[dpdk-dev] [PATCH v4 00/15] common ethdev linkstatus functions

[dpdk-dev] [PATCH v4 00/15] common ethdev linkstatus functions

[Stephen Hemminger]

While reviewing drivers, noticed a lot of unnecessary
duplication of code in drivers for handling the eth_dev link status
information. While consolidating this, it also became obvious that
some drivers behave differently for no good reason.

It also was a good chance to introduce atomic exchange primitives
in EAL because there are other places using cmpset where not
necessary (such as bonding).

Mostly only compile tested only, don't have all of the hardware
available (except ixgbe and virtio) to test.

Note: the eth_dev_link_update function return value is inconsistent
across drivers. Should be changed to be void.

v4
 - incorporate review feedback
 - rename _rte_linkstatus to rte_linkstatus
 - change return value of _rte_linkstatus
 - optimize get on 64bit platforms
 - change return value of rte_linkstatus_set

v3
 - align rte_linkstatus_get with rte_atomic64_read
 - virtio use ETH_SPEED_NUM_10G
 - add net/
v2
 - function names changed
 - rebased to current master

Stephen Hemminger (15):
  eal: introduce atomic exchange operation
  ethdev: add linkstatus get/set helper functions
  net/virtio: use eth_linkstatus_set
  net/vmxnet3: use rte_eth_linkstatus_set
  net/dpaa2: use rte_eth_linkstatus_set
  net/nfp: use rte_eth_linkstatus functions
  net/e1000: use rte_eth_linkstatus helpers
  net/ixgbe: use rte_eth_linkstatus functions
  net/sfc: use new rte_eth_linkstatus functions
  net/i40e: use rte_eth_linkstatus functions
  net/liquidio: use rte_eth_linkstatus_set
  net/thunderx: use rte_eth_linkstatus_set
  net/szedata: use _rte_eth_linkstatus_set
  net/octeontx: use rte_eth_linkstatus_set
  net/enic: use rte_eth_linkstatus_set

 drivers/net/dpaa2/dpaa2_ethdev.c                   | 75 ++---------------
 drivers/net/e1000/em_ethdev.c                      | 71 ++--------------
 drivers/net/e1000/igb_ethdev.c                     | 70 ++--------------
 drivers/net/enic/enic_ethdev.c                     |  5 +-
 drivers/net/enic/enic_main.c                       | 17 ++--
 drivers/net/i40e/i40e_ethdev.c                     | 43 ++--------
 drivers/net/i40e/i40e_ethdev_vf.c                  | 18 +---
 drivers/net/ixgbe/ixgbe_ethdev.c                   | 96 ++++------------------
 drivers/net/liquidio/lio_ethdev.c                  | 53 ++----------
 drivers/net/nfp/nfp_net.c                          | 77 ++---------------
 drivers/net/octeontx/octeontx_ethdev.c             | 17 +---
 drivers/net/sfc/sfc_ethdev.c                       | 21 +----
 drivers/net/sfc/sfc_ev.c                           | 20 +----
 drivers/net/szedata2/rte_eth_szedata2.c            | 19 ++---
 drivers/net/thunderx/nicvf_ethdev.c                | 18 +---
 drivers/net/virtio/virtio_ethdev.c                 | 67 +++------------
 drivers/net/vmxnet3/vmxnet3_ethdev.c               | 86 ++++---------------
 .../common/include/arch/x86/rte_atomic.h           | 24 ++++++
 .../common/include/arch/x86/rte_atomic_32.h        | 12 +++
 .../common/include/arch/x86/rte_atomic_64.h        | 12 +++
 lib/librte_eal/common/include/generic/rte_atomic.h | 78 ++++++++++++++++++
 lib/librte_ether/rte_ethdev.c                      | 22 +----
 lib/librte_ether/rte_ethdev.h                      | 62 ++++++++++++++
 23 files changed, 304 insertions(+), 679 deletions(-)

-- 
2.15.1

[dpdk-dev] [PATCH v4 01/15] eal: introduce atomic exchange operation

[Stephen Hemminger]

To handle atomic update of link status (64 bit), every driver
was doing its own version using cmpset.
Atomic exchange is a useful primitive in its own right;
therefore make it a EAL routine.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 .../common/include/arch/x86/rte_atomic.h           | 24 +++++++
 .../common/include/arch/x86/rte_atomic_32.h        | 12 ++++
 .../common/include/arch/x86/rte_atomic_64.h        | 12 ++++
 lib/librte_eal/common/include/generic/rte_atomic.h | 78 ++++++++++++++++++++++
 4 files changed, 126 insertions(+)

diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic.h b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
index 8469f97e193a..20d10cc18e4e 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
@@ -59,6 +59,18 @@ rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
 	return res;
 }
 
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgw %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline int rte_atomic16_test_and_set(rte_atomic16_t *v)
 {
 	return rte_atomic16_cmpset((volatile uint16_t *)&v->cnt, 0, 1);
@@ -133,6 +145,18 @@ rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
 	return res;
 }
 
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgl %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline int rte_atomic32_test_and_set(rte_atomic32_t *v)
 {
 	return rte_atomic32_cmpset((volatile uint32_t *)&v->cnt, 0, 1);
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h b/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
index fb3abf187998..43fa59355ac5 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
@@ -98,6 +98,18 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 	return res;
 }
 
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dest, uint64_t val)
+{
+	uint64_t old;
+
+	do {
+		old = *dest;
+	} while (rte_atomic64_t_cmpset(dest, old, val));
+
+	return old;
+}
+
 static inline void
 rte_atomic64_init(rte_atomic64_t *v)
 {
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
index 1a53a766bd72..fd2ec9c53796 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
@@ -71,6 +71,18 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 	return res;
 }
 
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgq %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline void
 rte_atomic64_init(rte_atomic64_t *v)
 {
diff --git a/lib/librte_eal/common/include/generic/rte_atomic.h b/lib/librte_eal/common/include/generic/rte_atomic.h
index 3ba7245a3e17..d3348343c1fb 100644
--- a/lib/librte_eal/common/include/generic/rte_atomic.h
+++ b/lib/librte_eal/common/include/generic/rte_atomic.h
@@ -139,6 +139,32 @@ rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val)
+{
+	return __atomic_exchange_2(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
@@ -392,6 +418,32 @@ rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val)
+{
+	return __atomic_exchange_4(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
@@ -644,6 +696,32 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val)
+{
+	return __atomic_exchange_4(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
-- 
2.15.1

[dpdk-dev] [PATCH v4 02/15] ethdev: add linkstatus get/set helper functions

[Stephen Hemminger]

Many drivers are all doing copy/paste of the same code to atomically
update the link status. Reduce duplication, and allow for future
changes by having common function for this.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_ether/rte_ethdev.c | 22 +++------------
 lib/librte_ether/rte_ethdev.h | 62 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+), 18 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index a524af740f4a..d6433af35a19 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1447,20 +1447,6 @@ rte_eth_allmulticast_get(uint16_t port_id)
 	return dev->data->all_multicast;
 }
 
-static inline int
-rte_eth_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 void
 rte_eth_link_get(uint16_t port_id, struct rte_eth_link *eth_link)
 {
@@ -1469,8 +1455,8 @@ rte_eth_link_get(uint16_t port_id, struct rte_eth_link *eth_link)
 	RTE_ETH_VALID_PORTID_OR_RET(port_id);
 	dev = &rte_eth_devices[port_id];
 
-	if (dev->data->dev_conf.intr_conf.lsc != 0)
-		rte_eth_dev_atomic_read_link_status(dev, eth_link);
+	if (dev->data->dev_conf.intr_conf.lsc)
+		rte_eth_linkstatus_get(dev, eth_link);
 	else {
 		RTE_FUNC_PTR_OR_RET(*dev->dev_ops->link_update);
 		(*dev->dev_ops->link_update)(dev, 1);
@@ -1486,8 +1472,8 @@ rte_eth_link_get_nowait(uint16_t port_id, struct rte_eth_link *eth_link)
 	RTE_ETH_VALID_PORTID_OR_RET(port_id);
 	dev = &rte_eth_devices[port_id];
 
