DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value
@ 2017-10-31  9:44 Zhiyong Yang
  2017-11-01 15:40 ` Yuanhan Liu
                   ` (2 more replies)
  0 siblings, 3 replies; 21+ messages in thread
From: Zhiyong Yang @ 2017-10-31  9:44 UTC (permalink / raw)
  To: dev; +Cc: yliu, maxime.coquelin, Zhiyong Yang

When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is indeed not valid.
Come back to l3fwd-power, use_msix is not assigned to the right
value "1". The patch fixes the issue.

Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
---
 drivers/net/virtio/virtio_pci.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..be5b07a58 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -580,8 +580,6 @@ get_cfg_addr(struct rte_pci_device *dev, struct virtio_pci_cap *cap)
 	return base + offset;
 }
 
-#define PCI_MSIX_ENABLE 0x8000
-
 static int
 virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
 {
@@ -609,14 +607,7 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
 		}
 
 		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
-			/* Transitional devices would also have this capability,
-			 * that's why we also check if msix is enabled.
-			 * 1st byte is cap ID; 2nd byte is the position of next
-			 * cap; next two bytes are the flags.
-			 */
-			uint16_t flags = ((uint16_t *)&cap)[1];
-
-			if (flags & PCI_MSIX_ENABLE)
+			if (dev->intr_handle.type == RTE_INTR_HANDLE_VFIO_MSIX)
 				hw->use_msix = 1;
 		}
 
-- 
2.13.3

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value
  2017-10-31  9:44 [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value Zhiyong Yang
@ 2017-11-01 15:40 ` Yuanhan Liu
  2017-11-02  1:46   ` Yang, Zhiyong
  2017-11-02  3:36 ` Tan, Jianfeng
  2017-11-08 11:03 ` [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
  2 siblings, 1 reply; 21+ messages in thread
From: Yuanhan Liu @ 2017-11-01 15:40 UTC (permalink / raw)
  To: Zhiyong Yang; +Cc: dev, maxime.coquelin, Tan, Jianfeng

On Tue, Oct 31, 2017 at 05:44:56PM +0800, Zhiyong Yang wrote:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails.

What errors have you met?

> In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is indeed not valid.
> Come back to l3fwd-power, use_msix is not assigned to the right
> value "1". The patch fixes the issue.

Jianfeng, could you review it? You are the last author changed the code.
Will it break your case?

	--yliu

> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> ---
>  drivers/net/virtio/virtio_pci.c | 11 +----------
>  1 file changed, 1 insertion(+), 10 deletions(-)
> 
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..be5b07a58 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -580,8 +580,6 @@ get_cfg_addr(struct rte_pci_device *dev, struct virtio_pci_cap *cap)
>  	return base + offset;
>  }
>  
> -#define PCI_MSIX_ENABLE 0x8000
> -
>  static int
>  virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
>  {
> @@ -609,14 +607,7 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
>  		}
>  
>  		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> -			/* Transitional devices would also have this capability,
> -			 * that's why we also check if msix is enabled.
> -			 * 1st byte is cap ID; 2nd byte is the position of next
> -			 * cap; next two bytes are the flags.
> -			 */
> -			uint16_t flags = ((uint16_t *)&cap)[1];
> -
> -			if (flags & PCI_MSIX_ENABLE)
> +			if (dev->intr_handle.type == RTE_INTR_HANDLE_VFIO_MSIX)
>  				hw->use_msix = 1;
>  		}
>  
> -- 
> 2.13.3

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value
  2017-11-01 15:40 ` Yuanhan Liu
@ 2017-11-02  1:46   ` Yang, Zhiyong
  0 siblings, 0 replies; 21+ messages in thread
From: Yang, Zhiyong @ 2017-11-02  1:46 UTC (permalink / raw)
  To: Yuanhan Liu; +Cc: dev, maxime.coquelin, Tan, Jianfeng

Hi Yuanhan,

> -----Original Message-----
> From: Yuanhan Liu [mailto:yliu@fridaylinux.org]
> Sent: Wednesday, November 1, 2017 11:40 PM
> To: Yang, Zhiyong <zhiyong.yang@intel.com>
> Cc: dev@dpdk.org; maxime.coquelin@redhat.com; Tan, Jianfeng
> <jianfeng.tan@intel.com>
> Subject: Re: [PATCH] net/virtio: fix use_msix get the wrong value
> 
> On Tue, Oct 31, 2017 at 05:44:56PM +0800, Zhiyong Yang wrote:
> > When running l3fwd-power to test virtio rxq interrupt using vfio pci
> > noiommu mode, startup fails.
> 
> What errors have you met?
> 

EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable clock cycles !
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL:   Invalid NUMA socket, default to 0
EAL:   probe driver: 1af4:1000 net_virtio
EAL:   using IOMMU type 8 (No-IOMMU)
EAL: Ignore mapping IO port bar(0)
Promiscuous mode selected
numa is disabled 
soft parse-ptype is enabled
Initializing port 0 ... EAL: Error - exiting with code: 1
  Cause: Cannot configure not existed rxq: port=0

Thanks
Zhiyong

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value
  2017-10-31  9:44 [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value Zhiyong Yang
  2017-11-01 15:40 ` Yuanhan Liu
@ 2017-11-02  3:36 ` Tan, Jianfeng
  2017-11-08 11:03 ` [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
  2 siblings, 0 replies; 21+ messages in thread
From: Tan, Jianfeng @ 2017-11-02  3:36 UTC (permalink / raw)
  To: Zhiyong Yang, dev; +Cc: yliu, maxime.coquelin



On 10/31/2017 5:44 PM, Zhiyong Yang wrote:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is indeed not valid.
> Come back to l3fwd-power, use_msix is not assigned to the right
> value "1". The patch fixes the issue.
>
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> ---
>   drivers/net/virtio/virtio_pci.c | 11 +----------
>   1 file changed, 1 insertion(+), 10 deletions(-)
>
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..be5b07a58 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -580,8 +580,6 @@ get_cfg_addr(struct rte_pci_device *dev, struct virtio_pci_cap *cap)
>   	return base + offset;
>   }
>   
> -#define PCI_MSIX_ENABLE 0x8000
> -
>   static int
>   virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
>   {
> @@ -609,14 +607,7 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
>   		}
>   
>   		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> -			/* Transitional devices would also have this capability,
> -			 * that's why we also check if msix is enabled.
> -			 * 1st byte is cap ID; 2nd byte is the position of next
> -			 * cap; next two bytes are the flags.
> -			 */
> -			uint16_t flags = ((uint16_t *)&cap)[1];
> -
> -			if (flags & PCI_MSIX_ENABLE)
> +			if (dev->intr_handle.type == RTE_INTR_HANDLE_VFIO_MSIX)
>   				hw->use_msix = 1;
>   		}
>   

The real issue is that, if vfio (noiommu) is used, msix enable 
(rte_intr_enable) is after the msix detection. IMO, we shall try to move 
msix enable ahead for virtio.
- igb_uio do that in the open().
- uio_pci_generic does not.
- vfio-pci does not.

For previous fix on mmio position adjustment, we might need to change to 
ask if msix is enabled each time.

Thanks,
Jianfeng

^ permalink raw reply	[flat|nested] 21+ messages in thread

* [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
  2017-10-31  9:44 [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value Zhiyong Yang
  2017-11-01 15:40 ` Yuanhan Liu
  2017-11-02  3:36 ` Tan, Jianfeng
@ 2017-11-08 11:03 ` Zhiyong Yang
  2017-11-08 13:52   ` Tan, Jianfeng
  2017-11-09  3:18   ` [dpdk-dev] [PATCH v3] " Zhiyong Yang
  2 siblings, 2 replies; 21+ messages in thread
From: Zhiyong Yang @ 2017-11-08 11:03 UTC (permalink / raw)
  To: dev; +Cc: yliu, maxime.coquelin, jianfeng.tan, Zhiyong Yang

When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
stage. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function vtpci_msix_detect to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix. Only
support and enable msix can assign "1" to use_msix.

Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
---
 drivers/net/virtio/virtio_ethdev.c | 64 +++++++++++++++++++++++++++++++++-----
 drivers/net/virtio/virtio_pci.c    | 42 +++++++++++++++++++++++++
 drivers/net/virtio/virtio_pci.h    |  5 +++
 3 files changed, 104 insertions(+), 7 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..525cfa06c 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
 static void virtio_mac_addr_set(struct rte_eth_dev *dev,
 				struct ether_addr *mac_addr);
 
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
 static int virtio_dev_queue_stats_mapping_set(
 	struct rte_eth_dev *eth_dev,
 	uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
 		virtio_queues_unbind_intr(dev);
 
 	if (intr_conf->lsc || intr_conf->rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 		rte_intr_efd_disable(dev->intr_handle);
 		rte_free(dev->intr_handle->intr_vec);
 		dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,44 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 }
 
 static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+	int msix_detect;
+
+	if (rte_intr_enable(dev->intr_handle) < 0)
+		return -1;
+
+	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+	if (msix_detect < 0)
+		return -1;
+	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
+		hw->use_msix = 1;
+	else
+		hw->use_msix = 0;
+	return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+	int msix_detect;
+
+	if (rte_intr_disable(dev->intr_handle) < 0)
+		return -1;
+
+	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+	if (msix_detect < 0)
+		return -1;
+	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
+		hw->use_msix = 1;
+	else
+		hw->use_msix = 0;
+	return 0;
+}
+
+static int
 virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
 {
 	uint64_t host_features;
@@ -1228,7 +1269,7 @@ virtio_interrupt_handler(void *param)
 	isr = vtpci_isr(hw);
 	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
 
-	if (rte_intr_enable(dev->intr_handle) < 0)
+	if (virtio_intr_enable(dev) < 0)
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 
 	if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1389,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
 	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
 	 * (22) will be ignored.
 	 */
-	if (rte_intr_enable(dev->intr_handle) < 0) {
+	if (virtio_intr_enable(dev) < 0) {
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 		return -1;
 	}
@@ -1370,7 +1411,15 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 	struct virtio_net_config local_config;
 	struct rte_pci_device *pci_dev = NULL;
 	int ret;
+	int msix_detect;
 
+	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(eth_dev));
+	if (msix_detect < 0)
+		return -1;
+	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
+		hw->use_msix = 1;
+	else
+		hw->use_msix = 0;
 	/* Reset the device although not necessary at startup */
 	vtpci_reset(hw);
 
