From: Zhiyong Yang <zhiyong.yang@intel.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, thomas@monjalon.net
Subject: [dpdk-dev] [PATCH v6 0/5] increase port_id range
Date: Fri, 29 Sep 2017 15:17:22 +0800 [thread overview]
Message-ID: <20170929071727.21618-1-zhiyong.yang@intel.com> (raw)
In-Reply-To: <20170925032231.72897-1-zhiyong.yang@intel.com>
port_id is currently defined as uint8_t, which is limited to the range
0 to 255. A larger range is required for vdev scalability.
It is necessary for a redefinition of port_id to extend it from
1 bytes to 2 bytes. All ethdev APIs and usages related to port_id will
be changed at the same time.
Discussion about port_id is the following thread.
http://www.dpdk.org/dev/patchwork/patch/23208/
Changes in V2:
1. cover more PMDs to increase port_id range.
2. cover more examples to increase port_id range.
3. add 17.11 release note.
Changes in V3:
1. cover mlx4 and mlx5.
2. add to increase port_id range in test code.
3. The patch "librte_mbuf: modify port initialization value" is merged
into the patchset.
Changes in V4:
1. Add a patch to remove bonding APIs using ABI versioning according to
Ferruh's comments.
2. Unify to use typedef portid_t in testpmd code.
3. update release note deprecation doc in 2/5
4. fix some issues according to comments.
Changes in V5:
1. For 1/5, bond_mode_8023ad_conf_get_v1708() and bond_mode_8023ad_conf
_get() are merged into one function bond_mode_8023ad_conf_get.
Changes in V6:
1. For 2/5, remove the unnecessary LIBABIVER in Makefile and update
the release notes "Shared Library Versions".
Note: The patchset have dependency on the following patch.
http://www.dpdk.org/dev/patchwork/patch/28738/
http://www.dpdk.org/dev/patchwork/patch/29219/
Note: 3/5 and 4/5 patches' building depends on 2/5 patch since 2/5 patch
breaks lib/PMD API/ABI.
Zhiyong Yang (5):
net/bonding: remove bonding APIs using ABI versioning
ethdev: increase port_id range
examples: increase port_id range
test: increase port_id range
librte_mbuf: modify port initialization value
app/pdump/main.c | 2 +-
app/test-pmd/cmdline.c | 6 +-
app/test-pmd/config.c | 4 +-
app/test-pmd/ieee1588fwd.c | 26 +--
app/test-pmd/parameters.c | 2 +-
app/test-pmd/rxonly.c | 2 +-
app/test-pmd/testpmd.c | 18 +-
app/test-pmd/testpmd.h | 4 +-
doc/guides/rel_notes/deprecation.rst | 6 -
doc/guides/rel_notes/release_17_11.rst | 24 +-
drivers/net/af_packet/rte_eth_af_packet.c | 2 +-
drivers/net/ark/ark_ethdev.c | 2 +-
drivers/net/avp/avp_ethdev.c | 2 +-
drivers/net/bnx2x/bnx2x_rxtx.h | 4 +-
drivers/net/bnxt/Makefile | 2 +-
drivers/net/bnxt/bnxt.h | 2 +-
drivers/net/bnxt/bnxt_ethdev.c | 4 +-