-	if (dev->data->dev_conf.intr_conf.lsc != 0)
-		rte_eth_dev_atomic_read_link_status(dev, eth_link);
+	if (dev->data->dev_conf.intr_conf.lsc)
+		rte_eth_linkstatus_get(dev, eth_link);
 	else {
 		RTE_FUNC_PTR_OR_RET(*dev->dev_ops->link_update);
 		(*dev->dev_ops->link_update)(dev, 0);
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index b10e2a92da71..ec8255656967 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -2218,6 +2218,68 @@ int rte_eth_dev_set_link_down(uint16_t port_id);
  */
 void rte_eth_dev_close(uint16_t port_id);
 
+
+/**
+ * @internal
+ * Atomically set the link status for the specific device.
+ * It is for use by DPDK device driver use only.
+ * User applications should not call it
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ * @param link
+ *  New link status value.
+ * @return
+ *  1 if link status has changed;
+ *  0 if link status is unchanged.
+ */
+static inline int
+rte_eth_linkstatus_set(struct rte_eth_dev *dev,
+		       const struct rte_eth_link *new_link)
+{
+	volatile uint64_t *dev_link
+		 = (volatile uint64_t *)&(dev->data->dev_link);
+	union {
+		uint64_t val64;
+		struct rte_eth_link link;
+	} orig;
+
+	RTE_BUILD_BUG_ON(sizeof(*new_link) != sizeof(uint64_t));
+
+	orig.val64 = rte_atomic64_exchange(dev_link,
+					   *(const uint64_t *)new_link);
+
+	return orig.link.link_status != new_link->link_status;
+}
+
+/**
+ * @internal
+ * Atomically get the link speed and status.
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ * @param link
+ *  link status value.
+ */
+static inline void
+rte_eth_linkstatus_get(const struct rte_eth_dev *dev,
+		       struct rte_eth_link *link)
+{
+	volatile uint64_t *src = (uint64_t *)&(dev->data->dev_link);
+	uint64_t *dst = (uint64_t *)link;
+
+	RTE_BUILD_BUG_ON(sizeof(*link) != sizeof(uint64_t));
+
+	/* can't use rte_atomic64_read because it returns signed int */
+#ifdef __LP64__
+	*dst = *src;
+#else
+	do {
+		*dst = *src;
+	} while (!rte_atomic64_cmpset(src, *dst, *dst));
+#endif
+}
+
 /**
  * Reset a Ethernet device and keep its port id.
  *
-- 
2.15.1

[dpdk-dev] [PATCH v4 03/15] net/virtio: use eth_linkstatus_set

[Stephen Hemminger]

Use the new comon code in ethdev to handle link status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/virtio/virtio_ethdev.c | 67 ++++++++------------------------------
 1 file changed, 13 insertions(+), 54 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 21f2131a9efd..782fd8619116 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -14,7 +14,6 @@
 #include <rte_string_fns.h>
 #include <rte_memzone.h>
 #include <rte_malloc.h>
-#include <rte_atomic.h>
 #include <rte_branch_prediction.h>
 #include <rte_pci.h>
 #include <rte_bus_pci.h>
@@ -771,46 +770,6 @@ static const struct eth_dev_ops virtio_eth_dev_ops = {
 	.mac_addr_set            = virtio_mac_addr_set,
 };
 
-static inline int
-virtio_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-			*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-virtio_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-		struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 static void
 virtio_update_stats(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
 {
@@ -1913,8 +1872,10 @@ static void
 virtio_dev_stop(struct rte_eth_dev *dev)
 {
 	struct virtio_hw *hw = dev->data->dev_private;
-	struct rte_eth_link link;
 	struct rte_intr_conf *intr_conf = &dev->data->dev_conf.intr_conf;
+	struct rte_eth_link link = {
+		.link_status = ETH_LINK_DOWN,
+	};
 
 	PMD_INIT_LOG(DEBUG, "stop");
 
@@ -1922,21 +1883,19 @@ virtio_dev_stop(struct rte_eth_dev *dev)
 		virtio_intr_disable(dev);
 
 	hw->started = 0;
-	memset(&link, 0, sizeof(link));
-	virtio_dev_atomic_write_link_status(dev, &link);
+	rte_eth_linkstatus_set(dev, &link);
 }
 
 static int
 virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
 {
-	struct rte_eth_link link, old;
-	uint16_t status;
 	struct virtio_hw *hw = dev->data->dev_private;
-	memset(&link, 0, sizeof(link));
-	virtio_dev_atomic_read_link_status(dev, &link);
-	old = link;
-	link.link_duplex = ETH_LINK_FULL_DUPLEX;
-	link.link_speed  = SPEED_10G;
+	uint16_t status;
+	struct rte_eth_link link = {
+		.link_speed = ETH_SPEED_NUM_10G,
+		.link_duplex = ETH_LINK_FULL_DUPLEX,
+		.link_autoneg = ETH_LINK_SPEED_FIXED,
+	};
 
 	if (hw->started == 0) {
 		link.link_status = ETH_LINK_DOWN;
@@ -1957,9 +1916,9 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet
 	} else {
 		link.link_status = ETH_LINK_UP;
 	}
-	virtio_dev_atomic_write_link_status(dev, &link);
-
-	return (old.link_status == link.link_status) ? -1 : 0;
+	rte_eth_linkstatus_set(dev, &link);
+ 
+	return 0;
 }
 
 static int
-- 
2.15.1

[dpdk-dev] [PATCH v4 04/15] net/vmxnet3: use rte_eth_linkstatus_set

[Stephen Hemminger]

Use new rte_eth_link_update helper.
Also remove no longer necessary include of rte_atomic.h

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/vmxnet3/vmxnet3_ethdev.c | 86 +++++++-----------------------------
 1 file changed, 16 insertions(+), 70 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_ethdev.c b/drivers/net/vmxnet3/vmxnet3_ethdev.c
index c2f12cdf2a4d..761731a304e0 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethdev.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethdev.c
@@ -20,7 +20,6 @@
 #include <rte_debug.h>
 #include <rte_pci.h>
 #include <rte_bus_pci.h>
-#include <rte_atomic.h>
 #include <rte_branch_prediction.h>
 #include <rte_memory.h>
 #include <rte_memzone.h>
@@ -157,59 +156,6 @@ gpa_zone_reserve(struct rte_eth_dev *dev, uint32_t size,
 	return rte_memzone_reserve_aligned(z_name, size, socket_id, 0, align);
 }
 
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-
-static int
-vmxnet3_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				    struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to write to.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static int
-vmxnet3_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				     struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 /*
  * This function is based on vmxnet3_disable_intr()
  */
@@ -814,9 +760,13 @@ vmxnet3_dev_start(struct rte_eth_dev *dev)
 static void
 vmxnet3_dev_stop(struct rte_eth_dev *dev)
 {
-	struct rte_eth_link link;
 	struct vmxnet3_hw *hw = dev->data->dev_private;
-
+	struct rte_eth_link link = {
+		.link_speed = ETH_SPEED_NUM_10G,
+		.link_duplex = ETH_LINK_FULL_DUPLEX,
+		.link_autoneg = ETH_LINK_SPEED_FIXED,
+		.link_status = ETH_LINK_DOWN,
+	};
 	PMD_INIT_FUNC_TRACE();
 
 	if (hw->adapter_stopped == 1) {
@@ -849,8 +799,7 @@ vmxnet3_dev_stop(struct rte_eth_dev *dev)
 	vmxnet3_dev_clear_queues(dev);
 
 	/* Clear recorded link status */
-	memset(&link, 0, sizeof(link));
-	vmxnet3_dev_atomic_write_link_status(dev, &link);
+	rte_eth_linkstatus_set(dev, &link);
 }
 
