_func_drv_rgtr */
+/*
+ * Description: This command is used by the function driver to register its
+ * information with the HWRM. A function driver shall implement this command. A
+ * function driver shall use this command during the driver initialization right
+ * after the HWRM version discovery and default ring resources allocation.
+ */
+/* Input (80 bytes) */
+struct hwrm_func_drv_rgtr_input {
+ uint16_t req_type;
/*
- * Number of transmitted bytes for multicast traffic on the
- * function.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- uint64_t tx_bcast_bytes;
- /*
- * Number of transmitted bytes for broadcast traffic on the
- * function.
- */
- uint64_t rx_ucast_pkts;
- /* Number of received unicast packets on the function. */
- uint64_t rx_mcast_pkts;
- /* Number of received multicast packets on the function. */
- uint64_t rx_bcast_pkts;
- /* Number of received broadcast packets on the function. */
- uint64_t rx_err_pkts;
- /*
- * Number of received packets that were discarded on the
- * function due to resource limitations. This can happen for 3
- * reasons. # The BD used for the packet has a bad format. #
- * There were no BDs available in the ring for the packet. #
- * There were no BDs available on-chip for the packet.
- */
- uint64_t rx_drop_pkts;
- /*
- * Number of dropped packets on received path on the function.
- * These are packets that have been marked for drop by the RE
- * CFA.
- */
- uint64_t rx_ucast_bytes;
- /* Number of received bytes for unicast traffic on the function. */
- uint64_t rx_mcast_bytes;
- /* Number of received bytes for multicast traffic on the function. */
- uint64_t rx_bcast_bytes;
- /* Number of received bytes for broadcast traffic on the function. */
- uint64_t rx_agg_pkts;
- /* Number of aggregated unicast packets on the function. */
- uint64_t rx_agg_bytes;
- /* Number of aggregated unicast bytes on the function. */
- uint64_t rx_agg_events;
- /* Number of aggregation events on the function. */
- uint64_t rx_agg_aborts;
- /* Number of aborted aggregations on the function. */
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
- */
-} __attribute__((packed));
-
-/* hwrm_func_clr_stats */
-/*
- * Description: This command clears statistics of a function. The input FID
- * value is used to indicate what function's statistics is being cleared. This
- * allows a physical function driver to clear statistics of virtual functions
- * that are children of the physical function.
- */
-/* Input (24 bytes) */
-struct hwrm_func_clr_stats_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
- */
- uint16_t fid;
- /*
- * Function ID of the function. 0xFF... (All Fs) if the query is
- * for the requesting function.
- */
- uint16_t unused_0[3];
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_func_clr_stats_output {
- uint16_t error_code;
- /*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
- */
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
- /*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
- */
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
- */
-} __attribute__((packed));
-
-/* hwrm_func_drv_rgtr */
-/*
- * Description: This command is used by the function driver to register its
- * information with the HWRM. A function driver shall implement this command. A
- * function driver shall use this command during the driver initialization right
- * after the HWRM version discovery and default ring resources allocation.
- */
-/* Input (80 bytes) */
-struct hwrm_func_drv_rgtr_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
+ uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
@@ -3439,7 +3065,10 @@ struct hwrm_func_drv_rgtr_input {
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD UINT32_C(0x10)
uint16_t os_type;
- /* This value indicates the type of OS. */
+ /*
+ * This value indicates the type of OS. The values are based on
+ * CIM_OperatingSystem.mof file as published by the DMTF.
+ */
/* Unknown */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
/* Other OS not listed below. */
@@ -3487,17 +3116,17 @@ struct hwrm_func_drv_rgtr_input {
uint32_t async_event_fwd[8];
/*
* This is a 256-bit bit mask provided by the function driver
- * (PF or VF driver) to indicate the list of asynchronous event
+ * (PF or VF driver) to indicate the list of asynchronous event
* completions to be forwarded. Nth bit refers to the Nth
* event_id. Setting Nth bit to 1 by the function driver shall
* result in the HWRM forwarding asynchronous event completion
- * with event_id equal to N. If all bits are set to 0 (value of
+ * with event_id equal to N. If all bits are set to 0 (value of
* 0), then the HWRM shall not forward any asynchronous event
* completion to this function driver.
*/
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_func_drv_rgtr_output {
uint16_t error_code;
/*
@@ -3529,6 +3158,82 @@ struct hwrm_func_drv_rgtr_output {
*/
} __attribute__((packed));
+/* hwrm_func_drv_unrgtr */
+/*
+ * Description: This command is used by the function driver to un register with
+ * the HWRM. A function driver shall implement this command. A function driver
+ * shall use this command during the driver unloading.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_drv_unrgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is notifying the
+ * HWRM to prepare for the shutdown.
+ */
+ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
+ UINT32_C(0x1)
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_drv_unrgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_buf_rgtr */
/*
* Description: This command is used by the PF driver to register buffers used
@@ -3537,86 +3242,88 @@ struct hwrm_func_drv_rgtr_output {
* per child VF. If VF ID is not valid, then this command is used to register
* buffers for all children VFs of the PF.
*/
-/* Input (128 bytes) */
+/* Input (128 bytes) */
struct hwrm_func_buf_rgtr_input {
uint16_t req_type;
/*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the vf_id field to be configured. */
- #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID (UINT32_C(0x1))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
/* This bit must be '1' for the err_buf_addr field to be configured. */
- #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR (UINT32_C(0x2))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2)
uint16_t vf_id;
/*
- * This value is used to identify a Virtual Function (VF). The scope of
- * VF ID is local within a PF.
+ * This value is used to identify a Virtual Function (VF). The
+ * scope of VF ID is local within a PF.
*/
uint16_t req_buf_num_pages;
/*
- * This field represents the number of pages used for request buffer(s).
+ * This field represents the number of pages used for request
+ * buffer(s).
*/
uint16_t req_buf_page_size;
/* This field represents the page size used for request buffer(s). */
/* 16 bytes */
- #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_16B (UINT32_C(0x4))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_16B UINT32_C(0x4)
/* 4 Kbytes */
- #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4K (UINT32_C(0xc))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4K UINT32_C(0xc)
/* 8 Kbytes */
- #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_8K (UINT32_C(0xd))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_8K UINT32_C(0xd)
/* 64 Kbytes */
- #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_64K (UINT32_C(0x10))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_64K UINT32_C(0x10)
/* 2 Mbytes */
- #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_2M (UINT32_C(0x15))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_2M UINT32_C(0x15)
/* 4 Mbytes */
- #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4M (UINT32_C(0x16))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4M UINT32_C(0x16)
/* 1 Gbytes */
- #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G (UINT32_C(0x1e))
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_1G UINT32_C(0x1e)
uint16_t req_buf_len;
/* The length of the request buffer per VF in bytes. */
uint16_t resp_buf_len;
/* The length of the response buffer in bytes. */
uint8_t unused_0;
uint8_t unused_1;
- /* This field represents the page addresses. */
uint64_t req_buf_page_addr[10];
+ /* This field represents the page address of req buffer. */
uint64_t error_buf_addr;
/*
- * This field is used to receive the error reporting from the chipset.
- * Only applicable for PFs.
+ * This field is used to receive the error reporting from the
+ * chipset. Only applicable for PFs.
*/
uint64_t resp_buf_addr;
/* This field is used to receive the response forwarded by the HWRM. */
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_func_buf_rgtr_output {
uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
@@ -3624,9 +3331,9 @@ struct hwrm_func_buf_rgtr_output {
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
@@ -3634,22 +3341,26 @@ struct hwrm_func_buf_rgtr_output {
uint8_t unused_3;
uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
} __attribute__((packed));
-/* hwrm_func_drv_unrgtr */
+/* hwrm_func_buf_unrgtr */
/*
- * Description: This command is used by the function driver to un register with
- * the HWRM. A function driver shall implement this command. A function driver
- * shall use this command during the driver unloading.
+ * Description: This command is used by the PF driver to unregister buffers used
+ * in the PF-VF communication with the HWRM. The PF driver uses this command to
+ * unregister buffers for PF-VF communication. A parent PF may issue this
+ * command to unregister buffers for communication between the PF and a specific
+ * VF. If the VF ID is not valid, then this command is used to unregister
+ * buffers used for communications with all children VFs of the PF.
*/
-/* Input (24 bytes) */
-struct hwrm_func_drv_unrgtr_input {
+/* Input (24 bytes) */
+struct hwrm_func_buf_unrgtr_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -3676,17 +3387,19 @@ struct hwrm_func_drv_unrgtr_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id field to be configured. */
+ #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
+ uint16_t vf_id;
/*
- * When this bit is '1', the function driver is notifying the
- * HWRM to prepare for the shutdown.
+ * This value is used to identify a Virtual Function (VF). The
+ * scope of VF ID is local within a PF.
*/
- #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN UINT32_C(0x1)
- uint32_t unused_0;
+ uint16_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_func_drv_unrgtr_output {
+/* Output (16 bytes) */
+struct hwrm_func_buf_unrgtr_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -3717,82 +3430,6 @@ struct hwrm_func_drv_unrgtr_output {
*/
} __attribute__((packed));
-/* hwrm_func_vf_vnic_ids_query */
-/* Description: This command is used to query vf vnic ids. */
-/* Input (32 bytes) */
-struct hwrm_func_vf_vnic_ids_query_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
- */
- uint16_t vf_id;
- /*
- * This value is used to identify a Virtual Function (VF). The scope of
- * VF ID is local within a PF.
- */
- uint8_t unused_0;
- uint8_t unused_1;
- uint32_t max_vnic_id_cnt;
- /* Max number of vnic ids in vnic id table */
- uint64_t vnic_id_tbl_addr;
- /* This is the address for VF VNIC ID table */
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_func_vf_vnic_ids_query_output {
- uint16_t error_code;
- /*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
- */
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
- /*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
- */
- uint32_t vnic_id_cnt;
- /*
- * Actual number of vnic ids Each VNIC ID is written as a 32-bit number.
- */
- uint8_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t valid;
- /*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
- */
-} __attribute__((packed));
-
/* hwrm_port_phy_cfg */
/*
* Description: This command configures the PHY device for the port. It allows
@@ -3802,7 +3439,7 @@ struct hwrm_func_vf_vnic_ids_query_output {
* configure PHY using this command. In a network partition mode, a PF driver
* shall not be allowed to configure PHY using this command.
*/
-/* Input (56 bytes) */
+/* Input (56 bytes) */
struct hwrm_port_phy_cfg_input {
uint16_t req_type;
/*
@@ -3842,19 +3479,8 @@ struct hwrm_port_phy_cfg_input {
* PHY configuration and settings specified in this command.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1)
- /*
- * When this bit is set to '1', the link shall be forced to be
- * taken down. # When this bit is set to '1", all other command
- * input settings related to the link speed shall be ignored.
- * Once the link state is forced down, it can be explicitly
- * cleared from that state by setting this flag to '0'. # If
- * this flag is set to '0', then the link shall be cleared from
- * forced down state if the link is in forced down state. There
- * may be conditions (e.g. out-of-band or sideband configuration
- * changes for the link) outside the scope of the HWRM
- * implementation that may clear forced down link state.
- */
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DOWN UINT32_C(0x2)
+ /* deprecated bit. Do not use!!! */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED UINT32_C(0x2)
/*
* When this bit is set to '1', the link shall be forced to the
* force_link_speed value. When this bit is set to '1', the HWRM
@@ -3872,14 +3498,14 @@ struct hwrm_port_phy_cfg_input {
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8)
/*
- * When this bit is set to '1', Energy Efficient Ethernet (EEE)
+ * When this bit is set to '1', Energy Efficient Ethernet (EEE)
* is requested to be enabled on this link. If EEE is not
* supported on this port, then this flag shall be ignored by
* the HWRM.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE UINT32_C(0x10)
/*
- * When this bit is set to '1', Energy Efficient Ethernet (EEE)
+ * When this bit is set to '1', Energy Efficient Ethernet (EEE)
* is requested to be disabled on this link. If EEE is not
* supported on this port, then this flag shall be ignored by
* the HWRM.
