From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, Stephen Hurd <stephen.hurd@broadcom.com>
Subject: [dpdk-dev] [PATCH 08/23] bnxt: add support to get and clear VF specific stats
Date: Wed, 17 May 2017 20:57:58 -0500 [thread overview]
Message-ID: <20170518015813.7862-9-ajit.khaparde@broadcom.com> (raw)
In-Reply-To: <20170518015813.7862-1-ajit.khaparde@broadcom.com>
This patch adds code to get and clear VF stats.
It also adds the necessary HWRM structures to send the command
to the firmware.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_hwrm.c | 75 ++++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 5 +
drivers/net/bnxt/hsi_struct_def_dpdk.h | 217 +++++++++++++++++++++++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.c | 87 +++++++++++++
drivers/net/bnxt/rte_pmd_bnxt.h | 64 ++++++++++
5 files changed, 448 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 05f7034..589d327 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -1164,6 +1164,81 @@ int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf, const uint8_t *mac_addr)
return rc;
}
+int bnxt_hwrm_func_qstats_tx_drop(struct bnxt *bp, uint16_t fid,
+ uint64_t *dropped)
+{
+ int rc = 0;
+ struct hwrm_func_qstats_input req = {.req_type = 0};
+ struct hwrm_func_qstats_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_QSTATS, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(fid);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ if (dropped)
+ *dropped = rte_le_to_cpu_64(resp->tx_drop_pkts);
+
+ return rc;
+}
+
+int bnxt_hwrm_func_qstats(struct bnxt *bp, uint16_t fid,
+ struct rte_eth_stats *stats)
+{
+ int rc = 0;
+ struct hwrm_func_qstats_input req = {.req_type = 0};
+ struct hwrm_func_qstats_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_QSTATS, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(fid);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ stats->ipackets = rte_le_to_cpu_64(resp->rx_ucast_pkts);
+ stats->ipackets += rte_le_to_cpu_64(resp->rx_mcast_pkts);
+ stats->ipackets += rte_le_to_cpu_64(resp->rx_bcast_pkts);
+ stats->ibytes = rte_le_to_cpu_64(resp->rx_ucast_bytes);
+ stats->ibytes += rte_le_to_cpu_64(resp->rx_mcast_bytes);
+ stats->ibytes += rte_le_to_cpu_64(resp->rx_bcast_bytes);
+
+ stats->opackets = rte_le_to_cpu_64(resp->tx_ucast_pkts);
+ stats->opackets += rte_le_to_cpu_64(resp->tx_mcast_pkts);
+ stats->opackets += rte_le_to_cpu_64(resp->tx_bcast_pkts);
+ stats->obytes = rte_le_to_cpu_64(resp->tx_ucast_bytes);
+ stats->obytes += rte_le_to_cpu_64(resp->tx_mcast_bytes);
+ stats->obytes += rte_le_to_cpu_64(resp->tx_bcast_bytes);
+
+ stats->ierrors = rte_le_to_cpu_64(resp->rx_err_pkts);
+ stats->oerrors = rte_le_to_cpu_64(resp->tx_err_pkts);
+
+ stats->imissed = rte_le_to_cpu_64(resp->rx_drop_pkts);
+
+ return rc;
+}
+
+int bnxt_hwrm_func_clr_stats(struct bnxt *bp, uint16_t fid)
+{
+ int rc = 0;
+ struct hwrm_func_clr_stats_input req = {.req_type = 0};
+ struct hwrm_func_clr_stats_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_CLR_STATS, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(fid);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
/*
* HWRM utility functions
*/
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 1ecd660..f5bc4cc 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -64,6 +64,11 @@ int bnxt_hwrm_func_driver_register(struct bnxt *bp);
int bnxt_hwrm_func_qcaps(struct bnxt *bp);
int bnxt_hwrm_func_reset(struct bnxt *bp);
int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags);
+int bnxt_hwrm_func_qstats(struct bnxt *bp, uint16_t fid,
+ struct rte_eth_stats *stats);
+int bnxt_hwrm_func_qstats_tx_drop(struct bnxt *bp, uint16_t fid,
+ uint64_t *dropped);
+int bnxt_hwrm_func_clr_stats(struct bnxt *bp, uint16_t fid);
int bnxt_hwrm_func_cfg_def_cp(struct bnxt *bp);
int bnxt_hwrm_queue_qportcfg(struct bnxt *bp);
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index c730337..45d1117 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -2766,6 +2766,223 @@ struct hwrm_func_cfg_output {
*/
} __attribute__((packed));
+/* hwrm_func_qstats */
+/*
+ * Description: This command returns statistics of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The HWRM shall return any unsupported counter with a value
+ * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being queried. 0xFF...
