From: Santosh Shukla <santosh.shukla@caviumnetworks.com>
To: thomas@monjalon.net, dev@dpdk.org, olivier.matz@6wind.com
Cc: jerin.jacob@caviumnetworks.com, hemant.agrawal@nxp.com,
Santosh Shukla <santosh.shukla@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v2 1/2] eal: allow user to override default pool handle
Date: Thu, 20 Jul 2017 12:36:12 +0530 [thread overview]
Message-ID: <20170720070613.18211-2-santosh.shukla@caviumnetworks.com> (raw)
In-Reply-To: <20170720070613.18211-1-santosh.shukla@caviumnetworks.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
---
v1 --> v2:
(Changes per review feedback from Olivier)
- Renamed rte_eal_get_mempool_name to rte_eal_mbuf_default_mempool_ops().
- Added support in bsdapp too.
Few changes considered while working on v2 like:
- Choosing eal arg name 'mbuf-pool-ops' out of 3 proposed names by Olivier.
Initialy thought to use eal arg 'mbuf-default-mempool-ops' But
since its way too long and user may find difficult to use it. That's why
chose 'mbuf-pool-ops', As that name very close to api name and #define.
- Adding new RTE_ for NAMESIZE in rte_eal.h called
'RTE_MBUF_DEFAULT_MEMPOOL_OPS'.
lib/librte_eal/bsdapp/eal/eal.c | 17 +++++++++++++++++
lib/librte_eal/bsdapp/eal/rte_eal_version.map | 1 +
lib/librte_eal/common/eal_common_options.c | 5 +++++
lib/librte_eal/common/eal_internal_cfg.h | 1 +
lib/librte_eal/common/eal_options.h | 2 ++
lib/librte_eal/common/include/rte_eal.h | 11 +++++++++++
lib/librte_eal/linuxapp/eal/eal.c | 18 ++++++++++++++++++
lib/librte_eal/linuxapp/eal/rte_eal_version.map | 1 +
lib/librte_mbuf/rte_mbuf.c | 5 +++--
9 files changed, 59 insertions(+), 2 deletions(-)
diff --git a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/bsdapp/eal/eal.c
index 80fe21de3..461d81bde 100644
--- a/lib/librte_eal/bsdapp/eal/eal.c
+++ b/lib/librte_eal/bsdapp/eal/eal.c
@@ -112,6 +112,13 @@ struct internal_config internal_config;
/* used by rte_rdtsc() */
int rte_cycles_vmware_tsc_map;
+/* Return mbuf pool name */
+const char *
+rte_eal_mbuf_default_mempool_ops(void)
+{
+ return internal_config.mbuf_pool_name;
+}
+
/* Return a pointer to the configuration structure */
struct rte_config *
rte_eal_get_configuration(void)
@@ -385,6 +392,16 @@ eal_parse_args(int argc, char **argv)
continue;
switch (opt) {
+ case OPT_MBUF_POOL_OPS_NUM:
+ ret = snprintf(internal_config.mbuf_pool_name,
+ sizeof(internal_config.mbuf_pool_name),
+ "%s", optarg);
+ if (ret < 0 || (uint32_t)ret >=
+ sizeof(internal_config.mbuf_pool_name)) {
+ ret = -1;
+ goto out;
+ }
+ break;
case 'h':
eal_usage(prgname);
exit(EXIT_SUCCESS);
diff --git a/lib/librte_eal/bsdapp/eal/rte_eal_version.map b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
index f689f0c8f..ed5f329cd 100644
--- a/lib/librte_eal/bsdapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