@@ -3914,35 +3540,53 @@ struct hwrm_port_phy_cfg_input {
* then this flag shall be ignored. If FEC autonegotiation is
* not supported, then the HWRM shall ignore this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE UINT32_C(0x200)
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \
+ UINT32_C(0x200)
/*
- * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire
* Code) on this port if supported. When set to 0, then this
* flag shall be ignored. If FEC CLAUSE 74 is not supported,
* then the HWRM shall ignore this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE UINT32_C(0x400)
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \
+ UINT32_C(0x400)
/*
* When set to 1, then the HWRM shall disable FEC CLAUSE 74
- * (Fire Code) on this port if supported. When set to 0, then
+ * (Fire Code) on this port if supported. When set to 0, then
* this flag shall be ignored. If FEC CLAUSE 74 is not
* supported, then the HWRM shall ignore this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE UINT32_C(0x800)
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \
+ UINT32_C(0x800)
/*
- * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed
* Solomon) on this port if supported. When set to 0, then this
* flag shall be ignored. If FEC CLAUSE 91 is not supported,
* then the HWRM shall ignore this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE UINT32_C(0x1000)
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \
+ UINT32_C(0x1000)
/*
* When set to 1, then the HWRM shall disable FEC CLAUSE 91
- * (Reed Solomon) on this port if supported. When set to 0, then
+ * (Reed Solomon) on this port if supported. When set to 0, then
* this flag shall be ignored. If FEC CLAUSE 91 is not
* supported, then the HWRM shall ignore this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE UINT32_C(0x2000)
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \
+ UINT32_C(0x2000)
+ /*
+ * When this bit is set to '1', the link shall be forced to be
+ * taken down. # When this bit is set to '1", all other command
+ * input settings related to the link speed shall be ignored.
+ * Once the link state is forced down, it can be explicitly
+ * cleared from that state by setting this flag to '0'. # If
+ * this flag is set to '0', then the link shall be cleared from
+ * forced down state if the link is in forced down state. There
+ * may be conditions (e.g. out-of-band or sideband configuration
+ * changes for the link) outside the scope of the HWRM
+ * implementation that may clear forced down link state.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN UINT32_C(0x4000)
uint32_t enables;
/* This bit must be '1' for the auto_mode field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1)
@@ -3959,7 +3603,8 @@ struct hwrm_port_phy_cfg_input {
* This bit must be '1' for the auto_link_speed_mask field to be
* configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK UINT32_C(0x10)
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \
+ UINT32_C(0x10)
/* This bit must be '1' for the wirespeed field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIOUTPUTEED UINT32_C(0x20)
/* This bit must be '1' for the lpbk field to be configured. */
@@ -3972,7 +3617,8 @@ struct hwrm_port_phy_cfg_input {
* This bit must be '1' for the eee_link_speed_mask field to be
* configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK UINT32_C(0x200)
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \
+ UINT32_C(0x200)
/* This bit must be '1' for the tx_lpi_timer field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER UINT32_C(0x400)
uint16_t port_id;
@@ -4110,34 +3756,42 @@ struct hwrm_port_phy_cfg_input {
* autoneg_mode is "mask". If unsupported speed is enabled an
* error will be generated.
*/
- /* 100Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
/* 2Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB UINT32_C(0x10)
/* 2.5Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB UINT32_C(0x20)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \
+ UINT32_C(0x20)
/* 10Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
/* 20Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
/* 25Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB UINT32_C(0x100)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \
+ UINT32_C(0x100)
/* 40Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB UINT32_C(0x200)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \
+ UINT32_C(0x200)
/* 50Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB UINT32_C(0x400)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \
+ UINT32_C(0x400)
/* 100Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB UINT32_C(0x2000)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \
+ UINT32_C(0x2000)
uint8_t wirespeed;
/* This value controls the wirespeed feature. */
/* Wirespeed feature is disabled. */
@@ -4180,7 +3834,7 @@ struct hwrm_port_phy_cfg_input {
uint32_t preemphasis;
/*
* This value controls the pre-emphasis to be used for the link.
- * Driver should not set this value (use enable.preemphasis = 0)
+ * Driver should not set this value (use enable.preemphasis = 0)
* unless driver is sure of setting. Normally HWRM FW will
* determine proper pre-emphasis.
*/
@@ -4195,16 +3849,16 @@ struct hwrm_port_phy_cfg_input {
*/
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
+ /* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
+ /* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
/* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
/* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
uint8_t unused_2;
@@ -4215,11 +3869,11 @@ struct hwrm_port_phy_cfg_input {
* Reuested setting of TX LPI timer in microseconds. This field
* is valid only when EEE is enabled and TX LPI is enabled.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_port_phy_cfg_output {
uint16_t error_code;
/*
@@ -4253,7 +3907,7 @@ struct hwrm_port_phy_cfg_output {
/* hwrm_port_phy_qcfg */
/* Description: This command queries the PHY configuration for the port. */
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_port_phy_qcfg_input {
uint16_t req_type;
/*
@@ -4286,7 +3940,7 @@ struct hwrm_port_phy_qcfg_input {
uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (96 bytes) */
+/* Output (96 bytes) */
struct hwrm_port_phy_qcfg_output {
uint16_t error_code;
/*
@@ -4364,50 +4018,47 @@ struct hwrm_port_phy_qcfg_output {
* each speed that is supported, the corrresponding bit will be
* set to '1'.
*/
- /* 100Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD \
- UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB UINT32_C(0x8)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB UINT32_C(0x10)
/* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
/* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
/* 20Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
/* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
/* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
/* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
/* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
uint16_t force_link_speed;
/*
* Current setting of forced link speed. When the link speed is
* not being forced, this value shall be set to 0.
*/
/* 100Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB \
- UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
/* 1Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
/* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB \
- UINT32_C(0x19)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
/* 20Mb link speed */
@@ -4415,14 +4066,13 @@ struct hwrm_port_phy_qcfg_output {
/* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
/* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
/* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \
- UINT32_C(0x3e8)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
uint8_t auto_mode;
/* Current setting of auto negotiation mode. */
/*
@@ -4444,8 +4094,7 @@ struct hwrm_port_phy_qcfg_output {
* DEPRECATED. An HWRM client should not use
* this mode.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW \
- UINT32_C(0x3)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
/*
* Select the speeds based on the corresponding
* link speed mask value that is provided.
@@ -4479,8 +4128,7 @@ struct hwrm_port_phy_qcfg_output {
* set to 1, auto_pause bits should be ignored and should be set
* to 0.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE \
- UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
uint16_t auto_link_speed;
/*
* Current setting for auto_link_speed. This field is only valid
@@ -4505,9 +4153,9 @@ struct hwrm_port_phy_qcfg_output {
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
uint16_t auto_link_speed_mask;
/*
* Current setting for auto_link_speed_mask that is used to
@@ -4516,23 +4164,22 @@ struct hwrm_port_phy_qcfg_output {
* in this field shall be a subset of supported speeds on this
* port.
*/
- /* 100Mb link speed (Half-duplex) */
+ /* 100Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \
UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \
UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \
UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB \
- UINT32_C(0x8)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \
UINT32_C(0x10)
/* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \
UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \
@@ -4550,12 +4197,12 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \
UINT32_C(0x400)
/* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \
UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
+ /* 10Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \
UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
+ /* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \
UINT32_C(0x2000)
uint8_t wirespeed;
@@ -4604,19 +4251,15 @@ struct hwrm_port_phy_qcfg_output {
/* Module is inserted and accepted */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE UINT32_C(0x0)
/* Module is rejected and transmit side Laser is disabled. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX \
- UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX UINT32_C(0x1)
/* Module mismatch warning. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG \
- UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG UINT32_C(0x2)
/* Module is rejected and powered down. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN UINT32_C(0x3)
/* Module is not inserted. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
- UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED UINT32_C(0x4)
/* Module status is not applicable. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
- UINT32_C(0xff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE UINT32_C(0xff)
uint32_t preemphasis;
/* Current setting for preemphasis. */
uint8_t phy_maj;
@@ -4631,13 +4274,13 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN UINT32_C(0x0)
/* BASE-CR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR UINT32_C(0x1)
- /* BASE-KR4 (Deprecated) */
+ /* BASE-KR4 (Deprecated) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 UINT32_C(0x2)
/* BASE-LR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR UINT32_C(0x3)
/* BASE-SR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR UINT32_C(0x4)
- /* BASE-KR2 (Deprecated) */
+ /* BASE-KR2 (Deprecated) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 UINT32_C(0x5)
/* BASE-KX */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX UINT32_C(0x6)
@@ -4649,6 +4292,34 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE UINT32_C(0x9)
/* SGMII connected external PHY */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY UINT32_C(0xa)
+ /* 25G_BASECR_CA_L */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L UINT32_C(0xb)
+ /* 25G_BASECR_CA_S */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S UINT32_C(0xc)
+ /* 25G_BASECR_CA_N */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N UINT32_C(0xd)
+ /* 25G_BASESR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR UINT32_C(0xe)
+ /* 100G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 UINT32_C(0xf)
+ /* 100G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 UINT32_C(0x10)
+ /* 100G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 UINT32_C(0x11)
+ /* 100G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 UINT32_C(0x12)
+ /* 100G_BASESR10 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 UINT32_C(0x13)
+ /* 40G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 UINT32_C(0x14)
+ /* 40G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 UINT32_C(0x15)
+ /* 40G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 UINT32_C(0x16)
+ /* 40G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 UINT32_C(0x17)
+ /* 40G_ACTIVE_CABLE */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE UINT32_C(0x18)
uint8_t media_type;
/* This value represents a media type. */
/* Unknown */
@@ -4662,35 +4333,32 @@ struct hwrm_port_phy_qcfg_output {
uint8_t xcvr_pkg_type;
/* This value represents a transceiver type. */
/* PHY and MAC are in the same package */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
- UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL UINT32_C(0x1)
/* PHY and MAC are in different packages */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
- UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL UINT32_C(0x2)
uint8_t eee_config_phy_addr;
/*
* This field represents flags related to EEE configuration.
* These EEE configuration flags are valid only when the
- * auto_mode is not set to none (in other words autonegotiation
+ * auto_mode is not set to none (in other words autonegotiation
* is enabled).
*/
/* This field represents PHY address. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK UINT32_C(0x1f)
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0
/*
- * When set to 1, Energy Efficient Ethernet (EEE) mode is
+ * When set to 1, Energy Efficient Ethernet (EEE) mode is
* enabled. Speeds for autoneg with EEE mode enabled are based
* on eee_link_speed_mask.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED \
- UINT32_C(0x20)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED UINT32_C(0x20)
/*
* This flag is valid only when eee_enabled is set to 1. # If
* eee_enabled is set to 0, then EEE mode is disabled and this
* flag shall be ignored. # If eee_enabled is set to 1 and this
- * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
+ * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
* is enabled and in use. # If eee_enabled is set to 1 and this
- * flag is set to 0, then Energy Efficient Ethernet (EEE) mode
+ * flag is set to 0, then Energy Efficient Ethernet (EEE) mode
* is enabled but is currently not in use.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE UINT32_C(0x40)
@@ -4698,16 +4366,16 @@ struct hwrm_port_phy_qcfg_output {
* This flag is valid only when eee_enabled is set to 1. # If
* eee_enabled is set to 0, then EEE mode is disabled and this
* flag shall be ignored. # If eee_enabled is set to 1 and this
- * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
+ * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
* is enabled and TX LPI is enabled. # If eee_enabled is set to
* 1 and this flag is set to 0, then Energy Efficient Ethernet
- * (EEE) mode is enabled but TX LPI is disabled.
+ * (EEE) mode is enabled but TX LPI is disabled.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI UINT32_C(0x80)
/*
* This field represents flags related to EEE configuration.
* These EEE configuration flags are valid only when the
- * auto_mode is not set to none (in other words autonegotiation
+ * auto_mode is not set to none (in other words autonegotiation
* is enabled).
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK UINT32_C(0xe0)
@@ -4729,16 +4397,16 @@ struct hwrm_port_phy_qcfg_output {
* The advertised speeds for the port by the link partner. Each
* advertised speed will be set to '1'.
*/
- /* 100Mb link speed (Half-duplex) */
+ /* 100Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \
UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
+ /* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \
UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
+ /* 1Gb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \
UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
+ /* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \
UINT32_C(0x8)
/* 2Gb link speed */
@@ -4765,10 +4433,10 @@ struct hwrm_port_phy_qcfg_output {
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \
UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
+ /* 10Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \
UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
+ /* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \
UINT32_C(0x2000)
uint8_t link_partner_adv_auto_mode;
@@ -4783,9 +4451,8 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
UINT32_C(0x0)
/* Select all possible speeds for autoneg mode. */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
- UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
+ UINT32_C(0x1)
/*
* Select only the auto_link_speed speed for
* autoneg mode. This mode has been DEPRECATED.
@@ -4799,16 +4466,14 @@ struct hwrm_port_phy_qcfg_output {
* DEPRECATED. An HWRM client should not use
* this mode.
*/
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
- UINT32_C(0x3)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
+ UINT32_C(0x3)
/*
* Select the speeds based on the corresponding
* link speed mask value that is provided.
