DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds
@ 2017-12-19 10:53 Bruce Richardson
  2017-12-19 13:27 ` Luca Boccassi
                   ` (5 more replies)
  0 siblings, 6 replies; 30+ messages in thread
From: Bruce Richardson @ 2017-12-19 10:53 UTC (permalink / raw)
  To: dev; +Cc: bluca, jerin.jacob, hemant.agrawal, Bruce Richardson

Add some skeleton files to enable compiling for ARM target. This has been
tested by doing a cross-compile for armv8-a type using the linaro gcc
toolchain.

	meson arm-build --cross-file aarch64_cross.txt
	ninja -C arm-build

where aarch64_cross.txt contained the following

	[binaries]
	c = 'aarch64-linux-gnu-gcc'
	cpp = 'aarch64-linux-gnu-cpp'
	ar = 'aarch64-linux-gnu-ar'

	[host_machine]
	system = 'linux'
	cpu_family = 'aarch64'
	cpu = 'armv8-a'
	endian = 'little'

It is hoped that those working on arm architecture can use this as a baseline
to add arm support - both native compiled and cross-compiled - to the meson
build.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 config/arm/meson.build                             | 43 ++++++++++++++++
 config/meson.build                                 |  4 +-
 lib/librte_eal/common/arch/arm/meson.build         | 33 +++++++++++++
 lib/librte_eal/common/include/arch/arm/meson.build | 57 ++++++++++++++++++++++
 4 files changed, 136 insertions(+), 1 deletion(-)
 create mode 100644 config/arm/meson.build
 create mode 100644 lib/librte_eal/common/arch/arm/meson.build
 create mode 100644 lib/librte_eal/common/include/arch/arm/meson.build

diff --git a/config/arm/meson.build b/config/arm/meson.build
new file mode 100644
index 000000000..250958415
--- /dev/null
+++ b/config/arm/meson.build
@@ -0,0 +1,43 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# for checking defines we need to use the correct compiler flags
+march_opt = '-march=@0@'.format(machine)
+
+dpdk_conf.set('RTE_ARCH_ARM', 1)
+if cc.sizeof('void *') == 8
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+else
+	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+endif
+dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
diff --git a/config/meson.build b/config/meson.build
index d9a8e9f2c..e1cd35da8 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -84,8 +84,10 @@ endforeach
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
-	subdir(arch_subdir)
+elif host_machine.cpu_family().startswith('arm') or host_machine.cpu_family().startswith('aarch')
+	arch_subdir = 'arm'
 endif
+subdir(arch_subdir)
 dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 
 # set the install path for the drivers
diff --git a/lib/librte_eal/common/arch/arm/meson.build b/lib/librte_eal/common/arch/arm/meson.build
new file mode 100644
index 000000000..57158271d
--- /dev/null
+++ b/lib/librte_eal/common/arch/arm/meson.build
@@ -0,0 +1,33 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+eal_common_arch_sources = files('rte_cpuflags.c',
+	'rte_cycles.c')
diff --git a/lib/librte_eal/common/include/arch/arm/meson.build b/lib/librte_eal/common/include/arch/arm/meson.build
new file mode 100644
index 000000000..c5d399bf1
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm/meson.build
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+install_headers(
+	'rte_atomic_32.h',
+	'rte_atomic_64.h',
+	'rte_atomic.h',
+	'rte_byteorder.h',
+	'rte_cpuflags_32.h',
+	'rte_cpuflags_64.h',
+	'rte_cpuflags.h',
+	'rte_cycles_32.h',
+	'rte_cycles_64.h',
+	'rte_cycles.h',
+	'rte_io_64.h',
+	'rte_io.h',
+	'rte_memcpy_32.h',
+	'rte_memcpy_64.h',
+	'rte_memcpy.h',
+	'rte_pause_32.h',
+	'rte_pause_64.h',
+	'rte_pause.h',
+	'rte_prefetch_32.h',
+	'rte_prefetch_64.h',
+	'rte_prefetch.h',
+	'rte_rwlock.h',
+	'rte_spinlock.h',
+	'rte_vect.h',
+	subdir: get_option('include_subdir_arch'))
-- 
2.14.3

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds
  2017-12-19 10:53 [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds Bruce Richardson
@ 2017-12-19 13:27 ` Luca Boccassi
  2017-12-19 14:17   ` Bruce Richardson
  2018-01-19 13:05 ` [dpdk-dev] [PATCH v2 1/2] build: add " Pavan Nikhilesh
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 30+ messages in thread
From: Luca Boccassi @ 2017-12-19 13:27 UTC (permalink / raw)
  To: Bruce Richardson, dev; +Cc: jerin.jacob, hemant.agrawal

On Tue, 2017-12-19 at 10:53 +0000, Bruce Richardson wrote:
> Add some skeleton files to enable compiling for ARM target. This has
> been
> tested by doing a cross-compile for armv8-a type using the linaro gcc
> toolchain.
> 
> 	meson arm-build --cross-file aarch64_cross.txt
> 	ninja -C arm-build
> 
> where aarch64_cross.txt contained the following
> 
> 	[binaries]
> 	c = 'aarch64-linux-gnu-gcc'
> 	cpp = 'aarch64-linux-gnu-cpp'
> 	ar = 'aarch64-linux-gnu-ar'
> 
> 	[host_machine]
> 	system = 'linux'
> 	cpu_family = 'aarch64'
> 	cpu = 'armv8-a'
> 	endian = 'little'
> 
> It is hoped that those working on arm architecture can use this as a
> baseline
> to add arm support - both native compiled and cross-compiled - to the
> meson
> build.

Can't comment on ARM functionality, but shouldn't the new files use
SPDX ids rather than the full license header?

-- 
Kind regards,
Luca Boccassi

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds
  2017-12-19 13:27 ` Luca Boccassi
@ 2017-12-19 14:17   ` Bruce Richardson
  0 siblings, 0 replies; 30+ messages in thread
From: Bruce Richardson @ 2017-12-19 14:17 UTC (permalink / raw)
  To: Luca Boccassi; +Cc: dev, jerin.jacob, hemant.agrawal

On Tue, Dec 19, 2017 at 01:27:07PM +0000, Luca Boccassi wrote:
> On Tue, 2017-12-19 at 10:53 +0000, Bruce Richardson wrote:
> > Add some skeleton files to enable compiling for ARM target. This has
> > been
> > tested by doing a cross-compile for armv8-a type using the linaro gcc
> > toolchain.
> > 
> > 	meson arm-build --cross-file aarch64_cross.txt
> > 	ninja -C arm-build
> > 
> > where aarch64_cross.txt contained the following
> > 
> > 	[binaries]
> > 	c = 'aarch64-linux-gnu-gcc'
> > 	cpp = 'aarch64-linux-gnu-cpp'
> > 	ar = 'aarch64-linux-gnu-ar'
> > 
> > 	[host_machine]
> > 	system = 'linux'
> > 	cpu_family = 'aarch64'
> > 	cpu = 'armv8-a'
> > 	endian = 'little'
> > 
> > It is hoped that those working on arm architecture can use this as a
> > baseline
> > to add arm support - both native compiled and cross-compiled - to the
> > meson
> > build.
> 
> Can't comment on ARM functionality, but shouldn't the new files use
> SPDX ids rather than the full license header?
> 

Yes, they should. However, this is just a prototype patch used to verify
the cross-compile functionality of the build system and is not directly
intended for merge. A proper implementation should, I think, come from
those more familiar with arm architecture than I am. [Hence the CC of
Jerin and Hemant on the patch]. Because of that I didn't go back to edit
the license tag of the patch i.e. I was a bit lazy. :-)

/Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev]  [PATCH v2 1/2] build: add support for ARM builds
  2017-12-19 10:53 [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds Bruce Richardson
  2017-12-19 13:27 ` Luca Boccassi
@ 2018-01-19 13:05 ` Pavan Nikhilesh
  2018-01-19 13:05   ` [dpdk-dev] [PATCH v2 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
  2018-01-19 13:52 ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Pavan Nikhilesh
                   ` (3 subsequent siblings)
  5 siblings, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-19 13:05 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren; +Cc: dev, Pavan Nikhilesh

From: Bruce Richardson <bruce.richardson@intel.com>

Add files to enable compiling for ARM cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.

        meson arm-build --cross-file aarch64_cross.txt
        ninja -C arm-build

where aarch64_cross.txt contained the following

        [binaries]
        c = 'aarch64-linux-gnu-gcc'
        cpp = 'aarch64-linux-gnu-cpp'
        ar = 'aarch64-linux-gnu-ar'

        [host_machine]
        system = 'linux'
        cpu_family = 'aarch64'
        cpu = 'armv8-a'
        endian = 'little'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---

 v2 Changes:
 - Merged RFC patch.
 - Added framework to easily other vendor specific flags
 - renamed machine_arg to machine_args

 config/arm/meson.build                             | 63 ++++++++++++++++++++++
 config/meson.build                                 |  4 +-
 lib/librte_eal/common/arch/arm/meson.build         | 33 ++++++++++++
 lib/librte_eal/common/include/arch/arm/meson.build | 57 ++++++++++++++++++++
 4 files changed, 156 insertions(+), 1 deletion(-)
 create mode 100644 config/arm/meson.build
 create mode 100644 lib/librte_eal/common/arch/arm/meson.build
 create mode 100644 lib/librte_eal/common/include/arch/arm/meson.build

diff --git a/config/arm/meson.build b/config/arm/meson.build
new file mode 100644
index 000000000..0c2e57657
--- /dev/null
+++ b/config/arm/meson.build
@@ -0,0 +1,63 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# for checking defines we need to use the correct compiler flags
+march_opt = '-march=@0@'.format(machine)
+
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
+if cc.sizeof('void *') == 8
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
+	dpdk_conf.set('RTE_ARCH_ARM', 1)
+	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+endif
+
+if cc.get_define('__ARM_NEON', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA2', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_AES', 'RTE_CPUFLAG_PMULL',
+	'RTE_CPUFLAG_SHA1', 'RTE_CPUFLAG_SHA2']
+endif
diff --git a/config/meson.build b/config/meson.build
index 95223042f..fa55c53a5 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -56,8 +56,10 @@ endforeach
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
-	subdir(arch_subdir)
+elif host_machine.cpu_family().startswith('arm') or host_machine.cpu_family().startswith('aarch')
+	arch_subdir = 'arm'
 endif
+subdir(arch_subdir)
 dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))

 # set the install path for the drivers
diff --git a/lib/librte_eal/common/arch/arm/meson.build b/lib/librte_eal/common/arch/arm/meson.build
new file mode 100644
index 000000000..57158271d
--- /dev/null
+++ b/lib/librte_eal/common/arch/arm/meson.build
@@ -0,0 +1,33 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+eal_common_arch_sources = files('rte_cpuflags.c',
+	'rte_cycles.c')
diff --git a/lib/librte_eal/common/include/arch/arm/meson.build b/lib/librte_eal/common/include/arch/arm/meson.build
new file mode 100644
index 000000000..c5d399bf1
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm/meson.build
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+install_headers(
+	'rte_atomic_32.h',
+	'rte_atomic_64.h',
+	'rte_atomic.h',
+	'rte_byteorder.h',
+	'rte_cpuflags_32.h',
+	'rte_cpuflags_64.h',
+	'rte_cpuflags.h',
+	'rte_cycles_32.h',
+	'rte_cycles_64.h',
+	'rte_cycles.h',
+	'rte_io_64.h',
+	'rte_io.h',
+	'rte_memcpy_32.h',
+	'rte_memcpy_64.h',
+	'rte_memcpy.h',
+	'rte_pause_32.h',
+	'rte_pause_64.h',
+	'rte_pause.h',
+	'rte_prefetch_32.h',
+	'rte_prefetch_64.h',
+	'rte_prefetch.h',
+	'rte_rwlock.h',
+	'rte_spinlock.h',
+	'rte_vect.h',
+	subdir: get_option('include_subdir_arch'))
--
2.14.1

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev] [PATCH v2 2/2] build: add support for detecting march on ARM
  2018-01-19 13:05 ` [dpdk-dev] [PATCH v2 1/2] build: add " Pavan Nikhilesh
@ 2018-01-19 13:05   ` Pavan Nikhilesh
  0 siblings, 0 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-19 13:05 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren; +Cc: dev, Pavan Nikhilesh

Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 app/test-pmd/meson.build    |   2 +-
 config/arm/armv8_machine.py |  18 ++++++++
 config/arm/meson.build      | 109 +++++++++++++++++++++++++++++---------------
 config/meson.build          |  19 ++++----
 drivers/meson.build         |   2 +-
 examples/meson.build        |   2 +-
 lib/meson.build             |   2 +-
 meson.build                 |   2 +-
 test/test/meson.build       |   2 +-
 9 files changed, 105 insertions(+), 53 deletions(-)
 create mode 100755 config/arm/armv8_machine.py

diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
index e819677a5..2a3f0ba1f 100644
--- a/app/test-pmd/meson.build
+++ b/app/test-pmd/meson.build
@@ -45,7 +45,7 @@ endif
 
 executable('dpdk-testpmd',
 	sources,
-	c_args: machine_arg,
+	c_args: machine_args,
 	link_whole: link_libs,
 	dependencies: dep_objs,
 	install_rpath: join_paths(get_option('prefix'), driver_install_path),
diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
new file mode 100755
index 000000000..3c6e7b6a7
--- /dev/null
+++ b/config/arm/armv8_machine.py
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+import pprint
+pp = pprint
+
+ident = []
+fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
+with open(fname) as f:
+    content = f.read()
+
+midr_el1 = (int(content.rstrip('\n'), 16))
+
+ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
+ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
+ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
+ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
+ident.append(hex(midr_el1 & 0xF))           # Revision
+
+print(' '.join(ident))
diff --git a/config/arm/meson.build b/config/arm/meson.build
index 0c2e57657..62af5e68a 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -1,59 +1,92 @@
-#   BSD LICENSE
-#
-#   Copyright(c) 2017 Intel Corporation.
-#   All rights reserved.
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in
-#       the documentation and/or other materials provided with the
-#       distribution.
-#     * Neither the name of Intel Corporation nor the names of its
-#       contributors may be used to endorse or promote products derived
-#       from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+# Copyright(c) 2017 Cavium, Inc
 
 # for checking defines we need to use the correct compiler flags
 march_opt = '-march=@0@'.format(machine)
 
+machine_args_cavium = [
+	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
+	['0xa1', ['-mcpu=thunderxt88']],
+	['0xa2', ['-mcpu=thunderxt81']],
+	['0xa3', ['-mcpu=thunderxt83']]]
+
+flags_cavium = [
+	['RTE_MACHINE', '"thunderx"'],
+	['RTE_CACHE_LINE_SIZE', 128],
+	['RTE_MAX_NUMA_NODES', 2],
+	['RTE_MAX_LCORE', 96],
+	['RTE_MAX_VFIO_GROUPS', 128],
+	['RTE_RING_USE_C11_MEM_MODEL', false]]
+
+impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
+
+dpdk_conf.set('RTE_TOOLCHAIN', '"gcc"')
+dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
 dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
-if cc.sizeof('void *') == 8
-	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
-	dpdk_conf.set('RTE_ARCH_ARM64', 1)
-	dpdk_conf.set('RTE_ARCH_64', 1)
-else
+
+if cc.sizeof('void *') != 8
 	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
 	dpdk_conf.set('RTE_ARCH_ARM', 1)
 	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+
+	if not meson.is_cross_build()
+		# The script returns ['Implementor', 'Variant', 'Architecture',
+		# 'Primary Part number', 'Revision']
+		detect_vendor = find_program(join_paths(
+				meson.current_source_dir(), 'armv8_machine.py'))
+		cmd = run_command(detect_vendor.path())
+		if cmd.returncode() != 0
+			message('Using default armv8 config')
+		else
+			machine_args = [] # Clear previous machine args
+			cmd_output = cmd.stdout().strip().split(' ')
+			machine = get_variable('impl_' + cmd_output[0])
+			message('Implementor : ' + machine[0])
+
+			foreach flag: machine[1]
+				dpdk_conf.set(flag[0], flag[1])
+			endforeach
+
+			# Primary part number based mcpu flags are supported
+			# for gcc versions > 7
+			if cc.version().version_compare('<7.0')
+				foreach marg: machine[2]
+					if marg[0] == 'default'
+						foreach f: marg[1]
+							machine_args += f
+						endforeach
+					endif
+				endforeach
+			else
+				foreach marg: machine[2]
+					if marg[0] == cmd_output[3]
+						foreach f: marg[1]
+							machine_args += f
+						endforeach
+					endif
+				endforeach
+			endif
+		endif
+	endif
 endif
+message(machine_args)
 
