DPDK patches and discussions
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 1/6] testpmd: remove unnecessary void casts
Date: Wed, 23 Aug 2017 08:44:40 -0700	[thread overview]
Message-ID: <20170823154445.19494-2-stephen@networkplumber.org> (raw)
In-Reply-To: <20170823154445.19494-1-stephen@networkplumber.org>

The testpmd was doing old BSD lint style casts of rte_memcpy
to (void). This is unnecessary.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test-pmd/cmdline.c | 14 +++++++-------
 app/test-pmd/config.c  |  4 ++--
 app/test-pmd/testpmd.c |  2 +-
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index cd8c358509c2..5c533ffc0d41 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -6960,7 +6960,7 @@ cmd_set_vf_macvlan_parsed(void *parsed_result,
 
 	memset(&filter, 0, sizeof(struct rte_eth_mac_filter));
 
-	(void)rte_memcpy(&filter.mac_addr, &res->address, ETHER_ADDR_LEN);
+	rte_memcpy(&filter.mac_addr, &res->address, ETHER_ADDR_LEN);
 
 	/* set VF MAC filter */
 	filter.is_vf = 1;
@@ -8823,7 +8823,7 @@ cmd_ethertype_filter_parsed(void *parsed_result,
 	memset(&filter, 0, sizeof(filter));
 	if (!strcmp(res->mac, "mac_addr")) {
 		filter.flags |= RTE_ETHTYPE_FLAGS_MAC;
-		(void)rte_memcpy(&filter.mac_addr, &res->mac_addr,
+		rte_memcpy(&filter.mac_addr, &res->mac_addr,
 			sizeof(struct ether_addr));
 	}
 	if (!strcmp(res->drop, "drop"))
@@ -9012,7 +9012,7 @@ do { \
 #define IPV6_ADDR_TO_ARRAY(ip_addr, ip) \
 do { \
 	if ((ip_addr).family == AF_INET6) \
-		(void)rte_memcpy(&(ip), \
+		rte_memcpy(&(ip), \
 				 &((ip_addr).addr.ipv6), \
 				 sizeof(struct in6_addr)); \
 	else { \
@@ -9144,12 +9144,12 @@ cmd_flow_director_filter_parsed(void *parsed_result,
 	}
 
 	if (fdir_conf.mode ==  RTE_FDIR_MODE_PERFECT_MAC_VLAN)
-		(void)rte_memcpy(&entry.input.flow.mac_vlan_flow.mac_addr,
+		rte_memcpy(&entry.input.flow.mac_vlan_flow.mac_addr,
 				 &res->mac_addr,
 				 sizeof(struct ether_addr));
 
 	if (fdir_conf.mode ==  RTE_FDIR_MODE_PERFECT_TUNNEL) {
-		(void)rte_memcpy(&entry.input.flow.tunnel_flow.mac_addr,
+		rte_memcpy(&entry.input.flow.tunnel_flow.mac_addr,
 				 &res->mac_addr,
 				 sizeof(struct ether_addr));
 		entry.input.flow.tunnel_flow.tunnel_type =
@@ -9158,7 +9158,7 @@ cmd_flow_director_filter_parsed(void *parsed_result,
 			rte_cpu_to_be_32(res->tunnel_id_value);
 	}
 
-	(void)rte_memcpy(entry.input.flow_ext.flexbytes,
+	rte_memcpy(entry.input.flow_ext.flexbytes,
 		   flexbytes,
 		   RTE_ETH_FDIR_MAX_FLEXLEN);
 
@@ -9856,7 +9856,7 @@ cmd_flow_director_flex_mask_parsed(void *parsed_result,
 			memset(&port->dev_conf.fdir_conf.flex_conf.flex_mask[i],
 			       0, sizeof(struct rte_eth_fdir_flex_mask));
 		port->dev_conf.fdir_conf.flex_conf.nb_flexmasks = 1;
-		(void)rte_memcpy(&port->dev_conf.fdir_conf.flex_conf.flex_mask[0],
+		rte_memcpy(&port->dev_conf.fdir_conf.flex_conf.flex_mask[0],
 				 &flex_mask,
 				 sizeof(struct rte_eth_fdir_flex_mask));
 		cmd_reconfig_device_queue(res->port_id, 1, 1);
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 3ae3e1cd8bc9..ca83eef99cb1 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -3004,7 +3004,7 @@ fdir_set_flex_mask(portid_t port_id, struct rte_eth_fdir_flex_mask *cfg)
 			return;
 		}
 	}
-	(void)rte_memcpy(&flex_conf->flex_mask[idx],
+	rte_memcpy(&flex_conf->flex_mask[idx],
 			 cfg,
 			 sizeof(struct rte_eth_fdir_flex_mask));
 }
@@ -3034,7 +3034,7 @@ fdir_set_flex_payload(portid_t port_id, struct rte_eth_flex_payload_cfg *cfg)
 			return;
 		}
 	}
-	(void)rte_memcpy(&flex_conf->flex_set[idx],
+	rte_memcpy(&flex_conf->flex_set[idx],
 			 cfg,
 			 sizeof(struct rte_eth_flex_payload_cfg));
 
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 7d40139416c5..0af34473af3a 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2173,7 +2173,7 @@ init_port_dcb_config(portid_t pid,
 	 * Set the numbers of RX & TX queues to 0, so
 	 * the RX & TX queues will not be setup.
 	 */
-	(void)rte_eth_dev_configure(pid, 0, 0, &port_conf);
+	rte_eth_dev_configure(pid, 0, 0, &port_conf);
 
 	rte_eth_dev_info_get(pid, &rte_port->dev_info);
 
-- 
2.11.0

  reply	other threads:[~2017-08-23 15:44 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-23 15:44 [dpdk-dev] [PATCH 0/6] remove unncessary void cast Stephen Hemminger
2017-08-23 15:44 ` Stephen Hemminger [this message]
2017-09-04 11:39   ` [dpdk-dev] [PATCH 1/6] testpmd: remove unnecessary void casts Rybalchenko, Kirill
2017-09-07  8:36   ` Wu, Jingjing
2017-09-11 12:44   ` Ferruh Yigit
2017-08-23 15:44 ` [dpdk-dev] [PATCH 2/6] bnx2x: remove unnecssary void cast of rte_memcpy Stephen Hemminger
2017-09-04 11:50   ` Rybalchenko, Kirill
2017-08-23 15:44 ` [dpdk-dev] [PATCH 3/6] sfc: remove unnecessary " Stephen Hemminger
2017-09-04 12:39   ` Rybalchenko, Kirill
2017-08-23 15:44 ` [dpdk-dev] [PATCH 4/6] e1000: " Stephen Hemminger
2017-09-04 12:40   ` Rybalchenko, Kirill
2017-08-23 15:44 ` [dpdk-dev] [PATCH 5/6] i40e: " Stephen Hemminger
2017-09-04 12:45   ` Rybalchenko, Kirill
2017-09-09  3:24   ` Wu, Jingjing
2017-08-23 15:44 ` [dpdk-dev] [PATCH 6/6] ixgbe: " Stephen Hemminger
2017-09-04 12:49   ` Rybalchenko, Kirill
2017-09-11 12:44 ` [dpdk-dev] [PATCH 0/6] remove unncessary void cast Ferruh Yigit
2017-09-11 13:32   ` Ferruh Yigit
2017-09-11 13:00 ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170823154445.19494-2-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).