*/
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
- UINT32_C(0x4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
+ UINT32_C(0x4)
uint8_t link_partner_adv_pause;
/* The advertised pause settings on the port by the link partner. */
/*
@@ -4834,13 +4499,13 @@ struct hwrm_port_phy_qcfg_output {
/* Reserved */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
+ /* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \
UINT32_C(0x2)
/* Reserved */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
+ /* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \
UINT32_C(0x8)
/* Reserved */
@@ -4859,33 +4524,26 @@ struct hwrm_port_phy_qcfg_output {
* when eee_enabled flags is set to 1.
*/
/* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
- UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
- UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
/* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
- UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
- UINT32_C(0x8)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
/* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
- UINT32_C(0x10)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
/* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
- UINT32_C(0x20)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
/* 10Gb link speed */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
- UINT32_C(0x40)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
uint32_t xcvr_identifier_type_tx_lpi_timer;
/* This value represents transceiver identifier type. */
/*
@@ -4893,32 +4551,31 @@ struct hwrm_port_phy_qcfg_output {
* is valid only when_eee_enabled flag is set to 1 and
* tx_lpi_enabled is set to 1.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \
- UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
#define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
/* This value represents transceiver identifier type. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
UINT32_C(0xff000000)
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
/* Unknown */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
(UINT32_C(0x0) << 24)
/* SFP/SFP+/SFP28 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
(UINT32_C(0x3) << 24)
/* QSFP */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
(UINT32_C(0xc) << 24)
/* QSFP+ */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
(UINT32_C(0xd) << 24)
/* QSFP28 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
(UINT32_C(0x11) << 24)
uint16_t fec_cfg;
/*
* This value represents the current configuration of Forward
- * Error Correction (FEC) on the port.
+ * Error Correction (FEC) on the port.
*/
/*
* When set to 1, then FEC is not supported on this port. If
@@ -4929,7 +4586,7 @@ struct hwrm_port_phy_qcfg_output {
* then the HWRM shall set this flag to 1 when reporting FEC
* capability.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
UINT32_C(0x1)
/*
* When set to 1, then FEC autonegotiation is supported on this
@@ -4947,30 +4604,30 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \
UINT32_C(0x4)
/*
- * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on
- * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on
+ * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
* not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \
UINT32_C(0x8)
/*
- * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on
- * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on
+ * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
* disabled if supported. This flag should be ignored if FEC
* CLAUSE 74 is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
UINT32_C(0x10)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported
- * on this port. When set to 0, then FEC CLAUSE 91 (Reed
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported
+ * on this port. When set to 0, then FEC CLAUSE 91 (Reed
* Solomon) is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
UINT32_C(0x20)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled
- * on this port. When set to 0, then FEC CLAUSE 91 (Reed
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled
+ * on this port. When set to 0, then FEC CLAUSE 91 (Reed
* Solomon) is disabled if supported. This flag should be
* ignored if FEC CLAUSE 91 is not supported on this port.
*/
@@ -5006,19 +4663,10 @@ struct hwrm_port_phy_qcfg_output {
*/
} __attribute__((packed));
-/* hwrm_queue_qportcfg */
-/*
- * Description: This function is called by a driver to query queue configuration
- * of a port. # The HWRM shall at least advertise one queue with lossy service
- * profile. # The driver shall use this command to query queue ids before
- * configuring or using any queues. # If a service profile is not set for a
- * queue, then the driver shall not use that queue without configuring a service
- * profile for it. # If the driver is not allowed to configure service profiles,
- * then the driver shall only use queues for which service profiles are pre-
- * configured.
- */
-/* Input (24 bytes) */
-struct hwrm_queue_qportcfg_input {
+/* hwrm_port_qstats */
+/* Description: This function returns per port Ethernet statistics. */
+/* Input (40 bytes) */
+struct hwrm_port_qstats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -5045,29 +4693,20 @@ struct hwrm_queue_qportcfg_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
- /*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
- QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
uint16_t port_id;
- /*
- * Port ID of port for which the queue configuration is being
- * queried. This field is only required when sent by IPC.
- */
- uint16_t unused_0;
+ /* Port ID of port that is being queried. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2[3];
+ uint8_t unused_3;
+ uint64_t tx_stat_host_addr;
+ /* This is the host address where Tx port statistics will be stored */
+ uint64_t rx_stat_host_addr;
+ /* This is the host address where Rx port statistics will be stored */
} __attribute__((packed));
-/* Output (32 bytes) */
-struct hwrm_queue_qportcfg_output {
+/* Output (16 bytes) */
+struct hwrm_port_qstats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -5083,62 +4722,229 @@ struct hwrm_queue_qportcfg_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint8_t max_configurable_queues;
+ uint16_t tx_stat_size;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
/*
- * The maximum number of queues that can be configured on this
- * port. Valid values range from 1 through 8.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t max_configurable_lossless_queues;
+} __attribute__((packed));
+
+/* hwrm_port_clr_stats */
+/*
+ * Description: This function clears per port statistics. The HWRM shall not
+ * allow a VF driver to clear port statistics. The HWRM shall not allow a PF
+ * driver to clear port statistics in a partitioning mode. The HWRM may allow a
+ * PF driver to clear port statistics in the non-partitioning mode.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_clr_stats_input {
+ uint16_t req_type;
/*
- * The maximum number of lossless queues that can be configured
- * on this port. Valid values range from 0 through 8.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- uint8_t queue_cfg_allowed;
+ uint16_t cmpl_ring;
/*
- * Bitmask indicating which queues can be configured by the
- * hwrm_queue_cfg command. Each bit represents a specific queue
- * where bit 0 represents queue 0 and bit 7 represents queue 7.
- * # A value of 0 indicates that the queue is not configurable
- * by the hwrm_queue_cfg command. # A value of 1 indicates that
- * the queue is configurable. # A hwrm_queue_cfg command shall
- * return error when trying to configure a queue not
- * configurable.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- uint8_t queue_cfg_info;
- /* Information about queue configuration. */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * If this flag is set to '1', then the queues are configured
- * asymmetrically on TX and RX sides. If this flag is set to
- * '0', then the queues are configured symmetrically on TX and
- * RX sides. For symmetric configuration, the queue
- * configuration including queue ids and service profiles on the
- * TX side is the same as the corresponding queue configuration
- * on the RX side.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
- UINT32_C(0x1)
- uint8_t queue_pfcenable_cfg_allowed;
+ uint64_t resp_addr;
/*
- * Bitmask indicating which queues can be configured by the
- * hwrm_queue_pfcenable_cfg command. Each bit represents a
- * specific queue where bit 0 represents queue 0 and bit 7
- * represents queue 7. # A value of 0 indicates that the queue
- * is not configurable by the hwrm_queue_pfcenable_cfg command.
- * # A value of 1 indicates that the queue is configurable. # A
- * hwrm_queue_pfcenable_cfg command shall return error when
- * trying to configure a queue that is not configurable.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- uint8_t queue_pri2cos_cfg_allowed;
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_clr_stats_output {
+ uint16_t error_code;
/*
- * Bitmask indicating which queues can be configured by the
- * hwrm_queue_pri2cos_cfg command. Each bit represents a
- * specific queue where bit 0 represents queue 0 and bit 7
- * represents queue 7. # A value of 0 indicates that the queue
- * is not configurable by the hwrm_queue_pri2cos_cfg command. #
- * A value of 1 indicates that the queue is configurable. # A
- * hwrm_queue_pri2cos_cfg command shall return error when trying
- * to configure a queue that is not configurable.
- */
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_qportcfg */
+/*
+ * Description: This function is called by a driver to query queue configuration
+ * of a port. # The HWRM shall at least advertise one queue with lossy service
+ * profile. # The driver shall use this command to query queue ids before
+ * configuring or using any queues. # If a service profile is not set for a
+ * queue, then the driver shall not use that queue without configuring a service
+ * profile for it. # If the driver is not allowed to configure service profiles,
+ * then the driver shall only use queues for which service profiles are pre-
+ * configured.
+ */
+/* Input (24 bytes) */
+struct hwrm_queue_qportcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
+ QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
+ uint16_t port_id;
+ /*
+ * Port ID of port for which the queue configuration is being
+ * queried. This field is only required when sent by IPC.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+struct hwrm_queue_qportcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t max_configurable_queues;
+ /*
+ * The maximum number of queues that can be configured on this
+ * port. Valid values range from 1 through 8.
+ */
+ uint8_t max_configurable_lossless_queues;
+ /*
+ * The maximum number of lossless queues that can be configured
+ * on this port. Valid values range from 0 through 8.
+ */
+ uint8_t queue_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_cfg command. Each bit represents a specific queue
+ * where bit 0 represents queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_cfg command. # A value of 1 indicates that
+ * the queue is configurable. # A hwrm_queue_cfg command shall
+ * return error when trying to configure a queue not
+ * configurable.
+ */
+ uint8_t queue_cfg_info;
+ /* Information about queue configuration. */
+ /*
+ * If this flag is set to '1', then the queues are configured
+ * asymmetrically on TX and RX sides. If this flag is set to
+ * '0', then the queues are configured symmetrically on TX and
+ * RX sides. For symmetric configuration, the queue
+ * configuration including queue ids and service profiles on the
+ * TX side is the same as the corresponding queue configuration
+ * on the RX side.
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG UINT32_C(0x1)
+ uint8_t queue_pfcenable_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pfcenable_cfg command. Each bit represents a
+ * specific priority where bit 0 represents priority 0 and bit 7
+ * represents priority 7. # A value of 0 indicates that the
+ * priority is not configurable by the hwrm_queue_pfcenable_cfg
+ * command. # A value of 1 indicates that the priority is
+ * configurable. # A hwrm_queue_pfcenable_cfg command shall
+ * return error when trying to configure a priority that is not
+ * configurable.
+ */
+ uint8_t queue_pri2cos_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pri2cos_cfg command. Each bit represents a
+ * specific queue where bit 0 represents queue 0 and bit 7
+ * represents queue 7. # A value of 0 indicates that the queue
+ * is not configurable by the hwrm_queue_pri2cos_cfg command. #
+ * A value of 1 indicates that the queue is configurable. # A
+ * hwrm_queue_pri2cos_cfg command shall return error when trying
+ * to configure a queue that is not configurable.
+ */
uint8_t queue_cos2bw_cfg_allowed;
/*
* Bitmask indicating which queues can be configured by the
@@ -5162,14 +4968,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id0_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
@@ -5186,14 +4992,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id1_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
@@ -5210,14 +5016,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id2_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
@@ -5234,14 +5040,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id3_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
@@ -5258,14 +5064,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id4_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
@@ -5282,14 +5088,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id5_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
@@ -5306,14 +5112,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id6_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
@@ -5330,14 +5136,14 @@ struct hwrm_queue_qportcfg_output {
*/
uint8_t queue_id7_service_profile;
/* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
+ /* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
- * Set to 0xFF... (All Fs) if there is no
+ * Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
@@ -5370,7 +5176,7 @@ struct hwrm_queue_qportcfg_output {
* enabled, then the internal VNIC to SVIF mapping data structures shall be
* programmed at the time of VNIC allocation.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_vnic_alloc_input {
uint16_t req_type;
/*
@@ -5407,7 +5213,7 @@ struct hwrm_vnic_alloc_input {
uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_vnic_alloc_output {
uint16_t error_code;
/*
@@ -5446,7 +5252,7 @@ struct hwrm_vnic_alloc_output {
* VNIC as well as the VNIC. Reset and release all resources associated with the
* VNIC.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_vnic_free_input {
uint16_t req_type;
/*
@@ -5479,7 +5285,7 @@ struct hwrm_vnic_free_input {
uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_vnic_free_output {
uint16_t error_code;
/*
@@ -5513,7 +5319,7 @@ struct hwrm_vnic_free_output {
/* hwrm_vnic_cfg */
/* Description: Configure the RX VNIC structure. */
-/* Input (40 bytes) */
+/* Input (40 bytes) */
struct hwrm_vnic_cfg_input {
uint16_t req_type;
/*
@@ -5573,10 +5379,10 @@ struct hwrm_vnic_cfg_input {
* roce_dual_vnic_mode flag is set to '1', then the HWRM client
* shall not set this flag to '1'.
*/
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
/*
* When a VNIC uses one destination ring group for certain
- * application (e.g. Receive Flow Steering) where exact match is
+ * application (e.g. Receive Flow Steering) where exact match is
* used to direct packets to a VNIC with one destination ring
* group only, there is no need to configure RSS indirection
* table for that VNIC as only one destination ring group is
@@ -5612,17 +5418,17 @@ struct hwrm_vnic_cfg_input {
*/
uint16_t rss_rule;
/*
- * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
* there is no RSS rule.
*/
uint16_t cos_rule;
/*
- * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
* there is no COS rule.