 /*
@@ -1130,25 +1079,22 @@ __vmxnet3_dev_link_update(struct rte_eth_dev *dev,
 			  __rte_unused int wait_to_complete)
 {
 	struct vmxnet3_hw *hw = dev->data->dev_private;
-	struct rte_eth_link old = { 0 }, link;
+	struct rte_eth_link link = {
+		.link_speed = ETH_SPEED_NUM_10G,
+		.link_duplex = ETH_LINK_FULL_DUPLEX,
+		.link_autoneg = ETH_LINK_SPEED_FIXED,
+		.link_status = ETH_LINK_DOWN,
+	};
 	uint32_t ret;
 
-	memset(&link, 0, sizeof(link));
-	vmxnet3_dev_atomic_read_link_status(dev, &old);
-
 	VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK);
 	ret = VMXNET3_READ_BAR1_REG(hw, VMXNET3_REG_CMD);
 
-	if (ret & 0x1) {
+	if (ret & 0x1)
 		link.link_status = ETH_LINK_UP;
-		link.link_duplex = ETH_LINK_FULL_DUPLEX;
-		link.link_speed = ETH_SPEED_NUM_10G;
-		link.link_autoneg = ETH_LINK_SPEED_FIXED;
-	}
-
-	vmxnet3_dev_atomic_write_link_status(dev, &link);
 
-	return (old.link_status == link.link_status) ? -1 : 0;
+	rte_eth_linkstatus_set(dev, &link);
+	return 0;
 }
 
 static int
-- 
2.15.1

[dpdk-dev] [PATCH v4 05/15] net/dpaa2: use rte_eth_linkstatus_set

[Stephen Hemminger]

Use new helper function to update the link status.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/dpaa2/dpaa2_ethdev.c | 75 ++++------------------------------------
 1 file changed, 7 insertions(+), 68 deletions(-)

diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index 2f99d95d2216..c2aed380e408 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -56,58 +56,6 @@ static int dpaa2_dev_set_link_up(struct rte_eth_dev *dev);
 static int dpaa2_dev_set_link_down(struct rte_eth_dev *dev);
 static int dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-dpaa2_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				  struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &dev->data->dev_link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-dpaa2_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				   struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &dev->data->dev_link;
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 static int
 dpaa2_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 {
@@ -804,7 +752,7 @@ dpaa2_dev_stop(struct rte_eth_dev *dev)
 
 	/* clear the recorded link status */
 	memset(&link, 0, sizeof(link));
-	dpaa2_dev_atomic_write_link_status(dev, &link);
+	_rte_eth_link_write(dev, &link);
 }
 
 static void
@@ -836,7 +784,7 @@ dpaa2_dev_close(struct rte_eth_dev *dev)
 	}
 
 	memset(&link, 0, sizeof(link));
-	dpaa2_dev_atomic_write_link_status(dev, &link);
+	_rte_eth_link_write(dev, &link);
 }
 
 static void
@@ -1284,15 +1232,13 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 	int ret;
 	struct dpaa2_dev_priv *priv = dev->data->dev_private;
 	struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
-	struct rte_eth_link link, old;
+	struct rte_eth_link link;
 	struct dpni_link_state state = {0};
 
 	if (dpni == NULL) {
 		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return 0;
 	}
-	memset(&old, 0, sizeof(old));
-	dpaa2_dev_atomic_read_link_status(dev, &old);
 
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret < 0) {
@@ -1300,11 +1246,6 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 		return -1;
 	}
 
-	if ((old.link_status == state.up) && (old.link_speed == state.rate)) {
-		RTE_LOG(DEBUG, PMD, "No change in status\n");
-		return -1;
-	}
-
 	memset(&link, 0, sizeof(struct rte_eth_link));
 	link.link_status = state.up;
 	link.link_speed = state.rate;
@@ -1314,12 +1255,10 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 	else
 		link.link_duplex = ETH_LINK_FULL_DUPLEX;
 
-	dpaa2_dev_atomic_write_link_status(dev, &link);
-
-	if (link.link_status)
-		PMD_DRV_LOG(INFO, "Port %d Link is Up\n", dev->data->port_id);
-	else
-		PMD_DRV_LOG(INFO, "Port %d Link is Down", dev->data->port_id);
+	if (rte_eth_linkstatus_set(dev, &link)) {
+		PMD_DRV_LOG(INFO, "Port %d Link is %s\n", dev->data->port_id,
+			    link.link_status ? "Up" : "Down");
+	}
 	return 0;
 }
 
-- 
2.15.1

[dpdk-dev] [PATCH v4 06/15] net/nfp: use rte_eth_linkstatus functions

[Stephen Hemminger]

Use new rte_eth_linkstatus_get/set helper function.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/nfp/nfp_net.c | 77 +++++------------------------------------------
 1 file changed, 7 insertions(+), 70 deletions(-)

diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 0501156bacb7..80a676dacf60 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -204,57 +204,6 @@ nn_cfg_writeq(struct nfp_net_hw *hw, int off, uint64_t val)
 	nn_writeq(rte_cpu_to_le_64(val), hw->ctrl_bar + off);
 }
 
-/*
- * Atomically reads link status information from global structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-nfp_net_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				    struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &dev->data->dev_link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/*
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-nfp_net_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				     struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &dev->data->dev_link;
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 static void
 nfp_net_rx_queue_release_mbufs(struct nfp_net_rxq *rxq)
 {
@@ -977,7 +926,7 @@ static int
 nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
 {
 	struct nfp_net_hw *hw;
-	struct rte_eth_link link, old;
+	struct rte_eth_link link;
 	uint32_t nn_link_status;
 
 	static const uint32_t ls_to_ethtool[] = {
@@ -995,9 +944,6 @@ nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
 
 	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
-	memset(&old, 0, sizeof(old));
-	nfp_net_dev_atomic_read_link_status(dev, &old);
-
 	nn_link_status = nn_cfg_readl(hw, NFP_NET_CFG_STS);
 
 	memset(&link, 0, sizeof(struct rte_eth_link));
@@ -1015,16 +961,10 @@ nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
 	else
 		link.link_speed = ls_to_ethtool[nn_link_status];
 
-	if (old.link_status != link.link_status) {
-		nfp_net_dev_atomic_write_link_status(dev, &link);
-		if (link.link_status)
-			PMD_DRV_LOG(INFO, "NIC Link is Up\n");
-		else
-			PMD_DRV_LOG(INFO, "NIC Link is Down\n");
-		return 0;
-	}
-
-	return -1;
+	if (rte_eth_linkstatus_set(dev, &link))
+		PMD_DRV_LOG(INFO, "NIC Link is %s\n",
+			    link.link_status ? "Up" : "Down");
+	return 0;
 }
 
 static int
@@ -1354,8 +1294,7 @@ nfp_net_dev_link_status_print(struct rte_eth_dev *dev)
 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
 	struct rte_eth_link link;
 
-	memset(&link, 0, sizeof(link));
-	nfp_net_dev_atomic_read_link_status(dev, &link);
+	rte_eth_linkstatus_get(dev, &link);
 	if (link.link_status)
 		RTE_LOG(INFO, PMD, "Port %d: Link Up - speed %u Mbps - %s\n",
 			dev->data->port_id, link.link_speed,
@@ -1408,9 +1347,7 @@ nfp_net_dev_interrupt_handler(void *param)
 
 	PMD_DRV_LOG(DEBUG, "We got a LSC interrupt!!!\n");
 
-	/* get the link status */
-	memset(&link, 0, sizeof(link));
-	nfp_net_dev_atomic_read_link_status(dev, &link);
+	rte_eth_linkstatus_get(dev, &link);
 
 	nfp_net_link_update(dev, 0);
 
-- 
2.15.1

[dpdk-dev] [PATCH v4 07/15] net/e1000: use rte_eth_linkstatus helpers

[Stephen Hemminger]