drivers/net/bnxt/bnxt_rxq.h | 2 +-
drivers/net/bnxt/bnxt_txq.h | 2 +-
drivers/net/bnxt/rte_pmd_bnxt.c | 32 +--
drivers/net/bnxt/rte_pmd_bnxt.h | 32 +--
drivers/net/bonding/Makefile | 2 +-
drivers/net/bonding/rte_eth_bond.h | 41 ++--
drivers/net/bonding/rte_eth_bond_8023ad.c | 203 +++--------------
drivers/net/bonding/rte_eth_bond_8023ad.h | 48 ++--
drivers/net/bonding/rte_eth_bond_8023ad_private.h | 12 +-
drivers/net/bonding/rte_eth_bond_alb.c | 6 +-
drivers/net/bonding/rte_eth_bond_alb.h | 6 +-
drivers/net/bonding/rte_eth_bond_api.c | 64 +++---
drivers/net/bonding/rte_eth_bond_args.c | 2 +-
drivers/net/bonding/rte_eth_bond_pmd.c | 62 +++---
drivers/net/bonding/rte_eth_bond_private.h | 45 ++--
drivers/net/bonding/rte_eth_bond_version.map | 4 -
drivers/net/e1000/em_ethdev.c | 2 +-
drivers/net/e1000/em_rxtx.c | 4 +-
drivers/net/e1000/igb_rxtx.c | 4 +-
drivers/net/failsafe/failsafe_ether.c | 4 +-
drivers/net/failsafe/failsafe_private.h | 4 +-
drivers/net/fm10k/fm10k.h | 6 +-
drivers/net/i40e/Makefile | 2 +-
drivers/net/i40e/i40e_ethdev.c | 5 +-
drivers/net/i40e/i40e_rxtx.h | 4 +-
drivers/net/i40e/rte_pmd_i40e.c | 50 ++---
drivers/net/i40e/rte_pmd_i40e.h | 48 ++--
drivers/net/ixgbe/Makefile | 2 +-
drivers/net/ixgbe/ixgbe_ethdev.c | 5 +-
drivers/net/ixgbe/ixgbe_rxtx.h | 4 +-
drivers/net/ixgbe/rte_pmd_ixgbe.c | 60 ++---
drivers/net/ixgbe/rte_pmd_ixgbe.h | 64 +++---
drivers/net/mlx5/mlx5_rxtx.h | 4 +-
drivers/net/nfp/nfp_net.c | 16 +-
drivers/net/nfp/nfp_net_pmd.h | 2 +-
drivers/net/null/rte_eth_null.c | 2 +-
drivers/net/pcap/rte_eth_pcap.c | 2 +-
drivers/net/qede/qede_if.h | 2 +-
drivers/net/ring/rte_eth_ring.c | 2 +-
drivers/net/szedata2/rte_eth_szedata2.c | 2 +-
drivers/net/thunderx/nicvf_struct.h | 2 +-
drivers/net/vhost/Makefile | 2 +-
drivers/net/vhost/rte_eth_vhost.c | 6 +-
drivers/net/vhost/rte_eth_vhost.h | 4 +-
drivers/net/virtio/virtio_pci.h | 2 +-
drivers/net/virtio/virtio_rxtx.h | 6 +-
drivers/net/vmxnet3/vmxnet3_ring.h | 4 +-
examples/bond/main.c | 16 +-
examples/distributor/main.c | 26 +--
examples/exception_path/main.c | 35 ++-
examples/ip_fragmentation/main.c | 33 +--
examples/ip_pipeline/init.c | 4 +-
examples/ip_reassembly/main.c | 34 +--
examples/ipv4_multicast/main.c | 30 +--
examples/kni/main.c | 30 +--
examples/l2fwd-cat/l2fwd-cat.c | 12 +-
examples/l2fwd-jobstats/main.c | 34 +--
examples/l2fwd-keepalive/main.c | 50 ++---
examples/l2fwd/main.c | 47 ++--
examples/l3fwd-acl/main.c | 9 +-
examples/l3fwd-power/main.c | 60 ++---
examples/l3fwd-vf/main.c | 50 +++--
examples/l3fwd/l3fwd.h | 10 +-
examples/l3fwd/l3fwd_common.h | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_em.h | 6 +-