*/
uint16_t lb_rule;
/*
- * RSS ID for load balancing rule/table structure. 0xFF... (All
+ * RSS ID for load balancing rule/table structure. 0xFF... (All
* Fs) if there is no LB rule.
*/
uint16_t mru;
@@ -5636,7 +5442,7 @@ struct hwrm_vnic_cfg_input {
uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_vnic_cfg_output {
uint16_t error_code;
/*
@@ -5674,32 +5480,33 @@ struct hwrm_vnic_cfg_output {
* driver to query its own VNIC resource or VNIC resource of its child VF. This
* function can also be used by a VF driver to query its own VNIC resource.
*/
-/* Input (32 bytes) */
+/* Input (32 bytes) */
struct hwrm_vnic_qcfg_input {
uint16_t req_type;
/*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the vf_id_valid field to be configured. */
@@ -5709,14 +5516,14 @@ struct hwrm_vnic_qcfg_input {
uint16_t vf_id;
/* ID of Virtual Function whose VNIC resource is being queried. */
uint16_t unused_0[3];
-};
+} __attribute__((packed));
-/* Output (32 bytes) */
+/* Output (32 bytes) */
struct hwrm_vnic_qcfg_output {
uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
@@ -5724,26 +5531,26 @@ struct hwrm_vnic_qcfg_output {
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
uint16_t dflt_ring_grp;
/* Default Completion ring for the VNIC. */
uint16_t rss_rule;
/*
- * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
- * RSS rule.
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
*/
uint16_t cos_rule;
/*
- * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
- * COS rule.
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
*/
uint16_t lb_rule;
/*
- * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
- * there is no LB rule.
+ * RSS ID for load balancing rule/table structure. 0xFF... (All
+ * Fs) if there is no LB rule.
*/
uint16_t mru;
/* The maximum receive unit of the vnic. */
@@ -5751,44 +5558,49 @@ struct hwrm_vnic_qcfg_output {
uint8_t unused_1;
uint32_t flags;
/*
- * When this bit is '1', the VNIC is the default VNIC for the function.
+ * When this bit is '1', the VNIC is the default VNIC for the
+ * function.
*/
- #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT UINT32_C(0x1)
/*
- * When this bit is '1', the VNIC is configured to strip VLAN in the RX
- * path. If set to '0', then VLAN stripping is disabled on this VNIC.
+ * When this bit is '1', the VNIC is configured to strip VLAN in
+ * the RX path. If set to '0', then VLAN stripping is disabled
+ * on this VNIC.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
/*
- * When this bit is '1', the VNIC is configured to buffer receive
- * packets in the hardware until the host posts new receive buffers. If
- * set to '0', then bd_stall is disabled on this VNIC.
+ * When this bit is '1', the VNIC is configured to buffer
+ * receive packets in the hardware until the host posts new
+ * receive buffers. If set to '0', then bd_stall is disabled on
+ * this VNIC.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
/*
- * When this bit is '1', the VNIC is configured to receive both RoCE and
- * non-RoCE traffic. If set to '0', then this VNIC is not configured to
- * operate in dual VNIC mode.
+ * When this bit is '1', the VNIC is configured to receive both
+ * RoCE and non-RoCE traffic. If set to '0', then this VNIC is
+ * not configured to operate in dual VNIC mode.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
/*
- * When this flag is set to '1', the VNIC is configured to receive only
- * RoCE traffic. When this flag is set to '0', the VNIC is not
- * configured to receive only RoCE traffic. If roce_dual_vnic_mode flag
- * and this flag both are set to '1', then it is an invalid
- * configuration of the VNIC. The HWRM should not allow that type of
- * mis-configuration by HWRM clients.
+ * When this flag is set to '1', the VNIC is configured to
+ * receive only RoCE traffic. When this flag is set to '0', the
+ * VNIC is not configured to receive only RoCE traffic. If
+ * roce_dual_vnic_mode flag and this flag both are set to '1',
+ * then it is an invalid configuration of the VNIC. The HWRM
+ * should not allow that type of mis-configuration by HWRM
+ * clients.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
/*
- * When a VNIC uses one destination ring group for certain application
- * (e.g. Receive Flow Steering) where exact match is used to direct
- * packets to a VNIC with one destination ring group only, there is no
- * need to configure RSS indirection table for that VNIC as only one
- * destination ring group is used. When this bit is set to '1', then the
- * VNIC is enabled in a mode where RSS is enabled in the VNIC using a
- * RSS context for computing RSS hash but the RSS indirection table is
- * not configured.
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where exact match is
+ * used to direct packets to a VNIC with one destination ring
+ * group only, there is no need to configure RSS indirection
+ * table for that VNIC as only one destination ring group is
+ * used. When this bit is set to '1', then the VNIC is enabled
+ * in a mode where RSS is enabled in the VNIC using a RSS
+ * context for computing RSS hash but the RSS indirection table
+ * is not configured.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
uint32_t unused_2;
@@ -5797,17 +5609,18 @@ struct hwrm_vnic_qcfg_output {
uint8_t unused_5;
uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
-};
+} __attribute__((packed));
/* hwrm_vnic_rss_cfg */
/* Description: This function is used to enable RSS configuration. */
-/* Input (48 bytes) */
+/* Input (48 bytes) */
struct hwrm_vnic_rss_cfg_input {
uint16_t req_type;
/*
@@ -5880,7 +5693,7 @@ struct hwrm_vnic_rss_cfg_input {
uint16_t unused_1[3];
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_vnic_rss_cfg_output {
uint16_t error_code;
/*
@@ -5914,7 +5727,7 @@ struct hwrm_vnic_rss_cfg_output {
/* hwrm_vnic_rss_cos_lb_ctx_alloc */
/* Description: This function is used to allocate COS/Load Balance context. */
-/* Input (16 bytes) */
+/* Input (16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
uint16_t req_type;
/*
@@ -5944,7 +5757,7 @@ struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
*/
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
uint16_t error_code;
/*
@@ -5981,7 +5794,7 @@ struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
/* hwrm_vnic_rss_cos_lb_ctx_free */
/* Description: This function can be used to free COS/Load Balance context. */
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_free_input {
uint16_t req_type;
/*
@@ -6014,7 +5827,7 @@ struct hwrm_vnic_rss_cos_lb_ctx_free_input {
uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_free_output {
uint16_t error_code;
/*
@@ -6050,7 +5863,7 @@ struct hwrm_vnic_rss_cos_lb_ctx_free_output {
/*
* Description: This command allocates and does basic preparation for a ring.
*/
-/* Input (80 bytes) */
+/* Input (80 bytes) */
struct hwrm_ring_alloc_input {
uint16_t req_type;
/*
@@ -6096,12 +5909,14 @@ struct hwrm_ring_alloc_input {
#define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
uint8_t ring_type;
/* Ring Type. */
- /* Completion Ring (CR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
#define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
+ /* RX Ring (RR) */
#define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
uint8_t unused_0;
uint16_t unused_1;
uint64_t page_tbl_addr;
@@ -6164,23 +5979,21 @@ struct hwrm_ring_alloc_input {
* a TX ring.
*/
/* Arbitration policy used for the ring. */
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
- UINT32_C(0xf)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK UINT32_C(0xf)
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
/*
* Use strict priority for the TX ring. Priority
* value is specified in arb_policy_param
*/
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
- (UINT32_C(0x1) << 0)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP (UINT32_C(0x1) << 0)
/*
* Use weighted fair queue arbitration for the
* TX ring. Weight is specified in
* arb_policy_param
*/
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
(UINT32_C(0x2) << 0)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
/* Reserved field. */
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK UINT32_C(0xf0)
@@ -6197,7 +6010,7 @@ struct hwrm_ring_alloc_input {
*/
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
UINT32_C(0xff00)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
uint8_t unused_6;
uint8_t unused_7;
uint32_t reserved3;
@@ -6217,26 +6030,36 @@ struct hwrm_ring_alloc_input {
* translate this value into byte counter and time interval used
* for this ring inside the device.
*/
- /* Bandwidth value */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
+ /* The bandwidth value. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
- /* Reserved */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_RSVD UINT32_C(0x10000000)
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
+ RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mbps */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MBPS \
- (UINT32_C(0x0) << 29)
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA (UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
uint8_t int_mode;
/*
@@ -6256,7 +6079,7 @@ struct hwrm_ring_alloc_input {
uint8_t unused_8[3];
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_ring_alloc_output {
uint16_t error_code;
/*
@@ -6297,8 +6120,16 @@ struct hwrm_ring_alloc_output {
/* hwrm_ring_free */
/*
* Description: This command is used to free a ring and associated resources.
+ * With QoS and DCBx agents, it is possible the traffic classes will be moved
+ * from one CoS queue to another. When this occurs, the driver shall call
+ * 'hwrm_ring_free' to free the allocated rings and then call 'hwrm_ring_alloc'
+ * to re-allocate each ring and assign it to a new CoS queue. hwrm_ring_free
+ * shall be called on a ring only after it has been idle for 500ms or more and
+ * no frames have been posted to the ring during this time. All frames queued
+ * for transmission shall be completed and at least 500ms time elapsed from the
+ * last completion before calling this command.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_ring_free_input {
uint16_t req_type;
/*
@@ -6328,19 +6159,21 @@ struct hwrm_ring_free_input {
*/
uint8_t ring_type;
/* Ring Type. */
- /* Completion Ring (CR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
#define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
+ /* RX Ring (RR) */
#define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
uint8_t unused_0;
uint16_t ring_id;
/* Physical number of ring allocated. */
uint32_t unused_1;
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_ring_free_output {
uint16_t error_code;
/*
@@ -6376,7 +6209,7 @@ struct hwrm_ring_free_output {
/*
* Description: This API allocates and does basic preparation for a ring group.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_ring_grp_alloc_input {
uint16_t req_type;
/*
@@ -6411,7 +6244,7 @@ struct hwrm_ring_grp_alloc_input {
uint16_t ar;
/*
* This value identifies the aggregation RR associated with the
- * ring group. If this value is 0xFF... (All Fs), then no
+ * ring group. If this value is 0xFF... (All Fs), then no
* Aggregation ring will be set.
*/
uint16_t sc;
@@ -6421,7 +6254,7 @@ struct hwrm_ring_grp_alloc_input {
*/
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_ring_grp_alloc_output {
uint16_t error_code;
/*
@@ -6467,7 +6300,7 @@ struct hwrm_ring_grp_alloc_output {
* a part of executing this command, the HWRM shall reset all associated ring
* group resources.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_ring_grp_free_input {
uint16_t req_type;
/*
@@ -6500,7 +6333,7 @@ struct hwrm_ring_grp_free_input {
uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_ring_grp_free_output {
uint16_t error_code;
/*
@@ -6534,12 +6367,61 @@ struct hwrm_ring_grp_free_output {
/* hwrm_cfa_l2_filter_alloc */
/*
- * A filter is used to identify traffic that contains a matching set of
- * parameters like unicast or broadcast MAC address or a VLAN tag amongst
- * other things which then allows the ASIC to direct the incoming traffic
- * to an appropriate VNIC or Rx ring.
+ * Description: An L2 filter is a filter resource that is used to identify a
+ * vnic or ring for a packet based on layer 2 fields. Layer 2 fields for
+ * encapsulated packets include both outer L2 header and/or inner l2 header of
+ * encapsulated packet. The L2 filter resource covers the following OS specific
+ * L2 filters. Linux/FreeBSD (per function): # Broadcast enable/disable # List
+ * of individual multicast filters # All multicast enable/disable filter #
+ * Unicast filters # Promiscuous mode VMware: # Broadcast enable/disable (per
+ * physical function) # All multicast enable/disable (per function) # Unicast
+ * filters per ring or vnic # Promiscuous mode per PF Windows: # Broadcast
+ * enable/disable (per physical function) # List of individual multicast filters
+ * (Driver needs to advertise the maximum number of filters supported) # All
+ * multicast enable/disable per physical function # Unicast filters per vnic #
+ * Promiscuous mode per PF Implementation notes on the use of VNIC in this
+ * command: # By default, these filters belong to default vnic for the function.