-if cc.get_define('__ARM_NEON', args: march_opt) != ''
+if cc.get_define('__ARM_NEON', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRC32', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
diff --git a/config/meson.build b/config/meson.build
index fa55c53a5..f8c67578d 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -8,7 +8,8 @@ else
 	machine = get_option('machine')
 endif
 dpdk_conf.set('RTE_MACHINE', machine)
-machine_arg = '-march=' + machine
+machine_args = []
+machine_args += '-march=' + machine
 
 # use pthreads
 add_project_link_arguments('-pthread', language: 'c')
@@ -53,6 +54,14 @@ foreach arg: warning_flags
 	endif
 endforeach
 
+# set other values pulled from the build options
+dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
+dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
+dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
+dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
+# values which have defaults which may be overridden
+dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
+
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
@@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-# set other values pulled from the build options
-dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
-dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
-dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
-dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
-# values which have defaults which may be overridden
-dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
-
 install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
diff --git a/drivers/meson.build b/drivers/meson.build
index 9b5039847..1d6430bfe 100644
--- a/drivers/meson.build
+++ b/drivers/meson.build
@@ -22,7 +22,7 @@ foreach class:driver_classes
 		version = 1
 		sources = []
 		objs = []
-		cflags = [machine_arg]
+		cflags = machine_args
 		includes = [include_directories(drv_path)]
 		# set up internal deps. Drivers can append/override as necessary
 		deps = std_deps
diff --git a/examples/meson.build b/examples/meson.build
index 0abed7169..b3f997242 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -9,7 +9,7 @@ endif
 foreach example: get_option('examples').split(',')
 	name = example
 	sources = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	ext_deps = []
 	includes = [include_directories(example)]
 	deps = ['eal', 'mempool', 'net', 'mbuf', 'ethdev', 'cmdline']
diff --git a/lib/meson.build b/lib/meson.build
index 0c94d74b9..b9ea6f61b 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -31,7 +31,7 @@ foreach l:libraries
 	sources = []
 	headers = []
 	includes = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	objs = [] # other object files to link against, used e.g. for
 	          # instruction-set optimized versions of code
 
diff --git a/meson.build b/meson.build
index 3dce8579e..326fbc7d1 100644
--- a/meson.build
+++ b/meson.build
@@ -66,5 +66,5 @@ pkg.generate(name: meson.project_name(),
 			['-Wl,-Bdynamic'] + dpdk_extra_ldflags,
 	description: 'The Data Plane Development Kit (DPDK)',
 	subdirs: [get_option('include_subdir_arch'), '.'],
-	extra_cflags: ['-include "rte_config.h"', machine_arg]
+	extra_cflags: ['-include "rte_config.h"'] + machine_args
 )
diff --git a/test/test/meson.build b/test/test/meson.build
index 1863c603c..873efbc07 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -204,7 +204,7 @@ if get_option('tests')
 		test_sources,
 		link_whole: link_libs,
 		dependencies: test_dep_objs,
-		c_args: machine_arg,
+		c_args: machine_args,
 		install_rpath: driver_install_path,
 		install: false)
 
-- 
2.14.1

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev]  [PATCH v3 1/2] build: add support for ARM builds
  2017-12-19 10:53 [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds Bruce Richardson
  2017-12-19 13:27 ` Luca Boccassi
  2018-01-19 13:05 ` [dpdk-dev] [PATCH v2 1/2] build: add " Pavan Nikhilesh
@ 2018-01-19 13:52 ` Pavan Nikhilesh
  2018-01-19 13:52   ` [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
  2018-01-19 16:24   ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Bruce Richardson
  2018-01-19 18:23 ` [dpdk-dev] [PATCH v4 " Pavan Nikhilesh
                   ` (2 subsequent siblings)
  5 siblings, 2 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-19 13:52 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan
  Cc: dev, Pavan Nikhilesh

From: Bruce Richardson <bruce.richardson@intel.com>

Add files to enable compiling for ARM cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.

        meson arm-build --cross-file aarch64_cross.txt
        ninja -C arm-build

where aarch64_cross.txt contained the following

        [binaries]
        c = 'aarch64-linux-gnu-gcc'
        cpp = 'aarch64-linux-gnu-cpp'
        ar = 'aarch64-linux-gnu-ar'

        [host_machine]
        system = 'linux'
        cpu_family = 'aarch64'
        cpu = 'armv8-a'
        endian = 'little'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 v3 Changes:
 - Fix missing SPDX license tags

 v2 Changes:
 - Merged RFC patch.
 - Added framework to easily other vendor specific flags
 - renamed machine_arg to machine_args

 config/arm/meson.build                             | 36 ++++++++++++++++++++++
 config/meson.build                                 |  4 ++-
 lib/librte_eal/common/arch/arm/meson.build         |  5 +++
 lib/librte_eal/common/include/arch/arm/meson.build | 29 +++++++++++++++++
 4 files changed, 73 insertions(+), 1 deletion(-)
 create mode 100644 config/arm/meson.build
 create mode 100644 lib/librte_eal/common/arch/arm/meson.build
 create mode 100644 lib/librte_eal/common/include/arch/arm/meson.build

diff --git a/config/arm/meson.build b/config/arm/meson.build
new file mode 100644
index 000000000..f05de4c2c
--- /dev/null
+++ b/config/arm/meson.build
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+# Copyright(c) 2017 Cavium, Inc
+
+# for checking defines we need to use the correct compiler flags
+march_opt = '-march=@0@'.format(machine)
+
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
+if cc.sizeof('void *') == 8
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
+	dpdk_conf.set('RTE_ARCH_ARM', 1)
+	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+endif
+
+if cc.get_define('__ARM_NEON', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA2', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_AES', 'RTE_CPUFLAG_PMULL',
+	'RTE_CPUFLAG_SHA1', 'RTE_CPUFLAG_SHA2']
+endif
diff --git a/config/meson.build b/config/meson.build
index 95223042f..fa55c53a5 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -56,8 +56,10 @@ endforeach
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
-	subdir(arch_subdir)
+elif host_machine.cpu_family().startswith('arm') or host_machine.cpu_family().startswith('aarch')
+	arch_subdir = 'arm'
 endif
+subdir(arch_subdir)
 dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))

 # set the install path for the drivers
diff --git a/lib/librte_eal/common/arch/arm/meson.build b/lib/librte_eal/common/arch/arm/meson.build
new file mode 100644
index 000000000..c6bd92272
--- /dev/null
+++ b/lib/librte_eal/common/arch/arm/meson.build
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+eal_common_arch_sources = files('rte_cpuflags.c',
+	'rte_cycles.c')
diff --git a/lib/librte_eal/common/include/arch/arm/meson.build b/lib/librte_eal/common/include/arch/arm/meson.build
new file mode 100644
index 000000000..77893fa35
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm/meson.build
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+install_headers(
+	'rte_atomic_32.h',
+	'rte_atomic_64.h',
+	'rte_atomic.h',
+	'rte_byteorder.h',
+	'rte_cpuflags_32.h',
+	'rte_cpuflags_64.h',
+	'rte_cpuflags.h',
+	'rte_cycles_32.h',
+	'rte_cycles_64.h',
+	'rte_cycles.h',
+	'rte_io_64.h',
+	'rte_io.h',
+	'rte_memcpy_32.h',
+	'rte_memcpy_64.h',
+	'rte_memcpy.h',
+	'rte_pause_32.h',
+	'rte_pause_64.h',
+	'rte_pause.h',
+	'rte_prefetch_32.h',
+	'rte_prefetch_64.h',
+	'rte_prefetch.h',
+	'rte_rwlock.h',
+	'rte_spinlock.h',
+	'rte_vect.h',
+	subdir: get_option('include_subdir_arch'))
--
2.15.1

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM
  2018-01-19 13:52 ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Pavan Nikhilesh
@ 2018-01-19 13:52   ` Pavan Nikhilesh
  2018-01-19 16:17     ` Bruce Richardson
  2018-01-19 16:24   ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Bruce Richardson
  1 sibling, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-19 13:52 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan
  Cc: dev, Pavan Nikhilesh

Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 app/test-pmd/meson.build    |  2 +-
 config/arm/armv8_machine.py | 18 +++++++++++
 config/arm/meson.build      | 76 ++++++++++++++++++++++++++++++++++++++++-----
 config/meson.build          | 19 ++++++------
 drivers/meson.build         |  2 +-
 examples/meson.build        |  2 +-
 lib/meson.build             |  2 +-
 meson.build                 |  2 +-
 test/test/meson.build       |  2 +-
 9 files changed, 102 insertions(+), 23 deletions(-)
 create mode 100755 config/arm/armv8_machine.py

diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
index e819677a5..2a3f0ba1f 100644
--- a/app/test-pmd/meson.build
+++ b/app/test-pmd/meson.build
@@ -45,7 +45,7 @@ endif
 
 executable('dpdk-testpmd',
 	sources,
-	c_args: machine_arg,
+	c_args: machine_args,
 	link_whole: link_libs,
 	dependencies: dep_objs,
 	install_rpath: join_paths(get_option('prefix'), driver_install_path),
diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
new file mode 100755
index 000000000..404866d2f
--- /dev/null
+++ b/config/arm/armv8_machine.py
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Cavium, Inc
+
+ident = []
+fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
+with open(fname) as f:
+    content = f.read()
+
+midr_el1 = (int(content.rstrip('\n'), 16))
+
+ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
+ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
+ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
+ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
+ident.append(hex(midr_el1 & 0xF))           # Revision
+
+print(' '.join(ident))
diff --git a/config/arm/meson.build b/config/arm/meson.build
index f05de4c2c..62af5e68a 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -5,28 +5,88 @@
 # for checking defines we need to use the correct compiler flags
 march_opt = '-march=@0@'.format(machine)
 
+machine_args_cavium = [
+	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
+	['0xa1', ['-mcpu=thunderxt88']],
+	['0xa2', ['-mcpu=thunderxt81']],
+	['0xa3', ['-mcpu=thunderxt83']]]
+
+flags_cavium = [
+	['RTE_MACHINE', '"thunderx"'],
+	['RTE_CACHE_LINE_SIZE', 128],
+	['RTE_MAX_NUMA_NODES', 2],
+	['RTE_MAX_LCORE', 96],
+	['RTE_MAX_VFIO_GROUPS', 128],
+	['RTE_RING_USE_C11_MEM_MODEL', false]]
+
+impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
+
+dpdk_conf.set('RTE_TOOLCHAIN', '"gcc"')
+dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
 dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
-if cc.sizeof('void *') == 8
-	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
-	dpdk_conf.set('RTE_ARCH_ARM64', 1)
-	dpdk_conf.set('RTE_ARCH_64', 1)
-else
+
+if cc.sizeof('void *') != 8
 	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
 	dpdk_conf.set('RTE_ARCH_ARM', 1)
 	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+
+	if not meson.is_cross_build()
+		# The script returns ['Implementor', 'Variant', 'Architecture',
+		# 'Primary Part number', 'Revision']
+		detect_vendor = find_program(join_paths(
+				meson.current_source_dir(), 'armv8_machine.py'))
+		cmd = run_command(detect_vendor.path())
+		if cmd.returncode() != 0
+			message('Using default armv8 config')
+		else
+			machine_args = [] # Clear previous machine args
+			cmd_output = cmd.stdout().strip().split(' ')
+			machine = get_variable('impl_' + cmd_output[0])
+			message('Implementor : ' + machine[0])
+
+			foreach flag: machine[1]
+				dpdk_conf.set(flag[0], flag[1])
+			endforeach
+
+			# Primary part number based mcpu flags are supported
+			# for gcc versions > 7
+			if cc.version().version_compare('<7.0')
+				foreach marg: machine[2]
+					if marg[0] == 'default'
+						foreach f: marg[1]
+							machine_args += f
+						endforeach
+					endif
+				endforeach
+			else
+				foreach marg: machine[2]
+					if marg[0] == cmd_output[3]
+						foreach f: marg[1]
+							machine_args += f
+						endforeach
+					endif
+				endforeach
+			endif
+		endif
+	endif
 endif
+message(machine_args)
 
-if cc.get_define('__ARM_NEON', args: march_opt) != ''
+if cc.get_define('__ARM_NEON', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRC32', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
diff --git a/config/meson.build b/config/meson.build
index fa55c53a5..f8c67578d 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -8,7 +8,8 @@ else
 	machine = get_option('machine')
 endif
 dpdk_conf.set('RTE_MACHINE', machine)
-machine_arg = '-march=' + machine
+machine_args = []
+machine_args += '-march=' + machine
 
 # use pthreads
 add_project_link_arguments('-pthread', language: 'c')
@@ -53,6 +54,14 @@ foreach arg: warning_flags
 	endif
 endforeach
 
+# set other values pulled from the build options
+dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
+dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
+dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
+dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
+# values which have defaults which may be overridden
+dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
+
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
@@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-# set other values pulled from the build options
-dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
-dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
-dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
-dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
-# values which have defaults which may be overridden
-dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
-
 install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
diff --git a/drivers/meson.build b/drivers/meson.build
index 9b5039847..1d6430bfe 100644
--- a/drivers/meson.build
+++ b/drivers/meson.build
@@ -22,7 +22,7 @@ foreach class:driver_classes
 		version = 1
 		sources = []
 		objs = []
-		cflags = [machine_arg]
+		cflags = machine_args
 		includes = [include_directories(drv_path)]
 		# set up internal deps. Drivers can append/override as necessary
 		deps = std_deps
diff --git a/examples/meson.build b/examples/meson.build
index 0abed7169..b3f997242 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -9,7 +9,7 @@ endif
 foreach example: get_option('examples').split(',')
 	name = example
 	sources = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	ext_deps = []
 	includes = [include_directories(example)]
 	deps = ['eal', 'mempool', 'net', 'mbuf', 'ethdev', 'cmdline']
diff --git a/lib/meson.build b/lib/meson.build
index 0c94d74b9..b9ea6f61b 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -31,7 +31,7 @@ foreach l:libraries
 	sources = []
 	headers = []
 	includes = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	objs = [] # other object files to link against, used e.g. for
 	          # instruction-set optimized versions of code
 
diff --git a/meson.build b/meson.build
index 3dce8579e..326fbc7d1 100644
--- a/meson.build
+++ b/meson.build
@@ -66,5 +66,5 @@ pkg.generate(name: meson.project_name(),
 			['-Wl,-Bdynamic'] + dpdk_extra_ldflags,
 	description: 'The Data Plane Development Kit (DPDK)',
 	subdirs: [get_option('include_subdir_arch'), '.'],
-	extra_cflags: ['-include "rte_config.h"', machine_arg]
+	extra_cflags: ['-include "rte_config.h"'] + machine_args
 )
diff --git a/test/test/meson.build b/test/test/meson.build
index 1863c603c..873efbc07 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -204,7 +204,7 @@ if get_option('tests')
 		test_sources,
 		link_whole: link_libs,
 		dependencies: test_dep_objs,
-		c_args: machine_arg,
+		c_args: machine_args,
 		install_rpath: driver_install_path,
 		install: false)
 
-- 
2.15.1

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM
  2018-01-19 13:52   ` [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
@ 2018-01-19 16:17     ` Bruce Richardson
  2018-01-19 17:13       ` Pavan Nikhilesh
  0 siblings, 1 reply; 30+ messages in thread
From: Bruce Richardson @ 2018-01-19 16:17 UTC (permalink / raw)
  To: Pavan Nikhilesh; +Cc: jerin.jacob, harry.van.haaren, herbert.guan, dev