+ * (All Fs) if the query is for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (176 bytes) */
+struct hwrm_func_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets on the function. */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets on the function. */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets on the function. */
+ uint64_t tx_err_pkts;
+ /*
+ * Number of transmitted packets that were discarded due to
+ * internal NIC resource problems. For transmit, this can only
+ * happen if TMP is configured to allow dropping in HOL blocking
+ * conditions, which is not a normal configuration.
+ */
+ uint64_t tx_drop_pkts;
+ /*
+ * Number of dropped packets on transmit path on the function.
+ * These are packets that have been marked for drop by the TE
+ * CFA block or are packets that exceeded the transmit MTU limit
+ * for the function.
+ */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic on the function. */
+ uint64_t tx_mcast_bytes;
+ /*
+ * Number of transmitted bytes for multicast traffic on the
+ * function.
+ */
+ uint64_t tx_bcast_bytes;
+ /*
+ * Number of transmitted bytes for broadcast traffic on the
+ * function.
+ */
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets on the function. */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets on the function. */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets on the function. */
+ uint64_t rx_err_pkts;
+ /*
+ * Number of received packets that were discarded on the
+ * function due to resource limitations. This can happen for 3
+ * reasons. # The BD used for the packet has a bad format. #
+ * There were no BDs available in the ring for the packet. #
+ * There were no BDs available on-chip for the packet.
+ */
+ uint64_t rx_drop_pkts;
+ /*
+ * Number of dropped packets on received path on the function.
+ * These are packets that have been marked for drop by the RE
+ * CFA.
+ */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic on the function. */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic on the function. */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic on the function. */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets on the function. */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes on the function. */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events on the function. */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations on the function. */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_clr_stats */
+/*
+ * Description: This command clears statistics of a function. The input FID
+ * value is used to indicate what function's statistics is being cleared. This
+ * allows a physical function driver to clear statistics of virtual functions
+ * that are children of the physical function.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function. 0xFF... (All Fs) if the query is
+ * for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_vf_vnic_ids_query */
/* Description: This command is used to query vf vnic ids. */
/* Input (32 bytes) */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
index 1f71d3a..f17b8c8 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.c
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -430,3 +430,90 @@ int rte_pmd_bnxt_set_vf_vlan_filter(struct rte_eth_dev *dev, uint16_t vlan,
return rc;
}
+
+int rte_pmd_bnxt_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to get VF %d stats on non-PF port %d!\n",
+ vf_id, port);
+ return -ENOTSUP;
+ }
+
+ return bnxt_hwrm_func_qstats(bp, bp->pf.first_vf_id + vf_id, stats);
+}
+
+int rte_pmd_bnxt_reset_vf_stats(uint8_t port,
+ uint16_t vf_id)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to reset VF %d stats on non-PF port %d!\n",
+ vf_id, port);
+ return -ENOTSUP;
+ }
+
+ return bnxt_hwrm_func_clr_stats(bp, bp->pf.first_vf_id + vf_id);
+}
+
+int rte_pmd_bnxt_get_tx_drop_count(uint8_t port, uint64_t *count)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ return bnxt_hwrm_func_qstats_tx_drop(bp, 0xffff, count);
+}
+
+int rte_pmd_bnxt_get_vf_tx_drop_count(uint8_t port, uint16_t vf_id,
+ uint64_t *count)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to query VF %d TX drops on non-PF port %d!\n",
+ vf_id, port);
+ return -ENOTSUP;
+ }
+
+ return bnxt_hwrm_func_qstats_tx_drop(bp, bp->pf.first_vf_id + vf_id,
+ count);
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index 87d1787..2fa4786 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -165,6 +165,41 @@ int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
uint16_t tx_rate, uint64_t q_msk);
/**
+ * Get VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters supported statistics:
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_bnxt_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_reset_vf_stats(uint8_t port,
+ uint16_t vf_id);
+
+/**
* Enable/Disable VF VLAN anti spoof
*
* @param port
@@ -181,4 +216,33 @@ int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_bnxt_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Queries the TX drop counter for the function
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param count
+ * Pointer to a uint64_t that will be populated with the counter value.
