DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [RFC] eventdev: add crypto adapter API header
@ 2017-11-09  6:54 Abhinandan Gujjar
  2017-11-29 11:41 ` Jerin Jacob
  0 siblings, 1 reply; 14+ messages in thread
From: Abhinandan Gujjar @ 2017-11-09  6:54 UTC (permalink / raw)
  To: jerin.jacob
  Cc: dev, narender.vangati, Abhinandan Gujjar, Nikhil Rao, Gage Eads

Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
---
 lib/librte_eventdev/Makefile                   |   1 +
 lib/librte_eventdev/rte_event_crypto_adapter.h | 474 +++++++++++++++++++++++++
 2 files changed, 475 insertions(+)
 create mode 100644 lib/librte_eventdev/rte_event_crypto_adapter.h

diff --git a/lib/librte_eventdev/Makefile b/lib/librte_eventdev/Makefile
index 5ac22cd..9cbe1a6 100644
--- a/lib/librte_eventdev/Makefile
+++ b/lib/librte_eventdev/Makefile
@@ -53,6 +53,7 @@ SYMLINK-y-include += rte_eventdev_pmd_pci.h
 SYMLINK-y-include += rte_eventdev_pmd_vdev.h
 SYMLINK-y-include += rte_event_ring.h
 SYMLINK-y-include += rte_event_eth_rx_adapter.h
+SYMLINK-y-include += rte_event_crypto_adapter.h
 
 # versioning export map
 EXPORT_MAP := rte_eventdev_version.map
diff --git a/lib/librte_eventdev/rte_event_crypto_adapter.h b/lib/librte_eventdev/rte_event_crypto_adapter.h
new file mode 100644
index 0000000..080c3ed
--- /dev/null
+++ b/lib/librte_eventdev/rte_event_crypto_adapter.h
@@ -0,0 +1,474 @@
+/*
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_EVENT_CRYPTO_ADAPTER_
+#define _RTE_EVENT_CRYPTO_ADAPTER_
+
+/**
+ * This adapter adds support to enqueue crypto completion to event device.
+ * The packet flow from cryptodev to the event device can be accomplished
+ * using either HW or SW mechanisms.
+ * The adapter uses a EAL service core function for SW based packet transfer
+ * and uses the eventdev PMD functions to configure HW based packet transfer
+ * between the cryptodev and the event device.
+ *
+ * The event crypto adapter provides common APIs to configure the packet flow
+ * from the cryptodev to event devices on both HW and SW.
+ * The crypto event adapter's functions are:
+ *  - rte_event_crypto_adapter_create_ext()
+ *  - rte_event_crypto_adapter_create()
+ *  - rte_event_crypto_adapter_free()
+ *  - rte_event_crypto_adapter_queue_pair_add()
+ *  - rte_event_crypto_adapter_queue_pair_del()
+ *  - rte_event_crypto_adapter_start()
+ *  - rte_event_crypto_adapter_stop()
+ *  - rte_event_crypto_adapter_stats_get()
+ *  - rte_event_crypto_adapter_stats_reset()
+
+ * The applicaton creates an instance using rte_event_crypto_adapter_create()
+ * or rte_event_crypto_adapter_create_ext().
+ *
+ * Cryptodev queue pair addition/deletion is done
+ * using rte_event_crypto_adapter_queue_pair_xxx() API.
+ *
+ * Adapter uses rte_event_crypto_queue_pair_conf to decide whether the event
+ * enqueue is based on RTE_EVENT_CRYPTO_ENQ_MULTI_EVENTQ or
+ * RTE_EVENT_CRYPTO_ENQ_MBUF_MULTI_EVENTQ.
+ * In case of RTE_EVENT_CRYPTO_ENQ_MULTI_EVENTQ,
+ * rte_event_crypto_queue_pair_conf::ev will be used for event enqueue.
+ * In case of RTE_EVENT_CRYPTO_ENQ_MBUF_MULTI_EVENTQ,
+ * members of rte_event_crypto_metadata will be used for event enqueue.
