From: John Daley <johndale@cisco.com>
To: ferruh.yigit@intel.com
Cc: dev@dpdk.org, Hyong Youb Kim <hyonkim@cisco.com>
Subject: [dpdk-dev] [PATCH] net/enic: add a Tx prepare handler
Date: Mon, 22 Jan 2018 17:05:29 -0800 [thread overview]
Message-ID: <20180123010529.17748-3-johndale@cisco.com> (raw)
In-Reply-To: <20180123010529.17748-1-johndale@cisco.com>
From: Hyong Youb Kim <hyonkim@cisco.com>
Like most NICs, this hardware (Cisco VIC) also requires partial
checksum in the packet for checksum offload and TSO. So, add
the tx_pkt_prepare handler like other PMDs do.
Technically, VIC has an offload mode that does not require partial
checksum for non-TSO packets. But, it has no such mode for TSO
packets, making tx_pkt_prepare unavoidable.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
---
drivers/net/enic/enic.h | 2 ++
drivers/net/enic/enic_ethdev.c | 1 +
drivers/net/enic/enic_rxtx.c | 42 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 45 insertions(+)
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index c76a8f0af..c083985ee 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -268,6 +268,8 @@ uint16_t enic_dummy_recv_pkts(void *rx_queue,
uint16_t nb_pkts);
uint16_t enic_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
+uint16_t enic_prep_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
int enic_set_mtu(struct enic *enic, uint16_t new_mtu);
int enic_link_update(struct enic *enic);
void enic_fdir_info(struct enic *enic);
diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 2c356dc27..c46d592ed 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -641,6 +641,7 @@ static int eth_enicpmd_dev_init(struct rte_eth_dev *eth_dev)
eth_dev->dev_ops = &enicpmd_eth_dev_ops;
eth_dev->rx_pkt_burst = &enic_recv_pkts;
eth_dev->tx_pkt_burst = &enic_xmit_pkts;
+ eth_dev->tx_pkt_prepare = &enic_prep_pkts;
pdev = RTE_ETH_DEV_TO_PCI(eth_dev);
rte_eth_copy_pci_info(eth_dev, pdev);
diff --git a/drivers/net/enic/enic_rxtx.c b/drivers/net/enic/enic_rxtx.c
index 8157697a0..2fe5a3fa3 100644
--- a/drivers/net/enic/enic_rxtx.c
+++ b/drivers/net/enic/enic_rxtx.c
@@ -5,6 +5,7 @@
#include <rte_mbuf.h>
#include <rte_ethdev_driver.h>
+#include <rte_net.h>
#include <rte_prefetch.h>
#include "enic_compat.h"
@@ -14,6 +15,15 @@
#include <rte_ip.h>
#include <rte_tcp.h>
+#define ENIC_TX_OFFLOAD_MASK ( \
+ PKT_TX_VLAN_PKT | \
+ PKT_TX_IP_CKSUM | \
+ PKT_TX_L4_MASK | \
+ PKT_TX_TCP_SEG)
+
+#define ENIC_TX_OFFLOAD_NOTSUP_MASK \
+ (PKT_TX_OFFLOAD_MASK ^ ENIC_TX_OFFLOAD_MASK)
+
#define RTE_PMD_USE_PREFETCH
#ifdef RTE_PMD_USE_PREFETCH
@@ -433,6 +443,38 @@ unsigned int enic_cleanup_wq(__rte_unused struct enic *enic, struct vnic_wq *wq)
return 0;
}
+uint16_t enic_prep_pkts(__rte_unused void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ int32_t ret;
+ uint16_t i;
+ uint64_t ol_flags;
+ struct rte_mbuf *m;
+
+ for (i = 0; i != nb_pkts; i++) {
+ m = tx_pkts[i];
+ ol_flags = m->ol_flags;
+ if (ol_flags & ENIC_TX_OFFLOAD_NOTSUP_MASK) {
+ rte_errno = -ENOTSUP;
+ return i;
+ }
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ ret = rte_validate_tx_offload(m);
+ if (ret != 0) {
+ rte_errno = ret;
+ return i;
+ }
+#endif
+ ret = rte_net_intel_cksum_prepare(m);
+ if (ret != 0) {
+ rte_errno = ret;
+ return i;
+ }
+ }
+
+ return i;
+}
+
uint16_t enic_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts)
{
--
2.12.0
next prev parent reply other threads:[~2018-01-23 1:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-23 1:05 [dpdk-dev] [PATCH] net/enic: set L4 checksum flags for IPv6 packets John Daley
2018-01-23 1:05 ` [dpdk-dev] [PATCH] net/enic: fix segfault due to static max number of queues John Daley
2018-01-24 17:19 ` Ferruh Yigit
2018-01-23 1:05 ` John Daley [this message]
2018-01-24 17:20 ` [dpdk-dev] [PATCH] net/enic: add a Tx prepare handler Ferruh Yigit
2018-01-24 17:18 ` [dpdk-dev] [PATCH] net/enic: set L4 checksum flags for IPv6 packets Ferruh Yigit
2018-01-24 17:30 ` Hyong Youb Kim
2018-01-24 17:45 ` Ferruh Yigit
2018-01-24 17:48 ` Hyong Youb Kim
2018-01-24 17:48 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180123010529.17748-3-johndale@cisco.com \
--to=johndale@cisco.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hyonkim@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).