On Fri, Jan 19, 2018 at 07:22:51PM +0530, Pavan Nikhilesh wrote:
> Added support for detecting march and mcpu by reading midr_el1 register.
> The implementer, primary part number values read can be used to figure
> out the underlying arm cpu.
> 
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> ---
>  app/test-pmd/meson.build    |  2 +-
>  config/arm/armv8_machine.py | 18 +++++++++++
>  config/arm/meson.build      | 76 ++++++++++++++++++++++++++++++++++++++++-----
>  config/meson.build          | 19 ++++++------
>  drivers/meson.build         |  2 +-
>  examples/meson.build        |  2 +-
>  lib/meson.build             |  2 +-
>  meson.build                 |  2 +-
>  test/test/meson.build       |  2 +-
>  9 files changed, 102 insertions(+), 23 deletions(-)
>  create mode 100755 config/arm/armv8_machine.py
> 
> diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
> index e819677a5..2a3f0ba1f 100644
> --- a/app/test-pmd/meson.build
> +++ b/app/test-pmd/meson.build
> @@ -45,7 +45,7 @@ endif
>  
>  executable('dpdk-testpmd',
>  	sources,
> -	c_args: machine_arg,
> +	c_args: machine_args,
>  	link_whole: link_libs,
>  	dependencies: dep_objs,
>  	install_rpath: join_paths(get_option('prefix'), driver_install_path),
> diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
> new file mode 100755
> index 000000000..404866d2f
> --- /dev/null
> +++ b/config/arm/armv8_machine.py
> @@ -0,0 +1,18 @@
> +#!/usr/bin/python
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2017 Cavium, Inc
> +
> +ident = []
> +fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
> +with open(fname) as f:
> +    content = f.read()
> +
> +midr_el1 = (int(content.rstrip('\n'), 16))
> +
> +ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
> +ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
> +ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
> +ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
> +ident.append(hex(midr_el1 & 0xF))           # Revision
> +
> +print(' '.join(ident))
> diff --git a/config/arm/meson.build b/config/arm/meson.build
> index f05de4c2c..62af5e68a 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -5,28 +5,88 @@
>  # for checking defines we need to use the correct compiler flags
>  march_opt = '-march=@0@'.format(machine)
>  
> +machine_args_cavium = [
> +	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
> +	['0xa1', ['-mcpu=thunderxt88']],
> +	['0xa2', ['-mcpu=thunderxt81']],
> +	['0xa3', ['-mcpu=thunderxt83']]]
> +
> +flags_cavium = [
> +	['RTE_MACHINE', '"thunderx"'],
> +	['RTE_CACHE_LINE_SIZE', 128],
> +	['RTE_MAX_NUMA_NODES', 2],
> +	['RTE_MAX_LCORE', 96],
> +	['RTE_MAX_VFIO_GROUPS', 128],
> +	['RTE_RING_USE_C11_MEM_MODEL', false]]
> +
> +impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
> +
> +dpdk_conf.set('RTE_TOOLCHAIN', '"gcc"')

dpdk_conf.set_quoted() is probably what you want here.

> +dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
<snip>
> dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
> diff --git a/config/meson.build b/config/meson.build
> index fa55c53a5..f8c67578d 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -8,7 +8,8 @@ else
>  	machine = get_option('machine')
>  endif
>  dpdk_conf.set('RTE_MACHINE', machine)
> -machine_arg = '-march=' + machine
> +machine_args = []
> +machine_args += '-march=' + machine
>  
>  # use pthreads
>  add_project_link_arguments('-pthread', language: 'c')
> @@ -53,6 +54,14 @@ foreach arg: warning_flags
>  	endif
>  endforeach
>  
> +# set other values pulled from the build options
> +dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
> +dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> +dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> +dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
> +# values which have defaults which may be overridden
> +dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> +
>  compile_time_cpuflags = []
>  if host_machine.cpu_family().startswith('x86')
>  	arch_subdir = 'x86'
> @@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
>  # set the install path for the drivers
>  dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
>  
> -# set other values pulled from the build options
> -dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
> -dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> -dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> -dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
> -# values which have defaults which may be overridden
> -dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> -
Is there a reason why these lines have been moved?

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds
  2018-01-19 13:52 ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Pavan Nikhilesh
  2018-01-19 13:52   ` [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
@ 2018-01-19 16:24   ` Bruce Richardson
  2018-01-19 16:49     ` Hemant Agrawal
  1 sibling, 1 reply; 30+ messages in thread
From: Bruce Richardson @ 2018-01-19 16:24 UTC (permalink / raw)
  To: Pavan Nikhilesh
  Cc: jerin.jacob, harry.van.haaren, herbert.guan, dev, hemant.agrawal,
	shreyansh.jain

On Fri, Jan 19, 2018 at 07:22:50PM +0530, Pavan Nikhilesh wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add files to enable compiling for ARM cross builds.
> This can be tested by doing a cross-compile for armv8-a type using
> the linaro gcc toolchain.
> 
>         meson arm-build --cross-file aarch64_cross.txt
>         ninja -C arm-build
> 
> where aarch64_cross.txt contained the following
> 
>         [binaries]
>         c = 'aarch64-linux-gnu-gcc'
>         cpp = 'aarch64-linux-gnu-cpp'
>         ar = 'aarch64-linux-gnu-ar'
> 
>         [host_machine]
>         system = 'linux'
>         cpu_family = 'aarch64'
>         cpu = 'armv8-a'
>         endian = 'little'
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> ---
>  v3 Changes:
>  - Fix missing SPDX license tags
> 
>  v2 Changes:
>  - Merged RFC patch.
>  - Added framework to easily other vendor specific flags
>  - renamed machine_arg to machine_args
> 
Set LGTM, but it would be nice to get an ACK or review from another ARM
expert. Any volunteers?

/Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds
  2018-01-19 16:24   ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Bruce Richardson
@ 2018-01-19 16:49     ` Hemant Agrawal
  2018-01-19 17:33       ` Bruce Richardson
  0 siblings, 1 reply; 30+ messages in thread
From: Hemant Agrawal @ 2018-01-19 16:49 UTC (permalink / raw)
  To: Bruce Richardson, Pavan Nikhilesh
  Cc: jerin.jacob, harry.van.haaren, herbert.guan, dev, Shreyansh Jain,
	Akhil Goyal

HI Bruce,
	Are these planned for 18.02?  If so,  I will prioritize this work.

Regards,
Hemant

> -----Original Message-----
> From: Bruce Richardson [mailto:bruce.richardson@intel.com]
> Sent: Friday, January 19, 2018 9:54 PM
> To: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> Cc: jerin.jacob@caviumnetworks.com; harry.van.haaren@intel.com;
> herbert.guan@arm.com; dev@dpdk.org; Hemant Agrawal
> <hemant.agrawal@nxp.com>; Shreyansh Jain <shreyansh.jain@nxp.com>
> Subject: Re: [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds
> Importance: High
> 
> On Fri, Jan 19, 2018 at 07:22:50PM +0530, Pavan Nikhilesh wrote:
> > From: Bruce Richardson <bruce.richardson@intel.com>
> >
> > Add files to enable compiling for ARM cross builds.
> > This can be tested by doing a cross-compile for armv8-a type using the
> > linaro gcc toolchain.
> >
> >         meson arm-build --cross-file aarch64_cross.txt
> >         ninja -C arm-build
> >
> > where aarch64_cross.txt contained the following
> >
> >         [binaries]
> >         c = 'aarch64-linux-gnu-gcc'
> >         cpp = 'aarch64-linux-gnu-cpp'
> >         ar = 'aarch64-linux-gnu-ar'
> >
> >         [host_machine]
> >         system = 'linux'
> >         cpu_family = 'aarch64'
> >         cpu = 'armv8-a'
> >         endian = 'little'
> >
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > ---
> >  v3 Changes:
> >  - Fix missing SPDX license tags
> >
> >  v2 Changes:
> >  - Merged RFC patch.
> >  - Added framework to easily other vendor specific flags
> >  - renamed machine_arg to machine_args
> >
> Set LGTM, but it would be nice to get an ACK or review from another ARM
> expert. Any volunteers?
> 
> /Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM
  2018-01-19 16:17     ` Bruce Richardson
@ 2018-01-19 17:13       ` Pavan Nikhilesh
  2018-01-19 17:30         ` Bruce Richardson
  0 siblings, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-19 17:13 UTC (permalink / raw)
  To: Bruce Richardson, jerin.jacob, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev

On Fri, Jan 19, 2018 at 04:17:41PM +0000, Bruce Richardson wrote:
> On Fri, Jan 19, 2018 at 07:22:51PM +0530, Pavan Nikhilesh wrote:
> > Added support for detecting march and mcpu by reading midr_el1 register.
> > The implementer, primary part number values read can be used to figure
> > out the underlying arm cpu.
> >
> > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > ---
> >  app/test-pmd/meson.build    |  2 +-
> >  config/arm/armv8_machine.py | 18 +++++++++++
> >  config/arm/meson.build      | 76 ++++++++++++++++++++++++++++++++++++++++-----
> >  config/meson.build          | 19 ++++++------
> >  drivers/meson.build         |  2 +-
> >  examples/meson.build        |  2 +-
> >  lib/meson.build             |  2 +-
> >  meson.build                 |  2 +-
> >  test/test/meson.build       |  2 +-
> >  9 files changed, 102 insertions(+), 23 deletions(-)
> >  create mode 100755 config/arm/armv8_machine.py
> >
> > diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
> > index e819677a5..2a3f0ba1f 100644
> > --- a/app/test-pmd/meson.build
> > +++ b/app/test-pmd/meson.build
> > @@ -45,7 +45,7 @@ endif
> >
> >  executable('dpdk-testpmd',
> >  	sources,
> > -	c_args: machine_arg,
> > +	c_args: machine_args,
> >  	link_whole: link_libs,
> >  	dependencies: dep_objs,
> >  	install_rpath: join_paths(get_option('prefix'), driver_install_path),
> > diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
> > new file mode 100755
> > index 000000000..404866d2f
> > --- /dev/null
> > +++ b/config/arm/armv8_machine.py
> > @@ -0,0 +1,18 @@
> > +#!/usr/bin/python
> > +# SPDX-License-Identifier: BSD-3-Clause
> > +# Copyright(c) 2017 Cavium, Inc
> > +
> > +ident = []
> > +fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
> > +with open(fname) as f:
> > +    content = f.read()
> > +
> > +midr_el1 = (int(content.rstrip('\n'), 16))
> > +
> > +ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
> > +ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
> > +ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
> > +ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
> > +ident.append(hex(midr_el1 & 0xF))           # Revision
> > +
> > +print(' '.join(ident))
> > diff --git a/config/arm/meson.build b/config/arm/meson.build
> > index f05de4c2c..62af5e68a 100644
> > --- a/config/arm/meson.build
> > +++ b/config/arm/meson.build
> > @@ -5,28 +5,88 @@
> >  # for checking defines we need to use the correct compiler flags
> >  march_opt = '-march=@0@'.format(machine)
> >
> > +machine_args_cavium = [
> > +	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
> > +	['0xa1', ['-mcpu=thunderxt88']],
> > +	['0xa2', ['-mcpu=thunderxt81']],
> > +	['0xa3', ['-mcpu=thunderxt83']]]
> > +
> > +flags_cavium = [
> > +	['RTE_MACHINE', '"thunderx"'],
> > +	['RTE_CACHE_LINE_SIZE', 128],
> > +	['RTE_MAX_NUMA_NODES', 2],
> > +	['RTE_MAX_LCORE', 96],
> > +	['RTE_MAX_VFIO_GROUPS', 128],
> > +	['RTE_RING_USE_C11_MEM_MODEL', false]]
> > +
> > +impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
> > +
> > +dpdk_conf.set('RTE_TOOLCHAIN', '"gcc"')
>
> dpdk_conf.set_quoted() is probably what you want here.

Ah, will fix it in v4

>
> > +dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
> <snip>
> > dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
> > diff --git a/config/meson.build b/config/meson.build
> > index fa55c53a5..f8c67578d 100644
> > --- a/config/meson.build
> > +++ b/config/meson.build
> > @@ -8,7 +8,8 @@ else
> >  	machine = get_option('machine')
> >  endif
> >  dpdk_conf.set('RTE_MACHINE', machine)
> > -machine_arg = '-march=' + machine
> > +machine_args = []
> > +machine_args += '-march=' + machine
> >
> >  # use pthreads
> >  add_project_link_arguments('-pthread', language: 'c')
> > @@ -53,6 +54,14 @@ foreach arg: warning_flags
> >  	endif
> >  endforeach
> >
> > +# set other values pulled from the build options
> > +dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
> > +dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> > +dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> > +dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
> > +# values which have defaults which may be overridden
> > +dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> > +
> >  compile_time_cpuflags = []
> >  if host_machine.cpu_family().startswith('x86')
> >  	arch_subdir = 'x86'
> > @@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
> >  # set the install path for the drivers
> >  dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
> >
> > -# set other values pulled from the build options
> > -dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
> > -dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> > -dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> > -dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
> > -# values which have defaults which may be overridden
> > -dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> > -
> Is there a reason why these lines have been moved?

I have moved them above so that they can be overridden by the arch specific
scripts called by subdir(arch_subdir).
Example RTE_MAX_VFIO_GROUPS needs to be 128 in thunderx.
>

Thanks,
Pavan.

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM
  2018-01-19 17:13       ` Pavan Nikhilesh
@ 2018-01-19 17:30         ` Bruce Richardson
  0 siblings, 0 replies; 30+ messages in thread
From: Bruce Richardson @ 2018-01-19 17:30 UTC (permalink / raw)
  To: Pavan Nikhilesh
  Cc: jerin.jacob, harry.van.haaren, herbert.guan, hemant.agrawal, dev