+ *
+ * The metadata offset is used to configure the location of the
+ * rte_event_crypto_metadata structure within the mbuf's private metadata area.
+ *
+ * When the application sends crypto operations to the adapter,
+ * the crypto queue pair identifier needs to be specified, similarly eventdev
+ * parameters such as the flow id, scheduling type etc are needed by the
+ * adapter when it enqueues mbufs from completed crypto operations to eventdev.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <rte_service.h>
+
+#include "rte_eventdev.h"
+
+#define RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE 32
+
+ /**
+ * @warning
+ * @b EXPERIMENTAL: this enum may change without prior notice
+ *
+ * Crypto event queue conf type
+ */
+enum rte_event_crypto_conf_type {
+	RTE_EVENT_CRYPTO_CONF_TYPE_EVENT = 1,
+	/**< Refer RTE_EVENT_CRYPTO_ADAPTER_CAP_MULTI_EVENTQ */
+	RTE_EVENT_CRYPTO_CONF_TYPE_MBUF,
+	/**< Refer RTE_EVENT_CRYPTO_ADAPTER_CAP_MBUF_MULTI_EVENTQ */
+	RTE_EVENT_CRYPTO_CONF_TYPE_MAX
+};
+
+ /**
+ * @warning
+ * @b EXPERIMENTAL: this enum may change without prior notice
+ *
+ * Crypto event adapter type
+ */
+enum rte_event_crypto_adapter_type {
+	RTE_EVENT_CRYPTO_ADAPTER_RX_ONLY = 1,
+	/**< Start only Rx part of crypto adapter.
+	* Packets dequeued from cryptodev are new to eventdev and
+	* events will be treated as RTE_EVENT_OP_NEW */
+	RTE_EVENT_CRYPTO_ADAPTER_RX_TX,
+	/**< Start both Rx & Tx part of crypto adapter.
+	* Packet's event context will be retained and
+	* event will be treated as RTE_EVENT_OP_FORWARD */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * Adapter configuration structure that the adapter configuration callback
+ * function is expected to fill out
+ * @see rte_event_crypto_adapter_conf_cb
+ */
+struct rte_event_crypto_adapter_conf {
+	uint8_t event_port_id;
+	/**< Event port identifier, the adapter enqueues mbuf events to this
+	 * port.
+	 */
+	uint32_t max_nb;
+	/**< The adapter can return early if it has processed at least
+	 * max_nb mbufs. This isn't treated as a requirement; batching may
+	 * cause the adapter to process more than max_nb mbufs.
+	 */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * Crypto event metadata structure
+ */
+struct rte_event_crypto_metadata {
+	union {
+		uint64_t u64;
+		/**< Opaque 64-bit value */
+		struct rte_crypto_op *crypto_op;
+		/**< pointer to struct rte_crypto_op */
+	}
+	uint32_t flow_id:20;
+	/**< eventdev flow identifier */
+	uint32_t sub_event_type:8;
+	/**< eventdev sub-event type */
+	uint32_t sched_type:2;
+	/**< eventdev scheduling type */
+	uint16_t event_qid;
+	/**< eventdev queue identifier */
+	uint16_t cryptodev_qp_id;
+	/**< crypto queue pair index */
+	uint8_t priority;
+	/**< eventdev priority */
+	uint8_t reserved[15];
+	/**< Bytes reserved for future extension */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Function type used for adapter configuration callback. The callback is
+ * used to fill in members of the struct rte_event_crypto_adapter_conf, this
+ * callback is invoked when creating a SW service for packet transfer from
+ * cryptodev queue pair to the event device. The SW service is created within
+ * the rte_event_crypto_adapter_queue_add() function if SW based packet
+ * transfers from cryptodev queue pair to the event device are required.
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @param dev_id
+ *  Event device identifier.
+ *
+ * @param [out] conf
+ *  Structure that needs to be populated by this callback.
+ *
+ * @param arg
+ *  Argument to the callback. This is the same as the conf_arg passed to the
+ *  rte_event_crypto_adapter_create_ext().