Use new rte_eth_linkstatus_get/set API.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/e1000/em_ethdev.c  | 71 ++++--------------------------------------
 drivers/net/e1000/igb_ethdev.c | 70 +++--------------------------------------
 2 files changed, 11 insertions(+), 130 deletions(-)

diff --git a/drivers/net/e1000/em_ethdev.c b/drivers/net/e1000/em_ethdev.c
index f457be55e706..1c30e8289b61 100644
--- a/drivers/net/e1000/em_ethdev.c
+++ b/drivers/net/e1000/em_ethdev.c
@@ -20,7 +20,6 @@
 #include <rte_ethdev_pci.h>
 #include <rte_memory.h>
 #include <rte_eal.h>
-#include <rte_atomic.h>
 #include <rte_malloc.h>
 #include <rte_dev.h>
 
@@ -193,57 +192,6 @@ static const struct eth_dev_ops eth_em_ops = {
 	.txq_info_get         = em_txq_info_get,
 };
 
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_em_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_em_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
 
 /**
  *  eth_em_dev_is_ich8 - Check for ICH8 device
@@ -769,7 +717,7 @@ eth_em_stop(struct rte_eth_dev *dev)
 
 	/* clear the recorded link status */
 	memset(&link, 0, sizeof(link));
-	rte_em_dev_atomic_write_link_status(dev, &link);
+	rte_eth_linkstatus_set(dev, &link);
 
 	if (!rte_intr_allow_others(intr_handle))
 		/* resume to the default handler */
@@ -1127,7 +1075,7 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 {
 	struct e1000_hw *hw =
 		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_eth_link link, old;
+	struct rte_eth_link link;
 	int link_check, count;
 
 	link_check = 0;
@@ -1162,8 +1110,6 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 		rte_delay_ms(EM_LINK_UPDATE_CHECK_INTERVAL);
 	}
 	memset(&link, 0, sizeof(link));
-	rte_em_dev_atomic_read_link_status(dev, &link);
-	old = link;
 
 	/* Now we check if a transition has happened */
 	if (link_check && (link.link_status == ETH_LINK_DOWN)) {
@@ -1182,13 +1128,8 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 		link.link_status = ETH_LINK_DOWN;
 		link.link_autoneg = ETH_LINK_SPEED_FIXED;
 	}
-	rte_em_dev_atomic_write_link_status(dev, &link);
-
-	/* not changed */
-	if (old.link_status == link.link_status)
-		return -1;
-
-	/* changed */
+	rte_eth_linkstatus_set(dev, &link);
+	
 	return 0;
 }
 
@@ -1599,8 +1540,8 @@ eth_em_interrupt_action(struct rte_eth_dev *dev,
 	if (ret < 0)
 		return 0;
 
-	memset(&link, 0, sizeof(link));
-	rte_em_dev_atomic_read_link_status(dev, &link);
+	rte_eth_linkstatus_get(dev, &link);
+
 	if (link.link_status) {
 		PMD_INIT_LOG(INFO, " Port %d: Link Up - speed %u Mbps - %s",
 			     dev->data->port_id, link.link_speed,
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index 1333b62c3378..04ac6e53cda2 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -20,7 +20,6 @@
 #include <rte_ethdev_pci.h>
 #include <rte_memory.h>
 #include <rte_eal.h>
-#include <rte_atomic.h>
 #include <rte_malloc.h>
 #include <rte_dev.h>
 
@@ -522,57 +521,6 @@ static const struct rte_igb_xstats_name_off rte_igbvf_stats_strings[] = {
 #define IGBVF_NB_XSTATS (sizeof(rte_igbvf_stats_strings) / \
 		sizeof(rte_igbvf_stats_strings[0]))
 
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_igb_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_igb_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
 
 static inline void
 igb_intr_enable(struct rte_eth_dev *dev)
@@ -1524,7 +1472,7 @@ eth_igb_stop(struct rte_eth_dev *dev)
 
 	/* clear the recorded link status */
 	memset(&link, 0, sizeof(link));
-	rte_igb_dev_atomic_write_link_status(dev, &link);
+	rte_eth_linkstatus_set(dev, &link);
 
 	if (!rte_intr_allow_others(intr_handle))
 		/* resume to the default handler */
@@ -1600,7 +1548,7 @@ eth_igb_close(struct rte_eth_dev *dev)
 	}
 
 	memset(&link, 0, sizeof(link));
-	rte_igb_dev_atomic_write_link_status(dev, &link);
+	rte_eth_linkstatus_set(dev, &link);
 }
 
 static int
@@ -2347,7 +2295,7 @@ eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 {
 	struct e1000_hw *hw =
 		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_eth_link link, old;
+	struct rte_eth_link link;
 	int link_check, count;
 
 	link_check = 0;
@@ -2388,8 +2336,6 @@ eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 		rte_delay_ms(IGB_LINK_UPDATE_CHECK_INTERVAL);
 	}
 	memset(&link, 0, sizeof(link));
-	rte_igb_dev_atomic_read_link_status(dev, &link);
-	old = link;
 
 	/* Now we check if a transition has happened */
 	if (link_check) {
@@ -2408,13 +2354,8 @@ eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 		link.link_status = ETH_LINK_DOWN;
 		link.link_autoneg = ETH_LINK_SPEED_FIXED;
 	}
-	rte_igb_dev_atomic_write_link_status(dev, &link);
-
-	/* not changed */
-	if (old.link_status == link.link_status)
-		return -1;
+	rte_eth_linkstatus_set(dev, &link);
 
-	/* changed */
 	return 0;
 }
 
@@ -2853,8 +2794,7 @@ eth_igb_interrupt_action(struct rte_eth_dev *dev,
 		if (ret < 0)
 			return 0;
 
-		memset(&link, 0, sizeof(link));
-		rte_igb_dev_atomic_read_link_status(dev, &link);
+		rte_eth_linkstatus_get(dev, &link);
 		if (link.link_status) {
 			PMD_INIT_LOG(INFO,
 				     " Port %d: Link Up - speed %u Mbps - %s",
-- 
2.15.1

[dpdk-dev] [PATCH v4 08/15] net/ixgbe: use rte_eth_linkstatus functions

[Stephen Hemminger]

Use the new helper functions from eth_dev for
handling atomic link_info update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 96 +++++++---------------------------------
 1 file changed, 17 insertions(+), 79 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 43e0132f81fe..5bfb64c0e6dd 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -20,7 +20,6 @@
 #include <rte_debug.h>
 #include <rte_pci.h>
 #include <rte_bus_pci.h>
-#include <rte_atomic.h>
 #include <rte_branch_prediction.h>
 #include <rte_memory.h>
 #include <rte_eal.h>
@@ -781,58 +780,6 @@ static const struct rte_ixgbe_xstats_name_off rte_ixgbevf_stats_strings[] = {
 #define IXGBEVF_NB_XSTATS (sizeof(rte_ixgbevf_stats_strings) /	\
 		sizeof(rte_ixgbevf_stats_strings[0]))
 
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_ixgbe_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 /*
  * This function is the same as ixgbe_is_sfp() in base/ixgbe.h.
  */
@@ -2753,7 +2700,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
 
 	/* Clear recorded link status */
 	memset(&link, 0, sizeof(link));
-	rte_ixgbe_dev_atomic_write_link_status(dev, &link);
+	rte_eth_linkstatus_set(dev, &link);
 
 	if (!rte_intr_allow_others(intr_handle))
 		/* resume to the default handler */
@@ -3938,7 +3885,6 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 			    int wait_to_complete, int vf)
 {
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_eth_link link, old;
 	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
 	struct ixgbe_interrupt *intr =
 		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
@@ -3947,13 +3893,11 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 	u32 speed = 0;
 	int wait = 1;
 	bool autoneg = false;
-
-	link.link_status = ETH_LINK_DOWN;
-	link.link_speed = 0;
-	link.link_duplex = ETH_LINK_HALF_DUPLEX;
-	link.link_autoneg = ETH_LINK_AUTONEG;
-	memset(&old, 0, sizeof(old));
-	rte_ixgbe_dev_atomic_read_link_status(dev, &old);
+	struct rte_eth_link link = {
+		.link_status = ETH_LINK_DOWN,
+		.link_duplex = ETH_LINK_HALF_DUPLEX,
+		.link_autoneg = ETH_LINK_AUTONEG,
+	};
 
 	hw->mac.get_link_status = true;
 
