From: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
To: jerin.jacobkollanukkaran@cavium.com, gage.eads@intel.com,
harry.van.haaren@intel.com, bruce.richardson@intel.com,
hemant.agrawal@nxp.com, nipun.gupta@nxp.com,
nikhil.rao@intel.com
Cc: dev@dpdk.org, Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH 1/4] app/eventdev: modify ethdev setup to support Tx
Date: Thu, 30 Nov 2017 12:54:03 +0530 [thread overview]
Message-ID: <20171130072406.15605-1-pbhagavatula@caviumnetworks.com> (raw)
Modify ethernet dev setup to support packet transmission and probe
through ethdev tx capabilities.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
This patch set depends on : http://dpdk.org/dev/patchwork/patch/30520
app/test-eventdev/test_perf_common.c | 56 ++++++++++++++++++++----------------
app/test-eventdev/test_perf_common.h | 6 ++++
2 files changed, 38 insertions(+), 24 deletions(-)
diff --git a/app/test-eventdev/test_perf_common.c b/app/test-eventdev/test_perf_common.c
index 873eab9..60965dc 100644
--- a/app/test-eventdev/test_perf_common.c
+++ b/app/test-eventdev/test_perf_common.c
@@ -92,7 +92,7 @@ static int
perf_producer_wrapper(void *arg)
{
RTE_SET_USED(arg);
- struct prod_data *p = arg;
+ struct prod_data *p = arg;
struct test_perf *t = p->t;
/* Launch the producer function only in case of synthetic producer. */
if (t->opt->prod_type == EVT_PROD_TYPE_SYNT)
@@ -126,7 +126,6 @@ total_latency(struct test_perf *t)
return total;
}
-
int
perf_launch_lcores(struct evt_test *test, struct evt_options *opt,
int (*worker)(void *))
@@ -232,7 +231,7 @@ perf_launch_lcores(struct evt_test *test, struct evt_options *opt,
return 0;
}
-static int
+int
perf_event_rx_adapter_setup(struct evt_options *opt, uint8_t stride,
struct rte_event_port_conf prod_conf)
{
@@ -494,9 +493,9 @@ perf_elt_init(struct rte_mempool *mp, void *arg __rte_unused,
int
perf_ethdev_setup(struct evt_test *test, struct evt_options *opt)
{
- uint16_t nb_rx_queues = 1;
int i;
- int j;
+ uint8_t nb_queues = 1;
+ uint8_t mt_state = 0;
struct test_perf *t = evt_test_priv(test);
struct rte_eth_conf port_conf = {
.rxmode = {
@@ -528,33 +527,42 @@ perf_ethdev_setup(struct evt_test *test, struct evt_options *opt)
}
for (i = 0; i < rte_eth_dev_count(); i++) {
+ struct rte_eth_dev_info dev_info;
+
+ memset(&dev_info, 0, sizeof(struct rte_eth_dev_info));
+ rte_eth_dev_info_get(i, &dev_info);
+ mt_state = !(dev_info.tx_offload_capa &
+ DEV_TX_OFFLOAD_MT_LOCKFREE);
- if (rte_eth_dev_configure(i, nb_rx_queues, nb_rx_queues,
+ if (rte_eth_dev_configure(i, nb_queues, nb_queues,
&port_conf)
< 0) {
evt_err("Failed to configure eth port [%d]\n", i);
return -EINVAL;
}
- for (j = 0; j < nb_rx_queues; j++) {
- if (rte_eth_rx_queue_setup(i, j, NB_RX_DESC,
- rte_socket_id(), NULL, t->pool) < 0) {
- evt_err("Failed to setup eth port [%d]"
- " rx_queue: %d."
- " Using synthetic producer\n",
- i, j);
- return -EINVAL;
- }
- if (rte_eth_tx_queue_setup(i, j, NB_TX_DESC,
- rte_socket_id(), NULL) < 0) {
- evt_err("Failed to setup eth port [%d]"
- " tx_queue: %d."
- " Using synthetic producer\n",
- i, j);
- return -EINVAL;
- }
+ if (rte_eth_rx_queue_setup(i, 0, NB_RX_DESC,
+ rte_socket_id(), NULL, t->pool) < 0) {
+ evt_err("Failed to setup eth port [%d]"
+ " rx_queue: %d."
+ " Using synthetic producer\n",
+ i, 0);
+ return -EINVAL;
+ }
+ if (rte_eth_tx_queue_setup(i, 0, NB_TX_DESC,
+ rte_socket_id(), NULL) < 0) {
+ evt_err("Failed to setup eth port [%d]"
+ " tx_queue: %d."