+ */
+typedef int (*rte_event_crypto_adapter_conf_cb) (uint8_t id, uint8_t cdev_id,
+			struct rte_event_crypto_adapter_conf *conf,
+			void *arg);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * Queue pair configuration structure
+ */
+struct rte_event_crypto_queue_pair_conf {
+	enum rte_event_crypto_conf_type type;
+	/**< Flags for handling received packets */
+	union {
+		uint32_t mbuf_metadata_offset;
+		/**<
+		* The metadata offset indicates the location of the
+		* rte_event_crypto_metadata structure within the mbuf's
+		* private metadata area.
+		*/
+		struct rte_event ev;
+		/**<
+		* When queuing is set to RTE_EVENT_CRYPTO_ENQ_MULTI_EVENTQ
+		* the values from the following event fields will be used for
+		*  queuing mbuf events:
+		*   - queue_id: Targeted event queue ID for received packets.
+		*   - priority: Event priority of packets from this queue in
+		*                the event queue relative to other events.
+		*   - sched_type: Scheduling type for packets from this queue
+		*                  pair.
+		*   - flow_id: Identifier indicating the packet flow.
+		*   - sub_event_type: Sub event type for received packets
+		*
+		* The event adapter sets ev.event_type to RTE_EVENT_TYPE_CRYPTO
+		* in the enqueued event.
+		*/
+	};
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * A structure used to retrieve statistics for an event crypto adapter
+ * instance.
+ */
+
+struct rte_event_crypto_adapter_stats {
+	uint64_t event_poll_count;
+	/**< Event port poll count */
+	uint64_t event_dequeue_count;
+	/**< Event dequeue count */
+	uint64_t crypto_enq_fail;
+	/**< Cryptodev enqueue failed count */
+	uint64_t crypto_deq_count;
+	/**< Cryptodev dequeue count */
+	uint64_t event_enq_retry_count;
+	/**< Event enqueue retry count */
+	uint64_t event_enq_fail_count;
+	/**< Event enqueue fail count */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Create a new event crypto adapter with the specified identifier.
+ *
+ * @param id
+ *  The identifier of the event crypto adapter.
+ *
+ * @param cdev_id
+ *  The identifier of the cryptodev to configure.
+ *
+ * @param conf_cb
+ *  Callback function that fills in members of a
+ *  struct rte_event_crypto_adapter_conf struct passed into
+ *  it.
+ *
+ * @param conf_arg
+ *  Argument that is passed to the conf_cb function.
+ *
+ * @return
+ *   - 0: Success
+ *   - <0: Error code on failure
+ */
+int rte_event_crypto_adapter_create_ext(uint8_t id, uint8_t cdev_id,
+				rte_event_crypto_adapter_conf_cb conf_cb,
+				void *conf_arg);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Create a new event crypto adapter with the specified identifier.
+ * This function uses an internal configuration function that creates an event
+ * port. This default function reconfigures the event device with an
+ * additional event port and setups up the event port using the port_config
+ * parameter passed into this function. In case the application needs more
+ * control in configuration of the service, it should use the
+ * rte_event_crypto_adapter_create_ext() version.
+ *
+ * @param id
+ *  The identifier of the event crypto adapter.
+ *
+ * @param cdev_id
+ *  The identifier of the cryptodev to configure.
+ *
+ * @param port_config
+ *  Argument of type *rte_event_port_conf* that is passed to the conf_cb
+ *  function.
+ *
+ * @return
+ *   - 0: Success
+ *   - <0: Error code on failure
+ */
+int rte_event_crypto_adapter_create(uint8_t id, uint8_t dev_id,
+				    struct rte_event_port_conf *port_config);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Free an event crypto adapter
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @return
+ *   - 0: Success
+ *   - <0: Error code on failure, If the adapter still has queue pairs
+ *      added to it, the function returns -EBUSY.
+ */
+int rte_event_crypto_adapter_free(uint8_t id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Add a queue pair to an event crypto adapter.
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @param cdev_id
+ *  Cryptodev identifier.
