DPDK patches and discussions
 help / color / mirror / Atom feed
From: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
To: gage.eads@intel.com, jerin.jacobkollanukkaran@cavium.com,
	harry.van.haaren@intel.com, nikhil.rao@intel.com,
	hemant.agrawal@nxp.com, liang.j.ma@intel.com
Cc: dev@dpdk.org, Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH 09/13] examples/eventdev: add all type queue option
Date: Fri,  8 Dec 2017 02:07:01 +0530	[thread overview]
Message-ID: <20171207203705.25020-10-pbhagavatula@caviumnetworks.com> (raw)
In-Reply-To: <20171207203705.25020-1-pbhagavatula@caviumnetworks.com>

Added configurable option to make queue type as all type queues i.e.
RTE_EVENT_QUEUE_CFG_ALL_TYPES based on event dev capability
RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES.

This can be enabled by supplying '-a' as a cmdline argument.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 examples/eventdev_pipeline_sw_pmd/main.c           |   7 +-
 .../eventdev_pipeline_sw_pmd/pipeline_common.h     |   1 +
 .../pipeline_worker_generic.c                      |   5 +
 .../eventdev_pipeline_sw_pmd/pipeline_worker_tx.c  | 134 +++++++++++++++++++--
 4 files changed, 139 insertions(+), 8 deletions(-)

diff --git a/examples/eventdev_pipeline_sw_pmd/main.c b/examples/eventdev_pipeline_sw_pmd/main.c
index 3be981c15..289f7204d 100644
--- a/examples/eventdev_pipeline_sw_pmd/main.c
+++ b/examples/eventdev_pipeline_sw_pmd/main.c
@@ -149,6 +149,7 @@ static struct option long_options[] = {
 	{"parallel", no_argument, 0, 'p'},
 	{"ordered", no_argument, 0, 'o'},
 	{"quiet", no_argument, 0, 'q'},
+	{"use-atq", no_argument, 0, 'a'},
 	{"dump", no_argument, 0, 'D'},
 	{0, 0, 0, 0}
 };
@@ -172,6 +173,7 @@ usage(void)
 		"  -o, --ordered                Use ordered scheduling\n"
 		"  -p, --parallel               Use parallel scheduling\n"
 		"  -q, --quiet                  Minimize printed output\n"
+		"  -a, --use-atq                Use all type queues\n"
 		"  -D, --dump                   Print detailed statistics before exit"
 		"\n";
 	fprintf(stderr, "%s", usage_str);
@@ -192,7 +194,7 @@ parse_app_args(int argc, char **argv)
 	int i;
 
 	for (;;) {
-		c = getopt_long(argc, argv, "r:t:e:c:w:n:f:s:poPqDW:",
+		c = getopt_long(argc, argv, "r:t:e:c:w:n:f:s:paoPqDW:",
 				long_options, &option_index);
 		if (c == -1)
 			break;
@@ -225,6 +227,9 @@ parse_app_args(int argc, char **argv)
 		case 'p':
 			cdata.queue_type = RTE_SCHED_TYPE_PARALLEL;
 			break;
+		case 'a':
+			cdata.all_type_queues = 1;
+			break;
 		case 'q':
 			cdata.quiet = 1;
 			break;
diff --git a/examples/eventdev_pipeline_sw_pmd/pipeline_common.h b/examples/eventdev_pipeline_sw_pmd/pipeline_common.h
index 0b27d1eb0..62755f6d0 100644
--- a/examples/eventdev_pipeline_sw_pmd/pipeline_common.h
+++ b/examples/eventdev_pipeline_sw_pmd/pipeline_common.h
@@ -106,6 +106,7 @@ struct config_data {
 	int quiet;
 	int dump_dev;
 	int dump_dev_signal;
+	int all_type_queues;
 	unsigned int num_stages;
 	unsigned int worker_cq_depth;
 	unsigned int rx_stride;
diff --git a/examples/eventdev_pipeline_sw_pmd/pipeline_worker_generic.c b/examples/eventdev_pipeline_sw_pmd/pipeline_worker_generic.c
index 5998aae95..908d64c87 100644
--- a/examples/eventdev_pipeline_sw_pmd/pipeline_worker_generic.c
+++ b/examples/eventdev_pipeline_sw_pmd/pipeline_worker_generic.c
@@ -525,6 +525,11 @@ generic_opt_check(void)
 	memset(&eventdev_info, 0, sizeof(struct rte_event_dev_info));
 	rte_event_dev_info_get(0, &eventdev_info);
 
