From: David Harton <dharton@cisco.com>
To: jingjing.wu@intel.com, beilei.xing@intel.com
Cc: dev@dpdk.org, David Harton <dharton@cisco.com>
Subject: [dpdk-dev] [PATCH] i40e: fix i40e_validate_mac_addr to permit multicast addresses
Date: Tue, 22 Aug 2017 18:21:46 -0400 [thread overview]
Message-ID: <20170822222146.36912-1-dharton@cisco.com> (raw)
The i40e maintains a single MAC filter table for both
unicast and multicast addresses. The i40e_validate_mac_addr
function was preventing multicast addresses from being added
to the table via i40evf_add_mac_addr. Fixed the issue by
removing the multicast address check in i40e_validate_mac_addr.
Signed-off-by: David Harton <dharton@cisco.com>
---
drivers/net/i40e/base/i40e_common.c | 12 +++++-------
drivers/net/i40e/i40e_ethdev.c | 3 ++-
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c
index 900d379..9779854 100644
--- a/drivers/net/i40e/base/i40e_common.c
+++ b/drivers/net/i40e/base/i40e_common.c
@@ -969,10 +969,10 @@ struct i40e_rx_ptype_decoded i40e_ptype_lookup[] = {
/**
- * i40e_validate_mac_addr - Validate unicast MAC address
+ * i40e_validate_mac_addr - Validate MAC address
* @mac_addr: pointer to MAC address
*
- * Tests a MAC address to ensure it is a valid Individual Address
+ * Tests a MAC address to ensure it is a valid Address
**/
enum i40e_status_code i40e_validate_mac_addr(u8 *mac_addr)
{
@@ -980,13 +980,11 @@ enum i40e_status_code i40e_validate_mac_addr(u8 *mac_addr)
DEBUGFUNC("i40e_validate_mac_addr");
- /* Broadcast addresses ARE multicast addresses
- * Make sure it is not a multicast address
+ /*
* Reject the zero address
*/
- if (I40E_IS_MULTICAST(mac_addr) ||
- (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
- mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0))
+ if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
status = I40E_ERR_INVALID_MAC_ADDR;
return status;
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 5f26e24..00b6082 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -1199,7 +1199,8 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
/* Get and check the mac address */
i40e_get_mac_addr(hw, hw->mac.addr);
- if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS) {
+ if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS ||
+ I40E_IS_MULTICAST(hw->mac.addr)) {
PMD_INIT_LOG(ERR, "mac address is not valid");
ret = -EIO;
goto err_get_mac_addr;
--
2.10.3.dirty
next reply other threads:[~2017-08-22 22:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-22 22:21 David Harton [this message]
2017-08-31 15:53 ` Ferruh Yigit
2017-08-31 16:04 ` David Harton (dharton)
2017-09-08 12:51 ` David Harton (dharton)
2017-09-08 12:56 ` Ferruh Yigit
2017-09-11 5:41 ` Xing, Beilei
2017-09-11 17:22 ` David Harton (dharton)
2017-09-12 3:00 ` Xing, Beilei
2017-09-12 13:02 ` [dpdk-dev] [PATCH v2] i40e: fix i40evf_add_mac_addr " David Harton
2017-09-13 2:20 ` Xing, Beilei
2017-09-13 2:38 ` David Harton (dharton)
2017-09-13 2:43 ` Xing, Beilei
2017-09-13 3:21 ` [dpdk-dev] [PATCH v3] " David Harton
2017-09-13 3:42 ` Xing, Beilei
2017-09-14 18:55 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170822222146.36912-1-dharton@cisco.com \
--to=dharton@cisco.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).