+ " Using synthetic producer\n",
+ i, 0);
+ return -EINVAL;
}
+ t->mt_unsafe |= mt_state;
+ t->tx_buf[i] =
+ rte_malloc(NULL, RTE_ETH_TX_BUFFER_SIZE(BURST_SIZE), 0);
+ if (t->tx_buf[i] == NULL)
+ rte_panic("Unable to allocate Tx buffer memory.");
rte_eth_promiscuous_enable(i);
}
@@ -591,7 +599,7 @@ perf_mempool_setup(struct evt_test *test, struct evt_options *opt)
} else {
t->pool = rte_pktmbuf_pool_create(test->name, /* mempool name */
opt->pool_sz, /* number of elements*/
- 0, /* cache size*/
+ 512, /* cache size*/
0,
RTE_MBUF_DEFAULT_BUF_SIZE,
opt->socket_id); /* flags */
diff --git a/app/test-eventdev/test_perf_common.h b/app/test-eventdev/test_perf_common.h
index 95a2174..a847a75 100644
--- a/app/test-eventdev/test_perf_common.h
+++ b/app/test-eventdev/test_perf_common.h
@@ -45,6 +45,7 @@
#include <rte_malloc.h>
#include <rte_mempool.h>
#include <rte_prefetch.h>
+#include <rte_spinlock.h>
#include "evt_common.h"
#include "evt_options.h"
@@ -74,12 +75,15 @@ struct test_perf {
int done;
uint64_t outstand_pkts;
uint8_t nb_workers;
+ uint8_t mt_unsafe;
enum evt_test_result result;
uint32_t nb_flows;
uint64_t nb_pkts;
struct rte_mempool *pool;
struct prod_data prod[EVT_MAX_PORTS];
struct worker_data worker[EVT_MAX_PORTS];
+ struct rte_eth_dev_tx_buffer *tx_buf[RTE_MAX_ETHPORTS];
+ rte_spinlock_t tx_lk[RTE_MAX_ETHPORTS];
struct evt_options *opt;
uint8_t sched_type_list[EVT_MAX_STAGES] __rte_cache_aligned;
} __rte_cache_aligned;
@@ -159,6 +163,8 @@ int perf_test_result(struct evt_test *test, struct evt_options *opt);
int perf_opt_check(struct evt_options *opt, uint64_t nb_queues);
int perf_test_setup(struct evt_test *test, struct evt_options *opt);
int perf_ethdev_setup(struct evt_test *test, struct evt_options *opt);
+int perf_event_rx_adapter_setup(struct evt_options *opt, uint8_t stride,
+ struct rte_event_port_conf prod_conf);
int perf_mempool_setup(struct evt_test *test, struct evt_options *opt);
int perf_event_dev_port_setup(struct evt_test *test, struct evt_options *opt,
uint8_t stride, uint8_t nb_queues);
--
2.7.4
next reply other threads:[~2017-11-30 7:24 UTC|newest]
Thread overview: 122+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-30 7:24 Pavan Nikhilesh [this message]
2017-11-30 7:24 ` [dpdk-dev] [PATCH 2/4] app/eventdev: add packet distribution logs Pavan Nikhilesh
2017-12-10 12:31 ` Jerin Jacob
2017-11-30 7:24 ` [dpdk-dev] [PATCH 3/4] app/eventdev: add perf pipeline test Pavan Nikhilesh
2017-11-30 17:15 ` Eads, Gage
2017-12-01 5:19 ` Pavan Nikhilesh Bhagavatula
2017-12-10 12:33 ` Jerin Jacob
2017-12-11 15:20 ` Pavan Nikhilesh Bhagavatula
2017-12-11 15:45 ` Jerin Jacob
2017-11-30 7:24 ` [dpdk-dev] [PATCH 4/4] doc: add perf pipeline test in eventdev test guide Pavan Nikhilesh
2017-12-18 21:43 ` [dpdk-dev] [PATCH v2 01/12] app/eventdev: add packet distribution logs Pavan Nikhilesh
2017-12-18 21:43 ` [dpdk-dev] [PATCH v2 02/12] app/eventdev: add pipeline test setup and destroy Pavan Nikhilesh
2018-01-08 14:04 ` Jerin Jacob
2017-12-18 21:43 ` [dpdk-dev] [PATCH v2 03/12] app/eventdev: add mempool " Pavan Nikhilesh
2018-01-08 14:06 ` Jerin Jacob
2017-12-18 21:43 ` [dpdk-dev] [PATCH v2 04/12] app/eventdev: add pipeline opt dump and check functions Pavan Nikhilesh
2017-12-18 21:43 ` [dpdk-dev] [PATCH v2 05/12] app/eventdev: add perf ethport setup and destroy Pavan Nikhilesh
2018-01-08 14:10 ` Jerin Jacob
2017-12-18 21:43 ` [dpdk-dev] [PATCH v2 06/12] app/eventdev: add event port setup and Rx adapter setup Pavan Nikhilesh
2017-12-18 21:44 ` [dpdk-dev] [PATCH v2 07/12] app/eventdev: launch pipeline lcores Pavan Nikhilesh
2017-12-18 21:44 ` [dpdk-dev] [PATCH v2 08/12] app/eventdev: add pipeline queue test Pavan Nikhilesh
2017-12-18 21:44 ` [dpdk-dev] [PATCH v2 09/12] app/eventdev: add pipeline queue worker functions Pavan Nikhilesh
2017-12-18 21:44 ` [dpdk-dev] [PATCH v2 10/12] app/eventdev: add pipeline atq test Pavan Nikhilesh
2018-01-08 14:15 ` Jerin Jacob
2017-12-18 21:44 ` [dpdk-dev] [PATCH v2 11/12] app/eventdev: add pipeline atq worker functions Pavan Nikhilesh