@@ -3977,19 +3921,17 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 	if (diag != 0) {
 		link.link_speed = ETH_SPEED_NUM_100M;
 		link.link_duplex = ETH_LINK_FULL_DUPLEX;
-		rte_ixgbe_dev_atomic_write_link_status(dev, &link);
-		if (link.link_status == old.link_status)
-			return -1;
+		rte_eth_linkstatus_set(dev, &link);
+ 
 		return 0;
 	}
 
 	if (link_up == 0) {
-		rte_ixgbe_dev_atomic_write_link_status(dev, &link);
 		intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
-		if (link.link_status == old.link_status)
-			return -1;
+		rte_eth_linkstatus_set(dev, &link);
 		return 0;
 	}
+
 	intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
 	link.link_status = ETH_LINK_UP;
 	link.link_duplex = ETH_LINK_FULL_DUPLEX;
@@ -4021,11 +3963,8 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 		link.link_speed = ETH_SPEED_NUM_10G;
 		break;
 	}
-	rte_ixgbe_dev_atomic_write_link_status(dev, &link);
-
-	if (link.link_status == old.link_status)
-		return -1;
 
+	rte_eth_linkstatus_set(dev, &link);
 	return 0;
 }
 
@@ -4225,8 +4164,8 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
 	struct rte_eth_link link;
 
-	memset(&link, 0, sizeof(link));
-	rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+	rte_eth_linkstatus_get(dev, &link);
+
 	if (link.link_status) {
 		PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
 					(int)(dev->data->port_id),
@@ -4261,7 +4200,6 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev,
 	struct ixgbe_interrupt *intr =
 		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
 	int64_t timeout;
-	struct rte_eth_link link;
 	struct ixgbe_hw *hw =
 		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
@@ -4278,9 +4216,10 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev,
 	}
 
 	if (intr->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
+		struct rte_eth_link link;
+
 		/* get the link status before link update, for predicting later */
-		memset(&link, 0, sizeof(link));
-		rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+		rte_eth_linkstatus_get(dev, &link);
 
 		ixgbe_dev_link_update(dev, 0);
 
@@ -6799,9 +6738,8 @@ ixgbe_start_timecounters(struct rte_eth_dev *dev)
 	uint32_t shift = 0;
 
 	/* Get current link speed. */
-	memset(&link, 0, sizeof(link));
 	ixgbe_dev_link_update(dev, 1);
-	rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+	rte_eth_linkstatus_get(dev, &link);
 
 	switch (link.link_speed) {
 	case ETH_SPEED_NUM_100M:
-- 
2.15.1

[dpdk-dev] [PATCH v4 09/15] net/sfc: use new rte_eth_linkstatus functions

[Stephen Hemminger]

Use the new API (_rte_eth_linkstatus_set) to handle link status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/sfc/sfc_ethdev.c | 21 +++------------------
 drivers/net/sfc/sfc_ev.c     | 20 ++------------------
 2 files changed, 5 insertions(+), 36 deletions(-)

diff --git a/drivers/net/sfc/sfc_ethdev.c b/drivers/net/sfc/sfc_ethdev.c
index 2f5f86f84877..7b16c51c578c 100644
--- a/drivers/net/sfc/sfc_ethdev.c
+++ b/drivers/net/sfc/sfc_ethdev.c
@@ -238,22 +238,12 @@ static int
 sfc_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 {
 	struct sfc_adapter *sa = dev->data->dev_private;
-	struct rte_eth_link *dev_link = &dev->data->dev_link;
-	struct rte_eth_link old_link;
 	struct rte_eth_link current_link;
 
 	sfc_log_init(sa, "entry");
 
-retry:
-	EFX_STATIC_ASSERT(sizeof(*dev_link) == sizeof(rte_atomic64_t));
-	*(int64_t *)&old_link = rte_atomic64_read((rte_atomic64_t *)dev_link);
-
 	if (sa->state != SFC_ADAPTER_STARTED) {
 		sfc_port_link_mode_to_info(EFX_LINK_UNKNOWN, &current_link);
-		if (!rte_atomic64_cmpset((volatile uint64_t *)dev_link,
-					 *(uint64_t *)&old_link,
-					 *(uint64_t *)&current_link))
-			goto retry;
 	} else if (wait_to_complete) {
 		efx_link_mode_t link_mode;
 
@@ -261,21 +251,16 @@ sfc_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 			link_mode = EFX_LINK_UNKNOWN;
 		sfc_port_link_mode_to_info(link_mode, &current_link);
 
-		if (!rte_atomic64_cmpset((volatile uint64_t *)dev_link,
-					 *(uint64_t *)&old_link,
-					 *(uint64_t *)&current_link))
-			goto retry;
 	} else {
 		sfc_ev_mgmt_qpoll(sa);
-		*(int64_t *)&current_link =
-			rte_atomic64_read((rte_atomic64_t *)dev_link);
+		rte_eth_linkstatus_get(dev, &current_link);
 	}
 
-	if (old_link.link_status != current_link.link_status)
+	if (rte_eth_linkstatus_set(dev, &current_link))
 		sfc_info(sa, "Link status is %s",
 			 current_link.link_status ? "UP" : "DOWN");
 
-	return old_link.link_status == current_link.link_status ? 0 : -1;
+	return 0;
 }
 
 static void
diff --git a/drivers/net/sfc/sfc_ev.c b/drivers/net/sfc/sfc_ev.c
index a16dc27b380e..80c249f7526c 100644
--- a/drivers/net/sfc/sfc_ev.c
+++ b/drivers/net/sfc/sfc_ev.c
@@ -404,27 +404,11 @@ sfc_ev_link_change(void *arg, efx_link_mode_t link_mode)
 {
 	struct sfc_evq *evq = arg;
 	struct sfc_adapter *sa = evq->sa;
-	struct rte_eth_link *dev_link = &sa->eth_dev->data->dev_link;
 	struct rte_eth_link new_link;
-	uint64_t new_link_u64;
-	uint64_t old_link_u64;
-
-	EFX_STATIC_ASSERT(sizeof(*dev_link) == sizeof(rte_atomic64_t));
 
 	sfc_port_link_mode_to_info(link_mode, &new_link);
-
-	new_link_u64 = *(uint64_t *)&new_link;
-	do {
-		old_link_u64 = rte_atomic64_read((rte_atomic64_t *)dev_link);
-		if (old_link_u64 == new_link_u64)
-			break;
-
-		if (rte_atomic64_cmpset((volatile uint64_t *)dev_link,
-					old_link_u64, new_link_u64)) {
-			evq->sa->port.lsc_seq++;
-			break;
-		}
-	} while (B_TRUE);
+	if (rte_eth_linkstatus_set(sa->eth_dev, &new_link))
+		evq->sa->port.lsc_seq++;
 
 	return B_FALSE;
 }
-- 
2.15.1

[dpdk-dev] [PATCH v4 10/15] net/i40e: use rte_eth_linkstatus functions

[Stephen Hemminger]

Use new rte_linkstatus update API

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/i40e/i40e_ethdev.c    | 43 +++++----------------------------------
 drivers/net/i40e/i40e_ethdev_vf.c | 18 ++--------------
 2 files changed, 7 insertions(+), 54 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index fc386154f0b9..517918624658 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -627,34 +627,6 @@ static struct rte_pci_driver rte_i40e_pmd = {
 	.remove = eth_i40e_pci_remove,
 };
 