@@ -1388,7 +1437,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 	}
 
 	/* If host does not support both status and MSI-X then disable LSC */
-	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+	    (msix_detect >= SUPPORT_MSIX_STATUS_DISABLED))
 		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
 	else
 		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1851,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
 	 */
 	if (dev->data->dev_conf.intr_conf.lsc ||
 	    dev->data->dev_conf.intr_conf.rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
-		if (rte_intr_enable(dev->intr_handle) < 0) {
+		if (virtio_intr_enable(dev) < 0) {
 			PMD_DRV_LOG(ERR, "interrupt enable failed");
 			return -EIO;
 		}
@@ -1912,7 +1962,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
 	PMD_INIT_LOG(DEBUG, "stop");
 
 	if (intr_conf->lsc || intr_conf->rxq)
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
 	hw->started = 0;
 	memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..a73b41765 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -710,3 +710,45 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
 
 	return 0;
 }
+
+/* Return -1 fails to detect msix.
+ * Return 0 (NO_SUPPORT_MSIX) don't support msix.
+ * Return 1 (SUPPORT_MSIX_STATUS_DISABLED) support msix, status: disabled.
+ * Return 2 (SUPPORT_MSIX_STATUS_ENABLED) sppport msix, status: enabled.
+ */
+
+int
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+	uint8_t pos;
+	struct virtio_pci_cap cap;
+	int ret;
+
+	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+	if (ret < 0) {
+		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+		return -1;
+	}
+
+	while (pos) {
+		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+		if (ret < 0) {
+			PMD_INIT_LOG(ERR,
+				"failed to read pci cap at pos: %x", pos);
+			break;
+		}
+
+		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+			uint16_t flags = ((uint16_t *)&cap)[1];
+
+			if (flags & PCI_MSIX_ENABLE)
+				return SUPPORT_MSIX_STATUS_ENABLED;
+			else
+				return SUPPORT_MSIX_STATUS_DISABLED;
+		}
+
+		pos = cap.cap_next;
+	}
+
+	return NO_SUPPORT_MSIX;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..401afc7f9 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,10 @@ struct virtio_net_config {
 /* The alignment to use between consumer and producer parts of vring. */
 #define VIRTIO_PCI_VRING_ALIGN 4096
 
+#define NO_SUPPORT_MSIX 0
+#define SUPPORT_MSIX_STATUS_DISABLED 1
+#define SUPPORT_MSIX_STATUS_ENABLED 2
+
 static inline int
 vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
 {
@@ -325,6 +329,7 @@ vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
  */
 int vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw);
 void vtpci_reset(struct virtio_hw *);
+int vtpci_msix_detect(struct rte_pci_device *dev);
 
 void vtpci_reinit_complete(struct virtio_hw *);
 
-- 
2.13.3

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-08 11:03 ` [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
@ 2017-11-08 13:52   ` Tan, Jianfeng
  2017-11-09  1:28     ` Yang, Zhiyong
  2017-11-09  2:11     ` Yang, Zhiyong
  2017-11-09  3:18   ` [dpdk-dev] [PATCH v3] " Zhiyong Yang
  1 sibling, 2 replies; 21+ messages in thread
From: Tan, Jianfeng @ 2017-11-08 13:52 UTC (permalink / raw)
  To: Zhiyong Yang, dev; +Cc: yliu, maxime.coquelin


Hi Zhiyong,


On 11/8/2017 7:03 PM, Zhiyong Yang wrote:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> stage. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function vtpci_msix_detect to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix. Only
> support and enable msix can assign "1" to use_msix.

Should be "2". Better to use macro here.

>
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> ---
>   drivers/net/virtio/virtio_ethdev.c | 64 +++++++++++++++++++++++++++++++++-----
>   drivers/net/virtio/virtio_pci.c    | 42 +++++++++++++++++++++++++
>   drivers/net/virtio/virtio_pci.h    |  5 +++
>   3 files changed, 104 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index d2576d5e0..525cfa06c 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
>   static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>   				struct ether_addr *mac_addr);
>   
> +static int virtio_intr_enable(struct rte_eth_dev *dev);
> +static int virtio_intr_disable(struct rte_eth_dev *dev);
> +
>   static int virtio_dev_queue_stats_mapping_set(
>   	struct rte_eth_dev *eth_dev,
>   	uint16_t queue_id,
> @@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
>   		virtio_queues_unbind_intr(dev);
>   
>   	if (intr_conf->lsc || intr_conf->rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   		rte_intr_efd_disable(dev->intr_handle);
>   		rte_free(dev->intr_handle->intr_vec);
>   		dev->intr_handle->intr_vec = NULL;
> @@ -1160,6 +1163,44 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
>   }
>   
>   static int
> +virtio_intr_enable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +	int msix_detect;

As I don't think we need to return a value except 0, 1, 2 as my comment 
at the end, so I suppose we just:

     hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));

> +
> +	if (rte_intr_enable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));

This breaks virtio_user. Need to add a check before this line.

> +	if (msix_detect < 0)
> +		return -1;
> +	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
> +		hw->use_msix = 1;
> +	else
> +		hw->use_msix = 0;
> +	return 0;
> +}
> +
> +static int
> +virtio_intr_disable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +	int msix_detect;
> +
> +	if (rte_intr_disable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));

Ditto.

> +	if (msix_detect < 0)
> +		return -1;
> +	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
> +		hw->use_msix = 1;
> +	else
> +		hw->use_msix = 0;
> +	return 0;
> +}
> +
> +static int
>   virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
>   {
>   	uint64_t host_features;
> @@ -1228,7 +1269,7 @@ virtio_interrupt_handler(void *param)
>   	isr = vtpci_isr(hw);
>   	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
>   
> -	if (rte_intr_enable(dev->intr_handle) < 0)
> +	if (virtio_intr_enable(dev) < 0)
>   		PMD_DRV_LOG(ERR, "interrupt enable failed");
>   
>   	if (isr & VIRTIO_PCI_ISR_CONFIG) {
> @@ -1348,7 +1389,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
>   	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
>   	 * (22) will be ignored.
>   	 */
> -	if (rte_intr_enable(dev->intr_handle) < 0) {
> +	if (virtio_intr_enable(dev) < 0) {
>   		PMD_DRV_LOG(ERR, "interrupt enable failed");
>   		return -1;
>   	}
> @@ -1370,7 +1411,15 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
>   	struct virtio_net_config local_config;
>   	struct rte_pci_device *pci_dev = NULL;
>   	int ret;
> +	int msix_detect;
>   
> +	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(eth_dev));
> +	if (msix_detect < 0)
> +		return -1;
> +	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
> +		hw->use_msix = 1;
> +	else
> +		hw->use_msix = 0;

Ditto, we directly assign return value to hw->use_msix.

>   	/* Reset the device although not necessary at startup */
>   	vtpci_reset(hw);
>   
> @@ -1388,7 +1437,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
>   	}
>   
>   	/* If host does not support both status and MSI-X then disable LSC */
> -	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
> +	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
> +	    (msix_detect >= SUPPORT_MSIX_STATUS_DISABLED))

!= should be better than >= here.

>   		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
>   	else
>   		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
> @@ -1801,9 +1851,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
>   	 */
>   	if (dev->data->dev_conf.intr_conf.lsc ||
>   	    dev->data->dev_conf.intr_conf.rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   
> -		if (rte_intr_enable(dev->intr_handle) < 0) {
> +		if (virtio_intr_enable(dev) < 0) {
>   			PMD_DRV_LOG(ERR, "interrupt enable failed");
>   			return -EIO;
>   		}
> @@ -1912,7 +1962,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
>   	PMD_INIT_LOG(DEBUG, "stop");
>   
>   	if (intr_conf->lsc || intr_conf->rxq)
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   
>   	hw->started = 0;
>   	memset(&link, 0, sizeof(link));
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..a73b41765 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -710,3 +710,45 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
>   
>   	return 0;
>   }
> +
> +/* Return -1 fails to detect msix.

I don't think we need to return -1. We can treat the error as msix not 
supported.

> + * Return 0 (NO_SUPPORT_MSIX) don't support msix.
> + * Return 1 (SUPPORT_MSIX_STATUS_DISABLED) support msix, status: disabled.
> + * Return 2 (SUPPORT_MSIX_STATUS_ENABLED) sppport msix, status: enabled.
> + */
> +
> +int
> +vtpci_msix_detect(struct rte_pci_device *dev)
> +{
> +	uint8_t pos;
> +	struct virtio_pci_cap cap;
> +	int ret;
> +
> +	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
> +	if (ret < 0) {
> +		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
> +		return -1;

I suppose we can return NO_SUPPORT_MSIX here.

> +	}
> +
> +	while (pos) {
> +		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
> +		if (ret < 0) {
> +			PMD_INIT_LOG(ERR,
> +				"failed to read pci cap at pos: %x", pos);
> +			break;
> +		}
> +
> +		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> +			uint16_t flags = ((uint16_t *)&cap)[1];
> +
> +			if (flags & PCI_MSIX_ENABLE)
> +				return SUPPORT_MSIX_STATUS_ENABLED;
> +			else
> +				return SUPPORT_MSIX_STATUS_DISABLED;
> +		}
> +
> +		pos = cap.cap_next;
> +	}
> +
> +	return NO_SUPPORT_MSIX;
> +}
> diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
> index 36d452c06..401afc7f9 100644
> --- a/drivers/net/virtio/virtio_pci.h
> +++ b/drivers/net/virtio/virtio_pci.h
> @@ -314,6 +314,10 @@ struct virtio_net_config {
>   /* The alignment to use between consumer and producer parts of vring. */
>   #define VIRTIO_PCI_VRING_ALIGN 4096
>   
> +#define NO_SUPPORT_MSIX 0
> +#define SUPPORT_MSIX_STATUS_DISABLED 1
> +#define SUPPORT_MSIX_STATUS_ENABLED 2

Maybe we refine the name as:
VIRTIO_MSIX_NONE
VIRTIO_MSIX_DISABLED
VIRTIO_MSIX_ENABLED

> +
>   static inline int
>   vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
>   {
> @@ -325,6 +329,7 @@ vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
>    */
>   int vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw);
>   void vtpci_reset(struct virtio_hw *);
> +int vtpci_msix_detect(struct rte_pci_device *dev);
>   
>   void vtpci_reinit_complete(struct virtio_hw *);
>   

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-08 13:52   ` Tan, Jianfeng
@ 2017-11-09  1:28     ` Yang, Zhiyong
  2017-11-09  2:11     ` Yang, Zhiyong
  1 sibling, 0 replies; 21+ messages in thread
From: Yang, Zhiyong @ 2017-11-09  1:28 UTC (permalink / raw)
  To: Tan, Jianfeng, dev; +Cc: yliu, maxime.coquelin

Hi Jianfeng,

Thanks for detailed reviews and comments. Next version will come soon according to your suggestions.