+ *
+ * @param queue_pair_id
+ *  Cryptodev queue pair identifier.
+ *
+ * @param conf
+ *  Additional configuration structure of type
+ *  *rte_event_crypto_queue_pair_conf*
+ *
+ * @return
+ *  - 0: Success, Receive queue pair added correctly.
+ *  - <0: Error code on failure.
+ */
+int rte_event_crypto_adapter_queue_pair_add(uint8_t id,
+			uint8_t cdev_id,
+			int32_t queue_pair_id,
+			const struct rte_event_crypto_queue_pair_conf *conf);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Delete a queue pair from an event crypto adapter.
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @param cdev_id
+ *  Identifier of Cryptodev.
+ *
+ * @param queue_pair_id
+ *  Cryptodev queue pair identifier.
+ *
+ * @return
+ *  - 0: Success, queue pair deleted successfully.
+ *  - <0: Error code on failure.
+ */
+int rte_event_crypto_adapter_queue_pair_del(uint8_t id, uint8_t cdev_id,
+					    int32_t queue_pair_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Start event crypto adapter
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @param type
+ *  Flag to indicate to start Rx only or both Rx & Tx.
+ *
+ * @return
+ *  - 0: Success, Adapter started successfully.
+ *  - <0: Error code on failure.
+ */
+int rte_event_crypto_adapter_start(uint8_t id,
+				   enum rte_event_crypto_adapter_type type);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Stop event crypto adapter
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @param type
+ *  Flag to indicate to start Rx only or both Rx & Tx.
+ *
+ * @return
+ *  - 0: Success, Adapter stopped successfully.
+ *  - <0: Error code on failure.
+ */
+int rte_event_crypto_adapter_stop(uint8_t id,
+				  enum rte_event_crypto_adapter_type type);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Retrieve statistics for an adapter
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @param [out] stats
+ *  A pointer to structure used to retrieve statistics for an adapter.
+ *
+ * @return
+ *  - 0: Success, retrieved successfully.
+ *  - <0: Error code on failure.
+ */
+int rte_event_crypto_adapter_stats_get(uint8_t id,
+				struct rte_event_crypto_adapter_stats *stats);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Reset statistics for an adapter.
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @return
+ *  - 0: Success, statistics reset successfully.
+ *  - <0: Error code on failure.
+ */
+int rte_event_crypto_adapter_stats_reset(uint8_t id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Retrieve the service ID of an adapter. If the adapter doesn't use
+ * a rte_service function, this function returns -ESRCH.
+ *
+ * @param id
+ *  Adapter identifier.
+ *
+ * @param [out] service_id
+ *  A pointer to a uint32_t, to be filled in with the service id.
+ *
+ * @return
+ *  - 0: Success
+ *  - <0: Error code on failure, if the adapter doesn't use a rte_service
+ * function, this function returns -ESRCH.
+ */
+int rte_event_crypto_adapter_service_id_get(uint8_t id, uint32_t *service_id);
+
+#ifdef __cplusplus
+}
+#endif
+#endif	/* _RTE_EVENT_CRYPTO_ADAPTER_ */
-- 
1.9.1

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2017-12-19  8:48 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-09  6:54 [dpdk-dev] [RFC] eventdev: add crypto adapter API header Abhinandan Gujjar
2017-11-29 11:41 ` Jerin Jacob
2017-12-13 11:03   ` Doherty, Declan
2017-12-13 11:26     ` Jerin Jacob
2017-12-13 12:28       ` Nithin Dabilpuram
2017-12-13 14:29         ` Akhil Goyal
2017-12-13 14:22       ` Akhil Goyal
2017-12-13 17:37         ` Jerin Jacob
2017-12-13 23:35   ` Eads, Gage
2017-12-14  2:49     ` Jerin Jacob
2017-12-14 18:52       ` Eads, Gage
2017-12-18  6:30         ` Jerin Jacob
2017-12-18 16:33           ` Eads, Gage
2017-12-19  8:47             ` Jerin Jacob

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).