-static inline int
-rte_i40e_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				     struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-static inline int
-rte_i40e_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				      struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 RTE_PMD_REGISTER_PCI(net_i40e, rte_i40e_pmd);
 RTE_PMD_REGISTER_PCI_TABLE(net_i40e, pci_id_i40e_map);
 RTE_PMD_REGISTER_KMOD_DEP(net_i40e, "* igb_uio | uio_pci_generic | vfio-pci");
@@ -2327,17 +2299,16 @@ i40e_dev_link_update(struct rte_eth_dev *dev,
 #define MAX_REPEAT_TIME 10  /* 1s (10 * 100ms) in total */
 	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	struct i40e_link_status link_status;
-	struct rte_eth_link link, old;
+	struct rte_eth_link link;
 	int status;
 	unsigned rep_cnt = MAX_REPEAT_TIME;
 	bool enable_lse = dev->data->dev_conf.intr_conf.lsc ? true : false;
 
 	memset(&link, 0, sizeof(link));
-	memset(&old, 0, sizeof(old));
-	memset(&link_status, 0, sizeof(link_status));
-	rte_i40e_dev_atomic_read_link_status(dev, &old);
 
 	do {
+		memset(&link_status, 0, sizeof(link_status));
+
 		/* Get link status information from hardware */
 		status = i40e_aq_get_link_info(hw, enable_lse,
 						&link_status, NULL);
@@ -2390,10 +2361,7 @@ i40e_dev_link_update(struct rte_eth_dev *dev,
 			ETH_LINK_SPEED_FIXED);
 
 out:
-	rte_i40e_dev_atomic_write_link_status(dev, &link);
-	if (link.link_status == old.link_status)
-		return -1;
-
+	rte_eth_linkstatus_set(dev, &link);
 	i40e_notify_all_vfs_link_status(dev);
 
 	return 0;
@@ -9854,9 +9822,8 @@ i40e_start_timecounters(struct rte_eth_dev *dev)
 	uint32_t tsync_inc_h;
 
 	/* Get current link speed. */
-	memset(&link, 0, sizeof(link));
 	i40e_dev_link_update(dev, 1);
-	rte_i40e_dev_atomic_read_link_status(dev, &link);
+	rte_eth_linkstatus_get(dev, &link);
 
 	switch (link.link_speed) {
 	case ETH_SPEED_NUM_40G:
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index b96d77a0caed..0605fc107240 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -1034,20 +1034,6 @@ static const struct rte_pci_id pci_id_i40evf_map[] = {
 	{ .vendor_id = 0, /* sentinel */ },
 };
 
-static inline int
-i40evf_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				    struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 /* Disable IRQ0 */
 static inline void
 i40evf_disable_irq0(struct i40e_hw *hw)
@@ -2069,6 +2055,7 @@ i40evf_dev_link_update(struct rte_eth_dev *dev,
 	 * while Linux driver does not
 	 */
 
+	memset(&new_link, 0, sizeof(new_link));
 	/* Linux driver PF host */
 	switch (vf->link_speed) {
 	case I40E_LINK_SPEED_100MB:
@@ -2100,8 +2087,7 @@ i40evf_dev_link_update(struct rte_eth_dev *dev,
 	new_link.link_autoneg =
 		dev->data->dev_conf.link_speeds & ETH_LINK_SPEED_FIXED;
 
-	i40evf_dev_atomic_write_link_status(dev, &new_link);
-
+	rte_eth_linkstatus_set(dev, &new_link);
 	return 0;
 }
 
-- 
2.15.1

[dpdk-dev] [PATCH v4 11/15] net/liquidio: use rte_eth_linkstatus_set

[Stephen Hemminger]

Use the new link update API, and cleanup the logic in the the
link update routine.

Tested-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/liquidio/lio_ethdev.c | 53 ++++++---------------------------------
 1 file changed, 8 insertions(+), 45 deletions(-)

diff --git a/drivers/net/liquidio/lio_ethdev.c b/drivers/net/liquidio/lio_ethdev.c
index 5b50c9334103..cdb21a896f6c 100644
--- a/drivers/net/liquidio/lio_ethdev.c
+++ b/drivers/net/liquidio/lio_ethdev.c
@@ -901,32 +901,6 @@ lio_dev_vlan_filter_set(struct rte_eth_dev *eth_dev, uint16_t vlan_id, int on)
 	return 0;
 }
 
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param eth_dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-lio_dev_atomic_write_link_status(struct rte_eth_dev *eth_dev,
-				 struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &eth_dev->data->dev_link;
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 static uint64_t
 lio_hweight64(uint64_t w)
 {
@@ -946,23 +920,17 @@ lio_dev_link_update(struct rte_eth_dev *eth_dev,
 		    int wait_to_complete __rte_unused)
 {
 	struct lio_device *lio_dev = LIO_DEV(eth_dev);
-	struct rte_eth_link link, old;
-
-	/* Initialize */
-	link.link_status = ETH_LINK_DOWN;
-	link.link_speed = ETH_SPEED_NUM_NONE;
-	link.link_duplex = ETH_LINK_HALF_DUPLEX;
-	link.link_autoneg = ETH_LINK_AUTONEG;
-	memset(&old, 0, sizeof(old));
+	struct rte_eth_link link = {
+		.link_status = ETH_LINK_DOWN,
+		.link_speed = ETH_SPEED_NUM_NONE,
+		.link_duplex = ETH_LINK_HALF_DUPLEX,
+		.link_autoneg = ETH_LINK_AUTONEG,
+	};
 
 	/* Return what we found */
 	if (lio_dev->linfo.link.s.link_up == 0) {
 		/* Interface is down */
-		if (lio_dev_atomic_write_link_status(eth_dev, &link))
-			return -1;
-		if (link.link_status == old.link_status)
-			return -1;
-		return 0;
+		return rte_eth_linkstatus_set(eth_dev, &link);
 	}
 
 	link.link_status = ETH_LINK_UP; /* Interface is up */
@@ -979,12 +947,7 @@ lio_dev_link_update(struct rte_eth_dev *eth_dev,
 		link.link_duplex = ETH_LINK_HALF_DUPLEX;
 	}
 
-	if (lio_dev_atomic_write_link_status(eth_dev, &link))
-		return -1;
-
-	if (link.link_status == old.link_status)
-		return -1;
-
+	rte_eth_linkstatus_set(eth_dev, &link);
 	return 0;
 }
 
-- 
2.15.1

[dpdk-dev] [PATCH v4 12/15] net/thunderx: use rte_eth_linkstatus_set

[Stephen Hemminger]

Use new helper function.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/thunderx/nicvf_ethdev.c | 18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)

diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index 72dc8ae24ba9..94a2a9b7683d 100644
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c
@@ -15,7 +15,6 @@
 #include <sys/queue.h>
 
 #include <rte_alarm.h>
-#include <rte_atomic.h>
 #include <rte_branch_prediction.h>
 #include <rte_byteorder.h>
 #include <rte_common.h>
@@ -48,19 +47,6 @@ static void nicvf_dev_stop_cleanup(struct rte_eth_dev *dev, bool cleanup);
 static void nicvf_vf_stop(struct rte_eth_dev *dev, struct nicvf *nic,
 			  bool cleanup);
 
-static inline int
-nicvf_atomic_write_link_status(struct rte_eth_dev *dev,
-			       struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &dev->data->dev_link;
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-		*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
 
 static inline void
 nicvf_set_eth_link_status(struct nicvf *nic, struct rte_eth_link *link)
@@ -142,7 +128,9 @@ nicvf_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 		memset(&link, 0, sizeof(link));
 		nicvf_set_eth_link_status(nic, &link);
 	}
-	return nicvf_atomic_write_link_status(dev, &link);
+
+	rte_eth_linkstatus_set(dev, &link);
+	return 0;
 }
 
 static int
-- 
2.15.1

[dpdk-dev] [PATCH v4 13/15] net/szedata: use _rte_eth_linkstatus_set

[Stephen Hemminger]

Yet another driver which was not returing correct value on
link change.