examples/l3fwd/l3fwd_em_hlm.h | 14 +-
examples/l3fwd/l3fwd_lpm.c | 15 +-
examples/l3fwd/l3fwd_lpm.h | 4 +-
examples/l3fwd/l3fwd_lpm_neon.h | 4 +-
examples/l3fwd/l3fwd_lpm_sse.h | 4 +-
examples/l3fwd/main.c | 30 +--
examples/link_status_interrupt/main.c | 9 +-
examples/load_balancer/config.c | 14 +-
examples/load_balancer/init.c | 34 ++-
examples/load_balancer/main.h | 11 +-
examples/load_balancer/runtime.c | 12 +-
.../client_server_mp/mp_client/client.c | 17 +-
.../client_server_mp/mp_server/args.c | 4 +-
.../client_server_mp/mp_server/args.h | 2 +-
.../client_server_mp/mp_server/init.c | 11 +-
.../client_server_mp/mp_server/main.c | 2 +-
.../multi_process/client_server_mp/shared/common.h | 4 +-
examples/multi_process/l2fwd_fork/main.c | 23 +-
examples/netmap_compat/lib/compat_netmap.c | 52 +++--
examples/netmap_compat/lib/compat_netmap.h | 2 +-
examples/packet_ordering/main.c | 19 +-
examples/performance-thread/l3fwd-thread/main.c | 143 ++++++------
examples/ptpclient/ptpclient.c | 4 +-
examples/qos_sched/args.c | 12 +-
examples/qos_sched/init.c | 31 +--
examples/qos_sched/main.c | 14 +-
examples/qos_sched/main.h | 24 +-
examples/qos_sched/stats.c | 16 +-
examples/quota_watermark/qw/init.c | 4 +-
examples/quota_watermark/qw/main.c | 10 +-
examples/rxtx_callbacks/main.c | 8 +-
examples/server_node_efd/server/main.c | 2 +-
examples/server_node_efd/shared/common.h | 4 +-
examples/skeleton/basicfwd.c | 12 +-
examples/vhost/main.c | 10 +-
lib/librte_bitratestats/Makefile | 2 +-
lib/librte_bitratestats/rte_bitrate.c | 2 +-
lib/librte_bitratestats/rte_bitrate.h | 2 +-
lib/librte_ether/Makefile | 2 +-
lib/librte_ether/rte_ethdev.c | 241 +++++++++++----------
lib/librte_ether/rte_ethdev.h | 238 ++++++++++----------
lib/librte_ether/rte_flow.c | 2 +-
lib/librte_ether/rte_flow_driver.h | 2 +-
lib/librte_ether/rte_tm.c | 62 +++---
lib/librte_ether/rte_tm.h | 60 ++---
lib/librte_ether/rte_tm_driver.h | 2 +-
lib/librte_kni/rte_kni.h | 6 +-
lib/librte_latencystats/rte_latencystats.c | 12 +-
lib/librte_mbuf/rte_mbuf.c | 2 +-
lib/librte_mbuf/rte_mbuf.h | 4 +-
lib/librte_pdump/Makefile | 2 +-
lib/librte_pdump/rte_pdump.c | 16 +-
lib/librte_pdump/rte_pdump.h | 4 +-
lib/librte_port/rte_port_ethdev.c | 6 +-
lib/librte_port/rte_port_ethdev.h | 6 +-
test/test/test_kni.c | 12 +-
test/test/test_link_bonding.c | 40 ++--
test/test/test_link_bonding_mode4.c | 12 +-
test/test/test_pmd_perf.c | 30 +--
test/test/test_pmd_ring_perf.c | 2 +-
test/test/virtual_pmd.c | 24 +-
test/test/virtual_pmd.h | 28 +--
145 files changed, 1394 insertions(+), 1499 deletions(-)
--
2.13.3
