DPDK patches and discussions
 help / color / mirror / Atom feed
From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Cc: thomas@monjalon.net, Bruce Richardson <bruce.richardson@intel.com>
Subject: [dpdk-dev] [RFCv2 35/40] build: add packet framework libs to meson build
Date: Mon, 14 Aug 2017 10:52:03 +0100	[thread overview]
Message-ID: <20170814095208.166496-36-bruce.richardson@intel.com> (raw)
In-Reply-To: <20170814095208.166496-1-bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 lib/librte_pipeline/meson.build | 35 +++++++++++++++++++++++++
 lib/librte_port/meson.build     | 58 +++++++++++++++++++++++++++++++++++++++++
 lib/librte_table/meson.build    | 52 ++++++++++++++++++++++++++++++++++++
 lib/meson.build                 |  6 ++++-
 4 files changed, 150 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_pipeline/meson.build
 create mode 100644 lib/librte_port/meson.build
 create mode 100644 lib/librte_table/meson.build

diff --git a/lib/librte_pipeline/meson.build b/lib/librte_pipeline/meson.build
new file mode 100644
index 000000000..56a3cf69f
--- /dev/null
+++ b/lib/librte_pipeline/meson.build
@@ -0,0 +1,35 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+version = 3
+sources = files('rte_pipeline.c')
+headers = files('rte_pipeline.h')
+deps += ['port', 'table']
\ No newline at end of file
diff --git a/lib/librte_port/meson.build b/lib/librte_port/meson.build
new file mode 100644
index 000000000..a130f6eb6
--- /dev/null
+++ b/lib/librte_port/meson.build
@@ -0,0 +1,58 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+version = 3
+sources = files(
+	'rte_port_ethdev.c',
+	'rte_port_fd.c',
+	'rte_port_ring.c',
+	'rte_port_sched.c',
+	'rte_port_source_sink.c')
+headers = files(
+	'rte_port_ethdev.h',
+	'rte_port_fd.h',
+	'rte_port.h',
+	'rte_port_ring.h',
+	'rte_port_sched.h',
+	'rte_port_source_sink.h')
+deps = ['ether', 'sched']
+
+if dpdk_conf.has('RTE_LIBRTE_IP_FRAG')
+	sources += files('rte_port_frag.c', 'rte_port_ras.c')
+	headers += files('rte_port_frag.h', 'rte_port_ras.h')
+	deps += ['ip_frag']
+endif
+
+if dpdk_conf.has('RTE_LIBRTE_KNI')
+	sources += files('rte_port_kni.c')
+	headers += files('rte_port_kni.h')
+	deps += 'kni'
+endif
diff --git a/lib/librte_table/meson.build b/lib/librte_table/meson.build
new file mode 100644
index 000000000..66069a74b
--- /dev/null
+++ b/lib/librte_table/meson.build
@@ -0,0 +1,52 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+version = 2
+sources = files('rte_table_lpm.c', 'rte_table_lpm_ipv6.c',
+		'rte_table_hash_cuckoo.c', 'rte_table_hash_key8.c',
+		'rte_table_hash_key16.c', 'rte_table_hash_key32.c',
+		'rte_table_hash_ext.c', 'rte_table_hash_lru.c',
+		'rte_table_array.c', 'rte_table_stub.c')
+headers = files('rte_table.h', 'rte_table_lpm.h',
+		'rte_table_lpm_ipv6.h', 'rte_table_hash.h',
+		'rte_lru.h', 'rte_table_array.h',
+		'rte_table_stub.h')
+deps = ['mbuf', 'port', 'lpm', 'hash']
+
+if arch_subdir == 'x86'
+	headers += files('rte_lru_x86.h')
+endif
+
+if dpdk_conf.has('RTE_LIBRTE_ACL')
+	sources += files('rte_table_acl.c')
+	headers += files('rte_table_acl.h')
+	deps += ['acl']
+endif
\ No newline at end of file
diff --git a/lib/meson.build b/lib/meson.build
index 453d6ee0d..92d26b8aa 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -47,12 +47,16 @@ libs = ['ring', 'mempool', 'mbuf', 'net', 'ether', # core
 	'efd', 'eventdev', 'gro', 'ip_frag', 'jobstats',
 	'latencystats', 'lpm', 'meter', 'pdump', 'reorder', 'sched',
 	'timer']
-# pipeline, port, table, acl # todo
+# acl - todo
 
 if host_machine.system() == 'linux'
 	libs += ['kni', 'power', 'vhost']
 endif
 
+# add pkt framework libs which use other libs from above, including optional
+# ones for linux
+libs += ['port', 'table', 'pipeline']
+
 foreach l:libs
 	version = 1
 	sources = []
-- 
2.13.4

  parent reply	other threads:[~2017-08-14 10:03 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-14  9:51 [dpdk-dev] [RFCv2 00/40] Building DPDK with meson and ninja Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 01/40] build: initial hooks for using meson with DPDK Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 02/40] build: create pkg-config file for DPDK Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 03/40] build: build linuxapp EAL with meson and ninja Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 04/40] build: add EAL support under BSD Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 05/40] build: add core libraries to meson build system Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 06/40] build: add i40e driver to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 07/40] build: add pmdinfogen to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 08/40] build: generate list of sources for pmdinfogen Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 09/40] build: build i40e driver, including pmdinfo Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 10/40] build: install usertools scripts Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 11/40] build: simplify generation of pmd.c files Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 12/40] build: generalize net driver build to higher level Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 13/40] build: remove hard-coded enablement of vector driver Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 14/40] build: add ixgbe driver to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 15/40] build: set up standard deps for drivers Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 16/40] build: add af_packet driver to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 17/40] build: add pcap PMD support Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 18/40] build: add symbol version map file support to libs Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 19/40] build: build libraries in a loop for brevity Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 20/40] build: version library .so files Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 21/40] eal: add version information to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 22/40] build: add mempool drivers to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 23/40] build: add gro library to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 24/40] build: tweak naming of pmd dependencies Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 25/40] build: track driver include directories properly Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 26/40] metrics: add metrics lib to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 27/40] build: track dependencies recursively Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 28/40] testpmd: compile testpmd with meson and ninja Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 29/40] crypto/null: rename the version file to standard Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 30/40] crypto/qat: remove dependency on ether library Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 31/40] build: add cryptodev and some crypto drivers to build Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 32/40] igb_uio: add igb_uio to meson build Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 33/40] ip_frag: rename version file to standard name Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 34/40] build: add most remaining libraries to meson build Bruce Richardson
2017-08-14  9:52 ` Bruce Richardson [this message]
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 36/40] acl: add acl library " Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 37/40] build: add ark and avp PMDs to build Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 38/40] build: fix static library builds with base code Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 39/40] build: fix driver dependencies for static builds Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 40/40] examples: allow basic sample app build using pkg-config Bruce Richardson
2017-08-15 10:56 ` [dpdk-dev] [RFCv2 00/40] Building DPDK with meson and ninja Luca Boccassi
2017-08-15 11:31   ` Bruce Richardson
2017-08-17 14:10 ` Marco Varlese
2017-08-17 15:25   ` Luca Boccassi
2017-08-18  8:35     ` Bruce Richardson
2017-08-18  8:52       ` Marco Varlese
2017-08-18  9:17         ` Marco Varlese
2017-08-18  9:33       ` Luca Boccassi
     [not found]   ` <1502983469.31476.3.camel@gmail.com>
2017-08-18  8:00     ` Marco Varlese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170814095208.166496-36-bruce.richardson@intel.com \
    --to=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).