+	if (cdata.all_type_queues && !(eventdev_info.event_dev_cap &
+				RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES))
+		rte_exit(EXIT_FAILURE,
+				"Event dev doesn't support all type queues\n");
+
 	for (i = 0; i < rte_eth_dev_count(); i++) {
 		ret = rte_event_eth_rx_adapter_caps_get(0, i, &cap);
 		if (ret)
diff --git a/examples/eventdev_pipeline_sw_pmd/pipeline_worker_tx.c b/examples/eventdev_pipeline_sw_pmd/pipeline_worker_tx.c
index a824f1f49..e25a06027 100644
--- a/examples/eventdev_pipeline_sw_pmd/pipeline_worker_tx.c
+++ b/examples/eventdev_pipeline_sw_pmd/pipeline_worker_tx.c
@@ -119,6 +119,51 @@ worker_do_tx(void *arg)
 	return 0;
 }
 
+static int
+worker_do_tx_atq(void *arg)
+{
+	struct rte_event ev;
+
+	struct worker_data *data = (struct worker_data *)arg;
+	const uint8_t dev = data->dev_id;
+	const uint8_t port = data->port_id;
+	const uint8_t lst_qid = cdata.num_stages - 1;
+	size_t fwd = 0, received = 0, tx = 0;
+
+	while (!fdata->done) {
+
+		if (!rte_event_dequeue_burst(dev, port, &ev, 1, 0)) {
+			rte_pause();
+			continue;
+		}
+
+		received++;
+		const uint8_t cq_id = ev.queue_id % cdata.num_stages;
+
+		if (cq_id == lst_qid) {
+			if (ev.sched_type == RTE_SCHED_TYPE_ATOMIC) {
+				worker_tx_pkt(ev.mbuf);
+				tx++;
+				continue;
+			}
+			worker_fwd_event(&ev, RTE_SCHED_TYPE_ATOMIC);
+		} else {
+			ev.queue_id = cdata.next_qid[ev.queue_id];
+			worker_fwd_event(&ev, cdata.queue_type);
+		}
+		work(ev.mbuf);
+
+		worker_event_enqueue(dev, port, &ev);
+		fwd++;
+	}
+
+	if (!cdata.quiet)
+		printf("  worker %u thread done. RX=%zu FWD=%zu TX=%zu\n",
+				rte_lcore_id(), received, fwd, tx);
+
+	return 0;
+}
+
 static int
 worker_do_tx_burst(void *arg)
 {
@@ -178,6 +223,61 @@ worker_do_tx_burst(void *arg)
 	return 0;
 }
 
+static int
+worker_do_tx_burst_atq(void *arg)
+{
+	struct rte_event ev[BATCH_SIZE];
+
+	struct worker_data *data = (struct worker_data *)arg;
+	uint8_t dev = data->dev_id;
+	uint8_t port = data->port_id;
+	uint8_t lst_qid = cdata.num_stages - 1;
+	size_t fwd = 0, received = 0, tx = 0;
+
+	while (!fdata->done) {
+		uint16_t i;
+
+		const uint16_t nb_rx = rte_event_dequeue_burst(dev, port,
+				ev, BATCH_SIZE, 0);
+
+		if (nb_rx == 0) {
+			rte_pause();
+			continue;
+		}
+		received += nb_rx;
+
+		for (i = 0; i < nb_rx; i++) {
+			const uint8_t cq_id = ev[i].queue_id % cdata.num_stages;
+
+			if (cq_id == lst_qid) {
+				if (ev[i].sched_type ==
+						RTE_SCHED_TYPE_ATOMIC) {
+					worker_tx_pkt(ev[i].mbuf);
+					tx++;
+					ev[i].op = RTE_EVENT_OP_RELEASE;
+					continue;
+				}
+				worker_fwd_event(&ev[i],
+						RTE_SCHED_TYPE_ATOMIC);
+			} else {
+				ev[i].queue_id = cdata.next_qid[
+					ev[i].queue_id];
+				worker_fwd_event(&ev[i],
+						cdata.queue_type);
+			}
+		}
+
+		worker_event_enqueue_burst(dev, port, ev, nb_rx);
+		fwd += nb_rx;
+	}
+
+	if (!cdata.quiet)
+		printf("  worker %u thread done. RX=%zu FWD=%zu TX=%zu\n",
+				rte_lcore_id(), received, fwd, tx);
+
+	return 0;
+}
+
 static int
 setup_eventdev_w(struct prod_data *prod_data,
 		struct cons_data *cons_data,
@@ -186,10 +286,12 @@ setup_eventdev_w(struct prod_data *prod_data,
 	RTE_SET_USED(prod_data);
 	RTE_SET_USED(cons_data);
 	uint8_t i;
+	const uint8_t atq = cdata.all_type_queues ? 1 : 0;
 	const uint8_t dev_id = 0;
 	const uint8_t nb_ports = cdata.num_workers;
 	uint8_t nb_slots = 0;
 	uint8_t nb_queues = rte_eth_dev_count() * cdata.num_stages;
+	nb_queues +=  atq ? 0 : rte_eth_dev_count();
 