Thanks
Zhiyong

> -----Original Message-----
> From: Tan, Jianfeng
> Sent: Wednesday, November 8, 2017 9:53 PM
> To: Yang, Zhiyong <zhiyong.yang@intel.com>; dev@dpdk.org
> Cc: yliu@fridaylinux.org; maxime.coquelin@redhat.com
> Subject: Re: [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
> 
> 
> Hi Zhiyong,
> 
> 
> On 11/8/2017 7:03 PM, Zhiyong Yang wrote:
> > When running l3fwd-power to test virtio rxq interrupt using vfio pci
> > noiommu mode, startup fails. In the function virtio_read_caps, the
> > code if (flags & PCI_MSIX_ENABLE) intends to double check if vfio msix
> > is enabled or not. However, it is not enable at that stage. So
> > use_msix is assigned to "0", not "1", which causes the failure of
> > configuring rxq intr in l3fwd-power.
> > This patch adds the function vtpci_msix_detect to detect the status of
> > msix when interrupt changes happen.
> > In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> > rte_intr_enable/disable to enhance the ability to detect msix. Only
> > support and enable msix can assign "1" to use_msix.
> 
> Should be "2". Better to use macro here.
> 
> >
> > Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> > Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> > ---

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-08 13:52   ` Tan, Jianfeng
  2017-11-09  1:28     ` Yang, Zhiyong
@ 2017-11-09  2:11     ` Yang, Zhiyong
  2017-11-09  3:31       ` Tan, Jianfeng
  1 sibling, 1 reply; 21+ messages in thread
From: Yang, Zhiyong @ 2017-11-09  2:11 UTC (permalink / raw)
  To: Tan, Jianfeng, dev; +Cc: yliu, maxime.coquelin

Hi Jianfeng,

> -----Original Message-----
> From: Tan, Jianfeng
> Sent: Wednesday, November 8, 2017 9:53 PM
> To: Yang, Zhiyong <zhiyong.yang@intel.com>; dev@dpdk.org
> Cc: yliu@fridaylinux.org; maxime.coquelin@redhat.com
> Subject: Re: [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
> 
> 
> Hi Zhiyong,
> 
> 
> On 11/8/2017 7:03 PM, Zhiyong Yang wrote:
> > When running l3fwd-power to test virtio rxq interrupt using vfio pci
> > noiommu mode, startup fails. In the function virtio_read_caps, the
> > code if (flags & PCI_MSIX_ENABLE) intends to double check if vfio msix
> > is enabled or not. However, it is not enable at that stage. So
> > use_msix is assigned to "0", not "1", which causes the failure of
> > configuring rxq intr in l3fwd-power.
> > This patch adds the function vtpci_msix_detect to detect the status of
> > msix when interrupt changes happen.
> > In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> > rte_intr_enable/disable to enhance the ability to detect msix. Only
> > support and enable msix can assign "1" to use_msix.
> 
> Should be "2". Better to use macro here.
> 
> >
> > Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> > Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> > ---
> > @@ -1370,7 +1411,15 @@ virtio_init_device(struct rte_eth_dev *eth_dev,
> uint64_t req_features)
> >   	struct virtio_net_config local_config;
> >   	struct rte_pci_device *pci_dev = NULL;
> >   	int ret;
> > +	int msix_detect;
> >
> > +	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(eth_dev));
> > +	if (msix_detect < 0)
> > +		return -1;
> > +	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
> > +		hw->use_msix = 1;
> > +	else
> > +		hw->use_msix = 0;
> 
> Ditto, we directly assign return value to hw->use_msix.
> 
The function call can be removed if use_misx  can use 0, 1, 2 directly
We can implement the same logic  in  virtio_read_caps instead.

Thanks
Zhiyong

^ permalink raw reply	[flat|nested] 21+ messages in thread

* [dpdk-dev] [PATCH v3] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-08 11:03 ` [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
  2017-11-08 13:52   ` Tan, Jianfeng
@ 2017-11-09  3:18   ` Zhiyong Yang
  2017-11-09  3:47     ` Tan, Jianfeng
  2017-11-09  4:46     ` [dpdk-dev] [PATCH v4] " Zhiyong Yang
  1 sibling, 2 replies; 21+ messages in thread
From: Zhiyong Yang @ 2017-11-09  3:18 UTC (permalink / raw)
  To: dev; +Cc: yliu, jianfeng.tan, Zhiyong Yang

When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix. Only
supporting and enabling msix can assign "VIRTIO_MSIX_ENABLED(2)" to
use_msix.

Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
---

Changes in v3:
Simply the code according to jianfeng's comments.

Changes in v2:
Add the capability to detect msix if virtio intr changes.

 drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++------
 drivers/net/virtio/virtio_pci.c    | 48 ++++++++++++++++++++++++++++++++++++--
 drivers/net/virtio/virtio_pci.h    |  6 +++++
 3 files changed, 91 insertions(+), 9 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..87ac2bee6 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
 static void virtio_mac_addr_set(struct rte_eth_dev *dev,
 				struct ether_addr *mac_addr);
 
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
 static int virtio_dev_queue_stats_mapping_set(
 	struct rte_eth_dev *eth_dev,
 	uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
 		virtio_queues_unbind_intr(dev);
 
 	if (intr_conf->lsc || intr_conf->rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 		rte_intr_efd_disable(dev->intr_handle);
 		rte_free(dev->intr_handle->intr_vec);
 		dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 }
 
 static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_enable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_disable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
 virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
 {
 	uint64_t host_features;
@@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
 	isr = vtpci_isr(hw);
 	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
 
-	if (rte_intr_enable(dev->intr_handle) < 0)
+	if (virtio_intr_enable(dev) < 0)
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 
 	if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
 	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
 	 * (22) will be ignored.
 	 */
-	if (rte_intr_enable(dev->intr_handle) < 0) {
+	if (virtio_intr_enable(dev) < 0) {
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 		return -1;
 	}
@@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 	}
 
 	/* If host does not support both status and MSI-X then disable LSC */
-	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+	    hw->use_msix != VIRTIO_MSIX_NONE)
 		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
 	else
 		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
 	 */
 	if (dev->data->dev_conf.intr_conf.lsc ||
 	    dev->data->dev_conf.intr_conf.rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
-		if (rte_intr_enable(dev->intr_handle) < 0) {
+		if (virtio_intr_enable(dev) < 0) {
 			PMD_DRV_LOG(ERR, "interrupt enable failed");
 			return -EIO;
 		}
@@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
 	PMD_INIT_LOG(DEBUG, "stop");
 
 	if (intr_conf->lsc || intr_conf->rxq)
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
 	hw->started = 0;
 	memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..10c45228c 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -57,7 +57,8 @@
  * The remaining space is defined by each driver as the per-driver
  * configuration space.
  */
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+		(((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
 
 static inline int
 check_vq_phys_addr_ok(struct virtqueue *vq)
@@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
 			uint16_t flags = ((uint16_t *)&cap)[1];
 
 			if (flags & PCI_MSIX_ENABLE)
-				hw->use_msix = 1;
+				hw->use_msix = VIRTIO_MSIX_ENABLED;
+			else
+				hw->use_msix = VIRTIO_MSIX_DISABLED;
 		}
 
 		if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
@@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
 
 	return 0;
 }
+
+/* Return 0 (VIRTIO_MSIX_NONE)
+ * Return 1 (VIRTIO_MSIX_DISABLED)
+ * Return 2 (VIRTIO_MSIX_ENABLED)
+ */
+
+uint8_t
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+	uint8_t pos;
+	struct virtio_pci_cap cap;
+	int ret;
+
+	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+	if (ret < 0) {
+		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+		return VIRTIO_MSIX_NONE;
+	}
+
+	while (pos) {
+		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+		if (ret < 0) {
+			PMD_INIT_LOG(ERR,
+				"failed to read pci cap at pos: %x", pos);
+			break;
+		}
+
+		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+			uint16_t flags = ((uint16_t *)&cap)[1];
+
+			if (flags & PCI_MSIX_ENABLE)
+				return VIRTIO_MSIX_ENABLED;
+			else
+				return VIRTIO_MSIX_DISABLED;
+		}
+
+		pos = cap.cap_next;
+	}
+
+	return VIRTIO_MSIX_NONE;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..600e106eb 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,10 @@ struct virtio_net_config {
 /* The alignment to use between consumer and producer parts of vring. */
 #define VIRTIO_PCI_VRING_ALIGN 4096
 
+#define VIRTIO_MSIX_NONE 0
+#define VIRTIO_MSIX_DISABLED 1
+#define VIRTIO_MSIX_ENABLED 2
+
 static inline int
 vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
 {
@@ -339,6 +343,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
 
 uint8_t vtpci_isr(struct virtio_hw *);
 
+uint8_t vtpci_msix_detect(struct rte_pci_device *dev);
+
 extern const struct virtio_pci_ops legacy_ops;
 extern const struct virtio_pci_ops modern_ops;
 extern const struct virtio_pci_ops virtio_user_ops;
-- 
2.13.3

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  2:11     ` Yang, Zhiyong
@ 2017-11-09  3:31       ` Tan, Jianfeng
  0 siblings, 0 replies; 21+ messages in thread
From: Tan, Jianfeng @ 2017-11-09  3:31 UTC (permalink / raw)
  To: Yang, Zhiyong, dev; +Cc: yliu, maxime.coquelin