+ * # Once these filters are set up, only destination VNIC can be modified. # If
+ * the destination VNIC is not specified in this command, then the HWRM shall
+ * only create an l2 context id. HWRM Implementation notes for multicast
+ * filters: # The hwrm_filter_alloc command can be used to set up multicast
+ * filters (perfect match or partial match). Each individual function driver can
+ * set up multicast filters independently. # The HWRM needs to keep track of
+ * multicast filters set up by function drivers and maintain multicast group
+ * replication records to enable a subset of functions to receive traffic for a
+ * specific multicast address. # When a specific multicast filter cannot be set,
+ * the HWRM shall return an error. In this error case, the driver should fall
+ * back to using one general filter (rather than specific) for all multicast
+ * traffic. # When the SR-IOV is enabled, the HWRM needs to additionally track
+ * source knockout per multicast group record. Examples of setting unicast
+ * filters: For a unicast MAC based filter, one can use a combination of the
+ * fields and masks provided in this command to set up the filter. Below are
+ * some examples: # MAC + no VLAN filter: This filter is used to identify
+ * traffic that does not contain any VLAN tags and matches destination (or
+ * source) MAC address. This filter can be set up by setting only l2_addr field
+ * to be a valid field. All other fields are not valid. The following value is
+ * set for l2_addr. l2_addr = MAC # MAC + Any VLAN filter: This filter is used
+ * to identify traffic that carries single VLAN tag and matches (destination or
+ * source) MAC address. This filter can be set up by setting only l2_addr and
+ * l2_ovlan_mask fields to be valid fields. All other fields are not valid. The
+ * following values are set for those two valid fields. l2_addr = MAC,
+ * l2_ovlan_mask = 0xFFFF # MAC + no VLAN or VLAN ID=0: This filter is used to
+ * identify untagged traffic that does not contain any VLAN tags or a VLAN tag
+ * with VLAN ID = 0 and matches destination (or source) MAC address. This filter
+ * can be set up by setting only l2_addr and l2_ovlan fields to be valid fields.
+ * All other fields are not valid. The following value are set for l2_addr and
+ * l2_ovlan. l2_addr = MAC, l2_ovlan = 0x0 # MAC + no VLAN or any VLAN: This
+ * filter is used to identify traffic that contains zero or 1 VLAN tag and
+ * matches destination (or source) MAC address. This filter can be set up by
+ * setting only l2_addr, l2_ovlan, and l2_mask fields to be valid fields. All
+ * other fields are not valid. The following value are set for l2_addr,
+ * l2_ovlan, and l2_mask fields. l2_addr = MAC, l2_ovlan = 0x0, l2_ovlan_mask =
+ * 0xFFFF # MAC + VLAN ID filter: This filter can be set up by setting only
+ * l2_addr, l2_ovlan, and l2_ovlan_mask fields to be valid fields. All other
+ * fields are not valid. The following values are set for those three valid
+ * fields. l2_addr = MAC, l2_ovlan = VLAN ID, l2_ovlan_mask = 0xF000
*/
-/* Input (96 bytes) */
+/* Input (96 bytes) */
struct hwrm_cfa_l2_filter_alloc_input {
uint16_t req_type;
/*
@@ -6578,7 +6460,7 @@ struct hwrm_cfa_l2_filter_alloc_input {
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
/* rx path */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
/*
* Setting of this flag indicates the applicability to the
@@ -6595,60 +6477,70 @@ struct hwrm_cfa_l2_filter_alloc_input {
* should not be specified. If this flag is set, then l2_*
* fields refer to fields of outermost L2 header.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
uint32_t enables;
/* This bit must be '1' for the l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
/* This bit must be '1' for the l2_addr_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK UINT32_C(0x2)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
+ UINT32_C(0x2)
/* This bit must be '1' for the l2_ovlan field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
/*
* This bit must be '1' for the l2_ovlan_mask field to be
* configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK UINT32_C(0x8)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
+ UINT32_C(0x8)
/* This bit must be '1' for the l2_ivlan field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
/*
* This bit must be '1' for the l2_ivlan_mask field to be
* configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK UINT32_C(0x20)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
+ UINT32_C(0x20)
/* This bit must be '1' for the t_l2_addr field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
/*
* This bit must be '1' for the t_l2_addr_mask field to be
* configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK UINT32_C(0x80)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
+ UINT32_C(0x80)
/* This bit must be '1' for the t_l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN UINT32_C(0x100)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
+ UINT32_C(0x100)
/*
* This bit must be '1' for the t_l2_ovlan_mask field to be
* configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK UINT32_C(0x200)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
+ UINT32_C(0x200)
/* This bit must be '1' for the t_l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN UINT32_C(0x400)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
+ UINT32_C(0x400)
/*
* This bit must be '1' for the t_l2_ivlan_mask field to be
* configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK UINT32_C(0x800)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
+ UINT32_C(0x800)
/* This bit must be '1' for the src_type field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000)
/* This bit must be '1' for the src_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
/* This bit must be '1' for the tunnel_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x4000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x4000)
/* This bit must be '1' for the dst_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
/*
* This bit must be '1' for the mirror_vnic_id field to be
* configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x10000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x10000)
uint8_t l2_addr[6];
/*
* This value sets the match value for the L2 MAC address.
@@ -6736,34 +6628,34 @@ struct hwrm_cfa_l2_filter_alloc_input {
uint8_t tunnel_type;
/* Tunnel Type. */
/* Non-tunnel */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
/*
* Network Virtualization Generic Routing
- * Encapsulation (NVGRE)
+ * Encapsulation (NVGRE)
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
/*
- * Generic Routing Encapsulation (GRE) inside
+ * Generic Routing Encapsulation (GRE) inside
* Ethernet payload
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
/* IP in IP */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
+ /* Stateless Transport Tunnel (STT) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
/*
- * Generic Routing Encapsulation (GRE) inside IP
+ * Generic Routing Encapsulation (GRE) inside IP
* datagram payload
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
/* Any tunneled traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
uint8_t unused_7;
uint16_t dst_id;
/*
@@ -6779,11 +6671,11 @@ struct hwrm_cfa_l2_filter_alloc_input {
* filter table.
*/
/* No preference */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER UINT32_C(0x0)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER UINT32_C(0x0)
/* Above the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER UINT32_C(0x1)
/* Below the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER UINT32_C(0x2)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER UINT32_C(0x2)
/* As high as possible */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3)
/* As low as possible */
@@ -6798,7 +6690,7 @@ struct hwrm_cfa_l2_filter_alloc_input {
*/
} __attribute__((packed));
-/* Output (24 bytes) */
+/* Output (24 bytes) */
struct hwrm_cfa_l2_filter_alloc_output {
uint16_t error_code;
/*
@@ -6846,7 +6738,7 @@ struct hwrm_cfa_l2_filter_alloc_output {
* Description: Free a L2 filter. The HWRM shall free all associated filter
* resources with the L2 filter.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_cfa_l2_filter_free_input {
uint16_t req_type;
/*
@@ -6881,7 +6773,7 @@ struct hwrm_cfa_l2_filter_free_input {
*/
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_cfa_l2_filter_free_output {
uint16_t error_code;
/*
@@ -6915,7 +6807,7 @@ struct hwrm_cfa_l2_filter_free_output {
/* hwrm_cfa_l2_filter_cfg */
/* Description: Change the configuration of an existing L2 filter */
-/* Input (40 bytes) */
+/* Input (40 bytes) */
struct hwrm_cfa_l2_filter_cfg_input {
uint16_t req_type;
/*
@@ -6954,7 +6846,7 @@ struct hwrm_cfa_l2_filter_cfg_input {
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
/* rx path */
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
/*
* Setting of this flag indicates drop action. If this flag is
@@ -6968,7 +6860,8 @@ struct hwrm_cfa_l2_filter_cfg_input {
* This bit must be '1' for the new_mirror_vnic_id field to be
* configured.
*/
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID UINT32_C(0x2)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ UINT32_C(0x2)
uint64_t l2_filter_id;
/*
* This value identifies a set of CFA data structures used for
@@ -6984,7 +6877,7 @@ struct hwrm_cfa_l2_filter_cfg_input {
/* New Logical VNIC ID of the VNIC where traffic is mirrored. */
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_cfa_l2_filter_cfg_output {
uint16_t error_code;
/*
@@ -7018,7 +6911,7 @@ struct hwrm_cfa_l2_filter_cfg_output {
/* hwrm_cfa_l2_set_rx_mask */
/* Description: This command will set rx mask of the function. */
-/* Input (56 bytes) */
+/* Input (56 bytes) */
struct hwrm_cfa_l2_set_rx_mask_input {
uint16_t req_type;
/*
@@ -7071,14 +6964,14 @@ struct hwrm_cfa_l2_set_rx_mask_input {
* the promiscuous mode. The HWRM should accept any function to
* set up promiscuous mode. The HWRM shall follow the semantics
* below for the promiscuous mode support. # When partitioning
- * is not enabled on a port (i.e. single PF on the port), then
+ * is not enabled on a port (i.e. single PF on the port), then
* the PF shall be allowed to be in the promiscuous mode. When
* the PF is in the promiscuous mode, then it shall receive all
* host bound traffic on that port. # When partitioning is
- * enabled on a port (i.e. multiple PFs per port) and a PF on
+ * enabled on a port (i.e. multiple PFs per port) and a PF on
* that port is in the promiscuous mode, then the PF receives
* all traffic within that partition as identified by a unique
- * identifier for the PF (e.g. S-Tag). If a unique outer VLAN
+ * identifier for the PF (e.g. S-Tag). If a unique outer VLAN
* for the PF is specified, then the setting of promiscuous mode
* on that PF shall result in the PF receiving all host bound
* traffic with matching outer VLAN. # A VF shall can be set in
@@ -7091,7 +6984,7 @@ struct hwrm_cfa_l2_set_rx_mask_input {
* mode on a function independently from the promiscuous mode
* settings on other functions.
*/
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
/*
* If this flag is set, the corresponding RX filters shall be
* set up to cover multicast/broadcast filters for the outermost
@@ -7124,7 +7017,8 @@ struct hwrm_cfa_l2_set_rx_mask_input {
* set at most one flag out of vlanonly, vlan_nonvlan, and
* anyvlan_nonvlan.
*/
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN UINT32_C(0x100)
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
+ UINT32_C(0x100)
uint64_t mc_tbl_addr;
/* This is the address for mcast address tbl. */
uint32_t num_mc_entries;
@@ -7147,7 +7041,7 @@ struct hwrm_cfa_l2_set_rx_mask_input {
uint32_t unused_1;
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_cfa_l2_set_rx_mask_output {
uint16_t error_code;
/*
@@ -7179,24 +7073,13 @@ struct hwrm_cfa_l2_set_rx_mask_output {
*/
} __attribute__((packed));
-/* hwrm_tunnel_dst_port_alloc */
+/* hwrm_tunnel_dst_port_query */
/*
- * Description: This function is called by a driver to allocate l4 destination
- * port for a specific tunnel type. The destination port value is provided in
- * the input. If the HWRM supports only one global destination port for a tunnel
- * type, then the HWRM shall keep track of its usage as described below. # The
- * first caller that allocates a destination port shall always succeed and the
- * HWRM shall save the destination port configuration for that tunnel type and
- * increment the usage count to 1. # Subsequent callers allocating the same
- * destination port for that tunnel type shall succeed and the HWRM shall
- * increment the usage count for that port for each subsequent caller that
- * succeeds. # Any subsequent caller trying to allocate a different destination
- * port for that tunnel type shall fail until the usage count for the original
- * destination port goes to zero. # A caller that frees a port will cause the
- * usage count for that port to decrement.
+ * Description: This function is called by a driver to query tunnel type
+ * specific destination port configuration.
*/
/* Input (24 bytes) */
-struct hwrm_tunnel_dst_port_alloc_input {
+struct hwrm_tunnel_dst_port_query_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7226,24 +7109,14 @@ struct hwrm_tunnel_dst_port_alloc_input {
uint8_t tunnel_type;
/* Tunnel Type. */
/* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
/* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- uint8_t unused_0;
- uint16_t tunnel_dst_port_val;
- /*
- * This field represents the value of L4 destination port used
- * for the given tunnel type. This field is valid for specific
- * tunnel types that use layer 4 (e.g. UDP) transports for
- * tunneling. This field is in network byte order. A value of 0
- * shall fail the command.
- */
- uint32_t unused_1;
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ uint8_t unused_0[7];
} __attribute__((packed));
/* Output (16 bytes) */
-struct hwrm_tunnel_dst_port_alloc_output {
+struct hwrm_tunnel_dst_port_query_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7261,15 +7134,22 @@ struct hwrm_tunnel_dst_port_alloc_output {
*/
uint16_t tunnel_dst_port_id;
/*
- * Identifier of a tunnel L4 destination port value. Only
- * applies to tunnel types that has l4 destination port
- * parameters.
+ * This field represents the identifier of L4 destination port
+ * used for the given tunnel type. This field is valid for
+ * specific tunnel types that use layer 4 (e.g. UDP) transports
+ * for tunneling.