 	struct rte_event_dev_config config = {
 			.nb_event_queues = nb_queues,
@@ -241,12 +343,19 @@ setup_eventdev_w(struct prod_data *prod_data,
 	printf("  Stages:\n");
 	for (i = 0; i < nb_queues; i++) {
 
-		uint8_t slot;
+		if (atq) {
+
+			nb_slots = cdata.num_stages;
+			wkr_q_conf.event_queue_cfg =
+				RTE_EVENT_QUEUE_CFG_ALL_TYPES;
+		} else {
+			uint8_t slot;
 
-		nb_slots = cdata.num_stages + 1;
-		slot = i % nb_slots;
-		wkr_q_conf.schedule_type = slot == cdata.num_stages ?
-			RTE_SCHED_TYPE_ATOMIC : cdata.queue_type;
+			nb_slots = cdata.num_stages + 1;
+			slot = i % nb_slots;
+			wkr_q_conf.schedule_type = slot == cdata.num_stages ?
+				RTE_SCHED_TYPE_ATOMIC : cdata.queue_type;
+		}
 
 		if (rte_event_queue_setup(dev_id, i, &wkr_q_conf) < 0) {
 			printf("%d: error creating qid %d\n", __LINE__, i);
@@ -464,6 +573,11 @@ opt_check(void)
 	memset(&eventdev_info, 0, sizeof(struct rte_event_dev_info));
 	rte_event_dev_info_get(0, &eventdev_info);
 
+	if (cdata.all_type_queues && !(eventdev_info.event_dev_cap &
+				RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES))
+		rte_exit(EXIT_FAILURE,
+				"Event dev doesn't support all type queues\n");
+
 	for (i = 0; i < rte_eth_dev_count(); i++) {
 		ret = rte_event_eth_rx_adapter_caps_get(0, i, &cap);
 		if (ret)
@@ -494,9 +608,15 @@ opt_check(void)
 void
 set_worker_tx_setup_data(struct setup_data *caps, bool burst)
 {
-	if (burst)
+	uint8_t atq = cdata.all_type_queues ? 1 : 0;
+
+	if (burst && atq)
+		caps->worker_loop = worker_do_tx_burst_atq;
+	if (burst && !atq)
 		caps->worker_loop = worker_do_tx_burst;
-	if (!burst)
+	if (!burst && atq)
+		caps->worker_loop = worker_do_tx_atq;
+	if (!burst && !atq)
 		caps->worker_loop = worker_do_tx;
 