On 11/9/2017 10:11 AM, Yang, Zhiyong wrote:
> Hi Jianfeng,
>
>> -----Original Message-----
>> From: Tan, Jianfeng
>> Sent: Wednesday, November 8, 2017 9:53 PM
>> To: Yang, Zhiyong <zhiyong.yang@intel.com>; dev@dpdk.org
>> Cc: yliu@fridaylinux.org; maxime.coquelin@redhat.com
>> Subject: Re: [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci
>>
>>
>> Hi Zhiyong,
>>
>>
>> On 11/8/2017 7:03 PM, Zhiyong Yang wrote:
>>> When running l3fwd-power to test virtio rxq interrupt using vfio pci
>>> noiommu mode, startup fails. In the function virtio_read_caps, the
>>> code if (flags & PCI_MSIX_ENABLE) intends to double check if vfio msix
>>> is enabled or not. However, it is not enable at that stage. So
>>> use_msix is assigned to "0", not "1", which causes the failure of
>>> configuring rxq intr in l3fwd-power.
>>> This patch adds the function vtpci_msix_detect to detect the status of
>>> msix when interrupt changes happen.
>>> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
>>> rte_intr_enable/disable to enhance the ability to detect msix. Only
>>> support and enable msix can assign "1" to use_msix.
>> Should be "2". Better to use macro here.
>>
>>> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
>>> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
>>> ---
>>> @@ -1370,7 +1411,15 @@ virtio_init_device(struct rte_eth_dev *eth_dev,
>> uint64_t req_features)
>>>    	struct virtio_net_config local_config;
>>>    	struct rte_pci_device *pci_dev = NULL;
>>>    	int ret;
>>> +	int msix_detect;
>>>
>>> +	msix_detect = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(eth_dev));
>>> +	if (msix_detect < 0)
>>> +		return -1;
>>> +	else if (msix_detect == SUPPORT_MSIX_STATUS_ENABLED)
>>> +		hw->use_msix = 1;
>>> +	else
>>> +		hw->use_msix = 0;
>> Ditto, we directly assign return value to hw->use_msix.
>>
> The function call can be removed if use_misx  can use 0, 1, 2 directly
> We can implement the same logic  in  virtio_read_caps instead.

Actually, I prefer not hide such an assignment in this function name 
"*_detect".


> Thanks
> Zhiyong
>

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v3] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  3:18   ` [dpdk-dev] [PATCH v3] " Zhiyong Yang
@ 2017-11-09  3:47     ` Tan, Jianfeng
  2017-11-09  4:01       ` Yang, Zhiyong
  2017-11-09  4:46     ` [dpdk-dev] [PATCH v4] " Zhiyong Yang
  1 sibling, 1 reply; 21+ messages in thread
From: Tan, Jianfeng @ 2017-11-09  3:47 UTC (permalink / raw)
  To: Zhiyong Yang, dev; +Cc: yliu



On 11/9/2017 11:18 AM, Zhiyong Yang wrote:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> time. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function "vtpci_msix_detect" to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix. Only
> supporting and enabling msix can assign "VIRTIO_MSIX_ENABLED(2)" to
> use_msix.

Above sentence seems not correct. As we can assign VIRTIO_MSIX_NONE, 
VIRTIO_MSIX_DISABLED, VIRTIO_MSIX_ENABLED to use_msix to indicate three 
different msix status.


>
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> ---
>
> Changes in v3:
> Simply the code according to jianfeng's comments.
>
> Changes in v2:
> Add the capability to detect msix if virtio intr changes.
>
>   drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++------
>   drivers/net/virtio/virtio_pci.c    | 48 ++++++++++++++++++++++++++++++++++++--
>   drivers/net/virtio/virtio_pci.h    |  6 +++++
>   3 files changed, 91 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index d2576d5e0..87ac2bee6 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
>   static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>   				struct ether_addr *mac_addr);
>   
> +static int virtio_intr_enable(struct rte_eth_dev *dev);
> +static int virtio_intr_disable(struct rte_eth_dev *dev);
> +
>   static int virtio_dev_queue_stats_mapping_set(
>   	struct rte_eth_dev *eth_dev,
>   	uint16_t queue_id,
> @@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
>   		virtio_queues_unbind_intr(dev);
>   
>   	if (intr_conf->lsc || intr_conf->rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   		rte_intr_efd_disable(dev->intr_handle);
>   		rte_free(dev->intr_handle->intr_vec);
>   		dev->intr_handle->intr_vec = NULL;
> @@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
>   }
>   
>   static int
> +virtio_intr_enable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +
> +	if (rte_intr_enable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	if (!hw->virtio_user_dev)
> +		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));

Maybe we can check hw->use_msix as an additional check; if it does not 
equal VIRTIO_MSIX_ENABLE, returns -1.

> +
> +	return 0;
> +}
> +
> +static int
> +virtio_intr_disable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +
> +	if (rte_intr_disable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	if (!hw->virtio_user_dev)
> +		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> +	return 0;
> +}
> +
> +static int
>   virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
>   {
>   	uint64_t host_features;
> @@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
>   	isr = vtpci_isr(hw);
>   	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
>   
> -	if (rte_intr_enable(dev->intr_handle) < 0)
> +	if (virtio_intr_enable(dev) < 0)
>   		PMD_DRV_LOG(ERR, "interrupt enable failed");
>   
>   	if (isr & VIRTIO_PCI_ISR_CONFIG) {
> @@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
>   	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
>   	 * (22) will be ignored.
>   	 */
> -	if (rte_intr_enable(dev->intr_handle) < 0) {
> +	if (virtio_intr_enable(dev) < 0) {
>   		PMD_DRV_LOG(ERR, "interrupt enable failed");
>   		return -1;
>   	}
> @@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
>   	}
>   
>   	/* If host does not support both status and MSI-X then disable LSC */
> -	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
> +	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
> +	    hw->use_msix != VIRTIO_MSIX_NONE)
>   		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
>   	else
>   		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
> @@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
>   	 */
>   	if (dev->data->dev_conf.intr_conf.lsc ||
>   	    dev->data->dev_conf.intr_conf.rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   
> -		if (rte_intr_enable(dev->intr_handle) < 0) {
> +		if (virtio_intr_enable(dev) < 0) {
>   			PMD_DRV_LOG(ERR, "interrupt enable failed");
>   			return -EIO;
>   		}
> @@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
>   	PMD_INIT_LOG(DEBUG, "stop");
>   
>   	if (intr_conf->lsc || intr_conf->rxq)
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   
>   	hw->started = 0;
>   	memset(&link, 0, sizeof(link));
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..10c45228c 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -57,7 +57,8 @@
>    * The remaining space is defined by each driver as the per-driver
>    * configuration space.
>    */
> -#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
> +#define VIRTIO_PCI_CONFIG(hw) \
> +		(((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
>   
>   static inline int
>   check_vq_phys_addr_ok(struct virtqueue *vq)
> @@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
>   			uint16_t flags = ((uint16_t *)&cap)[1];
>   
>   			if (flags & PCI_MSIX_ENABLE)
> -				hw->use_msix = 1;
> +				hw->use_msix = VIRTIO_MSIX_ENABLED;
> +			else
> +				hw->use_msix = VIRTIO_MSIX_DISABLED;
>   		}
>   
>   		if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
> @@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
>   
>   	return 0;
>   }
> +
> +/* Return 0 (VIRTIO_MSIX_NONE)
> + * Return 1 (VIRTIO_MSIX_DISABLED)
> + * Return 2 (VIRTIO_MSIX_ENABLED)
> + */
> +
> +uint8_t
> +vtpci_msix_detect(struct rte_pci_device *dev)
> +{
> +	uint8_t pos;
> +	struct virtio_pci_cap cap;
> +	int ret;
> +
> +	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
> +	if (ret < 0) {
> +		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
> +		return VIRTIO_MSIX_NONE;
> +	}
> +
> +	while (pos) {
> +		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
> +		if (ret < 0) {
> +			PMD_INIT_LOG(ERR,
> +				"failed to read pci cap at pos: %x", pos);
> +			break;
> +		}
> +
> +		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> +			uint16_t flags = ((uint16_t *)&cap)[1];
> +
> +			if (flags & PCI_MSIX_ENABLE)
> +				return VIRTIO_MSIX_ENABLED;
> +			else
> +				return VIRTIO_MSIX_DISABLED;
> +		}
> +
> +		pos = cap.cap_next;
> +	}
> +
> +	return VIRTIO_MSIX_NONE;
> +}
> diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
> index 36d452c06..600e106eb 100644
> --- a/drivers/net/virtio/virtio_pci.h
> +++ b/drivers/net/virtio/virtio_pci.h
> @@ -314,6 +314,10 @@ struct virtio_net_config {
>   /* The alignment to use between consumer and producer parts of vring. */
>   #define VIRTIO_PCI_VRING_ALIGN 4096
>   
> +#define VIRTIO_MSIX_NONE 0
> +#define VIRTIO_MSIX_DISABLED 1
> +#define VIRTIO_MSIX_ENABLED 2
> +
>   static inline int
>   vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
>   {
> @@ -339,6 +343,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
>   
>   uint8_t vtpci_isr(struct virtio_hw *);
>   
> +uint8_t vtpci_msix_detect(struct rte_pci_device *dev);
> +
>   extern const struct virtio_pci_ops legacy_ops;
>   extern const struct virtio_pci_ops modern_ops;
>   extern const struct virtio_pci_ops virtio_user_ops;

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v3] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  3:47     ` Tan, Jianfeng
@ 2017-11-09  4:01       ` Yang, Zhiyong
  2017-11-09  4:40         ` Tan, Jianfeng
  0 siblings, 1 reply; 21+ messages in thread
From: Yang, Zhiyong @ 2017-11-09  4:01 UTC (permalink / raw)
  To: Tan, Jianfeng, dev; +Cc: yliu



> -----Original Message-----
> From: Tan, Jianfeng
> Sent: Thursday, November 9, 2017 11:47 AM
> To: Yang, Zhiyong <zhiyong.yang@intel.com>; dev@dpdk.org
> Cc: yliu@fridaylinux.org
> Subject: Re: [PATCH v3] net/virtio: fix rxq intr config fails using vfio-pci
> 
> 
> 
> On 11/9/2017 11:18 AM, Zhiyong Yang wrote:
> > When running l3fwd-power to test virtio rxq interrupt using vfio pci
> > noiommu mode, startup fails. In the function virtio_read_caps, the
> > code if (flags & PCI_MSIX_ENABLE) intends to double check if vfio msix
> > is enabled or not. However, it is not enable at that time. So use_msix
> > is assigned to "0", not "1", which causes the failure of configuring
> > rxq intr in l3fwd-power.
> > This patch adds the function "vtpci_msix_detect" to detect the status
> > of msix when interrupt changes happen.
> > In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> > rte_intr_enable/disable to enhance the ability to detect msix. Only
> > supporting and enabling msix can assign "VIRTIO_MSIX_ENABLED(2)" to
> > use_msix.
> 
> Above sentence seems not correct. As we can assign VIRTIO_MSIX_NONE,
> VIRTIO_MSIX_DISABLED, VIRTIO_MSIX_ENABLED to use_msix to indicate three
> different msix status.
> 

Right, I just want to say, supporting and enabling msix are true, use_misx can be assigned to 2.