+ * @return
+ * - Positive Non-zero value - Error code from HWRM
+ */
+int rte_pmd_bnxt_get_tx_drop_count(uint8_t port, uint64_t *count);
+
+/**
+ * Queries the TX drop counter for the function
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param count
+ * Pointer to a uint64_t that will be populated with the counter value.
+ * @return
+ * - Positive Non-zero value - Error code from HWRM
+ * - (-EINVAL) invalid vf_id specified.
+ * - (-ENOTSUP) Ethernet device is not a PF
+ */
+int rte_pmd_bnxt_get_vf_tx_drop_count(uint8_t port, uint16_t vf_id,
+ uint64_t *count);
#endif /* _PMD_BNXT_H_ */
--
2.10.1 (Apple Git-78)
next prev parent reply other threads:[~2017-05-18 1:58 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-18 1:57 [dpdk-dev] [PATCH 00/23] bnxt patchset Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 01/23] bnxt: add various hwrm input/output structures Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 02/23] bnxt: code reorg to properly allocate resources in PF/VF modes Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 03/23] bnxt: add tunneling support Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 04/23] bnxt: support lack of huge pages Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 05/23] bnxt: add functions for tx_loopback, set_vf_mac and queues_drop_en Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 06/23] bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 07/23] bnxt: add support for VLAN stripq, VLAN anti spoof and VLAN filtering for VFs Ajit Khaparde
2017-05-18 1:57 ` Ajit Khaparde [this message]
2017-05-18 1:57 ` [dpdk-dev] [PATCH 09/23] bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 10/23] bnxt: add support to add a VF MAC address Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 11/23] bnxt: add support for xstats get/reset Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 12/23] bnxt: Add support for VLAN filter and strip dev_ops Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 13/23] bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 14/23] bnxt: add support for set_mc_addr_list and mac_addr_set Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 15/23] bnxt: add support for fw_version_get dev_op Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 16/23] bnxt: add support to set MTU Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 17/23] bnxt: add support for LRO Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 18/23] bnxt: add rxq_info_get and txq_info_get dev_ops Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 19/23] bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 20/23] bnxt: reorg the query stats code Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 21/23] bnxt: update to HWRM version 1.7.5 Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 22/23] bnxt: Add support to set VF rxmode Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 23/23] bnxt: add code to support vlan_pvid_set dev_op Ajit Khaparde
2017-05-22 10:55 ` [dpdk-dev] [PATCH 00/23] bnxt patchset Ferruh Yigit
2017-05-22 23:02 ` Thomas Monjalon
2017-05-23 17:58 ` Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 00/25] " Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 01/25] bnxt: update to new HWRM version Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 02/25] bnxt: code reorg to properly allocate resources for PF/VF Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 03/25] bnxt: handle VF/PF initialization appropriately Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 04/25] bnxt: support lack of huge pages Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 05/25] bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 06/25] bnxt: add tunneling support Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 07/25] bnxt: add support for xstats get/reset Ajit Khaparde
2017-05-29 17:42 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 08/25] bnxt: Add support for VLAN filter and strip dev_ops Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 09/25] bnxt: add support for set multicast addr list and MAC addr set Ajit Khaparde
2017-05-29 17:42 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 10/25] bnxt: add support for fw_version_get dev_op Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 11/25] bnxt: add support to set MTU Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 12/25] bnxt: add support for LRO Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 13/25] bnxt: add rxq/txq info_get dev_ops Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 14/25] bnxt: add code to support VLAN pvid set dev_op Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 15/25] bnxt: reorg the query stats code Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 16/25] bnxt: add support for led on/off Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 17/25] bnxt: add support for tx loopback, set vf mac and queues drop Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 18/25] bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 19/25] bnxt: add support for VLAN stripq, anti spoof and filtering for VFs Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 20/25] bnxt: add support to get and clear VF specific stats Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-31 2:12 ` Ajit Khaparde
2017-05-31 9:57 ` Ferruh Yigit
2017-05-31 14:27 ` Ajit Khaparde
2017-05-31 14:46 ` Ferruh Yigit
2017-05-31 16:15 ` Thomas Monjalon
2017-05-31 18:41 ` Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 21/25] bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 22/25] bnxt: add support to add a VF MAC address Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 23/25] bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 24/25] bnxt: Add support to set VF rxmode Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 25/25] update release notes Ajit Khaparde
2017-05-29 17:44 ` Ferruh Yigit