+ */
+ uint16_t tunnel_dst_port_val;
+ /*
+ * This field represents the value of L4 destination port
+ * identified by tunnel_dst_port_id. This field is valid for
+ * specific tunnel types that use layer 4 (e.g. UDP) transports
+ * for tunneling. This field is in network byte order. A value
+ * of 0 means that the destination port is not configured.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- uint8_t unused_3;
- uint8_t unused_4;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
@@ -7281,13 +7161,24 @@ struct hwrm_tunnel_dst_port_alloc_output {
*/
} __attribute__((packed));
-/* hwrm_tunnel_dst_port_free */
+/* hwrm_tunnel_dst_port_alloc */
/*
- * Description: This function is called by a driver to free l4 destination port
- * for a specific tunnel type.
+ * Description: This function is called by a driver to allocate l4 destination
+ * port for a specific tunnel type. The destination port value is provided in
+ * the input. If the HWRM supports only one global destination port for a tunnel
+ * type, then the HWRM shall keep track of its usage as described below. # The
+ * first caller that allocates a destination port shall always succeed and the
+ * HWRM shall save the destination port configuration for that tunnel type and
+ * increment the usage count to 1. # Subsequent callers allocating the same
+ * destination port for that tunnel type shall succeed and the HWRM shall
+ * increment the usage count for that port for each subsequent caller that
+ * succeeds. # Any subsequent caller trying to allocate a different destination
+ * port for that tunnel type shall fail until the usage count for the original
+ * destination port goes to zero. # A caller that frees a port will cause the
+ * usage count for that port to decrement.
*/
/* Input (24 bytes) */
-struct hwrm_tunnel_dst_port_free_input {
+struct hwrm_tunnel_dst_port_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7317,21 +7208,23 @@ struct hwrm_tunnel_dst_port_free_input {
uint8_t tunnel_type;
/* Tunnel Type. */
/* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
/* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
uint8_t unused_0;
- uint16_t tunnel_dst_port_id;
+ uint16_t tunnel_dst_port_val;
/*
- * Identifier of a tunnel L4 destination port value. Only
- * applies to tunnel types that has l4 destination port
- * parameters.
+ * This field represents the value of L4 destination port used
+ * for the given tunnel type. This field is valid for specific
+ * tunnel types that use layer 4 (e.g. UDP) transports for
+ * tunneling. This field is in network byte order. A value of 0
+ * shall fail the command.
*/
uint32_t unused_1;
} __attribute__((packed));
/* Output (16 bytes) */
-struct hwrm_tunnel_dst_port_free_output {
+struct hwrm_tunnel_dst_port_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7347,10 +7240,17 @@ struct hwrm_tunnel_dst_port_free_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t unused_0;
+ uint16_t tunnel_dst_port_id;
+ /*
+ * Identifier of a tunnel L4 destination port value. Only
+ * applies to tunnel types that has l4 destination port
+ * parameters.
+ */
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
+ uint8_t unused_4;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
@@ -7362,13 +7262,13 @@ struct hwrm_tunnel_dst_port_free_output {
*/
} __attribute__((packed));
-/* hwrm_stat_ctx_alloc */
+/* hwrm_tunnel_dst_port_free */
/*
- * Description: This command allocates and does basic preparation for a stat
- * context.
+ * Description: This function is called by a driver to free l4 destination port
+ * for a specific tunnel type.
*/
-/* Input (32 bytes) */
-struct hwrm_stat_ctx_alloc_input {
+/* Input (24 bytes) */
+struct hwrm_tunnel_dst_port_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7395,21 +7295,24 @@ struct hwrm_stat_ctx_alloc_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint64_t stats_dma_addr;
- /* This is the address for statistic block. */
- uint32_t update_period_ms;
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ uint8_t unused_0;
+ uint16_t tunnel_dst_port_id;
/*
- * The statistic block update period in ms. e.g. 250ms, 500ms,
- * 750ms, 1000ms. If update_period_ms is 0, then the stats
- * update shall be never done and the DMA address shall not be
- * used. In this case, the stat block can only be read by
- * hwrm_stat_ctx_query command.
+ * Identifier of a tunnel L4 destination port value. Only
+ * applies to tunnel types that has l4 destination port
+ * parameters.
*/
- uint32_t unused_0;
+ uint32_t unused_1;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_alloc_output {
+/* Output (16 bytes) */
+struct hwrm_tunnel_dst_port_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7425,11 +7328,10 @@ struct hwrm_stat_ctx_alloc_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t stat_ctx_id;
- /* This is the statistics context ID value. */
- uint8_t unused_0;
+ uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
@@ -7441,10 +7343,13 @@ struct hwrm_stat_ctx_alloc_output {
*/
} __attribute__((packed));
-/* hwrm_stat_ctx_free */
-/* Description: This command is used to free a stat context. */
-/* Input (24 bytes) */
-struct hwrm_stat_ctx_free_input {
+/* hwrm_stat_ctx_alloc */
+/*
+ * Description: This command allocates and does basic preparation for a stat
+ * context.
+ */
+/* Input (32 bytes) */
+struct hwrm_stat_ctx_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7471,13 +7376,35 @@ struct hwrm_stat_ctx_free_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t stat_ctx_id;
- /* ID of the statistics context that is being queried. */
- uint32_t unused_0;
+ uint64_t stats_dma_addr;
+ /* This is the address for statistic block. */
+ uint32_t update_period_ms;
+ /*
+ * The statistic block update period in ms. e.g. 250ms, 500ms,
+ * 750ms, 1000ms. If update_period_ms is 0, then the stats
+ * update shall be never done and the DMA address shall not be
+ * used. In this case, the stat block can only be read by
+ * hwrm_stat_ctx_query command.
+ */
+ uint8_t stat_ctx_flags;
+ /*
+ * This field is used to specify statistics context specific
+ * configuration flags.
+ */
+ /*
+ * When this bit is set to '1', the statistics context shall be
+ * allocated for RoCE traffic only. In this case, traffic other
+ * than offloaded RoCE traffic shall not be included in this
+ * statistic context. When this bit is set to '0', the
+ * statistics context shall be used for the network traffic
+ * other than offloaded RoCE traffic.
+ */
+ #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1)
+ uint8_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_free_output {
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7509,10 +7436,10 @@ struct hwrm_stat_ctx_free_output {
*/
} __attribute__((packed));
-/* hwrm_port_qstats */
-/* Description: This function returns per port Ethernet statistics. */
-/* Input (40 bytes) */
-struct hwrm_port_qstats_input {
+/* hwrm_stat_ctx_free */
+/* Description: This command is used to free a stat context. */
+/* Input (24 bytes) */
+struct hwrm_stat_ctx_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7539,20 +7466,13 @@ struct hwrm_port_qstats_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint16_t port_id;
- /* Port ID of port that is being queried. */
- uint8_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2[3];
- uint8_t unused_3;
- uint64_t tx_stat_host_addr;
- /* This is the host address where Tx port statistics will be stored */
- uint64_t rx_stat_host_addr;
- /* This is the host address where Rx port statistics will be stored */
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_port_qstats_output {
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7568,10 +7488,8 @@ struct hwrm_port_qstats_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint16_t tx_stat_size;
- /* The size of TX port statistics block in bytes. */
- uint16_t rx_stat_size;
- /* The size of RX port statistics block in bytes. */
+ uint32_t stat_ctx_id;
+ /* This is the statistics context ID value. */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
@@ -7586,15 +7504,10 @@ struct hwrm_port_qstats_output {
*/
} __attribute__((packed));
-/* hwrm_port_clr_stats */
-/*
- * Description: This function clears per port statistics. The HWRM shall not
- * allow a VF driver to clear port statistics. The HWRM shall not allow a PF
- * driver to clear port statistics in a partitioning mode. The HWRM may allow a
- * PF driver to clear port statistics in the non-partitioning mode.
- */
-/* Input (24 bytes) */
-struct hwrm_port_clr_stats_input {
+/* hwrm_stat_ctx_clr_stats */
+/* Description: This command clears statistics of a context. */
+/* Input (24 bytes) */
+struct hwrm_stat_ctx_clr_stats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7621,13 +7534,13 @@ struct hwrm_port_clr_stats_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint16_t port_id;
- /* Port ID of port that is being queried. */
- uint16_t unused_0[3];
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_port_clr_stats_output {
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_clr_stats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7657,10 +7570,19 @@ struct hwrm_port_clr_stats_output {
* this field is written last.
*/
} __attribute__((packed));
-/* hwrm_stat_ctx_clr_stats */
-/* Description: This command clears statistics of a context. */
-/* Input (24 bytes) */
-struct hwrm_stat_ctx_clr_stats_input {
+
+/* hwrm_exec_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated request to the
+ * HWRM. This command instructs the HWRM to execute the request and forward the
+ * response of the encapsulated request to the location specified in the
+ * original request that is encapsulated. The target id of this command shall be
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * acknowledge the receipt of the encapsulated request and forwarding of the
+ * response.
+ */
+/* Input (128 bytes) */
+struct hwrm_exec_fwd_resp_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7687,13 +7609,24 @@ struct hwrm_stat_ctx_clr_stats_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t stat_ctx_id;
- /* ID of the statistics context that is being queried. */
- uint32_t unused_0;
+ uint32_t encap_request[26];
+ /*
+ * This is an encapsulated request. This request should be
+ * executed by the HWRM and the response should be provided in
+ * the response buffer inside the encapsulated request.
+ */
+ uint16_t encap_resp_target_id;
+ /*
+ * This value indicates the target id of the response to the
+ * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
+ * HWRM
+ */
+ uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_clr_stats_output {
+/* Output (16 bytes) */
+struct hwrm_exec_fwd_resp_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7724,18 +7657,18 @@ struct hwrm_stat_ctx_clr_stats_output {
*/
} __attribute__((packed));
-/* hwrm_exec_fwd_resp */
+/* hwrm_reject_fwd_resp */
/*
* Description: This command is used to send an encapsulated request to the
- * HWRM. This command instructs the HWRM to execute the request and forward the
- * response of the encapsulated request to the location specified in the
+ * HWRM. This command instructs the HWRM to reject the request and forward the
+ * error response of the encapsulated request to the location specified in the
* original request that is encapsulated. The target id of this command shall be
- * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
* acknowledge the receipt of the encapsulated request and forwarding of the
* response.
*/
-/* Input (128 bytes) */
-struct hwrm_exec_fwd_resp_input {
+/* Input (128 bytes) */
+struct hwrm_reject_fwd_resp_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7765,8 +7698,9 @@ struct hwrm_exec_fwd_resp_input {
uint32_t encap_request[26];
/*
* This is an encapsulated request. This request should be
- * executed by the HWRM and the response should be provided in
- * the response buffer inside the encapsulated request.
+ * rejected by the HWRM and the error response should be
+ * provided in the response buffer inside the encapsulated
+ * request.
*/
uint16_t encap_resp_target_id;
/*
@@ -7778,8 +7712,8 @@ struct hwrm_exec_fwd_resp_input {
uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_exec_fwd_resp_output {
+/* Output (16 bytes) */
+struct hwrm_reject_fwd_resp_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7810,19 +7744,16 @@ struct hwrm_exec_fwd_resp_output {
*/
} __attribute__((packed));
-
-/* hwrm_reject_fwd_resp */
+/* Hardware Resource Manager Specification */
+/* Description: This structure is used to specify port description. */
/*
- * Description: This command is used to send an encapsulated request to the
- * HWRM. This command instructs the HWRM to reject the request and forward the
- * error response of the encapsulated request to the location specified in the
- * original request that is encapsulated. The target id of this command shall be
- * set to 0xFFFF (HWRM). The response location in this command shall be used to
- * acknowledge the receipt of the encapsulated request and forwarding of the
- * response.
+ * Note: The Hardware Resource Manager (HWRM) manages various hardware resources
+ * inside the chip. The HWRM is implemented in firmware, and runs on embedded
+ * processors inside the chip. This firmware service is vital part of the chip.
+ * The chip can not be used by a driver or HWRM client without the HWRM.
*/
-/* Input (128 bytes) */
-struct hwrm_reject_fwd_resp_input {
+/* Input (16 bytes) */
+struct input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
@@ -7849,25 +7780,10 @@ struct hwrm_reject_fwd_resp_input {
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t encap_request[26];
- /*
- * This is an encapsulated request. This request should be
- * rejected by the HWRM and the error response should be
- * provided in the response buffer inside the encapsulated
- * request.