Since this driver can't be built on x86 could not even
do a compile test.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/szedata2/rte_eth_szedata2.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/net/szedata2/rte_eth_szedata2.c b/drivers/net/szedata2/rte_eth_szedata2.c
index 74f151c4ad8e..c902e29d8ff2 100644
--- a/drivers/net/szedata2/rte_eth_szedata2.c
+++ b/drivers/net/szedata2/rte_eth_szedata2.c
@@ -50,7 +50,6 @@
 #include <rte_memcpy.h>
 #include <rte_kvargs.h>
 #include <rte_dev.h>
-#include <rte_atomic.h>
 
 #include "rte_eth_szedata2.h"
 #include "szedata2_iobuf.h"
@@ -1173,14 +1172,15 @@ static int
 eth_link_update(struct rte_eth_dev *dev,
 		int wait_to_complete __rte_unused)
 {
-	struct rte_eth_link link;
-	struct rte_eth_link *link_ptr = &link;
-	struct rte_eth_link *dev_link = &dev->data->dev_link;
 	struct pmd_internals *internals = (struct pmd_internals *)
 		dev->data->dev_private;
 	const volatile struct szedata2_ibuf *ibuf;
 	uint32_t i;
 	bool link_is_up = false;
+	struct rte_eth_link link = {
+		.link_duplex = ETH_LINK_FULL_DUPLEX,
+		.link_autoneg = ETH_LINK_SPEED_FIXED,
+	};
 
 	switch (get_link_speed(internals)) {
 	case SZEDATA2_LINK_SPEED_10G:
@@ -1197,9 +1197,6 @@ eth_link_update(struct rte_eth_dev *dev,
 		break;
 	}
 
-	/* szedata2 uses only full duplex */
-	link.link_duplex = ETH_LINK_FULL_DUPLEX;
-
 	for (i = 0; i < szedata2_ibuf_count; i++) {
 		ibuf = ibuf_ptr_by_index(internals->pci_rsc, i);
 		/*
@@ -1212,13 +1209,9 @@ eth_link_update(struct rte_eth_dev *dev,
 		}
 	}
 
-	link.link_status = (link_is_up) ? ETH_LINK_UP : ETH_LINK_DOWN;
-
-	link.link_autoneg = ETH_LINK_SPEED_FIXED;
-
-	rte_atomic64_cmpset((uint64_t *)dev_link, *(uint64_t *)dev_link,
-			*(uint64_t *)link_ptr);
+	link.link_status = link_is_up ? ETH_LINK_UP : ETH_LINK_DOWN;
 
+	rte_eth_linkstatus_set(dev, &link);
 	return 0;
 }
 
-- 
2.15.1

[dpdk-dev] [PATCH v4 14/15] net/octeontx: use rte_eth_linkstatus_set

[Stephen Hemminger]

Common function matches this drivers usage.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/octeontx/octeontx_ethdev.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
index 4f71f9def7e9..fd03d22646f4 100644
--- a/drivers/net/octeontx/octeontx_ethdev.c
+++ b/drivers/net/octeontx/octeontx_ethdev.c
@@ -463,20 +463,6 @@ octeontx_dev_promisc_disable(struct rte_eth_dev *dev)
 	octeontx_port_promisc_set(nic, 0);
 }
 
-static inline int
-octeontx_atomic_write_link_status(struct rte_eth_dev *dev,
-				  struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &dev->data->dev_link;
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-		*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 static int
 octeontx_port_link_status(struct octeontx_nic *nic)
 {
@@ -548,7 +534,8 @@ octeontx_dev_link_update(struct rte_eth_dev *dev,
 	link.link_duplex = ETH_LINK_AUTONEG;
 	link.link_autoneg = ETH_LINK_SPEED_AUTONEG;
 
-	return octeontx_atomic_write_link_status(dev, &link);
+	rte_eth_linkstatus_set(dev, &link);
+	return 0;
 }
 
 static int
-- 
2.15.1

[dpdk-dev] [PATCH v4 15/15] net/enic: use rte_eth_linkstatus_set

[Stephen Hemminger]

This driver was not doing atomic update of link status information.
And the return value was different than others.
The hardware also does not do autonegotiation (at least on Linux).

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/enic/enic_ethdev.c |  5 ++---
 drivers/net/enic/enic_main.c   | 17 ++++++++---------
 2 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 669dbf3363fd..68b625468b63 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -446,10 +446,9 @@ static void enicpmd_dev_stop(struct rte_eth_dev *eth_dev)
 
 	ENICPMD_FUNC_TRACE();
 	enic_disable(enic);
+
 	memset(&link, 0, sizeof(link));
-	rte_atomic64_cmpset((uint64_t *)&eth_dev->data->dev_link,
-		*(uint64_t *)&eth_dev->data->dev_link,
-		*(uint64_t *)&link);
+	rte_eth_linkstatus_set(eth_dev, &link);
 }
 
 /*
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 8af0ccd3cdcf..7674263c38cc 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -413,16 +413,15 @@ enic_free_consistent(void *priv,
 int enic_link_update(struct enic *enic)
 {
 	struct rte_eth_dev *eth_dev = enic->rte_dev;
-	int ret;
-	int link_status = 0;
+	struct rte_eth_link link = {
+		.link_status = enic_get_link_status(enic),
+		.link_duplex = ETH_LINK_FULL_DUPLEX,
+		.link_speed = vnic_dev_port_speed(enic->vdev),
+		.link_autoneg = ETH_LINK_FIXED,
+	};
 
-	link_status = enic_get_link_status(enic);
-	ret = (link_status == enic->link_status);
-	enic->link_status = link_status;
-	eth_dev->data->dev_link.link_status = link_status;
-	eth_dev->data->dev_link.link_duplex = ETH_LINK_FULL_DUPLEX;
-	eth_dev->data->dev_link.link_speed = vnic_dev_port_speed(enic->vdev);
-	return ret;
+	rte_eth_linkstatus_set(eth_dev, &link);
+	return 0;
 }
 
 static void
-- 
2.15.1

[dpdk-dev] [PATCH v3 00/15] common ethdev linkstatus functions

[Stephen Hemminger]

While reviewing drivers, noticed a lot of unnecessary
duplication of code in drivers for handling the eth_dev link status
information. While consolidating this, it also became obvious that
some drivers behave differently for no good reason.

It also was a good chance to introduce atomic exchange primitives
in EAL because there are other places using cmpset where not
necessary (such as bonding).

Mostly only compile tested only, don't have all of the hardware
available (except ixgbe and virtio) to test.

v3
 - align rte_linkstatus_get with rte_atomic64_read
 - virtio use ETH_SPEED_NUM_10G
 - add net/
v2 
 - function names changed
 - rebased to current master


Stephen Hemminger (15):
  eal: introduce atomic exchange operation
  ethdev: add linkstatus get/set helper functions
  net/virtio: use eth_linkstatus_set
  net/vmxnet3: use rte_eth_linkstatus_set
  net/dpaa2: use rte_eth_linkstatus_set
  net/nfp: use rte_eth_linkstatus functions
  net/e1000: use rte_eth_linkstatus helpers
  net/ixgbe: use rte_eth_linkstatus functions
  net/sfc: use new rte_eth_linkstatus functions
  net/i40e: use rte_eth_linkstatus functions
  net/liquidio: use _rte_eth_linkstatus_set
  net/thunderx: use _rte_eth_linkstatus_set
  net/szedata: use _rte_eth_linkstatus_set
  net/octeontx: use rte_eth_linkstatus_set
  net/enic: use _rte_eth_linkstatus_set

 drivers/net/dpaa2/dpaa2_ethdev.c                   | 65 ++------------
 drivers/net/e1000/em_ethdev.c                      | 70 ++-------------
 drivers/net/e1000/igb_ethdev.c                     | 71 ++--------------
 drivers/net/enic/enic_ethdev.c                     |  5 +-
 drivers/net/enic/enic_main.c                       | 16 ++--
 drivers/net/i40e/i40e_ethdev.c                     | 44 ++--------
 drivers/net/i40e/i40e_ethdev_vf.c                  | 19 +----
 drivers/net/ixgbe/ixgbe_ethdev.c                   | 99 ++++------------------
 drivers/net/liquidio/lio_ethdev.c                  | 54 ++----------
 drivers/net/nfp/nfp_net.c                          | 75 ++--------------
 drivers/net/octeontx/octeontx_ethdev.c             | 16 +---
 drivers/net/sfc/sfc_ethdev.c                       | 27 ++----
 drivers/net/sfc/sfc_ev.c                           | 23 +----
 drivers/net/szedata2/rte_eth_szedata2.c            | 20 ++---
 drivers/net/thunderx/nicvf_ethdev.c                | 17 +---
 drivers/net/virtio/virtio_ethdev.c                 | 64 +++-----------
 drivers/net/vmxnet3/vmxnet3_ethdev.c               | 85 ++++---------------
 .../common/include/arch/x86/rte_atomic.h           | 24 ++++++
 .../common/include/arch/x86/rte_atomic_32.h        | 12 +++
 .../common/include/arch/x86/rte_atomic_64.h        | 12 +++
 lib/librte_eal/common/include/generic/rte_atomic.h | 78 +++++++++++++++++
 lib/librte_ether/rte_ethdev.c                      | 36 ++++++++
 lib/librte_ether/rte_ethdev.h                      | 28 ++++++
 23 files changed, 303 insertions(+), 657 deletions(-)