2017-05-29 17:44 ` [dpdk-dev] [PATCH v2 00/25] bnxt patchset Ferruh Yigit
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 00/26] " Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 01/26] net/bnxt: update to new HWRM version Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 02/26] net/bnxt: code reorg to properly allocate resources for PF/VF Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 03/26] net/bnxt: handle VF/PF initialization appropriately Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 04/26] net/bnxt: support lack of huge pages Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 05/26] net/bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 06/26] net/bnxt: add tunneling support Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 07/26] net/bnxt: add support for xstats get/reset Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 08/26] net/bnxt: add support for VLAN filter and strip Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 09/26] net/bnxt: add support for set multicast addr list and MAC addr set Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 10/26] doc: update bnxt.ini to document Allmulticast mode Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 11/26] net/bnxt: add support to get fw version Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 12/26] net/bnxt: add support to set MTU Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 13/26] net/bnxt: add support for LRO Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 14/26] net/bnxt: add rxq/txq info_get Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 15/26] net/bnxt: add code to support VLAN pvid Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 16/26] net/bnxt: reorg the query stats code Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 17/26] doc: update default.ini to add LED support Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 18/26] net/bnxt: add support for led on/off Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 19/26] net/bnxt: add support for tx loopback, set vf mac and queues drop Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 20/26] net/bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 21/26] net/bnxt: add support to get and clear VF specific stats Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 22/26] net/bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-06-01 12:28 ` Ferruh Yigit
2017-06-01 16:36 ` Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 23/26] net/bnxt: add support to add a VF MAC address Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 24/26] net/bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 25/26] net/bnxt: add support to set VF rxmode Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 26/26] doc: update release notes Ajit Khaparde
2017-06-01 17:06 ` [dpdk-dev] [PATCH v4 00/26] bnxt patchset Ajit Khaparde
2017-06-01 17:06 ` [dpdk-dev] [PATCH v4 01/26] net/bnxt: update to new HWRM version Ajit Khaparde
2017-06-01 17:06 ` [dpdk-dev] [PATCH v4 02/26] net/bnxt: code reorg to properly allocate resources for PF/VF Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 03/26] net/bnxt: handle VF/PF initialization appropriately Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 04/26] net/bnxt: support lack of huge pages Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 05/26] net/bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 06/26] net/bnxt: add tunneling support Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 07/26] net/bnxt: add support for xstats get/reset Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 08/26] net/bnxt: add support for VLAN filter and strip Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 09/26] net/bnxt: add support for set multicast addr list and MAC addr set Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 10/26] doc: update bnxt.ini to document Allmulticast mode Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 11/26] net/bnxt: add support to get fw version Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 12/26] net/bnxt: add support to set MTU Ajit Khaparde
2017-06-06 12:47 ` Ferruh Yigit
2017-06-06 14:00 ` Ajit Khaparde
2017-06-06 14:25 ` Ferruh Yigit
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 13/26] net/bnxt: add support for LRO Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 14/26] net/bnxt: add rxq/txq info_get Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 15/26] net/bnxt: add code to support VLAN pvid Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 16/26] net/bnxt: reorg the query stats code Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 17/26] doc: update default.ini to add LED support Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 18/26] net/bnxt: add support for led on/off Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 19/26] net/bnxt: add support for tx loopback, set vf mac and queues drop Ajit Khaparde
2017-06-06 12:53 ` Ferruh Yigit
2017-06-06 14:09 ` Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 20/26] net/bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 21/26] net/bnxt: add support to get and clear VF specific stats Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 22/26] net/bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 23/26] net/bnxt: add support to add a VF MAC address Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 24/26] net/bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 25/26] net/bnxt: add support to set VF rxmode Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 26/26] doc: update release notes Ajit Khaparde
2017-06-06 14:48 ` [dpdk-dev] [PATCH v4 00/26] bnxt patchset Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170518015813.7862-9-ajit.khaparde@broadcom.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=stephen.hurd@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).