On Fri, Jan 19, 2018 at 10:43:31PM +0530, Pavan Nikhilesh wrote:
> On Fri, Jan 19, 2018 at 04:17:41PM +0000, Bruce Richardson wrote:
> > On Fri, Jan 19, 2018 at 07:22:51PM +0530, Pavan Nikhilesh wrote:
> > > Added support for detecting march and mcpu by reading midr_el1 register.
> > > The implementer, primary part number values read can be used to figure
> > > out the underlying arm cpu.
> > >
> > > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > > ---
> > >  app/test-pmd/meson.build    |  2 +-
> > >  config/arm/armv8_machine.py | 18 +++++++++++
> > >  config/arm/meson.build      | 76 ++++++++++++++++++++++++++++++++++++++++-----
> > >  config/meson.build          | 19 ++++++------
> > >  drivers/meson.build         |  2 +-
> > >  examples/meson.build        |  2 +-
> > >  lib/meson.build             |  2 +-
> > >  meson.build                 |  2 +-
> > >  test/test/meson.build       |  2 +-
> > >  9 files changed, 102 insertions(+), 23 deletions(-)
> > >  create mode 100755 config/arm/armv8_machine.py
> > >
> > > diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
> > > index e819677a5..2a3f0ba1f 100644
> > > --- a/app/test-pmd/meson.build
> > > +++ b/app/test-pmd/meson.build
> > > @@ -45,7 +45,7 @@ endif
> > >
> > >  executable('dpdk-testpmd',
> > >  	sources,
> > > -	c_args: machine_arg,
> > > +	c_args: machine_args,
> > >  	link_whole: link_libs,
> > >  	dependencies: dep_objs,
> > >  	install_rpath: join_paths(get_option('prefix'), driver_install_path),
> > > diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
> > > new file mode 100755
> > > index 000000000..404866d2f
> > > --- /dev/null
> > > +++ b/config/arm/armv8_machine.py
> > > @@ -0,0 +1,18 @@
> > > +#!/usr/bin/python
> > > +# SPDX-License-Identifier: BSD-3-Clause
> > > +# Copyright(c) 2017 Cavium, Inc
> > > +
> > > +ident = []
> > > +fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
> > > +with open(fname) as f:
> > > +    content = f.read()
> > > +
> > > +midr_el1 = (int(content.rstrip('\n'), 16))
> > > +
> > > +ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
> > > +ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
> > > +ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
> > > +ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
> > > +ident.append(hex(midr_el1 & 0xF))           # Revision
> > > +
> > > +print(' '.join(ident))
> > > diff --git a/config/arm/meson.build b/config/arm/meson.build
> > > index f05de4c2c..62af5e68a 100644
> > > --- a/config/arm/meson.build
> > > +++ b/config/arm/meson.build
> > > @@ -5,28 +5,88 @@
> > >  # for checking defines we need to use the correct compiler flags
> > >  march_opt = '-march=@0@'.format(machine)
> > >
> > > +machine_args_cavium = [
> > > +	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
> > > +	['0xa1', ['-mcpu=thunderxt88']],
> > > +	['0xa2', ['-mcpu=thunderxt81']],
> > > +	['0xa3', ['-mcpu=thunderxt83']]]
> > > +
> > > +flags_cavium = [
> > > +	['RTE_MACHINE', '"thunderx"'],
> > > +	['RTE_CACHE_LINE_SIZE', 128],
> > > +	['RTE_MAX_NUMA_NODES', 2],
> > > +	['RTE_MAX_LCORE', 96],
> > > +	['RTE_MAX_VFIO_GROUPS', 128],
> > > +	['RTE_RING_USE_C11_MEM_MODEL', false]]
> > > +
> > > +impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
> > > +
> > > +dpdk_conf.set('RTE_TOOLCHAIN', '"gcc"')
> >
> > dpdk_conf.set_quoted() is probably what you want here.
> 
> Ah, will fix it in v4
> 
> >
> > > +dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
> > <snip>
> > > dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
> > > diff --git a/config/meson.build b/config/meson.build
> > > index fa55c53a5..f8c67578d 100644
> > > --- a/config/meson.build
> > > +++ b/config/meson.build
> > > @@ -8,7 +8,8 @@ else
> > >  	machine = get_option('machine')
> > >  endif
> > >  dpdk_conf.set('RTE_MACHINE', machine)
> > > -machine_arg = '-march=' + machine
> > > +machine_args = []
> > > +machine_args += '-march=' + machine
> > >
> > >  # use pthreads
> > >  add_project_link_arguments('-pthread', language: 'c')
> > > @@ -53,6 +54,14 @@ foreach arg: warning_flags
> > >  	endif
> > >  endforeach
> > >
> > > +# set other values pulled from the build options
> > > +dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
> > > +dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> > > +dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> > > +dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
> > > +# values which have defaults which may be overridden
> > > +dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> > > +
> > >  compile_time_cpuflags = []
> > >  if host_machine.cpu_family().startswith('x86')
> > >  	arch_subdir = 'x86'
> > > @@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
> > >  # set the install path for the drivers
> > >  dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
> > >
> > > -# set other values pulled from the build options
> > > -dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
> > > -dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> > > -dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> > > -dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
> > > -# values which have defaults which may be overridden
> > > -dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> > > -
> > Is there a reason why these lines have been moved?
> 
> I have moved them above so that they can be overridden by the arch specific
> scripts called by subdir(arch_subdir).
> Example RTE_MAX_VFIO_GROUPS needs to be 128 in thunderx.
> >
Missed that, yes, moving them is fine so.

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds
  2018-01-19 16:49     ` Hemant Agrawal
@ 2018-01-19 17:33       ` Bruce Richardson
  0 siblings, 0 replies; 30+ messages in thread
From: Bruce Richardson @ 2018-01-19 17:33 UTC (permalink / raw)
  To: Hemant Agrawal
  Cc: Pavan Nikhilesh, jerin.jacob, harry.van.haaren, herbert.guan,
	dev, Shreyansh Jain, Akhil Goyal

On Fri, Jan 19, 2018 at 04:49:04PM +0000, Hemant Agrawal wrote:
> HI Bruce,
> 	Are these planned for 18.02?  If so,  I will prioritize this work.
> 
> Regards,
> Hemant
> 
Hi Hemant,

yes, this is planned to be merged as *experimental* for 18.02. If no
feedback, I'll pull them as-is for 18.02 and we can fix appropriately in
18.05. I've verified at least that cross-compiling for arm works with
them applied, but the changes for detecting platform in the
non-cross-compile case I can't test, so your input on that would be
appreciated.

/Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev]  [PATCH v4 1/2] build: add support for ARM builds
  2017-12-19 10:53 [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds Bruce Richardson
                   ` (2 preceding siblings ...)
  2018-01-19 13:52 ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Pavan Nikhilesh
@ 2018-01-19 18:23 ` Pavan Nikhilesh
  2018-01-19 18:23   ` [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
  2018-01-22 11:46 ` [dpdk-dev] [PATCH v5 1/2] build: add support for ARM builds Pavan Nikhilesh
  2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
  5 siblings, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-19 18:23 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

From: Bruce Richardson <bruce.richardson@intel.com>

Add files to enable compiling for ARM cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.

        meson arm-build --cross-file aarch64_cross.txt
        ninja -C arm-build

where aarch64_cross.txt contained the following

        [binaries]
        c = 'aarch64-linux-gnu-gcc'
        cpp = 'aarch64-linux-gnu-cpp'
        ar = 'aarch64-linux-gnu-ar'

        [host_machine]
        system = 'linux'
        cpu_family = 'aarch64'
        cpu = 'armv8-a'
        endian = 'little'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---

 v4 Changes:
 - use set_quoted to set config instead of explicitly using quotes.

 v3 Changes:
 - Fix missing SPDX license tags

 v2 Changes:
 - Merged RFC patch.
 - Added framework to easily other vendor specific flags
 - renamed machine_arg to machine_args

 config/arm/meson.build                             | 36 ++++++++++++++++++++++
 config/meson.build                                 |  4 ++-
 lib/librte_eal/common/arch/arm/meson.build         |  5 +++
 lib/librte_eal/common/include/arch/arm/meson.build | 29 +++++++++++++++++
 4 files changed, 73 insertions(+), 1 deletion(-)
 create mode 100644 config/arm/meson.build
 create mode 100644 lib/librte_eal/common/arch/arm/meson.build
 create mode 100644 lib/librte_eal/common/include/arch/arm/meson.build

diff --git a/config/arm/meson.build b/config/arm/meson.build
new file mode 100644
index 000000000..f05de4c2c
--- /dev/null
+++ b/config/arm/meson.build
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+# Copyright(c) 2017 Cavium, Inc
+
+# for checking defines we need to use the correct compiler flags
+march_opt = '-march=@0@'.format(machine)
+
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
+if cc.sizeof('void *') == 8
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
+	dpdk_conf.set('RTE_ARCH_ARM', 1)
+	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+endif
+
+if cc.get_define('__ARM_NEON', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA2', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_AES', 'RTE_CPUFLAG_PMULL',
+	'RTE_CPUFLAG_SHA1', 'RTE_CPUFLAG_SHA2']
+endif
diff --git a/config/meson.build b/config/meson.build
index 95223042f..fa55c53a5 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -56,8 +56,10 @@ endforeach
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
-	subdir(arch_subdir)
+elif host_machine.cpu_family().startswith('arm') or host_machine.cpu_family().startswith('aarch')
+	arch_subdir = 'arm'
 endif
+subdir(arch_subdir)
 dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))

 # set the install path for the drivers
diff --git a/lib/librte_eal/common/arch/arm/meson.build b/lib/librte_eal/common/arch/arm/meson.build
new file mode 100644
index 000000000..c6bd92272
--- /dev/null
+++ b/lib/librte_eal/common/arch/arm/meson.build
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+eal_common_arch_sources = files('rte_cpuflags.c',
+	'rte_cycles.c')
diff --git a/lib/librte_eal/common/include/arch/arm/meson.build b/lib/librte_eal/common/include/arch/arm/meson.build
new file mode 100644
index 000000000..77893fa35
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm/meson.build
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+install_headers(
+	'rte_atomic_32.h',
+	'rte_atomic_64.h',
+	'rte_atomic.h',
+	'rte_byteorder.h',
+	'rte_cpuflags_32.h',
+	'rte_cpuflags_64.h',
+	'rte_cpuflags.h',
+	'rte_cycles_32.h',
+	'rte_cycles_64.h',
+	'rte_cycles.h',
+	'rte_io_64.h',
+	'rte_io.h',
+	'rte_memcpy_32.h',
+	'rte_memcpy_64.h',
+	'rte_memcpy.h',
+	'rte_pause_32.h',
+	'rte_pause_64.h',
+	'rte_pause.h',
+	'rte_prefetch_32.h',
+	'rte_prefetch_64.h',
+	'rte_prefetch.h',
+	'rte_rwlock.h',
+	'rte_spinlock.h',
+	'rte_vect.h',
+	subdir: get_option('include_subdir_arch'))
--
2.15.1

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march on ARM
  2018-01-19 18:23 ` [dpdk-dev] [PATCH v4 " Pavan Nikhilesh
@ 2018-01-19 18:23   ` Pavan Nikhilesh
  2018-01-22  5:52     ` Herbert Guan
  0 siblings, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-19 18:23 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 app/test-pmd/meson.build    |  2 +-
 config/arm/armv8_machine.py | 18 +++++++++++
 config/arm/meson.build      | 76 ++++++++++++++++++++++++++++++++++++++++-----
 config/meson.build          | 19 ++++++------
 drivers/meson.build         |  2 +-
 examples/meson.build        |  2 +-
 lib/meson.build             |  2 +-
 meson.build                 |  2 +-
 test/test/meson.build       |  2 +-
 9 files changed, 102 insertions(+), 23 deletions(-)
 create mode 100755 config/arm/armv8_machine.py

diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
index e819677a5..2a3f0ba1f 100644
--- a/app/test-pmd/meson.build
+++ b/app/test-pmd/meson.build
@@ -45,7 +45,7 @@ endif
 
 executable('dpdk-testpmd',
 	sources,
-	c_args: machine_arg,
+	c_args: machine_args,
 	link_whole: link_libs,
 	dependencies: dep_objs,
 	install_rpath: join_paths(get_option('prefix'), driver_install_path),
diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
new file mode 100755
index 000000000..404866d2f
--- /dev/null
+++ b/config/arm/armv8_machine.py
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Cavium, Inc
+
+ident = []
+fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
+with open(fname) as f:
+    content = f.read()
+
+midr_el1 = (int(content.rstrip('\n'), 16))
+
+ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
+ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
+ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
+ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
+ident.append(hex(midr_el1 & 0xF))           # Revision
+
+print(' '.join(ident))
diff --git a/config/arm/meson.build b/config/arm/meson.build
index f05de4c2c..1bed82236 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -5,28 +5,88 @@
 # for checking defines we need to use the correct compiler flags
 march_opt = '-march=@0@'.format(machine)
 
+machine_args_cavium = [
+	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
+	['0xa1', ['-mcpu=thunderxt88']],
+	['0xa2', ['-mcpu=thunderxt81']],
+	['0xa3', ['-mcpu=thunderxt83']]]
+
+flags_cavium = [
+	['RTE_MACHINE', '"thunderx"'],
+	['RTE_CACHE_LINE_SIZE', 128],
+	['RTE_MAX_NUMA_NODES', 2],
+	['RTE_MAX_LCORE', 96],
+	['RTE_MAX_VFIO_GROUPS', 128],
+	['RTE_RING_USE_C11_MEM_MODEL', false]]
+
+impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
+
+dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'gcc')
+dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
 dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
-if cc.sizeof('void *') == 8
-	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
-	dpdk_conf.set('RTE_ARCH_ARM64', 1)
-	dpdk_conf.set('RTE_ARCH_64', 1)
-else
+
+if cc.sizeof('void *') != 8
 	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
 	dpdk_conf.set('RTE_ARCH_ARM', 1)
 	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+
+	if not meson.is_cross_build()
+		# The script returns ['Implementor', 'Variant', 'Architecture',
+		# 'Primary Part number', 'Revision']
+		detect_vendor = find_program(join_paths(
+				meson.current_source_dir(), 'armv8_machine.py'))
+		cmd = run_command(detect_vendor.path())
+		if cmd.returncode() != 0
+			message('Using default armv8 config')
+		else
+			machine_args = [] # Clear previous machine args
+			cmd_output = cmd.stdout().strip().split(' ')
+			machine = get_variable('impl_' + cmd_output[0])
+			message('Implementor : ' + machine[0])
+
+			foreach flag: machine[1]
+				dpdk_conf.set(flag[0], flag[1])
+			endforeach
+
+			# Primary part number based mcpu flags are supported
+			# for gcc versions > 7
+			if cc.version().version_compare('<7.0')
+				foreach marg: machine[2]
+					if marg[0] == 'default'
+						foreach f: marg[1]
+							machine_args += f
+						endforeach
+					endif
+				endforeach
+			else
+				foreach marg: machine[2]
+					if marg[0] == cmd_output[3]
+						foreach f: marg[1]
+							machine_args += f
+						endforeach
+					endif
+				endforeach
+			endif
+		endif
+	endif
 endif
+message(machine_args)
 
-if cc.get_define('__ARM_NEON', args: march_opt) != ''
+if cc.get_define('__ARM_NEON', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRC32', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
diff --git a/config/meson.build b/config/meson.build
index fa55c53a5..f8c67578d 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -8,7 +8,8 @@ else
 	machine = get_option('machine')
 endif
 dpdk_conf.set('RTE_MACHINE', machine)
-machine_arg = '-march=' + machine
+machine_args = []
+machine_args += '-march=' + machine
 
 # use pthreads
 add_project_link_arguments('-pthread', language: 'c')
@@ -53,6 +54,14 @@ foreach arg: warning_flags
 	endif
 endforeach
 
+# set other values pulled from the build options
+dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
+dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
+dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
+dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
+# values which have defaults which may be overridden
+dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
+
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
@@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-# set other values pulled from the build options
-dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
-dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
-dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
-dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
-# values which have defaults which may be overridden
-dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
-
 install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
diff --git a/drivers/meson.build b/drivers/meson.build
index 9b5039847..1d6430bfe 100644
--- a/drivers/meson.build
+++ b/drivers/meson.build
@@ -22,7 +22,7 @@ foreach class:driver_classes
 		version = 1
 		sources = []
 		objs = []
-		cflags = [machine_arg]
+		cflags = machine_args
 		includes = [include_directories(drv_path)]
 		# set up internal deps. Drivers can append/override as necessary
 		deps = std_deps
diff --git a/examples/meson.build b/examples/meson.build
index 0abed7169..b3f997242 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -9,7 +9,7 @@ endif
 foreach example: get_option('examples').split(',')
 	name = example
 	sources = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	ext_deps = []
 	includes = [include_directories(example)]
 	deps = ['eal', 'mempool', 'net', 'mbuf', 'ethdev', 'cmdline']
diff --git a/lib/meson.build b/lib/meson.build
index 0c94d74b9..b9ea6f61b 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -31,7 +31,7 @@ foreach l:libraries
 	sources = []
 	headers = []
 	includes = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	objs = [] # other object files to link against, used e.g. for
 	          # instruction-set optimized versions of code
 
diff --git a/meson.build b/meson.build
index 3dce8579e..326fbc7d1 100644
--- a/meson.build
+++ b/meson.build
@@ -66,5 +66,5 @@ pkg.generate(name: meson.project_name(),
 			['-Wl,-Bdynamic'] + dpdk_extra_ldflags,
 	description: 'The Data Plane Development Kit (DPDK)',
 	subdirs: [get_option('include_subdir_arch'), '.'],
-	extra_cflags: ['-include "rte_config.h"', machine_arg]
+	extra_cflags: ['-include "rte_config.h"'] + machine_args
 )
diff --git a/test/test/meson.build b/test/test/meson.build
index 1863c603c..873efbc07 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -204,7 +204,7 @@ if get_option('tests')
 		test_sources,
 		link_whole: link_libs,
 		dependencies: test_dep_objs,
-		c_args: machine_arg,
+		c_args: machine_args,
 		install_rpath: driver_install_path,
 		install: false)
 
-- 
2.15.1

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march on ARM
  2018-01-19 18:23   ` [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
@ 2018-01-22  5:52     ` Herbert Guan
  2018-01-22  7:16       ` Pavan Nikhilesh
  0 siblings, 1 reply; 30+ messages in thread
From: Herbert Guan @ 2018-01-22  5:52 UTC (permalink / raw)
  To: Pavan Nikhilesh, jerin.jacob, bruce.richardson, harry.van.haaren,
	hemant.agrawal
  Cc: dev, nd

Hi, Pavan

Please see my notes inline.