> 
> >
> > Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> > Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> > ---
> >
> > Changes in v3:
> > Simply the code according to jianfeng's comments.
> >
> > Changes in v2:
> > Add the capability to detect msix if virtio intr changes.
> >
> >   drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++--
> ----
> >   drivers/net/virtio/virtio_pci.c    | 48
> ++++++++++++++++++++++++++++++++++++--
> >   drivers/net/virtio/virtio_pci.h    |  6 +++++
> >   3 files changed, 91 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/net/virtio/virtio_ethdev.c
> > b/drivers/net/virtio/virtio_ethdev.c
> > index d2576d5e0..87ac2bee6 100644
> > --- a/drivers/net/virtio/virtio_ethdev.c
> > +++ b/drivers/net/virtio/virtio_ethdev.c
> > @@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev
> *dev, uint32_t index);
> >   static void virtio_mac_addr_set(struct rte_eth_dev *dev,
> >   				struct ether_addr *mac_addr);
> >
> > +static int virtio_intr_enable(struct rte_eth_dev *dev); static int
> > +virtio_intr_disable(struct rte_eth_dev *dev);
> > +
> >   static int virtio_dev_queue_stats_mapping_set(
> >   	struct rte_eth_dev *eth_dev,
> >   	uint16_t queue_id,
> > @@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
> >   		virtio_queues_unbind_intr(dev);
> >
> >   	if (intr_conf->lsc || intr_conf->rxq) {
> > -		rte_intr_disable(dev->intr_handle);
> > +		virtio_intr_disable(dev);
> >   		rte_intr_efd_disable(dev->intr_handle);
> >   		rte_free(dev->intr_handle->intr_vec);
> >   		dev->intr_handle->intr_vec = NULL; @@ -1160,6 +1163,34 @@
> > virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
> >   }
> >
> >   static int
> > +virtio_intr_enable(struct rte_eth_dev *dev) {
> > +	struct virtio_hw *hw = dev->data->dev_private;
> > +
> > +	if (rte_intr_enable(dev->intr_handle) < 0)
> > +		return -1;
> > +
> > +	if (!hw->virtio_user_dev)
> > +		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> 
> Maybe we can check hw->use_msix as an additional check; if it does not equal
> VIRTIO_MSIX_ENABLE, returns -1.
>  
>From my understanding, it is unnecessary. 
Functionality of virtio_intr_enable  should be generic.
Igb_uio or other can use it. it should be no harm to others.
 we add msix detect here in order to just get use_msix status. 

Thanks
Zhiyong 

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v3] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  4:01       ` Yang, Zhiyong
@ 2017-11-09  4:40         ` Tan, Jianfeng
  0 siblings, 0 replies; 21+ messages in thread
From: Tan, Jianfeng @ 2017-11-09  4:40 UTC (permalink / raw)
  To: Yang, Zhiyong, dev; +Cc: yliu



On 11/9/2017 12:01 PM, Yang, Zhiyong wrote:

>>>    static int
>>> +virtio_intr_enable(struct rte_eth_dev *dev) {
>>> +	struct virtio_hw *hw = dev->data->dev_private;
>>> +
>>> +	if (rte_intr_enable(dev->intr_handle) < 0)
>>> +		return -1;
>>> +
>>> +	if (!hw->virtio_user_dev)
>>> +		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
>> Maybe we can check hw->use_msix as an additional check; if it does not equal
>> VIRTIO_MSIX_ENABLE, returns -1.
>>   
>  From my understanding, it is unnecessary.
> Functionality of virtio_intr_enable  should be generic.
> Igb_uio or other can use it. it should be no harm to others.
>   we add msix detect here in order to just get use_msix status.

Fair enough.

>
> Thanks
> Zhiyong

^ permalink raw reply	[flat|nested] 21+ messages in thread

* [dpdk-dev] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  3:18   ` [dpdk-dev] [PATCH v3] " Zhiyong Yang
  2017-11-09  3:47     ` Tan, Jianfeng
@ 2017-11-09  4:46     ` Zhiyong Yang
  2017-11-09  6:51       ` Tan, Jianfeng
                         ` (2 more replies)
  1 sibling, 3 replies; 21+ messages in thread
From: Zhiyong Yang @ 2017-11-09  4:46 UTC (permalink / raw)
  To: dev; +Cc: stable, jianfeng.tan, yliu, maxime.coquelin, Zhiyong Yang

When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix.
use_msix can indicate three different msix status by:
VIRTIO_MSIX_NONE (0)
VIRTIO_MSIX_DISABLED (1)
VIRTIO_MSIX_ENABLED (2)

CC: stable@dpdk.org
CC: jianfeng.tan@intel.com
CC: yliu@fridaylinux.org
CC: maxime.coquelin@redhat.com

Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
---

Changes in v4:
Enhance the commit log description.

Changes in v3:
Simply the code according to jianfeng's comments.

Changes in v2:
Add the capability to detect msix if virtio intr changes.

 drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++------
 drivers/net/virtio/virtio_pci.c    | 48 ++++++++++++++++++++++++++++++++++++--
 drivers/net/virtio/virtio_pci.h    |  6 +++++
 3 files changed, 91 insertions(+), 9 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..87ac2bee6 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
 static void virtio_mac_addr_set(struct rte_eth_dev *dev,
 				struct ether_addr *mac_addr);
 
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
 static int virtio_dev_queue_stats_mapping_set(
 	struct rte_eth_dev *eth_dev,
 	uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
 		virtio_queues_unbind_intr(dev);
 
 	if (intr_conf->lsc || intr_conf->rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 		rte_intr_efd_disable(dev->intr_handle);
 		rte_free(dev->intr_handle->intr_vec);
 		dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 }
 
 static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_enable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_disable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
 virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
 {
 	uint64_t host_features;
@@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
 	isr = vtpci_isr(hw);
 	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
 
-	if (rte_intr_enable(dev->intr_handle) < 0)
+	if (virtio_intr_enable(dev) < 0)
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 
 	if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
 	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
 	 * (22) will be ignored.
 	 */
-	if (rte_intr_enable(dev->intr_handle) < 0) {
+	if (virtio_intr_enable(dev) < 0) {
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 		return -1;
 	}
@@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 	}
 
 	/* If host does not support both status and MSI-X then disable LSC */
-	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+	    hw->use_msix != VIRTIO_MSIX_NONE)
 		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
 	else
 		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
 	 */
 	if (dev->data->dev_conf.intr_conf.lsc ||
 	    dev->data->dev_conf.intr_conf.rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
-		if (rte_intr_enable(dev->intr_handle) < 0) {
+		if (virtio_intr_enable(dev) < 0) {
 			PMD_DRV_LOG(ERR, "interrupt enable failed");
 			return -EIO;
 		}
@@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
 	PMD_INIT_LOG(DEBUG, "stop");
 
 	if (intr_conf->lsc || intr_conf->rxq)
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
 	hw->started = 0;
 	memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..10c45228c 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -57,7 +57,8 @@
  * The remaining space is defined by each driver as the per-driver
  * configuration space.
  */
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+		(((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
 
 static inline int
 check_vq_phys_addr_ok(struct virtqueue *vq)
@@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
 			uint16_t flags = ((uint16_t *)&cap)[1];
 
 			if (flags & PCI_MSIX_ENABLE)
-				hw->use_msix = 1;
+				hw->use_msix = VIRTIO_MSIX_ENABLED;
+			else
+				hw->use_msix = VIRTIO_MSIX_DISABLED;
 		}
 
 		if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
@@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
 
 	return 0;
 }
+
+/* Return 0 (VIRTIO_MSIX_NONE)
+ * Return 1 (VIRTIO_MSIX_DISABLED)
+ * Return 2 (VIRTIO_MSIX_ENABLED)
+ */
+
+uint8_t
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+	uint8_t pos;
+	struct virtio_pci_cap cap;
+	int ret;
+
+	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+	if (ret < 0) {
+		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+		return VIRTIO_MSIX_NONE;
+	}
+
+	while (pos) {
+		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+		if (ret < 0) {
+			PMD_INIT_LOG(ERR,
+				"failed to read pci cap at pos: %x", pos);
+			break;
+		}
+
+		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+			uint16_t flags = ((uint16_t *)&cap)[1];
+
+			if (flags & PCI_MSIX_ENABLE)
+				return VIRTIO_MSIX_ENABLED;
+			else
+				return VIRTIO_MSIX_DISABLED;
+		}
+
+		pos = cap.cap_next;
+	}
+
+	return VIRTIO_MSIX_NONE;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..600e106eb 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,10 @@ struct virtio_net_config {
 /* The alignment to use between consumer and producer parts of vring. */
 #define VIRTIO_PCI_VRING_ALIGN 4096
 
+#define VIRTIO_MSIX_NONE 0
+#define VIRTIO_MSIX_DISABLED 1
+#define VIRTIO_MSIX_ENABLED 2
+
 static inline int
 vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
 {
@@ -339,6 +343,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
 
 uint8_t vtpci_isr(struct virtio_hw *);
 
+uint8_t vtpci_msix_detect(struct rte_pci_device *dev);
+
 extern const struct virtio_pci_ops legacy_ops;
 extern const struct virtio_pci_ops modern_ops;
 extern const struct virtio_pci_ops virtio_user_ops;
-- 
2.13.3

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  4:46     ` [dpdk-dev] [PATCH v4] " Zhiyong Yang
@ 2017-11-09  6:51       ` Tan, Jianfeng
  2017-11-09  8:18       ` Maxime Coquelin
  2017-11-09  8:55       ` [dpdk-dev] [PATCH v5] " Zhiyong Yang
  2 siblings, 0 replies; 21+ messages in thread
From: Tan, Jianfeng @ 2017-11-09  6:51 UTC (permalink / raw)
  To: Yang, Zhiyong, dev; +Cc: stable, yliu, maxime.coquelin