@@ -200,6 +200,7 @@ DPDK_17.08 {
rte_bus_find;
rte_bus_find_by_device;
rte_bus_find_by_name;
+ rte_eal_mbuf_default_mempool_ops;
} DPDK_17.05;
diff --git a/lib/librte_eal/common/eal_common_options.c b/lib/librte_eal/common/eal_common_options.c
index 56c368cde..9b0e73504 100644
--- a/lib/librte_eal/common/eal_common_options.c
+++ b/lib/librte_eal/common/eal_common_options.c
@@ -97,6 +97,7 @@ eal_long_options[] = {
{OPT_VFIO_INTR, 1, NULL, OPT_VFIO_INTR_NUM },
{OPT_VMWARE_TSC_MAP, 0, NULL, OPT_VMWARE_TSC_MAP_NUM },
{OPT_XEN_DOM0, 0, NULL, OPT_XEN_DOM0_NUM },
+ {OPT_MBUF_POOL_OPS, 1, NULL, OPT_MBUF_POOL_OPS_NUM},
{0, 0, NULL, 0 }
};
@@ -163,6 +164,9 @@ eal_reset_internal_config(struct internal_config *internal_cfg)
#endif
internal_cfg->vmware_tsc_map = 0;
internal_cfg->create_uio_dev = 0;
+ snprintf(internal_cfg->mbuf_pool_name,
+ sizeof(internal_cfg->mbuf_pool_name), "%s",
+ RTE_MBUF_DEFAULT_MEMPOOL_OPS);
}
static int
@@ -1246,5 +1250,6 @@ eal_common_usage(void)
" --"OPT_NO_PCI" Disable PCI\n"
" --"OPT_NO_HPET" Disable HPET\n"
" --"OPT_NO_SHCONF" No shared config (mmap'd files)\n"
+ " --"OPT_MBUF_POOL_OPS" Pool ops name for mbuf to use\n"
"\n", RTE_MAX_LCORE);
}
diff --git a/lib/librte_eal/common/eal_internal_cfg.h b/lib/librte_eal/common/eal_internal_cfg.h
index 7b7e8c887..e8a770a42 100644
--- a/lib/librte_eal/common/eal_internal_cfg.h
+++ b/lib/librte_eal/common/eal_internal_cfg.h
@@ -83,6 +83,7 @@ struct internal_config {
const char *hugefile_prefix; /**< the base filename of hugetlbfs files */
const char *hugepage_dir; /**< specific hugetlbfs directory to use */
+ char mbuf_pool_name[RTE_MBUF_POOL_OPS_NAMESIZE]; /**< mbuf pool name */
unsigned num_hugepage_sizes; /**< how many sizes on this system */
struct hugepage_info hugepage_info[MAX_HUGEPAGE_SIZES];
};
diff --git a/lib/librte_eal/common/eal_options.h b/lib/librte_eal/common/eal_options.h
index a881c62e2..34e6417e4 100644
--- a/lib/librte_eal/common/eal_options.h
+++ b/lib/librte_eal/common/eal_options.h
@@ -83,6 +83,8 @@ enum {
OPT_VMWARE_TSC_MAP_NUM,
#define OPT_XEN_DOM0 "xen-dom0"
OPT_XEN_DOM0_NUM,
+#define OPT_MBUF_POOL_OPS "mbuf-pool-ops"
+ OPT_MBUF_POOL_OPS_NUM,
OPT_LONG_MAX_NUM
};
diff --git a/lib/librte_eal/common/include/rte_eal.h b/lib/librte_eal/common/include/rte_eal.h
index 0e7363d77..fcd212843 100644
--- a/lib/librte_eal/common/include/rte_eal.h
+++ b/lib/librte_eal/common/include/rte_eal.h
@@ -54,6 +54,8 @@ extern "C" {
/* Maximum thread_name length. */
#define RTE_MAX_THREAD_NAME_LEN 16
+/* Maximum length of mbuf pool ops name. */
+#define RTE_MBUF_POOL_OPS_NAMESIZE 32
/**
* The lcore role (used in RTE or not).
@@ -287,6 +289,15 @@ static inline int rte_gettid(void)
return RTE_PER_LCORE(_thread_id);
}
+/**
+ * Ops to get default pool name for mbuf
+ *
+ * @return
+ * returns default pool name.