Best regards,
Herbert

> -----Original Message-----
> From: Pavan Nikhilesh [mailto:pbhagavatula@caviumnetworks.com]
> Sent: Saturday, January 20, 2018 2:24
> To: jerin.jacob@caviumnetworks.com; bruce.richardson@intel.com;
> harry.van.haaren@intel.com; Herbert Guan <Herbert.Guan@arm.com>;
> hemant.agrawal@nxp.com
> Cc: dev@dpdk.org; Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> Subject: [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march
> on ARM
> 
> Added support for detecting march and mcpu by reading midr_el1 register.
> The implementer, primary part number values read can be used to figure out
> the underlying arm cpu.
> 
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> ---
>  app/test-pmd/meson.build    |  2 +-
>  config/arm/armv8_machine.py | 18 +++++++++++
>  config/arm/meson.build      | 76
> ++++++++++++++++++++++++++++++++++++++++-----
>  config/meson.build          | 19 ++++++------
>  drivers/meson.build         |  2 +-
>  examples/meson.build        |  2 +-
>  lib/meson.build             |  2 +-
>  meson.build                 |  2 +-
>  test/test/meson.build       |  2 +-
>  9 files changed, 102 insertions(+), 23 deletions(-)  create mode 100755
> config/arm/armv8_machine.py
> 
> diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index
> e819677a5..2a3f0ba1f 100644
> --- a/app/test-pmd/meson.build
> +++ b/app/test-pmd/meson.build
> @@ -45,7 +45,7 @@ endif
> 
>  executable('dpdk-testpmd',
>  	sources,
> -	c_args: machine_arg,
> +	c_args: machine_args,
>  	link_whole: link_libs,
>  	dependencies: dep_objs,
>  	install_rpath: join_paths(get_option('prefix'), driver_install_path),
> diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
> new file mode 100755 index 000000000..404866d2f
> --- /dev/null
> +++ b/config/arm/armv8_machine.py
> @@ -0,0 +1,18 @@
> +#!/usr/bin/python
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Cavium, Inc
> +
> +ident = []
> +fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
> +with open(fname) as f:
> +    content = f.read()
> +
> +midr_el1 = (int(content.rstrip('\n'), 16))
> +
> +ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
> +ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
> +ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
> +ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
> +ident.append(hex(midr_el1 & 0xF))           # Revision
> +
> +print(' '.join(ident))
> diff --git a/config/arm/meson.build b/config/arm/meson.build index
> f05de4c2c..1bed82236 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -5,28 +5,88 @@
>  # for checking defines we need to use the correct compiler flags  march_opt
> = '-march=@0@'.format(machine)
> 
> +machine_args_cavium = [
> +	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
> +	['0xa1', ['-mcpu=thunderxt88']],
> +	['0xa2', ['-mcpu=thunderxt81']],
> +	['0xa3', ['-mcpu=thunderxt83']]]
> +
> +flags_cavium = [
> +	['RTE_MACHINE', '"thunderx"'],
> +	['RTE_CACHE_LINE_SIZE', 128],
> +	['RTE_MAX_NUMA_NODES', 2],
> +	['RTE_MAX_LCORE', 96],
> +	['RTE_MAX_VFIO_GROUPS', 128],
> +	['RTE_RING_USE_C11_MEM_MODEL', false]]
> +
> +impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]

There're only Cavimu args/flags defined, so other arm/arm64 platforms will fail at detecting.  Can you add one entry for default?

> +
> +dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'gcc')
> +dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
>  dpdk_conf.set('RTE_FORCE_INTRINSICS', 1) -if cc.sizeof('void *') == 8
> -	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> -	dpdk_conf.set('RTE_ARCH_ARM64', 1)
> -	dpdk_conf.set('RTE_ARCH_64', 1)
> -else
> +
> +if cc.sizeof('void *') != 8
>  	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
>  	dpdk_conf.set('RTE_ARCH_ARM', 1)
>  	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
> +else
> +	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> +	dpdk_conf.set('RTE_ARCH_ARM64', 1)
> +	dpdk_conf.set('RTE_ARCH_64', 1)
> +
> +	if not meson.is_cross_build()
> +		# The script returns ['Implementor', 'Variant', 'Architecture',
> +		# 'Primary Part number', 'Revision']
> +		detect_vendor = find_program(join_paths(
> +				meson.current_source_dir(),
> 'armv8_machine.py'))
> +		cmd = run_command(detect_vendor.path())
> +		if cmd.returncode() != 0
> +			message('Using default armv8 config')
> +		else
> +			machine_args = [] # Clear previous machine args
> +			cmd_output = cmd.stdout().strip().split(' ')
> +			machine = get_variable('impl_' + cmd_output[0])

Script will fail for non-cavium Arm platforms.  We need to check if cmd_output[0] is a known value in a list, otherwise should go to default entry.

> +			message('Implementor : ' + machine[0])
> +
> +			foreach flag: machine[1]
> +				dpdk_conf.set(flag[0], flag[1])
> +			endforeach
> +
> +			# Primary part number based mcpu flags are
> supported
> +			# for gcc versions > 7
> +			if cc.version().version_compare('<7.0')
> +				foreach marg: machine[2]
> +					if marg[0] == 'default'
> +						foreach f: marg[1]
> +							machine_args += f
> +						endforeach
> +					endif
> +				endforeach
> +			else
> +				foreach marg: machine[2]
> +					if marg[0] == cmd_output[3]
> +						foreach f: marg[1]
> +							machine_args += f
> +						endforeach
> +					endif
> +				endforeach
> +			endif
> +		endif
> +	endif
>  endif
> +message(machine_args)
> 
> -if cc.get_define('__ARM_NEON', args: march_opt) != ''
> +if cc.get_define('__ARM_NEON', args: machine_args) != ''
>  	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
>  	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']  endif
> 
> -if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
> +if cc.get_define('__ARM_FEATURE_CRC32', args: machine_args) != ''
>  	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
>  	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']  endif
> 
> -if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
> +if cc.get_define('__ARM_FEATURE_CRYPTO', args: machine_args) != ''
>  	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
>  	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
>  	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1) diff --git
> a/config/meson.build b/config/meson.build index fa55c53a5..f8c67578d
> 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -8,7 +8,8 @@ else
>  	machine = get_option('machine')
>  endif
>  dpdk_conf.set('RTE_MACHINE', machine)
> -machine_arg = '-march=' + machine
> +machine_args = []
> +machine_args += '-march=' + machine
> 
>  # use pthreads
>  add_project_link_arguments('-pthread', language: 'c') @@ -53,6 +54,14 @@
> foreach arg: warning_flags
>  	endif
>  endforeach
> 
> +# set other values pulled from the build options
> +dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
> +dpdk_conf.set('RTE_MAX_NUMA_NODES',
> get_option('max_numa_nodes'))
> +dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> +dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID',
> +get_option('allow_invalid_socket_id'))
> +# values which have defaults which may be overridden
> +dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> +
>  compile_time_cpuflags = []
>  if host_machine.cpu_family().startswith('x86')
>  	arch_subdir = 'x86'
> @@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS',
> ','.join(compile_time_cpuflags))  # set the install path for the drivers
> dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
> 
> -# set other values pulled from the build options -
> dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores')) -
> dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> -dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet')) -
> dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID',
> get_option('allow_invalid_socket_id'))
> -# values which have defaults which may be overridden -
> dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> -
>  install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
> diff --git a/drivers/meson.build b/drivers/meson.build index
> 9b5039847..1d6430bfe 100644
> --- a/drivers/meson.build
> +++ b/drivers/meson.build
> @@ -22,7 +22,7 @@ foreach class:driver_classes
>  		version = 1
>  		sources = []
>  		objs = []
> -		cflags = [machine_arg]
> +		cflags = machine_args
>  		includes = [include_directories(drv_path)]
>  		# set up internal deps. Drivers can append/override as
> necessary
>  		deps = std_deps
> diff --git a/examples/meson.build b/examples/meson.build index
> 0abed7169..b3f997242 100644
> --- a/examples/meson.build
> +++ b/examples/meson.build
> @@ -9,7 +9,7 @@ endif
>  foreach example: get_option('examples').split(',')
>  	name = example
>  	sources = []
> -	cflags = [machine_arg]
> +	cflags = machine_args
>  	ext_deps = []
>  	includes = [include_directories(example)]
>  	deps = ['eal', 'mempool', 'net', 'mbuf', 'ethdev', 'cmdline'] diff --git
> a/lib/meson.build b/lib/meson.build index 0c94d74b9..b9ea6f61b 100644
> --- a/lib/meson.build
> +++ b/lib/meson.build
> @@ -31,7 +31,7 @@ foreach l:libraries
>  	sources = []
>  	headers = []
>  	includes = []
> -	cflags = [machine_arg]
> +	cflags = machine_args
>  	objs = [] # other object files to link against, used e.g. for
>  	          # instruction-set optimized versions of code
> 
> diff --git a/meson.build b/meson.build
> index 3dce8579e..326fbc7d1 100644
> --- a/meson.build
> +++ b/meson.build
> @@ -66,5 +66,5 @@ pkg.generate(name: meson.project_name(),
>  			['-Wl,-Bdynamic'] + dpdk_extra_ldflags,
>  	description: 'The Data Plane Development Kit (DPDK)',
>  	subdirs: [get_option('include_subdir_arch'), '.'],
> -	extra_cflags: ['-include "rte_config.h"', machine_arg]
> +	extra_cflags: ['-include "rte_config.h"'] + machine_args
>  )
> diff --git a/test/test/meson.build b/test/test/meson.build index
> 1863c603c..873efbc07 100644
> --- a/test/test/meson.build
> +++ b/test/test/meson.build
> @@ -204,7 +204,7 @@ if get_option('tests')
>  		test_sources,
>  		link_whole: link_libs,
>  		dependencies: test_dep_objs,
> -		c_args: machine_arg,
> +		c_args: machine_args,
>  		install_rpath: driver_install_path,
>  		install: false)
> 
> --
> 2.15.1

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march on ARM
  2018-01-22  5:52     ` Herbert Guan
@ 2018-01-22  7:16       ` Pavan Nikhilesh
  0 siblings, 0 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22  7:16 UTC (permalink / raw)
  To: Herbert Guan, jerin.jacob, bruce.richardson, harry.van.haaren,
	hemant.agrawal
  Cc: dev, nd

Hi Herbert,

Thanks for the review, will add a default entry for generic arm.

On Mon, Jan 22, 2018 at 05:52:36AM +0000, Herbert Guan wrote:
> Hi, Pavan
>
> Please see my notes inline.
>
> Best regards,
> Herbert
>
> > -----Original Message-----
> > From: Pavan Nikhilesh [mailto:pbhagavatula@caviumnetworks.com]
> > Sent: Saturday, January 20, 2018 2:24
> > To: jerin.jacob@caviumnetworks.com; bruce.richardson@intel.com;
> > harry.van.haaren@intel.com; Herbert Guan <Herbert.Guan@arm.com>;
> > hemant.agrawal@nxp.com
> > Cc: dev@dpdk.org; Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > Subject: [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march
> > on ARM
> >
> > Added support for detecting march and mcpu by reading midr_el1 register.
> > The implementer, primary part number values read can be used to figure out
> > the underlying arm cpu.
> >
> > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > ---
<snip>
> > +impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
>
> There're only Cavimu args/flags defined, so other arm/arm64 platforms will fail at detecting.  Can you add one entry for default?
>
> > +
> > +dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'gcc')
> > +dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
> >  dpdk_conf.set('RTE_FORCE_INTRINSICS', 1) -if cc.sizeof('void *') == 8
> > -	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> > -	dpdk_conf.set('RTE_ARCH_ARM64', 1)
> > -	dpdk_conf.set('RTE_ARCH_64', 1)
> > -else
> > +
> > +if cc.sizeof('void *') != 8
> >  	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
> >  	dpdk_conf.set('RTE_ARCH_ARM', 1)
> >  	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
> > +else
> > +	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> > +	dpdk_conf.set('RTE_ARCH_ARM64', 1)
> > +	dpdk_conf.set('RTE_ARCH_64', 1)
> > +
> > +	if not meson.is_cross_build()
> > +		# The script returns ['Implementor', 'Variant', 'Architecture',
> > +		# 'Primary Part number', 'Revision']
> > +		detect_vendor = find_program(join_paths(
> > +				meson.current_source_dir(),
> > 'armv8_machine.py'))
> > +		cmd = run_command(detect_vendor.path())
> > +		if cmd.returncode() != 0
> > +			message('Using default armv8 config')
> > +		else
> > +			machine_args = [] # Clear previous machine args
> > +			cmd_output = cmd.stdout().strip().split(' ')
> > +			machine = get_variable('impl_' + cmd_output[0])
>
> Script will fail for non-cavium Arm platforms.  We need to check if cmd_output[0] is a known value in a list, otherwise should go to default entry.
>
> > +			message('Implementor : ' + machine[0])
> > +

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev]  [PATCH v5 1/2] build: add support for ARM builds
  2017-12-19 10:53 [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds Bruce Richardson
                   ` (3 preceding siblings ...)
  2018-01-19 18:23 ` [dpdk-dev] [PATCH v4 " Pavan Nikhilesh
@ 2018-01-22 11:46 ` Pavan Nikhilesh
  2018-01-22 11:46   ` [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
  2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
  5 siblings, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 11:46 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

From: Bruce Richardson <bruce.richardson@intel.com>

Add files to enable compiling for ARM cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.

        meson arm-build --cross-file aarch64_cross.txt
        ninja -C arm-build

where aarch64_cross.txt contained the following

        [binaries]
        c = 'aarch64-linux-gnu-gcc'
        cpp = 'aarch64-linux-gnu-cpp'
        ar = 'aarch64-linux-gnu-ar'

        [host_machine]
        system = 'linux'
        cpu_family = 'aarch64'
        cpu = 'armv8-a'
        endian = 'little'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---

 v5 Changes:
 - Use generic_armv8 config when script returns unknows machine args

 v4 Changes:
 - use set_quoted to set config instead of explicitly using quotes.

 v3 Changes:
 - Fix missing SPDX license tags

 v2 Changes:
 - Merged RFC patch.
 - Added framework to easily other vendor specific flags
 - renamed machine_arg to machine_args

 config/arm/meson.build                             | 36 ++++++++++++++++++++++
 config/meson.build                                 |  4 ++-
 lib/librte_eal/common/arch/arm/meson.build         |  5 +++
 lib/librte_eal/common/include/arch/arm/meson.build | 29 +++++++++++++++++
 4 files changed, 73 insertions(+), 1 deletion(-)
 create mode 100644 config/arm/meson.build
 create mode 100644 lib/librte_eal/common/arch/arm/meson.build
 create mode 100644 lib/librte_eal/common/include/arch/arm/meson.build

diff --git a/config/arm/meson.build b/config/arm/meson.build
new file mode 100644
index 000000000..f05de4c2c
--- /dev/null
+++ b/config/arm/meson.build
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+# Copyright(c) 2017 Cavium, Inc
+
+# for checking defines we need to use the correct compiler flags
+march_opt = '-march=@0@'.format(machine)
+
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
+if cc.sizeof('void *') == 8
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
+	dpdk_conf.set('RTE_ARCH_ARM', 1)
+	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+endif
+
+if cc.get_define('__ARM_NEON', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA2', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_AES', 'RTE_CPUFLAG_PMULL',
+	'RTE_CPUFLAG_SHA1', 'RTE_CPUFLAG_SHA2']
+endif
diff --git a/config/meson.build b/config/meson.build
index 95223042f..fa55c53a5 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -56,8 +56,10 @@ endforeach
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
-	subdir(arch_subdir)
+elif host_machine.cpu_family().startswith('arm') or host_machine.cpu_family().startswith('aarch')
+	arch_subdir = 'arm'
 endif
+subdir(arch_subdir)
 dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))