> -----Original Message-----
> From: Yang, Zhiyong
> Sent: Thursday, November 9, 2017 12:46 PM
> To: dev@dpdk.org
> Cc: stable@dpdk.org; Tan, Jianfeng; yliu@fridaylinux.org;
> maxime.coquelin@redhat.com; Yang, Zhiyong
> Subject: [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
> 
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> time. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function "vtpci_msix_detect" to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix.
> use_msix can indicate three different msix status by:
> VIRTIO_MSIX_NONE (0)
> VIRTIO_MSIX_DISABLED (1)
> VIRTIO_MSIX_ENABLED (2)
> 
> CC: stable@dpdk.org
> CC: jianfeng.tan@intel.com
> CC: yliu@fridaylinux.org
> CC: maxime.coquelin@redhat.com
> 
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>

Except a small nit, looks good to me:

Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>

> ---
> 
> Changes in v4:
> Enhance the commit log description.
> 
> Changes in v3:
> Simply the code according to jianfeng's comments.
> 
> Changes in v2:
> Add the capability to detect msix if virtio intr changes.
> 
>  drivers/net/virtio/virtio_ethdev.c | 46
> ++++++++++++++++++++++++++++++------
>  drivers/net/virtio/virtio_pci.c    | 48
> ++++++++++++++++++++++++++++++++++++--
>  drivers/net/virtio/virtio_pci.h    |  6 +++++
>  3 files changed, 91 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/virtio/virtio_ethdev.c
> b/drivers/net/virtio/virtio_ethdev.c
> index d2576d5e0..87ac2bee6 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev
> *dev, uint32_t index);
>  static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>  				struct ether_addr *mac_addr);
> 
> +static int virtio_intr_enable(struct rte_eth_dev *dev);
> +static int virtio_intr_disable(struct rte_eth_dev *dev);
> +
>  static int virtio_dev_queue_stats_mapping_set(
>  	struct rte_eth_dev *eth_dev,
>  	uint16_t queue_id,
> @@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
>  		virtio_queues_unbind_intr(dev);
> 
>  	if (intr_conf->lsc || intr_conf->rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>  		rte_intr_efd_disable(dev->intr_handle);
>  		rte_free(dev->intr_handle->intr_vec);
>  		dev->intr_handle->intr_vec = NULL;
> @@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev,
> uint16_t vlan_id, int on)
>  }
> 
>  static int
> +virtio_intr_enable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +
> +	if (rte_intr_enable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	if (!hw->virtio_user_dev)
> +		hw->use_msix =
> vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> +	return 0;
> +}
> +
> +static int
> +virtio_intr_disable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +
> +	if (rte_intr_disable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	if (!hw->virtio_user_dev)
> +		hw->use_msix =
> vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> +	return 0;
> +}
> +
> +static int
>  virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
>  {
>  	uint64_t host_features;
> @@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
>  	isr = vtpci_isr(hw);
>  	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
> 
> -	if (rte_intr_enable(dev->intr_handle) < 0)
> +	if (virtio_intr_enable(dev) < 0)
>  		PMD_DRV_LOG(ERR, "interrupt enable failed");
> 
>  	if (isr & VIRTIO_PCI_ISR_CONFIG) {
> @@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
>  	 * to change the config size from 20 to 24, or
> VIRTIO_MSI_QUEUE_VECTOR
>  	 * (22) will be ignored.
>  	 */
> -	if (rte_intr_enable(dev->intr_handle) < 0) {
> +	if (virtio_intr_enable(dev) < 0) {
>  		PMD_DRV_LOG(ERR, "interrupt enable failed");
>  		return -1;
>  	}
> @@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev,
> uint64_t req_features)
>  	}
> 
>  	/* If host does not support both status and MSI-X then disable LSC */
> -	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw-
> >use_msix)
> +	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
> +	    hw->use_msix != VIRTIO_MSIX_NONE)
>  		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
>  	else
>  		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
> @@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
>  	 */
>  	if (dev->data->dev_conf.intr_conf.lsc ||
>  	    dev->data->dev_conf.intr_conf.rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
> 
> -		if (rte_intr_enable(dev->intr_handle) < 0) {
> +		if (virtio_intr_enable(dev) < 0) {
>  			PMD_DRV_LOG(ERR, "interrupt enable failed");
>  			return -EIO;
>  		}
> @@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
>  	PMD_INIT_LOG(DEBUG, "stop");
> 
>  	if (intr_conf->lsc || intr_conf->rxq)
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
> 
>  	hw->started = 0;
>  	memset(&link, 0, sizeof(link));
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..10c45228c 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -57,7 +57,8 @@
>   * The remaining space is defined by each driver as the per-driver
>   * configuration space.
>   */
> -#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
> +#define VIRTIO_PCI_CONFIG(hw) \
> +		(((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
> 
>  static inline int
>  check_vq_phys_addr_ok(struct virtqueue *vq)
> @@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct
> virtio_hw *hw)
>  			uint16_t flags = ((uint16_t *)&cap)[1];
> 
>  			if (flags & PCI_MSIX_ENABLE)
> -				hw->use_msix = 1;
> +				hw->use_msix = VIRTIO_MSIX_ENABLED;
> +			else
> +				hw->use_msix = VIRTIO_MSIX_DISABLED;
>  		}
> 
>  		if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
> @@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct
> virtio_hw *hw)
> 
>  	return 0;
>  }
> +
> +/* Return 0 (VIRTIO_MSIX_NONE)
> + * Return 1 (VIRTIO_MSIX_DISABLED)
> + * Return 2 (VIRTIO_MSIX_ENABLED)
> + */

Above comments seems not necessary as it just repeat it's just the macro's definition.

Thanks,
Jianfeng

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  4:46     ` [dpdk-dev] [PATCH v4] " Zhiyong Yang
  2017-11-09  6:51       ` Tan, Jianfeng
@ 2017-11-09  8:18       ` Maxime Coquelin
  2017-11-09  8:55       ` [dpdk-dev] [PATCH v5] " Zhiyong Yang
  2 siblings, 0 replies; 21+ messages in thread
From: Maxime Coquelin @ 2017-11-09  8:18 UTC (permalink / raw)
  To: Zhiyong Yang, dev; +Cc: stable, jianfeng.tan, yliu



On 11/09/2017 05:46 AM, Zhiyong Yang wrote:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> time. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function "vtpci_msix_detect" to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix.
> use_msix can indicate three different msix status by:
> VIRTIO_MSIX_NONE (0)
> VIRTIO_MSIX_DISABLED (1)
> VIRTIO_MSIX_ENABLED (2)
> 
> CC: stable@dpdk.org
> CC: jianfeng.tan@intel.com
> CC: yliu@fridaylinux.org
> CC: maxime.coquelin@redhat.com
> 
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> ---
> 
> Changes in v4:
> Enhance the commit log description.
> 
> Changes in v3:
> Simply the code according to jianfeng's comments.
> 
> Changes in v2:
> Add the capability to detect msix if virtio intr changes.
> 
>   drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++------
>   drivers/net/virtio/virtio_pci.c    | 48 ++++++++++++++++++++++++++++++++++++--
>   drivers/net/virtio/virtio_pci.h    |  6 +++++
>   3 files changed, 91 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index d2576d5e0..87ac2bee6 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
>   static void virtio_mac_addr_set(struct rte_eth_dev *dev,
>   				struct ether_addr *mac_addr);
>   
> +static int virtio_intr_enable(struct rte_eth_dev *dev);
> +static int virtio_intr_disable(struct rte_eth_dev *dev);
> +
>   static int virtio_dev_queue_stats_mapping_set(
>   	struct rte_eth_dev *eth_dev,
>   	uint16_t queue_id,
> @@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
>   		virtio_queues_unbind_intr(dev);
>   
>   	if (intr_conf->lsc || intr_conf->rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   		rte_intr_efd_disable(dev->intr_handle);
>   		rte_free(dev->intr_handle->intr_vec);
>   		dev->intr_handle->intr_vec = NULL;
> @@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
>   }
>   
>   static int
> +virtio_intr_enable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +
> +	if (rte_intr_enable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	if (!hw->virtio_user_dev)
> +		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> +	return 0;
> +}
> +
> +static int
> +virtio_intr_disable(struct rte_eth_dev *dev)
> +{
> +	struct virtio_hw *hw = dev->data->dev_private;
> +
> +	if (rte_intr_disable(dev->intr_handle) < 0)
> +		return -1;
> +
> +	if (!hw->virtio_user_dev)
> +		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> +	return 0;
> +}
> +
> +static int
>   virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
>   {
>   	uint64_t host_features;
> @@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
>   	isr = vtpci_isr(hw);
>   	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
>   
> -	if (rte_intr_enable(dev->intr_handle) < 0)
> +	if (virtio_intr_enable(dev) < 0)
>   		PMD_DRV_LOG(ERR, "interrupt enable failed");
>   
>   	if (isr & VIRTIO_PCI_ISR_CONFIG) {
> @@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
>   	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
>   	 * (22) will be ignored.
>   	 */
> -	if (rte_intr_enable(dev->intr_handle) < 0) {
> +	if (virtio_intr_enable(dev) < 0) {
>   		PMD_DRV_LOG(ERR, "interrupt enable failed");
>   		return -1;
>   	}
> @@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
>   	}
>   
>   	/* If host does not support both status and MSI-X then disable LSC */
> -	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
> +	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
> +	    hw->use_msix != VIRTIO_MSIX_NONE)
>   		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
>   	else
>   		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
> @@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
>   	 */
>   	if (dev->data->dev_conf.intr_conf.lsc ||
>   	    dev->data->dev_conf.intr_conf.rxq) {
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   
> -		if (rte_intr_enable(dev->intr_handle) < 0) {
> +		if (virtio_intr_enable(dev) < 0) {
>   			PMD_DRV_LOG(ERR, "interrupt enable failed");
>   			return -EIO;
>   		}
> @@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
>   	PMD_INIT_LOG(DEBUG, "stop");
>   
>   	if (intr_conf->lsc || intr_conf->rxq)
> -		rte_intr_disable(dev->intr_handle);
> +		virtio_intr_disable(dev);
>   
>   	hw->started = 0;
>   	memset(&link, 0, sizeof(link));
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..10c45228c 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -57,7 +57,8 @@
>    * The remaining space is defined by each driver as the per-driver
>    * configuration space.
>    */
> -#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
> +#define VIRTIO_PCI_CONFIG(hw) \
> +		(((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
>   
>   static inline int
>   check_vq_phys_addr_ok(struct virtqueue *vq)
> @@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
>   			uint16_t flags = ((uint16_t *)&cap)[1];
>   
>   			if (flags & PCI_MSIX_ENABLE)
> -				hw->use_msix = 1;
> +				hw->use_msix = VIRTIO_MSIX_ENABLED;
> +			else
> +				hw->use_msix = VIRTIO_MSIX_DISABLED;
>   		}
>   
>   		if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
> @@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
>   
>   	return 0;
>   }
> +
> +/* Return 0 (VIRTIO_MSIX_NONE)
> + * Return 1 (VIRTIO_MSIX_DISABLED)
> + * Return 2 (VIRTIO_MSIX_ENABLED)
> + */
> +
> +uint8_t
> +vtpci_msix_detect(struct rte_pci_device *dev)
> +{
> +	uint8_t pos;
> +	struct virtio_pci_cap cap;
> +	int ret;
> +
> +	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
> +	if (ret < 0) {
> +		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
> +		return VIRTIO_MSIX_NONE;
> +	}
> +
> +	while (pos) {
> +		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
> +		if (ret < 0) {
> +			PMD_INIT_LOG(ERR,
> +				"failed to read pci cap at pos: %x", pos);
> +			break;
> +		}
> +
> +		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> +			uint16_t flags = ((uint16_t *)&cap)[1];
> +
> +			if (flags & PCI_MSIX_ENABLE)
> +				return VIRTIO_MSIX_ENABLED;
> +			else
> +				return VIRTIO_MSIX_DISABLED;
> +		}
> +
> +		pos = cap.cap_next;
> +	}
> +
> +	return VIRTIO_MSIX_NONE;
> +}
> diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
> index 36d452c06..600e106eb 100644
> --- a/drivers/net/virtio/virtio_pci.h
> +++ b/drivers/net/virtio/virtio_pci.h
> @@ -314,6 +314,10 @@ struct virtio_net_config {
>   /* The alignment to use between consumer and producer parts of vring. */
>   #define VIRTIO_PCI_VRING_ALIGN 4096
>   
> +#define VIRTIO_MSIX_NONE 0
> +#define VIRTIO_MSIX_DISABLED 1
> +#define VIRTIO_MSIX_ENABLED 2