2017-12-18 21:44 ` [dpdk-dev] [PATCH v2 12/12] doc: add pipeline test in eventdev test guide Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 01/12] app/eventdev: add packet distribution logs Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 02/12] app/eventdev: add pipeline test setup and destroy Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 03/12] app/eventdev: add mempool " Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 04/12] app/eventdev: add pipeline opt dump and check functions Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 05/12] app/eventdev: add perf ethport setup and destroy Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 06/12] app/eventdev: add event port setup and Rx adapter setup Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 07/12] app/eventdev: launch pipeline lcores Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 08/12] app/eventdev: add pipeline queue test Pavan Nikhilesh
2018-01-10 16:38 ` Van Haaren, Harry
2018-01-10 20:01 ` Pavan Nikhilesh
2018-01-15 10:17 ` Van Haaren, Harry
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 09/12] app/eventdev: add pipeline queue worker functions Pavan Nikhilesh
2018-01-10 16:45 ` Van Haaren, Harry
2018-01-10 16:53 ` Van Haaren, Harry
2018-01-10 20:17 ` Pavan Nikhilesh
2018-01-11 12:17 ` Van Haaren, Harry
2018-01-11 13:52 ` Pavan Nikhilesh
2018-01-11 15:47 ` Van Haaren, Harry
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 10/12] app/eventdev: add pipeline atq test Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 11/12] app/eventdev: add pipeline atq worker functions Pavan Nikhilesh
2018-01-10 14:51 ` [dpdk-dev] [PATCH v3 12/12] doc: add pipeline test in eventdev test guide Pavan Nikhilesh
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 01/13] app/eventdev: add packet distribution logs Pavan Nikhilesh
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 02/13] app/eventdev: add pipeline test setup and destroy Pavan Nikhilesh
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 03/13] app/eventdev: add mempool " Pavan Nikhilesh
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 04/13] app/eventdev: add pipeline opt dump and check functions Pavan Nikhilesh
2018-01-16 11:54 ` Van Haaren, Harry
2018-01-17 17:19 ` Jerin Jacob
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 05/13] app/eventdev: add pipeline ethport setup and destroy Pavan Nikhilesh
2018-01-16 11:54 ` Van Haaren, Harry
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 06/13] app/eventdev: add event port setup and Rx adapter setup Pavan Nikhilesh
2018-01-16 11:54 ` Van Haaren, Harry
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 07/13] app/eventdev: add Tx service setup Pavan Nikhilesh
2018-01-16 11:57 ` Van Haaren, Harry
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 08/13] app/eventdev: launch pipeline lcores Pavan Nikhilesh
2018-01-16 11:57 ` Van Haaren, Harry
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 09/13] app/eventdev: add pipeline queue test Pavan Nikhilesh
2018-01-16 11:58 ` Van Haaren, Harry
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 10/13] app/eventdev: add pipeline queue worker functions Pavan Nikhilesh
2018-01-16 12:05 ` Van Haaren, Harry
2018-01-16 12:31 ` Pavan Nikhilesh
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 11/13] app/eventdev: add pipeline atq test Pavan Nikhilesh
2018-01-16 12:06 ` Van Haaren, Harry
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 12/13] app/eventdev: add pipeline atq worker functions Pavan Nikhilesh
2018-01-16 12:06 ` Van Haaren, Harry
2018-01-12 16:44 ` [dpdk-dev] [PATCH v4 13/13] doc: add pipeline test in eventdev test guide Pavan Nikhilesh
2018-01-15 11:16 ` Kovacevic, Marko
2018-01-15 16:16 ` Jerin Jacob
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 01/14] app/eventdev: add packet distribution logs Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 02/14] app/eventdev: add pipeline test setup and destroy Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 03/14] app/eventdev: add mempool " Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 04/14] app/eventdev: add pipeline opt dump and check functions Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 05/14] app/eventdev: add pipeline ethport setup and destroy Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 06/14] app/eventdev: add event port setup and Rx adapter setup Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 07/14] app/eventdev: add Tx service setup Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 08/14] app/eventdev: launch pipeline lcores Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 09/14] app/eventdev: add pipeline queue test Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 10/14] app/eventdev: add pipeline queue worker functions Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 11/14] app/eventdev: add pipeline atq test Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 12/14] app/eventdev: add pipeline atq worker functions Pavan Nikhilesh