 # set the install path for the drivers
diff --git a/lib/librte_eal/common/arch/arm/meson.build b/lib/librte_eal/common/arch/arm/meson.build
new file mode 100644
index 000000000..c6bd92272
--- /dev/null
+++ b/lib/librte_eal/common/arch/arm/meson.build
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+eal_common_arch_sources = files('rte_cpuflags.c',
+	'rte_cycles.c')
diff --git a/lib/librte_eal/common/include/arch/arm/meson.build b/lib/librte_eal/common/include/arch/arm/meson.build
new file mode 100644
index 000000000..77893fa35
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm/meson.build
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+install_headers(
+	'rte_atomic_32.h',
+	'rte_atomic_64.h',
+	'rte_atomic.h',
+	'rte_byteorder.h',
+	'rte_cpuflags_32.h',
+	'rte_cpuflags_64.h',
+	'rte_cpuflags.h',
+	'rte_cycles_32.h',
+	'rte_cycles_64.h',
+	'rte_cycles.h',
+	'rte_io_64.h',
+	'rte_io.h',
+	'rte_memcpy_32.h',
+	'rte_memcpy_64.h',
+	'rte_memcpy.h',
+	'rte_pause_32.h',
+	'rte_pause_64.h',
+	'rte_pause.h',
+	'rte_prefetch_32.h',
+	'rte_prefetch_64.h',
+	'rte_prefetch.h',
+	'rte_rwlock.h',
+	'rte_spinlock.h',
+	'rte_vect.h',
+	subdir: get_option('include_subdir_arch'))
--
2.16.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM
  2018-01-22 11:46 ` [dpdk-dev] [PATCH v5 1/2] build: add support for ARM builds Pavan Nikhilesh
@ 2018-01-22 11:46   ` Pavan Nikhilesh
  2018-01-22 12:30     ` Bruce Richardson
  0 siblings, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 11:46 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 app/test-pmd/meson.build    |  2 +-
 config/arm/armv8_machine.py | 18 +++++++++
 config/arm/meson.build      | 95 +++++++++++++++++++++++++++++++++++++++++----
 config/meson.build          | 19 ++++-----
 drivers/meson.build         |  2 +-
 examples/meson.build        |  2 +-
 lib/meson.build             |  2 +-
 meson.build                 |  2 +-
 test/test/meson.build       |  2 +-
 9 files changed, 121 insertions(+), 23 deletions(-)
 create mode 100755 config/arm/armv8_machine.py

diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
index e819677a5..2a3f0ba1f 100644
--- a/app/test-pmd/meson.build
+++ b/app/test-pmd/meson.build
@@ -45,7 +45,7 @@ endif
 
 executable('dpdk-testpmd',
 	sources,
-	c_args: machine_arg,
+	c_args: machine_args,
 	link_whole: link_libs,
 	dependencies: dep_objs,
 	install_rpath: join_paths(get_option('prefix'), driver_install_path),
diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
new file mode 100755
index 000000000..404866d2f
--- /dev/null
+++ b/config/arm/armv8_machine.py
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Cavium, Inc
+
+ident = []
+fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
+with open(fname) as f:
+    content = f.read()
+
+midr_el1 = (int(content.rstrip('\n'), 16))
+
+ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
+ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
+ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
+ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
+ident.append(hex(midr_el1 & 0xF))           # Revision
+
+print(' '.join(ident))
diff --git a/config/arm/meson.build b/config/arm/meson.build
index f05de4c2c..212b94499 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -5,28 +5,107 @@
 # for checking defines we need to use the correct compiler flags
 march_opt = '-march=@0@'.format(machine)
 
-dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
-if cc.sizeof('void *') == 8
-	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
-	dpdk_conf.set('RTE_ARCH_ARM64', 1)
-	dpdk_conf.set('RTE_ARCH_64', 1)
+machine_args_generic = [
+	['default', ['-march=armv8-a+crc+crypto']]]
+machine_args_cavium = [
+	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
+	['0xa1', ['-mcpu=thunderxt88']],
+	['0xa2', ['-mcpu=thunderxt81']],
+	['0xa3', ['-mcpu=thunderxt83']]]
+
+flags_generic = [[]]
+flags_cavium = [
+	['RTE_MACHINE', '"thunderx"'],
+	['RTE_CACHE_LINE_SIZE', 128],
+	['RTE_MAX_NUMA_NODES', 2],
+	['RTE_MAX_LCORE', 96],
+	['RTE_MAX_VFIO_GROUPS', 128],
+	['RTE_RING_USE_C11_MEM_MODEL', false]]
+
+impl_generic = ['Generic armv8', flags_generic, machine_args_generic]
+impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
+
+if cc.get_define('__clang__') != ''
+	dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'clang')
+	dpdk_conf.set('RTE_TOOLCHAIN_CLANG', 1)
 else
+	dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'gcc')
+	dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
+endif
+
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
+
+if cc.sizeof('void *') != 8
 	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
 	dpdk_conf.set('RTE_ARCH_ARM', 1)
 	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+
+	machine = []
+	cmd_generic = ['generic', '', '', 'default', '']
+	cmd_output = cmd_generic # Set generic by default
+	machine_args = [] # Clear previous machine args
+	if not meson.is_cross_build()
+		# The script returns ['Implementer', 'Variant', 'Architecture',
+		# 'Primary Part number', 'Revision']
+		detect_vendor = find_program(join_paths(
+				meson.current_source_dir(), 'armv8_machine.py'))
+		cmd = run_command(detect_vendor.path())
+		if cmd.returncode() == 0
+			cmd_output = cmd.stdout().strip().split(' ')
+		endif
+		# Set to generic if variable is not found
+		machine = get_variable('impl_' + cmd_output[0], 'generic')
+	endif
+
+	if machine == 'generic'
+		machine = impl_generic
+		cmd_output = cmd_generic
+	endif
+
+	message('Implementer : ' + machine[0])
+	foreach flag: machine[1]
+		if flag.length() > 0
+			dpdk_conf.set(flag[0], flag[1])
+		endif
+	endforeach
+	# Primary part number based mcpu flags are supported
+	# for gcc versions > 7
+	if cc.version().version_compare(
+			'<7.0') or cmd_output.length() == 0
+		foreach marg: machine[2]
+			if marg[0] == 'default'
+				foreach f: marg[1]
+					machine_args += f
+				endforeach
+			endif
+		endforeach
+	else
+		foreach marg: machine[2]
+			if marg[0] == cmd_output[3]
+				foreach f: marg[1]
+					machine_args += f
+				endforeach
+			endif
+		endforeach
+	endif
 endif
+message(machine_args)
 
-if cc.get_define('__ARM_NEON', args: march_opt) != ''
+if cc.get_define('__ARM_NEON', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRC32', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
diff --git a/config/meson.build b/config/meson.build
index fa55c53a5..f8c67578d 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -8,7 +8,8 @@ else
 	machine = get_option('machine')
 endif
 dpdk_conf.set('RTE_MACHINE', machine)
-machine_arg = '-march=' + machine
+machine_args = []
+machine_args += '-march=' + machine
 
 # use pthreads
 add_project_link_arguments('-pthread', language: 'c')
@@ -53,6 +54,14 @@ foreach arg: warning_flags
 	endif
 endforeach
 
+# set other values pulled from the build options
+dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
+dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
+dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
+dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
+# values which have defaults which may be overridden
+dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
+
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
@@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-# set other values pulled from the build options
-dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
-dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
-dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
-dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
-# values which have defaults which may be overridden
-dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
-
 install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
diff --git a/drivers/meson.build b/drivers/meson.build
index 9b5039847..1d6430bfe 100644
--- a/drivers/meson.build
+++ b/drivers/meson.build
@@ -22,7 +22,7 @@ foreach class:driver_classes
 		version = 1
 		sources = []
 		objs = []
-		cflags = [machine_arg]
+		cflags = machine_args
 		includes = [include_directories(drv_path)]
 		# set up internal deps. Drivers can append/override as necessary
 		deps = std_deps
diff --git a/examples/meson.build b/examples/meson.build
index 0abed7169..b3f997242 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -9,7 +9,7 @@ endif
 foreach example: get_option('examples').split(',')
 	name = example
 	sources = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	ext_deps = []
 	includes = [include_directories(example)]
 	deps = ['eal', 'mempool', 'net', 'mbuf', 'ethdev', 'cmdline']
diff --git a/lib/meson.build b/lib/meson.build
index 0c94d74b9..b9ea6f61b 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -31,7 +31,7 @@ foreach l:libraries
 	sources = []
 	headers = []
 	includes = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	objs = [] # other object files to link against, used e.g. for
 	          # instruction-set optimized versions of code
 
diff --git a/meson.build b/meson.build
index 3dce8579e..326fbc7d1 100644
--- a/meson.build
+++ b/meson.build
@@ -66,5 +66,5 @@ pkg.generate(name: meson.project_name(),
 			['-Wl,-Bdynamic'] + dpdk_extra_ldflags,
 	description: 'The Data Plane Development Kit (DPDK)',
 	subdirs: [get_option('include_subdir_arch'), '.'],
-	extra_cflags: ['-include "rte_config.h"', machine_arg]
+	extra_cflags: ['-include "rte_config.h"'] + machine_args
 )
diff --git a/test/test/meson.build b/test/test/meson.build
index 1863c603c..873efbc07 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -204,7 +204,7 @@ if get_option('tests')
 		test_sources,
 		link_whole: link_libs,
 		dependencies: test_dep_objs,
-		c_args: machine_arg,
+		c_args: machine_args,
 		install_rpath: driver_install_path,
 		install: false)
 
-- 
2.16.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM
  2018-01-22 11:46   ` [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
@ 2018-01-22 12:30     ` Bruce Richardson
  2018-01-22 12:37       ` Pavan Nikhilesh
  0 siblings, 1 reply; 30+ messages in thread
From: Bruce Richardson @ 2018-01-22 12:30 UTC (permalink / raw)
  To: Pavan Nikhilesh
  Cc: jerin.jacob, harry.van.haaren, herbert.guan, hemant.agrawal, dev

On Mon, Jan 22, 2018 at 05:16:49PM +0530, Pavan Nikhilesh wrote:
> Added support for detecting march and mcpu by reading midr_el1 register.
> The implementer, primary part number values read can be used to figure
> out the underlying arm cpu.
> 
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> ---
>  app/test-pmd/meson.build    |  2 +-
>  config/arm/armv8_machine.py | 18 +++++++++
>  config/arm/meson.build      | 95 +++++++++++++++++++++++++++++++++++++++++----
>  config/meson.build          | 19 ++++-----
>  drivers/meson.build         |  2 +-
>  examples/meson.build        |  2 +-
>  lib/meson.build             |  2 +-
>  meson.build                 |  2 +-
>  test/test/meson.build       |  2 +-
>  9 files changed, 121 insertions(+), 23 deletions(-)
>  create mode 100755 config/arm/armv8_machine.py
> 
> diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
> index e819677a5..2a3f0ba1f 100644
> --- a/app/test-pmd/meson.build
> +++ b/app/test-pmd/meson.build
> @@ -45,7 +45,7 @@ endif
>  
>  executable('dpdk-testpmd',
>  	sources,
> -	c_args: machine_arg,
> +	c_args: machine_args,
>  	link_whole: link_libs,
>  	dependencies: dep_objs,
>  	install_rpath: join_paths(get_option('prefix'), driver_install_path),
> diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
> new file mode 100755
> index 000000000..404866d2f
> --- /dev/null
> +++ b/config/arm/armv8_machine.py
> @@ -0,0 +1,18 @@
> +#!/usr/bin/python
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2017 Cavium, Inc
> +
> +ident = []
> +fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
> +with open(fname) as f:
> +    content = f.read()
> +
> +midr_el1 = (int(content.rstrip('\n'), 16))
> +
> +ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
> +ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
> +ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
> +ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
> +ident.append(hex(midr_el1 & 0xF))           # Revision
> +
> +print(' '.join(ident))
> diff --git a/config/arm/meson.build b/config/arm/meson.build
> index f05de4c2c..212b94499 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -5,28 +5,107 @@
>  # for checking defines we need to use the correct compiler flags
>  march_opt = '-march=@0@'.format(machine)
>  
> -dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
> -if cc.sizeof('void *') == 8
> -	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> -	dpdk_conf.set('RTE_ARCH_ARM64', 1)
> -	dpdk_conf.set('RTE_ARCH_64', 1)
> +machine_args_generic = [
> +	['default', ['-march=armv8-a+crc+crypto']]]
> +machine_args_cavium = [
> +	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
> +	['0xa1', ['-mcpu=thunderxt88']],
> +	['0xa2', ['-mcpu=thunderxt81']],
> +	['0xa3', ['-mcpu=thunderxt83']]]
> +
> +flags_generic = [[]]
> +flags_cavium = [
> +	['RTE_MACHINE', '"thunderx"'],
> +	['RTE_CACHE_LINE_SIZE', 128],
> +	['RTE_MAX_NUMA_NODES', 2],
> +	['RTE_MAX_LCORE', 96],
> +	['RTE_MAX_VFIO_GROUPS', 128],
> +	['RTE_RING_USE_C11_MEM_MODEL', false]]
> +
> +impl_generic = ['Generic armv8', flags_generic, machine_args_generic]
> +impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
> +
> +if cc.get_define('__clang__') != ''
> +	dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'clang')
> +	dpdk_conf.set('RTE_TOOLCHAIN_CLANG', 1)
>  else
> +	dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'gcc')
> +	dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
> +endif
> +
> +dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
> +
> +if cc.sizeof('void *') != 8
>  	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
>  	dpdk_conf.set('RTE_ARCH_ARM', 1)
>  	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
> +else
> +	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> +	dpdk_conf.set('RTE_ARCH_ARM64', 1)
> +	dpdk_conf.set('RTE_ARCH_64', 1)
> +
> +	machine = []
> +	cmd_generic = ['generic', '', '', 'default', '']
> +	cmd_output = cmd_generic # Set generic by default
> +	machine_args = [] # Clear previous machine args
> +	if not meson.is_cross_build()
> +		# The script returns ['Implementer', 'Variant', 'Architecture',
> +		# 'Primary Part number', 'Revision']
> +		detect_vendor = find_program(join_paths(
> +				meson.current_source_dir(), 'armv8_machine.py'))
> +		cmd = run_command(detect_vendor.path())
> +		if cmd.returncode() == 0
> +			cmd_output = cmd.stdout().strip().split(' ')
> +		endif
> +		# Set to generic if variable is not found
> +		machine = get_variable('impl_' + cmd_output[0], 'generic')
> +	endif
> +
> +	if machine == 'generic'
> +		machine = impl_generic
> +		cmd_output = cmd_generic
> +	endif
> +
> +	message('Implementer : ' + machine[0])

When cross-compiling for arm I get an error at this line:

  Meson encountered an error in file config/arm/meson.build, line 69, column 1:
  Index 0 out of bounds of array of size 0.

Regards,
/Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM
  2018-01-22 12:30     ` Bruce Richardson
@ 2018-01-22 12:37       ` Pavan Nikhilesh
  2018-01-22 14:09         ` Bruce Richardson
  0 siblings, 1 reply; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 12:37 UTC (permalink / raw)
  To: Bruce Richardson, jerin.jacob, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev

On Mon, Jan 22, 2018 at 12:30:53PM +0000, Bruce Richardson wrote:
> On Mon, Jan 22, 2018 at 05:16:49PM +0530, Pavan Nikhilesh wrote:
> > Added support for detecting march and mcpu by reading midr_el1 register.
> > The implementer, primary part number values read can be used to figure
> > out the underlying arm cpu.
> >
> > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > ---
> >  app/test-pmd/meson.build    |  2 +-
> >  config/arm/armv8_machine.py | 18 +++++++++
> >  config/arm/meson.build      | 95 +++++++++++++++++++++++++++++++++++++++++----
> >  config/meson.build          | 19 ++++-----
> >  drivers/meson.build         |  2 +-
> >  examples/meson.build        |  2 +-
> >  lib/meson.build             |  2 +-
> >  meson.build                 |  2 +-
> >  test/test/meson.build       |  2 +-
> >  9 files changed, 121 insertions(+), 23 deletions(-)
> >  create mode 100755 config/arm/armv8_machine.py
> >
<snip>
> > +
> > +	if machine == 'generic'
> > +		machine = impl_generic
> > +		cmd_output = cmd_generic
> > +	endif
> > +
> > +	message('Implementer : ' + machine[0])
>
> When cross-compiling for arm I get an error at this line:
>
>   Meson encountered an error in file config/arm/meson.build, line 69, column 1:
>   Index 0 out of bounds of array of size 0.
>
Will be sending v2 of the cross patch soon(once directory structure and file
name is fininlized) that would resolve this issue.

