DPDK patches and discussions
 help / color / mirror / Atom feed
From: Shahaf Shuler <shahafs@mellanox.com>
To: nelio.laranjeiro@6wind.com, adrien.mazarguil@6wind.com,
	yskoh@mellanox.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2] net/mlx5: fix link state on device start
Date: Thu, 25 Jan 2018 18:04:28 +0200	[thread overview]
Message-ID: <20180125160428.146069-1-shahafs@mellanox.com> (raw)
In-Reply-To: <20180123170106.9047-1-shahafs@mellanox.com>

Following commit c7bf62255edf ("net/mlx5: fix handling link status event")
the link state must be up in order for the burst function to be set on
the device ops.

As the link may take time to move between down and up state it is
possible the rte_eth_dev_start call will return with wrong burst
function (either null or the empty burst function).

Fixing it by forcing the link to be up before returning from device
start. In case the link is still not up after 5 seconds fail the function.
In addition initialize the burst function on device probe to prevent
crashes before the link is up.

Fixes: c7bf62255edf ("net/mlx5: fix handling link status event")
Cc: yskoh@mellanox.com

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
 drivers/net/mlx5/mlx5.c         |  5 +++++
 drivers/net/mlx5/mlx5.h         |  1 +
 drivers/net/mlx5/mlx5_defs.h    |  3 +++
 drivers/net/mlx5/mlx5_ethdev.c  | 27 +++++++++++++++++++++++++++
 drivers/net/mlx5/mlx5_trigger.c |  8 +++++++-
 5 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index bc4b6bad0..62fa52434 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -862,6 +862,11 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
 		eth_dev->device = &pci_dev->device;
 		rte_eth_copy_pci_info(eth_dev, pci_dev);
 		eth_dev->device->driver = &mlx5_driver.driver;
+		/*
+		 * Initialize burst functions to prevent crashes before link-up.
+		 */
+		eth_dev->rx_pkt_burst = removed_rx_burst;
+		eth_dev->tx_pkt_burst = removed_tx_burst;
 		priv->dev = eth_dev;
 		eth_dev->dev_ops = &mlx5_dev_ops;
 		/* Register MAC address. */
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index a7ec607c3..30b737f76 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -246,6 +246,7 @@ int mlx5_dev_configure(struct rte_eth_dev *);
 void mlx5_dev_infos_get(struct rte_eth_dev *, struct rte_eth_dev_info *);
 const uint32_t *mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev);
 int priv_link_update(struct priv *, int);
+int priv_force_link_status_change(struct priv *, int);
 int mlx5_link_update(struct rte_eth_dev *, int);
 int mlx5_dev_set_mtu(struct rte_eth_dev *, uint16_t);
 int mlx5_dev_get_flow_ctrl(struct rte_eth_dev *, struct rte_eth_fc_conf *);
diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
index a71db281d..57f295c58 100644
--- a/drivers/net/mlx5/mlx5_defs.h
+++ b/drivers/net/mlx5/mlx5_defs.h
@@ -110,4 +110,7 @@
 /* Supported RSS */
 #define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))
 
+/* Maximum number of attempts to query link status before giving up. */
+#define MLX5_MAX_LINK_QUERY_ATTEMPTS 5
+
 #endif /* RTE_PMD_MLX5_DEFS_H_ */
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 6624888c9..5694136c9 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -966,6 +966,33 @@ priv_link_update(struct priv *priv, int wait_to_complete)
 }
 
 /**
+ * Querying the link status till it changes to the desired state.
+ * Number of query attempts is bounded by MLX5_MAX_LINK_QUERY_ATTEMPTS.
+ *
+ * @param priv
+ *   Pointer to private structure.
+ * @param status
+ *   Link desired status.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+int
+priv_force_link_status_change(struct priv *priv, int status)
+{
+	int try = 0;
+
+	while (try < MLX5_MAX_LINK_QUERY_ATTEMPTS) {
+		priv_link_update(priv, 0);
+		if (priv->dev->data->dev_link.link_status == status)
+			return 0;
+		try++;
+		sleep(1);
+	}
+	return -EAGAIN;
+}
+
+/**
  * DPDK callback to retrieve physical link information.
  *
  * @param dev
diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index 827db2e7e..c5429e182 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -166,7 +166,13 @@ mlx5_dev_start(struct rte_eth_dev *dev)
 	priv_xstats_init(priv);
 	/* Update link status and Tx/Rx callbacks for the first time. */
 	memset(&dev->data->dev_link, 0, sizeof(struct rte_eth_link));
-	priv_link_update(priv, 1);
+	INFO("Forcing port %u link to be up", dev->data->port_id);
+	err = priv_force_link_status_change(priv, ETH_LINK_UP);
+	if (err) {
+		DEBUG("Failed to set port %u link to be up",
+		      dev->data->port_id);
+		goto error;
+	}
 	priv_dev_interrupt_handler_install(priv, dev);
 	priv_unlock(priv);
 	return 0;
-- 
2.12.0

  parent reply	other threads:[~2018-01-25 16:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-23 17:01 [dpdk-dev] [PATCH] " Shahaf Shuler
2018-01-24  8:01 ` Nélio Laranjeiro
2018-01-25 16:04 ` Shahaf Shuler [this message]
2018-01-25 16:20   ` [dpdk-dev] [PATCH v2] " Shahaf Shuler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180125160428.146069-1-shahafs@mellanox.com \
    --to=shahafs@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=nelio.laranjeiro@6wind.com \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).