-- 
2.15.1

[dpdk-dev] [PATCH v4 01/15] eal: introduce atomic exchange operation

[Ferruh Yigit]

From: Stephen Hemminger <stephen@networkplumber.org>

To handle atomic update of link status (64 bit), every driver
was doing its own version using cmpset.
Atomic exchange is a useful primitive in its own right;
therefore make it a EAL routine.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 .../common/include/arch/x86/rte_atomic.h           | 24 +++++++
 .../common/include/arch/x86/rte_atomic_32.h        | 12 ++++
 .../common/include/arch/x86/rte_atomic_64.h        | 12 ++++
 lib/librte_eal/common/include/generic/rte_atomic.h | 78 ++++++++++++++++++++++
 4 files changed, 126 insertions(+)

diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic.h b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
index 8469f97e1..20d10cc18 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
@@ -59,6 +59,18 @@ rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
 	return res;
 }
 
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgw %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline int rte_atomic16_test_and_set(rte_atomic16_t *v)
 {
 	return rte_atomic16_cmpset((volatile uint16_t *)&v->cnt, 0, 1);
@@ -133,6 +145,18 @@ rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
 	return res;
 }
 
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgl %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline int rte_atomic32_test_and_set(rte_atomic32_t *v)
 {
 	return rte_atomic32_cmpset((volatile uint32_t *)&v->cnt, 0, 1);
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h b/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
index fb3abf187..8d711b6f6 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
@@ -98,6 +98,18 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 	return res;
 }
 
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dest, uint64_t val)
+{
+	uint64_t old;
+
+	do {
+		old = *dest;
+	} while (rte_atomic64_cmpset(dest, old, val));
+
+	return old;
+}
+
 static inline void
 rte_atomic64_init(rte_atomic64_t *v)
 {
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
index 1a53a766b..fd2ec9c53 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
@@ -71,6 +71,18 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 	return res;
 }
 
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgq %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline void
 rte_atomic64_init(rte_atomic64_t *v)
 {
diff --git a/lib/librte_eal/common/include/generic/rte_atomic.h b/lib/librte_eal/common/include/generic/rte_atomic.h
index 16af5ca57..97854df3d 100644
--- a/lib/librte_eal/common/include/generic/rte_atomic.h
+++ b/lib/librte_eal/common/include/generic/rte_atomic.h
@@ -139,6 +139,32 @@ rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val)
+{
+	return __atomic_exchange_2(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
@@ -392,6 +418,32 @@ rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val)
+{
+	return __atomic_exchange_4(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
@@ -644,6 +696,32 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val)
+{
+	return __atomic_exchange_4(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
-- 
2.14.3

[dpdk-dev] [PATCH v4 05/15] net/dpaa2: use rte_eth_linkstatus_set

[Ferruh Yigit]

From: Stephen Hemminger <stephen@networkplumber.org>

Use new helper function to update the link status.
As a good side effect this fixes a but because this driver was not
returning correct status (should be -1 in link_status changed).

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/dpaa2/dpaa2_ethdev.c | 65 +++++-----------------------------------
 1 file changed, 7 insertions(+), 58 deletions(-)

diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index 821c8622e..73d5605c1 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -57,58 +57,6 @@ static int dpaa2_dev_set_link_up(struct rte_eth_dev *dev);
 static int dpaa2_dev_set_link_down(struct rte_eth_dev *dev);
 static int dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-dpaa2_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				  struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &dev->data->dev_link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-dpaa2_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				   struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &dev->data->dev_link;
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-				*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
 static int
 dpaa2_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 {
@@ -837,7 +785,7 @@ dpaa2_dev_stop(struct rte_eth_dev *dev)
 
 	/* clear the recorded link status */
 	memset(&link, 0, sizeof(link));
-	dpaa2_dev_atomic_write_link_status(dev, &link);
+	_rte_eth_linkstatus_set(dev, &link);
 }
 
 static void
@@ -869,7 +817,7 @@ dpaa2_dev_close(struct rte_eth_dev *dev)
 	}
 
 	memset(&link, 0, sizeof(link));
-	dpaa2_dev_atomic_write_link_status(dev, &link);
+	_rte_eth_linkstatus_set(dev, &link);
 }
 
 static void
@@ -1327,8 +1275,8 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return 0;
 	}
-	memset(&old, 0, sizeof(old));
-	dpaa2_dev_atomic_read_link_status(dev, &old);
+
+	_rte_eth_linkstatus_get(dev, &old);
 
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret < 0) {
@@ -1350,13 +1298,14 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 	else
 		link.link_duplex = ETH_LINK_FULL_DUPLEX;
 
-	dpaa2_dev_atomic_write_link_status(dev, &link);
+	ret = _rte_eth_linkstatus_set(dev, &link);
 
 	if (link.link_status)
 		PMD_DRV_LOG(INFO, "Port %d Link is Up\n", dev->data->port_id);
 	else
 		PMD_DRV_LOG(INFO, "Port %d Link is Down", dev->data->port_id);
-	return 0;
+
+	return ret;
 }
 
 /**
-- 
2.14.3

Re: [dpdk-dev] [PATCH v4 05/15] net/dpaa2: use rte_eth_linkstatus_set

[Shreyansh Jain]

On Thursday 11 January 2018 10:36 PM, Ferruh Yigit wrote:
> From: Stephen Hemminger <stephen@networkplumber.org>
> 
> Use new helper function to update the link status.
> As a good side effect this fixes a but because this driver was not
                               ^^^^^^
                           needs rephrasing

> returning correct status (should be -1 in link_status changed).
> 
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
> ---
>   drivers/net/dpaa2/dpaa2_ethdev.c | 65 +++++-----------------------------------
>   1 file changed, 7 insertions(+), 58 deletions(-)

Other than the change in commit message highlighted above:

Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

Thanks.

Re: [dpdk-dev] [PATCH v4 05/15] net/dpaa2: use rte_eth_linkstatus_set

[Shreyansh Jain]

On Tuesday 16 January 2018 03:14 PM, Shreyansh Jain wrote:
> On Thursday 11 January 2018 10:36 PM, Ferruh Yigit wrote:
>> From: Stephen Hemminger <stephen@networkplumber.org>
>>
>> Use new helper function to update the link status.
>> As a good side effect this fixes a but because this driver was not
>                                ^^^^^^
>                            needs rephrasing
> 
>> returning correct status (should be -1 in link_status changed).
>>
>> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
>> ---
>>   drivers/net/dpaa2/dpaa2_ethdev.c | 65 
>> +++++-----------------------------------
>>   1 file changed, 7 insertions(+), 58 deletions(-)
> 
> Other than the change in commit message highlighted above:
> 
> Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
> 
> Thanks.
> 

Also, I forgot to add in previous email, I am assuming 
_rte_eth_linkstatus_get would be rte_eth_linkstatus_get eventually.

I concur with your comments in [1] - it certainly would be better to 
have either @internal or _rte - and not both.

http://dpdk.org/ml/archives/dev/2018-January/086742.html