> Regards,
> /Bruce

Thanks,
Pavan.
>
>

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM
  2018-01-22 12:37       ` Pavan Nikhilesh
@ 2018-01-22 14:09         ` Bruce Richardson
  2018-01-22 14:44           ` Pavan Nikhilesh
  0 siblings, 1 reply; 30+ messages in thread
From: Bruce Richardson @ 2018-01-22 14:09 UTC (permalink / raw)
  To: Pavan Nikhilesh
  Cc: jerin.jacob, harry.van.haaren, herbert.guan, hemant.agrawal, dev

On Mon, Jan 22, 2018 at 06:07:18PM +0530, Pavan Nikhilesh wrote:
> On Mon, Jan 22, 2018 at 12:30:53PM +0000, Bruce Richardson wrote:
> > On Mon, Jan 22, 2018 at 05:16:49PM +0530, Pavan Nikhilesh wrote:
> > > Added support for detecting march and mcpu by reading midr_el1
> > > register.  The implementer, primary part number values read can be
> > > used to figure out the underlying arm cpu.
> > >
> > > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > > --- app/test-pmd/meson.build    |  2 +-
> > > config/arm/armv8_machine.py | 18 +++++++++ config/arm/meson.build
> > > | 95 +++++++++++++++++++++++++++++++++++++++++----
> > > config/meson.build          | 19 ++++----- drivers/meson.build
> > > |  2 +- examples/meson.build        |  2 +- lib/meson.build
> > > |  2 +- meson.build                 |  2 +- test/test/meson.build
> > > |  2 +- 9 files changed, 121 insertions(+), 23 deletions(-) create
> > > mode 100755 config/arm/armv8_machine.py
> > >
> <snip>
> > > + +	if machine == 'generic' +		machine =
> > > impl_generic +		cmd_output = cmd_generic +	endif +
> > > +	message('Implementer : ' + machine[0])
> >
> > When cross-compiling for arm I get an error at this line:
> >
> >   Meson encountered an error in file config/arm/meson.build, line
> >   69, column 1: Index 0 out of bounds of array of size 0.
> >
> Will be sending v2 of the cross patch soon(once directory structure
> and file name is fininlized) that would resolve this issue.
> 
So is there an expected patch ordering here? I believe the set for
adding Octeon drivers to build is ok to merge, though there is a small
change for renaming machine_arg to machine_args in it if these patches
are not applied first. Will I take that set, if my recent rebase on top
of mainline has not broken it, and you can rebase these to take account
of that extra driver?

/Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM
  2018-01-22 14:09         ` Bruce Richardson
@ 2018-01-22 14:44           ` Pavan Nikhilesh
  0 siblings, 0 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 14:44 UTC (permalink / raw)
  To: Bruce Richardson, jerin.jacob, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev

On Mon, Jan 22, 2018 at 02:09:28PM +0000, Bruce Richardson wrote:
> On Mon, Jan 22, 2018 at 06:07:18PM +0530, Pavan Nikhilesh wrote:
> > On Mon, Jan 22, 2018 at 12:30:53PM +0000, Bruce Richardson wrote:
> > > On Mon, Jan 22, 2018 at 05:16:49PM +0530, Pavan Nikhilesh wrote:
> > > > Added support for detecting march and mcpu by reading midr_el1
> > > > register.  The implementer, primary part number values read can be
> > > > used to figure out the underlying arm cpu.
> > > >
> > > > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > > > --- app/test-pmd/meson.build    |  2 +-
> > > > config/arm/armv8_machine.py | 18 +++++++++ config/arm/meson.build
> > > > | 95 +++++++++++++++++++++++++++++++++++++++++----
> > > > config/meson.build          | 19 ++++----- drivers/meson.build
> > > > |  2 +- examples/meson.build        |  2 +- lib/meson.build
> > > > |  2 +- meson.build                 |  2 +- test/test/meson.build
> > > > |  2 +- 9 files changed, 121 insertions(+), 23 deletions(-) create
> > > > mode 100755 config/arm/armv8_machine.py
> > > >
> > <snip>
> > > > + +	if machine == 'generic' +		machine =
> > > > impl_generic +		cmd_output = cmd_generic +	endif +
> > > > +	message('Implementer : ' + machine[0])
> > >
> > > When cross-compiling for arm I get an error at this line:
> > >
> > >   Meson encountered an error in file config/arm/meson.build, line
> > >   69, column 1: Index 0 out of bounds of array of size 0.
> > >
> > Will be sending v2 of the cross patch soon(once directory structure
> > and file name is fininlized) that would resolve this issue.
> >
> So is there an expected patch ordering here? I believe the set for
> adding Octeon drivers to build is ok to merge, though there is a small
> change for renaming machine_arg to machine_args in it if these patches
> are not applied first. Will I take that set, if my recent rebase on top
> of mainline has not broken it, and you can rebase these to take account
> of that extra driver?

Now that the cross files naming and directory structure is agreed upon I will
merge the patches as a single set and send it fixing the machine_args part for
app/test-eventdev.

>
> /Bruce

Thanks,
Pavan.

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev]  [PATCH v6 1/4] build: add support for ARM builds
  2017-12-19 10:53 [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds Bruce Richardson
                   ` (4 preceding siblings ...)
  2018-01-22 11:46 ` [dpdk-dev] [PATCH v5 1/2] build: add support for ARM builds Pavan Nikhilesh
@ 2018-01-22 15:26 ` Pavan Nikhilesh
  2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 2/4] build: add support for detecting march on ARM Pavan Nikhilesh
                     ` (4 more replies)
  5 siblings, 5 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 15:26 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

From: Bruce Richardson <bruce.richardson@intel.com>

Add files to enable compiling for ARM native/cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.

        meson arm-build --cross-file aarch64_cross.txt
        ninja -C arm-build

where aarch64_cross.txt contained the following

        [binaries]
        c = 'aarch64-linux-gnu-gcc'
        cpp = 'aarch64-linux-gnu-cpp'
        ar = 'aarch64-linux-gnu-ar'

        [host_machine]
        system = 'linux'
        cpu_family = 'aarch64'
        cpu = 'armv8-a'
        endian = 'little'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---

 v6 Changes:
 - add documentation for cross compiling with meson
 - rebase onto master
 - fix commit logs

 v5 Changes:
 - Use generic_armv8 config when script returns unknows machine args

 v4 Changes:
 - use set_quoted to set config instead of explicitly using quotes.

 v3 Changes:
 - Fix missing SPDX license tags

 v2 Changes:
 - Merged RFC patch.
 - Added framework to easily other vendor specific flags
 - renamed machine_arg to machine_args

 config/arm/meson.build                             | 36 ++++++++++++++++++++++
 config/meson.build                                 |  4 ++-
 lib/librte_eal/common/arch/arm/meson.build         |  5 +++
 lib/librte_eal/common/include/arch/arm/meson.build | 29 +++++++++++++++++
 4 files changed, 73 insertions(+), 1 deletion(-)
 create mode 100644 config/arm/meson.build
 create mode 100644 lib/librte_eal/common/arch/arm/meson.build
 create mode 100644 lib/librte_eal/common/include/arch/arm/meson.build

diff --git a/config/arm/meson.build b/config/arm/meson.build
new file mode 100644
index 000000000..f05de4c2c
--- /dev/null
+++ b/config/arm/meson.build
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+# Copyright(c) 2017 Cavium, Inc
+
+# for checking defines we need to use the correct compiler flags
+march_opt = '-march=@0@'.format(machine)
+
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
+if cc.sizeof('void *') == 8
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
+	dpdk_conf.set('RTE_ARCH_ARM', 1)
+	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+endif
+
+if cc.get_define('__ARM_NEON', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
+endif
+
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
+	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA2', 1)
+	compile_time_cpuflags += ['RTE_CPUFLAG_AES', 'RTE_CPUFLAG_PMULL',
+	'RTE_CPUFLAG_SHA1', 'RTE_CPUFLAG_SHA2']
+endif
diff --git a/config/meson.build b/config/meson.build
index 95223042f..fa55c53a5 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -56,8 +56,10 @@ endforeach
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
-	subdir(arch_subdir)
+elif host_machine.cpu_family().startswith('arm') or host_machine.cpu_family().startswith('aarch')
+	arch_subdir = 'arm'
 endif
+subdir(arch_subdir)
 dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))

 # set the install path for the drivers
diff --git a/lib/librte_eal/common/arch/arm/meson.build b/lib/librte_eal/common/arch/arm/meson.build
new file mode 100644
index 000000000..c6bd92272
--- /dev/null
+++ b/lib/librte_eal/common/arch/arm/meson.build
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+eal_common_arch_sources = files('rte_cpuflags.c',
+	'rte_cycles.c')
diff --git a/lib/librte_eal/common/include/arch/arm/meson.build b/lib/librte_eal/common/include/arch/arm/meson.build
new file mode 100644
index 000000000..77893fa35
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm/meson.build
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation.
+
+install_headers(
+	'rte_atomic_32.h',
+	'rte_atomic_64.h',
+	'rte_atomic.h',
+	'rte_byteorder.h',
+	'rte_cpuflags_32.h',
+	'rte_cpuflags_64.h',
+	'rte_cpuflags.h',
+	'rte_cycles_32.h',
+	'rte_cycles_64.h',
+	'rte_cycles.h',
+	'rte_io_64.h',
+	'rte_io.h',
+	'rte_memcpy_32.h',
+	'rte_memcpy_64.h',
+	'rte_memcpy.h',
+	'rte_pause_32.h',
+	'rte_pause_64.h',
+	'rte_pause.h',
+	'rte_prefetch_32.h',
+	'rte_prefetch_64.h',
+	'rte_prefetch.h',
+	'rte_rwlock.h',
+	'rte_spinlock.h',
+	'rte_vect.h',
+	subdir: get_option('include_subdir_arch'))
--
2.16.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev] [PATCH v6 2/4] build: add support for detecting march on ARM
  2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
@ 2018-01-22 15:26   ` Pavan Nikhilesh
  2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 3/4] build: add support for vendor specific ARM cross builds Pavan Nikhilesh
                     ` (3 subsequent siblings)
  4 siblings, 0 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 15:26 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 app/test-eventdev/meson.build |  2 +-
 app/test-pmd/meson.build      |  2 +-
 config/arm/armv8_machine.py   | 18 ++++++++
 config/arm/meson.build        | 98 +++++++++++++++++++++++++++++++++++++++----
 config/meson.build            | 19 +++++----
 drivers/meson.build           |  2 +-
 examples/meson.build          |  2 +-
 lib/meson.build               |  2 +-
 meson.build                   |  2 +-
 test/test/meson.build         |  2 +-
 10 files changed, 125 insertions(+), 24 deletions(-)
 create mode 100755 config/arm/armv8_machine.py

diff --git a/app/test-eventdev/meson.build b/app/test-eventdev/meson.build
index 1dd954539..5beaa0070 100644
--- a/app/test-eventdev/meson.build
+++ b/app/test-eventdev/meson.build
@@ -21,7 +21,7 @@ endif
 
 executable('dpdk-test-eventdev',
 	sources,
-	c_args: machine_arg,
+	c_args: machine_args,
 	link_whole: link_libs,
 	dependencies: dep_objs,
 	install_rpath: join_paths(get_option('prefix'), driver_install_path),
diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
index e819677a5..2a3f0ba1f 100644
--- a/app/test-pmd/meson.build
+++ b/app/test-pmd/meson.build
@@ -45,7 +45,7 @@ endif
 
 executable('dpdk-testpmd',
 	sources,
-	c_args: machine_arg,
+	c_args: machine_args,
 	link_whole: link_libs,
 	dependencies: dep_objs,
 	install_rpath: join_paths(get_option('prefix'), driver_install_path),
diff --git a/config/arm/armv8_machine.py b/config/arm/armv8_machine.py
new file mode 100755
index 000000000..404866d2f
--- /dev/null
+++ b/config/arm/armv8_machine.py
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Cavium, Inc
+
+ident = []
+fname = '/sys/devices/system/cpu/cpu0/regs/identification/midr_el1'
+with open(fname) as f:
+    content = f.read()
+
+midr_el1 = (int(content.rstrip('\n'), 16))
+
+ident.append(hex((midr_el1 >> 24) & 0xFF))  # Implementer
+ident.append(hex((midr_el1 >> 20) & 0xF))   # Variant
+ident.append(hex((midr_el1 >> 16) & 0XF))   # Architecture
+ident.append(hex((midr_el1 >> 4) & 0xFFF))  # Primary Part number
+ident.append(hex(midr_el1 & 0xF))           # Revision
+
+print(' '.join(ident))
diff --git a/config/arm/meson.build b/config/arm/meson.build
index f05de4c2c..a5bfb9610 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -5,28 +5,110 @@
 # for checking defines we need to use the correct compiler flags
 march_opt = '-march=@0@'.format(machine)
 
-dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
-if cc.sizeof('void *') == 8
-	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
-	dpdk_conf.set('RTE_ARCH_ARM64', 1)
-	dpdk_conf.set('RTE_ARCH_64', 1)
+machine_args_generic = [
+	['default', ['-march=armv8-a+crc+crypto']]]
+machine_args_cavium = [
+	['default', ['-march=armv8-a+crc+crypto','-mcpu=thunderx']],
+	['0xa1', ['-mcpu=thunderxt88']],
+	['0xa2', ['-mcpu=thunderxt81']],
+	['0xa3', ['-mcpu=thunderxt83']]]
+
+flags_generic = [[]]
+flags_cavium = [
+	['RTE_MACHINE', '"thunderx"'],
+	['RTE_CACHE_LINE_SIZE', 128],
+	['RTE_MAX_NUMA_NODES', 2],
+	['RTE_MAX_LCORE', 96],
+	['RTE_MAX_VFIO_GROUPS', 128],
+	['RTE_RING_USE_C11_MEM_MODEL', false]]
+
+impl_generic = ['Generic armv8', flags_generic, machine_args_generic]
+impl_0x43 = ['Cavium', flags_cavium, machine_args_cavium]
+
+if cc.get_define('__clang__') != ''
+	dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'clang')
+	dpdk_conf.set('RTE_TOOLCHAIN_CLANG', 1)
 else
+	dpdk_conf.set_quoted('RTE_TOOLCHAIN', 'gcc')
+	dpdk_conf.set('RTE_TOOLCHAIN_GCC', 1)
+endif
+
+dpdk_conf.set('RTE_FORCE_INTRINSICS', 1)
+
+if cc.sizeof('void *') != 8
 	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
 	dpdk_conf.set('RTE_ARCH_ARM', 1)
 	dpdk_conf.set('RTE_ARCH_ARMv7', 1)
+else
+	dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
+	dpdk_conf.set('RTE_ARCH_ARM64', 1)
+	dpdk_conf.set('RTE_ARCH_64', 1)
+
+	machine = []
+	cmd_generic = ['generic', '', '', 'default', '']
+	cmd_output = cmd_generic # Set generic by default
+	machine_args = [] # Clear previous machine args
+	if not meson.is_cross_build()
+		# The script returns ['Implementer', 'Variant', 'Architecture',
+		# 'Primary Part number', 'Revision']
+		detect_vendor = find_program(join_paths(
+				meson.current_source_dir(), 'armv8_machine.py'))
+		cmd = run_command(detect_vendor.path())
+		if cmd.returncode() == 0
+			cmd_output = cmd.stdout().strip().split(' ')
+		endif
+		# Set to generic if variable is not found
+		machine = get_variable('impl_' + cmd_output[0], 'generic')
+	else
+		impl_id = meson.get_cross_property('implementor_id', 'generic')
+		machine = get_variable('impl_' + impl_id)
+	endif
+
+	if machine == 'generic'
+		machine = impl_generic
+		cmd_output = cmd_generic
+	endif
+
+	message('Implementer : ' + machine[0])
+	foreach flag: machine[1]
+		if flag.length() > 0
+			dpdk_conf.set(flag[0], flag[1])
+		endif
+	endforeach
+	# Primary part number based mcpu flags are supported
+	# for gcc versions > 7
+	if cc.version().version_compare(
+			'<7.0') or cmd_output.length() == 0
+		foreach marg: machine[2]
+			if marg[0] == 'default'
+				foreach f: marg[1]
+					machine_args += f
+				endforeach
+			endif
+		endforeach
+	else
+		foreach marg: machine[2]
+			if marg[0] == cmd_output[3]
+				foreach f: marg[1]
+					machine_args += f
+				endforeach
+			endif
+		endforeach
+	endif
 endif
+message(machine_args)
 