next prev parent reply other threads:[~2017-09-29 7:17 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-09 8:42 [dpdk-dev] [PATCH 0/2] " Zhiyong Yang
2017-08-09 8:42 ` [dpdk-dev] [PATCH 1/2] ethdev: " Zhiyong Yang
2017-08-09 12:52 ` Ferruh Yigit
2017-08-09 12:57 ` Wiles, Keith
2017-08-10 0:53 ` Yang, Zhiyong
2017-08-10 0:51 ` Yang, Zhiyong
2017-08-09 8:42 ` [dpdk-dev] [PATCH 2/2] examples: " Zhiyong Yang
2017-08-09 14:48 ` Stephen Hemminger
2017-08-10 1:03 ` Yang, Zhiyong
2017-08-09 9:00 ` [dpdk-dev] [PATCH 0/2] " De Lara Guarch, Pablo
2017-08-09 9:17 ` Yang, Zhiyong
2017-09-04 5:57 ` [dpdk-dev] [PATCH v2 0/4] " Zhiyong Yang
2017-09-04 5:57 ` [dpdk-dev] [PATCH v2 1/4] ethdev: " Zhiyong Yang
2017-09-04 9:06 ` Bruce Richardson
2017-09-04 9:29 ` Ferruh Yigit
2017-09-04 9:47 ` Yang, Zhiyong
2017-09-04 13:12 ` Adrien Mazarguil
2017-09-04 13:17 ` Richardson, Bruce
2017-09-04 13:36 ` Adrien Mazarguil
2017-09-04 13:59 ` Yang, Zhiyong
2017-09-04 14:41 ` Adrien Mazarguil
2017-09-05 6:51 ` Yang, Zhiyong
2017-09-06 8:32 ` Hemant Agrawal
2017-09-06 8:48 ` Yang, Zhiyong
[not found] ` <CALZ3Guikt9x8sz-oEKCuDCSp_wtKa64bSXTrMhqcWyg7f_dS7g@mail.gmail.com>
2017-09-07 0:45 ` Yang, Zhiyong
2017-09-04 5:57 ` [dpdk-dev] [PATCH v2 2/4] examples: " Zhiyong Yang
2017-09-04 14:15 ` Hunt, David
2017-09-04 15:01 ` Yang, Zhiyong
2017-09-04 5:57 ` [dpdk-dev] [PATCH v2 3/4] common_base: extend RTE_MAX_ETHPORTS from 32 to 1024 Zhiyong Yang
2017-09-04 7:46 ` Yao, Lei A
2017-09-04 7:59 ` Yang, Zhiyong
2017-09-04 9:09 ` Bruce Richardson
2017-09-04 10:05 ` Yang, Zhiyong
2017-09-04 10:27 ` Ananyev, Konstantin
2017-09-04 14:18 ` Yang, Zhiyong
2017-09-06 8:42 ` Hemant Agrawal
2017-09-06 8:52 ` Yang, Zhiyong
2017-09-04 10:29 ` Bruce Richardson
2017-09-04 9:27 ` Ananyev, Konstantin
2017-09-04 5:57 ` [dpdk-dev] [PATCH v2 4/4] testpmd: add flexibility to mbuf allocation Zhiyong Yang
2017-09-09 14:47 ` [dpdk-dev] [PATCH v3 0/4] increase port_id range Zhiyong Yang
2017-09-09 14:47 ` [dpdk-dev] [PATCH v3 1/4] ethdev: " Zhiyong Yang
2017-09-11 9:37 ` Adrien Mazarguil
2017-09-11 10:51 ` Yang, Zhiyong
2017-09-11 10:21 ` Ferruh Yigit
2017-09-13 2:26 ` Yang, Zhiyong
2017-09-13 11:56 ` Ferruh Yigit
2017-09-13 12:15 ` Yang, Zhiyong
2017-09-13 12:18 ` Thomas Monjalon
2017-09-13 13:33 ` Ferruh Yigit
2017-09-19 6:05 ` Yang, Zhiyong
2017-09-19 12:30 ` Wiles, Keith
2017-09-14 12:49 ` Ferruh Yigit
2017-09-15 5:11 ` Yang, Zhiyong
2017-09-09 14:47 ` [dpdk-dev] [PATCH v3 2/4] test: " Zhiyong Yang
2017-09-09 14:47 ` [dpdk-dev] [PATCH v3 3/4] examples: " Zhiyong Yang
2017-09-14 14:41 ` Ferruh Yigit
