DPDK patches and discussions
 help / color / mirror / Atom feed
From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Cc: thomas@monjalon.net, Bruce Richardson <bruce.richardson@intel.com>
Subject: [dpdk-dev] [RFCv2 36/40] acl: add acl library to meson build
Date: Mon, 14 Aug 2017 10:52:04 +0100	[thread overview]
Message-ID: <20170814095208.166496-37-bruce.richardson@intel.com> (raw)
In-Reply-To: <20170814095208.166496-1-bruce.richardson@intel.com>

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 lib/librte_acl/meson.build | 60 ++++++++++++++++++++++++++++++++++++++++++++++
 lib/meson.build            | 18 ++++++++------
 2 files changed, 71 insertions(+), 7 deletions(-)
 create mode 100644 lib/librte_acl/meson.build

diff --git a/lib/librte_acl/meson.build b/lib/librte_acl/meson.build
new file mode 100644
index 000000000..ddaf29bf5
--- /dev/null
+++ b/lib/librte_acl/meson.build
@@ -0,0 +1,60 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+version = 2
+sources = files('acl_bld.c', 'acl_gen.c', 'acl_run_scalar.c',
+		'rte_acl.c', 'tb_mem.c')
+headers = files('rte_acl.h', 'rte_acl_osdep.h')
+deps += ['eal']
+
+if arch_subdir == 'x86'
+	sources += files('acl_run_sse.c')
+
+	# compile AVX2 version if either:
+	# a. we have AVX supported in minimum instruction set baseline
+	# b. it's not minimum instruction set, but supported by compiler
+	#
+	# in former case, just add avx2 C file to files list
+	# in latter case, compile c file to static lib, using correct compiler
+	# flags, and then have the .o file from static lib linked into main lib.
+	if dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX2')
+		sources += files('acl_run_avx2.c')
+		cflags += '-DCC_AVX2_SUPPORT'
+	elif cc.has_argument('-mavx2')
+		avx2_tmplib = static_library('avx2_tmp',
+				'acl_run_avx2.c',
+				dependencies: rte_eal,
+				c_args: '-mavx2')
+		objs += avx2_tmplib.extract_objects('acl_run_avx2.c')
+		cflags += '-DCC_AVX2_SUPPORT'
+	endif
+
+endif
diff --git a/lib/meson.build b/lib/meson.build
index 92d26b8aa..54efb4ba7 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -39,28 +39,30 @@ subdir('librte_compat')
 # sometimes skip deps that would be implied by others, e.g. if mempool is
 # given as a dep, no need to mention ring. This is especially true for the
 # core libs which are widely reused, so their deps are kept to a minimum.
-libs = ['ring', 'mempool', 'mbuf', 'net', 'ether', # core
+libraries = ['ring', 'mempool', 'mbuf', 'net', 'ether', # core
 	'metrics', # bitrate/latency stats depends on this
 	'hash',    # efd depends on this
 	'kvargs',  # cryptodev depends on this
-	'bitratestats', 'cfgfile', 'cmdline', 'cryptodev', 'distributor',
-	'efd', 'eventdev', 'gro', 'ip_frag', 'jobstats',
+	'acl', 'bitratestats', 'cfgfile', 'cmdline', 'cryptodev',
+	'distributor', 'efd', 'eventdev', 'gro', 'ip_frag', 'jobstats',
 	'latencystats', 'lpm', 'meter', 'pdump', 'reorder', 'sched',
 	'timer']
-# acl - todo
 
 if host_machine.system() == 'linux'
-	libs += ['kni', 'power', 'vhost']
+	libraries += ['kni', 'power', 'vhost']
 endif
 
 # add pkt framework libs which use other libs from above, including optional
 # ones for linux
-libs += ['port', 'table', 'pipeline']
+libraries += ['port', 'table', 'pipeline']
 
-foreach l:libs
+foreach l:libraries
 	version = 1
 	sources = []
 	headers = []
+	cflags = []
+	objs = [] # other object files to link against, used e.g. for instruction-
+	          # optimized versions of code
 	# use "deps" for internal DPDK dependencies, and "ext_deps" for
 	# external package/library requirements
 	deps = []
@@ -85,6 +87,8 @@ foreach l:libs
 	endif
 	lib = library(libname,
 			sources,
+			objects: objs,
+			c_args: cflags,
 			dependencies: dep_objs,
 			include_directories: include_directories(dir_name),
 			link_args: '-Wl,--version-script=' + version_map,
-- 
2.13.4

  parent reply	other threads:[~2017-08-14 10:03 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-14  9:51 [dpdk-dev] [RFCv2 00/40] Building DPDK with meson and ninja Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 01/40] build: initial hooks for using meson with DPDK Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 02/40] build: create pkg-config file for DPDK Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 03/40] build: build linuxapp EAL with meson and ninja Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 04/40] build: add EAL support under BSD Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 05/40] build: add core libraries to meson build system Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 06/40] build: add i40e driver to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 07/40] build: add pmdinfogen to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 08/40] build: generate list of sources for pmdinfogen Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 09/40] build: build i40e driver, including pmdinfo Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 10/40] build: install usertools scripts Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 11/40] build: simplify generation of pmd.c files Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 12/40] build: generalize net driver build to higher level Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 13/40] build: remove hard-coded enablement of vector driver Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 14/40] build: add ixgbe driver to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 15/40] build: set up standard deps for drivers Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 16/40] build: add af_packet driver to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 17/40] build: add pcap PMD support Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 18/40] build: add symbol version map file support to libs Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 19/40] build: build libraries in a loop for brevity Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 20/40] build: version library .so files Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 21/40] eal: add version information to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 22/40] build: add mempool drivers to build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 23/40] build: add gro library to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 24/40] build: tweak naming of pmd dependencies Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 25/40] build: track driver include directories properly Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 26/40] metrics: add metrics lib to meson build Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 27/40] build: track dependencies recursively Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 28/40] testpmd: compile testpmd with meson and ninja Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 29/40] crypto/null: rename the version file to standard Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 30/40] crypto/qat: remove dependency on ether library Bruce Richardson
2017-08-14  9:51 ` [dpdk-dev] [RFCv2 31/40] build: add cryptodev and some crypto drivers to build Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 32/40] igb_uio: add igb_uio to meson build Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 33/40] ip_frag: rename version file to standard name Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 34/40] build: add most remaining libraries to meson build Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 35/40] build: add packet framework libs " Bruce Richardson
2017-08-14  9:52 ` Bruce Richardson [this message]
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 37/40] build: add ark and avp PMDs to build Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 38/40] build: fix static library builds with base code Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 39/40] build: fix driver dependencies for static builds Bruce Richardson
2017-08-14  9:52 ` [dpdk-dev] [RFCv2 40/40] examples: allow basic sample app build using pkg-config Bruce Richardson
2017-08-15 10:56 ` [dpdk-dev] [RFCv2 00/40] Building DPDK with meson and ninja Luca Boccassi
2017-08-15 11:31   ` Bruce Richardson
2017-08-17 14:10 ` Marco Varlese
2017-08-17 15:25   ` Luca Boccassi
2017-08-18  8:35     ` Bruce Richardson
2017-08-18  8:52       ` Marco Varlese
2017-08-18  9:17         ` Marco Varlese
2017-08-18  9:33       ` Luca Boccassi
     [not found]   ` <1502983469.31476.3.camel@gmail.com>
2017-08-18  8:00     ` Marco Varlese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170814095208.166496-37-bruce.richardson@intel.com \
    --to=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).