- */
- uint16_t encap_resp_target_id;
- /*
- * This value indicates the target id of the response to the
- * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
- * HWRM
- */
- uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_reject_fwd_resp_output {
+/* Output (8 bytes) */
+struct output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
@@ -7883,11 +7799,94 @@ struct hwrm_reject_fwd_resp_output {
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t valid;
+} __attribute__((packed));
+
+#define HWRM_GET_HWRM_ERROR_CODE(x) \
+ ((x) == 0xf ? "HWRM_ERROR": \
+ ((x) == 0xffff ? "CMD_NOT_SUPPORTED": \
+ ((x) == 0xfffe ? "UNKNOWN_ERR": \
+ ((x) == 0x4 ? "RESOURCE_ALLOC_ERROR": \
+ ((x) == 0x5 ? "INVALID_FLAGS": \
+ ((x) == 0x6 ? "INVALID_ENABLES": \
+ ((x) == 0x0 ? "SUCCESS": \
+ ((x) == 0x1 ? "FAIL": \
+ ((x) == 0x2 ? "INVALID_PARAMS": \
+ ((x) == 0x3 ? "RESOURCE_ACCESS_DENIED": \
+ "Unknown error_code"))))))))))
+
+/* Return Codes (8 bytes) */
+struct ret_codes {
+ uint16_t error_code;
+ /* These are numbers assigned to return/error codes. */
+ /* Request was successfully executed by the HWRM. */
+ #define HWRM_ERR_CODE_SUCCESS (UINT32_C(0x0))
+ /* THe HWRM failed to execute the request. */
+ #define HWRM_ERR_CODE_FAIL (UINT32_C(0x1))
+ /*
+ * The request contains invalid argument(s) or
+ * input parameters.
+ */
+ #define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
+ /*
+ * The requester is not allowed to access the
+ * requested resource. This error code shall be
+ * provided in a response to a request to query
+ * or modify an existing resource that is not
+ * accessible by the requester.
+ */
+ #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
+ /*
+ * The HWRM is unable to allocate the requested
+ * resource. This code only applies to requests
+ * for HWRM resource allocations.
+ */
+ #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR (UINT32_C(0x4))
+ /* Invalid combination of flags is specified in the request. */
+ #define HWRM_ERR_CODE_INVALID_FLAGS (UINT32_C(0x5))
+ /*
+ * Invalid combination of enables fields is
+ * specified in the request.
+ */
+ #define HWRM_ERR_CODE_INVALID_ENABLES (UINT32_C(0x6))
+ /*
+ * Generic HWRM execution error that represents
+ * an internal error.
+ */
+ #define HWRM_ERR_CODE_HWRM_ERROR (UINT32_C(0xf))
+ /* Unknown error */
+ #define HWRM_ERR_CODE_UNKNOWN_ERR (UINT32_C(0xfffe))
+ /* Unsupported or invalid command */
+ #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED (UINT32_C(0xffff))
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_err_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t opaque_0;
+ /* debug info for this error response. */
+ uint16_t opaque_1;
+ /* debug info for this error response. */
+ uint8_t cmd_err;
+ /*
+ * In the case of an error response, command specific error code
+ * is returned in this field.
+ */
+ uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
@@ -7898,4 +7897,378 @@ struct hwrm_reject_fwd_resp_output {
*/
} __attribute__((packed));
-#endif
+/* Port Tx Statistics Formats (408 bytes) */
+struct tx_port_stats {
+ uint64_t tx_64b_frames;
+ /* Total Number of 64 Bytes frames transmitted */
+ uint64_t tx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames transmitted */
+ uint64_t tx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames transmitted */
+ uint64_t tx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames transmitted */
+ uint64_t tx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames transmitted */
+ uint64_t tx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames transmitted */
+ uint64_t tx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame
+ * transmitted which is 1519 to 1522 bytes in length inclusive
+ * (excluding framing bits but including FCS bytes).
+ */
+ uint64_t tx_1519b_2047_frames;
+ /* Total Number of 1519-2047 Bytes frames transmitted */
+ uint64_t tx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames transmitted */
+ uint64_t tx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames transmitted */
+ uint64_t tx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames transmitted */
+ uint64_t tx_good_frames;
+ /* Total Number of good frames transmitted */
+ uint64_t tx_total_frames;
+ /* Total Number of frames transmitted */
+ uint64_t tx_ucast_frames;
+ /* Total number of unicast frames transmitted */
+ uint64_t tx_mcast_frames;
+ /* Total number of multicast frames transmitted */
+ uint64_t tx_bcast_frames;
+ /* Total number of broadcast frames transmitted */
+ uint64_t tx_pause_frames;
+ /* Total number of PAUSE control frames transmitted */
+ uint64_t tx_pfc_frames;
+ /* Total number of PFC/per-priority PAUSE control frames transmitted */
+ uint64_t tx_jabber_frames;
+ /* Total number of jabber frames transmitted */
+ uint64_t tx_fcs_err_frames;
+ /* Total number of frames transmitted with FCS error */
+ uint64_t tx_control_frames;
+ /* Total number of control frames transmitted */
+ uint64_t tx_oversz_frames;
+ /* Total number of over-sized frames transmitted */
+ uint64_t tx_single_dfrl_frames;
+ /* Total number of frames with single deferral */
+ uint64_t tx_multi_dfrl_frames;
+ /* Total number of frames with multiple deferrals */
+ uint64_t tx_single_coll_frames;
+ /* Total number of frames with single collision */
+ uint64_t tx_multi_coll_frames;
+ /* Total number of frames with multiple collisions */
+ uint64_t tx_late_coll_frames;
+ /* Total number of frames with late collisions */
+ uint64_t tx_excessive_coll_frames;
+ /* Total number of frames with excessive collisions */
+ uint64_t tx_frag_frames;
+ /* Total number of fragmented frames transmitted */
+ uint64_t tx_err;
+ /* Total number of transmit errors */
+ uint64_t tx_tagged_frames;
+ /* Total number of single VLAN tagged frames transmitted */
+ uint64_t tx_dbl_tagged_frames;
+ /* Total number of double VLAN tagged frames transmitted */
+ uint64_t tx_runt_frames;
+ /* Total number of runt frames transmitted */
+ uint64_t tx_fifo_underruns;
+ /* Total number of TX FIFO under runs */
+ uint64_t tx_pfc_ena_frames_pri0;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 0
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri1;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 1
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri2;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 2
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri3;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 3
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri4;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 4
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri5;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 5
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri6;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 6
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri7;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 7
+ * transmitted
+ */
+ uint64_t tx_eee_lpi_events;
+ /* Total number of EEE LPI Events on TX */
+ uint64_t tx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on TX */
+ uint64_t tx_llfc_logical_msgs;
+ /*
+ * Total number of Link Level Flow Control (LLFC) messages
+ * transmitted
+ */
+ uint64_t tx_hcfc_msgs;
+ /* Total number of HCFC messages transmitted */
+ uint64_t tx_total_collisions;
+ /* Total number of TX collisions */
+ uint64_t tx_bytes;
+ /* Total number of transmitted bytes */
+ uint64_t tx_xthol_frames;
+ /* Total number of end-to-end HOL frames */
+ uint64_t tx_stat_discard;
+ /* Total Tx Drops per Port reported by STATS block */
+ uint64_t tx_stat_error;
+ /* Total Tx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
+/* Port Rx Statistics Formats (528 bytes) */
+struct rx_port_stats {
+ uint64_t rx_64b_frames;
+ /* Total Number of 64 Bytes frames received */
+ uint64_t rx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames received */
+ uint64_t rx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames received */
+ uint64_t rx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames received */
+ uint64_t rx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames received */
+ uint64_t rx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames received */
+ uint64_t rx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame
+ * received which is 1519 to 1522 bytes in length inclusive
+ * (excluding framing bits but including FCS bytes).
+ */
+ uint64_t rx_1519b_2047b_frames;
+ /* Total Number of 1519-2047 Bytes frames received */
+ uint64_t rx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames received */
+ uint64_t rx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames received */
+ uint64_t rx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames received */
+ uint64_t rx_total_frames;
+ /* Total number of frames received */
+ uint64_t rx_ucast_frames;
+ /* Total number of unicast frames received */
+ uint64_t rx_mcast_frames;
+ /* Total number of multicast frames received */
+ uint64_t rx_bcast_frames;
+ /* Total number of broadcast frames received */
+ uint64_t rx_fcs_err_frames;
+ /* Total number of received frames with FCS error */
+ uint64_t rx_ctrl_frames;
+ /* Total number of control frames received */
+ uint64_t rx_pause_frames;
+ /* Total number of PAUSE frames received */
+ uint64_t rx_pfc_frames;
+ /* Total number of PFC frames received */
+ uint64_t rx_unsupported_opcode_frames;
+ /* Total number of frames received with an unsupported opcode */
+ uint64_t rx_unsupported_da_pausepfc_frames;
+ /*
+ * Total number of frames received with an unsupported DA for
+ * pause and PFC
+ */
+ uint64_t rx_wrong_sa_frames;
+ /* Total number of frames received with an unsupported SA */
+ uint64_t rx_align_err_frames;
+ /* Total number of received packets with alignment error */
+ uint64_t rx_oor_len_frames;
+ /* Total number of received frames with out-of-range length */
+ uint64_t rx_code_err_frames;
+ /* Total number of received frames with error termination */
+ uint64_t rx_false_carrier_frames;
+ /*
+ * Total number of received frames with a false carrier is
+ * detected during idle, as defined by RX_ER samples active and
+ * RXD is 0xE. The event is reported along with the statistics
+ * generated on the next received frame. Only one false carrier
+ * condition can be detected and logged between frames. Carrier
+ * event, valid for 10M/100M speed modes only.
+ */
+ uint64_t rx_ovrsz_frames;
+ /* Total number of over-sized frames received */
+ uint64_t rx_jbr_frames;
+ /* Total number of jabber packets received */
+ uint64_t rx_mtu_err_frames;
+ /* Total number of received frames with MTU error */
+ uint64_t rx_match_crc_frames;
+ /* Total number of received frames with CRC match */
+ uint64_t rx_promiscuous_frames;
+ /* Total number of frames received promiscuously */
+ uint64_t rx_tagged_frames;
+ /* Total number of received frames with one or two VLAN tags */
+ uint64_t rx_double_tagged_frames;
+ /* Total number of received frames with two VLAN tags */
+ uint64_t rx_trunc_frames;
+ /* Total number of truncated frames received */
+ uint64_t rx_good_frames;
+ /* Total number of good frames (without errors) received */
+ uint64_t rx_pfc_xon2xoff_frames_pri0;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 0
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri1;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 1
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri2;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 2
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri3;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 3
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri4;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 4
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri5;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 5
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri6;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 6
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri7;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 7
+ */
+ uint64_t rx_pfc_ena_frames_pri0;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 0
+ */
+ uint64_t rx_pfc_ena_frames_pri1;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 1
+ */
+ uint64_t rx_pfc_ena_frames_pri2;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 2
+ */
+ uint64_t rx_pfc_ena_frames_pri3;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 3
+ */
+ uint64_t rx_pfc_ena_frames_pri4;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 4
+ */
+ uint64_t rx_pfc_ena_frames_pri5;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 5
+ */
+ uint64_t rx_pfc_ena_frames_pri6;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 6
+ */
+ uint64_t rx_pfc_ena_frames_pri7;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 7
+ */
+ uint64_t rx_sch_crc_err_frames;
+ /* Total Number of frames received with SCH CRC error */
+ uint64_t rx_undrsz_frames;
+ /* Total Number of under-sized frames received */
+ uint64_t rx_frag_frames;
+ /* Total Number of fragmented frames received */
+ uint64_t rx_eee_lpi_events;
+ /* Total number of RX EEE LPI Events */
+ uint64_t rx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on RX */
+ uint64_t rx_llfc_physical_msgs;
+ /*
+ * Total number of physical type Link Level Flow Control (LLFC)
+ * messages received
+ */
+ uint64_t rx_llfc_logical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC)
+ * messages received
+ */
+ uint64_t rx_llfc_msgs_with_crc_err;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC)
+ * messages received with CRC error
+ */
+ uint64_t rx_hcfc_msgs;
+ /* Total number of HCFC messages received */
+ uint64_t rx_hcfc_msgs_with_crc_err;
+ /* Total number of HCFC messages received with CRC error */
+ uint64_t rx_bytes;
+ /* Total number of received bytes */
+ uint64_t rx_runt_bytes;
+ /* Total number of bytes received in runt frames */
+ uint64_t rx_runt_frames;
+ /* Total number of runt frames received */
+ uint64_t rx_stat_discard;
+ /* Total Rx Discards per Port reported by STATS block */
+ uint64_t rx_stat_err;
+ /* Total Rx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
+/* Periodic Statistics Context DMA to host (160 bytes) */
+/*
+ * per-context HW statistics -- chip view
+ */
+
+struct ctx_hw_stats64 {
+ uint64_t rx_ucast_pkts;
+ uint64_t rx_mcast_pkts;
+ uint64_t rx_bcast_pkts;
+ uint64_t rx_drop_pkts;
+ uint64_t rx_discard_pkts;
+ uint64_t rx_ucast_bytes;
+ uint64_t rx_mcast_bytes;
+ uint64_t rx_bcast_bytes;
+
+ uint64_t tx_ucast_pkts;
+ uint64_t tx_mcast_pkts;
+ uint64_t tx_bcast_pkts;
+ uint64_t tx_drop_pkts;
+ uint64_t tx_discard_pkts;
+ uint64_t tx_ucast_bytes;
+ uint64_t tx_mcast_bytes;
+ uint64_t tx_bcast_bytes;
+
+ uint64_t tpa_pkts;
+ uint64_t tpa_bytes;
+ uint64_t tpa_events;
+ uint64_t tpa_aborts;
+} __attribute__((packed));
+
+#endif /* _HSI_STRUCT_DEF_DPDK_ */
--
2.10.1 (Apple Git-78)
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
` (27 preceding siblings ...)