Maybe it could be cleaner to change the defines into an enum.


> +
>   static inline int
>   vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
>   {
> @@ -339,6 +343,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
>   
>   uint8_t vtpci_isr(struct virtio_hw *);
>   
> +uint8_t vtpci_msix_detect(struct rte_pci_device *dev);
So here, the function would return an enum.

Otherwise, the patch looks good to me. If you do the proposed change, 
feel free to add my:

Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>

Thanks,
Maxime

^ permalink raw reply	[flat|nested] 21+ messages in thread

* [dpdk-dev] [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  4:46     ` [dpdk-dev] [PATCH v4] " Zhiyong Yang
  2017-11-09  6:51       ` Tan, Jianfeng
  2017-11-09  8:18       ` Maxime Coquelin
@ 2017-11-09  8:55       ` Zhiyong Yang
  2017-11-09  9:08         ` Maxime Coquelin
  2017-11-09  9:21         ` [dpdk-dev] [PATCH v6] " Zhiyong Yang
  2 siblings, 2 replies; 21+ messages in thread
From: Zhiyong Yang @ 2017-11-09  8:55 UTC (permalink / raw)
  To: dev; +Cc: stable, jianfeng.tan, yliu, maxime.coquelin, Zhiyong Yang

When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix.
use_msix can indicate three different msix status by:
VIRTIO_MSIX_NONE (0)
VIRTIO_MSIX_DISABLED (1)
VIRTIO_MSIX_ENABLED (2)

CC: stable@dpdk.org
CC: jianfeng.tan@intel.com
CC: yliu@fridaylinux.org
CC: maxime.coquelin@redhat.com

Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---

Changes in v5:
1. Introduce new enum data type "VIRTIO_MSIX_STATUS" instead of macros.
2. Remove the unnecessary comments.

Changes in v4:
Enhance the commit log description.

Changes in v3:
Simply the code according to jianfeng's comments.

Changes in v2:
Add the capability to detect msix if virtio intr changes.

 drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++++------
 drivers/net/virtio/virtio_pci.c    | 43 +++++++++++++++++++++++++++++++++--
 drivers/net/virtio/virtio_pci.h    |  8 +++++++
 3 files changed, 88 insertions(+), 9 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..87ac2bee6 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
 static void virtio_mac_addr_set(struct rte_eth_dev *dev,
 				struct ether_addr *mac_addr);
 
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
 static int virtio_dev_queue_stats_mapping_set(
 	struct rte_eth_dev *eth_dev,
 	uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
 		virtio_queues_unbind_intr(dev);
 
 	if (intr_conf->lsc || intr_conf->rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 		rte_intr_efd_disable(dev->intr_handle);
 		rte_free(dev->intr_handle->intr_vec);
 		dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 }
 
 static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_enable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_disable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
 virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
 {
 	uint64_t host_features;
@@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
 	isr = vtpci_isr(hw);
 	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
 
-	if (rte_intr_enable(dev->intr_handle) < 0)
+	if (virtio_intr_enable(dev) < 0)
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 
 	if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
 	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
 	 * (22) will be ignored.
 	 */
-	if (rte_intr_enable(dev->intr_handle) < 0) {
+	if (virtio_intr_enable(dev) < 0) {
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 		return -1;
 	}
@@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 	}
 
 	/* If host does not support both status and MSI-X then disable LSC */
-	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+	    hw->use_msix != VIRTIO_MSIX_NONE)
 		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
 	else
 		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
 	 */
 	if (dev->data->dev_conf.intr_conf.lsc ||
 	    dev->data->dev_conf.intr_conf.rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
-		if (rte_intr_enable(dev->intr_handle) < 0) {
+		if (virtio_intr_enable(dev) < 0) {
 			PMD_DRV_LOG(ERR, "interrupt enable failed");
 			return -EIO;
 		}
@@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
 	PMD_INIT_LOG(DEBUG, "stop");
 
 	if (intr_conf->lsc || intr_conf->rxq)
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
 	hw->started = 0;
 	memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..d6016de22 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -57,7 +57,8 @@
  * The remaining space is defined by each driver as the per-driver
  * configuration space.
  */
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+		(((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
 
 static inline int
 check_vq_phys_addr_ok(struct virtqueue *vq)
@@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
 			uint16_t flags = ((uint16_t *)&cap)[1];
 
 			if (flags & PCI_MSIX_ENABLE)
-				hw->use_msix = 1;
+				hw->use_msix = VIRTIO_MSIX_ENABLED;
+			else
+				hw->use_msix = VIRTIO_MSIX_DISABLED;
 		}
 
 		if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
@@ -710,3 +713,39 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
 
 	return 0;
 }
+
+enum VIRTIO_MSIX_STATUS
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+	uint8_t pos;
+	struct virtio_pci_cap cap;
+	int ret;
+
+	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+	if (ret < 0) {
+		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+		return VIRTIO_MSIX_NONE;
+	}
+
+	while (pos) {
+		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+		if (ret < 0) {
+			PMD_INIT_LOG(ERR,
+				"failed to read pci cap at pos: %x", pos);
+			break;
+		}
+
+		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+			uint16_t flags = ((uint16_t *)&cap)[1];
+
+			if (flags & PCI_MSIX_ENABLE)
+				return VIRTIO_MSIX_ENABLED;
+			else
+				return VIRTIO_MSIX_DISABLED;
+		}
+
+		pos = cap.cap_next;
+	}
+
+	return VIRTIO_MSIX_NONE;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..28e9af6c7 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,12 @@ struct virtio_net_config {
 /* The alignment to use between consumer and producer parts of vring. */
 #define VIRTIO_PCI_VRING_ALIGN 4096
 
+enum VIRTIO_MSIX_STATUS {
+	VIRTIO_MSIX_NONE = 0,
+	VIRTIO_MSIX_DISABLED = 1,
+	VIRTIO_MSIX_ENABLED = 2
+};
+
 static inline int
 vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
 {
@@ -339,6 +345,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
 
 uint8_t vtpci_isr(struct virtio_hw *);
 
+enum VIRTIO_MSIX_STATUS vtpci_msix_detect(struct rte_pci_device *dev);
+
 extern const struct virtio_pci_ops legacy_ops;
 extern const struct virtio_pci_ops modern_ops;
 extern const struct virtio_pci_ops virtio_user_ops;
-- 
2.13.3

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  8:55       ` [dpdk-dev] [PATCH v5] " Zhiyong Yang
@ 2017-11-09  9:08         ` Maxime Coquelin
  2017-11-09  9:16           ` Yang, Zhiyong
  2017-11-09  9:21         ` [dpdk-dev] [PATCH v6] " Zhiyong Yang
  1 sibling, 1 reply; 21+ messages in thread
From: Maxime Coquelin @ 2017-11-09  9:08 UTC (permalink / raw)
  To: Zhiyong Yang, dev; +Cc: stable, jianfeng.tan, yliu



On 11/09/2017 09:55 AM, Zhiyong Yang wrote:
> diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
> index 36d452c06..28e9af6c7 100644
> --- a/drivers/net/virtio/virtio_pci.h
> +++ b/drivers/net/virtio/virtio_pci.h
> @@ -314,6 +314,12 @@ struct virtio_net_config {
>   /* The alignment to use between consumer and producer parts of vring. */
>   #define VIRTIO_PCI_VRING_ALIGN 4096
>   
> +enum VIRTIO_MSIX_STATUS {
Please change VIRTIO_MSIX_STATUS to lowercase.
Other than that, this is what I had in mind.