+ */
+const char *
+rte_eal_mbuf_default_mempool_ops(void);
+
#define RTE_INIT(func) \
static void __attribute__((constructor, used)) func(void)
diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c
index b28bbab54..1bf4e882f 100644
--- a/lib/librte_eal/linuxapp/eal/eal.c
+++ b/lib/librte_eal/linuxapp/eal/eal.c
@@ -121,6 +121,13 @@ struct internal_config internal_config;
/* used by rte_rdtsc() */
int rte_cycles_vmware_tsc_map;
+/* Return mbuf pool name */
+const char *
+rte_eal_mbuf_default_mempool_ops(void)
+{
+ return internal_config.mbuf_pool_name;
+}
+
/* Return a pointer to the configuration structure */
struct rte_config *
rte_eal_get_configuration(void)
@@ -610,6 +617,17 @@ eal_parse_args(int argc, char **argv)
internal_config.create_uio_dev = 1;
break;
+ case OPT_MBUF_POOL_OPS_NUM:
+ ret = snprintf(internal_config.mbuf_pool_name,
+ sizeof(internal_config.mbuf_pool_name),
+ "%s", optarg);
+ if (ret < 0 || (uint32_t)ret >=
+ sizeof(internal_config.mbuf_pool_name)) {
+ ret = -1;
+ goto out;
+ }
+ break;
+
default:
if (opt < OPT_LONG_MIN_NUM && isprint(opt)) {
RTE_LOG(ERR, EAL, "Option %c is not supported "
diff --git a/lib/librte_eal/linuxapp/eal/rte_eal_version.map b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
index 202072189..e90e0e062 100644
--- a/lib/librte_eal/linuxapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
@@ -205,6 +205,7 @@ DPDK_17.08 {
rte_bus_find;
rte_bus_find_by_device;
rte_bus_find_by_name;
+ rte_eal_mbuf_default_mempool_ops;
} DPDK_17.05;
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index 26a62b8e1..e1fc90ef3 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -157,6 +157,7 @@ rte_pktmbuf_pool_create(const char *name, unsigned n,
{
struct rte_mempool *mp;
struct rte_pktmbuf_pool_private mbp_priv;
+ const char *mp_name;
unsigned elt_size;
int ret;
@@ -176,8 +177,8 @@ rte_pktmbuf_pool_create(const char *name, unsigned n,
if (mp == NULL)
return NULL;
- ret = rte_mempool_set_ops_byname(mp,
- RTE_MBUF_DEFAULT_MEMPOOL_OPS, NULL);
+ mp_name = rte_eal_mbuf_default_mempool_ops();
+ ret = rte_mempool_set_ops_byname(mp, mp_name, NULL);
if (ret != 0) {
RTE_LOG(ERR, MBUF, "error setting mempool handler\n");
rte_mempool_free(mp);
--
2.11.0
next prev parent reply other threads:[~2017-07-20 7:07 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 8:05 [dpdk-dev] [PATCH 0/2] Allow application set mempool handle Santosh Shukla
2017-06-01 8:05 ` [dpdk-dev] [PATCH 1/2] eal: Introducing option to " Santosh Shukla
2017-06-30 14:12 ` Olivier Matz
2017-07-04 12:33 ` santosh
2017-06-01 8:05 ` [dpdk-dev] [PATCH 2/2] ether/ethdev: Allow pmd to advertise preferred pool capability Santosh Shukla
2017-06-30 14:13 ` Olivier Matz
2017-07-04 12:39 ` santosh
2017-07-04 13:07 ` Olivier Matz
2017-07-04 14:12 ` Jerin Jacob
2017-06-19 11:52 ` [dpdk-dev] [PATCH 0/2] Allow application set mempool handle Hemant Agrawal
2017-06-19 13:01 ` Jerin Jacob
2017-06-20 10:37 ` Hemant Agrawal
2017-06-20 14:04 ` Jerin Jacob
2017-06-30 14:12 ` Olivier Matz
2017-07-04 12:25 ` santosh
2017-07-04 15:59 ` Olivier Matz