2017-03-28 3:49 ` [dpdk-dev] [PATCH 28/28] bnxt: update to HWRM version 1.7.4 Ajit Khaparde
@ 2017-03-29 12:14 ` Ferruh Yigit
2017-03-29 15:45 ` Ferruh Yigit
2017-03-29 19:31 ` Ajit Khaparde
28 siblings, 2 replies; 34+ messages in thread
From: Ferruh Yigit @ 2017-03-29 12:14 UTC (permalink / raw)
To: Ajit Khaparde, dev
On 3/28/2017 4:48 AM, Ajit Khaparde wrote:
> Apart from adding support for VF-PF/PF-VF communication, new dev_ops,
> few bug fixes and improve debug capabilities, this patchset updates
> the driver to the newer HWRM version 1.7.4
>
> New dev_ops supported:
> set_mc_addr_list, xstats_get/reset, mac_addr_set, vlan_filter_set,
> vlan_strip_queue_set, vlan_offload_set, udp_tunnel_port_add/del
>
> bug fixes:
> use only long BDs in Tx path to avoid a potential bug in hardware,
> fix interrupt handler, set the VMDQ pool size correctly
>
> Derived from an autogenerated file, the last patch updates the
> HWRM version to 1.7.4
Hi Ajit,
It looks like bnxt also started supporting PMD specific APIs in this
patchset. Perhaps we should investigate them if are there common ones
with other PMDs and if so move them to ethdev layer instead of PMD
specific API.
BTW, There are new PMD features in this patchset, and patchset sent two
days before integration deadline.
The process is, new feature patches sent before proposal deadline, which
was March 3 for this release, and let patches reviewed and new versions
sent until integration deadline. If patches acked before integration
deadline, they are integrated.
So this patchset is too late for this release, will be considered for
next release.
If you have urgent fixes, please separate them into another patchset,
and we can work on them to get into this release, but still it is so
close to integration deadline, no promises.
Thanks,
ferruh
>
> Ajit Khaparde:
> [01/28] bnxt: add hwrm_func_cfg_input/output structures
> [04/28] bnxt: add new HWRM commands
> [06/28] bnxt: add new HWRM commands to query VNIC info
> [09/28] bnxt: add code to support VF QOS configuration
> [14/28] bnxt: Add support for udp_tunnel_port_add/del dev_ops
> [15/28] bnxt: Update tx offload capabilities
> [16/28] bnxt: add support for set VF MAC anti spoof
> [20/28] bnxt: Add support to set VF rxmode
> [23/28] bnxt: Add support for VLAN filter and strip dev_ops
> [24/28] bnxt: Add support for mac_addr_set dev_op
> [25/28] bnxt: add support for xstats
> [26/28] bnxt: use only long BDs in Tx path
> [27/28] bnxt: add support for set_mc_addr_list dev_op
> [28/28] bnxt: update to HWRM version 1.7.4
>
> Stephen Hurd:
> [02/28] bnxt: add code to support PF, VF configuration
> [03/28] bnxt: add additonal HWRM debug info to error messages
> [05/28] bnxt: add support for PF/VF communications
> [10/28] bnxt: support for VF VLAN filtering
> [11/28] bnxt: set the VMDQ pool size correctly
> [12/28] bnxt: improve some of the log messages
> [13/28] bnxt: fix interrupt handler
> [17/28] bnxt: implement VF VLAN stripq functionality
> [18/28] bnxt: support lack of huge pages
> [19/28] bnxt: add code to configure a default VF VLAN
> [21/28] bnxt: Add VF stats get/reset functions
> [22/28] bnxt: Add newlines to all RTE_LOG() format strings
>
> Steeven Li:
> [07/28] bnxt: add functions for tx_loopback and queues_drop_en
> [08/28] bnxt: support setting VF mac address
>
> Please apply.
>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more
2017-03-29 12:14 ` [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ferruh Yigit
@ 2017-03-29 15:45 ` Ferruh Yigit
2017-03-29 19:31 ` Ajit Khaparde
1 sibling, 0 replies; 34+ messages in thread
From: Ferruh Yigit @ 2017-03-29 15:45 UTC (permalink / raw)
To: Ajit Khaparde, dev
On 3/29/2017 1:14 PM, Ferruh Yigit wrote:
> On 3/28/2017 4:48 AM, Ajit Khaparde wrote:
>> Apart from adding support for VF-PF/PF-VF communication, new dev_ops,
>> few bug fixes and improve debug capabilities, this patchset updates
>> the driver to the newer HWRM version 1.7.4
>>
>> New dev_ops supported:
>> set_mc_addr_list, xstats_get/reset, mac_addr_set, vlan_filter_set,
>> vlan_strip_queue_set, vlan_offload_set, udp_tunnel_port_add/del
>>
>> bug fixes:
>> use only long BDs in Tx path to avoid a potential bug in hardware,
>> fix interrupt handler, set the VMDQ pool size correctly
>>
>> Derived from an autogenerated file, the last patch updates the
>> HWRM version to 1.7.4
>
> Hi Ajit,
>
> It looks like bnxt also started supporting PMD specific APIs in this
> patchset. Perhaps we should investigate them if are there common ones
> with other PMDs and if so move them to ethdev layer instead of PMD
> specific API.
>
>
> BTW, There are new PMD features in this patchset, and patchset sent two
> days before integration deadline.
>
> The process is, new feature patches sent before proposal deadline, which
> was March 3 for this release, and let patches reviewed and new versions
> sent until integration deadline. If patches acked before integration
> deadline, they are integrated.
>
> So this patchset is too late for this release, will be considered for
> next release.
For further usage, patchset gives build error for 32bit and shared
library builds.
>
> If you have urgent fixes, please separate them into another patchset,
> and we can work on them to get into this release, but still it is so
> close to integration deadline, no promises.
>
> Thanks,
> ferruh
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more
2017-03-29 12:14 ` [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ferruh Yigit
2017-03-29 15:45 ` Ferruh Yigit
@ 2017-03-29 19:31 ` Ajit Khaparde
1 sibling, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-03-29 19:31 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
>
>
> The process is, new feature patches sent before proposal deadline, which
> was March 3 for this release, and let patches reviewed and new versions
> sent until integration deadline. If patches acked before integration
> deadline, they are integrated.
>
> So this patchset is too late for this release, will be considered for
> next release.
>
> If you have urgent fixes, please separate them into another patchset,
> and we can work on them to get into this release, but still it is so
> close to integration deadline, no promises.
>
Well, I posted the patches as they got ready. So I understand.
Thanks
Ajit
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [dpdk-dev] [PATCH 05/28] bnxt: add support for PF/VF communications
2017-03-28 3:48 ` [dpdk-dev] [PATCH 05/28] bnxt: add support for PF/VF communications Ajit Khaparde
@ 2017-05-11 17:00 ` Ferruh Yigit
2017-05-11 17:07 ` Ajit Khaparde
0 siblings, 1 reply; 34+ messages in thread
From: Ferruh Yigit @ 2017-05-11 17:00 UTC (permalink / raw)
To: Ajit Khaparde, Stephen Hurd; +Cc: dev
On 3/28/2017 4:48 AM, Ajit Khaparde wrote:
> Set up interrupts and default completion ring during device init to
> allow VF communications.
>
> Request most VF HWRM commands be forwarded to the PF driver. In the
> future, this should be configurable.
>
> Fix reporting of active VFs.
>
> Add a log message when a completion is ignored on the default completion
> ring since this will indicate support that needs to be added.
>
> Do not initialize the default completion ring in bnxt_alloc_hwrm_rings(),
> but move it out to bnxt_dev_init().
>
> Create a structure bnxt_child_vf_info for PF to cache VF specific info.
>
> Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Hi Ajit, Stephen,
This patch doesn't cleanly apply on top of latest next-net, can you
please rebase the patchset?
Also as reminder, there was previously reported 32bit and shared
library builds.
And there are some checkpatch warnings in patch 25 and 28.
Thanks,
ferruh
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [dpdk-dev] [PATCH 05/28] bnxt: add support for PF/VF communications
2017-05-11 17:00 ` Ferruh Yigit
@ 2017-05-11 17:07 ` Ajit Khaparde
0 siblings, 0 replies; 34+ messages in thread
From: Ajit Khaparde @ 2017-05-11 17:07 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: Stephen Hurd, dev
On Thu, May 11, 2017 at 12:00 PM, Ferruh Yigit <ferruh.yigit@intel.com>
wrote:
> On 3/28/2017 4:48 AM, Ajit Khaparde wrote:
> > Set up interrupts and default completion ring during device init to
> > allow VF communications.
> >
> > Request most VF HWRM commands be forwarded to the PF driver. In the
> > future, this should be configurable.
> >
> > Fix reporting of active VFs.
> >
> > Add a log message when a completion is ignored on the default completion
> > ring since this will indicate support that needs to be added.
> >
> > Do not initialize the default completion ring in bnxt_alloc_hwrm_rings(),
> > but move it out to bnxt_dev_init().
> >
> > Create a structure bnxt_child_vf_info for PF to cache VF specific info.
> >
> > Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
> > Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
>
> Hi Ajit, Stephen,
>
> This patch doesn't cleanly apply on top of latest next-net, can you
> please rebase the patchset?
>
Yes, Ferruh. I
am working on that.
>
> Also as reminder, there was previously reported 32bit and shared
> library builds.
>
> And there are some checkpatch
>
> warnings in patch 25 and 28.
>
And these as well.
>
> Thanks,
> ferruh
>
^ permalink raw reply [flat|nested] 34+ messages in thread
end of thread, other threads:[~2017-05-11 17:08 UTC | newest]
Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-28 3:48 [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 01/28] bnxt: add hwrm_func_cfg_input/output structures Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 02/28] bnxt: add code to support PF, VF configuration Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 03/28] bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 04/28] bnxt: add new HWRM commands Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 05/28] bnxt: add support for PF/VF communications Ajit Khaparde
2017-05-11 17:00 ` Ferruh Yigit
2017-05-11 17:07 ` Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 06/28] bnxt: add new HWRM commands to query VNIC info Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 07/28] bnxt: add functions for tx_loopback and queues_drop_en Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 08/28] bnxt: support setting VF mac address Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 09/28] bnxt: add code to support VF QOS configuration Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 10/28] bnxt: support for VF VLAN filtering Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 11/28] bnxt: set the VMDQ pool size correctly Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 12/28] bnxt: improve some of the log messages Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 13/28] bnxt: fix interrupt handler Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 14/28] bnxt: Add support for udp_tunnel_port_add/del dev_ops Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 15/28] bnxt: Update tx offload capabilities Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 16/28] bnxt: add support for set VF MAC anti spoof Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 17/28] bnxt: implement VF VLAN stripq functionality Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 18/28] bnxt: support lack of huge pages Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 19/28] bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 20/28] bnxt: Add support to set VF rxmode Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 21/28] bnxt: Add VF stats get/reset functions Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 22/28] bnxt: Add newlines to all RTE_LOG() format strings Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 23/28] bnxt: Add support for VLAN filter and strip dev_ops Ajit Khaparde
2017-03-28 3:48 ` [dpdk-dev] [PATCH 24/28] bnxt: Add support for mac_addr_set dev_op Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 25/28] bnxt: add support for xstats Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 26/28] bnxt: use only long BDs in Tx path Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 27/28] bnxt: add support for set_mc_addr_list dev_op Ajit Khaparde
2017-03-28 3:49 ` [dpdk-dev] [PATCH 28/28] bnxt: update to HWRM version 1.7.4 Ajit Khaparde
2017-03-29 12:14 ` [dpdk-dev] [PATCH 00/28] bnxt: new features, bug fixes and more Ferruh Yigit
2017-03-29 15:45 ` Ferruh Yigit
2017-03-29 19:31 ` Ajit Khaparde
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).