Thanks!
Maxime
> +	VIRTIO_MSIX_NONE = 0,
> +	VIRTIO_MSIX_DISABLED = 1,
> +	VIRTIO_MSIX_ENABLED = 2
> +};
> +

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  9:08         ` Maxime Coquelin
@ 2017-11-09  9:16           ` Yang, Zhiyong
  0 siblings, 0 replies; 21+ messages in thread
From: Yang, Zhiyong @ 2017-11-09  9:16 UTC (permalink / raw)
  To: Maxime Coquelin, dev; +Cc: stable, Tan, Jianfeng, yliu



> -----Original Message-----
> From: Maxime Coquelin [mailto:maxime.coquelin@redhat.com]
> Sent: Thursday, November 9, 2017 5:09 PM
> To: Yang, Zhiyong <zhiyong.yang@intel.com>; dev@dpdk.org
> Cc: stable@dpdk.org; Tan, Jianfeng <jianfeng.tan@intel.com>;
> yliu@fridaylinux.org
> Subject: Re: [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
> 
> 
> 
> On 11/09/2017 09:55 AM, Zhiyong Yang wrote:
> > diff --git a/drivers/net/virtio/virtio_pci.h
> > b/drivers/net/virtio/virtio_pci.h index 36d452c06..28e9af6c7 100644
> > --- a/drivers/net/virtio/virtio_pci.h
> > +++ b/drivers/net/virtio/virtio_pci.h
> > @@ -314,6 +314,12 @@ struct virtio_net_config {
> >   /* The alignment to use between consumer and producer parts of vring. */
> >   #define VIRTIO_PCI_VRING_ALIGN 4096
> >
> > +enum VIRTIO_MSIX_STATUS {
> Please change VIRTIO_MSIX_STATUS to lowercase.
> Other than that, this is what I had in mind.
> 

Thanks for your reminder.  My negligence and not notice it.

Thanks
Zhiyong

^ permalink raw reply	[flat|nested] 21+ messages in thread

* [dpdk-dev] [PATCH v6] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  8:55       ` [dpdk-dev] [PATCH v5] " Zhiyong Yang
  2017-11-09  9:08         ` Maxime Coquelin
@ 2017-11-09  9:21         ` Zhiyong Yang
  2017-11-11 14:34           ` Thomas Monjalon
  1 sibling, 1 reply; 21+ messages in thread
From: Zhiyong Yang @ 2017-11-09  9:21 UTC (permalink / raw)
  To: dev; +Cc: stable, jianfeng.tan, yliu, maxime.coquelin, Zhiyong Yang

When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix.
use_msix can indicate three different msix status by:
VIRTIO_MSIX_NONE (0)
VIRTIO_MSIX_DISABLED (1)
VIRTIO_MSIX_ENABLED (2)

CC: stable@dpdk.org
CC: jianfeng.tan@intel.com
CC: yliu@fridaylinux.org
CC: maxime.coquelin@redhat.com

Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---

Changes in v6:
Change enum type name "VIRTIO_MSIX_STATUS" to "virtio_msix_status".

Changes in v5:
1. Introduce new enum data type "VIRTIO_MSIX_STATUS" instead of macros.
2. Remove the unnecessary comments.

Changes in v4:
Enhance the commit log description.

Changes in v3:
Simply the code according to jianfeng's comments.

Changes in v2:
Add the capability to detect msix if virtio intr changes.

 drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++++------
 drivers/net/virtio/virtio_pci.c    | 43 +++++++++++++++++++++++++++++++++--
 drivers/net/virtio/virtio_pci.h    |  8 +++++++
 3 files changed, 88 insertions(+), 9 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..87ac2bee6 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
 static void virtio_mac_addr_set(struct rte_eth_dev *dev,
 				struct ether_addr *mac_addr);
 
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
 static int virtio_dev_queue_stats_mapping_set(
 	struct rte_eth_dev *eth_dev,
 	uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
 		virtio_queues_unbind_intr(dev);
 
 	if (intr_conf->lsc || intr_conf->rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 		rte_intr_efd_disable(dev->intr_handle);
 		rte_free(dev->intr_handle->intr_vec);
 		dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 }
 
 static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_enable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+	struct virtio_hw *hw = dev->data->dev_private;
+
+	if (rte_intr_disable(dev->intr_handle) < 0)
+		return -1;
+
+	if (!hw->virtio_user_dev)
+		hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+	return 0;
+}
+
+static int
 virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
 {
 	uint64_t host_features;
@@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
 	isr = vtpci_isr(hw);
 	PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
 
-	if (rte_intr_enable(dev->intr_handle) < 0)
+	if (virtio_intr_enable(dev) < 0)
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 
 	if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
 	 * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
 	 * (22) will be ignored.
 	 */
-	if (rte_intr_enable(dev->intr_handle) < 0) {
+	if (virtio_intr_enable(dev) < 0) {
 		PMD_DRV_LOG(ERR, "interrupt enable failed");
 		return -1;
 	}
@@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 	}
 
 	/* If host does not support both status and MSI-X then disable LSC */
-	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+	if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+	    hw->use_msix != VIRTIO_MSIX_NONE)
 		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
 	else
 		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
 	 */
 	if (dev->data->dev_conf.intr_conf.lsc ||
 	    dev->data->dev_conf.intr_conf.rxq) {
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
-		if (rte_intr_enable(dev->intr_handle) < 0) {
+		if (virtio_intr_enable(dev) < 0) {
 			PMD_DRV_LOG(ERR, "interrupt enable failed");
 			return -EIO;
 		}
@@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
 	PMD_INIT_LOG(DEBUG, "stop");
 
 	if (intr_conf->lsc || intr_conf->rxq)
-		rte_intr_disable(dev->intr_handle);
+		virtio_intr_disable(dev);
 
 	hw->started = 0;
 	memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..9574498fb 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -57,7 +57,8 @@
  * The remaining space is defined by each driver as the per-driver
  * configuration space.
  */
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+		(((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
 
 static inline int
 check_vq_phys_addr_ok(struct virtqueue *vq)
@@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
 			uint16_t flags = ((uint16_t *)&cap)[1];
 
 			if (flags & PCI_MSIX_ENABLE)
-				hw->use_msix = 1;
+				hw->use_msix = VIRTIO_MSIX_ENABLED;
+			else
+				hw->use_msix = VIRTIO_MSIX_DISABLED;
 		}
 
 		if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
@@ -710,3 +713,39 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
 
 	return 0;
 }
+
+enum virtio_msix_status
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+	uint8_t pos;
+	struct virtio_pci_cap cap;
+	int ret;
+
+	ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+	if (ret < 0) {
+		PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+		return VIRTIO_MSIX_NONE;
+	}
+
+	while (pos) {
+		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+		if (ret < 0) {
+			PMD_INIT_LOG(ERR,
+				"failed to read pci cap at pos: %x", pos);
+			break;
+		}
+
+		if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+			uint16_t flags = ((uint16_t *)&cap)[1];
+
+			if (flags & PCI_MSIX_ENABLE)
+				return VIRTIO_MSIX_ENABLED;
+			else
+				return VIRTIO_MSIX_DISABLED;
+		}
+
+		pos = cap.cap_next;
+	}
+
+	return VIRTIO_MSIX_NONE;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..3c5ce66ce 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,12 @@ struct virtio_net_config {
 /* The alignment to use between consumer and producer parts of vring. */
 #define VIRTIO_PCI_VRING_ALIGN 4096
 
+enum virtio_msix_status {
+	VIRTIO_MSIX_NONE = 0,
+	VIRTIO_MSIX_DISABLED = 1,
+	VIRTIO_MSIX_ENABLED = 2
+};
+
 static inline int
 vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
 {
@@ -339,6 +345,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
 
 uint8_t vtpci_isr(struct virtio_hw *);
 
+enum virtio_msix_status vtpci_msix_detect(struct rte_pci_device *dev);
+
 extern const struct virtio_pci_ops legacy_ops;
 extern const struct virtio_pci_ops modern_ops;
 extern const struct virtio_pci_ops virtio_user_ops;
-- 
2.13.3

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [dpdk-dev] [PATCH v6] net/virtio: fix rxq intr config fails using vfio-pci
  2017-11-09  9:21         ` [dpdk-dev] [PATCH v6] " Zhiyong Yang
@ 2017-11-11 14:34           ` Thomas Monjalon
  0 siblings, 0 replies; 21+ messages in thread
From: Thomas Monjalon @ 2017-11-11 14:34 UTC (permalink / raw)
  To: Zhiyong Yang; +Cc: dev, stable, jianfeng.tan, yliu, maxime.coquelin

09/11/2017 10:21, Zhiyong Yang:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> time. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function "vtpci_msix_detect" to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix.
> use_msix can indicate three different msix status by:
> VIRTIO_MSIX_NONE (0)
> VIRTIO_MSIX_DISABLED (1)
> VIRTIO_MSIX_ENABLED (2)
> 
> CC: stable@dpdk.org
> CC: jianfeng.tan@intel.com
> CC: yliu@fridaylinux.org
> CC: maxime.coquelin@redhat.com
> 
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
> Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>

Applied, thanks

^ permalink raw reply	[flat|nested] 21+ messages in thread

end of thread, other threads:[~2017-11-11 14:34 UTC | newest]

Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-31  9:44 [dpdk-dev] [PATCH] net/virtio: fix use_msix get the wrong value Zhiyong Yang
2017-11-01 15:40 ` Yuanhan Liu
2017-11-02  1:46   ` Yang, Zhiyong
2017-11-02  3:36 ` Tan, Jianfeng
2017-11-08 11:03 ` [dpdk-dev] [PATCH v2] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
2017-11-08 13:52   ` Tan, Jianfeng
2017-11-09  1:28     ` Yang, Zhiyong
2017-11-09  2:11     ` Yang, Zhiyong
2017-11-09  3:31       ` Tan, Jianfeng
2017-11-09  3:18   ` [dpdk-dev] [PATCH v3] " Zhiyong Yang
2017-11-09  3:47     ` Tan, Jianfeng
2017-11-09  4:01       ` Yang, Zhiyong
2017-11-09  4:40         ` Tan, Jianfeng
2017-11-09  4:46     ` [dpdk-dev] [PATCH v4] " Zhiyong Yang
2017-11-09  6:51       ` Tan, Jianfeng
2017-11-09  8:18       ` Maxime Coquelin
2017-11-09  8:55       ` [dpdk-dev] [PATCH v5] " Zhiyong Yang
2017-11-09  9:08         ` Maxime Coquelin
2017-11-09  9:16           ` Yang, Zhiyong
2017-11-09  9:21         ` [dpdk-dev] [PATCH v6] " Zhiyong Yang
2017-11-11 14:34           ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).