2017-07-05 7:48 ` santosh
2017-07-20 7:06 ` [dpdk-dev] [PATCH v2 0/2] Dynamically configure " Santosh Shukla
2017-07-20 7:06 ` Santosh Shukla [this message]
2017-08-15 8:07 ` [dpdk-dev] [PATCH v3 " Santosh Shukla
2017-08-15 8:07 ` [dpdk-dev] [PATCH v3 1/2] eal: allow user to override default pool handle Santosh Shukla
2017-09-04 11:46 ` Olivier MATZ
2017-09-07 9:25 ` Hemant Agrawal
2017-08-15 8:07 ` [dpdk-dev] [PATCH v3 2/2] ethdev: allow pmd to advertise " Santosh Shukla
2017-09-04 12:11 ` Olivier MATZ
2017-09-04 13:14 ` santosh
2017-09-07 9:21 ` Hemant Agrawal
2017-09-07 10:06 ` santosh
2017-09-07 10:11 ` santosh
2017-09-07 11:08 ` Hemant Agrawal
2017-09-11 9:33 ` Olivier MATZ
2017-09-11 12:40 ` santosh
2017-09-11 13:00 ` Olivier MATZ
2017-09-04 9:41 ` [dpdk-dev] [PATCH v3 0/2] Dynamically configure mempool handle Sergio Gonzalez Monroy
2017-09-04 13:20 ` santosh
2017-09-04 13:34 ` Olivier MATZ
2017-09-04 14:24 ` Sergio Gonzalez Monroy
2017-09-05 7:47 ` Olivier MATZ
2017-09-05 8:11 ` Jerin Jacob
2017-09-11 15:18 ` [dpdk-dev] [PATCH v4 " Santosh Shukla
2017-09-11 15:18 ` [dpdk-dev] [PATCH v4 1/2] eal: allow user to override default pool handle Santosh Shukla
2017-09-25 7:28 ` Olivier MATZ
2017-09-25 21:23 ` santosh
2017-09-11 15:18 ` [dpdk-dev] [PATCH v4 2/2] ethdev: get the supported pools for a port Santosh Shukla
2017-09-25 7:37 ` Olivier MATZ
2017-09-25 21:52 ` santosh
2017-09-29 5:00 ` santosh
2017-09-29 8:32 ` Olivier MATZ
2017-09-29 10:16 ` santosh
2017-09-29 11:21 ` santosh
2017-09-29 11:23 ` Olivier MATZ
2017-09-29 11:31 ` santosh
2017-09-13 10:00 ` [dpdk-dev] [PATCH v4 0/2] Dynamically configure mempool handle santosh
2017-09-19 8:28 ` santosh
2017-09-25 7:24 ` Olivier MATZ
2017-09-25 21:58 ` santosh
2017-10-01 9:14 ` [dpdk-dev] [PATCH v5 " Santosh Shukla
2017-10-01 9:14 ` [dpdk-dev] [PATCH v5 1/2] eal: allow user to override default pool handle Santosh Shukla
2017-10-02 14:29 ` Olivier MATZ
2017-10-06 0:29 ` Thomas Monjalon
2017-10-06 3:31 ` santosh
2017-10-06 8:39 ` Thomas Monjalon
2017-10-06 7:45 ` [dpdk-dev] [PATCH v6 0/2] Dynamically configure mempool handle Santosh Shukla
2017-10-06 7:45 ` [dpdk-dev] [PATCH v6 1/2] eal: allow user to override default pool handle Santosh Shukla
2017-10-06 7:45 ` [dpdk-dev] [PATCH v6 2/2] ethdev: get the supported pool for a port Santosh Shukla
2017-10-06 18:58 ` [dpdk-dev] [PATCH v6 0/2] Dynamically configure mempool handle Thomas Monjalon
2017-10-01 9:14 ` [dpdk-dev] [PATCH v5 2/2] ethdev: get the supported pool for a port Santosh Shukla
2017-10-02 14:31 ` Olivier MATZ
2017-10-06 0:30 ` Thomas Monjalon
2017-10-06 3:32 ` santosh
2017-10-02 8:37 ` [dpdk-dev] [PATCH v5 0/2] Dynamically configure mempool handle santosh
2017-07-20 7:06 ` [dpdk-dev] [PATCH v2 2/2] ethdev: allow pmd to advertise pool handle Santosh Shukla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170720070613.18211-2-santosh.shukla@caviumnetworks.com \
--to=santosh.shukla@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=olivier.matz@6wind.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).