-if cc.get_define('__ARM_NEON', args: march_opt) != ''
+if cc.get_define('__ARM_NEON', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_NEON', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_NEON']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRC32', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRC32', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_CRC32', 1)
 	compile_time_cpuflags += ['RTE_CPUFLAG_CRC32']
 endif
 
-if cc.get_define('__ARM_FEATURE_CRYPTO', args: march_opt) != ''
+if cc.get_define('__ARM_FEATURE_CRYPTO', args: machine_args) != ''
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_AES', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_PMULL', 1)
 	dpdk_conf.set('RTE_MACHINE_CPUFLAG_SHA1', 1)
diff --git a/config/meson.build b/config/meson.build
index fa55c53a5..f8c67578d 100644
--- a/config/meson.build
+++ b/config/meson.build
@@ -8,7 +8,8 @@ else
 	machine = get_option('machine')
 endif
 dpdk_conf.set('RTE_MACHINE', machine)
-machine_arg = '-march=' + machine
+machine_args = []
+machine_args += '-march=' + machine
 
 # use pthreads
 add_project_link_arguments('-pthread', language: 'c')
@@ -53,6 +54,14 @@ foreach arg: warning_flags
 	endif
 endforeach
 
+# set other values pulled from the build options
+dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
+dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
+dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
+dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
+# values which have defaults which may be overridden
+dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
+
 compile_time_cpuflags = []
 if host_machine.cpu_family().startswith('x86')
 	arch_subdir = 'x86'
@@ -65,12 +74,4 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-# set other values pulled from the build options
-dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores'))
-dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
-dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
-dpdk_conf.set('RTE_EAL_ALLOW_INV_SOCKET_ID', get_option('allow_invalid_socket_id'))
-# values which have defaults which may be overridden
-dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
-
 install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
diff --git a/drivers/meson.build b/drivers/meson.build
index 26dfe72a2..604384f07 100644
--- a/drivers/meson.build
+++ b/drivers/meson.build
@@ -27,7 +27,7 @@ foreach class:driver_classes
 		version = 1
 		sources = []
 		objs = []
-		cflags = [machine_arg]
+		cflags = machine_args
 		includes = [include_directories(drv_path)]
 		# set up internal deps. Drivers can append/override as necessary
 		deps = std_deps
diff --git a/examples/meson.build b/examples/meson.build
index 0abed7169..b3f997242 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -9,7 +9,7 @@ endif
 foreach example: get_option('examples').split(',')
 	name = example
 	sources = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	ext_deps = []
 	includes = [include_directories(example)]
 	deps = ['eal', 'mempool', 'net', 'mbuf', 'ethdev', 'cmdline']
diff --git a/lib/meson.build b/lib/meson.build
index 6c062556e..7cdf3332a 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -32,7 +32,7 @@ foreach l:libraries
 	sources = []
 	headers = []
 	includes = []
-	cflags = [machine_arg]
+	cflags = machine_args
 	objs = [] # other object files to link against, used e.g. for
 	          # instruction-set optimized versions of code
 
diff --git a/meson.build b/meson.build
index e63144490..b41cc812e 100644
--- a/meson.build
+++ b/meson.build
@@ -66,5 +66,5 @@ pkg.generate(name: meson.project_name(),
 			['-Wl,-Bdynamic'] + dpdk_extra_ldflags,
 	description: 'The Data Plane Development Kit (DPDK)',
 	subdirs: [get_option('include_subdir_arch'), '.'],
-	extra_cflags: ['-include "rte_config.h"', machine_arg]
+	extra_cflags: ['-include "rte_config.h"'] + machine_args
 )
diff --git a/test/test/meson.build b/test/test/meson.build
index 2501b59d4..fb6079d86 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -202,7 +202,7 @@ if get_option('tests')
 		test_sources,
 		link_whole: link_libs,
 		dependencies: test_dep_objs,
-		c_args: machine_arg,
+		c_args: machine_args,
 		install_rpath: driver_install_path,
 		install: false)
 
-- 
2.16.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev] [PATCH v6 3/4] build: add support for vendor specific ARM cross builds
  2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
  2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 2/4] build: add support for detecting march on ARM Pavan Nikhilesh
@ 2018-01-22 15:26   ` Pavan Nikhilesh
  2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 4/4] doc: add instructions to cross compile using meson Pavan Nikhilesh
                     ` (2 subsequent siblings)
  4 siblings, 0 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 15:26 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

Add various vendor specific cross build targets.
This can be verified by using linaro toolchain and running

   meson build --cross-file config/arm/arm64_<cpu>_<platform>_<compiler>

In future more cross build targets can be added.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 config/arm/arm64_armv8_linuxapp_gcc    | 10 ++++++++++
 config/arm/arm64_thunderx_linuxapp_gcc | 13 +++++++++++++
 2 files changed, 23 insertions(+)
 create mode 100644 config/arm/arm64_armv8_linuxapp_gcc
 create mode 100644 config/arm/arm64_thunderx_linuxapp_gcc

diff --git a/config/arm/arm64_armv8_linuxapp_gcc b/config/arm/arm64_armv8_linuxapp_gcc
new file mode 100644
index 000000000..3b4d3c469
--- /dev/null
+++ b/config/arm/arm64_armv8_linuxapp_gcc
@@ -0,0 +1,10 @@
+[binaries]
+c = 'aarch64-linux-gnu-gcc'
+cpp = 'aarch64-linux-gnu-cpp'
+ar = 'aarch64-linux-gnu-gcc-ar'
+
+[host_machine]
+system = 'linux'
+cpu_family = 'aarch64'
+cpu = 'armv8-a'
+endian = 'little'
diff --git a/config/arm/arm64_thunderx_linuxapp_gcc b/config/arm/arm64_thunderx_linuxapp_gcc
new file mode 100644
index 000000000..7ff34af74
--- /dev/null
+++ b/config/arm/arm64_thunderx_linuxapp_gcc
@@ -0,0 +1,13 @@
+[binaries]
+c = 'aarch64-linux-gnu-gcc'
+cpp = 'aarch64-linux-gnu-cpp'
+ar = 'aarch64-linux-gnu-gcc-ar'
+
+[host_machine]
+system = 'linux'
+cpu_family = 'aarch64'
+cpu = 'armv8-a'
+endian = 'little'
+
+[properties]
+implementor_id = '0x43'
-- 
2.16.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [dpdk-dev] [PATCH v6 4/4] doc: add instructions to cross compile using meson
  2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
  2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 2/4] build: add support for detecting march on ARM Pavan Nikhilesh
  2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 3/4] build: add support for vendor specific ARM cross builds Pavan Nikhilesh
@ 2018-01-22 15:26   ` Pavan Nikhilesh
  2018-01-22 16:10   ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Bruce Richardson
  2018-01-22 16:20   ` Jerin Jacob
  4 siblings, 0 replies; 30+ messages in thread
From: Pavan Nikhilesh @ 2018-01-22 15:26 UTC (permalink / raw)
  To: jerin.jacob, bruce.richardson, harry.van.haaren, herbert.guan,
	hemant.agrawal
  Cc: dev, Pavan Nikhilesh

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 doc/build-sdk-meson.txt | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/doc/build-sdk-meson.txt b/doc/build-sdk-meson.txt
index b5573f7a7..9618e759e 100644
--- a/doc/build-sdk-meson.txt
+++ b/doc/build-sdk-meson.txt
@@ -150,6 +150,33 @@ driver install path, so dynamically-linked applications can be run without
 having to pass in ``-d /path/to/driver`` options for standard drivers.
 
 
+Cross Compiling DPDK
+--------------------
+
+To cross-compile DPDK on a desired target machine we can use the following
+command::
+
+	meson cross-build --cross-file <target_machine_configuration>
+
+For example if the target machine is arm64 we can use the following
+command::
+	meson arm-build --cross-file config/arm/arm64_armv8_linuxapp_gcc
+
+where config/arm/arm64_armv8_linuxapp_gcc contains the following
+parameters::
+
+	[binaries]
+	c = 'aarch64-linux-gnu-gcc'
+	cpp = 'aarch64-linux-gnu-cpp'
+	ar = 'aarch64-linux-gnu-ar'
+
+	[host_machine]
+	system = 'linux'
+	cpu_family = 'aarch64'
+	cpu = 'armv8-a'
+	endian = 'little'
+
+
 Using the DPDK within an Application
 -------------------------------------
 
-- 
2.16.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds
  2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
                     ` (2 preceding siblings ...)
  2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 4/4] doc: add instructions to cross compile using meson Pavan Nikhilesh
@ 2018-01-22 16:10   ` Bruce Richardson
  2018-01-22 16:20   ` Jerin Jacob
  4 siblings, 0 replies; 30+ messages in thread
From: Bruce Richardson @ 2018-01-22 16:10 UTC (permalink / raw)
  To: Pavan Nikhilesh
  Cc: jerin.jacob, harry.van.haaren, herbert.guan, hemant.agrawal, dev

On Mon, Jan 22, 2018 at 08:56:29PM +0530, Pavan Nikhilesh wrote:
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add files to enable compiling for ARM native/cross builds.
> This can be tested by doing a cross-compile for armv8-a type using
> the linaro gcc toolchain.
> 
>         meson arm-build --cross-file aarch64_cross.txt
>         ninja -C arm-build
> 
> where aarch64_cross.txt contained the following
> 
>         [binaries]
>         c = 'aarch64-linux-gnu-gcc'
>         cpp = 'aarch64-linux-gnu-cpp'
>         ar = 'aarch64-linux-gnu-ar'
> 
>         [host_machine]
>         system = 'linux'
>         cpu_family = 'aarch64'
>         cpu = 'armv8-a'
>         endian = 'little'
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> ---
Set LGTM. No issues in my cross-compilation testing.

I'd appreciate a final Ack from someone more familiar with ARM than me
before applying.

Thanks,
/Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds
  2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
                     ` (3 preceding siblings ...)
  2018-01-22 16:10   ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Bruce Richardson
@ 2018-01-22 16:20   ` Jerin Jacob
  2018-01-22 16:26     ` Bruce Richardson
  4 siblings, 1 reply; 30+ messages in thread
From: Jerin Jacob @ 2018-01-22 16:20 UTC (permalink / raw)
  To: Pavan Nikhilesh
  Cc: bruce.richardson, harry.van.haaren, herbert.guan, hemant.agrawal, dev

-----Original Message-----
> Date: Mon, 22 Jan 2018 20:56:29 +0530
> From: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> To: jerin.jacob@caviumnetworks.com, bruce.richardson@intel.com,
>  harry.van.haaren@intel.com, herbert.guan@arm.com, hemant.agrawal@nxp.com
> Cc: dev@dpdk.org, Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> Subject: [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds
> X-Mailer: git-send-email 2.14.1
> 
> From: Bruce Richardson <bruce.richardson@intel.com>
> 
> Add files to enable compiling for ARM native/cross builds.
> This can be tested by doing a cross-compile for armv8-a type using
> the linaro gcc toolchain.
> 
>         meson arm-build --cross-file aarch64_cross.txt
>         ninja -C arm-build
> 
> where aarch64_cross.txt contained the following
> 
>         [binaries]
>         c = 'aarch64-linux-gnu-gcc'
>         cpp = 'aarch64-linux-gnu-cpp'
>         ar = 'aarch64-linux-gnu-ar'
> 
>         [host_machine]
>         system = 'linux'
>         cpu_family = 'aarch64'
>         cpu = 'armv8-a'
>         endian = 'little'
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>

Series Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds
  2018-01-22 16:20   ` Jerin Jacob
@ 2018-01-22 16:26     ` Bruce Richardson
  0 siblings, 0 replies; 30+ messages in thread
From: Bruce Richardson @ 2018-01-22 16:26 UTC (permalink / raw)
  To: Jerin Jacob
  Cc: Pavan Nikhilesh, harry.van.haaren, herbert.guan, hemant.agrawal, dev

On Mon, Jan 22, 2018 at 09:50:04PM +0530, Jerin Jacob wrote:
> -----Original Message-----
> > Date: Mon, 22 Jan 2018 20:56:29 +0530
> > From: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > To: jerin.jacob@caviumnetworks.com, bruce.richardson@intel.com,
> >  harry.van.haaren@intel.com, herbert.guan@arm.com, hemant.agrawal@nxp.com
> > Cc: dev@dpdk.org, Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> > Subject: [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds
> > X-Mailer: git-send-email 2.14.1
> > 
> > From: Bruce Richardson <bruce.richardson@intel.com>
> > 
> > Add files to enable compiling for ARM native/cross builds.
> > This can be tested by doing a cross-compile for armv8-a type using
> > the linaro gcc toolchain.
> > 
> >         meson arm-build --cross-file aarch64_cross.txt
> >         ninja -C arm-build
> > 
> > where aarch64_cross.txt contained the following
> > 
> >         [binaries]
> >         c = 'aarch64-linux-gnu-gcc'
> >         cpp = 'aarch64-linux-gnu-cpp'
> >         ar = 'aarch64-linux-gnu-ar'
> > 
> >         [host_machine]
> >         system = 'linux'
> >         cpu_family = 'aarch64'
> >         cpu = 'armv8-a'
> >         endian = 'little'
> > 
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
> 
> Series Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> 
Applied to dpdk-next-build.

Thanks,
/Bruce

^ permalink raw reply	[flat|nested] 30+ messages in thread

end of thread, other threads:[~2018-01-22 16:26 UTC | newest]

Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-19 10:53 [dpdk-dev] [RFC PATCH] RFC build: prototype support for ARM builds Bruce Richardson
2017-12-19 13:27 ` Luca Boccassi
2017-12-19 14:17   ` Bruce Richardson
2018-01-19 13:05 ` [dpdk-dev] [PATCH v2 1/2] build: add " Pavan Nikhilesh
2018-01-19 13:05   ` [dpdk-dev] [PATCH v2 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
2018-01-19 13:52 ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Pavan Nikhilesh
2018-01-19 13:52   ` [dpdk-dev] [PATCH v3 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
2018-01-19 16:17     ` Bruce Richardson
2018-01-19 17:13       ` Pavan Nikhilesh
2018-01-19 17:30         ` Bruce Richardson
2018-01-19 16:24   ` [dpdk-dev] [PATCH v3 1/2] build: add support for ARM builds Bruce Richardson
2018-01-19 16:49     ` Hemant Agrawal
2018-01-19 17:33       ` Bruce Richardson
2018-01-19 18:23 ` [dpdk-dev] [PATCH v4 " Pavan Nikhilesh
2018-01-19 18:23   ` [dpdk-dev] [PATCH v4 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
2018-01-22  5:52     ` Herbert Guan
2018-01-22  7:16       ` Pavan Nikhilesh
2018-01-22 11:46 ` [dpdk-dev] [PATCH v5 1/2] build: add support for ARM builds Pavan Nikhilesh
2018-01-22 11:46   ` [dpdk-dev] [PATCH v5 2/2] build: add support for detecting march on ARM Pavan Nikhilesh
2018-01-22 12:30     ` Bruce Richardson
2018-01-22 12:37       ` Pavan Nikhilesh
2018-01-22 14:09         ` Bruce Richardson
2018-01-22 14:44           ` Pavan Nikhilesh
2018-01-22 15:26 ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Pavan Nikhilesh
2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 2/4] build: add support for detecting march on ARM Pavan Nikhilesh
2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 3/4] build: add support for vendor specific ARM cross builds Pavan Nikhilesh
2018-01-22 15:26   ` [dpdk-dev] [PATCH v6 4/4] doc: add instructions to cross compile using meson Pavan Nikhilesh
2018-01-22 16:10   ` [dpdk-dev] [PATCH v6 1/4] build: add support for ARM builds Bruce Richardson
2018-01-22 16:20   ` Jerin Jacob
2018-01-22 16:26     ` Bruce Richardson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).