2017-09-09 14:47 ` [dpdk-dev] [PATCH v3 4/4] librte_mbuf: modify port initialization value Zhiyong Yang
2017-09-11 10:23 ` [dpdk-dev] [PATCH v3 0/4] increase port_id range Ferruh Yigit
2017-09-11 11:25 ` Yang, Zhiyong
2017-09-13 8:14 ` Matej Vido
2017-09-13 8:21 ` Yang, Zhiyong
2017-09-18 14:54 ` Laatz, Kevin
2017-09-19 1:39 ` Yang, Zhiyong
2017-09-11 10:26 ` Ferruh Yigit
2017-09-11 10:55 ` Yang, Zhiyong
2017-09-11 11:24 ` Ferruh Yigit
2017-09-21 8:32 ` [dpdk-dev] [PATCH v4 0/5] " Zhiyong Yang
2017-09-21 8:32 ` [dpdk-dev] [PATCH v4 1/5] net/bonding: remove bonding APIs using ABI versioning Zhiyong Yang
2017-09-21 10:36 ` Ferruh Yigit
2017-09-22 2:02 ` Yang, Zhiyong
2017-09-21 8:32 ` [dpdk-dev] [PATCH v4 2/5] ethdev: increase port_id range Zhiyong Yang
2017-09-21 11:49 ` Adrien Mazarguil
2017-10-06 14:34 ` Nélio Laranjeiro
2017-09-21 8:32 ` [dpdk-dev] [PATCH v4 3/5] examples: " Zhiyong Yang
2017-09-21 8:32 ` [dpdk-dev] [PATCH v4 4/5] test: " Zhiyong Yang
2017-09-21 8:32 ` [dpdk-dev] [PATCH v4 5/5] librte_mbuf: modify port initialization value Zhiyong Yang
2017-09-25 3:22 ` [dpdk-dev] [PATCH v5 0/5] increase port_id range Zhiyong Yang
2017-09-25 3:22 ` [dpdk-dev] [PATCH v5 1/5] net/bonding: remove bonding APIs using ABI versioning Zhiyong Yang
2017-09-25 11:34 ` Ferruh Yigit
2017-09-25 3:22 ` [dpdk-dev] [PATCH v5 2/5] ethdev: increase port_id range Zhiyong Yang
2017-09-25 11:37 ` Ferruh Yigit
2017-09-25 12:06 ` Ferruh Yigit
2017-09-26 7:01 ` Yang, Zhiyong
2017-09-27 18:44 ` Ferruh Yigit
2017-09-28 2:12 ` Yang, Zhiyong
2017-09-25 3:22 ` [dpdk-dev] [PATCH v5 3/5] examples: " Zhiyong Yang
2017-09-25 3:22 ` [dpdk-dev] [PATCH v5 4/5] test: " Zhiyong Yang
2017-09-25 3:22 ` [dpdk-dev] [PATCH v5 5/5] librte_mbuf: modify port initialization value Zhiyong Yang
2017-09-29 7:17 ` Zhiyong Yang [this message]
2017-09-29 7:17 ` [dpdk-dev] [PATCH v6 1/5] net/bonding: remove bonding APIs using ABI versioning Zhiyong Yang
2017-09-29 7:17 ` [dpdk-dev] [PATCH v6 2/5] ethdev: increase port_id range Zhiyong Yang
2017-09-29 7:17 ` [dpdk-dev] [PATCH v6 3/5] examples: " Zhiyong Yang
2017-09-29 7:17 ` [dpdk-dev] [PATCH v6 4/5] test: " Zhiyong Yang
2017-09-29 7:17 ` [dpdk-dev] [PATCH v6 5/5] librte_mbuf: modify port initialization value Zhiyong Yang
2017-10-06 2:15 ` [dpdk-dev] [PATCH v6 0/5] increase port_id range Ferruh Yigit
2017-10-06 13:31 ` Gaëtan Rivet
2017-10-06 14:29 ` Thomas Monjalon
2017-10-06 16:02 ` Thomas Monjalon
2017-10-11 21:21 ` Ferruh Yigit
2017-10-12 1:33 ` Yang, Zhiyong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170929071727.21618-1-zhiyong.yang@intel.com \
--to=zhiyong.yang@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).