2018-01-16 15:17 ` [dpdk-dev] [PATCH v5 13/14] doc: add pipeline test in eventdev test guide Pavan Nikhilesh
2018-01-16 15:20 ` [dpdk-dev] [PATCH v5 14/14] doc: update 18.02 release notes Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 01/14] app/eventdev: add packet distribution logs Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 02/14] app/eventdev: add pipeline test setup and destroy Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 03/14] app/eventdev: add mempool " Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 04/14] app/eventdev: add pipeline opt dump and check functions Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 05/14] app/eventdev: add pipeline ethport setup and destroy Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 06/14] app/eventdev: add event port setup and Rx adapter setup Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 07/14] app/eventdev: add Tx service setup Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 08/14] app/eventdev: launch pipeline lcores Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 09/14] app/eventdev: add pipeline queue test Pavan Nikhilesh
2018-01-16 15:39 ` [dpdk-dev] [PATCH v6 10/14] app/eventdev: add pipeline queue worker functions Pavan Nikhilesh
2018-01-16 15:40 ` [dpdk-dev] [PATCH v6 11/14] app/eventdev: add pipeline atq test Pavan Nikhilesh
2018-01-16 15:40 ` [dpdk-dev] [PATCH v6 12/14] app/eventdev: add pipeline atq worker functions Pavan Nikhilesh
2018-01-16 15:40 ` [dpdk-dev] [PATCH v6 13/14] doc: add pipeline test in eventdev test guide Pavan Nikhilesh
2018-01-16 15:40 ` [dpdk-dev] [PATCH v6 14/14] doc: update 18.02 release notes Pavan Nikhilesh
2018-01-16 16:04 ` Mcnamara, John
2018-01-16 17:51 ` Pavan Nikhilesh
2018-01-16 17:45 ` [dpdk-dev] [PATCH v7 01/15] app/eventdev: add packet distribution logs Pavan Nikhilesh
2018-01-16 17:45 ` [dpdk-dev] [PATCH v7 02/15] app/eventdev: add pipeline test setup and destroy Pavan Nikhilesh
2018-01-16 17:45 ` [dpdk-dev] [PATCH v7 03/15] app/eventdev: add mempool " Pavan Nikhilesh
2018-01-16 17:45 ` [dpdk-dev] [PATCH v7 04/15] app/eventdev: add pipeline opt dump and check functions Pavan Nikhilesh
2018-01-16 17:45 ` [dpdk-dev] [PATCH v7 05/15] app/eventdev: add pipeline ethport setup and destroy Pavan Nikhilesh
2018-01-16 17:45 ` [dpdk-dev] [PATCH v7 06/15] app/eventdev: add event port setup and Rx adapter setup Pavan Nikhilesh
2018-01-16 17:45 ` [dpdk-dev] [PATCH v7 07/15] app/eventdev: add Tx service setup Pavan Nikhilesh
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 08/15] app/eventdev: launch pipeline lcores Pavan Nikhilesh
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 09/15] app/eventdev: add pipeline queue test Pavan Nikhilesh
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 10/15] app/eventdev: add pipeline queue worker functions Pavan Nikhilesh
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 11/15] app/eventdev: add pipeline atq test Pavan Nikhilesh
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 12/15] app/eventdev: add pipeline atq worker functions Pavan Nikhilesh
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 13/15] doc: add pipeline queue test in eventdev test guide Pavan Nikhilesh
[not found] ` <CY4PR07MB3464D865D1B9CA42596A242380E90@CY4PR07MB3464.namprd07.prod.outlook.com>
2018-01-17 17:12 ` Mcnamara, John
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 14/15] doc: add pipeline atq " Pavan Nikhilesh
[not found] ` <CY4PR07MB346409AFA54FC1836195EA0A80E90@CY4PR07MB3464.namprd07.prod.outlook.com>
2018-01-17 17:12 ` Mcnamara, John
2018-01-16 17:46 ` [dpdk-dev] [PATCH v7 15/15] doc: update 18.02 release notes Pavan Nikhilesh
2018-01-17 5:47 ` [dpdk-dev] Fw: " Bhagavatula, Pavan
2018-01-17 17:14 ` [dpdk-dev] " Mcnamara, John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171130072406.15605-1-pbhagavatula@caviumnetworks.com \
--to=pbhagavatula@caviumnetworks.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gage.eads@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerin.jacobkollanukkaran@cavium.com \
--cc=nikhil.rao@intel.com \
--cc=nipun.gupta@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).