 	caps->opt_check = opt_check;
-- 
2.14.1

  parent reply	other threads:[~2017-12-07 20:39 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-07 20:36 [dpdk-dev] [PATCH 00/13] examples/eventdev: add capability based pipeline support Pavan Nikhilesh
2017-12-07 20:36 ` [dpdk-dev] [PATCH 01/13] examples/eventdev: add Rx adapter support Pavan Nikhilesh
2017-12-11 16:15   ` Eads, Gage
2017-12-12  8:17     ` Pavan Nikhilesh Bhagavatula
2017-12-12 15:59       ` Eads, Gage
2017-12-07 20:36 ` [dpdk-dev] [PATCH 02/13] examples/eventdev: move common data into pipeline common Pavan Nikhilesh
2017-12-11 16:15   ` Eads, Gage
2017-12-12  8:19     ` Pavan Nikhilesh Bhagavatula
2017-12-07 20:36 ` [dpdk-dev] [PATCH 03/13] examples/eventdev: add framework for caps based pipeline Pavan Nikhilesh
2017-12-07 20:36 ` [dpdk-dev] [PATCH 04/13] examples/eventdev: add generic worker pipeline Pavan Nikhilesh
2017-12-07 20:36 ` [dpdk-dev] [PATCH 05/13] examples/eventdev: add ops to check cmdline args Pavan Nikhilesh
2017-12-19 11:23   ` Van Haaren, Harry
2017-12-07 20:36 ` [dpdk-dev] [PATCH 06/13] examples/eventdev: add non burst mode generic worker Pavan Nikhilesh
2017-12-19 13:26   ` Van Haaren, Harry
2017-12-19 19:01     ` Pavan Nikhilesh
2017-12-07 20:36 ` [dpdk-dev] [PATCH 07/13] examples/eventdev: add thread safe Tx worker pipeline Pavan Nikhilesh
2017-12-19 12:00   ` Van Haaren, Harry
2017-12-19 18:55     ` Pavan Nikhilesh
2017-12-07 20:37 ` [dpdk-dev] [PATCH 08/13] examples/eventdev: add burst for thread safe pipeline Pavan Nikhilesh
2017-12-07 20:37 ` Pavan Nikhilesh [this message]
2017-12-19 13:18   ` [dpdk-dev] [PATCH 09/13] examples/eventdev: add all type queue option Van Haaren, Harry
2017-12-19 19:05     ` Pavan Nikhilesh
2017-12-07 20:37 ` [dpdk-dev] [PATCH 10/13] examples/eventdev: add single stage pipeline worker Pavan Nikhilesh
2017-12-11 16:45   ` Eads, Gage
2017-12-07 20:37 ` [dpdk-dev] [PATCH 11/13] examples/eventdev: add atq " Pavan Nikhilesh
2017-12-19 13:34   ` Van Haaren, Harry
2017-12-07 20:37 ` [dpdk-dev] [PATCH 12/13] examples/eventdev_pipeline_sw_pmd: rename example Pavan Nikhilesh
2017-12-07 20:37 ` [dpdk-dev] [PATCH 13/13] doc: update example eventdev_pipeline Pavan Nikhilesh
2017-12-11 11:29   ` Laatz, Kevin
2018-01-10 11:09 ` [dpdk-dev] [PATCH v2 01/15] examples/eventdev: add Rx adapter support Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 02/15] examples/eventdev: move common data into pipeline common Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 03/15] examples/eventdev: add framework for caps based pipeline Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 04/15] examples/eventdev: add generic worker pipeline Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 05/15] examples/eventdev: add ops to check cmdline args Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 06/15] examples/eventdev: add non burst mode generic worker Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 07/15] examples/eventdev: modify work cycles Pavan Nikhilesh
2018-01-15 10:14     ` Van Haaren, Harry
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 08/15] examples/eventdev: add thread safe Tx worker pipeline Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 09/15] examples/eventdev: add burst for thread safe pipeline Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 10/15] examples/eventdev: add all type queue option Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 11/15] examples/eventdev: add single stage pipeline worker Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 12/15] examples/eventdev: add atq " Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 13/15] examples/eventdev: add mempool size configuration Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 14/15] examples/eventdev_pipeline_sw_pmd: rename example Pavan Nikhilesh
2018-01-10 11:10   ` [dpdk-dev] [PATCH v2 15/15] doc: update example eventdev pipeline Pavan Nikhilesh
2018-01-16 11:34     ` Kovacevic, Marko
2018-01-16 10:35   ` [dpdk-dev] [PATCH v2 01/15] examples/eventdev: add Rx adapter support Van Haaren, Harry
2018-01-16 16:12     ` Jerin Jacob

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171207203705.25020-10-pbhagavatula@caviumnetworks.com \
    --to=pbhagavatula@caviumnetworks.com \
    --cc=dev@dpdk.org \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerin.jacobkollanukkaran@cavium.com \
    --cc=liang.j.ma@intel.com \
    --cc=nikhil.rao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).